Граф коммитов

435 Коммитов

Автор SHA1 Сообщение Дата
Linus Torvalds f8fd5c2483 This pull request is full of clk driver changes. In fact, there aren't any
changes to the clk framework this time around. That's probably because everyone
 was on vacation (yours truly included). We did lose a couple clk drivers this
 time around because nobody was using those devices. That skews the diffstat a
 bit, but either way, nothing looks out of the ordinary here. The usual suspects
 are chugging along adding support for more SoCs and fixing bugs.
 
 If I had to choose, I'd say the theme for the past few months has been
 "polish". There's quite a few patches that migrate to
 devm_platform_ioremap_resource() in here. And there's more than a handful of
 patches that move the NR_CLKS define from the DT binding header to the driver.
 There's even patches that migrate drivers to use clk_parent_data and clk_hw to
 describe clk tree topology. It seems that the spring (summer?) cleaning bug got
 some folks, or the semiconductor shortage finally hit the software side.
 
 New Drivers:
  - StarFive JH7110 SoC clock drivers
  - Qualcomm IPQ5018 Global Clock Controller driver
  - Versa3 clk generator to support 48KHz playback/record with audio codec on
    RZ/G2L SMARC EVK
 
 Removed Drivers:
  - Remove non-OF mmp clk drivers
  - Remove OXNAS clk driver
 
 Updates:
  - Add __counted_by to struct clk_hw_onecell_data and struct spmi_pmic_div_clk_cc
  - Move defines for numbers of clks (NR_CLKS) from DT headers to drivers
  - Introduce kstrdup_and_replace() and use it
  - Add PLL rates for Rockchip rk3568
  - Add the display clock tree for Rockchip rv1126
  - Add Audio Clock Generator (ADG) clocks on Renesas R-Car Gen3 and RZ/G2 SoCs
  - Convert sun9i-mmc clock to use devm_platform_get_and_ioremap_resource()
  - Fix function name in a comment in ccu_mmc_timing.c
  - Parameter name correction for ccu_nkm_round_rate()
  - Implement CLK_SET_RATE_PARENT for Allwinner NKM clocks, i.e. consider alternative
    parent rates when determining clock rates
  - Set CLK_SET_RATE_PARENT for Allwinner A64 pll-mipi
  - Support finding closest (as opposed to closest but not higher) clock rate
    for NM, NKM, mux and div type clocks, as use it for Allwinner A64 pll-video0
  - Prefer current parent rate if able to generate ideal clock rate for Allwinner NKM clocks
  - Clean up Qualcomm SMD RPM driver, with interconnect bus clocks moved out to
    the interconnect drivers
  - Fix various PM runtime bugs across many Qualcomm clk drivers
  - Migrate Qualcomm MDM9615 is to parent_hw and parent_data
  - Add network related resets on Qualcomm IPQ4019
  - Add a couple missing USB related clocks to Qualcomm IPQ9574
  - Add missing gpll0_sleep_clk_src to Qualcomm MSM8917 global clock controller
  - In the Qualcomm QDU1000 global clock controller, GDSCs, clkrefs, and GPLL1 are
    added, while PCIe pipe clock, SDCC rcg ops are corrected
  - Add missing GDSCs to and correct GDSCs for the SC8280XP global clock controller driver
