Граф коммитов

36 Коммитов

Автор SHA1 Сообщение Дата
Sven Eckelmann 6b1aea8cf2 batman-adv: Update copyright years for 2018
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-02-26 17:57:39 +01:00
Sven Eckelmann 7e9a8c2ce7 batman-adv: Use parentheses in function kernel-doc
The documentation describing kernel-doc comments for functions ("How to
format kernel-doc comments") uses parentheses at the end of the function
name. Using this format allows to use a consistent style when adding
documentation to a function and when referencing this function in a
different kernel-doc section.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-12-15 17:29:20 +01:00
Sven Eckelmann 7db7d9f369 batman-adv: Add SPDX license identifier above copyright header
The "Linux kernel licensing rules" require that each file has a SPDX
license identifier as first line (and sometimes as second line).

The FSFE REUSE practices [1] would also require the same tags but have no
restrictions on the placement in the source file. Using the "Linux kernel
licensing rules" is therefore also fulfilling the FSFE REUSE practices
requirements at the same time.

[1] https://reuse.software/practices/

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-12-15 17:22:45 +01:00
Andreas Pape 00311de5fb batman-adv: prevent multiple ARP replies sent by gateways if dat enabled
If dat is enabled it must be made sure that only the backbone gw which has
claimed the remote destination for the ARP request answers the ARP request
directly if the MAC address is known due to the local dat table. This
prevents multiple ARP replies in a common backbone if more than one
gateway already knows the remote mac searched for in the ARP request.

Signed-off-by: Andreas Pape <apape@phoenixcontact.com>
Acked-by: Simon Wunderlich <sw@simonwunderlich.de>
[sven@narfation.org: fix conflicts with current version]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-03-22 10:30:53 +01:00
Sven Eckelmann ac79cbb96b batman-adv: update copyright years for 2017
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-01-26 08:34:19 +01:00
Simon Wunderlich d3e9768ab9 batman-adv: don't add loop detect macs to TT
The bridge loop avoidance (BLA) feature of batman-adv sends packets to
probe for Mesh/LAN packet loops. Those packets are not sent by real
clients and should therefore not be added to the translation table (TT).

Signed-off-by: Simon Wunderlich <simon.wunderlich@open-mesh.com>
2017-01-26 08:34:18 +01:00
Simon Wunderlich ea4152e117 batman-adv: add backbone table netlink support
Dump the list of bridge loop avoidance backbones via the netlink socket.

Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-08-09 07:54:43 +02:00
Andrew Lunn 04f3f5bf18 batman-adv: add B.A.T.M.A.N. Dump BLA claims via netlink
Dump the list of bridge loop avoidance claims via the netlink socket.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
[sven.eckelmann@open-mesh.com: add policy for attributes, fix includes, fix
soft_iface reference leak]
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
[sw@simonwunderlich.de: fix kerneldoc, fix error reporting]
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-08-09 07:54:42 +02:00
Sven Eckelmann 4b426b108a batman-adv: Use bool as return type for boolean functions
It is easier to understand that the returned value of a specific function
doesn't have to be 0 when the functions was successful when the actual
return type is bool. This is especially true when all surrounding functions
with return type int use negative values to return the error code.

Reported-by: Nicholas Krause <xerofoify@gmail.com>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-10 18:28:54 +08:00
Sven Eckelmann 0046b0402a batman-adv: update copyright years for 2016
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-02 12:55:10 +08:00
Simon Wunderlich d68081a240 batman-adv: purge bridge loop avoidance when its disabled
When bridge loop avoidance is disabled through sysfs, the internal
datastructures are not disabled, but only BLA operations are disabled.
To be sure that they are removed, purge the data immediately. That is
especially useful if a firmwares network state is changed, and the BLA
wait periods should restart on the new network.

Signed-off-by: Simon Wunderlich <simon@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-01-09 20:56:00 +08:00
Sven Eckelmann 2bdd1888f1 batman-adv: Remove batadv_ types forward declarations
main.h is included in every file and is the only way to access types.h.
This makes forward declarations for all types defined in types.h
unnecessary.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-25 00:12:20 +02:00
Sven Eckelmann 6b5e971a28 batman-adv: Replace C99 int types with kernel type
(s|u)(8|16|32|64) are the preferred types in the kernel. The use of the
standard C99 types u?int(8|16|32|64)_t are objected by some people and even
checkpatch now warns about using them.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-25 00:12:17 +02:00
Sven Eckelmann 1e2c2a4fe4 batman-adv: Add required includes to all files
The header files could not be build indepdent from each other. This is
happened because headers didn't include the files for things they've used.
This was problematic because the success of a build depended on the
knowledge about the right order of local includes.

