If an error occurs after a pci_enable_pcie_error_reporting() call, it must
be undone by a corresponding pci_disable_pcie_error_reporting() call, as
already done in the remove function.
Link: https://lore.kernel.org/r/77adb02cfea7f1364e5603ecf3930d8597ae356e.1623482155.git.christophe.jaillet@wanadoo.fr
Fixes: 3567f36a09 ("[SCSI] be2iscsi: Fix AER handling in driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
drivers/scsi/ufs/ufshcd.c:9770:12: warning: ‘ufshcd_rpmb_resume’ defined but not used [-Wunused-function]
static int ufshcd_rpmb_resume(struct device *dev)
^~~~~~~~~~~~~~~~~~
drivers/scsi/ufs/ufshcd.c:9037:12: warning: ‘ufshcd_wl_runtime_resume’ defined but not used [-Wunused-function]
static int ufshcd_wl_runtime_resume(struct device *dev)
^~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/ufs/ufshcd.c:9017:12: warning: ‘ufshcd_wl_runtime_suspend’ defined but not used [-Wunused-function]
static int ufshcd_wl_runtime_suspend(struct device *dev)
^~~~~~~~~~~~~~~~~~~~~~~~~
Move it into #ifdef block to fix this.
Link: https://lore.kernel.org/r/20210617031326.36908-1-yuehaibing@huawei.com
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit 122c81c563 ("scsi: bnx2fc: Return failure if io_req is already in
ABTS processing") made bnx2fc_eh_abort() return FAILED when io_req was
alrady in ABTS processing, regardless of the return value of
bnx2fc_abts_cleanup(). However, the change left the assignment of the
return value of bnx2fc_abts_cleanup(). Remove this.
This issue was discovered and resolved using Coverity Static Analysis
Security Testing (SAST) by Synopsys, Inc.
Link: https://lore.kernel.org/r/20210618164514.6299-1-sj38.park@gmail.com
Fixes: 122c81c563 ("scsi: bnx2fc: Return failure if io_req is already in ABTS processing")
Acked-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
While the disk state has nothing to do with partitions, BLKRRPART is used
to force a full revalidate after things like a disk format for historical
reasons. Restore that behavior.
Link: https://lore.kernel.org/r/20210617115504.1732350-1-hch@lst.de
Fixes: 471bd0af54 ("sd: use bdev_check_media_change")
Reported-by: Xiang Chen <chenxiang66@hisilicon.com>
Tested-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use "no-op" mailbox command to check if the adapter firmware is still
responsive.
Link: https://lore.kernel.org/r/20210619052427.6440-1-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When a sense code is present we should not override the SAM status; the
driver already sets it based on the response from the hypervisor.
In addition we should only copy the sense buffer if one is actually
provided by the hypervisor.
Link: https://lore.kernel.org/r/20210622091153.29231-1-hare@suse.de
Fixes: 464a00c9e0 ("scsi: core: Kill DRIVER_SENSE")
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Offlining a SATA device connected to a hisi SAS controller and then
scanning the host will result in detecting 255 non-existent devices:
# lsscsi
[2:0:0:0] disk ATA Samsung SSD 860 2B6Q /dev/sda
[2:0:1:0] disk ATA WDC WD2003FYYS-3 1D01 /dev/sdb
[2:0:2:0] disk SEAGATE ST600MM0006 B001 /dev/sdc
# echo "offline" > /sys/block/sdb/device/state
# echo "- - -" > /sys/class/scsi_host/host2/scan
# lsscsi
[2:0:0:0] disk ATA Samsung SSD 860 2B6Q /dev/sda
[2:0:1:0] disk ATA WDC WD2003FYYS-3 1D01 /dev/sdb
[2:0:1:1] disk ATA WDC WD2003FYYS-3 1D01 /dev/sdh
...
[2:0:1:255] disk ATA WDC WD2003FYYS-3 1D01 /dev/sdjb
After a REPORT LUN command issued to the offline device fails, the SCSI
midlayer tries to do a sequential scan of all devices whose LUN number is
not 0. However, SATA does not support LUN numbers at all.
Introduce a generic sas_slave_alloc() handler which will return -ENXIO for
SATA devices if the requested LUN number is larger than 0 and make libsas
drivers use this function as their .slave_alloc callback.
