Use arrays to support more core independent div settings.
A55 supports each core to work at different frequencies, and each core
has an independent divider control.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20210315085608.16010-4-zhangqing@rock-chips.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
side. The two main highlights in the core framework are the addition of an bulk
clk_get API that handles optional clks and an extra debugfs file that tells the
developer about the current parent of a clk.
The driver updates are dominated by i.MX in the diffstat, but that is mostly
because that SoC has started converting to the clk_hw style of clk
registration. The next big update is in the Amlogic meson clk driver that
gained some support for audio, cpu, and temperature clks while fixing some PLL
issues. Finally, the biggest thing that stands out is the conversion of a large
part of the Allwinner sunxi-ng driver to the new clk parent scheme that uses
less strings and more pointer comparisons to match clk parents and children up.
In general, it looks like we have a lot of little fixes and tweaks here and
there to clk data along with the normal addition of a handful of new drivers
and a couple new core framework features.
Core:
- Add a 'clk_parent' file in clk debugfs
- Add a clk_bulk_get_optional() API (with devm too)
New Drivers:
- Support gated clk controller on MIPS based BCM63XX SoCs
- Support SiLabs Si5341 and Si5340 chips
- Support for CPU clks on Raspberry Pi devices
- Audsys clock driver for MediaTek MT8516 SoCs
Updates:
- Convert a large portion of the Allwinner sunxi-ng driver to new clk parent scheme
- Small frequency support for SiLabs Si544 chips
- Slow clk support for AT91 SAM9X60 SoCs
- Remove dead code in various clk drivers (-Wunused)
- Support for Marvell 98DX1135 SoCs
- Get duty cycle of generic pwm clks
- Improvement in mmc phase calculation and cleanup of some rate defintions
- Switch i.MX6 and i.MX7 clock drivers to clk_hw based APIs
- Add GPIO, SNVS and GIC clocks for i.MX8 drivers
- Mark imx6sx/ul/ull/sll MMDC_P1_IPG and imx8mm DRAM_APB as critical clock
- Correct imx7ulp nic1_bus_clk and imx8mm audio_pll2_clk clock setting
- Add clks for new Exynos5422 Dynamic Memory Controller driver
- Clock definition for Exynos4412 Mali
- Add CMM (Color Management Module) clocks on Renesas R-Car H3, M3-N, E3, and D3
- Add TPU (Timer Pulse Unit / PWM) clocks on Renesas RZ/G2M
- Support for 32 bit clock IDs in TI's sci-clks for J721e SoCs
- TI clock probing done from DT by default instead of firmware
- Fix Amlogic Meson mpll fractional part and spread sprectrum issues
- Add Amlogic meson8 audio clocks
- Add Amlogic g12a temperature sensors clocks
- Add Amlogic g12a and g12b cpu clocks
- Add TPU (Timer Pulse Unit / PWM) clocks on Renesas R-Car H3, M3-W, and M3-N
- Add CMM (Color Management Module) clocks on Renesas R-Car M3-W
- Add Clock Domain support on Renesas RZ/N1
-----BEGIN PGP SIGNATURE-----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=mK0C
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This round of clk driver and framework updates is heavy on the driver
update side. The two main highlights in the core framework are the
addition of an bulk clk_get API that handles optional clks and an
extra debugfs file that tells the developer about the current parent
of a clk.
The driver updates are dominated by i.MX in the diffstat, but that is
mostly because that SoC has started converting to the clk_hw style of
clk registration. The next big update is in the Amlogic meson clk
driver that gained some support for audio, cpu, and temperature clks
while fixing some PLL issues. Finally, the biggest thing that stands
out is the conversion of a large part of the Allwinner sunxi-ng driver
to the new clk parent scheme that uses less strings and more pointer
comparisons to match clk parents and children up.
In general, it looks like we have a lot of little fixes and tweaks
here and there to clk data along with the normal addition of a handful
of new drivers and a couple new core framework features.
