Several existing dprink()/dfprintk() calls were converted to use the new
mount API logging macros by commit ce8866f091 ("NFS: Attach
supplementary error information to fs_context"). If the fs_context was
not created using fsopen() then it will not have had a log buffer
allocated for it, and the new mount API logging macros will wind up
calling printk().
This can result in syslog messages being logged where previously there
were none... most notably "NFS4: Couldn't follow remote path", which can
happen if the client is auto-negotiating a protocol version with an NFS
server that doesn't support the higher v4.x versions.
Convert the nfs_errorf(), nfs_invalf(), and nfs_warnf() macros to check
for the existence of the fs_context's log buffer and call dprintk() if
it doesn't exist. Add nfs_ferrorf(), nfs_finvalf(), and nfs_warnf(),
which do the same thing but take an NFS debug flag as an argument and
call dfprintk(). Finally, modify the "NFS4: Couldn't follow remote
path" message to use nfs_ferrorf().
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=207385
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Fixes: ce8866f091 ("NFS: Attach supplementary error information to fs_context.")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
When returning the layout in nfs4_evict_inode(), we need to ensure that
the layout is actually done being freed before we can proceed to free the
inode itself.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
NFS_FS=y as dependency of CONFIG_NFSD_V4_2_INTER_SSC still have
build errors and some configs with NFSD=m to get NFS4ERR_STALE
error when doing inter server copy.
Added ops table in nfs_common for knfsd to access NFS client modules.
Fixes: 3ac3711adb ("NFSD: Fix NFS server build errors")
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Implement client side caching for NFSv4.2 extended attributes. The cache
is a per-inode hashtable, with name/value entries. There is one special
entry for the listxattr cache.
NFS inodes have a pointer to a cache structure. The cache structure is
allocated on demand, freed when the cache is invalidated.
Memory shrinkers keep the size in check. Large entries (> PAGE_SIZE)
are collected by a separate shrinker, and freed more aggressively
than others.
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Split out from commit "NFS: Add fs_context support."
Add wrappers nfs_errorf(), nfs_invalf(), and nfs_warnf() which log error
information to the fs_context. Convert some printk's to use these new
wrappers instead.
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Split out from commit "NFS: Add fs_context support."
This patch adds additional refactoring for the conversion of NFS to use
fs_context, namely:
(*) Merge nfs_mount_info and nfs_clone_mount into nfs_fs_context.
nfs_clone_mount has had several fields removed, and nfs_mount_info
has been removed altogether.
(*) Various functions now take an fs_context as an argument instead
of nfs_mount_info, nfs_fs_context, etc.
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Add filesystem context support to NFS, parsing the options in advance and
attaching the information to struct nfs_fs_context. The highlights are:
(*) Merge nfs_mount_info and nfs_clone_mount into nfs_fs_context. This
structure represents NFS's superblock config.
(*) Make use of the VFS's parsing support to split comma-separated lists
(*) Pin the NFS protocol module in the nfs_fs_context.
(*) Attach supplementary error information to fs_context. This has the
downside that these strings must be static and can't be formatted.
(*) Remove the auxiliary file_system_type structs since the information
necessary can be conveyed in the nfs_fs_context struct instead.
(*) Root mounts are made by duplicating the config for the requested mount
so as to have the same parameters. Submounts pick up their parameters
from the parent superblock.
[AV -- retrans is u32, not string]
[SM -- Renamed cfg to ctx in a few functions in an earlier patch]
[SM -- Moved fs_context mount option parsing to an earlier patch]
[SM -- Moved fs_context error logging to a later patch]
[SM -- Fixed printks in nfs4_try_get_tree() and nfs4_get_referral_tree()]
[SM -- Added is_remount_fc() helper]
[SM -- Deferred some refactoring to a later patch]
[SM -- Fixed referral mounts, which were broken in the original patch]
[SM -- Fixed leak of nfs_fattr when fs_context is freed]
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Rename struct nfs_parsed_mount_data to struct nfs_fs_context and rename
pointers to it to "ctx". At some point this will be pointed to by an
fs_context struct's fs_private pointer.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
it's always either nfs_set_sb_security() or nfs_clone_sb_security(),
the choice being controlled by mount_info->cloned != NULL. No need
to add methods, especially when both instances live right next to
the caller and are never accessed anywhere else.
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The only possible values are nfs_fill_super and nfs_clone_super. The
latter is used only when crossing into a submount and it is almost
identical to the former; the only differences are
* ->s_time_gran unconditionally set to 1 (even for v2 mounts).
Regression dating back to 2012, actually.
* ->s_blocksize/->s_blocksize_bits set to that of parent.
Rather than messing with the method, stash ->s_blocksize_bits in
mount_info in submount case and after the (now unconditional)
call of nfs_fill_super() override ->s_blocksize/->s_blocksize_bits
if that has been set.
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
pick it from mount_info
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
they are identical now...
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
That will allow to get rid of passing those references around in
quite a few places. Moreover, that will allow to merge xdev and
remote file_system_type.
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
nothing in it will be looking at that thing anyway
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
They are identical now.
