JBD2 layer support triggers which are called when journaling layer moves
buffer to a certain state. We can use the frozen trigger, which gets
called when buffer data is frozen and about to be written out to the
journal, to compute block checksums for some buffer types (similarly as
does ocfs2). This avoids unnecessary repeated recomputation of the
checksum (at the cost of larger window where memory corruption won't be
caught by checksumming) and is even necessary when there are
unsynchronized updaters of the checksummed data.
So add superblock and journal trigger type arguments to
ext4_journal_get_write_access() and ext4_journal_get_create_access() so
that frozen triggers can be set accordingly. Also add inode argument to
ext4_walk_page_buffers() and all the callbacks used with that function
for the same purpose. This patch is mostly only a change of prototype of
the above mentioned functions and a few small helpers. Real checksumming
will come later.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210816095713.16537-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fix a signed vs unsigned and a void * pointer arithmetic warning.
This cleanup is also in e2fsprogs commit aec460db9a93 ("e2fsck: clean
up two gcc -Wall warnings in recovery.c").
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Remove unused variable store which was never used.
This fix is also in e2fsprogs commit 99a2294f85f0 ("e2fsck: value
stored to err is never read").
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This commit applies the e2fsck/recovery.c portions of commit
1e0c8ca7c08a ("e2fsck: fix portability problems caused by unaligned
accesses) from the e2fsprogs git tree.
The on-disk format for the ext4 journal can have unaigned 32-bit
integers. This can happen when replaying a journal using a obsolete
checksum format (which was never popularly used, since the v3 format
replaced v2 while the metadata checksum feature was being stablized).
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The function jbd2_journal_unregister_shrinker() was getting called
twice when the file system was getting unmounted. On Power and ARM
platforms this was causing kernel crash when unmounting the file
system, when a percpu_counter was destroyed twice.
Fix this by removing jbd2_journal_[un]register_shrinker() functions,
and inlining the shrinker setup and teardown into
journal_init_common() and jbd2_journal_destroy(). This means that
ext4 and ocfs2 now no longer need to know about registering and
unregistering jbd2's shrinker.
Also, while we're at it, rename the percpu counter from
j_jh_shrink_count to j_checkpoint_jh_count, since this makes it
clearer what this counter is intended to track.
Link: https://lore.kernel.org/r/20210705145025.3363130-1-tytso@mit.edu
Fixes: 4ba3fcdde7 ("jbd2,ext4: add a shrinker to release checkpointed buffers")
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Export jbd2_journal_[un]register_shrinker() to fix this error when
ext4 is built as a module:
ERROR: modpost: "jbd2_journal_unregister_shrinker" undefined!
ERROR: modpost: "jbd2_journal_register_shrinker" undefined!
Fixes: 4ba3fcdde7 ("jbd2,ext4: add a shrinker to release checkpointed buffers")
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210630083638.140218-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Now that __try_to_free_cp_buf() remove checkpointed buffer or transaction
when the buffer is not 'busy', which is only called by
journal_clean_one_cp_list(). This patch simplify this function by remove
__try_to_free_cp_buf() and invoke __cp_buffer_busy() directly.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210610112440.3438139-7-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Current metadata buffer release logic in bdev_try_to_free_page() have
a lot of use-after-free issues when umount filesystem concurrently, and
it is difficult to fix directly because ext4 is the only user of
s_op->bdev_try_to_free_page callback and we may have to add more special
refcount or lock that is only used by ext4 into the common vfs layer,
which is unacceptable.
One better solution is remove the bdev_try_to_free_page callback, but
the real problem is we cannot easily release journal_head on the
checkpointed buffer, so try_to_free_buffers() cannot release buffers and
page under memory pressure, which is more likely to trigger
out-of-memory. So we cannot remove the callback directly before we find
another way to release journal_head.
