Граф коммитов

42 Коммитов

Автор SHA1 Сообщение Дата
Tom Zanussi f306cc82a9 tracing: Update event filters for multibuffer
The trace event filters are still tied to event calls rather than
event files, which means you don't get what you'd expect when using
filters in the multibuffer case:

Before:

  # echo 'bytes_alloc > 8192' > /sys/kernel/debug/tracing/events/kmem/kmalloc/filter
  # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/filter
  bytes_alloc > 8192
  # mkdir /sys/kernel/debug/tracing/instances/test1
  # echo 'bytes_alloc > 2048' > /sys/kernel/debug/tracing/instances/test1/events/kmem/kmalloc/filter
  # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/filter
  bytes_alloc > 2048
  # cat /sys/kernel/debug/tracing/instances/test1/events/kmem/kmalloc/filter
  bytes_alloc > 2048

Setting the filter in tracing/instances/test1/events shouldn't affect
the same event in tracing/events as it does above.

After:

  # echo 'bytes_alloc > 8192' > /sys/kernel/debug/tracing/events/kmem/kmalloc/filter
  # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/filter
  bytes_alloc > 8192
  # mkdir /sys/kernel/debug/tracing/instances/test1
  # echo 'bytes_alloc > 2048' > /sys/kernel/debug/tracing/instances/test1/events/kmem/kmalloc/filter
  # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/filter
  bytes_alloc > 8192
  # cat /sys/kernel/debug/tracing/instances/test1/events/kmem/kmalloc/filter
  bytes_alloc > 2048

We'd like to just move the filter directly from ftrace_event_call to
ftrace_event_file, but there are a couple cases that don't yet have
multibuffer support and therefore have to continue using the current
event_call-based filters.  For those cases, a new USE_CALL_FILTER bit
is added to the event_call flags, whose main purpose is to keep the
old behavior for those cases until they can be updated with
multibuffer support; at that point, the USE_CALL_FILTER flag (and the
new associated call_filter_check_discard() function) can go away.

The multibuffer support also made filter_current_check_discard()
redundant, so this change removes that function as well and replaces
it with filter_check_discard() (or call_filter_check_discard() as
appropriate).

Link: http://lkml.kernel.org/r/f16e9ce4270c62f46b2e966119225e1c3cca7e60.1382620672.git.tom.zanussi@linux.intel.com

Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-11-05 16:50:20 -05:00
zhangwei(Jovi) 146c3442f2 tracing: Use trace_seq_puts()/trace_seq_putc() where possible
For string without format specifiers, use trace_seq_puts()
or trace_seq_putc().

Link: http://lkml.kernel.org/r/51E3B3AC.1000605@huawei.com

Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
[ fixed a trace_seq_putc(s, " ") to trace_seq_putc(s, ' ') ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-07-18 21:30:36 -04:00
Steven Rostedt (Red Hat) 12883efb67 tracing: Consolidate max_tr into main trace_array structure
Currently, the way the latency tracers and snapshot feature works
is to have a separate trace_array called "max_tr" that holds the
snapshot buffer. For latency tracers, this snapshot buffer is used
to swap the running buffer with this buffer to save the current max
latency.

The only items needed for the max_tr is really just a copy of the buffer
itself, the per_cpu data pointers, the time_start timestamp that states
when the max latency was triggered, and the cpu that the max latency
was triggered on. All other fields in trace_array are unused by the
max_tr, making the max_tr mostly bloat.

This change removes the max_tr completely, and adds a new structure
called trace_buffer, that holds the buffer pointer, the per_cpu data
pointers, the time_start timestamp, and the cpu where the latency occurred.

The trace_array, now has two trace_buffers, one for the normal trace and
one for the max trace or snapshot. By doing this, not only do we remove
the bloat from the max_trace but the instances of traces can now use
their own snapshot feature and not have just the top level global_trace have
the snapshot feature and latency tracers for itself.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-15 00:35:40 -04:00
Steven Rostedt a7603ff4b5 tracing: Replace the static global per_cpu arrays with allocated per_cpu
The global and max-tr currently use static per_cpu arrays for the CPU data
descriptors. But in order to get new allocated trace_arrays, they need to
be allocated per_cpu arrays. Instead of using the static arrays, switch
the global and max-tr to use allocated data.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-15 00:34:43 -04:00
Arun Sharma 60063497a9 atomic: use <linux/atomic.h>
This allows us to move duplicated code in <asm/atomic.h>
(atomic_inc_not_zero() for now) to <linux/atomic.h>

Signed-off-by: Arun Sharma <asharma@fb.com>
Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26 16:49:47 -07:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Steven Rostedt 60ba770227 tracing: add filter event logic to special, mmiotrace and boot tracers
Now that the pluging tracers use macros to create the structures and
automate the exporting of their formats to the format files, they also
automatically get a filter file.

