Граф коммитов

173 Коммитов

Автор SHA1 Сообщение Дата
Florian Westphal 5cbabeec1e netfilter: nat: remove nf_nat_l4proto struct
This removes the (now empty) nf_nat_l4proto struct, all its instances
and all the no longer needed runtime (un)register functionality.

nf_nat_need_gre() can be axed as well: the module that calls it (to
load the no-longer-existing nat_gre module) also calls other nat core
functions. GRE nat is now always available if kernel is built with it.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-12-17 23:33:31 +01:00
Florian Westphal faec18dbb0 netfilter: nat: remove l4proto->manip_pkt
This removes the last l4proto indirection, the two callers, the l3proto
packet mangling helpers for ipv4 and ipv6, now call the
nf_nat_l4proto_manip_pkt() helper.

nf_nat_proto_{dccp,tcp,sctp,gre,icmp,icmpv6} are left behind, even though
they contain no functionality anymore to not clutter this patch.

Next patch will remove the empty files and the nf_nat_l4proto
struct.

nf_nat_proto_udp.c is renamed to nf_nat_proto.c, as it now contains the
other nat manip functionality as well, not just udp and udplite.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-12-17 23:33:29 +01:00
Florian Westphal 76b90019e0 netfilter: nat: remove l4proto->nlattr_to_range
all protocols did set this to nf_nat_l4proto_nlattr_to_range, so
just call it directly.

The important difference is that we'll now also call it for
protocols that we don't support (i.e., nf_nat_proto_unknown did
not provide .nlattr_to_range).

However, there should be no harm, even icmp provided this callback.
If we don't implement a specific l4nat for this, nothing would make
use of this information, so adding a big switch/case construct listing
all supported l4protocols seems a bit pointless.

This change leaves a single function pointer in the l4proto struct.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-12-17 23:33:23 +01:00
Florian Westphal 6c47260250 netfilter: nf_tables: add xfrm expression
supports fetching saddr/daddr of tunnel mode states, request id and spi.
If direction is 'in', use inbound skb secpath, else dst->xfrm.

Joint work with Máté Eckl.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-09-17 11:40:08 +02:00
Pablo Neira Ayuso af308b94a2 netfilter: nf_tables: add tunnel support
This patch implements the tunnel object type that can be used to
configure tunnels via metadata template through the existing lightweight
API from the ingress path.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-08-03 21:12:12 +02:00
Máté Eckl 4ed8eb6570 netfilter: nf_tables: Add native tproxy support
A great portion of the code is taken from xt_TPROXY.c

There are some changes compared to the iptables implementation:
 - tproxy statement is not terminal here
 - Either address or port has to be specified, but at least one of them
   is necessary. If one of them is not specified, the evaluation will be
   performed with the original attribute of the packet (ie. target port
   is not specified => the packet's dport will be used).

To make this work in inet tables, the tproxy structure has a family
member (typically called priv->family) which is not necessarily equal to
ctx->family.

priv->family can have three values legally:
 - NFPROTO_IPV4 if the table family is ip OR if table family is inet,
   but an ipv4 address is specified as a target address. The rule only
   evaluates ipv4 packets in this case.
 - NFPROTO_IPV6 if the table family is ip6 OR if table family is inet,
   but an ipv6 address is specified as a target address. The rule only
   evaluates ipv6 packets in this case.
 - NFPROTO_UNSPEC if the table family is inet AND if only the port is
   specified. The rule will evaluate both ipv4 and ipv6 packets.

Signed-off-by: Máté Eckl <ecklm94@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-07-30 14:07:12 +02:00
Fernando Fernandez Mancera b96af92d6e netfilter: nf_tables: implement Passive OS fingerprint module in nft_osf
Add basic module functions into nft_osf.[ch] in order to implement OSF
module in nf_tables.

Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-07-30 14:07:11 +02:00
Fernando Fernandez Mancera f6b7b5f4f3 netfilter: nf_osf: rename nf_osf.c to nfnetlink_osf.c
Rename nf_osf.c to nfnetlink_osf.c as we introduce nfnetlink_osf which is
the OSF infraestructure.

Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-07-30 14:07:10 +02:00
David S. Miller 99d20a461c Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next
Pablo Neira Ayuso says:

====================
Netfilter/IPVS updates for net-next

The following patchset contains Netfilter/IPVS updates for your net-next
tree:

1) No need to set ttl from reject action for the bridge family, from
   Taehee Yoo.

2) Use a fixed timeout for flow that are passed up from the flowtable
   to conntrack, from Florian Westphal.

3) More preparation patches for tproxy support for nf_tables, from Mate
   Eckl.

4) Remove unnecessary indirection in core IPv6 checksum function, from
   Florian Westphal.

5) Use nf_ct_get_tuplepr() from openvswitch, instead of opencoding it.
   From Florian Westphal.

6) socket match now selects socket infrastructure, instead of depending
   on it. From Mate Eckl.

7) Patch series to simplify conntrack tuple building/parsing from packet
   path and ctnetlink, from Florian Westphal.

8) Fetch timeout policy from protocol helpers, instead of doing it from
   core, from Florian Westphal.

9) Merge IPv4 and IPv6 protocol trackers into conntrack core, from
   Florian Westphal.

10) Depend on CONFIG_NF_TABLES_IPV6 and CONFIG_IP6_NF_IPTABLES
    respectively, instead of IPV6. Patch from Mate Eckl.

11) Add specific function for garbage collection in conncount,
    from Yi-Hung Wei.

12) Catch number of elements in the connlimit list, from Yi-Hung Wei.

13) Move locking to nf_conncount, from Yi-Hung Wei.

14) Series of patches to add lockless tree traversal in nf_conncount,
    from Yi-Hung Wei.

15) Resolve clash in matching conntracks when race happens, from
    Martynas Pumputis.

16) If connection entry times out, remove template entry from the
    ip_vs_conn_tab table to improve behaviour under flood, from
    Julian Anastasov.

17) Remove useless parameter from nf_ct_helper_ext_add(), from Gao feng.

18) Call abort from 2-phase commit protocol before requesting modules,
    make sure this is done under the mutex, from Florian Westphal.

19) Grab module reference when starting transaction, also from Florian.

20) Dynamically allocate expression info array for pre-parsing, from
    Florian.

21) Add per netns mutex for nf_tables, from Florian Westphal.

22) A couple of patches to simplify and refactor nf_osf code to prepare
    for nft_osf support.

23) Break evaluation on missing socket, from Mate Eckl.

24) Allow to match socket mark from nft_socket, from Mate Eckl.

25) Remove dependency on nf_defrag_ipv6, now that IPv6 tracker is
    built-in into nf_conntrack. From Florian Westphal.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-20 22:28:28 -07:00
Florian Westphal a0ae2562c6 netfilter: conntrack: remove l3proto abstraction
This unifies ipv4 and ipv6 protocol trackers and removes the l3proto
abstraction.

This gets rid of all l3proto indirect calls and the need to do
a lookup on the function to call for l3 demux.

It increases module size by only a small amount (12kbyte), so this reduces
size because nf_conntrack.ko is useless without either nf_conntrack_ipv4
or nf_conntrack_ipv6 module.

before:
   text    data     bss     dec     hex filename
   7357    1088       0    8445    20fd nf_conntrack_ipv4.ko
   7405    1084       4    8493    212d nf_conntrack_ipv6.ko
  72614   13689     236   86539   1520b nf_conntrack.ko
 19K nf_conntrack_ipv4.ko
 19K nf_conntrack_ipv6.ko
179K nf_conntrack.ko

after:
   text    data     bss     dec     hex filename
  79277   13937     236   93450   16d0a nf_conntrack.ko
  191K nf_conntrack.ko

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-07-17 15:27:49 +02:00
Florian Westphal 6816d931ca netfilter: conntrack: remove get_l4proto indirection from l3 protocol trackers
Handle it in the core instead.

ipv6_skip_exthdr() is built-in even if ipv6 is a module, i.e. this
doesn't create an ipv6 dependency.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-07-16 17:54:59 +02:00
Pablo Neira Ayuso e240cd0df4 netfilter: nf_tables: place all set backends in one single module
This patch disallows rbtree with single elements, which is causing
problems with the recent timeout support. Before this patch, you
could opt out individual set representations per module, which is
just adding extra complexity.

