Now platform_device is being widely used on SoC processors where the
peripherals are attached to the system bus, which is simple enough.
However, silicon IPs for these SoCs are usually shared heavily across
a family of processors, even products from different companies. This
makes the original simple driver name based matching insufficient, or
simply not straight-forward.
Introduce a module id table for platform devices, and makes it clear
that a platform driver is able to support some shared IP and handle
slight differences across different platforms (by 'driver_data').
Module alias is handled automatically when a MODULE_DEVICE_TABLE()
is defined.
To not disturb the current platform drivers too much, the matched id
entry is recorded and can be retrieved by platform_get_device_id().
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
'make randconfig' uses glibc's rand function, and the seed of
that PRNG is set via:
srand(time(NULL));
But 'time()' only increases once every second - freezing the
randconfig result within a single second.
My Nehalem testbox does randconfig much faster than 1 second
and i have a few scripts that do 'randconfig until condition X'
loops.
Those scripts currently waste a lot of CPU time due to randconfig
changing its seed only once per second currently.
Change the seed to be micrseconds based. (I checked the statistical
spread of the seed - the now.tv_sec*now.tv_usec multiplication
there further improves it.)
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Roman Zippel <zippel@linux-m68k.org>
[sam: fix for systems where usec is zero - noticed by Geert Uytterhoeven]
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Ingo Molnar reported that 'make randconfig' was not covering
choice blocks properly, resulting in certain config options
being left out of randconfig testing altogether.
With the following patch we:
- properly randomize choice value for normal choice blocks
- properly randomize for multi choice blocks
- added several comments to explain what is going on
The root cause of the bug was that SYMBOL_VALID was set on the
symbol representing the choice block so clearing this did
the trick initially.
But testign revealed a few more issues that is now fixed.
Reported-by: Ingo Molnar <mingo@elte.hu>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Impact: bugfix, output more reliable symbol lookup result
Debug tools(dump_stack(), ftrace...) are like to print out symbols.
But it is always print out the first aliased symbol.(Aliased symbols
are symbols with the same address), and the first aliased symbol is
sometime not proper.
# echo function_graph > current_tracer
# cat trace
......
1) 1.923 us | select_nohz_load_balancer();
1) + 76.692 us | }
1) | default_idle() {
1) ==========> | __irqentry_text_start() {
1) 0.000 us | native_apic_mem_write();
1) | irq_enter() {
1) 0.000 us | idle_cpu();
1) | tick_check_idle() {
1) 0.000 us | tick_check_oneshot_broadcast();
1) | tick_nohz_stop_idle() {
......
It's very embarrassing, it ouputs "__irqentry_text_start()",
actually, it should output "smp_apic_timer_interrupt()".
(these two symbol are the same address, but "__irqentry_text_start"
is deemed to the first aliased symbol by scripts/kallsyms)
This patch puts symbols like "__irqentry_text_start" to the second
aliased symbols. And a more proper symbol name becomes the first.
Aliased symbols mostly come from linker script. The solution is
guessing "is this symbol defined in linker script", the symbols
defined in linker script will not become the first aliased symbol.
And if symbols are found to be equal in this "linker script provided"
criteria, symbols are sorted by the number of prefix underscores.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Paulo Marques <pmarques@grupopie.com>
LKML-Reference: <49BA06E2.7080807@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Running 'make rpm' fails when CONFIG_LOCALVERSION_AUTO=y and using a kernel source
tree under SCM. This is due to KERNELRELEASE being different when the initial make
is run and when make is run from rpmbuild.
mkspec creates kernel.spec using KERNELRELEASE:
<mkspec>
echo "%files"
echo '%defattr (-, root, root)'
echo "%dir /lib/modules"
echo "/lib/modules/$KERNELRELEASE"
echo "/lib/firmware"
echo "/boot/*"
echo ""
</mkspec>
When CONFIG_LOCALVERSION_AUTO=y scripts/setlocalversion is called and grabs any
additional version info from SCM. Next, the srctree is tarred up and SCM
information is excluded.
rpmbuild reruns make and in the process generates a new include/config/kernel.release
and thus a new KERNELRELEASE. However this time the SCM information is gone so
KERNELRELEASE no longer has the additional version information. When "make modules_install"
runs, it uses the new KERNELRELEASE value to determine where to install the modules.
This conflicts with where the spec file assumes they are going because of the
mis-matching KERNELRELEASE versions.
<snippet>
+ INSTALL_MOD_PATH=/var/tmp/kernel-2.6.29rc4tip01479g5d85422-root
+ make -j16 modules_install
INSTALL crypto/aead.ko
INSTALL crypto/cbc.ko
INSTALL crypto/chainiv.ko
INSTALL crypto/crc32c.ko
INSTALL crypto/crypto_algapi.ko
INSTALL crypto/crypto_blkcipher.ko
INSTALL crypto/crypto_hash.ko
INSTALL crypto/cryptomgr.ko
INSTALL crypto/ecb.ko
INSTALL crypto/eseqiv.ko
INSTALL crypto/krng.ko
INSTALL crypto/md5.ko
INSTALL crypto/pcbc.ko
INSTALL crypto/rng.ko
INSTALL drivers/block/cciss.ko
INSTALL drivers/hid/hid-dummy.ko
INSTALL drivers/scsi/iscsi_tcp.ko
INSTALL drivers/scsi/libiscsi.ko
INSTALL drivers/scsi/libiscsi_tcp.ko
INSTALL drivers/scsi/scsi_transport_iscsi.ko
INSTALL drivers/scsi/scsi_wait_scan.ko
INSTALL fs/lockd/lockd.ko
INSTALL fs/nfs/nfs.ko
INSTALL fs/nfsd/nfsd.ko
INSTALL lib/libcrc32c.ko
INSTALL net/sunrpc/sunrpc.ko
DEPMOD 2.6.29-rc4-tip
+ cp arch/x86/boot/bzImage
/var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/boot/vmlinuz-2.6.29-rc4-tip-01479-g5d85422
+ cp System.map
/var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/boot/System.map-2.6.29-rc4-tip-01479-g5d85422
+ cp .config
/var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/boot/config-2.6.29-rc4-tip-01479-g5d85422
+ cp vmlinux vmlinux.orig
+ bzip2 -9 vmlinux
+ mv vmlinux.bz2
/var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/boot/vmlinux-2.6.29-rc4-tip-01479-g5d85422.bz2
+ mv vmlinux.orig vmlinux
+ /usr/lib/rpm/brp-compress
Processing files: kernel-2.6.29rc4tip01479g5d85422-2
error: File not found:
/var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/lib/modules/2.6.29-rc4-tip-01479-g5d85422
RPM build errors:
File not found:
/var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/lib/modules/2.6.29-rc4-tip-01479-g5d85422
make[1]: *** [rpm] Error 1
make: *** [rpm] Error 2
</snippet>
I have tested this patch on git -tip, Linus' git tree, and the kernel.org tar files, both
with and without CONFIG_LOCALVERSION_AUTO=y.
Signed-off-by: Josh Hunt <josh@scalex86.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
----
The contents of the %clean section in mkspec is currently commented
out leaving RPM_BUILD_ROOT and its contents on the build machine.
This patch removes it once the rpm build process is complete.
Signed-off-by: Josh Hunt <josh@scalex86.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
This fixes an error when compiling the kernel.
CHK include/linux/version.h
HOSTCC scripts/unifdef
scripts/unifdef.c:209: error: conflicting types for 'getline'
/usr/include/stdio.h:651: note: previous declaration of 'getline' was here
make[1]: *** [scripts/unifdef] Error 1
make: *** [__headers] Error 2
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Add __ref as a sparse modifier.
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We should allow testing of all modifiers not just attributes. Extend
testing and test for all the know modifiers.
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We must make sure we do not misrecognise a modifier as an Identifier
when trying to match types. Prevent us matching this:
void * __ref
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We may have any modifier following a pointer type star. Handle this:
void * __user * __user foo;
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We need to handle interspersed modifiers in the middle of pointer types,
for example:
void * __user * __user bar;
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We are triggering the -p0 check for our own diffs generated using --file
command line option. Suppress this check for files.
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We say that in_atomic() is ok in the core kernel, but then always report
it regardless of where in the kernel it is. Keep quiet if it is used in
kernel/*.
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Impact: Bugfix, silent build failures
Fix a bug in gen_initramfs_list.sh: in case of failure, it left an
empty output file behind, messing up the next make.
Signed-off-by: Alain Knaff <alain@knaff.lu>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes:
kbuild: create the source symlink earlier in the objdir
scripts: add x86 64 bit support to the markup_oops.pl script
scripts: add x86 register parser to markup_oops.pl
kbuild: add sys_* entries for syscalls in tags
kbuild: fix tags generation of config symbols
bootgraph: fix for use with dot symbols
kbuild: add vmlinux to kernel rpm
kbuild,setlocalversion: shorten the make time when using svn
Fix endianness of bus member of hid_device_id in modpost.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Reported-by: Nye Liu <nyet@mrv.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
An oops dump also contains the register values.
This patch parses these for (32 bit) x86, and then annotates the
disassembly with these values; this helps in analysis of the oops by the
developer, for example, NULL pointer or other pointer bugs show up clearly
this way.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Currently, it is no longer possible to use the tags file to jump to
system call function definitions with sys_foo, because the definitions
are obscured by use of the SYSCALL_DEFINE* macros.
This patch adds the appropriate option to ctags to make it see through
the macro. Also, it adds the ENTRY() work already done for Exuberant
to Emacs too.
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
commit 4f628248a5 aka "kbuild: reintroduce
ALLSOURCE_ARCHS support for tags/cscope" breaks tags generation for
Kconfig symbols.
Steps to reproduce:
make tags
vi -t PROC_FS
It should jump to 'config PROC_FS' line.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Tested-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
powerpc has dot symbols, so the dmesg output looks like:
<4>[ 0.327310] calling .migration_init+0x0/0x9c @ 1
<4>[ 0.327595] initcall .migration_init+0x0/0x9c returned 1 after 0 usecs
The below fixes bootgraph.pl so it handles this correctly.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
We are building an automated system to test kernels weekly and need to
provide an rpm to our QA dept. We would like to use the ability to create
kernel rpms already in the kernel's Makefile, but need the vmlinux file
included in the rpm for later debugging.
This patch adds a compressed vmlinux to the kernel rpm when doing a
make rpm-pkg or binrpm-pkg and upon install places the vmlinux file in /boot.
Signed-off-by: Josh Hunt <josh@scalex86.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Don't bother doing `svn st` as it takes a retarded amount of time when
the source is cold
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Fix kernel-doc processing of SYSCALL wrappers.
The SYSCALL wrapper patches played havoc with kernel-doc for
syscalls. Syscalls that were scanned for DocBook processing
reported warnings like this one, for sys_tgkill:
Warning(kernel/signal.c:2285): No description found for parameter 'tgkill'
Warning(kernel/signal.c:2285): No description found for parameter 'pid_t'
Warning(kernel/signal.c:2285): No description found for parameter 'int'
because the macro parameters all "look like" function parameters,
although they are not:
/**
* sys_tgkill - send signal to one specific thread
* @tgid: the thread group ID of the thread
* @pid: the PID of the thread
* @sig: signal to be sent
*
* This syscall also checks the @tgid and returns -ESRCH even if the PID
* exists but it's not belonging to the target process anymore. This
* method solves the problem of threads exiting and PIDs getting reused.
*/
SYSCALL_DEFINE3(tgkill, pid_t, tgid, pid_t, pid, int, sig)
{
...
This patch special-cases the handling SYSCALL_DEFINE* function
prototypes by expanding them to
long sys_foobar(type1 arg1, type1 arg2, ...)
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stackprotector builds were failing if CROSS_COMPILER was more than
a single world (such as when distcc was used) - because the check
scripts used $1 instead of $*.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: stack protector for x86_32
Implement stack protector for x86_32. GDT entry 28 is used for it.
It's set to point to stack_canary-20 and have the length of 24 bytes.
CONFIG_CC_STACKPROTECTOR turns off CONFIG_X86_32_LAZY_GS and sets %gs
to the stack canary segment on entry. As %gs is otherwise unused by
the kernel, the canary can be anywhere. It's defined as a percpu
variable.
x86_32 exception handlers take register frame on stack directly as
struct pt_regs. With -fstack-protector turned on, gcc copies the
whole structure after the stack canary and (of course) doesn't copy
back on return thus losing all changed. For now, -fno-stack-protector
is added to all files which contain those functions. We definitely
need something better.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: no default -fno-stack-protector if stackp is enabled, cleanup
Stackprotector make rules had the following problems.
* cc support test and warning are scattered across makefile and
kernel/panic.c.
* -fno-stack-protector was always added regardless of configuration.
Update such that cc support test and warning are contained in makefile
and -fno-stack-protector is added iff stackp is turned off. While at
it, prepare for 32bit support.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix link failure on certain toolchains with specific configs
Recent percpu change made x86_64 split .data.init section into three
separate segments - data.init, percpu and data.init2. data.init2 gets
.data.nosave and .bss.* and is followed by .notes segment. Depending
on configuration both segments might contain no data, in which case
the tool chain makes the section header to contain offset beyond the
end of the file.
modpost isn't too happy about it and fails build - as reported by
Pawel Dziekonski:
Building modules, stage 2.
MODPOST 416 modules
FATAL: vmlinux is truncated. sechdrs[i].sh_offset=10354688 >
sizeof(*hrd)=64
make[1]: *** [__modpost] Error 1
Teach modpost that NOBITS section may point beyond the end of the file
and that .modinfo can't be NOBITS.
Reported-by: Pawel Dziekonski <dzieko@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The check for references to CONFIG_ symbols in exported headers turned
out to be too agressive with the current state of affairs.
After the work of Jaswinder to clean up all relevant cases we are down
to almost pure noise.
