Including:
- ARM-SMMU support for the TLB range invalidation command in
SMMUv3.2.
- ARM-SMMU introduction of command batching helpers to batch up
CD and ATC invalidation.
- ARM-SMMU support for PCI PASID, along with necessary PCI
symbol exports.
- Introduce a generic (actually rename an existing) IOMMU
related pointer in struct device and reduce the IOMMU related
pointers.
- Some fixes for the OMAP IOMMU driver to make it build on 64bit
architectures.
- Various smaller fixes and improvements.
-----BEGIN PGP SIGNATURE-----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=nhuS
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- ARM-SMMU support for the TLB range invalidation command in SMMUv3.2
- ARM-SMMU introduction of command batching helpers to batch up CD and
ATC invalidation
- ARM-SMMU support for PCI PASID, along with necessary PCI symbol
exports
- Introduce a generic (actually rename an existing) IOMMU related
pointer in struct device and reduce the IOMMU related pointers
- Some fixes for the OMAP IOMMU driver to make it build on 64bit
architectures
- Various smaller fixes and improvements
* tag 'iommu-updates-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (39 commits)
iommu: Move fwspec->iommu_priv to struct dev_iommu
iommu/virtio: Use accessor functions for iommu private data
iommu/qcom: Use accessor functions for iommu private data
iommu/mediatek: Use accessor functions for iommu private data
iommu/renesas: Use accessor functions for iommu private data
iommu/arm-smmu: Use accessor functions for iommu private data
iommu/arm-smmu: Refactor master_cfg/fwspec usage
iommu/arm-smmu-v3: Use accessor functions for iommu private data
iommu: Introduce accessors for iommu private data
iommu/arm-smmu: Fix uninitilized variable warning
iommu: Move iommu_fwspec to struct dev_iommu
iommu: Rename struct iommu_param to dev_iommu
iommu/tegra-gart: Remove direct access of dev->iommu_fwspec
drm/msm/mdp5: Remove direct access of dev->iommu_fwspec
ACPI/IORT: Remove direct access of dev->iommu_fwspec
iommu: Define dev_iommu_fwspec_get() for !CONFIG_IOMMU_API
iommu/virtio: Reject IOMMU page granule larger than PAGE_SIZE
iommu/virtio: Fix freeing of incomplete domains
iommu/virtio: Fix sparse warning
iommu/vt-d: Add build dependency on IOASID
...
Some bug fixes.
The new vdpa subsystem with two first drivers.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAl6MS7wPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpGp8H/2H49Gya1cfVbGU13qgmBSQqQXC8hS3iNLuG
ltRgU+jafJT//kvkdm3/DUzfK3eRUWUfqZLKEbAQDtMY0OGHi/KGEBYVLDde7Zxt
Lg4VnwBhkYDR/f01ZZDbHxzj9JAr83i28nILjLIqf3a1BX4zf203+ZE0/JM8a7wL
dOPoH7NAfyz5ul2F67bR1IOF8vC6TidpavzR2+HC/MocHYXb6Bgfvt+i4EcrfuMf
9lnBfajgklKr9sNJniwvvR1pWVg+YyG3VeC6T8tIC/xzbCmIoNT+5b3q2XPSIHq1
EuQTeXH9CBFXS0qcFlq2ktR1xd1Lx95hKwZpqLwLFDmfgjhV2QU=
=/84P
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
- Some bug fixes
- The new vdpa subsystem with two first drivers
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio-balloon: Revert "virtio-balloon: Switch back to OOM handler for VIRTIO_BALLOON_F_DEFLATE_ON_OOM"
vdpa: move to drivers/vdpa
virtio: Intel IFC VF driver for VDPA
vdpasim: vDPA device simulator
vhost: introduce vDPA-based backend
virtio: introduce a vDPA based transport
vDPA: introduce vDPA bus
vringh: IOTLB support
vhost: factor out IOTLB
vhost: allow per device message handler
vhost: refine vhost and vringh kconfig
virtio-balloon: Switch back to OOM handler for VIRTIO_BALLOON_F_DEFLATE_ON_OOM
virtio-net: Introduce hash report feature
virtio-net: Introduce RSS receive steering feature
virtio-net: Introduce extended RSC feature
tools/virtio: option to build an out of tree module
Pull input updates from Dmitry Torokhov:
"An update to the Goodix touchscreen driver to enable it work properly
on various Bay Trail and Cherry Trail devices, and a few other
assorted changes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (26 commits)
Input: update SPDX tag for input-event-codes.h
Input: i8042 - add Acer Aspire 5738z to nomux list
Input: goodix - fix compilation when ACPI support is disabled
dt-bindings: touchscreen: Convert edt-ft5x06 to json-schema
Input: of_touchscreen - explicitly choose axis
Input: goodix - support gt9147 touchpanel
dt-bindings: touchscreen: goodix: support of gt9147
Input: goodix - add support for Goodix GT917S
Input: goodix - use string-based chip ID
dt-bindings: input: touchscreen: add compatible string for Goodix GT917S
Input: goodix - add support for more then one touch-key
Input: goodix - fix spurious key release events
Input: goodix - try to reset the controller if the i2c-test fails
Input: goodix - restore config on resume if necessary
Input: goodix - make goodix_send_cfg() take a raw buffer as argument
Input: goodix - add minimum firmware size check
Input: goodix - save a copy of the config from goodix_read_config()
Input: goodix - move defines to above struct goodix_ts_data declaration
Input: goodix - add support for controlling the IRQ pin through ACPI methods
Input: goodix - add support for getting IRQ + reset GPIOs on Bay Trail devices
...
Merge more updates from Andrew Morton:
- a lot more of MM, quite a bit more yet to come: (memcg, pagemap,
vmalloc, pagealloc, migration, thp, ksm, madvise, virtio,
userfaultfd, memory-hotplug, shmem, rmap, zswap, zsmalloc, cleanups)
- various other subsystems (procfs, misc, MAINTAINERS, bitops, lib,
checkpatch, epoll, binfmt, kallsyms, reiserfs, kmod, gcov, kconfig,
ubsan, fault-injection, ipc)
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (158 commits)
ipc/shm.c: make compat_ksys_shmctl() static
ipc/mqueue.c: fix a brace coding style issue
lib/Kconfig.debug: fix a typo "capabilitiy" -> "capability"
ubsan: include bug type in report header
kasan: unset panic_on_warn before calling panic()
ubsan: check panic_on_warn
drivers/misc/lkdtm/bugs.c: add arithmetic overflow and array bounds checks
ubsan: split "bounds" checker from other options
ubsan: add trap instrumentation option
init/Kconfig: clean up ANON_INODES and old IO schedulers options
kernel/gcov/fs.c: replace zero-length array with flexible-array member
gcov: gcc_3_4: replace zero-length array with flexible-array member
gcov: gcc_4_7: replace zero-length array with flexible-array member
kernel/kmod.c: fix a typo "assuems" -> "assumes"
reiserfs: clean up several indentation issues
kallsyms: unexport kallsyms_lookup_name() and kallsyms_on_each_symbol()
samples/hw_breakpoint: drop use of kallsyms_lookup_name()
samples/hw_breakpoint: drop HW_BREAKPOINT_R when reporting writes
fs/binfmt_elf.c: don't free interpreter's ELF pheaders on common path
fs/binfmt_elf.c: allocate less for static executable
...
- New mode for time travel, external via virtio
- Fixes for ubd to make sure no requests can get lost
- Fixes for vector networking
- Allow CONFIG_STATIC_LINK only when possible
- Minor cleanups and fixes
-----BEGIN PGP SIGNATURE-----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=WVcL
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml
Pull UML updates from Richard Weinberger:
- New mode for time travel, external via virtio
- Fixes for ubd to make sure no requests can get lost
- Fixes for vector networking
- Allow CONFIG_STATIC_LINK only when possible
- Minor cleanups and fixes
* tag 'for-linus-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
um: Remove some unnecessary NULL checks in vector_user.c
um: vector: Avoid NULL ptr deference if transport is unset
um: Make CONFIG_STATIC_LINK actually static
um: Implement cpu_relax() as ndelay(1) for time-travel
um: Implement ndelay/udelay in time-travel mode
um: Implement time-travel=ext
um: virtio: Implement VHOST_USER_PROTOCOL_F_INBAND_NOTIFICATIONS
um: time-travel: Rewrite as an event scheduler
um: Move timer-internal.h to non-shared
hostfs: Use kasprintf() instead of fixed buffer formatting
um: falloc.h needs to be directly included for older libc
um: ubd: Retry buffer read on any kind of error
um: ubd: Prevent buffer overrun on command completion
um: Fix overlapping ELF segments when statically linked
um: Delete never executed timer
um: Don't overwrite ethtool driver version
um: Fix len of file in create_pid_file
um: Don't use console_drivers directly
um: Cleanup CONFIG_IOSCHED_CFQ
Introduce the new uffd-wp APIs for userspace.
Firstly, we'll allow to do UFFDIO_REGISTER with write protection tracking
using the new UFFDIO_REGISTER_MODE_WP flag. Note that this flag can
co-exist with the existing UFFDIO_REGISTER_MODE_MISSING, in which case the
userspace program can not only resolve missing page faults, and at the
same time tracking page data changes along the way.
Secondly, we introduced the new UFFDIO_WRITEPROTECT API to do page level
write protection tracking. Note that we will need to register the memory
region with UFFDIO_REGISTER_MODE_WP before that.
[peterx@redhat.com: write up the commit message]
[peterx@redhat.com: remove useless block, write commit message, check against
VM_MAYWRITE rather than VM_WRITE when register]
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Cc: Bobby Powers <bobbypowers@gmail.com>
Cc: Brian Geffon <bgeffon@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Denis Plotnikov <dplotnikov@virtuozzo.com>
Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Martin Cracauer <cracauer@cons.org>
Cc: Marty McFadden <mcfadden8@llnl.gov>
Cc: Maya Gokhale <gokhale2@llnl.gov>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Shaohua Li <shli@fb.com>
Link: http://lkml.kernel.org/r/20200220163112.11409-14-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add support for the page reporting feature provided by virtio-balloon.
Reporting differs from the regular balloon functionality in that is is
much less durable than a standard memory balloon. Instead of creating a
list of pages that cannot be accessed the pages are only inaccessible
while they are being indicated to the virtio interface. Once the
interface has acknowledged them they are placed back into their respective
free lists and are once again accessible by the guest system.
Unlike a standard balloon we don't inflate and deflate the pages. Instead
we perform the reporting, and once the reporting is completed it is
assumed that the page has been dropped from the guest and will be faulted
back in the next time the page is accessed.
