Граф коммитов

2844 Коммитов

Автор SHA1 Сообщение Дата
Rafael J. Wysocki 0aba0ab891 Merge branch 'pm-sleep'
* pm-sleep:
  PM / wakeirq: check that wake IRQ is valid before accepting it
2015-11-20 01:22:33 +01:00
Dmitry Torokhov 6f9b36cd24 PM / wakeirq: check that wake IRQ is valid before accepting it
Check that IRQ number passed to dev_pm_set_wake_irq() and
dev_pm_set_dedicated_wake_irq() is valid (not negative) before
accepting it.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-16 23:10:20 +01:00
Linus Torvalds be23c9d20b More power management and ACPI updates for v4.4-rc1
- Support for the ACPI _CCA configuration object intended to tell
    the OS whether or not a bus master device supports hardware
    managed cache coherency and a new set of functions to allow
    drivers to check the cache coherency support for devices in a
    platform firmware interface agnostic way (Suravee Suthikulpanit,
    Jeremy Linton).
 
  - ACPI backlight quirks for ESPRIMO Mobile M9410 and Dell XPS L421X
    (Aaron Lu, Hans de Goede).
 
  - Fixes for the arm_big_little and s5pv210-cpufreq cpufreq drivers
    (Jon Medhurst, Nicolas Pitre).
 
  - kfree()-related fixup for the recently introduced CPPC cpufreq
    frontend (Markus Elfring).
 
  - intel_pstate fix reducing kernel log noise on systems where
    P-states are managed by hardware (Prarit Bhargava).
 
  - intel_pstate maintainers information update (Srinivas Pandruvada).
 
  - cpufreq core optimization related to the handling of delayed work
    items used by governors (Viresh Kumar).
 
  - Locking fixes and cleanups of the Operating Performance Points
    (OPP) framework (Viresh Kumar).
 
  - Generic power domains framework cleanups (Lina Iyer).
 
  - cpupower tool updates (Jacob Tanenbaum, Sriram Raghunathan,
    Thomas Renninger).
 
  - turbostat tool updates (Len Brown).
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJWQ96OAAoJEILEb/54YlRxyYYQALJ1HXu76SvYX1re2aawOw6Y
 WgzF3Ly7JX034E1VvA2xP6wgkWpBRBDcpnRDeltNA4dYXPBDei/eTcRZTLX12N3g
 AfFRGjGWTtLJfpNPecNMmUyF5xHjgDgMIQRabY+Is5NfP5STkPHJeqULnEpvTtx8
 bd0lnC5jc4vuZiPEh1xVb+ClYDqWS8YQPyFJVjV/BaIf8Qwe5+oRX36byMBaKc9D
 ZgmvmCk5n/HLQQ1uQsqe4xnhFLHN2rypt2BLvFrOtlnSz9VNNpQyB+OIW1mgCD4f
 LhpKIwjP8NhZNQUq8HFu7nDlm8ciQtWmeMPB5NdGQ+OESu7yfKAOzQ+3U6Gl2Gaf
 66zVGyV6SOJJwfDVJ3qKTtroWps9QV7ZClOJ+zJGgiujwU+tJ3pDQyZM9pa7CL3C
 s7ZAUsI6IigSBjD3nJVOyG4DO0a8KQFCIE1mDmyqId45Qz8xJoOrYP33/ZnDuOdo
 2OtL/emyfWsz9ixbHVfwIhb7EC6aoaUxQrhSWmNraaQS43YfioZR7h4we8gwenph
 X4E1KY4SdML+uFf2VKIcd45NM3IBprCxx5UgFAJdrqe8+otqPNF2AVosG4iqhg/b
 k4nxwuIvw2a8Fm77U9ytyXDYMItU/wIlAHMbnmgx+oTwRv6AbZ07MHkyfuQLYuhD
 tq5Y14qSiTS7prNacx98
 =XZiP
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-4.4-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull more power management and ACPI updates from Rafael Wysocki:
 "The only new feature in this batch is support for the ACPI _CCA device
  configuration object, which it a pre-requisite for future ACPI PCI
  support on ARM64, but should not affect the other architectures.

  The rest is fixes and cleanups, mostly in cpufreq (including
  intel_pstate), the Operating Performace Points (OPP) framework and
  tools (cpupower and turbostat).

  Specifics:

   - Support for the ACPI _CCA configuration object intended to tell the
     OS whether or not a bus master device supports hardware managed
     cache coherency and a new set of functions to allow drivers to
     check the cache coherency support for devices in a platform
     firmware interface agnostic way (Suravee Suthikulpanit, Jeremy
     Linton).

   - ACPI backlight quirks for ESPRIMO Mobile M9410 and Dell XPS L421X
     (Aaron Lu, Hans de Goede).

   - Fixes for the arm_big_little and s5pv210-cpufreq cpufreq drivers
     (Jon Medhurst, Nicolas Pitre).

   - kfree()-related fixup for the recently introduced CPPC cpufreq
     frontend (Markus Elfring).

   - intel_pstate fix reducing kernel log noise on systems where
     P-states are managed by hardware (Prarit Bhargava).

   - intel_pstate maintainers information update (Srinivas Pandruvada).

   - cpufreq core optimization related to the handling of delayed work
     items used by governors (Viresh Kumar).

   - Locking fixes and cleanups of the Operating Performance Points
     (OPP) framework (Viresh Kumar).

   - Generic power domains framework cleanups (Lina Iyer).

   - cpupower tool updates (Jacob Tanenbaum, Sriram Raghunathan, Thomas
     Renninger).

   - turbostat tool updates (Len Brown)"

* tag 'pm+acpi-4.4-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits)
  PCI: ACPI: Add support for PCI device DMA coherency
  PCI: OF: Move of_pci_dma_configure() to pci_dma_configure()
  of/pci: Fix pci_get_host_bridge_device leak
  device property: ACPI: Remove unused DMA APIs
  device property: ACPI: Make use of the new DMA Attribute APIs
  device property: Adding DMA Attribute APIs for Generic Devices
  ACPI: Adding DMA Attribute APIs for ACPI Device
  device property: Introducing enum dev_dma_attr
  ACPI: Honor ACPI _CCA attribute setting
  cpufreq: CPPC: Delete an unnecessary check before the function call kfree()
  PM / OPP: Add opp_rcu_lockdep_assert() to _find_device_opp()
  PM / OPP: Hold dev_opp_list_lock for writers
  PM / OPP: Protect updates to list_dev with mutex
  PM / OPP: Propagate error properly from dev_pm_opp_set_sharing_cpus()
  cpufreq: s5pv210-cpufreq: fix wrong do_div() usage
  MAINTAINERS: update for intel P-state driver
  Creating a common structure initialization pattern for struct option
  cpupower: Enable disabled Cstates if they are below max latency
  cpupower: Remove debug message when using cpupower idle-set -D switch
  cpupower: cpupower monitor reports uninitialized values for offline cpus
  ...
2015-11-12 11:50:33 -08:00
Rafael J. Wysocki f6f18a261c Merge branch 'pm-domains'
* pm-domains:
  PM / Domains: Allocate memory outside domain locks
  PM / Domains: Remove dev->driver check for runtime PM
2015-11-12 00:22:50 +01:00
Linus Torvalds baf51c4392 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux
Pull thermal updates from Zhang Rui:

 - Implement generic devfreq cooling mechanism through frequency
   reduction for devices using devfreq.  From Ørjan Eide and Javi
   Merino.

 - Introduce OMAP3 support on TI SoC thermal driver.  From Pavel Mack
   and Eduardo Valentin.

 - A bounch of small fixes on devfreq_cooling, Exynos, IMX, Armada, and
   Rockchip thermal drivers.

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (24 commits)
  thermal: exynos: Directly return 0 instead of using local ret variable
  thermal: exynos: Remove unneeded semicolon
  thermal: exynos: Use IS_ERR() because regulator cannot be NULL
  thermal: exynos: Fix first temperature read after registering sensor
  thermal: exynos: Fix unbalanced regulator disable on probe failure
  devfreq_cooling: return on allocation failure
  thermal: rockchip: support the sleep pinctrl state to avoid glitches in s2r
  dt-bindings: rockchip-thermal: Add the pinctrl states in this document
  thermal: devfreq_cooling: Make power a u64
  thermal: devfreq_cooling: use a thermal_cooling_device for register and unregister
  thermal: underflow bug in imx_set_trip_temp()
  thermal: armada: Fix possible overflow in the Armada 380 thermal sensor formula
  thermal: imx: register irq handler later in probe
  thermal: rockhip: fix setting thermal shutdown polarity
  thermal: rockchip: fix handling of invalid readings
  devfreq_cooling: add trace information
  thermal: Add devfreq cooling
  PM / OPP: get the voltage for all OPPs
  tools/thermal: tmon: use pkg-config also for CFLAGS
  linux/thermal.h: rename KELVIN_TO_CELSIUS to DECI_KELVIN_TO_CELSIUS
  ...
2015-11-11 09:03:01 -08:00
Linus Torvalds b44a3d2a85 ARM: SoC driver updates for v4.4
As we've enabled multiplatform kernels on ARM, and greatly done away with
 the contents under arch/arm/mach-*, there's still need for SoC-related
 drivers to go somewhere.
 
 Many of them go in through other driver trees, but we still have
 drivers/soc to hold some of the "doesn't fit anywhere" lowlevel code
 that might be shared between ARM and ARM64 (or just in general makes
 sense to not have under the architecture directory).
 
