Граф коммитов

10 Коммитов

Автор SHA1 Сообщение Дата
David S. Miller 09d3f3f0e0 sparc: Kill PROM console driver.
Many years ago when this driver was written, it had a use, but these
days it's nothing but trouble and distributions should not enable it
in any situation.

Pretty much every console device a sparc machine could see has a
bonafide real driver, making the PROM console hack unnecessary.

If any new device shows up, we should write a driver instead of
depending upon this crutch to save us.  We've been able to take care
of this even when no chip documentation exists (sunxvr500, sunxvr2500)
so there are no excuses.

Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-15 17:04:38 -07:00
David Gibson 9fffb55f66 Move dtc and libfdt sources from arch/powerpc/boot to scripts/dtc
The powerpc kernel always requires an Open Firmware like device tree
to supply device information.  On systems without OF, this comes from
a flattened device tree blob.  This blob is usually generated by dtc,
a tool which compiles a text description of the device tree into the
flattened format used by the kernel.  Sometimes, the bootwrapper makes
small changes to the pre-compiled device tree blob (e.g. filling in
the size of RAM).  To do this it uses the libfdt library.

Because these are only used on powerpc, the code for both these tools
is included under arch/powerpc/boot (these were imported and are
periodically updated from the upstream dtc tree).

However, the microblaze architecture, currently being prepared for
merging to mainline also uses dtc to produce device tree blobs.  A few
other archs have also mentioned some interest in using dtc.
Therefore, this patch moves dtc and libfdt from arch/powerpc into
scripts, where it can be used by any architecture.

The vast bulk of this patch is a literal move, the rest is adjusting
the various Makefiles to use dtc and libfdt correctly from their new
locations.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-02 16:52:26 -07:00
David Woodhouse 556b0f58bb Revert "fix modules_install via NFS"
This reverts commit 8b249b6856.

This 'fix' is not necessary; we just need to undo the damage caused
accidentally by Igor/Mauro in 4b29631db3
("V4L/DVB (9533): cx88: Add support for TurboSight TBS8910 DVB-S PCI card")

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-04-06 14:27:17 -07:00
Sam Ravnborg 8b249b6856 fix modules_install via NFS
Rafael reported:

I get the following error from 'make modules_install' on my test boxes:

  HOSTCC  firmware/ihex2fw
/home/rafael/src/linux-2.6/firmware/ihex2fw.c:268: fatal error: opening dependency file firmware/.ihex2fw.d: Read-only file system
compilation terminated.
make[3]: *** [firmware/ihex2fw] Error 1
make[2]: *** [_modinst_post] Error 2
make[1]: *** [sub-make] Error 2
make: *** [all] Error 2

where the configuration is that the kernel is compiled on a build box
with 'make O=<destdir> -j5' and then <destdir> is mounted over NFS read-only by
each test box (full path to this directory is the same on the build box and on
the test boxes).  Then, I cd into <destdir>, run 'make modules_install' and get
the error above.

The issue turns out to be that we when we install firmware pick
up the list of firmware blobs from firmware/Makefile.
And this triggers the Makefile rules to update ihex2fw.

There were two solutions for this issue:
1) Move the list of firmware blobs to a separate file
2) Avoid ihex2fw rebuild by moving it to scripts

As I seriously beleive that the list of firmware blobs should be
done in a fundamental different way solution 2) was selected.

Reported-and-tested-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: David Woodhouse <dwmw2@infradead.org>
2009-01-07 21:44:20 +01:00
Serge E. Hallyn 93c06cbbf9 selinux: add support for installing a dummy policy (v2)
In August 2006 I posted a patch generating a minimal SELinux policy.  This
week, David P. Quigley posted an updated version of that as a patch against
the kernel.  It also had nice logic for auto-installing the policy.

Following is David's original patch intro (preserved especially
bc it has stats on the generated policies):

se interested in the changes there were only two significant
changes. The first is that the iteration through the list of classes
used NULL as a sentinel value. The problem with this is that the
class_to_string array actually has NULL entries in its table as place
holders for the user space object classes.

The second change was that it would seem at some point the initial sids
table was NULL terminated. This is no longer the case so that iteration
has to be done on array length instead of looking for NULL.

Some statistics on the policy that it generates:

The policy consists of 523 lines which contain no blank lines. Of those
523 lines 453 of them are class, permission, and initial sid
definitions. These lines are usually little to no concern to the policy
developer since they will not be adding object classes or permissions.
Of the remaining 70 lines there is one type, one role, and one user
statement. The remaining lines are broken into three portions. The first
group are TE allow rules which make up 29 of the remaining lines, the
second is assignment of labels to the initial sids which consist of 27
lines, and file system labeling statements which are the remaining 11.

In addition to the policy.conf generated there is a single file_contexts
file containing two lines which labels the entire system with base_t.

This policy generates a policy.23 binary that is 7920 bytes.

(then a few versions later...):

The new policy is 587 lines (stripped of blank lines) with 476 of those
lines being the boilerplate that I mentioned last time. The remaining
111 lines have the 3 lines for type, user, and role, 70 lines for the
allow rules (one for each object class including user space object
classes), 27 lines to assign types to the initial sids, and 11 lines for
file system labeling. The policy binary is 9194 bytes.

Changelog:

	Aug 26: Added Documentation/SELinux.txt
	Aug 26: Incorporated a set of comments by Stephen Smalley:
		1. auto-setup SELINUXTYPE=dummy
		2. don't auto-install if selinux is enabled with
			non-dummy policy
		3. don't re-compute policy version
		4. /sbin/setfiles not /usr/sbin/setfiles
	Aug 22: As per JMorris comments, made sure make distclean
		cleans up the mdp directory.
		Removed a check for file_contexts which is now
		created in the same file as the check, making it
		superfluous.

Signed-off-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: David Quigley <dpquigl@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
2008-08-27 08:54:08 +10:00
Ross Biro f2443ab6c4 [PATCH] allow /proc/config.gz to be built as a module
The driver for /proc/config.gz consumes rather a lot of memory and it is in
fact possible to build it as a module.

In some ways this is a bit risky, because the .config which is used for
compiling kernel/configs.c isn't necessarily the same as the .config which was
used to build vmlinux.

But OTOH the potential memory savings are decent, and it'd be fairly dumb to
build your configs.o with a different .config.

Signed-off-by: Andrew Morton <akpm@google.com>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-01 00:39:20 -07:00
Sam Ravnborg 12715d20af kbuild: modpost on vmlinux regardless of CONFIG_MODULES
Based on patch from: Magnus Damm <magnus@valinux.co.jp>
This has the advantage that all section mismatch checks are run regardless
of modules being enabled or not.

When running modpost on vmlinux output:
MODPOST vmlinux

When running modpost on modules output count of modules like this:
MODPOST 5 modules

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-09-25 09:01:49 +02:00
Sam Ravnborg 07aea3a71f kbuild: use in-kernel unifdef
Let headers_install use in-kernel unifdef

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-09-25 09:00:01 +02:00
Sam Ravnborg 6f6046cff2 kconfig: move lxdialog to scripts/kconfig/lxdialog
The only lxdialog user i kconfig - for menuconfig.
So move it to reflect this.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2005-12-16 21:35:19 +01:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00