struct call_single_data is used in IPIs to transfer information between
CPUs. Its size is bigger than sizeof(unsigned long) and less than
cache line size. Currently it is not allocated with any explicit alignment
requirements. This makes it possible for allocated call_single_data to
cross two cache lines, which results in double the number of the cache lines
that need to be transferred among CPUs.
This can be fixed by requiring call_single_data to be aligned with the
size of call_single_data. Currently the size of call_single_data is the
power of 2. If we add new fields to call_single_data, we may need to
add padding to make sure the size of new definition is the power of 2
as well.
Fortunately, this is enforced by GCC, which will report bad sizes.
To set alignment requirements of call_single_data to the size of
call_single_data, a struct definition and a typedef is used.
To test the effect of the patch, I used the vm-scalability multiple
thread swap test case (swap-w-seq-mt). The test will create multiple
threads and each thread will eat memory until all RAM and part of swap
is used, so that huge number of IPIs are triggered when unmapping
memory. In the test, the throughput of memory writing improves ~5%
compared with misaligned call_single_data, because of faster IPIs.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Huang, Ying <ying.huang@intel.com>
[ Add call_single_data_t and align with size of call_single_data. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Aaron Lu <aaron.lu@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/87bmnqd6lz.fsf@yhuang-mobile.sh.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Where XHLOCK_{SOFT,HARD} are save/restore points in the xhlocks[] to
ensure the temporal IRQ events don't interact with task state, the
XHLOCK_PROC is a fundament different beast that just happens to share
the interface.
The purpose of XHLOCK_PROC is to annotate independent execution inside
one task. For example workqueues, each work should appear to run in its
own 'pristine' 'task'.
Remove XHLOCK_PROC in favour of its own interface to avoid confusion.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Byungchul Park <byungchul.park@lge.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: boqun.feng@gmail.com
Cc: david@fromorbit.com
Cc: johannes@sipsolutions.net
Cc: kernel-team@lge.com
Cc: oleg@redhat.com
Cc: tj@kernel.org
Link: http://lkml.kernel.org/r/20170829085939.ggmb6xiohw67micb@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
For understanding how the workload maps to memory channels and hardware
behavior, it's very important to collect address maps with physical
addresses. For example, 3D XPoint access can only be found by filtering
the physical address.
Add a new sample type for physical address.
perf already has a facility to collect data virtual address. This patch
introduces a function to convert the virtual address to physical address.
The function is quite generic and can be extended to any architecture as
long as a virtual address is provided.
- For kernel direct mapping addresses, virt_to_phys is used to convert
the virtual addresses to physical address.
- For user virtual addresses, __get_user_pages_fast is used to walk the
pages tables for user physical address.
- This does not work for vmalloc addresses right now. These are not
resolved, but code to do that could be added.
The new sample type requires collecting the virtual address. The
virtual address will not be output unless SAMPLE_ADDR is applied.
For security, the physical address can only be exposed to root or
privileged user.
Tested-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Cc: mpe@ellerman.id.au
Link: http://lkml.kernel.org/r/1503967969-48278-1-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
I just noticed that hw.itrace_started and hw.config are aliased to the
same location. Now, the PT driver happens to use both, which works out
fine by sheer luck:
- STORE(hw.itrace_start) is ordered before STORE(hw.config), in the
program order, although there are no compiler barriers to ensure that,
- to the perf_log_itrace_start() hw.itrace_start looks set at the same
time as when it is intended to be set because both stores happen in the
same path,
- hw.config is never reset to zero in the PT driver.
Now, the use of hw.config by the PT driver makes more sense (it being a
HW PMU) than messing around with itrace_started, which is an awkward API
to begin with.
This patch replaces hw.itrace_started with an attach_state bit and an
API call for the PMU drivers to use to communicate the condition.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: vince@deater.net
Link: http://lkml.kernel.org/r/20170330153956.25994-1-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When running perf on the ftrace:function tracepoint, there is a bug
which can be reproduced by:
perf record -e ftrace:function -a sleep 20 &
perf record -e ftrace:function ls
perf script
ls 10304 [005] 171.853235: ftrace:function:
perf_output_begin
ls 10304 [005] 171.853237: ftrace:function:
perf_output_begin
ls 10304 [005] 171.853239: ftrace:function:
task_tgid_nr_ns
ls 10304 [005] 171.853240: ftrace:function:
task_tgid_nr_ns
ls 10304 [005] 171.853242: ftrace:function:
__task_pid_nr_ns
ls 10304 [005] 171.853244: ftrace:function:
__task_pid_nr_ns
We can see that all the function traces are doubled.
The problem is caused by the inconsistency of the register
function perf_ftrace_event_register() with the probe function
perf_ftrace_function_call(). The former registers one probe
for every perf_event. And the latter handles all perf_events
on the current cpu. So when two perf_events on the current cpu,
the traces of them will be doubled.
So this patch adds an extra parameter "event" for perf_tp_event,
only send sample data to this event when it's not NULL.
Signed-off-by: Zhou Chengming <zhouchengming1@huawei.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@kernel.org
Cc: alexander.shishkin@linux.intel.com
Cc: huawei.libin@huawei.com
Link: http://lkml.kernel.org/r/1503668977-12526-1-git-send-email-zhouchengming1@huawei.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
While examining the kernel source code, I found a dangerous operation that
could turn into a double-fetch situation (a race condition bug) where the same
userspace memory region are fetched twice into kernel with sanity checks after
the first fetch while missing checks after the second fetch.
1. The first fetch happens in line 9573 get_user(size, &uattr->size).
2. Subsequently the 'size' variable undergoes a few sanity checks and
transformations (line 9577 to 9584).
3. The second fetch happens in line 9610 copy_from_user(attr, uattr, size)
4. Given that 'uattr' can be fully controlled in userspace, an attacker can
race condition to override 'uattr->size' to arbitrary value (say, 0xFFFFFFFF)
after the first fetch but before the second fetch. The changed value will be
copied to 'attr->size'.
5. There is no further checks on 'attr->size' until the end of this function,
and once the function returns, we lose the context to verify that 'attr->size'
conforms to the sanity checks performed in step 2 (line 9577 to 9584).
6. My manual analysis shows that 'attr->size' is not used elsewhere later,
so, there is no working exploit against it right now. However, this could
easily turns to an exploitable one if careless developers start to use
'attr->size' later.
To fix this, override 'attr->size' from the second fetch to the one from the
first fetch, regardless of what is actually copied in.
In this way, it is assured that 'attr->size' is consistent with the checks
performed after the first fetch.
Signed-off-by: Meng Xu <mengxu.gatech@gmail.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@kernel.org
Cc: alexander.shishkin@linux.intel.com
Cc: meng.xu@gatech.edu
Cc: sanidhya@gatech.edu
Cc: taesoo@gatech.edu
Link: http://lkml.kernel.org/r/1503522470-35531-1-git-send-email-meng.xu@gatech.edu
Signed-off-by: Ingo Molnar <mingo@kernel.org>
"err" is set to zero if bpf_map_area_alloc() fails so it means we return
ERR_PTR(0) which is NULL. The caller, find_and_alloc_map(), is not
expecting NULL returns and will oops.
Fixes: 174a79ff95 ("bpf: sockmap with sk redirect support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After userspace pushes sockets into a sockmap it may not be receiving
data (assuming stream_{parser|verdict} programs are attached). But, it
may still want to manage the socks. A common pattern is to poll/select
for a POLLRDHUP event so we can close the sock.
This patch adds the logic to wake up these listeners.
Also add TCP_SYN_SENT to the list of events to handle. We don't want
to break the connection just because we happen to be in this state.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When attaching a program to sockmap we need to check map type
is correct.
Fixes: 174a79ff95 ("bpf: sockmap with sk redirect support")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
References to psock must be done inside RCU critical section.
Fixes: 174a79ff95 ("bpf: sockmap with sk redirect support")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The addition of map_flags BPF_SOCKMAP_STRPARSER flags was to handle a
specific use case where we want to have BPF parse program disabled on
an entry in a sockmap.
However, Alexei found the API a bit cumbersome and I agreed. Lets
remove the STRPARSER flag and support the use case by allowing socks
to be in multiple maps. This allows users to create two maps one with
programs attached and one without. When socks are added to maps they
now inherit any programs attached to the map. This is a nice
generalization and IMO improves the API.
The API rules are less ambiguous and do not need a flag:
- When a sock is added to a sockmap we have two cases,
i. The sock map does not have any attached programs so
we can add sock to map without inheriting bpf programs.
The sock may exist in 0 or more other maps.
ii. The sock map has an attached BPF program. To avoid duplicate
bpf programs we only add the sock entry if it does not have
an existing strparser/verdict attached, returning -EBUSY if
a program is already attached. Otherwise attach the program
and inherit strparser/verdict programs from the sock map.
This allows for socks to be in a multiple maps for redirects and
inherit a BPF program from a single map.
Also this patch simplifies the logic around BPF_{EXIST|NOEXIST|ANY}
flags. In the original patch I tried to be extra clever and only
update map entries when necessary. Now I've decided the complexity
is not worth it. If users constantly update an entry with the same
sock for no reason (i.e. update an entry without actually changing
any parameters on map or sock) we still do an alloc/release. Using
this and allowing multiple entries of a sock to exist in a map the
logic becomes much simpler.
Note: Now that multiple maps are supported the "maps" pointer called
when a socket is closed becomes a list of maps to remove the sock from.
To keep the map up to date when a sock is added to the sockmap we must
add the map/elem in the list. Likewise when it is removed we must
remove it from the list. This results in searching the per psock list
on delete operation. On TCP_CLOSE events we walk the list and remove
the psock from all map/entry locations. I don't see any perf
implications in this because at most I have a psock in two maps. If
a psock were to be in many maps its possibly this might be noticeable
on delete but I can't think of a reason to dup a psock in many maps.
The sk_callback_lock is used to protect read/writes to the list. This
was convenient because in all locations we were taking the lock
anyways just after working on the list. Also the lock is per sock so
in normal cases we shouldn't see any contention.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Fixes: 174a79ff95 ("bpf: sockmap with sk redirect support")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the initial sockmap API we provided strparser and verdict programs
using a single attach command by extending the attach API with a the
attach_bpf_fd2 field.
However, if we add other programs in the future we will be adding a
field for every new possible type, attach_bpf_fd(3,4,..). This
seems a bit clumsy for an API. So lets push the programs using two
new type fields.
BPF_SK_SKB_STREAM_PARSER
BPF_SK_SKB_STREAM_VERDICT
This has the advantage of having a readable name and can easily be
extended in the future.
Updates to samples and sockmap included here also generalize tests
slightly to support upcoming patch for multiple map support.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Fixes: 174a79ff95 ("bpf: sockmap with sk redirect support")
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tim Chen and Kan Liang have been battling a customer load that shows
extremely long page wakeup lists. The cause seems to be constant NUMA
migration of a hot page that is shared across a lot of threads, but the
actual root cause for the exact behavior has not been found.
Tim has a patch that batches the wait list traversal at wakeup time, so
that we at least don't get long uninterruptible cases where we traverse
and wake up thousands of processes and get nasty latency spikes. That
is likely 4.14 material, but we're still discussing the page waitqueue
specific parts of it.
In the meantime, I've tried to look at making the page wait queues less
expensive, and failing miserably. If you have thousands of threads
waiting for the same page, it will be painful. We'll need to try to
figure out the NUMA balancing issue some day, in addition to avoiding
the excessive spinlock hold times.
That said, having tried to rewrite the page wait queues, I can at least
fix up some of the braindamage in the current situation. In particular:
(a) we don't want to continue walking the page wait list if the bit
we're waiting for already got set again (which seems to be one of
the patterns of the bad load). That makes no progress and just
causes pointless cache pollution chasing the pointers.
(b) we don't want to put the non-locking waiters always on the front of
the queue, and the locking waiters always on the back. Not only is
that unfair, it means that we wake up thousands of reading threads
that will just end up being blocked by the writer later anyway.
Also add a comment about the layout of 'struct wait_page_key' - there is
an external user of it in the cachefiles code that means that it has to
match the layout of 'struct wait_bit_key' in the two first members. It
so happens to match, because 'struct page *' and 'unsigned long *' end
up having the same values simply because the page flags are the first
member in struct page.
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Christopher Lameter <cl@linux.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull timer fix from Ingo Molnar:
"Fix a timer granularity handling race+bug, which would manifest itself
by spuriously increasing timeouts of some timers (from 1 jiffy to ~500
jiffies in the worst case measured) in certain nohz states"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timers: Fix excessive granularity of new timers after a nohz idle
Pull perf fix from Ingo Molnar:
"A single fix to not allow nonsensical event groups that result in
kernel warnings"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix group {cpu,task} validation
In comqit fc6eead7c1 ("time: Clean up CLOCK_MONOTONIC_RAW time
handling"), the following code got mistakenly added to the update of the
raw timekeeper:
/* Update the monotonic raw base */
seconds = tk->raw_sec;
nsec = (u32)(tk->tkr_raw.xtime_nsec >> tk->tkr_raw.shift);
tk->tkr_raw.base = ns_to_ktime(seconds * NSEC_PER_SEC + nsec);
Which adds the raw_sec value and the shifted down raw xtime_nsec to the
base value.
But the read function adds the shifted down tk->tkr_raw.xtime_nsec value
another time, The result of this is that ktime_get_raw() users (which are
all internal users) see the raw time move faster then it should (the rate
at which can vary with the current size of tkr_raw.xtime_nsec), which has
resulted in at least problems with graphics rendering performance.
The change tried to match the monotonic base update logic:
seconds = (u64)(tk->xtime_sec + tk->wall_to_monotonic.tv_sec);
nsec = (u32) tk->wall_to_monotonic.tv_nsec;
tk->tkr_mono.base = ns_to_ktime(seconds * NSEC_PER_SEC + nsec);
Which adds the wall_to_monotonic.tv_nsec value, but not the
tk->tkr_mono.xtime_nsec value to the base.
To fix this, simplify the tkr_raw.base accumulation to only accumulate the
raw_sec portion, and do not include the tkr_raw.xtime_nsec portion, which
will be added at read time.
Fixes: fc6eead7c1 ("time: Clean up CLOCK_MONOTONIC_RAW time handling")
Reported-and-tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Daniel Mentz <danielmentz@google.com>
Link: http://lkml.kernel.org/r/1503701824-1645-1-git-send-email-john.stultz@linaro.org
Commit 7c05126793 ("mm, fork: make dup_mmap wait for mmap_sem for
write killable") made it possible to kill a forking task while it is
waiting to acquire its ->mmap_sem for write, in dup_mmap().
However, it was overlooked that this introduced an new error path before
a reference is taken on the mm_struct's ->exe_file. Since the
->exe_file of the new mm_struct was already set to the old ->exe_file by
the memcpy() in dup_mm(), it was possible for the mmput() in the error
path of dup_mm() to drop a reference to ->exe_file which was never
taken.
This caused the struct file to later be freed prematurely.
Fix it by updating mm_init() to NULL out the ->exe_file, in the same
place it clears other things like the list of mmaps.
This bug was found by syzkaller. It can be reproduced using the
following C program:
#define _GNU_SOURCE
#include <pthread.h>
#include <stdlib.h>
#include <sys/mman.h>
#include <sys/syscall.h>
#include <sys/wait.h>
#include <unistd.h>
static void *mmap_thread(void *_arg)
{
for (;;) {
mmap(NULL, 0x1000000, PROT_READ,
MAP_POPULATE|MAP_ANONYMOUS|MAP_PRIVATE, -1, 0);
}
}
static void *fork_thread(void *_arg)
{
usleep(rand() % 10000);
fork();
}
int main(void)
{
fork();
fork();
fork();
for (;;) {
if (fork() == 0) {
pthread_t t;
pthread_create(&t, NULL, mmap_thread, NULL);
pthread_create(&t, NULL, fork_thread, NULL);
usleep(rand() % 10000);
syscall(__NR_exit_group, 0);
}
wait(NULL);
}
}
No special kernel config options are needed. It usually causes a NULL
pointer dereference in __remove_shared_vm_struct() during exit, or in
dup_mmap() (which is usually inlined into copy_process()) during fork.
Both are due to a vm_area_struct's ->vm_file being used after it's
already been freed.
Google Bug Id: 64772007
Link: http://lkml.kernel.org/r/20170823211408.31198-1-ebiggers3@gmail.com
Fixes: 7c05126793 ("mm, fork: make dup_mmap wait for mmap_sem for write killable")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org> [v4.7+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is code duplicated over all architecture's headers for
futex_atomic_op_inuser. Namely op decoding, access_ok check for uaddr,
and comparison of the result.
Remove this duplication and leave up to the arches only the needed
assembly which is now in arch_futex_atomic_op_inuser.
This effectively distributes the Will Deacon's arm64 fix for undefined
behaviour reported by UBSAN to all architectures. The fix was done in
commit 5f16a046f8 (arm64: futex: Fix undefined behaviour with
FUTEX_OP_OPARG_SHIFT usage). Look there for an example dump.
And as suggested by Thomas, check for negative oparg too, because it was
also reported to cause undefined behaviour report.
Note that s390 removed access_ok check in d12a29703 ("s390/uaccess:
remove pointless access_ok() checks") as access_ok there returns true.
We introduce it back to the helper for the sake of simplicity (it gets
optimized away anyway).
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> [s390]
Acked-by: Chris Metcalf <cmetcalf@mellanox.com> [for tile]
Reviewed-by: Darren Hart (VMware) <dvhart@infradead.org>
Reviewed-by: Will Deacon <will.deacon@arm.com> [core/arm64]
Cc: linux-mips@linux-mips.org
Cc: Rich Felker <dalias@libc.org>
Cc: linux-ia64@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: peterz@infradead.org
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: sparclinux@vger.kernel.org
Cc: Jonas Bonn <jonas@southpole.se>
Cc: linux-s390@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: linux-hexagon@vger.kernel.org
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: linux-snps-arc@lists.infradead.org
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-xtensa@linux-xtensa.org
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: openrisc@lists.librecores.org
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Stafford Horne <shorne@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Richard Henderson <rth@twiddle.net>
Cc: Chris Zankel <chris@zankel.net>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-parisc@vger.kernel.org
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: linux-alpha@vger.kernel.org
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: "David S. Miller" <davem@davemloft.net>
Link: http://lkml.kernel.org/r/20170824073105.3901-1-jslaby@suse.cz
kernel/irq/proc.c: In function ‘show_irq_affinity’:
include/linux/cpumask.h:24:29: warning: ‘mask’ may be used uninitialized in this function [-Wmaybe-uninitialized]
#define cpumask_bits(maskp) ((maskp)->bits)
gcc is silly, but admittedly it can't know that this won't be called with
anything else than the enumerated constants.
Shut up the warning by creating a default clause.
Fixes: 6bc6d4abd2 ("genirq/proc: Use the the accessor to report the effective affinity
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This code generates a Smatch warning:
kernel/irq/irqdomain.c:1511 irq_domain_push_irq()
warn: variable dereferenced before check 'root_irq_data' (see line 1508)
irq_get_irq_data() can return a NULL pointer, but the code dereferences
the returned pointer before checking it.
Move the NULL pointer check before the dereference.
[ tglx: Rewrote changelog to be precise and conforming to the instructions
in submitting-patches and added a Fixes tag. Sigh! ]
Fixes: 495c38d300 ("irqdomain: Add irq_domain_{push,pop}_irq() functions")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: David Daney <david.daney@cavium.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: kernel-janitors@vger.kernel.org
Link: http://lkml.kernel.org/r/20170825121409.6rfv4vt6ztz2oqkt@mwanda
Currently we unconditionally destroy all sysctl bits and regenerate
them after we've rebuild the domains (even if that rebuild is a
no-op).
And since we unconditionally (re)build the sysctl for all possible
CPUs, onlining all CPUs gets us O(n^2) time. Instead change this to
only rebuild the bits for CPUs we've actually installed new domains
on.
Reported-by: Ofer Levi(SW) <oferle@mellanox.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Fix partition_sched_domains() to try and preserve the existing machine
wide domain instead of unconditionally destroying it. We do this by
attempting to allocate the new single domain, only when that fails to
we reuse the fallback_doms.
When using fallback_doms we need to first destroy and then recreate
because both the old and new could be backed by it.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ofer Levi(SW) <oferle@mellanox.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vineet.Gupta1@synopsys.com <Vineet.Gupta1@synopsys.com>
Cc: rusty@rustcorp.com.au <rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When disabling cpuset.sched_load_balance we expect to be able to online
CPUs without generating sched_domains. However this is currently
completely broken.
What happens is that we generate the sched_domains and then destroy
them. This is because of the spurious 'default' domain build in
cpuset_update_active_cpus(). That builds a single machine wide domain
and then schedules a work to build the 'real' domains. The work then
finds there are _no_ domains and destroys the lot again.
Furthermore, if there actually were cpusets, building the machine wide
domain is actively wrong, because it would allow tasks to 'escape' their
cpuset. Also I don't think its needed, the scheduler really should
respect the active mask.
Reported-by: Ofer Levi(SW) <oferle@mellanox.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vineet.Gupta1@synopsys.com <Vineet.Gupta1@synopsys.com>
Cc: rusty@rustcorp.com.au <rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Mike provided a better comment for destroy_sched_domain() ...
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The new completion/crossrelease annotations interact unfavourable with
the extant flush_work()/flush_workqueue() annotations.
The problem is that when a single work class does:
wait_for_completion(&C)
and
complete(&C)
in different executions, we'll build dependencies like:
lock_map_acquire(W)
complete_acquire(C)
and
lock_map_acquire(W)
complete_release(C)
which results in the dependency chain: W->C->W, which lockdep thinks
spells deadlock, even though there is no deadlock potential since
works are ran concurrently.
One possibility would be to change the work 'lock' to recursive-read,
but that would mean hitting a lockdep limitation on recursive locks.
Also, unconditinoally switching to recursive-read here would fail to
detect the actual deadlock on single-threaded workqueues, which do
have a problem with this.
For now, forcefully disregard these locks for crossrelease.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: boqun.feng@gmail.com
Cc: byungchul.park@lge.com
Cc: david@fromorbit.com
Cc: johannes@sipsolutions.net
Cc: oleg@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The flush_work() annotation as introduced by commit:
e159489baa ("workqueue: relax lockdep annotation on flush_work()")
hits on the lockdep problem with recursive read locks.
The situation as described is:
Work W1: Work W2: Task:
ARR(Q) ARR(Q) flush_workqueue(Q)
A(W1) A(W2) A(Q)
flush_work(W2) R(Q)
A(W2)
R(W2)
if (special)
A(Q)
else
ARR(Q)
R(Q)
where: A - acquire, ARR - acquire-read-recursive, R - release.
Where under 'special' conditions we want to trigger a lock recursion
deadlock, but otherwise allow the flush_work(). The allowing is done
by using recursive read locks (ARR), but lockdep is broken for
recursive stuff.
However, there appears to be no need to acquire the lock if we're not
'special', so if we remove the 'else' clause things become much
simpler and no longer need the recursion thing at all.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: boqun.feng@gmail.com
Cc: byungchul.park@lge.com
Cc: david@fromorbit.com
Cc: johannes@sipsolutions.net
Cc: oleg@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In an XDP redirect applications using tracepoint xdp:xdp_redirect to
diagnose TX overrun, I noticed perf_swevent_get_recursion_context()
was consuming 2% CPU. This was reduced to 1.85% with this simple
change.
Looking at the annotated asm code, it was clear that the unlikely case
in_nmi() test was chosen (by the compiler) as the most likely
event/branch. This small adjustment makes the compiler (GCC version
7.1.1 20170622 (Red Hat 7.1.1-3)) put in_nmi() as an unlikely branch.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/150342256382.16595.986861478681783732.stgit@firesoul
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The exiting/dead task has no PIDs and in this case perf_event_pid/tid()
return zero, change them to return -1 to distinguish this case from
idle threads.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170822155928.GA6892@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The aux_watermark member of struct ring_buffer represents the period (in
terms of bytes) at which wakeup events should be generated when data is
written to the aux buffer in non-snapshot mode. On hardware that cannot
generate an interrupt when the aux_head reaches an arbitrary wakeup index
(such as ARM SPE), the aux_head sampled from handle->head in
perf_aux_output_{skip,end} may in fact be past the wakeup index. This
can lead to wakeup slowly falling behind the head. For example, consider
the case where hardware can only generate an interrupt on a page-boundary
and the aux buffer is initialised as follows:
// Buffer size is 2 * PAGE_SIZE
rb->aux_head = rb->aux_wakeup = 0
rb->aux_watermark = PAGE_SIZE / 2
following the first perf_aux_output_begin call, the handle is
initialised with:
handle->head = 0
handle->size = 2 * PAGE_SIZE
handle->wakeup = PAGE_SIZE / 2
and the hardware will be programmed to generate an interrupt at
PAGE_SIZE.
When the interrupt is raised, the hardware head will be at PAGE_SIZE,
so calling perf_aux_output_end(handle, PAGE_SIZE) puts the ring buffer
into the following state:
rb->aux_head = PAGE_SIZE
rb->aux_wakeup = PAGE_SIZE / 2
rb->aux_watermark = PAGE_SIZE / 2
and then the next call to perf_aux_output_begin will result in:
handle->head = handle->wakeup = PAGE_SIZE
for which the semantics are unclear and, for a smaller aux_watermark
(e.g. PAGE_SIZE / 4), then the wakeup would in fact be behind head at
this point.
