Граф коммитов

255 Коммитов

Автор SHA1 Сообщение Дата
Hans-Christian Egtvedt eb1f293060 Driver for the Atmel on-chip SSC on AT32AP and AT91
The Synchronous Serial Controller (SSC) on Atmel microprocessors are
capable of tranceiving many frame based protocols, like I2S.  Tested on the
AT32AP7000/ATSTK1000.

This driver is used in the ALSA sound driver for the AT73C213 external DAC
on the ATSTK1000 development board for AVR32.  This sound driver will be
submitted soon.

Hardware documentation can be found in the AT32AP7000 data sheet, which can
be downloaded from
http://www.atmel.com/dyn/products/datasheets.asp?family_id=682

[akpm@linux-foundation.org: init spinlock at compile time]
Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: David Brownell <david-b@pacbell.net>
Cc: Andrew Victor <andrew@sanpeople.com>
Cc: Patrice Vilchez <patrice.vilchez@rfo.atmel.com>
Cc: Nicolas Ferre <nicolas.ferre@rfo.atmel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:47 -07:00
Jeremy Katz fba956c46a Map volume and brightness events on thinkpads
There are standard keycodes for brightness and volume; map the events to
emit them so that things work properly

Signed-off-by: Jeremy Katz <katzj@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-15 13:54:40 -07:00
Linus Torvalds 4fa435018d Merge branch 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6
* 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6: (53 commits)
  hwmon: (vt8231) fix sparse warning
  hwmon: (sis5595) fix sparse warning
  hwmon: (w83627hf) don't assume bank 0
  hwmon: (w83627hf) Fix setting fan min right after driver load
  hwmon: (w83627hf) De-macro sysfs callback functions
  hwmon: Add new combined driver for FSC chips
  hwmon: (ibmpex) Release IPMI user if hwmon registration fails
  hwmon: (dme1737) Add sch311x support
  hwmon: (dme1737) group functions logically
  hwmon: (dme1737) cleanups
  hwmon: IBM power meter driver
  hwmon: (coretemp) Add support for Celeron 4xx
  hwmon: (lm87) Disable VID when it should be
  hwmon: (w83781d) Add individual alarm and beep files
  hwmon: VRM is not read from registers
  MAINTAINERS: update hwmon subsystem git trees
  hwmon: Fix the code examples in documentation
  hwmon: update sysfs interface document - error handling
  hwmon: (thmc50) Fix a debug message
  hwmon: (thmc50) Don't create temp3 if not enabled
  ...
2007-10-14 12:50:19 -07:00
Kay Sievers 7eff2e7a8b Driver core: change add_uevent_var to use a struct
This changes the uevent buffer functions to use a struct instead of a
long list of parameters. It does no longer require the caller to do the
proper buffer termination and size accounting, which is currently wrong
in some places. It fixes a known bug where parts of the uevent
environment are overwritten because of wrong index calculations.

Many thanks to Mathieu Desnoyers for finding bugs and improving the
error handling.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 14:51:01 -07:00
Linus Torvalds e86908614f Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (408 commits)
  [POWERPC] Add memchr() to the bootwrapper
  [POWERPC] Implement logging of unhandled signals
  [POWERPC] Add legacy serial support for OPB with flattened device tree
  [POWERPC] Use 1TB segments
  [POWERPC] XilinxFB: Allow fixed framebuffer base address
  [POWERPC] XilinxFB: Add support for custom screen resolution
  [POWERPC] XilinxFB: Use pdata to pass around framebuffer parameters
  [POWERPC] PCI: Add 64-bit physical address support to setup_indirect_pci
  [POWERPC] 4xx: Kilauea defconfig file
  [POWERPC] 4xx: Kilauea DTS
  [POWERPC] 4xx: Add AMCC Kilauea eval board support to platforms/40x
  [POWERPC] 4xx: Add AMCC 405EX support to cputable.c
  [POWERPC] Adjust TASK_SIZE on ppc32 systems to 3GB that are capable
  [POWERPC] Use PAGE_OFFSET to tell if an address is user/kernel in SW TLB handlers
  [POWERPC] 85xx: Enable FP emulation in MPC8560 ADS defconfig
  [POWERPC] 85xx: Killed <asm/mpc85xx.h>
  [POWERPC] 85xx: Add cpm nodes for 8541/8555 CDS
  [POWERPC] 85xx: Convert mpc8560ads to the new CPM binding.
  [POWERPC] mpc8272ads: Remove muram from the CPM reg property.
  [POWERPC] Make clockevents work on PPC601 processors
  ...

