Now that VMLINUX_SYMBOL() is no-op and being removed, let's stop
checking VMLINUX_SYMBOL().
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX was selected by BLACKFIN, METAG.
They were removed by commit 4ba66a9760 ("arch: remove blackfin port"),
commit bb6fb6dfcc ("metag: Remove arch/metag/"), respectively.
No more architecture enables CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX.
Clean up the rest of scripts, and remove the Kconfig entry.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX was selected by BLACKFIN, METAG.
They were removed by commit 4ba66a9760 ("arch: remove blackfin port"),
commit bb6fb6dfcc ("metag: Remove arch/metag/"), respectively.
No more architecture enables CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX,
hence the last argument of scripts/depmod.sh can be removed.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX was selected by BLACKFIN, METAG.
They were removed by commit 4ba66a9760 ("arch: remove blackfin port"),
commit bb6fb6dfcc ("metag: Remove arch/metag/"), respectively.
No more architecture enables CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX,
hence the --symbol-prefix option is unnecessary.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX was selected by BLACKFIN, METAG.
They were removed by commit 4ba66a9760 ("arch: remove blackfin port"),
commit bb6fb6dfcc ("metag: Remove arch/metag/"), respectively.
No more architecture enables CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX,
hence the -s (--symbol-prefix) option is unnecessary.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX was selected by BLACKFIN, METAG.
They were removed by commit 4ba66a9760 ("arch: remove blackfin port"),
commit bb6fb6dfcc ("metag: Remove arch/metag/"), respectively.
No more architecture enables CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX,
hence VMLINUX_SYMBOL_STR(foo) can be simplify replaced with "foo".
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
There is multiple issues with the genaration of maintainer string
It uses DEBEMAIL and EMAIL enviroment variables, which may contain angle brackets,
creating invalid maintainer strings. The documented KBUILD_BUILD_USER and
KBUILD_BUILD_HOST variables are not used. Undocumented and uncommon NAME
variable is used. Refactor the Maintainer string to:
- use EMAIL or DEBEMAIL directly if they are in form "name <user@host>"
- use KBUILD_BUILD_USER and KBUILD_BUILD_HOST if set before falling
back to autodetection
- no longer use NAME variable or the useless Anonymous string
The logic is switched from multiline if/then/fi statements to compact
shell variable substition commands.
Reported-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
dtc gained some new warnings for OF graphs and unique unit addresses,
but they are currently much too noisy. So turn off
'graph_child_address', 'graph_port', and 'unique_unit_address' warnings
by default. They can be enabled by building dtbs with W=1.
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: linux-kbuild@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
This adds the following commits from upstream:
84e414b0b5bc tests: Add a test case for the omit-if-no-ref keyword
4038fd90056e dtc: add ability to make nodes conditional on them being referenced
e1f139ea4900 checks: drop warning for missing PCI bridge bus-range
f4eba68d89ee checks: Print duplicate node name instead of parent name
46df1fb1b211 .travis.yml: Run valgrind checks via Travis
14a3002a1aee tests: Update valgrind suppressions for sw_tree1
02c5fe9debc0 tests: Remove valgrind error from tests/get_path
df536831d02c checks: add graph binding checks
2347c96edcbe checks: add a check for duplicate unit-addresses of child nodes
8f1b35f88395 Correct overlay syntactic sugar for generating target-path fragments
afbddcd418fb Suppress warnings on overlay fragments
119e27300359 Improve tests for dtc overlay generation
Signed-off-by: Rob Herring <robh@kernel.org>
Running 'test -r' on an awk variable name whose value is an empty
string results in test being run with no arguments, and causes system()
to return 0, which indicates success when used to test values returned
by function calls. This results in code within the if blocks being run
when it should not be.
Instead of testing if a file is accessible and readable via calls to
system("test -r " file), rely on the value returned by getline to perform
this kind of testing. Getline returns -1 on error, with the code within
the while loops not being run.
Signed-off-by: Alexander Kapshuk <alexander.kapshuk@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove stderr redirection to stdout from all the parameters to the
version() function, and put it with the body of the version() function
instead.
This improves code readability.
Signed-off-by: Alexander Kapshuk <alexander.kapshuk@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Due to missing a missing entry in file2alias.c MODULE_DEVICE_TABLE() are
not generating the proper module aliases. Add the needed entry here.
Fixes: bcabbccabf ("rpmsg: add virtio-based remote processor messaging bus")
Reported-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The bpf syscall and selftests conflicts were trivial
overlapping changes.
The r8169 change involved moving the added mdelay from 'net' into a
different function.
A TLS close bug fix overlapped with the splitting of the TLS state
into separate TX and RX parts. I just expanded the tests in the bug
fix from "ctx->conf == X" into "ctx->tx_conf == X && ctx->rx_conf
== X".
Signed-off-by: David S. Miller <davem@davemloft.net>
When addr2line output contains discriminator, the current awk script
cannot parse it. This patch fixes it by extracting key words using
regex which is more reliable.
$ scripts/faddr2line vmlinux tlb_flush_mmu_free+0x26
tlb_flush_mmu_free+0x26/0x50:
tlb_flush_mmu_free at mm/memory.c:258 (discriminator 3)
scripts/faddr2line: eval: line 173: unexpected EOF while looking for matching `)'
Link: http://lkml.kernel.org/r/1525323379-25193-1-git-send-email-changbin.du@intel.com
Fixes: 6870c0165f ("scripts/faddr2line: show the code context")
Signed-off-by: Changbin Du <changbin.du@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: NeilBrown <neilb@suse.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The original shell script works, but:
1) it is too slow;
2) it is hard to exclude rejex patterns
Convert it to perl.
Here, the new version is able to check the entire tree in
less than a second (after cached):
real 0m0,284s
user 0m0,668s
sys 0m0,778s
The old version takes more than a minute to complete (also
after cached):
real 1m17,905s
user 0m25,583s
sys 0m55,334s
It also produce less false-positives (if any).
The new script also contains an auto-fix mode.
Usually, file references get lost when they're moved to some other
place and/or renamed to .rst.
Add an experimental mode to auto-fix those.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Underscores in symbol names are translated into slashes for path names.
Filesystems treat consecutive slashes as if there was only one, so
let's do the same in the dependency list for easier grepping, etc.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
- remove state comment in modpost
- extend MAINTAINERS entry to cover modpost and more makefiles
- fix missed building of SANCOV gcc-plugin
- replace left-over 'bison' with $(YACC)
- display short log when generating parer of genksyms
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=UJhz
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- remove state comment in modpost
- extend MAINTAINERS entry to cover modpost and more makefiles
- fix missed building of SANCOV gcc-plugin
- replace left-over 'bison' with $(YACC)
- display short log when generating parer of genksyms
* tag 'kbuild-fixes-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
genksyms: fix typo in parse.tab.{c,h} generation rules
kbuild: replace hardcoded bison in cmd_bison_h with $(YACC)
gcc-plugins: fix build condition of SANCOV plugin
MAINTAINERS: Update Kbuild entry with a few paths
modpost: delete stale comment
'quet' is replaced by 'quiet' in scripts/genksyms/Makefile
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Since commit d677a4d601 ("Makefile: support flag
-fsanitizer-coverage=trace-cmp"), you miss to build the SANCOV
plugin under some circumstances.
CONFIG_KCOV=y
CONFIG_KCOV_ENABLE_COMPARISONS=y
Your compiler does not support -fsanitize-coverage=trace-pc
Your compiler does not support -fsanitize-coverage=trace-cmp
Under this condition, $(CFLAGS_KCOV) is not empty but contains a
space, so the following ifeq-conditional is false.
ifeq ($(CFLAGS_KCOV),)
Then, scripts/Makefile.gcc-plugins misses to add sancov_plugin.so to
gcc-plugin-y while the SANCOV plugin is necessary as an alternative
means.
Fixes: d677a4d601 ("Makefile: support flag -fsanitizer-coverage=trace-cmp")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Kees Cook <keescook@chromium.org>
From now on, I'll start using my @kernel.org as my development e-mail.
As such, let's remove the entries that point to the old
mchehab@s-opensource.com at MAINTAINERS file.
For the files written with a copyright with mchehab@s-opensource,
let's keep Samsung on their names, using mchehab+samsung@kernel.org,
in order to keep pointing to my employer, with sponsors the work.
For the files written before I join Samsung (on July, 4 2013),
let's just use mchehab@kernel.org.
For bug reports, we can simply point to just kernel.org, as
this will reach my mchehab+samsung inbox anyway.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Brian Warner <brian.warner@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Commit 7840fea200 ("kbuild: Fix computing srcversion for modules")
fixed the comment above parse_source_files to refer to the new source_
line, but left this one behind that could still give the impression that
drivers/net/dummy.c appears in the deps_ variable.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The Python script used to parse and extract eBPF helpers documentation
from include/uapi/linux/bpf.h expects a very specific formatting for the
descriptions (single dot represents a space, '>' stands for a tab):
/*
...
*.int bpf_helper(list of arguments)
*.> Description
*.> > Start of description
*.> > Another line of description
*.> > And yet another line of description
*.> Return
*.> > 0 on success, or a negative error in case of failure
...
*/
This is too strict, and painful for developers who wants to add
documentation for new helpers. Worse, it is extremely difficult to check
that the formatting is correct during reviews. Change the format
expected by the script and make it more flexible. The script now works
whether or not the initial space (right after the star) is present, and
accepts both tabs and white spaces (or a combination of both) for
indenting description sections and contents.
Concretely, something like the following would now be supported:
/*
...
*int bpf_helper(list of arguments)
*......Description
*.> > Start of description...
*> > Another line of description
*..............And yet another line of description
*> Return
*.> ........0 on success, or a negative error in case of failure
...
*/
While at it, remove unnecessary carets from each regex used with match()
in the script. They are redundant, as match() tries to match from the
beginning of the string by default.
v2: Remove unnecessary caret when a regex is used with match().
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
UAPI Changes:
- Add support for a generic plane alpha property to sun4i, rcar-du and atmel-hclcdc. (Maxime)
Core Changes:
- Stop looking at legacy plane->fb and crtc members in atomic drivers. (Ville)
- mode_valid return type fixes. (Luc)
- Handle zpos normalization in the core. (Peter)
Driver Changes:
- Implement CTM, plane alpha and generic async cursor support in vc4. (Stefan)
- Various fixes for HPD and aux chan in drm_bridge/analogix_dp. (Lin, Zain, Douglas)
- Add support for MIPI DSI to sun4i. (Maxime)
-----BEGIN PGP SIGNATURE-----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=9LYY
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2018-04-26' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v4.18:
UAPI Changes:
- Add support for a generic plane alpha property to sun4i, rcar-du and atmel-hclcdc. (Maxime)
Core Changes:
- Stop looking at legacy plane->fb and crtc members in atomic drivers. (Ville)
- mode_valid return type fixes. (Luc)
- Handle zpos normalization in the core. (Peter)
Driver Changes:
- Implement CTM, plane alpha and generic async cursor support in vc4. (Stefan)
- Various fixes for HPD and aux chan in drm_bridge/analogix_dp. (Lin, Zain, Douglas)
- Add support for MIPI DSI to sun4i. (Maxime)
Signed-off-by: Dave Airlie <airlied@redhat.com>
# gpg: Signature made Thu 26 Apr 2018 08:21:01 PM AEST
# gpg: using RSA key FE558C72A67013C3
# gpg: Can't check signature: public key not found
Link: https://patchwork.freedesktop.org/patch/msgid/b33da7eb-efc9-ae6f-6f69-b7acd6df6797@mblankhorst.nl
The SPDX-License-Identifiers are growing in the kernel and so grow
expression failures and license IDs are used which have no corresponding
license text file in the LICENSES directory.
Add a script which gathers information from the LICENSES directory,
i.e. the various tags in the licenses and exception files and then scans
either input from stdin, which it treats as a single file or if started
without arguments it scans the full kernel tree.
It checks whether the license expression syntax is correct and also
validates whether the license identifiers used in the expressions are
available in the LICENSES files.
scripts/spdxcheck.py -h
usage: spdxcheck.py [-h] [-m MAXLINES] [-v] [path [path ...]]
SPDX expression checker
positional arguments:
path Check path or file. If not given full git tree scan.
For stdin use "-"
optional arguments:
-h, --help show this help message and exit
-m MAXLINES, --maxlines MAXLINES
Maximum number of lines to scan in a file. Default 15
-v, --verbose Verbose statistics output
include/dt-bindings/reset/amlogic,meson-axg-reset.h: 9:41 Invalid License ID: BSD
drivers/pinctrl/sh-pfc/pfc-r8a77965.c: 1:28 Invalid License ID: GPL-2.
include/dt-bindings/reset/amlogic,meson-axg-reset.h: 9:41 Invalid License ID: BSD
arch/x86/kernel/jailhouse.c: 1:28 Invalid License ID: GPL2.0
include/dt-bindings/reset/amlogic,meson-axg-reset.h: 9:41 Invalid License ID: BSD
arch/arm/mach-s3c24xx/h1940-bluetooth.c: 1:28 Invalid License ID: GPL-1.0
arch/x86/kernel/jailhouse.c: 1:28 Invalid License ID: GPL2.0
drivers/pinctrl/sh-pfc/pfc-r8a77965.c: 1:28 Invalid License ID: GPL-2.
include/dt-bindings/reset/amlogic,meson-axg-reset.h: 9:41 Invalid License ID: BSD
arch/x86/include/asm/jailhouse_para.h: 1:28 Invalid License ID: GPL2.0
arch/arm/mach-s3c24xx/h1940-bluetooth.c: 1:28 Invalid License ID: GPL-1.0
arch/x86/kernel/jailhouse.c: 1:28 Invalid License ID: GPL2.0
drivers/pinctrl/sh-pfc/pfc-r8a77965.c: 1:28 Invalid License ID: GPL-2.
include/dt-bindings/reset/amlogic,meson-axg-reset.h: 9:41 Invalid License ID: BSD
arch/x86/include/asm/jailhouse_para.h: 1:28 Invalid License ID: GPL2.0
License files: 14
Exception files: 1
License IDs 19
Exception IDs 1
Files checked: 61332
Lines checked: 669181
Files with SPDX: 16169
Files with errors: 5
real 0m2.642s
user 0m2.231s
sys 0m0.467s
That's a full tree sweep on my laptop. Note, this runs single threaded.
It scans by default the first 15 lines for a SPDX identifier where the
current max inside a top comment is at line 10. But that's going to be
faster once the identifiers are all in the first two lines as documented.
The python wizards will surely know how to do that smarter and faster, but
its at least better than no tool at all.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[jc: Fixed ironically erroneous SPDX tag and did chmod +x ]
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Remove previous "overview" of eBPF helpers from user bpf.h header.
Replace it by a comment explaining how to process the new documentation
(to come in following patches) with a Python script to produce RST, then
man page documentation.
Also add the aforementioned Python script under scripts/. It is used to
process include/uapi/linux/bpf.h and to extract helper descriptions, to
turn it into a RST document that can further be processed with rst2man
to produce a man page. The script takes one "--filename <path/to/file>"
option. If the script is launched from scripts/ in the kernel root
directory, it should be able to find the location of the header to
parse, and "--filename <path/to/file>" is then optional. If it cannot
find the file, then the option becomes mandatory. RST-formatted
documentation is printed to standard output.
Typical workflow for producing the final man page would be:
$ ./scripts/bpf_helpers_doc.py \
--filename include/uapi/linux/bpf.h > /tmp/bpf-helpers.rst
$ rst2man /tmp/bpf-helpers.rst > /tmp/bpf-helpers.7
$ man /tmp/bpf-helpers.7
Note that the tool kernel-doc cannot be used to document eBPF helpers,
whose signatures are not available directly in the header files
(pre-processor directives are used to produce them at the beginning of
the compilation process).
v4:
- Also remove overviews for newly added bpf_xdp_adjust_tail() and
bpf_skb_get_xfrm_state().
- Remove vague statement about what helpers are restricted to GPL
programs in "LICENSE" section for man page footer.
- Replace license boilerplate with SPDX tag for Python script.
v3:
- Change license for man page.
- Remove "for safety reasons" from man page header text.
- Change "packets metadata" to "packets" in man page header text.
- Move and fix comment on helpers introducing no overhead.
- Remove "NOTES" section from man page footer.
- Add "LICENSE" section to man page footer.
- Edit description of file include/uapi/linux/bpf.h in man page footer.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cherry-picked from dtc upstream commit e1f139ea4900fd0324c646822b4061fec6e08321.
Having a 'bus-range' property for PCI bridges should not be required,
so remove the warning when missing. There was some confusion with the
Linux kernel printing a message that no property is present and the OS
assigned the bus number. This message was intended to be informational
rather than a warning.
When the firmware doesn't enumerate the PCI bus and leaves it up to the
OS to do, then it is perfectly fine for the OS to assign bus numbers
and bus-range is not necessary.
There are a few cases where bus-range is needed or useful as Arnd
Bergmann summarized:
- Traditionally Linux avoided using multiple PCI domains, but instead
configured separate PCI host bridges to have non-overlapping
bus ranges so we can present them to user space as a single
domain, and run the kernel without CONFIG_PCI_DOMAINS.
Specifying the bus ranges this way would and give stable bus
numbers across boots when the probe order is not fixed.
- On certain ARM64 systems, we must only use the first
128 bus numbers based on the way the IOMMU identifies
the device with truncated bus/dev/fn number. There are probably
others like this, with various limitations.
- To leave some room for hotplugged devices, each slot on
a host bridge can in theory get a range of bus numbers
that are available when assigning bus numbers at boot time
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
- pass HOSTLDFLAGS when compiling single .c host programs
- build genksyms lexer and parser files instead of using shipped
versions
- rename *-asn1.[ch] to *.asn1.[ch] for suffix consistency
- let the top .gitignore globally ignore artifacts generated by
flex, bison, and asn1_compiler
- let the top Makefile globally clean artifacts generated by
flex, bison, and asn1_compiler
- use safer .SECONDARY marker instead of .PRECIOUS to prevent
intermediate files from being removed
- support -fmacro-prefix-map option to make __FILE__ a relative path
- fix # escaping to prepare for the future GNU Make release
- clean up deb-pkg by using debian tools instead of handrolled
source/changes generation
- improve rpm-pkg portability by supporting kernel-install as a
fallback of new-kernel-pkg
- extend Kconfig listnewconfig target to provide more information
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=tD6R
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- pass HOSTLDFLAGS when compiling single .c host programs
- build genksyms lexer and parser files instead of using shipped
versions
- rename *-asn1.[ch] to *.asn1.[ch] for suffix consistency
- let the top .gitignore globally ignore artifacts generated by flex,
bison, and asn1_compiler
- let the top Makefile globally clean artifacts generated by flex,
bison, and asn1_compiler
- use safer .SECONDARY marker instead of .PRECIOUS to prevent
intermediate files from being removed
- support -fmacro-prefix-map option to make __FILE__ a relative path
- fix # escaping to prepare for the future GNU Make release
- clean up deb-pkg by using debian tools instead of handrolled
source/changes generation
- improve rpm-pkg portability by supporting kernel-install as a
fallback of new-kernel-pkg
- extend Kconfig listnewconfig target to provide more information
* tag 'kbuild-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: extend output of 'listnewconfig'
kbuild: rpm-pkg: use kernel-install as a fallback for new-kernel-pkg
Kbuild: fix # escaping in .cmd files for future Make
kbuild: deb-pkg: split generating packaging and build
kbuild: use -fmacro-prefix-map to make __FILE__ a relative path
kbuild: mark $(targets) as .SECONDARY and remove .PRECIOUS markers
kbuild: rename *-asn1.[ch] to *.asn1.[ch]
kbuild: clean up *-asn1.[ch] patterns from top-level Makefile
.gitignore: move *-asn1.[ch] patterns to the top-level .gitignore
kbuild: add %.dtb.S and %.dtb to 'targets' automatically
kbuild: add %.lex.c and %.tab.[ch] to 'targets' automatically
genksyms: generate lexer and parser during build instead of shipping
kbuild: clean up *.lex.c and *.tab.[ch] patterns from top-level Makefile
.gitignore: move *.lex.c *.tab.[ch] patterns to the top-level .gitignore
kbuild: use HOSTLDFLAGS for single .c executables
Pull x86 fixes from Thomas Gleixner:
"A set of fixes and updates for x86:
- Address a swiotlb regression which was caused by the recent DMA
rework and made driver fail because dma_direct_supported() returned
false
- Fix a signedness bug in the APIC ID validation which caused invalid
APIC IDs to be detected as valid thereby bloating the CPU possible
space.
- Fix inconsisten config dependcy/select magic for the MFD_CS5535
driver.
- Fix a corruption of the physical address space bits when encryption
has reduced the address space and late cpuinfo updates overwrite
the reduced bit information with the original value.
- Dominiks syscall rework which consolidates the architecture
specific syscall functions so all syscalls can be wrapped with the
same macros. This allows to switch x86/64 to struct pt_regs based
syscalls. Extend the clearing of user space controlled registers in
the entry patch to the lower registers"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic: Fix signedness bug in APIC ID validity checks
x86/cpu: Prevent cpuinfo_x86::x86_phys_bits adjustment corruption
x86/olpc: Fix inconsistent MFD_CS5535 configuration
swiotlb: Use dma_direct_supported() for swiotlb_ops
syscalls/x86: Adapt syscall_wrapper.h to the new syscall stub naming convention
syscalls/core, syscalls/x86: Rename struct pt_regs-based sys_*() to __x64_sys_*()
syscalls/core, syscalls/x86: Clean up compat syscall stub naming convention
syscalls/core, syscalls/x86: Clean up syscall stub naming convention
syscalls/x86: Extend register clearing on syscall entry to lower registers
syscalls/x86: Unconditionally enable 'struct pt_regs' based syscalls on x86_64
syscalls/x86: Use 'struct pt_regs' based syscall calling for IA32_EMULATION and x32
syscalls/core: Prepare CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y for compat syscalls
syscalls/x86: Use 'struct pt_regs' based syscall calling convention for 64-bit syscalls
syscalls/core: Introduce CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
x86/syscalls: Don't pointlessly reload the system call number
x86/mm: Fix documentation of module mapping range with 4-level paging
x86/cpuid: Switch to 'static const' specifier
We at Red Hat/Fedora have generally tried to have a per file breakdown of
every config option we set. This makes it easy for us to add new options
when they are exposed and keep a changelog of why they were set.
