Граф коммитов

33 Коммитов

Автор SHA1 Сообщение Дата
Daniel Wagner dc8b73ebe5 hwmon: (adt7470) No need for additional synchronization on kthread_stop()
The kthread_stop() waits for the thread to exit. There is no need for an
additional synchronization needed to join on the kthread.

The completion was added by 89fac11cb3 ("adt7470: make automatic fan
control really work").

Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Cc: Darrick J. Wong <djwong@us.ibm.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-09-18 10:10:26 -07:00
Joshua Scott 93cacfd41f hwmon: (adt7470) Allow faster removal
adt7470_remove will wait for the update thread to complete before
returning. This had a worst-case time of up to the user-configurable
auto_update_interval.

Replace msleep_interruptible with set_current_state and schedule_timeout
so that kthread_stop will interrupt the sleep.

Signed-off-by: Joshua Scott <joshua.scott@alliedtelesis.co.nz>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-09-10 16:21:09 -07:00
Joshua Scott feca3132d9 hwmon: (adt7470) Add write support to alarm_mask
Add write support for the alarm_mask. A base of 0 is provided so that
either hex or decimal can be used. The hex format when reading alarm_mask
is unchanged.

Signed-off-by: Joshua Scott <joshua.scott@alliedtelesis.co.nz>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-09-10 16:20:23 -07:00
Joshua Scott aa18cc911a hwmon: (adt7470) Expose PWM frequency to sysfs
The ADT7470 supports a variety of PWM frequencies. This patch allows the
frequency to be configured and viewed through the sysfs entry pwm1_freq.

Signed-off-by: Joshua Scott <joshua.scott@alliedtelesis.co.nz>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-09-08 21:34:16 -07:00
Axel Lin 3048577609 hwmon: (adt7470) Convert to devm_hwmon_device_register_with_groups
Use ATTRIBUTE_GROUPS macro and devm_hwmon_device_register_with_groups() to
simplify the code a bit.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-08-04 07:01:39 -07:00
Axel Lin 9027d933a9 hwmon: (adt7470) Avoid forward declaration
Reorder functions to avoid forward declaration.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-08-04 07:01:39 -07:00
Guenter Roeck de12d6f4b1 hwmon: (adt7470) Fix writes to temperature limit registers
Temperature limit registers are signed. Limits therefore need
to be clamped to (-128, 127) degrees C and not to (0, 255)
degrees C.

Without this fix, writing a limit of 128 degrees C sets the
actual limit to -128 degrees C.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: stable@vger.kernel.org
Reviewed-by: Axel Lin <axel.lin@ingics.com>
2014-07-16 21:18:47 -07:00
Darrick J. Wong 5407e05135 hwmon: Change my email address.
I've changed employers, so change the email addresses to match.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-08-27 08:28:01 -07:00
Curt Brune 93d783bcca hwmon: (adt7470) Fix incorrect return code check
In adt7470_write_word_data(), which writes two bytes using
i2c_smbus_write_byte_data(), the return codes are incorrectly AND-ed
together when they should be OR-ed together.

The return code of i2c_smbus_write_byte_data() is zero for success.

The upshot is only the first byte was ever written to the hardware.
The 2nd byte was never written out.

I noticed that trying to set the fan speed limits was not working
correctly on my system.  Setting the fan speed limits is the only
code that uses adt7470_write_word_data().  After making the change
the limit settings work and the alarms work also.

Signed-off-by: Curt Brune <curt@cumulusnetworks.com>
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-08-08 12:43:07 -07:00
Kees Cook f170168b9a drivers: avoid parsing names as kthread_run() format strings
Calling kthread_run with a single name parameter causes it to be handled
as a format string. Many callers are passing potentially dynamic string
content, so use "%s" in those cases to avoid any potential accidents.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:41 -07:00
Guenter Roeck 2a844c148e hwmon: Replace SENSORS_LIMIT with clamp_val
SENSORS_LIMIT and the generic clamp_val have the same functionality,
and clamp_val is more efficient.

This patch reduces text size by 9052 bytes and bss size by 11624 bytes
for x86_64 builds.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: George Joseph <george.joseph@fairview5.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
2013-01-25 21:03:54 -08:00
Guenter Roeck 9cc7dcc523 hwmon: (adt7470) Convert to use devm_ functions
Convert to use devm_ functions to reduce code size and simplify the code.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-09-23 21:08:30 -07:00
Axel Lin f0967eea80 hwmon: convert drivers/hwmon/* to use module_i2c_driver()
This patch converts the drivers in drivers/hwmon/* to use the
module_i2c_driver() macro which makes the code smaller and a bit simpler.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: Corentin Labbe <corentin.labbe@geomatys.fr>
Cc: Dirk Eibach <eibach@gdsys.de>
Cc: "Mark M. Hoffman" <mhoffman@lightlink.com>
Cc: Steve Glendinning <steve.glendinning@smsc.com>
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Guillaume Ligneul <guillaume.ligneul@gmail.com>
Cc: David George <david.george@ska.ac.za>
Cc: "Hans J. Koch" <hjk@hansjkoch.de>
Cc: Marc Hulsman <m.hulsman@tudelft.nl>
Cc: Rudolf Marek <r.marek@assembler.cz>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-03-18 18:26:50 -07:00
Frans Meulenbroeks 6b904b623a hwmon: (adt7470) fix checkpatch issues
fixed:
ERROR: that open brace { should be on the previous line
#1135: FILE: adt7470.c:1135:
+static struct attribute *adt7470_attr[] =
+{