So lets drop the check for now - we can always add it back later
should our headers be ready for that.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Based on a patch from Brian, who identified the issue.
Signed-off-by: Bryan Kadzban <bryan@kadzban.is-a-geek.net>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Impact: fix failure of dynamic function tracer selftest
In a course of development, a developer does several makes on their
kernel. Sometimes, the make might do something abnormal. In the
case of running the recordmcount.pl script on an object twice,
the script will duplicate all the calls to mcount in the __mcount_loc
section.
On boot up, the dynamic function tracer is careful when it modifies
code, and performs several consistency checks. One is to not modify
the call site if it is not what it expects it to be. If a function
call site is listed twice, the first entry will convert the site
to a nop, and the second will fail because it expected to see a
call to mcount, but instead it sees a nop. Thus, the function tracer
is disabled.
Eric Sesterhenn reported seeing:
[ 1.055440] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 1.055568] ftrace: allocating 29418 entries in 116 pages
[ 1.061000] ------------[ cut here ]------------
[ 1.061000] WARNING: at kernel/trace/ftrace.c:441
[...]
[ 1.060000] ---[ end trace 4eaa2a86a8e2da23 ]---
[ 1.060000] ftrace failed to modify [<c0118072>] check_corruption+0x3/0x2d
[ 1.060000] actual: 0f:1f:44:00:00
This warning shows that check_corruption+0x3 already had a nop in
its place (0x0f1f440000). After compiling another kernel the problem
went away.
Later Eric Paris notice the same type of issue. Luckily, he saved
the vmlinux file that caused it. In the file we found a bunch of
duplicate mcount call site records, which lead us to the script.
Perhaps this problem only happens to people named Eric.
This patch changes the script to test if the __mcount_loc already
exists in the object file, and if it does, it will print out
an error message and kill the compile.
Reported-by: Eric Sesterhenn <snakebyte@gmx.de>
Reported-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In the general use case struct seq_operations should be a const object.
Check for and warn where it is not.
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We should not be continuing a braced section with an if, for example:
if (...) {
} if (...) {
}
Detect this and suggest adding a newline.
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When we allow return to have surrounding parentheses when containing
comparison operators we are not correctly handling the case where the
values contain array sufffixes. Squash them.
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We should not be complaining about the prefix spacing for types and casts.
We are triggering here because the check for spacing between '*'s is
overly loose. Tighten this up.
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If the #if opening statement is not in the context then the context stack
can be empty. Handle this by ensuring there is always a blank entry in
the stack.
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Tested-by: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit ad7a953c52.
And commit: ("allow stripping of generated symbols under CONFIG_KALLSYMS_ALL")
9bb482476c
These stripping patches has caused a set of issues:
1) People have reported compatibility issues with binutils due to
lack of support for `--strip-unneeded-symbols' with objcopy 2.15.92.0.2
Reported by: Wenji
2) ccache and distcc no longer works as expeced
Reported by: Ted, Roland, + others
3) The installed modules increased a lot in size
Reported by: Ted, Davej + others
Reported-by: Wenji Huang <wenji.huang@oracle.com>
Reported-by: "Theodore Ts'o" <tytso@mit.edu>
Reported-by: Dave Jones <davej@redhat.com>
Reported-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
In IA64, a function pointer isn't a 'unsigned long' but a
'struct {unsigned long ip, unsigned long gp}'. MCOUNT_ADDR is determined
at link time not compile time, so explictly ignore kernel/trace/ftrace.o
in recordmcount.pl.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In IA64, module build and kernel build use different option.
Make recordmcount.pl differentiate the two cases.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
There has been some light flamewar on lkml about decoding oopses
in modules (as part of the crashdump flamewar).
Now this isn't rocket science, just the markup_oops.pl script
cheaped out and didn't handle modules. But really; a flamewar
all about that?? What happened to C++ in the kernel or reading
files from inside the kernel?
This patch adds module support to markup_oops.pl; it's not the
most pretty perl but it works for my testcases...
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It is useful for diagnosing boot performance to see where async function
calls are waiting on serialization... this patch adds this
functionality to the bootgraph.pl script.
The waiting time is shown as a half transparent, gray bar through the
block that is waiting.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I often change single options in .config files. Instead of using
an editor or one of the frontends it's convenient to do this from
the command line. It's also useful to do from automated build scripts
when building different variants from a base config file.
I extracted most of the CONFIG manipulation code from one of my
build scripts into a new shell script scripts/config
The script is not integrated with the normal Kconfig machinery
and doesn't do any checking against Kconfig files, but just manipulates
that text format. This is always done at make time anyways.
I believe this script would be a useful standard addition for scripts/*
Sample usage:
./scripts/config --disable smp
Disable SMP in .config file
./scripts/config --file otherdir/.config --module e1000e
Enable E1000E as module in otherdir/.config
./scripts/config --state smp
y
Check state of config option CONFIG_SMP
After merging into git please make scripts/config executable
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
This patch reintroduce the ALLSOURCE_ARCHS support for tags/TAGS/
cscope targets. The Kbuild previously has this feature, but after
moving the targets into scripts/tags.sh, ALLSOURCE_ARCHS disappears.
It's something like this:
$ make ALLSOURCE_ARCHS="x86 mips arm" tags cscope
Signed-off-by: Jike Song <albcamus@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Dave Jones, in his blog, had some feedback about the bootchart script:
Primarily his complaint was that shorter delays weren't visualized.
The reason for that was that too small delays will have their labels
mixed up in the graph in an unreadable mess.
This patch has a fix for this; for one, it makes the output wider,
so more will fit.
The second part is that smaller delays are now shown with a
much smaller font for the label; while this isn't per se
readable at a 1:1 zoom, at least you can zoom in with most SVG
viewing applications and see what it is you are looking at.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Rafael reported:
I get the following error from 'make modules_install' on my test boxes:
HOSTCC firmware/ihex2fw
/home/rafael/src/linux-2.6/firmware/ihex2fw.c:268: fatal error: opening dependency file firmware/.ihex2fw.d: Read-only file system
compilation terminated.
make[3]: *** [firmware/ihex2fw] Error 1
make[2]: *** [_modinst_post] Error 2
make[1]: *** [sub-make] Error 2
make: *** [all] Error 2
where the configuration is that the kernel is compiled on a build box
with 'make O=<destdir> -j5' and then <destdir> is mounted over NFS read-only by
each test box (full path to this directory is the same on the build box and on
the test boxes). Then, I cd into <destdir>, run 'make modules_install' and get
the error above.
The issue turns out to be that we when we install firmware pick
up the list of firmware blobs from firmware/Makefile.
And this triggers the Makefile rules to update ihex2fw.
There were two solutions for this issue:
1) Move the list of firmware blobs to a separate file
2) Avoid ihex2fw rebuild by moving it to scripts
As I seriously beleive that the list of firmware blobs should be
done in a fundamental different way solution 2) was selected.
Reported-and-tested-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Impact: Resolves build failures in some configurations
Makes it possible to disable CONFIG_RD_GZIP . In that case, the
built-in initramfs will be compressed by whatever compressor is
available (bzip2 or lzma) or left uncompressed if none is available.
It also removes a couple of warnings which occur when no ramdisk
compression at all is chosen.
It also restores the select ZLIB_INFLATE in drivers/block/Kconfig
which somehow came missing. This is needed to activate compilation of
the stuff in zlib_deflate.
Signed-off-by: Alain Knaff <alain@knaff.lu>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Clean up checkpatch using perlcritic.
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In the general use case struct file_operations should be a const object.
Check for and warn where it is not. As suggested by Steven and Ingo.
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When checking for assignments within if conditionals we check the whole of
the condition, but the match is performed using a line constrained regular
expression. This means we can miss split conditionals or those on the
second line. Allow the check to span lines.
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ensure we do not report identifiers containing the word static as static
declarations. For example this should not be reported as an unecessary
assignement of 0:
long nr_static = 0;
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When picking up a complete statement or block for analysis we cannot
simply track open/close/etc parenthesis we must take into account
preprocessor section boundaries.
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We are miscategorising a continuation fragment following an operator
which may lead to us thinking that there is a space after it when there is
not. Fix this up.
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Loosen spacing checks to correctly detect this valid use of a typedef:
typedef struct rcu_data *(*get_data_func)(int);
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Seems like every other release we have someone who updates vmlinux.lds.h
and adds C-visible symbols without VMLINUX_SYMBOL() around them. So start
checking the file and reject assignments which have plain symbols on
either side.
[apw@canonical.com: soften the check, add tests]
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It seems to be a common idiom to include braces on conditionals in all
contexts including return. Allow this exception to the return is not a
function checks. Reported by Kay Sievers.
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some people work internally with -p0-patches which has the danger that one
forgets to convert them to -p1 before mainlining. Bitten myself and seen
p0-patches in mailing lists occasionally, this patch adds a warning to
checkpatch.pl in case a patch is -p0. If you really want, you can fool
this check to generate false positives, this is why it just spits a
warning. Making the check 100% proof is trickier than it looks, so let's
start with a version which catches the cases of real use.
[apw@canonical.com: update message language, handle null prefix, add tests]
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Disallow spaces within multiple pointer stars (*) in both casts and
definitions. Both of these would now be reported:
(char * *)
char * *foo;
Also now consistently detects and reports the attributes within these
structures making the error report itself clearer.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When we are detecting whether a comment is open when we start a hunk we
check for the first comment edge in the hunk and assume its inverse.
However if the hunk contains something like below, then we will assume
that a comment was open. Update this heuristic to see if the comment edge
is obviously within double quotes and ignore it if so:
foo(" */);
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Detect the colons (:) which make up secondary bitfield declarations and
apply binary colon checks. For example the following is common idiom:
int foo:1,
bar:1;
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add __weak as an official attribute. This tends to be used in a location
where the automated attribute detector misses it.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ensure we do not trigger the complex macros checks on structure member
assignment, for example:
#define foo .bar = 10
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some people use double star '**' as a comment continuation, and start
comments with complete lines of stars. Widen the implied comment
detection to pick these up.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When detecting implied comments from leading stars we may incorrectly
think we have detected an edge one way or the other when we have not if we
drop off the end of the last hunk. Fix this up.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
in_atomic() is not for driver use so report any such use as an ERROR.
Also in_atomic() is often used to determine if we may sleep, but it is not
reliable in this use model therefore strongly discourage its use.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We're struggling all the time to figure out where the code came from that
oopsed.. The script below (a adaption from a script used by
kerneloops.org) can help developers quite a bit, at least for non-module
cases.
It works and looks like this:
[/home/arjan/linux]$ dmesg | perl scripts/markup_oops.pl vmlinux
{
struct agp_memory *memory;
memory = agp_allocate_memory(agp_bridge, pg_count, type);
c055c10f: 89 c2 mov %eax,%edx
if (memory == NULL)
c055c111: 74 19 je c055c12c <agp_allocate_memory_wrap+0x30>
/* This function must only be called when current_controller != NULL */
static void agp_insert_into_pool(struct agp_memory * temp)
{
struct agp_memory *prev;
prev = agp_fe.current_controller->pool;
c055c113: a1 ec dc 8f c0 mov 0xc08fdcec,%eax
*c055c118: 8b 40 10 mov 0x10(%eax),%eax <----- faulting instruction
if (prev != NULL) {
c055c11b: 85 c0 test %eax,%eax
c055c11d: 74 05 je c055c124 <agp_allocate_memory_wrap+0x28>
prev->prev = temp;
c055c11f: 89 50 04 mov %edx,0x4(%eax)
temp->next = prev;
c055c122: 89 02 mov %eax,(%edx)
}
agp_fe.current_controller->pool = temp;
c055c124: a1 ec dc 8f c0 mov 0xc08fdcec,%eax
c055c129: 89 50 10 mov %edx,0x10(%eax)
if (memory == NULL)
return NULL;
agp_insert_into_pool(memory);
so in this case, we faulted while dereferencing agp_fe.current_controller
pointer, and we get to see exactly which function and line it affects...
Personally I find this very useful, and I can see value for having this
script in the kernel for more-than-just-me to use.
Caveats:
* It only works for oopses not-in-modules
* It only works nicely for kernels compiled with CONFIG_DEBUG_INFO
* It's not very fast.
* It only works on x86
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Impact: Bug fix
If bzip2 or lzma fails (for example, if they aren't installed on the
system), we need to propagate the failure out to "make". However,
they were masked by being followed by a semicolon.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Impact: Replaces inflate.c with a wrapper around zlib_inflate; new library code
This is the first part of the bzip2/lzma patch
The bzip patch is based on an idea by Christian Ludwig, includes support for
compressing the kernel with bzip2 or lzma rather than gzip. Both
compressors give smaller sizes than gzip. Lzma's decompresses faster
than bzip2.
It also supports ramdisks and initramfs' compressed using these two
compressors.
The functionality has been successfully used for a couple of years by
the udpcast project
This version applies to "tip" kernel 2.6.28
This part contains:
- changed inflate.c to accomodate rest of patch
- implementation of bzip2 compression (not used at this stage yet)
- implementation of lzma compression (not used at this stage yet)
- Makefile routines to support bzip2 and lzma kernel compression
Signed-off-by: Alain Knaff <alain@knaff.lu>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
The new check for asm/types.h and linux/types.h had
a few false positives.
o We cannot let linux/types.h include linux/types.h
o The int-ll64.h and int-ll64.h define the types
and are included by linux/types.h
Handle this by hardcoding the filenames in the headers_check script.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
If we see __[us](8|16|32|64) then we must include <linux/types.h>
If wee see include of <asm/types.h> then we recommend <linux/types.h>
Original script from Mike but modified by me.