Link: https://lore.kernel.org/r/20210622034037.1467088-1-yuyufen@huawei.com
Reported-by: Wu Bo <wubo40@huawei.com>
Suggested-by: John Garry <john.garry@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since scsi_mq_alloc_queue() only has one caller, inline it. This change was
suggested by Christoph Hellwig.
Link: https://lore.kernel.org/r/20210622024654.12543-1-bvanassche@acm.org
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Ed Tsai <ed.tsai@mediatek.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The shifting of the u8 integer returned fom ahc_inb(ahc, port+3) by 24 bits
to the left will be promoted to a 32 bit signed int and then sign-extended
to a u64. In the event that the top bit of the u8 is set then all then all
the upper 32 bits of the u64 end up as also being set because of the
sign-extension. Fix this by casting the u8 values to a u64 before the 24
bit left shift.
[ This dates back to 2002, I found the offending commit from the git
history git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git,
commit f58eb66c0b0a ("Update aic7xxx driver to 6.2.10...") ]
Link: https://lore.kernel.org/r/20210621151727.20667-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Addresses-Coverity: ("Unintended sign extension")
vport is linked onto the driver's vport list at allocation, but failure
path fails to remove it from the list.
Change location of linkage until after complete vport completion.
Link: https://lore.kernel.org/r/20210619155729.20049-1-jsmart2021@gmail.com
Fixes: 692e5d73a8 ("scsi: elx: efct: LIO backend interface routines")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Co-developed-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Flags value is being set to a constant and ANDed with 0 which always
results in 0.
Remove the assignment line.
Link: https://lore.kernel.org/r/20210619155641.19942-1-jsmart2021@gmail.com
Fixes: 1628f5b497 ("scsi: elx: libefc_sli: Populate and post different WQEs")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Co-developed-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy(), memmove(), and memset(), avoid
intentionally reading across neighboring array fields.
SCtmp->sense_buffer is 96 bytes, but ecbptr->sense is 14 bytes. Instead of
over-reading ecbptr->sense, copy only the actual contents and zero pad the
remaining bytes, avoiding potential over-reads.
Link: https://lore.kernel.org/r/20210616212437.1727088-1-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy(), memmove(), and memset(), avoid
intentionally reading across neighboring array fields.
pcmd->sense_buffer is 96 bytes, and was being manually zero-filled.
However, struct SENSE_DATA is 18 bytes, with ccb->arcmsr_cdb.SenseData only
being 15 bytes, resulting in a 3 byte over-read.
Copy only the contents of ccb->arcmsr_cdb.SenseData and zero fill the
remainder, avoiding potential over-reads.
Link: https://lore.kernel.org/r/20210616212428.1726958-1-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy() avoid intentionally reading across
neighboring array fields.
scb->scsi_cmd->sense_buffer is 96 bytes:
#define SCSI_SENSE_BUFFERSIZE 96
tapeDCDB->sense_info is 56 bytes:
typedef struct {
...
uint8_t sense_info[56];
} IPS_DCDB_TABLE_TAPE, ...
scb->dcdb.sense_info is 64 bytes:
typedef struct {
...
uint8_t sense_info[64];
...
} IPS_DCDB_TABLE, ...
Copying 96 bytes from either was copying beyond the end of the respective
buffers, leading to potential memory content exposures. Correctly copy the
actual buffer contents and zero pad the remaining bytes.
Link: https://lore.kernel.org/r/20210616212408.1726812-1-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The function is missing a of_node_put() on node. Fix this by adding the
call before returning.
Link: https://lore.kernel.org/r/1623929522-4389-1-git-send-email-zou_wei@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Calling a nested spin_lock_irqsave() will overwrite the original "flags" so
that they can not be enabled again at the end.
Link: https://lore.kernel.org/r/YMyjH16k4M1yEmmU@mwanda
Fixes: 3146240f19 ("scsi: elx: libefc: FC Domain state machine interfaces")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The comparison of the u32 variable rc to less than zero always false
because it is unsigned. Fix this by making it an int.