Fixes: 8d8540c4f5e0("netfilter: nft_set_rbtree: add timeout support")
Reported-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-07-06 19:31:53 +02:00
Pablo Neira Ayuso 290180e244 netfilter: nf_tables: add connlimit support
This features which allows you to limit the maximum number of
connections per arbitrary key. The connlimit expression is stateful,
therefore it can be used from meters to dynamically populate a set, this
provides a mapping to the iptables' connlimit match. This patch also
comes that allows you define static connlimit policies.

This extension depends on the nf_conncount infrastructure.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-06-03 01:18:29 +02:00
Máté Eckl 554ced0a6e netfilter: nf_tables: add support for native socket matching
Now it can only match the transparent flag of an ip/ipv6 socket.

Signed-off-by: Máté Eckl <ecklm94@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-06-01 09:46:15 +02:00
Florian Westphal 1ac89d2015 netfilter: nat: merge nf_nat_redirect into nf_nat
Similar to previous patch, this time, merge redirect+nat.
The redirect module is just 2k in size, get rid of it and make
redirect part available from the nat core.

before:
   text    data     bss     dec     hex filename
  19461    1484    4138   25083    61fb net/netfilter/nf_nat.ko
   1236     792       0    2028     7ec net/netfilter/nf_nat_redirect.ko
after:
  20340    1508    4138   25986    6582 net/netfilter/nf_nat.ko

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-05-29 00:25:40 +02:00
Fernando Fernandez Mancera bfb15f2a95 netfilter: extract Passive OS fingerprint infrastructure from xt_osf
Add nf_osf_ttl() and nf_osf_match() into nf_osf.c to prepare for
nf_tables support.

Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-05-07 00:02:11 +02:00
Florian Westphal d0103158cf netfilter: nf_tables: merge exthdr expression into nft core
before:
   text    data     bss     dec     hex filename
   5056     844       0    5900    170c net/netfilter/nft_exthdr.ko
 102456    2316     401  105173   19ad5 net/netfilter/nf_tables.ko

after:
 106410    2392     401  109203   1aa93 net/netfilter/nf_tables.ko

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-04-27 00:00:56 +02:00
Florian Westphal ae1bc6a9f3 netfilter: nf_tables: merge rt expression into nft core
before:
   text    data     bss     dec     hex filename
   2657     844       0    3501     dad net/netfilter/nft_rt.ko
 100826    2240     401  103467   1942b net/netfilter/nf_tables.ko
after:
   2657     844       0    3501     dad net/netfilter/nft_rt.ko
 102456    2316     401  105173   19ad5 net/netfilter/nf_tables.ko

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-04-27 00:00:55 +02:00
Florian Westphal 8a22543c8e netfilter: nf_tables: make meta expression builtin
size net/netfilter/nft_meta.ko
   text    data     bss     dec     hex filename
   5826     936       1    6763    1a6b net/netfilter/nft_meta.ko
  96407    2064     400   98871   18237 net/netfilter/nf_tables.ko

after:
 100826    2240     401  103467   1942b net/netfilter/nf_tables.ko

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-04-27 00:00:46 +02:00
Felix Fietkau 7d20868717 netfilter: nf_flow_table: move ipv4 offload hook code to nf_flow_table
Allows some minor code sharing with the ipv6 hook code and is also
useful as preparation for adding iptables support for offload

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-04-24 10:27:16 +02:00
Felix Fietkau 1a999d899b netfilter: nf_flow_table: rename nf_flow_table.c to nf_flow_table_core.c
Preparation for adding more code to the same module

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-04-21 19:41:55 +02:00
Pablo Neira Ayuso 02c7b25e5f netfilter: nf_tables: build-in filter chain type
One module per supported filter chain family type takes too much memory
for very little code - too much modularization - place all chain filter
definitions in one single file.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-03-30 11:29:19 +02:00
Pablo Neira Ayuso a3c90f7a23 netfilter: nf_tables: flow offload expression
Add new instruction for the nf_tables VM that allows us to specify what
flows are offloaded into a given flow table via name. This new
instruction creates the flow entry and adds it to the flow table.

