Граф коммитов

41 Коммитов

Автор SHA1 Сообщение Дата
Herbert Xu 4816c94064 lib/mpi: Fix SG miter leak
In mpi_read_raw_from_sgl we may leak the SG miter resouces after
reading the leading zeroes.  This patch fixes this by stopping the
iteration once the leading zeroes have been read.

Fixes: 127827b9c2 ("lib/mpi: Do not do sg_virt")
Reported-by: Nicolai Stange <nicstange@gmail.com>
Tested-by: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-29 18:30:16 +08:00
Herbert Xu 127827b9c2 lib/mpi: Do not do sg_virt
Currently the mpi SG helpers use sg_virt which is completely
broken.  It happens to work with normal kernel memory but will
fail with anything that is not linearly mapped.

This patch fixes this by using the SG iterator helpers.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-01 23:45:18 +08:00
Herbert Xu 9b45b7bba3 crypto: rsa - Generate fixed-length output
Every implementation of RSA that we have naturally generates
output with leading zeroes.  The one and only user of RSA,
pkcs1pad wants to have those leading zeroes in place, in fact
because they are currently absent it has to write those zeroes
itself.

So we shouldn't be stripping leading zeroes in the first place.
In fact this patch makes rsa-generic produce output with fixed
length so that pkcs1pad does not need to do any extra work.

This patch also changes DH to use the new interface.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-01 23:45:18 +08:00
Nicolai Stange 20b5b7f3c2 lib/mpi: refactor mpi_read_from_buffer() in terms of mpi_read_raw_data()
mpi_read_from_buffer() and mpi_read_raw_data() do basically the same thing
except that the former extracts the number of payload bits from the first
two bytes of the input buffer.

Besides that, the data copying logic is exactly the same.

Replace the open coded buffer to MPI instance conversion by a call to
mpi_read_raw_data().

Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-05-31 16:42:01 +08:00
Nicolai Stange cdf24b42c6 lib/mpi: mpi_read_from_buffer(): sanitize short buffer printk
The first two bytes of the input buffer encode its expected length and
mpi_read_from_buffer() prints a console message if the given buffer is too
short.

However, there are some oddities with how this message is printed:
- It is printed at the default loglevel. This is different from the
  one used in the case that the first two bytes' value is unsupportedly
  large, i.e. KERN_INFO.
- The format specifier '%d' is used for unsigned ints.
- It prints the values of nread and *ret_nread. This is redundant since
  the former is always the latter + 1.

Clean this up as follows:
- Use pr_info() rather than printk() with no loglevel.
- Use the format specifiers '%u' in place if '%d'.
- Do not print the redundant 'nread' but the more helpful 'nbytes' value.

Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-05-31 16:42:00 +08:00
Nicolai Stange 7af791e0f0 lib/mpi: mpi_read_from_buffer(): return -EINVAL upon too short buffer
Currently, if the input buffer is shorter than the expected length as
indicated by its first two bytes, an MPI instance of this expected length
will be allocated and filled with as much data as is available. The rest
will remain uninitialized.

Instead of leaving this condition undetected, an error code should be
reported to the caller.

Since this situation indicates that the input buffer's first two bytes,
encoding the number of expected bits, are garbled, -EINVAL is appropriate
here.

If the input buffer is shorter than indicated by its first two bytes,
make mpi_read_from_buffer() return -EINVAL.
Get rid of the 'nread' variable: with the new semantics, the total number
of bytes read from the input buffer is known in advance.

Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-05-31 16:42:00 +08:00
Nicolai Stange 03cdfaad49 lib/mpi: mpi_read_from_buffer(): return error code
mpi_read_from_buffer() reads a MPI from a buffer into a newly allocated
MPI instance. It expects the buffer's leading two bytes to contain the
number of bits, followed by the actual payload.

On failure, it returns NULL and updates the in/out argument ret_nread
somewhat inconsistently:
- If the given buffer is too short to contain the leading two bytes
  encoding the number of bits or their value is unsupported, then
  ret_nread will be cleared.
- If the allocation of the resulting MPI instance fails, ret_nread is left
  as is.

The only user of mpi_read_from_buffer(), digsig_verify_rsa(), simply checks
for a return value of NULL and returns -ENOMEM if that happens.

While this is all of cosmetic nature only, there is another error condition
which currently isn't detectable by the caller of mpi_read_from_buffer():
if the given buffer is too small to hold the number of bits as encoded in
its first two bytes, the return value will be non-NULL and *ret_nread > 0.