Link: https://lore.kernel.org/r/20210616170401.15831-1-colin.king@canonical.com
Fixes: 202bfdffae ("scsi: elx: libefc: FC node ELS and state handling")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Addresses-Coverity: ("Unsigned compared against 0")
debugfs_create_xxx routines, which return pointers, are being checked for
error by looking for NULL values. The routines may return pointer-munged
-Exxx codes, so they should be using IS_ERR() to adapt.
There are two cases:
- The first case is on initial directory creation, which actually doesn't
need to be checked. So remove the check.
- Creation of the sessions subdirectory. Modify this creation to create
under the initial directory created, and fix failure check.
Link: https://lore.kernel.org/r/20210618233004.83769-1-jsmart2021@gmail.com
Fixes: 4df84e8466 ("scsi: elx: efct: Driver initialization routines")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
efct_hw_iotype_is_originator() is returning a negative (-EIO) status which
doesn't make sense for a u8 function type.
Reviewing the code, the function only needs to return true/false, thus a
bool status is most appropriate.
Change the function return type and patch up the one callee as the bool
inverses the if check.
Link: https://lore.kernel.org/r/20210618231524.83179-1-jsmart2021@gmail.com
Fixes: 4df84e8466 ("scsi: elx: efct: Driver initialization routines")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
cmpxchg is being used on a bool type, which is requiring architecture
support that isn't compatible with a bool.
Convert variable abort_in_progress from bool to int.
Link: https://lore.kernel.org/r/20210618174050.80302-1-jsmart2021@gmail.com
Fixes: ebc076b3ed ("scsi: elx: efct: Tie into kernel Kconfig and build process")
Reported-by: kernel test robot <lkp@intel.com>
Co-developed-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
clang warns:
drivers/scsi/elx/efct/efct_hw.c:1523:17: warning: address of array
'ctx->buf' will always evaluate to 'true' [-Wpointer-bool-conversion]
(!ctx->buf ? U32_MAX : *((u32 *)ctx->buf)));
~~~~~~^~~
buf is an array in the middle of a struct so deferencing it is not a
problem as long as ctx is not NULL. Eliminate the check, which fixes the
warning.
Link: https://github.com/ClangBuiltLinux/linux/issues/1398
Link: https://lore.kernel.org/r/20210617063123.21239-1-nathan@kernel.org
Fixes: 580c0255e4 ("scsi: elx: efct: RQ buffer, memory pool allocation and deallocation APIs")
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
clang warns:
drivers/scsi/elx/efct/efct_lio.c:1216:24: warning: variable 'id' is
uninitialized when used here [-Wuninitialized]
se_sess, node, id);
^~
Shuffle the debug print after id's initialization so that the actual value
is printed.
Link: https://github.com/ClangBuiltLinux/linux/issues/1397
Link: https://lore.kernel.org/r/20210617061721.2405511-1-nathan@kernel.org
Fixes: 692e5d73a8 ("scsi: elx: efct: LIO backend interface routines")
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix to return negative error code -ENOMEM from the error handling case
instead of 0. Also fix typo in error message.
Link: https://lore.kernel.org/r/20210617024837.1023069-1-weiyongjun1@huawei.com
Fixes: 4df84e8466 ("scsi: elx: efct: Driver initialization routines")
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The variable "lun" is being initialized with a value that is never read, it
is being updated later on. The assignment is redundant and can be removed.
Link: https://lore.kernel.org/r/20210616171621.16176-1-colin.king@canonical.com
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Addresses-Coverity: ("Unused value")
Integration with VMID patches resulted in a build error when
CONFIG_DEBUG_FS is disabled and driver option CONFIG_SCSI_LPFC_DEBUG_FS is
disabled.
It results in an undefined variable:
lpfc_scsi:5595:3: error: 'uuid' undeclared (first use in this function); did you mean 'upid'?
Link: https://lore.kernel.org/r/20210618171842.79710-1-jsmart2021@gmail.com
Fixes: 33c79741de ("scsi: lpfc: vmid: Introduce VMID in I/O path")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The continue statement at the end of a for-loop has no effect, remove it.
Link: https://lore.kernel.org/r/20210617073743.151008-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Addresses-Coverity: ("Continue has no effect")
When an expander does not contain any 'phys', an appropriate error code -1
should be returned, as done elsewhere in this function. However, we
currently do not explicitly assign this error code to 'rc'. As a result, 0
was incorrectly returned.