Only established flows, ie. we have seen traffic in both directions, are
added to the flow table. You can still decide to offload entries at a
later stage via packet counting or checking the ct status in case you
want to offload assured conntracks.

This new extension depends on the conntrack subsystem.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-01-08 18:11:10 +01:00
Pablo Neira Ayuso 7c23b629a8 netfilter: flow table support for the mixed IPv4/IPv6 family
This patch adds the IPv6 flow table type, that implements the datapath
flow table to forward IPv6 traffic.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-01-08 18:11:09 +01:00
Pablo Neira Ayuso ac2a66665e netfilter: add generic flow table infrastructure
This patch defines the API to interact with flow tables, this allows to
add, delete and lookup for entries in the flow table. This also adds the
generic garbage code that removes entries that have expired, ie. no
traffic has been seen for a while.

Users of the flow table infrastructure can delete entries via
flow_offload_dead(), which sets the dying bit, this signals the garbage
collector to release an entry from user context.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-01-08 18:11:07 +01:00
Pablo Neira Ayuso ef71fe27ec netfilter: move checksum indirection to struct nf_ipv6_ops
We cannot make a direct call to nf_ip6_checksum() because that would
result in autoloading the 'ipv6' module because of symbol dependencies.
Therefore, define checksum indirection in nf_ipv6_ops where this really
belongs to.

For IPv4, we can indeed make a direct function call, which is faster,
given IPv4 is built-in in the networking code by default. Still,
CONFIG_INET=n and CONFIG_NETFILTER=y is possible, so define empty inline
stub for IPv4 in such case.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-01-08 18:01:23 +01:00
Florian Westphal 625c556118 netfilter: connlimit: split xt_connlimit into front and backend
This allows to reuse xt_connlimit infrastructure from nf_tables.
The upcoming nf_tables frontend can just pass in an nftables register
as input key, this allows limiting by any nft-supported key, including
concatenations.

For xt_connlimit, pass in the zone and the ip/ipv6 address.

With help from Yi-Hung Wei.

Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Yi-Hung Wei <yihung.wei@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-01-08 18:01:22 +01:00
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Pablo M. Bermudo Garay 6392c22603 netfilter: nf_tables: add fib expression to the netdev family
Add fib expression support for netdev family. Like inet family, netdev
delegates the actual decision to the corresponding backend, either ipv4
or ipv6.

This allows to perform very early reverse path filtering, among other
things.

You can find more information about fib expression in the f6d0cbcf09
("<netfilter: nf_tables: add fib expression>") commit message.

Signed-off-by: Pablo M. Bermudo Garay <pablombg@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-07-31 19:01:40 +02:00
Jike Song 2becbbc547 netfilter, kbuild: use canonical method to specify objs.
Should use ":=" instead of "+=".

Signed-off-by: Jike Song <jike.song@intel.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-06-19 19:09:20 +02:00
Pablo Neira Ayuso 665153ff57 netfilter: nf_tables: add bitmap set type
This patch adds a new bitmap set type. This bitmap uses two bits to
represent one element. These two bits determine the element state in the
current and the future generation that fits into the nf_tables commit
protocol. When dumping elements back to userspace, the two bits are
expanded into a struct nft_set_ext object.

If no NFTA_SET_DESC_SIZE is specified, the existing automatic set
backend selection prefers bitmap over hash in case of keys whose size is
<= 16 bit. If the set size is know, the bitmap set type is selected if
with 16 bit kets and more than 390 elements in the set, otherwise the
hash table set implementation is used.

