This patch chanegs the logic of the -b, --branch-stack options
of perf record.
Based on users' request, the patch provides a default filter
mode with the -b (or --branch-any) option. With the option,
any type of taken branches is sampled.
With -j (or --branch-filter), the user can specify any
valid combination of branch types and privilege levels
if supported by the underlying hardware.
The -b (--branch any) is a shortcut for: --branch-filter any.
$ perf record -b foo
or:
$ perf record --branch-filter any foo
For more specific filtering:
$ perf record --branch-filter ind_call,u foo
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: peterz@infradead.org
Cc: acme@redhat.com
Cc: asharma@fb.com
Cc: ravitillo@lbl.gov
Cc: vweaver1@eecs.utk.edu
Cc: khandual@linux.vnet.ibm.com
Cc: dsahern@gmail.com
Link: http://lkml.kernel.org/r/1331246868-19905-2-git-send-email-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch allows perf to process perf.data files generated
using an ABI that has a different perf_event_attr struct size,
i.e., a different ABI version.
The perf_event_attr can be extended, yet perf needs to cope with
older perf.data files. Similarly, perf must be able to cope with
a perf.data file which is using a newer version of the ABI than
what it knows about.
This patch adds read_attr(), a routine that reads a
perf_event_attr struct from a file incrementally based on its
advertised size. If the on-file struct is smaller than what perf
knows, then the extra fields are zeroed. If the on-file struct
is bigger, then perf only uses what it knows about, the rest is
skipped.
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: peterz@infradead.org
Cc: acme@redhat.com
Cc: robert.richter@amd.com
Cc: ming.m.lin@intel.com
Cc: andi@firstfloor.org
Cc: asharma@fb.com
Cc: ravitillo@lbl.gov
Cc: vweaver1@eecs.utk.edu
Cc: khandual@linux.vnet.ibm.com
Cc: dsahern@gmail.com
Link: http://lkml.kernel.org/r/1328826068-11713-17-git-send-email-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch adds support for taken branch sampling, i.e, the
PERF_SAMPLE_BRANCH_STACK feature to perf report. In other
words, to display histograms based on taken branches rather
than executed instructions addresses.
The new option is called -b and it takes no argument. To
generate meaningful output, the perf.data must have been
obtained using perf record -b xxx ... where xxx is a branch
filter option.
The output shows symbols, modules, sorted by 'who branches
where' the most often. The percentages reported in the first
column refer to the total number of branches captured and
not the usual number of samples.
Here is a quick example.
Here branchy is simple test program which looks as follows:
void f2(void)
{}
void f3(void)
{}
void f1(unsigned long n)
{
if (n & 1UL)
f2();
else
f3();
}
int main(void)
{
unsigned long i;
for (i=0; i < N; i++)
f1(i);
return 0;
}
Here is the output captured on Nehalem, if we are
only interested in user level function calls.
$ perf record -b any_call,u -e cycles:u branchy
$ perf report -b --sort=symbol
52.34% [.] main [.] f1
24.04% [.] f1 [.] f3
23.60% [.] f1 [.] f2
0.01% [k] _IO_new_file_xsputn [k] _IO_file_overflow
0.01% [k] _IO_vfprintf_internal [k] _IO_new_file_xsputn
0.01% [k] _IO_vfprintf_internal [k] strchrnul
0.01% [k] __printf [k] _IO_vfprintf_internal
0.01% [k] main [k] __printf
About half (52%) of the call branches captured are from main()
-> f1(). The second half (24%+23%) is split in two equal shares
between f1() -> f2(), f1() ->f3(). The output is as expected
given the code.
It should be noted, that using -b in perf record does not
eliminate information in the perf.data file. Consequently, a
typical profile can also be obtained by perf report by simply
not using its -b option.
It is possible to sort on branch related columns:
- dso_from, symbol_from
- dso_to, symbol_to
- mispredict
Signed-off-by: Roberto Agostino Vitillo <ravitillo@lbl.gov>
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: peterz@infradead.org
Cc: acme@redhat.com
Cc: robert.richter@amd.com
Cc: ming.m.lin@intel.com
Cc: andi@firstfloor.org
Cc: asharma@fb.com
Cc: vweaver1@eecs.utk.edu
Cc: khandual@linux.vnet.ibm.com
Cc: dsahern@gmail.com
Link: http://lkml.kernel.org/r/1328826068-11713-14-git-send-email-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch adds a new option to enable taken branch stack
sampling, i.e., leverage the PERF_SAMPLE_BRANCH_STACK feature
of perf_events.
There is a new option to active this mode: -b.