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Nitesh Narayan Lal <nitesh@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pankaj Gupta <pagupta@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Wang <wei.w.wang@intel.com>
Cc: Yang Zhang <yang.zhang.wz@gmail.com>
Cc: wei qi <weiqi4@huawei.com>
Link: http://lkml.kernel.org/r/20200211224657.29318.68624.stgit@localhost.localdomain
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAl6LFJ0ACgkQnJ2qBz9k
QNkSUQgAzwaescnHeVTF7/Zg9Uj2xrfrTJZ1E+Mn9qnd/0/z/asVV+RKfY7Gnu7h
g19inDI4ZESFz2gWz4jwJD1c2/yMZb8vnae4ye3dtCv2yjG/0JxCeue6vjwsWqmO
4jbSgk8YNQqzwEFVMzNp43ZJr3CFooLCIsJcL8q4yYk8Kt4pDUPmQ1vBvAc6k9vK
BKMBvp926tbomP27nq0n0CjvHy7ipDGMl4H6i4vBxHRfbDPih2x9VEklK3JatC1n
4AKS6IYJrkZVdOjli+DrResbcWxyT4db5tPio5MU0RDnVhNZT2cHyNVXf5EpRJqP
72pa7gfPu1Rx1+tU8bDR/daSveou2A==
=fkCV
-----END PGP SIGNATURE-----
Merge tag 'fsnotify_for_v5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify updates from Jan Kara:
"This implements the fanotify FAN_DIR_MODIFY event.
This event reports the name in a directory under which a change
happened and together with the directory filehandle and fstatat()
allows reliable and efficient implementation of directory
synchronization"
* tag 'fsnotify_for_v5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fanotify: Fix the checks in fanotify_fsid_equal
fanotify: report name info for FAN_DIR_MODIFY event
fanotify: record name info for FAN_DIR_MODIFY event
fanotify: Drop fanotify_event_has_fid()
fanotify: prepare to report both parent and child fid's
fanotify: send FAN_DIR_MODIFY event flavor with dir inode and name
fanotify: divorce fanotify_path_event and fanotify_fid_event
fanotify: Store fanotify handles differently
fanotify: Simplify create_fd()
fanotify: fix merging marks masks with FAN_ONDIR
fanotify: merge duplicate events on parent and child
fsnotify: replace inode pointer with an object id
fsnotify: simplify arguments passing to fsnotify_parent()
fsnotify: use helpers to access data by data_type
fsnotify: funnel all dirent events through fsnotify_name()
fsnotify: factor helpers fsnotify_dentry() and fsnotify_file()
fsnotify: tidy up FS_ and FAN_ constants
core:
- Support for cgroup tracking in samples to allow cgroup based
analysis
tools:
- Support for cgroup analysis
- Commandline option and hotkey for perf top to change the sort order
- A set of fixes all over the place
- Various build system related improvements
- Updates of the X86 pmu event JSON data
- Documentation updates
-----BEGIN PGP SIGNATURE-----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=2UUD
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2020-04-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull more perf updates from Thomas Gleixner:
"Perf updates all over the place:
core:
- Support for cgroup tracking in samples to allow cgroup based
analysis
tools:
- Support for cgroup analysis
- Commandline option and hotkey for perf top to change the sort order
- A set of fixes all over the place
- Various build system related improvements
- Updates of the X86 pmu event JSON data
- Documentation updates"
* tag 'perf-urgent-2020-04-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (55 commits)
perf python: Fix clang detection to strip out options passed in $CC
perf tools: Support Python 3.8+ in Makefile
perf script: Fix invalid read of directory entry after closedir()
perf script report: Fix SEGFAULT when using DWARF mode
perf script: add -S/--symbols documentation
perf pmu-events x86: Use CPU_CLK_UNHALTED.THREAD in Kernel_Utilization metric
perf events parser: Add missing Intel CPU events to parser
perf script: Allow --symbol to accept hexadecimal addresses
perf report/top TUI: Fix title line formatting
perf top: Support hotkey to change sort order
perf top: Support --group-sort-idx to change the sort order
perf symbols: Fix arm64 gap between kernel start and module end
perf build-test: Honour JOBS to override detection of number of cores
perf script: Add --show-cgroup-events option
perf top: Add --all-cgroups option
perf record: Add --all-cgroups option
perf record: Support synthesizing cgroup events
perf report: Add 'cgroup' sort key
perf cgroup: Maintain cgroup hierarchy
perf tools: Basic support for CGROUP event
...
Subsystem:
- The rtc_time_to_tm and rtc_tm_to_time wrappers have finally been removed and
only the 64bit version remain.
- hctosys now works with drivers compiled as modules
New driver:
- MediaTek MT2712 SoC based RTC
Drivers:
- set range for 88pm860x, au1xxx, cpcap, da9052, davinci, ds1305, ds1374,
mcp5121, pl030, pl031, pm8xxx, puv3, sa1100, sirfsoc, starfire, sun6i
- ds1307: DS1388 oscillator failure detection and watchdog support
- jz4740: JZ4760 support
- pcf85063: clock out pin support
- sun6i: external 32k oscillator is now optional, the range is now handled by
the core, providing a solution for 2034.
-----BEGIN PGP SIGNATURE-----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=6Veu
-----END PGP SIGNATURE-----
Merge tag 'rtc-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"More cleanup this cycle, with the final goal of removing the
rtc_time_to_tm and rtc_tm_to_time wrappers. All the drivers that have
been modified for this now are ready for the end of times (whether it
happens in 2033, 2038, 2106, 2127 or even 4052). There is also a
single new driver and the usual fixes and features.
Summary:
Subsystem:
- The rtc_time_to_tm and rtc_tm_to_time wrappers have finally been
removed and only the 64bit version remain.
- hctosys now works with drivers compiled as modules
New driver:
- MediaTek MT2712 SoC based RTC
Drivers:
- set range for 88pm860x, au1xxx, cpcap, da9052, davinci, ds1305,
ds1374, mcp5121, pl030, pl031, pm8xxx, puv3, sa1100, sirfsoc,
starfire, sun6i
- ds1307: DS1388 oscillator failure detection and watchdog support
- jz4740: JZ4760 support
- pcf85063: clock out pin support
- sun6i: external 32k oscillator is now optional, the range is now
handled by the core, providing a solution for 2034"
* tag 'rtc-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (87 commits)
rtc: ds1307: check for failed memory allocation on wdt
rtc: class: remove redundant assignment to variable err
rtc: remove rtc_time_to_tm and rtc_tm_to_time
rtc: sun6i: let the core handle rtc range
rtc: sun6i: switch to rtc_time64_to_tm/rtc_tm_to_time64
rtc: ds1307: add support for watchdog timer on ds1388
rtc: da9052: switch to rtc_time64_to_tm/rtc_tm_to_time64
rtc: da9052: set range
rtc: da9052: convert to devm_rtc_allocate_device
rtc: imx-sc: Align imx sc msg structs to 4
rtc: fsl-ftm-alarm: report alarm to core
rtc: pcf85063: Add pcf85063 clkout control to common clock framework
rtc: make definitions in include/uapi/linux/rtc.h actually useful for user space
rtc: class: avoid unnecessary lookup in hctosys
dt-bindings: rtc: Convert and update jz4740-rtc doc to YAML
rtc: jz4740: Rename vendor-specific DT properties
rtc: jz4740: Add support for JZ4760 SoC
rtc: class: support hctosys from modular RTC drivers
rtc: pm8xxx: clear alarm register when alarm is not enabled
rtc: omap: drop unused dt-bindings header
...
Core and userspace API:
- The userspace API KFIFOs have been imoproved with locks that
do not block interrupts. This makes us better at getting
events to userspace without blocking or disturbing new events
arriving in the same time. This was reviewed by the KFIFO
maintainer Stefani. This is a generic improvement which
paves the road for similar improvements in other subsystems.
- We provide a new ioctl() for monitoring changes in the line
information, such as when multiple clients are taking lines
and giving them back, possibly reconfiguring them in the
process: we can now monitor that and not get stuck with stale
static information.
- An example tool 'gpio-watch' is provided to showcase this
functionality.
- Timestamps for events are switched to ktime_get_ns() which is
monotonic. We previously had a 'realtime' stamp which could
move forward and *backward* in time, which probably would just
cause silent bugs and weird behaviour. In the long run we
see two relevant timestamps: ktime_get_ns() or the timestamp
sometimes provided by the GPIO hardware itself, if that
exists.
- Device Tree overlay support for GPIO hogs. On systems that
load overlays, these overlays can now contain hogs, and will
then be respected.
- Handle pin control interaction with nonexisting pin ranges
in the GPIO library core instead of in the individual
drivers.
New drivers:
- New driver for the Mellanox BlueField 2 GPIO controller.
Driver improvements:
- Introduce the BGPIOF_NO_SET_ON_INPUT flag to the generic
MMIO GPIO library and use this flag in the MT7621 driver.
- Texas Instruments OMAP CPU power management improvements,
such as blocking of idle on pending GPIO interrupts.
-----BEGIN PGP SIGNATURE-----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=EFm/
-----END PGP SIGNATURE-----
Merge tag 'gpio-v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO updates from Linus Walleij:
"This is the bulk of GPIO development for the v5.7 kernel cycle.
Core and userspace API:
- The userspace API KFIFOs have been imoproved with locks that do not
block interrupts. This makes us better at getting events to
userspace without blocking or disturbing new events arriving in the
same time. This was reviewed by the KFIFO maintainer Stefani. This
is a generic improvement which paves the road for similar
improvements in other subsystems.
- We provide a new ioctl() for monitoring changes in the line
information, such as when multiple clients are taking lines and
giving them back, possibly reconfiguring them in the process: we
can now monitor that and not get stuck with stale static
information.
- An example tool 'gpio-watch' is provided to showcase this
functionality.
- Timestamps for events are switched to ktime_get_ns() which is
monotonic. We previously had a 'realtime' stamp which could move
forward and *backward* in time, which probably would just cause
silent bugs and weird behaviour. In the long run we see two
relevant timestamps: ktime_get_ns() or the timestamp sometimes
provided by the GPIO hardware itself, if that exists.
- Device Tree overlay support for GPIO hogs. On systems that load
overlays, these overlays can now contain hogs, and will then be
respected.
- Handle pin control interaction with nonexisting pin ranges in the
GPIO library core instead of in the individual drivers.
New drivers:
- New driver for the Mellanox BlueField 2 GPIO controller.
Driver improvements:
- Introduce the BGPIOF_NO_SET_ON_INPUT flag to the generic MMIO GPIO
library and use this flag in the MT7621 driver.