In preparation of communicating this condition to the caller, let
mpi_read_from_buffer() return error values by means of the ERR_PTR()
mechanism.

Make the sole caller of mpi_read_from_buffer(), digsig_verify_rsa(),
check the return value for IS_ERR() rather than == NULL. If IS_ERR() is
true, return the associated error value rather than the fixed -ENOMEM.

Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-05-31 16:41:59 +08:00
Nicolai Stange eef0df6a59 lib/mpi: mpi_read_raw_data(): fix nbits calculation
The number of bits, nbits, is calculated in mpi_read_raw_data() as follows:

  nbits = nbytes * 8;

Afterwards, the number of leading zero bits of the first byte get
subtracted:

  nbits -= count_leading_zeros(buffer[0]);

However, count_leading_zeros() takes an unsigned long and thus,
the u8 gets promoted to an unsigned long.

Thus, the above doesn't subtract the number of leading zeros in the most
significant nonzero input byte from nbits, but the number of leading
zeros of the most significant nonzero input byte promoted to unsigned long,
i.e. BITS_PER_LONG - 8 too many.

Fix this by subtracting

  count_leading_zeros(...) - (BITS_PER_LONG - 8)

from nbits only.

Fixes: e104599294 ("MPILIB: Provide a function to read raw data into an
                     MPI")
Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-05-31 16:41:59 +08:00
Nicolai Stange dfd9051067 lib/mpi: mpi_read_raw_data(): purge redundant clearing of nbits
In mpi_read_raw_data(), unsigned nbits is calculated as follows:

 nbits = nbytes * 8;

and redundantly cleared later on if nbytes == 0:

  if (nbytes > 0)
    ...
  else
    nbits = 0;

Purge this redundant clearing for the sake of clarity.

Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-05-31 16:41:58 +08:00
Nicolai Stange 4bdf1cfca5 lib/mpi: purge mpi_set_buffer()
mpi_set_buffer() has no in-tree users and similar functionality is provided
by mpi_read_raw_data().

Remove mpi_set_buffer().

Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-05-31 16:41:58 +08:00
Nicolai Stange 0bb5c9ead6 lib/mpi: mpi_read_raw_from_sgl(): fix out-of-bounds buffer access
Within the copying loop in mpi_read_raw_from_sgl(), the last input SGE's
byte count gets artificially extended as follows:

  if (sg_is_last(sg) && (len % BYTES_PER_MPI_LIMB))
    len += BYTES_PER_MPI_LIMB - (len % BYTES_PER_MPI_LIMB);

Within the following byte copying loop, this causes reads beyond that
SGE's allocated buffer:

  BUG: KASAN: slab-out-of-bounds in mpi_read_raw_from_sgl+0x331/0x650
                                     at addr ffff8801e168d4d8
  Read of size 1 by task systemd-udevd/721
  [...]
  Call Trace:
   [<ffffffff818c4d35>] dump_stack+0xbc/0x117
   [<ffffffff818c4c79>] ? _atomic_dec_and_lock+0x169/0x169
   [<ffffffff814af5d1>] ? print_section+0x61/0xb0
   [<ffffffff814b1109>] print_trailer+0x179/0x2c0
   [<ffffffff814bc524>] object_err+0x34/0x40
   [<ffffffff814bfdc7>] kasan_report_error+0x307/0x8c0
   [<ffffffff814bf315>] ? kasan_unpoison_shadow+0x35/0x50
   [<ffffffff814bf38e>] ? kasan_kmalloc+0x5e/0x70
   [<ffffffff814c0ad1>] kasan_report+0x71/0xa0
   [<ffffffff81938171>] ? mpi_read_raw_from_sgl+0x331/0x650
   [<ffffffff814bf1a6>] __asan_load1+0x46/0x50
   [<ffffffff81938171>] mpi_read_raw_from_sgl+0x331/0x650
   [<ffffffff817f41b6>] rsa_verify+0x106/0x260
   [<ffffffff817f40b0>] ? rsa_set_pub_key+0xf0/0xf0
   [<ffffffff818edc79>] ? sg_init_table+0x29/0x50
   [<ffffffff817f4d22>] ? pkcs1pad_sg_set_buf+0xb2/0x2e0
   [<ffffffff817f5b74>] pkcs1pad_verify+0x1f4/0x2b0
   [<ffffffff81831057>] public_key_verify_signature+0x3a7/0x5e0
   [<ffffffff81830cb0>] ? public_key_describe+0x80/0x80
   [<ffffffff817830f0>] ? keyring_search_aux+0x150/0x150
   [<ffffffff818334a4>] ? x509_request_asymmetric_key+0x114/0x370
   [<ffffffff814b83f0>] ? kfree+0x220/0x370
   [<ffffffff818312c2>] public_key_verify_signature_2+0x32/0x50
   [<ffffffff81830b5c>] verify_signature+0x7c/0xb0
   [<ffffffff81835d0c>] pkcs7_validate_trust+0x42c/0x5f0
   [<ffffffff813c391a>] system_verify_data+0xca/0x170
   [<ffffffff813c3850>] ? top_trace_array+0x9b/0x9b
   [<ffffffff81510b29>] ? __vfs_read+0x279/0x3d0
   [<ffffffff8129372f>] mod_verify_sig+0x1ff/0x290
  [...]