This patch fixes the problem by rounding down the aux_head (as sampled
from the handle) to the nearest aux_watermark boundary when updating
rb->aux_wakeup, therefore taking into account any overruns by the
hardware.
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1502900297-21839-2-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The aux_head and aux_wakeup members of struct ring_buffer are defined
using the local_t type, despite the fact that they are only accessed via
the perf_aux_output_*() functions, which cannot race with each other for a
given ring buffer.
This patch changes the type of the members to long, so we can avoid
using the local_*() API where it isn't needed.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1502900297-21839-1-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Regardless of which events form a group, it does not make sense for the
events to target different tasks and/or CPUs, as this leaves the group
inconsistent and impossible to schedule. The core perf code assumes that
these are consistent across (successfully intialised) groups.
Core perf code only verifies this when moving SW events into a HW
context. Thus, we can violate this requirement for pure SW groups and
pure HW groups, unless the relevant PMU driver happens to perform this
verification itself. These mismatched groups subsequently wreak havoc
elsewhere.
For example, we handle watchpoints as SW events, and reserve watchpoint
HW on a per-CPU basis at pmu::event_init() time to ensure that any event
that is initialised is guaranteed to have a slot at pmu::add() time.
However, the core code only checks the group leader's cpu filter (via
event_filter_match()), and can thus install follower events onto CPUs
violating thier (mismatched) CPU filters, potentially installing them
into a CPU without sufficient reserved slots.
This can be triggered with the below test case, resulting in warnings
from arch backends.
#define _GNU_SOURCE
#include <linux/hw_breakpoint.h>
#include <linux/perf_event.h>
#include <sched.h>
#include <stdio.h>
#include <sys/prctl.h>
#include <sys/syscall.h>
#include <unistd.h>
static int perf_event_open(struct perf_event_attr *attr, pid_t pid, int cpu,
int group_fd, unsigned long flags)
{
return syscall(__NR_perf_event_open, attr, pid, cpu, group_fd, flags);
}
char watched_char;
struct perf_event_attr wp_attr = {
.type = PERF_TYPE_BREAKPOINT,
.bp_type = HW_BREAKPOINT_RW,
.bp_addr = (unsigned long)&watched_char,
.bp_len = 1,
.size = sizeof(wp_attr),
};
int main(int argc, char *argv[])
{
int leader, ret;
cpu_set_t cpus;
/*
* Force use of CPU0 to ensure our CPU0-bound events get scheduled.
*/
CPU_ZERO(&cpus);
CPU_SET(0, &cpus);
ret = sched_setaffinity(0, sizeof(cpus), &cpus);
if (ret) {
printf("Unable to set cpu affinity\n");
return 1;
}
/* open leader event, bound to this task, CPU0 only */
leader = perf_event_open(&wp_attr, 0, 0, -1, 0);
if (leader < 0) {
printf("Couldn't open leader: %d\n", leader);
return 1;
}
/*
* Open a follower event that is bound to the same task, but a
* different CPU. This means that the group should never be possible to
* schedule.
*/
ret = perf_event_open(&wp_attr, 0, 1, leader, 0);
if (ret < 0) {
printf("Couldn't open mismatched follower: %d\n", ret);
return 1;
} else {
printf("Opened leader/follower with mismastched CPUs\n");
}
/*
* Open as many independent events as we can, all bound to the same
* task, CPU0 only.
*/
do {
ret = perf_event_open(&wp_attr, 0, 0, -1, 0);
} while (ret >= 0);
/*
* Force enable/disble all events to trigger the erronoeous
* installation of the follower event.
*/
printf("Opened all events. Toggling..\n");
for (;;) {
prctl(PR_TASK_PERF_EVENTS_DISABLE, 0, 0, 0, 0);
prctl(PR_TASK_PERF_EVENTS_ENABLE, 0, 0, 0, 0);
}
return 0;
}
Fix this by validating this requirement regardless of whether we're
moving events.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Zhou Chengming <zhouchengming1@huawei.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1498142498-15758-1-git-send-email-mark.rutland@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
- Two small memory leaks in error paths.
- A missed return error code on an error path.
- A fix to check the tracing ring buffer CPU when it doesn't
exist (caused by setting maxcpus on the command line that is less
than the actual number of CPUs, and then onlining them manually).
- A fix to have the reset of boot tracers called by lateinit_sync()
instead of just lateinit(). As some of the tracers register via
lateinit(), and if the clear happens before the tracer is registered,
it will never start even though it was told to via the kernel command
line.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEQEw9Eu0DdyUUkuUUybkF8mrZjcsFAlme4DwUHHJvc3RlZHRA
Z29vZG1pcy5vcmcACgkQybkF8mrZjcssNwf+Itap7Mtbk48wJYNqfjk1pzyiOcYV
WM88EOBFM46dttVN6cBs2uUmtdvmX/g52RtsHzG6ZbwxzLE+tIGbSO2plGoknOyD
lro5CSHT2j3bu0enqkxfznDUT0PNrELEaYBoMK0yhMsXm0v+XqHUxkIqb19Ubuo+
ORPBShZghJtAiEBFArV1nXBW1kzrIFJwjymdF2ccqUlg+XxtPS1wgnZPIOjCa8ia
YM4bX3aTUh4LiUUvS7FlJsrwjB+JFOHdXu1Vg140CvJEon1a+bW4Jx88MxoN6zrp
xmFlXm/8MLWz27GO11IkveH01mSrdP67bKIIx8v2ybPBbwsW0Msb2HfZkw==
=rUJQ
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Various bug fixes:
- Two small memory leaks in error paths.
- A missed return error code on an error path.
- A fix to check the tracing ring buffer CPU when it doesn't exist
(caused by setting maxcpus on the command line that is less than
the actual number of CPUs, and then onlining them manually).
- A fix to have the reset of boot tracers called by lateinit_sync()
instead of just lateinit(). As some of the tracers register via
lateinit(), and if the clear happens before the tracer is
registered, it will never start even though it was told to via the
kernel command line"
* tag 'trace-v4.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix freeing of filter in create_filter() when set_str is false
tracing: Fix kmemleak in tracing_map_array_free()
ftrace: Check for null ret_stack on profile function graph entry function
ring-buffer: Have ring_buffer_alloc_read_page() return error on offline CPU
tracing: Missing error code in tracer_alloc_buffers()
tracing: Call clear_boot_tracer() at lateinit_sync
The memory_pressure control file was incorrectly set up without
a private value (0, by default). As a result, this control
file was treated like memory_migrate on read. By adding back the
FILE_MEMORY_PRESSURE private value, the correct memory pressure value
will be returned.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 7dbdb199d3 ("cgroup: replace cftype->mode with CFTYPE_WORLD_WRITABLE")
Cc: stable@vger.kernel.org # v4.4+
Performing the following task with kmemleak enabled:
# cd /sys/kernel/tracing/events/irq/irq_handler_entry/
# echo 'enable_event:kmem:kmalloc:3 if irq >' > trigger
# echo 'enable_event:kmem:kmalloc:3 if irq > 31' > trigger
# echo scan > /sys/kernel/debug/kmemleak
# cat /sys/kernel/debug/kmemleak
unreferenced object 0xffff8800b9290308 (size 32):
comm "bash", pid 1114, jiffies 4294848451 (age 141.139s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff81cef5aa>] kmemleak_alloc+0x4a/0xa0
[<ffffffff81357938>] kmem_cache_alloc_trace+0x158/0x290
[<ffffffff81261c09>] create_filter_start.constprop.28+0x99/0x940
[<ffffffff812639c9>] create_filter+0xa9/0x160
[<ffffffff81263bdc>] create_event_filter+0xc/0x10
[<ffffffff812655e5>] set_trigger_filter+0xe5/0x210
[<ffffffff812660c4>] event_enable_trigger_func+0x324/0x490
[<ffffffff812652e2>] event_trigger_write+0x1a2/0x260
[<ffffffff8138cf87>] __vfs_write+0xd7/0x380
[<ffffffff8138f421>] vfs_write+0x101/0x260
[<ffffffff8139187b>] SyS_write+0xab/0x130
[<ffffffff81cfd501>] entry_SYSCALL_64_fastpath+0x1f/0xbe
[<ffffffffffffffff>] 0xffffffffffffffff
The function create_filter() is passed a 'filterp' pointer that gets
allocated, and if "set_str" is true, it is up to the caller to free it, even
on error. The problem is that the pointer is not freed by create_filter()
when set_str is false. This is a bug, and it is not up to the caller to free
the filter on error if it doesn't care about the string.
Link: http://lkml.kernel.org/r/1502705898-27571-2-git-send-email-chuhu@redhat.com
Cc: stable@vger.kernel.org
Fixes: 38b78eb85 ("tracing: Factorize filter creation")
Reported-by: Chunyu Hu <chuhu@redhat.com>
Tested-by: Chunyu Hu <chuhu@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
There's a small race when function graph shutsdown and the calling of the
registered function graph entry callback. The callback must not reference
the task's ret_stack without first checking that it is not NULL. Note, when
a ret_stack is allocated for a task, it stays allocated until the task exits.
The problem here, is that function_graph is shutdown, and a new task was
created, which doesn't have its ret_stack allocated. But since some of the
functions are still being traced, the callbacks can still be called.
The normal function_graph code handles this, but starting with commit
8861dd303c ("ftrace: Access ret_stack->subtime only in the function
profiler") the profiler code references the ret_stack on function entry, but
doesn't check if it is NULL first.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=196611
Cc: stable@vger.kernel.org
Fixes: 8861dd303c ("ftrace: Access ret_stack->subtime only in the function profiler")
Reported-by: lilydjwg@gmail.com
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
When a timer base is idle, it is forwarded when a new timer is added
to ensure that granularity does not become excessive. When not idle,
the timer tick is expected to increment the base.
However there are several problems:
- If an existing timer is modified, the base is forwarded only after
the index is calculated.
- The base is not forwarded by add_timer_on.
- There is a window after a timer is restarted from a nohz idle, after
it is marked not-idle and before the timer tick on this CPU, where a
timer may be added but the ancient base does not get forwarded.
These result in excessive granularity (a 1 jiffy timeout can blow out
to 100s of jiffies), which cause the rcu lockup detector to trigger,
among other things.
Fix this by keeping track of whether the timer base has been idle
since it was last run or forwarded, and if so then forward it before
adding a new timer.
There is still a case where mod_timer optimises the case of a pending
timer mod with the same expiry time, where the timer can see excessive
granularity relative to the new, shorter interval. A comment is added,
but it's not changed because it is an important fastpath for
networking.
This has been tested and found to fix the RCU softlockup messages.
Testing was also done with tracing to measure requested versus
achieved wakeup latencies for all non-deferrable timers in an idle
system (with no lockup watchdogs running). Wakeup latency relative to
absolute latency is calculated (note this suffers from round-up skew
at low absolute times) and analysed:
max avg std
upstream 506.0 1.20 4.68
patched 2.0 1.08 0.15
The bug was noticed due to the lockup detector Kconfig changes
dropping it out of people's .configs and resulting in larger base
clk skew When the lockup detectors are enabled, no CPU can go idle for
longer than 4 seconds, which limits the granularity errors.
Sub-optimal timer behaviour is observable on a smaller scale in that
case:
max avg std
upstream 9.0 1.05 0.19
patched 2.0 1.04 0.11
Fixes: Fixes: a683f390b9 ("timers: Forward the wheel clock whenever possible")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: David Miller <davem@davemloft.net>
Cc: dzickus@redhat.com
Cc: sfr@canb.auug.org.au
Cc: mpe@ellerman.id.au
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: linuxarm@huawei.com
Cc: abdhalee@linux.vnet.ibm.com
Cc: John Stultz <john.stultz@linaro.org>
Cc: akpm@linux-foundation.org
Cc: paulmck@linux.vnet.ibm.com
Cc: torvalds@linux-foundation.org
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20170822084348.21436-1-npiggin@gmail.com
No need to test for it in fast-path, every dev in bpf_dtab_netdev
is guaranteed to be non-NULL, otherwise dev_map_update_elem() will
fail in the first place.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The liveness tracking algorithm is quite subtle; add comments to explain it.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The optimisation it does is broken when the 'new' register value has a
variable offset and the 'old' was constant. I broke it with my pointer
types unification (see Fixes tag below), before which the 'new' value
would have type PTR_TO_MAP_VALUE_ADJ and would thus not compare equal;
other changes in that patch mean that its original behaviour (ignore
min/max values) cannot be restored.
Tests on a sample set of cilium programs show no change in count of
processed instructions.
Fixes: f1174f77b5 ("bpf/verifier: rework value tracking")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The fact that writes occurred in reaching the continuation state does
not screen off its reads from us, because we're not really its parent.
So detect 'not really the parent' in do_propagate_liveness, and ignore
write marks in that case.
Fixes: dc503a8ad9 ("bpf/verifier: track liveness for pruning")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This way we don't need a block_device structure to submit I/O. The
block_device has different life time rules from the gendisk and
request_queue and is usually only available when the block device node
is open. Other callers need to explicitly create one (e.g. the lightnvm
passthrough code, or the new nvme multipathing code).
For the actual I/O path all that we need is the gendisk, which exists
once per block device. But given that the block layer also does
partition remapping we additionally need a partition index, which is
used for said remapping in generic_make_request.
Note that all the block drivers generally want request_queue or
sometimes the gendisk, so this removes a layer of indirection all
over the stack.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Workqueues don't use signals, it (ab)uses TASK_INTERRUPTIBLE to avoid
increasing the loadavg numbers. We've 'recently' introduced TASK_IDLE
for this case:
80ed87c8a9 ("sched/wait: Introduce TASK_NOLOAD and TASK_IDLE")
use it.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
When assigning an interrupt to a vcpu, it is not unlikely that
the level of the hierarchy implementing irq_set_vcpu_affinity
is not the top level (think a generic MSI domain on top of a
virtualization aware interrupt controller).
In such a case, let's iterate over the hierarchy until we find
an irqchip implementing it.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Some minor code cleanups, while going over it I also noticed that
we're accounting the bitmap only for one CPU currently, so fix that
up as well.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, iproute2's BPF ELF loader works fine with array of maps
when retrieving the fd from a pinned node and doing a selfcheck
against the provided map attributes from the object file, but we
fail to do the same for hash of maps and thus refuse to get the
map from pinned node.
Reason is that when allocating hash of maps, fd_htab_map_alloc() will
set the value size to sizeof(void *), and any user space map creation
requests are forced to set 4 bytes as value size. Thus, selfcheck
will complain about exposed 8 bytes on 64 bit archs vs. 4 bytes from
object file as value size. Contract is that fdinfo or BPF_MAP_GET_FD_BY_ID
returns the value size used to create the map.
Fix it by handling it the same way as we do for array of maps, which
means that we leave value size at 4 bytes and in the allocation phase
round up value size to 8 bytes. alloc_htab_elem() needs an adjustment
in order to copy rounded up 8 bytes due to bpf_fd_htab_map_update_elem()
calling into htab_map_update_elem() with the pointer of the map
pointer as value. Unlike array of maps where we just xchg(), we're
using the generic htab_map_update_elem() callback also used from helper
calls, which published the key/value already on return, so we need
to ensure to memcpy() the right size.
Fixes: bcc6b1b7eb ("bpf: Add hash of maps support")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, iproute2's BPF ELF loader works fine with array of maps
when retrieving the fd from a pinned node and doing a selfcheck
against the provided map attributes from the object file, but we
fail to do the same for hash of maps and thus refuse to get the
map from pinned node.
Reason is that when allocating hash of maps, fd_htab_map_alloc() will
set the value size to sizeof(void *), and any user space map creation
requests are forced to set 4 bytes as value size. Thus, selfcheck
will complain about exposed 8 bytes on 64 bit archs vs. 4 bytes from
object file as value size. Contract is that fdinfo or BPF_MAP_GET_FD_BY_ID
returns the value size used to create the map.
Fix it by handling it the same way as we do for array of maps, which
means that we leave value size at 4 bytes and in the allocation phase
round up value size to 8 bytes. alloc_htab_elem() needs an adjustment
in order to copy rounded up 8 bytes due to bpf_fd_htab_map_update_elem()
calling into htab_map_update_elem() with the pointer of the map
pointer as value. Unlike array of maps where we just xchg(), we're
using the generic htab_map_update_elem() callback also used from helper
calls, which published the key/value already on return, so we need
to ensure to memcpy() the right size.
Fixes: bcc6b1b7eb ("bpf: Add hash of maps support")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This was reported many times, and this was even mentioned in commit
52ee2dfdd4 ("pids: refactor vnr/nr_ns helpers to make them safe") but
somehow nobody bothered to fix the obvious problem: task_tgid_nr_ns() is
not safe because task->group_leader points to nowhere after the exiting
task passes exit_notify(), rcu_read_lock() can not help.
We really need to change __unhash_process() to nullify group_leader,
parent, and real_parent, but this needs some cleanups. Until then we
can turn task_tgid_nr_ns() into another user of __task_pid_nr_ns() and
fix the problem.
Reported-by: Troy Kensinger <tkensinger@google.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In the current code, dev_map_free() can still race with dev_map_notification().
In dev_map_free(), we remove dtab from the list of dtabs after we purged
all entries from it. However, we don't do xchg() with NULL or the like,
so the entry at that point is still pointing to the device. If a unregister
notification comes in at the same time, we therefore risk a double-free,
since the pointer is still present in the map, and then pushed again to
__dev_map_entry_free().
All this is completely unnecessary. Just remove the dtab from the list
right before the synchronize_rcu(), so all outstanding readers from the
notifier list have finished by then, thus we don't need to deal with this
corner case anymore and also wouldn't need to nullify dev entires. This is
fine because we iterate over the map releasing all entries and therefore
dev references anyway.
Fixes: 4cc7b9544b ("bpf: devmap fix mutex in rcu critical section")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull perf fixes from Thomas Gleixner:
"Two fixes for the perf subsystem:
- Fix an inconsistency of RDPMC mm struct tagging across exec() which
causes RDPMC to fault.
- Correct the timestamp mechanics across IOC_DISABLE/ENABLE which
causes incorrect timestamps and total time calculations"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix time on IOC_ENABLE
perf/x86: Fix RDPMC vs. mm_struct tracking
Pull irq fixes from Thomas Gleixner:
"A pile of smallish changes all over the place:
- Add a missing ISB in the GIC V1 driver
- Remove an ACPI version check in the GIC V3 ITS driver
- Add the missing irq_pm_shutdown function for BRCMSTB-L2 to avoid
spurious wakeups
- Remove the artifical limitation of ITS instances to the number of
NUMA nodes which prevents utilizing the ITS hardware correctly
- Prevent a infinite parsing loop in the GIC-V3 ITS/MSI code
- Honour the force affinity argument in the GIC-V3 driver which is
required to make perf work correctly
- Correctly report allocation failures in GIC-V2/V3 to avoid using
half allocated and initialized interrupts.
- Fixup checks against nr_cpu_ids in the generic IPI code"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/ipi: Fixup checks against nr_cpu_ids
genirq: Restore trigger settings in irq_modify_status()
MAINTAINERS: Remove Jason Cooper's irqchip git tree
irqchip/gic-v3-its-platform-msi: Fix msi-parent parsing loop
irqchip/gic-v3-its: Allow GIC ITS number more than MAX_NUMNODES
irqchip: brcmstb-l2: Define an irq_pm_shutdown function
irqchip/gic: Ensure we have an ISB between ack and ->handle_irq
irqchip/gic-v3-its: Remove ACPICA version check for ACPI NUMA
irqchip/gic-v3: Honor forced affinity setting
irqchip/gic-v3: Report failures in gic_irq_domain_alloc
irqchip/gic-v2: Report failures in gic_irq_domain_alloc
irqchip/atmel-aic: Remove root argument from ->fixup() prototype
irqchip/atmel-aic: Fix unbalanced refcount in aic_common_rtc_irq_fixup()
irqchip/atmel-aic: Fix unbalanced of_node_put() in aic_common_irq_fixup()
Pull watchdog fix from Thomas Gleixner:
"A fix for the hardlockup watchdog to prevent false positives with
extreme Turbo-Modes which make the perf/NMI watchdog fire faster than
the hrtimer which is used to verify.
Slightly larger than the minimal fix, which just would increase the
hrtimer frequency, but comes with extra overhead of more watchdog
timer interrupts and thread wakeups for all users.
With this change we restrict the overhead to the extreme Turbo-Mode
systems"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
kernel/watchdog: Prevent false positives with turbo modes
Pull timekeepig updates from John Stultz
- kselftest improvements
- Use the proper timekeeper in the debug code
- Prevent accessing an unavailable wakeup source in the alarmtimer sysfs
interface.
Valid CPU ids are [0, nr_cpu_ids-1] inclusive.
Fixes: 3b8e29a82d ("genirq: Implement ipi_send_mask/single()")
Fixes: f9bce791ae ("genirq: Add a new function to get IPI reverse mapping")
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20170819095751.GB27864@avx2
Avoid two successive functions calls for the map in map lookup, first
is the bpf_map_lookup_elem() helper call, and second the callback via
map->ops->map_lookup_elem() to get to the map in map implementation.
Implementation inlines array and htab flavor for map in map lookups.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 9015d2f595 ("bpf: inline htab_map_lookup_elem()") was
making the assumption that a direct call emission to the function
__htab_map_lookup_elem() will always work out for JITs.
This is currently true since all JITs we have are for 64 bit archs,
but in case of 32 bit JITs like upcoming arm32, we get a NULL pointer
dereference when executing the call to __htab_map_lookup_elem()
since passed arguments are of a different size (due to pointer args)
than what we do out of BPF. Guard and thus limit this for now for
the current 64 bit JITs only.
Reported-by: Shubham Bansal <illusionist.neo@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current map creation API does not allow to provide the numa-node
preference. The memory usually comes from where the map-creation-process
is running. The performance is not ideal if the bpf_prog is known to
always run in a numa node different from the map-creation-process.
One of the use case is sharding on CPU to different LRU maps (i.e.
an array of LRU maps). Here is the test result of map_perf_test on
the INNER_LRU_HASH_PREALLOC test if we force the lru map used by
CPU0 to be allocated from a remote numa node:
[ The machine has 20 cores. CPU0-9 at node 0. CPU10-19 at node 1 ]
># taskset -c 10 ./map_perf_test 512 8 1260000 8000000
5:inner_lru_hash_map_perf pre-alloc 1628380 events per sec
4:inner_lru_hash_map_perf pre-alloc 1626396 events per sec
3:inner_lru_hash_map_perf pre-alloc 1626144 events per sec
6:inner_lru_hash_map_perf pre-alloc 1621657 events per sec
2:inner_lru_hash_map_perf pre-alloc 1621534 events per sec
1:inner_lru_hash_map_perf pre-alloc 1620292 events per sec
7:inner_lru_hash_map_perf pre-alloc 1613305 events per sec
0:inner_lru_hash_map_perf pre-alloc 1239150 events per sec #<<<
After specifying numa node:
># taskset -c 10 ./map_perf_test 512 8 1260000 8000000
5:inner_lru_hash_map_perf pre-alloc 1629627 events per sec
3:inner_lru_hash_map_perf pre-alloc 1628057 events per sec
1:inner_lru_hash_map_perf pre-alloc 1623054 events per sec
6:inner_lru_hash_map_perf pre-alloc 1616033 events per sec
2:inner_lru_hash_map_perf pre-alloc 1614630 events per sec
4:inner_lru_hash_map_perf pre-alloc 1612651 events per sec
7:inner_lru_hash_map_perf pre-alloc 1609337 events per sec
0:inner_lru_hash_map_perf pre-alloc 1619340 events per sec #<<<
This patch adds one field, numa_node, to the bpf_attr. Since numa node 0
is a valid node, a new flag BPF_F_NUMA_NODE is also added. The numa_node
field is honored if and only if the BPF_F_NUMA_NODE flag is set.
Numa node selection is not supported for percpu map.
This patch does not change all the kmalloc. F.e.
'htab = kzalloc()' is not changed since the object
is small enough to stay in the cache.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In check_map_func_compatibility(), a 'break' has been accidentally
removed for the BPF_MAP_TYPE_ARRAY_OF_MAPS and BPF_MAP_TYPE_HASH_OF_MAPS
cases. This patch adds it back.
Fixes: 174a79ff95 ("bpf: sockmap with sk redirect support")
Cc: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
When forcing a signal, SIGNAL_UNKILLABLE is removed to prevent recursive
faults, but this is undesirable when tracing. For example, debugging an
init process (whether global or namespace), hitting a breakpoint and
SIGTRAP will force SIGTRAP and then remove SIGNAL_UNKILLABLE.
Everything continues fine, but then once debugging has finished, the
init process is left killable which is unlikely what the user expects,
resulting in either an accidentally killed init or an init that stops
reaping zombies.