- Texas Instruments OMAP CPU power management improvements, such as
blocking of idle on pending GPIO interrupts"
* tag 'gpio-v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (59 commits)
Revert "gpio: eic-sprd: Use devm_platform_ioremap_resource()"
pinctrl: Unconditionally assign .request()/.free()
gpio: Unconditionally assign .request()/.free()
gpio: export of_pinctrl_get to modules
pinctrl: Define of_pinctrl_get() dummy for !PINCTRL
gpio: Rename variable in core APIs
gpio: Avoid using pin ranges with !PINCTRL
gpiolib: Remove unused gpio_chip parameter from gpio_set_bias()
gpiolib: Pass gpio_desc to gpio_set_config()
gpiolib: Introduce gpiod_set_config()
tools: gpio: Fix out-of-tree build regression
gpio: gpiolib: fix a doc warning
gpio: tegra186: Add Tegra194 pin ranges for GG.0 and GG.1
gpio: tegra186: Add support for pin ranges
gpio: Support GPIO controllers without pin-ranges
ARM: integrator: impd1: Use GPIO_LOOKUP() helper macro
gpio: brcmstb: support gpio-line-names property
tools: gpio: Fix typo in gpio-utils
tools: gpio-hammer: Apply scripts/Lindent and retain good changes
gpiolib: gpio_name_to_desc: factor out !name check
...
- vfio-pci SR-IOV support (Alex Williamson)
- vfio DMA read/write interface (Yan Zhao)
- Fix vfio-platform erroneous IRQ error log (Eric Auger)
- Fix shared ATSD support for NVLink on POWER (Sam Bobroff)
- Fix init error without CONFIG_IOMMU_DMA (Andre Przywara)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)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=RZWJ
-----END PGP SIGNATURE-----
Merge tag 'vfio-v5.7-rc1' of git://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- vfio-pci SR-IOV support (Alex Williamson)
- vfio DMA read/write interface (Yan Zhao)
- Fix vfio-platform erroneous IRQ error log (Eric Auger)
- Fix shared ATSD support for NVLink on POWER (Sam Bobroff)
- Fix init error without CONFIG_IOMMU_DMA (Andre Przywara)
* tag 'vfio-v5.7-rc1' of git://github.com/awilliam/linux-vfio:
vfio: Ignore -ENODEV when getting MSI cookie
vfio-pci/nvlink2: Allow fallback to ibm,mmio-atsd[0]
vfio/pci: Cleanup .probe() exit paths
vfio/pci: Remove dev_fmt definition
vfio/pci: Add sriov_configure support
vfio: Introduce VFIO_DEVICE_FEATURE ioctl and first user
vfio/pci: Introduce VF token
vfio/pci: Implement match ops
vfio: Include optional device match in vfio_device_ops callbacks
vfio: avoid inefficient operations on VFIO group in vfio_pin/unpin_pages
vfio: introduce vfio_dma_rw to read/write a range of IOVAs
vfio: allow external user to get vfio group from device
vfio: platform: Switch to platform_get_irq_optional()
perf python:
Arnaldo Carvalho de Melo:
- Fix clang detection to strip out options passed in $CC.
build:
He Zhe:
- Normalize gcc parameter when generating arch errno table, fixing
the build by removing options from $(CC).
Sam Lunt:
- Support Python 3.8+ in Makefile.
perf report/top:
Arnaldo Carvalho de Melo:
- Fix title line formatting.
perf script:
Andreas Gerstmayr:
- Fix SEGFAULT when using DWARF mode.
- Fix invalid read of directory entry after closedir(), found with valgrind.
Hagen Paul Pfeifer:
- Introduce --deltatime option.
Stephane Eranian:
- Allow --symbol to accept hexadecimal addresses.
Ian Rogers:
- Add -S/--symbols documentation
Namhyung Kim:
- Add --show-cgroup-events option.
perf python:
Arnaldo Carvalho de Melo:
- Include rwsem.c in the python binding, needed by the cgroups improvements.
build-test:
Arnaldo Carvalho de Melo:
- Honour JOBS to override detection of number of cores
perf top:
Jin Yao:
- Support --group-sort-idx to change the sort order
- perf top: Support hotkey to change sort order
perf pmu-events x86:
Jin Yao:
- Use CPU_CLK_UNHALTED.THREAD in Kernel_Utilization metric
perf symbols arm64:
Kemeng Shi:
- Fix arm64 gap between kernel start and module end
kernel perf subsystem:
Namhyung Kim:
- Add PERF_RECORD_CGROUP event and Add PERF_SAMPLE_CGROUP feature,
to allow cgroup tracking, saving a link between cgroup path and
its id number.
perf cgroup:
Namhyung Kim:
- Maintain cgroup hierarchy.
perf report:
Namhyung Kim:
- Add 'cgroup' sort key.
perf record:
Namhyung Kim:
- Support synthesizing cgroup events for pre-existing cgroups.
- Add --all-cgroups option
Documentation:
Tony Jones:
- Update docs regarding kernel/user space unwinding.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCXodMtwAKCRCyPKLppCJ+
J+leAP0Ws0dGzMSIwcMVc7zvK1IsYOTlZ8lYXJePxD+Po/YPdAEA6Squf4gwZ2wm
b9R7w50dlCkMJ9LaueCeZZjh/4asFwQ=
=auOb
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-for-mingo-5.7-20200403' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes and improvements from Arnaldo Carvalho de Melo:
perf python:
Arnaldo Carvalho de Melo:
- Fix clang detection to strip out options passed in $CC.
build:
He Zhe:
- Normalize gcc parameter when generating arch errno table, fixing
the build by removing options from $(CC).
Sam Lunt:
- Support Python 3.8+ in Makefile.
perf report/top:
Arnaldo Carvalho de Melo:
- Fix title line formatting.
perf script:
Andreas Gerstmayr:
- Fix SEGFAULT when using DWARF mode.
- Fix invalid read of directory entry after closedir(), found with valgrind.
Hagen Paul Pfeifer:
- Introduce --deltatime option.
Stephane Eranian:
- Allow --symbol to accept hexadecimal addresses.
Ian Rogers:
- Add -S/--symbols documentation
Namhyung Kim:
- Add --show-cgroup-events option.
perf python:
Arnaldo Carvalho de Melo:
- Include rwsem.c in the python binding, needed by the cgroups improvements.
build-test:
Arnaldo Carvalho de Melo:
- Honour JOBS to override detection of number of cores
perf top:
Jin Yao:
- Support --group-sort-idx to change the sort order
- perf top: Support hotkey to change sort order
perf pmu-events x86:
Jin Yao:
- Use CPU_CLK_UNHALTED.THREAD in Kernel_Utilization metric
perf symbols arm64:
Kemeng Shi:
- Fix arm64 gap between kernel start and module end
kernel perf subsystem:
Namhyung Kim:
- Add PERF_RECORD_CGROUP event and Add PERF_SAMPLE_CGROUP feature,
to allow cgroup tracking, saving a link between cgroup path and
its id number.
perf cgroup:
Namhyung Kim:
- Maintain cgroup hierarchy.
perf report:
Namhyung Kim:
- Add 'cgroup' sort key.
perf record:
Namhyung Kim:
- Support synthesizing cgroup events for pre-existing cgroups.
- Add --all-cgroups option
Documentation:
Tony Jones:
- Update docs regarding kernel/user space unwinding.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=deWu
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Revert sysfs "rescan" renames that broke apps (Kelsey Skunberg)
- Add more 32 GT/s link speed decoding and improve the implementation
(Yicong Yang)
Resource management:
- Add support for sizing programmable host bridge apertures and fix a
related alpha Nautilus regression (Ivan Kokshaysky)
Interrupts:
- Add boot interrupt quirk mechanism for Xeon chipsets and document
boot interrupts (Sean V Kelley)
PCIe native device hotplug:
- When possible, disable in-band presence detect and use PDS
(Alexandru Gagniuc)
- Add DMI table for devices that don't use in-band presence detection
but don't advertise that correctly (Stuart Hayes)
- Fix hang when powering slots up/down via sysfs (Lukas Wunner)
- Fix an MSI interrupt race (Stuart Hayes)
Virtualization:
- Add ACS quirks for Zhaoxin devices (Raymond Pang)
Error handling:
- Add Error Disconnect Recover (EDR) support so firmware can report
devices disconnected via DPC and we can try to recover (Kuppuswamy
Sathyanarayanan)
Peer-to-peer DMA:
- Add Intel Sky Lake-E Root Ports B, C, D to the whitelist (Andrew
Maier)
ASPM:
- Reduce severity of common clock config message (Chris Packham)
- Clear the correct bits when enabling L1 substates, so we don't go
to the wrong state (Yicong Yang)
Endpoint framework:
- Replace EPF linkup ops with notifier call chain and improve locking
(Kishon Vijay Abraham I)
- Fix concurrent memory allocation in OB address region (Kishon Vijay
Abraham I)
- Move PF function number assignment to EPC core to support multiple
function creation methods (Kishon Vijay Abraham I)
- Fix issue with clearing configfs "start" entry (Kunihiko Hayashi)
- Fix issue with endpoint MSI-X ignoring BAR Indicator and Table
Offset (Kishon Vijay Abraham I)
- Add support for testing DMA transfers (Kishon Vijay Abraham I)
- Add support for testing > 10 endpoint devices (Kishon Vijay Abraham I)
- Add support for tests to clear IRQ (Kishon Vijay Abraham I)
- Add common DT schema for endpoint controllers (Kishon Vijay Abraham I)
Amlogic Meson PCIe controller driver:
- Add DT bindings for AXG PCIe PHY, shared MIPI/PCIe analog PHY (Remi
Pommarel)
- Add Amlogic AXG PCIe PHY, AXG MIPI/PCIe analog PHY drivers (Remi
Pommarel)
Cadence PCIe controller driver:
- Add Root Complex/Endpoint DT schema for Cadence PCIe (Kishon Vijay
Abraham I)
Intel VMD host bridge driver:
- Add two VMD Device IDs that require bus restriction mode (Sushma
Kalakota)
Mobiveil PCIe controller driver:
- Refactor and modularize mobiveil driver (Hou Zhiqiang)
- Add support for Mobiveil GPEX Gen4 host (Hou Zhiqiang)
Microsoft Hyper-V host bridge driver:
- Add support for Hyper-V PCI protocol version 1.3 and
PCI_BUS_RELATIONS2 (Long Li)
- Refactor to prepare for virtual PCI on non-x86 architectures (Boqun
Feng)
- Fix memory leak in hv_pci_probe()'s error path (Dexuan Cui)
NVIDIA Tegra PCIe controller driver:
- Use pci_parse_request_of_pci_ranges() (Rob Herring)
- Add support for endpoint mode and related DT updates (Vidya Sagar)
- Reduce -EPROBE_DEFER error message log level (Thierry Reding)
Qualcomm PCIe controller driver:
- Restrict class fixup to specific Qualcomm devices (Bjorn Andersson)
Synopsys DesignWare PCIe controller driver:
- Refactor core initialization code for endpoint mode (Vidya Sagar)
- Fix endpoint MSI-X to use correct table address (Kishon Vijay
Abraham I)
TI DRA7xx PCIe controller driver:
- Fix MSI IRQ handling (Vignesh Raghavendra)
TI Keystone PCIe controller driver:
- Allow AM654 endpoint to raise MSI-X interrupt (Kishon Vijay Abraham I)
Miscellaneous:
- Quirk ASMedia XHCI USB to avoid "PME# from D0" defect (Kai-Heng
Feng)
- Use ioremap(), not phys_to_virt(), for platform ROM to fix video
ROM mapping with CONFIG_HIGHMEM (Mikel Rychliski)"
* tag 'pci-v5.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (96 commits)
misc: pci_endpoint_test: remove duplicate macro PCI_ENDPOINT_TEST_STATUS
PCI: tegra: Print -EPROBE_DEFER error message at debug level
misc: pci_endpoint_test: Use full pci-endpoint-test name in request_irq()
misc: pci_endpoint_test: Fix to support > 10 pci-endpoint-test devices
tools: PCI: Add 'e' to clear IRQ
misc: pci_endpoint_test: Add ioctl to clear IRQ
misc: pci_endpoint_test: Avoid using module parameter to determine irqtype
PCI: keystone: Allow AM654 PCIe Endpoint to raise MSI-X interrupt
PCI: dwc: Fix dw_pcie_ep_raise_msix_irq() to get correct MSI-X table address
PCI: endpoint: Fix ->set_msix() to take BIR and offset as arguments
misc: pci_endpoint_test: Add support to get DMA option from userspace
tools: PCI: Add 'd' command line option to support DMA
misc: pci_endpoint_test: Use streaming DMA APIs for buffer allocation
PCI: endpoint: functions/pci-epf-test: Print throughput information
PCI: endpoint: functions/pci-epf-test: Add DMA support to transfer data
PCI: pciehp: Fix MSI interrupt race
PCI: pciehp: Fix indefinite wait on sysfs requests
PCI: endpoint: Fix clearing start entry in configfs
PCI: tegra: Add support for PCIe endpoint mode in Tegra194
PCI: sysfs: Revert "rescan" file renames
...