For 8 bit keys, the bitmap consumes 66 bytes. For 16 bit keys, the
bitmap takes 16388 bytes.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-02-08 14:16:21 +01:00
Florian Westphal 9700ba805b netfilter: nat: merge udp and udplite helpers
udplite nat was copied from udp nat, they are virtually 100% identical.
Not really surprising given udplite is just udp with partial csum coverage.

old:
   text    data     bss     dec     hex filename
  11606    1457     210   13273    33d9 nf_nat.ko
    330       0       2     332     14c nf_nat_proto_udp.o
    276       0       2     278     116 nf_nat_proto_udplite.o
new:
   text    data     bss     dec     hex filename
  11598    1457     210   13265    33d1 nf_nat.ko
    640       0       4     644     284 nf_nat_proto_udp.o

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-01-03 14:33:25 +01:00
Florian Westphal e4781421e8 netfilter: merge udp and udplite conntrack helpers
udplite was copied from udp, they are virtually 100% identical.

This adds udplite tracker to udp instead, removes udplite module,
and then makes the udplite tracker builtin.

udplite will then simply re-use udp timeout settings.
It makes little sense to add separate sysctls, nowadays we have
fine-grained timeout policy support via the CT target.

old:
 text    data     bss     dec     hex filename
 1633     672       0    2305     901 nf_conntrack_proto_udp.o
 1756     672       0    2428     97c nf_conntrack_proto_udplite.o
69526   17937     268   87731   156b3 nf_conntrack.ko

new:
 text    data     bss     dec     hex filename
 2442    1184       0    3626     e2a nf_conntrack_proto_udp.o
68565   17721     268   86554   1521a nf_conntrack.ko

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-01-03 14:33:25 +01:00
Pablo Neira Ayuso c97d22e68b netfilter: nf_tables: add stateful object reference expression
This new expression allows us to refer to existing stateful objects from
rules.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-12-06 21:48:25 +01:00
Davide Caratti 9b91c96c5d netfilter: conntrack: built-in support for UDPlite
CONFIG_NF_CT_PROTO_UDPLITE is no more a tristate. When set to y,
connection tracking support for UDPlite protocol is built-in into
nf_conntrack.ko.

footprint test:
$ ls -l net/netfilter/nf_conntrack{_proto_udplite,}.ko \
        net/ipv4/netfilter/nf_conntrack_ipv4.ko \
        net/ipv6/netfilter/nf_conntrack_ipv6.ko

(builtin)|| udplite|  ipv4  |  ipv6  |nf_conntrack
---------++--------+--------+--------+--------------
none     || 432538 | 828755 | 828676 | 6141434
UDPlite  ||   -    | 829649 | 829362 | 6498204

Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-12-04 20:57:36 +01:00
Davide Caratti a85406afeb netfilter: conntrack: built-in support for SCTP
CONFIG_NF_CT_PROTO_SCTP is no more a tristate. When set to y, connection
tracking support for SCTP protocol is built-in into nf_conntrack.ko.

footprint test:
$ ls -l net/netfilter/nf_conntrack{_proto_sctp,}.ko \
        net/ipv4/netfilter/nf_conntrack_ipv4.ko \
        net/ipv6/netfilter/nf_conntrack_ipv6.ko

(builtin)||  sctp  |  ipv4  |  ipv6  | nf_conntrack
---------++--------+--------+--------+--------------
none     || 498243 | 828755 | 828676 | 6141434
SCTP     ||   -    | 829254 | 829175 | 6547872

Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-12-04 20:55:37 +01:00
Davide Caratti c51d39010a netfilter: conntrack: built-in support for DCCP
CONFIG_NF_CT_PROTO_DCCP is no more a tristate. When set to y, connection
tracking support for DCCP protocol is built-in into nf_conntrack.ko.