 This branch contains mostly such code:
 
 - Drivers for qualcomm SoCs for SMEM, SMD and SMD-RPM, used to communicate
   with power management blocks on these SoCs for use by clock, regulator and
   bus frequency drivers.
 - Allwinner Reduced Serial Bus driver, again used to communicate with PMICs.
 - Drivers for ARM's SCPI (System Control Processor). Not to be confused with
   PSCI (Power State Coordination Interface). SCPI is used to communicate with
   the assistant embedded cores doing power management, and we have yet to see
   how many of them will implement this for their hardware vs abstracting in
   other ways (or not at all like in the past).
 - To make confusion between SCPI and PSCI more likely, this release also
   includes an update of PSCI to interface version 1.0.
 - Rockchip support for power domains.
 - A driver to talk to the firmware on Raspberry Pi.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWQC+cAAoJEIwa5zzehBx3jEUP/0GpxfDVanEUkudVLLe7J0RH
 CNlRan107Cw6hXRUJo7elEsuCALjccXjc1CAH4+RnNpOAeBKW97n+WU7trTv+wUZ
 sQX4SkBPKFBlgwGF2qhsi5q74gms/BrgtCa4kNb9joOYso039tlfIOPzK80DMkOm
 TkyIJdUCgFJMjCQLhX6kGT0PDcrbIjb6aA2cF3FAVeaJA7uz8lNe/eHJr3oHxIEY
 CvC651yJ2mIHQUU4BJx/AJo+wXg3dRUXNCAtBjwLRPEAzduYZXYm1ZTVIby/1q9r
 dR2KDFEuibODXmXrDBzKNJwCu/TLJEwo/1oPaEIVfY91XLKfiWUhgVqa1o1I+d9U
 XoGPibCW461qFahjQW87MfInALpCOA7/RbTNjFp+MVyipCYvkaYq7KFiYEldgFDx
 z4Qx/J4hYc2TlDWrpNiUCZMfmhwi7y+Ib+tnenYTO1eyMuw0e9mfnVdjk5iU3Pvk
 Ye4qPqpYclJruyHbYi164878+1lLaW2NCUgC3rkBO/GWPAzp7d9iLWoZ3PuyD5i5
 PEjs668UcRdZYbI4rdrhGHL8Eq9Gnuc4Rthu7HxPOK+DG0XgP8r97PhM8aYGYVDO
 +yikBtjWRsA9fPj3rMKA3UsQ61DAeR9LmZ0XPGjWFMCjCG0JlUoIMaA+Uu0i8fr8
 95qxBVxbO7rhL39r1rhV
 =dm+I
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Olof Johansson:
 "As we've enabled multiplatform kernels on ARM, and greatly done away
  with the contents under arch/arm/mach-*, there's still need for
  SoC-related drivers to go somewhere.

  Many of them go in through other driver trees, but we still have
  drivers/soc to hold some of the "doesn't fit anywhere" lowlevel code
  that might be shared between ARM and ARM64 (or just in general makes
  sense to not have under the architecture directory).

  This branch contains mostly such code:

   - Drivers for qualcomm SoCs for SMEM, SMD and SMD-RPM, used to
     communicate with power management blocks on these SoCs for use by
     clock, regulator and bus frequency drivers.

   - Allwinner Reduced Serial Bus driver, again used to communicate with
     PMICs.

   - Drivers for ARM's SCPI (System Control Processor).  Not to be
     confused with PSCI (Power State Coordination Interface).  SCPI is
     used to communicate with the assistant embedded cores doing power
     management, and we have yet to see how many of them will implement
     this for their hardware vs abstracting in other ways (or not at all
     like in the past).

   - To make confusion between SCPI and PSCI more likely, this release
     also includes an update of PSCI to interface version 1.0.

   - Rockchip support for power domains.

   - A driver to talk to the firmware on Raspberry Pi"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (57 commits)
  soc: qcom: smd-rpm: Correct size of outgoing message
  bus: sunxi-rsb: Add driver for Allwinner Reduced Serial Bus
  bus: sunxi-rsb: Add Allwinner Reduced Serial Bus (RSB) controller bindings
  ARM: bcm2835: add mutual inclusion protection
  drivers: psci: make PSCI 1.0 functions initialization version dependent
  dt-bindings: Correct paths in Rockchip power domains binding document
  soc: rockchip: power-domain: don't try to print the clock name in error case
  soc: qcom/smem: add HWSPINLOCK dependency
  clk: berlin: add cpuclk
  ARM: berlin: dts: add CLKID_CPU for BG2Q
  ARM: bcm2835: Add the Raspberry Pi firmware driver
  soc: qcom: smem: Move RPM message ram out of smem DT node
  soc: qcom: smd-rpm: Correct the active vs sleep state flagging
  soc: qcom: smd: delete unneeded of_node_put
  firmware: qcom-scm: build for correct architecture level
  soc: qcom: smd: Correct SMEM items for upper channels
  qcom-scm: add missing prototype for qcom_scm_is_available()
  qcom-scm: fix endianess issue in __qcom_scm_is_call_available
  soc: qcom: smd: Reject send of too big packets
  soc: qcom: smd: Handle big endian CPUs
  ...
2015-11-10 15:00:03 -08:00
Linus Torvalds 264015f8a8 libnvdimm for 4.4:
1/ Add support for the ACPI 6.0 NFIT hot add mechanism to process
    updates of the NFIT at runtime.
 
 2/ Teach the coredump implementation how to filter out DAX mappings.
 
 3/ Introduce NUMA hints for allocations made by the pmem driver, and as
    a side effect all devm allocations now hint their NUMA node by
    default.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWQX2sAAoJEB7SkWpmfYgCWsEQAK7w/xM9zClVY/DDlFJxFtYq
 DZJ4faPj+E3FMTiJIEDzjtRgQvOFE+wmJtntYsCqKH/QZmpnyk9jeT/CbJzEEL2k
 WsAk+qHGLcVUlSb36blwN1RFzYqC+IDYThewJqUvxDbOwL1AbiibbX7gplzZHLhW
 +rj3ScVlSNOPRDgGGpkAeLNNsttuKvsGo7nB/JZopm0tV6g14rSK09wQbVhv6S6T
 Lu7VGYqnJlkteL9YlzRiROf9hW2ZFCMGJz1YZydPTy3aX3hGTBX4w2qvmsPwBIKP
 kW/gCNisVJGk1cZCk4joSJ8i/b3x3fE0zdZ5waivJ5jDvYbUUfyk0KtJkfw207Rl
 14yWitUC6aeVuCeOqXHgsjRi+1QVN9Pg7i49xgGiUN1igQiUYRTgQPWZxDv6Zo/s
 USrLFQBaRd+hJw+dl7A47lJ3mUF96tPCoQb4LCQ7DVsg5U4J2TvqXLH9Gek/CCZ4
 QsMkZDTQlZw4+JEDlzBgg/L7xVty8DadplTADMdjaRhFU3y8zKNJ85Ileokt7KVt
 IsBT4+S5HeZLvinZY95932DwAmFp1DtsyENd1BUXL06ddyvlQrFJ6NQaXji4fuDc
 EVQmMoTAqDujZFupMAux9vkUBDFj/hmaVD5F7j3+MWP87OCritw/IZn+2LgTaKoX
 EmttaYrDr2jJwIaGyw+H
 =a2/L
 -----END PGP SIGNATURE-----

Merge tag 'libnvdimm-for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm

Pull libnvdimm updates from Dan Williams:
 "Outside of the new ACPI-NFIT hot-add support this pull request is more
  notable for what it does not contain, than what it does.  There were a
  handful of development topics this cycle, dax get_user_pages, dax
  fsync, and raw block dax, that need more more iteration and will wait
  for 4.5.

  The patches to make devm and the pmem driver NUMA aware have been in
  -next for several weeks.  The hot-add support has not, but is
  contained to the NFIT driver and is passing unit tests.  The coredump
  support is straightforward and was looked over by Jeff.  All of it has
  received a 0day build success notification across 107 configs.

  Summary:

   - Add support for the ACPI 6.0 NFIT hot add mechanism to process
     updates of the NFIT at runtime.

   - Teach the coredump implementation how to filter out DAX mappings.