Core:
- Add a 'clk_parent' file in clk debugfs
- Add a clk_bulk_get_optional() API (with devm too)
New Drivers:
- Support gated clk controller on MIPS based BCM63XX SoCs
- Support SiLabs Si5341 and Si5340 chips
- Support for CPU clks on Raspberry Pi devices
- Audsys clock driver for MediaTek MT8516 SoCs
Updates:
- Convert a large portion of the Allwinner sunxi-ng driver to new clk parent scheme
- Small frequency support for SiLabs Si544 chips
- Slow clk support for AT91 SAM9X60 SoCs
- Remove dead code in various clk drivers (-Wunused)
- Support for Marvell 98DX1135 SoCs
- Get duty cycle of generic pwm clks
- Improvement in mmc phase calculation and cleanup of some rate defintions
- Switch i.MX6 and i.MX7 clock drivers to clk_hw based APIs
- Add GPIO, SNVS and GIC clocks for i.MX8 drivers
- Mark imx6sx/ul/ull/sll MMDC_P1_IPG and imx8mm DRAM_APB as critical clock
- Correct imx7ulp nic1_bus_clk and imx8mm audio_pll2_clk clock setting
- Add clks for new Exynos5422 Dynamic Memory Controller driver
- Clock definition for Exynos4412 Mali
- Add CMM (Color Management Module) clocks on Renesas R-Car H3, M3-N, E3, and D3
- Add TPU (Timer Pulse Unit / PWM) clocks on Renesas RZ/G2M
- Support for 32 bit clock IDs in TI's sci-clks for J721e SoCs
- TI clock probing done from DT by default instead of firmware
- Fix Amlogic Meson mpll fractional part and spread sprectrum issues
- Add Amlogic meson8 audio clocks
- Add Amlogic g12a temperature sensors clocks
- Add Amlogic g12a and g12b cpu clocks
- Add TPU (Timer Pulse Unit / PWM) clocks on Renesas R-Car H3, M3-W, and M3-N
- Add CMM (Color Management Module) clocks on Renesas R-Car M3-W
- Add Clock Domain support on Renesas RZ/N1"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (190 commits)
clk: consoldiate the __clk_get_hw() declarations
clk: sprd: Add check for return value of sprd_clk_regmap_init()
clk: lochnagar: Update DT binding doc to include the primary SPDIF MCLK
clk: Add Si5341/Si5340 driver
dt-bindings: clock: Add silabs,si5341
clk: clk-si544: Implement small frequency change support
clk: add BCM63XX gated clock controller driver
devicetree: document the BCM63XX gated clock bindings
clk: at91: sckc: use dedicated functions to unregister clock
clk: at91: sckc: improve error path for sama5d4 sck registration
clk: at91: sckc: remove unnecessary line
clk: at91: sckc: improve error path for sam9x5 sck register
clk: at91: sckc: add support to free slow clock osclillator
clk: at91: sckc: add support to free slow rc oscillator
clk: at91: sckc: add support to free slow oscillator
clk: rockchip: export HDMIPHY clock on rk3228
clk: rockchip: add watchdog pclk on rk3328
clk: rockchip: add clock id for hdmi_phy special clock on rk3228
clk: rockchip: add clock id for watchdog pclk on rk3328
clk: at91: sckc: add support for SAM9X60
...
Convert the boilerplate code for manual addition of the watchdog clock
to the new SGRF_GATE macro for all affected socs.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Based on 3 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version [author] [kishon] [vijay] [abraham]
[i] [kishon]@[ti] [com] this program is distributed in the hope that
it will be useful but without any warranty without even the implied
warranty of merchantability or fitness for a particular purpose see
the gnu general public license for more details
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version [author] [graeme] [gregory]
[gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i]
[kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema]
[hk] [hemahk]@[ti] [com] this program is distributed in the hope
that it will be useful but without any warranty without even the
implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 1105 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This exports the clock for the pclk gate of the eFuse that is part of
the RK3368 SoCs. So we can use it from the dt-bindings.
Signed-off-by: Romain Perier <romain.perier@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The jtag clk no driver to handle them.
But this clk need enable,so make it as critical.
The ddrphy/ddrupctl clks no driver to handle them,
Chip design requirements for these clock to always on,
The pmu_hclk_otg0 is Chip design defect, must be always on,
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
We should call iounmap to relase reg_base since it's not going
to be used any more if failing to init clk.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
There are need to support Multi-CRUs probability in future, but
it is not supported on the current Rockchip Clock Framework.
Therefore, this patch add support a provider as the parameter
handler when we call the clock register functions for per CRU.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Thers are only two parent PLLs that APLL and GPLL for core on the
previous SoCs (RK3066/RK3188/RK3288/RK3368). Hence, we set fixed
GPLL as alternate parent when core is switching freq.