Link: https://lore.kernel.org/r/20210514081300.6650-1-thunder.leizhen@huawei.com
Fixes: f92363d123 ("[SCSI] mpt3sas: add new driver supporting 12GB SAS")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the structurally dead code (UNREACHABLE) type of error reported by
Coverity.
Link: https://lore.kernel.org/r/20210618155506.2609112-1-suganath-prabu.subramani@broadcom.com
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Handle a reported media event code of 3. This indicates that the media has
been removed from the drive and user intervention is required to proceed.
Return DISK_EVENT_EJECT_REQUEST in that case.
Link: https://lore.kernel.org/r/20210611094402.23884-1-limanyi@uniontech.com
Signed-off-by: ManYi Li <limanyi@uniontech.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the following warnings:
drivers/scsi/mpi3mr/mpi3mr_os.c:24:5: warning: symbol 'prot_mask' was not declared. Should it be static?
drivers/scsi/mpi3mr/mpi3mr_os.c:28:5: warning: symbol 'prot_guard_mask' was not declared. Should it be static?
drivers/scsi/mpi3mr/mpi3mr_os.c:31:5: warning: symbol 'logging_level' was not declared. Should it be static?
Link: https://lore.kernel.org/r/20210604071407.1360742-1-yangyingliang@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Acked-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix to return a negative error code from the error handling case instead of
0 as done elsewhere in this function.
Link: https://lore.kernel.org/r/20210603151653.711020-1-yangyingliang@huawei.com
Fixes: fb9b04574f ("scsi: mpi3mr: Add support for recovering controller")
Fixes: 824a156633 ("scsi: mpi3mr: Base driver code")
Reported-by: Hulk Robot <hulkci@huawei.com>
Acked-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Goto unlock path before return from function in the error handling case.
Link: https://lore.kernel.org/r/20210603152803.717505-1-yangyingliang@huawei.com
Fixes: c9566231cf ("scsi: mpi3mr: Create operational request and reply queue pair")
Reported-by: Hulk Robot <hulkci@huawei.com>
Acked-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This final patch ties the efct driver into the kernel Kconfig and build
linkages in the drivers/scsi directory.
Link: https://lore.kernel.org/r/20210601235512.20104-32-jsmart2021@gmail.com
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Co-developed-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Integration with the scsi_fc_transport host interfaces.
Link: https://lore.kernel.org/r/20210601235512.20104-30-jsmart2021@gmail.com
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Co-developed-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Implement routines to detach transport and hardware objects.
Link: https://lore.kernel.org/r/20210601235512.20104-29-jsmart2021@gmail.com
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Co-developed-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Routines that write I/O to work queue, send SRRs and raw frames.
Link: https://lore.kernel.org/r/20210601235512.20104-27-jsmart2021@gmail.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Co-developed-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Routines for SCSI transport IO alloc, build and send I/O.
Link: https://lore.kernel.org/r/20210601235512.20104-25-jsmart2021@gmail.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Co-developed-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add routines to handle unsolicited FC frames.
Link: https://lore.kernel.org/r/20210601235512.20104-24-jsmart2021@gmail.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Co-developed-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add driver definitions for:
- Routines for EQ, CQ, WQ and RQ processing.
- Routines for I/O object pool allocation and deallocation.
Link: https://lore.kernel.org/r/20210601235512.20104-23-jsmart2021@gmail.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Co-developed-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add routines for queue creation, deletion, and configuration.
Link: https://lore.kernel.org/r/20210601235512.20104-20-jsmart2021@gmail.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Co-developed-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Start the population of the efct target mode driver. The driver is
contained in the drivers/scsi/elx/efct subdirectory.
Create the efct directory and start population of the driver by adding
SLI-4 configuration parameters, data structures for configuring SLI-4
queues, converting from OS to SLI-4 IO requests, and handling async events.
Link: https://lore.kernel.org/r/20210601235512.20104-18-jsmart2021@gmail.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Co-developed-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add library interface definitions for:
- FC node PRLI handling and state management.
Link: https://lore.kernel.org/r/20210601235512.20104-15-jsmart2021@gmail.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Co-developed-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add library interface definitions for:
- Fabric node initialization and logins.