   - Introduce NUMA hints for allocations made by the pmem driver, and
     as a side effect all devm allocations now hint their NUMA node by
     default"

* tag 'libnvdimm-for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  coredump: add DAX filtering for FDPIC ELF coredumps
  coredump: add DAX filtering for ELF coredumps
  acpi: nfit: Add support for hot-add
  nfit: in acpi_nfit_init, break on a 0-length table
  pmem, memremap: convert to numa aware allocations
  devm_memremap_pages: use numa_mem_id
  devm: make allocations numa aware by default
  devm_memremap: convert to return ERR_PTR
  devm_memunmap: use devres_release()
  pmem: kill memremap_pmem()
  x86, mm: quiet arch_add_memory()
2015-11-10 12:07:22 -08:00
Dan Williams 85ce230051 Merge branch 'for-4.4/hotplug' into libnvdimm-for-next 2015-11-09 13:29:39 -05:00
Linus Torvalds 75021d2859 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial updates from Jiri Kosina:
 "Trivial stuff from trivial tree that can be trivially summed up as:

   - treewide drop of spurious unlikely() before IS_ERR() from Viresh
     Kumar

   - cosmetic fixes (that don't really affect basic functionality of the
     driver) for pktcdvd and bcache, from Julia Lawall and Petr Mladek

   - various comment / printk fixes and updates all over the place"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
  bcache: Really show state of work pending bit
  hwmon: applesmc: fix comment typos
  Kconfig: remove comment about scsi_wait_scan module
  class_find_device: fix reference to argument "match"
  debugfs: document that debugfs_remove*() accepts NULL and error values
  net: Drop unlikely before IS_ERR(_OR_NULL)
  mm: Drop unlikely before IS_ERR(_OR_NULL)
  fs: Drop unlikely before IS_ERR(_OR_NULL)
  drivers: net: Drop unlikely before IS_ERR(_OR_NULL)
  drivers: misc: Drop unlikely before IS_ERR(_OR_NULL)
  UBI: Update comments to reflect UBI_METAONLY flag
  pktcdvd: drop null test before destroy functions
2015-11-07 13:05:44 -08:00
Rafael J. Wysocki 1ede53f731 Merge branch 'pm-opp'
* pm-opp:
  PM / OPP: Add opp_rcu_lockdep_assert() to _find_device_opp()
  PM / OPP: Hold dev_opp_list_lock for writers
  PM / OPP: Protect updates to list_dev with mutex
  PM / OPP: Propagate error properly from dev_pm_opp_set_sharing_cpus()
  PM / OPP: Parse all power-supply related bindings together
  PM / OPP: Rename routines specific to old bindings with _v1
  PM / OPP: Improve print messages with pr_fmt
2015-11-07 01:30:40 +01:00
Rafael J. Wysocki f2115faaf0 Merge branch 'acpi-pci'
* acpi-pci:
  PCI: ACPI: Add support for PCI device DMA coherency
  PCI: OF: Move of_pci_dma_configure() to pci_dma_configure()
  of/pci: Fix pci_get_host_bridge_device leak
  device property: ACPI: Remove unused DMA APIs
  device property: ACPI: Make use of the new DMA Attribute APIs
  device property: Adding DMA Attribute APIs for Generic Devices
  ACPI: Adding DMA Attribute APIs for ACPI Device
  device property: Introducing enum dev_dma_attr
  ACPI: Honor ACPI _CCA attribute setting

Conflicts:
	drivers/crypto/ccp/ccp-platform.c
2015-11-07 01:30:10 +01:00
Suthikulpanit, Suravee ab3d527329 device property: ACPI: Remove unused DMA APIs
These DMA APIs are replaced with the newer versions, which return
the enum dev_dma_attr. So, we can safely remove them.

Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-07 01:29:22 +01:00
Suthikulpanit, Suravee e5e558644b device property: Adding DMA Attribute APIs for Generic Devices
The function device_dma_is_coherent() does not sufficiently
communicate device DMA attributes. Instead, this patch introduces
device_get_dma_attr(), which returns enum dev_dma_attr.
It replaces the acpi_check_dma(), which will be removed in
subsequent patch.

This also provides a convenient function, device_dma_supported(),
to check DMA support of the specified device.

Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-07 01:29:22 +01:00
Viresh Kumar 0597e81850 PM / OPP: Add opp_rcu_lockdep_assert() to _find_device_opp()
_find_device_opp() should be called with rcu-read lock or
dev_opp_list_lock held. Add the opp_rcu_lockdep_assert() check to make
sure caller have taken appropriate locks.

Fix comment over the routine as well.

Suggested-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-06 23:59:42 +01:00
Viresh Kumar 4a3a1353a8 PM / OPP: Hold dev_opp_list_lock for writers
Writers need to update OPP device and their list with dev_opp_list_lock
mutex held, which was missed at few places. Fix it.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: 4.3 <stable@vger.kernel.org> # 4.3
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-06 23:59:41 +01:00
Viresh Kumar 87b4115db0 PM / OPP: Protect updates to list_dev with mutex
dev_opp_list_lock is used everywhere to protect device and OPP lists,
but dev_pm_opp_set_sharing_cpus() is missed somehow. And instead we used
rcu-lock, which wouldn't help here as we are adding a new list_dev.

This also fixes a problem where we have called kzalloc(..., GFP_KERNEL)
from within rcu-lock, which isn't allowed as kzalloc can sleep when
called with GFP_KERNEL.

With CONFIG_DEBUG_ATOMIC_SLEEP set, we get following lockdep-splat:

include/linux/rcupdate.h:578 Illegal context switch in RCU read-side critical section!

other info that might help us debug this:

rcu_scheduler_active = 1, debug_locks = 0
5 locks held by swapper/0/1:
 #0:  (&dev->mutex){......}, at: [<c02f68f4>] __driver_attach+0x48/0x98
 #1:  (&dev->mutex){......}, at: [<c02f6904>] __driver_attach+0x58/0x98
 #2:  (cpu_hotplug.lock){++++++}, at: [<c00249d0>] get_online_cpus+0x40/0xb0
 #3:  (subsys mutex#5){+.+.+.}, at: [<c02f4f8c>] subsys_interface_register+0x44/0xdc
 #4:  (rcu_read_lock){......}, at: [<c0305c80>] dev_pm_opp_set_sharing_cpus+0x0/0x1e4

stack backtrace:
CPU: 1 PID: 1 Comm: swapper/0 Tainted: G        W       4.3.0-rc7-00047-g81f5932958a8 #59
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[<c0016874>] (unwind_backtrace) from [<c001355c>] (show_stack+0x10/0x14)
[<c001355c>] (show_stack) from [<c022553c>] (dump_stack+0x94/0xbc)
[<c022553c>] (dump_stack) from [<c004904c>] (___might_sleep+0x24c/0x298)
[<c004904c>] (___might_sleep) from [<c00f07e4>] (kmem_cache_alloc+0xe8/0x164)
[<c00f07e4>] (kmem_cache_alloc) from [<c0305354>] (_add_list_dev+0x30/0x58)
[<c0305354>] (_add_list_dev) from [<c0305d50>] (dev_pm_opp_set_sharing_cpus+0xd0/0x1e4)
[<c0305d50>] (dev_pm_opp_set_sharing_cpus) from [<c040eda4>] (cpufreq_init+0x4cc/0x62c)
[<c040eda4>] (cpufreq_init) from [<c040a964>] (cpufreq_online+0xbc/0x73c)
[<c040a964>] (cpufreq_online) from [<c02f4fe0>] (subsys_interface_register+0x98/0xdc)
[<c02f4fe0>] (subsys_interface_register) from [<c040a640>] (cpufreq_register_driver+0x110/0x17c)
[<c040a640>] (cpufreq_register_driver) from [<c040ef64>] (dt_cpufreq_probe+0x60/0x8c)
[<c040ef64>] (dt_cpufreq_probe) from [<c02f8084>] (platform_drv_probe+0x44/0xa4)
[<c02f8084>] (platform_drv_probe) from [<c02f67c0>] (driver_probe_device+0x208/0x2f4)
[<c02f67c0>] (driver_probe_device) from [<c02f6940>] (__driver_attach+0x94/0x98)
[<c02f6940>] (__driver_attach) from [<c02f4c1c>] (bus_for_each_dev+0x68/0x9c)

Reported-by: Michael Turquette <mturquette@baylibre.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: 4.3 <stable@vger.kernel.org> # 4.3
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-06 23:59:41 +01:00
Viresh Kumar 1794ec1f95 PM / OPP: Propagate error properly from dev_pm_opp_set_sharing_cpus()
We are returning 0 even in case of errors, fix it.

Fixes: 8d4d4e98ac ("PM / OPP: Add helpers for initializing CPU OPPs")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: 4.3 <stable@vger.kernel.org> # 4.3
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-06 23:59:41 +01:00
Linus Torvalds f66477a0ae The majority of the changes are driver updates and new device
support. The core framework is mostly unchanged this time
 around, with only a couple patches to expose a clk provider
 API and make getting clk parent names from DT more robust.
 
 Driver updates:
 
 - Support for clock controllers found on Broadcom Northstar
   SoCs and bcm2835 SoC
 
 - Support for Allwinner audio clocks
 
 - A few cleanup patches for Tegra drivers and support for the
   highest DFLL frequencies on Tegra124
 
 - Samsung exynos7 fixes and improvements
 
 - i.Mx SoC updates to add a few missing clocks and keep debug
   uart clocks on during kernel intialization
 
 - Some mediatek cleanups and support for more subsystem clocks
 
 - Support for msm8916 gpu/audio clocks and qcom's GDSC power domain
   controllers
 
 - A new driver for the Silabs si514 clock chip
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABCAAGBQJWOov3AAoJENidgRMleOc9qF4P/Rj/Gw/E0dyjE1fE3j4V9iNJ
 YJere7Zzr1ueG2THfMk335JGN7hQQkP8ofe8QzS4Opbo0m/Y+RxWo++1PDLUytxv
 wu79HGFKNCEXqqWvIfm30cgoZ59sjjHpVaZHgDDL17YEG2GxWlzstjKXp/E3EDer
 UOW75sKQ5E9AoWiqySmzZSUunWrgwOBoCA6OR9JhBRa5rzXisu1inIOw8K+zw1q1
 WtOekpricaodajIsI+2dFTtAokBOqRsrhcBptYI9ZpZtqVMc+wVWjHqEQHzEkLC0
 q4VMVUspt+/dnI3zjM5KkOe553A8wXqehuIek6y0osdwDtCgwAcU/dL9e27MmqvE
 0jbJ+vu1UlHkFsSaxYxEQKvQONqVEAPOFomW+9qabF/pMNiXloBVEGCKpV8R8HtB
 NyJvOcdTFouESGvFntvn6MV5GHFveFiRWRKacq+9QVvitEsu6Xg7mP4kTh0hf1C6
 zb1o3s1Z1iGnWcEjAPTNBHEte17mkR9magxkoyB4GzaNxempWHyZ+MXLEiTgQyjA
 MMTROM1Lg4aftPaASBtMvL//YHSXAd0P924I2KKTTf1X+yP60XLLSVrdMvPgTXy1
 bV1L7Vszo1BMVYbFD9YG+pGnXFzia2NJafQoLgw+Cm3Mo2ApqjCdtj/UADFT+/Bz
 X0ZKA7w9nUM+rD2EMSi1
 =K6iN
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus-20151104' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "The majority of the changes are driver updates and new device support.
  The core framework is mostly unchanged this time around, with only a
  couple patches to expose a clk provider API and make getting clk
  parent names from DT more robust.