Cc: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Headers in userspace should be using the __xxx__ form of the asm, inline,
and volatile keywords. Since people like to revert these things without
realizing what's going on, have the headers install step autoconvert these
keywords.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Since prototypes with "extern" refer to kernel functions, they make no
sense in userspace, so reject them automatically.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
[sam: made it into a warning]
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
We now say where we detect the second source of a file,
and where we detect a recursively source of the same file.
This makes it easier to fix such errors.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-next: (25 commits)
allow stripping of generated symbols under CONFIG_KALLSYMS_ALL
kbuild: strip generated symbols from *.ko
kbuild: simplify use of genksyms
kernel-doc: check for extra kernel-doc notations
kbuild: add headerdep used to detect inclusion cycles in header files
kbuild: fix string equality testing in tags.sh
kbuild: fix make tags/cscope
kbuild: fix make incompatibility
kbuild: remove TAR_IGNORE
setlocalversion: add git-svn support
setlocalversion: print correct subversion revision
scripts: improve the decodecode script
scripts/package: allow custom options to rpm
genksyms: allow to ignore symbol checksum changes
genksyms: track symbol checksum changes
tags and cscope support really belongs in a shell script
kconfig: fix options to check-lxdialog.sh
kbuild: gen_init_cpio expands shell variables in file names
remove bashisms from scripts/extract-ikconfig
kbuild: teach mkmakfile to be silent
...
Building upon parts of the module stripping patch, this patch
introduces similar stripping for vmlinux when CONFIG_KALLSYMS_ALL=y.
Using CONFIG_KALLSYMS_STRIP_GENERATED reduces the overhead of
CONFIG_KALLSYMS_ALL from 245k/310k to 65k/80k for the (i386/x86-64)
kernels I tested with.
The patch also does away with the need to special case the kallsyms-
internal symbols by making them available even in the first linking
stage.
While it is a generated file, the patch includes the changes to
scripts/genksyms/keywords.c_shipped, as I'm unsure what the procedure
here is.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
This patch changes the way __crc_ symbols are being resolved from
using ld to do so to using the assembler, thus allowing these symbols
to be marked local (the linker creates then as global ones) and hence
allow stripping (for modules) or ignoring (for vmlinux) them. While at
this, also strip other generated symbols during module installation.
One potentially debatable point is the handling of the flags passeed
to gcc when translating the intermediate assembly file into an object:
passing $(c_flags) unchanged doesn't work as gcc passes --gdwarf2 to
gas whenever is sees any -g* option, even for -g0, and despite the
fact that the compiler would have already produced all necessary debug
info in the C->assembly translation phase. I took the approach of just
filtering out all -g* options, but an alternative to such negative
filtering might be to have a positive filter which might, in the ideal
case allow just all the -Wa,* options to pass through.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Add functionality to check for function parameters or structure (or
union/typedef/enum) field members that are described in kernel-doc but
are not part of the expected (declared) parameters or structure.
These generate warnings that are called "Excess" descriptions.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
- fix combining O=... and tags
- don't allow * expansion during sh function calls
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
[sam: use KBUILD_SRC to check if we use O=...]
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Impact: let the function-graph-tracer be aware of the irq entrypoints
Add a new .irqentry.text section to store the irq entrypoints functions
inside the same section. This way, the tracer will be able to signal
an interrupts triggering on output by recognizing these entrypoints.
Also, make this section recordable for dynamic tracing.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Given that there is no usage of a TAR_IGNORE variable remove it
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Print svn revision in addition to git info on git-svn repos.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Output svn revision of latest change, instead of repo revision as thats
what we're interested in (especially when working on a branch/tag).
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
kerneloops.org has been using an improved "decodecode" script,
specifically it has a special marker that shows which line in the assembly
the oops happened at, like this:
20: 83 e0 03 and $0x3,%eax
23: 09 d8 or %ebx,%eax
25: 85 db test %ebx,%ebx
27: 89 02 mov %eax,(%edx)
29: 74 0f je 0x3a
2b:* 3b 73 04 cmp 0x4(%ebx),%esi <-- trapping instruction
2e: 75 05 jne 0x35
30: 89 53 04 mov %edx,0x4(%ebx)
33: eb 07 jmp 0x3c
35: 89 53 08 mov %edx,0x8(%ebx)
this patch updates the kernel copy to also have this functionality.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Reviewed-by: WANG Cong <wangcong@zeuux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Add a RPMOPTS make variable to allow arbitrary options to be passed
to rpm during 'make rpm-pkg'. For example:
make RPMOPTS="--define '_topdir /home/jk/rpm'" rpm-pkg
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
This adds an "override" keyword for use in *.symvers / *.symref files.
When a symbol is overridden, the symbol's old definition will be used for
computing checksums instead of the new one, preserving the previous
checksum. (Genksyms will still warn about the change.)
This is meant to allow distributions to hide minor actual as well as fake
ABI changes. (For example, when extra type information becomes available
because additional headers are included, this may change checksums even
though none of the types used have actully changed.)
This approach also allows to get rid of "#ifdef __GENKSYMS__" hacks in the
code, which are currently used in some vendor kernels to work around
checksum changes.
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Sometimes it is preferable to avoid changes of exported symbol checksums
(to avoid breaking externally provided modules). When a checksum change
occurs, it can be hard to figure out what caused this change: underlying
types may have changed, or additional type information may simply have
become available at the point where a symbol is exported.
Add a new --reference option to genksyms which allows it to report why
checksums change, based on the type information dumps it creates with the
--dump-types flag. Genksyms will read in such a dump from a previous run,
and report which symbols have changed (and why).
The behavior can be controlled for an entire build as follows: If
KBUILD_SYMTYPES is set, genksyms uses --dump-types to produce *.symtypes
dump files. If any *.symref files exist, those will be used as the
reference to check against. If KBUILD_PRESERVE is set, checksum changes
will fail the build.
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
as they do not benefit from the make functionality.
Moving the support to a shell script has several benefits:
- The readability of the code has increased a lot
- More people is able to extend the tags support
- We see less changes to the top-level Makefile
The shell script version includes improvements from:
Alexey Dobriyan <adobriyan@gmail.com> (jump to kconfig symbols)
Alexey Dobriyan <adobriyan@gmail.com> (drop ./ in paths)
Ian Campbell <ijc@hellion.org.uk> (simplified find algorithms)
This version has a few caveats:
=> It does not support ALLSOURCE_ARCHS
- it is easy to add if it is really used
=> It assumes all archs have moved to arch/$ARCH/include
- until that happens we have a few additional hits in the archs
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Tested-by: Ian Campbell <ijc@hellion.org.uk>
unbashify-extract-ikconfig.patch
scripts/extract-ikconfig contains a lot of gratuituous bashisms,
which make it fail if /bin/sh isn't bash. This patch replaces them
with regular Bourne shell constructs.
Signed-off-by: Werner Almesberger <werner@openmoko.org>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com> # as file author
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Convert a few echos in the build system to new $(kecho) so we get correct
output according to build verbosity.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
[sam: added kecho in a few more places for O=... builds]
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
There is a bunch of places in the build system where we do 'echo' to show
some nice status lines. This means we still get output when running in
silent mode. So declare a new KECHO variable that only does 'echo' when we
are in a suitable verbose build mode.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
[sam: added Documentation]
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
The mkcompile_h script does `echo` regardless of silent mode the make is
running at, so have it respect $quiet from kbuild and only echo when not in
silent mode.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
kbuild failed to expand include flags in KBUILD_CPPFLAGS
resulting in code like this in arch Makefiles:
ifeq ($(KBUILD_SRC),)
KBUILD_CPPFLAGS += -Iinclude/foo
else
KBUILD_CPPFLAGS += -I$(srctree)/include/foo
endif
Move use of LINUXINCLUDE into Makefile.lib to allow
us to expand -I directives of KBUILD_CPPFLAGS so
we can avoid the above code.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
When adding extra -I options with O=... we could
end up in a situation where there were no parameters to -I.
So we had a commandline that looked like this:
... -I -Wall ...
This had the undesired side effect that gcc assumed "-Wall"
was a path to look for include files so this options was
effectively ignored.
This happens only when we build the generated module.mod.c files
as part of the final modules builds and is as such harmless
with current kbuild.
This bug was exposed when we rearranged the options to gcc.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
The method for listing varargs in kernel-doc notation is:
* @...: these arguments are printed by the @fmt argument
but scripts/kernel-doc is confused: it always lists varargs as:
... variable arguments
and ignores the @...: line's description, but then prints that
line after the list of function parameters as though it's
not part of the function parameters.
This patch makes kernel-doc print the supplied @... description if it is
present; otherwise a boilerplate "variable arguments" is printed.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Impact: new "power-tracer" ftrace plugin
This patch adds a C/P-state ftrace plugin that will generate
detailed statistics about the C/P-states that are being used,
so that we can look at detailed decisions that the C/P-state
code is making, rather than the too high level "average"
that we have today.
An example way of using this is:
mount -t debugfs none /sys/kernel/debug
echo cstate > /sys/kernel/debug/tracing/current_tracer
echo 1 > /sys/kernel/debug/tracing/tracing_enabled
sleep 1
echo 0 > /sys/kernel/debug/tracing/tracing_enabled
cat /sys/kernel/debug/tracing/trace | perl scripts/trace/cstate.pl > out.svg
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: widen the scope of recordmcount.pl
Besides .text section, there are three .text sections that won't
be freed after kernel booting. They are: .sched.text, .spinlock.text
and .kprobes.text, which contain functions we can trace. But the last
section ".kprobes.text" is particular, which has been marked as "notrace",
we ignore it. Thus we add other two sections.
Signed-off-by: Liming Wang <liming.wang@windriver.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: extend scripts/recordmcount.pl to ARM
Arm uses %progbits instead of @progbits and requires only 4 byte alignment.
[ Thanks to Sam Ravnborg for mentioning that ARM uses %progbits ]
Signed-off-by: Jim Radford <radford@galvanix.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: extend scripts/recordmcount.pl with default alignment for SH
Set $alignment=2 for the sh architecture so that a ".align 2" directive
will be emitted for all __mcount_loc sections. Fix a whitspace error
while I'm here (converted spaces to tabs).
Signed-off-by: Matt Fleming <mjf@gentoo.org>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup of recordmcount.pl
Now that more architectures are being ported to the MCOUNT_RECORD
method, there is no reason to have each declare their own arch
specific variable if most of them share the same value. This patch
creates a set of default values for the arch specific variables
based off of i386.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: Add PowerPC port to recordmcount.pl script
This patch updates the recordmcount.pl script to process
PowerPC.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
First cut at dynamic ftrace support.
[
Steven Rostedt - only updated the recordmcount.pl file.
There are updates for PowerPC that will conflict with this,
and we need to base off of these changes.
]
Signed-off-by: Matt Fleming <mjf@gentoo.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Since this scripts output is usually redirected, put error messages
on standard error and exit with error code if no data is found.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
Fix the following warning from the perl syntax checking tool perlcritic.
This tool is a lint like tool that checks for perl best practices.
Loop iterator is not lexical at line 113, column 1.
See page 108 of PBP. (Severity: 5)
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The below is a simplistic fix for "make deb-pkg"; it splits the
firmware out to a linux-firmware-image package and adds an
(unversioned) Suggests to the linux package for this firmware.
Signed-Off-By: Jonathan McDowell <noodles@earth.li>
Acked-by: Frans Pop <elendil@planet.nl>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Impact: add alignment option for recordmcount.pl script
Align the __mcount_loc sections so that architectures with strict
alignment requirements need not worry about performing unaligned
accesses.
This fixes an issue where I was seeing unaligned accesses, which are not
supported on our architecture (the results of an unaligned access are
undefined).
Signed-off-by: Matt Fleming <matthew.fleming@imgtec.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
Sam Ravnborg pointed out that I could condense the code for the parameters of
recordmcount.pl by using an $(if ...) condition.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fix headers_install.pl and headers_check.pl to be compatible with versions
of Perl less than 5.6.0. It has been tested with Perl 5.005_03 and 5.8.8.
I realize this may not be an issue for most people, but there will still
be some that hit it, I imagine. There are three basic issues:
1. Prior to 5.6.0 open() only used 2 arguments, and the versions of
the scripts in 2.6.27.1 use 3.
2. 5.6.0 also introduced the ability to use uninitialized scalar
variables as file handles, which the current scripts make use of.
3. Lastly, 5.6.0 also introduced the pragma 'use warnings'. We can use
the -w switch and be backwards compatible.
Signed-off-by: Jeremy Huntwork <jhuntwork@lightcubesolutions.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
setlocalversion used to use an abbreviated git commit sha1 to generate the
tag. This was changed in commit d882421f4e
"kbuild: change CONFIG_LOCALVERSION_AUTO to use a git-describe-ish format"
to use git describe to come up with a tag. Which is nice, but git describe
sometimes can't describe the revision.
Commit 56b2f0706d ("setlocalversion: do not
describe if there is nothing to describe") addressed this, but there is still
no tag generated.
So, generate a plain abbreviated sha1 tag like setlocalversion used to when
git describe comes up short.
Signed-off-by: Trent Piepho <tpiepho@freescale.com>
CC: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
This fixes a compile time warning which occurs whenever a static library
is linked into a kernel module. MODPOST tries to look for a
".<modulename>.cmd" file to look for its dependencies, but that file
doesn't exist or get generated for static libraries.
This patch prevents modpost from looking for a .cmd file when a module is
linked with a static library
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Ashutosh Naik <ashutosh.naik@gmail.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Taken from http://bugzilla.kernel.org/show_bug.cgi?id=11567
If you even define KBUILD_EXTRA_SYMBOLS in Makefile it will not be expanded
into command line argument for modpost.
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Make the checksyscalls script work even on systems where sed is non-gnu.