Here is the big set of char/misc/other driver patches for 5.7-rc1.
Lots of things in here, and it's later than expected due to some reverts
to resolve some reported issues. All is now clean with no reported
problems in linux-next.
Included in here is:
- interconnect updates
- mei driver updates
- uio updates
- nvmem driver updates
- soundwire updates
- binderfs updates
- coresight updates
- habanalabs updates
- mhi new bus type and core
- extcon driver updates
- some Kconfig cleanups
- other small misc driver cleanups and updates
As mentioned, all have been in linux-next for a while, and with the last
two reverts, all is calm and good.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXodfvA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynzCQCfROhar3E8EhYEqSOP6xq6uhX9uegAnRgGY2rs
rN4JJpOcTddvZcVlD+vo
=ocWk
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big set of char/misc/other driver patches for 5.7-rc1.
Lots of things in here, and it's later than expected due to some
reverts to resolve some reported issues. All is now clean with no
reported problems in linux-next.
Included in here is:
- interconnect updates
- mei driver updates
- uio updates
- nvmem driver updates
- soundwire updates
- binderfs updates
- coresight updates
- habanalabs updates
- mhi new bus type and core
- extcon driver updates
- some Kconfig cleanups
- other small misc driver cleanups and updates
As mentioned, all have been in linux-next for a while, and with the
last two reverts, all is calm and good"
* tag 'char-misc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (174 commits)
Revert "driver core: platform: Initialize dma_parms for platform devices"
Revert "amba: Initialize dma_parms for amba devices"
amba: Initialize dma_parms for amba devices
driver core: platform: Initialize dma_parms for platform devices
bus: mhi: core: Drop the references to mhi_dev in mhi_destroy_device()
bus: mhi: core: Initialize bhie field in mhi_cntrl for RDDM capture
bus: mhi: core: Add support for reading MHI info from device
misc: rtsx: set correct pcr_ops for rts522A
speakup: misc: Use dynamic minor numbers for speakup devices
mei: me: add cedar fork device ids
coresight: do not use the BIT() macro in the UAPI header
Documentation: provide IBM contacts for embargoed hardware
nvmem: core: remove nvmem_sysfs_get_groups()
nvmem: core: use is_bin_visible for permissions
nvmem: core: use device_register and device_unregister
nvmem: core: add root_only member to nvmem device struct
extcon: axp288: Add wakeup support
extcon: Mark extcon_get_edev_name() function as exported symbol
extcon: palmas: Hide error messages if gpio returns -EPROBE_DEFER
dt-bindings: extcon: usbc-cros-ec: convert extcon-usbc-cros-ec.txt to yaml format
...
Pull cgroup updates from Tejun Heo:
- Christian extended clone3 so that processes can be spawned into
cgroups directly.
This is not only neat in terms of semantics but also avoids grabbing
the global cgroup_threadgroup_rwsem for migration.
- Daniel added !root xattr support to cgroupfs.
Userland already uses xattrs on cgroupfs for bookkeeping. This will
allow delegated cgroups to support such usages.
- Prateek tried to make cpuset hotplug handling synchronous but that
led to possible deadlock scenarios. Reverted.
- Other minor changes including release_agent_path handling cleanup.
* 'for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
docs: cgroup-v1: Document the cpuset_v2_mode mount option
Revert "cpuset: Make cpuset hotplug synchronous"
cgroupfs: Support user xattrs
kernfs: Add option to enable user xattrs
kernfs: Add removed_size out param for simple_xattr_set
kernfs: kvmalloc xattr value instead of kmalloc
cgroup: Restructure release_agent_path handling
selftests/cgroup: add tests for cloning into cgroups
clone3: allow spawning processes into cgroups
cgroup: add cgroup_may_write() helper
cgroup: refactor fork helpers
cgroup: add cgroup_get_from_file() helper
cgroup: unify attach permission checking
cpuset: Make cpuset hotplug synchronous
cgroup.c: Use built-in RCU list checking
kselftest/cgroup: add cgroup destruction test
cgroup: Clean up css_set task traversal
- Core:
- Some code cleanup and optimization in core by Andy
- Debugfs support for displaying dmaengine channels by Peter
- Drivers:
- New driver for uniphier-xdmac controller
- Updates to stm32 dma, mdma and dmamux drivers and PM support
- More updates to idxd drivers
- Bunch of changes in tegra-apb driver and cleaning up of pm functions
- Bunch of spelling fixes and Replace zero-length array patches
- Shutdown hook for fsl-dpaa2-qdma driver
- Support for interleaved transfers for ti-edma and virtualization
support for k3-dma driver
- Support for reset and updates in xilinx_dma driver
- Improvements and locking updates in at_hdma driver
-----BEGIN PGP SIGNATURE-----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=+UJ7
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-5.7-rc1' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine updates from Vinod Koul:
"Core:
- Some code cleanup and optimization in core by Andy
- Debugfs support for displaying dmaengine channels by Peter
Drivers:
- New driver for uniphier-xdmac controller
- Updates to stm32 dma, mdma and dmamux drivers and PM support
- More updates to idxd drivers
- Bunch of changes in tegra-apb driver and cleaning up of pm
functions
- Bunch of spelling fixes and Replace zero-length array patches
- Shutdown hook for fsl-dpaa2-qdma driver
- Support for interleaved transfers for ti-edma and virtualization
support for k3-dma driver
- Support for reset and updates in xilinx_dma driver
- Improvements and locking updates in at_hdma driver"
* tag 'dmaengine-5.7-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (89 commits)
dt-bindings: dma: renesas,usb-dmac: add r8a77961 support
dmaengine: uniphier-xdmac: Remove redandant error log for platform_get_irq
dmaengine: tegra-apb: Improve DMA synchronization
dmaengine: tegra-apb: Don't save/restore IRQ flags in interrupt handler
dmaengine: tegra-apb: mark PM functions as __maybe_unused
dmaengine: fix spelling mistake "exceds" -> "exceeds"
dmaengine: sprd: Set request pending flag when DMA controller is active
dmaengine: ppc4xx: Use scnprintf() for avoiding potential buffer overflow
dmaengine: idxd: remove global token limit check
dmaengine: idxd: reflect shadow copy of traffic class programming
dmaengine: idxd: Merge definition of dsa_batch_desc into dsa_hw_desc
dmaengine: Create debug directories for DMA devices
dmaengine: ti: k3-udma: Implement custom dbg_summary_show for debugfs
dmaengine: Add basic debugfs support
dmaengine: fsl-dpaa2-qdma: remove set but not used variable 'dpaa2_qdma'
dmaengine: ti: edma: fix null dereference because of a typo in pointer name
dmaengine: fsl-dpaa2-qdma: Adding shutdown hook
dmaengine: uniphier-xdmac: Add UniPhier external DMA controller driver
dt-bindings: dmaengine: Add UniPhier external DMA controller bindings
dmaengine: ti: k3-udma: Implement support for atype (for virtualization)
...
* GICv4.1 support
* 32bit host removal
PPC:
* secure (encrypted) using under the Protected Execution Framework
ultravisor
s390:
* allow disabling GISA (hardware interrupt injection) and protected
VMs/ultravisor support.
x86:
* New dirty bitmap flag that sets all bits in the bitmap when dirty
page logging is enabled; this is faster because it doesn't require bulk
modification of the page tables.
* Initial work on making nested SVM event injection more similar to VMX,
and less buggy.
* Various cleanups to MMU code (though the big ones and related
optimizations were delayed to 5.8). Instead of using cr3 in function
names which occasionally means eptp, KVM too has standardized on "pgd".
* A large refactoring of CPUID features, which now use an array that
parallels the core x86_features.
* Some removal of pointer chasing from kvm_x86_ops, which will also be
switched to static calls as soon as they are available.
* New Tigerlake CPUID features.
* More bugfixes, optimizations and cleanups.
Generic:
* selftests: cleanups, new MMU notifier stress test, steal-time test
* CSV output for kvm_stat.