A Fedora example is here:
https://src.fedoraproject.org/cgit/rpms/kernel.git/tree/configs/fedora/generic
Using various merge scripts, we build up a config file and run it through
'make listnewconfig' and 'make oldnoconfig'. The idea is to print out new
config options that haven't been manually set and use the default until
a patch is posted to set it properly.
To speed things up, it would be nice to make it easier to generate a
patch to post the default setting. The output of 'make listnewconfig'
has two issues that limit us:
- it doesn't provide the default value
- it doesn't provide the new 'choice' options that get flagged in
'oldconfig'
This patch extends 'listnewconfig' to address the above two issues.
This allows us to run a script
make listnewconfig | rhconfig-tool -o patches; git send-email patches/
The output of 'make listnewconfig':
CONFIG_NET_EMATCH_IPT
CONFIG_IPVLAN
CONFIG_ICE
CONFIG_NET_VENDOR_NI
CONFIG_IEEE802154_MCR20A
CONFIG_IR_IMON_DECODER
CONFIG_IR_IMON_RAW
The new output of 'make listnewconfig':
CONFIG_KERNEL_XZ=n
CONFIG_KERNEL_LZO=n
CONFIG_NET_EMATCH_IPT=n
CONFIG_IPVLAN=n
CONFIG_ICE=n
CONFIG_NET_VENDOR_NI=y
CONFIG_IEEE802154_MCR20A=n
CONFIG_IR_IMON_DECODER=n
CONFIG_IR_IMON_RAW=n
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The new-kernel-pkg script is only present when grubby is installed, but it
may not always be the case. So if the script isn't present, attempt to use
the kernel-install script as a fallback instead.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
I have one regression fix for a minor build problem after the architecture
removal series, plus a rework of the barriers in the readl/writel
functions, thanks to work by Sinan Kaya:
This started from a discussion on the linuxpcc and rdma mailing lists
[1]. To summarize, we decided that architectures are responsible to
serialize readl() and writel() accesses on a device MMIO space relative
to DMA performed by that device.
This series provides a pessimistic implementation of that behavior for
asm-generic/io.h, which is in turn used by a number of architectures
(h8300, microblaze, nios2, openrisc, s390, sparc, um, unicore32, and
xtensa). Some of those presumably need no extra barriers, or something
weaker than rmb()/wmb(), and they are advised to override the new default
for better performance.
For inb()/outb(), the same barriers are used, but architectures might
want to add another barrier to outb() here if that can guarantee
non-posted behavior (some architectures can, others cannot do that).
The readl_relaxed()/writel_relaxed() family of functions retains the
existing behavior with no extra barriers.
[1]: https://lists.ozlabs.org/pipermail/linuxppc-dev/2018-March/170481.html
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=oBQh
-----END PGP SIGNATURE-----
Merge tag 'asm-generic' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic fixes from Arnd Bergmann:
"I have one regression fix for a minor build problem after the
architecture removal series, plus a rework of the barriers in the
readl/writel functions, thanks to work by Sinan Kaya:
This started from a discussion on the linuxpcc and rdma mailing
lists[1]. To summarize, we decided that architectures are responsible
to serialize readl() and writel() accesses on a device MMIO space
relative to DMA performed by that device.
This series provides a pessimistic implementation of that behavior for
asm-generic/io.h, which is in turn used by a number of architectures
(h8300, microblaze, nios2, openrisc, s390, sparc, um, unicore32, and
xtensa). Some of those presumably need no extra barriers, or something
weaker than rmb()/wmb(), and they are advised to override the new
default for better performance.
For inb()/outb(), the same barriers are used, but architectures might
want to add another barrier to outb() here if that can guarantee
non-posted behavior (some architectures can, others cannot do that).
The readl_relaxed()/writel_relaxed() family of functions retains the
existing behavior with no extra barriers"
[1] https://lists.ozlabs.org/pipermail/linuxppc-dev/2018-March/170481.html
* tag 'asm-generic' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
io: change writeX_relaxed() to remove barriers
io: change readX_relaxed() to remove barriers
dts: remove cris & metag dts hard link file
io: change inX() to have their own IO barrier overrides
io: change outX() to have their own IO barrier overrides
io: define stronger ordering for the default writeX() implementation
io: define stronger ordering for the default readX() implementation
io: define several IO & PIO barrier types for the asm-generic version
Using bool in a bitfield isn't a good idea as the alignment behavior is
arch implementation defined.
Suggest using unsigned int or u<8|16|32> instead.
Link: http://lkml.kernel.org/r/e22fb871b1b7f2fda4b22f3a24e0d7f092eb612c.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Allow a space between a colon and subsequent opening bracket. This
sequence may occur in inline assembler statements like
asm(
"ldr %[out], [%[in]]\n\t"
: [out] "=r" (ret)
: [in] "r" (addr)
);
Link: http://lkml.kernel.org/r/20180403191655.23700-1-xypron.glpk@gmx.de
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kernel style seems to prefer line wrapping an assignment with the
assignment operator on the previous line like:
<leading tabs> identifier =
expression;
over
<leading tabs> identifier
= expression;
somewhere around a 50:1 ratio
$ git grep -P "[^=]=\s*$" -- "*.[ch]" | wc -l
52008
$ git grep -P "^\s+[\*\/\+\|\%\-]?=[^=>]" | wc -l
1161
So add a --strict test for that condition.
Link: http://lkml.kernel.org/r/1522275726.2210.12.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are occasions where symbolic perms are used in a ternary like
return (channel == 0) ? S_IRUGO | S_IWUSR : S_IRUGO;
The current test will find the first use "S_IRUGO | S_IWUSR" but not the
second use "S_IRUGO" on the same line.
Improve the test to look for all instances on a line.
Link: http://lkml.kernel.org/r/1522127944.12357.49.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The get_quoted_string function does not expect invalid arguments.
The $stat test can return non-statements for complicated macros like
TRACE_EVENT.
Allow the $stat block and test for vsprintf misuses to exceed the actual
block length and possibly test invalid lines by validating the arguments
of get_quoted_string.
Return "" if either get_quoted_string argument is undefined.
Miscellanea:
o Properly align the comment for the vsprintf extension test
Link: http://lkml.kernel.org/r/9e9725342ca3dfc0f5e3e0b8ca3c482b0e5712cc.1520356392.git.joe@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Usage of the new %px specifier potentially leaks sensitive information.
Printing kernel addresses exposes the kernel layout in memory, this is
potentially exploitable. We have tools in the kernel to help us do the
right thing. We can have checkpatch warn developers of potential
dangers of using %px.
Have checkpatch emit a warning for usage of specifier %px.
Link: http://lkml.kernel.org/r/1519700648-23108-5-git-send-email-me@tobin.cc
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
checkpatch currently contains duplicate code. We can define a sub
routine and call that instead. This reduces code duplication and line
count.
Add subroutine get_stat_here().
Link: http://lkml.kernel.org/r/1519700648-23108-4-git-send-email-me@tobin.cc
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Variables are declared and not used, we should remove them.
Link: http://lkml.kernel.org/r/1519700648-23108-3-git-send-email-me@tobin.cc
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
checkpatch currently contains duplicate code. We can define a sub
routine and call that instead. This reduces code duplication and line
count.
Add subroutine get_stat_real()
Link: http://lkml.kernel.org/r/1519700648-23108-2-git-send-email-me@tobin.cc
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add the crypto API *_ON_STACK to $declaration_macros.
Resolves the following false warning:
WARNING: Missing a blank line after declarations
+ int err;
+ SHASH_DESC_ON_STACK(desc, ctx_p->shash_tfm);
Link: http://lkml.kernel.org/r/1518941636-4484-1-git-send-email-gilad@benyossef.com
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add SPDX license tag check based on the rules defined in
Documentation/process/license-rules.rst. To summarize, SPDX license
tags should be on the 1st line (or 2nd line in scripts) using the
appropriate comment style for the file type.
Link: http://lkml.kernel.org/r/20180202154026.15298-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Joe Perches <joe@perches.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Igor Stoppa <igor.stoppa@huawei.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bare email addresses with non alphanumeric characters require escape
quoting before being substituted in the parse_email routine.
e.g. Reported-by: syzbot+bbd8e9a06452cc48059b@syzkaller.appspotmail.com
Do so.
Link: http://lkml.kernel.org/r/1518631805.3678.12.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I tried building using a freshly built Make (4.2.1-69-g8a731d1), but
already the objtool build broke with
orc_dump.c: In function ‘orc_dump’:
orc_dump.c:106:2: error: ‘elf_getshnum’ is deprecated [-Werror=deprecated-declarations]
if (elf_getshdrnum(elf, &nr_sections)) {
Turns out that with that new Make, the backslash was not removed, so cpp
didn't see a #include directive, grep found nothing, and
-DLIBELF_USE_DEPRECATED was wrongly put in CFLAGS.
Now, that new Make behaviour is documented in their NEWS file:
* WARNING: Backward-incompatibility!
Number signs (#) appearing inside a macro reference or function invocation
no longer introduce comments and should not be escaped with backslashes:
thus a call such as:
foo := $(shell echo '#')
is legal. Previously the number sign needed to be escaped, for example:
foo := $(shell echo '\#')
Now this latter will resolve to "\#". If you want to write makefiles
portable to both versions, assign the number sign to a variable:
C := \#
foo := $(shell echo '$C')
This was claimed to be fixed in 3.81, but wasn't, for some reason.
To detect this change search for 'nocomment' in the .FEATURES variable.
This also fixes up the two make-cmd instances to replace # with $(pound)
rather than with \#. There might very well be other places that need
similar fixup in preparation for whatever future Make release contains
the above change, but at least this builds an x86_64 defconfig with the
new make.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=197847
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tidy the naming convention for compat syscall subs. Hints which describe
the purpose of the stub go in front and receive a double underscore to
denote that they are generated on-the-fly by the COMPAT_SYSCALL_DEFINEx()
macro.
For the generic case, this means:
t kernel_waitid # common C function (see kernel/exit.c)
__do_compat_sys_waitid # inlined helper doing the actual work
# (takes original parameters as declared)
T __se_compat_sys_waitid # sign-extending C function calling inlined
# helper (takes parameters of type long,
# casts them to unsigned long and then to
# the declared type)
T compat_sys_waitid # alias to __se_compat_sys_waitid()
# (taking parameters as declared), to
# be included in syscall table
For x86, the naming is as follows:
t kernel_waitid # common C function (see kernel/exit.c)
__do_compat_sys_waitid # inlined helper doing the actual work
# (takes original parameters as declared)
t __se_compat_sys_waitid # sign-extending C function calling inlined
# helper (takes parameters of type long,
# casts them to unsigned long and then to
# the declared type)
T __ia32_compat_sys_waitid # IA32_EMULATION 32-bit-ptregs -> C stub,
# calls __se_compat_sys_waitid(); to be
# included in syscall table
T __x32_compat_sys_waitid # x32 64-bit-ptregs -> C stub, calls
# __se_compat_sys_waitid(); to be included
# in syscall table
If only one of IA32_EMULATION and x32 is enabled, __se_compat_sys_waitid()
may be inlined into the stub __{ia32,x32}_compat_sys_waitid().
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180409105145.5364-3-linux@dominikbrodowski.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tidy the naming convention for compat syscall subs. Hints which describe
the purpose of the stub go in front and receive a double underscore to
denote that they are generated on-the-fly by the SYSCALL_DEFINEx() macro.
For the generic case, this means (0xffffffff prefix removed):
810f08d0 t kernel_waitid # common C function (see kernel/exit.c)
<inline> __do_sys_waitid # inlined helper doing the actual work
# (takes original parameters as declared)
810f1aa0 T __se_sys_waitid # sign-extending C function calling inlined
# helper (takes parameters of type long;
# casts them to the declared type)
810f1aa0 T sys_waitid # alias to __se_sys_waitid() (taking
# parameters as declared), to be included
# in syscall table
For x86, the naming is as follows:
810efc70 t kernel_waitid # common C function (see kernel/exit.c)
<inline> __do_sys_waitid # inlined helper doing the actual work
# (takes original parameters as declared)
810efd60 t __se_sys_waitid # sign-extending C function calling inlined
# helper (takes parameters of type long;
# casts them to the declared type)
810f1140 T __ia32_sys_waitid # IA32_EMULATION 32-bit-ptregs -> C stub,
# calls __se_sys_waitid(); to be included
# in syscall table
810f1110 T sys_waitid # x86 64-bit-ptregs -> C stub, calls
# __se_sys_waitid(); to be included in
# syscall table
For x86, sys_waitid() will be re-named to __x64_sys_waitid in a follow-up
patch.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180409105145.5364-2-linux@dominikbrodowski.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Here is the patch set for the 4.17-rc1 merge window. This set
represents improvements to the scripts/leaking_addresses.pl script. The
major improvement is that with this set applied the script actually runs
in a reasonable amount of time (less than a minute on a standard stock
Ubuntu user desktop). Also, we have a second maintainer now and a tree
hosted on kernel.org
We do a few code clean ups. We fix the command help output. Handling
of the vsyscall address range is fixed to check the whole range instead
of just the start/end addresses. We add support for 5 page table levels
(suggested on LKML). We use a system command to get the machine
architecture instead of using Perl. Calling this command for every
regex comparison is what previously choked the script, caching the
result of this call gave the major speed improvement. We add support
for scanning 32-bit kernels using the user/kernel memory split. Path
skipping code refactored and simplified (meaning easier script
configuration). We remove version numbering. We add a variable name to
improve readability of a regex and finally we check filenames for
leaking addresses.
Currently script scans /proc/PID for all PID. With this set applied we
only scan for PID==1. It was observed that on an idle system files under
/proc/PID are predominantly the same for all processes. Also it was
noted that the script does not scan _all_ the kernel since it only scans
active processes. Scanning only for PID==1 makes explicit the inherent
flaw in the script that the scan is only partial and also speeds things up.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
-----BEGIN PGP SIGNATURE-----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=9BLH
-----END PGP SIGNATURE-----
Merge tag 'leaks-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tobin/leaks
Pull leaking-addresses updates from Tobin Harding:
"This set represents improvements to the scripts/leaking_addresses.pl
script.
The major improvement is that with this set applied the script
actually runs in a reasonable amount of time (less than a minute on a
standard stock Ubuntu user desktop). Also, we have a second maintainer
now and a tree hosted on kernel.org
We do a few code clean ups. We fix the command help output. Handling
of the vsyscall address range is fixed to check the whole range
instead of just the start/end addresses. We add support for 5 page
table levels (suggested on LKML). We use a system command to get the
machine architecture instead of using Perl. Calling this command for
every regex comparison is what previously choked the script, caching
the result of this call gave the major speed improvement. We add
support for scanning 32-bit kernels using the user/kernel memory
split. Path skipping code refactored and simplified (meaning easier
script configuration). We remove version numbering. We add a variable
name to improve readability of a regex and finally we check filenames
for leaking addresses.
Currently script scans /proc/PID for all PID. With this set applied we
only scan for PID==1. It was observed that on an idle system files
under /proc/PID are predominantly the same for all processes. Also it
was noted that the script does not scan _all_ the kernel since it only
scans active processes. Scanning only for PID==1 makes explicit the
inherent flaw in the script that the scan is only partial and also
speeds things up"
* tag 'leaks-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tobin/leaks:
MAINTAINERS: Update LEAKING_ADDRESSES
leaking_addresses: check if file name contains address
leaking_addresses: explicitly name variable used in regex
leaking_addresses: remove version number
leaking_addresses: skip '/proc/1/syscall'
leaking_addresses: skip all /proc/PID except /proc/1
leaking_addresses: cache architecture name
leaking_addresses: simplify path skipping
leaking_addresses: do not parse binary files
leaking_addresses: add 32-bit support
leaking_addresses: add is_arch() wrapper subroutine
leaking_addresses: use system command to get arch
leaking_addresses: add support for 5 page table levels
leaking_addresses: add support for kernel config file
leaking_addresses: add range check for vsyscall memory
leaking_addresses: indent dependant options
leaking_addresses: remove command examples
leaking_addresses: remove mention of kptr_restrict
leaking_addresses: fix typo function not called
Pull general security layer updates from James Morris:
- Convert security hooks from list to hlist, a nice cleanup, saving
about 50% of space, from Sargun Dhillon.
- Only pass the cred, not the secid, to kill_pid_info_as_cred and
security_task_kill (as the secid can be determined from the cred),
from Stephen Smalley.
- Close a potential race in kernel_read_file(), by making the file
unwritable before calling the LSM check (vs after), from Kees Cook.
* 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
security: convert security hooks to use hlist
exec: Set file unwritable before LSM check
usb, signal, security: only pass the cred, not the secid, to kill_pid_info_as_cred and security_task_kill
Move debian/ directory generation out of builddeb to a new script,
mkdebian. The package build commands are kept in builddeb, which
is now an internal command called from debian/rules.
With these changes in place, we can now use dpkg-buildpackage from
deb-pkg and bindeb-pkg removing need for handrolled source/changes
generation.
This patch is based on the criticism of the current state of builddeb
discussed on:
https://patchwork.kernel.org/patch/9656403/
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
GNU Make automatically deletes intermediate files that are updated
in a chain of pattern rules.
Example 1) %.dtb.o <- %.dtb.S <- %.dtb <- %.dts
Example 2) %.o <- %.c <- %.c_shipped
A couple of makefiles mark such targets as .PRECIOUS to prevent Make
from deleting them, but the correct way is to use .SECONDARY.
.SECONDARY
Prerequisites of this special target are treated as intermediate
files but are never automatically deleted.
.PRECIOUS
When make is interrupted during execution, it may delete the target
file it is updating if the file was modified since make started.
If you mark the file as precious, make will never delete the file
if interrupted.
Both can avoid deletion of intermediate files, but the difference is
the behavior when Make is interrupted; .SECONDARY deletes the target,
but .PRECIOUS does not.
The use of .PRECIOUS is relatively rare since we do not want to keep
partially constructed (possibly corrupted) targets.
Another difference is that .PRECIOUS works with pattern rules whereas
.SECONDARY does not.
.PRECIOUS: $(obj)/%.lex.c
works, but
.SECONDARY: $(obj)/%.lex.c
has no effect. However, for the reason above, I do not want to use
.PRECIOUS which could cause obscure build breakage.
The targets specified as .SECONDARY must be explicit. $(targets)
contains all targets that need to include .*.cmd files. So, the
intermediates you want to keep are mostly in there. Therefore, mark
$(targets) as .SECONDARY. It means primary targets are also marked
as .SECONDARY, but I do not see any drawback for this.
I replaced some .SECONDARY / .PRECIOUS markers with 'targets'. This
will make Kbuild search for non-existing .*.cmd files, but this is
not a noticeable performance issue.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Frank Rowand <frowand.list@gmail.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Our convention is to distinguish file types by suffixes with a period
as a separator.
*-asn1.[ch] is a different pattern from other generated sources such
as *.lex.c, *.tab.[ch], *.dtb.S, etc. More confusing, files with
'-asn1.[ch]' are generated files, but '_asn1.[ch]' are checked-in
files:
net/netfilter/nf_conntrack_h323_asn1.c
include/linux/netfilter/nf_conntrack_h323_asn1.h
include/linux/sunrpc/gss_asn1.h
Rename generated files to *.asn1.[ch] for consistency.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Another common pattern that consists of chained commands is to compile
a DTB as binary data into the kernel image or a module. It is used in
several places in the source tree. Support it in the core Makefile.
$(call if_changed,dt_S_dtb) is more suitable than $(call cmd,dt_S_dtb)
in case cmd_dt_S_dtb is changed in the future.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Frank Rowand <frowand.list@gmail.com>
Files generated by if_changed* must be added to 'targets' to include
*.cmd files. Otherwise, they would be regenerated every time.
The build system automatically adds objects to 'targets' where
appropriate, such as obj-y, extra-y, etc. but does nothing for
intermediate files. So, each Makefile needs to add them by itself.
There are some common cases where objects are generated by chained
rules. Lexers and parsers are compiled like follows:
%.lex.o <- %.lex.c <- %.l
%.tab.o <- %.tab.c <- %.y
They are common patterns, so it is reasonable to take care of them
in the core Makefile instead of requiring each Makefile to do so.
At this moment, you cannot delete 'target += zconf.lex.c' in the
Kconfig Makefile because zconf.lex.c is included from zconf.tab.c
instead of being compiled separately. It should be deleted after
Kconfig is more refactored.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Frank Rowand <frowand.list@gmail.com>
Now that the kernel build supports flex and bison, remove the _shipped
files and generate them during the build instead.
There are no more shipped lexer and parser, so I ripped off the rules
in scripts/Malefile.lib that were used for REGENERATE_PARSERS.
The genksyms parser has ambiguous grammar, which would emit warnings:
scripts/genksyms/parse.y: warning: 9 shift/reduce conflicts [-Wconflicts-sr]
scripts/genksyms/parse.y: warning: 5 reduce/reduce conflicts [-Wconflicts-rr]
They are normally suppressed, but displayed when W=1 is given.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Files suffixed by .lex.c, .tab.[ch] are generated lexers, parsers,
respectively. Clean them up globally from the top Makefile.
Some of the final host programs those lexer/parser are linked into
are necessary for building external modules, but the intermediates
are unneeded. They can be cleaned away by 'make clean' instead of
'make mrproper'.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Frank Rowand <frowand.list@gmail.com>
These patterns are common to host programs that require lexer and parser.
Move them to the top .gitignore.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Frank Rowand <frowand.list@gmail.com>
When compiling executables from a single .c file, the linker is also
invoked. Pass the HOSTLDFLAGS like for other linker commands.
Signed-off-by: Robin Jarry <robin.jarry@6wind.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Sometimes files may be created by using output from printk. As the scan
traverses the directory tree we should parse each path name and check if
it is leaking an address.
Add check for leaking address on each path name.
Suggested-by: Tycho Andersen <tycho@tycho.ws>
Acked-by: Tycho Andersen <tycho@tycho.ws>
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Currently sub routine may_leak_address() is checking regex against Perl
special variable $_ which is _fortunately_ being set correctly in a loop
before this sub routine is called. We already have declared a variable
to hold this value '$line' we should use it.