  - Support retention for the Qualcomm SC8280XP display clock controller GDSCs.
  - Qualcommm's SDCC apps_clk_src is marked with CLK_OPS_PARENT_ENABLE to fix
    issues with missing parent clocks across sc7180, sm7150, sm6350 and sm8250,
    while sm8450 is corrected to use floor ops
  - Correct Qualcomm SM6350 GPU clock controller's clock supplies
  - Drop unwanted clocks from the Qualcomm IPQ5332 GCC driver
  - Add missing OXILICX GDSC to Qualcomm MSM8226 GCC
  - Change the delay in the Qualcomm reset controller to fsleep() for correctness
  - Extend the Qualcomm SM83550 Video clock controller to support SC8280XP
  - Add graphics clock support on Renesas RZ/G2M, RZ/G2N, RZ/G2E, and R-Car H3,
    M3-W, and M3-N SoCs
  - Add Clocked Serial Interface (CSI) clocks on Renesas RZ/V2M
  - Add PWM (MTU3) clock and reset on Renesas RZ/G2UL and RZ/Five
  - Add the PDM IPC clock for i.MX93
  - Add 519.75MHz frequency support for i.MX9 PLL
  - Simplify the .determine_rate() implementation for i.MX GPR mux
  - Make the i.MX8QXP LPCG clock use devm_platform_ioremap_resource()
  - Add the audio mux clock to i.MX8
  - Fix the SPLL2 MULT range for PLLv4
  - Update the SPLL2 type in i.MX8ULP
  - Fix the SAI4 clock on i.MX8MP
  - Add silicon revision print for i.MX25 on clocks init
  - Drop the return value from __mx25_clocks_init()
  - Fix the clock pauses on no-op set_rate for i.MX8M composite clock
  - Drop restrictions for i.MX PLL14xx and fix its max prediv value
  - Drop the 393216000 and 361267200 from i.MX PLL14xx rate table to allow
    glitch free switching
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAmTv2wkRHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSW1LRAAuHR2HoyB4bRHmCa1bfOfYYDfSWsBWEav
 tWIfBl86Nl/Je50Gk2NJ9vqU5OPqRZ57TIniijHHoX5n7/kYcr8KVmlomY07hUeg
 CzWyothkxg4k7+rQwVAWvmlR2YAVwzHDKcwq7gkMZOnW/y26LXip99cjopu2CJLx
 zVwTgvWollmd4KVlicnAlx4zUjgNkWR24iA4Lcf5ir+Dr6FYNjxLI+akBA8EPxxi
 wLixZbScgBSgpGn6KVgoFhclCToPS0gt5m6HfQxJ/svOCU54l+jRKpzkNZGWvyu4
 A8t3CRrwL2iS/mfCGk2yRlaKySoLLpjlpW1AI7fHTWbG2P6p8ZphtN7jOeeAEsbq
 TNpzWEjtY6B/lfRzxxINXkrtLaqmlnFY/P5np5fDrf/61gRFxLFQemyRdY/xCSJf
 Kwq8ja1mrSGWoDGG9XhDqTf9Yek9LRObNzlDrEmn/i/qLTcxhOIz58pzHg4iAlx5
 9HDtnJ8hKg4uE1TtT12Bmasb1+WzG7GYYESNfKWZhCvbRqEUzcDOHk7xpwYa1ffx
 yZIgMs7Sb/exNW8LMPYmgnyj/f9eo5IdjiQvune+Zy5NrdzfyN6Sf/LSibrqCF2z
 X5aFHqQrR8+PifD+se+g5HPa0ezSmBIhXzYUTOC6f+nywlrJjhwDXPDYI6Lcd//p
 r4mpOmJS+G4=
 =h2Jz
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk subsystem updates from Stephen Boyd:
 "This pull request is full of clk driver changes. In fact, there aren't
  any changes to the clk framework this time around. That's probably
  because everyone was on vacation (yours truly included). We did lose a
  couple clk drivers this time around because nobody was using those
  devices. That skews the diffstat a bit, but either way, nothing looks
  out of the ordinary here. The usual suspects are chugging along adding
  support for more SoCs and fixing bugs.