Link: http://lkml.kernel.org/r/20170815112806.10728-1-jamie.iles@oracle.com
Signed-off-by: Jamie Iles <jamie.iles@oracle.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Recursive loops with module loading were previously handled in kmod by
restricting the number of modprobe calls to 50 and if that limit was
breached request_module() would return an error and a user would see the
following on their kernel dmesg:
request_module: runaway loop modprobe binfmt-464c
Starting init:/sbin/init exists but couldn't execute it (error -8)
This issue could happen for instance when a 64-bit kernel boots a 32-bit
userspace on some architectures and has no 32-bit binary format
hanlders. This is visible, for instance, when a CONFIG_MODULES enabled
64-bit MIPS kernel boots a into o32 root filesystem and the binfmt
handler for o32 binaries is not built-in.
After commit 6d7964a722 ("kmod: throttle kmod thread limit") we now
don't have any visible signs of an error and the kernel just waits for
the loop to end somehow.
Although this *particular* recursive loop could also be addressed by
doing a sanity check on search_binary_handler() and disallowing a
modular binfmt to be required for modprobe, a generic solution for any
recursive kernel kmod issues is still needed.
This should catch these loops. We can investigate each loop and address
each one separately as they come in, this however puts a stop gap for
them as before.
Link: http://lkml.kernel.org/r/20170809234635.13443-3-mcgrof@kernel.org
Fixes: 6d7964a722 ("kmod: throttle kmod thread limit")
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Reported-by: Matt Redfearn <matt.redfearn@imgtec.com>
Tested-by: Matt Redfearn <matt.redfearn@imgetc.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Daniel Mentz <danielmentz@google.com>
Cc: David Binderman <dcb314@hotmail.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jessica Yu <jeyu@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Michal Marek <mmarek@suse.com>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
"map" is a valid pointer. We wanted to return "err" instead. Also
let's return a zero literal at the end.
Fixes: 174a79ff95 ("bpf: sockmap with sk redirect support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cpuset v2 has some useful behaviors that are not present in v1 because
of backward compatibility concern. One of that is the restoration of
the original cpu and memory node mask after a hot removal and addition
event sequence.
This patch makes the cpuset controller to check the
CGRP_ROOT_CPUSET_V2_MODE flag and use the v2 behavior if it is set.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
A new mount option "cpuset_v2_mode" is added to the v1 cgroupfs
filesystem to enable cpuset controller to use v2 behavior in a v1
cgroup. This mount option applies only to cpuset controller and have
no effect on other controllers.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Use rlimit() and rlimit_max() helper instead of manually writing
whole chain from task to rlimit value
Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170705172548.7911-1-k.opasiak@samsung.com
The hardlockup detector on x86 uses a performance counter based on unhalted
CPU cycles and a periodic hrtimer. The hrtimer period is about 2/5 of the
performance counter period, so the hrtimer should fire 2-3 times before the
performance counter NMI fires. The NMI code checks whether the hrtimer
fired since the last invocation. If not, it assumess a hard lockup.
The calculation of those periods is based on the nominal CPU
frequency. Turbo modes increase the CPU clock frequency and therefore
shorten the period of the perf/NMI watchdog. With extreme Turbo-modes (3x
nominal frequency) the perf/NMI period is shorter than the hrtimer period
which leads to false positives.
A simple fix would be to shorten the hrtimer period, but that comes with
the side effect of more frequent hrtimer and softlockup thread wakeups,
which is not desired.
Implement a low pass filter, which checks the perf/NMI period against
kernel time. If the perf/NMI fires before 4/5 of the watchdog period has
elapsed then the event is ignored and postponed to the next perf/NMI.
That solves the problem and avoids the overhead of shorter hrtimer periods
and more frequent softlockup thread wakeups.
Fixes: 58687acba5 ("lockup_detector: Combine nmi_watchdog and softlockup detector")
Reported-and-tested-by: Kan Liang <Kan.liang@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: dzickus@redhat.com
Cc: prarit@redhat.com
Cc: ak@linux.intel.com
Cc: babu.moger@oracle.com
Cc: peterz@infradead.org
Cc: eranian@google.com
Cc: acme@redhat.com
Cc: stable@vger.kernel.org
Cc: atomlin@redhat.com
Cc: akpm@linux-foundation.org
Cc: torvalds@linux-foundation.org
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1708150931310.1886@nanos
irq_modify_status starts by clearing the trigger settings from
irq_data before applying the new settings, but doesn't restore them,
leaving them to IRQ_TYPE_NONE.
That's pretty confusing to the potential request_irq() that could
follow. Instead, snapshot the settings before clearing them, and restore
them if the irq_modify_status() invocation was not changing the trigger.
Fixes: 1e2a7d7849 ("irqdomain: Don't set type when mapping an IRQ")
Reported-and-tested-by: jeffy <jeffy.chen@rock-chips.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jon Hunter <jonathanh@nvidia.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20170818095345.12378-1-marc.zyngier@arm.com
For an already existing irqdomain hierarchy, as might be obtained via
a call to pci_enable_msix_range(), a PCI driver wishing to add an
additional irqdomain to the hierarchy needs to be able to insert the
irqdomain to that already initialized hierarchy. Calling
irq_domain_create_hierarchy() allows the new irqdomain to be created,
but no existing code allows for initializing the associated irq_data.
Add a couple of helper functions (irq_domain_push_irq() and
irq_domain_pop_irq()) to initialize the irq_data for the new
irqdomain added to an existing hierarchy.
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
Link: http://lkml.kernel.org/r/1503017616-3252-6-git-send-email-david.daney@cavium.com
A follow-on patch will call irq_domain_free_irqs_hierarchy() when the
free() function pointer may be NULL.
Add a NULL pointer check to handle this new use case.
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
Link: http://lkml.kernel.org/r/1503017616-3252-5-git-send-email-david.daney@cavium.com
The code to add and remove items to and from the revmap occurs several
times.
In preparation for the follow on patches that add more uses of this
code, factor this out in to separate static functions.
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
Link: http://lkml.kernel.org/r/1503017616-3252-4-git-send-email-david.daney@cavium.com
Follow-on patch for gpio-thunderx uses a irqdomain hierarchy which
requires slightly different flow handlers, add them to chip.c which
contains most of the other flow handlers. Make these conditionally
compiled based on CONFIG_IRQ_FASTEOI_HIERARCHY_HANDLERS.
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
Link: http://lkml.kernel.org/r/1503017616-3252-3-git-send-email-david.daney@cavium.com
Many of the family of functions including irq_chip_mask_parent(),
irq_chip_unmask_parent() are exported, but not all.
Add EXPORT_SYMBOL_GPL to irq_chip_enable_parent,
irq_chip_disable_parent and irq_chip_set_affinity_parent, so they
likewise are usable from modules.
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
Link: http://lkml.kernel.org/r/1503017616-3252-2-git-send-email-david.daney@cavium.com
If CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK is defined, but that the
interrupt is not single target, the effective affinity reported in
/proc/irq/x/effective_affinity will be empty, which is not the truth.
Instead, use the accessor to report the affinity, which will pick
the right mask.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Gregory Clement <gregory.clement@free-electrons.com>
Cc: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Link: http://lkml.kernel.org/r/20170818083925.10108-3-marc.zyngier@arm.com
When developing new (and therefore buggy) interrupt related
code, it can sometimes be useful to inject interrupts without
having to rely on a device to actually generate them.
This functionnality relies either on the irqchip driver to
expose a irq_set_irqchip_state(IRQCHIP_STATE_PENDING) callback,
or on the core code to be able to retrigger a (edge-only)
interrupt.
To use this feature:
echo -n trigger > /sys/kernel/debug/irq/irqs/IRQNUM
WARNING: This is DANGEROUS, and strictly a debug feature.
Do not use it on a production system. Your HW is likely to
catch fire, your data to be corrupted, and reporting this will
make you look an even bigger fool than the idiot who wrote
this patch.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170818081156.9264-1-marc.zyngier@arm.com
For SoC to achieve its lowest power platform idle state a set of hardware
preconditions must be met. These preconditions or constraints can be
obtained by issuing a device specific method (_DSM) with function "1".
Refer to the document provided in the link below.
Here during initialization (from attach() callback of LPS0 device), invoke
function 1 to get the device constraints. Each enabled constraint is
stored in a table.
The devices in this table are used to check whether they were in required
minimum state, while entering suspend. This check is done from platform
freeze wake() callback, only when /sys/power/pm_debug_messages attribute
is non zero.
If any constraint is not met and device is ACPI power managed then it
prints the device information to kernel logs.
Also if debug is enabled in acpi/sleep.c, the constraint table and state
of each device on wake is dumped in kernel logs.
Since pm_debug_messages_on setting is used as condition to check
constraints outside kernel/power/main.c, pm_debug_messages_on is changed
to a global variable.
Link: http://www.uefi.org/sites/default/files/resources/Intel_ACPI_Low_Power_S0_Idle.pdf
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The frequency update from the utilization update handlers can be divided
into two parts:
(A) Finding the next frequency
(B) Updating the frequency
While any CPU can do (A), (B) can be restricted to a group of CPUs only,
depending on the current platform.
For platforms where fast cpufreq switching is possible, both (A) and (B)
are always done from the same CPU and that CPU should be capable of
changing the frequency of the target CPU.
But for platforms where fast cpufreq switching isn't possible, after
doing (A) we wake up a kthread which will eventually do (B). This
kthread is already bound to the right set of CPUs, i.e. only those which
can change the frequency of CPUs of a cpufreq policy. And so any CPU
can actually do (A) in this case, as the frequency is updated from the
right set of CPUs only.
Check cpufreq_can_do_remote_dvfs() only for the fast switching case.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Utilization update callbacks are now processed remotely, even on the
CPUs that don't share cpufreq policy with the target CPU (if
dvfs_possible_from_any_cpu flag is set).
But in non-fast switch paths, the frequency is changed only from one of
policy->related_cpus. This happens because the kthread which does the
actual update is bound to a subset of CPUs (i.e. related_cpus).
Allow frequency to be remotely updated as well (i.e. call
__cpufreq_driver_target()) if dvfs_possible_from_any_cpu flag is set.
Reported-by: Pavan Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This reverts commit 68c4a4f8ab, with
various conflict clean-ups.
The capability check required too much privilege compared to simple DAC
controls. A system builder was forced to have crash handler processes
run with CAP_SYSLOG which would give it the ability to read (and wipe)
the _current_ dmesg, which is much more access than being given access
only to the historical log stored in pstorefs.
With the prior commit to make the root directory 0750, the files are
protected by default but a system builder can now opt to give access
to a specific group (via chgrp on the pstorefs root directory) without
being forced to also give away CAP_SYSLOG.
Suggested-by: Nick Kralevich <nnk@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.cz>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Currently the alarmtimer registers a wake-up source unconditionally,
regardless of the system having a (wake-up capable) RTC or not.
Hence the alarmtimer will always show up in
/sys/kernel/debug/wakeup_sources, even if it is not available, and thus
cannot be a wake-up source.
To fix this, postpone registration until a wake-up capable RTC device is
added.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: John Stultz <john.stultz@linaro.org>
When CONFIG_DEBUG_TIMEKEEPING is enabled the timekeeping_check_update()
function will update status like last_warning and underflow_seen on the
timekeeper.
If there are issues found this state is used to rate limit the warnings
that get printed.
This rate limiting doesn't really really work if stored in real_tk as
the shadow timekeeper is overwritten onto real_tk at the end of every
update_wall_time() call, resetting last_warning and other statuses.
Fix rate limiting by using the shadow_timekeeper for
timekeeping_check_update().
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Fixes: commit 57d05a93ad ("time: Rework debugging variables so they aren't global")
Signed-off-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
In smap_do_verdict(), the fall-through branch leads to call
preempt_enable() twice for the SK_REDIRECT, which creates an
imbalance. Only enable it for all remaining cases again.
Fixes: 174a79ff95 ("bpf: sockmap with sk redirect support")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Using parent->regs[] when propagating REG_LIVE_READ for spilled regs
doesn't work since parent->regs[] denote the set of normal registers
but not spilled ones. Propagate to the correct regs.
Fixes: dc503a8ad9 ("bpf/verifier: track liveness for pruning")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is no agreed-upon definition of spin_unlock_wait()'s semantics,
and it appears that all callers could do just as well with a lock/unlock
pair. This commit therefore removes spin_unlock_wait() and related
definitions from core code.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Andrea Parri <parri.andrea@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
There is no agreed-upon definition of spin_unlock_wait()'s semantics, and
it appears that all callers could do just as well with a lock/unlock pair.
This commit therefore replaces the spin_unlock_wait() call in do_exit()
with spin_lock() followed immediately by spin_unlock(). This should be
safe from a performance perspective because the lock is a per-task lock,
and this is happening only at task-exit time.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Andrea Parri <parri.andrea@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
There is no agreed-upon definition of spin_unlock_wait()'s semantics,
and it appears that all callers could do just as well with a lock/unlock
pair. This commit therefore replaces the spin_unlock_wait() call in
completion_done() with spin_lock() followed immediately by spin_unlock().
This should be safe from a performance perspective because the lock
will be held only the wakeup happens really quickly.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Andrea Parri <parri.andrea@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Implement MEMBARRIER_CMD_PRIVATE_EXPEDITED with IPIs using cpumask built
from all runqueues for which current thread's mm is the same as the
thread calling sys_membarrier. It executes faster than the non-expedited
variant (no blocking). It also works on NOHZ_FULL configurations.
Scheduler-wise, it requires a memory barrier before and after context
switching between processes (which have different mm). The memory
barrier before context switch is already present. For the barrier after
context switch:
* Our TSO archs can do RELEASE without being a full barrier. Look at
x86 spin_unlock() being a regular STORE for example. But for those
archs, all atomics imply smp_mb and all of them have atomic ops in
switch_mm() for mm_cpumask(), and on x86 the CR3 load acts as a full
barrier.
* From all weakly ordered machines, only ARM64 and PPC can do RELEASE,
the rest does indeed do smp_mb(), so there the spin_unlock() is a full
barrier and we're good.
* ARM64 has a very heavy barrier in switch_to(), which suffices.
* PPC just removed its barrier from switch_to(), but appears to be
talking about adding something to switch_mm(). So add a
smp_mb__after_unlock_lock() for now, until this is settled on the PPC
side.
Changes since v3:
- Properly document the memory barriers provided by each architecture.
Changes since v2:
- Address comments from Peter Zijlstra,
- Add smp_mb__after_unlock_lock() after finish_lock_switch() in
finish_task_switch() to add the memory barrier we need after storing
to rq->curr. This is much simpler than the previous approach relying
on atomic_dec_and_test() in mmdrop(), which actually added a memory
barrier in the common case of switching between userspace processes.
- Return -EINVAL when MEMBARRIER_CMD_SHARED is used on a nohz_full
kernel, rather than having the whole membarrier system call returning
-ENOSYS. Indeed, CMD_PRIVATE_EXPEDITED is compatible with nohz_full.
Adapt the CMD_QUERY mask accordingly.
Changes since v1:
- move membarrier code under kernel/sched/ because it uses the
scheduler runqueue,
- only add the barrier when we switch from a kernel thread. The case
where we switch from a user-space thread is already handled by
the atomic_dec_and_test() in mmdrop().
- add a comment to mmdrop() documenting the requirement on the implicit
memory barrier.
CC: Peter Zijlstra <peterz@infradead.org>
CC: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
CC: Boqun Feng <boqun.feng@gmail.com>
CC: Andrew Hunter <ahh@google.com>
CC: Maged Michael <maged.michael@gmail.com>
CC: gromer@google.com
CC: Avi Kivity <avi@scylladb.com>
CC: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: Paul Mackerras <paulus@samba.org>
CC: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Dave Watson <davejwatson@fb.com>
The rcu_idle_exit() and rcu_idle_enter() functions are exported because
they were originally used by RCU_NONIDLE(), which was intended to
be usable from modules. However, RCU_NONIDLE() now instead uses
rcu_irq_enter_irqson() and rcu_irq_exit_irqson(), which are not
exported, and there have been no complaints.
This commit therefore removes the exports from rcu_idle_exit() and
rcu_idle_enter().
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
All current callers of rcu_idle_enter() have irqs disabled, and
rcu_idle_enter() relies on this, but doesn't check. This commit
therefore adds a RCU_LOCKDEP_WARN() to add some verification to the trust.
While we are there, pass "true" rather than "1" to rcu_eqs_enter().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
All callers to rcu_idle_enter() have irqs disabled, so there is no
point in rcu_idle_enter disabling them again. This commit therefore
replaces the irq disabling with a RCU_LOCKDEP_WARN().
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit adds assertions verifying the consistency of the rcu_node
structure's ->blkd_tasks list and its ->gp_tasks, ->exp_tasks, and
->boost_tasks pointers. In particular, the ->blkd_tasks lists must be
empty except for leaf rcu_node structures.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Set disable_rcu_irq_enter on not only rcu_eqs_enter_common() but also
rcu_eqs_exit(), since rcu_eqs_exit() suffers from the same issue as was
fixed for rcu_eqs_enter_common() by commit 03ecd3f48e ("rcu/tracing:
Add rcu_disabled to denote when rcu_irq_enter() will not work").
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The _rcu_barrier_trace() function is a wrapper for trace_rcu_barrier(),
which needs TPS() protection for strings passed through the second
argument. However, it has escaped prior TPS()-ification efforts because
it _rcu_barrier_trace() does not start with "trace_". This commit
therefore adds the needed TPS() protection
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
These RCU waits were set to use interruptible waits to avoid the kthreads
contributing to system load average, even though they are not interruptible
as they are spawned from a kthread. Use the new TASK_IDLE swaits which makes
our goal clear, and removes confusion about these paths possibly being
interruptible -- they are not.
When the system is idle the RCU grace-period kthread will spend all its time
blocked inside the swait_event_interruptible(). If the interruptible() was
not used, then this kthread would contribute to the load average. This means
that an idle system would have a load average of 2 (or 3 if PREEMPT=y),
rather than the load average of 0 that almost fifty years of UNIX has
conditioned sysadmins to expect.
The same argument applies to swait_event_interruptible_timeout() use. The
RCU grace-period kthread spends its time blocked inside this call while
waiting for grace periods to complete. In particular, if there was only one
busy CPU, but that CPU was frequently invoking call_rcu(), then the RCU
grace-period kthread would spend almost all its time blocked inside the
swait_event_interruptible_timeout(). This would mean that the load average
would be 2 rather than the expected 1 for the single busy CPU.
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There is currently event tracing to track when a task is preempted
within a preemptible RCU read-side critical section, and also when that
task subsequently reaches its outermost rcu_read_unlock(), but none
indicating when a new grace period starts when that grace period must
wait on pre-existing readers that have been been preempted at least once
since the beginning of their current RCU read-side critical sections.
This commit therefore adds an event trace at grace-period start in
the case where there are such readers. Note that only the first
reader in the list is traced.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
This commit saves a few lines in kernel/rcu/rcu.h by moving to single-line
definitions for trivial functions, instead of the old style where the
two curly braces each get their own line.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Strings used in event tracing need to be specially handled, for example,
using the TPS() macro. Without the TPS() macro, although output looks
fine from within a running kernel, extracting traces from a crash dump
produces garbage instead of strings. This commit therefore adds the TPS()
macro to some unadorned strings that were passed to event-tracing macros.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Currently, the exit-time support for TASKS_RCU is open-coded in do_exit().
This commit creates exit_tasks_rcu_start() and exit_tasks_rcu_finish()
APIs for do_exit() use. This has the benefit of confining the use of the
tasks_rcu_exit_srcu variable to one file, allowing it to become static.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The actual use of TASKS_RCU is only when PREEMPT, otherwise RCU-sched
is used instead. This commit therefore makes synchronize_rcu_tasks()
and call_rcu_tasks() available always, but mapped to synchronize_sched()
and call_rcu_sched(), respectively, when !PREEMPT. This approach also
allows some #ifdefs to be removed from rcutorture.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
With the new lockdep crossrelease feature, which checks completions usage,
a false positive is reported in the workqueue code:
> Worker A : acquired of wfc.work -> wait for cpu_hotplug_lock to be released
> Task B : acquired of cpu_hotplug_lock -> wait for lock#3 to be released
> Task C : acquired of lock#3 -> wait for completion of barr->done
> (Task C is in lru_add_drain_all_cpuslocked())
> Worker D : wait for wfc.work to be released -> will complete barr->done
Such a dead lock can not happen because Task C's barr->done and Worker D's
barr->done can not be the same instance.
The reason of this false positive is we initialize all wq_barrier::done
at insert_wq_barrier() via init_completion(), which makes them belong to
the same lock class, therefore, impossible circles are reported.
To fix this, explicitly initialize the lockdep map for wq_barrier::done
in insert_wq_barrier(), so that the lock class key of wq_barrier::done
is a subkey of the corresponding work_struct, as a result we won't build
a dependency between a wq_barrier with a unrelated work, and we can
differ wq barriers based on the related works, so the false positive
above is avoided.
Also define the empty lockdep_init_map_crosslock() for !CROSSRELEASE
to make the code simple and away from unnecessary #ifdefs.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Cc: Byungchul Park <byungchul.park@lge.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170817094622.12915-1-boqun.feng@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This implements refcount_t overflow protection on x86 without a noticeable
performance impact, though without the fuller checking of REFCOUNT_FULL.
This is done by duplicating the existing atomic_t refcount implementation
but with normally a single instruction added to detect if the refcount
has gone negative (e.g. wrapped past INT_MAX or below zero). When detected,
the handler saturates the refcount_t to INT_MIN / 2. With this overflow
protection, the erroneous reference release that would follow a wrap back
to zero is blocked from happening, avoiding the class of refcount-overflow
use-after-free vulnerabilities entirely.
Only the overflow case of refcounting can be perfectly protected, since
it can be detected and stopped before the reference is freed and left to
be abused by an attacker. There isn't a way to block early decrements,
and while REFCOUNT_FULL stops increment-from-zero cases (which would
be the state _after_ an early decrement and stops potential double-free
conditions), this fast implementation does not, since it would require
the more expensive cmpxchg loops. Since the overflow case is much more
common (e.g. missing a "put" during an error path), this protection
provides real-world protection. For example, the two public refcount
overflow use-after-free exploits published in 2016 would have been
rendered unexploitable:
http://perception-point.io/2016/01/14/analysis-and-exploitation-of-a-linux-kernel-vulnerability-cve-2016-0728/http://cyseclabs.com/page?n=02012016
This implementation does, however, notice an unchecked decrement to zero
(i.e. caller used refcount_dec() instead of refcount_dec_and_test() and it
resulted in a zero). Decrements under zero are noticed (since they will
have resulted in a negative value), though this only indicates that a
use-after-free may have already happened. Such notifications are likely
avoidable by an attacker that has already exploited a use-after-free
vulnerability, but it's better to have them reported than allow such
conditions to remain universally silent.
On first overflow detection, the refcount value is reset to INT_MIN / 2
(which serves as a saturation value) and a report and stack trace are
produced. When operations detect only negative value results (such as
changing an already saturated value), saturation still happens but no
notification is performed (since the value was already saturated).
On the matter of races, since the entire range beyond INT_MAX but before
0 is negative, every operation at INT_MIN / 2 will trap, leaving no
overflow-only race condition.
As for performance, this implementation adds a single "js" instruction
to the regular execution flow of a copy of the standard atomic_t refcount
operations. (The non-"and_test" refcount_dec() function, which is uncommon
in regular refcount design patterns, has an additional "jz" instruction
to detect reaching exactly zero.) Since this is a forward jump, it is by
default the non-predicted path, which will be reinforced by dynamic branch
prediction. The result is this protection having virtually no measurable
change in performance over standard atomic_t operations. The error path,
located in .text.unlikely, saves the refcount location and then uses UD0
to fire a refcount exception handler, which resets the refcount, handles
reporting, and returns to regular execution. This keeps the changes to
.text size minimal, avoiding return jumps and open-coded calls to the
error reporting routine.
Example assembly comparison:
refcount_inc() before:
.text:
ffffffff81546149: f0 ff 45 f4 lock incl -0xc(%rbp)
refcount_inc() after:
.text:
ffffffff81546149: f0 ff 45 f4 lock incl -0xc(%rbp)
ffffffff8154614d: 0f 88 80 d5 17 00 js ffffffff816c36d3
...