Since RK3399 big.LITTLE architecture, we need to select and adapt
more PLLs (ALPLL/ABPLL/DPLL/GPLL) sources.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
fixes for missing error-handling in mmc-phase, inverters and cpu-clocks
and some more clock-ids.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCAAGBQJW2N6oAAoJEPOmecmc0R2BUgQH/R+inbboTw31Gsa5KOEeoGDb
BwET4Cw5rD2ns1rOGZtQ3nFGv5I7fKq1ChMuQVMAMbv/60rEjGm3ACOWbxrTg2+P
o7FVSGoE+fOPZKfxbPGC3c1rSDnlAwwHhZWxXKvTrybAKdhoiHhzbx5ycc5r57vw
uVzLWJL3PgkOCnc4lbE8Dtr6DYEaIA0w7sZ0oplXhMxm49YBzlJi1zWcx400Xb8D
ourvqbD2aWGSTfjWcQlxSHCHSVKZDfZRfJI4c16XAYJ1SXtWsAUqTTpDAgFgrFI/
o9v+V4JMKGCYfqb1P+h8dMvc/8FJgvwdRY2OtWAWVlrYZpZ9cp+nDeLP2TEv554=
=ekax
-----END PGP SIGNATURE-----
Merge tag 'v4.6-rockchip-clk2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-next
Pull second batch of rockchip clk updates from Heiko Stuebner:
Inclusion of the rk3368 fractional dividers into our handling scheme,
fixes for missing error-handling in mmc-phase, inverters and cpu-clocks
and some more clock-ids.
* tag 'v4.6-rockchip-clk2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
clk: rockchip: include downstream muxes into fractional dividers on rk3368
clk: rockchip: set the clock ids for RK3228 HDMI
clk: rockchip: set the clock ids for RK3228 VOP
clk: rockchip: add the tsadc clocks found on rk3228 SoCs
clk: rockchip: add the new clock ids for RK3228 HDMI
clk: rockchip: add the new clock ids for RK3228 VOP
clk: rockchip: add id of the tsadc clock found on rk3228 SoCs
clk: rockchip: fix coding style for clk-cpu.c
clk: rockchip: don't return NULL when registering mmc branch fails
clk: rockchip: don't return NULL when registering inverter fails
clk: rockchip: check grf when waiting pll lock
clk: rockchip: disable alt_parent clk in err cases when registering cpuclk
During the initial conversion to the newly introduced combined fractional
dividers+muxes the rk3368 clocks were left out, so convert them now.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
to be able to also declare factor clocks in their correct
place in the clock tree instead of having to register factor
clocks in the init callback separately. And as always some more
clock-ids and non-regression fixes for mistakes introduced in
past kernel releases.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCAAGBQJWuwINAAoJEPOmecmc0R2BUgMIAKmXROUpwuap5hhDv+XapDyc
drU3DmOwFQeIiaODZQVFlx8CcXUN6h/8cPZnc4Qd/ChO73TxfvtWY3S7n0n3F/EH
RIceQ30OHTUEYh/k449Sf/sTEOW68h4TdhaVrw2gJYKsJ5fg2ih5o6naWnWWE6Ig
WUh+xeeYdG6L8hCLcUA8sujE3EpG5kJelnWiMBedx6CbuTSSfJcB9tTkg1eOa/R+
jyBgYJJSuSEwG4mJijV61tanZw1FhWu+i4dEAGHkWgimuGekO4CEnRRczZ1hw7x2
O/cBfpLW4D2iGMlrvyUhcB/pe/TmRdz4SfzDSTwLPtpCfqEiZRmxH4mwW4s8hv4=
=igdK
-----END PGP SIGNATURE-----
Merge tag 'v4.6-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-next
Introduction of a factor type and a variant containing a gate
to be able to also declare factor clocks in their correct
place in the clock tree instead of having to register factor
clocks in the init callback separately. And as always some more
clock-ids and non-regression fixes for mistakes introduced in
past kernel releases.
Clean up the init code and move the creation of factor clocks to the
appropriate positions coming from the clock architecture diagrams.
This also unifies the artificial separation of the hclk_vcodec etc clocks
again.
We do keep the separate definition of some watchdog and usb480m pseudo
clocks for now, as they're not real factor clocks from the clock-tree
but placeholders for fixes to come (usb480m gets supplied by the
missing driver for the new usbphy type and the watchdog-gate is sitting
somewhere else together which we cannot model currently).
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
I2S_2CH set freq need to select parent and calculate parent freq.
so just mark it as the CLK_SET_RATE_PARENT flag.
Signed-off-by: zhangqing <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
SPDIF_8CH set freq need to select parent and calculate parent freq.
so just mark it as the CLK_SET_RATE_PARENT flag.