  If I had to choose, I'd say the theme for the past few months has been
  "polish". There's quite a few patches that migrate to
  devm_platform_ioremap_resource() in here. And there's more than a
  handful of patches that move the NR_CLKS define from the DT binding
  header to the driver. There's even patches that migrate drivers to use
  clk_parent_data and clk_hw to describe clk tree topology. It seems
  that the spring (summer?) cleaning bug got some folks, or the
  semiconductor shortage finally hit the software side.

  New Drivers:
   - StarFive JH7110 SoC clock drivers
   - Qualcomm IPQ5018 Global Clock Controller driver
   - Versa3 clk generator to support 48KHz playback/record with audio
     codec on RZ/G2L SMARC EVK

  Removed Drivers:
   - Remove non-OF mmp clk drivers
   - Remove OXNAS clk driver

  Updates:
   - Add __counted_by to struct clk_hw_onecell_data and struct
     spmi_pmic_div_clk_cc
   - Move defines for numbers of clks (NR_CLKS) from DT headers to
     drivers
   - Introduce kstrdup_and_replace() and use it
   - Add PLL rates for Rockchip rk3568
   - Add the display clock tree for Rockchip rv1126
   - Add Audio Clock Generator (ADG) clocks on Renesas R-Car Gen3 and
     RZ/G2 SoCs
   - Convert sun9i-mmc clock to use
     devm_platform_get_and_ioremap_resource()
   - Fix function name in a comment in ccu_mmc_timing.c
   - Parameter name correction for ccu_nkm_round_rate()
   - Implement CLK_SET_RATE_PARENT for Allwinner NKM clocks, i.e.
     consider alternative parent rates when determining clock rates
   - Set CLK_SET_RATE_PARENT for Allwinner A64 pll-mipi
   - Support finding closest (as opposed to closest but not higher)
     clock rate for NM, NKM, mux and div type clocks, as use it for
     Allwinner A64 pll-video0
   - Prefer current parent rate if able to generate ideal clock rate for
     Allwinner NKM clocks
   - Clean up Qualcomm SMD RPM driver, with interconnect bus clocks
     moved out to the interconnect drivers
   - Fix various PM runtime bugs across many Qualcomm clk drivers
   - Migrate Qualcomm MDM9615 is to parent_hw and parent_data
   - Add network related resets on Qualcomm IPQ4019
   - Add a couple missing USB related clocks to Qualcomm IPQ9574
   - Add missing gpll0_sleep_clk_src to Qualcomm MSM8917 global clock
     controller
   - In the Qualcomm QDU1000 global clock controller, GDSCs, clkrefs,
     and GPLL1 are added, while PCIe pipe clock, SDCC rcg ops are
     corrected
   - Add missing GDSCs to and correct GDSCs for the SC8280XP global
     clock controller driver
   - Support retention for the Qualcomm SC8280XP display clock
     controller GDSCs.
   - Qualcommm's SDCC apps_clk_src is marked with CLK_OPS_PARENT_ENABLE
     to fix issues with missing parent clocks across sc7180, sm7150,
     sm6350 and sm8250, while sm8450 is corrected to use floor ops
   - Correct Qualcomm SM6350 GPU clock controller's clock supplies
   - Drop unwanted clocks from the Qualcomm IPQ5332 GCC driver
   - Add missing OXILICX GDSC to Qualcomm MSM8226 GCC
   - Change the delay in the Qualcomm reset controller to fsleep() for
     correctness
   - Extend the Qualcomm SM83550 Video clock controller to support
     SC8280XP
   - Add graphics clock support on Renesas RZ/G2M, RZ/G2N, RZ/G2E, and
     R-Car H3, M3-W, and M3-N SoCs
   - Add Clocked Serial Interface (CSI) clocks on Renesas RZ/V2M
   - Add PWM (MTU3) clock and reset on Renesas RZ/G2UL and RZ/Five
   - Add the PDM IPC clock for i.MX93
   - Add 519.75MHz frequency support for i.MX9 PLL
   - Simplify the .determine_rate() implementation for i.MX GPR mux
   - Make the i.MX8QXP LPCG clock use devm_platform_ioremap_resource()
   - Add the audio mux clock to i.MX8
   - Fix the SPLL2 MULT range for PLLv4
   - Update the SPLL2 type in i.MX8ULP
   - Fix the SAI4 clock on i.MX8MP
   - Add silicon revision print for i.MX25 on clocks init
   - Drop the return value from __mx25_clocks_init()
   - Fix the clock pauses on no-op set_rate for i.MX8M composite clock
   - Drop restrictions for i.MX PLL14xx and fix its max prediv value
   - Drop the 393216000 and 361267200 from i.MX PLL14xx rate table to
     allow glitch free switching"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (207 commits)
  clk: qcom: Fix SM_GPUCC_8450 dependencies
  clk: lmk04832: Support using PLL1_LD as SPI readback pin
  clk: lmk04832: Don't disable vco clock on probe fail
  clk: lmk04832: Set missing parent_names for output clocks
  clk: mvebu: Convert to devm_platform_ioremap_resource()
  clk: nuvoton: Convert to devm_platform_ioremap_resource()
  clk: socfpga: agilex: Convert to devm_platform_ioremap_resource()
  clk: ti: Use devm_platform_get_and_ioremap_resource()
  clk: mediatek: Convert to devm_platform_ioremap_resource()
  clk: hsdk-pll: Convert to devm_platform_ioremap_resource()
  clk: gemini: Convert to devm_platform_ioremap_resource()
  clk: fsl-sai: Convert to devm_platform_ioremap_resource()
  clk: bm1880: Convert to devm_platform_ioremap_resource()
  clk: axm5516: Convert to devm_platform_ioremap_resource()
  clk: actions: Convert to devm_platform_ioremap_resource()
  clk: cdce925: Remove redundant of_match_ptr()
  clk: pxa910: Move number of clocks to driver source
  clk: pxa1928: Move number of clocks to driver source
  clk: pxa168: Move number of clocks to driver source
  clk: mmp2: Move number of clocks to driver source
  ...
2023-08-30 19:53:39 -07:00
Andrei Coardos 417a3a5ae4 reset: ti: syscon: remove unneeded call to platform_set_drvdata()
This function call was found to be unnecessary as there is no equivalent
platform_get_drvdata() call to access the private data of the driver. Also,
the private data is defined in this driver, so there is no risk of it being
accessed outside of this driver file.

Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com>
Acked-by: Andrew Davis <afd@ti.com>
Reviewed-by: Alexandru Ardelean <alex@shruggie.ro>
Link: https://lore.kernel.org/r/20230807111534.12392-1-aboutphysycs@gmail.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2023-08-08 15:31:00 +02:00
Andrei Coardos 0c8603cd30 reset: zynqmp: removed unneeded call to platform_set_drvdata()
This function call was found to be unnecessary as there is no equivalent
platform_get_drvdata() call to access the private data of the driver. Also,
the private data is defined in this driver, so there is no risk of it being
accessed outside of this driver file.

Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com>
Reviewed-by: Alexandru Ardelean <alex@shruggie.ro>
Link: https://lore.kernel.org/r/20230807114344.15076-1-aboutphysycs@gmail.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2023-08-08 15:31:00 +02:00
Andrei Coardos 877fbf320a reset: zynq: remove unneeded call to platfrom_set_drvdata()
This function call was found to be unnecessary as there is no equivalent
platform_get_drvdata() call to access the private data of the driver. Also,
the private data is defined in this driver, so there is no risk of it being
accessed outside of this driver file.

Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com>
Reviewed-by: Alexandru Ardelean <alex@shruggie.ro>
Link: https://lore.kernel.org/r/20230807113545.14743-1-aboutphysycs@gmail.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2023-08-08 15:31:00 +02:00
Andrei Coardos 38f190f941 reset: uniphier-glue: remove unneeded call to platform_set_drvdata()
This function call was found to be unnecessary as there is no equivalent
platform_get_drvdata() call to access the private data of the driver. Also,
the private data is defined in this driver, so there is no risk of it being
accessed outside of this driver file.

Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com>
Reviewed-by: Alexandru Ardelean <alex@shruggie.ro>
Link: https://lore.kernel.org/r/20230807112705.12862-1-aboutphysycs@gmail.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2023-08-08 15:31:00 +02:00
Andrei Coardos 00e1b4427d reset: npcm: remove unneeded call to platform_set_drvdata()
This function call was found to be unnecessary as there is no equivalent
platform_get_drvdata() call to access the private data of the driver. Also,
the private data is defined in this driver, so there is no risk of it being
accessed outside of this driver file.

Reviewed-by: Alexandru Ardelean <alex@shruggie.ro>
Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com>
Link: https://lore.kernel.org/r/20230807105630.11638-1-aboutphysycs@gmail.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2023-08-08 15:31:00 +02:00
Andrei Coardos 1b5adb40cd reset: meson: remove unneeded call to platform_set_drvdata()
This function call was found to be unnecessary as there is no equivalent
platform_get_drvdata() call to access the private data of the driver. Also,
the private data is defined in this driver, so there is no risk of it being
accessed outside of this driver file.

Reviewed-by: Alexandru Ardelean <alex@shruggie.ro>
Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com>
Link: https://lore.kernel.org/r/20230807105400.11560-1-aboutphysycs@gmail.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2023-08-08 15:31:00 +02:00
Andrei Coardos fdc670acf6 reset: lpc18xx: remove unneeded call to platform_set_drvdata()
This function call was found to be unnecessary as there is no equivalent
platform_get_drvdata() call to access the private data of the driver. Also,
the private data is defined in this driver, so there is no risk of it being
accessed outside of this driver file.

Reviewed-by: Alexandru Ardelean <alex@shruggie.ro>
Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com>
Link: https://lore.kernel.org/r/20230807104549.11225-1-aboutphysycs@gmail.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2023-08-08 15:31:00 +02:00
Andrei Coardos 41bbf70471 reset: lantiq: remove unneeded call to platform_set_drvdata()
This function call was found to be unnecessary as there is no equivalent
platform_get_drvdata() call to access the private data of the driver. Also,
the private data is defined in this driver, so there is no risk of it being
accessed outside of this driver file.

Reviewed-by: Alexandru Ardelean <alex@shruggie.ro>
Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com>
Link: https://lore.kernel.org/r/20230803104225.29740-1-aboutphysycs@gmail.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2023-08-08 15:31:00 +02:00
Andrei Coardos 7640e58d40 reset: bcm6345: remove unneeded call to platform_set_drvdata()
This function call was found to be unnecessary as there is no equivalent
platform_get_drvdata() call to access the private data of the driver. Also,
the private data is defined in this driver, so there is no risk of it being
accessed outside of this driver file.

Reviewed-by: Alexandru Ardelean <alex@shruggie.ro>
Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com>
Link: https://lore.kernel.org/r/20230803104142.29694-1-aboutphysycs@gmail.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2023-08-08 15:31:00 +02:00
Andrei Coardos 5eddff6add reset: ath79: remove unneeded call to platform_set_drvdata()
This function call was found to be unnecessary as there is no equivalent
platform_get_drvdata() call to access the private data of the driver. Also,
the private data is defined in this driver, so there is no risk of it being
accessed outside of this driver file.