This patch adds the code to implement the filter logic in the trace
recordings.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-09-12 23:34:04 -04:00
Steven Rostedt e77405ad80 tracing: pass around ring buffer instead of tracer
The latency tracers (irqsoff and wakeup) can swap trace buffers
on the fly. If an event is happening and has reserved data on one of
the buffers, and the latency tracer swaps the global buffer with the
max buffer, the result is that the event may commit the data to the
wrong buffer.

This patch changes the API to the trace recording to be recieve the
buffer that was used to reserve a commit. Then this buffer can be passed
in to the commit.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-09-04 18:59:39 -04:00
Li Zefan a5dec5573f tracing: use macros to denote usec and nsec per second
Impact: cleanup

Use USEC_PER_SEC and NSEC_PER_SEC instead of 1000000 and 1000000000.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <49CC7870.9000309@cn.fujitsu.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-07 14:43:06 +02:00
Steven Rostedt 40ce74f19c tracing: remove recording function depth from trace_printk
The function depth in trace_printk was to facilitate the function
graph output. Now that the function graph calculates the depth within
the trace output, we no longer need to record the depth when the
trace_printk is called.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-19 15:58:47 -04:00
Frederic Weisbecker 48ead02030 tracing/core: bring back raw trace_printk for dynamic formats strings
Impact: fix callsites with dynamic format strings

Since its new binary implementation, trace_printk() internally uses static
containers for the format strings on each callsites. But the value is
assigned once at build time, which means that it can't take dynamic
formats.

So this patch unearthes the raw trace_printk implementation for the callers
that will need trace_printk to be able to carry these dynamic format
strings. The trace_printk() macro will use the appropriate implementation
for each callsite. Most of the time however, the binary implementation will
still be used.

The other impact of this patch is that mmiotrace_printk() will use the old
implementation because it calls the low level trace_vprintk and we can't
guess here whether the format passed in it is dynamic or not.

Some parts of this patch have been written by Steven Rostedt (most notably
the part that chooses the appropriate implementation for each callsites).

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-12 21:15:00 -04:00
Frederic Weisbecker 769b0441f4 tracing/core: drop the old trace_printk() implementation in favour of trace_bprintk()
Impact: faster and lighter tracing

Now that we have trace_bprintk() which is faster and consume lesser
memory than trace_printk() and has the same purpose, we can now drop
the old implementation in favour of the binary one from trace_bprintk(),
which means we move all the implementation of trace_bprintk() to
trace_printk(), so the Api doesn't change except that we must now use
trace_seq_bprintk() to print the TRACE_PRINT entries.

Some changes result of this:

- Previously, trace_bprintk depended of a single tracer and couldn't
  work without. This tracer has been dropped and the whole implementation
  of trace_printk() (like the module formats management) is now integrated
  in the tracing core (comes with CONFIG_TRACING), though we keep the file
  trace_printk (previously trace_bprintk.c) where we can find the module
  management. Thus we don't overflow trace.c

- changes some parts to use trace_seq_bprintk() to print TRACE_PRINT entries.

- change a bit trace_printk/trace_vprintk macros to support non-builtin formats
  constants, and fix 'const' qualifiers warnings. But this is all transparent for
  developers.

- etc...

V2:

- Rebase against last changes
- Fix mispell on the changelog

V3:

- Rebase against last changes (moving trace_printk() to kernel.h)

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1236356510-8381-5-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-06 17:59:12 +01:00
Arnaldo Carvalho de Melo 51a763dd84 tracing: Introduce trace_buffer_{lock_reserve,unlock_commit}
Impact: new API

These new functions do what previously was being open coded, reducing
the number of details ftrace plugin writers have to worry about.