KVM/MIPS has been broken since 5.5, it does not compile due to a patch committed
by MIPS maintainers. I had already prepared a fix, but the MIPS maintainers
prefer to fix it in generic code rather than KVM so they are taking care of it.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl6GOnIUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMfxwf/ZKLZiRoaovXCOG71M/eHtQb8ZIqU
3MPy+On3eC5Sk/aBxWUL9EFZsbYG6kYdbZ1VOvG9XPBoLlnkDSm/IR0kaELHtnjj
oGVda/tvGn46Ne39y8xBptmb91WDcWH0vFthT/CwlMxAw3xjr+gG7Qyo+8F2CW6m
SSSuLiHSBnyO1cQKruBTHZ8qnR8LlnfXEqtd6Y4LFLic0LbLIoIdRcT3wjQrcZrm
Djd7wbTEYZjUfoqZ72ekwEDUsONcDLDSKcguDO9pSMSCGhpxCVT5Vy68KRpoIMs2
nzNWDKjvqQo5zb2+GWxJgkd12Hv+n7PCXZMbVrWBu1pQsewUns9m4mkpGw==
=6fGt
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- GICv4.1 support
- 32bit host removal
PPC:
- secure (encrypted) using under the Protected Execution Framework
ultravisor
s390:
- allow disabling GISA (hardware interrupt injection) and protected
VMs/ultravisor support.
x86:
- New dirty bitmap flag that sets all bits in the bitmap when dirty
page logging is enabled; this is faster because it doesn't require
bulk modification of the page tables.
- Initial work on making nested SVM event injection more similar to
VMX, and less buggy.
- Various cleanups to MMU code (though the big ones and related
optimizations were delayed to 5.8). Instead of using cr3 in
function names which occasionally means eptp, KVM too has
standardized on "pgd".
- A large refactoring of CPUID features, which now use an array that
parallels the core x86_features.
- Some removal of pointer chasing from kvm_x86_ops, which will also
be switched to static calls as soon as they are available.
- New Tigerlake CPUID features.
- More bugfixes, optimizations and cleanups.
Generic:
- selftests: cleanups, new MMU notifier stress test, steal-time test
- CSV output for kvm_stat"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (277 commits)
x86/kvm: fix a missing-prototypes "vmread_error"
KVM: x86: Fix BUILD_BUG() in __cpuid_entry_get_reg() w/ CONFIG_UBSAN=y
KVM: VMX: Add a trampoline to fix VMREAD error handling
KVM: SVM: Annotate svm_x86_ops as __initdata
KVM: VMX: Annotate vmx_x86_ops as __initdata
KVM: x86: Drop __exit from kvm_x86_ops' hardware_unsetup()
KVM: x86: Copy kvm_x86_ops by value to eliminate layer of indirection
KVM: x86: Set kvm_x86_ops only after ->hardware_setup() completes
KVM: VMX: Configure runtime hooks using vmx_x86_ops
KVM: VMX: Move hardware_setup() definition below vmx_x86_ops
KVM: x86: Move init-only kvm_x86_ops to separate struct
KVM: Pass kvm_init()'s opaque param to additional arch funcs
s390/gmap: return proper error code on ksm unsharing
KVM: selftests: Fix cosmetic copy-paste error in vm_mem_region_move()
KVM: Fix out of range accesses to memslots
KVM: X86: Micro-optimize IPI fastpath delay
KVM: X86: Delay read msr data iff writes ICR MSR
KVM: PPC: Book3S HV: Add a capability for enabling secure guests
KVM: arm64: GICv4.1: Expose HW-based SGIs in debugfs
KVM: arm64: GICv4.1: Allow non-trapping WFI when using HW SGIs
...
- Use notification chain instead of EPF linkup ops for EPC events (Kishon
Vijay Abraham I)
- Protect concurrent allocation in endpoint outbound address region
(Kishon Vijay Abraham I)
- Protect concurrent access to pci_epf_ops (Kishon Vijay Abraham I)
- Assign function number for each PF in endpoint core (Kishon Vijay
Abraham I)
- Refactor endpoint mode core initialization (Vidya Sagar)
- Add API to notify when core initialization completes (Vidya Sagar)
- Add test framework support to defer core initialization (Vidya Sagar)
- Update Tegra SoC ABI header to support uninitialization of UPHY PLL
when in endpoint mode without reference clock (Vidya Sagar)
- Add DT and driver support for Tegra194 PCIe endpoint nodes (Vidya
Sagar)
- Add endpoint test support for DMA data transfer (Kishon Vijay
Abraham I)
- Print throughput information in endpoint test (Kishon Vijay Abraham I)
- Use streaming DMA APIs for endpoint test buffer allocation (Kishon
Vijay Abraham I)
- Add endpoint test command line option for DMA (Kishon Vijay Abraham I)
- When stopping a controller via configfs, clear endpoint "start" entry
to prevent WARN_ON (Kunihiko Hayashi)
- Update endpoint ->set_msix() to pay attention to MSI-X BAR Indicator
and offset when finding MSI-X tables (Kishon Vijay Abraham I)
- MSI-X tables are in local memory, not in the PCI address space. Update
pcie-designware-ep to account for this (Kishon Vijay Abraham I)
- Allow AM654 PCIe Endpoint to raise MSI-X interrupts (Kishon Vijay
Abraham I)
- Avoid using module parameter to determine irqtype for endpoint test
(Kishon Vijay Abraham I)
- Add ioctl to clear IRQ for endpoint test (Kishon Vijay Abraham I)
- Add endpoint test 'e' option to clear IRQ (Kishon Vijay Abraham I)
- Bump limit on number of endpoint test devices from 10 to 10,000 (Kishon
Vijay Abraham I)
- Use full pci-endpoint-test name in request_irq() for easier profiling
(Kishon Vijay Abraham I)
- Reduce log level of -EPROBE_DEFER error messages to debug (Thierry
Reding)
* remotes/lorenzo/pci/endpoint:
misc: pci_endpoint_test: remove duplicate macro PCI_ENDPOINT_TEST_STATUS
PCI: tegra: Print -EPROBE_DEFER error message at debug level
misc: pci_endpoint_test: Use full pci-endpoint-test name in request_irq()
misc: pci_endpoint_test: Fix to support > 10 pci-endpoint-test devices
tools: PCI: Add 'e' to clear IRQ
misc: pci_endpoint_test: Add ioctl to clear IRQ
misc: pci_endpoint_test: Avoid using module parameter to determine irqtype
PCI: keystone: Allow AM654 PCIe Endpoint to raise MSI-X interrupt
PCI: dwc: Fix dw_pcie_ep_raise_msix_irq() to get correct MSI-X table address
PCI: endpoint: Fix ->set_msix() to take BIR and offset as arguments
misc: pci_endpoint_test: Add support to get DMA option from userspace
tools: PCI: Add 'd' command line option to support DMA
misc: pci_endpoint_test: Use streaming DMA APIs for buffer allocation
PCI: endpoint: functions/pci-epf-test: Print throughput information
PCI: endpoint: functions/pci-epf-test: Add DMA support to transfer data
PCI: endpoint: Fix clearing start entry in configfs
PCI: tegra: Add support for PCIe endpoint mode in Tegra194
dt-bindings: PCI: tegra: Add DT support for PCIe EP nodes in Tegra194
soc/tegra: bpmp: Update ABI header
PCI: pci-epf-test: Add support to defer core initialization
PCI: dwc: Add API to notify core initialization completion
PCI: endpoint: Add notification for core init completion
PCI: dwc: Refactor core initialization code for EP mode
PCI: endpoint: Add core init notifying feature
PCI: endpoint: Assign function number for each PF in EPC core
PCI: endpoint: Protect concurrent access to pci_epf_ops with mutex
PCI: endpoint: Fix for concurrent memory allocation in OB address region
PCI: endpoint: Replace spinlock with mutex
PCI: endpoint: Use notification chain mechanism to notify EPC events to EPF
Add ioctl to clear IRQ which can be used to free the allocated
IRQ vectors and free the requested IRQ.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Add a new command line option 'd' to use DMA for data transfers.
It should be used with read, write or copy commands.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Alan Mikhak <alan.mikhak@sifive.com>
When remapping an anonymous, private mapping, if MREMAP_DONTUNMAP is set,
the source mapping will not be removed. The remap operation will be
performed as it would have been normally by moving over the page tables to
the new mapping. The old vma will have any locked flags cleared, have no
pagetables, and any userfaultfds that were watching that range will
continue watching it.
For a mapping that is shared or not anonymous, MREMAP_DONTUNMAP will cause
the mremap() call to fail. Because MREMAP_DONTUNMAP always results in
moving a VMA you MUST use the MREMAP_MAYMOVE flag, it's not possible to
resize a VMA while also moving with MREMAP_DONTUNMAP so old_len must
always be equal to the new_len otherwise it will return -EINVAL.
We hope to use this in Chrome OS where with userfaultfd we could write an
anonymous mapping to disk without having to STOP the process or worry
about VMA permission changes.
This feature also has a use case in Android, Lokesh Gidra has said that
"As part of using userfaultfd for GC, We'll have to move the physical
pages of the java heap to a separate location. For this purpose mremap
will be used. Without the MREMAP_DONTUNMAP flag, when I mremap the java
heap, its virtual mapping will be removed as well. Therefore, we'll
require performing mmap immediately after. This is not only time
consuming but also opens a time window where a native thread may call mmap
and reserve the java heap's address range for its own usage. This flag
solves the problem."
[bgeffon@google.com: v6]
Link: http://lkml.kernel.org/r/20200218173221.237674-1-bgeffon@google.com
[bgeffon@google.com: v7]
Link: http://lkml.kernel.org/r/20200221174248.244748-1-bgeffon@google.com
Signed-off-by: Brian Geffon <bgeffon@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Lokesh Gidra <lokeshgidra@google.com>
Reviewed-by: Minchan Kim <minchan@kernel.org>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: "Michael S . Tsirkin" <mst@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Deacon <will@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Sonny Rao <sonnyrao@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Jesse Barnes <jsbarnes@google.com>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Florian Weimer <fweimer@redhat.com>
Link: http://lkml.kernel.org/r/20200207201856.46070-1-bgeffon@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch introduces a vDPA-based vhost backend. This backend is
built on top of the same interface defined in virtio-vDPA and provides
a generic vhost interface for userspace to accelerate the virtio
devices in guest.
This backend is implemented as a vDPA device driver on top of the same
ops used in virtio-vDPA. It will create char device entry named
vhost-vdpa-$index for userspace to use. Userspace can use vhost ioctls
on top of this char device to setup the backend.