Reviewed-by: Alexandru Ardelean <alex@shruggie.ro>
Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com>
Link: https://lore.kernel.org/r/20230803104102.29647-1-aboutphysycs@gmail.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2023-08-08 15:31:00 +02:00
Wang Ming 38d09b9897 reset: hisilicon: Use dev_err_probe instead of dev_err
The probe process may generate EPROBE_DEFER. In this case,
dev_err_probe can still record err information.
This helps simplify code and standardize error output.

Signed-off-by: Wang Ming <machel@vivo.com>
Link: https://lore.kernel.org/r/20230726114555.5011-1-machel@vivo.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2023-07-28 18:07:01 +02:00
Piyush Mehta f7cb24e466 reset: reset-zynqmp: add support for Versal NET platform
Updated the reset driver to support Versal NET platform.
As part of adding support for versal NET:
- Added Versal NET specific compatible string.
- Reset Id and number of resets.

Signed-off-by: Piyush Mehta <piyush.mehta@amd.com>
Link: https://lore.kernel.org/r/20230721041119.4058430-3-piyush.mehta@amd.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2023-07-28 18:07:01 +02:00
Rob Herring bad8a8afe1 reset: Explicitly include correct DT includes
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.

Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Acked-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Link: https://lore.kernel.org/r/20230714174939.4063667-1-robh@kernel.org
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2023-07-28 17:36:20 +02:00
Xingyu Wu 0e2b2a7627 reset: starfive: jh7110: Add StarFive STG/ISP/VOUT resets support
Add new struct members and auxiliary_device_id of resets to support
System-Top-Group, Image-Signal-Process and Video-Output on the StarFive
JH7110 SoC.

Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Link: https://lore.kernel.org/r/20230724055440.100947-1-xingyu.wu@starfivetech.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-07-26 11:45:31 -07:00
Linus Torvalds e4c8d01865 ARM: SoC drivers for 6.5
Nothing surprising in the SoC specific drivers, with the usual updates:
 
  * Added or improved SoC driver support for Tegra234, Exynos4121, RK3588,
    as well as multiple Mediatek and Qualcomm chips
 
  * SCMI firmware gains support for multiple SMC/HVC transport and version
    3.2 of the protocol
 
  * Cleanups amd minor changes for the reset controller, memory controller,
    firmware and sram drivers
 
  * Minor changes to amd/xilinx, samsung, tegra, nxp, ti, qualcomm,
    amlogic and renesas SoC specific drivers
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmSdmbIACgkQYKtH/8kJ
 UicewQ/6Aq8j5pBFYBimZoyQ0bi9z+prGrHoDDYLew2vKjtOXJl5z7ZnM3J1oyPt
 Zvis3IaGkHJCuuqotPdsquZrzHq8slzXzwkHPfHORJBC4gV0V/vMS8w32tO5FfTq
 ULrMyWnbsU7Udeywc2xuEpAoC9+bXX9brnCpa3H41peIGZKM+0g7EE6FASt3YaOk
 O+ZMSGqF8QbCqSQrUH3GudFlFMy/VxIvwuUsbLt8aNkRACunQZXVgUdArvLV49nX
 SElFN7hOVRoVDv0rgYMxlwElymrta/kMyjLba8GU1GIhzyDGozVqIJQAnsQ3f6CC
 yyzaJm27zzJH0mx9jx4W+JLBdjqDL4ctE2WyllRVIpTGYMHiMQtutHNwtNupIuD5
 j9j/fIVQWZqOdWXnA6V/CHYN1MZBRTH3KQcnLlYPC01dWKThPDnrHGfwOkfsrwtN
 zuERJJ+gd5b8KW4dmy1ueDOSB8162LxbS7iHxpOBGySmqVOYj3XUqACZhKRfXfIQ
 BVj9punCE/gO2fMb9IZByjeOzgtV+PBRmPxoglyaGkT4fVfL06kEbpKFYbXXq9b/
 aAS/U84gGr8ebWsOXszwDnBzTZRzjMVv/T9KDTTJuWbBEPNyCR7fUG0cZ50rSKnJ
 2cTPe3a0sS6LaBt71qfExCIfxG+cJ2c3N1U5/jb2C49Aob45obs=
 =zvLr
 -----END PGP SIGNATURE-----

Merge tag 'soc-drivers-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "Nothing surprising in the SoC specific drivers, with the usual
  updates:

   - Added or improved SoC driver support for Tegra234, Exynos4121,
     RK3588, as well as multiple Mediatek and Qualcomm chips

   - SCMI firmware gains support for multiple SMC/HVC transport and
     version 3.2 of the protocol

   - Cleanups amd minor changes for the reset controller, memory
     controller, firmware and sram drivers