- Name/Directory Services node.
- Fabric Controller node to process rscn events.
These are all interactions with remote ports that correspond to well-known
fabric entities
Link: https://lore.kernel.org/r/20210601235512.20104-14-jsmart2021@gmail.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Co-developed-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add library interface definitions for:
- SLI and FC port (aka n_port_id) registration, allocation and
deallocation.
Link: https://lore.kernel.org/r/20210601235512.20104-12-jsmart2021@gmail.com
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Co-developed-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Start the population of the libefc library.
The library will contain common tasks usable by a target or initiator
driver. The library will also contain a FC discovery state machine
interface.
Creates the library directory and add definitions for the discovery state
machine interface.
Link: https://lore.kernel.org/r/20210601235512.20104-9-jsmart2021@gmail.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Co-developed-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add APIs to initialize the library, initialize the SLI Port, reset
firmware, terminate the SLI Port, and terminate the library.
Link: https://lore.kernel.org/r/20210601235512.20104-8-jsmart2021@gmail.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Co-developed-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add routines to create mailbox commands used during adapter initialization
and add APIs to issue mailbox commands to the adapter through the bootstrap
mailbox register.
Link: https://lore.kernel.org/r/20210601235512.20104-7-jsmart2021@gmail.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Co-developed-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add service routines to create different WQEs and add APIs to issue iread,
iwrite, treceive, tsend and other work queue entries.
Link: https://lore.kernel.org/r/20210601235512.20104-6-jsmart2021@gmail.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Co-developed-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add service routines to create mailbox commands and add APIs to
create/destroy/parse SLI-4 EQ, CQ, RQ and MQ queues.
Link: https://lore.kernel.org/r/20210601235512.20104-5-jsmart2021@gmail.com
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Co-developed-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add definitions for SLI-4 mailbox commands and responses.
Link: https://lore.kernel.org/r/20210601235512.20104-4-jsmart2021@gmail.com
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Co-developed-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Continue the libefc_sli SLI-4 library population.
Add SLI-4 Data structures and defines for:
- Buffer Descriptors (BDEs)
- Scatter/Gather List elements (SGEs)
- Queues and their Entry Descriptions for: Event Queues (EQs), Completion
Queues (CQs), Receive Queues (RQs), and the Mailbox Queue (MQ).
Link: https://lore.kernel.org/r/20210601235512.20104-3-jsmart2021@gmail.com
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Co-developed-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This is the initial patch for the new Emulex target mode SCSI driver.
- Create the new Emulex source level directory drivers/scsi/elx and add
the directory to the MAINTAINERS file.
- Create the first library subdirectory drivers/scsi/elx/libefc_sli. This
library is a SLI-4 interface library.
- Start the population of the libefc_sli library with definitions of SLI-4
hardware register offsets and definitions.
Link: https://lore.kernel.org/r/20210601235512.20104-2-jsmart2021@gmail.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Co-developed-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes scripts/checkpatch.pl warning:
WARNING: Possible unnecessary 'out of memory' message
Remove it can help us save a bit of memory.
Also change the return error code from "-1" to "-ENOMEM".
Link: https://lore.kernel.org/r/20210610094605.16672-2-thunder.leizhen@huawei.com
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Using list_move_tail() instead of list_del() + list_add_tail().
Link: https://lore.kernel.org/r/20210609072321.1356896-1-libaokun1@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Mediatek UFS reset function relies on Reset Control provided by
reset-ti-syscon. To make Mediatek Reset Control work properly, select
reset-ti-syscon to ensure it is being built.
In addition, establish device_link to wait until reset-ti-syscon
initialization is complete during UFS probing.
Link: https://lore.kernel.org/r/1622601720-22466-1-git-send-email-peter.wang@mediatek.com
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Using list_move_tail() instead of list_del() + list_add_tail().
Link: https://lore.kernel.org/r/1623113493-49384-1-git-send-email-zou_wei@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Hyper-V is observed to sometimes set multiple flags in the srb_status, such
as ABORTED and ERROR. Current code in storvsc_handle_error() handles only a
single flag being set, and does nothing when multiple flags are set. Fix
this by changing the case statement into a series of "if" statements
testing individual flags. The functionality for handling each flag is
unchanged.