Vhost ioctls are extended to make it type agnostic and behave like a
virtio device, this help to eliminate type specific API like what
vhost_net/scsi/vsock did:
- VHOST_VDPA_GET_DEVICE_ID: get the virtio device ID which is defined
by virtio specification to differ from different type of devices
- VHOST_VDPA_GET_VRING_NUM: get the maximum size of virtqueue
supported by the vDPA device
- VHSOT_VDPA_SET/GET_STATUS: set and get virtio status of vDPA device
- VHOST_VDPA_SET/GET_CONFIG: access virtio config space
- VHOST_VDPA_SET_VRING_ENABLE: enable a specific virtqueue
For memory mapping, IOTLB API is mandated for vhost-vDPA which means
userspace drivers are required to use
VHOST_IOTLB_UPDATE/VHOST_IOTLB_INVALIDATE to add or remove mapping for
a specific userspace memory region.
The vhost-vDPA API is designed to be type agnostic, but it allows net
device only in current stage. Due to the lacking of control virtqueue
support, some features were filter out by vhost-vdpa.
We will enable more features and devices in the near future.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20200326140125.19794-8-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Replace the
/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
with
/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */
to help coreboot community consume this file without relaxing their
licensing checks.
Signed-off-by: Rajat Jain <rajatja@google.com>
Link: https://lore.kernel.org/r/20200329172513.133548-1-rajatja@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Pull networking updates from David Miller:
"Highlights:
1) Fix the iwlwifi regression, from Johannes Berg.
2) Support BSS coloring and 802.11 encapsulation offloading in
hardware, from John Crispin.
3) Fix some potential Spectre issues in qtnfmac, from Sergey
Matyukevich.
4) Add TTL decrement action to openvswitch, from Matteo Croce.
5) Allow paralleization through flow_action setup by not taking the
RTNL mutex, from Vlad Buslov.
6) A lot of zero-length array to flexible-array conversions, from
Gustavo A. R. Silva.
7) Align XDP statistics names across several drivers for consistency,
from Lorenzo Bianconi.
8) Add various pieces of infrastructure for offloading conntrack, and
make use of it in mlx5 driver, from Paul Blakey.
9) Allow using listening sockets in BPF sockmap, from Jakub Sitnicki.
10) Lots of parallelization improvements during configuration changes
in mlxsw driver, from Ido Schimmel.
11) Add support to devlink for generic packet traps, which report
packets dropped during ACL processing. And use them in mlxsw
driver. From Jiri Pirko.
12) Support bcmgenet on ACPI, from Jeremy Linton.
13) Make BPF compatible with RT, from Thomas Gleixnet, Alexei
Starovoitov, and your's truly.
14) Support XDP meta-data in virtio_net, from Yuya Kusakabe.
15) Fix sysfs permissions when network devices change namespaces, from
Christian Brauner.
16) Add a flags element to ethtool_ops so that drivers can more simply
indicate which coalescing parameters they actually support, and
therefore the generic layer can validate the user's ethtool
request. Use this in all drivers, from Jakub Kicinski.
17) Offload FIFO qdisc in mlxsw, from Petr Machata.
18) Support UDP sockets in sockmap, from Lorenz Bauer.
19) Fix stretch ACK bugs in several TCP congestion control modules,
from Pengcheng Yang.
20) Support virtual functiosn in octeontx2 driver, from Tomasz
Duszynski.
21) Add region operations for devlink and use it in ice driver to dump
NVM contents, from Jacob Keller.
22) Add support for hw offload of MACSEC, from Antoine Tenart.
23) Add support for BPF programs that can be attached to LSM hooks,
from KP Singh.
24) Support for multiple paths, path managers, and counters in MPTCP.
From Peter Krystad, Paolo Abeni, Florian Westphal, Davide Caratti,
and others.
25) More progress on adding the netlink interface to ethtool, from
Michal Kubecek"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2121 commits)
net: ipv6: rpl_iptunnel: Fix potential memory leak in rpl_do_srh_inline
cxgb4/chcr: nic-tls stats in ethtool
net: dsa: fix oops while probing Marvell DSA switches
net/bpfilter: remove superfluous testing message
net: macb: Fix handling of fixed-link node
net: dsa: ksz: Select KSZ protocol tag
netdevsim: dev: Fix memory leak in nsim_dev_take_snapshot_write
net: stmmac: add EHL 2.5Gbps PCI info and PCI ID
net: stmmac: add EHL PSE0 & PSE1 1Gbps PCI info and PCI ID
net: stmmac: create dwmac-intel.c to contain all Intel platform
net: dsa: bcm_sf2: Support specifying VLAN tag egress rule
net: dsa: bcm_sf2: Add support for matching VLAN TCI
net: dsa: bcm_sf2: Move writing of CFP_DATA(5) into slicing functions
net: dsa: bcm_sf2: Check earlier for FLOW_EXT and FLOW_MAC_EXT
net: dsa: bcm_sf2: Disable learning for ASP port
net: dsa: b53: Deny enslaving port 7 for 7278 into a bridge
net: dsa: b53: Prevent tagged VLAN on port 7 for 7278
net: dsa: b53: Restore VLAN entries upon (re)configuration
net: dsa: bcm_sf2: Fix overflow checks
hv_netvsc: Remove unnecessary round_up for recv_completion_cnt
...
- Add support for host software queue for (e)MMC/SD
- Throttle polling rate for CMD6
- Update CMD13 busy condition check for CMD6 commands
- Improve busy detect polling for erase/trim/discard/HPI
- Fixup support for HW busy detection for HPI commands
- Re-work and improve support for eMMC sanitize commands
MMC host:
- mmci: Add support for sdmmc variant revision 2.0
- mmci_sdmmc: Improve support for busyend detection
- mmci_sdmmc: Fixup support for signal voltage switch
- mmci_sdmmc: Add support for tuning with delay block
- mtk-sd: Fix another SDIO irq issue
- sdhci: Disable native card detect when GPIO based type exist
- sdhci: Add option to defer request completion
- sdhci_am654: Add support to set a tap value per speed mode
- sdhci-esdhc-imx: Add support for i.MX8MM based variant
- sdhci-esdhc-imx: Fixup support for standard tuning on i.MX8 usdhc
- sdhci-esdhc-imx: Optimize for strobe/clock dll settings
- sdhci-esdhc-imx: Fixup support for system and runtime suspend/resume
- sdhci-iproc: Update regulator/bus-voltage management for bcm2711
- sdhci-msm: Prevent clock gating with PWRSAVE_DLL on broken variants
- sdhci-msm: Fix management of CQE during SDHCI reset
- sdhci-of-arasan: Add support for auto tuning on ZynqMP based platforms
- sdhci-omap: Add support for system suspend/resume
- sdhci-sprd: Add support for HW busy detection
- sdhci-sprd: Enable support host software queue
- sdhci-tegra: Add support for HW busy detection
- tmio/renesas_sdhi: Enforce retune after runtime suspend
- renesas_sdhi: Use manual tap correction for HS400 on some variants
- renesas_sdhi: Add support for manual correction of tap values for tunings
-----BEGIN PGP SIGNATURE-----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=gILc
-----END PGP SIGNATURE-----
Merge tag 'mmc-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Add support for host software queue for (e)MMC/SD
- Throttle polling rate for CMD6
- Update CMD13 busy condition check for CMD6 commands
- Improve busy detect polling for erase/trim/discard/HPI
- Fixup support for HW busy detection for HPI commands
- Re-work and improve support for eMMC sanitize commands
MMC host:
- mmci:
* Add support for sdmmc variant revision 2.0
- mmci_sdmmc:
* Improve support for busyend detection
* Fixup support for signal voltage switch
* Add support for tuning with delay block
- mtk-sd:
* Fix another SDIO irq issue
- sdhci:
* Disable native card detect when GPIO based type exist
- sdhci:
* Add option to defer request completion
- sdhci_am654:
* Add support to set a tap value per speed mode
- sdhci-esdhc-imx:
* Add support for i.MX8MM based variant
* Fixup support for standard tuning on i.MX8 usdhc
* Optimize for strobe/clock dll settings
* Fixup support for system and runtime suspend/resume
- sdhci-iproc:
* Update regulator/bus-voltage management for bcm2711
- sdhci-msm:
* Prevent clock gating with PWRSAVE_DLL on broken variants
* Fix management of CQE during SDHCI reset
- sdhci-of-arasan:
* Add support for auto tuning on ZynqMP based platforms
- sdhci-omap:
* Add support for system suspend/resume
- sdhci-sprd:
* Add support for HW busy detection
* Enable support host software queue
- sdhci-tegra:
* Add support for HW busy detection
- tmio/renesas_sdhi:
* Enforce retune after runtime suspend
- renesas_sdhi:
* Use manual tap correction for HS400 on some variants
* Add support for manual correction of tap values for tunings"
* tag 'mmc-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (86 commits)
mmc: cavium-octeon: remove nonsense variable coercion
mmc: mediatek: fix SDIO irq issue
mmc: mmci_sdmmc: Fix clear busyd0end irq flag
dt-bindings: mmc: Fix node name in an example
mmc: core: Re-work the code for eMMC sanitize
mmc: sdhci: use FIELD_GET for preset value bit masks
mmc: sdhci-of-at91: Display clock changes for debug purpose only
mmc: sdhci: iproc: Add custom set_power() callback for bcm2711
mmc: sdhci: am654: Use sdhci_set_power_and_voltage()
mmc: sdhci: at91: Use sdhci_set_power_and_voltage()
mmc: sdhci: milbeaut: Use sdhci_set_power_and_voltage()
mmc: sdhci: arasan: Use sdhci_set_power_and_voltage()
mmc: sdhci: Introduce sdhci_set_power_and_bus_voltage()
mmc: vub300: Use scnprintf() for avoiding potential buffer overflow
dt-bindings: mmc: synopsys-dw-mshc: fix clock-freq-min-max in example
sdhci: tegra: Enable MMC_CAP_WAIT_WHILE_BUSY host capability
sdhci: tegra: Implement Tegra specific set_timeout callback
mmc: sdhci-omap: Add Support for Suspend/Resume
mmc: renesas_sdhi: simplify execute_tuning
mmc: renesas_sdhi: Use BITS_PER_LONG helper
...
-----BEGIN PGP SIGNATURE-----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=1m9l
-----END PGP SIGNATURE-----
Merge tag 'for-5.7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"A number of core changes that make things work better in general, code
is simpler and cleaner.