The exact purpose of the len extension isn't clear to me, but due to
its form, I suspect that it's a leftover somehow accounting for leading
zero bytes within the most significant output limb.

Note however that without that len adjustement, the total number of bytes
ever processed by the inner loop equals nbytes and thus, the last output
limb gets written at this point. Thus the net effect of the len adjustement
cited above is just to keep the inner loop running for some more
iterations, namely < BYTES_PER_MPI_LIMB ones, reading some extra bytes from
beyond the last SGE's buffer and discarding them afterwards.

Fix this issue by purging the extension of len beyond the last input SGE's
buffer length.

Fixes: 2d4d1eea54 ("lib/mpi: Add mpi sgl helpers")
Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-04-05 20:35:51 +08:00
Nicolai Stange 85d541a3d1 lib/mpi: mpi_read_raw_from_sgl(): sanitize meaning of indices
Within the byte reading loop in mpi_read_raw_sgl(), there are two
housekeeping indices used, z and x.

At all times, the index z represents the number of output bytes covered
by the input SGEs for which processing has completed so far. This includes
any leading zero bytes within the most significant limb.

The index x changes its meaning after the first outer loop's iteration
though: while processing the first input SGE, it represents

  "number of leading zero bytes in most significant output limb" +
   "current position within current SGE"

For the remaining SGEs OTOH, x corresponds just to

  "current position within current SGE"

After all, it is only the sum of z and x that has any meaning for the
output buffer and thus, the

  "number of leading zero bytes in most significant output limb"

part can be moved away from x into z from the beginning, opening up the
opportunity for cleaner code.

Before the outer loop iterating over the SGEs, don't initialize z with
zero, but with the number of leading zero bytes in the most significant
output limb. For the inner loop iterating over a single SGE's bytes,
get rid of the buf_shift offset to x' bounds and let x run from zero to
sg->length - 1.

Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-04-05 20:35:51 +08:00
Nicolai Stange 64c09b0b59 lib/mpi: mpi_read_raw_from_sgl(): fix nbits calculation
The number of bits, nbits, is calculated in mpi_read_raw_from_sgl() as
follows:

  nbits = nbytes * 8;

Afterwards, the number of leading zero bits of the first byte get
subtracted:

  nbits -= count_leading_zeros(*(u8 *)(sg_virt(sgl) + lzeros));

However, count_leading_zeros() takes an unsigned long and thus,
the u8 gets promoted to an unsigned long.

Thus, the above doesn't subtract the number of leading zeros in the most
significant nonzero input byte from nbits, but the number of leading
zeros of the most significant nonzero input byte promoted to unsigned long,
i.e. BITS_PER_LONG - 8 too many.

Fix this by subtracting

  count_leading_zeros(...) - (BITS_PER_LONG - 8)

from nbits only.

Fixes: 2d4d1eea54 ("lib/mpi: Add mpi sgl helpers")
Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-04-05 20:35:51 +08:00
Nicolai Stange 60e1b74c22 lib/mpi: mpi_read_raw_from_sgl(): purge redundant clearing of nbits
In mpi_read_raw_from_sgl(), unsigned nbits is calculated as follows:

  nbits = nbytes * 8;

and redundantly cleared later on if nbytes == 0:

  if (nbytes > 0)
    ...
  else
    nbits = 0;

Purge this redundant clearing for the sake of clarity.

Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-04-05 20:35:51 +08:00
Nicolai Stange ab1e912ec1 lib/mpi: mpi_read_raw_from_sgl(): don't include leading zero SGEs in nbytes
At the very beginning of mpi_read_raw_from_sgl(), the leading zeros of
the input scatterlist are counted:

  lzeros = 0;
  for_each_sg(sgl, sg, ents, i) {
    ...
    if (/* sg contains nonzero bytes */)
      break;

    /* sg contains nothing but zeros here */
    ents--;
    lzeros = 0;
  }

Later on, the total number of trailing nonzero bytes is calculated by
subtracting the number of leading zero bytes from the total number of input
bytes:

  nbytes -= lzeros;

However, since lzeros gets reset to zero for each completely zero leading
sg in the loop above, it doesn't include those.

Besides wasting resources by allocating a too large output buffer,
this mistake propagates into the calculation of x, the number of
leading zeros within the most significant output limb:

  x = BYTES_PER_MPI_LIMB - nbytes % BYTES_PER_MPI_LIMB;

What's more, the low order bytes of the output, equal in number to the
extra bytes in nbytes, are left uninitialized.

Fix this by adjusting nbytes for each completely zero leading scatterlist
entry.

Fixes: 2d4d1eea54 ("lib/mpi: Add mpi sgl helpers")
Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-04-05 20:35:50 +08:00
Nicolai Stange b698538951 lib/mpi: mpi_read_raw_from_sgl(): replace len argument by nbytes
Currently, the nbytes local variable is calculated from the len argument
as follows:

  ... mpi_read_raw_from_sgl(..., unsigned int len)
  {
    unsigned nbytes;
    ...
    if (!ents)
      nbytes = 0;
    else
      nbytes = len - lzeros;
    ...
  }

Given that nbytes is derived from len in a trivial way and that the len
argument is shadowed by a local len variable in several loops, this is just
confusing.

Rename the len argument to nbytes and get rid of the nbytes local variable.
Do the nbytes calculation in place.

Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-04-05 20:35:49 +08:00
Nicolai Stange 462696fd0f lib/mpi: mpi_read_buffer(): fix buffer overflow
Currently, mpi_read_buffer() writes full limbs to the output buffer
and moves memory around to purge leading zero limbs afterwards.

However, with

  commit 9cbe21d8f8 ("lib/mpi: only require buffers as big as needed for
                        the integer")

the caller is only required to provide a buffer large enough to hold the
result without the leading zeros.

This might result in a buffer overflow for small MP numbers with leading
zeros.

Fix this by coping the result to its final destination within the output
buffer and not copying the leading zeros at all.

Fixes: 9cbe21d8f8 ("lib/mpi: only require buffers as big as needed for
                      the integer")
Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-04-05 20:35:49 +08:00
Nicolai Stange 90f864e200 lib/mpi: mpi_read_buffer(): replace open coded endian conversion
Currently, the endian conversion from CPU order to BE is open coded in
mpi_read_buffer().

Replace this by the centrally provided cpu_to_be*() macros.
Copy from the temporary storage on stack to the destination buffer
by means of memcpy().

Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-04-05 20:35:49 +08:00
Nicolai Stange f00fa2417b lib/mpi: mpi_read_buffer(): optimize skipping of leading zero limbs
Currently, if the number of leading zeros is greater than fits into a
complete limb, mpi_read_buffer() skips them by iterating over them
limb-wise.

Instead of skipping the high order zero limbs within the loop as shown
above, adjust the copying loop's bounds.

Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-04-05 20:35:49 +08:00
Nicolai Stange d755290689 lib/mpi: mpi_write_sgl(): replace open coded endian conversion
Currently, the endian conversion from CPU order to BE is open coded in
mpi_write_sgl().

Replace this by the centrally provided cpu_to_be*() macros.

Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-04-05 20:35:48 +08:00
Nicolai Stange cece762f6f lib/mpi: mpi_write_sgl(): fix out-of-bounds stack access
Within the copying loop in mpi_write_sgl(), we have

  if (lzeros) {
    mpi_limb_t *limb1 = (void *)p - sizeof(alimb);
    mpi_limb_t *limb2 = (void *)p - sizeof(alimb)
                               + lzeros;
    *limb1 = *limb2;
    ...
  }

where p points past the end of alimb2 which lives on the stack and contains
the current limb in BE order.

