Граф коммитов

127 Коммитов

Автор SHA1 Сообщение Дата
Linus Torvalds fcba914542 ARM: arm-soc platform updates for 3.10, part 3
This is the third and smallest of the SoC specific updates.
 Changes include:
 
 * SMP support for the Xilinx zynq platform
 * Smaller imx changes
 * LPAE support for mvebu
 * Moving the orion5x, kirkwood, dove and mvebu platforms
   to a common "mbus" driver for their internal devices.
 
 It would be good to get feedback on the location of the "mbus"
 driver. Since this is used on multiple platforms may potentially
 get shared with other architectures (powerpc and arm64), it
 was moved to drivers/bus/. We expect other similar drivers to
 get moved to the same place in order to avoid creating more
 top-level directories under drivers/ or cluttering up the
 messy drivers/misc/ even more.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUYgifmCrR//JCVInAQLZ6A//VD38ocUx9RPC8rOgrkzQxcMTh3wFghoA
 BVvS8fcAmhZYA5+GpTYBm+5XH2Jvu6Pv0hrba8TOeEhyZJxiWA6vg0cWWmnvZLDC
 Q0uubhqIhv32I2Oq4uJb/VyzcCrQFrnjhw9HHphy7YlGKKBUFWrbgTaOypwbgXr9
 DnB7u04DvaKcUjZb4Y0HaUDM7qWMFDPbKKF5WMZPqjocnjsiBQ2JMw+2KByliWR3
 mCI+FdickpDYSVp9V9iRM6F73cItknjZIzQs1RYg/GSuPSWkWTdfzE1Blk/561Fo
 QDrNDhnXHlt+bmQRKGWel2gDWBZW47Wj+XkjGpWDFh+e/l3vNJq0hrzXizuRCLSw
 /2VefXyd3jNj8UWL3+GCA4dnw8fx14dgfNJ2iu7kg6l4ggwpJ05ToxabkLFlTRwy
 LloDFjswiTBi75YdQRQCV/95NIxvIQIkbytPrk5zQWVwg8ZXoicgzRRUL5gifLh+
 WE+zaY/A5e1fXN/XS70hvbp2ROZtfGOdunUR9XFR8KNqDoJDlqtrlV3Pjh75YY8G
 JUmCKQjzfubr5WHskPBGCtsSb1455MEIFVANEtlJyOEKp6ytXfpVvrrZtAvmD6Ep
 07dOqOgflnuZPk7H0JOf7mTf9L+fmNp4ubjRqcs9ZfPsEGoQFqBtpLF6JQbxUYGd
 j69lW3jEM3o=
 =rQsu
 -----END PGP SIGNATURE-----

Merge tag 'soc-for-linus-3' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates (part 3) from Arnd Bergmann:
 "This is the third and smallest of the SoC specific updates.  Changes
  include:

   - SMP support for the Xilinx zynq platform
   - Smaller imx changes
   - LPAE support for mvebu
   - Moving the orion5x, kirkwood, dove and mvebu platforms to a common
     "mbus" driver for their internal devices.

  It would be good to get feedback on the location of the "mbus" driver.
  Since this is used on multiple platforms may potentially get shared
  with other architectures (powerpc and arm64), it was moved to
  drivers/bus/.  We expect other similar drivers to get moved to the
  same place in order to avoid creating more top-level directories under
  drivers/ or cluttering up the messy drivers/misc/ even more."

* tag 'soc-for-linus-3' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (50 commits)
  ARM: imx: reset_controller may be disabled
  ARM: mvebu: Align the internal registers virtual base to support LPAE
  ARM: mvebu: Limit the DMA zone when LPAE is selected
  arm: plat-orion: remove addr-map code
  arm: mach-mv78xx0: convert to use the mvebu-mbus driver
  arm: mach-orion5x: convert to use mvebu-mbus driver
  arm: mach-dove: convert to use mvebu-mbus driver
  arm: mach-kirkwood: convert to use mvebu-mbus driver
  arm: mach-mvebu: convert to use mvebu-mbus driver
  ARM i.MX53: set CLK_SET_RATE_PARENT flag on the tve_ext_sel clock
  ARM i.MX53: tve_di clock is not part of the CCM, but of TVE
  ARM i.MX53: make tve_ext_sel propagate rate change to PLL
  ARM i.MX53: Remove unused tve_gate clkdev entry
  ARM i.MX5: Remove tve_sel clock from i.MX53 clock tree
  ARM: i.MX5: Add PATA and SRTC clocks
  ARM: imx: do not bring up unavailable cores
  ARM: imx: add initial imx6dl support
  ARM: imx1: mm: add call to mxc_device_init
  ARM: imx_v4_v5_defconfig: Add CONFIG_GPIO_SYSFS
  ARM: imx_v6_v7_defconfig: Select CONFIG_PERF_EVENTS
  ...
2013-05-07 11:02:18 -07:00
Linus Torvalds 150a8dcf10 ARM: arm-soc board specific changes for 3.10, part 1
These changes are all for board specific files. These used to make up a
 large portion of the ARM changes in the past, but as we are generalizing
 the support and moving to device tree probing, this has gotten
 significantly smaller. The only platform actually adding new code here
 at the moment is Renesas shmobile, as they are still busy converting
 their code to device tree and have not come far enough to not need it.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRhKYeAAoJEIwa5zzehBx3ez8QAKLnzjAQJzhfJezJ+g02tXS9
 xIikiX1zmEb3HuF8Z/SFRWVj2Zbe+cBaDpr7JERmmOTWWUtxHbqIPFr2xUbyi0qY
 d1yBFEtAv+Pf6lgIGRHPejCXigInp0ew94+VMih7rOVkXdNZqLBP+Z4CEntoak+H
 1+c4MvW/37VlyQUnsrQgUcC7mu9lSIVwJjYXCGJVs4cKwYYnLNH6tLINx62SOCkW
 cdoJV/eTvRWD6Wx8kxvNE7WJMVNuB8e7R7DKkn5SES9beWJ1tvcGtNS2KaK8rFdC
 Xee8SNo2RzxDQwtkPYA2iZg9Gs3vxNEiy3AX0Tsvji7a3ipQk/M13NlOa1h+tu4w
 8wNZDccYOsFejlnpnDWk64eVmu2w0c58CWbRaPYOOkGJ5pTnZ9+2cO7CLTOmQWrb
 y2Vdly10vQR7AbnlgLlx9RuIAdAVoMGVwCO1JrnBonRriXQCq/vSEFfhKbLK4/MO
 FYyW+sy222f+kv1JrEdffO7rdIc/EdHRkiGSeVFQ63ETl6F+wx7zEMwb+RV2ysi3
 zQQJDeMTrP9StqKaBfyOS3IF+Jbv/f4dM6oKxwlyR5kwuO+J1H6yFG3ugBSuED82
 eUz1O35Q1JY593qS8XD22wMjRQt3xhwdrD0hAZnCbUiJxe1Tatf16bBloBQ8vwsY
 hHdiINWICRawVJLK7SZB
 =2cfP
 -----END PGP SIGNATURE-----

Merge tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC board specific changes (part 1) from Olof Johansson:
 "These changes are all for board specific files.  These used to make up
  a large portion of the ARM changes in the past, but as we are
  generalizing the support and moving to device tree probing, this has
  gotten significantly smaller.

  The only platform actually adding new code here at the moment is
  Renesas shmobile, as they are still busy converting their code to
  device tree and have not come far enough to not need it."

* tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (43 commits)
  ARM: msm: USB_MSM_OTG needs USB_PHY
  ARM: davinci: da850 evm: fix const qualifier placement
  ARM: davinci: da850 board: add remoteproc support
  ARM: pxa: move debug uart code
  ARM: pxa: select PXA935 on saar & tavorevb
  ARM: mmp: add more compatible names in gpio driver
  ARM: pxa: move PXA_GPIO_TO_IRQ macro
  ARM: pxa: remove cpu_is_xxx in gpio driver
  ARM: Kirkwood: update Network Space Mini v2 description
  ARM: Kirkwood: DT board setup for CloudBox
  ARM: Kirkwood: sort board entries by ASCII-code order
  ARM: OMAP: board-4430sdp: Provide regulator to pwm-backlight
  ARM: OMAP: zoom: Use pwm stack for lcd and keyboard backlight
  ARM: OMAP2+: omap2plus_defconfig: Add support for BMP085 pressure sensor
  omap2+: Remove useless Makefile line
  omap2+: Remove useless Makefile line
  ARM: OMAP: RX-51: add missing regulator supply definitions for lis3lv02d
  ARM: OMAP1: fix omap_udc registration
  ARM: davinci: use is IS_ENABLED macro
  ARM: kirkwood: add MACH_GURUPLUG_DT to defconfig
  ...
2013-05-04 12:34:30 -07:00
Linus Torvalds 8546dc1d4b Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-arm
Pull ARM updates from Russell King:
 "The major items included in here are:

   - MCPM, multi-cluster power management, part of the infrastructure
     required for ARMs big.LITTLE support.

   - A rework of the ARM KVM code to allow re-use by ARM64.

   - Error handling cleanups of the IS_ERR_OR_NULL() madness and fixes
     of that stuff for arch/arm

   - Preparatory patches for Cortex-M3 support from Uwe Kleine-König.

  There is also a set of three patches in here from Hugh/Catalin to
  address freeing of inappropriate page tables on LPAE.  You already
  have these from akpm, but they were already part of my tree at the
  time he sent them, so unfortunately they'll end up with duplicate
  commits"

* 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (77 commits)
  ARM: EXYNOS: remove unnecessary use of IS_ERR_VALUE()
  ARM: IMX: remove unnecessary use of IS_ERR_VALUE()
  ARM: OMAP: use consistent error checking
  ARM: cleanup: OMAP hwmod error checking
  ARM: 7709/1: mcpm: Add explicit AFLAGS to support v6/v7 multiplatform kernels
  ARM: 7700/2: Make cpu_init() notrace
  ARM: 7702/1: Set the page table freeing ceiling to TASK_SIZE
  ARM: 7701/1: mm: Allow arch code to control the user page table ceiling
  ARM: 7703/1: Disable preemption in broadcast_tlb*_a15_erratum()
  ARM: mcpm: provide an interface to set the SMP ops at run time
  ARM: mcpm: generic SMP secondary bringup and hotplug support
  ARM: mcpm_head.S: vlock-based first man election
  ARM: mcpm: Add baremetal voting mutexes
  ARM: mcpm: introduce helpers for platform coherency exit/setup
  ARM: mcpm: introduce the CPU/cluster power API
  ARM: multi-cluster PM: secondary kernel entry code
  ARM: cacheflush: add synchronization helpers for mixed cache state accesses
  ARM: cpu hotplug: remove majority of cache flushing from platforms
  ARM: smp: flush L1 cache in cpu_die()
  ARM: tegra: remove tegra specific cpu_disable()
  ...
2013-05-03 09:13:19 -07:00
Russell King 946342d03e Merge branches 'devel-stable', 'entry', 'fixes', 'mach-types', 'misc' and 'smp-hotplug' into for-linus 2013-05-02 21:30:36 +01:00
Arnd Bergmann 56b690481c Merge branch 'samsung/exynos-multiplatform' into next/multiplatform
These patches get us closer to adding multiplatform support on
the Exynos platform, they are part of a longer series of
patches.  This would get all the simple stuff out of the
way, and I don't think there is a big risk of introducing
regressions with these.

A lot of the other patches have already been merged into
subsystem trees. After this series in in arm-soc, what is
left comes down to

* The ASoC conversion to dmaengine won't make it unless someone
  who knows that code better steps up to do it right away. This
  means that we won't have audio in a 3.10 multiplatform kernel
  on Exynos, but it will still work for users that don't enable
  multiplatform.

* The irqchip (combiner), clk and clksource patches are all based
  on top   of other changesets we pulled in from your trees, so I
  would not make them part of the next/multiplatform branch. We can
  apply them on top of the next/drivers branch once they are
  tested successfully.

* A trivial patch is needed in the end to actually make
  CONFIG_ARCH_EXYNOS visible in multiplatform configurations.
  We will do that as a separate patch once everything else is
  there.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-19 14:33:09 +02:00
Arnd Bergmann a2e4071047 ARM: exynos: move debug-macro.S to include/debug/
The move is necessary to support early debug output on exynos
with multiplatform configurations. This implies also moving the
plat/debug-macro.S file, but we are leaving the remaining users of that
file in place, to avoid adding large numbers of extra configuration
options to Kconfig.debug

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-19 13:51:21 +02:00
Shawn Guo 3c03a2fed6 ARM: imx: add initial imx6dl support
The i.MX6 DualLite/Solo is another i.MX6 family SoC, which is highly
compatible with i.MX6 Quad/Dual.  And that's why we choose to support
it using imx6q code with cpu_is_imx6dl() check when necessary.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-12 19:28:15 +08:00
Haojian Zhuang 0a43cd3b1c ARM: pxa: move debug uart code
Move debug uart code from mach-pxa/mach-mmp to debug directory.
Since they are similar, merge them together.

Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Acked-by: Eric Mico <eric.y.miao@gmail.com>
2013-04-11 10:02:31 +08:00
Arnd Bergmann d93bea007a The mxs multiplatform support for 3.10:
* It enables the multiplatform build for mach-mxs platform.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJRYoD8AAoJEFBXWFqHsHzOM40H/iwJ8kf/xWXrSKstVwszLV/U
 Q0hCvUQ0lp+IvywJi+yDD+X/TCFE4lDGY0nDo5ucQouMtfVUk1DfZEjFCYQRN4q8
 32fqQbeBGKwMd0I2f/jCiRRfZlWmpYU6x1j+sFNpJmjUoD92cVByjOQzFvrO9SSM
 LasJUAs9ujDTXfc+/eekG8PCeCweE0cZaKJtingyEF+Ri5kNEnF/1ZmadVuVukgY
 8pND1jYVTOfhdyBgYFhJIFK1xuaGX5CjJTokn86Ue8d6VqPAA/q2eD1PdHkIKZ39
 erOwCuizplU8Nce9cJpAQDz73I4Cxs2qG8UPcqErvLhZNttOw52pYPvhXZXojG8=
 =IJY6
 -----END PGP SIGNATURE-----

Merge tag 'mxs-multiplatform-3.10' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/multiplatform

From Shawn Guo <shawn.guo@linaro.org>:

The mxs multiplatform support for 3.10:

* It enables the multiplatform build for mach-mxs platform.

* tag 'mxs-multiplatform-3.10' of git://git.linaro.org/people/shawnguo/linux-2.6:
  ARM: mxs: enable multiplatform build
  ARM: mxs: rename debug-macro.S for multiplatform build
  ARM: mxs: call mxs_pm_init() as a machine_desc hook

Conflicts:
	arch/arm/Kconfig.debug

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-09 16:02:41 +02:00
Arnd Bergmann 71f6424023 Merge branch 'mxs/cleanup' into next/multiplatform
This is a dependency for mxs/multiplatform

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Conflicts:
	drivers/clocksource/Makefile
2013-04-09 16:02:14 +02:00
Arnd Bergmann 9bc128e16b Merge tag 'ux500-multiplatform-asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/multiplatform
From Linus Walleij <linus.walleij@linaro.org>:

Ux500 multiplatform support.  This tag builds upon the MFD-specific base
tag "ux500-multiplatform-mfd". This removes all <mach/*> dependencies
and makes the ux500 fully multi-platform.