Core changes:
- per-inode file extent tree, for in memory tracking of contiguous
extent ranges to make sure i_size adjustments are accurate
- tree root structures are protected by reference counts, replacing
SRCU that did not cover some cases
- leak detector for tree root structures
- per-transaction pinned extent tracking
- buffer heads are replaced by bios for super block access
- speedup of extent back reference resolution, on an example test
scenario the runtime of send went down from a hour to minutes
- factor out locking scheme used for subvolume writer and NOCOW
exclusion, abstracted as DREW lock, double reader-writer exclusion
(allow either readers or writers)
- cleanup and abstract extent allocation policies, preparation for
zoned device support
- make reflink/clone_range work on inline extents
- add more cancellation point for relocation, improves long response
from 'balance cancel'
- add page migration callback for data pages
- switch to guid for uuids, with additional cleanups of the interface
- make ranged full fsyncs more efficient
- removal of obsolete ioctl flag BTRFS_SUBVOL_CREATE_ASYNC
- remove b-tree readahead from delayed refs paths, avoiding seek and
read unnecessary blocks
Features:
- v2 of ioctl to delete subvolumes, allowing to delete by id and more
future extensions
Fixes:
- fix qgroup rescan worker that could block umount
- fix crash during unmount due to race with delayed inode workers
- fix dellaloc flushing logic that could create unnecessary chunks
under heavy load
- fix missing file extent item for hole after ranged fsync
- several fixes in relocation error handling
Other:
- more documentation of relocation, device replace, space
reservations
- many random cleanups"
* tag 'for-5.7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (210 commits)
btrfs: fix missing semaphore unlock in btrfs_sync_file
btrfs: use nofs allocations for running delayed items
btrfs: sysfs: Use scnprintf() instead of snprintf()
btrfs: do not resolve backrefs for roots that are being deleted
btrfs: track reloc roots based on their commit root bytenr
btrfs: restart relocate_tree_blocks properly
btrfs: reloc: reorder reservation before root selection
btrfs: do not readahead in build_backref_tree
btrfs: do not use readahead for running delayed refs
btrfs: Remove async_transid from btrfs_mksubvol/create_subvol/create_snapshot
btrfs: Remove transid argument from btrfs_ioctl_snap_create_transid
btrfs: Remove BTRFS_SUBVOL_CREATE_ASYNC support
btrfs: kill the subvol_srcu
btrfs: make btrfs_cleanup_fs_roots use the radix tree lock
btrfs: don't take an extra root ref at allocation time
btrfs: hold a ref on the root on the dead roots list
btrfs: make inodes hold a ref on their roots
btrfs: move the root freeing stuff into btrfs_put_root
btrfs: move ino_cache_inode dropping out of btrfs_free_fs_root
btrfs: make the extent buffer leak check per fs info
...
Add an ioctl FS_IOC_GET_ENCRYPTION_NONCE which retrieves a file's
encryption nonce. This makes it easier to write automated tests which
verify that fscrypt is doing the encryption correctly.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCXoIg/RQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK2mZAQDjEil0Kf8AqZhjPuJSRrbifkzEPfu+
4EmERSyBZ5OCLgEA155kKnL5jiz7b5DRS9wGEw+drGpW8I7WfhTGv/XjoQs=
=2jU9
-----END PGP SIGNATURE-----
Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt
Pull fscrypt updates from Eric Biggers:
"Add an ioctl FS_IOC_GET_ENCRYPTION_NONCE which retrieves a file's
encryption nonce.
This makes it easier to write automated tests which verify that
fscrypt is doing the encryption correctly"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
ubifs: wire up FS_IOC_GET_ENCRYPTION_NONCE
f2fs: wire up FS_IOC_GET_ENCRYPTION_NONCE
ext4: wire up FS_IOC_GET_ENCRYPTION_NONCE
fscrypt: add FS_IOC_GET_ENCRYPTION_NONCE ioctl
* Add a capability for enabling secure guests under the Protected
Execution Framework ultravisor
* Various bug fixes and cleanups.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJegnq3AAoJEJ2a6ncsY3GfrU8IANpaxS7kTAsW3ZN0wJnP2PHq
i8j7ZPlCVLpkQWArrMyMimDLdiN9VP7lvaWonAWjG0HJrxlmMUUVnwVSMuPTXhWY
vSwEqhUXwSF5KKxN7DYkgxqaKFxkElJIubVE/AYJjH9zFpu9ca4vM5sCxnzWcvS3
hxPNe756nKhFH9xhrC/9NRUZWmDAiv75wvzq+5DRKbSVPJGJugchdIPBbi3Yrr7P
qxnUCPZdCxzXXU94bfQl038wrjSMR3S7b4FvekJ12go2FalujqzsL2lVtift4Rf0
jvu+RIINcmTiaQqclY332j7l24LZ6Pni456RygT5OwFxuYoxWKZRafN16JmaMCo=
=rpJL
-----END PGP SIGNATURE-----
Merge tag 'kvm-ppc-next-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into HEAD
KVM PPC update for 5.7
* Add a capability for enabling secure guests under the Protected
Execution Framework ultravisor
* Various bug fixes and cleanups.
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following patchset contains Netfilter/IPVS updates for net-next:
1) Add support to specify a stateful expression in set definitions,
this allows users to specify e.g. counters per set elements.
2) Flowtable software counter support.
3) Flowtable hardware offload counter support, from wenxu.
3) Parallelize flowtable hardware offload requests, from Paul Blakey.
This includes a patch to add one work entry per offload command.
4) Several patches to rework nf_queue refcount handling, from Florian
Westphal.
4) A few fixes for the flowtable tunnel offload: Fix crash if tunneling
information is missing and set up indirect flow block as TC_SETUP_FT,
patch from wenxu.
5) Stricter netlink attribute sanity check on filters, from Romain Bellan
and Florent Fourcot.
5) Annotations to make sparse happy, from Jules Irenge.
6) Improve icmp errors in debugging information, from Haishuang Yan.
7) Fix warning in IPVS icmp error debugging, from Haishuang Yan.
8) Fix endianess issue in tcp extension header, from Sergey Marinkevich.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Devices capable of offloading the kernel's datapath and perform
functions such as bridging and routing must also be able to send (trap)
specific packets to the kernel (i.e., the CPU) for processing.
For example, a device acting as a multicast-aware bridge must be able to
trap IGMP membership reports to the kernel for processing by the bridge
module.
In most cases, the underlying device is capable of handling packet rates
that are several orders of magnitude higher compared to those that can
be handled by the CPU.
Therefore, in order to prevent the underlying device from overwhelming
the CPU, devices usually include packet trap policers that are able to
police the trapped packets to rates that can be handled by the CPU.
This patch allows capable device drivers to register their supported
packet trap policers with devlink. User space can then tune the
parameters of these policer (currently, rate and burst size) and read
from the device the number of packets that were dropped by the policer,
if supported.
Subsequent patches in the series will allow device drivers to create
default binding between these policers and packet trap groups and allow
user space to change the binding.
v2:
* Add 'strict_start_type' in devlink policy
* Have device drivers provide max/min rate/burst size for each policer.
Use them to check validity of user provided parameters
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add new operation (LINK_UPDATE), which allows to replace active bpf_prog from
under given bpf_link. Currently this is only supported for bpf_cgroup_link,
but will be extended to other kinds of bpf_links in follow-up patches.
For bpf_cgroup_link, implemented functionality matches existing semantics for
direct bpf_prog attachment (including BPF_F_REPLACE flag). User can either
unconditionally set new bpf_prog regardless of which bpf_prog is currently
active under given bpf_link, or, optionally, can specify expected active
bpf_prog. If active bpf_prog doesn't match expected one, no changes are
performed, old bpf_link stays intact and attached, operation returns
a failure.
cgroup_bpf_replace() operation is resolving race between auto-detachment and
bpf_prog update in the same fashion as it's done for bpf_link detachment,
except in this case update has no way of succeeding because of target cgroup
marked as dying. So in this case error is returned.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200330030001.2312810-3-andriin@fb.com
Implement new sub-command to attach cgroup BPF programs and return FD-based
bpf_link back on success. bpf_link, once attached to cgroup, cannot be
replaced, except by owner having its FD. Cgroup bpf_link supports only
BPF_F_ALLOW_MULTI semantics. Both link-based and prog-based BPF_F_ALLOW_MULTI
attachments can be freely intermixed.
To prevent bpf_cgroup_link from keeping cgroup alive past the point when no
BPF program can be executed, implement auto-detachment of link. When
cgroup_bpf_release() is called, all attached bpf_links are forced to release
cgroup refcounts, but they leave bpf_link otherwise active and allocated, as
well as still owning underlying bpf_prog. This is because user-space might
still have FDs open and active, so bpf_link as a user-referenced object can't
be freed yet. Once last active FD is closed, bpf_link will be freed and
underlying bpf_prog refcount will be dropped. But cgroup refcount won't be
touched, because cgroup is released already.
The inherent race between bpf_cgroup_link release (from closing last FD) and
cgroup_bpf_release() is resolved by both operations taking cgroup_mutex. So
the only additional check required is when bpf_cgroup_link attempts to detach
itself from cgroup. At that time we need to check whether there is still
cgroup associated with that link. And if not, exit with success, because
bpf_cgroup_link was already successfully detached.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Roman Gushchin <guro@fb.com>
Link: https://lore.kernel.org/bpf/20200330030001.2312810-2-andriin@fb.com
Pull perf updates from Ingo Molnar:
"The main changes in this cycle were:
Kernel side changes:
- A couple of x86/cpu cleanups and changes were grandfathered in due
to patch dependencies. These clean up the set of CPU model/family
matching macros with a consistent namespace and C99 initializer
style.
- A bunch of updates to various low level PMU drivers:
* AMD Family 19h L3 uncore PMU
* Intel Tiger Lake uncore support
* misc fixes to LBR TOS sampling
- optprobe fixes
- perf/cgroup: optimize cgroup event sched-in processing
- misc cleanups and fixes
Tooling side changes are to:
- perf {annotate,expr,record,report,stat,test}
- perl scripting
- libapi, libperf and libtraceevent
- vendor events on Intel and S390, ARM cs-etm
- Intel PT updates
- Documentation changes and updates to core facilities
- misc cleanups, fixes and other enhancements"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (89 commits)
cpufreq/intel_pstate: Fix wrong macro conversion
x86/cpu: Cleanup the now unused CPU match macros
hwrng: via_rng: Convert to new X86 CPU match macros
crypto: Convert to new CPU match macros
ASoC: Intel: Convert to new X86 CPU match macros
powercap/intel_rapl: Convert to new X86 CPU match macros
PCI: intel-mid: Convert to new X86 CPU match macros
mmc: sdhci-acpi: Convert to new X86 CPU match macros
intel_idle: Convert to new X86 CPU match macros
extcon: axp288: Convert to new X86 CPU match macros
thermal: Convert to new X86 CPU match macros
hwmon: Convert to new X86 CPU match macros
platform/x86: Convert to new CPU match macros
EDAC: Convert to new X86 CPU match macros
cpufreq: Convert to new X86 CPU match macros
ACPI: Convert to new X86 CPU match macros
x86/platform: Convert to new CPU match macros
x86/kernel: Convert to new CPU match macros
x86/kvm: Convert to new CPU match macros
x86/perf/events: Convert to new CPU match macros
...