It is possible to pass a set of filters to select the type of
branches to sample.
The following filters are available:
- any : any type of branches
- any_call : any function call or system call
- any_ret : any function return or system call return
- any_ind : any indirect branch
- u: only when the branch target is at the user level
- k: only when the branch target is in the kernel
- hv: only when the branch target is in the hypervisor
Filters can be combined by passing a comma separated list
to the option:
$ perf record -b any_call,u -e cycles:u branchy
Signed-off-by: Roberto Agostino Vitillo <ravitillo@lbl.gov>
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: peterz@infradead.org
Cc: acme@redhat.com
Cc: robert.richter@amd.com
Cc: ming.m.lin@intel.com
Cc: andi@firstfloor.org
Cc: asharma@fb.com
Cc: vweaver1@eecs.utk.edu
Cc: khandual@linux.vnet.ibm.com
Cc: dsahern@gmail.com
Link: http://lkml.kernel.org/r/1328826068-11713-13-git-send-email-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
On tui annotation, the title was set to name of the target symbol if
user selects the target. However it remained after returning to original
symbol from the target. Fix it.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1329986784-4916-4-git-send-email-namhyung.kim@lge.com
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Accepting upper case character only is unconvenient since it requires
SHIFT key too. Why not change to it accept a simple key stroke?
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1329986784-4916-3-git-send-email-namhyung.kim@lge.com
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Print unselected asm code lines as blue. This is what we do now for
--stdio.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1329986784-4916-2-git-send-email-namhyung.kim@lge.com
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are some variable arguments can be specified on make invocation,
but some of them are missing descriptions so that user cannot be
informed easily. Fix it.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1329980894-4289-1-git-send-email-namhyung.kim@lge.com
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If perf_evsel__open() failed, the errno was set and returned properly.
However since the perf_evlist__open() called close() on fd's for all of
evsel x cpu x thread after the failure, the errno was overridden by
other code (EBADF). So the caller of the function ended up seeing
different error message and getting confused.
Fit it by restoring original return value. Because one of caller of the
function is in the python extension, and it uses system errno
internally, it'd be better restoring the original value rather than
using the return value of the function directly, IMHO (i.e. I'm not a
python expert :)
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1329966816-23175-1-git-send-email-namhyung.kim@lge.com
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Just fall back to resetting those fields, if set, warning the user that
that feature is not available.
If guest samples appear they will just be discarded because no struct
machine will be found and thus the event will be accounted as not
handled and dropped, see 0c09571.
Reported-by: Namhyung Kim <namhyung@gmail.com>
Tested-by: Joerg Roedel <joerg.roedel@amd.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Joerg Roedel <joerg.roedel@amd.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-vuwxig36mzprl5n7nzvnxxsh@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Setting perf_guest to true by default makes no sense because the perf
subcommands can not setup guest symbol information and thus not process
and guest samples. The only exception is perf-kvm which changes the
perf_guest value on its own. So change the default for perf_guest back
to false.
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1328893505-4115-3-git-send-email-joerg.roedel@amd.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A recent refactoring of perf-record introduced the following:
perf record -a -B
Couldn't generating buildids. Use --no-buildid to profile anyway.
sleep: Terminated
I believe the triple negative was meant to be only a double negative.
:-) While I'm there, fixed the grammar on the error message.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1328567272-13190-1-git-send-email-dsahern@gmail.com
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'perf probe' command allows kprobe to be inserted at any offset from
a function start, which results in adding kprobes to unintended
location. (example: perf probe do_fork+10000 is allowed even though
size of do_fork is ~904).
My previous patch https://lkml.org/lkml/2012/2/24/42 addressed the case
where DWARF info was available for the kernel. This patch fixes the
case where perf probe is used on a kernel without debuginfo available.
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/4F4C544D.1010909@linux.vnet.ibm.com
Signed-off-by: Prashanth Nageshappa <prashanth@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If threads in a multi-threaded process have names shorter than the main
thread the comm for the named threads is not properly terminated.
E.g., for the process 'namedthreads' where each thread is named noploop%d
where %d is the thread number:
Before:
perf script -f comm,tid,ip,sym,dso
noploop:4ads 21616 400a49 noploop (/tmp/namedthreads)
The 'ads' in the thread comm bleeds over from the process name.
After:
perf script -f comm,tid,ip,sym,dso
noploop:4 21616 400a49 noploop (/tmp/namedthreads)
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1330111898-68071-1-git-send-email-dsahern@gmail.com
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf probe command allows kprobe to be inserted at any offset from a
function start, which results in adding kprobes to unintended location.
