Normally delayed refs get processed in ascending bytenr order. This
correlates in most cases to the order added. To expose dependencies
on this order, we start to process the tree in the middle instead of
the beginning.
This code is only effective when SCRAMBLE_DELAYED_REFS is defined.
Signed-off-by: Arne Jansen <sensille@gmx.net>
This patch only add a consistancy check to validate that the
same root is passed to start_transaction and end_transaction.
Subvolume quota depends on this.
Signed-off-by: Arne Jansen <sensille@gmx.net>
Often no exact match is wanted but just the next lower or
higher item. There's a lot of duplicated code throughout
btrfs to deal with the corner cases. This patch adds a
helper function that can facilitate searching.
Signed-off-by: Arne Jansen <sensille@gmx.net>
We've got two mechanisms both required for reliable backref resolving (tree
mod log and holding back delayed refs). You cannot make use of one without
the other. So instead of requiring the user of this mechanism to setup both
correctly, we join them into a single interface.
Additionally, we stop inserting non-blockers into fs_info->tree_mod_seq_list
as we did before, which was of no value.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
When calling btrfs_next_old_leaf, we were leaking an extent buffer in the
rare case of using the deadlock avoidance code needed for the tree mod log.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Pull btrfs updates from Chris Mason:
"I held off on my rc5 pull because I hit an oops during log recovery
after a crash. I wanted to make sure it wasn't a regression because
we have some logging fixes in here.
It turns out that a commit during the merge window just made it much
more likely to trigger directory logging instead of full commits,
which exposed an old bug.
The new backref walking code got some additional fixes. This should
be the final set of them.
Josef fixed up a corner where our O_DIRECT writes and buffered reads
could expose old file contents (not stale, just not the most recent).
He and Liu Bo fixed crashes during tree log recover as well.
Ilya fixed errors while we resume disk balancing operations on
readonly mounts."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: run delayed directory updates during log replay
Btrfs: hold a ref on the inode during writepages
Btrfs: fix tree log remove space corner case
Btrfs: fix wrong check during log recovery
Btrfs: use _IOR for BTRFS_IOC_SUBVOL_GETFLAGS
Btrfs: resume balance on rw (re)mounts properly
Btrfs: restore restriper state on all mounts
Btrfs: fix dio write vs buffered read race
Btrfs: don't count I/O statistic read errors for missing devices
Btrfs: resolve tree mod log locking issue in btrfs_next_leaf
Btrfs: fix tree mod log rewind of ADD operations
Btrfs: leave critical region in btrfs_find_all_roots as soon as possible
Btrfs: always put insert_ptr modifications into the tree mod log
Btrfs: fix tree mod log for root replacements at leaf level
Btrfs: support root level changes in __resolve_indirect_ref
Btrfs: avoid waiting for delayed refs when we must not
While we are resolving directory modifications in the
tree log, we are triggering delayed metadata updates to
the filesystem btrees.
This commit forces the delayed updates to run so the
replay code can find any modifications done. It stops
us from crashing because the directory deleltion replay
expects items to be removed immediately from the tree.
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
cc: stable@kernel.org
We can race with unlink and not actually be able to do our igrab in
btrfs_add_ordered_extent. This will result in all sorts of problems.
Instead of doing the complicated work to try and handle returning an error
properly from btrfs_add_ordered_extent, just hold a ref to the inode during
writepages. If we cannot grab a ref we know we're freeing this inode anyway
and can just drop the dirty pages on the floor, because screw them we're
going to invalidate them anyway. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
The tree log stuff can have allocated space that we end up having split
across a bitmap and a real extent. The free space code does not deal with
this, it assumes that if it finds an extent or bitmap entry that the entire
range must fall within the entry it finds. This isn't necessarily the case,
so rework the remove function so it can handle this case properly. This
fixed two panics the user hit, first in the case where the space was
initially in a bitmap and then in an extent entry, and then the reverse
case. Thanks,
Reported-and-tested-by: Shaun Reich <sreich@kde.org>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
When we're evicting an inode during log recovery, we need to ensure that the inode
is not in orphan state any more, which means inode's run_time flags has _no_
BTRFS_INODE_HAS_ORPHAN_ITEM. Thus, the BUG_ON was triggered because of a wrong
check for the flags.
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
We used the wrong ioctl macro for the getflags ioctl before.
As we don't have the set/getflags ioctls in the user space ioctl.h
at the moment, it's safe to fix it now.
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Alexander Block <ablock84@googlemail.com>
This introduces btrfs_resume_balance_async(), which, given that
restriper state was recovered earlier by btrfs_recover_balance(),
resumes balance in btrfs-balance kthread.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Fix a bug that triggered asserts in btrfs_balance() in both normal and
resume modes -- restriper state was not properly restored on read-only
mounts. This factors out resuming code from btrfs_restore_balance(),
which is now also called earlier in the mount sequence to avoid the
problem of some early writes getting the old profile.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Miao pointed out there's a problem with mixing dio writes and buffered
reads. If the read happens between us invalidating the page range and
actually locking the extent we can bring in pages into page cache. Then
once the write finishes if somebody tries to read again it will just find
uptodate pages and we'll read stale data. So we need to lock the extent and
check for uptodate bits in the range. If there are uptodate bits we need to
unlock and invalidate again. This will keep this race from happening since
we will hold the extent locked until we create the ordered extent, and then
teh read side always waits for ordered extents. There was also a race in
how we updated i_size, previously we were relying on the generic DIO stuff
to adjust the i_size after the DIO had completed, but this happens outside
of the extent lock which means reads could come in and not see the updated
i_size. So instead move this work into where we create the extents, and
then this way the update ordered i_size stuff works properly in the endio
handlers. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
It is normal behaviour of the low level btrfs function btrfs_map_bio()
to complete a bio with -EIO if the device is missing, instead of just
preventing the bio creation in an earlier step.
This used to cause I/O statistic read error increments and annoying
printk_ratelimited messages. This commit fixes the issue.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Reported-by: Carey Underwood <cwillu@cwillu.com>
With the tree mod log, we may end up with two roots (the current root and a
rewinded version of it) both pointing to two leaves, l1 and l2, of which l2
had already been cow-ed in the current transaction. If we don't rewind any
tree blocks, we cannot have two roots both pointing to an already cowed tree
block.