footprint test:
$ ls -l net/netfilter/nf_conntrack{_proto_dccp,}.ko \
        net/ipv4/netfilter/nf_conntrack_ipv4.ko \
        net/ipv6/netfilter/nf_conntrack_ipv6.ko

(builtin)||  dccp  |  ipv4  |  ipv6  | nf_conntrack
---------++--------+--------+--------+--------------
none     || 469140 | 828755 | 828676 | 6141434
DCCP     ||   -    | 830566 | 829935 | 6533526

Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-12-04 20:53:15 +01:00
Davide Caratti b8ad652f97 netfilter: built-in NAT support for UDPlite
CONFIG_NF_NAT_PROTO_UDPLITE is no more a tristate. When set to y, NAT
support for UDPlite protocol is built-in into nf_nat.ko.

footprint test:

(nf_nat_proto_)           |udplite || nf_nat
--------------------------+--------++--------
no builtin                | 408048 || 2241312
UDPLITE builtin           |   -    || 2577256

Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-12-04 20:45:32 +01:00
Davide Caratti 7a2dd28c70 netfilter: built-in NAT support for SCTP
CONFIG_NF_NAT_PROTO_SCTP is no more a tristate. When set to y, NAT
support for SCTP protocol is built-in into nf_nat.ko.

footprint test:

(nf_nat_proto_)           | sctp   || nf_nat
--------------------------+--------++--------
no builtin                | 428344 || 2241312
SCTP builtin              |   -    || 2597032

Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-12-04 20:45:31 +01:00
Davide Caratti 0c4e966eaf netfilter: built-in NAT support for DCCP
CONFIG_NF_NAT_PROTO_DCCP is no more a tristate. When set to y, NAT
support for DCCP protocol is built-in into nf_nat.ko.

footprint test:

(nf_nat_proto_)           | dccp   || nf_nat
--------------------------+--------++--------
no builtin                | 409800 || 2241312
DCCP builtin              |   -    || 2578968

Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-12-04 20:45:30 +01:00
Anders K. Pedersen 2fa841938c netfilter: nf_tables: introduce routing expression
Introduces an nftables rt expression for routing related data with support
for nexthop (i.e. the directly connected IP address that an outgoing packet
is sent to), which can be used either for matching or accounting, eg.

 # nft add rule filter postrouting \
	ip daddr 192.168.1.0/24 rt nexthop != 192.168.0.1 drop

This will drop any traffic to 192.168.1.0/24 that is not routed via
192.168.0.1.

 # nft add rule filter postrouting \
	flow table acct { rt nexthop timeout 600s counter }
 # nft add rule ip6 filter postrouting \
	flow table acct { rt nexthop timeout 600s counter }

These rules count outgoing traffic per nexthop. Note that the timeout
releases an entry if no traffic is seen for this nexthop within 10 minutes.

 # nft add rule inet filter postrouting \
	ether type ip \
	flow table acct { rt nexthop timeout 600s counter }
 # nft add rule inet filter postrouting \
	ether type ip6 \
	flow table acct { rt nexthop timeout 600s counter }

Same as above, but via the inet family, where the ether type must be
specified explicitly.

"rt classid" is also implemented identical to "meta rtclassid", since it
is more logical to have this match in the routing expression going forward.

Signed-off-by: Anders K. Pedersen <akp@cohaesio.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-11-01 20:50:31 +01:00
Pablo Neira Ayuso 1fddf4bad0 netfilter: nf_log: add packet logging for netdev family
Move layer 2 packet logging into nf_log_l2packet() that resides in
nf_log_common.c, so this can be shared by both bridge and netdev
families.

This patch adds the boiler plate code to register the netdev logging
family.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-11-01 20:50:30 +01:00
Florian Westphal f6d0cbcf09 netfilter: nf_tables: add fib expression
Add FIB expression, supported for ipv4, ipv6 and inet family (the latter
just dispatches to ipv4 or ipv6 one based on nfproto).

Currently supports fetching output interface index/name and the
rtm_type associated with an address.

This can be used for adding path filtering. rtm_type is useful
to e.g. enforce a strong-end host model where packets
are only accepted if daddr is configured on the interface the
packet arrived on.