Example: perf probe do_fork+10000 is allowed even though size of do_fork
is ~904.
This patch will ensure probe addition fails when the offset specified is
greater than size of the function.
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Link: http://lkml.kernel.org/r/4F473F33.4060409@linux.vnet.ibm.com
Signed-off-by: Prashanth Nageshappa <prashanth@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On old kernels that don't support sample_id_all feature,
perf_evlist__id2evsel() returns NULL for non-sampling events.
This breaks perf top when multiple events are given on command line. Fix
it by using first evsel in the evlist. This will also prevent getting
the same (potential) problem in such new tool/ old kernel combo.
Suggested-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1329702447-25045-1-git-send-email-namhyung.kim@lge.com
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The following commit:
b52956c perf tools: Allow multiple threads or processes in record, stat, top
introduced a bug in the thread_map code which caused perf record -a to
not setup system-wide monitoring properly.
$ taskset -c 1 noploop 1000 &
$ perf record -a -C 1 sleep 10
$ perf report -D | tail -20
cycles stats:
TOTAL events: 4413
MMAP events: 4025
COMM events: 340
SAMPLE events: 48
Here I was expecting about 10,000 samples and not 48.
In system-wide mode, the PID passed to perf_event_open() must be -1 and
it was 0. That caused the kernel to setup a per-process event on PID:0.
Consequently, the number of samples captured does not correspond to the
requested measurement.
The following one-liner fixes the problem for me with or without -C.
I would also suggest to change the malloc() to something that matches
the struct definition. thread_map->map[] is declared as int map[] and
not pid_t map[]. If map[] can only contain pids, then change the struct
definition.
Acked-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120221145424.GA6757@quad
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The __print_symbolic() function takes a sequence of key-value pairs for
pretty-printing a constant. The new kvm:kvm_exit print fmt uses the
expression:
__print_symbolic(..., { 0x040 + 1, "DB excp" }, ...)
Currently only atoms are supported and this print fmt fails to parse.
This patch adds support for expressions instead of just atoms so that
0x040 + 1 is parsed successfully. Also add arg_num_eval() support for
the '+' operator.
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1315148939-14313-1-git-send-email-stefanha@linux.vnet.ibm.com
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead of requiring that users of perf_record_opts set
.sample_id_all_avail to true, just invert the logic, using
.sample_id_all_missing, that doesn't need to be explicitely initialized
since gcc will zero members ommitted in a struct initialization.
Just like the newly introduced .exclude_{guest,host} feature test.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ab772uzk78cwybihf0vt7kxw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Just fall back to resetting those fields, if set, warning the user that
that feature is not available.
If guest samples appear they will just be discarded because no struct
machine will be found and thus the event will be accounted as not
handled and dropped, see 0c09571.
Reported-by: Namhyung Kim <namhyung@gmail.com>
Tested-by: Joerg Roedel <joerg.roedel@amd.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Joerg Roedel <joerg.roedel@amd.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-vuwxig36mzprl5n7nzvnxxsh@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf_event_attr size needs to be initialized in all cases because it
captures the ABI version.
This patch moves the initialization of the field from the
perf_event_open() syscall stub to its proper location in the
event_attr_init().
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120209151238.GA10272@quad
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There is individual code for each feature to process header sections.
Adding a function pointer .process to struct feature_ops for keeping the
implementation in separate functions. Code to process header sections is
now a generic function.
Cc: Ingo Molnar <mingo@elte.hu>
Link: http://lkml.kernel.org/r/1328884916-5901-2-git-send-email-robert.richter@amd.com
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding implementation os bitmap_or function to the bitmap object. It is
stolen from the kernel lib/bitmap.o object.
It is used in upcomming patches.
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1327674868-10486-5-git-send-email-jolsa@redhat.com
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding sysfs object to provide sysfs mount information in the same way
as debugfs object does.
The object provides following function:
sysfs_find_mountpoint
which returns the sysfs mount mount.
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1327674868-10486-4-git-send-email-jolsa@redhat.com
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Following debugfs object functions are not referenced
within the code:
int debugfs_valid_entry(const char *path);
int debugfs_umount(void);
int debugfs_write(const char *entry, const char *value);
int debugfs_read(const char *entry, char *buffer, size_t size);
void debugfs_force_cleanup(void);
int debugfs_make_path(const char *element, char *buffer, int size);
Removing them.