  Driver updates:

   - Support for clock controllers found on Broadcom Northstar SoCs and
     bcm2835 SoC

   - Support for Allwinner audio clocks

   - A few cleanup patches for Tegra drivers and support for the highest
     DFLL frequencies on Tegra124

   - Samsung exynos7 fixes and improvements

   - i.Mx SoC updates to add a few missing clocks and keep debug uart
     clocks on during kernel intialization

   - Some mediatek cleanups and support for more subsystem clocks

   - Support for msm8916 gpu/audio clocks and qcom's GDSC power domain
     controllers

   - A new driver for the Silabs si514 clock chip"

* tag 'clk-for-linus-20151104' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (143 commits)
  clk: qcom: msm8960: Fix dsi1/2 halt bits
  clk: lpc18xx-cgu: fix potential system hang when disabling unused clocks
  clk: lpc18xx-ccu: fix potential system hang when disabling unused clocks
  clk: Add clk_hw_is_enabled() for use by clk providers
  clk: Add stubs for of_clk_*() APIs when CONFIG_OF=n
  clk: versatile-icst: fix memory leak
  clk: Remove clk_{register,unregister}_multiplier()
  clk: iproc: define Broadcom NS2 iProc clock binding
  clk: iproc: define Broadcom NSP iProc clock binding
  clk: ns2: add clock support for Broadcom Northstar 2 SoC
  clk: iproc: Separate status and control variables
  clk: iproc: Split off dig_filter
  clk: iproc: Add PLL base write function
  clk: nsp: add clock support for Broadcom Northstar Plus SoC
  clk: iproc: Add PWRCTRL support
  clk: cygnus: Convert all macros to all caps
  ARM: cygnus: fix link failures when CONFIG_COMMON_CLK_IPROC is disabled
  clk: imx31: add missing of_node_put
  clk: imx27: add missing of_node_put
  clk: si5351: add missing of_node_put
  ...
2015-11-05 12:59:36 -08:00
Linus Torvalds e880e87488 driver core update for 4.4-rc1
Here's the "big" driver core updates for 4.4-rc1.  Primarily a bunch of
 debugfs updates, with a smattering of minor driver core fixes and
 updates as well.
 
 All have been in linux-next for a long time.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlY6ePQACgkQMUfUDdst+ymNTgCgpP0CZw57GpwF/Hp2L/lMkVeo
 Kx8AoKhEi4iqD5fdCQS9qTfomB+2/M6g
 =g7ZO
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here's the "big" driver core updates for 4.4-rc1.  Primarily a bunch
  of debugfs updates, with a smattering of minor driver core fixes and
  updates as well.

  All have been in linux-next for a long time"

* tag 'driver-core-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  debugfs: Add debugfs_create_ulong()
  of: to support binding numa node to specified device in devicetree
  debugfs: Add read-only/write-only bool file ops
  debugfs: Add read-only/write-only size_t file ops
  debugfs: Add read-only/write-only x64 file ops
  debugfs: Consolidate file mode checks in debugfs_create_*()
  Revert "mm: Check if section present during memory block (un)registering"
  driver-core: platform: Provide helpers for multi-driver modules
  mm: Check if section present during memory block (un)registering
  devres: fix a for loop bounds check
  CMA: fix CONFIG_CMA_SIZE_MBYTES overflow in 64bit
  base/platform: assert that dev_pm_domain callbacks are called unconditionally
  sysfs: correctly handle short reads on PREALLOC attrs.
  base: soc: siplify ida usage
  kobject: move EXPORT_SYMBOL() macros next to corresponding definitions
  kobject: explain what kobject's sd field is
  debugfs: document that debugfs_remove*() accepts NULL and error values
  debugfs: Pass bool pointer to debugfs_create_bool()
  ACPI / EC: Fix broken 64bit big-endian users of 'global_lock'
2015-11-04 21:50:37 -08:00
Linus Torvalds 0d51ce9ca1 Power management and ACPI updates for v4.4-rc1
- ACPICA update to upstream revision 20150930 (Bob Moore, Lv Zheng).
 
    The most significant change is to allow the AML debugger to be
    built into the kernel.  On top of that there is an update related
    to the NFIT table (the ACPI persistent memory interface)
    and a few fixes and cleanups.
 
  - ACPI CPPC2 (Collaborative Processor Performance Control v2)
    support along with a cpufreq frontend (Ashwin Chaugule).
 
    This can only be enabled on ARM64 at this point.
 
  - New ACPI infrastructure for the early probing of IRQ chips and
    clock sources (Marc Zyngier).
 
  - Support for a new hierarchical properties extension of the ACPI
    _DSD (Device Specific Data) device configuration object allowing
    the kernel to handle hierarchical properties (provided by the
    platform firmware this way) automatically and make them available
    to device drivers via the generic device properties interface
    (Rafael Wysocki).
 
  - Generic device properties API extension to obtain an index of
    certain string value in an array of strings, along the lines of
    of_property_match_string(), but working for all of the supported
    firmware node types, and support for the "dma-names" device
    property based on it (Mika Westerberg).
 
  - ACPI core fix to parse the MADT (Multiple APIC Description Table)
    entries in the order expected by platform firmware (and mandated
    by the specification) to avoid confusion on systems with more than
    255 logical CPUs (Lukasz Anaczkowski).
 
  - Consolidation of the ACPI-based handling of PCI host bridges
    on x86 and ia64 (Jiang Liu).
 
  - ACPI core fixes to ensure that the correct IRQ number is used to
    represent the SCI (System Control Interrupt) in the cases when
    it has been re-mapped (Chen Yu).
 
  - New ACPI backlight quirk for Lenovo IdeaPad S405 (Hans de Goede).
 
  - ACPI EC driver fixes (Lv Zheng).
 
  - Assorted ACPI fixes and cleanups (Dan Carpenter, Insu Yun, Jiri
    Kosina, Rami Rosen, Rasmus Villemoes).
 
  - New mechanism in the PM core allowing drivers to check if the
    platform firmware is going to be involved in the upcoming system
    suspend or if it has been involved in the suspend the system is
    resuming from at the moment (Rafael Wysocki).
 
    This should allow drivers to optimize their suspend/resume
    handling in some cases and the changes include a couple of users
    of it (the i8042 input driver, PCI PM).
 
  - PCI PM fix to prevent runtime-suspended devices with PME enabled
    from being resumed during system suspend even if they aren't
    configured to wake up the system from sleep (Rafael Wysocki).
 
  - New mechanism to report the number of a wakeup IRQ that woke up
    the system from sleep last time (Alexandra Yates).
 
  - Removal of unused interfaces from the generic power domains
    framework and fixes related to latency measurements in that
    code (Ulf Hansson, Daniel Lezcano).
 
  - cpufreq core sysfs interface rework to make it handle CPUs that
    share performance scaling settings (represented by a common
    cpufreq policy object) more symmetrically (Viresh Kumar).
 
    This should help to simplify the CPU offline/online handling among
    other things.
 
  - cpufreq core fixes and cleanups (Viresh Kumar).
 
  - intel_pstate fixes related to the Turbo Activation Ratio (TAR)
    mechanism on client platforms which causes the turbo P-states
    range to vary depending on platform firmware settings (Srinivas
    Pandruvada).
 
  - intel_pstate sysfs interface fix (Prarit Bhargava).
 
  - Assorted cpufreq driver (imx, tegra20, powernv, integrator) fixes
    and cleanups (Bai Ping, Bartlomiej Zolnierkiewicz, Shilpasri G
    Bhat, Luis de Bethencourt).
 
  - cpuidle mvebu driver cleanups (Russell King).
 
  - OPP (Operating Performance Points) framework code reorganization
    to make it more maintainable (Viresh Kumar).
 
  - Intel Broxton support for the RAPL (Running Average Power Limits)
    power capping driver (Amy Wiles).
 