Use $line in regex match instead of implicit $_
Signed-off-by: Tobin C. Harding <me@tobin.cc>
We have git now, we don't need a version number. This was originally
added because leaking_addresses.pl shamelessly (and mindlessly) copied
checkpatch.pl
Remove version number from script.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
The pointers listed in /proc/1/syscall are user pointers, and negative
syscall args will show up like kernel addresses.
For example
/proc/31808/syscall: 0 0x3 0x55b107a38180 0x2000 0xffffffffffffffb0 \
0x55b107a302d0 0x55b107a38180 0x7fffa313b8e8 0x7ff098560d11
Skip parsing /proc/1/syscall
Suggested-by: Tycho Andersen <tycho@tycho.ws>
Signed-off-by: Tobin C. Harding <me@tobin.cc>
When the system is idle it is likely that most files under /proc/PID
will be identical for various processes. Scanning _all_ the PIDs under
/proc is unnecessary and implies that we are thoroughly scanning /proc.
This is _not_ the case because there may be ways userspace can trigger
creation of /proc files that leak addresses but were not present during
a scan. For these two reasons we should exclude all PID directories
under /proc except '1/'
Exclude all /proc/PID except /proc/1.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Currently we are repeatedly calling `uname -m`. This is causing the
script to take a long time to run (more than 10 seconds to parse
/proc/kallsyms). We can use Perl state variables to cache the result of
the first call to `uname -m`. With this change in place the script
scans the whole kernel in under a minute.
Cache machine architecture in state variable.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Currently script has multiple configuration arrays. This is confusing,
evident by the fact that a bunch of the entries are in the wrong place.
We can simplify the code by just having a single array for absolute
paths to skip and a single array for file names to skip wherever they
appear in the scanned directory tree. There are also currently multiple
subroutines to handle the different arrays, we can reduce these to a
single subroutine also.
Simplify the path skipping code.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Currently script parses binary files. Since we are scanning for
readable kernel addresses there is no need to parse binary files. We
can use Perl to check if file is binary and skip parsing it if so.
Do not parse binary files.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Currently script only supports x86_64 and ppc64. It would be nice to be
able to scan 32-bit machines also. We can add support for 32-bit
architectures by modifying how we check for false positives, taking
advantage of the page offset used by the kernel, and using the correct
regular expression.
Support for 32-bit machines is enabled by the observation that the kernel
addresses on 32-bit machines are larger [in value] than the page offset.
We can use this to filter false positives when scanning the kernel for
leaking addresses.
Programmatic determination of the running architecture is not
immediately obvious (current 32-bit machines return various strings from
`uname -m`). We therefore provide a flag to enable scanning of 32-bit
kernels. Also we can check the kernel config file for the offset and if
not found default to 0xc0000000. A command line option to parse in the
page offset is also provided. We do automatically detect architecture
if running on ix86.
Add support for 32-bit kernels. Add a command line option for page
offset.
Suggested-by: Kaiwan N Billimoria <kaiwan.billimoria@gmail.com>
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Currently there is duplicate code when checking the architecture type.
We can remove the duplication by implementing a wrapper function
is_arch().
Implement and use wrapper function is_arch().
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Currently script uses Perl to get the machine architecture. This can be
erroneous since Perl uses the architecture of the machine that Perl was
compiled on not the architecture of the running machine. We should use
the systems `uname` command instead.
Use `uname -m` instead of Perl to get the machine architecture.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Currently script only supports 4 page table levels because of the way
the kernel address regular expression is crafted. We can do better than
this. Using previously added support for kernel configuration options we
can get the number of page table levels defined by
CONFIG_PGTABLE_LEVELS. Using this value a correct regular expression can
be crafted. This only supports 5 page tables on x86_64.
Add support for 5 page table levels on x86_64.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Features that rely on the ability to get kernel configuration options
are ready to be implemented in script. In preparation for this we can
add support for kernel config options as a separate patch to ease
review.
Add support for locating and parsing kernel configuration file.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Currently script checks only first and last address in the vsyscall
memory range. We can do better than this. When checking for false
positives against $match, we can convert $match to a hexadecimal value
then check if it lies within the range of vsyscall addresses.
Check whole range of vsyscall addresses when checking for false
positive.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
A number of the command line options to script are dependant on the
option --input-raw being set. If we indent these options it makes
explicit this dependency.
Indent options dependant on --input-raw.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Currently help output includes command examples. These were cute when we
first started development of this script but are unnecessary.
Remove command examples.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
leaking_addresses.pl can be run with kptr_restrict==0 now, we don't need
the comment about setting kptr_restrict any more.
Remove comment suggesting setting kptr_restrict.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Currently code uses a check against an undefined variable because the
variable is a sub routine name and is not evaluated.
Evaluate subroutine; add parenthesis to sub routine name.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Merge updates from Andrew Morton:
- a few misc things
- ocfs2 updates
- the v9fs maintainers have been missing for a long time. I've taken
over v9fs patch slinging.
- most of MM
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (116 commits)
mm,oom_reaper: check for MMF_OOM_SKIP before complaining
mm/ksm: fix interaction with THP
mm/memblock.c: cast constant ULLONG_MAX to phys_addr_t
headers: untangle kmemleak.h from mm.h
include/linux/mmdebug.h: make VM_WARN* non-rvals
mm/page_isolation.c: make start_isolate_page_range() fail if already isolated
mm: change return type to vm_fault_t
mm, oom: remove 3% bonus for CAP_SYS_ADMIN processes
mm, page_alloc: wakeup kcompactd even if kswapd cannot free more memory
kernel/fork.c: detect early free of a live mm
mm: make counting of list_lru_one::nr_items lockless
mm/swap_state.c: make bool enable_vma_readahead and swap_vma_readahead() static
block_invalidatepage(): only release page if the full page was invalidated
mm: kernel-doc: add missing parameter descriptions
mm/swap.c: remove @cold parameter description for release_pages()
mm/nommu: remove description of alloc_vm_area
zram: drop max_zpage_size and use zs_huge_class_size()
zsmalloc: introduce zs_huge_class_size()
mm: fix races between swapoff and flush dcache
fs/direct-io.c: minor cleanups in do_blockdev_direct_IO
...
arch cris & metag have been removed from supported archs.
The dts hard link files should also be removed, or the ctags
tool will give warning.
execute"ctags -R", output:
ctags: Warning: cannot open source file
"scripts/dtc/include-prefixes/cris" : No such file or directory
ctags: Warning: cannot open source file
"scripts/dtc/include-prefixes/metag" : No such file or directory
Signed-off-by: Liu Changcheng <changcheng.liu@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Sync dtc to upstream version v1.4.6-9-gaadd0b65c987. This adds a bunch
more warnings (hidden behind W=1).
- Build dtc lexer and parser files instead of using shipped versions.
- Rework overlay apply API to take an FDT as input and apply overlays in
a single step.
- Add a phandle lookup cache. This improves boot time by hundreds of
msec on systems with large DT.
- Add trivial mcp4017/18/19 potentiometers bindings.
- Remove VLA stack usage in DT code.
-----BEGIN PGP SIGNATURE-----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=ZWpa
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull DeviceTree updates from Rob Herring:
- Sync dtc to upstream version v1.4.6-9-gaadd0b65c987. This adds a
bunch more warnings (hidden behind W=1).
- Build dtc lexer and parser files instead of using shipped versions.
- Rework overlay apply API to take an FDT as input and apply overlays
in a single step.
- Add a phandle lookup cache. This improves boot time by hundreds of
msec on systems with large DT.
- Add trivial mcp4017/18/19 potentiometers bindings.
- Remove VLA stack usage in DT code.
* tag 'devicetree-for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (26 commits)
of: unittest: fix an error code in of_unittest_apply_overlay()
of: unittest: move misplaced function declaration
of: unittest: Remove VLA stack usage
of: overlay: Fix forgotten reference to of_overlay_apply()
of: Documentation: Fix forgotten reference to of_overlay_apply()
of: unittest: local return value variable related cleanups
of: unittest: remove unneeded local return value variables
dt-bindings: trivial: add various mcp4017/18/19 potentiometers
of: unittest: fix an error test in of_unittest_overlay_8()
of: cache phandle nodes to reduce cost of of_find_node_by_phandle()
dt-bindings: rockchip-dw-mshc: use consistent clock names
MAINTAINERS: Add linux/of_*.h headers to appropriate subsystems
scripts: turn off some new dtc warnings by default
scripts/dtc: Update to upstream version v1.4.6-9-gaadd0b65c987
scripts/dtc: generate lexer and parser during build instead of shipping
powerpc: boot: add strrchr function
of: overlay: do not include path in full_name of added nodes
of: unittest: clean up changeset test
arm64/efi: Make strrchr() available to the EFI namespace
ARM: boot: add strrchr function
...
This tag contains the new features we'd like to incorporate into the
RISC-V port for 4.17. We might have a bit more stuff land later in the
merge window, but I wanted to get this out earlier just so everyone can
see where we currently stand.
A short summary of the changes is:
* We've added support for dynamic ftrace on RISC-V targets.
* There have been a handful of cleanups to our atomic and locking
routines. They now more closely match the released RISC-V memory
model draft.
* Our module loading support has been cleaned up and is now enabled by
default, despite some limitations still existing.
* A patch to define COMMANDLINE_FORCE instead of COMMANDLINE_OVERRIDE so
the generic device tree code picks up handling all our command line
stuff.
There's more information in the merge commits for each patch set.
-----BEGIN PGP SIGNATURE-----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=XrWX
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-4.17-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux
Pull RISC-V updates from Palmer Dabbelt:
"This contains the new features we'd like to incorporate into the
RISC-V port for 4.17. We might have a bit more stuff land later in the
merge window, but I wanted to get this out earlier just so everyone
can see where we currently stand.
A short summary of the changes is:
- We've added support for dynamic ftrace on RISC-V targets.
- There have been a handful of cleanups to our atomic and locking
routines. They now more closely match the released RISC-V memory
model draft.
- Our module loading support has been cleaned up and is now enabled
by default, despite some limitations still existing.
- A patch to define COMMANDLINE_FORCE instead of COMMANDLINE_OVERRIDE
so the generic device tree code picks up handling all our command
line stuff.
There's more information in the merge commits for each patch set"
* tag 'riscv-for-linus-4.17-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux: (21 commits)
RISC-V: Rename CONFIG_CMDLINE_OVERRIDE to CONFIG_CMDLINE_FORCE
RISC-V: Add definition of relocation types
RISC-V: Enable module support in defconfig
RISC-V: Support SUB32 relocation type in kernel module
RISC-V: Support ADD32 relocation type in kernel module
RISC-V: Support ALIGN relocation type in kernel module
RISC-V: Support RVC_BRANCH/JUMP relocation type in kernel modulewq
RISC-V: Support HI20/LO12_I/LO12_S relocation type in kernel module
RISC-V: Support CALL relocation type in kernel module
RISC-V: Support GOT_HI20/CALL_PLT relocation type in kernel module
RISC-V: Add section of GOT.PLT for kernel module
RISC-V: Add sections of PLT and GOT for kernel module
riscv/atomic: Strengthen implementations with fences
riscv/spinlock: Strengthen implementations with fences
riscv/barrier: Define __smp_{store_release,load_acquire}
riscv/ftrace: Add HAVE_FUNCTION_GRAPH_RET_ADDR_PTR support
riscv/ftrace: Add DYNAMIC_FTRACE_WITH_REGS support
riscv/ftrace: Add ARCH_SUPPORTS_FTRACE_OPS support
riscv/ftrace: Add dynamic function graph tracer support
riscv/ftrace: Add dynamic function tracer support
...
Nothing particularly stands out here, probably because people were tied
up with spectre/meltdown stuff last time around. Still, the main pieces
are:
- Rework of our CPU features framework so that we can whitelist CPUs that
don't require kpti even in a heterogeneous system
- Support for the IDC/DIC architecture extensions, which allow us to elide
instruction and data cache maintenance when writing out instructions
- Removal of the large memory model which resulted in suboptimal codegen
by the compiler and increased the use of literal pools, which could
potentially be used as ROP gadgets since they are mapped as executable
- Rework of forced signal delivery so that the siginfo_t is well-formed
and handling of show_unhandled_signals is consolidated and made
consistent between different fault types
- More siginfo cleanup based on the initial patches from Eric Biederman
- Workaround for Cortex-A55 erratum #1024718
- Some small ACPI IORT updates and cleanups from Lorenzo Pieralisi
- Misc cleanups and non-critical fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCgAGBQJaw1TCAAoJELescNyEwWM0gyQIAJVMK4QveBW+LwF96NYdZo16
p90Aa+nqKelh/s93govQArDMv1gxyuXdFlQZVOGPQHfqpz6RhJWmBA2tFsUbQrUc
OBcioPrRihqTmKBe+1r1XORwZxkVX6GGmCn0LYpPR7I3TjxXZpvxqaxGxiUvHkci
yVxWlDTyN/7eL3akhCpCDagN3Fxwk3QnJLqE3fxOFMlY7NvQcmUxcITiUl/s469q
xK6SWH9SRH1JK8jTHPitwUBiU//3FfCqSI9HLEdDIDoTuPcVM8UetWvi4QzrzJL1
UYg8lmU0CXNmflDzZJDaMf+qFApOrGxR0YVPpBzlQvxe0JIY69g48f+JzDPz8nc=
=+gNa
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"Nothing particularly stands out here, probably because people were
tied up with spectre/meltdown stuff last time around. Still, the main
pieces are:
- Rework of our CPU features framework so that we can whitelist CPUs
that don't require kpti even in a heterogeneous system
- Support for the IDC/DIC architecture extensions, which allow us to
elide instruction and data cache maintenance when writing out
instructions
- Removal of the large memory model which resulted in suboptimal
codegen by the compiler and increased the use of literal pools,
which could potentially be used as ROP gadgets since they are
mapped as executable
- Rework of forced signal delivery so that the siginfo_t is
well-formed and handling of show_unhandled_signals is consolidated
and made consistent between different fault types
- More siginfo cleanup based on the initial patches from Eric
Biederman
- Workaround for Cortex-A55 erratum #1024718
- Some small ACPI IORT updates and cleanups from Lorenzo Pieralisi
- Misc cleanups and non-critical fixes"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (70 commits)
arm64: uaccess: Fix omissions from usercopy whitelist
arm64: fpsimd: Split cpu field out from struct fpsimd_state
arm64: tlbflush: avoid writing RES0 bits
arm64: cmpxchg: Include linux/compiler.h in asm/cmpxchg.h
arm64: move percpu cmpxchg implementation from cmpxchg.h to percpu.h
arm64: cmpxchg: Include build_bug.h instead of bug.h for BUILD_BUG
arm64: lse: Include compiler_types.h and export.h for out-of-line LL/SC
arm64: fpsimd: include <linux/init.h> in fpsimd.h
drivers/perf: arm_pmu_platform: do not warn about affinity on uniprocessor
perf: arm_spe: include linux/vmalloc.h for vmap()
Revert "arm64: Revert L1_CACHE_SHIFT back to 6 (64-byte cache line size)"
arm64: cpufeature: Avoid warnings due to unused symbols
arm64: Add work around for Arm Cortex-A55 Erratum 1024718
arm64: Delay enabling hardware DBM feature
arm64: Add MIDR encoding for Arm Cortex-A55 and Cortex-A35
arm64: capabilities: Handle shared entries
arm64: capabilities: Add support for checks based on a list of MIDRs
arm64: Add helpers for checking CPU MIDR against a range
arm64: capabilities: Clean up midr range helpers
arm64: capabilities: Change scope of VHE to Boot CPU feature
...
- improve checkpatch for more precise Kconfig code checking
- clarify effective selects by grouping reverse dependencies in help
- do not write out '# CONFIG_FOO is not set' from invisible symbols
- make oldconfig as silent as it should be
- rename 'silentoldconfig' to 'syncconfig'
- add unit-test framework and several test cases
- warn unmet dependency of tristate symbols
- make unmet dependency warnings readable, removing false positives
- improve recursive include detection
- use yylineno to simplify the line number tracking
- misc cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=sKto
-----END PGP SIGNATURE-----
Merge tag 'kconfig-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kconfig updates from Masahiro Yamada:
- improve checkpatch for more precise Kconfig code checking
- clarify effective selects by grouping reverse dependencies in help
- do not write out '# CONFIG_FOO is not set' from invisible symbols
- make oldconfig as silent as it should be
- rename 'silentoldconfig' to 'syncconfig'
- add unit-test framework and several test cases
- warn unmet dependency of tristate symbols
- make unmet dependency warnings readable, removing false positives
- improve recursive include detection
- use yylineno to simplify the line number tracking
- misc cleanups
* tag 'kconfig-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (30 commits)
kconfig: use yylineno option instead of manual lineno increments
kconfig: detect recursive inclusion earlier
kconfig: remove duplicated file name and lineno of recursive inclusion
kconfig: do not include both curses.h and ncurses.h for nconfig
kconfig: make unmet dependency warnings readable
kconfig: warn unmet direct dependency of tristate symbols selected by y
kconfig: tests: test if recursive inclusion is detected
kconfig: tests: test if recursive dependencies are detected
kconfig: tests: test randconfig for choice in choice
kconfig: tests: test defconfig when two choices interact
kconfig: tests: check visibility of tristate choice values in y choice
kconfig: tests: check unneeded "is not set" with unmet dependency
kconfig: tests: test if new symbols in choice are asked
kconfig: tests: test automatic submenu creation
kconfig: tests: add basic choice tests
kconfig: tests: add framework for Kconfig unit testing
kbuild: add PYTHON2 and PYTHON3 variables
kconfig: remove redundant streamline_config.pl prerequisite
kconfig: rename silentoldconfig to syncconfig
kconfig: invoke oldconfig instead of silentoldconfig from local*config
...
- add a shell script to get Clang version
- improve portability of build scripts
- drop always-enabled CONFIG_THIN_ARCHIVE and remove unused code
- rename built-in.o which is now thin archive to built-in.a
- process clean/build targets one by one to get along with -j option
- simplify ld-option
- improve building with CONFIG_TRIM_UNUSED_KSYMS
- define KBUILD_MODNAME even for objects shared among multiple modules
- avoid linking multiple instances of same objects from composite objects
- move <linux/compiler_types.h> to c_flags to include it only for C files
- clean-up various Makefiles
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=N5BL
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- add a shell script to get Clang version
- improve portability of build scripts
- drop always-enabled CONFIG_THIN_ARCHIVE and remove unused code
- rename built-in.o which is now thin archive to built-in.a
- process clean/build targets one by one to get along with -j option
- simplify ld-option
- improve building with CONFIG_TRIM_UNUSED_KSYMS
- define KBUILD_MODNAME even for objects shared among multiple modules
- avoid linking multiple instances of same objects from composite
objects
- move <linux/compiler_types.h> to c_flags to include it only for C
files
- clean-up various Makefiles
* tag 'kbuild-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (29 commits)
kbuild: get <linux/compiler_types.h> out of <linux/kconfig.h>
kbuild: clean up link rule of composite modules
kbuild: clean up archive rule of built-in.a
kbuild: remove partial section mismatch detection for built-in.a
net: liquidio: clean up Makefile for simpler composite object handling
lib: zstd: clean up Makefile for simpler composite object handling
kbuild: link $(real-obj-y) instead of $(obj-y) into built-in.a
kbuild: rename real-objs-y/m to real-obj-y/m
kbuild: move modname and modname-multi close to modname_flags
kbuild: simplify modname calculation
kbuild: fix modname for composite modules
kbuild: define KBUILD_MODNAME even if multiple modules share objects
kbuild: remove unnecessary $(subst $(obj)/, , ...) in modname-multi
kbuild: Use ls(1) instead of stat(1) to obtain file size
kbuild: link vmlinux only once for CONFIG_TRIM_UNUSED_KSYMS
kbuild: move include/config/ksym/* to include/ksym/*
kbuild: move CONFIG_TRIM_UNUSED_KSYMS code unneeded for external module
kbuild: restore autoksyms.h touch to the top Makefile
kbuild: move 'scripts' target below
kbuild: remove wrong 'touch' in adjust_autoksyms.sh
...
- Lots of work aligning Documentation/ABI with reality, done by Aishwarya
Pant.
- The trace documentation has been converted to RST by Changbin Du
- I thrashed up kernel-doc to deal with a parsing issue and to try to make
the code more readable. It's still a 20+-year-old Perl hack, though.
- Lots of other updates, typo fixes, and more.
-----BEGIN PGP SIGNATURE-----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=QQ/a
-----END PGP SIGNATURE-----
Merge tag 'docs-4.17' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"There's been a fair amount of activity in Documentation/ this time
around:
- Lots of work aligning Documentation/ABI with reality, done by
Aishwarya Pant.
- The trace documentation has been converted to RST by Changbin Du
- I thrashed up kernel-doc to deal with a parsing issue and to try to
make the code more readable. It's still a 20+-year-old Perl hack,
though.
- Lots of other updates, typo fixes, and more"
* tag 'docs-4.17' of git://git.lwn.net/linux: (82 commits)
Documentation/process: update FUSE project website
docs: kernel-doc: fix parsing of arrays
dmaengine: Fix spelling for parenthesis in dmatest documentation
dmaengine: Make dmatest.rst indeed reST compatible
dmaengine: Add note to dmatest documentation about supported channels
Documentation: magic-numbers: Fix typo
Documentation: admin-guide: add kvmconfig, xenconfig and tinyconfig commands
Input: alps - Update documentation for trackstick v3 format
Documentation: Mention why %p prints ptrval
COPYING: use the new text with points to the license files
COPYING: create a new file with points to the Kernel license files
Input: trackpoint: document sysfs interface
xfs: Change URL for the project in xfs.txt
char/bsr: add sysfs interface documentation
acpi: nfit: document sysfs interface
block: rbd: update sysfs interface
Documentation/sparse: fix typo
Documentation/CodingStyle: Add an example for braces
docs/vm: update 00-INDEX
kernel-doc: Remove __sched markings
...
This removes the entire architecture code for blackfin, cris, frv, m32r,
metag, mn10300, score, and tile, including the associated device drivers.
I have been working with the (former) maintainers for each one to ensure
that my interpretation was right and the code is definitely unused in
mainline kernels. Many had fond memories of working on the respective
ports to start with and getting them included in upstream, but also saw
no point in keeping the port alive without any users.