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1327674868-10486-3-git-send-email-jolsa@redhat.com
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The ctype.h in symbol.c was needed because of isupper(). However we now
have it in util.h, it can be changed to use our implementation.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1328836217-9118-3-git-send-email-namhyung.kim@lge.com
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The implementation of sane ctype macros only depends on symbols in
util.h not cache.h.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1328836217-9118-2-git-send-email-namhyung.kim@lge.com
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The util.h header provides various ctype macros but lacks those two.
Add them.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1328836217-9118-1-git-send-email-namhyung.kim@lge.com
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Setting perf_guest to true by default makes no sense because the perf
subcommands can not setup guest symbol information and thus not process
and guest samples. The only exception is perf-kvm which changes the
perf_guest value on its own. So change the default for perf_guest back
to false.
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1328893505-4115-3-git-send-email-joerg.roedel@amd.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf sample processing code relies on a valid machine object. Make
sure that this path is only entered when such a object exists.
A counter for samples where no machine object exits is also introduced
to give the user a message about these samples.
Reported-by: David Ahern <dsahern@gmail.com>
Reported-by: Jason Wang <jasowang@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1328893505-4115-2-git-send-email-joerg.roedel@amd.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Allow a user to collect events for multiple threads or processes
using a comma separated list.
e.g., collect data on a VM and its vhost thread:
perf top -p 21483,21485
perf stat -p 21483,21485 -ddd
perf record -p 21483,21485
or monitoring vcpu threads
perf top -t 21488,21489
perf stat -t 21488,21489 -ddd
perf record -t 21488,21489
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1328718772-16688-1-git-send-email-dsahern@gmail.com
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For latest tip/perf/core tree Compiles are failing on:
GEN common-cmds.h
make: *** No rule to make target `../../arch/x86/lib/memset_64.S', needed by `builtin-annotate.o'. Stop.
Resolve by adding memset.* to the tar file.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1329145057-26302-1-git-send-email-dsahern@gmail.com
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf python extention (perf.so) file lacks its dependencies in the
Makefile so that it cannot be refreshed if one of source files it depends
is changed. Fix it by putting them in a separate file and processing it in
both of Makefile and setup.py.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1329043524-12470-1-git-send-email-namhyung@gmail.com
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A recent refactoring of perf-record introduced the following:
perf record -a -B
Couldn't generating buildids. Use --no-buildid to profile anyway.
sleep: Terminated
I believe the triple negative was meant to be only a double negative.
:-) While I'm there, fixed the grammar on the error message.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1328567272-13190-1-git-send-email-dsahern@gmail.com
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The current version of perf detects whether or not the perf.data file is
written in a different endianness using the attr_size field in the
header of the file. This field represents sizeof(struct perf_event_attr)
as known to perf record. If the sizes do not match, then perf tries the
byte-swapped version. If they match, then the tool assumes a different
endianness.
The issue with the approach is that it assumes the size of
perf_event_attr always has to match between perf record and perf report.
However, the kernel perf_event ABI is extensible. New fields can be
added to struct perf_event_attr. Consequently, it is not possible to use
attr_size to detect endianness.
This patch takes another approach by using the magic number written at
the beginning of the perf.data file to detect endianness. The magic
number is an eight-byte signature. It's primary purpose is to identify
(signature) a perf.data file. But it could also be used to encode the
endianness.
The patch introduces a new value for this signature. The key difference
is that the signature is written differently in the file depending on
the endianness. Thus, by comparing the signature from the file with the
tool's own signature it is possible to detect endianness. The new
signature is "PERFILE2".
Backward compatiblity with existing perf.data file is ensured.
Tested-by: David Ahern <dsahern@gmail.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Roberto Agostino Vitillo <ravitillo@lbl.gov>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Vince Weaver <vweaver1@eecs.utk.edu>
Link: http://lkml.kernel.org/r/1328187288-24395-15-git-send-email-eranian@google.com
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The default 'M/sec' unit is not useful if the result is small enough.
Adjust it dynamically according to the value.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1328514285-26232-1-git-send-email-namhyung.kim@lge.com
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently we can put the object files in a different directory by using
'O=' comand line argument.
However the generated documentation files don't honor this directive,
This patch fixes that. It's been tested for man target but the others
seems currently broken so no tests have been done on them so far.
Link: http://lkml.kernel.org/r/1328541443-18003-1-git-send-email-fbuihuu@gmail.com
Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
By adding following objects:
bench/mem-memset-x86-64-asm.o
bench/mem-memcpy-x86-64-asm.o
the x86_64 perf binary ended up with executable stack.
The reason was that above objects are assembler sourced and are missing the
GNU-stack note section. In such case the linker assumes that the final binary
should not be restricted at all and mark the stack as RWX.