   - Minor changes to amd/xilinx, samsung, tegra, nxp, ti, qualcomm,
     amlogic and renesas SoC specific drivers"

* tag 'soc-drivers-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (118 commits)
  dt-bindings: interrupt-controller: Convert Amlogic Meson GPIO interrupt controller binding
  MAINTAINERS: add PHY-related files to Amlogic SoC file list
  drivers: meson: secure-pwrc: always enable DMA domain
  tee: optee: Use kmemdup() to replace kmalloc + memcpy
  soc: qcom: geni-se: Do not bother about enable/disable of interrupts in secondary sequencer
  dt-bindings: sram: qcom,imem: document qdu1000
  soc: qcom: icc-bwmon: Fix MSM8998 count unit
  dt-bindings: soc: qcom,rpmh-rsc: Require power-domains
  soc: qcom: socinfo: Add Soc ID for IPQ5300
  dt-bindings: arm: qcom,ids: add SoC ID for IPQ5300
  soc: qcom: Fix a IS_ERR() vs NULL bug in probe
  soc: qcom: socinfo: Add support for new fields in revision 19
  soc: qcom: socinfo: Add support for new fields in revision 18
  dt-bindings: firmware: scm: Add compatible for SDX75
  soc: qcom: mdt_loader: Fix split image detection
  dt-bindings: memory-controllers: drop unneeded quotes
  soc: rockchip: dtpm: use C99 array init syntax
  firmware: tegra: bpmp: Add support for DRAM MRQ GSCs
  soc/tegra: pmc: Use devm_clk_notifier_register()
  soc/tegra: pmc: Simplify debugfs initialization
  ...
2023-06-29 15:22:19 -07:00
Geert Uytterhoeven aead1076f3 reset: RESET_NUVOTON_MA35D1 should depend on ARCH_MA35
The Nuvoton MA35D1 reset controller is only present on Nuvoton MA35
SoCs.  Hence add a dependency on ARCH_MA35, to prevent asking the user
about this driver when configuring a kernel without MA35 SoC support.
Also, do not enable the driver by default when merely compile-testing.

While at it, fix a misspelling of "Nuvoton".

Fixes: e4bb55d6cc ("reset: Add Nuvoton ma35d1 reset driver support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-06 12:18:44 +02:00
Jacky Huang e4bb55d6cc reset: Add Nuvoton ma35d1 reset driver support
This driver supports individual IP reset for the MA35D1. The reset
control registers are a subset of the system control registers.

Signed-off-by: Jacky Huang <ychuang3@nuvoton.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-05 13:18:09 +02:00
Philipp Zabel afb39e2bd3 reset: mpfs: select AUXILIARY_BUS
CONFIG_AUXILIARY_BUS is not a user-visible symbol, replace 'depends on'
with 'select'.

Cc: Daire McNamara <daire.mcnamara@microchip.com>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230502102041.1418397-1-p.zabel@pengutronix.de
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2023-05-08 09:28:31 +02:00
Philipp Zabel 52990390f9 reset: starfive: select AUXILIARY_BUS
CONFIG_AUXILIARY_BUS is not a user-visible symbol, replace 'depends on'
with 'select'.

Suggested-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Link: https://lore.kernel.org/r/20230502102050.1418417-1-p.zabel@pengutronix.de
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2023-05-08 09:28:31 +02:00
Neil Armstrong ac59ed9cdb reset: oxnas: remove obsolete reset driver
Due to lack of maintainance and stall of development for a few years now,
and since no new features will ever be added upstream, remove support
for OX810 and OX820 peripheral reset.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230331-topic-oxnas-upstream-remove-v1-17-5bd58fd1dd1f@linaro.org
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2023-05-08 09:28:31 +02:00
Lukas Bulwahn 20a6a4d722 reset: sti: simplify driver's config and build
With commit 64933513e4 ("reset: sti: Remove STiH415/6 reset support"),
there is only one sti reset driver left and there no need to define a
dedicated config STI_RESET_SYSCFG, which is selected by the config for the
STiH407 reset driver.

Simply add reset-syscfg.c to the build for the STiH407 reset driver.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://lore.kernel.org/r/20230330112347.31137-2-lukas.bulwahn@gmail.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2023-05-08 09:28:31 +02:00
Ye Xingchen da46de512f reset: meson-audio-arb: Use dev_err_probe()
Replace the open-code with dev_err_probe() to simplify the code.

Signed-off-by: Ye Xingchen <ye.xingchen@zte.com.cn>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/202303231653447704556@zte.com.cn
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2023-05-08 09:28:31 +02:00
Alain Volmat 2db4da5948 reset: sti: rely on regmap_field_read_poll_timeout for ack wait
Use regmap_field_read_poll_timeout function when waiting for the
ack bit upon performing the reset control.