This patch introduce a shrinker to free journal_head on the checkpointed
transaction. After the journal_head got freed, try_to_free_buffers()
could free buffer properly.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210610112440.3438139-6-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Now that __jbd2_journal_remove_checkpoint() can detect buffer io error
and mark journal checkpoint error, then we abort the journal later
before updating log tail to ensure the filesystem works consistently.
So we could remove other redundant buffer io error checkes.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210610112440.3438139-5-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Now that we can be sure the journal is aborted once a buffer has failed
to be written back to disk, we can remove the journal abort logic in
jbd2_journal_try_to_free_buffers() which was introduced in
commit c044f3d836 ("jbd2: abort journal if free a async write error
metadata buffer"), because it may cost and propably is not safe.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210610112440.3438139-4-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Although we merged c044f3d836 ("jbd2: abort journal if free a async
write error metadata buffer"), there is a race between
jbd2_journal_try_to_free_buffers() and jbd2_journal_destroy(), so the
jbd2_log_do_checkpoint() may still fail to detect the buffer write
io error flag which may lead to filesystem inconsistency.
jbd2_journal_try_to_free_buffers() ext4_put_super()
jbd2_journal_destroy()
__jbd2_journal_remove_checkpoint()
detect buffer write error jbd2_log_do_checkpoint()
jbd2_cleanup_journal_tail()
<--- lead to inconsistency
jbd2_journal_abort()
Fix this issue by introducing a new atomic flag which only have one
JBD2_CHECKPOINT_IO_ERROR bit now, and set it in
__jbd2_journal_remove_checkpoint() when freeing a checkpoint buffer
which has write_io_error flag. Then jbd2_journal_destroy() will detect
this mark and abort the journal to prevent updating log tail.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210610112440.3438139-3-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The 'out' lable just return the 'ret' value and seems not required, so
remove this label and switch to return appropriate value immediately.
This patch also do some minor cleanup, no logical change.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210610112440.3438139-2-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This comments was for jbd2_fc_wait_bufs, not for jbd2_fc_release_bufs.
Remove this misleading comments.
Signed-off-by: yangerkun <yangerkun@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210608141236.459441-1-yangerkun@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add a flags argument to jbd2_journal_flush to enable discarding or
zero-filling the journal blocks while flushing the journal.
Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com>
Link: https://lore.kernel.org/r/20210518151327.130198-1-leah.rumancik@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Using no_printk() for jbd_debug() revealed two warnings:
fs/jbd2/recovery.c: In function 'fc_do_one_pass':
fs/jbd2/recovery.c:256:30: error: format '%d' expects a matching 'int' argument [-Werror=format=]
256 | jbd_debug(3, "Processing fast commit blk with seq %d");
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
fs/ext4/fast_commit.c: In function 'ext4_fc_replay_add_range':
fs/ext4/fast_commit.c:1732:30: error: format '%d' expects argument of type 'int', but argument 2 has type 'long unsigned int' [-Werror=format=]
1732 | jbd_debug(1, "Converting from %d to %d %lld",
The first one was added incorrectly, and was also missing a few newlines
in debug output, and the second one happened when the type of an
argument changed.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: d556435156 ("jbd2: avoid -Wempty-body warnings")
Fixes: 6db0746189 ("ext4: use BIT() macro for BH_** state bits")
Fixes: 5b849b5f96 ("jbd2: fast commit recovery path")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210409201211.1866633-1-arnd@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Assertion checks in jbd2_journal_dirty_metadata() are known to be racy
but we don't want to be grabbing locks just for them. We thus recheck
them under b_state_lock only if it looks like they would fail. Annotate
the checks with data_race().
Cc: stable@kernel.org
Reported-by: Hao Sun <sunhao.th@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210406161804.20150-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
There is no point in allocating memory for a synchronous flush.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a helper to read number of fast commit blocks from jbd2 superblock
and also rename the JBD2_MIN_FC_BLKS to
JBD2_DEFAULT_FAST_COMMIT_BLOCKS since this constant is just the
default number of fast commit blocks to use in case number of fast
commit blocks isn't set in jbd2 superblock.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201120202232.2240293-2-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Kernel-doc markup should use this format:
identifier - description
They should not have any type before that, as otherwise
the parser won't do the right thing.