Adding section ".note.GNU-stack" definition to mentioned objects, with all
flags disabled, thus omiting those objects from linker stack flags decision.
Reported-at: https://bugzilla.redhat.com/show_bug.cgi?id=783570
Reported-by: Clark Williams <williams@redhat.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1328100848-5630-1-git-send-email-jolsa@redhat.com
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
[ committer note: Remaining bits after what was already added to perf/urgent ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we can get the perf bench exec stack fixes and then apply the
remaining fix for the files added after what is in perf/urgent.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch fixes an issue where perf report shows nan% for certain
perf.data files. The below is from a report for a do_fork probe:
-nan% sshd [kernel.kallsyms] [k] do_fork
-nan% packagekitd [kernel.kallsyms] [k] do_fork
-nan% dbus-daemon [kernel.kallsyms] [k] do_fork
-nan% bash [kernel.kallsyms] [k] do_fork
A git bisect shows commit f3bda2c as the cause. However, looking back
through the git history, I saw commit 640c03c which seems to have
removed the required initialization for perf_sample->period. The problem
only started showing after commit f3bda2c. The below patch re-introduces
the initialization and it fixes the problem for me.
With the below patch, for the same perf.data:
73.08% bash [kernel.kallsyms] [k] do_fork
8.97% 11-dhclient [kernel.kallsyms] [k] do_fork
6.41% sshd [kernel.kallsyms] [k] do_fork
3.85% 20-chrony [kernel.kallsyms] [k] do_fork
2.56% sendmail [kernel.kallsyms] [k] do_fork
This patch applies over current linux-tip commit 9949284.
Problem introduced in:
$ git describe 640c03c
v2.6.37-rc3-83-g640c03c
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: stable@kernel.org
Link: http://lkml.kernel.org/r/20120203170113.5190.25558.stgit@localhost6.localdomain6
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In some perf ancient versions we used '[kernel.kallsyms._text]' as the
name for the kernel map.
This got changed with commit:
perf: 'perf kvm' tool for monitoring guest performance from host
commit a1645ce12a
Author: Zhang, Yanmin <yanmin_zhang@linux.intel.com>
and we started to use following name '[kernel.kallsyms]_text'.
This name change is important for the report code dealing with ancient
perf data. When processing the kernel map event, we need to recognize
the old naming (dont match the last ']') and initialize the kernel map
correctly.
The subsequent call to maps__set_kallsyms_ref_reloc_sym deals with the
superfluous ']' to get correct symbol name.
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1328461865-6127-1-git-send-email-jolsa@redhat.com
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
By adding following objects:
bench/mem-memcpy-x86-64-asm.o
the x86_64 perf binary ended up with executable stack.
The reason was that above object are assembler sourced and is missing the
GNU-stack note section. In such case the linker assumes that the final binary
should not be restricted at all and mark the stack as RWX.
Adding section ".note.GNU-stack" definition to mentioned object, with all
flags disabled, thus omiting this object from linker stack flags decision.
Problem introduced in:
$ git describe ea7872b
v2.6.37-rc2-19-gea7872b
Reported-at: https://bugzilla.redhat.com/show_bug.cgi?id=783570
Reported-by: Clark Williams <williams@redhat.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: stable@kernel.org
Link: http://lkml.kernel.org/r/1328100848-5630-1-git-send-email-jolsa@redhat.com
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
[ committer note: Backported fix to perf/urgent (3.3-rc2+) ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Loop over all features to enable it instead of explicitly enabling every
single feature. Reducing duplicate code and making it more robust to
later changes e.g. when adding more features.
Cc: Ingo Molnar <mingo@elte.hu>
Link: http://lkml.kernel.org/r/1323966762-8574-3-git-send-email-robert.richter@amd.com
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is a precursor patch that modifies names that refer to
kernel/module to also refer to user space names.
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Anton Arapov <anton@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Linux-mm <linux-mm@kvack.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Roland McGrath <roland@hack.frob.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20120202142040.5967.64156.sendpatchset@srdronam.in.ibm.com
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
distclean as an alias for clean was removed from the perf Makefile by
commit a3d1ee10d1
However, that commit neglected to remove it from the help output of
the perf Makefile, which could result in a user trying the following.
$ cd tools/perf/
$ make help | grep distclean
distclean - alias to clean
$ make distclean
make: *** No rule to make target `distclean'. Stop.
This patch removes it from the Makefile help output.
Link: http://lkml.kernel.org/r/1328134591-19851-1-git-send-email-jkacur@redhat.com
Signed-off-by: John Kacur <jkacur@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Making perf_evlist__splice_list_tail globaly accessible.