Signed-off-by: zhangqing <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The edp_24m parent select bit define is:
1'b0:xin24m
1'b1:1'b0(dummy)
so adapt the parent sel bit to the currect one.
Signed-off-by: zhangqing <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The vdpu and vepu clocks can also be parented to the npll and current
parent list also is wrong as it would use the npll as "usbphy" source,
so adapt the parent to the correct one.
Fixes: 3536c97a52 ("clk: rockchip: add rk3368 clock controller")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: zhangqing <zhangqing@rock-chips.com>
Cc: stable@vger.kernel.org
Similar to commit 9880d4277f ("clk: rockchip: fix rk3288 cpuclk core
dividers") it seems the cpuclk dividers are one to high on the rk3368
as well.
And again similar to the previous fix, we opt to make the divider list
contain the values to be written to use the same paradigm for them on all
supported socs.
Fixes: 3536c97a52 ("clk: rockchip: add rk3368 clock controller")
Reported-by: Zhang Qing <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: zhangqing <zhangqing@rock-chips.com>
Cc: stable@vger.kernel.org
Both clusters have their mux bit in bit 7 of their respective register.
For whatever reason the big cluster currently lists bit 15 which is
definitly wrong.
Fixes: 3536c97a52 ("clk: rockchip: add rk3368 clock controller")
Reported-by: Zhang Qing <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: zhangqing <zhangqing@rock-chips.com>
Cc: stable@vger.kernel.org
Reference to the Rockchip RK3368 TRM v1.1, some clock
gates need to be updated.
Signed-off-by: Jianqun xu <jay.xu@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
As commit 1d33929e2a ("clk: rockchip: switch PLLs to slow mode before
reboot for rk3288") states, switching the PLLs to slow-mode is only
necessary when rebooting using the soft-reset done through the CRU.
The dwc2 controllers used create really big number of interrupts in
special constellations involving usb-hubs and their number is so high,
it can even overwhelm the interrupt handler if the cpu-speed os to low.
Right now the PLLs are put into slow-mode in a shutdown syscore_ops
callback which means it happens on all reboots (not only the soft-reset
ones) and even on poweroff actions.
This can result in the system not powering off and getting stuck instead,
so we should move the slow-mode change nearer to the actual reboot action.
For this we introduce the possiblity to also set a callback that gets
called from the restart-handler directly prior to restarting the system
and move the shutdown-callback to this new option.
With this the slow-mode switch is done only on the necessary reboots
and also has a smaller possibility of causing artifacts.
Fixes: 1d33929e2a ("clk: rockchip: switch PLLs to slow mode before reboot for rk3288")
Signed-off-by: Heiko Stuebner <heiko.stuebner@collabora.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Due to a copy-paste error the the rk3368 cpuclk settings were acessing
rk3288-specific register offsets. This never caused problems till now,
as cpu frequency scaling in't used currently at all.
Reported-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add aclk_bus and aclk_peri to the list of rk3368 critical clocks,
which are the base clocks that supply for all peripherals, never
to be disabled automatically.
Signed-off-by: Jianqun xu <jay.xu@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Most rk3368 boards (especially those with Pmic that followed the lead
from rk3368-evb-act8846) have a PWM regulator on them for vdd_logic.
This is the main voltage for all kinds of misc stuff including the
memory controller.
On these boards it is critically important to make sure that the PWM
never ever glitches and never loses its clock. Any glitch could
crash the system.
Right now there are no users of the PWM regulator and also Linux
thinks that the PWM regulator is disabled. Things happen to work
because firmware configured the PWM and Linux doesn't touch it.
..and the PWM's clock is marked as "ignore unused".
...but things _stop_ working if we turn off serial console. Why?
Because:
1. Serial console shares a parent clock with the PWM (pclk_cpu)
2. If we have no serial console then nobody is holding pclk_cpu on
at reboot time. It gets disabled.
We need to fix a lot of the above problems, but until we get
everything right the cleanest "hack" seems like it is to just keep
the "rk_pwm" clock on always.
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Again a result of the gpio-clock-liberation the rk3368 needs the
pclk_pd_pmu marked as critical, to boot successfully.
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Describe the clock tree and software resets of the rk3368 ARM64 SoC
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Elaine Zhang
Heiko Stuebner
Linus Torvalds
Heiko Stuebner
Thomas Gleixner
Stephen Boyd
Romain Perier
Shawn Lin
Xing Zheng
Stephen Boyd
Michael Turquette
Jianqun xu
Caesar Wang