The purpose of the above is to shift the non-zero bytes of alimb2 to its
beginning in memory, i.e. to skip its leading zero bytes.

However, limb2 points somewhere into the middle of alimb2 and thus, reading
*limb2 pulls in lzero bytes from somewhere.

Indeed, KASAN splats:

  BUG: KASAN: stack-out-of-bounds in mpi_write_to_sgl+0x4e3/0x6f0
                                      at addr ffff8800cb04f601
  Read of size 8 by task systemd-udevd/391
  page:ffffea00032c13c0 count:0 mapcount:0 mapping:   (null) index:0x0
  flags: 0x3fff8000000000()
  page dumped because: kasan: bad access detected
  CPU: 3 PID: 391 Comm: systemd-udevd Tainted: G  B  L
                                              4.5.0-next-20160316+ #12
  [...]
  Call Trace:
   [<ffffffff8194889e>] dump_stack+0xdc/0x15e
   [<ffffffff819487c2>] ? _atomic_dec_and_lock+0xa2/0xa2
   [<ffffffff814892b5>] ? __dump_page+0x185/0x330
   [<ffffffff8150ffd6>] kasan_report_error+0x5e6/0x8b0
   [<ffffffff814724cd>] ? kzfree+0x2d/0x40
   [<ffffffff819c5bce>] ? mpi_free_limb_space+0xe/0x20
   [<ffffffff819c469e>] ? mpi_powm+0x37e/0x16f0
   [<ffffffff815109f1>] kasan_report+0x71/0xa0
   [<ffffffff819c0353>] ? mpi_write_to_sgl+0x4e3/0x6f0
   [<ffffffff8150ed34>] __asan_load8+0x64/0x70
   [<ffffffff819c0353>] mpi_write_to_sgl+0x4e3/0x6f0
   [<ffffffff819bfe70>] ? mpi_set_buffer+0x620/0x620
   [<ffffffff819c0e6f>] ? mpi_cmp+0xbf/0x180
   [<ffffffff8186e282>] rsa_verify+0x202/0x260

What's more, since lzeros can be anything from 1 to sizeof(mpi_limb_t)-1,
the above will cause unaligned accesses which is bad on non-x86 archs.

Fix the issue, by preparing the starting point p for the upcoming copy
operation instead of shifting the source memory, i.e. alimb2.

Fixes: 2d4d1eea54 ("lib/mpi: Add mpi sgl helpers")
Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-04-05 20:35:48 +08:00
Nicolai Stange ea122be0b8 lib/mpi: mpi_write_sgl(): purge redundant pointer arithmetic
Within the copying loop in mpi_write_sgl(), we have

  if (lzeros) {
    ...
    p -= lzeros;
    y = lzeros;
  }
  p = p - (sizeof(alimb) - y);

If lzeros == 0, then y == 0, too. Thus, lzeros gets subtracted and added
back again to p.

Purge this redundancy.

Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-04-05 20:35:48 +08:00
Nicolai Stange 654842ef53 lib/mpi: mpi_write_sgl(): fix style issue with lzero decrement
Within the copying loop in mpi_write_sgl(), we have

  if (lzeros > 0) {
    ...
    lzeros -= sizeof(alimb);
  }

However, at this point, lzeros < sizeof(alimb) holds. Make this fact
explicit by rewriting the above to

  if (lzeros) {
    ...
    lzeros = 0;
  }

Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-04-05 20:35:46 +08:00
Nicolai Stange f2d1362ff7 lib/mpi: mpi_write_sgl(): fix skipping of leading zero limbs
Currently, if the number of leading zeros is greater than fits into a
complete limb, mpi_write_sgl() skips them by iterating over them limb-wise.

However, it fails to adjust its internal leading zeros tracking variable,
lzeros, accordingly: it does a

  p -= sizeof(alimb);
  continue;

which should really have been a

  lzeros -= sizeof(alimb);
  continue;

Since lzeros never decreases if its initial value >= sizeof(alimb), nothing
gets copied by mpi_write_sgl() in that case.

Instead of skipping the high order zero limbs within the loop as shown
above, fix the issue by adjusting the copying loop's bounds.