It is used in the upcomming paches.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1327674868-10486-2-git-send-email-jolsa@redhat.com
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In recent versions of perf top, pressing the 'e' key to change the
number of displayed samples had no effect.
The number of samples was still dictated by the size of the terminal
(stdio mode). That was quite annoying because typically only the first
dozen samples really matter.
This patch fixes this.
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120130105037.GA5160@quad
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The event_type record has a max length for the event name.
It's called MAX_EVENT_NAME.
The name may be truncated to fit the max length. But the header.size still
reflects the original name length. If that length is > MAX_EVENT_NAME, then the
header.size field is bogus. Fix this by using the length of the name after the
potential truncation.
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120120094912.GA4882@quad
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When building on my Debian/mips system, util/util.c fails to build
because commit 1aed267173 (perf kvm: Do
guest-only counting by default) indirectly includes stdio.h before the
feature selection in util.h is done. This prevents _GNU_SOURCE in
util.h from enabling the declaration of getline(), from now second
inclusion of stdio.h, and the build is broken.
There is another breakage in util/evsel.c caused by include ordering,
but I didn't fully track down the commit that caused it.
The root cause of all this is an inconsistent definition of _GNU_SOURCE,
so I move the definition into the Makefile so that it is passed to all
invocations of the compiler and used uniformly for all system header
files. All other #define and #undef of _GNU_SOURCE are removed as they
cause conflicts with the definition passed to the compiler.
All the features.h definitions (_LARGEFILE64_SOURCE _FILE_OFFSET_BITS=64
and _GNU_SOURCE) are needed by the python glue code too, so they are
moved to BASIC_CFLAGS, and the misleading comments about BASIC_CFLAGS
are removed.
This gives me a clean build on x86_64 (fc12) and mips (Debian).
Cc: David Daney <david.daney@cavium.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Joerg Roedel <joerg.roedel@amd.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1326836461-11952-1-git-send-email-ddaney.cavm@gmail.com
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We want to be woken up for every PERF_RECORD_ event, attr.wakeup_events
is only for PERF_RECORD_SAMPLE, so also use attr.watermark = 1 to fix
that.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-v3lnpwgrr8mllcr3ntduuqvc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are unnecessary #include <ctype.h> out there, and they might cause
a nasty build failure in some environment. As we already have most of
ctype macros in util.h, just get rid of them.
A few of exceptions are util/symbol.c which needs isupper() macro util.h
doesn't provide and perl scripting support code which includes ctype.h
internally.
Suggested-by: Ingo Molnar <mingo@elte.hu>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1327827356-8786-4-git-send-email-namhyung@gmail.com
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The commit 26242d859c ("perf lock: Add "info" subcommand for dumping
misc information") added the subcommand but missed documentation. Add
it. Also update stale 'trace' subcommand to 'script'.
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1327827356-8786-5-git-send-email-namhyung@gmail.com
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In recent versions of perf top, pressing the 'e' key to change the
number of displayed samples had no effect.
The number of samples was still dictated by the size of the terminal
(stdio mode). That was quite annoying because typically only the first
dozen samples really matter.
This patch fixes this.
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120130105037.GA5160@quad
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add the option get the path of [kernel.kallsyms].
Specify '--show-kernel-path' option to use this function.
This patch enables other applications to use this output easily.
Without --show-kernel-path option
ffffffff81467612 irq_return ([kernel.kallsyms])
ffffffff81467612 irq_return ([kernel.kallsyms])
7f24fc02a6b3 _start (/lib64/ld-2.14.so)
[snip]
With --show-kernel-path option
ffffffff81467612 irq_return (/lib/modules/3.2.0+/build/vmlinux)
ffffffff81467612 irq_return (/lib/modules/3.2.0+/build/vmlinux)
7f24fc02a6b3 _start (/lib64/ld-2.14.so)
[snip]
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: yrl.pp-manager.tt@hitachi.com
Link: http://lkml.kernel.org/r/20120130044320.2384.73322.stgit@linux3
Signed-off-by: Akihiro Nagai <akihiro.nagai.hw@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf script command uses various expressions to indicate "unknown".
It is unfriendly for user scripts to parse it. So, this patch unifies
the expressions to "[unknown]".
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: yrl.pp-manager.tt@hitachi.com
Link: http://lkml.kernel.org/r/20120130044257.2384.62905.stgit@linux3
Signed-off-by: Akihiro Nagai <akihiro.nagai.hw@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The event_type record has a max length for the event name.
It's called MAX_EVENT_NAME.