In the end, it seems that while the eight architectures are extremely
different, they all suffered the same fate: There was one company
in charge of an SoC line, a CPU microarchitecture and a software
ecosystem, which was more costly than licensing newer off-the-shelf
CPU cores from a third party (typically ARM, MIPS, or RISC-V). It seems
that all the SoC product lines are still around, but have not used the
custom CPU architectures for several years at this point. In contrast,
CPU instruction sets that remain popular and have actively maintained
kernel ports tend to all be used across multiple licensees.
The removal came out of a discussion that is now documented at
https://lwn.net/Articles/748074/. Unlike the original plans, I'm not
marking any ports as deprecated but remove them all at once after I made
sure that they are all unused. Some architectures (notably tile, mn10300,
and blackfin) are still being shipped in products with old kernels,
but those products will never be updated to newer kernel releases.
After this series, we still have a few architectures without mainline
gcc support:
- unicore32 and hexagon both have very outdated gcc releases, but the
maintainers promised to work on providing something newer. At least
in case of hexagon, this will only be llvm, not gcc.
- openrisc, risc-v and nds32 are still in the process of finishing their
support or getting it added to mainline gcc in the first place.
They all have patched gcc-7.3 ports that work to some degree, but
complete upstream support won't happen before gcc-8.1. Csky posted
their first kernel patch set last week, their situation will be similar.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=fQ8z
-----END PGP SIGNATURE-----
Merge tag 'arch-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pul removal of obsolete architecture ports from Arnd Bergmann:
"This removes the entire architecture code for blackfin, cris, frv,
m32r, metag, mn10300, score, and tile, including the associated device
drivers.
I have been working with the (former) maintainers for each one to
ensure that my interpretation was right and the code is definitely
unused in mainline kernels. Many had fond memories of working on the
respective ports to start with and getting them included in upstream,
but also saw no point in keeping the port alive without any users.
In the end, it seems that while the eight architectures are extremely
different, they all suffered the same fate: There was one company in
charge of an SoC line, a CPU microarchitecture and a software
ecosystem, which was more costly than licensing newer off-the-shelf
CPU cores from a third party (typically ARM, MIPS, or RISC-V). It
seems that all the SoC product lines are still around, but have not
used the custom CPU architectures for several years at this point. In
contrast, CPU instruction sets that remain popular and have actively
maintained kernel ports tend to all be used across multiple licensees.
[ See the new nds32 port merged in the previous commit for the next
generation of "one company in charge of an SoC line, a CPU
microarchitecture and a software ecosystem" - Linus ]
The removal came out of a discussion that is now documented at
https://lwn.net/Articles/748074/. Unlike the original plans, I'm not
marking any ports as deprecated but remove them all at once after I
made sure that they are all unused. Some architectures (notably tile,
mn10300, and blackfin) are still being shipped in products with old
kernels, but those products will never be updated to newer kernel
releases.
After this series, we still have a few architectures without mainline
gcc support:
- unicore32 and hexagon both have very outdated gcc releases, but the
maintainers promised to work on providing something newer. At least
in case of hexagon, this will only be llvm, not gcc.
- openrisc, risc-v and nds32 are still in the process of finishing
their support or getting it added to mainline gcc in the first
place. They all have patched gcc-7.3 ports that work to some
degree, but complete upstream support won't happen before gcc-8.1.
Csky posted their first kernel patch set last week, their situation
will be similar
[ Palmer Dabbelt points out that RISC-V support is in mainline gcc
since gcc-7, although gcc-7.3.0 is the recommended minimum - Linus ]"
This really says it all:
2498 files changed, 95 insertions(+), 467668 deletions(-)
* tag 'arch-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (74 commits)
MAINTAINERS: UNICORE32: Change email account
staging: iio: remove iio-trig-bfin-timer driver
tty: hvc: remove tile driver
tty: remove bfin_jtag_comm and hvc_bfin_jtag drivers
serial: remove tile uart driver
serial: remove m32r_sio driver
serial: remove blackfin drivers
serial: remove cris/etrax uart drivers
usb: Remove Blackfin references in USB support
usb: isp1362: remove blackfin arch glue
usb: musb: remove blackfin port
usb: host: remove tilegx platform glue
pwm: remove pwm-bfin driver
i2c: remove bfin-twi driver
spi: remove blackfin related host drivers
watchdog: remove bfin_wdt driver
can: remove bfin_can driver
mmc: remove bfin_sdh driver
input: misc: remove blackfin rotary driver
input: keyboard: remove bf54x driver
...
Now recordmcount.pl recognizes RISC-V object files. For the mechanism to
work, we have to disable the linker relaxation.
Cc: Greentime Hu <greentime@andestech.com>
Signed-off-by: Alan Kao <alankao@andestech.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
-----BEGIN PGP SIGNATURE-----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=DrA+
-----END PGP SIGNATURE-----
Merge tag 'drm-for-v4.17' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie:
"Cannonlake and Vega12 support are probably the two major things. This
pull lacks nouveau, Ben had some unforseen leave and a few other
blockers so we'll see how things look or maybe leave it for this merge
window.
core:
- Device links to handle sound/gpu pm dependency
- Color encoding/range properties
- Plane clipping into plane check helper
- Backlight helpers
- DP TP4 + HBR3 helper support
amdgpu:
- Vega12 support
- Enable DC by default on all supported GPUs
- Powerplay restructuring and cleanup
- DC bandwidth calc updates
- DC backlight on pre-DCE11
- TTM backing store dropping support
- SR-IOV fixes
- Adding "wattman" like functionality
- DC crc support
- Improved DC dual-link handling
amdkfd:
- GPUVM support for dGPU
- KFD events for dGPU
- Enable PCIe atomics for dGPUs
- HSA process eviction support
- Live-lock fixes for process eviction
- VM page table allocation fix for large-bar systems
panel:
- Raydium RM68200
- AUO G104SN02 V2
- KEO TX31D200VM0BAA
- ARM Versatile panels
i915:
- Cannonlake support enabled
- AUX-F port support added
- Icelake base enabling until internal milestone of forcewake support
- Query uAPI interface (used for GPU topology information currently)
- Compressed framebuffer support for sprites
- kmem cache shrinking when GPU is idle
- Avoid boosting GPU when waited item is being processed already
- Avoid retraining LSPCON link unnecessarily
- Decrease request signaling latency
- Deprecation of I915_SET_COLORKEY_NONE
- Kerneldoc and compiler warning cleanup for upcoming CI enforcements
- Full range ycbcr toggling
- HDCP support
i915/gvt:
- Big refactor for shadow ppgtt
- KBL context save/restore via LRI cmd (Weinan)
- Properly unmap dma for guest page (Changbin)
vmwgfx:
- Lots of various improvements
etnaviv:
- Use the drm gpu scheduler
- prep work for GC7000L support
vc4:
- fix alpha blending
- Expose perf counters to userspace
pl111:
- Bandwidth checking/limiting
- Versatile panel support
sun4i:
- A83T HDMI support
- A80 support
- YUV plane support
- H3/H5 HDMI support
omapdrm:
- HPD support for DVI connector
- remove lots of static variables
msm:
- DSI updates from 10nm / SDM845
- fix for race condition with a3xx/a4xx fence completion irq
- some refactoring/prep work for eventual a6xx support (ie. when we
have a userspace)
- a5xx debugfs enhancements
- some mdp5 fixes/cleanups to prepare for eventually merging
writeback
- support (ie. when we have a userspace)
tegra:
- mmap() fixes for fbdev devices
- Overlay plane for hw cursor fix
- dma-buf cache maintenance support
mali-dp:
- YUV->RGB conversion support
rockchip:
- rk3399/chromebook fixes and improvements
rcar-du:
- LVDS support move to drm bridge
- DT bindings for R8A77995
- Driver/DT support for R8A77970
tilcdc:
- DRM panel support"
* tag 'drm-for-v4.17' of git://people.freedesktop.org/~airlied/linux: (1646 commits)
drm/i915: Fix hibernation with ACPI S0 target state
drm/i915/execlists: Use a locked clear_bit() for synchronisation with interrupt
drm/i915: Specify which engines to reset following semaphore/event lockups
drm/i915/dp: Write to SET_POWER dpcd to enable MST hub.
drm/amdkfd: Use ordered workqueue to restore processes
drm/amdgpu: Fix acquiring VM on large-BAR systems
drm/amd/pp: clean header file hwmgr.h
drm/amd/pp: use mlck_table.count for array loop index limit
drm: Fix uabi regression by allowing garbage mode->type from userspace
drm/amdgpu: Add an ATPX quirk for hybrid laptop
drm/amdgpu: fix spelling mistake: "asssert" -> "assert"
drm/amd/pp: Add new asic support in pp_psm.c
drm/amd/pp: Clean up powerplay code on Vega12
drm/amd/pp: Add smu irq handlers for legacy asics
drm/amd/pp: Fix set wrong temperature range on smu7
drm/amdgpu: Don't change preferred domian when fallback GTT v5
drm/vmwgfx: Bump version patchlevel and date
drm/vmwgfx: use monotonic event timestamps
drm/vmwgfx: Unpin the screen object backup buffer when not used
drm/vmwgfx: Stricter count of legacy surface device resources
...
Since commit 28128c61e0 ("kconfig.h: Include compiler types to avoid
missed struct attributes"), <linux/kconfig.h> pulls in kernel-space
headers to unrelated places.
Commit 0f9da844d8 ("MIPS: boot: Define __ASSEMBLY__ for its.S build")
suppress the build error by defining __ASSEMBLY__, but ITS (i.e. DTS)
is not assembly, and should not include <linux/compiler_types.h> in the
first place.
Looking at arch/s390/tools/Makefile, host programs gen_facilities and
gen_opcode_table now pull in <linux/compiler_types.h> as well.
The motivation for that commit was to define necessary attributes
before any struct is defined. Obviously, this happens only in C.
It is enough to include <linux/compiler_types.h> only when compiling
C files, and only when compiling kernel space. Move the include to
c_flags.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This changes security_hook_heads to use hlist_heads instead of
the circular doubly-linked list heads. This should cut down
the size of the struct by about half.
In addition, it allows mutation of the hooks at the tail of the
callback list without having to modify the head. The longer-term
purpose of this is to enable making the heads read only.
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Reviewed-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
The logic with parses array has a bug that prevents it to
parse arrays like:
struct {
...
struct {
u64 msdu[IEEE80211_NUM_TIDS + 1];
...
...
Fix the parser to accept it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJauCZfAAoJEHm+PkMAQRiGWGUH/2rhdQDkoJpYWnjaQkolECG8
MxpGE7nmIIHxQcbSDdHTGJ8IhVm6Z5wZ7ym/PwCDTT043Y1y341sJrIwL2/nTG6d
HVidk8hFvgN6QzlzVAHT3ZZMII/V9Zt+VV5SUYLGnPAVuJNHo/6uzWlTU5g+NTFo
IquFDdQUaGBlkKqby+NoAFnkV1UAIkW0g22cfvPnlO5GMer0gusGyVNvVp7TNj3C
sqj4Hvt3RMDLMNe9RZ2pFTiOD096n8FWpYftZneUTxFImhRV3Jg5MaaYZm9SI3HW
tXrv/LChT/F1mi5Pkx6tkT5Hr8WvcrwDMJ4It1kom10RqWAgjxIR3CMm448ileY=
=YKUG
-----END PGP SIGNATURE-----
Backmerge tag 'v4.16-rc7' into drm-next
Linux 4.16-rc7
This was requested by Daniel, and things were getting
a bit hard to reconcile, most of the conflicts were
trivial though.
There is a change in how command line parsing is done in this version.
Excludes and includes are now ordered with the file list. Since
the spec file puts the file list before the exclude list it means newer
tar ignores the excludes and packs all the build output into the
kernel-devel RPM resulting in a huge package.
Simple argument re-ordering fixes the problem.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Since d5d332d3f7, a couple of links in scripts/dtc/include-prefixes
are additionally required in order to build device trees with the header
package.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The Blackfin port has been removed from the kernel, also remove the
blackfin specific bits from the checkstack.pl script.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
These two architectures are getting removed, so we no longer
need the special cases.
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tracking the line number by hand is error-prone since you need to
increment it in every \n matching pattern.
If '%option yylineno' is set, flex defines 'yylineno' to contain the
current line number and automatically updates it each time it reads a
\n character. This is much more convenient although the lexer does
not initializes yylineno, so you need to set it to 1 each time you
start reading a new file, and restore it you go back to the previous
file.
I tested this with DEBUG_PARSE, and confirmed the same dump message
was produced.
I removed the perf-report option. Otherwise, I see the following
message:
%option yylineno entails a performance penalty ONLY on rules that
can match newline characters
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Currently, the recursive inclusion is not detected when the offending
file is about to be included; it is detected the offending file is
about to include the *next* file. This is because the detection loop
does not involve the file being included.
Do this check against the file that is about to be included so that
the recursive inclusion is detected before unneeded parsing happens.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
As in the unit test, the error message for the recursive inclusion
looks like this:
Kconfig.inc1:4: recursive inclusion detected. Inclusion path:
current file : 'Kconfig.inc1'
included from: 'Kconfig.inc3:1'
included from: 'Kconfig.inc2:3'
included from: 'Kconfig.inc1:4'
The 'Kconfig.inc1:4' is duplicated in the first and last lines.
Also, the single quotes do not help readability.
Change the message like follows:
Recursive inclusion detected.
Inclusion path:
current file : Kconfig.inc1
included from: Kconfig.inc3:1
included from: Kconfig.inc2:3
included from: Kconfig.inc1:4
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
nconf.h includes <curses.h> and "ncurses.h", but it does not need to
include both. Generally, it should fall back to curses.h only when
ncurses.h is not found. But, looks like it has never happened;
these includes have been here for many years since commit 692d97c380
("kconfig: new configuration interface (nconfig)"), and nobody has
complained about hard-coding of ncurses.h . Let's simply drop the
curses.h inclusion.
I replaced "ncurses.h" with <ncurses.h> since it is not a local file.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Currently, the unmet dependency warnings end up with endlessly long
expressions, most of which are false positives.
Here is test code to demonstrate how it currently works.
[Test Case]
config DEP1
def_bool y
config DEP2
bool "DEP2"
config A
bool "A"
select E
config B
bool "B"
depends on DEP2
select E
config C
bool "C"
depends on DEP1 && DEP2
select E
config D
def_bool n
select E
config E
bool
depends on DEP1 && DEP2
[Result]
$ make config
scripts/kconfig/conf --oldaskconfig Kconfig
*
* Linux Kernel Configuration
*
DEP2 (DEP2) [N/y/?] (NEW) n
A (A) [N/y/?] (NEW) y
warning: (A && B && D) selects E which has unmet direct
dependencies (DEP1 && DEP2)
Here, I see some points to be improved.
First, '(A || B || D)' would make more sense than '(A && B && D)'.
I am not sure if this is intentional, but expr_simplify_unmet_dep()
turns OR expressions into AND, like follows:
case E_OR:
return expr_alloc_and(
Second, we see false positives. 'A' is a real unmet dependency.
'B' is false positive because 'DEP1' is fixed to 'y', and 'B' depends
on 'DEP2'. 'C' was correctly dropped by expr_simplify_unmet_dep().
'D' is also false positive because it has no chance to be enabled.
Current expr_simplify_unmet_dep() cannot avoid those false positives.
After all, I decided to use the same helpers as used for printing
reverse dependencies in the help.
With this commit, unreadable warnings (most of the reported symbols are
false positives) in the real world:
$ make ARCH=score allyesconfig
scripts/kconfig/conf --allyesconfig Kconfig
warning: (HWSPINLOCK_QCOM && AHCI_MTK && STMMAC_PLATFORM &&
DWMAC_IPQ806X && DWMAC_LPC18XX && DWMAC_OXNAS && DWMAC_ROCKCHIP &&
DWMAC_SOCFPGA && DWMAC_STI && TI_CPSW && PINCTRL_GEMINI &&
PINCTRL_OXNAS && PINCTRL_ROCKCHIP && PINCTRL_DOVE &&
PINCTRL_ARMADA_37XX && PINCTRL_STM32 && S3C2410_WATCHDOG &&
VIDEO_OMAP3 && VIDEO_S5P_FIMC && USB_XHCI_MTK && RTC_DRV_AT91SAM9 &&
LPC18XX_DMAMUX && VIDEO_OMAP4 && COMMON_CLK_GEMINI &&
COMMON_CLK_ASPEED && COMMON_CLK_NXP && COMMON_CLK_OXNAS &&
COMMON_CLK_BOSTON && QCOM_ADSP_PIL && QCOM_Q6V5_PIL && QCOM_GSBI &&
ATMEL_EBI && ST_IRQCHIP && RESET_IMX7 && PHY_HI6220_USB &&
PHY_RALINK_USB && PHY_ROCKCHIP_PCIE && PHY_DA8XX_USB) selects
MFD_SYSCON which has unmet direct dependencies (HAS_IOMEM)
warning: (PINCTRL_AT91 && PINCTRL_AT91PIO4 && PINCTRL_OXNAS &&
PINCTRL_PISTACHIO && PINCTRL_PIC32 && PINCTRL_MESON &&
PINCTRL_NOMADIK && PINCTRL_MTK && PINCTRL_MT7622 && GPIO_TB10X)
selects OF_GPIO which has unmet direct dependencies (GPIOLIB && OF &&
HAS_IOMEM)
warning: (FAULT_INJECTION_STACKTRACE_FILTER && LATENCYTOP && LOCKDEP)
selects FRAME_POINTER which has unmet direct dependencies
(DEBUG_KERNEL && (CRIS || M68K || FRV || UML || SUPERH || BLACKFIN ||
MN10300 || METAG) || ARCH_WANT_FRAME_POINTERS)
will be turned into:
$ make ARCH=score allyesconfig
scripts/kconfig/conf --allyesconfig Kconfig
WARNING: unmet direct dependencies detected for MFD_SYSCON
Depends on [n]: HAS_IOMEM [=n]
Selected by [y]:
- PINCTRL_STM32 [=y] && PINCTRL [=y] && (ARCH_STM32 ||
COMPILE_TEST [=y]) && OF [=y]
- RTC_DRV_AT91SAM9 [=y] && RTC_CLASS [=y] && (ARCH_AT91 ||
COMPILE_TEST [=y])
- RESET_IMX7 [=y] && RESET_CONTROLLER [=y]
- PHY_HI6220_USB [=y] && (ARCH_HISI && ARM64 ||
COMPILE_TEST [=y])
- PHY_RALINK_USB [=y] && (RALINK || COMPILE_TEST [=y])
- PHY_ROCKCHIP_PCIE [=y] && (ARCH_ROCKCHIP && OF [=y] ||
COMPILE_TEST [=y])
WARNING: unmet direct dependencies detected for OF_GPIO
Depends on [n]: GPIOLIB [=y] && OF [=y] && HAS_IOMEM [=n]
Selected by [y]:
- PINCTRL_MTK [=y] && PINCTRL [=y] && (ARCH_MEDIATEK ||
COMPILE_TEST [=y]) && OF [=y]
- PINCTRL_MT7622 [=y] && PINCTRL [=y] && (ARCH_MEDIATEK ||
COMPILE_TEST [=y]) && OF [=y] && (ARM64 || COMPILE_TEST [=y])
WARNING: unmet direct dependencies detected for FRAME_POINTER
Depends on [n]: DEBUG_KERNEL [=y] && (CRIS || M68K || FRV || UML ||
SUPERH || BLACKFIN || MN10300 || METAG) || ARCH_WANT_FRAME_POINTERS [=n]
Selected by [y]:
- LATENCYTOP [=y] && DEBUG_KERNEL [=y] && STACKTRACE_SUPPORT [=y] &&
PROC_FS [=y] && !MIPS && !PPC && !S390 && !MICROBLAZE && !ARM_UNWIND &&
!ARC && !X86
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
Commit 246cf9c26b ("kbuild: Warn on selecting symbols with unmet
direct dependencies") forcibly promoted ->dir_dep.tri to yes from mod.
So, the unmet direct dependencies of tristate symbols are not reported.
[Test Case]
config MODULES
def_bool y
option modules
config A
def_bool y
select B
config B
tristate "B"
depends on m
This causes unmet dependency because 'B' is forced 'y' ignoring
'depends on m'. This should be warned.
On the other hand, the following case ('B' is bool) should not be
warned, so 'depends on m' for bool symbols should be naturally treated
as 'depends on y'.
[Test Case2 (not unmet dependency)]
config MODULES
def_bool y
option modules
config A
def_bool y
select B
config B
bool "B"
depends on m
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
If recursive inclusion is detected, it should fail with error
messages. Test this.
This also tests the line numbers in the error message, fixed by
commit 5ae6fcc4bb ("kconfig: fix line number in recursive inclusion
error message").
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
Recursive dependency should be detected and warned. Test this.
This indirectly tests the line number increments.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
Commit 3b9a19e089 ("kconfig: loop as long as we changed some symbols
in randconfig") fixed randconfig where a choice contains a sub-choice.
Prior to that commit, the sub-choice values were not set.
I am not sure whether this is an intended feature or just something
people discovered works, but it is used in the real world;
drivers/usb/gadget/legacy/Kconfig is source'd in a choice context,
then creates a sub-choice in it.
For the test case in this commit, there are 3 possible results.
Case 1:
CONFIG_A=y
# CONFIG_B is not set
Case 2:
# CONFIG_A is not set
CONFIG_B=y
CONFIG_C=y
# CONFIG_D is not set
Case 3:
# CONFIG_A is not set
CONFIG_B=y
# CONFIG_C is not set
CONFIG_D=y
CONFIG_E=y
So, this test iterates several times, and checks if the result is
either of the three.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
Commit fbe98bb9ed ("kconfig: Fix defconfig when one choice menu
selects options that another choice menu depends on") fixed defconfig
when two choices interact (i.e. calculating the visibility of a choice
requires to calculate another choice).