It also standardizes the handling of stacktrace, userstacktrace and
other trace options we may introduce in the future.

With this patch, for instance, the blk tracer (and some others already
in the tree) can use the "userstacktrace" /d/tracing/trace_options
facility.

$ codiff /tmp/vmlinux.before /tmp/vmlinux.after
linux-2.6-tip/kernel/trace/trace.c:
  trace_vprintk              |   -5
  trace_graph_return         |  -22
  trace_graph_entry          |  -26
  trace_function             |  -45
  __ftrace_trace_stack       |  -27
  ftrace_trace_userstack     |  -29
  tracing_sched_switch_trace |  -66
  tracing_stop               |   +1
  trace_seq_to_user          |   -1
  ftrace_trace_special       |  -63
  ftrace_special             |   +1
  tracing_sched_wakeup_trace |  -70
  tracing_reset_online_cpus  |   -1
 13 functions changed, 2 bytes added, 355 bytes removed, diff: -353

linux-2.6-tip/block/blktrace.c:
  __blk_add_trace |  -58
 1 function changed, 58 bytes removed, diff: -58

linux-2.6-tip/kernel/trace/trace.c:
  trace_buffer_lock_reserve  |  +88
  trace_buffer_unlock_commit |  +86
 2 functions changed, 174 bytes added, diff: +174

/tmp/vmlinux.after:
 16 functions changed, 176 bytes added, 413 bytes removed, diff: -237

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Frédéric Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-06 01:01:41 +01:00
Arnaldo Carvalho de Melo 0a9877514c ring_buffer: remove unused flags parameter
Impact: API change, cleanup

>From ring_buffer_{lock_reserve,unlock_commit}.

$ codiff /tmp/vmlinux.before /tmp/vmlinux.after
linux-2.6-tip/kernel/trace/trace.c:
  trace_vprintk              |  -14
  trace_graph_return         |  -14
  trace_graph_entry          |  -10
  trace_function             |   -8
  __ftrace_trace_stack       |   -8
  ftrace_trace_userstack     |   -8
  tracing_sched_switch_trace |   -8
  ftrace_trace_special       |  -12
  tracing_sched_wakeup_trace |   -8
 9 functions changed, 90 bytes removed, diff: -90

linux-2.6-tip/block/blktrace.c:
  __blk_add_trace |   -1
 1 function changed, 1 bytes removed, diff: -1

/tmp/vmlinux.after:
 10 functions changed, 91 bytes removed, diff: -91

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Frédéric Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-06 01:01:40 +01:00
Steven Rostedt 5e4abc9839 trace: clean up format errors in calls to trace_seq_printf
After adding the printf format checking for trace_seq_printf, several
warnings now show up. This patch cleans them up.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-16 12:17:38 +01:00
Pekka Paalanen 173ed24ee2 mmiotrace: count events lost due to not recording
Impact: enhances lost events counting in mmiotrace

The tracing framework, or the ring buffer facility it uses, has a switch
to stop recording data. When recording is off, the trace events will be
lost. The framework does not count these, so mmiotrace has to count them
itself.

Signed-off-by: Pekka Paalanen <pq@iki.fi>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-11 04:01:30 +01:00
Steven Rostedt f0868d1e23 ftrace: set up trace event hash infrastructure
Impact: simplify/generalize/refactor trace.c

The trace.c file is becoming more difficult to maintain due to the
growing number of events. There is several formats that an event may
be printed. This patch sets up the infrastructure of an event hash to
allow for events to register how they should be printed.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-29 12:46:11 +01:00
Steven Rostedt c47956d9ae ftrace: remove obsolete print continue functionality
Impact: cleanup, remove obsolete code

Now that the ring buffer used by ftrace allows for variable length
entries, we do not need the 'cont' feature of the buffer.  This code
makes other parts of ftrace more complex and by removing this it
simplifies the ftrace code.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-29 12:46:10 +01:00
Pekka J Enberg 213cc06079 ftrace: introduce tracing_reset_online_cpus() helper
Impact: cleanup

This patch factors out common code from multiple tracers into a
tracing_reset_online_cpus() function and converts the tracers to use it.

Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-19 16:29:34 +01:00
Frederic Weisbecker 1fd8f2a3f9 tracing/function-graph-tracer: handle ftrace_printk entries
Handle the TRACE_PRINT entries from the function grapg tracer
and output them as a C comment just below the function that called
it, as if it was a comment inside this function.

Example with an ftrace_printk inside might_sleep() function:

void __might_sleep(char *file, int line)
{
	static unsigned long prev_jiffy;	/* ratelimiting */

	ftrace_printk("Hi I'm a comment in might_sleep() :-)");

A chunk of a resulting trace:

 0)               |        _reiserfs_free_block() {
 0)               |          reiserfs_read_bitmap_block() {
 0)               |            __bread() {
 0)               |              __getblk() {
 0)               |                __find_get_block() {
 0)   0.698 us    |                  mark_page_accessed();
 0)   2.267 us    |                }
 0)               |                __might_sleep() {
 0)               |                  /* Hi I'm a comment in might_sleep() :-) */
 0)   1.321 us    |                }
 0)   5.872 us    |              }
 0)   7.313 us    |            }
 0)   8.718 us    |          }

And this patch brings two minor fixes:

- The newline after a switch-out task has disappeared
- The "|" sign just before the cpu number on task-switch has been deleted.

 0)   0.616 us    |                pick_next_task_rt();
 0)   1.457 us    |                _spin_trylock();
 0)   0.653 us    |                _spin_unlock();
 0)   0.728 us    |                _spin_trylock();
 0)   0.631 us    |                _spin_unlock();
 0)   0.729 us    |                native_load_sp0();
 0)   0.593 us    |                native_load_tls();
 ------------------------------------------
 0)    cat-2834    =>   migrati-3
 ------------------------------------------

 0)               |    finish_task_switch() {
 0)   0.841 us    |      _spin_unlock_irq();
 0)   0.616 us    |      post_schedule_rt();
 0)   3.882 us    |    }

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-04 10:18:39 +01:00
Ingo Molnar 6f893fb2e8 Merge branches 'tracing/branch-tracer', 'tracing/fastboot', 'tracing/ftrace', 'tracing/function-return-tracer', 'tracing/power-tracer', 'tracing/powerpc', 'tracing/ring-buffer', 'tracing/stack-tracer' and 'tracing/urgent' into tracing/core 2008-11-24 17:46:24 +01:00
Pekka Paalanen 7ee1768ddb x86, mmiotrace: fix buffer overrun detection
Impact: fix mmiotrace overrun tracing

When ftrace framework moved to use the ring buffer facility, the buffer
overrun detection was broken after 2.6.27 by commit

| commit 3928a8a2d9
| Author: Steven Rostedt <rostedt@goodmis.org>
| Date:   Mon Sep 29 23:02:41 2008 -0400
|
|     ftrace: make work with new ring buffer
|
|     This patch ports ftrace over to the new ring buffer.

The detection is now fixed by using the ring buffer API.

When mmiotrace detects a buffer overrun, it will report the number of
lost events. People reading an mmiotrace log must know if something was
missed, otherwise the data may not make sense.

Signed-off-by: Pekka Paalanen <pq@iki.fi>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-23 20:33:23 +01:00
Frederic Weisbecker 1c80025a49 tracing/ftrace: change the type of the init() callback
Impact: extend the ->init() method with the ability to fail

This bring a way to know if the initialization of a tracer successed.
A tracer must return 0 on success and a traditional error (ie:
-ENOMEM) if it fails.

If a tracer fails to init, it is free to print a detailed warn. The
tracing api will not and switch to a new tracer will just return the
error from the init callback.

Note: this will be used for the return tracer.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-16 07:55:23 +01:00
Steven Rostedt c76f06945b ftrace: remove trace array ctrl
Impact: remove obsolete variable in trace_array structure

With the new start / stop method of ftrace, the ctrl variable
in the trace_array structure is now obsolete. Remove it.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-08 09:51:39 +01:00
Steven Rostedt bbf5b1a0ce ftrace: remove ctrl_update method
Impact: Remove the ctrl_update tracer method

With the new quick start/stop method of tracing, the ctrl_update
method is out of date.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-08 09:51:34 +01:00
Steven Rostedt 38697053fa ftrace: preempt disable over interrupt disable
With the new ring buffer infrastructure in ftrace, I'm trying to make
ftrace a little more light weight.