Also source files were not including everything they've used explicitly.
Instead they required that transitive includes are always stable. This is
problematic because some transitive includes are not obvious, depend on
config settings and may not be stable in the future.

The order for include blocks are:

 * primary headers (main.h and the *.h file of a *.c file)
 * global linux headers
 * required local headers
 * extra forward declarations for pointers in function/struct declarations

The only exceptions are linux/bitops.h and linux/if_ether.h in packet.h.
This header file is shared with userspace applications like batctl and must
therefore build together with userspace applications. The header
linux/bitops.h is not part of the uapi headers and linux/if_ether.h
conflicts with the musl implementation of netinet/if_ether.h. The
maintainers rejected the use of __KERNEL__ preprocessor checks and thus
these two headers are only in main.h. All files using packet.h first have
to include main.h to work correctly.

Reported-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-06-07 17:07:19 +02:00
Sven Eckelmann 9f6446c7f9 batman-adv: update copyright years for 2015
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-05-29 10:13:35 +02:00
Simon Wunderlich e19f9759ed batman-adv: update copyright years for 2014
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-01-12 14:41:19 +01:00
Antonio Quartulli ebf38fb7ab batman-adv: remove FSF address from GPL disclaimer
As suggested by checkpatch, remove all the references to the
FSF address since the kernel already has one reference in
its documentation.

In this way it is easier to update it in case of future
changes.

Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2014-01-08 20:49:39 +01:00
Antonio Quartulli cfd4f75701 batman-adv: make the backbone gw check VLAN specific
The backbone gw check has to be VLAN specific so that code
using it can specify VID where the check has to be done.

In the TT code, the check has been moved into the
tt_global_add() function so that it can be performed on a
per-entry basis instead of ignoring all the TT data received
from another backbone node. Only TT global entries belonging
to the VLAN where the backbone node is connected to are
skipped.
All the other spots where the TT code was checking whether a
node is a backbone have been removed.

Moreover, batadv_bla_is_backbone_gw_orig() now returns bool
since it used to return only 1 or 0.

Cc: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-19 23:25:38 +02:00
Antonio Quartulli eb2deb6b39 batman-adv: change VID semantic in the BLA code
In order to make batman-adv fully vlan aware later, the
semantic used for variables storing the VLAN ID values has
to be changed in order to be adapted to the new one which
will be used batman-adv wide.

In particular, the VID has to be an "_unsigned_ short int"
and its 4 MSB will be used as a flag bitfield, while the
remaining 12 bits are used to store the real VID value

Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Acked-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
2013-05-29 02:44:55 +02:00
Antonio Quartulli 0b87393146 batman-adv: update copyright years
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-01-19 21:18:12 +08:00
Simon Wunderlich 004e86fc58 batman-adv: Fix broadcast duplist for fragmentation
If the skb is fragmented, the checksum must be computed on the
individual fragments, just using skb->data may fail on fragmented
data. Instead of doing linearizing the packet, use the new
batadv_crc32 to do that more efficiently- it should not hurt
replacing the old crc16 by the new crc32.

Reported-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-11-21 12:35:45 +01:00
Simon Wunderlich 536a23f119 batman-adv: Add the backbone gateway list to debugfs
This is especially useful if there are no claims yet, but we still want
to know which gateways are using bridge loop avoidance in the network.

Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-08-23 14:02:41 +02:00
Antonio Quartulli c70437289c batman-adv: move function arguments on one line
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-08-23 14:02:40 +02:00
David S. Miller 04c9f416e3 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	net/batman-adv/bridge_loop_avoidance.c
	net/batman-adv/bridge_loop_avoidance.h
	net/batman-adv/soft-interface.c
	net/mac80211/mlme.c

With merge help from Antonio Quartulli (batman-adv) and
Stephen Rothwell (drivers/net/usb/qmi_wwan.c).