.text.unlikely:
ffffffff816c36d3: 48 8d 4d f4 lea -0xc(%rbp),%rcx
ffffffff816c36d7: 0f ff (bad)
These are the cycle counts comparing a loop of refcount_inc() from 1
to INT_MAX and back down to 0 (via refcount_dec_and_test()), between
unprotected refcount_t (atomic_t), fully protected REFCOUNT_FULL
(refcount_t-full), and this overflow-protected refcount (refcount_t-fast):
2147483646 refcount_inc()s and 2147483647 refcount_dec_and_test()s:
cycles protections
atomic_t 82249267387 none
refcount_t-fast 82211446892 overflow, untested dec-to-zero
refcount_t-full 144814735193 overflow, untested dec-to-zero, inc-from-zero
This code is a modified version of the x86 PAX_REFCOUNT atomic_t
overflow defense from the last public patch of PaX/grsecurity, based
on my understanding of the code. Changes or omissions from the original
code are mine and don't reflect the original grsecurity/PaX code. Thanks
to PaX Team for various suggestions for improvement for repurposing this
code to be a refcount-only protection.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Elena Reshetova <elena.reshetova@intel.com>
Cc: Eric Biggers <ebiggers3@gmail.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Hans Liljestrand <ishkamiel@gmail.com>
Cc: James Bottomley <James.Bottomley@hansenpartnership.com>
Cc: Jann Horn <jannh@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Serge E. Hallyn <serge@hallyn.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: arozansk@redhat.com
Cc: axboe@kernel.dk
Cc: kernel-hardening@lists.openwall.com
Cc: linux-arch <linux-arch@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170815161924.GA133115@beast
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=tP6Y
-----END PGP SIGNATURE-----
Merge tag 'audit-pr-20170816' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit fixes from Paul Moore:
"Two small fixes to the audit code, both explained well in the
respective patch descriptions, but the quick summary is one
use-after-free fix, and one silly fanotify notification flag fix"
* tag 'audit-pr-20170816' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: Receive unmount event
audit: Fix use after free in audit_remove_watch_rule()
Resolve issues with !CONFIG_BPF_SYSCALL and !STREAM_PARSER
net/core/filter.c: In function ‘do_sk_redirect_map’:
net/core/filter.c:1881:3: error: implicit declaration of function ‘__sock_map_lookup_elem’ [-Werror=implicit-function-declaration]
sk = __sock_map_lookup_elem(ri->map, ri->ifindex);
^
net/core/filter.c:1881:6: warning: assignment makes pointer from integer without a cast [enabled by default]
sk = __sock_map_lookup_elem(ri->map, ri->ifindex);
Fixes: 174a79ff95 ("bpf: sockmap with sk redirect support")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
psock will uninitialized in default case we need to do the same psock lookup
and check as in other branch. Fixes compile warning below.
kernel/bpf/sockmap.c: In function ‘smap_state_change’:
kernel/bpf/sockmap.c:156:21: warning: ‘psock’ may be used uninitialized in this function [-Wmaybe-uninitialized]
struct smap_psock *psock;
Fixes: 174a79ff95 ("bpf: sockmap with sk redirect support")
Reported-by: David Miller <davem@davemloft.net>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the devmap alloc map logic we check to ensure that the sizeof the
values are not greater than KMALLOC_MAX_SIZE. But, in the dev map case
we ensure the value size is 4bytes earlier in the function because all
values should be netdev ifindex values.
The second check is harmless but is not needed so remove it.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Recently we added a new map type called dev map used to forward XDP
packets between ports (6093ec2dc3). This patches introduces a
similar notion for sockets.
A sockmap allows users to add participating sockets to a map. When
sockets are added to the map enough context is stored with the
map entry to use the entry with a new helper
bpf_sk_redirect_map(map, key, flags)
This helper (analogous to bpf_redirect_map in XDP) is given the map
and an entry in the map. When called from a sockmap program, discussed
below, the skb will be sent on the socket using skb_send_sock().
With the above we need a bpf program to call the helper from that will
then implement the send logic. The initial site implemented in this
series is the recv_sock hook. For this to work we implemented a map
attach command to add attributes to a map. In sockmap we add two
programs a parse program and a verdict program. The parse program
uses strparser to build messages and pass them to the verdict program.
The parse programs use the normal strparser semantics. The verdict
program is of type SK_SKB.
The verdict program returns a verdict SK_DROP, or SK_REDIRECT for
now. Additional actions may be added later. When SK_REDIRECT is
returned, expected when bpf program uses bpf_sk_redirect_map(), the
sockmap logic will consult per cpu variables set by the helper routine
and pull the sock entry out of the sock map. This pattern follows the
existing redirect logic in cls and xdp programs.
This gives the flow,
recv_sock -> str_parser (parse_prog) -> verdict_prog -> skb_send_sock
\
-> kfree_skb
As an example use case a message based load balancer may use specific
logic in the verdict program to select the sock to send on.
Sample programs are provided in future patches that hopefully illustrate
the user interfaces. Also selftests are in follow-on patches.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
bpf_prog_inc_not_zero will be used by upcoming sockmap patches this
patch simply exports it so we can pull it in.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The complete_all() function modifies the completion's "done" variable to
UINT_MAX, and no other caller (wait_for_completion(), etc) will modify
it back to zero. That means that any call to complete_all() must have a
reinit_completion() before that completion can be used again.
Document this fact by the complete_all() function.
Also document that completion_done() will always return true if
complete_all() is called.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170816131202.195c2f4b@gandalf.local.home
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add a resource managed version of irq_sim_init(). This can be
conveniently used in device drivers.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-doc@vger.kernel.org
Cc: linux-gpio@vger.kernel.org
Cc: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Cc: Jonathan Cameron <jic23@kernel.org>
Link: http://lkml.kernel.org/r/20170814145318.6495-3-brgl@bgdev.pl
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Implement a simple, irq_work-based framework for simulating
interrupts. Currently the API exposes routines for initializing and
deinitializing the simulator object, enqueueing the interrupts and
retrieving the allocated interrupt numbers based on the offset of the
dummy interrupt in the simulator struct.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-doc@vger.kernel.org
Cc: linux-gpio@vger.kernel.org
Cc: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Cc: Jonathan Cameron <jic23@kernel.org>
Link: http://lkml.kernel.org/r/20170814145318.6495-2-brgl@bgdev.pl
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Pull networking fixes from David Miller:
1) Fix TCP checksum offload handling in iwlwifi driver, from Emmanuel
Grumbach.
2) In ksz DSA tagging code, free SKB if skb_put_padto() fails. From
Vivien Didelot.
3) Fix two regressions with bonding on wireless, from Andreas Born.
4) Fix build when busypoll is disabled, from Daniel Borkmann.
5) Fix copy_linear_skb() wrt. SO_PEEK_OFF, from Eric Dumazet.
6) Set SKB cached route properly in inet_rtm_getroute(), from Florian
Westphal.
7) Fix PCI-E relaxed ordering handling in cxgb4 driver, from Ding
Tianhong.
8) Fix module refcnt leak in ULP code, from Sabrina Dubroca.
9) Fix use of GFP_KERNEL in atomic contexts in AF_KEY code, from Eric
Dumazet.
10) Need to purge socket write queue in dccp_destroy_sock(), also from
Eric Dumazet.
11) Make bpf_trace_printk() work properly on 32-bit architectures, from
Daniel Borkmann.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (47 commits)
bpf: fix bpf_trace_printk on 32 bit archs
PCI: fix oops when try to find Root Port for a PCI device
sfc: don't try and read ef10 data on non-ef10 NIC
net_sched: remove warning from qdisc_hash_add
net_sched/sfq: update hierarchical backlog when drop packet
net_sched: reset pointers to tcf blocks in classful qdiscs' destructors
ipv4: fix NULL dereference in free_fib_info_rcu()
net: Fix a typo in comment about sock flags.
ipv6: fix NULL dereference in ip6_route_dev_notify()
tcp: fix possible deadlock in TCP stack vs BPF filter
dccp: purge write queue in dccp_destroy_sock()
udp: fix linear skb reception with PEEK_OFF
ipv6: release rt6->rt6i_idev properly during ifdown
af_key: do not use GFP_KERNEL in atomic contexts
tcp: ulp: avoid module refcnt leak in tcp_set_ulp
net/cxgb4vf: Use new PCI_DEV_FLAGS_NO_RELAXED_ORDERING flag
net/cxgb4: Use new PCI_DEV_FLAGS_NO_RELAXED_ORDERING flag
PCI: Disable Relaxed Ordering Attributes for AMD A1100
PCI: Disable Relaxed Ordering for some Intel processors
PCI: Disable PCIe Relaxed Ordering if unsupported
...
James reported that on MIPS32 bpf_trace_printk() is currently
broken while MIPS64 works fine:
bpf_trace_printk() uses conditional operators to attempt to
pass different types to __trace_printk() depending on the
format operators. This doesn't work as intended on 32-bit
architectures where u32 and long are passed differently to
u64, since the result of C conditional operators follows the
"usual arithmetic conversions" rules, such that the values
passed to __trace_printk() will always be u64 [causing issues
later in the va_list handling for vscnprintf()].
For example the samples/bpf/tracex5 test printed lines like
below on MIPS32, where the fd and buf have come from the u64
fd argument, and the size from the buf argument:
[...] 1180.941542: 0x00000001: write(fd=1, buf= (null), size=6258688)
Instead of this:
[...] 1625.616026: 0x00000001: write(fd=1, buf=009e4000, size=512)
One way to get it working is to expand various combinations
of argument types into 8 different combinations for 32 bit
and 64 bit kernels. Fix tested by James on MIPS32 and MIPS64
as well that it resolves the issue.
Fixes: 9c959c863f ("tracing: Allow BPF programs to call bpf_trace_printk()")
Reported-by: James Hogan <james.hogan@imgtec.com>
Tested-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
State of a register doesn't matter if it wasn't read in reaching an exit;
a write screens off all reads downstream of it from all explored_states
upstream of it.
This allows us to prune many more branches; here are some processed insn
counts for some Cilium programs:
Program before after
bpf_lb_opt_-DLB_L3.o 6515 3361
bpf_lb_opt_-DLB_L4.o 8976 5176
bpf_lb_opt_-DUNKNOWN.o 2960 1137
bpf_lxc_opt_-DDROP_ALL.o 95412 48537
bpf_lxc_opt_-DUNKNOWN.o 141706 78718
bpf_netdev.o 24251 17995
bpf_overlay.o 10999 9385
The runtime is also improved; here are 'time' results in ms:
Program before after
bpf_lb_opt_-DLB_L3.o 24 6
bpf_lb_opt_-DLB_L4.o 26 11
bpf_lb_opt_-DUNKNOWN.o 11 2
bpf_lxc_opt_-DDROP_ALL.o 1288 139
bpf_lxc_opt_-DUNKNOWN.o 1768 234
bpf_netdev.o 62 31
bpf_overlay.o 15 13
Signed-off-by: Edward Cree <ecree@solarflare.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Although audit_watch_handle_event() can handle FS_UNMOUNT event, it is
not part of AUDIT_FS_WATCH mask and thus such event never gets to
audit_watch_handle_event(). Thus fsnotify marks are deleted by fsnotify
subsystem on unmount without audit being notified about that which leads
to a strange state of existing audit rules with dead fsnotify marks.
Add FS_UNMOUNT to the mask of events to be received so that audit can
clean up its state accordingly.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Paul Moore <paul@paul-moore.com>
audit_remove_watch_rule() drops watch's reference to parent but then
continues to work with it. That is not safe as parent can get freed once
we drop our reference. The following is a trivial reproducer:
mount -o loop image /mnt
touch /mnt/file
auditctl -w /mnt/file -p wax
umount /mnt
auditctl -D
<crash in fsnotify_destroy_mark()>
Grab our own reference in audit_remove_watch_rule() earlier to make sure
mark does not get freed under us.
CC: stable@vger.kernel.org
Reported-by: Tony Jones <tonyj@suse.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Tested-by: Tony Jones <tonyj@suse.de>
Signed-off-by: Paul Moore <paul@paul-moore.com>
In some cases, an architecture might wish its stacks to be aligned to a
boundary larger than THREAD_SIZE. For example, using an alignment of
double THREAD_SIZE can allow for stack overflows smaller than
THREAD_SIZE to be detected by checking a single bit of the stack
pointer.
This patch allows architectures to override the alignment of VMAP'd
stacks, by defining THREAD_ALIGN. Where not defined, this defaults to
THREAD_SIZE, as is the case today.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: linux-kernel@vger.kernel.org
The error variable in do_syslog() is preemptively set to the error code
before the error condition is checked, and then set to 0 if the error
condition is not encountered. This is not necessary, as it is likely
simpler to return immediately upon encountering the error condition. A
redundant set of the error variable to 0 is also removed.
This patch has been build-tested on x86_64, but not tested for
functionality.
Link: http://lkml.kernel.org/r/20170730033636.GA935@vostro
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Nikitas Angelinas <nikitas.angelinas@gmail.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Pull RCU fix from Paul McKenney:
" This pull request is for an RCU change that permits waiting for grace
periods started by CPUs late in the process of going offline. Lack of
this capability is causing failures:
http://lkml.kernel.org/r/db9c91f6-1b17-6136-84f0-03c3c2581ab4@codeaurora.org"
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Right now, SECCOMP_RET_KILL_THREAD (neé SECCOMP_RET_KILL) kills the
current thread. There have been a few requests for this to kill the entire
process (the thread group). This cannot be just changed (discovered when
adding coredump support since coredumping kills the entire process)
because there are userspace programs depending on the thread-kill
behavior.
Instead, implement SECCOMP_RET_KILL_PROCESS, which is 0x80000000, and can
be processed as "-1" by the kernel, below the existing RET_KILL that is
ABI-set to "0". For userspace, SECCOMP_RET_ACTION_FULL is added to expand
the mask to the signed bit. Old userspace using the SECCOMP_RET_ACTION
mask will see SECCOMP_RET_KILL_PROCESS as 0 still, but this would only
be visible when examining the siginfo in a core dump from a RET_KILL_*,
where it will think it was thread-killed instead of process-killed.
Attempts to introduce this behavior via other ways (filter flags,
seccomp struct flags, masked RET_DATA bits) all come with weird
side-effects and baggage. This change preserves the central behavioral
expectations of the seccomp filter engine without putting too great
a burden on changes needed in userspace to use the new action.
The new action is discoverable by userspace through either the new
actions_avail sysctl or through the SECCOMP_GET_ACTION_AVAIL seccomp
operation. If used without checking for availability, old kernels
will treat RET_KILL_PROCESS as RET_KILL_THREAD (since the old mask
will produce RET_KILL_THREAD).
Cc: Paul Moore <paul@paul-moore.com>
Cc: Fabricio Voznika <fvoznika@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
This introduces the BPF return value for SECCOMP_RET_KILL_PROCESS to kill
an entire process. This cannot yet be reached by seccomp, but it changes
the default-kill behavior (for unknown return values) from kill-thread to
kill-process.
Signed-off-by: Kees Cook <keescook@chromium.org>
In preparation for adding SECCOMP_RET_KILL_PROCESS, rename SECCOMP_RET_KILL
to the more accurate SECCOMP_RET_KILL_THREAD.
The existing selftest values are intentionally left as SECCOMP_RET_KILL
just to be sure we're exercising the alias.
Signed-off-by: Kees Cook <keescook@chromium.org>
Add a new action, SECCOMP_RET_LOG, that logs a syscall before allowing
the syscall. At the implementation level, this action is identical to
the existing SECCOMP_RET_ALLOW action. However, it can be very useful when
initially developing a seccomp filter for an application. The developer
can set the default action to be SECCOMP_RET_LOG, maybe mark any
obviously needed syscalls with SECCOMP_RET_ALLOW, and then put the
application through its paces. A list of syscalls that triggered the
default action (SECCOMP_RET_LOG) can be easily gleaned from the logs and
that list can be used to build the syscall whitelist. Finally, the
developer can change the default action to the desired value.
This provides a more friendly experience than seeing the application get
killed, then updating the filter and rebuilding the app, seeing the
application get killed due to a different syscall, then updating the
filter and rebuilding the app, etc.
The functionality is similar to what's supported by the various LSMs.
SELinux has permissive mode, AppArmor has complain mode, SMACK has
bring-up mode, etc.
SECCOMP_RET_LOG is given a lower value than SECCOMP_RET_ALLOW as allow
while logging is slightly more restrictive than quietly allowing.
Unfortunately, the tests added for SECCOMP_RET_LOG are not capable of
inspecting the audit log to verify that the syscall was logged.
With this patch, the logic for deciding if an action will be logged is:
if action == RET_ALLOW:
do not log
else if action == RET_KILL && RET_KILL in actions_logged:
log
else if action == RET_LOG && RET_LOG in actions_logged:
log
else if filter-requests-logging && action in actions_logged:
log
else if audit_enabled && process-is-being-audited:
log
else:
do not log
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Add a new filter flag, SECCOMP_FILTER_FLAG_LOG, that enables logging for
all actions except for SECCOMP_RET_ALLOW for the given filter.
SECCOMP_RET_KILL actions are always logged, when "kill" is in the
actions_logged sysctl, and SECCOMP_RET_ALLOW actions are never logged,
regardless of this flag.
This flag can be used to create noisy filters that result in all
non-allowed actions to be logged. A process may have one noisy filter,
which is loaded with this flag, as well as a quiet filter that's not
loaded with this flag. This allows for the actions in a set of filters
to be selectively conveyed to the admin.
Since a system could have a large number of allocated seccomp_filter
structs, struct packing was taken in consideration. On 64 bit x86, the
new log member takes up one byte of an existing four byte hole in the
struct. On 32 bit x86, the new log member creates a new four byte hole
(unavoidable) and consumes one of those bytes.
Unfortunately, the tests added for SECCOMP_FILTER_FLAG_LOG are not
capable of inspecting the audit log to verify that the actions taken in
the filter were logged.
With this patch, the logic for deciding if an action will be logged is:
if action == RET_ALLOW:
do not log
else if action == RET_KILL && RET_KILL in actions_logged:
log
else if filter-requests-logging && action in actions_logged:
log
else if audit_enabled && process-is-being-audited:
log
else:
do not log
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Adminstrators can write to this sysctl to set the seccomp actions that
are allowed to be logged. Any actions not found in this sysctl will not
be logged.
For example, all SECCOMP_RET_KILL, SECCOMP_RET_TRAP, and
SECCOMP_RET_ERRNO actions would be loggable if "kill trap errno" were
written to the sysctl. SECCOMP_RET_TRACE actions would not be logged
since its string representation ("trace") wasn't present in the sysctl
value.
The path to the sysctl is:
/proc/sys/kernel/seccomp/actions_logged
The actions_avail sysctl can be read to discover the valid action names
that can be written to the actions_logged sysctl with the exception of
"allow". SECCOMP_RET_ALLOW actions cannot be configured for logging.
The default setting for the sysctl is to allow all actions to be logged
except SECCOMP_RET_ALLOW. While only SECCOMP_RET_KILL actions are
currently logged, an upcoming patch will allow applications to request
additional actions to be logged.
There's one important exception to this sysctl. If a task is
specifically being audited, meaning that an audit context has been
allocated for the task, seccomp will log all actions other than
SECCOMP_RET_ALLOW despite the value of actions_logged. This exception
preserves the existing auditing behavior of tasks with an allocated
audit context.
With this patch, the logic for deciding if an action will be logged is:
if action == RET_ALLOW:
do not log
else if action == RET_KILL && RET_KILL in actions_logged:
log
else if audit_enabled && task-is-being-audited:
log
else:
do not log
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Userspace code that needs to check if the kernel supports a given action
may not be able to use the /proc/sys/kernel/seccomp/actions_avail
sysctl. The process may be running in a sandbox and, therefore,
sufficient filesystem access may not be available. This patch adds an
operation to the seccomp(2) syscall that allows userspace code to ask
the kernel if a given action is available.
If the action is supported by the kernel, 0 is returned. If the action
is not supported by the kernel, -1 is returned with errno set to
-EOPNOTSUPP. If this check is attempted on a kernel that doesn't support
this new operation, -1 is returned with errno set to -EINVAL meaning
that userspace code will have the ability to differentiate between the
two error cases.
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Suggested-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Kees Cook <keescook@chromium.org>
This patch creates a read-only sysctl containing an ordered list of
seccomp actions that the kernel supports. The ordering, from left to
right, is the lowest action value (kill) to the highest action value
(allow). Currently, a read of the sysctl file would return "kill trap
errno trace allow". The contents of this sysctl file can be useful for
userspace code as well as the system administrator.
The path to the sysctl is:
/proc/sys/kernel/seccomp/actions_avail
libseccomp and other userspace code can easily determine which actions
the current kernel supports. The set of actions supported by the current
kernel may be different than the set of action macros found in kernel
headers that were installed where the userspace code was built.
In addition, this sysctl will allow system administrators to know which
actions are supported by the kernel and make it easier to configure
exactly what seccomp logs through the audit subsystem. Support for this
level of logging configuration will come in a future patch.
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Both the upcoming logging improvements and changes to RET_KILL will need
to know which filter a given seccomp return value originated from. In
order to delay logic processing of result until after the seccomp loop,
this adds a single pointer assignment on matches. This will allow both
log and RET_KILL logic to work off the filter rather than doing more
expensive tests inside the time-critical run_filters loop.
Running tight cycles of getpid() with filters attached shows no measurable
difference in speed.
Suggested-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Tyler Hicks <tyhicks@canonical.com>
As Boqun Feng pointed out, current->hist_id should be aligned with the
latest valid xhlock->hist_id so that hist_id_save[] storing current->hist_id
can be comparable with xhlock->hist_id. Fix it.
Additionally, the condition for overwrite-detection should be the
opposite. Fix the code and the comments as well.
<- direction to visit
hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh (h: history)
^^ ^
|| start from here
|previous entry
current entry
Reported-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Byungchul Park <byungchul.park@lge.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: akpm@linux-foundation.org
Cc: kernel-team@lge.com
Cc: kirill@shutemov.name
Cc: linux-mm@kvack.org
Cc: npiggin@gmail.com
Cc: walken@google.com
Cc: willy@infradead.org
Link: http://lkml.kernel.org/r/1502694052-16085-3-git-send-email-byungchul.park@lge.com
[ Improve the comments some more. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
struct irq_desc does not have a member named "act". The correct
name is "action".
Currently, all users of this macro use an iterator named "action".
If a different name is used, it will cause a build error.
Fixes: f944b5a7af ("genirq: Use a common macro to go through the actions list")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Link: http://lkml.kernel.org/r/1502260341-28184-1-git-send-email-yamada.masahiro@socionext.com
There is no agreed-upon definition of spin_unlock_wait()'s semantics,
and it appears that all callers could do just as well with a lock/unlock
pair. This commit therefore replaces the spin_unlock_wait() call in
do_task_dead() with spin_lock() followed immediately by spin_unlock().
This should be safe from a performance perspective because the lock is
this tasks ->pi_lock, and this is called only after the task exits.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Andrea Parri <parri.andrea@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
[ paulmck: Drop smp_mb() based on Peter Zijlstra's analysis:
http://lkml.kernel.org/r/20170811144150.26gowhxte7ri5fpk@hirez.programming.kicks-ass.net ]
"descendants" and "depth" are declared as int, so they can't be larger
than INT_MAX. Static checkers complain and it's slightly confusing for
humans as well so let's just remove these conditions.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Misc trivial changes to prepare for future changes. No functional
difference.
* Expose cgroup_get(), cgroup_tryget() and cgroup_parent().
* Implement task_dfl_cgroup() which dereferences css_set->dfl_cgrp.
* Rename cgroup_stats_show() to cgroup_stat_show() for consistency
with the file name.
Signed-off-by: Tejun Heo <tj@kernel.org>
Conflicts:
include/linux/mm_types.h
mm/huge_memory.c
I removed the smp_mb__before_spinlock() like the following commit does:
8b1b436dd1 ("mm, locking: Rework {set,clear,mm}_tlb_flush_pending()")
and fixed up the affected commits.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Rename struct platform_freeze_ops to platform_s2idle_ops to make it
clear that the callbacks in it are used during suspend-to-idle
suspend/resume transitions and rename the related functions,
variables and so on accordingly.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rename the ->enter_freeze cpuidle driver callback to ->enter_s2idle
to make it clear that it is used for entering suspend-to-idle and
rename the related functions, variables and so on accordingly.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rename the freeze_state enum representing the suspend-to-idle state
machine states to s2idle_states and rename the related variables and
functions accordingly.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
To make it clear that the symbol in question refers to
suspend-to-idle, rename it from PM_SUSPEND_FREEZE to
PM_SUSPEND_TO_IDLE.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Patch series "fixes of TLB batching races", v6.
It turns out that Linux TLB batching mechanism suffers from various
races. Races that are caused due to batching during reclamation were
recently handled by Mel and this patch-set deals with others. The more
fundamental issue is that concurrent updates of the page-tables allow
for TLB flushes to be batched on one core, while another core changes
the page-tables. This other core may assume a PTE change does not
require a flush based on the updated PTE value, while it is unaware that
TLB flushes are still pending.
This behavior affects KSM (which may result in memory corruption) and
MADV_FREE and MADV_DONTNEED (which may result in incorrect behavior). A
proof-of-concept can easily produce the wrong behavior of MADV_DONTNEED.
Memory corruption in KSM is harder to produce in practice, but was
observed by hacking the kernel and adding a delay before flushing and
replacing the KSM page.
Finally, there is also one memory barrier missing, which may affect
architectures with weak memory model.
This patch (of 7):
Setting and clearing mm->tlb_flush_pending can be performed by multiple
threads, since mmap_sem may only be acquired for read in
task_numa_work(). If this happens, tlb_flush_pending might be cleared
while one of the threads still changes PTEs and batches TLB flushes.
This can lead to the same race between migration and
change_protection_range() that led to the introduction of
tlb_flush_pending. The result of this race was data corruption, which
means that this patch also addresses a theoretically possible data
corruption.
An actual data corruption was not observed, yet the race was was
confirmed by adding assertion to check tlb_flush_pending is not set by
two threads, adding artificial latency in change_protection_range() and
using sysctl to reduce kernel.numa_balancing_scan_delay_ms.