The test code in that commit log was based on the real world example,
and complicated. So, I shrunk it down to the following:
defconfig.choice:
---8<---
CONFIG_CHOICE_VAL0=y
---8<---
---8<---
config MODULES
def_bool y
option modules
choice
prompt "Choice"
config CHOICE_VAL0
tristate "Choice 0"
config CHOICE_VAL1
tristate "Choice 1"
endchoice
choice
prompt "Another choice"
depends on CHOICE_VAL0
config DUMMY
bool "dummy"
endchoice
---8<---
Prior to commit fbe98bb9ed,
$ scripts/kconfig/conf --defconfig=defconfig.choice Kconfig.choice
resulted in:
CONFIG_MODULES=y
CONFIG_CHOICE_VAL0=m
# CONFIG_CHOICE_VAL1 is not set
CONFIG_DUMMY=y
where the expected result would be:
CONFIG_MODULES=y
CONFIG_CHOICE_VAL0=y
# CONFIG_CHOICE_VAL1 is not set
CONFIG_DUMMY=y
Roughly, this weird behavior happened like this:
Symbols are calculated a couple of times. First, all symbols are
calculated in conf_read(). The first 'choice' is evaluated to 'y'
due to the SYMBOL_DEF_USER flag, but sym_calc_choice() clears it
unless all of its choice values are explicitly set by the user.
conf_set_all_new_symbols() clears all SYMBOL_VALID flags. Then, only
choices are calculated. Here, the SYMBOL_DEF_USER for the first choice
has been forgotten, so it is evaluated to 'm'. set_all_choice_values()
sets SYMBOL_DEF_USER again to choice symbols.
When calculating the second choice, due to 'depends on CHOICE_VAL0',
it triggers the calculation of CHOICE_VAL0. As a result, SYMBOL_VALID
is set for CHOICE_VAL0.
Symbols except choices get the final chance of re-calculation in
conf_write(). In a normal case, CHOICE_VAL0 would be re-calculated,
then the first choice would be indirectly re-calculated with the
SYMBOL_DEF_USER which has been recalled by set_all_choice_values(),
which would be evaluated to 'y'. But, in this case, CHOICE_VAL0 has
already been marked as SYMBOL_VALID, so this re-calculation does not
happen. Then, =m from the conf_set_all_new_symbols() phase is written
out to the .config file.
Add a unit test for this naive case.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
If tristate choice values depend on symbols set to 'm', they should be
hidden when the choice containing them is changed from 'm' to 'y'
(i.e. exclusive choice).
This issue was fixed by commit fa64e5f6a3 ("kconfig/symbol.c: handle
choice_values that depend on 'm' symbols").
Add a test case to avoid regression.
For the input in this unit test, there is a room for argument if
"# CONFIG_CHOICE1 is not set" should be written to the .config file.
After commit fa64e5f6a3, this line was written to the .config file.
With commit cb67ab2cd2 ("kconfig: do not write choice values when
their dependency becomes n"), it is not written now.
In this test, "# CONFIG_CHOICE1 is not set" is don't care.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
Commit cb67ab2cd2 ("kconfig: do not write choice values when their
dependency becomes n") fixed a problem where "# CONFIG_... is not set"
for choice values are wrongly written into the .config file when they
are once visible, then become invisible later.
Add a test for this naive case.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
If new choice values are added with new dependency, and they become
visible during user configuration, oldconfig should recognize them
as (NEW), and ask the user for choice.
This issue was fixed by commit 5d09598d48 ("kconfig: fix new choices
being skipped upon config update").
This is a subtle corner case. Add a test case to avoid breakage.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
If a symbols has dependency on the preceding symbol, the menu entry
should become the submenu of the preceding one, and displayed with
deeper indentation.
This is done by restructuring the menu tree in menu_finalize().
It is a bit complicated computation, so let's add a test case.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
The calculation of 'choice' is a bit complicated part in Kconfig.
The behavior of 'y' choice is intuitive. If choice values are tristate,
the choice can be 'm' where each value can be enabled independently.
Also, if a choice is marked as 'optional', the whole choice can be
invisible.
Test basic functionality of choice.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
Many parts in Kconfig are so cryptic and need refactoring. However,
its complexity prevents us from moving forward. There are several
naive corner cases where it is difficult to notice breakage. If
those are covered by unit tests, we will be able to touch the code
with more confidence.
Here is a simple test framework based on pytest. The conftest.py
provides a fixture useful to run commands such as 'oldaskconfig' etc.
and to compare the resulted .config, stdout, stderr with expectations.
How to add test cases?
----------------------
For each test case, you should create a subdirectory under
scripts/kconfig/tests/ (so test cases are separated from each other).
Every test case directory should contain the following files:
- __init__.py: describes test functions
- Kconfig: the top level Kconfig file for the test
To do a useful job, test cases generally need additional data like
input .config and information about expected results.
How to run tests?
-----------------
You need python3 and pytest. Then, run "make testconfig". O= option
is supported. If V=1 is given, detailed logs captured during tests
are displayed.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
The local{yes,mod}config targets currently have streamline_config.pl as
a prerequisite. This is redundant, because streamline_config.pl is a
checked-in file with no prerequisites.
Remove the prerequisite and reference streamline_config.pl directly in
the recipe of the rule instead.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
As commit cedd55d49d ("kconfig: Remove silentoldconfig from help
and docs; fix kconfig/conf's help") mentioned, 'silentoldconfig' is a
historical misnomer. That commit removed it from help and docs since
it is an internal interface. If so, it should be allowed to rename
it to something more intuitive. 'syncconfig' is the one I came up
with because it updates the .config if necessary, then synchronize
include/generated/autoconf.h and include/config/* with it.
You should not manually invoke 'silentoldcofig'. Display warning if
used in case existing scripts are doing wrong.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
The purpose of local{yes,mod}config is to arrange the .config file
based on actually loaded modules. It is unnecessary to update
include/generated/autoconf.h and include/config/* stuff here.
They will be updated as needed during the build.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
Historically, "make oldconfig" has changed its behavior several times,
quieter or louder. (I attached the history below.) Currently, it is
not as quiet as it should be. This commit addresses it.
Test Case
---------
---------------------------(Kconfig)----------------------------
menu "menu"
config FOO
bool "foo"
menu "sub menu"
config BAR
bool "bar"
endmenu
endmenu
menu "sibling menu"
config BAZ
bool "baz"
endmenu
----------------------------------------------------------------
---------------------------(.config)----------------------------
CONFIG_BAR=y
CONFIG_BAZ=y
----------------------------------------------------------------
With the Kconfig and .config above, "make silentoldconfig" and
"make oldconfig" work differently, like follows:
$ make silentoldconfig
scripts/kconfig/conf --silentoldconfig Kconfig
*
* Restart config...
*
*
* menu
*
foo (FOO) [N/y/?] (NEW) y
#
# configuration written to .config
#
$ make oldconfig
scripts/kconfig/conf --oldconfig Kconfig
*
* Restart config...
*
*
* menu
*
foo (FOO) [N/y/?] (NEW) y
*
* sub menu
*
bar (BAR) [Y/n/?] y
#
# configuration written to .config
#
Both hide "sibling node" since it is irrelevant. The difference is
that silentoldconfig hides "sub menu" whereas oldconfig does not.
The behavior of silentoldconfig is preferred since the "sub menu"
does not contain any new symbol.
The root cause is in conf(). There are three input modes that can
call conf(); oldaskconfig, oldconfig, and silentoldconfig.
Everytime conf() encounters a menu entry, it calls check_conf() to
check if it contains new symbols. If no new symbol is found, the
menu is just skipped.
Currently, this happens only when input_mode == silentoldconfig.
The oldaskconfig enters into the check_conf() loop as silentoldconfig,
so oldaskconfig works likewise for the second loop or later, but it
never happens for oldconfig. So, irrelevant sub-menus are shown for
oldconfig.
Change the test condition to "input_mode != oldaskconfig". This is
false only for the first loop of oldaskconfig; it must ask the user
all symbols, so no need to call check_conf().
History of oldconfig
--------------------
[0] Originally, "make oldconfig" was as loud as "make config" (It
showed the entire .config file)
[1] Commit cd9140e1e7 ("kconfig: make oldconfig is now less chatty")
made oldconfig quieter, but it was still less quieter than
silentoldconfig. (oldconfig did not hide sub-menus)
[2] Commit 204c96f609 ("kconfig: fix silentoldconfig") changed
the input_mode of oldconfig to "ask_silent" from "ask_new".
So, oldconfig really became as quiet as silentoldconfig.
(oldconfig hided irrelevant sub-menus)
[3] Commit 4062f1a4c0 ("kconfig: use long options in conf") made
oldconfig as loud as [0] due to misconversion.
[4] Commit 1482834971 ("kconfig: fix make oldconfig") addressed
the misconversion of [3], but it made oldconfig quieter only to
the same level as [1], not [2].
This commit is restoring the behavior of [2].
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
check_conf() never increments conf_cnt for listnewconfig, so conf_cnt
is always zero.
In other words, conf_cnt is not zero, "input_mode != listnewconfig"
is met.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
conf() is never called for listnewconfig / olddefconfig.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
check_conf() traverses the menu tree, but it is completely no-op for
olddefconfig because the following if-else block does nothing.
if (input_mode == listnewconfig) {
...
} else if (input_mode != olddefconfig) {
...
}
As the help message says, olddefconfig automatically sets new symbols
to their default value. There is no room for manual intervention.
So, calling check_conf() for olddefconfig is odd in the first place.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
=== Background ===
- Visible n-valued bool/tristate symbols generate a
'# CONFIG_FOO is not set' line in the .config file. The idea is to
remember the user selection without having to set a Makefile
variable. Having n correspond to the variable being undefined in the
Makefiles makes for easy CONFIG_* tests.
- Invisible n-valued bool/tristate symbols normally do not generate a
'# CONFIG_FOO is not set' line, because user values from .config
files have no effect on invisible symbols anyway.
Currently, there is one exception to this rule: Any bool/tristate symbol
that gets the value n through a 'default' property generates a
'# CONFIG_FOO is not set' line, even if the symbol is invisible.
Note that this only applies to explicitly given defaults, and not when
the symbol implicitly defaults to n (like bool/tristate symbols without
'default' properties do).
This is inconsistent, and seems redundant:
- As mentioned, the '# CONFIG_FOO is not set' won't affect the symbol
once the .config is read back in.
- Even if the symbol is invisible at first but becomes visible later,
there shouldn't be any harm in recalculating the default value
rather than viewing the '# CONFIG_FOO is not set' as a previous
user value of n.
=== Changes ===
Change sym_calc_value() to only set SYMBOL_WRITE (write to .config) for
non-n-valued 'default' properties.
Note that SYMBOL_WRITE is always set for visible symbols regardless of whether
they have 'default' properties or not, so this change only affects invisible
symbols.
This reduces the size of the x86 .config on my system by about 1% (due
to removed '# CONFIG_FOO is not set' entries).
One side effect of (and the main motivation for) this change is making
the following two definitions behave exactly the same:
config FOO
bool
config FOO
bool
default n
With this change, neither of these will generate a
'# CONFIG_FOO is not set' line (assuming FOO isn't selected/implied).
That might make it clearer to people that a bare 'default n' is
redundant.
This change only affects generated .config files and not autoconf.h:
autoconf.h only includes #defines for non-n bool/tristate symbols.
=== Testing ===
The following testing was done with the x86 Kconfigs:
- .config files generated before and after the change were compared to
verify that the only difference is some '# CONFIG_FOO is not set'
entries disappearing. A couple of these were inspected manually, and
most turned out to be from redundant 'default n/def_bool n'
properties.
- The generated include/generated/autoconf.h was compared before and
after the change and verified to be identical.
- As a sanity check, the same modification was done to Kconfiglib.
The Kconfiglib test suite was then run to check for any mismatches
against the output of the C implementation.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Surprisingly or not, disabling a CONFIG option (which is assumed to
be unneeded) may be not so trivial. Especially it is not trivial, when
this CONFIG option is selected by a dozen of other configs. Before the
moment commit 1ccb271433 ("kconfig: make "Selected by:" and
"Implied by:" readable") popped up in v4.16-rc1, it was an absolute pain
to break down the "Selected by" reverse dependency expression in order
to identify all those configs which select (IOW *do not allow
disabling*) a certain feature (assumed to be not needed).
This patch tries to make one step further by putting at users'
fingertips the revdep top level OR sub-expressions grouped/clustered by
the tristate value they evaluate to. This should allow the users to
directly concentrate on and tackle the _active_ reverse dependencies.
To give some numbers and quantify the complexity of certain reverse
dependencies, assuming commit 617aebe6a9 ("Merge tag
'usercopy-v4.16-rc1' of
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux"), ARCH=arm64
and vanilla arm64 defconfig, here is the top 10 CONFIG options with
the highest amount of top level "||" sub-expressions/tokens that make
up the final "Selected by" reverse dependency expression.
| Config | All revdep | Active revdep |
|-------------------|------------|---------------|
| REGMAP_I2C | 212 | 9 |
| CRC32 | 167 | 25 |
| FW_LOADER | 128 | 5 |
| MFD_CORE | 124 | 9 |
| FB_CFB_IMAGEBLIT | 114 | 2 |
| FB_CFB_COPYAREA | 111 | 2 |
| FB_CFB_FILLRECT | 110 | 2 |
| SND_PCM | 103 | 2 |
| CRYPTO_HASH | 87 | 19 |
| WATCHDOG_CORE | 86 | 6 |
The story behind the above is that users need to visually
review/evaluate 212 expressions which *potentially* select REGMAP_I2C
in order to identify the expressions which *actually* select REGMAP_I2C,
for a particular ARCH and for a particular defconfig used.
To make this experience smoother, change the way reverse dependencies
are displayed to the user from [1] to [2].
[1] Old representation of DMA_ENGINE_RAID:
Selected by:
- AMCC_PPC440SPE_ADMA [=n] && DMADEVICES [=y] && (440SPe || 440SP)
- BCM_SBA_RAID [=m] && DMADEVICES [=y] && (ARM64 [=y] || ...
- FSL_RAID [=n] && DMADEVICES [=y] && FSL_SOC && ...
- INTEL_IOATDMA [=n] && DMADEVICES [=y] && PCI [=y] && X86_64
- MV_XOR [=n] && DMADEVICES [=y] && (PLAT_ORION || ARCH_MVEBU [=y] ...
- MV_XOR_V2 [=y] && DMADEVICES [=y] && ARM64 [=y]
- XGENE_DMA [=n] && DMADEVICES [=y] && (ARCH_XGENE [=y] || ...
- DMATEST [=n] && DMADEVICES [=y] && DMA_ENGINE [=y]
[2] New representation of DMA_ENGINE_RAID:
Selected by [y]:
- MV_XOR_V2 [=y] && DMADEVICES [=y] && ARM64 [=y]
Selected by [m]:
- BCM_SBA_RAID [=m] && DMADEVICES [=y] && (ARM64 [=y] || ...
Selected by [n]:
- AMCC_PPC440SPE_ADMA [=n] && DMADEVICES [=y] && (440SPe || ...
- FSL_RAID [=n] && DMADEVICES [=y] && FSL_SOC && ...
- INTEL_IOATDMA [=n] && DMADEVICES [=y] && PCI [=y] && X86_64
- MV_XOR [=n] && DMADEVICES [=y] && (PLAT_ORION || ARCH_MVEBU [=y] ...
- XGENE_DMA [=n] && DMADEVICES [=y] && (ARCH_XGENE [=y] || ...
- DMATEST [=n] && DMADEVICES [=y] && DMA_ENGINE [=y]
Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This commit splits out the special E_OR handling ('-' instead of '||')
into a dedicated helper expr_print_revdev().
Restore the original expr_print() prior to commit 1ccb271433
("kconfig: make "Selected by:" and "Implied by:" readable").
This makes sense because:
- We need to chop those expressions only when printing the reverse
dependency, and only when E_OR is encountered
- Otherwise, it should be printed as before, so fall back to
expr_print()
This also improves the behavior; for a single line, it was previously
displayed in the same line as "Selected by", like this:
Selected by: A [=n] && B [=n]
This will be displayed in a new line, consistently:
Selected by:
- A [=n] && B [=n]
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
IMO, we should discourage '---help---' for new help texts, even in cases
where it would be consistent with other help texts in the file. This
will help if we ever want to get rid of '---help---' in the future.
Also simplify the code to only check for exactly '---help---'. Since
commit c2264564df ("kconfig: warn of unhandled characters in Kconfig
commands"), '---help---' is a proper keyword and can only appear in that
form. Prior to that commit, '---help---' working was more of a syntactic
quirk.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Currently, only Kconfig symbols are checked for a missing or short help
text, and are only checked if they are defined with the 'config'
keyword.
To make the check more general, extend it to also check help texts for
choices and for symbols defined with the 'menuconfig' keyword.
This increases the accuracy of the check for symbols that would already
have been checked as well, since e.g. a 'menuconfig' symbol after a help
text will be recognized as ending the preceding symbol/choice
definition.
To increase the accuracy of the check further, also recognize 'if',
'endif', 'menu', 'endmenu', 'endchoice', and 'source' as ending a
symbol/choice definition.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The check for a missing or short help text only considers symbols with a
prompt, but doesn't recognize any of the following as a prompt:
bool 'foo'
tristate 'foo'
prompt "foo"
prompt 'foo'
Make the check recognize those too.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
With the incremental linking entirely dropped, we can simplify
the Makefile.
While I am here, I renamed cmd_link_o_target to cmd_ar_builtin.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
When built-in.o was incrementally linked with 'ld -r', the section
mismatch analysis for the individual built-in.o was possible when
CONFIG_DEBUG_SECTION_MISMATCH was enabled.
With the migration to the thin archive, built-in.a (former, built-in.o)
is no longer an ELF file. So, the modpost does nothing useful.
scripts/mod/modpost.c just checks the header to bail out, as follows:
/* Is this a valid ELF file? */
if ((hdr->e_ident[EI_MAG0] != ELFMAG0) ||
(hdr->e_ident[EI_MAG1] != ELFMAG1) ||
(hdr->e_ident[EI_MAG2] != ELFMAG2) ||
(hdr->e_ident[EI_MAG3] != ELFMAG3)) {
/* Not an ELF file - silently ignore it */
return 0;
}
We have the full analysis in the final link stage anyway, so we would
not miss the section mismatching.
I do not see a good reason to require extra linking only for the
purpose of the per-directory analysis. Just get rid of this part.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
In Kbuild, Makefiles can add the same object to obj-y multiple
times. So,
obj-y += foo.o
obj-y += foo.o
is fine.
However, this is not true when the same object is added multiple
times via composite objects. For example,
obj-y += foo.o bar.o
foo-objs := foo-bar-common.o foo-only.o
bar-objs := foo-bar-common.o bar-only.o
causes build error because two instances of foo-bar-common.o are
linked into the vmlinux.
Makefiles tend to invent ugly work-around, for example
- lib/zstd/Makefile
- drivers/net/ethernet/cavium/liquidio/Makefile
The technique used in Kbuild to avoid the multiple definition error
is to use $(filter $(obj-y), $^). Here, $^ lists the names of all
the prerequisites with duplicated names removed.
By replacing it with $(filter $(real-obj-y), $^) we can do likewise
for composite objects. For built-in objects, we do not need to keep
the composite object structure. We can simply expand them, and link
$(real-obj-y) to built-in.a.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
When I was refactoring Makefiles, I stupidly mistook 'real-obj-y' for
'real-objs-y' over and over again. Finally, I decide to rename it to
'real-obj-y'. This is consistent with 'obj-y', 'subdir-obj-y'.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Just a cosmetic change to put related code close together.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Cao jin <caoj.fnst@cn.fujitsu.com>
modname can be calculated much more simply. If modname-multi is
empty, it is a single-used object. So, modname = $(basetarget).
Otherwise, modname = $(modname-multi).
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Commit cf4f21938e ("kbuild: Allow to specify composite modules
with modname-m") added modname-m support, but missed to update the
corresponding multi-objs-m & modname-multi definition.
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Currently, KBUILD_MODNAME is defined only when $(modname) contains
just one word. If an object is shared among multiple modules,
undefined KBUILD_MODNAME could cause a build error. For example,
if CONFIG_DYNAMIC_DEBUG is enabled, any call of printk() populates
.modname, then fails to build due to undefined KBUILD_MODNAME.
Take the following code as an example:
obj-m += foo.o
obj-m += bar.o
foo-objs := foo-bar-common.o foo-only.o
bar-objs := foo-bar-common.o bar-only.o
In this case, there is room for argument what to define for
KBUILD_MODNAME when foo-bar-common.o is being compiled.
"foo", "bar", or what else?
One idea is to define colon-separated modules that share the object,
in this case, "bar:foo" (modules are sorted alphabetically by
$(sort ...)).
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Cao jin <caoj.fnst@cn.fujitsu.com>
In the context ...
$(obj)/%.s: $(src)/%.c FORCE
$(call if_changed_dep,cc_s_c)
$(obj)/%.i: $(src)/%.c FORCE
$(call if_changed_dep,cpp_i_c)
$(obj)/%.o: $(src)/%.c $(recordmcount_source) $(objtool_dep) FORCE
$(call cmd,force_checksrc)
$(call if_changed_rule,cc_o_c)
$(obj)/%.lst: $(src)/%.c FORCE
$(call if_changed_dep,cc_lst_c)
'$*' returns the stem of the target (the part of '%'), so $(obj)/ has
already been ripped off.
$(subst $(obj)/,,$*.o) is the same as $*.o
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Cao jin <caoj.fnst@cn.fujitsu.com>
stat(1) is not standardized and different implementations have their own
(conflicting) flags for querying the size of a file.
ls(1) provides the same information (value of st.st_size) in the 5th
column, except when the file is a character or block device. This output
is standardized[0]. The -n option turns on -l, which writes lines
formatted like
"%s %u %s %s %u %s %s\n", <file mode>, <number of links>,
<owner name>, <group name>, <size>, <date and time>,
<pathname>
but instead of writing the <owner name> and <group name>, it writes the
numeric owner and group IDs (this avoids /etc/passwd and /etc/group
lookups as well as potential field splitting issues).
The <size> field is specified as "the value that would be returned for
the file in the st_size field of struct stat".
To avoid duplicating logic in several locations in the tree, create
scripts/file-size.sh and update callers to use that instead of stat(1).
[0] http://pubs.opengroup.org/onlinepubs/9699919799/utilities/ls.html#tag_20_73_10
Signed-off-by: Michael Forney <forney@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The idea of using fixdep was inspired by Kconfig, but autoksyms
belongs to a different group. So, I want to move those touched
files under include/config/ksym/ to include/ksym/.