The net/mac80211/mlme.c conflict seemed easy enough, accounting for a
conversion to some new tracing macros.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10 23:56:33 -07:00
Simon Wunderlich 2d3f6ccc4e batman-adv: check incoming packet type for bla
If the gateway functionality is used, some broadcast packets (DHCP
requests) may be transmitted as unicast packets. As the bridge loop
avoidance code now only considers the payload Ethernet destination,
it may drop the DHCP request for clients which are claimed by other
backbone gateways, because it falsely infers from the broadcast address
that the right backbone gateway should havehandled the broadcast.

Fix this by checking and delegating the batman-adv packet type used
for transmission.

Reported-by: Guido Iribarren <guidoiribarren@buenosaireslibre.org>
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
2012-07-06 00:08:46 +02:00
Sven Eckelmann 56303d34a3 batman-adv: Prefix types structs with batadv_
Reported-by: Martin Hundebøll <martin@hundeboll.net>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-07-01 22:47:21 +02:00
Sven Eckelmann 9641269011 batman-adv: Prefix packet structs with batadv_
Reported-by: Martin Hundebøll <martin@hundeboll.net>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-07-01 22:47:21 +02:00
Sven Eckelmann 3964f7285e batman-adv: Prefix bridge_loop_avoidance defines with BATADV_
Reported-by: Martin Hundebøll <martin@hundeboll.net>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-06-28 08:44:56 +02:00
Sven Eckelmann 9cfc7bd608 batman-adv: Reformat multiline comments to consistent style
batman-adv doesn't follow the style for multiline comments that David S. Miller
prefers. All comments should be reformatted to follow this consistent style to
make the code slightly more readable.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-06-20 22:15:33 +02:00
Sven Eckelmann 08adf15122 batman-adv: Prefix bridge_loop_avoidance non-static functions with batadv_
batman-adv can be compiled as part of the kernel instead of an module. In that
case the linker will see all non-static symbols of batman-adv and all other
non-static symbols of the kernel. This could lead to symbol collisions. A
prefix for the batman-adv symbols that defines their private namespace avoids
such a problem.

Reported-by: David Miller <davem@davemloft.net>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-06-20 22:15:17 +02:00
Antonio Quartulli c64703aace batman-adv: update copyright years
update copyright years in order to include 2012

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-05-11 13:56:07 +02:00
Simon Wunderlich 7a5cc24277 batman-adv: add bridge loop avoidance compile option
The define CONFIG_BATMAN_ADV_BLA switches the bridge loop avoidance
on - skip it, and the bridge loop avoidance is not compiled in.

This is useful if binary size should be saved or the feature is
not needed.

Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-04-11 14:29:00 +02:00
Simon Wunderlich fe2da6ff27 batman-adv: add broadcast duplicate check
When multiple backbone gateways relay the same broadcast from the
backbone into the mesh, other nodes in the mesh may receive this
broadcast multiple times. To avoid this, the crc checksums of
received broadcasts are recorded and new broadcast packets with
the same content may be dropped if received by another gateway.

Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-04-11 14:28:59 +02:00
Simon Wunderlich 20ff9d593f batman-adv: don't let backbone gateways exchange tt entries
As the backbone gateways are connected to the same backbone, they
should announce the same clients on the backbone non-exclusively.

Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-04-11 14:28:59 +02:00
Simon Wunderlich 9bf8e4d425 batman-adv: export claim tables through debugfs
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-04-11 14:28:59 +02:00
Simon Wunderlich 23721387c4 batman-adv: add basic bridge loop avoidance code
This second version of the bridge loop avoidance for batman-adv
avoids loops between the mesh and a backbone (usually a LAN).

By connecting multiple batman-adv mesh nodes to the same ethernet
segment a loop can be created when the soft-interface is bridged
into that ethernet segment. A simple visualization of the loop
involving the most common case - a LAN as ethernet segment:

node1  <-- LAN  -->  node2
  |                   |
wifi   <-- mesh -->  wifi

Packets from the LAN (e.g. ARP broadcasts) will circle forever from
node1 or node2 over the mesh back into the LAN.

With this patch, batman recognizes backbone gateways, nodes which are
part of the mesh and backbone/LAN at the same time. Each backbone
gateway "claims" clients from within the mesh to handle them
exclusively. By restricting that only responsible backbone gateways
may handle their claimed clients traffic, loops are effectively
avoided.

Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-04-11 14:28:58 +02:00