Link: https://lore.kernel.org/r/1622827263-12516-3-git-send-email-mikelley@microsoft.com
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When an I/O error is reported by the underlying Hyper-V host, current code
provides details only when the logging level is set to WARN, making it more
difficult to diagnose problems in live customer situations. Fix this by
reporting details at ERROR level, which is the default. Also add more
information, including the Hyper-V error code, and the tag # so that the
message can be matched with messages at the SCSI and blk-mq levels.
Also, sense information logging is inconsistent and duplicative. The
existence of sense info is first logged at WARN level, and then full sense
info is logged at ERROR level. Fix this by removing the logging of the
existence of sense info, and change the logging of full sense info to WARN
level in favor of letting the generic SCSI layer handle such logging. With
the change to WARN level, it's no longer necessary to filter out as noise
any NOT READY sense info generated by the virtual DVD device.
Link: https://lore.kernel.org/r/1622827263-12516-2-git-send-email-mikelley@microsoft.com
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
As general cleanup and in preparation for subsequent patches:
- Use min() instead of open coding.
- Use set_host_byte() instead of open coding access to scsi_status
field.
- Collapse nested "if" statements to reduce indentation.
- Fix other indentation.
- Remove extra blank lines.
No functional changes.
[mkp: dropped status_byte() which no longer exists]
Link: https://lore.kernel.org/r/1622827263-12516-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmDGe+4eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG/IUH/iyHVulAtAhL9bnR
qL4M1kWfcG1sKS2TzGRZzo6YiUABf89vFP90r4sKxG3AKrb8YkTwmJr8B/sWwcsv
PpKkXXTobbDfpSrsXGEapBkQOE7h2w739XeXyBLRPkoCR4UrEFn68TV2rLjMLBPS
/EIZkonXLWzzWalgKDP4wSJ7GaQxi3LMx3dGAvbFArEGZ1mPHNlgWy2VokFY/yBf
qh1EZ5rugysc78JCpTqfTf3fUPK2idQW5gtHSMbyESrWwJ/3XXL9o1ET3JWURYf1
b0FgVztzddwgULoIGWLxDH5WWts3l54sjBLj0yrLUlnGKA5FjrZb12g9PdhdywuY
/8KfjeE=
=JfJm
-----END PGP SIGNATURE-----
Merge tag 'v5.13-rc6' into driver-core-next
We need the driver core fix in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Four reasonably small fixes to the core for scsi host allocation
failure paths. The root problem is that we're not freeing the memory
allocated by dev_set_name(), which involves a rejig of may of the free
on error paths to do put_device() instead of kfree which, in turn, has
several other knock on ramifications and inspection turned up a few
other lurking bugs.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYMYEVCYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishbP/AP4oyLA5
h7T5v7z29prQWn0P3TApcDVvXjOnqPNUzZlvkAEAifnVHLMehlzrJDeaSR0OUf8u
U+SKrsxkiov5XYvwGGU=
=0Vfx
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Four reasonably small fixes to the core for scsi host allocation
failure paths.
The root problem is that we're not freeing the memory allocated by
dev_set_name(), which involves a rejig of may of the free on error
paths to do put_device() instead of kfree which, in turn, has several
other knock on ramifications and inspection turned up a few other
lurking bugs"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: core: Only put parent device if host state differs from SHOST_CREATED
scsi: core: Put .shost_dev in failure path if host state changes to RUNNING
scsi: core: Fix failure handling of scsi_add_host_with_dma()
scsi: core: Fix error handling of scsi_host_alloc()
Introduce the VMID in the I/O path. Check if the VMID is enabled and if
the I/O belongs to a VM or not.
Link: https://lore.kernel.org/r/20210608043556.274139-14-muneendra.kumar@broadcom.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Gaurav Srivastava <gaurav.srivastava@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Muneendra Kumar <muneendra.kumar@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add a periodic check for issuing of QFPA command and VMID timeout in the
worker thread. The inactivity timeout check is added via the timer
function.
Link: https://lore.kernel.org/r/20210608043556.274139-13-muneendra.kumar@broadcom.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Gaurav Srivastava <gaurav.srivastava@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Muneendra Kumar <muneendra.kumar@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Implement timeout functionality for the VMID. After the set time period of
inactivity, the VMID is deregistered from the switch.