* tag 'ux500-multiplatform-asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
  ARM: ux500: build hotplug.o for ARMv7-a
  ARM: ux500: move to multiplatform
  ARM: ux500: make remaining headers local
  ARM: ux500: make irqs.h local to platform
  ARM: ux500: get rid of <mach/[hardware|db8500-regs].h>
  staging: ste_rmi4: kill platform_data hack
  ARM: ux500: move mach/msp.h to <linux/platform_data/*>
  clk: ux500: pass clock base adresses in init call
  ARM: ux500: make debug macro stand-alone
  ARM: ux500: move debugmacro to debug includes
  ARM: ux500: split out prcmu initialization
  mfd: db8500-prcmu: drop unused includes
  ARM: ux500: move PM-related PRCMU functions to machine
  mfd: db8500-prcmu: get base address from resource
  mfd: prcmu: pass a base and size with the early initcall

Conflicts:
	arch/arm/Kconfig

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-09 16:01:52 +02:00
Arnd Bergmann 835f9c38bb Linux 3.9-rc3
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQEcBAABAgAGBQJRRkrbAAoJEHm+PkMAQRiGy3oH/jrbHinYs0auurANgx4TdtWT
 /WNajstKBqLOJJ6cnTR7sOqwOVlptt65EbbTs+qGyZ2Z2W/Lg0BMenHvNHo4ER8C
 e7UbMdBCSLKBjAMKh1XCoZscGv4Exm8WRH3Vc5yP0Hafj3EzSAVLY1dta9WKKoQi
 bh7D1ErUlbU1zczA1w5YbPF0LqFKRvyZOwebMCCAKAxv5wWAxmbcPNxVR4sufkjg
 k6TkQ2ysgWivZAfy3tJYOcxiEu7ahpZVEuYdlZEJQXHRQUfoNljQlOp4BqKsYUai
 5A0kaf2VpKay/7pkhvTfBBcF/jFJ68pYP6gQ2ThNdr0b5kOiAfMWj030Xyngnhg=
 =iO9t
 -----END PGP SIGNATURE-----

Merge tag 'v3.9-rc3' into next/multiplatform

Linux 3.9-rc3

Conflicts:
	arch/arm/Kconfig
	arch/arm/mach-spear/spear3xx.c
	arch/arm/plat-spear/Kconfig

This is a dependency for ux500/multiplatform

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-09 16:01:23 +02:00
Arnd Bergmann f5f2915158 ARM: bcm2835: convert to multi-platform
This branch (patch) converts BCM2835 to support being built into a
 multi-platform single zImage. This mostly entails a few small Kconfig
 tweaks, move the earlyprintk implementation to the standard multi-
 platform location, and deleting some unnecessary files.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRXiVWAAoJEJuNpwkmVCGc0IcP/2d37uaMyrIRqw7WnQbi0hfw
 UHIbNCTqQ7ki1qbcQlCn650ApvLZ+dU6zHBLQZ7x19RBKiW/71Zdey2/PXthFf0H
 McV25PzDmxQ7pBhUMBJ1Hmf+0HCccON2ztzNtAMDlxZ5R8Cu1MDIPBWcMxKvbD22
 /1Ut2H7X4E/nyUlavv9i++1+npU2t2ln0kgVNU9V4j+MZ0OYtOEfHnc0s9ahLYhv
 r21A6bHHpVJBbnKq+IMdm6ww94ZJaIajMOIPh9OBrXAz37BISBiIDUtV1yCgQony
 3EDmROpU9kMSayKX+djVLHsdRA9yjV7CTRevRqoBQmvd0esGoVVP2Yr5DVt6Ofyb
 OleoNXk60JqNHe1MY/wxv6Z1vOPGUpBSfDeZd7U/pI3a0yd5cveUr4blOadFIyrV
 IMt0lxTfeoaSvV0QG6Z2Rmt+mrrI/lRtADhnYAtQBB+/ulh0KWei71qa2mOsNqLJ
 K7UOpSTxt09cSKW481PhlGsofTotj1L2wCDNIy9Ajg3lFXhM2e7rls0Rbmx8/w59
 UsCtuQbiosUpKkCinwPQGw+NhyjKRSU1QFmQh/rA7af3e5cd61Rw8zyZrNjt0Uz2
 oM01RVjK5IMtBHaFYcWM5P6ao8xSjCmbTuOWwu+fDW8DN95grRaZOYvy142xwpUH
 8sVE7NEsmydvanYm5os1
 =qoMR
 -----END PGP SIGNATURE-----

Merge tag 'bcm2835-for-3.10-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi into next/multiplatform

From Stephen Warren <swarren@wwwdotorg.org>:

ARM: bcm2835: convert to multi-platform

This branch (patch) converts BCM2835 to support being built into a
multi-platform single zImage. This mostly entails a few small Kconfig
tweaks, move the earlyprintk implementation to the standard multi-
platform location, and deleting some unnecessary files.

* tag 'bcm2835-for-3.10-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi:
  ARM: bcm2835: convert to multi-platform

Conflicts:
	arch/arm/Kconfig
	arch/arm/Kconfig.debug

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-09 12:06:28 +02:00
Linus Walleij f87b95dd2e ARM: ux500: move debugmacro to debug includes
This moves the Ux500 debug macro to the debug headers to
make way for multiplatform support.

Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-08 13:59:09 +02:00
Shawn Guo e91411b44d ARM: mxs: rename debug-macro.S for multiplatform build
Rename arch/arm/mach-mxs/include/mach/debug-macro.S to
arch/arm/include/debug/mxs.S for multiplatform build.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-04 21:15:57 +08:00
Arnd Bergmann 063ab6daeb Merge branch 'prima2/multiplatform' into next/multiplatform
This series enables multiplatform support on the SIRF prima2/marco/atlas6
platform. The code was already quite tidy, so this is a relatively simple
change, and it follows similar changes we made to other ARMv7 based
platforms recently.

* prima2/multiplatform:
  ARM: sirf: enable support in multi_v7_defconfig
  ARM: sirf: enable multiplatform support
  ARM: sirf: use clocksource_of infrastructure
  ARM: sirf: move debug-macro.S to include/debug/sirf.S
  ARM: sirf: enable sparse IRQ
  ARM: sirf: move irq driver to drivers/irqchip
  ARM: sirf: fix prima2 interrupt lookup
  pinctrl: sirf: convert to linear irq domain
  clocksource: make CLOCKSOURCE_OF_DECLARE type safe
  ARM/dts: prima2: add .dtsi for atlas6 and .dts for atla6-evb board
  arm: prima2: add new SiRFatlas6 machine in common board
  ARM: smp_twd: convert to use CLKSRC_OF init
  clocksource: tegra20: use the device_node pointer passed to init
  clocksource: pass DT node pointer to init functions
  clocksource: add empty version of clocksource_of_init

Conflicts:
	arch/arm/configs/multi_v7_defconfig
	arch/arm/mach-spear/spear13xx.c
Tested-by: Barry Song <Barry.Song@csr.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-03-28 12:25:51 +01:00
Arnd Bergmann 67bdb28718 ARM: sirf: move debug-macro.S to include/debug/sirf.S
The new style ll_debug implementation for multiplatform requires the
platform glue to be in include/debug, so let's move it there to
separate the debugging logic from the platform code.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Barry Song <Baohua.Song@csr.com>
2013-03-25 12:29:40 +01:00
Shawn Guo 287939a369 ARM: imx: add dependency check for DEBUG_IMX_UART_PORT
While adding i.MX DEBUG_LL selection, commit f8c95fe (ARM: imx: support
DEBUG_LL uart port selection for all i.MX SoCs) leaves Kconfig symbol
DEBUG_IMX_UART_PORT there without any dependency check.  This results in
that everyone gets the symbol in their config, which is someting
undesirable.  Add "depends on ARCH_MXC" for the symbol to prevent that.

Reported-by: Karl Beldan <karl.beldan@gmail.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-19 13:56:05 +08:00
Arnd Bergmann b83e139caf Merge branch 'cns3xxx/multiplatform' into next/multiplatform
I've looked at all the platforms recently to see what their
state is. cns3xxx seems quite clean but not very actively
maintained. Since it is really easy to convert to multiplatform,
that's what I did here.