Now there is btrfs_next_leaf, which has a leaf locked and wants a lock on
the next (right) leaf. And there is push_leaf_left, which has a (cowed!)
leaf locked and wants a lock on the previous (left) leaf.
In order to solve this dead lock situation, we use try_lock in
btrfs_next_leaf (only in case it's called with a tree mod log time_seq
paramter) and if we fail to get a lock on the next leaf, we give up our lock
on the current leaf and retry from the very beginning.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
When a MOD_LOG_KEY_ADD operation is rewinded, we remove the key from the
tree block. If its not the last key, removal involves a move operation.
This move operation was explicitly done before this commit.
However, at insertion time, there's a move operation before the actual
addition to make room for the new key, which is recorded in the tree mod
log as well. This means, we must drop the move operation when rewinding the
add operation, because the next operation we'll be rewinding will be the
corresponding MOD_LOG_MOVE_KEYS operation.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
When delayed refs exist, btrfs_find_all_roots used to hold the delayed ref
mutex way longer than actually required. We ought to drop it immediately
after we're done collecting all the delayed refs.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Several callers of insert_ptr set the tree_mod_log parameter to 0 to avoid
addition to the tree mod log. In fact, we need all of those operations. This
commit simply removes the additional parameter and makes addition to the
tree mod log unconditional.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
For the tree mod log, we don't log any operations at leaf level. If the root
is at the leaf level (i.e. the tree consists only of the root), then
__tree_mod_log_oldest_root will find a ROOT_REPLACE operation in the log
(because we always log that one no matter which level), but no other
operations.
With this patch __tree_mod_log_oldest_root exits cleanly instead of
BUGging in this situation. get_old_root checks if its really a root at leaf
level in case we don't have any operations and WARNs if this assumption
breaks.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
With the tree mod log, we can have a tree that's two levels high, but
btrfs_search_old_slot may still return a path with the tree root at level
one instead. __resolve_indirect_ref must care for this and accept parents in
a lower level than expected.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
We track two conditions to decide if we should sleep while waiting for more
delayed refs, the number of delayed refs (num_refs) and the first entry in
the list of blockers (first_seq).
When we suspect staleness, we save num_refs and do one more cycle. If
nothing changes, we then save first_seq for later comparison and do
wait_event. We ought to save first_seq the very same moment we're saving
num_refs. Otherwise we cannot be sure that nothing has changed and we might
start waiting when we shouldn't, which could lead to starvation.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Pull btrfs fixes from Chris Mason:
"This is a small pull with btrfs fixes. The biggest of the bunch is
another fix for the new backref walking code.
We're still hammering out one btrfs dio vs buffered reads problem, but
that one will have to wait for the next rc."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: delay iput with async extents
Btrfs: add a missing spin_lock
Btrfs: don't assume to be on the correct extent in add_all_parents
Btrfs: introduce btrfs_next_old_item
There is some concern that these iput()'s could be the final iputs and could
induce lockups on people waiting on writeback. This would happen in the
rare case that we don't create ordered extents because of an error, but it
is theoretically possible and we already have a mechanism to deal with this
so just make them delayed iputs to negate any worry.
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
When fixing up the locking in the delayed ref destruction work I accidently
broke the locking myself ;(. Add back a spin_lock that should be there and
we are now all set. Thanks,
Btrfs: add a missing spin_lock
When fixing up the locking in the delayed ref destruction work I accidently
broke the locking myself ;(. Add back a spin_lock that should be there and
we are now all set. Thanks,
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
add_all_parents did assume that path is already at a correct extent data
item, which may not be true in case of data extents that were partly
rewritten and splitted.
We need to check if we're on a matching extent for every item and only
for the ones after the first. The loop is changed to do this now.
This patch also fixes a bug introduced with commit 3b127fd8 "Btrfs:
remove obsolete btrfs_next_leaf call from __resolve_indirect_ref".
The removal of next_leaf did sometimes result in slot==nritems when
the above described case happens, and thus resulting in invalid values
(e.g. wanted_obejctid) in add_all_parents (leading to missed backrefs
or even crashes).
Signed-off-by: Alexander Block <ablock84@googlemail.com>
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
We introduce btrfs_next_old_item that uses btrfs_next_old_leaf instead
of btrfs_next_leaf.
btrfs_next_item is also changed to simply call btrfs_next_old_item with
time_seq being 0.
Signed-off-by: Alexander Block <ablock84@googlemail.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Pull btrfs compile warning fixes from Chris Mason.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: cast devid to unsigned long long for printk %llu
Btrfs: init old_generation in get_old_root
gcc was giving an uninit variable warning here. Strictly
speaking we don't need to init it, but this will make things
much less error prone.
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Pull btrfs update from Chris Mason:
"The dates look like I had to rebase this morning because there was a
compiler warning for a printk arg that I had missed earlier.
These are all fixes, including one to prevent using stale pointers for
device names, and lots of fixes around transaction abort cleanups
(Josef, Liu Bo).
Jan Schmidt also sent in a number of fixes for the new reference
number tracking code.
Liu Bo beat me to updating the MAINTAINERS file. Since he thought to
also fix the git url, I kept his commit."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (24 commits)
Btrfs: update MAINTAINERS info for BTRFS FILE SYSTEM
Btrfs: destroy the items of the delayed inodes in error handling routine
Btrfs: make sure that we've made everything in pinned tree clean
Btrfs: avoid memory leak of extent state in error handling routine
Btrfs: do not resize a seeding device
Btrfs: fix missing inherited flag in rename
Btrfs: fix incompat flags setting
Btrfs: fix defrag regression
Btrfs: call filemap_fdatawrite twice for compression
Btrfs: keep inode pinned when compressing writes
Btrfs: implement ->show_devname
Btrfs: use rcu to protect device->name
Btrfs: unlock everything properly in the error case for nocow
Btrfs: fix btrfs_destroy_marked_extents
Btrfs: abort the transaction if the commit fails
Btrfs: wake up transaction waiters when aborting a transaction
Btrfs: fix locking in btrfs_destroy_delayed_refs
Btrfs: pass locked_page into extent_clear_unlock_delalloc if theres an error
Btrfs: fix race in tree mod log addition
Btrfs: add btrfs_next_old_leaf
...
the items of the delayed inodes were forgotten to be freed, this patch
fixes it.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Since we have two trees for recording pinned extents, we need to go through
both of them to make sure that we've done everything clean.