Signed-off-by: Alain Volmat <avolmat@me.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://lore.kernel.org/r/20230210224332.98482-1-avolmat@me.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2023-05-08 09:28:31 +02:00
Ye Xingchen fdcfdb230c reset: brcmstb-rescal: Use devm_platform_ioremap_resource()
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to Use devm_platform_ioremap_resource(), as this is exactly
what this function does.

Suggested-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Ye Xingchen <ye.xingchen@zte.com.cn>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/202302161052126378140@zte.com.cn
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2023-05-08 09:28:31 +02:00
Ye Xingchen cabf1ce357 reset: meson: Use devm_platform_ioremap_resource()
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to Use devm_platform_ioremap_resource(), as this is exactly
what this function does.

Suggested-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Ye Xingchen <ye.xingchen@zte.com.cn>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/202302161054598138273@zte.com.cn
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2023-05-08 09:28:31 +02:00
Ye Xingchen 1d81ba35df reset: reset-hsdk: Use devm_platform_ioremap_resource()
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to Use devm_platform_ioremap_resource(), as this is exactly
what this function does.

Suggested-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Ye Xingchen <ye.xingchen@zte.com.cn>
Link: https://lore.kernel.org/r/202302161056304138337@zte.com.cn
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2023-05-08 09:28:31 +02:00
Ye Xingchen 68fda5a961 reset: lpc18xx: Use devm_platform_ioremap_resource()
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to Use devm_platform_ioremap_resource(), as this is exactly
what this function does.

Suggested-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Ye Xingchen <ye.xingchen@zte.com.cn>
Link: https://lore.kernel.org/r/202302161053360618204@zte.com.cn
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2023-05-08 09:28:31 +02:00
Ye Xingchen 9bf9276f37 reset: axs10x: Use devm_platform_ioremap_resource()
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to Use devm_platform_ioremap_resource(), as this is exactly
what this function does.

Suggested-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Ye Xingchen <ye.xingchen@zte.com.cn>
Link: https://lore.kernel.org/r/202302161050336958071@zte.com.cn
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2023-05-08 09:28:31 +02:00
Ye Xingchen 41ccb3a0eb reset: ath79: Use devm_platform_ioremap_resource()
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to Use devm_platform_ioremap_resource(), as this is exactly
what this function does.

Suggested-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Ye Xingchen <ye.xingchen@zte.com.cn>
Link: https://lore.kernel.org/r/202302161049100728015@zte.com.cn
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2023-05-08 09:28:30 +02:00
Linus Torvalds e81507acdc Nothing looks out of the ordinary in this batch of clk driver updates. There
are a couple patches to the core clk framework, but they're all basically
 cleanups or debugging aids. The driver updates and new additions are dominated
 in the diffstat by Qualcomm and MediaTek drivers. Qualcomm gained a handful of
 new drivers for various SoCs, and MediaTek gained a bunch of drivers for
 MT8188. The MediaTek drivers are being modernized as well, so there are
 updates all over that vendor's clk drivers. There's also a couple other new clk
 drivers in here, for example the Starfive JH7110 SoC support is added.
 
 Outside of the two major SoC vendors though, we have the usual collection of
 non-critical fixes and cleanups to various clk drivers. It's good to see that
 we're getting more cleanups and modernization patches. Maybe one day we'll be
 able to properly split clk providers from clk consumers.
 
 Core:
  - Print an informational message before disabling unused clks
 
 New Drivers:
  - BCM63268 timer clock and reset controller
  - Frequency Hopping (FHCTL) on MediaTek MT6795, MT8173, MT8192 and
    MT8195 SoCs
  - Mediatek MT8188 SoC clk drivers
  - Clock driver for Sunplus SP7021 SoC
  - Clk driver support for Loongson-2 SoCs
  - Clock driver for Skyworks Si521xx I2C PCIe clock generators
  - Initial Starfive JH7110 clk/reset support
  - Global clock controller drivers for Qualcomm SM7150, IPQ9574, MSM8917 and IPQ5332 SoCs
  - GPU clock controller drivers for SM6115, SM6125, SM6375 and SA8775P SoCs
 