Fixed up conflict in Documentation/powerpc/booting-without-of.txt manually.
2007-10-11 21:55:47 -07:00
Tony Jones 1beeffe433 hwmon: Convert from class_device to device
Convert from class_device to device for hwmon_device_register/unregister

Signed-off-by: Tony Jones <tonyj@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-10-09 22:56:30 -04:00
Jeff Garzik 1855256c49 drivers/firmware: const-ify DMI API and internals
Three main sets of changes:

1) dmi_get_system_info() return value should have been marked const,
   since callers should not be changing that data.

2) const-ify DMI internals, since DMI firmware tables should,
   whenever possible, be marked const to ensure we never ever write to
   that data area.

3) const-ify DMI API, to enable marking tables const where possible
   in low-level drivers.

And if we're really lucky, this might enable some additional
optimizations on the part of the compiler.

The bulk of the changes are #2 and #3, which are interrelated.  #1 could
have been a separate patch, but it was so small compared to the others,
it was easier to roll it into this changeset.

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-09 20:22:20 -04:00
Cyrill Gorcunov 3049ea7e04 [POWERPC] Sky Cpu and Nexus: use seq_file/single_open on proc interface
This patch changes proc interface to be used with single_file/seq_open
calls.

Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-03 12:02:44 +10:00
Cyrill Gorcunov 8b70da1a09 [POWERPC] Sky Cpu: use C99 style for struct init
This changes structure item init format to C99, and removes useless
structure items init.

Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Kumar Gala <galak@gate.crashing.org>
Cc: Brian Waite <waite@skycomputers.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-03 12:02:44 +10:00
Cyrill Gorcunov 5f725fe92c [POWERPC] Sky Cpu and Nexus: check for create_proc_entry ret code
Adds checking of create_proc_entry call to prevent possible NULL
pointer usage.

Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Kumar Gala <galak@gate.crashing.org>
Cc: Brian Waite <waite@skycomputers.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-03 12:02:44 +10:00
Cyrill Gorcunov 7472fd36a8 [POWERPC] Sky Cpu and Nexus: check for platform_get_resource retcode
Add adds checking for platform_get_resource() return code to prevent
possible NULL pointer usage.

Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Kumar Gala <galak@gate.crashing.org>
Cc: Brian Waite <waite@skycomputers.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-03 12:02:44 +10:00
Cyrill Gorcunov d2ceb47a7c [POWERPC] Sky Cpu and Nexus: include io.h
Add #include <asm/io.h> directive to properly declare ioremap() and
writel().

Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Kumar Gala <galak@gate.crashing.org>
Cc: Brian Waite <waite@skycomputers.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-03 12:02:43 +10:00
Cyrill Gorcunov a4e32b5f0a [POWERPC] Sky Cpu and Nexus: code style improvement
Remove useless spaces and adds some empty lines to make code more
readable.  Also marker for printk is added.

Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Kumar Gala <galak@gate.crashing.org>
Cc: Brian Waite <waite@skycomputers.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-03 12:02:43 +10:00
Len Brown ecfe7f0937 Pull thinkpad into release branch 2007-09-17 00:58:40 -04:00
Henrique de Moraes Holschuh 3b0c6485a7 ACPI: thinkpad-acpi: bump up version to 0.16
Name it thinkpad-acpi version 0.16 to avoid any confusion with some 0.15
thinkpad-acpi development snapshots and backports that had input layer
support, but no hotkey_report_mode support.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-09-17 00:58:31 -04:00
Henrique de Moraes Holschuh ff80f1370f ACPI: thinkpad-acpi: revert new 2.6.23 CONFIG_THINKPAD_ACPI_INPUT_ENABLED option
Revert new 2.6.23 CONFIG_THINKPAD_ACPI_INPUT_ENABLED Kconfig option because
it would create a legacy we don't want to support.

CONFIG_THINKPAD_ACPI_INPUT_ENABLED was added to try to fix an issue that is
now moot with the addition of the netlink ACPI event report interface to
the ACPI core.

Now that ACPI core can send events over netlink, we can use a different
strategy to keep backwards compatibility with older userspace, without the
need for the CONFIG_THINKPAD_ACPI_INPUT_ENABLED games.  And it arrived
before CONFIG_THINKPAD_ACPI_INPUT_ENABLED made it to a stable mainline
kernel, even, which is Good.