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
We've forgotten to clear extent states in pinned tree, which will results in
space counter mismatch and memory leak:
WARNING: at fs/btrfs/extent-tree.c:7537 btrfs_free_block_groups+0x1f3/0x2e0 [btrfs]()
...
space_info 2 has 8380416 free, is not full
space_info total=12582912, used=4096, pinned=4096, reserved=0, may_use=0, readonly=4194304
btrfs state leak: start 29364224 end 29376511 state 1 in tree ffff880075f20090 refs 1
...
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Seeding devices are not supposed to change any more.
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
When we move a file into a directory with compression flag, we need to
inherite BTRFS_INODE_COMPRESS and clear BTRFS_INODE_NOCOMPRESS as well.
But if we move a file into a directory without compression flag, we need
to clear both of them.
It is the way how our setflags deals with compression flag, so keep
the same behaviour here.
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
If a file has 3 small extents:
| ext1 | ext2 | ext3 |
Running "btrfs fi defrag" will only defrag the last two extents, if those
extent mappings hasn't been read into memory from disk.
This bug was introduced by commit 17ce6ef8d7
("Btrfs: add a check to decide if we should defrag the range")
The cause is, that commit looked into previous and next extents using
lookup_extent_mapping() only.
While at it, remove the code that checks the previous extent, since
it's sufficient to check the next extent.
Signed-off-by: Li Zefan <lizefan@huawei.com>
I removed this in an earlier commit and I was wrong. Because compression
can return from filemap_fdatawrite() without having actually set any of it's
pages as writeback() it can make filemap_fdatawait() do essentially nothing,
and then we won't find any ordered extents because they may not have been
created yet. So not only does this make fsync() completely useless, but it
will also screw up if you truncate on a non-page aligned offset since we
zero out the end and then wait on ordered extents and then call drop caches.
We can drop the cache before the io completes and then we try to unpin the
extent we just wrote we won't find it and everything goes sideways. So fix
this by putting it back and put a giant comment there to keep me from trying
to remove it in the future. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
A user reported lots of problems using compression on the new code and it
turns out part of the problem was that igrab() was failing when we added a
new ordered extent. This is because when writing out an inode under
compression we immediately return without actually doing anything to the
pages, and then in another thread at some point down the line actually do
the ordered dance. The problem is between the point that we start writeback
and we actually add the ordered extent we could be trying to reclaim the
inode, which makes igrab() return NULL. So we need to do an igrab() when we
create the async extent and then drop it when we are done with it. This
makes sure we stay pinned in memory until the ordered extent can get a
reference on it and we are good to go. With this patch we no longer panic
in btrfs_finish_ordered_io(). Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Because btrfs can remove the device that was mounted we need to have a
->show_devname so that in this case we can print out some other device in
the file system to /proc/mount. So if there are multiple devices in a btrfs
file system we will just print the device with the lowest devid that we can
find. This will make everything consistent and deal with device removal
properly. The drawback is if you mount with a device that is higher than
the lowest devicd it won't show up as the mounted device in /proc/mounts,
but this is a small price to pay. This was inspired by Miao Xie's patch.
Thanks,
Reviewed-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <josef@redhat.com>
Al pointed out that we can just toss out the old name on a device and add a
new one arbitrarily, so anybody who uses device->name in printk could
possibly use free'd memory. Instead of adding locking around all of this he
suggested doing it with RCU, so I've introduced a struct rcu_string that
does just that and have gone through and protected all accesses to
device->name that aren't under the uuid_mutex with rcu_read_lock(). This
protects us and I will use it for dealing with removing the device that we
used to mount the file system in a later patch. Thanks,
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <josef@redhat.com>
I was getting hung on umount when a transaction was aborted because a range
of one of the free space inodes was still locked. This is because the nocow
stuff doesn't unlock anything on error. This fixed the problem and I
verified that is what was happening. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
So we're forcing the eb's to have their ref count set to 1 so invalidatepage
works but this breaks lots of things, for example root nodes, and is just
plain wrong, we don't need to just evict all of this stuff. Also drop the
invalidatepage altogether and add a page_cache_release(). With this patch
we no longer hang when trying to access the root nodes after an aborted
transaction and we no longer leak memory. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
If a transaction commit fails we don't abort it so we don't set an error on
the file system. This patch fixes that by actually calling the abort stuff
and then adding a check for a fs error in the transaction start stuff to
make sure it is caught properly. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
I was getting lots of hung tasks and a NULL pointer dereference because we
are not cleaning up the transaction properly when it aborts. First we need
to reset the running_transaction to NULL so we don't get a bad dereference
for any start_transaction callers after this. Also we cannot rely on
waitqueue_active() since it's just a list_empty(), so just call wake_up()
directly since that will do the barrier for us and such. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
The transaction abort stuff was throwing warnings from the list debugging
code because we do a list_del_init outside of the delayed_refs spin lock.
The delayed refs locking makes baby Jesus cry so it's not hard to get wrong,
but we need to take the ref head mutex to make sure it's not being processed
currently, and so if it is we need to drop the spin lock and then take and
drop the mutex and do the search again. If we can take the mutex then we
can safely remove the head from the list and carry on. Now when the
transaction aborts I don't get the list debugging warnings. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
While doing my enospc work I got a transaction abortion that resulted in a
panic when we tried to unlock_page() an already unlocked page. This is
because we aren't calling extent_clear_unlock_delalloc with the locked page
so it was unlocking all the pages in the range. This is wrong since
__extent_writepage expects to have the page locked still unless we return
*page_started as 1. This should keep us from panicing. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
When adding to the tree modification log, we grab two locks at different
stages. We must not drop the outer lock until we're done with section
protected by the inner lock. This moves the unlock call for the outer lock
to the appropriate position.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
To make sense of the tree mod log, the backref walker not only needs
btrfs_search_old_slot, but it also called btrfs_next_leaf, which in turn was
calling btrfs_search_slot. This obviously didn't give the correct result.