This patch converts a lot of the local_irq_save/restore into
preempt_disable/enable.  The original preempt count in a lot of cases
has to be sent in as a parameter so that it can be recorded correctly.
Some places were recording it incorrectly before anyway.

This is also laying the ground work to make ftrace a little bit
more reentrant, and remove all locking. The function tracers must
still protect from reentrancy.

Note: All the function tracers must be careful when using preempt_disable.
  It must do the following:

  resched = need_resched();
  preempt_disable_notrace();
  [...]
  if (resched)
	preempt_enable_no_resched_notrace();
  else
	preempt_enable_notrace();

The reason is that if this function traces schedule() itself, the
preempt_enable_notrace() will cause a schedule, which will lead
us into a recursive failure.

If we needed to reschedule before calling preempt_disable, we
should have already scheduled. Since we did not, this is most
likely that we should not and are probably inside a schedule
function.

If resched was not set, we still need to catch the need resched
flag being set when preemption was off and the if case at the
end will catch that for us.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14 10:39:09 +02:00
Steven Rostedt 7104f300c5 ftrace: type cast filter+verifier
The mmiotrace map had a bug that would typecast the entry from
the trace to the wrong type. That is a known danger of C typecasts,
there's absolutely zero checking done on them.

Help that problem a bit by using a GCC extension to implement a
type filter that restricts the types that a trace record can be
cast into, and by adding a dynamic check (in debug mode) to verify
the type of the entry.

This patch adds a macro to assign all entries of ftrace using the type
of the variable and checking the entry id. The typecasts are now done
in the macro for only those types that it knows about, which should
be all the types that are allowed to be read from the tracer.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14 10:39:07 +02:00
Frederic Weisbecker 07f4e4f790 tracing/ftrace: adapt mmiotrace to the new type of print_line
Adapt mmiotrace to the new print_line type.
By default, it ignores (and consumes) types it doesn't support.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Pekka Paalanen <pq@iki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14 10:39:02 +02:00
Steven Rostedt 777e208d40 ftrace: take advantage of variable length entries
Now that the underlining ring buffer for ftrace now hold variable length
entries, we can take advantage of this by only storing the size of the
actual event into the buffer. This happens to increase the number of
entries in the buffer dramatically.

We can also get rid of the "trace_cont" operation, but I'm keeping that
until we have no more users. Some of the ftrace tracers can now change
their code to adapt to this new feature.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14 10:38:59 +02:00
Steven Rostedt 3928a8a2d9 ftrace: make work with new ring buffer
This patch ports ftrace over to the new ring buffer.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14 10:38:57 +02:00
Pekka Paalanen fc5e27ae4b mmiotrace: handle TRACE_PRINT entries
Also make trace_seq_print_cont() non-static, and add a newline if the
seq buffer can't hold all data.

Signed-off-by: Pekka Paalanen <pq@iki.fi>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14 10:37:14 +02:00
Pekka Paalanen 9e57fb35d7 x86 mmiotrace: implement mmiotrace_printk()
Offer mmiotrace users a function to inject markers from inside the kernel.
This depends on the trace_vprintk() patch.

Signed-off-by: Pekka Paalanen <pq@iki.fi>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14 10:37:11 +02:00
Pekka Paalanen 45dcd8b8a8 ftrace: move mmiotrace functions out of trace.c
Moves the mmiotrace specific functions from trace.c to
trace_mmiotrace.c. Functions trace_wake_up(), tracing_get_trace_entry(),
and tracing_generic_entry_update() are therefore made available outside
trace.c.

Signed-off-by: Pekka Paalanen <pq@iki.fi>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14 10:37:04 +02:00
Steven Rostedt 2e2ca155cd ftrace: new continue entry - separate out from trace_entry
Some tracers will need to work with more than one entry. In order to do this
the trace_entry structure was split into two fields. One for the start of
all entries, and one to continue an existing entry.

The trace_entry structure now has a "field" entry that consists of the previous
content of the trace_entry, and a "cont" entry that is just a string buffer
the size of the "field" entry.