Also, some identifiers have different names between their
prototypes and the kernel-doc markup.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/72f5c6628f5f278d67625f60893ffbc2ca28d46e.1605521731.git.mchehab+huawei@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add missing __acquires() and __releases() annotations. Also, in an
"this should never happen" WARN_ON check, if it *does* actually
happen, we need to release j_state_lock since this function is always
supposed to release that lock. Otherwise, things will quickly grind
to a halt after the WARN_ON trips.
Fixes: 96f1e09745 ("jbd2: avoid long hold times of j_state_lock...")
Cc: stable@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fast commit buffers should be filled in before toucing their
state. Remove code that sets buffer state as dirty before the buffer
is passed to the file system.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-12-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fast commit performance can be optimized if commit thread doesn't wait
for ongoing fast commits to complete until the transaction enters
T_FLUSH state. Document this optimization.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-11-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In jbd2_fc_end_commit_fallback(), we know which tid to commit. There's
no need for caller to pass it.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-10-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Variables journal->j_fc_off, journal->j_fc_wbuf are accessed during
commit path. Since today we allow only one process to perform a fast
commit, there is no need take state lock before accessing these
variables. This patch removes these locks and adds comments to
describe this.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-9-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch removes jbd2_fc_init() API and its related functions to
simplify enabling fast commits. With this change, the number of fast
commit blocks to use is solely determined by the JBD2 layer. So, we
move the default value for minimum number of fast commit blocks from
ext4/fast_commit.h to include/linux/jbd2.h. However, whether or not to
use fast commits is determined by the file system. The file system
just sets the fast commit feature using
jbd2_journal_set_features(). JBD2 layer then determines how many
blocks to use for fast commits (based on the value found in the JBD2
superblock).
Note that the JBD2 feature flag of fast commits is just an indication
that there are fast commit blocks present on disk. It doesn't tell
JBD2 layer about the intent of the file system of whether to it wants
to use fast commit or not. That's why, we blindly clear the fast
commit flag in journal_reset() after the recovery is done.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-7-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The on-disk superblock field sb->s_maxlen represents the total size of
the journal including the fast commit area and is no more the max
number of blocks available for a transaction. The maximum number of
blocks available to a transaction is reduced by the number of fast
commit blocks. So, this patch renames j_maxlen to j_total_len to
better represent its intent. Also, it adds a function to calculate max
number of bufs available for a transaction.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-6-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch adds fast commit area trackers in the journal_t
structure. These are initialized via the jbd2_fc_init() routine that
this patch adds. This patch also adds ext4/fast_commit.c and
ext4/fast_commit.h files for fast commit code that will be added in
subsequent patches in this series.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201015203802.3597742-4-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When ext4 is formatted with lazy_journal_init=1 and transactions from
the previous filesystem are still on disk, it is possible that they are
considered during a recovery after a crash. Because the checksum seed
has changed, the CRC check will fail, and the journal recovery fails
with checksum error although the journal is otherwise perfectly valid.
Fix the problem by checking commit block time stamps to determine
whether the data in the journal block is just stale or whether it is
indeed corrupt.
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Fengnan Chang <changfengnan@hikvision.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20201012164900.20197-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Introduce journal callbacks to allow different behaviors
for an inode in journal_submit|finish_inode_data_buffers().
The existing users of the current behavior (ext4, ocfs2)
are adapted to use the previously exported functions
that implement the current behavior.
Users are callers of jbd2_journal_inode_ranged_write|wait(),
which adds the inode to the transaction's inode list with
the JI_WRITE|WAIT_DATA flags. Only ext4 and ocfs2 in-tree.