This commit adds btrfs_next_old_leaf, a drop-in replacement for
btrfs_next_leaf with a time_seq parameter. If it is zero, it behaves exactly
like btrfs_next_leaf. If it is non-zero, it will use btrfs_search_old_slot
with this time_seq parameter.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
In __tree_mod_log_oldest_root() we must return the found operation even if
it's not a ROOT_REPLACE operation. Otherwise, the caller assumes that there
are no operations to be rewinded and returns immediately.
The code in the caller is modified to improve readability.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
get_old_root could race with root node updates because we weren't locking
the node early enough. Use btrfs_read_lock_root_node to grab the root locked
in the very beginning and release the lock as soon as possible (just like
btrfs_search_slot does).
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
When resolving indirect refs, we used to call btrfs_next_leaf in case we
didn't find an exact match. While we should find exact matches most of the
time, in case we don't, we must continue searching. Treating those matches
differently depending on the level we're searching doesn't make sense.
Even worse, we might end up searching for a key larger than the largest, in
which case there is no next_leaf and subsequent jobs would fail. This commit
drops the bogous lines.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
This is a leftover from cleanup patch 559af821. Before the cleanup,
btrfs_header_nritems was called inside an if condition. As it has no side
effects we need to preserve here, it should simply be dropped.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Pull vfs changes from Al Viro.
"A lot of misc stuff. The obvious groups:
* Miklos' atomic_open series; kills the damn abuse of
->d_revalidate() by NFS, which was the major stumbling block for
all work in that area.
* ripping security_file_mmap() and dealing with deadlocks in the
area; sanitizing the neighborhood of vm_mmap()/vm_munmap() in
general.
* ->encode_fh() switched to saner API; insane fake dentry in
mm/cleancache.c gone.
* assorted annotations in fs (endianness, __user)
* parts of Artem's ->s_dirty work (jff2 and reiserfs parts)
* ->update_time() work from Josef.
* other bits and pieces all over the place.
Normally it would've been in two or three pull requests, but
signal.git stuff had eaten a lot of time during this cycle ;-/"
Fix up trivial conflicts in Documentation/filesystems/vfs.txt (the
'truncate_range' inode method was removed by the VM changes, the VFS
update adds an 'update_time()' method), and in fs/btrfs/ulist.[ch] (due
to sparse fix added twice, with other changes nearby).
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (95 commits)
nfs: don't open in ->d_revalidate
vfs: retry last component if opening stale dentry
vfs: nameidata_to_filp(): don't throw away file on error
vfs: nameidata_to_filp(): inline __dentry_open()
vfs: do_dentry_open(): don't put filp
vfs: split __dentry_open()
vfs: do_last() common post lookup
vfs: do_last(): add audit_inode before open
vfs: do_last(): only return EISDIR for O_CREAT
vfs: do_last(): check LOOKUP_DIRECTORY
vfs: do_last(): make ENOENT exit RCU safe
vfs: make follow_link check RCU safe
vfs: do_last(): use inode variable
vfs: do_last(): inline walk_component()
vfs: do_last(): make exit RCU safe
vfs: split do_lookup()
Btrfs: move over to use ->update_time
fs: introduce inode operation ->update_time
reiserfs: get rid of resierfs_sync_super
reiserfs: mark the superblock as dirty a bit later
...
Btrfs had been doing it's own file_update_time so we could catch ENOSPC
properly, so just update our btrfs_update_time to work with the new stuff and
then we'll be fancy later. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Pull btrfs updates from Chris Mason:
"This includes a fairly large change from Josef around data writeback
completion. Before, the writeback wasn't completed until the metadata
insertions for the extent were done, and this made for fairly large
latency spikes on the last page of each ordered extent.
We already had a separate mechanism for tracking pending metadata
insertions, so Josef just needed to tweak things a little to end
writeback earlier on the page. Overall it makes us much friendly to
memory reclaim and lowers latencies quite a lot for synchronous IO.
Jan Schmidt has finished some background work required to track btree
blocks as they go through changes in ownership. It's the missing
piece he needed for both btrfs send/receive and subvolume quotas.
Neither of those are ready yet, but the new tracking code is included
here. Most of the time, the new code is off. It is only used by
scrub and other backref walkers.
Stefan Behrens has added io failure tracking. This includes counters
for which drives are causing the most trouble so the admin (or an
automated tool) can choose to kick them out. We're tracking IO
errors, crc errors, and generation checks we do on each metadata
block.
RAID5/6 did miss the cut this time because I'm having trouble with
corruptions. I'll nail it down next week and post as a beta testing
before 3.6"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (58 commits)
Btrfs: fix tree mod log rewinded level and rewinding of moved keys
Btrfs: fix tree mod log del_ptr
Btrfs: add tree_mod_dont_log helper
Btrfs: add missing spin_lock for insertion into tree mod log
Btrfs: add inodes before dropping the extent lock in find_all_leafs
Btrfs: use delayed ref sequence numbers for all fs-tree updates
Btrfs: fix false positive in check-integrity on unmount
Btrfs: fix runtime warning in check-integrity check data mode
Btrfs: set ioprio of scrub readahead to idle
Btrfs: fix return code in drop_objectid_items
Btrfs: check to see if the inode is in the log before fsyncing
Btrfs: return value of btrfs_read_buffer is checked correctly
Btrfs: read device stats on mount, write modified ones during commit
Btrfs: add ioctl to get and reset the device stats
Btrfs: add device counters for detected IO and checksum errors
btrfs: Drop unused function btrfs_abort_devices()
Btrfs: fix the same inode id problem when doing auto defragment
Btrfs: fall back to non-inline if we don't have enough space
Btrfs: fix how we deal with the orphan block rsv
Btrfs: convert the inode bit field to use the actual bit operations
...
When we rewind REMOVE_WHILE_FREEING operations, there's code that allocates
a fresh buffer instead of cloning the old one. Setting that buffer's level
correctly was missing in this case.
When rewinding a MOVE_KEYS operation, btrfs_node_key_ptr_offset(slot) was
missing for memmove_extent_buffer()'s arguments.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Logging for del_ptr when we're not deleting the last pointer was wrong. This
fixes both, duplicate log entries and log sequence.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
We must build up the inode list with the extent lock held after following
indirect refs.