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Do that (fhandle allocation, setting struct server up) in
nfs4_referral_mount() and nfs4_try_mount() resp. and pass the
server and pointer to mount_info into nfs_do_root_mount() so that
nfs4_remote_referral_mount()/nfs_remote_mount() could be merged.
Since we are moving stuff from ->mount() instances to the points
prior to vfs_kern_mount() that would trigger those, we need to
make sure that do_nfs_root_mount() will do the corresponding
cleanup itself if it doesn't trigger those ->mount() instances.
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Allow it to take ERR_PTR() for server and return ERR_CAST() of it in
such case. All callers used to open-code that...
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Rename nfs_inode_return_delegation_noreclaim() to
nfs_inode_evict_delegation(), which better describes what it
does.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Add SPDX license identifiers to all files which:
- Have no license information of any form
- Have MODULE_LICENCE("GPL*") inside which was used in the initial
scan/conversion to ignore the file
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This file is only used internally to the NFS v4 module, so it doesn't
need to be in the global include path. I also renamed it from
nfs_idmap.h to nfs4idmap.h to emphasize that it's an NFSv4-only include
file.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Pull backing device changes from Jens Axboe:
"This contains a cleanup of how the backing device is handled, in
preparation for a rework of the life time rules. In this part, the
most important change is to split the unrelated nommu mmap flags from
it, but also removing a backing_dev_info pointer from the
address_space (and inode), and a cleanup of other various minor bits.
Christoph did all the work here, I just fixed an oops with pages that
have a swap backing. Arnd fixed a missing export, and Oleg killed the
lustre backing_dev_info from staging. Last patch was from Al,
unexporting parts that are now no longer needed outside"
* 'for-3.20/bdi' of git://git.kernel.dk/linux-block:
Make super_blocks and sb_lock static
mtd: export new mtd_mmap_capabilities
fs: make inode_to_bdi() handle NULL inode
staging/lustre/llite: get rid of backing_dev_info
fs: remove default_backing_dev_info
fs: don't reassign dirty inodes to default_backing_dev_info
nfs: don't call bdi_unregister
ceph: remove call to bdi_unregister
fs: remove mapping->backing_dev_info
fs: export inode_to_bdi and use it in favor of mapping->backing_dev_info
nilfs2: set up s_bdi like the generic mount_bdev code
block_dev: get bdev inode bdi directly from the block device
block_dev: only write bdev inode on close
fs: introduce f_op->mmap_capabilities for nommu mmap support
fs: kill BDI_CAP_SWAP_BACKED
fs: deduplicate noop_backing_dev_info
bdi_destroy already does all the work, and if we delay freeing the
anon bdev we can get away with just that single call.
Addintionally remove the call during mount failure, as
deactivate_super_locked will already call ->kill_sb and clean up
the bdi for us.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
Reclaim will be leaving shadow entries in the page cache radix tree upon
evicting the real page. As those pages are found from the LRU, an
iput() can lead to the inode being freed concurrently. At this point,
reclaim must no longer install shadow pages because the inode freeing
code needs to ensure the page tree is really empty.
Add an address_space flag, AS_EXITING, that the inode freeing code sets
under the tree lock before doing the final truncate. Reclaim will check
for this flag before installing shadow pages.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Minchan Kim <minchan@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Bob Liu <bob.liu@oracle.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Luigi Semenzato <semenzato@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Metin Doslu <metin@citusdata.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Ozgun Erdogan <ozgun@citusdata.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Roman Gushchin <klamm@yandex-team.ru>
Cc: Ryan Mallon <rmallon@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
nfs4_write_inode() must not be allowed to exit until the layoutcommit
is done. That means that both NFS_INO_LAYOUTCOMMIT and
NFS_INO_LAYOUTCOMMITTING have to be cleared.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Use 'PTR_ERR_OR_ZERO()' rather than 'IS_ERR(...) ? PTR_ERR(...) : 0'.
Signed-off-by: Geyslan G. Bem <geyslan@gmail.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
NFSv4 security auto-negotiation has been broken since
commit 4580a92d44 (NFS:
Use server-recommended security flavor by default (NFSv3))
because nfs4_try_mount() will automatically select AUTH_SYS
if it sees no auth flavours.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Chuck Lever <chuck.lever@oracle.com>
What is the point of having a 'auth_flavor_len' field, if it is
always set to 1, and can't be used to determine if the user has
selected an auth flavour?
This cleanup goes back to using auth_flavor_len for its original
intended purpose, and gets rid of the ad-hoc replacements.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The other protocols don't use it, so make it local to NFSv4, and
remove the EXPORT.
Also ensure that we only compile in cache_lib.o if we're using
the legacy DNS resolver.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Bryan Schumaker <bjschuma@netapp.com>
Since commit ec88f28d in 2009, checking if the user-specified flavor
is in the server's flavor list has been the source of a few
noticeable regressions (now fixed), but there is one that is still
vexing.
An NFS server can list AUTH_NULL in its flavor list, which suggests
a client should try to mount the server with the flavor of the
client's choice, but the server will squash all accesses. In some
cases, our client fails to mount a server because of this check,
when the mount could have proceeded successfully.
