Граф коммитов

78 Коммитов

Автор SHA1 Сообщение Дата
Artem Bityutskiy 840dc6b891 UBIFS: improve arguments checking in debugging messages
Use "if (0) printk()" construct in debugging print macros to
make the debugging messages be checked even if debugging is
off.

This patch also removes some unneeded spaces and blank lines.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-08-13 11:42:47 +03:00
Adrian Hunter 81ffa38e15 UBIFS: always set i_generation to 0
UBIFS does not presently re-use inode numbers, so leaving
i_generation zero is most appropriate for now.

Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-08-13 11:39:53 +03:00
Adrian Hunter 3a13252c6f UBIFS: correct spelling of "thrice".
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
2008-08-13 11:39:20 +03:00
Zoltan Sogor 22bc7fa8c5 UBIFS: support splice_write
Signed-off-by: Zoltan Sogor <weth@inf.u-szeged.hu>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-08-13 11:38:43 +03:00
Artem Bityutskiy 0010f18afc UBIFS: minor tweaks in commit
No functional changes, just lessen the amount of indentations.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-08-13 11:38:19 +03:00
Artem Bityutskiy b364b41aeb UBIFS: reserve more space for index
At the moment UBIFS reserves twice old index size space for the
index. But this is not enough in some cases, because if the indexing
node are very fragmented and there are many small gaps, while the
dirty index has big znodes - in-the-gaps method would fail.

Thus, reserve trise as more, in which case we are guaranteed that
we can commit in any case.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-08-13 11:37:28 +03:00
Artem Bityutskiy 1de9415906 UBIFS: print pid in dump function
Useful when something fails and there are many processes
racing.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-08-13 11:35:58 +03:00
Artem Bityutskiy dab4b4d2f9 UBIFS: align inode data to eight
UBIFS aligns node lengths to 8, so budgeting has to do the
same. Well, direntry, inode, and page budgets are already
aligned, but not inode data budget (e.g., data in special
devices or symlinks). Do this for inode data as well.
Also, add corresponding debugging checks.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-08-13 11:35:16 +03:00
Artem Bityutskiy 547000da64 UBIFS: improve budgeting checks
Budgeting is a crucial UBIFS subsystem - add more assertions
to improve requests checking. This is not compiled in when
UBIFS debugging is disabled.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-08-13 11:34:27 +03:00
Adrian Hunter f769108424 UBIFS: correct orphan deletion order
The debug function that checks orphans, does so using the
TNC mutex. That means it will not see a correct picture
if the inode is removed from the orphan tree before it is
removed from TNC.

Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
2008-08-13 11:32:53 +03:00
Adrian Hunter 7d62ff2c39 UBIFS: fix typos in comments
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
2008-08-13 11:32:21 +03:00
Adrian Hunter bc813355c7 UBIFS: do not union creat_sqnum and del_cmtno
The values in these two fields need to be preserved independently
and so a union cannot be used.

Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
2008-08-13 11:30:04 +03:00
Artem Bityutskiy de94eb558b UBIFS: optimize deletions
Every time anything is deleted, UBIFS writes the deletion inode
node twice - once in 'ubifs_jnl_update()' and the second time in
'ubifs_jnl_write_inode()'. However, the second write is not needed
if no commit happened after 'ubifs_jnl_update()'. This patch
checks that condition and avoids writing the deletion inode for
the second time.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-08-13 11:28:44 +03:00
Artem Bityutskiy 014eb04b03 UBIFS: increment commit number earlier
Increment the commit number at the beginnig of the commit, instead
of doing this after the commit. This is needed for further
optimizations.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-08-13 11:27:47 +03:00
Artem Bityutskiy fd6c6b51e3 UBIFS: remove another unneeded function parameter
The 'last_reference' parameter of 'pack_inode()' is not really
needed because 'inode->i_nlink' may be tested instead. Zap it.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-08-13 11:27:10 +03:00
Artem Bityutskiy 1f28681ad3 UBIFS: remove unneeded function parameter
Simplify 'ubifs_jnl_write_inode()' by removing the 'deletion'
parameter which is not really needed because we may test
inode->i_nlink and check whether this is a deletion or not.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-08-13 11:26:25 +03:00
Artem Bityutskiy fbfa6c884a UBIFS: do not write orphans back
Orphan inodes are deleted inodes which will disappear after FS
re-mount. There is not need to write orphan inodes back, because
they are not needed on the flash media.