This also requires an extension to ulists, which allows to modify the stored
aux value in case a key already exists in the list.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
The sequence number for delayed refs is needed to postpone certain delayed
refs for a very short period while walking backrefs. Before the tree
modification log, we thought we'd only have to hold back those references
that don't have a counter operation.
While now we've the tree mod log, we're rewinding fs tree blocks to a
defined consistent state. We cannot know in advance for which tree block
we'll be doing rewind operations later. Therefore, we must postpone all the
delayed refs for fs-tree blocks, even those having a counter operation.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
During unmount, it could happen that the integrity checker printed a
warning message "attempt to free ... on umount which is not yet iodone"
which turned out to be a false positive.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
If a file_extent_item was located at the very end of a leaf and there was
not enough space to hold a full item, but there was enough space to hold
one of type BTRFS_FILE_EXTENT_INLINE or PREALLOC, and it was only such a
short item, a warning was printed anyway. This check is now fixed.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Reduce ioprio class of scrub readahead threads to idle priority.
This setting is fixed. This priority has shown the best performance
during all measurements.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
So dpkg fsync()'s the file and the directory containing the file whenever it
writes to a file which is really slow in btrfs. This is partly because
fsync()'ing a directory _always_ committed the transaction instead of just
going to the tree log. This is because drop_objectid_items() would return 1
since it does a btrfs_search_slot() which returns 1. In tree-log jargon
this means that we have to commit the transaction to be safe. So just check
if ret is greater than 0 and set it to 0 if it does. With this patch we now
use the tree-log instead of committing the entire transaction, which is
twice as fast on my box. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
We have this check down in the actual logging code, but this is after we
start a transaction and all that good stuff. So move the helper
inode_in_log() out so we can call it in fsync() and avoid starting a
transaction altogether and just exit if we've already fsync()'ed this file
recently. You would notice this issue if you fsync()'ed a file over and
over again until the transaction committed. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
btrfs_read_buffer() has the possibility of returning the error.
Therefore, I add the code in which the return value of btrfs_read_buffer()
is checked.
Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
The device statistics are written into the device tree with each
transaction commit. Only modified statistics are written.
When a filesystem is mounted, the device statistics for each involved
device are read from the device tree and used to initialize the
counters.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
An ioctl interface is added to get the device statistic counters.
A second ioctl is added to atomically get and reset these counters.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
The goal is to detect when drives start to get an increased error rate,
when drives should be replaced soon. Therefore statistic counters are
added that count IO errors (read, write and flush). Additionally, the
software detected errors like checksum errors and corrupted blocks are
counted.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
1) This function is not used anywhere.
2) Using the blk_abort_queue() to abort the queue seems not correct.
blk_abort_queue() is used for timeout handling (block/blk-timeout.c).
Cc: Chris Mason <chris.mason@oracle.com>
Cc: linux-btrfs@vger.kernel.org
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Asias He <asias@redhat.com>
Two files in the different subvolumes may have the same inode id, so
The rb-tree which is used to manage the defragment object must take it
into account. This patch fix this problem.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
If cow_file_range_inline fails with ENOSPC we abort the transaction which
isn't very nice. This really shouldn't be happening anyways but there's no
sense in making it a horrible error when we can easily just go allocate
normal data space for this stuff. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Ceph was hitting this race where we would remove an inode from the per-root
orphan list before we would release the space we had reserved for the inode.
We actually don't need a list or anything, we just need to make sure the
root doesn't try to free up the orphan reserve until after the inodes have
released their reservations. So use an atomic counter instead of a list on
the root and only decrement the counter after we've released our
reservation. I've tested this as well as several others and we no longer
see the warnings that you would see while running ceph. Thanks,
Btrfs: fix how we deal with the orphan block rsv
Ceph was hitting this race where we would remove an inode from the per-root
orphan list before we would release the space we had reserved for the inode.
We actually don't need a list or anything, we just need to make sure the
root doesn't try to free up the orphan reserve until after the inodes have
released their reservations. So use an atomic counter instead of a list on
the root and only decrement the counter after we've released our
reservation. I've tested this as well as several others and we no longer
see the warnings that you would see while running ceph. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Miao pointed this out while I was working on an orphan problem that messing
with a bitfield where different ranges are protected by different locks
doesn't work out right. Turns out we've been doing this forever where we
have different parts of the bit field protected by either no lock at all or
different locks which could cause all sorts of weird problems including the
issue I was hitting. So instead make a runtime_flags thing that we use the
normal bit operations on that are all atomic so we can keep having our
no/different locking for the different flags and then make force_compress
it's own thing so it can be treated normally. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
When we write out the free space cache we will write out everything that is
in our in memory tree, and then we will just walk the pinned extents tree
and write anything we see there. The problem with this is that during
normal operations the pinned extents will be merged back into the free space
tree normally, and then we can allocate space from the merged areas and
commit them to the tree log. If we crash and replay the tree log we will
crash again because the tree log will try to free up space from what looks
like 2 seperate but contiguous entries, since one entry is from the original
free space cache and the other was a pinned extent that was merged back. To
fix this we just need to walk the free space tree after we load it and merge
contiguous entries back together. This will keep the tree log stuff from
breaking and it will make the allocator behave more nicely. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
In normal cases, we would not be allowed to do balance in RO mode.
However, when we're using a seeding device and adding another device to sprout,
things will change:
$ mkfs.btrfs /dev/sdb7
$ btrfstune -S 1 /dev/sdb7
$ mount /dev/sdb7 /mnt/btrfs -o ro
$ btrfs fi bal /mnt/btrfs -----------------------> fail.
$ btrfs dev add /dev/sdb8 /mnt/btrfs
$ btrfs fi bal /mnt/btrfs -----------------------> works!
It should not be designed as an exception, and we'd better add another check for
mnt flags.
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Reviewed-by: Josef Bacik <josef@redhat.com>
Fully utilize our extent state's new helper functions to use
fastpath as much as possible.
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Reviewed-by: Josef Bacik <josef@redhat.com>
Reproduce:
$ mkfs.btrfs /dev/sdb7
$ mount /dev/sdb7 /mnt/btrfs -o ro
$ btrfs dev add /dev/sdb8 /mnt/btrfs
ERROR: error adding the device '/dev/sdb8' - Invalid argument
Since we mount with readonly options, and /dev/sdb7 is not a seeding one,
a readonly notification is preferred.