Both CONFIG_EXT4_FS and CONFIG_OCSFS2_FS select CONFIG_JBD2,
which builds fs/jbd2/commit.c and journal.c that define and
export the functions, so we can call directly in ext4/ocfs2.
Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com>
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20201006004841.600488-3-mfo@canonical.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Export functions that implement the current behavior done
for an inode in journal_submit|finish_inode_data_buffers().
No functional change.
Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com>
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20201006004841.600488-2-mfo@canonical.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Remove the unnecessary chksum_err and checksum_seen variables as well as
some redundant code to make the function easier to understand.
[ With changes suggested by jack@ and tytso@ ]
Signed-off-by: Shijie Luo <luoshijie1@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200819122955.33526-1-luoshijie1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Parameter gfp_mask in jbd2_journal_try_to_free_buffers() is no longer
used after commit <536fc240e7147> ("jbd2: clean up
jbd2_journal_try_to_free_buffers()"), so just remove it.
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Link: https://lore.kernel.org/r/20200620025427.1756360-6-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If we free a metadata buffer which has been failed to async write out
in the background, the jbd2 checkpoint procedure will not detect this
failure in jbd2_log_do_checkpoint(), so it may lead to filesystem
inconsistency after cleanup journal tail. This patch abort the journal
if free a buffer has write_io_error flag to prevent potential further
inconsistency.
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Link: https://lore.kernel.org/r/20200620025427.1756360-5-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
jbd2_write_superblock() is under the buffer lock of journal superblock
before ending that superblock write, so add a missing unlock_buffer() in
in the error path before submitting buffer.
Fixes: 742b06b562 ("jbd2: check superblock mapped prior to committing")
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20200620061948.2049579-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Callers of __jbd2_journal_unfile_buffer() and
__jbd2_journal_refile_buffer() assume that the b_transaction is set. In
fact if it's not, we can end up with journal_head refcounting errors
leading to crash much later that might be very hard to track down. Add
asserts to make sure that is the case.
We also make sure that b_next_transaction is NULL in
__jbd2_journal_unfile_buffer() since the callers expect that as well and
we should not get into that stage in this state anyway, leading to
problems later on if we do.
Tested with fstests.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200617092549.6712-1-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
includes the per-inode DAX support, which was dependant on the DAX
infrastructure which came in via the XFS tree, and a number of
regression and bug fixes; most notably the "BUG: using
smp_processor_id() in preemptible code in ext4_mb_new_blocks" reported
by syzkaller.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAl7mgCcACgkQ8vlZVpUN
gaPftwf8C4w/7SG+CYLdwg0d2u9TKk77yDuWaioFHOcMSjZvG4TCSgtMhZxQnyty
9t4yqacILx12pCj/mZnrZp5BOSn9O2ZbuDoXNKNrFXU0BF+CsbnhvJvrrh1j/MUa
PPtcqyGFdOLSDvHSD9xPVT76juwh79aR8vB7qnQXaEO5wcLodZWoqBEFSKCl6Bo8
hjXs1EXidusKsoarQxW6mEITmnhU2S2fuCVDgVcoM/LmKwzbgqvlWrentq9u8qLH
W+XbjWgUtCM1byeDZWqe5FYyyJ8x+dTv7H5an3KR92EN6hKo5AOvzA0I41pZscq/
bJ9p2THDxJQX4rJBevGAS5mZ6hTkRw==
=z6eO
-----END PGP SIGNATURE-----
Merge tag 'ext4-for-linus-5.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull more ext4 updates from Ted Ts'o:
"This is the second round of ext4 commits for 5.8 merge window [1].