  - Assorted power management code fixes and cleanups (Dan Carpenter,
    Geert Uytterhoeven, Geliang Tang, Luis de Bethencourt, Rasmus
    Villemoes).
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJWOC9oAAoJEILEb/54YlRx/c8P/joflwoFsISwJccG62YTQMuc
 bMQKM4Kw0vl5La8+pkLpe5t6+mW7l81UFtYF6Dzd8LOKlD9sszD34z1lHmCeT/oR
 wn0uZpHagRyLMUfoyiEtlU/VRU6WQNNtS3EgjwUi7xgFz9Q0pjcCZ9OQ6vKov1j5
 +6j40ODif5sgo+2vl+rztJiV0SIMkYdkgNqgfN1FE9bdLA2Zkk+PxxJbtGQORuDu
 O/K+XhQT2xWquVWi/1p+VtQxs5glBS1oKm0kogV5bElCvNTRNIVABUNcjogITQwo
 QSAKgoCKIoaIl5jtDT6u5dc0y67q/dMtqOY9fOCcOz1Z7jbWQzR8D7mpFWIsJUPK
 K2LClI3t85ynpN6Jref246A6+C9nwB8JMAiAR11oBw7WbBlkd6tbRgcT5B+iz8UE
 FuCCif7pha/Fs+Jt1YRazscIqteQ2bAhhxikuIPMfw2M6M67MNfVNeKA1bAoSM34
 dH7JsilblitvV7shrwJHwXPXCOF2jEPoK8I4/q2+TR5qUxEpRJjelQxXGSaQScMZ
 iNnjeTgv8H8q+rY5Yjzsl4pxP0Fvf7IuqkptWOJbgepg4cQc9pS87wOpY3uEeQzr
 H7ruaQJFCnLO4aXbPNClsiJARhrBk+qMlsh4vBEyCJ2T0ucb+nIUcN4BTi8t85yl
 X97BfHHUiDoUrnIsNids
 =1gaH
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-4.4-rc1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management and ACPI updates from Rafael Wysocki:
 "Quite a new features are included this time.

  First off, the Collaborative Processor Performance Control interface
  (version 2) defined by ACPI will now be supported on ARM64 along with
  a cpufreq frontend for CPU performance scaling.

  Second, ACPI gets a new infrastructure for the early probing of IRQ
  chips and clock sources (along the lines of the existing similar
  mechanism for DT).

  Next, the ACPI core and the generic device properties API will now
  support a recently introduced hierarchical properties extension of the
  _DSD (Device Specific Data) ACPI device configuration object.  If the
  ACPI platform firmware uses that extension to organize device
  properties in a hierarchical way, the kernel will automatically handle
  it and make those properties available to device drivers via the
  generic device properties API.

  It also will be possible to build the ACPICA's AML interpreter
  debugger into the kernel now and use that to diagnose AML-related
  problems more efficiently.  In the future, this should make it
  possible to single-step AML execution and do similar things.
  Interesting stuff, although somewhat experimental at this point.

  Finally, the PM core gets a new mechanism that can be used by device
  drivers to distinguish between suspend-to-RAM (based on platform
  firmware support) and suspend-to-idle (or other variants of system
  suspend the platform firmware is not involved in) and possibly
  optimize their device suspend/resume handling accordingly.

  In addition to that, some existing features are re-organized quite
  substantially.

  First, the ACPI-based handling of PCI host bridges on x86 and ia64 is
  unified and the common code goes into the ACPI core (so as to reduce
  code duplication and eliminate non-essential differences between the
  two architectures in that area).

  Second, the Operating Performance Points (OPP) framework is
  reorganized to make the code easier to find and follow.

  Next, the cpufreq core's sysfs interface is reorganized to get rid of
  the "primary CPU" concept for configurations in which the same
  performance scaling settings are shared between multiple CPUs.

  Finally, some interfaces that aren't necessary any more are dropped
  from the generic power domains framework.

  On top of the above we have some minor extensions, cleanups and bug
  fixes in multiple places, as usual.

  Specifics:

   - ACPICA update to upstream revision 20150930 (Bob Moore, Lv Zheng).

     The most significant change is to allow the AML debugger to be
     built into the kernel.  On top of that there is an update related
     to the NFIT table (the ACPI persistent memory interface) and a few
     fixes and cleanups.

   - ACPI CPPC2 (Collaborative Processor Performance Control v2) support
     along with a cpufreq frontend (Ashwin Chaugule).

     This can only be enabled on ARM64 at this point.

   - New ACPI infrastructure for the early probing of IRQ chips and
     clock sources (Marc Zyngier).

   - Support for a new hierarchical properties extension of the ACPI
     _DSD (Device Specific Data) device configuration object allowing
     the kernel to handle hierarchical properties (provided by the
     platform firmware this way) automatically and make them available
     to device drivers via the generic device properties interface
     (Rafael Wysocki).

   - Generic device properties API extension to obtain an index of
     certain string value in an array of strings, along the lines of
     of_property_match_string(), but working for all of the supported
     firmware node types, and support for the "dma-names" device
     property based on it (Mika Westerberg).

   - ACPI core fix to parse the MADT (Multiple APIC Description Table)
     entries in the order expected by platform firmware (and mandated by
     the specification) to avoid confusion on systems with more than 255
     logical CPUs (Lukasz Anaczkowski).

   - Consolidation of the ACPI-based handling of PCI host bridges on x86
     and ia64 (Jiang Liu).

   - ACPI core fixes to ensure that the correct IRQ number is used to
     represent the SCI (System Control Interrupt) in the cases when it
     has been re-mapped (Chen Yu).

   - New ACPI backlight quirk for Lenovo IdeaPad S405 (Hans de Goede).

   - ACPI EC driver fixes (Lv Zheng).

   - Assorted ACPI fixes and cleanups (Dan Carpenter, Insu Yun, Jiri
     Kosina, Rami Rosen, Rasmus Villemoes).

   - New mechanism in the PM core allowing drivers to check if the
     platform firmware is going to be involved in the upcoming system
     suspend or if it has been involved in the suspend the system is
     resuming from at the moment (Rafael Wysocki).

     This should allow drivers to optimize their suspend/resume handling
     in some cases and the changes include a couple of users of it (the
     i8042 input driver, PCI PM).

   - PCI PM fix to prevent runtime-suspended devices with PME enabled
     from being resumed during system suspend even if they aren't
     configured to wake up the system from sleep (Rafael Wysocki).

   - New mechanism to report the number of a wakeup IRQ that woke up the
     system from sleep last time (Alexandra Yates).

   - Removal of unused interfaces from the generic power domains
     framework and fixes related to latency measurements in that code
     (Ulf Hansson, Daniel Lezcano).

   - cpufreq core sysfs interface rework to make it handle CPUs that
     share performance scaling settings (represented by a common cpufreq
     policy object) more symmetrically (Viresh Kumar).

     This should help to simplify the CPU offline/online handling among
     other things.

   - cpufreq core fixes and cleanups (Viresh Kumar).

   - intel_pstate fixes related to the Turbo Activation Ratio (TAR)
     mechanism on client platforms which causes the turbo P-states range
     to vary depending on platform firmware settings (Srinivas
     Pandruvada).

   - intel_pstate sysfs interface fix (Prarit Bhargava).

   - Assorted cpufreq driver (imx, tegra20, powernv, integrator) fixes
     and cleanups (Bai Ping, Bartlomiej Zolnierkiewicz, Shilpasri G
     Bhat, Luis de Bethencourt).

   - cpuidle mvebu driver cleanups (Russell King).

   - OPP (Operating Performance Points) framework code reorganization to
     make it more maintainable (Viresh Kumar).

   - Intel Broxton support for the RAPL (Running Average Power Limits)
     power capping driver (Amy Wiles).

   - Assorted power management code fixes and cleanups (Dan Carpenter,
     Geert Uytterhoeven, Geliang Tang, Luis de Bethencourt, Rasmus
     Villemoes)"

* tag 'pm+acpi-4.4-rc1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (108 commits)
  cpufreq: postfix policy directory with the first CPU in related_cpus
  cpufreq: create cpu/cpufreq/policyX directories
  cpufreq: remove cpufreq_sysfs_{create|remove}_file()
  cpufreq: create cpu/cpufreq at boot time
  cpufreq: Use cpumask_copy instead of cpumask_or to copy a mask
  cpufreq: ondemand: Drop unnecessary locks from update_sampling_rate()
  PM / Domains: Merge measurements for PM QoS device latencies
  PM / Domains: Don't measure ->start|stop() latency in system PM callbacks
  PM / clk: Fix broken build due to non-matching code and header #ifdefs
  ACPI / Documentation: add copy_dsdt to ACPI format options
  ACPI / sysfs: correctly check failing memory allocation
  ACPI / video: Add a quirk to force native backlight on Lenovo IdeaPad S405
  ACPI / CPPC: Fix potential memory leak
  ACPI / CPPC: signedness bug in register_pcc_channel()
  ACPI / PAD: power_saving_thread() is not freezable
  ACPI / PM: Fix incorrect wakeup IRQ setting during suspend-to-idle
  ACPI: Using correct irq when waiting for events
  ACPI: Use correct IRQ when uninstalling ACPI interrupt handler
  cpuidle: mvebu: disable the bind/unbind attributes and use builtin_platform_driver
  cpuidle: mvebu: clean up multiple platform drivers
  ...
2015-11-04 18:10:13 -08:00
Linus Torvalds 6aa2fdb87c Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
 "The irq departement delivers:

   - Rework the irqdomain core infrastructure to accomodate ACPI based
     systems.  This is required to support ARM64 without creating
     artificial device tree nodes.

   - Sanitize the ACPI based ARM GIC initialization by making use of the
     new firmware independent irqdomain core

   - Further improvements to the generic MSI management

   - Generalize the irq migration on CPU hotplug

   - Improvements to the threaded interrupt infrastructure

   - Allow the migration of "chained" low level interrupt handlers

   - Allow optional force masking of interrupts in disable_irq[_nosysnc]

   - Support for two new interrupt chips - Sigh!