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Reviewed-by: Josef Bacik <josef@redhat.com>
We noticed that the ordered extent completion doesn't really rely on having
a page and that it could be done independantly of ending the writeback on a
page. This patch makes us not do the threaded endio stuff for normal
buffered writes and direct writes so we can end page writeback as soon as
possible (in irq context) and only start threads to do the ordered work when
it is actually done. Compression needs to be reworked some to take
advantage of this as well, but atm it has to do a find_get_page in its endio
handler so it must be done in its own thread. This makes direct writes
quite a bit faster. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
We are checking delalloc to see if it is ok to update the i_size. There are
2 cases it stops us from updating
1) If there is delalloc between our current disk_i_size and this ordered
extent
2) If there is delalloc between our current ordered extent and the next
ordered extent
These tests are racy however since we can set delalloc for these ranges at
any time. Also for the first case if we notice there is delalloc between
disk_i_size and our ordered extent we will not update disk_i_size and assume
that when that delalloc bit gets written out it will update everything
properly. However if we crash before that we will have file extents outside
of our i_size, which is not good, so this test is dangerous as well as racy.
Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
There is an off-by-one error: allocating room for a maximal result
string but without room for a trailing NUL. That, can lead to
returning a transformed string that is not NUL-terminated, and
then to a caller reading beyond end of the malloc'd buffer.
Rewrite to s/kzalloc/kmalloc/, remove unwarranted use of strncpy
(the result is guaranteed to fit), remove dead strlen at end, and
change a few variable names and comments.
Reviewed-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Jim Meyering <meyering@redhat.com>
A device with name of length BTRFS_DEVICE_PATH_NAME_MAX or longer
would not be NUL-terminated in the DEV_INFO ioctl result buffer.
Signed-off-by: Jim Meyering <meyering@redhat.com>
The buffer read-overrun would be triggered by a printk format
starting with <N>, where N is a single digit. NUL-terminate
after strncpy. Use memcpy, not strncpy, since we know the
string we're copying fits in the destination buffer and
contains no NUL byte.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Changing 'mount -oremount,thread_pool=2 /' didn't make any effect:
maximum amount of worker threads is specified in 2 places:
- in 'strict btrfs_fs_info::thread_pool_size'
- in each worker struct: 'struct btrfs_workers::max_workers'
'mount -oremount' updated only 'btrfs_fs_info::thread_pool_size'.
Fix it by pushing new maximum value to all created worker structures
as well.
Cc: Josef Bacik <josef@redhat.com>
Cc: Chris Mason <chris.mason@oracle.com>
Reviewed-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
We already do the btrfs_wait_ordered_range which will do this for us, so
just remove this call so we don't call it twice. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
In btrfs_wait_ordered_range we have been calling filemap_fdata_write() twice
because compression does strange things and then waiting. Then we look up
ordered extents and if we find any we will always schedule_timeout(); once
and then loop back around and do it all again. We will even check to see if
there is delalloc pages on this range and loop again. So this patch gets
rid of the multipe fdata_write() calls and just does
filemap_write_and_wait(). In the case of compression we will still find the
ordered extents and start those individually if we need to so that is ok,
but in the normal buffered case we avoid all this weird overhead.
Then in the case of the schedule_timeout(1), we don't need it. All callers
either 1) don't care, they just want to make sure what they just wrote maeks
it to disk or 2) are doing the lock()->lookup ordered->unlock->flush thing
in which case it will lock and check for ordered extents _anyway_ so get
back to them as quickly as possible. The delaloc check is simply not
needed, this only catches the case where we write to the file again since
doing the filemap_write_and_wait() and if the caller truly cares about that
it will take care of everything itself. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
These warnings are bogus since we will always have at least one page in an
eb, but to make the compiler happy just set ret = 0 in these two cases.
Thanks,
Btrfs: fix compile warnings in extent_io.c
These warnings are bogus since we will always have at least one page in an
eb, but to make the compiler happy just set ret = 0 in these two cases.
Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
When running compilebench I noticed we were spending some time looking up
acls on new inodes, which shouldn't be happening since there were no acls.
This is because when we init acls on the inode after creating them we don't
cache the fact there are no acls if there aren't any. Doing this adds a
little bit of a bump to my compilebench runs. Thanks,
Btrfs: cache no acl on new inodes
Signed-off-by: Josef Bacik <josef@redhat.com>
We've been keeping around the inode sequence number in hopes that somebody
would use it, but nobody uses it and people actually use i_version which
serves the same purpose, so use i_version where we used the incore inode's
sequence number and that way the sequence is updated properly across the
board, and not just in file write. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
When a fresh transaction begins, the tree mod log must be clean. Users of
the tree modification log must ensure they never span across transaction
boundaries.
We reset the sequence to 0 in this safe situation to make absolutely sure
overflow can't happen.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
This enables backref resolving on life trees while they are changing. This
is a prerequisite for quota groups and just nice to have for everything
else.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
The tree modification log together with the current state of the tree gives
a consistent, old version of the tree. btrfs_search_old_slot is used to
search through this old version and return old (dummy!) extent buffers.
Naturally, this function cannot do any tree modifications.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Record all relevant modifications to block pointers in the tree mod log so
that we can rewind them later on for backref walking.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
When running functions that can make changes to the internal trees
(e.g. btrfs_search_slot), we check if somebody may be interested in the
block we're currently modifying. If so, we record our modification to be
able to rewind it later on.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
The tree mod log will log modifications made fs-tree nodes. Most
modifications are done by autobalance of the tree. Such changes are recorded
as long as a block entry exists. When released, the log is cleaned.
With the tree modification log, it's possible to reconstruct a consistent
old state of the tree. This is required to do backref walking on a busy
file system.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
pass inode + parent's inode or NULL instead of dentry + bool saying
whether we want the parent or not.
NOTE: that needs ceph fix folded in.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=oLXf
-----END PGP SIGNATURE-----
Merge tag 'writeback' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux
Pull writeback tree from Wu Fengguang:
"Mainly from Jan Kara to avoid iput() in the flusher threads."