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Currently, if we do a 'make rpm-pkg' without the _smp_mflags rpm macro
defined, the build fails with:
[snip]
Executing(%build): /bin/bash -e /var/tmp/rpm-tmp.67959
+ umask 022
+ cd /home/jk/devel/kernel-snapshot/rpm/BUILD
+ cd kernel-2.6.26
+ make clean
+ make '%{_smp_mflags}'
make[3]: *** No rule to make target `%{_smp_mflags}'. Stop.
error: Bad exit status from /var/tmp/rpm-tmp.67959 (%build)
This change uses the 'null if not set' reference to the _smp_mflags
macro instead.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
The number of pending changes is pretty useless, so encoding it into the
version is just annoying by the constant shuffle in corresponding modules.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
This is patch to fix incorrect mkspec script to make rpm correctly at 2.6.27 vanilla kernel.
This is regression in 2.6.27. 2.6.26 make rpm work good.
In 2.6.27 'make rpm' say error from rpmbuild "Many unpacked files (*.fw)."
Signed-off-by: Evgeniy Manachkin <sfstudio@mail.ru>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Stable <stable@kernel.org>
* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (31 commits)
ftrace: fix current_tracer error return
tracing: fix a build error on alpha
ftrace: use a real variable for ftrace_nop in x86
tracing/ftrace: make boot tracer select the sched_switch tracer
tracepoint: check if the probe has been registered
asm-generic: define DIE_OOPS in asm-generic
trace: fix printk warning for u64
ftrace: warning in kernel/trace/ftrace.c
ftrace: fix build failure
ftrace, powerpc, sparc64, x86: remove notrace from arch ftrace file
ftrace: remove ftrace hash
ftrace: remove mcount set
ftrace: remove daemon
ftrace: disable dynamic ftrace for all archs that use daemon
ftrace: add ftrace warn on to disable ftrace
ftrace: only have ftrace_kill atomic
ftrace: use probe_kernel
ftrace: comment arch ftrace code
ftrace: return error on failed modified text.
ftrace: dynamic ftrace process only text section
...
This script parses a function trace and then produces a hierarchical
view of the function call stack after processing it into a tree.
Changes on V2 thanks to the trace sent by Steven:
- Support both the files "trace" and "trace_pipe" (comments and space
differences)
- Correct the mini HOW-TO at the beginning.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Allow macros that are annotated with kernel-doc to contain whitespace
between the '#' and "define". It's valid and being used, so allow it.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If you use KCONFIG_ALLCONFIG (even with empty file) you get broken
allmodconfig/allyesconfig; CONFIG_MODULES gets turned off, with obvious
massive fallout.
Breakage had been introduced when conf_set_all_new_symbols() got used
for allmodconfig et.al.
What happens is that sym_calc_value(modules_sym) done in
conf_read_simple() sets SYMBOL_VALID on both modules_sym and MODULES.
When we get to conf_set_all_new_symbols(), we set sym->def[S_DEF_USER]
on everything, but it has no effect on sym->curr for the symbols that
already have SYMBOL_VALID - these are stuck.
Solution: use sym_clear_all_valid() in there. Note that it makes
reevaluation of modules_sym redundant - sym_clear_all_valid() will do
that itself.
[ Fixes http://bugzilla.kernel.org/show_bug.cgi?id=11512, says Alexey ]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
math-emu: Fix thinko in _FP_DIV
math-emu: Fix signalling of underflow and inexact while packing result.
sparc: Add checkstack support
sparc: correct section of current_pc()
sparc: correct section of apc_no_idle
sparc64: Fix race in arch/sparc64/kernel/trampoline.S
The text section stays in memory without ever leaving. With the exception
of modules, but modules know how to handle that case. With the dynamic
ftrace tracer, we need to make sure that it does not try to modify code
that no longer exists. The only safe section is .text.
This patch changes the recordmcount script to only record the mcount calls
in the .text sections.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The recordmcount script requires that the actual arch is passed in.
This works well when ARCH=i386 or ARCH=x86_64 but does not handle the
case of ARCH=x86.
This patch adds a parameter to the function to pass in the number of
bits of the architecture. So that it can determine if x86 should be
run for x86_64 or i386 archs.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Teach scripts/kconfig/Makefile and top-level Makefile that arch/*/Makefile
is allowed to say Kconfig := <whatever I want instead of arch/blah/Kconfig>.
Rewrite arch/um/Kconfig and arch/um/Kconfig.<subarch> so that the latter
would be top-level one (and include the pieces of the former).
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
When bootgraph.pl parses a file, it gives one row for each initcall's
pid. But they are displayed in random (perl hash) order. Let's
sort the pids by the start time of their first initcall instead.
This helps trace module initcalls, where each has a separate pid.
bootgraph.pl will show module initcalls during the initramfs; it may
also be adapted to show subsequent module initcalls.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Acked-by: Frédéric Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
As a perl novice, I would prefer to have the benefit of the interpreters'
wisdom. It turns out there were already some warnings, so let's fix them.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Acked-by: Frédéric Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Update assorted email addresses and related info to point
to a single current, valid address.
additionally
- trivial CREDITS entry updates. (Not that this file means much any more)
- remove arjans dead redhat.com address from powernow driver
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The generated 'capflags.c' file wasn't properly ignored, and the list of
files in scripts/basic/ wasn't up-to-date.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (46 commits)
UIO: Fix mapping of logical and virtual memory
UIO: add automata sercos3 pci card support
UIO: Change driver name of uio_pdrv
UIO: Add alignment warnings for uio-mem
Driver core: add bus_sort_breadthfirst() function
NET: convert the phy_device file to use bus_find_device_by_name
kobject: Cleanup kobject_rename and !CONFIG_SYSFS
kobject: Fix kobject_rename and !CONFIG_SYSFS
sysfs: Make dir and name args to sysfs_notify() const
platform: add new device registration helper
sysfs: use ilookup5() instead of ilookup5_nowait()
PNP: create device attributes via default device attributes
Driver core: make bus_find_device_by_name() more robust
usb: turn dev_warn+WARN_ON combos into dev_WARN
debug: use dev_WARN() rather than WARN_ON() in device_pm_add()
debug: Introduce a dev_WARN() function
sysfs: fix deadlock
device model: Do a quickcheck for driver binding before doing an expensive check
Driver core: Fix cleanup in device_create_vargs().
Driver core: Clarify device cleanup.
...
When specifying case we may have comments and/or braces at the end without
actually having a 'statement'. Allow for these to occur in any order.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When ignoring a macro in the middle of a conditional, we need to ignore
the macro start and any continuation lines.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When reporting some complex trailing statements we report only the
starting line of the error, that tends to imply the shown line is in error
and confuse the reader. As we do know where the actual error is report
that line too with an appropriate gap marker where applicable.
#ERROR: trailing statements should be on next line
#1: FILE: Z202.c:1:
+ for (pbh = page_buffers(bh->b_page); pbh != bh;
+ pbh = pbh->b_this_page, key++);
#ERROR: trailing statements should be on next line
#4: FILE: Z202.c:4:
+ for (pbh = page_buffers(bh->b_page);
[...]
+ pbh = pbh->b_this_page, key++);
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When we want to confirm an export is directly after its definition we need
to allow for DEFINE_ style macros. Add these to the execeptions.
Refactor the exceptions.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We are missing 'simple' values which include square brackets. Refactor to
ensure we handle nesting correctly and detect these simple forms.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When we hit and #else or #elif we know we are meeting an alternative piece
of code. All bets are off on indent if we did not see the open of the
control so stop checking.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Within the type checker we have a number of common kernel types which must
be implemented as typedefs. Pull those out so that we can use the same
expressions to trigger exclusions.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We are likely going to have 24 bit types. Expand the type matcher to
match any size.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We often see macros which define structure members, these are not complex
and necessarily do not have braces or brackets. For example:
#define _PLIST_HEAD_INIT(head) \
.prio_list = LIST_HEAD_INIT((head).prio_list), \
.node_list = LIST_HEAD_INIT((head).node_list)
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If we have sufficient context detect and handle do without braces ({).
Else these incorrectly trigger a trailing statements error for the
associated while.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A label is not a candidate for a possible type. Exclude them.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A do without braces '{' may trigger a false possible type 'do' and then
this may be interpreted as an external definition of foo():
do
foo();
while (bar);
Add do to the type exclusions. Fix up tests so we can check for them.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We should only apply source checks to lines within hunks. Checks which
are anchored in the context may falsly trigger in the commentory. Ensure
they only match within valid hunk lines.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Correct calculation of the number of lines of condition where we have
suspect indent.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Firmware may be included in the kernel as .ihex files. These are
inherantly text, but not source. The line ending checks are applicable to
these kinds of file, allow just these checks to apply to all files.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ensure that a close comment cannot incorrectly trigger in the middle of a
string. Reported by Jaswinder Singh.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Cc: Jaswinder Singh <jaswinder@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When the last hunk of a patch is short it will trigger errors from
checkpatch:
Use of uninitialized value in pattern match (m//)
at /usr/local/bin/checkpatch.pl line 394.
Use of uninitialized value in concatenation (.) or string
at /usr/local/bin/checkpatch.pl line 397.
Use of uninitialized value in pattern match (m//)
Avoid touching beyond the last line. Reported by Julien Brunel.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Cc: Julien Brunel <brunel@diku.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We should only be checking changes lines for the trailing statement check
on case/default statements.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
So that we eat our own dog food ensure the indent checks apply to perl
too.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Report the correct lines for single statement blocks. Currently we are
reporting the right number of lines, but not skipping the negative lines.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ensure that we handle literal %'s correctly when adjacent to a %Lx.
%Lx bad
%%Lx good
%%%Lx bad
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We should skip over and check the lines which follow preprocessor
statements, labels, and blank lines. These all have legitimate reasons to
be indented differently.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We are currently only reporting syspect indents if the conditional is
modified but the indent missmatch could be generated by the body changing,
make sure we catch both. Also only report the first line of the body, and
more importantly make sure we report the raw copy of the line. Finally
report the indent levels to make it easier to understand what is wrong.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Absolute references to kernel source files are generally only useful
locally to the originator of the patch. Check for any such references and
report them.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It is much more likely that an architecture file will want to directly
include asm header files. Reduce this WARNING to a CHECK when the
referencing file is in the arch directory.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It is possible to have other include/asm paths within the tree which are
not subject to the do not edit checks. Ignore those.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We are not counting the lines in the block correctly which causes the
comment scan to stop prematurly and thus miss comments which end at the
end of the block. Fix this up.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Only pull in new extension lines where the current contents ends with a \.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add the cacheline alignment modifiers to the attribute lists.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add support for direct testing of the attribute matcher, add basic tests
for it.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It is a common and sane idiom to allow a single return on the end of a
case statement:
switch (...) {
case foo: return bar;
}
Add an exception for this.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Labels have different indent rules and must be ignored when checking the
conditional indent levels. Also correct identify labels in single
statement conditionals.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It is possible to use double ampersand (&&) in unary context where it
means the address of a goto label. Handle spacing for it.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It is wholy reasonable to have square brackets representing array slices
in braces on the same line. These should be spaced.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Base infrastructure to enable per-module debug messages.
I've introduced CONFIG_DYNAMIC_PRINTK_DEBUG, which when enabled centralizes
control of debugging statements on a per-module basis in one /proc file,
currently, <debugfs>/dynamic_printk/modules. When, CONFIG_DYNAMIC_PRINTK_DEBUG,
is not set, debugging statements can still be enabled as before, often by
defining 'DEBUG' for the proper compilation unit. Thus, this patch set has no
affect when CONFIG_DYNAMIC_PRINTK_DEBUG is not set.
The infrastructure currently ties into all pr_debug() and dev_dbg() calls. That
is, if CONFIG_DYNAMIC_PRINTK_DEBUG is set, all pr_debug() and dev_dbg() calls
can be dynamically enabled/disabled on a per-module basis.
Future plans include extending this functionality to subsystems, that define
their own debug levels and flags.
Usage:
Dynamic debugging is controlled by the debugfs file,
<debugfs>/dynamic_printk/modules. This file contains a list of the modules that
can be enabled. The format of the file is as follows:
<module_name> <enabled=0/1>
.
.
.
<module_name> : Name of the module in which the debug call resides
<enabled=0/1> : whether the messages are enabled or not
For example:
snd_hda_intel enabled=0
fixup enabled=1
driver enabled=0
Enable a module:
$echo "set enabled=1 <module_name>" > dynamic_printk/modules
Disable a module:
$echo "set enabled=0 <module_name>" > dynamic_printk/modules
Enable all modules:
$echo "set enabled=1 all" > dynamic_printk/modules
Disable all modules:
$echo "set enabled=0 all" > dynamic_printk/modules
Finally, passing "dynamic_printk" at the command line enables
debugging for all modules. This mode can be turned off via the above
disable command.
[gkh: minor cleanups and tweaks to make the build work quietly]
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (55 commits)
HID: build drivers for all quirky devices by default
HID: add missing blacklist entry for Apple ATV ircontrol
HID: add support for Bright ABNT2 brazilian device
HID: Don't let Avermedia Radio FM800 be handled by usb hid drivers
HID: fix numlock led on Dell device 0x413c/0x2105
HID: remove warn() macro from usb hid drivers
HID: remove info() macro from usb HID drivers
HID: add appletv IR receiver quirk
HID: fix a lockup regression when using force feedback on a PID device
HID: hiddev.h: Fix example code.
HID: hiddev.h: Fix mixed space and tabs in example code.
HID: convert to dev_* prints
HID: remove hid-ff
HID: move zeroplus FF processing
HID: move thrustmaster FF processing
HID: move pantherlord FF processing
HID: fix incorrent length condition in hidraw_write()
HID: fix tty<->hid deadlock
HID: ignore iBuddy devices
HID: report descriptor fix for remaining MacBook JIS keyboards
...