   - A larger set of errata fixes for ARM gicv3

   - The usual pile of fixes, updates, improvements and cleanups all
     over the place"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (71 commits)
  Document that IRQ_NONE should be returned when IRQ not actually handled
  PCI/MSI: Allow the MSI domain to be device-specific
  PCI: Add per-device MSI domain hook
  of/irq: Use the msi-map property to provide device-specific MSI domain
  of/irq: Split of_msi_map_rid to reuse msi-map lookup
  irqchip/gic-v3-its: Parse new version of msi-parent property
  PCI/MSI: Use of_msi_get_domain instead of open-coded "msi-parent" parsing
  of/irq: Use of_msi_get_domain instead of open-coded "msi-parent" parsing
  of/irq: Add support code for multi-parent version of "msi-parent"
  irqchip/gic-v3-its: Add handling of PCI requester id.
  PCI/MSI: Add helper function pci_msi_domain_get_msi_rid().
  of/irq: Add new function of_msi_map_rid()
  Docs: dt: Add PCI MSI map bindings
  irqchip/gic-v2m: Add support for multiple MSI frames
  irqchip/gic-v3: Fix translation of LPIs after conversion to irq_fwspec
  irqchip/mxs: Add Alphascale ASM9260 support
  irqchip/mxs: Prepare driver for hardware with different offsets
  irqchip/mxs: Panic if ioremap or domain creation fails
  irqdomain: Documentation updates
  irqdomain/msi: Use fwnode instead of of_node
  ...
2015-11-03 14:40:01 -08:00
Zhang Rui c75960aa7a Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal into thermal-soc 2015-11-03 15:24:40 +08:00
Linus Torvalds 5062ecdb66 regmap: Updates for v4.4
Quite a few new features for regmap this time, mostly expanding things
 around the edges of the existing functionality to cover more devices
 rather than thinsg with wide applicability:
 
  - Support for offload of the update_bits() operation to hardware where
    devices implement bit level access.
  - Support for a few extra operations that need scratch buffers on
    fast_io devices where we can't sleep.
  - Expanded the feature set of regmap_irq to cope with some extra
    register layouts.
  - Cleanups to the debugfs code.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJWN6usAAoJECTWi3JdVIfQT7cH/1sNJlpt8s2pu/29LtBN0oMH
 ZPPT8p46Xph7lbVMbMWZfgcobtISKMYo8dGDEeIYR1c1DZObErJSDxj5I/g5PxUv
 FuJ1kVeJ0L0GJE78sB69LQQUAYXfmbtOnmivok/huNID+wpZbTE7uZjAby4tffuk
 Mom2TLSnrm63j/zDnsi4VBAB9w1pQCIp+UiJ8LR8PCglcSHJ/eZLrh53F6BzXRU8
 9QseD5YQCh4d3go6QZhVNX8iJEby9ehmtCnzN8zEfpXKpc2T1pCoHEH/BnKnxd16
 i35A4RjW0GZfilS1815prjDhHJSbrQiqzyIh7Wua+zll7kCx6K/oLdjUfTIK9L0=
 =A8Lm
 -----END PGP SIGNATURE-----

Merge tag 'regmap-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap

Pull regmap updates from Mark Brown:
 "Quite a few new features for regmap this time, mostly expanding things
  around the edges of the existing functionality to cover more devices
  rather than thinsg with wide applicability:

   - Support for offload of the update_bits() operation to hardware
     where devices implement bit level access.
   - Support for a few extra operations that need scratch buffers on
     fast_io devices where we can't sleep.
   - Expanded the feature set of regmap_irq to cope with some extra
     register layouts.
   - Cleanups to the debugfs code"

* tag 'regmap-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: Allow installing custom reg_update_bits function
  regmap: debugfs: simplify regmap_reg_ranges_read_file() slightly
  regmap: debugfs: use memcpy instead of snprintf
  regmap: debugfs: use snprintf return value in regmap_reg_ranges_read_file()
  regmap: Add generic macro to define regmap_irq
  regmap: debugfs: Remove scratch buffer for register length calculation
  regmap: irq: add ack_invert flag for chips using cleared bits as ack
  regmap: irq: add support for chips who have separate unmask registers
  regmap: Allocate buffers with GFP_ATOMIC when fast_io == true
2015-11-02 16:16:24 -08:00
Linus Torvalds bc9d8c20ff This is the big bulk of pin control changes for the
v4.4 kernel development cycle:
 
 Infrastructure:
 - Doug Anderson wrote a patch adding an "init" state
   different from the "default" state for pin control
   state handling in the core framework. This is applied
   before the driver's probe() call if defined and takes
   precedence over "default". If both are defined, "init"
   will be applied *before* probe() and "default" will be
   applied *after* probe().
 
 Significant subdriver improvements:
 - SH PFC is switched to getting GPIO ranges from the
   device tree ranges property on DT platforms.
 - Got rid of CONFIG_ARCH_SHMOBILE_LEGACY, we are all
   modernized.
 - Got rid of SH PFC hardcoded IRQ numbers.
 - Allwinner sunxi external interrupt through the "r"
   controller.
 - Moved the Cygnus driver to use DT-provided GPIO
   ranges.
 
 New drivers:
 - Atmel PIO4 pin controller for the SAMA4D2 family
 
 New subdrivers:
 - Rockchip RK3036 subdriver
 - Renesas SH PFC R8A7795 subdriver
 - Allwinner sunxi A83T PIO subdriver
 - Freescale i.MX7d iomux lpsr subdriver
 - Marvell Berlin BG4CT subdriver
 - SiRF Atlas 7 step B SoC subdriver
 - Intel Broxton SoC subdriver
 
 Apart from this, the usual slew if syntactic and semantic
 fixes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWNzaFAAoJEEEQszewGV1zth0QAIWBhrEFeZNw3yewSwtawBin
 Q+5hxxld7YWeYykK/phRw+nru+tRmRKd72uZbiA/OHDFmXdlF7ecQC+D2ByAT/a3
 /d61BPtuT0tzmiZTmYSdbivBZzXjs9UrbEsGe2MXgf2WJuzZU/2EiQwCxklDfiX6
 BWa0lcL9+ikVRh53xGoEps/5KVOkXSlPDq/twXp6Trd6B1k+opPqKHf7UNxb0BvK
 0QoNPDYBTb93Z9iIItQdAGNCD/JMllywpUcqK+tPdQoRdrqlAcdRlUdXI7rdtvGw
 O3O2/MTBrGI7pxCNxBPGi9+niM6qtLrwKeQx8iIe0ieTIrUCCdg3vftUXctxXHkC
 +GxKLQGO/aMqW/4O8J+voAOD5HiGc+heoJsQEWoysoooWos/IxVJiiCKy5RNTk7g
 ECbzQvu7kbwTnwNXbxAc5ocdwhQ6HpJe2X2S52zTpDscfK8HcOow0hmf9m2EI4hV
 ikf47WJQIN9zunJloiJ3oZveK0Eytx1hH/47gcFRwr0KV/DK0KngvxnPWlB2nzlc
 pggkVnkHXczCyqBfDhZomILnTK2aDt6RKUZhz4w1s8ezK2EDn8Vvt3Qm7wOIeWvR
 xiY7XVoO+AYOywuFsbNxkt28Y8h5yQxu/AV6/rYSn+NYCZcLxKbcrVEiY2N6ecCA
 x74epIdnjA8F7S3Xp14q
 =0t3B
 -----END PGP SIGNATURE-----

Merge tag 'pinctrl-v4.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "This is the big bulk of pin control changes for the v4.4 kernel
  development cycle.  Development pace is high in pin control again this
  merge window.  28 contributors, 83 patches.

  It hits a few sites outside the pin control subsystem:

   - Device tree bindings in Documentation (as usual)
   - MAINTAINERS
   - drivers/base/* for the "init" state handling by Doug Anderson.
     This has been ACKed by Greg.
   - drivers/usb/renesas_usbhs/rcar2.c, for a dependent Renesas change
     in the USB subsystem.  This has been ACKed by both Greg and Felipe.
   - arch/arm/boot/dts/sama5d2.dtsi - this should ideally have gone
     through the ARM SoC tree but ended up here.

  This time I am using Geert Uytterhoeven as submaintainer for SH PFC
  since the are three-four people working in parallel with new Renesas
  ASICs.

  Summary of changes:

  Infrastructure:

   - Doug Anderson wrote a patch adding an "init" state different from
     the "default" state for pin control state handling in the core
     framework.  This is applied before the driver's probe() call if
     defined and takes precedence over "default".  If both are defined,
     "init" will be applied *before* probe() and "default" will be
     applied *after* probe().

  Significant subdriver improvements:

   - SH PFC is switched to getting GPIO ranges from the device tree
     ranges property on DT platforms.
   - Got rid of CONFIG_ARCH_SHMOBILE_LEGACY, we are all modernized.
   - Got rid of SH PFC hardcoded IRQ numbers.
   - Allwinner sunxi external interrupt through the "r" controller.
   - Moved the Cygnus driver to use DT-provided GPIO ranges.