Link: http://lkml.kernel.org/r/20170802000818.4760-2-namit@vmware.com
Fixes: 2084140594 ("mm: fix TLB flush race between migration, and
change_protection_range")
Signed-off-by: Nadav Amit <namit@vmware.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As Tetsuo points out:
"Commit 385386cff4 ("mm: vmstat: move slab statistics from zone to
node counters") broke "Slab:" field of /proc/meminfo . It shows nearly
0kB"
In addition to /proc/meminfo, this problem also affects the slab
counters OOM/allocation failure info dumps, can cause early -ENOMEM from
overcommit protection, and miscalculate image size requirements during
suspend-to-disk.
This is because the patch in question switched the slab counters from
the zone level to the node level, but forgot to update the global
accessor functions to read the aggregate node data instead of the
aggregate zone data.
Use global_node_page_state() to access the global slab counters.
Fixes: 385386cff4 ("mm: vmstat: move slab statistics from zone to node counters")
Link: http://lkml.kernel.org/r/20170801134256.5400-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Stefan Agner <stefan@agner.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Its kzalloc() not kmalloc() which has failed earlier. While here
remove a redundant empty line.
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20170802084300.29487-1-khandual@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In commit:
3fed382b46 ("sched/numa: Implement NUMA node level wake_affine()")
Rik changed wake_affine to consider NUMA information when balancing
between LLC domains.
There are a number of problems here which this patch tries to address:
- LLC < NODE; in this case we'd use the wrong information to balance
- !NUMA_BALANCING: in this case, the new code doesn't do any
balancing at all
- re-computes the NUMA data for every wakeup, this can mean iterating
up to 64 CPUs for every wakeup.
- default affine wakeups inside a cache
We address these by saving the load/capacity values for each
sched_domain during regular load-balance and using these values in
wake_affine_llc(). The obvious down-side to using cached values is
that they can be too old and poorly reflect reality.
But this way we can use LLC wide information and thus not rely on
assuming LLC matches NODE. We also don't rely on NUMA_BALANCING nor do
we have to aggegate two nodes (or even cache domains) worth of CPUs
for each wakeup.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Fixes: 3fed382b46 ("sched/numa: Implement NUMA node level wake_affine()")
[ Minor readability improvements. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Although wait_for_completion() and its family can cause deadlock, the
lock correctness validator could not be applied to them until now,
because things like complete() are usually called in a different context
from the waiting context, which violates lockdep's assumption.
Thanks to CONFIG_LOCKDEP_CROSSRELEASE, we can now apply the lockdep
detector to those completion operations. Applied it.
Signed-off-by: Byungchul Park <byungchul.park@lge.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: akpm@linux-foundation.org
Cc: boqun.feng@gmail.com
Cc: kernel-team@lge.com
Cc: kirill@shutemov.name
Cc: npiggin@gmail.com
Cc: walken@google.com
Cc: willy@infradead.org
Link: http://lkml.kernel.org/r/1502089981-21272-10-git-send-email-byungchul.park@lge.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
No acquisition might be in progress on commit of a crosslock. Completion
operations enabling crossrelease are the case like:
CONTEXT X CONTEXT Y
--------- ---------
trigger completion context
complete AX
commit AX
wait_for_complete AX
acquire AX
wait
where AX is a crosslock.
When no acquisition is in progress, we should not perform commit because
the lock does not exist, which might cause incorrect memory access. So
we have to track the number of acquisitions of a crosslock to handle it.
Moreover, in case that more than one acquisition of a crosslock are
overlapped like:
CONTEXT W CONTEXT X CONTEXT Y CONTEXT Z
--------- --------- --------- ---------
acquire AX (gen_id: 1)
acquire A
acquire AX (gen_id: 10)
acquire B
commit AX
acquire C
commit AX
where A, B and C are typical locks and AX is a crosslock.
Current crossrelease code performs commits in Y and Z with gen_id = 10.
However, we can use gen_id = 1 to do it, since not only 'acquire AX in X'
but 'acquire AX in W' also depends on each acquisition in Y and Z until
their commits. So make it use gen_id = 1 instead of 10 on their commits,
which adds an additional dependency 'AX -> A' in the example above.
Signed-off-by: Byungchul Park <byungchul.park@lge.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: akpm@linux-foundation.org
Cc: boqun.feng@gmail.com
Cc: kernel-team@lge.com
Cc: kirill@shutemov.name
Cc: npiggin@gmail.com
Cc: walken@google.com
Cc: willy@infradead.org
Link: http://lkml.kernel.org/r/1502089981-21272-8-git-send-email-byungchul.park@lge.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The ring buffer can be overwritten by hardirq/softirq/work contexts.
That cases must be considered on rollback or commit. For example,
|<------ hist_lock ring buffer size ----->|
ppppppppppppiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
wrapped > iiiiiiiiiiiiiiiiiiiiiii....................
where 'p' represents an acquisition in process context,
'i' represents an acquisition in irq context.
On irq exit, crossrelease tries to rollback idx to original position,
but it should not because the entry already has been invalid by
overwriting 'i'. Avoid rollback or commit for entries overwritten.
Signed-off-by: Byungchul Park <byungchul.park@lge.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: akpm@linux-foundation.org
Cc: boqun.feng@gmail.com
Cc: kernel-team@lge.com
Cc: kirill@shutemov.name
Cc: npiggin@gmail.com
Cc: walken@google.com
Cc: willy@infradead.org
Link: http://lkml.kernel.org/r/1502089981-21272-7-git-send-email-byungchul.park@lge.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Lockdep is a runtime locking correctness validator that detects and
reports a deadlock or its possibility by checking dependencies between
locks. It's useful since it does not report just an actual deadlock but
also the possibility of a deadlock that has not actually happened yet.
That enables problems to be fixed before they affect real systems.
However, this facility is only applicable to typical locks, such as
spinlocks and mutexes, which are normally released within the context in
which they were acquired. However, synchronization primitives like page
locks or completions, which are allowed to be released in any context,
also create dependencies and can cause a deadlock.
So lockdep should track these locks to do a better job. The 'crossrelease'
implementation makes these primitives also be tracked.
Signed-off-by: Byungchul Park <byungchul.park@lge.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: akpm@linux-foundation.org
Cc: boqun.feng@gmail.com
Cc: kernel-team@lge.com
Cc: kirill@shutemov.name
Cc: npiggin@gmail.com
Cc: walken@google.com
Cc: willy@infradead.org
Link: http://lkml.kernel.org/r/1502089981-21272-6-git-send-email-byungchul.park@lge.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently, a space for stack_trace is pinned in check_prev_add(), that
makes us not able to use external stack_trace. The simplest way to
achieve it is to pass an external stack_trace as an argument.
A more suitable solution is to pass a callback additionally along with
a stack_trace so that callers can decide the way to save or whether to
save. Actually crossrelease needs to do other than saving a stack_trace.
So pass a stack_trace and callback to handle it, to check_prev_add().
Signed-off-by: Byungchul Park <byungchul.park@lge.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: akpm@linux-foundation.org
Cc: boqun.feng@gmail.com
Cc: kernel-team@lge.com
Cc: kirill@shutemov.name
Cc: npiggin@gmail.com
Cc: walken@google.com
Cc: willy@infradead.org
Link: http://lkml.kernel.org/r/1502089981-21272-5-git-send-email-byungchul.park@lge.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Firstly, return 1 instead of 2 when 'prev -> next' dependency already
exists. Since the value 2 is not referenced anywhere, just return 1
indicating success in this case.
Secondly, return 2 instead of 1 when successfully added a lock_list
entry with saving stack_trace. With that, a caller can decide whether
to avoid redundant save_trace() on the caller site.
Signed-off-by: Byungchul Park <byungchul.park@lge.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: akpm@linux-foundation.org
Cc: boqun.feng@gmail.com
Cc: kernel-team@lge.com
Cc: kirill@shutemov.name
Cc: npiggin@gmail.com
Cc: walken@google.com
Cc: willy@infradead.org
Link: http://lkml.kernel.org/r/1502089981-21272-4-git-send-email-byungchul.park@lge.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Two boots + a make defconfig, the first didn't have the redundant bit
in, the second did:
lock-classes: 1168 1169 [max: 8191]
direct dependencies: 7688 5812 [max: 32768]
indirect dependencies: 25492 25937
all direct dependencies: 220113 217512
dependency chains: 9005 9008 [max: 65536]
dependency chain hlocks: 34450 34366 [max: 327680]
in-hardirq chains: 55 51
in-softirq chains: 371 378
in-process chains: 8579 8579
stack-trace entries: 108073 88474 [max: 524288]
combined max dependencies: 178738560 169094640
max locking depth: 15 15
max bfs queue depth: 320 329
cyclic checks: 9123 9190
redundant checks: 5046
redundant links: 1828
find-mask forwards checks: 2564 2599
find-mask backwards checks: 39521 39789
So it saves nearly 2k links and a fair chunk of stack-trace entries, but
as expected, makes no real difference on the indirect dependencies.
At the same time, you see the max BFS depth increase, which is also
expected, although it could easily be boot variance -- these numbers are
not entirely stable between boots.
The down side is that the cycles in the graph become larger and thus
the reports harder to read.
XXX: do we want this as a CONFIG variable, implied by LOCKDEP_SMALL?
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Byungchul Park <byungchul.park@lge.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Nikolay Borisov <nborisov@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: akpm@linux-foundation.org
Cc: boqun.feng@gmail.com
Cc: iamjoonsoo.kim@lge.com
Cc: kernel-team@lge.com
Cc: kirill@shutemov.name
Cc: npiggin@gmail.com
Cc: walken@google.com
Link: http://lkml.kernel.org/r/20170303091338.GH6536@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
A while ago someone, and I cannot find the email just now, asked if we
could not implement the RECLAIM_FS inversion stuff with a 'fake' lock
like we use for other things like workqueues etc. I think this should
be possible which allows reducing the 'irq' states and will reduce the
amount of __bfs() lookups we do.
Removing the 1 IRQ state results in 4 less __bfs() walks per
dependency, improving lockdep performance. And by moving this
annotation out of the lockdep code it becomes easier for the mm people
to extend.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Byungchul Park <byungchul.park@lge.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Nikolay Borisov <nborisov@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: akpm@linux-foundation.org
Cc: boqun.feng@gmail.com
Cc: iamjoonsoo.kim@lge.com
Cc: kernel-team@lge.com
Cc: kirill@shutemov.name
Cc: npiggin@gmail.com
Cc: walken@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Since its inception, our understanding of ACQUIRE, esp. as applied to
spinlocks, has changed somewhat. Also, I wonder if, with a simple
change, we cannot make it provide more.
The problem with the comment is that the STORE done by spin_lock isn't
itself ordered by the ACQUIRE, and therefore a later LOAD can pass over
it and cross with any prior STORE, rendering the default WMB
insufficient (pointed out by Alan).
Now, this is only really a problem on PowerPC and ARM64, both of
which already defined smp_mb__before_spinlock() as a smp_mb().
At the same time, we can get a much stronger construct if we place
that same barrier _inside_ the spin_lock(). In that case we upgrade
the RCpc spinlock to an RCsc. That would make all schedule() calls
fully transitive against one another.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
As using the normal static key API under the hotplug lock is
pretty much impossible, let's provide a variant of some of them
that require the hotplug lock to have already been taken.
These function are only meant to be used in CPU hotplug callbacks.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20170801080257.5056-4-marc.zyngier@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In order to later introduce an "already locked" version of some
of the static key funcions, let's split the code into the core stuff
(the *_cpuslocked functions) and the usual helpers, which now
take/release the hotplug lock and call into the _cpuslocked
versions.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20170801080257.5056-3-marc.zyngier@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
As we're about to rework the locking, let's move the taking and
release of the CPU hotplug lock to locations that will make its
reworking completely obvious.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20170801080257.5056-2-marc.zyngier@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In the unlikely case text modification does not fully order things,
add some extra ordering of our own to ensure we only enabled the fast
path after all text is visible.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Any use of key->enabled (that is static_key_enabled and static_key_count)
outside jump_label_lock should handle its own serialization. In the case
of cpusets_enabled_key, the key is always incremented/decremented under
cpuset_mutex, and hence the same rule applies to nr_cpusets. The rule
*is* respected currently, but the mutex is static so nr_cpusets should
be static too.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Zefan Li <lizefan@huawei.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1501601046-35683-4-git-send-email-pbonzini@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
static_key_enable/disable are trying to cap the static key count to
0/1. However, their use of key->enabled is outside jump_label_lock
so they do not really ensure that.
Rewrite them to do a quick check for an already enabled (respectively,
already disabled), and then recheck under the jump label lock. Unlike
static_key_slow_inc/dec, a failed check under the jump label lock does
not modify key->enabled.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1501601046-35683-2-git-send-email-pbonzini@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Rename __down_read() in __down_read_common() and teach it
to abort waiting in case of pending signals and killable
state argument passed.
Note, that we shouldn't wake anybody up in EINTR path, as:
We check for signal_pending_state() after (!waiter.task)
test and under spinlock. So, current task wasn't able to
be woken up. It may be in two cases: a writer is owner
of the sem, or a writer is a first waiter of the sem.
If a writer is owner of the sem, no one else may work
with it in parallel. It will wake somebody, when it
call up_write() or downgrade_write().
If a writer is the first waiter, it will be woken up,
when the last active reader releases the sem, and
sem->count became 0.
Also note, that set_current_state() may be moved down
to schedule() (after !waiter.task check), as all
assignments in this type of semaphore (including wake_up),
occur under spinlock, so we can't miss anything.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: arnd@arndb.de
Cc: avagin@virtuozzo.com
Cc: davem@davemloft.net
Cc: fenghua.yu@intel.com
Cc: gorcunov@virtuozzo.com
Cc: heiko.carstens@de.ibm.com
Cc: hpa@zytor.com
Cc: ink@jurassic.park.msu.ru
Cc: mattst88@gmail.com
Cc: rth@twiddle.net
Cc: schwidefsky@de.ibm.com
Cc: tony.luck@intel.com
Link: http://lkml.kernel.org/r/149789533283.9059.9829416940494747182.stgit@localhost.localdomain
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Fix ordering of link creation between node->prev and prev->next in
osq_lock(). A case in which the status of optimistic spin queue is
CPU6->CPU2 in which CPU6 has acquired the lock.
tail
v
,-. <- ,-.
|6| |2|
`-' -> `-'
At this point if CPU0 comes in to acquire osq_lock, it will update the
tail count.
CPU2 CPU0
----------------------------------
tail
v
,-. <- ,-. ,-.
|6| |2| |0|
`-' -> `-' `-'
After tail count update if CPU2 starts to unqueue itself from
optimistic spin queue, it will find an updated tail count with CPU0 and
update CPU2 node->next to NULL in osq_wait_next().
unqueue-A
tail
v
,-. <- ,-. ,-.
|6| |2| |0|
`-' `-' `-'
unqueue-B
->tail != curr && !node->next
If reordering of following stores happen then prev->next where prev
being CPU2 would be updated to point to CPU0 node:
tail
v
,-. <- ,-. ,-.
|6| |2| |0|
`-' `-' -> `-'
osq_wait_next()
node->next <- 0
xchg(node->next, NULL)
tail
v
,-. <- ,-. ,-.
|6| |2| |0|
`-' `-' `-'
unqueue-C
At this point if next instruction
WRITE_ONCE(next->prev, prev);
in CPU2 path is committed before the update of CPU0 node->prev = prev then
CPU0 node->prev will point to CPU6 node.
tail
v----------. v
,-. <- ,-. ,-.
|6| |2| |0|
`-' `-' `-'
`----------^
At this point if CPU0 path's node->prev = prev is committed resulting
in change of CPU0 prev back to CPU2 node. CPU2 node->next is NULL
currently,
tail
v
,-. <- ,-. <- ,-.
|6| |2| |0|
`-' `-' `-'
`----------^
so if CPU0 gets into unqueue path of osq_lock it will keep spinning
in infinite loop as condition prev->next == node will never be true.
Signed-off-by: Prateek Sood <prsood@codeaurora.org>
[ Added pictures, rewrote comments. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: sramana@codeaurora.org
Link: http://lkml.kernel.org/r/1500040076-27626-1-git-send-email-prsood@codeaurora.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Steven Rostedt reported a potential race in RCU core because of
swake_up():
CPU0 CPU1
---- ----
__call_rcu_core() {
spin_lock(rnp_root)
need_wake = __rcu_start_gp() {
rcu_start_gp_advanced() {
gp_flags = FLAG_INIT
}
}
rcu_gp_kthread() {
swait_event_interruptible(wq,
gp_flags & FLAG_INIT) {
spin_lock(q->lock)
*fetch wq->task_list here! *
list_add(wq->task_list, q->task_list)
spin_unlock(q->lock);
*fetch old value of gp_flags here *
spin_unlock(rnp_root)
rcu_gp_kthread_wake() {
swake_up(wq) {
swait_active(wq) {
list_empty(wq->task_list)
} * return false *
if (condition) * false *
schedule();
In this case, a wakeup is missed, which could cause the rcu_gp_kthread
waits for a long time.
The reason of this is that we do a lockless swait_active() check in
swake_up(). To fix this, we can either 1) add a smp_mb() in swake_up()
before swait_active() to provide the proper order or 2) simply remove
the swait_active() in swake_up().
The solution 2 not only fixes this problem but also keeps the swait and
wait API as close as possible, as wake_up() doesn't provide a full
barrier and doesn't do a lockless check of the wait queue either.
Moreover, there are users already using swait_active() to do their quick
checks for the wait queues, so it make less sense that swake_up() and
swake_up_all() do this on their own.
This patch then removes the lockless swait_active() check in swake_up()
and swake_up_all().
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Krister Johansen <kjlx@templeofstupid.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170615041828.zk3a3sfyudm5p6nl@tardis
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Now that we have more than one place to get the task state,
intruduce the task_state_to_char() helper function to save some code.
No functionality changed.
Signed-off-by: Xie XiuQi <xiexiuqi@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <cj.chengjian@huawei.com>
Cc: <huawei.libin@huawei.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1502095463-160172-3-git-send-email-xiexiuqi@huawei.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently we print the runnable task in /proc/sched_debug, but
there is no task state information.
We don't know which task is in the runqueue and which task is sleeping.
Add task state in the runnable task list, like this:
runnable tasks:
S task PID tree-key switches prio wait-time sum-exec sum-sleep
-----------------------------------------------------------------------------------------------------------
S watchdog/239 1452 -11.917445 2811 0 0.000000 8.949306 0.000000 7 0 /
S migration/239 1453 20686.367740 8 0 0.000000 16215.720897 0.000000 7 0 /
S ksoftirqd/239 1454 115383.841071 12 120 0.000000 0.200683 0.000000 7 0 /
>R test 21287 4872.190970 407 120 0.000000 4874.911790 0.000000 7 0 /autogroup-150
R test 21288 4868.385454 401 120 0.000000 3672.341489 0.000000 7 0 /autogroup-150
R test 21289 4868.326776 384 120 0.000000 3424.934159 0.000000 7 0 /autogroup-150
Signed-off-by: Xie XiuQi <xiexiuqi@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <cj.chengjian@huawei.com>
Cc: <huawei.libin@huawei.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1502095463-160172-2-git-send-email-xiexiuqi@huawei.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
It appears as though the addition of the PID namespace did not update
the output code for /proc/*/sched, which resulted in it providing PIDs
that were not self-consistent with the /proc mount. This additionally
made it trivial to detect whether a process was inside &init_pid_ns from
userspace, making container detection trivial:
https://github.com/jessfraz/amicontained
This leads to situations such as:
% unshare -pmf
% mount -t proc proc /proc
% head -n1 /proc/1/sched
head (10047, #threads: 1)
Fix this by just using task_pid_nr_ns for the output of /proc/*/sched.
All of the other uses of task_pid_nr in kernel/sched/debug.c are from a
sysctl context and thus don't need to be namespaced.
Signed-off-by: Aleksa Sarai <asarai@suse.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Jess Frazelle <acidburn@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: cyphar@cyphar.com
Link: http://lkml.kernel.org/r/20170806044141.5093-1-asarai@suse.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
init_idle_bootup_task( ) is called in rest_init( ) to switch
the scheduling class of the boot thread to the idle class.
the function only sets:
idle->sched_class = &idle_sched_class;
which has been set in init_idle() called by sched_init():
/*
* The idle tasks have their own, simple scheduling class:
*/
idle->sched_class = &idle_sched_class;
We've already set the boot thread to idle class in
start_kernel()->sched_init()->init_idle()
so it's unnecessary to set it again in
start_kernel()->rest_init()->init_idle_bootup_task()
Signed-off-by: Cheng Jian <cj.chengjian@huawei.com>
Signed-off-by: Xie XiuQi <xiexiuqi@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <akpm@linux-foundation.org>
Cc: <huawei.libin@huawei.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1501838377-109720-1-git-send-email-cj.chengjian@huawei.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
cpudl_find() users are only interested in knowing if suitable CPU(s)
were found or not (and then they look at later_mask to know which).
Change cpudl_find() return type accordingly. Aligns with rt code.
Signed-off-by: Byungchul Park <byungchul.park@lge.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <bristot@redhat.com>
Cc: <juri.lelli@gmail.com>
Cc: <kernel-team@lge.com>
Cc: <rostedt@goodmis.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1495504859-10960-3-git-send-email-byungchul.park@lge.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When cpudl_find() returns any among free_cpus, the CPU might not be
closer than others, considering sched domain. For example:
this_cpu: 15
free_cpus: 0, 1,..., 14 (== later_mask)
best_cpu: 0
topology:
0 --+
+--+
1 --+ |
+-- ... --+
2 --+ | |
+--+ |
3 --+ |
... ...
12 --+ |
+--+ |
13 --+ | |
+-- ... -+
14 --+ |
+--+
15 --+
In this case, it would be best to select 14 since it's a free CPU and
closest to 15 (this_cpu). However, currently the code selects 0 (best_cpu)
even though that's just any among free_cpus. Fix it.
This (re)aligns the deadline behaviour with the rt behaviour.
Signed-off-by: Byungchul Park <byungchul.park@lge.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <bristot@redhat.com>
Cc: <juri.lelli@gmail.com>
Cc: <kernel-team@lge.com>
Cc: <rostedt@goodmis.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1495504859-10960-2-git-send-email-byungchul.park@lge.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Running 80 tasks in the same group, or as threads of the same process,
results in the memory getting scanned 80x as fast as it would be if a
single task was using the memory.
This really hurts some workloads.
Scale the scan period by the number of tasks in the numa group, and
the shared / private ratio, so the average rate at which memory in
the group is scanned corresponds roughly to the rate at which a single
task would scan its memory.
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: jhladky@redhat.com
Cc: lvenanci@redhat.com
Link: http://lkml.kernel.org/r/20170731192847.23050-3-riel@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The comment above update_task_scan_period() says the scan period should
be increased (scanning slows down) if the majority of memory accesses
are on the local node, or if the majority of the page accesses are
shared with other tasks.
However, with the current code, all a high ratio of shared accesses
does is slow down the rate at which scanning is made faster.
This patch changes things so either lots of shared accesses or
lots of local accesses will slow down scanning, and numa scanning
is sped up only when there are lots of private faults on remote
memory pages.
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: jhladky@redhat.com
Cc: lvenanci@redhat.com
Link: http://lkml.kernel.org/r/20170731192847.23050-2-riel@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The running state is a subset of runnable state which means that running
can't be set if runnable (weight) is cleared. There are corner cases
where the current sched_entity has been already dequeued but cfs_rq->curr
has not been updated yet and still points to the dequeued sched_entity.
If ___update_load_avg() is called at that time, weight will be 0 and running
will be set which is not possible.
This case happens during pick_next_task_fair() when a cfs_rq becomes idles.
The current sched_entity has been dequeued so se->on_rq is cleared and
cfs_rq->weight is null. But cfs_rq->curr still points to se (it will be
cleared when picking the idle thread). Because the cfs_rq becomes idle,
idle_balance() is called and ends up to call update_blocked_averages()
with these wrong running and runnable states.
Add a test in ___update_load_avg() to correct the running state in this case.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten.Rasmussen@arm.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dietmar.eggemann@arm.com
Link: http://lkml.kernel.org/r/1498885573-18984-1-git-send-email-vincent.guittot@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
pick_next_task_dl() and build_sched_domain() aren't used outside
deadline.c and topology.c.
Make them static.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: linaro-kernel@lists.linaro.org
Link: http://lkml.kernel.org/r/36e4cbb6210002cadae89920ae97e19e7e513008.1493281605.git.viresh.kumar@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The 'struct cpupri' passed to cpupri_init() is already initialized to
zero. Don't do that again.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: linaro-kernel@lists.linaro.org
Link: http://lkml.kernel.org/r/8a71d48c5a077500b6ddc1a41484c0ac8d3aad94.1492065513.git.viresh.kumar@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The 'struct cpudl' passed to cpudl_init() is already initialized to zero.
Don't do that again.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: linaro-kernel@lists.linaro.org
Link: http://lkml.kernel.org/r/bd4c229806bc96694b15546207afcc221387d2f5.1492065513.git.viresh.kumar@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There are only two callers of init_rootdomain(). One of them passes a
global to it and another one sends dynamically allocated root-domain.
There is no need to memset the root-domain in the first case as the
structure is already reset.
Update alloc_rootdomain() to allocate the memory with kzalloc() and
remove the memset() call from init_rootdomain().