* cns3xxx/multiplatform:
  ARM: cns3xxx: initial DT support
  ARM: cns3xxx: enable multiplatform support
  ARM: cns3xxx: move debug_ll code to include/debug/
  ARM: cns3xxx: enable sparse IRQ support
  ARM: cns3xxx: make mach header files local

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-03-15 22:29:38 +01:00
Shawn Guo 3b4af9bc24 ARM: 7672/1: uncompress debug support for multiplatform build
Instead of giving zero support of uncompress debug for multiplatform
build, the patch turns uncompress debug into one part of DEBUG_LL
support.  When DEBUG_LL is turned on for a particular platform,
uncompress debug works too for that platform.

OMAP and Tegra are exceptions here.  OMAP low-level debug code places
data in the .data section, and that is not allowed in decompressor.
And Tegra code has reference to variable that's unavailable in
decompressor but only in kernel.  That's why Kconfig symbol
DEBUG_UNCOMPRESS controlling multiplatform uncompress debug support is
defined with !DEBUG_OMAP2PLUS_UART && !DEBUG_TEGRA_UART.

It creates arch/arm/boot/compressed/debug.S with CONFIG_DEBUG_LL_INCLUDE
included there, implements a generic putc() using those macros, which
will be built when DEBUG_UNCOMPRESS is defined.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-03-15 17:18:52 +00:00
Shawn Guo 615967b00f ARM: 7671/1: use Kconfig to select uncompress.h
Following the approach handling DEBUG_LL inclusion, the patch creates
a Kconfig symbol CONFIG_UNCOMPRESS_INCLUDE for choosing the correct
uncompress header.  For traditional build, mach/uncompress.h will be
included in arch/arm/boot/compressed/misc.c.  For multiplatform build,
debug/uncompress.h which contains a suite of empty functions will be
used.  In this way, a platform with particular uncompress.h
implementation could choose its own uncompress.h with this Kconfig
option.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-03-15 17:18:51 +00:00
Arnd Bergmann 29c9b7be75 ARM: cns3xxx: move debug_ll code to include/debug/
This is needed in order to keep debug_ll functionality on
cns3xxx working when we enable ARCH_MULTIPLATFORM.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-03-14 17:34:57 +01:00
Stephen Warren f1ac922dec ARM: bcm2835: convert to multi-platform
This allows BCM2835 be included in a kernel build that supports multiple
SoCs at once, which is useful for distro kernels.

This change:
* Moves bcm2835's debug-macro.S into ARM's include/debug/, and hooks it
  into the relevant menu.
* Moves bcm2835's Kconfig into its own directory, as seems typical for
  multi-platform conversions.
* Removes bcm2835_soc.h, and moves the content to the files where it was
  used; just one usage per define.
* Deletes some headers and Makefile.boot that aren't needed now that we
  support multi-platform.

Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2013-03-12 22:30:45 -06:00
Paul Bolle 0c52db7e68 ARM: imx: fix typo "DEBUG_IMX50_IMX53_UART"
Commit f8c95fe (ARM: imx: support DEBUG_LL uart port selection for all
i.MX SoCs) had a typo that DEBUG_IMX50_IMX53_UART should be
DEBUG_IMX53_UART.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-11 21:28:18 +08:00
Linus Walleij 266c347924 ARM: nomadik: move debugmacro to debug includes
This moves the Nomadik debug macro to the debug headers to
make way for multiplatform support.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-07 02:48:02 +01:00
Linus Torvalds bab588fcfb arm-soc: soc-specific updates
This is a larger set of new functionality for the existing SoC families,
 including:
 
 * vt8500 gains support for new CPU cores, notably the Cortex-A9 based wm8850
 * prima2 gains support for the "marco" SoC family, its SMP based cousin
 * tegra gains support for the new Tegra4 (Tegra114) family
 * socfpga now supports a newer version of the hardware including SMP
 * i.mx31 and bcm2835 are now using DT probing for their clocks
 * lots of updates for sh-mobile
 * OMAP updates for clocks, power management and USB
 * i.mx6q and tegra now support cpuidle
 * kirkwood now supports PCIe hot plugging
 * tegra clock support is updated
 * tegra USB PHY probing gets implemented diffently
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUSUyPGCrR//JCVInAQI4YA/+Nb0FaA7qMmTPuJhm7aZNfnwBcGxZ7IZp
 s2xByEl3r5zbLKlKGNGE0x7Q7ETHV4y9tohzi9ZduH2b60dMRYgII06CEmDPu6/h
 4vBap2oLzfWfs9hwpCIh7N9wNzxSj/R42vlXHhNmspHlw7cFk1yw5EeJ+ocxmZPq
 H9lyjAxsGErkZyM/xstNQ1Uvhc8XHAFSUzWrg8hvf6AVVR8hwpIqVzfIizv6Vpk6
 ryBoUBHfdTztAOrafK54CdRc7l6kVMomRodKGzMyasnBK3ZfFca3IR7elnxLyEFJ
 uPDu5DKOdYrjXC8X2dPM6kYiE41YFuqOV2ahBt9HqRe6liNBLHQ6NAH7f7+jBWSI
 eeWe84c2vFaqhAGlci/xm4GaP0ud5ZLudtiVPlDY5tYIADqLygNcx1HIt/5sT7QI
 h34LMjc4+/TGVWTVf5yRmIzTrCXZv5YoAak3UWFoM4nVBo/eYVyNLEt5g9YsfjrC
 P/GWrXJJvOCB3gAi31pgGYJzZg8K7kTTAh/dgxjqzU4f6nGRm5PBydiJe18/lWkH
 qtfNE0RbhxCi3JEBnxW48AIEndVSRbd7jf8upC/s9rPURtFSVXp4APTHVyNUKCip
 gojBxcRYtesyG/53nrwdTyiyHx6GocmWnMNZJoDo0UQEkog2dOef+StdC3zhc2Vm
 9EttcFqWJ+E=
 =PRrg
 -----END PGP SIGNATURE-----

Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC-specific updates from Arnd Bergmann:
 "This is a larger set of new functionality for the existing SoC
  families, including:

   - vt8500 gains support for new CPU cores, notably the Cortex-A9 based
     wm8850

   - prima2 gains support for the "marco" SoC family, its SMP based
     cousin

   - tegra gains support for the new Tegra4 (Tegra114) family

   - socfpga now supports a newer version of the hardware including SMP

   - i.mx31 and bcm2835 are now using DT probing for their clocks

   - lots of updates for sh-mobile

   - OMAP updates for clocks, power management and USB

   - i.mx6q and tegra now support cpuidle

   - kirkwood now supports PCIe hot plugging

   - tegra clock support is updated

   - tegra USB PHY probing gets implemented diffently"

* tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (148 commits)
  ARM: prima2: remove duplicate v7_invalidate_l1
  ARM: shmobile: r8a7779: Correct TMU clock support again
  ARM: prima2: fix __init section for cpu hotplug
  ARM: OMAP: Consolidate OMAP USB-HS platform data (part 3/3)
  ARM: OMAP: Consolidate OMAP USB-HS platform data (part 1/3)
  arm: socfpga: Add SMP support for actual socfpga harware
  arm: Add v7_invalidate_l1 to cache-v7.S
  arm: socfpga: Add entries to enable make dtbs socfpga
  arm: socfpga: Add new device tree source for actual socfpga HW
  ARM: tegra: sort Kconfig selects for Tegra114
  ARM: tegra: enable ARCH_REQUIRE_GPIOLIB for Tegra114
  ARM: tegra: Fix build error w/ ARCH_TEGRA_114_SOC w/o ARCH_TEGRA_3x_SOC
  ARM: tegra: Fix build error for gic update
  ARM: tegra: remove empty tegra_smp_init_cpus()
  ARM: shmobile: Register ARM architected timer
  ARM: MARCO: fix the build issue due to gic-vic-to-irqchip move
  ARM: shmobile: r8a7779: Correct TMU clock support
  ARM: mxs_defconfig: Select CONFIG_DEVTMPFS_MOUNT
  ARM: mxs: decrease mxs_clockevent_device.min_delta_ns to 2 clock cycles
  ARM: mxs: use apbx bus clock to drive the timers on timrotv2
  ...
2013-02-21 15:27:22 -08:00
Linus Torvalds 3298a3511f arm-soc: multiplatform support
Converting more ARM platforms to multiplatform support. This time, OMAP
 gets converted, which is a major step since this is by far the largest
 platform in terms of code size. The same thing happens to the vt8500
 platform.
 