ERROR: do not use assignment in if condition
#1279: FILE: adt7470.c:1279:
+	if ((err = sysfs_create_group(&client->dev.kobj, &data->attrs)))

Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-03-18 18:26:40 -07:00
Frans Meulenbroeks 179c4fdb56 hwmon: replaced strict_str* with kstr*
replaced strict_strtol with kstrtol and
replaced strict_strtuol with kstrtuol

This satisfies checkpatch -f
Compile tested only: no warnings or errors given

Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-01-05 08:19:34 -08:00
Joe Perches 2e991201e4 hwmon: (adt7470) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:02 -08:00
Axel Lin f7334b4ca9 hwmon: (adt7470) Return proper error code for adt7470_probe()
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-11-11 09:32:07 -08:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Jean Delvare 1f86df49dd i2c: Drop I2C_CLIENT_INSMOD_1
This macro simply declares an enum, so drivers might as well declare
it themselves.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Wolfram Sang <w.sang@pengutronix.de>
2009-12-14 21:17:26 +01:00
Jean Delvare c3813d6af1 i2c: Get rid of struct i2c_client_address_data
Struct i2c_client_address_data only contains one field at this point,
which makes its usefulness questionable. Get rid of it and pass simple
address lists around instead.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Wolfram Sang <w.sang@pengutronix.de>
2009-12-14 21:17:25 +01:00
Jean Delvare 310ec79210 i2c: Drop the kind parameter from detect callbacks
The "kind" parameter always has value -1, and nobody is using it any
longer, so we can remove it.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Wolfram Sang <w.sang@pengutronix.de>
2009-12-14 21:17:23 +01:00
Jean Delvare 52df6440a2 hwmon: Clean up detect functions
As kind is now hard-coded to -1, there is room for code clean-ups.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Corentin Labbe <corentin.labbe@geomatys.fr>
Cc: "Mark M. Hoffman" <mhoffman@lightlink.com>
Cc: Juerg Haefliger <juergh@gmail.com>
Cc: Riku Voipio <riku.voipio@iki.fi>
Acked-by: "Hans J. Koch" <hjk@linutronix.de>
Cc: Rudolf Marek <r.marek@assembler.cz>
2009-12-09 20:35:57 +01:00
Darrick J. Wong 89fac11cb3 adt7470: make automatic fan control really work
It turns out that the adt7470's automatic fan control algorithm only works
when the temperature sensors get updated.  This in turn happens only when
someone tells the chip to read its temperature sensors.  Regrettably, this
means that we have to drive the chip periodically.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 15:59:18 -08:00
Darrick J. Wong 2f22d5dff6 adt7470: observe the number of temperature sensors to shorten update time
The adt7470 driver currently assumes that 1s is the proper time to wait to
read all temperature sensors.  However, the correct time is 200ms *
number_of_sensors.  This patch sets the default time to provide for 10
sensors and then lowers it based on the number of sensor inputs that have
nozero values.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 15:59:18 -08:00
Darrick J. Wong 2e75a4b7ae adt7470: fix pwm at a certain level during temperature sensor scan
In the small window that it takes to read the temperature sensors, the pwm
outputs momentarily drop to 0.  This causes a noticeable hiccup in fan
speed, which is slightly annoying.  The solution is to manually program
the pwm output with whatever the automatic value is and then shift the
fans to manual control while reading temperatures.  Once that is done, put
the fans back to whatever mode of control was there before.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 15:59:18 -08:00
Darrick J. Wong 8f8c1fb0c8 adt74{62, 70, 73}: Use DIV_ROUND_CLOSEST for rounded division
Modify some hwmon drivers to use DIV_ROUND_CLOSEST instead of bloating
source with (naughty) macros.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 15:59:18 -08:00
Darrick J. Wong 05a9bd46e4 adt7470: check input range when sysfs files are written
Implement correct range checking for adt7470 to prevent userland from
writing impossible values into the chip, and cap out-of-range values per
standard hwmon conventions.

Implement correct rounding of input values per standard hwmon conventions.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-12 17:17:17 -08:00
Jean Delvare 008f1ca51e hwmon: (adt7470) Convert to a new-style i2c driver
The new-style adt7470 driver implements the optional detect() callback
to cover the use cases of the legacy driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Darrick J. Wong <djwong@us.ibm.com>
2008-07-16 19:30:10 +02:00
Mark M. Hoffman 25e9c86d5a hwmon: normal_i2c arrays should be const
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-02-18 21:58:15 -05:00
Darrick J. Wong fe03f28cf3 hwmon: (adt7470) Support per-sensor alarm files
Remove the old alarms hack and replace it with per-sensor alarm files.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-02-07 20:39:42 -05:00
Robert P. J. Day ce9c2f449b hwmon: (adt7470) Replace power-of-two test
Since <linux/log2.h> already supplies a power-of-two test, there's no
point in having this source file redefine it again.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-02-07 20:39:40 -05:00
Tony Jones 1beeffe433 hwmon: Convert from class_device to device
Convert from class_device to device for hwmon_device_register/unregister

Signed-off-by: Tony Jones <tonyj@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-10-09 22:56:30 -04:00
Darrick J. Wong 6f9703d0be hwmon: add support for adt7470
New driver to expose temperature and fan controls attached to Analog
Devices ADT7470 hwmon chips.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-10-09 22:56:29 -04:00