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: linaro-kernel@lists.linaro.org
Link: http://lkml.kernel.org/r/fc2f6cc90b098040970c85a97046512572d765bc.1492065513.git.viresh.kumar@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
update_freq is always true and there is no need to pass it to
update_cfs_rq_load_avg(). Remove it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: linaro-kernel@lists.linaro.org
Link: http://lkml.kernel.org/r/2d28d295f3f591ede7e931462bce1bda5aaa4896.1495603536.git.viresh.kumar@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Rearrange pick_next_task_fair() a bit to avoid checking
cfs_rq->nr_running twice for the case where FAIR_GROUP_SCHED is enabled
and the previous task doesn't belong to the fair class.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: linaro-kernel@lists.linaro.org
Link: http://lkml.kernel.org/r/000903ab3df3350943d3271c53615893a230dc95.1495603536.git.viresh.kumar@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
weighted_cpuload() uses the cpu number passed to it get pointer to the
runqueue. Almost all callers of weighted_cpuload() already have the rq
pointer with them and can send that directly to weighted_cpuload(). In
some cases the callers actually get the CPU number by doing cpu_of(rq).
It would be simpler to pass rq to weighted_cpuload().
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: linaro-kernel@lists.linaro.org
Link: http://lkml.kernel.org/r/b7720627e0576dc29b4ba3f9b6edbc913bb4f684.1495603536.git.viresh.kumar@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
For SMP systems, update_load_avg() calls the cpufreq update util
handlers only for the top level cfs_rq (i.e. rq->cfs).
But that is not the case for UP systems. update_load_avg() calls util
handler for any cfs_rq for which it is called. This would result in way
too many calls from the scheduler to the cpufreq governors when
CONFIG_FAIR_GROUP_SCHED is enabled.
Reduce the frequency of these calls by copying the behavior from the SMP
case, i.e. Only call util handlers for the top level cfs_rq.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: linaro-kernel@lists.linaro.org
Fixes: 536bd00cdb ("sched/fair: Fix !CONFIG_SMP kernel cpufreq governor breakage")
Link: http://lkml.kernel.org/r/6abf69a2107525885b616a2c1ec03d9c0946171c.1495603536.git.viresh.kumar@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Vince reported that when we do IOC_ENABLE/IOC_DISABLE while the task
is SIGSTOP'ed state the timestamps go wobbly.
It turns out we indeed fail to correctly account time while in 'OFF'
state and doing IOC_ENABLE without getting scheduled in exposes the
problem.
Further thinking about this problem, it occurred to me that we can
suffer a similar fate when we migrate an uncore event between CPUs.
The perf_event_install() on the 'new' CPU will do add_event_to_ctx()
which will reset all the time stamp, resulting in a subsequent
update_event_times() to overwrite the total_time_* fields with smaller
values.
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Vince reported the following rdpmc() testcase failure:
> Failing test case:
>
> fd=perf_event_open();
> addr=mmap(fd);
> exec() // without closing or unmapping the event
> fd=perf_event_open();
> addr=mmap(fd);
> rdpmc() // GPFs due to rdpmc being disabled
The problem is of course that exec() plays tricks with what is
current->mm, only destroying the old mappings after having
installed the new mm.
Fix this confusion by passing along vma->vm_mm instead of relying on
current->mm.
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Tested-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Fixes: 1e0fb9ec67 ("perf: Add pmu callbacks to track event mapping and unmapping")
Link: http://lkml.kernel.org/r/20170802173930.cstykcqefmqt7jau@hirez.programming.kicks-ass.net
[ Minor cleanups. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Enable the newly added jump opcodes, main parts are in two
different areas, namely direct packet access and dynamic map
value access. For the direct packet access, we now allow for
the following two new patterns to match in order to trigger
markings with find_good_pkt_pointers():
Variant 1 (access ok when taking the branch):
0: (61) r2 = *(u32 *)(r1 +76)
1: (61) r3 = *(u32 *)(r1 +80)
2: (bf) r0 = r2
3: (07) r0 += 8
4: (ad) if r0 < r3 goto pc+2
R0=pkt(id=0,off=8,r=0) R1=ctx R2=pkt(id=0,off=0,r=0)
R3=pkt_end R10=fp
5: (b7) r0 = 0
6: (95) exit
from 4 to 7: R0=pkt(id=0,off=8,r=8) R1=ctx
R2=pkt(id=0,off=0,r=8) R3=pkt_end R10=fp
7: (71) r0 = *(u8 *)(r2 +0)
8: (05) goto pc-4
5: (b7) r0 = 0
6: (95) exit
processed 11 insns, stack depth 0
Variant 2 (access ok on fall-through):
0: (61) r2 = *(u32 *)(r1 +76)
1: (61) r3 = *(u32 *)(r1 +80)
2: (bf) r0 = r2
3: (07) r0 += 8
4: (bd) if r3 <= r0 goto pc+1
R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8)
R3=pkt_end R10=fp
5: (71) r0 = *(u8 *)(r2 +0)
6: (b7) r0 = 1
7: (95) exit
from 4 to 6: R0=pkt(id=0,off=8,r=0) R1=ctx
R2=pkt(id=0,off=0,r=0) R3=pkt_end R10=fp
6: (b7) r0 = 1
7: (95) exit
processed 10 insns, stack depth 0
The above two basically just swap the branches where we need
to handle an exception and allow packet access compared to the
two already existing variants for find_good_pkt_pointers().
For the dynamic map value access, we add the new instructions
to reg_set_min_max() and reg_set_min_max_inv() in order to
learn bounds. Verifier test cases for both are added in a
follow-up patch.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, eBPF only understands BPF_JGT (>), BPF_JGE (>=),
BPF_JSGT (s>), BPF_JSGE (s>=) instructions, this means that
particularly *JLT/*JLE counterparts involving immediates need
to be rewritten from e.g. X < [IMM] by swapping arguments into
[IMM] > X, meaning the immediate first is required to be loaded
into a register Y := [IMM], such that then we can compare with
Y > X. Note that the destination operand is always required to
be a register.
This has the downside of having unnecessarily increased register
pressure, meaning complex program would need to spill other
registers temporarily to stack in order to obtain an unused
register for the [IMM]. Loading to registers will thus also
affect state pruning since we need to account for that register
use and potentially those registers that had to be spilled/filled
again. As a consequence slightly more stack space might have
been used due to spilling, and BPF programs are a bit longer
due to extra code involving the register load and potentially
required spill/fills.
Thus, add BPF_JLT (<), BPF_JLE (<=), BPF_JSLT (s<), BPF_JSLE (s<=)
counterparts to the eBPF instruction set. Modifying LLVM to
remove the NegateCC() workaround in a PoC patch at [1] and
allowing it to also emit the new instructions resulted in
cilium's BPF programs that are injected into the fast-path to
have a reduced program length in the range of 2-3% (e.g.
accumulated main and tail call sections from one of the object
file reduced from 4864 to 4729 insns), reduced complexity in
the range of 10-30% (e.g. accumulated sections reduced in one
of the cases from 116432 to 88428 insns), and reduced stack
usage in the range of 1-5% (e.g. accumulated sections from one
of the object files reduced from 824 to 784b).
The modification for LLVM will be incorporated in a backwards
compatible way. Plan is for LLVM to have i) a target specific
option to offer a possibility to explicitly enable the extension
by the user (as we have with -m target specific extensions today
for various CPU insns), and ii) have the kernel checked for
presence of the extensions and enable them transparently when
the user is selecting more aggressive options such as -march=native
in a bpf target context. (Other frontends generating BPF byte
code, e.g. ply can probe the kernel directly for its code
generation.)
[1] https://github.com/borkmann/llvm/tree/bpf-insns
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The UDP offload conflict is dealt with by simply taking what is
in net-next where we have removed all of the UFO handling code
entirely.
The TCP conflict was a case of local variables in a function
being removed from both net and net-next.
In netvsc we had an assignment right next to where a missing
set of u64 stats sync object inits were added.
Signed-off-by: David S. Miller <davem@davemloft.net>
CPUFREQ_ENTRY_INVALID is a special symbol which is used to specify that
an entry in the cpufreq table is invalid. But using it outside of the
scope of the cpufreq table looks a bit incorrect.
We can represent an invalid frequency by writing it as 0 instead if we
need. Note that it is already done that way for the return value of the
->get() callback.
Lets do the same for ->fast_switch() and not use CPUFREQ_ENTRY_INVALID
outside of the scope of cpufreq table.
Also update the comment over cpufreq_driver_fast_switch() to clearly
mention what this returns.
None of the drivers return CPUFREQ_ENTRY_INVALID as of now from
->fast_switch() callback and so we don't need to update any of those.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 65d8fc777f ("futex: Remove requirement for lock_page() in
get_futex_key()") removed an unnecessary lock_page() with the
side-effect that page->mapping needed to be treated very carefully.
Two defensive warnings were added in case any assumption was missed and
the first warning assumed a correct application would not alter a
mapping backing a futex key. Since merging, it has not triggered for
any unexpected case but Mark Rutland reported the following bug
triggering due to the first warning.
kernel BUG at kernel/futex.c:679!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 3695 Comm: syz-executor1 Not tainted 4.13.0-rc3-00020-g307fec773ba3 #3
Hardware name: linux,dummy-virt (DT)
task: ffff80001e271780 task.stack: ffff000010908000
PC is at get_futex_key+0x6a4/0xcf0 kernel/futex.c:679
LR is at get_futex_key+0x6a4/0xcf0 kernel/futex.c:679
pc : [<ffff00000821ac14>] lr : [<ffff00000821ac14>] pstate: 80000145
The fact that it's a bug instead of a warning was due to an unrelated
arm64 problem, but the warning itself triggered because the underlying
mapping changed.
This is an application issue but from a kernel perspective it's a
recoverable situation and the warning is unnecessary so this patch
removes the warning. The warning may potentially be triggered with the
following test program from Mark although it may be necessary to adjust
NR_FUTEX_THREADS to be a value smaller than the number of CPUs in the
system.
#include <linux/futex.h>
#include <pthread.h>
#include <stdio.h>
#include <stdlib.h>
#include <sys/mman.h>
#include <sys/syscall.h>
#include <sys/time.h>
#include <unistd.h>
#define NR_FUTEX_THREADS 16
pthread_t threads[NR_FUTEX_THREADS];
void *mem;
#define MEM_PROT (PROT_READ | PROT_WRITE)
#define MEM_SIZE 65536
static int futex_wrapper(int *uaddr, int op, int val,
const struct timespec *timeout,
int *uaddr2, int val3)
{
syscall(SYS_futex, uaddr, op, val, timeout, uaddr2, val3);
}
void *poll_futex(void *unused)
{
for (;;) {
futex_wrapper(mem, FUTEX_CMP_REQUEUE_PI, 1, NULL, mem + 4, 1);
}
}
int main(int argc, char *argv[])
{
int i;
mem = mmap(NULL, MEM_SIZE, MEM_PROT,
MAP_SHARED | MAP_ANONYMOUS, -1, 0);
printf("Mapping @ %p\n", mem);
printf("Creating futex threads...\n");
for (i = 0; i < NR_FUTEX_THREADS; i++)
pthread_create(&threads[i], NULL, poll_futex, NULL);
printf("Flipping mapping...\n");
for (;;) {
mmap(mem, MEM_SIZE, MEM_PROT,
MAP_FIXED | MAP_SHARED | MAP_ANONYMOUS, -1, 0);
}
return 0;
}
Reported-and-tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org # 4.7+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The function check_uarg_tail_zero() was created from bpf(2) for
BPF_OBJ_GET_INFO_BY_FD without taking the access_ok() nor the PAGE_SIZE
checks. Make this checks more generally available while unlikely to be
triggered, extend the memory range check and add an explanation
including why the ToCToU should not be a security concern.
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Link: https://lkml.kernel.org/r/CAGXu5j+vRGFvJZmjtAcT8Hi8B+Wz0e1b6VKYZHfQP_=DXzC4CQ@mail.gmail.com
Signed-off-by: David S. Miller <davem@davemloft.net>
The function check_uarg_tail_zero() may be useful for other part of the
code in the syscall.c file. Move this function at the beginning of the
file.
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The more detailed value tracking can reduce the effectiveness of pruning
for some programs. So, to avoid rejecting previously valid programs, up
the limit to 128kinsns. Hopefully we will be able to bring this back
down later by improving pruning performance.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allows us to, sometimes, combine information from a signed check of one
bound and an unsigned check of the other.
We now track the full range of possible values, rather than restricting
ourselves to [0, 1<<30) and considering anything beyond that as
unknown. While this is probably not necessary, it makes the code more
straightforward and symmetrical between signed and unsigned bounds.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Unifies adjusted and unadjusted register value types (e.g. FRAME_POINTER is
now just a PTR_TO_STACK with zero offset).
Tracks value alignment by means of tracking known & unknown bits. This
also replaces the 'reg->imm' (leading zero bits) calculations for (what
were) UNKNOWN_VALUEs.
If pointer leaks are allowed, and adjust_ptr_min_max_vals returns -EACCES,
treat the pointer as an unknown scalar and try again, because we might be
able to conclude something about the result (e.g. pointer & 0x40 is either
0 or 0x40).
Verifier hooks in the netronome/nfp driver were changed to match the new
data structures.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Originally we used a mutex to protect concurrent devmap update
and delete operations from racing with netdev unregister notifier
callbacks.
The notifier hook is needed because we increment the netdev ref
count when a dev is added to the devmap. This ensures the netdev
reference is valid in the datapath. However, we don't want to block
unregister events, hence the initial mutex and notifier handler.
The concern was in the notifier hook we search the map for dev
entries that hold a refcnt on the net device being torn down. But,
in order to do this we require two steps,
(i) dereference the netdev: dev = rcu_dereference(map[i])
(ii) test ifindex: dev->ifindex == removing_ifindex
and then finally we can swap in the NULL dev in the map via an
xchg operation,
xchg(map[i], NULL)
The danger here is a concurrent update could run a different
xchg op concurrently leading us to replace the new dev with a
NULL dev incorrectly.
CPU 1 CPU 2
notifier hook bpf devmap update
dev = rcu_dereference(map[i])
dev = rcu_dereference(map[i])
xchg(map[i]), new_dev);
rcu_call(dev,...)
xchg(map[i], NULL)
The above flow would create the incorrect state with the dev
reference in the update path being lost. To resolve this the
original code used a mutex around the above block. However,
updates, deletes, and lookups occur inside rcu critical sections
so we can't use a mutex in this context safely.
Fortunately, by writing slightly better code we can avoid the
mutex altogether. If CPU 1 in the above example uses a cmpxchg
and _only_ replaces the dev reference in the map when it is in
fact the expected dev the race is removed completely. The two
cases being illustrated here, first the race condition,
CPU 1 CPU 2
notifier hook bpf devmap update
dev = rcu_dereference(map[i])
dev = rcu_dereference(map[i])
xchg(map[i]), new_dev);
rcu_call(dev,...)
odev = cmpxchg(map[i], dev, NULL)
Now we can test the cmpxchg return value, detect odev != dev and
abort. Or in the good case,
CPU 1 CPU 2
notifier hook bpf devmap update
dev = rcu_dereference(map[i])
odev = cmpxchg(map[i], dev, NULL)
[...]
Now 'odev == dev' and we can do proper cleanup.
And viola the original race we tried to solve with a mutex is
corrected and the trace noted by Sasha below is resolved due
to removal of the mutex.
Note: When walking the devmap and removing dev references as needed
we depend on the core to fail any calls to dev_get_by_index() using
the ifindex of the device being removed. This way we do not race with
the user while searching the devmap.
Additionally, the mutex was also protecting list add/del/read on
the list of maps in-use. This patch converts this to an RCU list
and spinlock implementation. This protects the list from concurrent
alloc/free operations. The notifier hook walks this list so it uses
RCU read semantics.
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:747
in_atomic(): 1, irqs_disabled(): 0, pid: 16315, name: syz-executor1
1 lock held by syz-executor1/16315:
#0: (rcu_read_lock){......}, at: [<ffffffff8c363bc2>] map_delete_elem kernel/bpf/syscall.c:577 [inline]
#0: (rcu_read_lock){......}, at: [<ffffffff8c363bc2>] SYSC_bpf kernel/bpf/syscall.c:1427 [inline]
#0: (rcu_read_lock){......}, at: [<ffffffff8c363bc2>] SyS_bpf+0x1d32/0x4ba0 kernel/bpf/syscall.c:1388
Fixes: 2ddf71e23c ("net: add notifier hooks for devmap bpf map")
Reported-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, bpf programs cannot be attached to sys_enter_* and sys_exit_*
style tracepoints. The iovisor/bcc issue #748
(https://github.com/iovisor/bcc/issues/748) documents this issue.
For example, if you try to attach a bpf program to tracepoints
syscalls/sys_enter_newfstat, you will get the following error:
# ./tools/trace.py t:syscalls:sys_enter_newfstat
Ioctl(PERF_EVENT_IOC_SET_BPF): Invalid argument
Failed to attach BPF to tracepoint
The main reason is that syscalls/sys_enter_* and syscalls/sys_exit_*
tracepoints are treated differently from other tracepoints and there
is no bpf hook to it.
This patch adds bpf support for these syscalls tracepoints by
. permitting bpf attachment in ioctl PERF_EVENT_IOC_SET_BPF
. calling bpf programs in perf_syscall_enter and perf_syscall_exit
The legality of bpf program ctx access is also checked.
Function trace_event_get_offsets returns correct max offset for each
specific syscall tracepoint, which is compared against the maximum offset
access in bpf program.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This series includes some mlx5 updates for both net-next and rdma trees.
From Saeed,
Core driver updates to allow selectively building the driver with
or without some large driver components, such as
- E-Switch (Ethernet SRIOV support).
- Multi-Physical Function Switch (MPFs) support.
For that we split E-Switch and MPFs functionalities into separate files.
From Erez,
Delay mlx5_core events when mlx5 interfaces, namely mlx5_ib, registration
is taking place and until it completes.
From Rabie,
Increase the maximum supported flow counters.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJZiDoAAAoJEEg/ir3gV/o+594H/RH5kRwC719s/5YQFJXvGsVC
fjtj3UUJPLrWB8XBh7a4PRcxXPIHaFKJuY3MU7KHFIeZQFklJcit3njjpxDlUINo
F5S1LHBSYBkeMD/ksWBA8OLCBprNGN6WQ2tuFfAjZlQQ44zqv8LJmegoDtW9bGRy
aGAkjUmALEblQsq81y0BQwN2/8DA8HAywrs8L2dkH1LHwijoIeYMZFOtKugv1FbB
ABSKxcU7D/NYw6rsVdZG59fHFQ+eKOspDFqBZrUzfQ+zUU2hFFo96ovfXBfIqYCV
7BtJuKXu2LeGPzFLsuw4h1131iqFT1iSMy9fEhf/4OwaL/KPP/+Umy8vP/XfM+U=
=wCpd
-----END PGP SIGNATURE-----
Merge tag 'mlx5-shared-2017-08-07' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Saeed Mahameed says:
====================
mlx5-shared-2017-08-07
This series includes some mlx5 updates for both net-next and rdma trees.
From Saeed,
Core driver updates to allow selectively building the driver with
or without some large driver components, such as
- E-Switch (Ethernet SRIOV support).
- Multi-Physical Function Switch (MPFs) support.
For that we split E-Switch and MPFs functionalities into separate files.
From Erez,
Delay mlx5_core events when mlx5 interfaces, namely mlx5_ib, registration
is taking place and until it completes.
From Rabie,
Increase the maximum supported flow counters.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The latest change of compat_sys_sigpending in commit 8f13621abc
("sigpending(): move compat to native") has broken it in two ways.
First, it tries to write 4 bytes more than userspace expects:
sizeof(old_sigset_t) == sizeof(long) == 8 instead of
sizeof(compat_old_sigset_t) == sizeof(u32) == 4.
Second, on big endian architectures these bytes are being written in the
wrong order.
This bug was found by strace test suite.
Reported-by: Anatoly Pugachev <matorola@gmail.com>
Inspired-by: Eugene Syromyatnikov <evgsyr@gmail.com>
Fixes: 8f13621abc ("sigpending(): move compat to native")
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Modify the ACPI system sleep support setup code to select
suspend-to-idle as the default system sleep state if
(1) the ACPI_FADT_LOW_POWER_S0 flag is set in the FADT and
(2) the Low Power Idle S0 _DSM interface has been discovered and
(3) the default sleep state was not selected from the kernel command
line.
The main motivation for this change is that systems where the (1) and
(2) conditions are met typically ship with OSes that don't exercise
the S3 path in the platform firmware which remains untested and turns
out to be non-functional at least in some cases.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mario Limonciello <mario.limonciello@dell.com>
Pull timer fix from Thomas Gleixner:
"A single fix for a multiplication overflow in the timer code on 32bit
systems"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timers: Fix overflow in get_next_timer_interrupt
In codepaths that use the begin/retry interface for reading
mems_allowed_seq with irqs disabled, there exists a race condition that
stalls the patch process after only modifying a subset of the
static_branch call sites.
This problem manifested itself as a deadlock in the slub allocator,
inside get_any_partial. The loop reads mems_allowed_seq value (via
read_mems_allowed_begin), performs the defrag operation, and then
verifies the consistency of mem_allowed via the read_mems_allowed_retry
and the cookie returned by xxx_begin.
The issue here is that both begin and retry first check if cpusets are
enabled via cpusets_enabled() static branch. This branch can be
rewritted dynamically (via cpuset_inc) if a new cpuset is created. The
x86 jump label code fully synchronizes across all CPUs for every entry
it rewrites. If it rewrites only one of the callsites (specifically the
one in read_mems_allowed_retry) and then waits for the
smp_call_function(do_sync_core) to complete while a CPU is inside the
begin/retry section with IRQs off and the mems_allowed value is changed,
we can hang.
This is because begin() will always return 0 (since it wasn't patched
yet) while retry() will test the 0 against the actual value of the seq
counter.
The fix is to use two different static keys: one for begin
(pre_enable_key) and one for retry (enable_key). In cpuset_inc(), we
first bump the pre_enable key to ensure that cpuset_mems_allowed_begin()
always return a valid seqcount if are enabling cpusets. Similarly, when
disabling cpusets via cpuset_dec(), we first ensure that callers of
cpuset_mems_allowed_retry() will start ignoring the seqcount value
before we let cpuset_mems_allowed_begin() return 0.
The relevant stack traces of the two stuck threads:
CPU: 1 PID: 1415 Comm: mkdir Tainted: G L 4.9.36-00104-g540c51286237 #4
Hardware name: Default string Default string/Hardware, BIOS 4.29.1-20170526215256 05/26/2017
task: ffff8817f9c28000 task.stack: ffffc9000ffa4000
RIP: smp_call_function_many+0x1f9/0x260
Call Trace:
smp_call_function+0x3b/0x70
on_each_cpu+0x2f/0x90
text_poke_bp+0x87/0xd0
arch_jump_label_transform+0x93/0x100
__jump_label_update+0x77/0x90
jump_label_update+0xaa/0xc0
static_key_slow_inc+0x9e/0xb0
cpuset_css_online+0x70/0x2e0
online_css+0x2c/0xa0
cgroup_apply_control_enable+0x27f/0x3d0
cgroup_mkdir+0x2b7/0x420
kernfs_iop_mkdir+0x5a/0x80
vfs_mkdir+0xf6/0x1a0
SyS_mkdir+0xb7/0xe0
entry_SYSCALL_64_fastpath+0x18/0xad
...
CPU: 2 PID: 1 Comm: init Tainted: G L 4.9.36-00104-g540c51286237 #4
Hardware name: Default string Default string/Hardware, BIOS 4.29.1-20170526215256 05/26/2017
task: ffff8818087c0000 task.stack: ffffc90000030000
RIP: int3+0x39/0x70
Call Trace:
<#DB> ? ___slab_alloc+0x28b/0x5a0
<EOE> ? copy_process.part.40+0xf7/0x1de0
__slab_alloc.isra.80+0x54/0x90
copy_process.part.40+0xf7/0x1de0
copy_process.part.40+0xf7/0x1de0
kmem_cache_alloc_node+0x8a/0x280
copy_process.part.40+0xf7/0x1de0
_do_fork+0xe7/0x6c0
_raw_spin_unlock_irq+0x2d/0x60
trace_hardirqs_on_caller+0x136/0x1d0
entry_SYSCALL_64_fastpath+0x5/0xad
do_syscall_64+0x27/0x350
SyS_clone+0x19/0x20
do_syscall_64+0x60/0x350
entry_SYSCALL64_slow_path+0x25/0x25
Link: http://lkml.kernel.org/r/20170731040113.14197-1-dmitriyz@waymo.com
Fixes: 46e700abc4 ("mm, page_alloc: remove unnecessary taking of a seqlock when cpusets are disabled")
Signed-off-by: Dima Zavin <dmitriyz@waymo.com>
Reported-by: Cliff Spradlin <cspradlin@waymo.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christopher Lameter <cl@linux.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After commit 3d375d7859 ("mm: update callers to use HASH_ZERO flag"),
drop unused pidhash_size in pidhash_init().
Link: http://lkml.kernel.org/r/1500389267-49222-1-git-send-email-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Pavel Tatashin <Pasha.Tatashin@Oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Each css_set directly points to the default cgroup it belongs to, so
there's no reason to walk the cgrp_links list on the default
hierarchy.