 Conflicts include:
 * Two mach/uncompress.h files are removed, the changes made to them
   elsewhere can be discarded now.
 * Moving the OMAP4 irq_match array has context clashes with turning
   omap4_sar_ram_init into an omap_early_initcall()
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUSUyOmCrR//JCVInAQI2zRAAnDUA3ufvANykRxNIII67D0u8XAgokzx6
 hwq0ywwcQknd2aetN1khs2rY3sQ+T73CcsFzOR448YHjbWg1RCZlCzL89uUH6SdR
 Bir/NC2jYkB1vSVB7krWhZzpeHNsFfWW1bCzwJzJfNmAZp64js3sOR1kRKjMpA2z
 RGLktrFQ1JRKF/az+xnIsrleSnS2cQguPKIs5hYxPztzN/HdvbD7ZST0ttW7wqzg
 C2AA5dnWs+C++pNXyfKlN+nL1CnyLWGXbuZUejUvAxYxgtyd/gC4/aTfNi8S9RNh
 eiFTmVwl8lsWqPWx7yzyHk+p19x7ypfBgydLU/z4yC3asUJoN5jyCF6GSqzetHJB
 jpDqTp3lQzIlJPgLryq07Xe38vUeVIKvV4e8ySOsSBlKr6aRl5684HJSCAZR9SFa
 qzHavusA5JZJKf+94UbDCPNzSqzMQYnILA039M8ekvrMZhFG89St0+NLDaxVQfO/
 OrTEnwth/TJBKvOUPIuamjZzHH/RiGkumWiKrEGKOlpwHPGtdglQeziJFo8pNkwR
 hjtnwn4RPPK8FIl59fERFI1hRvhUlwuhYcA2R/WTjcZw2d+jwZPzhhun37dLMVlw
 fk5lhz0GBaRUmua4xFqJTkpOwHf2l/9wbzhEpmL4c/ZSrtjYwfeL/tY6aT9e8MZK
 INaMr7X2QTw=
 =nl4h
 -----END PGP SIGNATURE-----

Merge tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC multiplatform support from Arnd Bergmann:
 "Converting more ARM platforms to multiplatform support.  This time,
  OMAP gets converted, which is a major step since this is by far the
  largest platform in terms of code size.  The same thing happens to the
  vt8500 platform."

* tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  net: cwdavinci_cpdma: export symbols for cpsw
  remoteproc: omap: depend on OMAP_MBOX_FWK
  [media] davinci: do not include mach/hardware.h
  ARM: OMAP2+: Make sure files with omap initcalls include soc.h
  ARM: OMAP2+: Include soc.h to drm.c to fix compiling
  ARM: OMAP2+: Fix warning for hwspinlock omap_postcore_initcall
  ARM: multi_v7_defconfig: add ARCH_ZYNQ
  ARM: multi_v7_defconfig: remove unnecessary CONFIG_GPIOLIB
  arm: vt8500: Remove remaining mach includes
  arm: vt8500: Convert debug-macro.S to be multiplatform friendly
  arm: vt8500: Remove single platform Kconfig options
  ARM: OMAP2+: Remove now obsolete uncompress.h and debug-macro.S
  ARM: OMAP2+: Add minimal support for booting vexpress
  ARM: OMAP2+: Enable ARCH_MULTIPLATFORM support
  ARM: OMAP2+: Disable code that currently does not work with multiplaform
  ARM: OMAP2+: Add multiplatform debug_ll support
  ARM: OMAP: Fix dmaengine init for multiplatform
  ARM: OMAP: Fix i2c cmdline initcall for multiplatform
  ARM: OMAP2+: Use omap initcalls
  ARM: OMAP2+: Limit omap initcalls to omap only on multiplatform kernels
2013-02-21 15:20:41 -08:00
Linus Torvalds b274776c54 arm-soc: cleanups
A large number of cleanups, all over the platforms. This is dominated
 largely by the Samsung platforms (s3c, s5p, exynos) and a few of the
 others moving code out of arch/arm into more appropriate subsystems.
 The clocksource and irqchip drivers are now abstracted to the point
 where platforms that are already cleaned up do not need to even specify
 the driver they use, it can all get configured from the device tree
 as we do for normal device drivers. The clocksource changes basically
 touch every single platform in the process.
 
 We further clean up the use of platform specific header files here,
 with the goal of turning more of the platforms over to being
 "multiplatform" enabled, which implies that they cannot expose
 their headers to architecture independent code any more.
 
 It is expected that no functional changes are part of the cleanup.
 The overall reduction in total code lines is mostly the result of
 removing broken and obsolete code.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUSUyKmCrR//JCVInAQIN8RAAnb/uPytmlMjn5yCksF4Mvb/FVbn/TVwz
 KRIGpCHOzyKK1q7pM8NRUVWfjW2SZqbXJFqx6zBGKSlDPvFTOhsLyyupU+Tnyu5W
 IX4eIUBwb+a6H7XDHw0X2YI8uHzi5RNLhne0A1QyDKcnuHs1LDAttXnJHaK4Ap6Y
 NN2YFt3l3ld7DXWXJtMsw5v8lC10aeIFGTvXefaPDAdeMLivmI57qEUMDXknNr7W
 Odz/Rc0/cw3BNBVl/zNHA0jw7FOjKAymCYYNUa4xDCJEr+JnIRTqizd0N/YIIC7x
 aA2xjJ3oKUFyF51yiJE6nFuTyJznhwtehc+uiMOSIkjrPLym52LEHmd7G5Yqlmjz
 oiei09qBb870q3lGxwfht9iaeIwYgQFYGfD0yW5QWArCO5pxhtCPLPH7YZNZtcQd
 ZJRSGGqT/ljBz3bm0K9OLESeeTTN7+Nxvtpiz/CD+Piegz0gWJzDYJRTzkJ3UWpA
 WTVhVQdWUeX2JrNkgM7Z3Tu8iXOe+LIEs7kVXGJZSREmIIZiRvR36UrODZtAkp9I
 7YQ+srX/uaR832pgK0RrHK0zY0psU6MmIvhYxJZFbx7keiPA9eH6drb0x7tGqcUD
 FzEUzvcZvyqppndfBi+R60H/YKAhJDEXdwxzo6dyCpPQaW1T9GnzIqXuE1zin+Aw
 X7Y8YywMbHI=
 =DvgJ
 -----END PGP SIGNATURE-----

Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Arnd Bergmann:
 "A large number of cleanups, all over the platforms.  This is dominated
  largely by the Samsung platforms (s3c, s5p, exynos) and a few of the
  others moving code out of arch/arm into more appropriate subsystems.

  The clocksource and irqchip drivers are now abstracted to the point
  where platforms that are already cleaned up do not need to even
  specify the driver they use, it can all get configured from the device
  tree as we do for normal device drivers.  The clocksource changes
  basically touch every single platform in the process.

  We further clean up the use of platform specific header files here,
  with the goal of turning more of the platforms over to being
  "multiplatform" enabled, which implies that they cannot expose their
  headers to architecture independent code any more.

  It is expected that no functional changes are part of the cleanup.
  The overall reduction in total code lines is mostly the result of
  removing broken and obsolete code."

* tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (133 commits)
  ARM: mvebu: correct gated clock documentation
  ARM: kirkwood: add missing include for nsa310
  ARM: exynos: move exynos4210-combiner to drivers/irqchip
  mfd: db8500-prcmu: update resource passing
  drivers/db8500-cpufreq: delete dangling include
  ARM: at91: remove NEOCORE 926 board
  sunxi: Cleanup the reset code and add meaningful registers defines
  ARM: S3C24XX: header mach/regs-mem.h local
  ARM: S3C24XX: header mach/regs-power.h local
  ARM: S3C24XX: header mach/regs-s3c2412-mem.h local
  ARM: S3C24XX: Remove plat-s3c24xx directory in arch/arm/
  ARM: S3C24XX: transform s3c2443 subirqs into new structure
  ARM: S3C24XX: modify s3c2443 irq init to initialize all irqs
  ARM: S3C24XX: move s3c2443 irq code to irq.c
  ARM: S3C24XX: transform s3c2416 irqs into new structure
  ARM: S3C24XX: modify s3c2416 irq init to initialize all irqs
  ARM: S3C24XX: move s3c2416 irq init to common irq code
  ARM: S3C24XX: Modify s3c_irq_wake to use the hwirq property
  ARM: S3C24XX: Move irq syscore-ops to irq-pm
  clocksource: always define CLOCKSOURCE_OF_DECLARE
  ...
2013-02-21 14:58:40 -08:00
Olof Johansson 1087f4dbf3 imx soc changes for 3.9
- Sort out imx DEBUG_LL uart port selection
  - A couple of imx_v6_v7_defconfig updates
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJREHAwAAoJEFBXWFqHsHzOONMIAK/w88b7mCNmwOgV+nEDZGfm
 17rVGXZV4YdR4bpOFBdbMMddf16Yb5ENH5AHDwlYzr8zzZE0ODOjrQ5Pmk1aA9VR
 EsJVIKpS9FnU6tvUIEnYPTK+PDkf44IW/bDb9BdbptVQmnWP/hTtYDcx7ruTSZx4
 OK/Z9oz3Hwwl8+AfWh67tZ/nqJg7eugGwctM6IxMOH7dUCuJ5DALF9dYn3NCqC6b
 oqkzbNpSdg2MicUINiMOEbQvoZfGgpC6CH/nWCSIjNWss0bbakpF5iqk0aU7+/0k
 tNtbKFIAKgcHF4t0P0RyI6Qyt03tPBF2tUobuCEtwdBDT3jWFrkpUpImFLyE5+I=
 =0R2N
 -----END PGP SIGNATURE-----

Merge tag 'imx-soc-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/soc

From Shawn Guo:
imx soc changes for 3.9

 - Sort out imx DEBUG_LL uart port selection
 - A couple of imx_v6_v7_defconfig updates

* tag 'imx-soc-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6:
  ARM: imx_v6_v7_defconfig: enable anatop regulator and snvs rtc
  ARM: imx: support DEBUG_LL uart port selection for all i.MX SoCs
  ARM: imx: use separated debug uart symbol for imx31 and imx35
  ARM: imx_v6_v7_defconfig: Select IPUV3 driver
2013-02-05 15:34:51 -08:00
Olof Johansson 4227961650 imx6q cpuidle support for 3.9
- It's based on imx-cleanup-3.9 to avoid conflicts.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJRCRzjAAoJEFBXWFqHsHzOOTYH/2YiAhCXDoovJ++leTTBKoFO
 kRx2gvV0oxQYAjvRX4IiiwcuWjbCQI8ugiKxeH9Vn+jwHD8jKqzTINEUVQfKUud6
 s8AI1/EqKwKnEFYFs/Fg6WxZHuHpoL/clpRB/5wZw1KoChmte2OnVU7d9vOt67iN
 l0P4nPR18iwU5LFoDCnqMX50Dp9C56KEF2JhzBCQKW9TtRclwpcBNy6AsHb/TNOe
 /nHN+Ku6/3xQEz2MPQ9QdmgFxnp9Pr8R6leJNg1Vg6UGRYrKxy0zVo+oFEXAZuUw
 v6gnhdlvO6Ki/IKHcWkw7Q7pUDTuB6SttirQE9mBlPdc0V3kTU82SVtX9WAQhSs=
 =rVol
 -----END PGP SIGNATURE-----

Merge tag 'imx6q-cpudile-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/soc

From Shawn Guo:
imx6q cpuidle support for 3.9

 - It's based on imx-cleanup-3.9 to avoid conflicts.

* tag 'imx6q-cpudile-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6:
  ARM: imx6q: support WAIT mode using cpuidle
  ARM: imx: move imx6q_cpuidle_driver into a separate file
  ARM: imx: mask gpc interrupts initially
  ARM: imx: return zero in case next event gets a large increment
  ARM: imx: Remove mx508 support
  ARM: imx: Remove mach-mx51_3ds board
  ARM: imx: use debug_ll_io_init() for imx6q
  ARM: imx: remove unused imx6q_clock_map_io()
  ARM: mach-imx: Kconfig: Do not select Babbage for MACH_IMX51_DT

Signed-off-by: Olof Johansson <olof@lixom.net>

Still, two delete/change conflicts caused by imx/cleanup:

	arch/arm/mach-imx/mach-mx50_rdp.c
	arch/arm/mach-imx/mach-mx51_3ds.c
2013-02-04 22:24:20 -08:00
Shawn Guo f8c95fe6d9 ARM: imx: support DEBUG_LL uart port selection for all i.MX SoCs
Extend imx6q DEBUG_LL uart port selection support to cover all i.MX
SoCs.  The 'range' of the Kconfig option gets dropped, as users
looking at the option must know the uart number on his board.  The
bottom line is that the build system will report an error if an
invalid port number is picked for given SoC.

The header arch/arm/include/debug/imx-uart.h is created to accommodate
all the uart base addresses.  And the header will also be used for
other low-level debug facility later.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-02-05 10:14:55 +08:00
Shawn Guo 4ad625d466 ARM: imx: use separated debug uart symbol for imx31 and imx35
It's improper to use combined symbol DEBUG_IMX31_IMX35_UART for
imx31 and imx35, because imx31 has 5 UARTs while imx35 only has 3.
So later when we add UART port selection for DEBUG_IMX31_IMX35_UART,
we will have problem.

Use separated Kconfig options for imx31 and imx35 debug uart selection.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-02-05 10:14:54 +08:00
Fabio Estevam 7356420cd3 ARM: imx: Remove mx508 support
Only mx508 based board is mach-mx50_rdp and it has been marked as BROKEN
for several releases.

mx508 currently lacks clock support.

In case someone needs to add mx508 support back, then the recommended approach
is to use device tree.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-29 14:05:43 +08:00
Olof Johansson af70fdc947 Merge branch 'marco-timer-cleanup-rebase' of git://gitorious.org/sirfprima2-kernel/sirfprima2-kernel into next/soc
From Barry Song, this adds support for a new SoC from CSR; marco. It's
SMP, uses GIC instead of VIC and in general needs a bit of rework of
the platform code for setup, which this branch contains.

* 'marco-timer-cleanup-rebase' of git://gitorious.org/sirfprima2-kernel/sirfprima2-kernel:
  ARM: PRIMA2: provide two DEBUG_LL ports for prima2 and marco
  ARM: PRIMA2: add new SiRFmarco SMP SoC infrastructures
  ARM: PRIMA2: irq: make prima2 irq can work even we enable GIC for Marco
  ARM: PRIMA2: rtciobg: it is also compatible with marco
  ARM: PRIMA2: rstc: enable the support for Marco
  ARM: PRIMA2: mv timer to timer-prima2 as we will add timer-marco
  ARM: PRIMA2: initialize l2x0 according to mach from DT
  ARM: PRIMA2: enable AUTO_ZRELADDR for SIRF in Kconfig
  ARM: PRIMA2: add CSR SiRFmarco device tree .dts

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-27 23:03:42 -08:00
Barry Song 7f46a10724 ARM: PRIMA2: provide two DEBUG_LL ports for prima2 and marco
prima2 and marco has different memory base, the old code will
fail if we enable DEBUG_LL in marco.
this patch adds two debuf port, while debugging, we select one
of PRIMA2 and MARCO debug ports, in the products, we disable
DEBUG_LL.

Signed-off-by: Barry Song <Baohua.Song@csr.com>
2013-01-22 19:53:36 +08:00
Kees Cook d6f94fa0f3 arch/arm: remove depends on CONFIG_EXPERIMENTAL
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a
while now and is almost always enabled by default. As agreed during the
Linux kernel summit, remove it from any "depends on" lines in Kconfigs.