The fib expression is a native nftables alternative to the
xtables addrtype and rp_filter matches.

FIB result order for oif/oifname retrieval is as follows:
 - if packet is local (skb has rtable, RTF_LOCAL set, this
   will also catch looped-back multicast packets), set oif to
   the loopback interface.
 - if fib lookup returns an error, or result points to local,
   store zero result.  This means '--local' option of -m rpfilter
   is not supported. It is possible to use 'fib type local' or add
   explicit saddr/daddr matching rules to create exceptions if this
   is really needed.
 - store result in the destination register.
   In case of multiple routes, search set for desired oif in case
   strict matching is requested.

ipv4 and ipv6 behave fib expressions are supposed to behave the same.

[ I have collapsed Arnd Bergmann's ("netfilter: nf_tables: fib warnings")

	http://patchwork.ozlabs.org/patch/688615/

  to address fallout from this patch after rebasing nf-next, that was
  posted to address compilation warnings. --pablo ]

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-11-01 20:50:14 +01:00
Pablo Neira Ayuso 0f3cd9b369 netfilter: nf_tables: add range expression
Inverse ranges != [a,b] are not currently possible because rules are
composites of && operations, and we need to express this:

	data < a || data > b

This patch adds a new range expression. Positive ranges can be already
through two cmp expressions:

	cmp(sreg, data, >=)
	cmp(sreg, data, <=)

This new range expression provides an alternative way to express this.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-09-25 23:16:42 +02:00
Laura Garcia Liebana 91dbc6be0a netfilter: nf_tables: add number generator expression
This patch adds the numgen expression that allows us to generated
incremental and random numbers, this generator is bound to a upper limit
that is specified by userspace.

This expression is useful to distribute packets in a round-robin fashion
as well as randomly.

Signed-off-by: Laura Garcia Liebana <nevola@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-08-22 11:42:22 +02:00
Pablo Neira Ayuso 3d2f30a1df netfilter: nf_tables: add quota expression
This patch adds the quota expression. This new stateful expression
integrate easily into the dynset expression to build 'hashquota' flow
tables.

Arguably, we could use instead "counter bytes > 1000" instead, but this
approach has several problems:

1) We only support for one single stateful expression in dynamic set
   definitions, and the expression above is a composite of two
   expressions: get counter + comparison.

2) We would need to restore the packed counter representation (that we
   used to have) based on seqlock to synchronize this, since per-cpu is
   not suitable for this.

So instead of bloating the counter expression back with the seqlock
representation and extending the existing set infrastructure to make it
more complex for the composite described above, let's follow the more
simple approach of adding a quota expression that we can plug into our
existing infrastructure.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-08-22 11:42:18 +02:00
Laura Garcia Liebana cb1b69b0b1 netfilter: nf_tables: add hash expression
This patch adds a new hash expression, this provides jhash support but
this can be extended to support for other hash functions. The modulus
and seed already comes embedded into this new expression.

Use case example:

	... meta mark set hash ip saddr mod 10

Signed-off-by: Laura Garcia Liebana <nevola@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-08-12 14:16:04 +02:00
Pablo Neira Ayuso 0ed6389c48 netfilter: nf_tables: rename set implementations
Use nft_set_* prefix for backend set implementations, thus we can use
nft_hash for the new hash expression.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-08-12 00:44:37 +02:00
Pablo Neira Ayuso 39e6dea28a netfilter: nf_tables: add forward expression to the netdev family
You can use this to forward packets from ingress to the egress path of
the specified interface. This provides a fast path to bounce packets
from one interface to another specific destination interface.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-01-04 17:48:38 +01:00
Pablo Neira Ayuso 502061f81d netfilter: nf_tables: add packet duplication to the netdev family
You can use this to duplicate packets and inject them at the egress path
of the specified interface. This duplication allows you to inspect
traffic from the dummy or any other interface dedicated to this purpose.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-01-03 21:04:23 +01:00