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arjan/linux-2.6-fastboot:
raid, fastboot: hide RAID autodetect option if MD is compiled as a module
raid: make RAID autodetect default a KConfig option
warning: fix init do_mounts_md c
fastboot: make the RAID autostart code print a message just before waiting
fastboot: make the raid autodetect code wait for all devices to init
fastboot: Fix bootgraph.pl initcall name regexp
fastboot: fix issues and improve output of bootgraph.pl
Add a script to visualize the kernel boot process / time
When bootgraph.pl parses a file, it gives one row
for each initcall's pid. But only few of them will
be displayed => the longest.
This patch corrects it by giving only a rows for pids
which have initcalls that will be displayed.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The regexp used to match the start and the end of an initcall
are matching only on [a-zA-Z\_]. This rules out initcalls with
a number in them. This patch is fixing that.
Signed-off-by: Arnaud Patard <apatard@mandriva.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
David Sanders reported some issues with bootgraph.pl's display
of his sytems bootup; this commit fixes these by scaling the graph
not from 0 - end time but from the first initcall to the end time;
the minimum display size etc also now need to scale with this, as does
the axis display.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
When bootgraph.pl parses a file, it gives one row
for each initcall's pid. But only few of them will
be displayed => the longest.
This patch corrects it by giving only a rows for pids
which have initcalls that will be displayed.
[ mingo@elte.hu: resolved conflicts ]
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When optimizing the kernel boot time, it's very valuable to visualize
what is going on at which time. In addition, with the fastboot asynchronous
initcall level, it's very valuable to see which initcall gets run where
and when.
This patch adds a script to turn a dmesg into a SVG graph (that can be
shown with tools such as InkScape, Gimp or Firefox) and a small change
to the initcall code to print the PID of the thread calling the initcall
(so that the script can work out the parallelism).
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
The warning messages about old objcopy and local functions spam the
user quite drastically. Remove the warning until we can find a nicer
way of tell the user to upgrade their objcopy.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
CHK include/linux/version.h
CHK include/linux/utsrelease.h
CC scripts/mod/empty.o
/bin/sh: /usr/src/25/scripts/recordmcount.pl: Permission denied
We shouldn't assume that files have their `x' bits set. There are various
ways in which file permissions get lost, including use of patch(1).
It might not be correct to assume that perl lives in $PATH?
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The --globalize-symbols option came out in objcopy version 2.17.
If the kernel is being compiled on a system with a lower version of
objcopy, then we can not use the globalize / localize trick to
link to symbols pointing to local functions.
This patch tests the version of objcopy and will only use the trick
if the version is greater than or equal to 2.17. Otherwise, if an
object has only local functions within a section, it will give a
nice warning and recommend the user to upgrade their objcopy.
Leaving the symbols unrecorded is not that big of a deal, since the
mcount record method changes the actual mcount code to be a simple
"ret" without recording registers or anything.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
During tests and checks, I've discovered that there were failures to
convert mcount callers into nops. Looking deeper into these failures,
code that was attempted to be changed was not an mcount caller.
The current code only updates if the code being changed is what it expects,
but I still investigate any time there is a failure.
What was happening is that a weak symbol was being used as a reference
for other mcount callers. That weak symbol was also referenced elsewhere
so the offsets were using the strong symbol and not the function symbol
that it was referenced from.
This patch changes the setting up of the mcount_loc section to search
for a global function that is not weak. It will pick a local over a weak
but if only a weak is found in a section, a warning is printed and the
mcount location is not recorded (just to be safe).
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
I'm trying to keep all the arch changes in recordmcount.pl in one place.
I moved your code into that area, by adding the flags to the commands
that were passed in.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
I'm seeing when I use separate src/build dirs:
make[3]: *** [arch/x86/kernel/time_32.o] Error 1
/bin/sh: scripts/recordmcount.pl: No such file or directory
make[3]: *** [arch/x86/kernel/irq_32.o] Error 1
/bin/sh: scripts/recordmcount.pl: No such file or directory
make[3]: *** [arch/x86/kernel/ldt.o] Error 1
/bin/sh: scripts/recordmcount.pl: No such file or directory
make[3]: *** [arch/x86/kernel/i8259.o] Error 1
/bin/sh: scripts/recordmcount.pl: No such file or directory
This fixes it.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
hack around:
ld: Relocatable linking with relocations from format elf32-i386 (init/.tmp_gl_calibrate.o) to format elf64-x86-64 (init/.tmp_mx_calibrate.o) i CC arch/x86/mm/extable.o
objcopy: 'init/.tmp_mx_calibrate.o': No such file
rm: cannot remove `init/.tmp_mx_calibrate.o': No such file or directory
ld: Relocatable linking with relocations from format elf32-i386 (arch/x86/mm/extable.o) to format elf64-x86-64 (arch/x86/mm/.tmp_mx_extable.o) is not supported
mv: cannot stat `arch/x86/mm/.tmp_mx_extable.o': No such file or directory
ld: Relocatable linking with relocations from format elf32-i386 (arch/x86/mm/fault.o) to format elf64-x86-64 (arch/x86/mm/.tmp_mx_fault.o) is not supported
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch creates a section in the kernel called "__mcount_loc".
This will hold a list of pointers to the mcount relocation for
each call site of mcount.
For example:
objdump -dr init/main.o
[...]
Disassembly of section .text:
0000000000000000 <do_one_initcall>:
0: 55 push %rbp
[...]
000000000000017b <init_post>:
17b: 55 push %rbp
17c: 48 89 e5 mov %rsp,%rbp
17f: 53 push %rbx
180: 48 83 ec 08 sub $0x8,%rsp
184: e8 00 00 00 00 callq 189 <init_post+0xe>
185: R_X86_64_PC32 mcount+0xfffffffffffffffc
[...]
We will add a section to point to each function call.
.section __mcount_loc,"a",@progbits
[...]
.quad .text + 0x185
[...]
The offset to of the mcount call site in init_post is an offset from
the start of the section, and not the start of the function init_post.
The mcount relocation is at the call site 0x185 from the start of the
.text section.
.text + 0x185 == init_post + 0xa
We need a way to add this __mcount_loc section in a way that we do not
lose the relocations after final link. The .text section here will
be attached to all other .text sections after final link and the
offsets will be meaningless. We need to keep track of where these
.text sections are.
To do this, we use the start of the first function in the section.
do_one_initcall. We can make a tmp.s file with this function as a reference
to the start of the .text section.
.section __mcount_loc,"a",@progbits
[...]
.quad do_one_initcall + 0x185
[...]
Then we can compile the tmp.s into a tmp.o
gcc -c tmp.s -o tmp.o
And link it into back into main.o.
ld -r main.o tmp.o -o tmp_main.o
mv tmp_main.o main.o
But we have a problem. What happens if the first function in a section
is not exported, and is a static function. The linker will not let
the tmp.o use it. This case exists in main.o as well.
Disassembly of section .init.text:
0000000000000000 <set_reset_devices>:
0: 55 push %rbp
1: 48 89 e5 mov %rsp,%rbp
4: e8 00 00 00 00 callq 9 <set_reset_devices+0x9>
5: R_X86_64_PC32 mcount+0xfffffffffffffffc
The first function in .init.text is a static function.
00000000000000a8 t __setup_set_reset_devices
000000000000105f t __setup_str_set_reset_devices
0000000000000000 t set_reset_devices
The lowercase 't' means that set_reset_devices is local and is not exported.
If we simply try to link the tmp.o with the set_reset_devices we end
up with two symbols: one local and one global.
.section __mcount_loc,"a",@progbits
.quad set_reset_devices + 0x10
00000000000000a8 t __setup_set_reset_devices
000000000000105f t __setup_str_set_reset_devices
0000000000000000 t set_reset_devices
U set_reset_devices
We still have an undefined reference to set_reset_devices, and if we try
to compile the kernel, we will end up with an undefined reference to
set_reset_devices, or even worst, it could be exported someplace else,
and then we will have a reference to the wrong location.
To handle this case, we make an intermediate step using objcopy.
We convert set_reset_devices into a global exported symbol before linking
it with tmp.o and set it back afterwards.
00000000000000a8 t __setup_set_reset_devices
000000000000105f t __setup_str_set_reset_devices
0000000000000000 T set_reset_devices
00000000000000a8 t __setup_set_reset_devices
000000000000105f t __setup_str_set_reset_devices
0000000000000000 T set_reset_devices
00000000000000a8 t __setup_set_reset_devices
000000000000105f t __setup_str_set_reset_devices
0000000000000000 t set_reset_devices
Now we have a section in main.o called __mcount_loc that we can place
somewhere in the kernel using vmlinux.ld.S and access it to convert
all these locations that call mcount into nops before starting SMP
and thus, eliminating the need to do this with kstop_machine.
Note, A well documented perl script (scripts/recordmcount.pl) is used
to do all this in one location.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This makes modpost handle MODULE_DEVICE_TABLE(dmi, xxxx).
I had to change the string pointers in the match table to char arrays,
and picked a size of 79 bytes almost at random -- do we need to make it
bigger than that? I was a bit concerned about the 'bloat' this
introduces into the match tables, but they should all be __initdata so
it shouldn't matter too much.
(Actually, modpost does go through the relocations and look at most of
them; it wouldn't be impossible to make it handle string pointers -- but
doesn't seem to be worth the effort, since they're __initdata).
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
The regexp used to match the start and the end of an initcall
are matching only on [a-zA-Z\_]. This rules out initcalls with
a number in them. This patch is fixing that.
Signed-off-by: Arnaud Patard <apatard@mandriva.com>
David Sanders reported some issues with bootgraph.pl's display
of his sytems bootup; this commit fixes these by scaling the graph
not from 0 - end time but from the first initcall to the end time;
the minimum display size etc also now need to scale with this, as does
the axis display.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
When optimizing the kernel boot time, it's very valuable to visualize
what is going on at which time. In addition, with some of the initializing
going asynchronous soon, it's valuable to track/print which worker thread
is executing the initialization.
This patch adds a script to turn a dmesg into a SVG graph (that can be
shown with tools such as InkScape, Gimp or Firefox) and a small change
to the initcall code to print the PID of the thread calling the initcall
(so that the script can work out the parallelism).
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
We need to add a flag for all code that is in the drivers/staging/
directory to prevent all other kernel developers from worrying about
issues here, and to notify users that the drivers might not be as good
as they are normally used to.
Based on code from Andreas Gruenbacher and Jeff Mahoney to provide a
TAINT flag for the support level of a kernel module in the Novell
enterprise kernel release.
This is the code that actually modifies the modules, adding the flag to
any files in the drivers/staging directory.
Cc: Andreas Gruenbacher <agruen@suse.de>
Cc: Jeff Mahoney <jeffm@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
With -march=z990 and later gcc can use the long displacement facility
insruction lay for stack register handling. This patch adopts checkstack
to catch lay in addition to ahi and aghi.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* Theodore Ts'o (tytso@mit.edu) wrote:
>
> I've been playing with adding some markers into ext4 to see if they
> could be useful in solving some problems along with Systemtap. It
> appears, though, that as of 2.6.27-rc8, markers defined in code which is
> compiled directly into the kernel (i.e., not as modules) don't show up
> in Module.markers:
>
> kvm_trace_entryexit arch/x86/kvm/kvm-intel %u %p %u %u %u %u %u %u
> kvm_trace_handler arch/x86/kvm/kvm-intel %u %p %u %u %u %u %u %u
> kvm_trace_entryexit arch/x86/kvm/kvm-amd %u %p %u %u %u %u %u %u
> kvm_trace_handler arch/x86/kvm/kvm-amd %u %p %u %u %u %u %u %u
>
> (Note the lack of any of the kernel_sched_* markers, and the markers I
> added for ext4_* and jbd2_* are missing as wel.)
>
> Systemtap apparently depends on in-kernel trace_mark being recorded in
> Module.markers, and apparently it's been claimed that it used to be
> there. Is this a bug in systemtap, or in how Module.markers is getting
> built? And is there a file that contains the equivalent information
> for markers located in non-modules code?
I think the problem comes from "markers: fix duplicate modpost entry"
(commit d35cb360c2)
Especially :
- add_marker(mod, marker, fmt);
+ if (!mod->skip)
+ add_marker(mod, marker, fmt);
}
return;
fail:
Here is a fix that should take care if this problem.
Thanks for the bug report!
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Tested-by: "Theodore Ts'o" <tytso@mit.edu>
CC: Greg KH <greg@kroah.com>
CC: David Smith <dsmith@redhat.com>
CC: Roland McGrath <roland@redhat.com>
CC: Sam Ravnborg <sam@ravnborg.org>
CC: Wenji Huang <wenji.huang@oracle.com>
CC: Takashi Nishiie <t-nishiie@np.css.fujitsu.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit f072181e64 ("kconfig: drop the
""trying to assign nonexistent symbol" warning") simply dropped the
warnings, but it does a little more than that, it also marks the current
.config as needed saving, so add this back.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Recent changes to oldconfig have mixed up the silentoldconfig handling,
so this fixes that by clearly separating that special mode, e.g.
KCONFIG_NOSILENTUPDATE is only relevant here, the .config is written as
needed.
This will also properly close Bug 11230.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Struct members may be marked as private by using
/* private: */
before them, as noted in Documentation/kernel-doc-nano-HOWTO.txt
Fix kernel-doc to handle structs whose members are all private;
otherwise invalid XML is generated:
xmlto: input does not validate (status 3)
linux-2.6.27-rc6-git4/Documentation/DocBook/debugobjects.xml:146: element variablelist: validity error : Element variablelist content does not follow the DTD, expecting ((title , titleabbrev?)? , varlistentry+), got ()
Document linux-2.6.27-rc6-git4/Documentation/DocBook/debugobjects.xml does not validate
make[1]: *** [Documentation/DocBook/debugobjects.html] Error 3
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Reported-by: Roland McGrath <roland@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Sanders wrote:
> I'm getting this error:
> as: unrecognized option `-mtune=generic32'
> I have binutils 2.17.