CC: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-21 14:43:11 -08:00
Olof Johansson 2fd73eb62b arm: vt8500: Convert arch-vt8500 to multiplatform only.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJQ8NA/AAoJEAKiPfwuf9N/caoIAIvDe6pEB1dCmoL+X14bYc2E
 Q0qeDyP2TUlVqJFf/vy0Lq/LwDHsMj5t4fxJpnWXz1QfEcMPL46Ahlhg49ryt4Zq
 Y6VzBDIEeZz+OFj8THhlGKGFdbqtqktcofBpQ3NoJV+AIomVCDPHKq/bcXOHGFGv
 q0gjBwG8xaBv+Cx8LPv4p62hrJHcmebm+yg4fgfL1D+aTw+031EVTgK1xwUQw6IE
 oSftBeB/WS5Yhk+JuX0hmSOfOCFxQv+mrfoxa00hoFcd5ZKu6Eqx88kOc2M0sl76
 hmVy+0HDF2Ccs4aPYPLz3/wEJ8P7744F1zYfNvJgMjS7eijJXZ3XtpFMVXzDRKk=
 =y4dJ
 -----END PGP SIGNATURE-----

Merge tag 'vt8500-multiplatform-3.9' of git://server.prisktech.co.nz/git/linuxwmt into next/multiplatform

From Tony Prisk:
Convert arch-vt8500 to multiplatform only.

* tag 'vt8500-multiplatform-3.9' of git://server.prisktech.co.nz/git/linuxwmt:
  arm: vt8500: Remove remaining mach includes
  arm: vt8500: Convert debug-macro.S to be multiplatform friendly
  arm: vt8500: Remove single platform Kconfig options

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-12 09:09:34 -08:00
Tony Prisk b61a272275 arm: vt8500: Convert debug-macro.S to be multiplatform friendly
This patch moves debug-macro.S from arm/mach-vt8500/include/mach to
arm/include/debug/vt8500.S to provide multiplatform support.

Minor style changes in code for readability.

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
2013-01-12 15:47:38 +13:00
Tony Lindgren 808b7e0746 ARM: OMAP2+: Add multiplatform debug_ll support
Add multiplatform debug_ll support by stripping away
the custom hacks to detect the port from debug-macro.S.

Note that this now requires the specific debug_ll port to
be selected in the .config.

The old debug-macro.S will be removed a bit later
once we are sure things work properly with multiplatform
enabled.

Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-01-11 11:24:19 -08:00
Linus Torvalds b8edf848e9 ARM: arm-soc: multiplatform conversion patches
Here are more patches in the progression towards multiplatform, sparse
 irq conversions in particular.
 
 Tegra has a handful of cleanups and general groundwork, but is
 not quite there yet on full enablement.
 
 Platforms that are enabled through this branch are VT8500 and Zynq. note
 that i.MX was converted in one of the earlier cleanup branches as
 well (before we started a separate topic for multiplatform). And both
 new platforms for this merge window, sunxi and bcm, were merged with
 multiplatform support enabled.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQySb/AAoJEIwa5zzehBx3Wo4P/0GrpUhB/qwuhgy43MA2I1Dv
 tnyuFvsfW9uRExcw2IwT39GFls98QUM9TwQxPqOTHVf+u0LkYMZ9aDeWJOdj3RvG
 H70Ypj4gZDrzZAFr2TUf8NnYGHd6G2EcMn3261Hjfd7YrswCjsMPvgRns7VOyHCa
 deif3KcLu3+HzxvuzqlVlTuSAagCQbfqqnTQduMRdJPHT3X3sXwl7ABW+qfOoeYC
 rjqIbjdh5dB1d/f7igtgBbXjSTnVz/Mr1+wk4rp9Xr1Wv0IXvIaSKjK2Df8ZuNAk
 aQ6mMy/oDVxlDSrYv0F7lB40/rsZcPqz8+fgYJ2FnvCpIM7z7NeTWD2kQJ2UaQ/s
 VunShloRxF8It6104EVWZDfEA9NvVBcCALSze0NukqiHZRZYGUzxRNQDrncaksC9
 Lm+Z16cUWogsZq7VDCgXYQJeakPQfBDnsx7siMvAbOgvtpSClxuwhdC/czJiix7h
 BcpA+l5xSviUhHvzHhDt9iJxHjbUmo1xLDvaZSgj2OjAj257JcwaNBCk5BjZTCwe
 xZmQu1FjwaGtjLiG6QY0WJRsq1hiFRIb/MaWar/WpfqADFqARoambGFUjOl+P4Mu
 DIM5Z0AS04H+pLuP1QOz/yXxOPEP6Ri36to6XrgzfL/XGet5LW2P59xXxhcWC/OL
 /3IAcQrsAqh4aGMOstW1
 =UJlh
 -----END PGP SIGNATURE-----

Merge tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC multiplatform conversion patches from Olof Johansson:
 "Here are more patches in the progression towards multiplatform, sparse
  irq conversions in particular.

  Tegra has a handful of cleanups and general groundwork, but is not
  quite there yet on full enablement.

  Platforms that are enabled through this branch are VT8500 and Zynq.
  Note that i.MX was converted in one of the earlier cleanup branches as
  well (before we started a separate topic for multiplatform).  And both
  new platforms for this merge window, sunxi and bcm, were merged with
  multiplatform support enabled."

Fix up conflicts mostly as per Olof.

* tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (29 commits)
  ARM: zynq: Remove all unused mach headers
  ARM: zynq: add support for ARCH_MULTIPLATFORM
  ARM: zynq: make use of debug_ll_io_init()
  ARM: zynq: remove TTC early mapping
  ARM: tegra: move debug-macro.S to include/debug
  ARM: tegra: don't include iomap.h from debug-macro.S
  ARM: tegra: decouple uncompress.h and debug-macro.S
  ARM: tegra: simplify DEBUG_LL UART selection options
  ARM: tegra: select SPARSE_IRQ
  ARM: tegra: enhance timer.c to get IO address from device tree
  ARM: tegra: enhance timer.c to get IRQ info from device tree
  ARM: timer: fix checkpatch warnings
  ARM: tegra: add TWD to device tree
  ARM: tegra: define DT bindings for and instantiate RTC
  ARM: tegra: define DT bindings for and instantiate timer
  clocksource/mtu-nomadik: use apb_pclk
  clk: ux500: Register mtu apb_pclocks
  ARM: plat-nomadik: convert platforms to SPARSE_IRQ
  mfd/db8500-prcmu: use the irq_domain_add_simple()
  mfd/ab8500-core: use irq_domain_add_simple()
  ...
2012-12-13 10:57:16 -08:00
Linus Torvalds db5b0ae007 ARM: arm-soc: device tree conversions and enablement
Continued device tree conversion and enablement across a number of
 platforms; Kirkwood, tegra, i.MX, Exynos, zynq and a couple of other
 smaller series as well.
 
 ux500 has seen continued conversion for platforms. Several platforms have
 seen pinctrl-via-devicetree conversions for simpler multiplatform. Tegra
 is adding data for new devices/drivers, and Exynos has a bunch of new
 bindings and devices added as well.
 