Fixes: 2d4d1eea54 ("lib/mpi: Add mpi sgl helpers")
Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-04-05 20:35:46 +08:00
Michal Marek 3ee0cb5fb5 lib/mpi: Endianness fix
The limbs are integers in the host endianness, so we can't simply
iterate over the individual bytes. The current code happens to work on
little-endian, because the order of the limbs in the MPI array is the
same as the order of the bytes in each limb, but it breaks on
big-endian.

Fixes: 0f74fbf77d ("MPI: Fix mpi_read_buffer")
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-02-28 03:26:30 +08:00
Andrzej Zaborowski 9cbe21d8f8 lib/mpi: only require buffers as big as needed for the integer
Since mpi_write_to_sgl and mpi_read_buffer explicitly left-align the
integers being written it makes no sense to require a buffer big enough for
the number + the leading zero bytes which are not written.  The error
returned also doesn't convey any information.  So instead require only the
size needed and return -EOVERFLOW to signal when buffer too short.

Signed-off-by: Andrew Zaborowski <andrew.zaborowski@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-11-17 22:00:39 +08:00
Linus Torvalds 9cf5c095b6 asm-generic cleanups
The asm-generic changes for 4.4 are mostly a series from Christoph Hellwig
 to clean up various abuses of headers in there. The patch to rename the
 io-64-nonatomic-*.h headers caused some conflicts with new users, so I
 added a workaround that we can remove in the next merge window.
 
 The only other patch is a warning fix from Marek Vasut
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAVjzaf2CrR//JCVInAQImmhAA20fZ91sUlnA5skKNPT1phhF6Z7UF2Sx5
 nPKcHQD3HA3lT1OKfPBYvCo+loYflvXFLaQThVylVcnE/8ecAEMtft4nnGW2nXvh
 sZqHIZ8fszTB53cynAZKTjdobD1wu33Rq7XRzg0ugn1mdxFkOzCHW/xDRvWRR5TL
 rdQjzzgvn2PNlqFfHlh6cZ5ykShM36AIKs3WGA0H0Y/aYsE9GmDOAUp41q1mLXnA
 4lKQaIxoeOa+kmlsUB0wEHUecWWWJH4GAP+CtdKzTX9v12bGNhmiKUMCETG78BT3
 uL8irSqaViNwSAS9tBxSpqvmVUsa5aCA5M3MYiO+fH9ifd7wbR65g/wq39D3Pc01
 KnZ3BNVRW5XSA3c86pr8vbg/HOynUXK8TN0lzt6rEk8bjoPBNEDy5YWzy0t6reVe
 wX65F+ver8upjOKe9yl2Jsg+5Kcmy79GyYjLUY3TU2mZ+dIdScy/jIWatXe/OTKZ
 iB4Ctc4MDe9GDECmlPOWf98AXqsBUuKQiWKCN/OPxLtFOeWBvi4IzvFuO8QvnL9p
 jZcRDmIlIWAcDX/2wMnLjV+Hqi3EeReIrYznxTGnO7HHVInF555GP51vFaG5k+SN
 smJQAB0/sostmC1OCCqBKq5b6/li95/No7+0v0SUhJJ5o76AR5CcNsnolXesw1fu
 vTUkB/I66Hk=
 =dQKG
 -----END PGP SIGNATURE-----

Merge tag 'asm-generic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pull asm-generic cleanups from Arnd Bergmann:
 "The asm-generic changes for 4.4 are mostly a series from Christoph
  Hellwig to clean up various abuses of headers in there.  The patch to
  rename the io-64-nonatomic-*.h headers caused some conflicts with new
  users, so I added a workaround that we can remove in the next merge
  window.

  The only other patch is a warning fix from Marek Vasut"

* tag 'asm-generic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  asm-generic: temporarily add back asm-generic/io-64-nonatomic*.h
  asm-generic: cmpxchg: avoid warnings from macro-ized cmpxchg() implementations
  gpio-mxc: stop including <asm-generic/bug>
  n_tracesink: stop including <asm-generic/bug>
  n_tracerouter: stop including <asm-generic/bug>
  mlx5: stop including <asm-generic/kmap_types.h>
  hifn_795x: stop including <asm-generic/kmap_types.h>
  drbd: stop including <asm-generic/kmap_types.h>
  move count_zeroes.h out of asm-generic
  move io-64-nonatomic*.h out of asm-generic
2015-11-06 14:22:15 -08:00
Stephan Mueller 63349d02c1 lib/mpi: fix off by one in mpi_read_raw_from_sgl
The patch fixes the analysis of the input data which contains an off
by one.