* tag 'writeback' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux:
writeback: Avoid iput() from flusher thread
vfs: Rename end_writeback() to clear_inode()
vfs: Move waiting for inode writeback from end_writeback() to evict_inode()
writeback: Refactor writeback_single_inode()
writeback: Remove wb->list_lock from writeback_single_inode()
writeback: Separate inode requeueing after writeback
writeback: Move I_DIRTY_PAGES handling
writeback: Move requeueing when I_SYNC set to writeback_sb_inodes()
writeback: Move clearing of I_SYNC into inode_sync_complete()
writeback: initialize global_dirty_limit
fs: remove 8 bytes of padding from struct writeback_control on 64 bit builds
mm: page-writeback.c: local functions should not be exposed globally
The tree modification log needs two ways to create dummy extent buffers,
once by allocating a fresh one (to rebuild an old root) and once by
cloning an existing one (to make private rewind modifications) to it.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Three callers of btrfs_free_tree_block or btrfs_alloc_tree_block passed
parameter for_cow = 1. In fact, these two functions should never mark
their tree modification operations as for_cow, because they can change
the number of blocks referenced by a tree.
Hence, we remove the extra for_cow parameter from these functions and
make them pass a zero down.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Before this patch we called find_all_leafs for a data extent, then called
find_all_roots and then looked into the extent to grab the information
we were seeking. This was done without holding the leaves locked to avoid
deadlocks. However, this can obviouly race with concurrent tree
modifications.
Instead, we now look into the extent while we're holding the lock during
find_all_leafs and store this information together with the leaf list.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
The key we store with a tree block backref is only a hint. It is set when
the ref is created and can remain correct for a long time. As the tree is
rebalanced, however, eventually the key no longer points to the correct
destination.
With this patch, we change find_parent_nodes to no longer add keys unless it
knows for sure they're correct (e.g. because they're for an extent data
backref). Then when we later encounter a backref ref with no parent and no
key set, we grab the block and take the first key from the block itself.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
That one has been around since the addition of backref.c. Due to the way we
calculate our slot numbers, after adding inline refs we're missing one keyed
ref unless it's located at the beginning of a new leaf.
Reported-by: Alexander Block <ablock84@googlemail.com>
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
ulist_next gets the pointer to the previously returned element to find the
next element from there. However, when we call ulist_add while iteration
with ulist_next is in progress (ulist explicitly supports this), we can
realloc the ulist internal memory, which makes the pointer to the previous
element useless.
Instead, we now use an iterator parameter that's independent from the
internal pointers.
Reported-by: Alexander Block <ablock84@googlemail.com>
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Pull trivial updates from Jiri Kosina:
"As usual, it's mostly typo fixes, redundant code elimination and some
documentation updates."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (57 commits)
edac, mips: don't change code that has been removed in edac/mips tree
xtensa: Change mail addresses of Hannes Weiner and Oskar Schirmer
lib: Change mail address of Oskar Schirmer
net: Change mail address of Oskar Schirmer
arm/m68k: Change mail address of Sebastian Hess
i2c: Change mail address of Oskar Schirmer
net: Fix tcp_build_and_update_options comment in struct tcp_sock
atomic64_32.h: fix parameter naming mismatch
Kconfig: replace "--- help ---" with "---help---"
c2port: fix bogus Kconfig "default no"
edac: Fix spelling errors.
qla1280: Remove redundant NULL check before release_firmware() call
remoteproc: remove redundant NULL check before release_firmware()
qla2xxx: Remove redundant NULL check before release_firmware() call.
aic94xx: Get rid of redundant NULL check before release_firmware() call
tehuti: delete redundant NULL check before release_firmware()
qlogic: get rid of a redundant test for NULL before call to release_firmware()
bna: remove redundant NULL test before release_firmware()
tg3: remove redundant NULL test before release_firmware() call
typhoon: get rid of redundant conditional before all to release_firmware()
...
It confuses Smatch that we use two names for the same lock. Plus the
shorter name is nicer. This doesn't change how the code works, it's
just a cleanup.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
The integrity checker used to be coded for nodesize == leafsize ==
sectorsize == PAGE_CACHE_SIZE.
This is now changed to support sizes for nodesize and leafsize which are
N * PAGE_CACHE_SIZE.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
In tree_insert, var *entry is used in the loop only, and is useless
out of the loop. Remove the useless assignment after the loop.
Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com>
The return value of find_first_extent_bit is 1 or 0, no < 0.
And if found something, return 0; if nothing was found, return 1.
Fix the comment.
Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com>
num_extent_pages returns the number of pages in the specific range, not
the index of the last page in the eb range.
btrfs_release_extent_buffer_page is called with start_idx set 0 in current
codes, so it's not a problem yet. But the logic is indeed wrong.
Fix it here.
Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com>
Pull btrfs fixes from Chris Mason:
"The big ones here are a memory leak we introduced in rc1, and a
scheduling while atomic if the transid on disk doesn't match the
transid we expected. This happens for corrupt blocks, or out of date
disks.
It also fixes up the ioctl definition for our ioctl to resolve logical
inode numbers. The __u32 was a merging error and doesn't match what
we ship in the progs."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: avoid sleeping in verify_parent_transid while atomic
Btrfs: fix crash in scrub repair code when device is missing
btrfs: Fix mismatching struct members in ioctl.h
Btrfs: fix page leak when allocing extent buffers
Btrfs: Add properly locking around add_root_to_dirty_list
verify_parent_transid needs to lock the extent range to make
sure no IO is underway, and so it can safely clear the
uptodate bits if our checks fail.
But, a few callers are using it with spinlocks held. Most
of the time, the generation numbers are going to match, and
we don't want to switch to a blocking lock just for the error
case. This adds an atomic flag to verify_parent_transid,
and changes it to return EAGAIN if it needs to block to
properly verifiy things.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
After we moved inode_sync_wait() from end_writeback() it doesn't make sense
to call the function end_writeback() anymore. Rename it to clear_inode()
which well says what the function really does - set I_CLEAR flag.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Fix that when scrub tries to repair an I/O or checksum error and one of
the devices containing the mirror is missing, it crashes in bio_add_page
because the bdev is a NULL pointer for missing devices.