Link: https://lore.kernel.org/r/20210608043556.274139-12-muneendra.kumar@broadcom.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Gaurav Srivastava <gaurav.srivastava@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Muneendra Kumar <muneendra.kumar@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add the VMID in wqe before sending out the request. The type of VMID
depends on the configured type and is checked before being appended.
Link: https://lore.kernel.org/r/20210608043556.274139-11-muneendra.kumar@broadcom.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Gaurav Srivastava <gaurav.srivastava@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Muneendra Kumar <muneendra.kumar@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Implement CT commands for registering and deregistering the appid for the
application. Also, a small change in decrementing the ndlp ref counter has
been added.
Link: https://lore.kernel.org/r/20210608043556.274139-10-muneendra.kumar@broadcom.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Gaurav Srivastava <gaurav.srivastava@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Muneendra Kumar <muneendra.kumar@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Implement routines to save, retrieve, and remove the VMIDs from the data
structure. A hash table is used to save the VMIDs and the corresponding
UUIDs associated with the application/VMs.
Link: https://lore.kernel.org/r/20210608043556.274139-9-muneendra.kumar@broadcom.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Gaurav Srivastava <gaurav.srivastava@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Muneendra Kumar <muneendra.kumar@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Implement ELS commands QFPA and UVEM for the priority tagging appid
support.
Link: https://lore.kernel.org/r/20210608043556.274139-8-muneendra.kumar@broadcom.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Gaurav Srivastava <gaurav.srivastava@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Muneendra Kumar <muneendra.kumar@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add supporting datastructures for mailbox command which helps in
determining if the firmware supports appid. Allocate resources for VMID at
initialization time and clean them up on removal.
Link: https://lore.kernel.org/r/20210608043556.274139-7-muneendra.kumar@broadcom.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Gaurav Srivastava <gaurav.srivastava@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Muneendra Kumar <muneendra.kumar@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Initialize parameters such as type of VMID, max number of VMIDs supported
and timeout value for the VMID registration based on the user input.
Link: https://lore.kernel.org/r/20210608043556.274139-6-muneendra.kumar@broadcom.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Gaurav Srivastava <gaurav.srivastava@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Muneendra Kumar <muneendra.kumar@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add the primary datastructures needed to implement VMID in the lpfc
driver. Maintain the capability, current state, and hash table for the
vmid/appid along with other information. This implementation supports the
two versions of vmid implementation (app header and priority tagging).
Link: https://lore.kernel.org/r/20210608043556.274139-5-muneendra.kumar@broadcom.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Gaurav Srivastava <gaurav.srivastava@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Muneendra Kumar <muneendra.kumar@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add a unique application identifier (i.e fc_app_id member) in blkcg. This
allows identification of traffic belonging to an specific both on the host
and in the fabric infrastructure. As an example, this allows the storage
stack to uniquely identify traffic belong to particular virtual machine.
Link: https://lore.kernel.org/r/20210608043556.274139-3-muneendra.kumar@broadcom.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Muneendra Kumar <muneendra.kumar@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A couple of ibmvscsi files are missing the inclusion of linux/of.h
and linux/irqdomain.h, relying on transitive inclusion from another
file.
As we are about to break this dependency, make sure these dependencies
are explicit.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Add all the attributes for FDMI.
Fall back mechanism is added in between FDMI V2 and FDMI V1 attributes. In
case FDMI get fails for V2 attributes we fall back to V1 attributes.
Link: https://lore.kernel.org/r/20210603121623.10084-5-jhasan@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Javed Hasan <jhasan@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add all attributes for RHBA and RPA registration.
Fallback mechanism is added between RBHA V2 and RHBA V1 attributes. In case
RHBA get fails for V2 attributes we fall back to V1 attribute registration.
Link: https://lore.kernel.org/r/20210603121623.10084-4-jhasan@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Javed Hasan <jhasan@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Initialize RHBA and RPA attributes.
Link: https://lore.kernel.org/r/20210603121623.10084-2-jhasan@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Javed Hasan <jhasan@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Incorrect condition check was leading to data corruption.