This patch is in sync with some changes to thinkpad-acpi backports, that
will keep things sane for userspace across different combinations of kernel
versions, thinkpad-acpi backports (or the lack thereof), and userspace
capabilities:

Unless a module parameter is used, thinkpad-acpi will now behave in such a
way that it will work well (by default) with userspace that still uses only
the old ACPI procfs event interface and doesn't care for thinkpad-acpi
input devices.

It will also always work well with userspace that has been updated to use
both the thinkpad-acpi input devices, and ACPI core netlink event
interface, regardless of any module parameter.

The module parameter was added to allow thinkpad-acpi to work with
userspace that has been partially updated to use thinkpad-acpi input
devices, but not the new ACPI core netlink event interface.  To use this
mode of hot key reporting, one has to specify the hotkey_report_mode=2
module parameter.

The thinkpad-acpi driver exports the value of hotkey_report_mode through
sysfs, as well.  thinkpad-acpi backports to older kernels, that do not
support the new ACPI core netlink interface, have code to allow userspace
to switch hotkey_report_mode at runtime through sysfs.  This capability
will not be provided in mainline thinkpad-acpi as it is not needed there.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Michael S. Tsirkin <mst@dev.mellanox.co.il>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Richard Hughes <hughsient@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-09-17 00:58:19 -04:00
Jonathan Woithe cb90ab5b42 msi-laptop: replace ',' with ';'
Signed-off-by: Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-29 03:18:12 -04:00
Len Brown 25c87f7f2a Pull events into release branch
Conflicts:

	drivers/acpi/video.c

Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-25 01:44:01 -04:00
Len Brown b7011d5386 Pull sony into release branch 2007-08-24 22:20:31 -04:00
Guillaume Chazarain e1996a69e1 asus-laptop: Fix rmmod of asus_laptop
The asus laptop driver conditionnaly registers leds in asus_led_register()
depending on their availability, but unconditionnaly unregisters them all at
exit time or when the module fails to load. Unregistering not registered leds
result in the following Oops. So we should check before unregistering.

 [<c032d2f9>] do_page_fault+0x511/0x5e9
 [<c032bae2>] error_code+0x6a/0x70
 [<c026abf8>] device_unregister+0x26/0x32
 [<f8864218>] led_classdev_unregister+0x58/0x94 [led_class]
 [<f88a90f8>] asus_led_exit+0x17/0x41 [asus_laptop]
 [<f88a91c9>] asus_laptop_exit+0xd/0x3f [asus_laptop]
 [<c013cee1>] sys_delete_module+0x17b/0x1a2
 [<c0106eae>] sysenter_past_esp+0x6b/0xa1

EIP: [<c026a9a3>] device_del+0xb/0x23a SS:ESP 0068:f594ef0c

Signed-off-by: Guillaume Chazarain <guichaz@yahoo.fr>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-24 01:07:30 -04:00
Mattia Dongili 015a916fbb sony-laptop: call sonypi_compat_init earlier
sonypi_compat uses a kfifo that needs to be present before _SRS is
called to be able to cope with the IRQs triggered when setting
resources.

Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-24 00:57:20 -04:00
Mattia Dongili f46d1604ed sony-laptop: enable Vaio FZ events
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-24 00:56:59 -04:00
Len Brown 14e04fb34f ACPI: Schedule /proc/acpi/event for removal
Schedule /proc/acpi/event for removal in 6 months.

Re-name acpi_bus_generate_event() to acpi_bus_generate_proc_event()
to make sure there is no confusion that it is for /proc/acpi/event only.

Add CONFIG_ACPI_PROC_EVENT to allow removal of /proc/acpi/event.
There is no functional change if CONFIG_ACPI_PROC_EVENT=y

Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-23 15:20:26 -04:00
Zhang Rui 962ce8ca06 ACPI: don't duplicate input events on netlink
The previous events patch added a netlink event for every
user of the legacy /proc/acpi/event interface.

However, some users of /proc/acpi/event are really input events,
and they already report their events via the input layer.