The name may be truncated to fit the max length. But the header.size still
reflects the original name length. If that length is > MAX_EVENT_NAME, then the
header.size field is bogus. Fix this by using the length of the name after the
potential truncation.
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120120094912.GA4882@quad
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo pointed out few perf probe usability related errors during his
review of uprobes.
Since these issues are independent of uprobes, fixing them in a separate
patch.
Suggested-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Link: http://lkml.kernel.org/r/20120120121354.GL15447@linux.vnet.ibm.com
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When building on my Debian/mips system, util/util.c fails to build
because commit 1aed267173 (perf kvm: Do
guest-only counting by default) indirectly includes stdio.h before the
feature selection in util.h is done. This prevents _GNU_SOURCE in
util.h from enabling the declaration of getline(), from now second
inclusion of stdio.h, and the build is broken.
There is another breakage in util/evsel.c caused by include ordering,
but I didn't fully track down the commit that caused it.
The root cause of all this is an inconsistent definition of _GNU_SOURCE,
so I move the definition into the Makefile so that it is passed to all
invocations of the compiler and used uniformly for all system header
files. All other #define and #undef of _GNU_SOURCE are removed as they
cause conflicts with the definition passed to the compiler.
All the features.h definitions (_LARGEFILE64_SOURCE _FILE_OFFSET_BITS=64
and _GNU_SOURCE) are needed by the python glue code too, so they are
moved to BASIC_CFLAGS, and the misleading comments about BASIC_CFLAGS
are removed.
This gives me a clean build on x86_64 (fc12) and mips (Debian).
Cc: David Daney <david.daney@cavium.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Joerg Roedel <joerg.roedel@amd.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1326836461-11952-1-git-send-email-ddaney.cavm@gmail.com
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
"perf stat ... perf bench mem mem..." is pretty meaningless when using
small block sizes (as the overhead of the invocation of each test run
basically hides the actual test result in the noise). Repeating the
actually interesting function's invocation a number of times allows the
results to become meaningful.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/4F16D767020000780006D738@nat28.tlf.novell.com
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Intended to be able to support the current selection of the preferred
memcpy() implementation, this patch adds the ability to also measure the
two alternative implementations, again by way of using some
pre-processsor replacement.
While on my Westmere system this proves that the movsb based variant is
worse than the movsq based one (since the ERMS feature isn't there), it
also shows that here for the default as well as small sizes the unrolled
variant outperforms the movsq one.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/4F16D728020000780006D732@nat28.tlf.novell.com
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since arch/x86/lib/memcpy_64.S implements not only __memcpy, but also
memcpy, without further precautions this function will get chose by the
static linker for resolving all references, and hence the "default"
measurement didn't really measure anything else than the
"x86-64-unrolled" one.
Fix this by renaming (through the pre-processor) the conflicting symbol.
On my Westmere system, the glibc variant turns out to require about 4%
less instructions, but 15% more cycles for the default 1Mb block size
measured.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/4F16D6FD020000780006D72F@nat28.tlf.novell.com
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The new --uid command line option will show only the tasks for a given
user, using the proc interface to figure out the existing tasks.
Kernel work is needed to close races at startup, but this should already
be useful in many use cases.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bdnspm000gw2l984a2t53o8z@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits)
perf tools: Fix compile error on x86_64 Ubuntu
perf report: Fix --stdio output alignment when --showcpuutilization used
perf annotate: Get rid of field_sep check
perf annotate: Fix usage string
perf kmem: Fix a memory leak
perf kmem: Add missing closedir() calls
perf top: Add error message for EMFILE
perf test: Change type of '-v' option to INCR
perf script: Add missing closedir() calls
tracing: Fix compile error when static ftrace is enabled
recordmcount: Fix handling of elf64 big-endian objects.
perf tools: Add const.h to MANIFEST to make perf-tar-src-pkg work again
perf tools: Add support for guest/host-only profiling
perf kvm: Do guest-only counting by default
perf top: Don't update total_period on process_sample
perf hists: Stop using 'self' for struct hist_entry
perf hists: Rename total_session to total_period
x86: Add counter when debug stack is used with interrupts enabled
x86: Allow NMIs to hit breakpoints in i386
x86: Keep current stack in NMI breakpoints
...
The ctype.h include is not needed here and it breaks build on some systems (at
least 64bit Ubuntu 10.04) like below. Just get rid of it.