The directory include/ksym/ can be removed by 'make clean' because
it is meaningless for the external module building.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Commit d3fc425e81 ("kbuild: make sure autoksyms.h exists early")
moved the code that touches autoksyms.h to scripts/kconfig/Makefile
with obscure reason.
From Nicolas' comment [1], he did not seem to be sure about the root
cause.
I guess I figured it out, so here is a fix-up I think is more correct.
According to the error log in the original post [2], the build failed
in scripts/mod/devicetable-offsets.c
scripts/mod/Makefile is descended from scripts/Makefile, which is
invoked from the top-level Makefile by the 'scripts' target.
To build vmlinux and/or modules, Kbuild descend into $(vmlinux-dirs).
This depends on 'prepare' and 'scripts' as follows:
$(vmlinux-dirs): prepare scripts
Because there is no dependency between 'prepare' and 'scripts', the
parallel building can execute them simultaneously.
'prepare' depends on 'prepare1', which touched autoksyms.h, while
'scripts' descends into script/, then scripts/mod/, which needs
<generated/autoksyms.h> if CONFIG_TRIM_UNUSED_KSYMS. It was the
reason of the race.
I am not happy to have unrelated code in the Kconfig Makefile, so
getting it back to the top Makefile.
I removed the standalone test target because I want to use it to
create an empty autoksyms.h file. Here is a little improvement;
unnecessary autoksyms.h is not created when CONFIG_TRIM_UNUSED_KSYMS
is disabled.
[1] https://lkml.org/lkml/2016/11/30/734
[2] https://lkml.org/lkml/2016/11/30/531
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
The comment mentions it creates autoksyms.h in case it is missing,
but the actual code touches it when it does exists.
The build system creates it anyway because <linux/export.h> and
<asm-generic/export.h> need it.
The code would not have worked as intended, and people have not
noticed it. This is a proof that we can simply remove it.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Currently, linker options are tested by the coordination of $(CC) and
$(LD) because $(LD) needs some object to link.
As commit 86a9df597c ("kbuild: fix linker feature test macros when
cross compiling with Clang") addressed, we need to make sure $(CC)
and $(LD) agree the underlying architecture of the passed object.
This could be a bit complex when we combine tools from different groups.
For example, we can use clang for $(CC), but we still need to rely on
GCC toolchain for $(LD).
So, I was searching for a way of standalone testing of linker options.
A trick I found is to use '-v'; this not only prints the version string,
but also tests if the given option is recognized.
If a given option is supported,
$ aarch64-linux-gnu-ld -v --fix-cortex-a53-843419
GNU ld (Linaro_Binutils-2017.11) 2.28.2.20170706
$ echo $?
0
If unsupported,
$ aarch64-linux-gnu-ld -v --fix-cortex-a53-843419
GNU ld (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) 2.23.1
aarch64-linux-gnu-ld: unrecognized option '--fix-cortex-a53-843419'
aarch64-linux-gnu-ld: use the --help option for usage information
$ echo $?
1
Gold works likewise.
$ aarch64-linux-gnu-ld.gold -v --fix-cortex-a53-843419
GNU gold (Linaro_Binutils-2017.11 2.28.2.20170706) 1.14
masahiro@pug:~/ref/linux$ echo $?
0
$ aarch64-linux-gnu-ld.gold -v --fix-cortex-a53-999999
GNU gold (Linaro_Binutils-2017.11 2.28.2.20170706) 1.14
aarch64-linux-gnu-ld.gold: --fix-cortex-a53-999999: unknown option
aarch64-linux-gnu-ld.gold: use the --help option for usage information
$ echo $?
1
LLD too.
$ ld.lld -v --gc-sections
LLD 7.0.0 (http://llvm.org/git/lld.git 4a0e4190e74cea19f8a8dc625ccaebdf8b5d1585) (compatible with GNU linkers)
$ echo $?
0
$ ld.lld -v --fix-cortex-a53-843419
LLD 7.0.0 (http://llvm.org/git/lld.git 4a0e4190e74cea19f8a8dc625ccaebdf8b5d1585) (compatible with GNU linkers)
$ echo $?
0
$ ld.lld -v --fix-cortex-a53-999999
ld.lld: error: unknown argument: --fix-cortex-a53-999999
LLD 7.0.0 (http://llvm.org/git/lld.git 4a0e4190e74cea19f8a8dc625ccaebdf8b5d1585) (compatible with GNU linkers)
$ echo $?
1
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Incremental linking is gone, so rename built-in.o to built-in.a, which
is the usual extension for archive files.
This patch does two things, first is a simple search/replace:
git grep -l 'built-in\.o' | xargs sed -i 's/built-in\.o/built-in\.a/g'
The second is to invert nesting of nested text manipulations to avoid
filtering built-in.a out from libs-y2:
-libs-y2 := $(filter-out %.a, $(patsubst %/, %/built-in.a, $(libs-y)))
+libs-y2 := $(patsubst %/, %/built-in.a, $(filter-out %.a, $(libs-y)))
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This removes the old `ld -r` incremental link option, which has not
been selected by any architecture since June 2017.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* Use BREs where EREs aren't necessary.
* Pass -E instead of -r to use EREs. This will be standardized in the
next POSIX revision[0]. GNU sed supports this since 4.2 (May 2009),
and busybox since 1.22.0 (Jan 2014).
* Use the [:space:] character class instead of ` \t` in bracket
expressions. In bracket expressions, POSIX says that <backslash> loses
its special meaning, so a conforming implementation cannot expand \t
to <tab>[1].
* In BREs, use interval expressions (\{n,m\}) instead of non-standard
features like \+ and \?.
* Use a loop instead of -s flag.
There are still plenty of other cases of non-standard sed invocations
(use of ERE features in BREs, in-place editing), but this fixes some
core ones.
[0] http://austingroupbugs.net/view.php?id=528
[1] http://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap09.html#tag_09_03_05
Signed-off-by: Michael Forney <forney@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Based on gcc-version.sh, clang-version.sh prints out the correct
version of clang.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This patch remove the compatibility aliases
drm_property_{reference/unreference}_blob of
drm_property_blob_{get/put} since all callers have been converted to the
prefered _{get/put}.
Remove the helpers from the semantic patch drm-get-put-cocci.
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180320133749.GA11695@haneen-VirtualBox
I find the __sched annotations unaesthetic in the kernel-doc. Remove
them like we remove __inline, __weak, __init and so on.
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Some filesystems have timestamps with coarse precision that may allow
for a recently built object file to have the same timestamp as the
updated time on one of its dependency files. When that happens, the
object file doesn't get rebuilt as it should.
This is especially the case on filesystems that don't have sub-second
time precision, such as ext3 or Ext4 with 128B inodes.
Let's prevent that by making sure updated dependency files have a newer
timestamp than the first file we created (i.e. autoksyms.h.tmpnew).
Reported-by: Thomas Lindroth <thomas.lindroth@gmail.com>
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Tested-by: Thomas Lindroth <thomas.lindroth@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This patch remove the compatibility aliases
drm_mode_object_{reference/unreference} of drm_mode_object_{get/put}
since all callers have been converted to the prefered _{get/put}.
Remove the helpers from the semantic patch drm-get-put-cocci.
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180319055820.GA17502@haneen-VirtualBox
The Analog Devices Blackfin port was added in 2007 and was rather
active for a while, but all work on it has come to a standstill
over time, as Analog have changed their product line-up.
Aaron Wu confirmed that the architecture port is no longer relevant,
and multiple people suggested removing blackfin independently because
of some of its oddities like a non-working SMP port, and the amount of
duplication between the chip variants, which cause extra work when
doing cross-architecture changes.
Link: https://docs.blackfin.uclinux.org/
Acked-by: Aaron Wu <Aaron.Wu@analog.com>
Acked-by: Bryan Wu <cooloney@gmail.com>
Cc: Steven Miao <realmz6@gmail.com>
Cc: Mike Frysinger <vapier@chromium.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
cmd_dt_S_dtb constructs the assembly source to incorporate a devicetree
FDT (that is, the .dtb file) as binary data in the kernel image. This
assembly source contains labels before and after the binary data. The
label names incorporate the file name of the corresponding .dtb file.
Hyphens are not legal characters in labels, so .dtb files built into the
kernel with hyphens in the file name result in errors like the
following:
bcm3368-netgear-cvg834g.dtb.S: Assembler messages:
bcm3368-netgear-cvg834g.dtb.S:5: Error: : no such section
bcm3368-netgear-cvg834g.dtb.S:5: Error: junk at end of line, first unrecognized character is `-'
bcm3368-netgear-cvg834g.dtb.S:6: Error: unrecognized opcode `__dtb_bcm3368-netgear-cvg834g_begin:'
bcm3368-netgear-cvg834g.dtb.S:8: Error: unrecognized opcode `__dtb_bcm3368-netgear-cvg834g_end:'
bcm3368-netgear-cvg834g.dtb.S:9: Error: : no such section
bcm3368-netgear-cvg834g.dtb.S:9: Error: junk at end of line, first unrecognized character is `-'
Fix this by updating cmd_dt_S_dtb to transform all hyphens from the file
name to underscores when constructing the labels.
As of v4.16-rc2, 1139 .dts files across ARM64, ARM, MIPS and PowerPC
contain hyphens in their names, but the issue only currently manifests
on Broadcom MIPS platforms, as that is the only place where such files
are built into the kernel. For example when CONFIG_DT_NETGEAR_CVG834G=y,
or on BMIPS kernels when the dtbs target is used (in the latter case it
admittedly shouldn't really build all the dtb.o files, but thats a
separate issue).
Fixes: 695835511f ("MIPS: BMIPS: rename bcm96358nb4ser to bcm6358-neufbox4-sercom")
Signed-off-by: James Hogan <jhogan@kernel.org>
Reviewed-by: Frank Rowand <frowand.list@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: <stable@vger.kernel.org> # 4.9+
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The bloat-o-meter script has two typos in the help, fix both.
Fixes: 192efb7a1f ("bloat-o-meter: provide 3 different arguments for data, function and All")
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
These patches remove the metag architecture and tightly dependent
drivers from the kernel. With the 4.16 kernel the ancient gcc 4.2.4
based metag toolchain we have been using is hitting compiler bugs, so
now seems a good time to drop it altogether.
-----BEGIN PGP SIGNATURE-----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=zDIl
-----END PGP SIGNATURE-----
Merge tag 'metag_remove_2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jhogan/metag into asm-generic
Remove metag architecture
These patches remove the metag architecture and tightly dependent
drivers from the kernel. With the 4.16 kernel the ancient gcc 4.2.4
based metag toolchain we have been using is hitting compiler bugs, so
now seems a good time to drop it altogether.
* tag 'metag_remove_2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jhogan/metag:
i2c: img-scb: Drop METAG dependency
media: img-ir: Drop METAG dependency
watchdog: imgpdc: Drop METAG dependency
MAINTAINERS/CREDITS: Drop METAG ARCHITECTURE
tty: Remove metag DA TTY and console driver
clocksource: Remove metag generic timer driver
irqchip: Remove metag irqchip drivers
Drop a bunch of metag references
docs: Remove remaining references to metag
docs: Remove metag docs
metag: Remove arch/metag/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
On arm64, the EFI stub and the kernel proper are essentially the same
binary, although the EFI stub executes at a different virtual address
as the kernel. For this reason, the EFI stub is restricted in the
symbols it can link to, which is ensured by prefixing all EFI stub
symbols with __efistub_ (and emitting __efistub_ prefixed aliases for
routines that may be shared between the core kernel and the stub)
These symbols are leaking into kallsyms, polluting the namespace, so
let's filter them explicitly.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The latest dtc update adds some new noisy warnings, so turn them off by
default. Disable 'avoid_unnecessary_addr_size' and 'alias_paths'. They
can be re-enabled by building with 'W=1'.
Signed-off-by: Rob Herring <robh@kernel.org>
This adds the following commits from upstream:
aadd0b65c987 checks: centralize printing of property names in failure messages
88960e398907 checks: centralize printing of node path in check_msg
f1879e1a50eb Add limited read-only support for older (V2 and V3) device tree to libfdt.
37dea76e9700 srcpos: drop special handling of tab
65893da4aee0 libfdt: overlay: Add missing license
962a45ca034d Avoid installing pylibfdt when dependencies are missing
cd6ea1b2bea6 Makefile: Split INSTALL out into INSTALL_{PROGRAM,LIB,DATA,SCRIPT}
51b3a16338df Makefile.tests: Add LIBDL make(1) variable for portability sake
333d533a8f4d Attempt to auto-detect stat(1) being used if not given proper invocation
e54388015af1 dtc: Bump version to v1.4.6
a1fe86f380cb fdtoverlay: Switch from using alloca to malloc
c8d5472de3ff tests: Improve compatibility with other platforms
c81d389a10cc checks: add chosen node checks
e671852042a7 checks: add aliases node checks
d0c44ebe3f42 checks: check for #{size,address}-cells without child nodes
18a3d84bb802 checks: add string list check for *-names properties
8fe94fd6f19f checks: add string list check
6c5730819604 checks: add a string check for 'label' property
a384191eba09 checks: fix sound-dai phandle with arg property check
b260c4f610c0 Fix ambiguous grammar for devicetree rule
fe667e382bac tests: Add some basic tests for the pci_bridge checks
7975f6422260 Fix widespread incorrect use of strneq(), replace with new strprefixeq()
fca296445eab Add strstarts() helper function
cc392f089007 tests: Check non-matching cases for fdt_node_check_compatible()
bba26a5291c8 livetree: avoid assertion of orphan phandles with overlays
c8f8194d76cc implement strnlen for systems that need it
c8b38f65fdec libfdt: Remove leading underscores from identifiers
3b62fdaebfe5 Remove leading underscores from identifiers
2d45d1c5c65e Replace FDT_VERSION() with stringify()
2e6fe5a107b5 Fix some errors in comments
b0ae9e4b0ceb tests: Correct warning in sw_tree1.c
Commit c8b38f65fdec upstream ("libfdt: Remove leading underscores from
identifiers") changed the multiple inclusion define protection, so the
kernel's libfdt_env.h needs the corresponding update.
Signed-off-by: Rob Herring <robh@kernel.org>
Now that the kernel build supports flex and bison, remove the _shipped
files and generate them during the build instead.
Based on Masahiro's original patch.
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Rob Herring <robh@kernel.org>
kconfig.h was excluded from consideration by fixdep by
6a5be57f0f (fixdep: fix extraneous dependencies) to avoid some false
positive hits
(1) include/config/.h
(2) include/config/h.h
(3) include/config/foo.h
(1) occurred because kconfig.h contains the string CONFIG_ in a
comment. However, since dee81e9886 (fixdep: faster CONFIG_ search), we
have a check that the part after CONFIG_ is non-empty, so this does not
happen anymore (and CONFIG_ appears by itself elsewhere, so that check
is worthwhile).
(2) comes from the include guard, __LINUX_KCONFIG_H. But with the
previous patch, we no longer match that either.
That leaves (3), which amounts to one [1] false dependency (aka stat() call
done by make), which I think we can live with:
We've already had one case [2] where the lack of include/linux/kconfig.h in
the .o.cmd file caused a missing rebuild, and while I originally thought
we should just put kconfig.h in the dependency list without parsing it
for the CONFIG_ pattern, we actually do have some real CONFIG_ symbols
mentioned in it, and one can imagine some translation unit that just
does '#ifdef __BIG_ENDIAN' but doesn't through some other header
actually depend on CONFIG_CPU_BIG_ENDIAN - so changing the target
endianness could end up rebuilding the world, minus that small
TU. Quoting Linus,
... when missing dependencies cause a missed re-compile, the resulting
bugs can be _really_ subtle.
[1] well, two, we now also have CONFIG_BOOGER/booger.h - we could change
that to FOO if we care
[2] https://lkml.org/lkml/2018/2/22/838
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The string CONFIG_ quite often appears after other alphanumerics,
meaning that that instance cannot be referencing a Kconfig
symbol. Omitting these means make has fewer files to stat() when
deciding what needs to be rebuilt - for a defconfig build, this seems to
remove about 2% of the (wildcard ...) lines from the .o.cmd files.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
uml-config.h hasn't existed in this decade (87e299e5c7 - x86, um: get
rid of uml-config.h). The few remaining UML_CONFIG instances are defined
directly in terms of their real CONFIG symbol in common-offsets.h, so
unlike when the symbols got defined via a sed script, anything that uses
UML_CONFIG_FOO now should also automatically pick up a dependency on
CONFIG_FOO via the normal fixdep mechanism (since common-offsets.h
should at least recursively be a dependency). Hence I believe we should
actually be able to ignore the HELLO_CONFIG_BOOM cases.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Richard Weinberger <richard@nod.at>
Cc: user-mode-linux-devel@lists.sourceforge.net
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
- suppress sparse warnings about unknown attributes
- fix typos and stale comments
- fix build error of arch/sh
- fix wrong use of ld-option vs cc-ldoption
- remove redundant GCC_PLUGINS_CFLAGS assignment
- fix another memory leak of Kconfig
- fix line number in error messages of Kconfig
- do not write confusing CONFIG_DEFCONFIG_LIST out to .config
- add xstrdup() to Kconfig to handle memory shortage errors
- show also a Debian package name if ncurses is missing
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=sr4l
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- suppress sparse warnings about unknown attributes
- fix typos and stale comments
- fix build error of arch/sh
- fix wrong use of ld-option vs cc-ldoption
- remove redundant GCC_PLUGINS_CFLAGS assignment
- fix another memory leak of Kconfig
- fix line number in error messages of Kconfig
- do not write confusing CONFIG_DEFCONFIG_LIST out to .config
- add xstrdup() to Kconfig to handle memory shortage errors
- show also a Debian package name if ncurses is missing
* tag 'kbuild-fixes-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
MAINTAINERS: take over Kconfig maintainership
kconfig: fix line number in recursive inclusion error message
Coccinelle: memdup: Fix typo in warning messages
kconfig: Update ncurses package names for menuconfig
kbuild/kallsyms: trivial typo fix
kbuild: test --build-id linker flag by ld-option instead of cc-ldoption
kbuild: drop superfluous GCC_PLUGINS_CFLAGS assignment
kconfig: Don't leak choice names during parsing
sh: fix build error for empty CONFIG_BUILTIN_DTB_SOURCE
kconfig: set SYMBOL_AUTO to the symbol marked with defconfig_list
kconfig: add xstrdup() helper
kbuild: disable sparse warnings about unknown attributes
Makefile: Fix lying comment re. silentoldconfig
When recursive inclusion is detected, the line number of the last
'included from:' is wrong.
[Test Case]
Kconfig:
-------->8--------
source "Kconfig2"
-------->8--------
Kconfig2:
-------->8--------
source "Kconfig3"
-------->8--------
Kconfig3:
-------->8--------
source "Kconfig"
-------->8--------
[Result]
$ make allyesconfig
scripts/kconfig/conf --allyesconfig Kconfig
Kconfig:1: recursive inclusion detected. Inclusion path:
current file : 'Kconfig'
included from: 'Kconfig3:1'
included from: 'Kconfig2:1'
included from: 'Kconfig:3'
scripts/kconfig/Makefile:89: recipe for target 'allyesconfig' failed
make[1]: *** [allyesconfig] Error 1
Makefile:512: recipe for target 'allyesconfig' failed
make: *** [allyesconfig] Error 2
where we expect
current file : 'Kconfig'
included from: 'Kconfig3:1'
included from: 'Kconfig2:1'
included from: 'Kconfig:1'
The 'iter->lineno+1' in the second fpinrtf() should be 'iter->lineno-1'.
I refactored the code to merge the two fprintf() calls.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
The package name is ncurses-devel for Redhat based distros
and libncurses-dev for Debian based distros.
Signed-off-by: Arvind Prasanna <arvindprasanna@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
GCC_PLUGINS_CFLAGS is already in the environment, so it is superfluous
to add it in commandline of final build of init/.
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The named choice is not used in the kernel tree, but if it were used,
it would not be freed.
The intention of the named choice can be seen in the log of
commit 5a1aa8a1af ("kconfig: add named choice group").
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
The 'defconfig_list' is a weird attribute. If the '.config' is
missing, conf_read_simple() iterates over all visible defaults,
then it uses the first one for which fopen() succeeds.
config DEFCONFIG_LIST
string
depends on !UML
option defconfig_list
default "/lib/modules/$UNAME_RELEASE/.config"
default "/etc/kernel-config"
default "/boot/config-$UNAME_RELEASE"
default "$ARCH_DEFCONFIG"
default "arch/$ARCH/defconfig"
However, like other symbols, the first visible default is always
written out to the .config file. This might be different from what
has been actually used.
For example, on my machine, the third one "/boot/config-$UNAME_RELEASE"
is opened, like follows:
$ rm .config
$ make oldconfig 2>/dev/null
scripts/kconfig/conf --oldconfig Kconfig
#
# using defaults found in /boot/config-4.4.0-112-generic
#
*
* Restart config...
*
*
* IRQ subsystem
*
Expose irq internals in debugfs (GENERIC_IRQ_DEBUGFS) [N/y/?] (NEW)
However, the resulted .config file contains the first one since it is
visible:
$ grep CONFIG_DEFCONFIG_LIST .config
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
In order to stop confusing people, prevent this CONFIG option from
being written to the .config file.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
We can re-enable some dtc warnings that have been completely or mostly
fixed. There are a few remaining ones in arm64 dts files which crept in
recently.
Signed-off-by: Rob Herring <robh@kernel.org>
If dtc is rebuilt, we should rebuild .dtb files with the new dtc.
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Commit eea199b445 ("kbuild: remove unnecessary LEX_PREFIX and
YACC_PREFIX") removed YACC_PREFIX definition, but left one use of it. There
was not any build error since there is no user of "cmd_bison_h" currently.
Remove the last remaining occurrence of YACC_PREFIX.
Fixes: eea199b445 ("kbuild: remove unnecessary LEX_PREFIX and YACC_PREFIX")
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Rob Herring <robh@kernel.org>
We already have xmalloc(), xcalloc(), and xrealloc((). Add xstrdup()
as well to save tedious error handling.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Now that arch/metag/ has been removed, drop a bunch of metag references
in various codes across the whole tree:
- VM_GROWSUP and __VM_ARCH_SPECIFIC_1.
- MT_METAG_* ELF note types.