Here are the big set of USB and PHY driver patches for 5.7-rc1.
Nothing huge here, some new PHY drivers, loads of USB gadget fixes and
updates, xhci updates, usb-serial driver updates and new device ids, and
other minor things. Full details in the shortlog.
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXoHL9w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymz6wCcDwDTZouXj+0B37q+kwlCQQPyLukAn2CxKfrM
d+wScRHWoZutA8IdzqaU
=5+jn
-----END PGP SIGNATURE-----
Merge tag 'usb-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / PHY updates from Greg KH:
"Here are the big set of USB and PHY driver patches for 5.7-rc1.
Nothing huge here, some new PHY drivers, loads of USB gadget fixes and
updates, xhci updates, usb-serial driver updates and new device ids,
and other minor things. Full details in the shortlog.
All have been in linux-next for a while with no reported issues"
* tag 'usb-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (239 commits)
USB: cdc-acm: restore capability check order
usb: cdns3: make signed 1 bit bitfields unsigned
usb: gadget: fsl: remove unused variable 'driver_desc'
usb: gadget: f_fs: Fix use after free issue as part of queue failure
usb: typec: Correct the documentation for typec_cable_put()
USB: serial: io_edgeport: fix slab-out-of-bounds read in edge_interrupt_callback
USB: serial: option: add Wistron Neweb D19Q1
USB: serial: option: add BroadMobi BM806U
USB: serial: option: add support for ASKEY WWHC050
usb: core: Add ACPI support for USB interface devices
driver core: platform: Reimplement devm_platform_ioremap_resource
usb: dwc2: convert to devm_platform_get_and_ioremap_resource
usb: host: hisilicon: convert to devm_platform_get_and_ioremap_resource
usb: host: xhci-plat: convert to devm_platform_get_and_ioremap_resource
drivers: provide devm_platform_get_and_ioremap_resource()
phy: qcom-qusb2: Add new overriding tuning parameters in QUSB2 V2 PHY
phy: qcom-qusb2: Add support for overriding tuning parameters in QUSB2 V2 PHY
dt-bindings: phy: qcom-qusb2: Add support for overriding Phy tuning parameters
phy: qcom-qusb2: Add generic QUSB2 V2 PHY support
dt-bindings: phy: qcom,qusb2: Add compatibles for QUSB2 V2 phy and SC7180
...
Add support for TPROXY via a new bpf helper, bpf_sk_assign().
This helper requires the BPF program to discover the socket via a call
to bpf_sk*_lookup_*(), then pass this socket to the new helper. The
helper takes its own reference to the socket in addition to any existing
reference that may or may not currently be obtained for the duration of
BPF processing. For the destination socket to receive the traffic, the
traffic must be routed towards that socket via local route. The
simplest example route is below, but in practice you may want to route
traffic more narrowly (eg by CIDR):
$ ip route add local default dev lo
This patch avoids trying to introduce an extra bit into the skb->sk, as
that would require more invasive changes to all code interacting with
the socket to ensure that the bit is handled correctly, such as all
error-handling cases along the path from the helper in BPF through to
the orphan path in the input. Instead, we opt to use the destructor
variable to switch on the prefetch of the socket.
Signed-off-by: Joe Stringer <joe@wand.net.nz>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200329225342.16317-2-joe@wand.net.nz
-----BEGIN PGP SIGNATURE-----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=Ve8R
-----END PGP SIGNATURE-----
Merge tag 'media/v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- New sensor driver: imx219
- Support for some new pixelformats
- Support for Sun8i SoC
- Added more codecs to meson vdec driver
- Prepare for removing the legacy usbvision driver by moving it to
staging. This driver has issues and use legacy core APIs. If nobody
steps up to address those, it is time for its retirement.
- Several cleanups and improvements on drivers, with the addition of
new supported boards
* tag 'media/v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (236 commits)
media: venus: firmware: Ignore secure call error on first resume
media: mtk-vpu: load vpu firmware from the new location
media: i2c: video-i2c: fix build errors due to 'imply hwmon'
media: MAINTAINERS: add myself to co-maintain Hantro G1/G2 for i.MX8MQ
media: hantro: add initial i.MX8MQ support
media: dt-bindings: Document i.MX8MQ VPU bindings
media: vivid: fix incorrect PA assignment to HDMI outputs
media: hantro: Add linux-rockchip mailing list to MAINTAINERS
media: cedrus: h264: Fix 4K decoding on H6
media: siano: Use scnprintf() for avoiding potential buffer overflow
media: rc: Use scnprintf() for avoiding potential buffer overflow
media: allegro: create new struct for channel parameters
media: allegro: move mail definitions to separate file
media: allegro: pass buffers through firmware
media: allegro: verify source and destination buffer in VCU response
media: allegro: handle dependency of bitrate and bitrate_peak
media: allegro: read bitrate mode directly from control
media: allegro: make QP configurable
media: allegro: make frame rate configurable
media: allegro: skip filler data if possible
...
- allow TSYNC and USER_NOTIF together (Tycho Andersen)
- Add missing compat_ioctl for notify (Sven Schnelle)
-----BEGIN PGP SIGNATURE-----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=Ejyd
-----END PGP SIGNATURE-----
Merge tag 'seccomp-v5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp updates from Kees Cook:
"A couple of seccomp updates. They're both mostly bug fixes that I
wanted to have sit in linux-next for a while:
- allow TSYNC and USER_NOTIF together (Tycho Andersen)
- add missing compat_ioctl for notify (Sven Schnelle)"
* tag 'seccomp-v5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
seccomp: Add missing compat_ioctl for notify
seccomp: allow TSYNC and USER_NOTIF together
-----BEGIN PGP SIGNATURE-----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=bYLJ
-----END PGP SIGNATURE-----
Merge tag 'for-5.7/io_uring-2020-03-29' of git://git.kernel.dk/linux-block
Pull io_uring updates from Jens Axboe:
"Here are the io_uring changes for this merge window. Light on new
features this time around (just splice + buffer selection), lots of
cleanups, fixes, and improvements to existing support. In particular,
this contains:
- Cleanup fixed file update handling for stack fallback (Hillf)
- Re-work of how pollable async IO is handled, we no longer require
thread offload to handle that. Instead we rely using poll to drive
this, with task_work execution.
- In conjunction with the above, allow expendable buffer selection,
so that poll+recv (for example) no longer has to be a split
operation.
- Make sure we honor RLIMIT_FSIZE for buffered writes
- Add support for splice (Pavel)
- Linked work inheritance fixes and optimizations (Pavel)
- Async work fixes and cleanups (Pavel)
- Improve io-wq locking (Pavel)
- Hashed link write improvements (Pavel)
- SETUP_IOPOLL|SETUP_SQPOLL improvements (Xiaoguang)"
* tag 'for-5.7/io_uring-2020-03-29' of git://git.kernel.dk/linux-block: (54 commits)
io_uring: cleanup io_alloc_async_ctx()
io_uring: fix missing 'return' in comment
io-wq: handle hashed writes in chains
io-uring: drop 'free_pfile' in struct io_file_put
io-uring: drop completion when removing file
io_uring: Fix ->data corruption on re-enqueue
io-wq: close cancel gap for hashed linked work
io_uring: make spdxcheck.py happy
io_uring: honor original task RLIMIT_FSIZE
io-wq: hash dependent work
io-wq: split hashing and enqueueing
io-wq: don't resched if there is no work
io-wq: remove duplicated cancel code
io_uring: fix truncated async read/readv and write/writev retry
io_uring: dual license io_uring.h uapi header
io_uring: io_uring_enter(2) don't poll while SETUP_IOPOLL|SETUP_SQPOLL enabled
io_uring: Fix unused function warnings
io_uring: add end-of-bits marker and build time verify it
io_uring: provide means of removing buffers
io_uring: add IOSQE_BUFFER_SELECT support for IORING_OP_RECVMSG
...
On low memory system, run time dumps can consume too much memory. Add
administrator ability to disable auto dumps per reporter as part of the
error flow handle routine.
This attribute is not relevant while executing
DEVLINK_CMD_HEALTH_REPORTER_DUMP_GET.
By default, auto dump is activated for any reporter that has a dump method,
as part of the reporter registration to devlink.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It may be up to the driver (in case ANY HW stats is passed) to select
which type of HW stats he is going to use. Add an infrastructure to
expose this information to user.
$ tc filter add dev enp3s0np1 ingress proto ip handle 1 pref 1 flower dst_ip 192.168.1.1 action drop
$ tc -s filter show dev enp3s0np1 ingress
filter protocol ip pref 1 flower chain 0
filter protocol ip pref 1 flower chain 0 handle 0x1
eth_type ipv4
dst_ip 192.168.1.1
in_hw in_hw_count 2
action order 1: gact action drop
random type none pass val 0
index 1 ref 1 bind 1 installed 10 sec used 10 sec
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
used_hw_stats immediate <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement TSINFO_GET request to get timestamping information for a network
device. This is traditionally available via ETHTOOL_GET_TS_INFO ioctl
request.
Move part of ethtool_get_ts_info() into common.c so that ioctl and netlink
code use the same logic to get timestamping information from the device.
v3: use "TSINFO" rather than "TIMESTAMP", suggested by Richard Cochran
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add three string sets related to timestamping information:
ETH_SS_SOF_TIMESTAMPING: SOF_TIMESTAMPING_* flags
ETH_SS_TS_TX_TYPES: timestamping Tx types
ETH_SS_TS_RX_FILTERS: timestamping Rx filters
These will be used for TIMESTAMP_GET request.
v2: avoid compiler warning ("enumeration value not handled in switch")
in net_hwtstamp_validate()
v3: omit dash in Tx type names ("one-step-*" -> "onestep-*"), suggested by
Richard Cochran
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Send ETHTOOL_MSG_EEE_NTF notification whenever EEE settings of a network
device are modified using ETHTOOL_MSG_EEE_SET netlink message or
ETHTOOL_SEEE ioctl request.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds
Shaohua Li
Andrea Arcangeli
Alexander Duyck
Dmitry Torokhov
Ingo Molnar
Bjorn Helgaas
Kishon Vijay Abraham I
Brian Geffon
Tiwei Bie
Rajat Jain
Paolo Bonzini
David S. Miller
Ido Schimmel
Andrii Nakryiko
Joe Stringer
Eran Ben Elisha
Jiri Pirko
Michal Kubecek