Signed-off-by: Tejun Heo <tj@kernel.org>
As we already have a pointer to the parent cgroup in
cgroup_destroy_locked(), we don't need to calculate it again
to pass as an argument for cgroup1_check_for_release().
Signed-off-by: Roman Gushchin <guro@fb.com>
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: Waiman Long <longman@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: kernel-team@fb.com
Cc: linux-kernel@vger.kernel.org
A cgroup can consume resources even after being deleted by a user.
For example, writing back dirty pages should be accounted and
limited, despite the corresponding cgroup might contain no processes
and being deleted by a user.
In the current implementation a cgroup can remain in such "dying" state
for an undefined amount of time. For instance, if a memory cgroup
contains a pge, mlocked by a process belonging to an other cgroup.
Although the lifecycle of a dying cgroup is out of user's control,
it's important to have some insight of what's going on under the hood.
In particular, it's handy to have a counter which will allow
to detect css leaks.
To solve this problem, add a cgroup.stat interface to
the base cgroup control files with the following metrics:
nr_descendants total number of visible descendant cgroups
nr_dying_descendants total number of dying descendant cgroups
Signed-off-by: Roman Gushchin <guro@fb.com>
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: Waiman Long <longman@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: kernel-team@fb.com
Cc: cgroups@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Creating cgroup hierearchies of unreasonable size can affect
overall system performance. A user might want to limit the
size of cgroup hierarchy. This is especially important if a user
is delegating some cgroup sub-tree.
To address this issue, introduce an ability to control
the size of cgroup hierarchy.
The cgroup.max.descendants control file allows to set the maximum
allowed number of descendant cgroups.
The cgroup.max.depth file controls the maximum depth of the cgroup
tree. Both are single value r/w files, with "max" default value.
The control files exist on each hierarchy level (including root).
When a new cgroup is created, we check the total descendants
and depth limits on each level, and if none of them are exceeded,
a new cgroup is created.
Only alive cgroups are counted, removed (dying) cgroups are
ignored.
Signed-off-by: Roman Gushchin <guro@fb.com>
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: Waiman Long <longman@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: kernel-team@fb.com
Cc: cgroups@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Keep track of the number of online and dying descent cgroups.
This data will be used later to add an ability to control cgroup
hierarchy (limit the depth and the number of descent cgroups)
and display hierarchy stats.
Signed-off-by: Roman Gushchin <guro@fb.com>
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: Waiman Long <longman@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: kernel-team@fb.com
Cc: cgroups@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Chunyu Hu reported:
"per_cpu trace directories and files are created for all possible cpus,
but only the cpus which have ever been on-lined have their own per cpu
ring buffer (allocated by cpuhp threads). While trace_buffers_open, the
open handler for trace file 'trace_pipe_raw' is always trying to access
field of ring_buffer_per_cpu, and would panic with the NULL pointer.
Align the behavior of trace_pipe_raw with trace_pipe, that returns -NODEV
when openning it if that cpu does not have trace ring buffer.
Reproduce:
cat /sys/kernel/debug/tracing/per_cpu/cpu31/trace_pipe_raw
(cpu31 is never on-lined, this is a 16 cores x86_64 box)
Tested with:
1) boot with maxcpus=14, read trace_pipe_raw of cpu15.
Got -NODEV.
2) oneline cpu15, read trace_pipe_raw of cpu15.
Get the raw trace data.
Call trace:
[ 5760.950995] RIP: 0010:ring_buffer_alloc_read_page+0x32/0xe0
[ 5760.961678] tracing_buffers_read+0x1f6/0x230
[ 5760.962695] __vfs_read+0x37/0x160
[ 5760.963498] ? __vfs_read+0x5/0x160
[ 5760.964339] ? security_file_permission+0x9d/0xc0
[ 5760.965451] ? __vfs_read+0x5/0x160
[ 5760.966280] vfs_read+0x8c/0x130
[ 5760.967070] SyS_read+0x55/0xc0
[ 5760.967779] do_syscall_64+0x67/0x150
[ 5760.968687] entry_SYSCALL64_slow_path+0x25/0x25"
This was introduced by the addition of the feature to reuse reader pages
instead of re-allocating them. The problem is that the allocation of a
reader page (which is per cpu) does not check if the cpu is online and set
up for the ring buffer.
Link: http://lkml.kernel.org/r/1500880866-1177-1-git-send-email-chuhu@redhat.com
Cc: stable@vger.kernel.org
Fixes: 73a757e631 ("ring-buffer: Return reader page back into existing ring buffer")
Reported-by: Chunyu Hu <chuhu@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
If ring_buffer_alloc() or one of the next couple function calls fail
then we should return -ENOMEM but the current code returns success.
Link: http://lkml.kernel.org/r/20170801110201.ajdkct7vwzixahvx@mwanda
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: stable@vger.kernel.org
Fixes: b32614c034 ('tracing/rb: Convert to hotplug state machine')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The clear_boot_tracer function is used to reset the default_bootup_tracer
string to prevent it from being accessed after boot, as it originally points
to init data. But since clear_boot_tracer() is called via the
init_lateinit() call, it races with the initcall for registering the hwlat
tracer. If someone adds "ftrace=hwlat" to the kernel command line, depending
on how the linker sets up the text, the saved command line may be cleared,
and the hwlat tracer never is initialized.
Simply have the clear_boot_tracer() be called by initcall_lateinit_sync() as
that's for tasks to be called after lateinit.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=196551
Cc: stable@vger.kernel.org
Fixes: e7c15cd8a ("tracing: Added hardware latency tracer")
Reported-by: Zamir SUN <sztsian@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
'perf cqm' never worked due to the incompatibility between perf
infrastructure and cqm hardware support. The hardware uses RMIDs to
track the llc occupancy of tasks and these RMIDs are per package. This
makes monitoring a hierarchy like cgroup along with monitoring of tasks
separately difficult and several patches sent to lkml to fix them were
NACKed. Further more, the following issues in the current perf cqm make
it almost unusable:
1. No support to monitor the same group of tasks for which we do
allocation using resctrl.
2. It gives random and inaccurate data (mostly 0s) once we run out
of RMIDs due to issues in Recycling.
3. Recycling results in inaccuracy of data because we cannot
guarantee that the RMID was stolen from a task when it was not
pulling data into cache or even when it pulled the least data. Also
for monitoring llc_occupancy, if we stop using an RMID_x and then
start using an RMID_y after we reclaim an RMID from an other event,
we miss accounting all the occupancy that was tagged to RMID_x at a
later perf_count.
2. Recycling code makes the monitoring code complex including
scheduling because the event can lose RMID any time. Since MBM
counters count bandwidth for a period of time by taking snap shot of
total bytes at two different times, recycling complicates the way we
count MBM in a hierarchy. Also we need a spin lock while we do the
processing to account for MBM counter overflow. We also currently
use a spin lock in scheduling to prevent the RMID from being taken
away.
4. Lack of support when we run different kind of event like task,
system-wide and cgroup events together. Data mostly prints 0s. This
is also because we can have only one RMID tied to a cpu as defined
by the cqm hardware but a perf can at the same time tie multiple
events during one sched_in.
5. No support of monitoring a group of tasks. There is partial support
for cgroup but it does not work once there is a hierarchy of cgroups
or if we want to monitor a task in a cgroup and the cgroup itself.
6. No support for monitoring tasks for the lifetime without perf
overhead.
7. It reported the aggregate cache occupancy or memory bandwidth over
all sockets. But most cloud and VMM based use cases want to know the
individual per-socket usage.
Signed-off-by: Vikas Shivappa <vikas.shivappa@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: ravi.v.shankar@intel.com
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
Cc: peterz@infradead.org
Cc: eranian@google.com
Cc: vikas.shivappa@intel.com
Cc: ak@linux.intel.com
Cc: davidcc@google.com
Cc: reinette.chatre@intel.com
Link: http://lkml.kernel.org/r/1501017287-28083-2-git-send-email-vikas.shivappa@linux.intel.com
Two minor conflicts in virtio_net driver (bug fix overlapping addition
of a helper) and MAINTAINERS (new driver edit overlapping revamp of
PHY entry).
Signed-off-by: David S. Miller <davem@davemloft.net>
This makes it possible to preserve basic futex support and compile out the
PI support when RT mutexes are not available.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Darren Hart <dvhart@infradead.org>
Link: http://lkml.kernel.org/r/alpine.LFD.2.20.1708010024190.5981@knanqh.ubzr
With Android UI and benchmarks the latency of cpufreq response to
certain scheduling events can become very critical. Currently, callbacks
into cpufreq governors are only made from the scheduler if the target
CPU of the event is the same as the current CPU. This means there are
certain situations where a target CPU may not run the cpufreq governor
for some time.
One testcase to show this behavior is where a task starts running on
CPU0, then a new task is also spawned on CPU0 by a task on CPU1. If the
system is configured such that the new tasks should receive maximum
demand initially, this should result in CPU0 increasing frequency
immediately. But because of the above mentioned limitation though, this
does not occur.
This patch updates the scheduler core to call the cpufreq callbacks for
remote CPUs as well.
The schedutil, ondemand and conservative governors are updated to
process cpufreq utilization update hooks called for remote CPUs where
the remote CPU is managed by the cpufreq policy of the local CPU.
The intel_pstate driver is updated to always reject remote callbacks.
This is tested with couple of usecases (Android: hackbench, recentfling,
galleryfling, vellamo, Ubuntu: hackbench) on ARM hikey board (64 bit
octa-core, single policy). Only galleryfling showed minor improvements,
while others didn't had much deviation.
The reason being that this patch only targets a corner case, where
following are required to be true to improve performance and that
doesn't happen too often with these tests:
- Task is migrated to another CPU.
- The task has high demand, and should take the target CPU to higher
OPPs.
- And the target CPU doesn't call into the cpufreq governor until the
next tick.
Based on initial work from Steve Muckle.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Saravana Kannan <skannan@codeaurora.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
For e.g. HZ=100, timer being 430 jiffies in the future, and 32 bit
unsigned int, there is an overflow on unsigned int right-hand side
of the expression which results with wrong values being returned.
Type cast the multiplier to 64bit to avoid that issue.
Fixes: 46c8f0b077 ("timers: Fix get_next_timer_interrupt() computation")
Signed-off-by: Matija Glavinic Pecotic <matija.glavinic-pecotic.ext@nokia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Cc: khilman@baylibre.com
Cc: akpm@linux-foundation.org
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/a7900f04-2a21-c9fd-67be-ab334d459ee5@nokia.com
Pull networking fixes from David Miller:
1) Handle notifier registry failures properly in tun/tap driver, from
Tonghao Zhang.
2) Fix bpf verifier handling of subtraction bounds and add a testcase
for this, from Edward Cree.
3) Increase reset timeout in ftgmac100 driver, from Ben Herrenschmidt.
4) Fix use after free in prd_retire_rx_blk_timer_exired() in AF_PACKET,
from Cong Wang.
5) Fix SElinux regression due to recent UDP optimizations, from Paolo
Abeni.
6) We accidently increment IPSTATS_MIB_FRAGFAILS in the ipv6 code
paths, fix from Stefano Brivio.
7) Fix some mem leaks in dccp, from Xin Long.
8) Adjust MDIO_BUS kconfig deps to avoid build errors, from Arnd
Bergmann.
9) Mac address length check and buffer size fixes from Cong Wang.
10) Don't leak sockets in ipv6 udp early demux, from Paolo Abeni.
11) Fix return value when copy_from_user() fails in
bpf_prog_get_info_by_fd(), from Daniel Borkmann.
12) Handle PHY_HALTED properly in phy library state machine, from
Florian Fainelli.
13) Fix OOPS in fib_sync_down_dev(), from Ido Schimmel.
14) Fix truesize calculation in virtio_net which led to performance
regressions, from Michael S Tsirkin.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (76 commits)
samples/bpf: fix bpf tunnel cleanup
udp6: fix jumbogram reception
ppp: Fix a scheduling-while-atomic bug in del_chan
Revert "net: bcmgenet: Remove init parameter from bcmgenet_mii_config"
virtio_net: fix truesize for mergeable buffers
mv643xx_eth: fix of_irq_to_resource() error check
MAINTAINERS: Add more files to the PHY LIBRARY section
ipv4: fib: Fix NULL pointer deref during fib_sync_down_dev()
net: phy: Correctly process PHY_HALTED in phy_stop_machine()
sunhme: fix up GREG_STAT and GREG_IMASK register offsets
bpf: fix bpf_prog_get_info_by_fd to dump correct xlated_prog_len
tcp: avoid bogus gcc-7 array-bounds warning
net: tc35815: fix spelling mistake: "Intterrupt" -> "Interrupt"
bpf: don't indicate success when copy_from_user fails
udp6: fix socket leak on early demux
net: thunderx: Fix BGX transmit stall due to underflow
Revert "vhost: cache used event for better performance"
team: use a larger struct for mac address
net: check dev->addr_len for dev_set_mac_address()
phy: bcm-ns-usb3: fix MDIO_BUS dependency
...
Pull cgroup fixes from Tejun Heo:
"Several cgroup bug fixes.
- cgroup core was calling a migration callback on empty migrations,
which could make cpuset crash.
- There was a very subtle bug where the controller interface files
aren't created directly when cgroup2 is mounted. Because later
operations create them, this bug didn't get noticed earlier.
- Failed writes to cgroup.subtree_control were incorrectly returning
zero"
* 'for-4.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: fix error return value from cgroup_subtree_control()
cgroup: create dfl_root files on subsys registration
cgroup: don't call migration methods if there are no tasks to migrate
Pull workqueue fixes from Tejun Heo:
"Two notable fixes.
- While adding NUMA affinity support to unbound workqueues, the
assumption that an unbound workqueue with max_active == 1 is
ordered was broken.
The plan was to use explicit alloc_ordered_workqueue() for those
cases. Unfortunately, I forgot to update the documentation properly
and we grew a handful of use cases which depend on that assumption.
While we want to convert them to alloc_ordered_workqueue(), we
don't really lose anything by enforcing ordered execution on
unbound max_active == 1 workqueues and it doesn't make sense to
risk subtle bugs. Restore the assumption.
- Workqueue assumes that CPU <-> NUMA node mapping remains static.
This is a general assumption - we don't have any synchronization
mechanism around CPU <-> node mapping. Unfortunately, powerpc may
change the mapping dynamically leading to crashes. Michael added a
workaround so that we at least don't crash while powerpc hotplug
code gets updated"
* 'for-4.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Work around edge cases for calc of pool's cpumask
workqueue: implicit ordered attribute should be overridable
workqueue: restore WQ_UNBOUND/max_active==1 to be ordered
This patch replaces an rwlock and raw notifier by an atomic notifier
protected by a spin_lock and RCU.
The main reason for this change is due to a 'scheduling while atomic'
bug with RT kernels on ARM/ARM64. On ARM/ARM64, the rwlock
cpu_pm_notifier_lock in cpu_pm_enter/exit() causes a potential
schedule after IRQ disable in the idle call chain:
cpu_startup_entry
cpu_idle_loop
local_irq_disable()
cpuidle_idle_call
call_cpuidle
cpuidle_enter
cpuidle_enter_state
->enter :arm_enter_idle_state
cpu_pm_enter/exit
CPU_PM_CPU_IDLE_ENTER
read_lock(&cpu_pm_notifier_lock); <-- sleep in idle
__rt_spin_lock();
schedule();
The kernel panic is here:
[ 4.609601] BUG: scheduling while atomic: swapper/1/0/0x00000002
[ 4.609608] [<ffff0000086fae70>] arm_enter_idle_state+0x18/0x70
[ 4.609614] Modules linked in:
[ 4.609615] [<ffff0000086f9298>] cpuidle_enter_state+0xf0/0x218
[ 4.609620] [<ffff0000086f93f8>] cpuidle_enter+0x18/0x20
[ 4.609626] Preemption disabled at:
[ 4.609627] [<ffff0000080fa234>] call_cpuidle+0x24/0x40
[ 4.609635] [<ffff000008882fa4>] schedule_preempt_disabled+0x1c/0x28
[ 4.609639] [<ffff0000080fa49c>] cpu_startup_entry+0x154/0x1f8
[ 4.609645] [<ffff00000808e004>] secondary_start_kernel+0x15c/0x1a0
Daniel Lezcano said this notification is needed on arm/arm64 platforms.
Sebastian suggested using atomic_notifier instead of rwlock, which is not
only removing the sleeping in idle, but also improving latency.
Tony Lindgren found a miss use that rcu_read_lock used after rcu_idle_enter
Paul McKenney suggested trying RCU_NONIDLE.
Signed-off-by: Alex Shi <alex.shi@linaro.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
[ rjw: Subject & changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull scheduler fixes from Thomas Gleixner:
"Two patches addressing build warnings caused by inconsistent kernel
doc comments"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/wait: Clean up some documentation warnings
sched/core: Fix some documentation build warnings
bpf_prog_size(prog->len) is not the correct length we want to dump
back to user space. The code in bpf_prog_get_info_by_fd() uses this
to copy prog->insnsi to user space, but bpf_prog_size(prog->len) also
includes the size of struct bpf_prog itself plus program instructions
and is usually used either in context of accounting or for bpf_prog_alloc()
et al, thus we copy out of bounds in bpf_prog_get_info_by_fd()
potentially. Use the correct bpf_prog_insn_size() instead.
Fixes: 1e27097690 ("bpf: Add BPF_OBJ_GET_INFO_BY_FD")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
err in bpf_prog_get_info_by_fd() still holds 0 at that time from prior
check_uarg_tail_zero() check. Explicitly return -EFAULT instead, so
user space can be notified of buggy behavior.
Fixes: 1e27097690 ("bpf: Add BPF_OBJ_GET_INFO_BY_FD")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently cfq/bfq/blk-throttle output cgroup info in trace in their own
way. Now we have standard blktrace API for this, so convert them to use
it.
Note, this changes the behavior a little bit. cgroup info isn't output
by default, we only do this with 'blk_cgroup' option enabled. cgroup
info isn't output as a string by default too, we only do this with
'blk_cgname' option enabled. Also cgroup info is output in different
position of the note string. I think these behavior changes aren't a big
issue (actually we make trace data shorter which is good), since the
blktrace note is solely for debugging.
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
By default we output cgroup id in blktrace. This adds an option to
display cgroup path. Since get cgroup path is a relativly heavy
operation, we don't enable it by default.
with the option enabled, blktrace will output something like this:
dd-1353 [007] d..2 293.015252: 8,0 /test/level D R 24 + 8 [dd]
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently blktrace isn't cgroup aware. blktrace prints out task name of
current context, but the task of current context isn't always in the
cgroup where the BIO comes from. We can't use task name to find out IO
cgroup. For example, Writeback BIOs always comes from flusher thread but
the BIOs are for different blk cgroups. Request could be requeued and
dispatched from completely different tasks. MD/DM are another examples.
This patch tries to fix the gap. We print out cgroup fhandle info in
blktrace. Userspace can use open_by_handle_at() syscall to find the
cgroup by fhandle. Or userspace can use name_to_handle_at() syscall to
find fhandle for a cgroup and use a BPF program to filter out blktrace
for a specific cgroup.
We add a new 'blk_cgroup' trace option for blk tracer. It's default off.
Application which doesn't know the new option isn't affected. When it's
on, we output fhandle info right after blk_io_trace with an extra bit
set in event action. So from application point of view, blktrace with
the option will output new actions.
I didn't change blk trace event yet, since I'm not sure if changing the
trace event output is an ABI issue. If not, I'll do it later.
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now we have the facilities to implement exportfs operations. The idea is
cgroup can export the fhandle info to userspace, then userspace uses
fhandle to find the cgroup name. Another example is userspace can get
fhandle for a cgroup and BPF uses the fhandle to filter info for the
cgroup.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Per-cpu workqueues have been tripping CPU affinity sanity checks while
a CPU is being offlined. A per-cpu kworker ends up running on a CPU
which isn't its target CPU while the CPU is online but inactive.
While the scheduler allows kthreads to wake up on an online but
inactive CPU, it doesn't allow a running kthread to be migrated to
such a CPU, which leads to an odd situation where setting affinity on
a sleeping and running kthread leads to different results.
Each mem-reclaim workqueue has one rescuer which guarantees forward
progress and the rescuer needs to bind itself to the CPU which needs
help in making forward progress; however, due to the above issue,
while set_cpus_allowed_ptr() succeeds, the rescuer doesn't end up on
the correct CPU if the CPU is in the process of going offline,
tripping the sanity check and executing the work item on the wrong
CPU.
This patch updates __migrate_task() so that kthreads can be migrated
into an inactive but online CPU.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There is an underlying assumption/trade-off in many layers of the Linux
system that CPU <-> node mapping is static. This is despite the presence
of features like NUMA and 'hotplug' that support the dynamic addition/
removal of fundamental system resources like CPUs and memory. PowerPC
systems, however, do provide extensive features for the dynamic change
of resources available to a system.
Currently, there is little or no synchronization protection around the
updating of the CPU <-> node mapping, and the export/update of this
information for other layers / modules. In systems which can change
this mapping during 'hotplug', like PowerPC, the information is changing
underneath all layers that might reference it.
This patch attempts to ensure that a valid, usable cpumask attribute
is used by the workqueue infrastructure when setting up new resource
pools. It prevents a crash that has been observed when an 'empty'
cpumask is passed along to the worker/task scheduling code. It is
intended as a temporary workaround until a more fundamental review and
correction of the issue can be done.
[With additions to the patch provided by Tejun Hao <tj@kernel.org>]
Signed-off-by: Michael Bringmann <mwb@linux.vnet.ibm.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Tree RCU guarantees that every online CPU has a memory barrier between
any given grace period and any of that CPU's RCU read-side sections that
must be ordered against that grace period. Since RCU doesn't always
know where read-side critical sections are, the actual implementation
guarantees order against prior and subsequent non-idle non-offline code,
whether in an RCU read-side critical section or not. As a result, there
does not need to be a memory barrier at the end of synchronize_rcu()
and friends because the ordering internal to the grace period has
ordered every CPU's post-grace-period execution against each CPU's
pre-grace-period execution, again for all non-idle online CPUs.
In contrast, SRCU can have non-idle online CPUs that are completely
uninvolved in a given SRCU grace period, for example, a CPU that
never runs any SRCU read-side critical sections and took no part in
the grace-period processing. It is in theory possible for a given
synchronize_srcu()'s wakeup to be delivered to a CPU that was completely
uninvolved in the prior SRCU grace period, which could mean that the
code following that synchronize_srcu() would end up being unordered with
respect to both the grace period and any pre-existing SRCU read-side
critical sections.
This commit therefore adds an smp_mb() to the end of __synchronize_srcu(),
which prevents this scenario from occurring.
Reported-by: Lance Roy <ldr709@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Lance Roy <ldr709@gmail.com>
Cc: <stable@vger.kernel.org> # 4.12.x
That commit was part of the changes moving x86 to the generic CPU hotplug
interrupt migration code. The force flag was required on x86 before the
hierarchical irqdomain rework, but invoking set_affinity() with force=true
stayed and had no side effects.
At some point in the past, the force flag got repurposed to support the
exynos timer interrupt affinity setting to a not yet online CPU, so the
interrupt controller callback does not verify the supplied affinity mask
against cpu_online_mask.
Setting the flag in the CPU hotplug code causes the cpu online masking to
be blocked on these irq controllers and results in potentially affining an
interrupt to the CPU which is unplugged, i.e. instead of moving it away,
it's just reassigned to it.
As the force flags is not longer needed on x86, it's safe to revert that
patch so the ARM irqchips which use the force flag work again.
Add comments to that effect, so this won't happen again.
Note: The online mask handling should be done in the generic code and the
force flag and the masking in the irq chips removed all together, but
that's not a change possible for 4.13.
Fixes: 77f85e66aa ("genirq/cpuhotplug: Set force affinity flag on hotplug migration")
Reported-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: LAK <linux-arm-kernel@lists.infradead.org>
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1707271217590.3109@nanos
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
printk_late_init() is responsible for disabling boot consoles that
use init memory. It checks the address of struct console for this.
But this is not enough. For example, there are several early
consoles that have write() method in the init section and
struct console in the normal section. They are not disabled
and could cause fancy and hard to debug system states.
It is even more complicated by the macros EARLYCON_DECLARE() and
OF_EARLYCON_DECLARE() where various struct members are set at
runtime by the provided setup() function.
I have tried to reproduce this problem and forced the classic uart
early console to stay using keep_bootcon parameter. In particular
I used earlycon=uart,io,0x3f8 keep_bootcon console=ttyS0,115200.
The system did not boot:
[ 1.570496] PM: Image not found (code -22)
[ 1.570496] PM: Image not found (code -22)
[ 1.571886] PM: Hibernation image not present or could not be loaded.
[ 1.571886] PM: Hibernation image not present or could not be loaded.
[ 1.576407] Freeing unused kernel memory: 2528K
[ 1.577244] kernel tried to execute NX-protected page - exploit attempt? (uid: 0)
The double lines are caused by having both early uart console and
ttyS0 console enabled at the same time. The early console stopped
working when the init memory was freed. Fortunately, the invalid
call was caught by the NX-protexted page check and did not cause
any silent fancy problems.
This patch adds a check for many other addresses stored in
struct console. It omits setup() and match() that are used
only when the console is registered. Therefore they have
already been used at this point and there is no reason
to use them again.