- METAG Kconfig dependencies (FRAME_POINTER) and ranges
(MAX_STACK_SIZE_MB).
- metag cases in tools (checkstack.pl, recordmcount.c, perf).
Signed-off-by: James Hogan <jhogan@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linux-mm@kvack.org
Cc: linux-metag@vger.kernel.org
Disable retpoline validation in objtool if your compiler sucks, and otherwise
select the validation stuff for CONFIG_RETPOLINE=y (most builds would already
have it set due to ORC).
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
David allowed retpolines in .init.text, except for modules, which will
trip up objtool retpoline validation, fix that.
Requested-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
David requested a objtool validation pass for CONFIG_RETPOLINE=y enabled
builds, where it validates no unannotated indirect jumps or calls are
left.
Add an additional .discard.retpoline_safe section to allow annotating
the few indirect sites that are required and safe.
Requested-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
So once upon a time I set out to fix the problem reported by Tobin wherein
a literal block within a kerneldoc comment would be corrupted in
processing. On the way, though, I got annoyed at the way I have to learn
how kernel-doc works from the beginning every time I tear into it.
As a result, seven of the following eight patches just get rid of some dead
code and reorganize the rest - mostly turning the 500-line process_file()
function into something a bit more rational. Sphinx output is unchanged
after these are applied. Then, at the end, there's a tweak to stop messing
with literal blocks.
If anybody was unaware that I've not done any serious Perl since the
1990's, they will certainly understand that fact now.
Add the SPDX header while I'm in the neighborhood. The source itself just
says "GNU General Public License", but it also refers people to the COPYING
file for further information. Since COPYING says 2.0-only, that is what I
have put into the header.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The parser at kernel-doc rejects names with dots in the middle.
Fix it, in order to support nested structs/unions.
Tested-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
When function description includes brackets after the function name as
suggested by Documentation/doc-guide/kernel-doc, the kernel-doc script
omits the function name from "Scanning doc for" report.
Extending match for identifier name with optional brackets fixes this
issue.
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
It can be useful to put code snippets into kerneldoc comments; that can be
done with the "::" operator at the end of a line like this::
if (desperate)
run_in_circles();
The ".. code-block::" directive can also be used to this end. kernel-doc
currently fails to understand these literal blocks and applies its normal
markup to them, which is then treated as literal by sphinx. The result is
unsightly markup instead of a useful code snippet.
Apply a hack to the output code to recognize literal blocks and avoid
performing any special markup on them. It's ugly, but that means it fits
in well with the rest of the script.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Move STATE_INLINE and STATE_DOCBLOCK code out of process_file(), which now
actually fits on a single screen. Delete an unused variable and add a
couple of comments while I'm at it.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Move the top-level prototype-processing code out of process_file().
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Also group the pseudo-global $leading_space variable with its peers.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Move this code out of process_file() in the name of readability and
maintainability.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Begin the process of splitting up the nearly 500-line process_file()
function by moving STATE_NORMAL processing to a separate function.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
STATE_FIELD describes a parser state that can handle any part of a
kerneldoc comment body; rename it to STATE_BODY to reflect that.
The $in_purpose variable was a hidden substate of STATE_FIELD; get rid of
it and make a proper state (STATE_BODY_MAYBE) instead. This will make the
subsequent process_file() splitup easier.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
XML escaping is a worry that came with DocBook, which we no longer have any
dealings with. So get rid of the useless xml_escape()/xml_unescape()
functions. No change to the generated output.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Instead of asking the user to copy and paste a small perl script from
the documentation, just distribute the perl script in the scripts
directory.
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Makefile changes:
- enable unused-variable warning that was wrongly disabled for clang
Kconfig changes:
- warn blank 'help' and fix existing instances
- fix 'choice' behavior to not write out invisible symbols
- fix misc weirdness
Coccinell changes:
- fix false positive of free after managed memory alloc detection
- improve performance of NULL dereference detection
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=jy5l
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
"Makefile changes:
- enable unused-variable warning that was wrongly disabled for clang
Kconfig changes:
- warn about blank 'help' and fix existing instances
- fix 'choice' behavior to not write out invisible symbols
- fix misc weirdness
Coccinell changes:
- fix false positive of free after managed memory alloc detection
- improve performance of NULL dereference detection"
* tag 'kbuild-v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (21 commits)
kconfig: remove const qualifier from sym_expand_string_value()
kconfig: add xrealloc() helper
kconfig: send error messages to stderr
kconfig: echo stdin to stdout if either is redirected
kconfig: remove check_stdin()
kconfig: remove 'config*' pattern from .gitignnore
kconfig: show '?' prompt even if no help text is available
kconfig: do not write choice values when their dependency becomes n
coccinelle: deref_null: avoid useless computation
coccinelle: devm_free: reduce false positives
kbuild: clang: disable unused variable warnings only when constant
kconfig: Warn if help text is blank
nios2: kconfig: Remove blank help text
arm: vt8500: kconfig: Remove blank help text
MIPS: kconfig: Remove blank help text
MIPS: BCM63XX: kconfig: Remove blank help text
lib/Kconfig.debug: Remove blank help text
Staging: rtl8192e: kconfig: Remove blank help text
Staging: rtl8192u: kconfig: Remove blank help text
mmc: kconfig: Remove blank help text
...
This function returns realloc'ed memory, so the returned pointer
must be passed to free() when done. So, 'const' qualifier is odd.
It is allowed to modify the expanded string.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
We already have xmalloc(), xcalloc(). Add xrealloc() as well
to save tedious error handling.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
These messages should be directed to stderr.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
If stdio is not tty, conf_askvalue() puts additional new line to
prevent prompts from being concatenated into a single line. This
care is missing in conf_choice(), so a 'choice' prompt and the next
prompt are shown in the same line.
Move the code into xfgets() to cater to all cases. To improve this
more, let's echo stdin to stdout. This clarifies what keys were
input from stdio and the stdout looks like as if it were from tty.
I removed the isatty(2) check since stderr is unrelated here.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
Except silentoldconfig, valid_stdin is 1, so check_stdin() is no-op.
oldconfig and silentoldconfig work almost in the same way except that
the latter generates additional files under include/. Both ask users
for input for new symbols.
I do not know why only silentoldconfig requires stdio be tty.
$ rm -f .config; touch .config
$ yes "" | make oldconfig > stdout
$ rm -f .config; touch .config
$ yes "" | make silentoldconfig > stdout
make[1]: *** [silentoldconfig] Error 1
make: *** [silentoldconfig] Error 2
$ tail -n 4 stdout
Console input/output is redirected. Run 'make oldconfig' to update configuration.
scripts/kconfig/Makefile:40: recipe for target 'silentoldconfig' failed
Makefile:507: recipe for target 'silentoldconfig' failed
Redirection is useful, for example, for testing where we want to give
particular key inputs from a test file, then check the result.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
I could not figure out why this pattern should be ignored.
Checking commit 1e65174a33 ("Add some basic .gitignore files")
did not help.
Let's remove this pattern, then see if it is really needed.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
'make config', 'make oldconfig', etc. always receive '?' as a valid
input and show useful information even if no help text is available.
------------------------>8------------------------
foo (FOO) [N/y] (NEW) ?
There is no help available for this option.
Symbol: FOO [=n]
Type : bool
Prompt: foo
Defined at Kconfig:1
------------------------>8------------------------
However, '?' is not shown in the prompt if its help text is missing.
Let's show '?' all the time so that the prompt and the behavior match.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
"# CONFIG_... is not set" for choice values are wrongly written into
the .config file if they are once visible, then become invisible later.
Test case
---------
---------------------------(Kconfig)----------------------------
config A
bool "A"
choice
prompt "Choice ?"
depends on A
config CHOICE_B
bool "Choice B"
config CHOICE_C
bool "Choice C"
endchoice
----------------------------------------------------------------
---------------------------(.config)----------------------------
CONFIG_A=y
----------------------------------------------------------------
With the Kconfig and .config above,
$ make config
scripts/kconfig/conf --oldaskconfig Kconfig
*
* Linux Kernel Configuration
*
A (A) [Y/n] n
#
# configuration written to .config
#
$ cat .config
#
# Automatically generated file; DO NOT EDIT.
# Linux Kernel Configuration
#
# CONFIG_A is not set
# CONFIG_CHOICE_B is not set
# CONFIG_CHOICE_C is not set
Here,
# CONFIG_CHOICE_B is not set
# CONFIG_CHOICE_C is not set
should not be written into the .config file because their dependency
"depends on A" is unmet.
Currently, there is no code that clears SYMBOL_WRITE of choice values.
Clear SYMBOL_WRITE for all symbols in sym_calc_value(), then set it
again after calculating visibility. To simplify the logic, set the
flag if they have non-n visibility, regardless of types, and regardless
of whether they are choice values or not.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
The effect of the rules ifm1, pr11, and pr12 is only used in the final rule,
which depends on context && !org && !report. Thus these rules should only
be performed in those circumstances.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Some files use both a non-devm allocation and a devm_allocation. Don't
complain about a free when the same function contains a non-devm
allocation.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
We get a lot of very large stack frames using gcc-7.0.1 with the default
-fsanitize-address-use-after-scope --param asan-stack=1 options, which can
easily cause an overflow of the kernel stack, e.g.
drivers/gpu/drm/i915/gvt/handlers.c:2434:1: warning: the frame size of 46176 bytes is larger than 3072 bytes
drivers/net/wireless/ralink/rt2x00/rt2800lib.c:5650:1: warning: the frame size of 23632 bytes is larger than 3072 bytes
lib/atomic64_test.c:250:1: warning: the frame size of 11200 bytes is larger than 3072 bytes
drivers/gpu/drm/i915/gvt/handlers.c:2621:1: warning: the frame size of 9208 bytes is larger than 3072 bytes
drivers/media/dvb-frontends/stv090x.c:3431:1: warning: the frame size of 6816 bytes is larger than 3072 bytes
fs/fscache/stats.c:287:1: warning: the frame size of 6536 bytes is larger than 3072 bytes
To reduce this risk, -fsanitize-address-use-after-scope is now split out
into a separate CONFIG_KASAN_EXTRA Kconfig option, leading to stack
frames that are smaller than 2 kilobytes most of the time on x86_64. An
earlier version of this patch also prevented combining KASAN_EXTRA with
KASAN_INLINE, but that is no longer necessary with gcc-7.0.1.
All patches to get the frame size below 2048 bytes with CONFIG_KASAN=y
and CONFIG_KASAN_EXTRA=n have been merged by maintainers now, so we can
bring back that default now. KASAN_EXTRA=y still causes lots of
warnings but now defaults to !COMPILE_TEST to disable it in
allmodconfig, and it remains disabled in all other defconfigs since it
is a new option. I arbitrarily raise the warning limit for KASAN_EXTRA
to 3072 to reduce the noise, but an allmodconfig kernel still has around
50 warnings on gcc-7.
I experimented a bit more with smaller stack frames and have another
follow-up series that reduces the warning limit for 64-bit architectures
to 1280 bytes (without CONFIG_KASAN).
With earlier versions of this patch series, I also had patches to address
the warnings we get with KASAN and/or KASAN_EXTRA, using a
"noinline_if_stackbloat" annotation.
That annotation now got replaced with a gcc-8 bugfix (see
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81715) and a workaround for
older compilers, which means that KASAN_EXTRA is now just as bad as
before and will lead to an instant stack overflow in a few extreme
cases.
This reverts parts of commit 3f181b4d86 ("lib/Kconfig.debug: disable
-Wframe-larger-than warnings with KASAN=y"). Two patches in linux-next
should be merged first to avoid introducing warnings in an allmodconfig
build:
3cd890dbe2 ("media: dvb-frontends: fix i2c access helpers for KASAN")
16c3ada89c ("media: r820t: fix r820t_write_reg for KASAN")
Do we really need to backport this?
I think we do: without this patch, enabling KASAN will lead to
unavoidable kernel stack overflow in certain device drivers when built
with gcc-7 or higher on linux-4.10+ or any version that contains a
backport of commit c5caf21ab0. Most people are probably still on
older compilers, but it will get worse over time as they upgrade their
distros.
The warnings we get on kernels older than this should all be for code
that uses dangerously large stack frames, though most of them do not
cause an actual stack overflow by themselves.The asan-stack option was
added in linux-4.0, and commit 3f181b4d86 ("lib/Kconfig.debug:
disable -Wframe-larger-than warnings with KASAN=y") effectively turned
off the warning for allmodconfig kernels, so I would like to see this
fix backported to any kernels later than 4.0.
I have done dozens of fixes for individual functions with stack frames
larger than 2048 bytes with asan-stack, and I plan to make sure that
all those fixes make it into the stable kernels as well (most are
already there).
Part of the complication here is that asan-stack (from 4.0) was
originally assumed to always require much larger stacks, but that
turned out to be a combination of multiple gcc bugs that we have now
worked around and fixed, but sanitize-address-use-after-scope (from
v4.10) has a much higher inherent stack usage and also suffers from at
least three other problems that we have analyzed but not yet fixed
upstream, each of them makes the stack usage more severe than it should
be.
Link: http://lkml.kernel.org/r/20171221134744.2295529-1-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Similarly to type mismatch checks, new GCC 8.x and Clang also changed for
ABI for returns_nonnull checks. While we can update our code to conform
the new ABI it's more reasonable to just remove it. Because it's just
dead code, we don't have any single user of returns_nonnull attribute in
the whole kernel.
And AFAIU the advantage that this attribute could bring would be mitigated
by -fno-delete-null-pointer-checks cflag that we use to build the kernel.
So it's unlikely we will have a lot of returns_nonnull attribute in
future.
So let's just remove the code, it has no use.
[aryabinin@virtuozzo.com: fix warning]
Link: http://lkml.kernel.org/r/20180122165711.11510-1-aryabinin@virtuozzo.com
Link: http://lkml.kernel.org/r/20180119152853.16806-2-aryabinin@virtuozzo.com
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Sodagudi Prasad <psodagud@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some structure definitions that use macros trip the OPEN_BRACE test.
e.g. +struct bpf_map_def SEC("maps") control_map = {
Improve the test by using $balanced_parens instead of a .*
Miscellanea:
o Use $sline so any comments are ignored
o Correct the message output from declaration to definition
o Remove unnecessary parentheses
Link: http://lkml.kernel.org/r/db9b772999d1d2fbda3b9ee24bbca81a87837e13.1517543491.git.joe@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Using an open bracket after what seems to be a declaration can also be a
function definition and declaration argument line continuation so remove
the open bracket from the possible declaration/definition matching.
e.g.:
int foobar(int a;
int *b[]);
Link: http://lkml.kernel.org/r/1515704479.9619.171.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Greg KH doesn't like this test so exclude the staging directory from the
implied --strict only test unless --strict is actually used on the
command-line.
Link: http://lkml.kernel.org/r/1515704034.9619.165.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
DEVICE_ATTR is a declaration macro that has a few alternate and
preferred forms like DEVICE_ATTR_RW, DEVICE_ATTR_RO, and DEVICE_ATTR.
As well, many uses of DEVICE_ATTR could use the preferred forms when the
show or store functions are also named in a regular form.
Suggest the preferred forms when appropriate.
Also emit a permissions warning if the the permissions are not the
typical 0644, 0444, or 0200.
Link: http://lkml.kernel.org/r/725864f363d91d1e1e6894a39fb57662eabd6d65.1513803306.git.joe@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Given this patch context,
+#define EFI_ST_DISK_IMG { \
+ 0x00000240, "\xbe\x5b\x7c\xac\x22\xc0\x74\x0b" /* .[|.".t. */ \
+ }
the current code misreports a quoted string line continuation defect as
there is a single quote in comment.
The 'raw' line should not be tested for quote count, the comment
substituted line should be instead.
Link: http://lkml.kernel.org/r/13f2735df10c33ca846e26f42f5cce6618157200.1513698599.git.joe@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
module_param and create_proc uses with a permissions use of a single 0 are
"special" and should not emit any warning.
module_param uses with permission 0 are not visible in sysfs
create_proc uses with permission 0 use a default permission
Link: http://lkml.kernel.org/r/b6583611bb529ea6f6d43786827fddbabbab0a71.1513190059.git.joe@perches.com
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Allow lines with URL to exceed the 80 char limit for improved interaction
in adaption to ongoing but undocumented practice.
$ git grep -E '://\S{77}.*' -- '*.[ch]'
As per RFC3986 [1], the URL format allows for alphanum, +, - and .
characters in the scheme before the separator :// as long as it starts
with a letter (e.g. https, git, f.-+).
Recognition of URIs without more context information is prone to false
positives and thus currently left out of the heuristics.
$rawline is used in the check as comments are removed from $line.
[1] https://tools.ietf.org/html/rfc3986#section-3.1
Link: http://lkml.kernel.org/r/1511355432.12667.15.camel@elementarea.net
Signed-off-by: Andreas Brauchli <andreas.brauchli@sensirion.com>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
clang's AddressSanitizer implementation adds redzones on either side of
alloca()ed buffers. These redzones are 32-byte aligned and at least 32
bytes long.
__asan_alloca_poison() is passed the size and address of the allocated
buffer, *excluding* the redzones on either side. The left redzone will
always be to the immediate left of this buffer; but AddressSanitizer may
need to add padding between the end of the buffer and the right redzone.
If there are any 8-byte chunks inside this padding, we should poison
those too.
__asan_allocas_unpoison() is just passed the top and bottom of the dynamic
stack area, so unpoisoning is simpler.
Link: http://lkml.kernel.org/r/20171204191735.132544-4-paullawrence@google.com
Signed-off-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Paul Lawrence <paullawrence@google.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
LLVM doesn't understand GCC-style paramters ("--param asan-foo=bar"), thus
we currently we don't use inline/globals/stack instrumentation when
building the kernel with clang.
Add support for LLVM-style parameters ("-mllvm -asan-foo=bar") to enable
all KASAN features.
Link: http://lkml.kernel.org/r/20171204191735.132544-3-paullawrence@google.com
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Paul Lawrence <paullawrence@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Greg Hackmann <ghackmann@google.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With KASAN enabled the kernel has two different memset() functions, one
with KASAN checks (memset) and one without (__memset). KASAN uses some
macro tricks to use the proper version where required. For example
memset() calls in mm/slub.c are without KASAN checks, since they operate
on poisoned slab object metadata.
The issue is that clang emits memset() calls even when there is no
memset() in the source code. They get linked with improper memset()
implementation and the kernel fails to boot due to a huge amount of KASAN
reports during early boot stages.
The solution is to add -fno-builtin flag for files with KASAN_SANITIZE :=
n marker.
Link: http://lkml.kernel.org/r/8ffecfffe04088c52c42b92739c2bd8a0bcb3f5e.1516384594.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
GCC 8 changed the order of some fields and is very picky about ordering
in static initializers, so instead just move to dynamic initializers,
and drop the redundant already-zero field assignments.
Suggested-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Kees Cook <keescook@chromium.org>
GCC requires another #include to get the gcc-plugins to build cleanly.
Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Kees Cook <keescook@chromium.org>
Blank help texts are probably either a typo, a Kconfig misunderstanding,
or some kind of half-committing to adding a help text (in which case a
TODO comment would be clearer, if the help text really can't be added
right away).
Best to flag them, IMO.
Example warning:
drivers/mmc/host/Kconfig:877: warning: 'MMC_TOSHIBA_PCI' defined with blank help text
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Pull printk updates from Petr Mladek:
- Add a console_msg_format command line option:
The value "default" keeps the old "[time stamp] text\n" format. The
value "syslog" allows to see the syslog-like "<log
level>[timestamp] text" format.
This feature was requested by people doing regression tests, for
example, 0day robot. They want to have both filtered and full logs
at hands.
- Reduce the risk of softlockup:
Pass the console owner in a busy loop.
This is a new approach to the old problem. It was first proposed by
Steven Rostedt on Kernel Summit 2017. It marks a context in which
the console_lock owner calls console drivers and could not sleep.
On the other side, printk() callers could detect this state and use
a busy wait instead of a simple console_trylock(). Finally, the
console_lock owner checks if there is a busy waiter at the end of
the special context and eventually passes the console_lock to the
waiter.
The hand-off works surprisingly well and helps in many situations.
Well, there is still a possibility of the softlockup, for example,
when the flood of messages stops and the last owner still has too
much to flush.
There is increasing number of people having problems with
printk-related softlockups. We might eventually need to get better
solution. Anyway, this looks like a good start and promising
direction.
- Do not allow to schedule in console_unlock() called from printk():
This reverts an older controversial commit. The reschedule helped
to avoid softlockups. But it also slowed down the console output.
This patch is obsoleted by the new console waiter logic described
above. In fact, the reschedule made the hand-off less effective.
- Deprecate "%pf" and "%pF" format specifier:
It was needed on ia64, ppc64 and parisc64 to dereference function
descriptors and show the real function address. It is done
transparently by "%ps" and "pS" format specifier now.
Sergey Senozhatsky found that all the function descriptors were in
a special elf section and could be easily detected.
- Remove printk_symbol() API:
It has been obsoleted by "%pS" format specifier, and this change
helped to remove few continuous lines and a less intuitive old API.
- Remove redundant memsets:
Sergey removed unnecessary memset when processing printk.devkmsg
command line option.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: (27 commits)
printk: drop redundant devkmsg_log_str memsets
printk: Never set console_may_schedule in console_trylock()
printk: Hide console waiter logic into helpers
printk: Add console owner and waiter logic to load balance console writes
kallsyms: remove print_symbol() function
checkpatch: add pF/pf deprecation warning
symbol lookup: introduce dereference_symbol_descriptor()
parisc64: Add .opd based function descriptor dereference
powerpc64: Add .opd based function descriptor dereference
ia64: Add .opd based function descriptor dereference
sections: split dereference_function_descriptor()
openrisc: Fix conflicting types for _exext and _stext
lib: do not use print_symbol()
irq debug: do not use print_symbol()
sysfs: do not use print_symbol()
drivers: do not use print_symbol()
x86: do not use print_symbol()
unicore32: do not use print_symbol()
sh: do not use print_symbol()
mn10300: do not use print_symbol()
...
A pretty big batch of Kconfig updates. I have to mention the lexer
and parser of Kconfig are now built from real .l and .y sources.
So, flex and bison are the requirement for building the kernel.