Reported-by: Marco L. Crociani <marco.crociani@gmail.com>
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Fix the size members of btrfs_ioctl_ino_path_args and
btrfs_ioctl_logical_ino_args. The user space btrfs-progs utilities used
__u64 and the kernel headers used __u32 before.
Signed-off-by: Alexander Block <ablock84@googlemail.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
If we happen to alloc a extent buffer and then alloc a page and notice that
page is already attached to an extent buffer, we will only unlock it and
free our existing eb. Any pages currently attached to that eb will be
properly freed, but we don't do the page_cache_release() on the page where
we noticed the other extent buffer which can cause us to leak pages and I
hope cause the weird issues we've been seeing in this area. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
add_root_to_dirty_list happens once at the very beginning of the
transaction, but it is still racey.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Pull btrfs fixes from Chris Mason:
"This has our collection of bug fixes. I missed the last rc because I
thought our patches were making NFS crash during my xfs test runs.
Turns out it was an NFS client bug fixed by someone else while I tried
to bisect it.
All of these fixes are small, but some are fairly high impact. The
biggest are fixes for our mount -o remount handling, a deadlock due to
GFP_KERNEL allocations in readdir, and a RAID10 error handling bug.
This was tested against both 3.3 and Linus' master as of this morning."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (26 commits)
Btrfs: reduce lock contention during extent insertion
Btrfs: avoid deadlocks from GFP_KERNEL allocations during btrfs_real_readdir
Btrfs: Fix space checking during fs resize
Btrfs: fix block_rsv and space_info lock ordering
Btrfs: Prevent root_list corruption
Btrfs: fix repair code for RAID10
Btrfs: do not start delalloc inodes during sync
Btrfs: fix that check_int_data mount option was ignored
Btrfs: don't count CRC or header errors twice while scrubbing
Btrfs: fix btrfs_ioctl_dev_info() crash on missing device
btrfs: don't return EINTR
Btrfs: double unlock bug in error handling
Btrfs: always store the mirror we read the eb from
fs/btrfs/volumes.c: add missing free_fs_devices
btrfs: fix early abort in 'remount'
Btrfs: fix max chunk size check in chunk allocator
Btrfs: add missing read locks in backref.c
Btrfs: don't call free_extent_buffer twice in iterate_irefs
Btrfs: Make free_ipath() deal gracefully with NULL pointers
Btrfs: avoid possible use-after-free in clear_extent_bit()
...
We're spending huge amounts of time on lock contention during
end_io processing because we unconditionally assume we are overwriting
an existing extent in the file for each IO.
This checks to see if we are outside i_size, and if so, it uses a
less expensive readonly search of the btree to look for existing
extents.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Btrfs has an optimization where it will preallocate dentries during
readdir to fill in enough information to open the inode without an extra
lookup.
But, we're calling d_alloc, which is doing GFP_KERNEL allocations, and
that leads to deadlocks because our readdir code has tree locks held.
For now, disable this optimization. We'll fix the gfp mask in the next
merge window.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Fix out-of-space checking, addressing a warning and potential resource
leak when resizing the filesystem down while allocating blocks.
Signed-off-by: Daniel J Blueman <daniel@quora.org>
Reviewed-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
may_commit_transaction() calls
spin_lock(&space_info->lock);
spin_lock(&delayed_rsv->lock);
and update_global_block_rsv() calls
spin_lock(&block_rsv->lock);
spin_lock(&sinfo->lock);
Lockdep complains about this at run time.
Everywhere except in update_global_block_rsv(), the space_info lock is
the outer lock, therefore the locking order in update_global_block_rsv()
is changed.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
I was seeing root_list corruption on unmount during fs resize in 3.4-rc4; add
correct locking to address this.
Signed-off-by: Daniel J Blueman <daniel@quora.org>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
btrfs_map_block sets mirror_num, so that the repair code knows eventually
which device gave us the read error. For RAID10, mirror_num must be 1 or 2.
Before this fix mirror_num was incorrectly related to our stripe index.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
btrfs_start_delalloc_inodes will just walk the list of delalloc inodes and
start writing them out, but it doesn't splice the list or anything so as
long as somebody is doing work on the box you could end up in this section
_forever_. So just remove it, it's not needed anyway since sync will start
writeback on all inodes anyway, all we need to do is wait for ordered
extents and then we can commit the transaction. In my horrible torture test
sync goes from taking 4 minutes to about 1.5 minutes. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
The bitfield member mount_opt was too small by one bit to hold the mount
option that enabled to include data extents in the integrity checker.
Since the same issue happened when the BTRFS_MOUNT_PANIC_ON_FATAL_ERROR
option was added (git rebase silently merges so that the increase of the
size of the bitfield member is lost), the bit limit was removed entirely.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
When a filesystem is mounted with the degraded option, it is
possible that some of the devices are not there.
btrfs_ioctl_dev_info() crashs in this case because the device
name is a NULL pointer. This ioctl was only used for scrub.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
It is basically a good thing if we are interruptible when waiting for
free space, but the generality in which it is implemented currently
leads to system calls being interruptible that are not documented this
way. For example git can't handle interrupted unlink(), leading to
corrupt repos under space pressure.
Instead we raise the bar to only be interruptible by SIGKILL.
Thanks to David Sterba for suggesting this.
Signed-off-by: Arne Jansen <sensille@gmx.net>
The caller expects this function to return with the lock held and
releases it immediately on error.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
A user reported a panic where we were trying to fix a bad mirror but the
mirror number we were giving was 0, which is invalid. This is because we
don't do the transid verification until after the read, so as far as the
read code is concerned the read was a success. So instead store the mirror
we read from so that if there is some failure post read we know which mirror
to try next and which mirror needs to be fixed if we find a good copy of the
block. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Josef Bacik <josef@redhat.com>
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Fix a bug, where in case we need to adjust stripe_size so that the
length of the resulting chunk is less than or equal to max_chunk_size,
DUP chunks turn out to be only half as big as they could be.
Cc: Arne Jansen <sensille@gmx.net>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Jan Schmidt
Arne Jansen
Linus Torvalds
Chris Mason
Josef Bacik
Liu Bo
Alexander Block
Ilya Dryomov
Josef Bacik
Stefan Behrens
Miao Xie
Li Zefan
Chris Mason
Tsutomu Itoh
Asias He
Jim Meyering
Jim Meyering
Daniel J Blueman
Sergei Trofimovich
Al Viro
Dan Carpenter
Wang Sheng-Hui
Jan Kara
Julia Lawall