 So, pretty much the same progression in the right direction as the last
 few releases.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQySW7AAoJEIwa5zzehBx39xcP/jzEQOTOJdK4zJd1OjgrQoX/
 WnhbGJT941RNjRjvDG6HmZzhpsRoE4q/zkjFEKoKELdikRW0hYoR+zPCGuB7XtN5
 aF1ZQrTx4gHf4KE7doIB8slaWeOq8aG2TLFhylyy+cuaIpRK0NG0pAR0ZqWaoga9
 tZFciqzplLeo50vZ+y+lVVsR40j/w29EjwPXhCV30//gGOYLyp/VDu5PRtrBdgh8
 EgpcT2EWJwMCN/Upcao/q2JbQktPHPpSwnpaUAALYB20uD7k5jo7wtYE/+L9nn6B
 bxcCDTMVmqzNTF+y0P16hDcs5jMLVjpI0xBiyZ1G6gShpggsSZCHY5ynjAtQ19se
 r+2WrNfOR23k6arJuOUAQSEnLdx0T5SlW6CJeFEofKv4uoebxAbKUiNO4ShWskhd
 nNptX1+L3hj3zpjGcEHmL6bd+nGtyMeoG9Yekcv1oZxdVcpKhFxh0s5PEJBEeXcN
 M7aAWlWJkplV22Olqhpc/3INCweq6E+zBrBxZaUBW/JCzGrqBUGC0BULDPAkmC4J
 CKL6IqIB73jGQ4OY14IaMU20GJrIGxZ7wzXOp4aw3OUpRlxsgurfyFQeIjUvVoZL
 PJ8DRoAVwreVHvKfgZZVKpSAY7dwcWbxpWsYlrH3zWIC5vRJ0UFwsD0TpLJWd6Vi
 XA8gQcJRWKGS8E5mRY39
 =Rk9v
 -----END PGP SIGNATURE-----

Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree conversions and enablement from Olof Johansson:
 "Continued device tree conversion and enablement across a number of
  platforms; Kirkwood, tegra, i.MX, Exynos, zynq and a couple of other
  smaller series as well.

  ux500 has seen continued conversion for platforms.  Several platforms
  have seen pinctrl-via-devicetree conversions for simpler
  multiplatform.  Tegra is adding data for new devices/drivers, and
  Exynos has a bunch of new bindings and devices added as well.

  So, pretty much the same progression in the right direction as the
  last few releases."

Fix up conflicts as per Olof.

* tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (185 commits)
  ARM: ux500: Rename dbx500 cpufreq code to be more generic
  ARM: dts: add missing ux500 device trees
  ARM: ux500: Stop registering the PCM driver from platform code
  ARM: ux500: Move board specific GPIO info out to subordinate DTS files
  ARM: ux500: Disable the MMCI gpio-regulator by default
  ARM: Kirkwood: remove kirkwood_ehci_init() from new boards
  ARM: Kirkwood: Add support LED of OpenBlocks A6
  ARM: Kirkwood: Convert to EHCI via DT for OpenBlocks A6
  ARM: kirkwood: Add NAND partiton map for OpenBlocks A6
  ARM: kirkwood: Add support second I2C bus and RTC on OpenBlocks A6
  ARM: kirkwood: Add support DT of second I2C bus
  ARM: kirkwood: Convert mplcec4 board to pinctrl
  ARM: Kirkwood: Convert km_kirkwood to pinctrl
  ARM: Kirkwood: support 98DX412x kirkwoods with pinctrl
  ARM: Kirkwood: Convert IX2-200 to pinctrl.
  ARM: Kirkwood: Convert lsxl boards to pinctrl.
  ARM: Kirkwood: Convert ib62x0 to pinctrl.
  ARM: Kirkwood: Convert GoFlex Net to pinctrl.
  ARM: Kirkwood: Convert dreamplug to pinctrl.
  ARM: Kirkwood: Convert dockstar to pinctrl.
  ...
2012-12-13 10:39:26 -08:00
Olof Johansson 79870b7bca Merge branch 'next/devel-samsung-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/soc
From Kukjin Kim:

This is including Samsung small updates(developments) for v3.8.

Add node PL330 MDMA1 and UART3 for DEBUG_LL and secondary cpu bring-up
for exynos4412.

* 'next/devel-samsung-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: dts: add node for PL330 MDMA1 controller for exynos4
  ARM: EXYNOS: Add support for secondary CPU bring-up on Exynos4412
  ARM: EXYNOS: add UART3 to DEBUG_LL ports

Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-30 09:32:24 -08:00
Olof Johansson 5fa23dde6e ARM: EXYNOS: add UART3 to DEBUG_LL ports
Add support for using UART3 for DEBUG_LL on exynos.

[dianders: added depend on ARCH_EXYNOS.]

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-28 08:04:21 +09:00
Olof Johansson 3f54db784a Merge branch 'zynq/multiplatform' of git://git.monstr.eu/linux-2.6-microblaze into next/multiplatform
From Michal Simek:

This branch depends on arm-soc devel/debug_ll_init branch because
we needed Rob's "ARM: implement debug_ll_io_init()"
(sha1: afaee03511ba8002b26a9c6b1fe7d6baf33eac86)
patch.

This branch also depends on zynq/dt branch because of previous major
zynq changes.
zynq/cleanup branch is subset of zynq/dt.

* 'zynq/multiplatform' of git://git.monstr.eu/linux-2.6-microblaze:
  ARM: zynq: Remove all unused mach headers
  ARM: zynq: add support for ARCH_MULTIPLATFORM
  ARM: zynq: make use of debug_ll_io_init()
  ARM: zynq: remove TTC early mapping
  ARM: zynq: add clk binding support to the ttc
  ARM: zynq: use zynq clk bindings
  clk: Add support for fundamental zynq clks
  ARM: zynq: dts: split up device tree
  ARM: zynq: Allow UART1 to be used as DEBUG_LL console.
  ARM: zynq: dts: add description of the second uart
  ARM: zynq: move arm-specific sys_timer out of ttc
  zynq: move static peripheral mappings
  zynq: remove use of CLKDEV_LOOKUP
  zynq: use pl310 device tree bindings
  zynq: use GIC device tree bindings

Add/add conflict in arch/arm/Kconfig.debug.

Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-21 11:49:45 -08:00
Olof Johansson e9f6d13513 Merge branch 'sunxi/soc2' into next/soc
From Maxime Ripard:

Here is a pull request to add the support for Allwinner A10 SoCs.

* sunxi/soc2:
  ARM: sunxi: Add sunxi restart function via onchip watchdog
  ARM: sunxi: Add sun4i and cubieboard support
  ARM: sunxi: Add earlyprintk support for UART0 (sun4i)
  ARM: sunxi: Restructure sunxi dts/dtsi files

Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-21 10:52:44 -08:00
Josh Cartwright 385f02b169 ARM: zynq: make use of debug_ll_io_init()
Convert low-level debugging routines to make use of debug_ll_io_init().
This is part of the preparation for ARCH_MULTIPLATFORM support for Zynq.

Signed-off-by: Josh Cartwright <josh.cartwright@ni.com>
Tested-by: Michal Simek <michal.simek@xilinx.com>
2012-11-21 10:52:05 +01:00
Olof Johansson 5ffd785402 Allwinner SoC support for 3.8
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iEYEABECAAYFAlCmwSAACgkQGxsu9jQV9nbssgCcChzwuFlPkP4sVdTtAGGh5mWD
 rNcAn3PfG1ByMR57GkDtdQiAjS5N2dME
 =Pi49
 -----END PGP SIGNATURE-----

Merge tag 'tags/sunxi-support-for-3.8' of git://github.com/mripard/linux into next/soc

From Maxime Ripard:
Allwinner SoC support for 3.8

* tag 'tags/sunxi-support-for-3.8' of git://github.com/mripard/linux:
  ARM: sunxi: Add entry to MAINTAINERS
  ARM: sunxi: Add device tree for the A13 and the Olinuxino board
  ARM: sunxi: Add earlyprintk support
  ARM: sunxi: Add basic support for Allwinner A1x SoCs
  irqchip: sunxi: Add irq controller driver
  clocksource: sunxi: Add Allwinner A1X Timer Driver
  clk: sunxi: Add dummy fixed rate clock for Allwinner A1X SoCs

Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-20 22:14:59 -08:00
Stefan Roese aa25115aff ARM: sunxi: Add earlyprintk support for UART0 (sun4i)
Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2012-11-20 15:36:21 +01:00
Maxime Ripard cb84fa18a4 ARM: sunxi: Add earlyprintk support
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Stefan Roese <sr@denx.de>
2012-11-16 21:56:52 +01:00
Stephen Warren 4606780352 ARM: tegra: move debug-macro.S to include/debug
Move Tegra's debug-macro.S over to the common debug macro directory.

Move Tegra's debug UART selection menu into ARM's Kconfig.debug, so that
all related options are selected in the same place.

Tegra's uncompress.h is left in mach-tegra/include/mach; it will be
removed whenever Tegra is converted to multi-platform.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-16 12:22:18 -07:00