It includes the per-inode DAX support, which was dependant on the DAX
infrastructure which came in via the XFS tree, and a number of
regression and bug fixes; most notably the "BUG: using
smp_processor_id() in preemptible code in ext4_mb_new_blocks" reported
by syzkaller"
[1] The pull request actually came in 15 minutes after I had tagged the
rc1 release. Tssk, tssk, late.. - Linus
* tag 'ext4-for-linus-5.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4, jbd2: ensure panic by fix a race between jbd2 abort and ext4 error handlers
ext4: support xattr gnu.* namespace for the Hurd
ext4: mballoc: Use this_cpu_read instead of this_cpu_ptr
ext4: avoid utf8_strncasecmp() with unstable name
ext4: stop overwrite the errcode in ext4_setup_super
ext4: fix partial cluster initialization when splitting extent
ext4: avoid race conditions when remounting with options that change dax
Documentation/dax: Update DAX enablement for ext4
fs/ext4: Introduce DAX inode flag
fs/ext4: Remove jflag variable
fs/ext4: Make DAX mount option a tri-state
fs/ext4: Only change S_DAX on inode load
fs/ext4: Update ext4_should_use_dax()
fs/ext4: Change EXT4_MOUNT_DAX to EXT4_MOUNT_DAX_ALWAYS
fs/ext4: Disallow verity if inode is DAX
fs/ext4: Narrow scope of DAX check in setflags
In the ext4 filesystem with errors=panic, if one process is recording
errno in the superblock when invoking jbd2_journal_abort() due to some
error cases, it could be raced by another __ext4_abort() which is
setting the SB_RDONLY flag but missing panic because errno has not been
recorded.
jbd2_journal_commit_transaction()
jbd2_journal_abort()
journal->j_flags |= JBD2_ABORT;
jbd2_journal_update_sb_errno()
| ext4_journal_check_start()
| __ext4_abort()
| sb->s_flags |= SB_RDONLY;
| if (!JBD2_REC_ERR)
| return;
journal->j_flags |= JBD2_REC_ERR;
Finally, it will no longer trigger panic because the filesystem has
already been set read-only. Fix this by introduce j_abort_mutex to make
sure journal abort is completed before panic, and remove JBD2_REC_ERR
flag.
Fixes: 4327ba52af ("ext4, jbd2: ensure entering into panic after recording an error in superblock")
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200609073540.3810702-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
* Fix performance problems found in dioread_nolock now that it is the
default, caused by transaction leaks.
* Clean up fiemap handling in ext4
* Clean up and refactor multiple block allocator (mballoc) code
* Fix a problem with mballoc with a smaller file systems running out
of blocks because they couldn't properly use blocks that had been
reserved by inode preallocation.
* Fixed a race in ext4_sync_parent() versus rename()
* Simplify the error handling in the extent manipulation code
* Make sure all metadata I/O errors are felected to ext4_ext_dirty()'s and
ext4_make_inode_dirty()'s callers.
* Avoid passing an error pointer to brelse in ext4_xattr_set()
* Fix race which could result to freeing an inode on the dirty last
in data=journal mode.
* Fix refcount handling if ext4_iget() fails
* Fix a crash in generic/019 caused by a corrupted extent node
-----BEGIN PGP SIGNATURE-----
iQEyBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAl7Ze8kACgkQ8vlZVpUN
gaNChAf4xn0ytFSrweI/S2Sp05G/2L/ocZ2TZZk2ZdGeN1E+ABdSIv/zIF9zuFgZ
/pY/C+fyEZWt4E3FlNO8gJzoEedkzMCMnUhSIfI+wZbcclyTOSNMJtnrnJKAEtVH
HOvGZJmg357jy407RCGhZpJ773nwU2xhBTr5OFxvSf9mt/vzebxIOnw5D7HPlC1V
Fgm6Du8q+tRrPsyjv1Yu4pUEVXMJ7qUcvt326AXVM3kCZO1Aa5GrURX0w3J4mzW1
tc1tKmtbLcVVYTo9CwHXhk/edbxrhAydSP2iACand3tK6IJuI6j9x+bBJnxXitnr
vsxsfTYMG18+2SxrJ9LwmagqmrRq
=HMTs
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"A lot of bug fixes and cleanups for ext4, including:
- Fix performance problems found in dioread_nolock now that it is the
default, caused by transaction leaks.