  New drivers:

   - Atmel PIO4 pin controller for the SAMA4D2 family

  New subdrivers:

   - Rockchip RK3036 subdriver
   - Renesas SH PFC R8A7795 subdriver
   - Allwinner sunxi A83T PIO subdriver
   - Freescale i.MX7d iomux lpsr subdriver
   - Marvell Berlin BG4CT subdriver
   - SiRF Atlas 7 step B SoC subdriver
   - Intel Broxton SoC subdriver

  Apart from this, the usual slew if syntactic and semantic fixes"

* tag 'pinctrl-v4.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (81 commits)
  pinctrl: pinconf: remove needless loop
  pinctrl: uniphier: guard uniphier directory with CONFIG_PINCTRL_UNIPHIER
  pinctrl: zynq: fix UTF-8 errors
  pinctrl: zynq: Initialize early
  pinctrl: at91: add missing of_node_put
  pinctrl: tegra-xusb: Correct lane mux options
  pinctrl: intel: Add Intel Broxton pin controller support
  pinctrl: intel: Allow requesting pins which are in ACPI mode as GPIOs
  pinctrl: intel: Add support for multiple GPIO chips sharing the interrupt
  drivers/pinctrl: Add the concept of an "init" state
  pinctrl: uniphier: set input-enable before pin-muxing
  pinctrl: cygnus: Add new compatible string for gpio controller driver
  pinctrl: cygnus: Remove GPIO to Pinctrl pin mapping from driver
  pinctrl: cygnus: Optional DT property to support pin mappings
  pinctrl: sunxi: Add irq pinmuxing to sun6i "r" pincontroller
  pinctrl: sunxi: Fix irq_of_xlate for the r_pio pinctrl block
  pinctrl: sh-pfc: Remove obsolete r8a7778 platform_device_id entry
  pinctrl: sh-pfc: Remove obsolete r8a7779 platform_device_id entry
  pinctrl: sh-pfc: Stop including <linux/platform_data/gpio-rcar.h>
  usb: renesas_usbhs: Remove unneeded #include <linux/platform_data/gpio-rcar.h>
  ...
2015-11-02 12:30:39 -08:00
Lina Iyer 2547923d1c PM / Domains: Allocate memory outside domain locks
In preparation for supporting IRQ-safe domains, allocate domain data
outside the domain locks. These functions are not called in an atomic
context, so we can always allocate memory using GFP_KERNEL. By
allocating memory before the locks, we can safely lock the domain using
spinlocks instead of mutexes.

Reviewed-by: Kevin Hilman <khilman@linaro.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-02 02:26:17 +01:00
Lina Iyer 298cd0f088 PM / Domains: Remove dev->driver check for runtime PM
Remove check for driver of a device, for runtime PM. Device may be
suspended without an explicit driver. This check seems to be vestigial
and incorrect in the current context.

Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-02 02:23:11 +01:00
Viresh Kumar ad623c3148 PM / OPP: Parse all power-supply related bindings together
Move all DT parsing for the power supplies to a single function, rather
than keeping them at separate places. This will help manage things
properly.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-02 01:51:23 +01:00
Viresh Kumar b64b9c3f90 PM / OPP: Rename routines specific to old bindings with _v1
Clearly distinguish routines based on what version of bindings they
parse. We have already postfixed routines properly with _v2 for new
bindings. Postfix the older ones now with _v1.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-02 01:48:48 +01:00
Viresh Kumar d6d2a5289a PM / OPP: Improve print messages with pr_fmt
To identify OPP core's print messages easily, prefix them with
KBUILD_MODNAME.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-02 01:47:43 +01:00
Rafael J. Wysocki 5293fea28c Merge branch 'device-properties' into acpi-pci 2015-11-02 01:30:44 +01:00
Rafael J. Wysocki 1ab68460b1 Merge branches 'pm-avs', 'pm-clk' and 'powercap'
* pm-avs:
  PM / AVS: rockchip-io: Fix module autoload for OF platform driver

* pm-clk:
  PM / clk: Fix broken build due to non-matching code and header #ifdefs

* powercap:
  powercap / RAPL: Enable Broxton RAPL support
2015-11-02 00:54:49 +01:00
Rafael J. Wysocki 394f7164e6 Merge branch 'pm-opp'
* pm-opp:
  PM / OPP: passing NULL to PTR_ERR()
  PM / OPP: Move cpu specific code to opp/cpu.c
  PM / OPP: Move opp core to its own directory
  PM / OPP: Prefix exported opp routines with dev_pm_opp_
  PM / OPP: Rename opp init/free table routines
  PM / OPP: reuse of_parse_phandle()
2015-11-02 00:54:37 +01:00
Rafael J. Wysocki dcf3d0183f Merge branch 'pm-domains'
* pm-domains:
  PM / Domains: Merge measurements for PM QoS device latencies
  PM / Domains: Don't measure ->start|stop() latency in system PM callbacks
  PM / Domains: Rename *pm_genpd_poweron|poweroff()
  PM / Domains: Remove pm_genpd_poweron() API
  PM / Domains: Remove pm_genpd_poweroff_unused() API
  soc: dove: Let genpd deal with disabling of unused PM domains
  PM / Domains: Remove in_progress counter from struct generic_pm_domain
  PM / domains: Drop unused label
  PM / Domains: Remove cpuidle attach
  PM / Domains: Remove name based API for genpd
2015-11-02 00:54:30 +01:00
Rafael J. Wysocki 9bb4064ca3 Merge branch 'pm-sleep'
* pm-sleep:
  PM / hibernate: fix a comment typo
  input: i8042: Avoid resetting controller on system suspend/resume
  PM / PCI / ACPI: Kick devices that might have been reset by firmware
  PM / sleep: Add flags to indicate platform firmware involvement
  PM / sleep: Drop pm_request_idle() from pm_generic_complete()
  PCI / PM: Avoid resuming more devices during system suspend
  PM / wakeup: wakeup_source_create: use kstrdup_const
  PM / sleep: Report interrupt that caused system wakeup
2015-11-02 00:52:19 +01:00
Javi Merino d6d007429f PM / OPP: get the voltage for all OPPs
The OPP library is now used for power models to calculate the power
that a device would consume at a specific OPP.  To do that, we use a
simple power model which takes frequency and voltage as inputs.  We get
the voltage and frequency from the OPP library.

The devfreq cooling device for the thermal framework controls
temperature by disabling OPPs.  The power model needs to calculate the
power that would be consumed if we reenabled the OPP.  Therefore, let
dev_pm_opp_get_voltage() work for disabled OPPs.

Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Javi Merino <javi.merino@arm.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-10-30 10:19:42 -07:00
Ulf Hansson 2b1d88cda3 PM / Domains: Merge measurements for PM QoS device latencies
Measure latency does by itself contribute to an increased latency, thus we
should avoid it when it isn't needed.

By merging the latency measurements for the ->save_state() and the
->stop() callbacks, we get one measurement instead of two and we get one
value to store instead of two. Let's also apply the likewise change for
the ->start() and ->restore_state() callbacks.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Lina Iyer <lina.iyer@linaro.org>
Acked-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-10-28 04:33:04 +01:00
Ulf Hansson 51cda84489 PM / Domains: Don't measure ->start|stop() latency in system PM callbacks
Measure latency does by itself contribute to an increased latency, thus we
should avoid it when it isn't needed.

Genpd measures latencies in the system PM phase for the ->start|stop()
callbacks and is thus affecting the system PM suspend/resume time.
Moreover these latencies are validated only at runtime PM suspend/resume.

To this reasoning, let's decide to leave these measurements out of the
system PM phase. There should be plenty of occasions during runtime PM to
perform these measurements anyway.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Lina Iyer <lina.iyer@linaro.org>
Acked-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-10-28 04:33:04 +01:00
Geert Uytterhoeven a617561651 PM / clk: Fix broken build due to non-matching code and header #ifdefs
If an architecture's main Kconfig file doesn't include
kernel/power/Kconfig, but CONFIG_PM=y and HAVE_CLK=y (e.g. m68knommu
allmodconfig):