Skip this check if the user has specified "sec=" on the mount
command line. But do consult the server-provided flavor list to
choose a security flavor if no sec= option is specified on the mount
command.
If a server lists Kerberos pseudoflavors before "sys" in its export
options, our client now chooses Kerberos over AUTH_UNIX for mount
points, when no security flavor is specified by the mount command.
This could be surprising to some administrators or users, who would
then need to have Kerberos credentials to access the export.
Or, a client administrator may not have enabled rpc.gssd. In this
case, auth_rpcgss.ko might still be loadable, which is enough for
the new logic to choose Kerberos over AUTH_UNIX. But the mount
would fail since no GSS context can be created without rpc.gssd
running.
To retain the use of AUTH_UNIX by default:
o The server administrator can ensure that "sys" is listed before
Kerberos flavors in its export security options (see
exports(5)),
o The client administrator can explicitly specify "sec=sys" on
its mount command line (see nfs(5)),
o The client administrator can use "Sec=sys" in an appropriate
section of /etc/nfsmount.conf (see nfsmount.conf(5)), or
o The client administrator can blacklist auth_rpcgss.ko.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The following set of operations on a NFS client and server will cause
server# mkdir a
client# cd a
server# mv a a.bak
client# sleep 30 # (or whatever the dir attrcache timeout is)
client# stat .
stat: cannot stat `.': Stale NFS file handle
Obviously, we should not be getting an ESTALE error back there since the
inode still exists on the server. The problem is that the lookup code
will call d_revalidate on the dentry that "." refers to, because NFS has
FS_REVAL_DOT set.
nfs_lookup_revalidate will see that the parent directory has changed and
will try to reverify the dentry by redoing a LOOKUP. That of course
fails, so the lookup code returns ESTALE.
The problem here is that d_revalidate is really a bad fit for this case.
What we really want to know at this point is whether the inode is still
good or not, but we don't really care what name it goes by or whether
the dcache is still valid.
Add a new d_op->d_weak_revalidate operation and have complete_walk call
that instead of d_revalidate. The intent there is to allow for a
"weaker" d_revalidate that just checks to see whether the inode is still
good. This is also gives us an opportunity to kill off the FS_REVAL_DOT
special casing.
[AV: changed method name, added note in porting, fixed confusion re
having it possibly called from RCU mode (it won't be)]
Cc: NeilBrown <neilb@suse.de>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Some systems have a modprobe.d/nfs.conf file that sets an nfs4 alias
pointing to nfs.ko, rather than nfs4.ko. This can prevent the v4 module
from loading on mount, since the kernel sees that something named "nfs4"
has already been loaded. To work around this, I've renamed the modules
to "nfsv2.ko" "nfsv3.ko" and "nfsv4.ko".
I also had to move the nfs4_fs_type back to nfs.ko to ensure that `mount
-t nfs4` still works.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This patch exports symbols needed by the v4 module. In addition, I also
switch over to using IS_ENABLED() to check if CONFIG_NFS_V4 or
CONFIG_NFS_V4_MODULE are set.
The module (nfs4.ko) will be created in the same directory as nfs.ko and
will be automatically loaded the first time you try to mount over NFS v4.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Somehow I missed this in my previous patch series, but these functions
are only needed by the v4 code and should be moved to a v4-only file. I
wasn't exactly sure where I should put these functions, so I moved them
into nfs4super.c where I could make them static.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
I can set all variables in the nfs_fill_super() function, allowing me to
remove the nfs4_fill_super() function.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
v2 and v4 don't use it, so I create two new nfs_rpc_ops functions to
initialize the ACL client only when we are using v3.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
I'm already looking up the nfs subversion in nfs_fs_mount(), so I have
easy access to rpc_ops that used to be difficult to reach. This allows
me to set up a different mount path for NFS v2/3 and NFS v4.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
I can now share this code with the v2 and v3 code by using the NFS
subversion structure.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This patch adds in the code to track multiple versions of the NFS
protocol. I created default structures for v2, v3 and v4 so that each
version can continue to work while I convert them into kernel modules.
I also removed the const parameter from the rpc_version array so that I
can change it at runtime.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
... yet. Right now, init_nfs() is calling this function if an error is
encountered when loading the nfs module. An __exit function can't be
called from one declared as __init.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This allows me to move the v4 mounting and unmounting functions out of
the generic client and into a file that is only compiled when CONFIG_NFS_V4
is enabled.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
And split them out of the generic client into their own file.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
I want to initialize all of NFS v4 in a single function that will
eventually be used as the v4 module init function.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Scott Mayhew
Trond Myklebust
Dai Ngo
Frank van der Linden
David Howells
Al Viro
Thomas Gleixner
Anna Schumaker
Trond Myklebust
Linus Torvalds
Peng Tao
Christoph Hellwig
Johannes Weiner
Geyslan G. Bem
Trond Myklebust
Chuck Lever
Jeff Layton
bjschuma@gmail.com
Bryan Schumaker