- Clean up fiemap handling in ext4
- Clean up and refactor multiple block allocator (mballoc) code
- Fix a problem with mballoc with a smaller file systems running out
of blocks because they couldn't properly use blocks that had been
reserved by inode preallocation.
- Fixed a race in ext4_sync_parent() versus rename()
- Simplify the error handling in the extent manipulation code
- Make sure all metadata I/O errors are felected to
ext4_ext_dirty()'s and ext4_make_inode_dirty()'s callers.
- Avoid passing an error pointer to brelse in ext4_xattr_set()
- Fix race which could result to freeing an inode on the dirty last
in data=journal mode.
- Fix refcount handling if ext4_iget() fails
- Fix a crash in generic/019 caused by a corrupted extent node"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (58 commits)
ext4: avoid unnecessary transaction starts during writeback
ext4: don't block for O_DIRECT if IOCB_NOWAIT is set
ext4: remove the access_ok() check in ext4_ioctl_get_es_cache
fs: remove the access_ok() check in ioctl_fiemap
fs: handle FIEMAP_FLAG_SYNC in fiemap_prep
fs: move fiemap range validation into the file systems instances
iomap: fix the iomap_fiemap prototype
fs: move the fiemap definitions out of fs.h
fs: mark __generic_block_fiemap static
ext4: remove the call to fiemap_check_flags in ext4_fiemap
ext4: split _ext4_fiemap
ext4: fix fiemap size checks for bitmap files
ext4: fix EXT4_MAX_LOGICAL_BLOCK macro
add comment for ext4_dir_entry_2 file_type member
jbd2: avoid leaking transaction credits when unreserving handle
ext4: drop ext4_journal_free_reserved()
ext4: mballoc: use lock for checking free blocks while retrying
ext4: mballoc: refactor ext4_mb_good_group()
ext4: mballoc: introduce pcpu seqcnt for freeing PA to improve ENOSPC handling
ext4: mballoc: refactor ext4_mb_discard_preallocations()
...
When reserved transaction handle is unused, we subtract its reserved
credits in __jbd2_journal_unreserve_handle() called from
jbd2_journal_stop(). However this function forgets to remove reserved
credits from transaction->t_outstanding_credits and thus the transaction
space that was reserved remains effectively leaked. The leaked
transaction space can be quite significant in some cases and leads to
unnecessarily small transactions and thus reducing throughput of the
journalling machinery. E.g. fsmark workload creating lots of 4k files
was observed to have about 20% lower throughput due to this when ext4 is
mounted with dioread_nolock mount option.
Subtract reserved credits from t_outstanding_credits as well.
CC: stable@vger.kernel.org
Fixes: 8f7d89f368 ("jbd2: transaction reservation support")
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200520133119.1383-3-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The argument isn't used by any caller, and drivers don't fill out
bi_sector for flush requests either.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Improve comments in jbd2_journal_commit_transaction() to describe why
we don't need to clear the buffer_mapped bit for freeing file mapping
buffers whose page mapping is NULL.