Link: https://lore.kernel.org/r/20210603101404.7841-3-jhasan@marvell.com
Fixes: 8fd9efca86 ("scsi: libfc: Work around -Warray-bounds warning")
CC: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Javed Hasan <jhasan@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If an internal task abort timeout occurs, the controller has developed a
fault, and needs to be reset to be recovered.
When this occurs during error handling, the current policy is to allow
error handling to continue, and the inevitable nexus ha reset will handle
the required reset.
However various steps of error handling need to taken before this happens.
These also involve some level of HW interaction, which will also fail with
various timeouts.
Speed up this process by recording a HW fault bit for an internal abort
timeout - when this is set, just automatically error any HW interaction,
and essentially go straight to clear nexus ha (to reset the controller).
Link: https://lore.kernel.org/r/1623058179-80434-6-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If an internal task abort timeout occurs, the controller has developed a
fault, and needs to be reset to be recovered. However if a timeout occurs
during SCSI error handling, issuing a controller reset immediately may
conflict with the error handling.
To handle internal abort in these two scenarios, only queue the reset when
not in an error handling function. In the case of a timeout during error
handling, do nothing and rely on the inevitable ha nexus reset to reset the
controller.
Link: https://lore.kernel.org/r/1623058179-80434-5-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For a clear nexus reset operation, the I_T nexus resets are executed
serially for each device. For devices attached through an expander, this
may take 2s per device; so, in total, could take a long time.
Reduce the total time by running the I_T nexus resets in parallel through
async operations.
Link: https://lore.kernel.org/r/1623058179-80434-3-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If an OOB event is received but the phy still fails to come up, a link
reset will be issued repeatedly at an interval of 20s until the phy comes
up.
Set a limit for link reset issue retries to avoid printing the timeout
message endlessly.
Link: https://lore.kernel.org/r/1623058179-80434-2-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
qedi_clear_session_ctx() could race with the in-kernel or userspace driven
recovery/removal and we could access a NULL conn or do a double free.
We should be using iscsi_host_remove() to start the removal process from
the driver. It will start the in-kernel recovery and notify userspace that
the driver's scsi_hosts are being removed. iscsid will then drive the
session removal like is done when the logout command is run. When the
sessions are removed, iscsi_host_remove() will return so qedi can finish
knowing there are no running sessions and no new sessions will be allowed.
This also fixes an issue where we check for a NULL conn after already
accessing it introduced in commit 27e986289e ("scsi: iscsi: Drop suspend
calls from ep_disconnect") by just removing the function completely.
Link: https://lore.kernel.org/r/20210609192709.5094-1-michael.christie@oracle.com
Fixes: 27e986289e ("scsi: iscsi: Drop suspend calls from ep_disconnect")
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The pci_alloc_irq_vectors_affinity() function returns negative error codes
or it returns a number between the minimum vectors (1 in this case) and
max_vectors. It won't return zero. Because "i" is a u16 then the error
handling won't work. And also if it did work the error code was not set.
Really "max_vectors" can be an int as well because we're doing a min_t() on
int type. The other change is that it's better to remove unnecessary
initialization so that static checkers can warn us if there are ever
uninitialized variable bugs introduced in the future.
I changed the error code from -1 (-EPERM) if the kmalloc() failed to
-ENOMEM. And on success path I changed it from "return retval;" to "return
0;" which shouldn't affect the compiled code but makes it more readable.
Link: https://lore.kernel.org/r/YMCJcnmSI4kOIyv/@mwanda
Fixes: 824a156633 ("scsi: mpi3mr: Base driver code")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Christophe JAILLET
YueHaibing
SeongJae Park
Christoph Hellwig
Quinn Tran
Hannes Reinecke
Yufen Yu
Bart Van Assche
Colin Ian King
James Smart
Kees Cook
Zou Wei
Dan Carpenter
James Smart
Nathan Chancellor
Wei Yongjun
Andy Shevchenko
Zhen Lei
Suganath Prabu S
ManYi Li
Yang Yingliang
Baokun Li
Peter Wang
Shaokun Zhang
Michael Kelley
Greg Kroah-Hartman
Linus Torvalds
Gaurav Srivastava
Muneendra Kumar
Marc Zyngier
Javed Hasan
Luo Jiaxing
Mike Christie