The issue is visible when the SGL contains one byte per SG entry.
The code for checking for zero bytes does not operate on the data byte.

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-10-20 22:10:47 +08:00
Christoph Hellwig a1164a3ac7 move count_zeroes.h out of asm-generic
This header contains a few helpers currenly only used by the mpi
implementation, and not default implementation of architecture code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-10-15 00:21:07 +02:00
Tadeusz Struk 2d4d1eea54 lib/mpi: Add mpi sgl helpers
Add mpi_read_raw_from_sgl and mpi_write_to_sgl helpers.

Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-10-14 22:23:00 +08:00
Tadeusz Struk 0f74fbf77d MPI: Fix mpi_read_buffer
Change mpi_read_buffer to return a number without leading zeros
so that mpi_read_buffer and mpi_get_buffer return the same thing.

Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-25 21:13:16 +08:00
Tadeusz Struk d37e296979 MPILIB: add mpi_read_buf() and mpi_get_size() helpers
Added a mpi_read_buf() helper function to export MPI to a buf provided by
the user, and a mpi_get_size() helper, that tells the user how big the buf is.
Changed mpi_free to use kzfree instead of kfree because it is used to free
crypto keys.

Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-16 14:35:06 +08:00
Chen Gang 5402b8047b lib/mpi/mpicoder.c: looping issue, need stop when equal to zero, found by 'EXTRA_FLAGS=-W'.
For 'while' looping, need stop when 'nbytes == 0', or will cause issue.
('nbytes' is size_t which is always bigger or equal than zero).

The related warning: (with EXTRA_CFLAGS=-W)

  lib/mpi/mpicoder.c:40:2: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits]

Signed-off-by: Chen Gang <gang.chen@asianux.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: David Howells <dhowells@redhat.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-06-12 16:29:44 -07:00
Andy Shevchenko 0d2a1b2d03 mpilib: use DIV_ROUND_UP and remove unused macros
Remove MIN, MAX and ABS macros that are duplicates kernel's native
implementation.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2013-02-01 16:28:32 +11:00
David Howells e104599294 MPILIB: Provide a function to read raw data into an MPI
Provide a function to read raw data of a predetermined size into an MPI rather
than expecting the size to be encoded within the data.  The data is assumed to
represent an unsigned integer, and the resulting MPI will be positive.

The function looks like this:

	MPI mpi_read_raw_data(const void *, size_t);

This is useful for reading ASN.1 integer primitives where the length is encoded
in the ASN.1 metadata.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-10-08 13:50:21 +10:30
Dmitry Kasatkin 7cf4206a99 Remove unused code from MPI library
MPI library is used by RSA verification implementation.
Few files contains functions which are never called.

James Morris has asked to remove all of them.

Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Requested-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-05-26 11:51:03 +10:00
Dmitry Kasatkin bc95eeadf5 lib/mpi: removed unused functions
do_encode_md() and mpi_get_keyid() are not parts of mpi library.
They were used early versions of gnupg and in digsig project,
but they are not used neither here nor there anymore.

Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Reviewed-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: James Morris <jmorris@namei.org>
2012-02-02 00:23:14 +11:00
Dmitry Kasatkin 3cccd1543a lib/mpi: replaced MPI_NULL with normal NULL
MPI_NULL is replaced with normal NULL.

Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Reviewed-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: James Morris <jmorris@namei.org>
2012-02-02 00:23:14 +11:00
Dmitry Kasatkin c70c471c58 lib/mpi: added missing NULL check
Added missing NULL check after mpi_alloc().

Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Reviewed-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: James Morris <jmorris@namei.org>
2012-02-02 00:23:13 +11:00
David Howells 4bf1924c00 MPILIB: Add a missing ENOMEM check
Add a missing ENOMEM check.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
2012-01-19 13:45:51 +11:00
Dmitry Kasatkin cdec9cb516 crypto: GnuPG based MPI lib - source files (part 1)
Adds the multi-precision-integer maths library which was originally taken
from GnuPG and ported to the kernel by (among others) David Howells.
This version is taken from Fedora kernel 2.6.32-71.14.1.el6.
The difference is that checkpatch reported errors and warnings have been fixed.

This library is used to implemenet RSA digital signature verification
used in IMA/EVM integrity protection subsystem.

Due to patch size limitation, the patch is divided into 4 parts.

Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
2011-11-09 11:45:22 +02:00