Link: http://lkml.kernel.org/r/1500036673-7122-3-git-send-email-pmladek@suse.com
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alan Cox <gnomes@lxorguk.ukuu.org.uk>
Cc: "Fabio M. Di Nitto" <fdinitto@redhat.com>
Cc: linux-serial@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Commit 4c30c6f566 ("kernel/printk: do not turn off bootconsole in
printk_late_init() if keep_bootcon") added a check on keep_bootcon to
ensure that boot consoles were kept around until the real console is
registered.
This can lead to problems if the boot console data and code are in the
init section, since it can be freed before the boot console is
unregistered.
Commit 81cc26f2bd ("printk: only unregister boot consoles when
necessary") fixed this a better way. It allowed to keep boot consoles
that did not use init data. Unfortunately it did not remove the check
of keep_bootcon.
This can lead to crashes and weird panics when the bootconsole is
accessed after free, especially if page poisoning is in use and the
code / data have been overwritten with a poison value.
To prevent this, always free the boot console if it is within the init
section. In addition, print a warning about that the console is removed
prematurely.
Finally there is a new comment how to avoid the warning. It replaced
an explanation that duplicated a more comprehensive function
description few lines above.
Fixes: 4c30c6f566 ("kernel/printk: do not turn off bootconsole in printk_late_init() if keep_bootcon")
Link: http://lkml.kernel.org/r/1500036673-7122-2-git-send-email-pmladek@suse.com
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alan Cox <gnomes@lxorguk.ukuu.org.uk>
Cc: "Fabio M. Di Nitto" <fdinitto@redhat.com>
Cc: linux-serial@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
[pmladek@suse.com: print the warning, code and comments clean up]
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
With commit <ddb9baa82226> ("printk: report lost messages in printk
safe/nmi contexts") and commit <8b1742c9c207> ("printk: remove zap_locks()
function"), it seems we can remove initialization, "=0", of text_len and
directly assign result of log_output to printed_len.
Link: http://lkml.kernel.org/r/1499755255-6258-1-git-send-email-vichy.kuo@gmail.com
Cc: rostedt@goodmis.org
Cc: linux-kernel@vger.kernel.org
Cc: joe@perches.com
Signed-off-by: Pierre Kuo <vichy.kuo@gmail.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Make iowait_boost and iowait_boost_max as unsigned int since its unit
is kHz and this is consistent with struct cpufreq_policy. Also change
the local variables in sugov_iowait_boost() to match this.
Signed-off-by: Joel Fernandes <joelaf@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently the iowait_boost feature in schedutil makes the frequency
go to max on iowait wakeups. This feature was added to handle a case
that Peter described where the throughput of operations involving
continuous I/O requests [1] is reduced due to running at a lower
frequency, however the lower throughput itself causes utilization to
be low and hence causing frequency to be low hence its "stuck".
Instead of going to max, its also possible to achieve the same effect
by ramping up to max if there are repeated in_iowait wakeups
happening. This patch is an attempt to do that. We start from a lower
frequency (policy->min) and double the boost for every consecutive
iowait update until we reach the maximum iowait boost frequency
(iowait_boost_max).
I ran a synthetic test (continuous O_DIRECT writes in a loop) on an
x86 machine with intel_pstate in passive mode using schedutil. In
this test the iowait_boost value ramped from 800MHz to 4GHz in 60ms.
The patch achieves the desired improved throughput as the existing
behavior.
[1] https://patchwork.kernel.org/patch/9735885/
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Suggested-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Joel Fernandes <joelaf@google.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The newly added irqchip_fwnode_ops structure is not exported, which can
lead to link errors:
ERROR: "irqchip_fwnode_ops" [drivers/gpio/gpio-xgene-sb.ko] undefined!
I checked that all other such symbols that were introduced are
exported if they need to be, this is the only missing one.
Fixes: db3e50f323 (device property: Get rid of struct fwnode_handle type field)
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Set dynamic_switching to 'true' to disallow use of schedutil governor
for platforms with transition_latency set to CPUFREQ_ETERNAL, as they
may not want to do automatic dynamic frequency switching.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
After adopting callbacks from a newly offlined CPU, the adopting CPU
checks to make sure that its callback list's count is zero only if the
list has no callbacks and vice versa. Unfortunately, it does so after
enabling interrupts, which means that false positives are possible due to
interrupt handlers invoking call_rcu(). Although these false positives
are improbable, rcutorture did make it happen once.
This commit therefore moves this check to an irq-disabled region of code,
thus suppressing the false positive.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Given changes to callback migration, rcu_cblist_head(),
rcu_cblist_tail(), rcu_cblist_count_cbs(), rcu_segcblist_segempty(),
rcu_segcblist_dequeued_lazy(), and rcu_segcblist_new_cbs() are
no longer used. This commit therefore removes them.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Given that the rcu_state structure's >orphan_pend and ->orphan_done
fields are used only during migration of callbacks from the recently
offlined CPU to a surviving CPU, if rcu_send_cbs_to_orphanage() and
rcu_adopt_orphan_cbs() are combined, these fields can become local
variables in the combined function. This commit therefore combines
rcu_send_cbs_to_orphanage() and rcu_adopt_orphan_cbs() into a new
rcu_segcblist_merge() function and removes the ->orphan_pend and
->orphan_done fields.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
When migrating callbacks from a newly offlined CPU, we are already
holding the root rcu_node structure's lock, so it costs almost nothing
to advance and accelerate the newly migrated callbacks. This patch
therefore makes this advancing and acceleration happen.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The ->orphan_lock is acquired and released only within the
rcu_migrate_callbacks() function, which now acquires the root rcu_node
structure's ->lock. This commit therefore eliminates the ->orphan_lock
in favor of the root rcu_node structure's ->lock.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
It is possible that the outgoing CPU is unaware of recent grace periods,
and so it is also possible that some of its pending callbacks are actually
ready to be invoked. The current callback-migration code would needlessly
force these callbacks to pass through another grace period. This commit
therefore invokes rcu_advance_cbs() on the outgoing CPU's callbacks in
order to give them full credit for having passed through any recent
grace periods.
This also fixes an odd theoretical bug where there are no callbacks in
the system except for those on the outgoing CPU, none of those callbacks
have yet been associated with a grace-period number, there is never again
another callback registered, and the surviving CPU never again takes a
scheduling-clock interrupt, never goes idle, and never enters nohz_full
userspace execution. Yes, this is (just barely) possible. It requires
that the surviving CPU be a nohz_full CPU, that its scheduler-clock
interrupt be shut off, and that it loop forever in the kernel. You get
bonus points if you can make this one happen! ;-)
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
RCU's CPU-hotplug callback-migration code first moves the outgoing
CPU's callbacks to ->orphan_done and ->orphan_pend, and only then
moves them to the NOCB callback list. This commit avoids the
extra step (and simplifies the code) by moving the callbacks directly
from the outgoing CPU's callback list to the NOCB callback list.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The current CPU-hotplug RCU-callback-migration code checks
for the source (newly offlined) CPU being a NOCBs CPU down in
rcu_send_cbs_to_orphanage(). This commit simplifies callback migration a
bit by moving this check up to rcu_migrate_callbacks(). This commit also
adds a check for the source CPU having no callbacks, which eases analysis
of the rcu_send_cbs_to_orphanage() and rcu_adopt_orphan_cbs() functions.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The rcu_node structure's ->n_cbs_orphaned and ->n_cbs_adopted fields
are updated, but never read. This commit therefore removes them.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The torture status line contains a series of values preceded by "onoff:".
The last value in that line, the one preceding the "HZ=" string, is
always zero. The reason that it is always zero is that torture_offline()
was incrementing the sum_offl pointer instead of the value that this
pointer referenced. This commit therefore makes this increment operate
on the statistic rather than the pointer to the statistic.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The update of the ->expmaskinitnext and of ->ncpus are unsynchronized,
with the value of ->ncpus being incremented long before the corresponding
->expmaskinitnext mask is updated. If an RCU expedited grace period
sees ->ncpus change, it will update the ->expmaskinit masks from the new
->expmaskinitnext masks. But it is possible that ->ncpus has already
been updated, but the ->expmaskinitnext masks still have their old values.
For the current expedited grace period, no harm done. The CPU could not
have been online before the grace period started, so there is no need to
wait for its non-existent pre-existing readers.
But the next RCU expedited grace period is in a world of hurt. The value
of ->ncpus has already been updated, so this grace period will assume
that the ->expmaskinitnext masks have not changed. But they have, and
they won't be taken into account until the next never-been-online CPU
comes online. This means that RCU will be ignoring some CPUs that it
should be paying attention to.
The solution is to update ->ncpus and ->expmaskinitnext while holding
the ->lock for the rcu_node structure containing the ->expmaskinitnext
mask. Because smp_store_release() is now used to update ->ncpus and
smp_load_acquire() is now used to locklessly read it, if the expedited
grace period sees ->ncpus change, then the updating CPU has to
already be holding the corresponding ->lock. Therefore, when the
expedited grace period later acquires that ->lock, it is guaranteed
to see the new value of ->expmaskinitnext.
On the other hand, if the expedited grace period loads ->ncpus just
before an update, earlier full memory barriers guarantee that
the incoming CPU isn't far enough along to be running any RCU readers.
This commit therefore makes the required change.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
RCU callbacks must be migrated away from an outgoing CPU, and this is
done near the end of the CPU-hotplug operation, after the outgoing CPU is
long gone. Unfortunately, this means that other CPU-hotplug callbacks
can execute while the outgoing CPU's callbacks are still immobilized
on the long-gone CPU's callback lists. If any of these CPU-hotplug
callbacks must wait, either directly or indirectly, for the invocation
of any of the immobilized RCU callbacks, the system will hang.
This commit avoids such hangs by migrating the callbacks away from the
outgoing CPU immediately upon its departure, shortly after the return
from __cpu_die() in takedown_cpu(). Thus, RCU is able to advance these
callbacks and invoke them, which allows all the after-the-fact CPU-hotplug
callbacks to wait on these RCU callbacks without risk of a hang.
While in the neighborhood, this commit also moves rcu_send_cbs_to_orphanage()
and rcu_adopt_orphan_cbs() under a pre-existing #ifdef to avoid including
dead code on the one hand and to avoid define-without-use warnings on the
other hand.
Reported-by: Jeffrey Hugo <jhugo@codeaurora.org>
Link: http://lkml.kernel.org/r/db9c91f6-1b17-6136-84f0-03c3c2581ab4@codeaurora.org
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Richard Weinberger <richard@nod.at>
5c0338c687 ("workqueue: restore WQ_UNBOUND/max_active==1 to be
ordered") automatically enabled ordered attribute for unbound
workqueues w/ max_active == 1. Because ordered workqueues reject
max_active and some attribute changes, this implicit ordered mode
broke cases where the user creates an unbound workqueue w/ max_active
== 1 and later explicitly changes the related attributes.
This patch distinguishes explicit and implicit ordered setting and
overrides from attribute changes if implict.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 5c0338c687 ("workqueue: restore WQ_UNBOUND/max_active==1 to be ordered")
Explain cgroup_enable_threaded() and note that the function can never
be called on the root cgroup.
Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-by: Waiman Long <longman@redhat.com>
cgroup_enable_threaded() checks that the cgroup doesn't have any tasks
or children and fails the operation if so. This test is unnecessary
because the first part is already checked by
cgroup_can_be_thread_root() and the latter is unnecessary. The latter
actually cause a behavioral oddity. Please consider the following
hierarchy. All cgroups are domains.
A
/ \
B C
\
D
If B is made threaded, C and D becomes invalid domains. Due to the no
children restriction, threaded mode can't be enabled on C. For C and
D, the only thing the user can do is removal.
There is no reason for this restriction. Remove it.
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
There is no agreed-upon definition of spin_unlock_wait()'s semantics,
and it appears that all callers could do just as well with a lock/unlock
pair. This commit therefore replaces the spin_unlock_wait() call in
task_work_run() with a spin_lock_irq() and a spin_unlock_irq() aruond
the cmpxchg() dequeue loop. This should be safe from a performance
perspective because ->pi_lock is local to the task and because calls to
the other side of the race, task_work_cancel(), should be rare.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The handling of RCU's no-CBs CPUs has a maintenance headache, namely
that if call_rcu() is invoked with interrupts disabled, the rcuo kthread
wakeup must be defered to a point where we can be sure that scheduler
locks are not held. Of course, there are a lot of code paths leading
from an interrupts-disabled invocation of call_rcu(), and missing any
one of these can result in excessive callback-invocation latency, and
potentially even system hangs.
This commit therefore uses a timer to guarantee that the wakeup will
eventually occur. If one of the deferred-wakeup points kicks in, then
the timer is simply cancelled.
This commit also fixes up an incomplete removal of commits that were
intended to plug remaining exit paths, which should have the added
benefit of reducing the overhead of RCU's context-switch hooks. In
addition, it simplifies leader-to-follower callback-list handoff by
introducing locking. The call_rcu()-to-leader handoff continues to
use atomic operations in order to maintain good real-time latency for
common-case use of call_rcu().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Dan Carpenter fix for mod_timer() usage bug found by smatch. ]
ddebug_remove_module() use mod->name to find the ddebug_table of the
module and remove it. But dynamic_debug_setup() use the first
_ddebug->modname to create ddebug_table for the module. It's ok when
the _ddebug->modname is the same with the mod->name.
But livepatch module is special, it may contain _ddebugs of other
modules, the modname of which is different from the name of livepatch
module. So ddebug_remove_module() can't use mod->name to find the
right ddebug_table and remove it. It can cause kernel crash when we cat
the file <debugfs>/dynamic_debug/control.
Signed-off-by: Zhou Chengming <zhouchengming1@huawei.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
The kerneldoc comments for try_to_wake_up_local() were out of date, leading
to these documentation build warnings:
./kernel/sched/core.c:2080: warning: No description found for parameter 'rf'
./kernel/sched/core.c:2080: warning: Excess function parameter 'cookie' description in 'try_to_wake_up_local'
Update the comment to reflect current reality and give us some peace and
quiet.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-doc@vger.kernel.org
Link: http://lkml.kernel.org/r/20170724135628.695cecfc@lwn.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We forgot to set the error code on two error paths which means that we
return ERR_PTR(0) which is NULL. The caller, find_and_alloc_map(), is
not expecting that and will have a NULL dereference.
Fixes: 546ac1ffb7 ("bpf: add devmap, a map for storing net device references")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Linux kernel invokes call_rcu() from various interrupt/softirq
handlers, but rcutorture does not. This commit therefore adds this
behavior to rcutorture's repertoire.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit augments the grace-period-kthread starvation debugging
messages by adding the last CPU that ran the kthread.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit removes an unused local variable named ts_rem that is
marked __maybe_unused. Yes, the variable was assigned to, but it
was never used beyond that point, hence not needed.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
It appears that at least some of the rcutorture writer stall messages
coincide with unusually long CPU-online operations, for example, no
fewer than 205 seconds in a recent test. It is of course possible that
the writer stall is not unrelated to this unusually long CPU-hotplug
operation, and so this commit adds the rcutorture writer task's CPU to
the stall message to gain more information about this possible connection.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Strings used in event tracing need to be specially handled, for example,
being copied to the trace buffer instead of being pointed to by the trace
buffer. Although the TPS() macro can be used to "launder" pointed-to
strings, this might not be all that effective within a loadable module.
This commit therefore copies rcutorture's strings to the trace buffer.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Now that it is legal to invoke srcu_read_lock() and srcu_read_unlock()
for a given srcu_struct from both process context and {soft,}irq
handlers, it is time to test it. This commit therefore enables
testing of SRCU readers from rcutorture's timer handler, using in_task()
to determine whether or not it is safe to sleep in the SRCU read-side
critical sections.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The synchronize_rcu_tasks() and call_rcu_tasks() APIs are now available
regardless of kernel configuration, so this commit removes the
CONFIG_TASKS_RCU ifdef from rcuperf.c.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit adds printing of SRCU lock/unlock totals, which are just
the sums of the per-CPU counts. Saves a bit of mental arithmetic.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit gets rid of some ugly #ifdefs in rcutorture.c by moving
the SRCU status printing to the SRCU implementations.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The function process_srcu() is not invoked outside of srcutree.c, so
this commit makes it static and drops the EXPORT_SYMBOL_GPL().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Other than lockdep support, Tiny RCU has no need for the
scheduler status. However, Tiny SRCU will need this to control
boot-time behavior independent of lockdep. Therefore, this commit
moves rcu_scheduler_starting() from kernel/rcu/tiny_plugin.h to
kernel/rcu/srcutiny.c. This in turn allows the complete removal of
kernel/rcu/tiny_plugin.h.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Define a common prefix ("PM:") for messages printed by the
code in kernel/power/suspend.c.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Some messages in suspend.c currently print state names from
pm_states[], but that may be confusing if the mem_sleep sysfs
attribute is changed to anything different from "mem", because
in those cases the messages will say either "freeze" or "standby"
after writing "mem" to /sys/power/state.
To avoid the confusion, use mem_sleep_labels[] strings in those
messages instead.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
The pm_test sysfs attribute is under CONFIG_PM_DEBUG, but it doesn't
make sense to provide it if CONFIG_PM_SLEEP is unset, so put it under
CONFIG_PM_SLEEP_DEBUG instead.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Restore the pm_wakeup_pending() check in __device_suspend_noirq()
removed by commit eed4d47efe (ACPI / sleep: Ignore spurious SCI
wakeups from suspend-to-idle) as that allows the function to return
earlier if there's a wakeup event pending already (so that it may
spend less time on carrying out operations that will be reversed
shortly anyway) and rework the main suspend-to-idle loop to take
that optimization into account.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
As a preparation for subsequent changes, rearrange the core
suspend-to-idle code by moving the initial invocation of
dpm_suspend_noirq() into s2idle_loop().
This also causes debug messages from that code to appear in
a less confusing order.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
We have to subtract the src max from the dst min, and vice-versa, since
(e.g.) the smallest result comes from the largest subtrahend.
Fixes: 484611357c ("bpf: allow access into map value arrays")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Today sending a signal with rt_sigqueueinfo and receving it on
a signalfd does not work reliably. The issue is that reading
a signalfd instead of returning a siginfo returns a signalfd_siginfo and
the kernel must convert from one to the other.
The kernel does not currently have the code to deduce which union
members of struct siginfo are in use.
In this patchset I fix that by introducing a new function siginfo_layout
that can look at a siginfo and report which union member of struct
siginfo is in use. Before that I clean up how we populate struct
siginfo.
The siginfo structure has two key members si_signo and si_code. Some
si_codes are signal specific and for those it takes si_signo and si_code
to indicate the members of siginfo that are valid. The rest of the
si_code values are signal independent like SI_USER, SI_KERNEL, SI_QUEUE,
and SI_TIMER and only si_code is needed to indicate which members of
siginfo are valid.
At least that is how POSIX documents them, and how common sense would
indicate they should function. In practice we have been rather sloppy
about maintaining the ABI in linux and we have some exceptions. We have
a couple of buggy architectures that make SI_USER mean something
different when combined with SIGFPE or SIGTRAP. Worse we have
fcntl(F_SETSIG) which results in the si_codes POLL_IN, POLL_OUT,
POLL_MSG, POLL_ERR, POLL_PRI, POLL_HUP being sent with any arbitrary
signal, while the values are in a range that overlaps the signal
specific si_codes.
Thankfully the ambiguous cases with the POLL_NNN si_codes are for
things no sane persion would do that so we can rectify the situtation.
AKA no one cares so we won't cause a regression fixing it.
As part of fixing this I stop leaking the __SI_xxxx codes to userspace
and stop storing them in the high 16bits of si_code. Making the kernel
code fundamentally simpler. We have already confirmed that the one
application that would see this difference in kernel behavior CRIU won't
be affected by this change as it copies values verbatim from one kernel
interface to another.
v3:
- Corrected the patches so they bisect properly
v2:
- Benchmarked the code to confirm no performance changes are visible.
- Reworked the first couple of patches so that TRAP_FIXME and
FPE_FIXME are not exported to userspace.
- Rebased on top of the siginfo cleanup that came in v4.13-rc1
- Updated alpha to use both TRAP_FIXME and FPE_FIXME
Eric W. Biederman (7):
signal/alpha: Document a conflict with SI_USER for SIGTRAP
signal/ia64: Document a conflict with SI_USER with SIGFPE
signal/sparc: Document a conflict with SI_USER with SIGFPE
signal/mips: Document a conflict with SI_USER with SIGFPE
signal/testing: Don't look for __SI_FAULT in userspace
fcntl: Don't use ambiguous SIG_POLL si_codes
signal: Remove kernel interal si_code magic
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
struct siginfo is a union and the kernel since 2.4 has been hiding a union
tag in the high 16bits of si_code using the values:
__SI_KILL
__SI_TIMER
__SI_POLL
__SI_FAULT
__SI_CHLD
__SI_RT
__SI_MESGQ
__SI_SYS
While this looks plausible on the surface, in practice this situation has
not worked well.
- Injected positive signals are not copied to user space properly
unless they have these magic high bits set.
- Injected positive signals are not reported properly by signalfd
unless they have these magic high bits set.
- These kernel internal values leaked to userspace via ptrace_peek_siginfo
- It was possible to inject these kernel internal values and cause the
the kernel to misbehave.
- Kernel developers got confused and expected these kernel internal values
in userspace in kernel self tests.
- Kernel developers got confused and set si_code to __SI_FAULT which
is SI_USER in userspace which causes userspace to think an ordinary user
sent the signal and that it was not kernel generated.
- The values make it impossible to reorganize the code to transform
siginfo_copy_to_user into a plain copy_to_user. As si_code must
be massaged before being passed to userspace.
So remove these kernel internal si codes and make the kernel code simpler
and more maintainable.
To replace these kernel internal magic si_codes introduce the helper
function siginfo_layout, that takes a signal number and an si_code and
computes which union member of siginfo is being used. Have
siginfo_layout return an enumeration so that gcc will have enough
information to warn if a switch statement does not handle all of union
members.
A couple of architectures have a messed up ABI that defines signal
specific duplications of SI_USER which causes more special cases in
siginfo_layout than I would like. The good news is only problem
architectures pay the cost.
Update all of the code that used the previous magic __SI_ values to
use the new SIL_ values and to call siginfo_layout to get those
values. Escept where not all of the cases are handled remove the
defaults in the switch statements so that if a new case is missed in
the future the lack will show up at compile time.
Modify the code that copies siginfo si_code to userspace to just copy
the value and not cast si_code to a short first. The high bits are no
longer used to hold a magic union member.
Fixup the siginfo header files to stop including the __SI_ values in
their constants and for the headers that were missing it to properly
update the number of si_codes for each signal type.
The fixes to copy_siginfo_from_user32 implementations has the
interesting property that several of them perviously should never have
worked as the __SI_ values they depended up where kernel internal.
With that dependency gone those implementations should work much
better.
The idea of not passing the __SI_ values out to userspace and then
not reinserting them has been tested with criu and criu worked without
changes.
Ref: 2.4.0-test1
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
While refactoring, f7b2814bb9 ("cgroup: factor out
cgroup_{apply|finalize}_control() from
cgroup_subtree_control_write()") broke error return value from the
function. The return value from the last operation is always
overridden to zero. Fix it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org # v4.6+
Signed-off-by: Tejun Heo <tj@kernel.org>
Ying Huang
Peter Zijlstra
Kan Liang
Alexander Shishkin
Ingo Molnar
Zhou Chengming
Meng Xu
Dan Carpenter
John Fastabend
Greg Kroah-Hartman
Linus Torvalds
John Stultz
Eric Biggers
Jiri Slaby
Thomas Gleixner
kbuild test robot
Shu Wang
Jesper Dangaard Brouer
Oleg Nesterov
Will Deacon
Mark Rutland
Waiman Long
Steven Rostedt (VMware)
Chunyu Hu
Nicholas Piggin
Daniel Borkmann
Edward Cree
Christoph Hellwig
Marc Zyngier
Martijn Coenen
David S. Miller
Alexey Dobriyan
Martin KaFai Lau
Jamie Iles
Luis R. Rodriguez
Krzysztof Opasiak
David Daney
Srinivas Pandruvada
Viresh Kumar
Kees Cook
Geert Uytterhoeven
Stafford Horne
Paul E. McKenney
Mathieu Desnoyers
Masami Hiramatsu
Boqun Feng
Bartosz Golaszewski
Jan Kara
Catalin Marinas
Nikitas Angelinas
Tyler Hicks
Byungchul Park
Masahiro Yamada
Tejun Heo
Rafael J. Wysocki
Nadav Amit
Johannes Weiner
Anshuman Khandual
Paolo Bonzini
Kirill Tkhai
Prateek Sood
Xie XiuQi
Aleksa Sarai
Cheng Jian
Rik van Riel
Vincent Guittot
leilei.lin
Mel Gorman
Mickaël Salaün
Yonghong Song
Benjamin Peterson
Dmitry V. Levin
Dima Zavin
Kefeng Wang
Roman Gushchin
Vikas Shivappa
Nicolas Pitre
Matija Glavinic Pecotic
Alex Shi
Shaohua Li
Michael Bringmann
Petr Mladek
Matt Redfearn
Pierre Kuo
Joel Fernandes
Arnd Bergmann
Jonathan Corbet
James Morris
Eric W. Biederman