Link: https://lore.kernel.org/r/20200217112706.20085-1-yi.zhang@huawei.com
Fixes: c96dceeabf ("jbd2: do not clear the BH_Mapped flag when forgetting a metadata buffer")
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
journal_head::b_transaction and journal_head::b_next_transaction could
be accessed concurrently as noticed by KCSAN,
LTP: starting fsync04
/dev/zero: Can't open blockdev
EXT4-fs (loop0): mounting ext3 file system using the ext4 subsystem
EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
==================================================================
BUG: KCSAN: data-race in __jbd2_journal_refile_buffer [jbd2] / jbd2_write_access_granted [jbd2]
write to 0xffff99f9b1bd0e30 of 8 bytes by task 25721 on cpu 70:
__jbd2_journal_refile_buffer+0xdd/0x210 [jbd2]
__jbd2_journal_refile_buffer at fs/jbd2/transaction.c:2569
jbd2_journal_commit_transaction+0x2d15/0x3f20 [jbd2]
(inlined by) jbd2_journal_commit_transaction at fs/jbd2/commit.c:1034
kjournald2+0x13b/0x450 [jbd2]
kthread+0x1cd/0x1f0
ret_from_fork+0x27/0x50
read to 0xffff99f9b1bd0e30 of 8 bytes by task 25724 on cpu 68:
jbd2_write_access_granted+0x1b2/0x250 [jbd2]
jbd2_write_access_granted at fs/jbd2/transaction.c:1155
jbd2_journal_get_write_access+0x2c/0x60 [jbd2]
__ext4_journal_get_write_access+0x50/0x90 [ext4]
ext4_mb_mark_diskspace_used+0x158/0x620 [ext4]
ext4_mb_new_blocks+0x54f/0xca0 [ext4]
ext4_ind_map_blocks+0xc79/0x1b40 [ext4]
ext4_map_blocks+0x3b4/0x950 [ext4]
_ext4_get_block+0xfc/0x270 [ext4]
ext4_get_block+0x3b/0x50 [ext4]
__block_write_begin_int+0x22e/0xae0
__block_write_begin+0x39/0x50
ext4_write_begin+0x388/0xb50 [ext4]
generic_perform_write+0x15d/0x290
ext4_buffered_write_iter+0x11f/0x210 [ext4]
ext4_file_write_iter+0xce/0x9e0 [ext4]
new_sync_write+0x29c/0x3b0
__vfs_write+0x92/0xa0
vfs_write+0x103/0x260
ksys_write+0x9d/0x130
__x64_sys_write+0x4c/0x60
do_syscall_64+0x91/0xb05
entry_SYSCALL_64_after_hwframe+0x49/0xbe
5 locks held by fsync04/25724:
#0: ffff99f9911093f8 (sb_writers#13){.+.+}, at: vfs_write+0x21c/0x260
#1: ffff99f9db4c0348 (&sb->s_type->i_mutex_key#15){+.+.}, at: ext4_buffered_write_iter+0x65/0x210 [ext4]
#2: ffff99f5e7dfcf58 (jbd2_handle){++++}, at: start_this_handle+0x1c1/0x9d0 [jbd2]
#3: ffff99f9db4c0168 (&ei->i_data_sem){++++}, at: ext4_map_blocks+0x176/0x950 [ext4]
#4: ffffffff99086b40 (rcu_read_lock){....}, at: jbd2_write_access_granted+0x4e/0x250 [jbd2]
irq event stamp: 1407125
hardirqs last enabled at (1407125): [<ffffffff980da9b7>] __find_get_block+0x107/0x790
hardirqs last disabled at (1407124): [<ffffffff980da8f9>] __find_get_block+0x49/0x790
softirqs last enabled at (1405528): [<ffffffff98a0034c>] __do_softirq+0x34c/0x57c
softirqs last disabled at (1405521): [<ffffffff97cc67a2>] irq_exit+0xa2/0xc0
Reported by Kernel Concurrency Sanitizer on:
CPU: 68 PID: 25724 Comm: fsync04 Tainted: G L 5.6.0-rc2-next-20200221+ #7
Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019
The plain reads are outside of jh->b_state_lock critical section which result
in data races. Fix them by adding pairs of READ|WRITE_ONCE().
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Qian Cai <cai@lca.pw>
Link: https://lore.kernel.org/r/20200222043111.2227-1-cai@lca.pw
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Jan Kara
Theodore Ts'o
Zhang Yi
yangerkun
Leah Rumancik
Arnd Bergmann
Christoph Hellwig
Harshad Shirwadkar
Mauro Carvalho Chehab
changfengnan
Mauricio Faria de Oliveira
Shijie Luo
Xianting Tian
Lukas Czerner
Linus Torvalds
Qian Cai
wangyan