Use -c instead of -S in cc-option and cc-option-yn, so we can probe
options related to the assembler.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: kbuild devel <kbuild-devel@lists.sourceforge.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In August 2006 I posted a patch generating a minimal SELinux policy. This
week, David P. Quigley posted an updated version of that as a patch against
the kernel. It also had nice logic for auto-installing the policy.
Following is David's original patch intro (preserved especially
bc it has stats on the generated policies):
se interested in the changes there were only two significant
changes. The first is that the iteration through the list of classes
used NULL as a sentinel value. The problem with this is that the
class_to_string array actually has NULL entries in its table as place
holders for the user space object classes.
The second change was that it would seem at some point the initial sids
table was NULL terminated. This is no longer the case so that iteration
has to be done on array length instead of looking for NULL.
Some statistics on the policy that it generates:
The policy consists of 523 lines which contain no blank lines. Of those
523 lines 453 of them are class, permission, and initial sid
definitions. These lines are usually little to no concern to the policy
developer since they will not be adding object classes or permissions.
Of the remaining 70 lines there is one type, one role, and one user
statement. The remaining lines are broken into three portions. The first
group are TE allow rules which make up 29 of the remaining lines, the
second is assignment of labels to the initial sids which consist of 27
lines, and file system labeling statements which are the remaining 11.
In addition to the policy.conf generated there is a single file_contexts
file containing two lines which labels the entire system with base_t.
This policy generates a policy.23 binary that is 7920 bytes.
(then a few versions later...):
The new policy is 587 lines (stripped of blank lines) with 476 of those
lines being the boilerplate that I mentioned last time. The remaining
111 lines have the 3 lines for type, user, and role, 70 lines for the
allow rules (one for each object class including user space object
classes), 27 lines to assign types to the initial sids, and 11 lines for
file system labeling. The policy binary is 9194 bytes.
Changelog:
Aug 26: Added Documentation/SELinux.txt
Aug 26: Incorporated a set of comments by Stephen Smalley:
1. auto-setup SELINUXTYPE=dummy
2. don't auto-install if selinux is enabled with
non-dummy policy
3. don't re-compute policy version
4. /sbin/setfiles not /usr/sbin/setfiles
Aug 22: As per JMorris comments, made sure make distclean
cleans up the mdp directory.
Removed a check for file_contexts which is now
created in the same file as the check, making it
superfluous.
Signed-off-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: David Quigley <dpquigl@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
With 22454cb99f we added only the
first entry of the device table. We need to loop over the whole
device list.
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
scripts/patch-kernel script can't patch a tree, say, from 2.6.25 to
2.6.26.1, because of a wrong comparison in context of patching 2.6.x base.
Fix it.
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Fix handling of nested structs or unions. The regex to strip (eliminate)
nested structs or unions was limited to only 0 or 1 matches. This can
cause an uneven number of left/right braces to be stripped, which causes
this:
Warning(linux-2.6.27-rc1-git2//include/net/mac80211.h:336): No description found for parameter '}'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes:
kconfig: drop the ""trying to assign nonexistent symbol" warning
kconfig: always write out .config
They really stand out now that make *config is less chatty - and
they are generally ignored - so drop them.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Adrian Bunk <bunk@kernel.org>
Always write out .config also in the case where config
did not change.
This fixes: http://bugzilla.kernel.org/show_bug.cgi?id=11230
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Cc: Adrian Bunk <bunk@kernel.org>
People don't like them and think they're errors.
Leave the __fw_install one though; when 'make firmware_install' does
nothing, it's best to have a 'Nothing to be done for...' message rather
than just doing nothing.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
It would have saved both a bug submitter and me a few hours if
scripts/ver_linux had picked the same gcc as the build.
Since I can't see any reason why it fiddles with PATH at all this patch
therefore removes the PATH setting.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
The extern flag currently is not included in type dump files
(genksyms --dump-types). Include that flag there for completeness.
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
We are having two kinds of problems with genksyms today: fake checksum
changes without actual ABI changes, and changes which we would rather like
to ignore (such as an additional field at the end of a structure that
modules are not supposed to touch, for example).
I have thought about ways to improve genksyms and compute checksums
differently to avoid those problems, but in the end I don't see a
fundamentally better way. So here are some genksyms patches for at least
making the checksums more easily manageable, if we cannot fully fix them.
In addition to the bugfixes (the first two patches), this allows genksyms
to track checksum changes and report why a checksum changed (third patch),
and to selectively ignore changes (fourth patch).
This patch:
Gcc __attribute__ definitions may occur repeatedly, e.g.,
static int foo __attribute__((__used__))
__attribute__((aligned (16)));
The genksyms parser does not understand this, and generates a syntax error.
Fix this case.
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
gcc 4.3 correctly determines that input() is unused and gives the
following warning:
<-- snip -->
...
HOSTCC scripts/genksyms/lex.o
scripts/genksyms/lex.c:1487: warning: ‘input’ defined but not used
...
<-- snip -->
Fix it by adding %option noinput to scripts/genksyms/lex.l and
regeneration of scripts/genksyms/lex.c_shipped.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
gcc 4.3 correctly determines that input() is unused and gives the
following warning:
<-- snip -->
...
HOSTCC scripts/kconfig/zconf.tab.o
scripts/kconfig/lex.zconf.c:1628: warning: ‘input’ defined but not used
...
<-- snip -->
Fix it by adding %option noinput to scripts/kconfig/zconf.l and
regeneration of scripts/kconfig/lex.zconf.c_shipped.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Spelling fixes in scripts/mod/modpost.c
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-next: (25 commits)
setlocalversion: do not describe if there is nothing to describe
kconfig: fix typos: "Suport" -> "Support"
kconfig: make defconfig is no longer chatty
kconfig: make oldconfig is now less chatty
kconfig: speed up all*config + randconfig
kconfig: set all new symbols automatically
kconfig: add diffconfig utility
kbuild: remove Module.markers during mrproper
kbuild: sparse needs CF not CHECKFLAGS
kernel-doc: handle/strip __init
vmlinux.lds: move __attribute__((__cold__)) functions back into final .text section
init: fix URL of "The GNU Accounting Utilities"
kbuild: add arch/$ARCH/include to search path
kbuild: asm symlink support for arch/$ARCH/include
kbuild: support arch/$ARCH/include for tags, cscope
kbuild: prepare headers_* for arch/$ARCH/include
kbuild: install all headers when arch is changed
kbuild: make clean removes *.o.* as well
kbuild: optimize headers_* targets
kbuild: only one call for include/ in make headers_*
...
Jan Engelhardt wrote:
> Just a note that when you run git-describe, you should probably quiten it.
>
> fatal: cannot describe 'bd7364a0fd5a4a2878fe4a224be1b142a4e6698e'
>
> This happens when tags are not present, which can happen if Linus's tree
> is sent upwards again, IOW:
>
> machine1$ git-clone torvalds/linux-2.6.git
> machine1$ git push elsewhere master
>
> machine2$ git-clone elsewhere:/linux
> machine2$ git-describe HEAD
> fatal: cannot describe that
Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc>
Acked-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
make defconfig generated a lot of output
then noone actually read.
Use conf_set_all_new_symbols() to generate the default
configuration and avoid the chatty output.
A typical run now looks like this:
$ make defconfig
*** Default configuration is based on 'i386_defconfig'
arch/x86/configs/i386_defconfig:13:warning: trying to assign nonexistent symbol SEMAPHORE_SLEEPERS
arch/x86/configs/i386_defconfig:176:warning: trying to assign nonexistent symbol PREEMPT_BKL
...
arch/x86/configs/i386_defconfig:1386:warning: trying to assign nonexistent symbol INSTRUMENTATION
$
As an added benefit we now clearly see the warnings generated
in the start of the process.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Previously when running "make oldconfig" we saw all the propmt lines
from kconfig and noone actully read this.
With this patch the user will only see output if there is new symbols.
This will be seen as "make oldconfig" runs which does not generate any output.
A typical run now looks like this:
$ make oldconfig
scripts/kconfig/conf -o arch/x86/Kconfig
$
If a new symbol is found then we restart the config process like this:
$ make oldconfig
scripts/kconfig/conf -o arch/x86/Kconfig
*
* Restart config...
*
*
* General setup
*
Prompt for development and/or incomplete code/drivers (EXPERIMENTAL) [Y/n/?] y
Local version - append to kernel release (LOCALVERSION) []
...
The bahaviour is similar to what we know when running the implicit
oldconfig target "make silentoldconfig".
"make silentoldconfig" are run as part of the kernel build process
if the configuration has changed.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Drop the chatty mode when we generate the all*config, randconfig
configurations.
Ths speeds up the process considerably and noone looked
at the output anyway.
This patch uses the conf_set_all_new_symbols() function
just added to kconfig.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Add conf_set_all_new_symbols() which set all symbols (which don't have a
value yet) to a specifed value.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Diffconfig is a simple utility for comparing two kernel configuration files.
See usage in the script for more info.
Signed-off-by: Tim Bird <tim.bird@am.sony.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Handle __init in functions with kernel-doc notation by stripping the
__init away from the output doc. This is already being done for
"__devinit". This patch fixes these kernel-doc error/aborts:
Error(linux-next-20080619//drivers/usb/gadget/config.c:132): cannot understand prototype: 'struct usb_descriptor_header **__init usb_copy_descriptors(struct usb_descriptor_header **src) '
Error(linux-next-20080619//drivers/usb/gadget/config.c:182): cannot understand prototype: 'struct usb_endpoint_descriptor *__init usb_find_endpoint( struct usb_descriptor_header **src, struct usb_descriptor_header **copy, struct usb_endpoint_descriptor *match ) '
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Factor out the headers_*_all support to a seperate
shell script and add support for arch specific
header files can be located in either
arch/$ARCH/include/asm
or
include/asm-$ARCH/
In "make help" always display the headers_* targets.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
We see some header files that are selected dependent on
the actual architecture so force a reinstallation
of all header files when the arch changes.
This slows down "make headers_check_all" but then
we better reflect reality.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Move the core functionality of headers_install
and headers_check to two small perl scripts.
The makefile is adapted to use the perl scrip and
changed to operate on all files in a directory.
So if one file is changed then all files in the
directory is processed.
perl were chosen for the helper scripts because this
is pure text processing which perl is good at and
especially the headers_check.pl script are expected to
see changes / new checks implmented.
The speed is ~300% faster on this box.
And the output generated to the screen is now down to
two lines per directory (one for install, one for check)
so it is easier to scroll back after a kernel build.
The perl scripts has been brought to sanity by patient
feedback from: Vegard Nossum <vegard.nossum@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Move it to the top-level file to decide if we install/check
the generic headers or the arch specific headers.
This revealed a long standing bug where "make headers_check_all"
relied on the files in asm/ for the current architecture.
So make headers_check_all is now broken by this commit.
In addition:
o add a simpler way to detect if an arch support
exporting header files.
o add 'set -e;' so we error out early if
make headers_check_all fails.
o add sparc64 and cris to arch we do not process
in make headers_*_all because:
sparc64 - use sparc to export headers
cris - is know seriously broken
Includes suggestions from: David Woodhouse
<dwmw2@infradead.org>.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: David Woodhouse <dwmw2@infradead.org>
ALTARCH is no longer used by any arch(*) so drop
support for this from Makefile.headerinst
Dropping ALTARCH support simplifies Makefile.headerinst
(*) sparc64 uses it but work is ongoing to drop it
and no furter usage is planned.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: David Miller <davem@davemloft.net>
unifdef utility is fast enough to warrant that we always
run the scripts through unifdef.
This patch runs all headers listed with header-y and unifdef-y
through unifdef.
Next step is to drop unifdef-y in all Kbuild files and
that can now be done in smaller steps.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Adrian Bunk <bunk@kernel.org>
This means that we no longer need write access to the source tree while
doing 'make modules_install'.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
uname -m was leaving a newline in $arch, and not passing the tests.
Also, printing the unknown arch on failure is probably helpful.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, checkstack.pl only looks for fixed subtractions from the stack
pointer. However, things like this:
void function(int size)
{
char stackbuster[size << 2];
...
are certainly worth pointing out, I think.
This could perhaps be done more cleanly, and the following patch only
adds "dynamic" REs for x86 and x86_64, but it works:
0x00b0 crypto_cbc_decrypt_inplace [cbc]: Dynamic (%rax)
0x00ad crypto_pcbc_decrypt_inplace [pcbc]: Dynamic (%rax)
0x02f6 crypto_pcbc_encrypt_inplace [pcbc]: Dynamic (%rax)
0x036c _crypto_xcbc_digest_setkey [xcbc]: Dynamic (%rax)
...
(Inspired by Keith Owens' old stack-check script)
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When checking spacing for pointer checks the type cannot start in the
middle of a word, ie. this is not 'int * bar':
x = fooint * bar;
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now that we have a variants system, move to using that to carry the
unary/binary designation for +, -, &, and *.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add checks for the question mark colon operator spacing, and also check
the other uses of colon. Colon means a number of things:
- it introduces the else part of the ?: operator,
- it terminates a goto label,
- it terminates the case value,
- it separates the identifier from the bit size on bit fields, and
- it is used to introduce option types in asm().