    drivers/base/power/clock_ops.c: In function ‘__pm_clk_add’:
    drivers/base/power/clock_ops.c:106: error: ‘struct pm_subsys_data’ has no member named ‘clock_list’
    drivers/base/power/clock_ops.c: At top level:
    drivers/base/power/clock_ops.c:120: error: redefinition of ‘pm_clk_add’
    include/linux/pm_clock.h:64: error: previous definition of ‘pm_clk_add’ was here
    drivers/base/power/clock_ops.c:135: error: redefinition of ‘pm_clk_add_clk’
    include/linux/pm_clock.h:69: error: previous definition of ‘pm_clk_add_clk’ was here
    drivers/base/power/clock_ops.c:171: error: redefinition of ‘pm_clk_remove’
    include/linux/pm_clock.h:73: error: previous definition of ‘pm_clk_remove’ was here
    drivers/base/power/clock_ops.c: In function ‘pm_clk_remove’:
    drivers/base/power/clock_ops.c:180: error: ‘struct pm_subsys_data’ has no member named ‘clock_list’
    drivers/base/power/clock_ops.c:180: error: ‘struct pm_subsys_data’ has no member named ‘clock_list’
    drivers/base/power/clock_ops.c: At top level:
    drivers/base/power/clock_ops.c:207: error: redefinition of ‘pm_clk_init’
    include/linux/pm_clock.h:54: error: previous definition of ‘pm_clk_init’ was here
    drivers/base/power/clock_ops.c: In function ‘pm_clk_init’:
    drivers/base/power/clock_ops.c:210: error: ‘struct pm_subsys_data’ has no member named ‘clock_list’
    drivers/base/power/clock_ops.c: At top level:
    drivers/base/power/clock_ops.c:221: error: redefinition of ‘pm_clk_create’
    include/linux/pm_clock.h:57: error: previous definition of ‘pm_clk_create’ was here
    drivers/base/power/clock_ops.c:234: error: redefinition of ‘pm_clk_destroy’
    include/linux/pm_clock.h:61: error: previous definition of ‘pm_clk_destroy’ was here
    drivers/base/power/clock_ops.c: In function ‘pm_clk_destroy’:
    drivers/base/power/clock_ops.c:246: error: ‘struct pm_subsys_data’ has no member named ‘clock_list’
    drivers/base/power/clock_ops.c:246: error: ‘struct pm_subsys_data’ has no member named ‘clock_list’
    drivers/base/power/clock_ops.c: At top level:
    drivers/base/power/clock_ops.c:263: error: expected identifier or ‘(’ before ‘void’
    drivers/base/power/clock_ops.c:263: error: expected ‘)’ before numeric constant
    drivers/base/power/clock_ops.c:293: error: expected identifier or ‘(’ before ‘void’
    drivers/base/power/clock_ops.c:293: error: expected ‘)’ before numeric constant
    drivers/base/power/clock_ops.c: In function ‘pm_clk_runtime_suspend’:
    drivers/base/power/clock_ops.c:384: error: called object ‘0u’ is not a function
    drivers/base/power/clock_ops.c: In function ‘pm_clk_runtime_resume’:
    drivers/base/power/clock_ops.c:400: error: called object ‘0u’ is not a function

This happens because:
  - drivers/base/power/clock_ops.c depends on CONFIG_HAVE_CLK,
  - the failing code inside clock_ops.c additionally depends on
    CONFIG_PM,
  - the forward declarations and other definitions in <linux/pm_clock.h>
    depend on CONFIG_PM_CLK,
  - CONFIG_PM_CLK is defined as PM && HAVE_CLK in kernel/power/Kconfig,
    but it is not included on all architectures.

Fix this by protecting the failing code inside clock_ops.c by
CONFIG_PM_CLK instead of CONFIG_PM, so it matches <linux/pm_clock.h>.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-10-28 04:30:44 +01:00
Douglas Anderson ef0eebc051 drivers/pinctrl: Add the concept of an "init" state
For pinctrl the "default" state is applied to pins before the driver's
probe function is called.  This is normally a sensible thing to do,
but in some cases can cause problems.  That's because the pins will
change state before the driver is given a chance to program how those
pins should behave.

As an example you might have a regulator that is controlled by a PWM
(output high = high voltage, output low = low voltage).  The firmware
might leave this pin as driven high.  If we allow the driver core to
reconfigure this pin as a PWM pin before the PWM's probe function runs
then you might end up running at too low of a voltage while we probe.

Let's introudce a new "init" state.  If this is defined we'll set
pinctrl to this state before probe and then "default" after probe
(unless the driver explicitly changed states already).

An alternative idea that was thought of was to use the pre-existing
"sleep" or "idle" states and add a boolean property that we should
start in that mode.  This was not done because the "init" state is
needed for correctness and those other states are only present (and
only transitioned in to and out of) when (optional) power management
is enabled.

Changes in v3:
- Moved declarations to pinctrl/devinfo.h
- Fixed author/SoB

Changes in v2:
- Added comment to pinctrl_init_done() as per Linus W.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-27 11:24:23 +01:00
Rafael J. Wysocki ab736d7dc1 Merge branch 'device-properties'
* device-properties:
  ACPI / property: Fix subnode lookup scope for data-only subnodes
  acpi-dma: Add support for "dma-names" device property
  device property: Add fwnode_property_match_string()
  ACPI / property: Extend device_get_next_child_node() to data-only nodes
  ACPI / gpio: Split acpi_get_gpiod_by_index()
  ACPI / property: Extend fwnode_property_* to data-only subnodes
  ACPI / property: Expose data-only subnodes via sysfs
  ACPI / property: Add support for data-only subnodes
  ACPI / property: Add routine for extraction of _DSD properties
2015-10-25 22:51:48 +01:00
Rohit Vaswani 67a2e213e7 mm: cma: fix incorrect type conversion for size during dma allocation
This was found during userspace fuzzing test when a large size dma cma
allocation is made by driver(like ion) through userspace.

  show_stack+0x10/0x1c
  dump_stack+0x74/0xc8
  kasan_report_error+0x2b0/0x408
  kasan_report+0x34/0x40
  __asan_storeN+0x15c/0x168
  memset+0x20/0x44
  __dma_alloc_coherent+0x114/0x18c

Signed-off-by: Rohit Vaswani <rvaswani@codeaurora.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-10-23 17:55:10 +09:00
Zhen Lei 56f2de81e0 of: to support binding numa node to specified device in devicetree
For now, in function device_add, the new device will be forced to
inherit the numa node of its parent. But this will override the device's
numa node which configured in devicetree.

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-17 22:11:50 -07:00
Rafael J. Wysocki 88cfe5356a Merge back earlier 'pm-domains' material for v4.4. 2015-10-16 22:12:57 +02:00
Ulf Hansson a98f1b78ec PM / Domains: Fix validation of latency constraints in genpd governor
Commit ba2bbfbf63 (PM / Domains: Remove intermediate states from the
power off sequence) changed the power off sequence in genpd. That also
required some updates regarding the validation of latency constraints in
the genpd governor. Unfortunate that wasn't covered, so let's fix this.

From a runtime PM and latency point of view, we need to consider the worst
case scenario while validating latency constraints. That's typically when
a call to pm_runtime_get_sync() needs to wait for a ongoing runtime
suspend operation to be carried out, as it then also needs to wait for the
device to be runtime resumed again.

The above mentioned commit made the genpd governor's ->stop_ok() callback
responsible of validating genpd's device's runtime suspend/resume latency.
In other words, the constraint needs to be validated towards the relevant
latencies present in genpd's ->runtime_suspend|resume() callbacks.

Earlier, that included latencies from the ->stop|start() callbacks, but as
->save|restore_state() are now also being invoked from genpd's
->runtime_suspend|resume() and to comply with the worst case scenario,
let's take also those latencies into account.

Fixes: ba2bbfbf63 (PM / Domains: Remove intermediate states from the power off sequence)
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-10-14 02:34:43 +02:00
Ulf Hansson 7420aa4fed PM / Domains: Rename *pm_genpd_poweron|poweroff()
This is another step to get consistent names of functions in genpd. Let's
rename the internal *pm_genpd_poweron|poweroff() into
*genpd_poweron|poweroff().

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-10-14 02:31:54 +02:00
Rafael J. Wysocki 58a1fbbb2e PM / PCI / ACPI: Kick devices that might have been reset by firmware
There is a concern that if the platform firmware was involved in
the system resume that's being completed,  some devices might have
been reset by it and if those devices had the power.direct_complete
flag set during the preceding suspend transition, they may stay
in a reset-power-on state indefinitely (until they are runtime-resumed
and then suspended again).  That may not be a big deal from the
individual device's perspective, but if the system is an SoC, it may
be prevented from entering deep SoC-wide low-power states on idle
because of that.

The devices that are most likely to be affected by this issue are
PCI devices and ACPI-enumerated devices using the general ACPI PM
domain, so to prevent it from happening for those devices, force a
runtime resume for them if they have their power.direct_complete
flags set and the platform firmware was involved in the resume
transition currently in progress.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-10-14 02:17:34 +02:00
Rafael J. Wysocki c2df86ea92 PM / sleep: Drop pm_request_idle() from pm_generic_complete()
The pm_request_idle() in pm_generic_complete() is pointless as it is
called with the runtime PM usage counter different from zero (bumped
up by the core during the prepare phase of system suspend) and the
core calls pm_runtime_put() for all devices after executing their
complete callbacks, so drop it.

This allows the PCI PM layer to use pm_generic_complete() too.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-10-14 02:17:06 +02:00
Greg Kroah-Hartman 8346aa765e Revert "mm: Check if section present during memory block (un)registering"
This reverts commit 7568fb63f5 as it's
already in Linus's tree through a different patch.

Reported-by: Tony Luck <tony.luck@intel.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: stable@vger.kernel.org #v3.15
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-13 10:57:25 -07:00
Marc Zyngier be5436c83a irqdomain/msi: Use fwnode instead of of_node
As we continue to push of_node towards the outskirts of irq domains,
let's start tackling the case of msi_create_irq_domain and its little
friends.

This has limited impact in both PCI/MSI, platform MSI, and a few
drivers.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: Tomasz Nowicki <tomasz.nowicki@linaro.org>
Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Cc: Graeme Gregory <graeme@xora.org.uk>
Cc: Jake Oshins <jakeo@microsoft.com>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Link: http://lkml.kernel.org/r/1444737105-31573-17-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-13 19:01:25 +02:00
Ulf Hansson ea823c7cbf PM / Domains: Remove pm_genpd_poweron() API
Once genpd could be configured to be built with CONFIG_PM_RUNTIME unset
(nowadays CONFIG_PM), the pm_genpd_poweron() API served a purpose, since
it allowed users to power on a PM domain.

As such configuration no longer is supported, users shall solely rely on
using some of the runtime PM APIs to power on a PM domain.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-10-12 23:27:02 +02:00