Both of them (unlike gperf) have been stable for a long time. This
change has been tested several weeks in linux-next, and I did not
receive any problem report about this.
Summary:
- Add checks for mistakes, like the choice default is not in
choice, help is doubled
- Document data structure and complex code
- Fix various memory leaks
- Change Makefile to build lexer and parser instead of using
pre-generated C files
- Drop 'boolean' keyword, which is equivalent to 'bool'
- Use default 'yy' prefix and remove unneeded Make variables
- Fix gettext() check for xconfig
- Announce that oldnoconfig will be finally removed
- Make 'Selected by:' and 'Implied by' readable in help and
search result
- Hide silentoldconfig from 'make help' to stop confusing people
- Fix misc things and cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=rsi/
-----END PGP SIGNATURE-----
Merge tag 'kconfig-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kconfig updates from Masahiro Yamada:
"A pretty big batch of Kconfig updates.
I have to mention the lexer and parser of Kconfig are now built from
real .l and .y sources. So, flex and bison are the requirement for
building the kernel. Both of them (unlike gperf) have been stable for
a long time. This change has been tested several weeks in linux-next,
and I did not receive any problem report about this.
Summary:
- add checks for mistakes, like the choice default is not in choice,
help is doubled
- document data structure and complex code
- fix various memory leaks
- change Makefile to build lexer and parser instead of using
pre-generated C files
- drop 'boolean' keyword, which is equivalent to 'bool'
- use default 'yy' prefix and remove unneeded Make variables
- fix gettext() check for xconfig
- announce that oldnoconfig will be finally removed
- make 'Selected by:' and 'Implied by' readable in help and search
result
- hide silentoldconfig from 'make help' to stop confusing people
- fix misc things and cleanups"
* tag 'kconfig-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (37 commits)
kconfig: Remove silentoldconfig from help and docs; fix kconfig/conf's help
kconfig: make "Selected by:" and "Implied by:" readable
kconfig: announce removal of oldnoconfig if used
kconfig: fix make xconfig when gettext is missing
kconfig: Clarify menu and 'if' dependency propagation
kconfig: Document 'if' flattening logic
kconfig: Clarify choice dependency propagation
kconfig: Document SYMBOL_OPTIONAL logic
kbuild: remove unnecessary LEX_PREFIX and YACC_PREFIX
kconfig: use default 'yy' prefix for lexer and parser
kconfig: make conf_unsaved a local variable of conf_read()
kconfig: make xfgets() really static
kconfig: make input_mode static
kconfig: Warn if there is more than one help text
kconfig: drop 'boolean' keyword
kconfig: use bool instead of boolean for type definition attributes, again
kconfig: Remove menu_end_entry()
kconfig: Document important expression functions
kconfig: Document automatic submenu creation code
kconfig: Fix choice symbol expression leak
...
- Add snap-pkg target to create Linux kernel snap package
- Make out-of-tree creation of source packages fail correctly
- Improve and fix several semantic patches
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJaczbiAAoJED2LAQed4NsGjkQP/i3/+ZCG6Ta8KDZmSnEcSKo4
9ECukdq0N24WMXAoStdStKoYEeF7wUlA85Za5E10cl9+oj0jmDkmlZvtGit8yJoc
eCCK8xeSLpHbrjY/k7Sc9ow4QpqKeOzgJzJY0PXdAKp16KCcdW0PN2OqWCvbxkdA
q/fFIm9hMUbpdsyinFQA5Wn+/8VW829ZjCdfcCLZRzH7LG2BuxQA60Hzqcu2+BcI
+C9BjP0tLIYM3V9rNcpJQBTB7mFku/SPmQ4ZERBPlc5/X2iQFeWAiNVi5oxFD/pH
7EE8uYu8mVpzhBVhYCeOxcML77/D7TjSxQugviioZN3X7AdGosyBE8hNgGRfeNIu
D1PWhwjdKvop3o0jqChcvPYdEijjxwckT5BH6m+yu07B3/TC8/J5JNg3hly0mtxk
/ynVvz6hatekBem/dQJIgyRAKNrxR1Af+XPW3phyFWBMiz2scHjX2kgPQnWaXB9m
aNtPqLzjJUVyoM1tTXgcJO1To836/yFEviZHILc1Y3oTOEVKVhvbF5W1HGq6EVJA
x+GWtx2S1IgGU5fHLEs4EqWyyazSRB1BlGWhtQXkvb+MYwuaO78Wods89KDmvApL
cybeyZhjrbAxyoin85BRKHo7iQUV0bT7tnpyLaA+J1GQqfLC5V93KoZIPhpziMbC
LQBYkyhCNzaPLK2pkqek
=WSoN
-----END PGP SIGNATURE-----
Merge tag 'kbuild-misc-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild misc updates from Masahiro Yamada:
- add snap-pkg target to create Linux kernel snap package
- make out-of-tree creation of source packages fail correctly
- improve and fix several semantic patches
* tag 'kbuild-misc-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
Coccinelle: coccicheck: fix typo
Coccinelle: memdup: drop spurious line
Coccinelle: kzalloc-simple: Rename kzalloc-simple to zalloc-simple
Coccinelle: ifnullfree: Trim the warning reported in report mode
Coccinelle: alloc_cast: Add more memory allocating functions to the list
Coccinelle: array_size: report even if include is missing
Coccinelle: kzalloc-simple: Add all zero allocating functions
kbuild: pkg: make out-of-tree rpm/deb-pkg build immediately fail
scripts/package: snap-pkg target
- Terminate the build correctly in case of fixdep errors
- Clean up fixdep
- Suppress packed-not-aligned warnings from GCC-8
- Fix W= handling for extra DTC warnings
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=J/JF
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- terminate the build correctly in case of fixdep errors
- clean up fixdep
- suppress packed-not-aligned warnings from GCC-8
- fix W= handling for extra DTC warnings
* tag 'kbuild-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: fix W= option checks for extra DTC warnings
Kbuild: suppress packed-not-aligned warning for default setting only
fixdep: use existing helper to check modular CONFIG options
fixdep: refactor parse_dep_file()
fixdep: move global variables to local variables of main()
fixdep: remove unneeded memcpy() in parse_dep_file()
fixdep: factor out common code for reading files
fixdep: use malloc() and read() to load dep_file to buffer
fixdep: remove unnecessary <arpa/inet.h> inclusion
fixdep: exit with error code in error branches of do_config_file()
Here is the big pull request for char/misc drivers for 4.16-rc1.
There's a lot of stuff in here. Three new driver subsystems were added
for various types of hardware busses:
- siox
- slimbus
- soundwire
as well as a new vboxguest subsystem for the VirtualBox hypervisor
drivers.
There's also big updates from the FPGA subsystem, lots of Android binder
fixes, the usual handful of hyper-v updates, and lots of other smaller
driver updates.
All of these have been in linux-next for a long time, with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWnLuZw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynS4QCcCrPmwfD5PJwaF+q2dPfyKaflkQMAn0x6Wd+u
Gw3Z2scgjETUpwJ9ilnL
=xcQ0
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big pull request for char/misc drivers for 4.16-rc1.
There's a lot of stuff in here. Three new driver subsystems were added
for various types of hardware busses:
- siox
- slimbus
- soundwire
as well as a new vboxguest subsystem for the VirtualBox hypervisor
drivers.
There's also big updates from the FPGA subsystem, lots of Android
binder fixes, the usual handful of hyper-v updates, and lots of other
smaller driver updates.
All of these have been in linux-next for a long time, with no reported
issues"
* tag 'char-misc-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (155 commits)
char: lp: use true or false for boolean values
android: binder: use VM_ALLOC to get vm area
android: binder: Use true and false for boolean values
lkdtm: fix handle_irq_event symbol for INT_HW_IRQ_EN
EISA: Delete error message for a failed memory allocation in eisa_probe()
EISA: Whitespace cleanup
misc: remove AVR32 dependencies
virt: vbox: Add error mapping for VERR_INVALID_NAME and VERR_NO_MORE_FILES
soundwire: Fix a signedness bug
uio_hv_generic: fix new type mismatch warnings
uio_hv_generic: fix type mismatch warnings
auxdisplay: img-ascii-lcd: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE
uio_hv_generic: add rescind support
uio_hv_generic: check that host supports monitor page
uio_hv_generic: create send and receive buffers
uio: document uio_hv_generic regions
doc: fix documentation about uio_hv_generic
vmbus: add monitor_id and subchannel_id to sysfs per channel
vmbus: fix ABI documentation
uio_hv_generic: use ISR callback method
...
documentation, errseq documentation, kernel-doc support for nested
structure definitions, the removal of lots of crufty kernel-doc support for
unused formats, SPDX tag documentation, the beginnings of a manual for
subsystem maintainers, and lots of fixes and updates.
As usual, some of the changesets reach outside of Documentation/ to effect
kerneldoc comment fixes. It also adds the new LICENSES directory, of which
Thomas promises I do not need to be the maintainer.
-----BEGIN PGP SIGNATURE-----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=Z15Z
-----END PGP SIGNATURE-----
Merge tag 'docs-4.16' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"Documentation updates for 4.16.
New stuff includes refcount_t documentation, errseq documentation,
kernel-doc support for nested structure definitions, the removal of
lots of crufty kernel-doc support for unused formats, SPDX tag
documentation, the beginnings of a manual for subsystem maintainers,
and lots of fixes and updates.
As usual, some of the changesets reach outside of Documentation/ to
effect kerneldoc comment fixes. It also adds the new LICENSES
directory, of which Thomas promises I do not need to be the
maintainer"
* tag 'docs-4.16' of git://git.lwn.net/linux: (65 commits)
linux-next: docs-rst: Fix typos in kfigure.py
linux-next: DOC: HWPOISON: Fix path to debugfs in hwpoison.txt
Documentation: Fix misconversion of #if
docs: add index entry for networking/msg_zerocopy
Documentation: security/credentials.rst: explain need to sort group_list
LICENSES: Add MPL-1.1 license
LICENSES: Add the GPL 1.0 license
LICENSES: Add Linux syscall note exception
LICENSES: Add the MIT license
LICENSES: Add the BSD-3-clause "Clear" license
LICENSES: Add the BSD 3-clause "New" or "Revised" License
LICENSES: Add the BSD 2-clause "Simplified" license
LICENSES: Add the LGPL-2.1 license
LICENSES: Add the LGPL 2.0 license
LICENSES: Add the GPL 2.0 license
Documentation: Add license-rules.rst to describe how to properly identify file licenses
scripts: kernel_doc: better handle show warnings logic
fs/*/Kconfig: drop links to 404-compliant http://acl.bestbits.at
doc: md: Fix a file name to md-fault.c in fault-injection.txt
errseq: Add to documentation tree
...
The current find done in find_other_sources() excludes directories in
the kernel tree that are named 'include', eg.:
./security/apparmor/include
./security/selinux/include
./drivers/net/wireless/broadcom/brcm80211/include
./drivers/gpu/drm/amd/acp/include
./drivers/gpu/drm/amd/display/include
./drivers/gpu/drm/amd/include
./drivers/gpu/drm/nouveau/include
This changes the find command in find_other_sources() to include those
using the -path option.
Link: http://lkml.kernel.org/r/1513335768-7852-1-git-send-email-arend.vanspriel@broadcom.com
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In case of running scripts/decodecode without any parameters in order to
give a copy'n'pasted Code line from, for example, email it would parse
only first line of it, while in emails it's split to few.
ie, when you have a file out of oops the Code line looks like
Code: hh hh ... <hh> ... hh\n
When copy'n'paste from, for example, email where sender or some middle
MTA split it, the line looks like:
Code: hh hh ... hh\n
hh ... <hh> ... hh\n
hh hh ... hh\n
The Code line followed by another oops line usually contains characters
out of hex digit + space + < + > set.
So add logic to join this split back if and only if the following lines
have hex digits, or spaces, or '<', or '>' characters. It will be quite
unlikely to have a broken input in well formed Oops or dmesg, thus a
simple regex is being used.
Link: http://lkml.kernel.org/r/20171212100323.33201-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Dave Martin <Dave.Martin@arm.com>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull RCU updates from Ingo Molnar:
"The main RCU changes in this cycle were:
- Updates to use cond_resched() instead of cond_resched_rcu_qs()
where feasible (currently everywhere except in kernel/rcu and in
kernel/torture.c). Also a couple of fixes to avoid sending IPIs to
offline CPUs.
- Updates to simplify RCU's dyntick-idle handling.
- Updates to remove almost all uses of smp_read_barrier_depends() and
read_barrier_depends().
- Torture-test updates.
- Miscellaneous fixes"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (72 commits)
torture: Save a line in stutter_wait(): while -> for
torture: Eliminate torture_runnable and perf_runnable
torture: Make stutter less vulnerable to compilers and races
locking/locktorture: Fix num reader/writer corner cases
locking/locktorture: Fix rwsem reader_delay
torture: Place all torture-test modules in one MAINTAINERS group
rcutorture/kvm-build.sh: Skip build directory check
rcutorture: Simplify functions.sh include path
rcutorture: Simplify logging
rcutorture/kvm-recheck-*: Improve result directory readability check
rcutorture/kvm.sh: Support execution from any directory
rcutorture/kvm.sh: Use consistent help text for --qemu-args
rcutorture/kvm.sh: Remove unused variable, `alldone`
rcutorture: Remove unused script, config2frag.sh
rcutorture/configinit: Fix build directory error message
rcutorture: Preempt RCU-preempt readers more vigorously
torture: Reduce #ifdefs for preempt_schedule()
rcu: Remove have_rcu_nocb_mask from tree_plugin.h
rcu: Add comment giving debug strategy for double call_rcu()
tracing, rcu: Hide trace event rcu_nocb_wake when not used
...
Pull x86/pti updates from Thomas Gleixner:
"Another set of melted spectrum related changes:
- Code simplifications and cleanups for RSB and retpolines.
- Make the indirect calls in KVM speculation safe.
- Whitelist CPUs which are known not to speculate from Meltdown and
prepare for the new CPUID flag which tells the kernel that a CPU is
not affected.
- A less rigorous variant of the module retpoline check which merily
warns when a non-retpoline protected module is loaded and reflects
that fact in the sysfs file.
- Prepare for Indirect Branch Prediction Barrier support.
- Prepare for exposure of the Speculation Control MSRs to guests, so
guest OSes which depend on those "features" can use them. Includes
a blacklist of the broken microcodes. The actual exposure of the
MSRs through KVM is still being worked on"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/speculation: Simplify indirect_branch_prediction_barrier()
x86/retpoline: Simplify vmexit_fill_RSB()
x86/cpufeatures: Clean up Spectre v2 related CPUID flags
x86/cpu/bugs: Make retpoline module warning conditional
x86/bugs: Drop one "mitigation" from dmesg
x86/nospec: Fix header guards names
x86/alternative: Print unadorned pointers
x86/speculation: Add basic IBPB (Indirect Branch Prediction Barrier) support
x86/cpufeature: Blacklist SPEC_CTRL/PRED_CMD on early Spectre v2 microcodes
x86/pti: Do not enable PTI on CPUs which are not vulnerable to Meltdown
x86/msr: Add definitions for new speculation control MSRs
x86/cpufeatures: Add AMD feature bits for Speculation Control
x86/cpufeatures: Add Intel feature bits for Speculation Control
x86/cpufeatures: Add CPUID_7_EDX CPUID leaf
module/retpoline: Warn about missing retpoline in module
KVM: VMX: Make indirect call speculation safe
KVM: x86: Make indirect calls in emulator speculation safe
The kmemdup line in the non-patch case was left over from the added kmemdup
line in the patch case.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
As explained by Michal Marek at https://lkml.org/lkml/2011/8/31/189
silentoldconfig has become a misnomer. It has become an internal interface
so remove it from "make help" and Documentation/ to stop confusing people
using it as seen for instance at
https://chromium-review.googlesource.com/835632 Don't remove it from
kconfig/Makefile yet not to break any (other) tool using it.
On the other hand, correct and expand its description in the help of
the (internal) scripts/kconfig/conf.c
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
There's a risk that a kernel which has full retpoline mitigations becomes
vulnerable when a module gets loaded that hasn't been compiled with the
right compiler or the right option.
To enable detection of that mismatch at module load time, add a module info
string "retpoline" at build time when the module was compiled with
retpoline support. This only covers compiled C source, but assembler source
or prebuilt object files are not checked.
If a retpoline enabled kernel detects a non retpoline protected module at
load time, print a warning and report it in the sysfs vulnerability file.
[ tglx: Massaged changelog ]
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: gregkh@linuxfoundation.org
Cc: torvalds@linux-foundation.org
Cc: jeyu@kernel.org
Cc: arjan@linux.intel.com
Link: https://lkml.kernel.org/r/20180125235028.31211-1-andi@firstfloor.org
Kbuild supports 3 levels of extra warnings, and multiple levels can
be combined, like W=12, W=123. It was added by commit a6de553da0
("kbuild: Allow to combine multiple W= levels").
From the log of commit 8654cb8d03 ("dtc: update warning settings
for new bus and node/property name checks"), I assume:
- unit_address_vs_reg, simple_bus_reg, etc. belong to level 1
- node_name_chars_strict, property_name_chars_strict belong to level 2
However, the level 1 warnings are displayed by any argument to W=.
On the other hand, the level 2 warnings are displayed by W=2, but
not by W=12, or W=123.
Use $(findstring ...) like scripts/Makefile.extrawarn.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reverse dependency expressions can get rather unwieldy, especially if
a symbol is selected by more than a handful of other symbols. I.e. it's
possible to have near endless expressions like:
A && B && !C || D || F && (G || H) || [...]
Chop these expressions into actually readable chunks:
- A && B && !C
- D
- F && (G || H)
- [...]
I.e. transform the top level OR tokens into newlines and prepend each
line with a minus. This makes the "Selected by:" and "Implied by:" blurb
much easier to read. This is done only if there is more than one top
level OR. "Depends on:" and "Range :" were deliberately left as they are.
Based on idea from Paul Bolle.
Suggested-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The 'oldnoconfig' is really confusing due to its counter-intuitive name.
It was renamed by commit fb16d8912d ("kconfig: replace 'oldnoconfig'
with 'olddefconfig', and keep the old name as an alias").
The 'oldnoconfig' has been kept as an alias for enough period of time,
and finally I am planning to remove it. I will give people a little
more time for migration. Meanwhile, the following message will be
displayed if oldnoconfig is used.
WARNING: "oldnoconfig" target will be removed after Linux 4.19
Please use "olddefconfig" instead, which is an alias.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
The C-based config programs are properly guarded from a missing (or,
currently, external) libintl.h by the HOST_EXTRACFLAGS check, but
this does not help the C++-based qconf.
Signed-off-by: Yaakov Selkowitz <yselkowi@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
It is not obvious that the last two cases refer to menus and ifs,
respectively, in the conditional that sets 'parentdep'.
Automatic submenu creation is done later, so the parent can't be a
symbol here.
No functional changes. Only comments added.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
It is not obvious that this might refer to an 'if', making the code
pretty cryptic:
if (menu->list && (!menu->prompt || !menu->prompt->text)) {
Kconfig keeps the 'if' menu nodes even after flattening. Reflect that in
the example to be accurate.
No functional changes. Only comments added.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
It's easy to miss that choices are special-cased to pass on their mode
as the parent dependency.
No functional changes. Only comments added.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Not obvious, especially if you don't already know how choices are
implemented.
No functional changes. Only comments added.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Kconfig was the only user of these. With Kconfig converted to use
the default 'yy' prefix, we do not need them any more.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
Flex and Bison provide an option to change the prefix of globally-
visible symbols. This is useful to link multiple lexers and/or
parsers into the same executable. However, Kconfig (and any other
host programs in kernel) uses a single lexer and parser. I do not
see a good reason to change the default 'yy' prefix.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
conf_unsaved is initialized by conf_read_simple(), but it is possible
to move it to conf_read() so that it can be a local variable.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Sparse reports:
warning: symbol 'xfgets' was not declared. Should it be static?
It is declared as static, but it is missing in the definition part.
Move the definition up and remove the forward declaration.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Avoids mistakes like in the following real-world example, where only the
final help string ("Say Y...") was used. This particular example was
fixed in commit 561b29e4ec ("media: fix media Kconfig help syntax
issues").
config DVB_NETUP_UNIDVB
...
select DVB_CXD2841ER if MEDIA_SUBDRV_AUTOSELECT
---help---
Support for NetUP PCI express Universal DVB card.
help
Say Y when you want to support NetUP Dual Universal DVB card
...
This now prints the following warning:
drivers/media/pci/netup_unidvb:13: warning: 'DVB_NETUP_UNIDVB' defined with more than one help text -- only the last one will be used
Also free() any extra help strings.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
No more users of this keyword. Drop it according to the notice by
commit 6341e62b21 ("kconfig: use bool instead of boolean for type
definition attributes").
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Luis R. Rodriguez <mcgrof@kernel.org>
Masahiro Yamada
Riku Voipio
Rob Herring
Alexander Kapshuk
Andrew F. Davis
David S. Miller
Changbin Du
Mauro Carvalho Chehab
Linus Torvalds
Nicolas Pitre
Mauro Rossi
Rasmus Villemoes
Quentin Monnet
Dave Airlie
Thomas Gleixner
Don Zickus
Javier Martinez Canillas
Joe Perches
Heinrich Schuchardt
Claudio Fontana
Tobin C. Harding
Gilad Ben-Yossef
Dominik Brodowski
Robin Jarry
Liu, Changcheng
Alan Kao
Sargun Dhillon
Sean Paul
Mauro Carvalho Chehab
Jason Gunthorpe
Jan Kiszka
Tobias Klauser
Arnd Bergmann
Ulf Magnusson
Eugeniu Rosca
Cao jin
Michael Forney
Nicholas Piggin
Sami Tolvanen
Haneen Mohammed
Matthew Wilcox
David Howells
James Hogan
Matteo Croce
Ard Biesheuvel
Dafna Hirschfeld
Arvind Prasanna
Peter Zijlstra
Jonathan Corbet
Mike Rapoport
Julia Lawall
Andrey Ryabinin
Andreas Brauchli
Paul Lawrence
Andrey Konovalov
Kees Cook
valdis.kletnieks@vt.edu
Arend van Spriel
Andy Shevchenko
Marc Herbert
Andi Kleen
Petr Vorel
Yaakov Selkowitz