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add support for multiple modifiers such as:
int __one __two foo;
Also handle trailing known modifiers when defecting modifiers:
int __one foo __read_mostly;
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ensure we do not inadvertantly load known modifiers up as possible types.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Make sure we correctly mark the return type of the pointer to a function
declaration.
const void *(*sb_tag)(struct sysfs_tag_info *info);
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Exclude vmlinux.lds.h from the macro complexity checks. They will never
apply sanely here.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Although we are finding the added modifier in the declaration below
we are not correctly matching it as a type. Fix the declaration.
static void __ref *vmem_alloc_pages(unsigned int order)
{
}
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Improve type matcher debug so we can see what it does match. As part
of this move us to to using the common debug framework.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Correct spelling in the kfree reports.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
usb_free_urb() can take a NULL, so let's check and warn about that.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Check to see if the block/statement which a condition or loop introduces
is indented correctly.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Extend the trailing statement checks to report a trailing semi-colon ';'
as we really want it on the next line and indented so it is really really
obvious. Also extend the tests to include while and for.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Check on the spacing before square brackets. We should only allow spaces
there if this is part of a type definition or an initialialiser.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Report trailing statements on case and default lines.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Allow printk strings to break the 80 character width limits, thus keeping
them complete and searchable.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix end of statement location. Where the last line of the statement is
replaced we are miss reporting the newly added replacement an incorrectly
indented trailing statement for the negative context. We are also
incorrectly reporting negative statements generally.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We are incorrectly counting the lines in a block while accumulating
the trailing lines in a macro statement, leading to false positives.
Fix end of block handling and general counting for negative context lines.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When we see a goto we enter unary context. For example:
goto *h;
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When looking for an associated comment they may be suffixed by a macro
continuation. Ignore this.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We are false matching __asm__ as a type, and then tripping the external
function checks. Squash.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some types such as typedefs may overlap real identifiers. Be more
targetted about when a type can really exist. Where it cannot let it be
an identifier. This prevents false reporting of the minus '-' in unary
context in the following:
foo[bar->bool - 1];
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Casts require parentheses so it is possible to have something like this:
return (int)(*a);
This miss trips the complexity function. Ensure that the two separate
parenthesised sections are not coelesced.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Trying to compile the v850 port brings many compile errors, one of them exists
since at least kernel 2.6.19.
There also seems to be noone willing to bring this port back into a usable
state.
This patch therefore removes the v850 port.
If anyone ever decides to revive the v850 port the code will still be
available from older kernels, and it wouldn't be impossible for the port to
reenter the kernel if it would become actively maintained again.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (79 commits)
arm: bus_id -> dev_name() and dev_set_name() conversions
sparc64: fix up bus_id changes in sparc core code
3c59x: handle pci_name() being const
MTD: handle pci_name() being const
HP iLO driver
sysdev: Convert the x86 mce tolerant sysdev attribute to generic attribute
sysdev: Add utility functions for simple int/ulong variable sysdev attributes
sysdev: Pass the attribute to the low level sysdev show/store function
driver core: Suppress sysfs warnings for device_rename().
kobject: Transmit return value of call_usermodehelper() to caller
sysfs-rules.txt: reword API stability statement
debugfs: Implement debugfs_remove_recursive()
HOWTO: change email addresses of James in HOWTO
always enable FW_LOADER unless EMBEDDED=y
uio-howto.tmpl: use unique output names
uio-howto.tmpl: use standard copyright/legal markings
sysfs: don't call notify_change
sysdev: fix debugging statements in registration code.
kobject: should use kobject_put() in kset-example
kobject: reorder kobject to save space on 64 bit builds
...
When a kernel was rebuilt, the previous Module.markers was not cleared.
It caused markers with different format strings to appear as duplicates
when a markers was changed. This problem is present since
scripts/mod/modpost.c started to generate Module.markers, commit
b2e3e658b3
It therefore applies to 2.6.25, 2.6.26 and linux-next.
I merely merged the patches from Roland, Wenji and Takashi here.
Credits to
Roland McGrath <roland@redhat.com>
Wenji Huang <wenji.huang@oracle.com>
and
Takashi Nishiie <t-nishiie@np.css.fujitsu.com>
for providing the individual fixes.
- Changelog :
- Integrated Takashi's Makefile modification to clear Module.markers upon
make clean.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Roland McGrath <roland@redhat.com>
Cc: Wenji Huang <wenji.huang@oracle.com>
Cc: Takashi Nishiie <t-nishiie@np.css.fujitsu.com>
Cc: <stable@kernel.org> [2.6.25.x, 2.6.26.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Along with the non-modalias conformant "pnp:*" aliases, we add "acpi:*"
entries to PNP drivers, to allow module autoloading by ACPI PNP device
entries, which export proper modalias information, without any specific
userspace modprobe mangling.
Cc: Adam Belay <ambx1@neo.rr.com>
Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Also fix unwanted rebuilds of the firmware/ihex2fw tool by including
the .ihex2fw.cmd file when present.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Reported-and-tested-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for-2.6.27' of git://git.infradead.org/users/dwmw2/firmware-2.6: (64 commits)
firmware: convert sb16_csp driver to use firmware loader exclusively
dsp56k: use request_firmware
edgeport-ti: use request_firmware()
edgeport: use request_firmware()
vicam: use request_firmware()
dabusb: use request_firmware()
cpia2: use request_firmware()
ip2: use request_firmware()
firmware: convert Ambassador ATM driver to request_firmware()
whiteheat: use request_firmware()
ti_usb_3410_5052: use request_firmware()
emi62: use request_firmware()
emi26: use request_firmware()
keyspan_pda: use request_firmware()
keyspan: use request_firmware()
ttusb-budget: use request_firmware()
kaweth: use request_firmware()
smctr: use request_firmware()
firmware: convert ymfpci driver to use firmware loader exclusively
firmware: convert maestro3 driver to use firmware loader exclusively
...
Fix up trivial conflicts with BKL removal in drivers/char/dsp56k.c and
drivers/char/ip2/ip2main.c manually.
* 'tracing/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (228 commits)
ftrace: build fix for ftraced_suspend
ftrace: separate out the function enabled variable
ftrace: add ftrace_kill_atomic
ftrace: use current CPU for function startup
ftrace: start wakeup tracing after setting function tracer
ftrace: check proper config for preempt type
ftrace: trace schedule
ftrace: define function trace nop
ftrace: move sched_switch enable after markers
ftrace: prevent ftrace modifications while being kprobe'd, v2
fix "ftrace: store mcount address in rec->ip"
mmiotrace broken in linux-next (8-bit writes only)
ftrace: avoid modifying kprobe'd records
ftrace: freeze kprobe'd records
kprobes: enable clean usage of get_kprobe
ftrace: store mcount address in rec->ip
ftrace: build fix with gcc 4.3
namespacecheck: fixes
ftrace: fix "notrace" filtering priority
ftrace: fix printout
...
Add modalias and subchannel type attributes for all subchannels.
I/O subchannel specific attributes are now created in
io_subchannel_probe(). modalias and subchannel type are also
added to the uevent for the css bus. Also make the css modalias
known.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Not the straight conversion to binary which objcopy can do for us, but
actually representing each record with its original {addr, length},
because some drivers need that information preserved.
Fix up 'firmware_install' to be able to build $(hostprogs-y) too.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
For 'make modules_install', install any firmware required by
the modules which are being installed.
Also add a 'make firmware_install' target which doesn't depend on the
configuration, but installs _all_ available in-kernel-tree firmware into
$(INSTALL_FW_PATH), which defaults to /lib/firmware. This is intended
for distributors to make arch-independent (and config-independent)
packages containing firmware.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Kumar Gala <galak@kernel.crashing.org> wrote:
We have a case in powerpc in which we want to link some library
routines with all module objects. The routines are intended for
handling out-of-line function call register save/restore so having
them as EXPORT_SYMBOL() is counter productive (we do also need to
link the same "library" code into the kernel).
Without this patch a powerpc build would error out and fail
to build modules with the added register save/restore module.
There were two obvious solutions:
1) To link the .o file before the modpost stage
2) To ignore the symbols in modpost
Option 1) was ruled out because we do not have any separate
linking stage for single file modules.
This patch implements option 2 - and do so only for powerpc.
The symbols we ignore are all undefined symbols named:
_restgpr_*, _savegpr_*, _rest32gpr_*, _save32gpr_*
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
This version is a bit of a whopper. This version brings a few new checks,
improvements to a number of checks mostly through modifications to the
way types are parsed, several fixes to quote/comment handling, as well as
the usual slew of fixes for false positives.
Of note:
- return is not a function and is now reported,
- preprocessor directive detection is loosened to match C99 standard,
- we now intuit new type modifiers, and
- comment handling is much improved
Andy Whitcroft (18):
Version: 0.19
fix up a couple of missing newlines in reports
colon to parenthesis spacing varies on asm
values: #include is a preprocessor statement
quotes: fix single character quotes at line end
add typedef exception for the non-pointer "function types"
kerneldoc parameters must be on one line, relax line length
types: word boundary is not always required
improved #define bracketing reports
uninitialized_var is an annotation not a function name
possible types: add possible modifier handling
possible types: fastcall is a type modifier
types: unsigned is not a modifier on all types
static/external initialisation to zero should allow modifiers
checkpatch: fix recognition of preprocessor directives -- part 2
comments: fix inter-hunk comment tracking
return is not a function
do not report include/asm/foo.h use in include/linux/foo.h
return is not a function -- tighten test
[jengelh@computergmbh.de: fix recognition of preprocessor directives]
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Cc: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When we introduced support for KBUILD_EXTRA_SYMBOLS
we started to include the externam module's kbuild
file when doing the final modpost step.
As external modules often do:
ccflags-y := -I$(src)
We had problems because $(src) was unassinged and
gcc then used the next parameter for -I resulting in
strange build failures.
Fix is to assign $(src) and $(obj) when building
external modules.
This fixes: http://bugzilla.kernel.org/show_bug.cgi?id=10798
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Tvrtko <tvrtko.ursulin@sophos.com>
Cc: Andrea Arcangeli <andrea@qumranet.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
These magic greps and hacks in ver_linux to get the gcc version always break after some gcc releases.
Since now gcc >4.3 allows compiling with '--with-pkgversion' ( which can be everything 'My Cool Gcc' or something )
ver_linux will report random junk for these.
Simply use 'gcc -dumpversion' to get the gcc version which should always work.
Signed-off-by: Gabriel C <nix.or.die@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
We currently have a way to add special CFLAGS to code, but we do not have a
way to remove them if needed.
With the case of ftrace, some files should simply not be profiled. Adding
the -pg flag to these files is simply a waste, and adding "notrace" to each
and every function is ugly.
Currently we put in "Makefile turd" [1] to stop the compiler from adding -pg
to certain files. This was clumsy and awkward.
This patch now adds the revese of CFLAGS_(basename).o with
CFLAGS_REMOVE_(basename).o. This allows developers to prevent certain
CFLAGS from being used to compile files. For example, we can now do
CFLAGS_REMOVE_string.o = -pg
to remove the -pg option from the string.o file in the lib directory.
Note: a space delimited list of options may be added to the REMOVE macro.
[1] - what David Miller called the workaronud to remove -pg
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
1) The field 'len' of the 'gstr' structure seems to track the size of the memory
already allocated for the "growable string". So the value of this field should be
the same as the 'malloc()' just above, shouldn't it ?
Signed-off-by: Christophe Jaillet <christophe.jaillet@wanadoo.fr>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Allow for unnamed bit-fields and skip them instead of printing an
erroneous warning message for them, such as:
Warning(include/asm-s390/cio.h:103): No description found for parameter 'u32'
which contains:
struct tm_scsw {
u32 :1;
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Andi Kleen <andi@firstfloor.org>
reported that he saw a lot of symbols like this:
0000000000000b24 N DW.aio.h.903a6d92.2
0000000000000bce N DW.task_io_accounting.h.8d8de327.0
0000000000000bec N DW.hrtimer.h.c23659c6.0
in his System.map / kallsyms output.
Simple solution is to skip all debugging
symbols (they are marked 'N').
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Paulo Marques <pmarques@grupopie.com>
Disable modpost warnings for linkonce sections
My build gives lots of warnings like
WARNING: sound/core/snd.o (.gnu.linkonce.wi.mpspec_def.h.30779716): unexpected section name.
The (.[number]+) following section name are ld generated and not expected.
Did you forget to use "ax"/"aw" in a .S file?
Note that for example <linux/init.h> contains
section definitions for use in .S files.
But for .linkonce. duplicated sections are actually ok and expected.
So just disable the warning for this case.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Not all device types need a wildcard at the end of their module
aliases. In particular, for i2c module aliases, the trailing wildcard
is not only unneeded, it could also cause the wrong driver to be
loaded.
As I2C devices have no IDs, i2c module aliases are simple, arbitrary
device names. For example:
$ /sbin/modinfo lm90
filename: /lib/modules/2.6.25-git18/kernel/drivers/hwmon/lm90.ko
author: Jean Delvare <khali@linux-fr.org>
description: LM90/ADM1032 driver
license: GPL
vermagic: 2.6.25-git18 mod_unload
depends: hwmon
alias: i2c:lm90*
alias: i2c:adm1032*
alias: i2c:lm99*
alias: i2c:lm86*
alias: i2c:max6657*
alias: i2c:adt7461*
alias: i2c:max6680*
$
This would cause trouble if one I2C chip name matches the beginning of
another I2C chip name and both chips are supported by different
drivers. For example, an i2c device named lm9042 would cause the lm90
driver to be loaded, while it doesn't support that device. This case
has yet to be seen in practice, but still, I'd like to fix it now. The
cleanest fix is to remove the trailing wildcard from i2c module aliases.
Here's a patch doing this.
Not all device type aliases need a trailing wildcard, in particular
the i2c aliases don't. Don't add a wildcard by default in do_table(),
instead let each device type handler add it if needed.
I have tested types acpi, dmi, eisa, i2c, ide, ieee1394, input, pci,
pcmcia, platform, pnp, scsi, serio, ssb and usb. Other types (ccw, of,
vio, parisc, sdio and virtio) are untested.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Jochen Friedrich <jochen@scram.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
OS-X shell did not like 'echo -e' so implement
suggestion from Al Viro to use a more portable construct.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Acked-By: Timur Tabi <timur@freescale.com>
Pointed out by Paulo:
"When I wrote this initially, it was a mistake to add a Changelog in
the first place, but I didn't know better at the time.