Introduce a new interface, acpi_bus_generate_netlink_event(),
which is explicitly called by devices that want to repoprt
events via netlink.  This allows the input-like events
to opt-out of generating netlink events.  In summary:

events that are sent via netlink:
	ac/battery/sbs
	thermal
	processor
	thinkpad_acpi dock/bay

events that are sent via input layer:
	button
	video hotkey
	thinkpad_acpi hotkey
	asus_acpi/asus-laptop hotkey
	sonypi/sonylaptop

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-23 14:27:23 -04:00
Jan Engelhardt 06bfb7eb15 Add some help texts to recently-introduced kconfig items
Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (edited MACINTOSH_DRIVERS per Geert Uytterhoeven's remark)
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-18 09:52:50 -07:00
Len Brown 3b6919e536 pull asus sony thinkpad into release branch 2007-08-12 00:17:12 -04:00
Henrique de Moraes Holschuh 5f70bf7510 ACPI: thinkpad-acpi: change thinkpad-acpi input default and kconfig help
The current kconfig help text was misleading users.  Also, the default for
an input-layer-optimized support caused way too many problems without
up-to-date userspace in place.

So, rework the help text, and change the default to N.  Note that
distributions are supposed to enable this option as soon as they update HAL
to a version that handles the thinkpad-acpi new input layer interface.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Michael S. Tsirkin <mst@dev.mellanox.co.il>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-07 15:10:07 -04:00
Henrique de Moraes Holschuh ac36393de6 ACPI: thinkpad-acpi: fix the module init failure path
Thomas Renninger reports that if one tries to load thinkpad-acpi in a
non-thinkpad, one gets:

Call Trace:
 [<ffffffff802fa57d>] kref_get+0x2f/0x36
 [<ffffffff802f97f7>] kobject_get+0x12/0x17
 [<ffffffff8036dfd7>] get_driver+0x14/0x1a
 [<ffffffff8036dfee>] driver_remove_file+0x11/0x32
 [<ffffffff8823b9be>] :thinkpad_acpi:thinkpad_acpi_module_exit+0xa8/0xfc
 [<ffffffff8824b8a0>] :thinkpad_acpi:thinkpad_acpi_module_init+0x74a/0x776
 [<ffffffff8024f968>] __link_module+0x0/0x25
 [<ffffffff80252269>] sys_init_module+0x162c/0x178f
 [<ffffffff8020bc2e>] system_call+0x7e/0x83

So, track if the platform driver and its driver attributes were registered,
and only deallocate them in that case.

This patch is based on Thomas Renninger's patch for the issue.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Acked-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-03 15:32:58 -04:00
Adrian Bunk 11604ecf6f sony-laptop: sony_nc_ids[] can become static.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-03 15:25:44 -04:00
Mattia Dongili e84a02ba0b sony-laptop: restore the last user requested brightness level on resume.
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-03 15:25:00 -04:00
Len Brown 323ef30af3 Pull auto-load-modules into release branch 2007-07-25 01:36:53 -04:00
Thomas Renninger 1ba90e3a87 ACPI: autoload modules - Create __mod_acpi_device_table symbol for all ACPI drivers
modpost is going to use these to create e.g. acpi:ACPI0001
in modules.alias.

Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-07-23 13:56:42 -04:00
Al Viro 3b0d71170d ACPI: asus-laptop: Fix failure exits
> Subject         : drivers/misc/asus-laptop.c:*: error: 'struct led_classdev' has no member named 'class_dev'
> References      : http://lkml.org/lkml/2007/7/22/299
> Submitter       : Gabriel C <nix.or.die@googlemail.com>

Fallout from f8a7c6fe14.  However, looking
at it shows that checks done in ASUS_LED_UNREGISTER() can't trigger
at all (we never get to asus_led_exit() if registration fails) and
if that registration fails, we actually leak stuff.  IOW, it's worse
than just replacing class_dev with dev in there - the tests themselves
had been papering over the lousy cleanup logics.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-07-23 13:35:23 -04:00
Len Brown 08e31686d6 Pull thinkpad into release branch 2007-07-22 02:28:06 -04:00
Mattia Dongili 22a1778058 sony-laptop: Fix event reading in sony-laptop
The rewritten event reading code from sonypi was absolutely wrong,
this patche makes things functional for type2 and type1 models.

Cc: Andrei Paskevich <andrei@capet.iut-fbleau.fr>
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-07-22 00:34:58 -04:00
Mattia Dongili 89892d153d sony-laptop: Add Vaio FE to the special init sequence
The Vaio FE series uses the same sequence as Vaio C series

Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-07-22 00:34:58 -04:00
Mattia Dongili bc57f865fa sony-laptop: Make the driver use MSC_SCAN and a setkeycode and getkeycode key table.
The following is the only way I could think of to hide some events as
per Dmitry suggestions while still using the default {set,get}keycode
implementation.

Make the driver use MSC_SCAN and a setkeycode and getkeycode key table.

Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Richard Hughes <richard@hughsie.com>
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-07-22 00:34:58 -04:00
Mattia Dongili b25b732a16 sony-laptop: Invoke _INI for SNC devices that provide it
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-07-22 00:34:58 -04:00
Mattia Dongili 6315fd1c9c sony-laptop: Add support for recent Vaios Fn keys (C series for now)
Recent Vaios (C, AR, N, FE) need some special initialization
sequence to enable Fn keys interrupts through the Embedded
Controller. Moreover Fn keys have to be decoded internally
using ACPI methods to get the key code.
Thus a new DMI table to add SNC init time callbacks and new
mappings for model-specific key code to generic sony-laptop
code have been added.

Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-07-22 00:34:58 -04:00
Mattia Dongili 8538c3686c sony-laptop: map wireless switch events to KEY_WLAN
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-07-22 00:34:58 -04:00
Mattia Dongili 044847e02d sony-laptop: add new SNC handlers
- lid state: GLID
- indicator lamp: GILS/SILS
- multimedia bass gain: GMGB/CMGB

Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-07-22 00:34:58 -04:00
Henrique de Moraes Holschuh f432255e93 ACPI: thinkpad-acpi: add locking to brightness subdriver
The backlight class does all the locking needed for sysfs access, but
offers no API to interface to that locking without an layer violation.

Since we need to mutex-lock procfs access, implement in-driver locking for
brightness.  It will go away the day thinkpad-acpi procfs goes away, or the
backlight class gives us a way to use its locks without a layer violation.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-07-21 23:50:51 -04:00
Henrique de Moraes Holschuh c78d5c96bb ACPI: thinkpad-acpi: bump up version to 0.15
Name it thinkpad-acpi version 0.15.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-07-21 23:50:13 -04:00
Henrique de Moraes Holschuh 3d6f99ca00 ACPI: thinkpad-acpi: make EC-based thermal readings non-experimental
Reading the 16 thermal sensors directly from the EC has been stable for
about one year, in all supported ThinkPad models.  Remove its
"experimental" label.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-07-21 23:50:05 -04:00
Henrique de Moraes Holschuh a8fba3da3d ACPI: thinkpad-acpi: make sure DSDT TMPx readings don't return +128
We get +128 instead of -128 from the DSDT TMPx methods, due to errors when
converting a EC byte return that is a s8 to an ACPI handler return that is
an int.

Fix it once and for all, by clamping acceptable temperature readings from
DSDT TMPx so that anything outside the [-127,+127] range is converted to
TP_EC_THERMAL_TMP_NA (-128).

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Michael Olbrich <michael.olbrich@gmx.net>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-07-21 23:49:55 -04:00
Henrique de Moraes Holschuh edf0e0e569 ACPI: thinkpad-acpi: react to Lenovo ThinkPad differences in hot key
Lenovo ThinkPads have a slightly different key map layout from IBM
ThinkPads (fn+f2 and fn+f3 are swapped).  Knowing which one we are dealing
with, we can properly set a few more hot keys up by default.

Also, export the correct vendor in the input device, as that information
might be useful to userspace.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-07-21 23:49:18 -04:00
Henrique de Moraes Holschuh 24d3b77467 ACPI: thinkpad-acpi: allow use of CMOS NVRAM for brightness control
It appears that Lenovo decided to break the EC brightness control interface
in a weird way in their latest BIOSes.  Fortunately, the old CMOS NVRAM
interface works just fine in such BIOSes.

Add a module parameter that allows the user to select which strategy to use
for brightness control: EC, NVRAM, or both.  By default, do both (which is
the way thinkpad-acpi used to work until now) on IBM ThinkPads, and use
NVRAM only on Lenovo ThinkPads.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-07-21 23:49:03 -04:00
Henrique de Moraes Holschuh d5a2f2f1d6 ACPI: thinkpad-acpi: store ThinkPad model information
Keep note of ThinkPad model, BIOS and EC firmware information, and log it
on startup.  Makes for far more readable code in places, too.

This patch also adds Lenovo's PCI ID to the pci ids table.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-07-21 23:48:42 -04:00
Henrique de Moraes Holschuh 86cc9445e8 ACPI: thinkpad_acpi: use bool for boolean parameters
Some of the module parameters are boolean in nature.  Make it so in fact.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-07-21 23:48:02 -04:00
Henrique de Moraes Holschuh 996fba08db ACPI: thinkpad-acpi: rename pci HID constant
Rename an internal driver constant, on request by Len Brown.  Also,
document exactly what it is for.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-07-21 23:47:46 -04:00