CC util/trace-event-info.o
cc1: warnings being treated as errors
util/trace-event-info.c: In function ‘record_file’:
util/trace-event-info.c:192: error: implicit declaration of function ‘pwrite’
util/trace-event-info.c:192: error: nested extern declaration of ‘pwrite’
make: *** [util/trace-event-info.o] Error 1
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Joerg Roedel <joerg.roedel@amd.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1326035430-7621-1-git-send-email-namhyung@gmail.com
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'field_sep' variable is not set anywhere. Just remove the
conditional.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1325957132-10600-7-git-send-email-namhyung@gmail.com
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The annotate command doesn't take non-option arguments.
In fact, it can take last argument as a symbol filter though, but that's
a special case and, IMHO, it should be discouraged in favor of the -s
option.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1325957132-10600-6-git-send-email-namhyung@gmail.com
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'str' should be freed when sort_dimension__add() failed too.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1325957132-10600-5-git-send-email-namhyung@gmail.com
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When a user tries to open so many events, perf_event_open syscall may
fail with EMFILE. Provide advise for that case.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1325957132-10600-3-git-send-email-namhyung@gmail.com
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The '-v' option is usually defined via OPT_INCR not _INTEGER. Follow
the trend :).
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1325957132-10600-2-git-send-email-namhyung@gmail.com
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (185 commits)
powerpc: fix compile error with 85xx/p1010rdb.c
powerpc: fix compile error with 85xx/p1023_rds.c
powerpc/fsl: add MSI support for the Freescale hypervisor
arch/powerpc/sysdev/fsl_rmu.c: introduce missing kfree
powerpc/fsl: Add support for Integrated Flash Controller
powerpc/fsl: update compatiable on fsl 16550 uart nodes
powerpc/85xx: fix PCI and localbus properties in p1022ds.dts
powerpc/85xx: re-enable ePAPR byte channel driver in corenet32_smp_defconfig
powerpc/fsl: Update defconfigs to enable some standard FSL HW features
powerpc: Add TBI PHY node to first MDIO bus
sbc834x: put full compat string in board match check
powerpc/fsl-pci: Allow 64-bit PCIe devices to DMA to any memory address
powerpc: Fix unpaired probe_hcall_entry and probe_hcall_exit
offb: Fix setting of the pseudo-palette for >8bpp
offb: Add palette hack for qemu "standard vga" framebuffer
offb: Fix bug in calculating requested vram size
powerpc/boot: Change the WARN to INFO for boot wrapper overlap message
powerpc/44x: Fix build error on currituck platform
powerpc/boot: Change the load address for the wrapper to fit the kernel
powerpc/44x: Enable CRASH_DUMP for 440x
...
Fix up a trivial conflict in arch/powerpc/include/asm/cputime.h due to
the additional sparse-checking code for cputime_t.
Fixes:
|make: *** No rule to make target `../../include/linux/const.h', needed by `builtin-annotate.o'. Stop.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1324128938-17553-1-git-send-email-sebastian@breakpoint.cc
Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To restrict a counter to either host or guest mode this patch introduces
two new event modifiers: G and H.
With G the counter is configured in guest-only mode and with H in
host-only mode.
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Link: http://lkml.kernel.org/n/tip-or5aj3rghy9ngyg882z6kln9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make use of exclude_guest and exlude_host in perf-kvm to do only
guest-only counting by default.
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
[ committer note: Moved perf_{guest,host} & event_attr_init to util.c ]
[ so as not to drag more stuff to the python binding]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It will be recalculated at __hists__output_resort, to take into account
filters possibly applied by the TUI, etc.
Since we do the percent math only for those entries that will appear on
the TUI instead of for _all_ the entries at decay time, updating it for
each sample makes the entries seem to decay faster when using the
navigation keys (since the screen will be refreshed), as we're not
coalescing the entries that are being batched to be merged at next
resort/decay time, but considering their periods.
Bug introduced in 743eb86.
Reported-by: Ingo Molnar <mingo@elte.hu>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-k0d0rq9a8nqtkqohov8cir72@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stop using this python/OOP convention, doesn't really helps. Will do
more from time to time till we get it cleaned up in all of /perf.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-me4dyj6s5snh7jr8wb9gzt82@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stephane Eranian
Roberto Agostino Vitillo
Namhyung Kim
Ingo Molnar
Arnaldo Carvalho de Melo
Joerg Roedel
David Ahern
Prashanth Nageshappa
Danny Kukawka
Stefan Hajnoczi
Robert Richter
Jiri Olsa
Namhyung Kim
Franck Bui-Huu
Naveen N. Rao
Srikar Dronamraju
John Kacur
David Daney
Akihiro Nagai
Masanari Iida
Jan Beulich
Linus Torvalds
Konstantin Khlebnikov
Sebastian Andrzej Siewior