If you're going to make changes to this file, please remove all the
Changelog, instead of adding more entries to it. The 'Changelog'
should be kept by the version control system, and not the source code
itself."
Cc: Paulo Marques <pmarques@grupopie.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Acked-by: Paulo Marques <pmarques@grupopie.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Based on earlier work by Jon Smirl and Jochen Friedrich.
This patch allows new-style i2c chip drivers to have alias names using
the official kernel aliasing system and MODULE_DEVICE_TABLE(). At this
point, the old i2c driver binding scheme (driver_name/type) is still
supported.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Jochen Friedrich <jochen@scram.de>
Cc: Jon Smirl <jonsmirl@gmail.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
This version brings a few fixes for the extern checks, and a couple of
new checks.
Of note:
- false is now recognised as a 0 assignment in static/external
assignments,
- printf format strings including %L are reported,
- a number of fixes for the extern in .c file detector which had
temporarily lost its ability to detect variables; undetected due to
the loss of its test.
Andy Whitcroft (8):
Version: 0.18
false should trip 0 assignment checks
tests: reinstate missing tests
tests: allow specification of the file extension for a test
fix extern checks for variables
check for and report %Lu, %Ld, and %Li
ensure we only start a statement on lines with some content
extern spacing
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This version brings improvements to external declaration detection, fixes to
quote tracking, fixes to unary tracking, some clarification of wording, and
the usual slew of fixes for false positives.
Of note:
- much better unary tracking across preprocessor directives
- UTF8 checks highlight the character at fault
- widening of mutex detection
Andy Whitcroft (17):
Version: 0.17
values: __attribute__ carries through the previous type
quotes: should only follow "positive" lines
clarify the indent tabs over spaces wording
loosen NR_CPUS check for array range initialisers
detect external function declarations without an extern prefix
function declaration arguments should be with the identifier
DEFINE_MUTEX should report in line with struct mutex
NR_CPUS is valid in preprocessor statements
comment detection should not start on the @@ line
types: add support for #undef
tighten mutex/completion reports to usage
allow export of function pointers
values: preprocessor #define is out of line maintain values
values: #define does not always have parentheses
unary '*' may be const
utf8 checks should report location of the invalid character
Wolfram Sang (1):
make checkpatch.pl really skip <asm/irq.h>
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The new version of indent supports positioning labels in column 1
using "-il0"
http://www.nabble.com/Release-2.2.10-of-GNU-Indent-td15990700.html
Add "-il0" if indent version >= 2.2.10
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As choice dependency are now fully checked, it's quite easy to add support
for named choices. This lifts the restriction that a choice value can only
appear once, although it still has to be within the same group,
but multiple choices can be joined by giving them a name.
While at it I cleaned up a little the choice type logic to simplify it a
bit.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Properly check the dependency of choices as a group.
Also fix that sym_check_deps() correctly terminates the dependency loop
error check (otherwise it would continue printing the dependency chain).
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
On a Mac OS X machine the output of ls -l is different from a standard
Linux machine. Use readlink instead of parsing a hardcoded field number
from the ls output.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Fix reversal of dlg.border.atr and dlg.dialog.atr for draw_box()
Makes the inputbox look like expected
Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Print a warning when a kernel-doc comment block ends with text on the same
line as the ending comment characters, e.g.:
* this text is lost. */
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I saw this problem recently. With this kernel-doc:
* Note: some important info
*
* Note: other important info
kernel-doc uses the "section name" (preceding the ':', like "Note") as a hash
key for storing the descriptive text ("blah important info"). It is (was)
possible to have duplicate (colliding) section names, without any kind of
warning or error.
kernel-doc happily used the latter descriptive text for all instances of
printing the <section-name> descriptive text and the former important info
was lost.
One way to "fix" this is to modify the kernel-doc comments, e.g.:
* Note1: foo bar
*
* Note.2: blah zay
For now, kernel-doc will signal an error when it sees colliding section names
like this.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Only modules that has other MODULE_* content
shall have the MODULE_LICENSE() tag.
This fixes allmodconfig build on my box.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (120 commits)
usb: don't update devnum for wusb devices
wusb: make ep0_reinit available for modules
wusb: devices dont use a set address
wusb: teach choose_address() about wireless devices
wusb: add link wusb-usb device
wusb: add authenticathed bit to usb_dev
USB: remove unnecessary type casting of urb->context
usb serial: more fixes and groundwork for tty changes
USB: replace remaining __FUNCTION__ occurrences
USB: usbfs: export the URB_NO_INTERRUPT flag to userspace
USB: fix compile problems in ehci-hcd
USB: ehci: qh_completions cleanup and bugfix
USB: cdc-acm: signedness fix
USB: add documentation about callbacks
USB: don't explicitly reenable root-hub status interrupts
USB: OHCI: turn off RD when remote wakeup is disabled
USB: HCDs use the do_remote_wakeup flag
USB: g_file_storage: ignore bulk-out data after invalid CBW
USB: serial: remove endpoints setting checks from core and header
USB: serial: remove unneeded number endpoints settings
...
Massimo Maiurana reported:
In the latest kernel "make update-po-config" fails because it tries
to open arch/Kconfig/Kconfig, since the ls command doesn't
distinguish between files and directories.
Cc: Massimo Maiurana <maiurana@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
This patch adds a new (Kbuild) Makefile variable KBUILD_EXTRA_SYMBOLS.
The space separated list of file names assigned to KBUILD_EXTRA_SYMBOLS
is used when calling scripts/mod/modpost during stage 2 of the Kbuild
process for non-kernel-tree modules.
Signed-off-by: Richard Hacker <lerichi@gmx.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
This patch adds a new command line option -E to modpost, expecting a symbol
file as an argument which is read prior to symbol processing. -E can be
supplied multiple times for as many files as is needed.
When building kernel modules that depend on other modules not in the main
kernel tree, modpost complains about undefined symbols:
# make -C /path/to/linux/kernel M=/path/to/my/module
...
Building modules, stage 2.
....
WARNING: "rt_copy_buf" [/home/rich/osc_etl_rtw/osc_kmod.ko] undefined!
...etc
This situation occurs when modpost processes the new module's symbols. When
it finds symbols not exported by the mainline kernel, it issues this warning.
The patch adds a new command line option -e to modpost which expects a symbol
file as an argument. The symbols listed in this file are added to modpost's
symbol tables during startup. -e can be supplied as often as required.
This patch works together with the second patch. It introduces a new make
variable, KBUILD_EXTRA_SYMBOLS, which is used when calling modpost.
Signed-off-by: Richard Hacker <lerichi@gmx.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Adrian Bunk suggested a build time check for
missing MODULE_LICENSE annotation in modules.
The build time check is fatal as we really
want this fixed for all modules.
In-tree modules should all have been fixed up by now.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Adrian Bunk <bunk@kernel.org>
The current PNP combined card + devices module aliase can
never ever match anything, because these values are not available
all at the same time to request a module.
Instead of adding the combined alias, we add the device id's
all as individual aliases. Device id's are exported by the PNP
bus and can now properly used to request the loading of a
matching module.
The module snd-sbawe currently exports aliases, which can never
match anything:
alias: pnp:cCTLXXXXdCTL0045dCTL0022*
alias: pnp:cCTLXXXXdCTL0044dCTL0023*
alias: pnp:cCTLXXXXdCTL0042dCTL0022*
alias: pnp:cCTLXXXXdCTL0041dCTL0021*
alias: pnp:cCTLXXXXdCTL0031dCTL0021*
alias: pnp:cCTL00eddCTL0041dCTL0070*
alias: pnp:cCTL00e9dCTL0045dCTL0022*
alias: pnp:cCTL00e4dCTL0045dCTL0022*
alias: pnp:cCTL00c7dCTL0045dCTL0022*
alias: pnp:cCTL00c5dCTL0045dCTL0022*
alias: pnp:cCTL00c3dCTL0045dCTL0022*
alias: pnp:cCTL00c1dCTL0042dCTL0022*
alias: pnp:cCTL00b2dCTL0044dCTL0023*
alias: pnp:cCTL009edCTL0044dCTL0023*
alias: pnp:cCTL009ddCTL0042dCTL0022*
alias: pnp:cCTL009fdCTL0041dCTL0021*
alias: pnp:cCTL009cdCTL0041dCTL0021*
alias: pnp:cCTL009adCTL0041dCTL0021*
alias: pnp:cCTL0054dCTL0031dCTL0021*
alias: pnp:cCTL0048dCTL0031dCTL0021*
alias: pnp:cCTL0047dCTL0031dCTL0021*
alias: pnp:cCTL0046dCTL0031dCTL0021*
alias: pnp:cCTL0045dCTL0031dCTL0021*
alias: pnp:cCTL0044dCTL0031dCTL0021*
alias: pnp:cCTL0043dCTL0031dCTL0021*
alias: pnp:cCTL0042dCTL0031dCTL0021*
alias: pnp:cCTL0039dCTL0031dCTL0021*
alias: pnp:cCTL0035dCTL0031dCTL0021*
With this patch it exports only the device id's, as properly
matchable aliases:
alias: pnp:dCTL0070*
alias: pnp:dCTL0045*
alias: pnp:dCTL0023*
alias: pnp:dCTL0044*
alias: pnp:dCTL0022*
alias: pnp:dCTL0042*
alias: pnp:dCTL0041*
alias: pnp:dCTL0021*
alias: pnp:dCTL0031*
Now, the exported value of the PNP bus can be used to autoload
a matching module:
$ modprobe --first-time -n -v pnp:dCTL0045
insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/core/snd-rawmidi.ko
insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/drivers/mpu401/snd-mpu401-uart.ko
insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/core/snd-hwdep.ko
insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/isa/sb/snd-sb-common.ko
insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/isa/sb/snd-sb16-csp.ko
insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/isa/sb/snd-sb16-dsp.ko
insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/drivers/opl3/snd-opl3-lib.ko
insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/isa/sb/snd-sbawe.ko
$ grep CTL0045 /sys/bus/pnp/devices/*/id
/sys/bus/pnp/devices/01:01.00/id:CTL0045
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This version brings proper quote tracking across lines, and brings the
handling of comments into the same mechanism ensuring nesting is correctly
handled. It brings the usual flurry of fixes for false positives. It also
brings a number of new checks. The most contentious change will likely be
the checks for NR_CPUS as this throws some new warnings in kernel/sched.c.
Of note:
- all new quote tracking across lines
- all new comment tracking
- new more direct, less ambigious wording for some warnings
- recommends mutexes and completions over semaphores
- recommends strict_strto* over simple_strto*
- report on direct use of NR_CPUS
Andy Whitcroft (22):
Version: 0.16
string quote tracking should cross line boundaries
check spacing round -> correctly across newlines
checks for linux/ against asm/ include files should be warnings
standardise on 'required' and 'prohibited'
take the first end of condition when parsing statements
values: cope with unbalanced brackets
preprocessor #elif is not a function
preprocessor #if should not trigger trailing statement checks
test: allow us to limit output to a single error
recommend real mutexes over semaphores
asm checks should mirror those for __asm__
warn on semaphores being used in place of completions
trailing ; on control structure should ignore do {} while ();
recommend strict_strtoX over simple_strtoX
redo comment handling as a quote type
use of NR_CPUS is normally wrong
consistant spacing should only be about spaces
if brace check suppression should only apply to the top-levels
use tr/// to align spacing for operators
move to using four parameter form of substr
check and report modifications to include/asm
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The module alias support in the kernel have a consistency
check where it is checked that the size of a structure
in the kernel and on the build host are the same.
For cross builds this check does not make sense so detect
when we do cross builds and silently skip the check in these
situations.
This fixes a build bug for a wireless driver when cross building
for arm.
Acked-by: Michael Buesch <mb@bu3sch.de>
Tested-by: Gordon Farquharson <gordonfarquharson@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: stable@kernel.org
Eric Miao
Ingo Molnar
Sam Ravnborg
Lai Jiangshan
Josh Hunt
Justin P. Mattock
Andy Whitcroft
Alain Knaff
Linus Torvalds
Jiri Slaby
Arjan van de Ven
Rabin Vincent
Alexey Dobriyan
Michael Neuling
Mike Frysinger
Randy Dunlap
Tejun Heo
Kay Sievers
Steven Rostedt
Andi Kleen
Shaohua Li
Jike Song
Mike Frysinger
Wolfram Sang
Andy Whitcroft
Arjan van de Ven
H. Peter Anvin
Jan Beulich
Vegard Nossum
Frederic Weisbecker
Robert P. J. Day
Peter Korsgaard
Jeremy Kerr
Andreas Gruenbacher
Werner Almesberger
Liming Wang
Jim Radford
Matt Fleming
Stephen Hemminger
Jonathan McDowell
Matt Fleming
Steven Rostedt
Jeremy Huntwork
Trent Piepho
Ashutosh Naik
Peter Volkov
Thomas Volpini
Evgeniy Manachkin
Al Viro
Martin Habets
Alan Jenkins
Dave Jones
Jason Baron
Arnaud Patard
Andrew Morton
Jeremy Fitzhardinge
David Woodhouse
David Woodhouse
Greg Kroah-Hartman
Christian Borntraeger
James Morris
Mathieu Desnoyers
zippel@linux-m68k.org
Serge E. Hallyn
Erkki Lintunen
Adrian Bunk
Ben Dooks
Sebastian Siewior
Tim Bird
Eric Sandeen
Michael Ellerman
Mathieu Desnoyers
Cornelia Huck
Gabriel C
Christophe Jaillet
Jean Delvare
Sam Ravnborg
Bryan Wu
Joe Perches
Felix Fietkau
Roel Kluin
Richard Hacker