So optimize orphans a little by not writing them back. Just mark
them as clean, free the budget, and report success to VFS.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-08-13 11:25:27 +03:00
Adrian Hunter ff46d7b3e0 UBIFS: make ubifs_ro_mode() not inline
We use ubifs_ro_mode() quite a lot, and not in fast-path, so
there is no reason to blow the code up by having it inlined.
Also, we usually want R/O mode change to be seen to other
CPUs as soon as possible, so when we make this a function
call, we will automatically have a memory barrier.

Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-08-13 11:24:26 +03:00
Adrian Hunter 2fb42b11f6 UBIFS: ensure UBIFS switches to read-only on error
UBI transparently handles write errors by automatically copying
and remapping the affected eraseblock. If UBI is unable to do
that, for example its pool of eraseblocks reserved for bad block
handling is empty, then the error is propagated to UBIFS. UBIFS
must protect the media from falling into an inconsistent state
by immediately switching to read-only mode. In the case of log
updates, this was not being done.

Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
2008-08-13 11:24:00 +03:00
Adrian Hunter 16dfd804b4 UBIFS: fix error return in failure mode
UBIFS recovery testing debug facility simulates media failures.
When simulating an IO error, the error code returned must be
-EIO but it was not always if the user switched off the
debug recovery testing option at the same time.

Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
2008-08-13 11:22:41 +03:00
Artem Bityutskiy 1e0f358e29 UBIFS: free budget in delete_inode as well
Although the inode is marked as clean when it is being deleted,
it might stay and be used as orphan, and be marked as dirty.
So we have to free the budget when we delete it.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-08-13 11:22:09 +03:00
Artem Bityutskiy 7d32c2bb14 UBIFS: improve debugging
1. Print inode mode in some of debugging messages
2. Add few more useful assertions

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-08-13 11:20:07 +03:00
Artem Bityutskiy 182854b46f UBIFS: fix budgeting calculations
The 'ubifs_release_dirty_inode_budget()' was buggy and incorrectly
freed the budget, which led to not freeing all dirty data budget.
This patch fixes that.

Also, this patch fixes ubifs_mkdir() which passed 1 in dirty_ino_d,
which makes no sense. Well, it is harmless though.

Also, add few more useful assertions. And improve few debugging
messages.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-08-13 11:20:05 +03:00
Artem Bityutskiy ce769caa50 UBIFS: print volume name as well
We encouredge people to mount using volume name, not device
numbers. So print the name of the mounted UBI volume, not just
IDs.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-08-13 11:15:50 +03:00
Al Viro 3f8206d496 [PATCH] get rid of indirect users of namei.h
fs.h needs path.h, not namei.h; nfs_fs.h doesn't need it at all.
Several places in the tree needed direct include.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-07-26 20:53:42 -04:00
Alexey Dobriyan 51cc50685a SL*B: drop kmem cache argument from constructor
Kmem cache passed to constructor is only needed for constructors that are
themselves multiplexeres.  Nobody uses this "feature", nor does anybody uses
passed kmem cache in non-trivial way, so pass only pointer to object.

Non-trivial places are:
	arch/powerpc/mm/init_64.c
	arch/powerpc/mm/hugetlbpage.c

This is flag day, yes.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Jon Tollefson <kniht@linux.vnet.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Matt Mackall <mpm@selenic.com>
[akpm@linux-foundation.org: fix arch/powerpc/mm/hugetlbpage.c]
[akpm@linux-foundation.org: fix mm/slab.c]
[akpm@linux-foundation.org: fix ubifs]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 12:00:07 -07:00
Artem Bityutskiy 0d7eff873c UBIFS: include to compilation
Add UBIFS to Makefile and Kbuild.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
2008-07-15 17:35:24 +03:00
Artem Bityutskiy 1e51764a3c UBIFS: add new flash file system
This is a new flash file system. See
http://www.linux-mtd.infradead.org/doc/ubifs.html

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
2008-07-15 17:35:15 +03:00