Thanks to Andrew Morton for suggesting this idea.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14 10:35:15 +02:00
Pekka Paalanen dee310d0ad x86 mmiotrace: use resource_size_t for phys addresses
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-24 11:27:36 +02:00
Pekka Paalanen e0fd5c2fa1 mmiotrace: do not print bogus pid for maps either
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-24 11:27:15 +02:00
Pekka Paalanen 2039238b79 mmiotrace: print overrun counts
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-24 11:27:08 +02:00
Pekka Paalanen d0a7e8ca5b mmiotrace: print header using the read hook.
Now the header is printed only for `trace_pipe' file.

Signed-off-by: Pekka Paalanen <pq@iki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-24 11:27:03 +02:00
Pekka Paalanen 736ca61fa8 x86 mmiotrace: Do not print bogus pid
Non-zero pid indicates the MMIO access originated in user space.
We do not catch that kind of accesses yet, so always print zero for now.

Signed-off-by: Pekka Paalanen <pq@iki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-24 11:26:00 +02:00
Pekka Paalanen 138295373c ftrace: mmiotrace update, #2
another weekend, another patch. This should apply on top of my previous patch
from March 23rd.

Summary of changes:
- Print PCI device list in output header
- work around recursive probe hits on SMP
- refactor dis/arm_kmmio_fault_page() and add check for page levels
- remove un/reference_kmmio(), the die notifier hook is registered
permanently into the list
- explicitly check for single stepping in die notifier callback

I have tested this version on my UP Athlon64 desktop with Nouveau, and
SMP Core 2 Duo laptop with the proprietary nvidia driver. Both systems
are 64-bit. One previously unknown bug crept into daylight: the ftrace
framework's output routines print the first entry last after buffer has
wrapped around.

The most important regressions compared to non-ftrace mmiotrace at this
time are:
- failure of trace_pipe file
- illegal lines in output file
- unaware of losing data due to buffer full

Personally I'd like to see these three solved before submitting to
mainline. Other issues may come up once we know when we lose events.

Signed-off-by: Pekka Paalanen <pq@iki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-24 11:25:16 +02:00
Pekka Paalanen bd8ac686c7 ftrace: mmiotrace, updates
here is a patch that makes mmiotrace work almost well within the tracing
framework. The patch applies on top of my previous patch. I have my own
output formatting in place now.

Summary of changes:
- fix the NULL dereference that was due to not calling tracing_reset()
- add print_line() callback into struct tracer
- implement print_line() for mmiotrace, producing up-to-spec text
- add my output header, but that is not really called in the right place
- rewrote the main structs in mmiotrace
- added two new trace entry types: TRACE_MMIO_RW and TRACE_MMIO_MAP
- made some functions in trace.c non-static
- check current==NULL in tracing_generic_entry_update()
- fix(?) comparison in trace_seq_printf()

Things seem to work fine except a few issues. Markers (text lines injected
into mmiotrace log) are missing, I did not feel hacking them in before we
have variable length entries. My output header is printed only for 'trace'
file, but not 'trace_pipe'. For some reason, despite my quick fix,
iter->trace is NULL in print_trace_line() when called from 'trace_pipe'
file, which means I don't get proper output formatting.

I only tried by loading nouveau.ko, which just detects the card, and that
is traced fine. I didn't try further. Map, two reads and unmap. Works
perfectly.

I am missing the information about overflows, I'd prefer to have a
counter for lost events. I didn't try, but I guess currently there is no
way of knowning when it overflows?

So, not too far from being fully operational, it seems :-)
And looking at the diffstat, there also is some 700-900 lines of user space
code that just became obsolete.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-24 11:24:53 +02:00
Pekka Paalanen f984b51e07 ftrace: add mmiotrace plugin
On Sat, 22 Mar 2008 13:07:47 +0100
Ingo Molnar <mingo@elte.hu> wrote:

> > > i'd suggest the following: pull x86.git and sched-devel.git into a
> > > single tree [the two will combine without rejects]. Then try to add a
> > > kernel/tracing/trace_mmiotrace.c ftrace plugin. The trace_sysprof.c
> > > plugin might be a good example.
> >
> > I did this and now I have mmiotrace enabled/disabled via the tracing
> > framework (what do we call this, since ftrace is one of the tracers?).
>
> cool! could you send the patches for that? (even if they are not fully
> functional yet)

Patch attached in the end. Nice to see how much code disappeared. I tried
to mark all the features I had to break with XXX-comments.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-24 11:22:43 +02:00