 Updates:
  - Shrink size of clk_fractional_divider a little
  - Convert various clk drivers to devm_of_clk_add_hw_provider()
  - Convert platform clk drivers to remove_new()
  - Converted most Mediatek clock drivers to struct platform_driver
  - MediaTek clock drivers can be built as modules
  - Reimplement Loongson-1 clk driver with DT support
  - Migrate socfpga clk driver to of_clk_add_hw_provider()
  - Support for i3c clks on Aspeed ast2600 SoCs
  - Add clock generic devm_clk_hw_register_gate_parent_data
  - Add audiomix block control for i.MX8MP
  - Add support for determine_rate to i.MX composite-8m
  - Let the LCDIF Pixel clock of i.MX8MM and i.MX8MN set parent rate
  - Provide clock name in error message for clk-gpr-mux on get parent failure
  - Drop duplicate imx_clk_mux_flags macro
  - Register the i.MX8MP Media Disp2 Pix clock as bus clock
  - Add Media LDB root clock to i.MX8MP
  - Make i.MX8MP nand_usdhc_bus clock as non-critical
  - Fix the rate table for i.MX fracn-gppll
  - Disable HW control for the fracn-gppll in order to be controlled by
    register write
  - Add support for interger PLL in fracn-gppll
  - Add mcore_booted module parameter to i.MX93 provider
  - Add NIC, A55 and ARM PLL clocks to i.MX93
  - Fix i.MX8ULP XBAR_DIVBUS and AD_SLOW clock parents
  - Use "divider closest" clock type for PLL4_PFD dividers on i.MX8ULP to
    get more accurate clock rates
  - Mark the MU0_Bi and TPM5 clocks on i.MX8ULP as critical
  - Update some of the i.MX critical clocks flags to allow glitchless
    on-the-fly rate change.
  - Add I2C5 clock on Renesas R-Car V3H
  - Exynos850: Add CMU_G3D clock controller for the Mali GPU
  - Extract Exynos5433 (ARM64) clock controller power management code to
    common driver parts
  - Exynos850: make PMU_ALIVE_PCLK clock critical
  - Add Audio, thermal, camera (CSI-2), Image Signal Processor/Channel
    Selector (ISPCS), and video capture (VIN) clocks on Renesas R-Car V4H
  - Add video capture (VIN) clocks on Renesas R-Car V3H
  - Add Cortex-A53 System CPU (Z2) clocks on Renesas R-Car V3M and V3H
  - Support for Stromer Plus PLL on Qualcomm IPQ5332
  - Add a missing reset to Qualcomm QCM2290
  - Migrate Qualcomm IPQ4019 to clk_parent_data
  - Make USB GDSCs enter retention state when disabled on Qualcomm SM6375,
    MSM8996 and MSM8998 SoCs
  - Set floor rounding clk_ops for Qualcomm QCM2290 SDCC2 clk
  - Add two EMAC GDSCs on Qualcomm SC8280XP
  - Use shared rcg clk ops in Qualcomm SM6115 GCC
  - Park Qualcomm SM8350 PCIe PIPE clks when disabled
  - Add GDSCs to Qualcomm SC7280 LPASS audio clock controller
  - Add missing XO clocks to Qualcomm MSM8226 and MSM8974
  - Convert some Qualcomm clk DT bindings to YAML
  - Reparenting fix for the clock supplying camera modules on Rockchip rk3399
  - Mark more critical (bus-)clocks on Rockchip rk3588
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAmRMbQURHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSUvyw//Vcqg0h8s+9npz0JsW+nffAXRguy1jum6
 tj10++zA+NBhKxmfhyOs/v9UK1nb2DXAhcTIjUDcTDkVy0b2pBUQoGEGMyy9TLve
 q4MfWx7CwKwASUG2Lr3f1n4qi/vT4PEDlvYzUO94p7c6Y6f6P4JHTCJlJR7cNb4o
 MyXgiXMxQGaxT0XucSR9J32VxqSbF9KQvb8q+tPV3CDMIWi96aO5ZyewY6KF8a/7
 chdXKYQXaYYG4/q4lNjZuvNQ2jidWqp0NlNw7M96U7SK5ESBryk4B4d1/J+QtzxX
 cuBTF1eoTKYlS3kPhhsuOhbsDi2SFE6D75ps5i9Y57ezSdS9qFcUsaNzUiN6t9ng
 uW+MRBTz20JDKBTLk6vD75O63fVDg3KG+kkLaF0Ax1Xa99sbrgBdNkPQ0Iu2AbSh
 assUmbz3s9MaPWj8LpOKLmactm4GbrQ2wtCEjguuynjaFoPUuyunReNkZ1yxfUUl
 MjRIYpvqVvYp29xHlBjN2cgttHjqVCBg8y7Io6RQonbIvnuN7Zo2cu+vbF7w7mdR
 2HtGBe/OFsnZmmsr0pIGQOU25otheIHPudEYLlXEKx03FaMzAXnnDe9f6xXWaWxk
 Wz0YBofejlkP9ycLjRas2BZo3T66TtAlbQH2UhrSpJZV02Jwfi+JwBaLi9dOwZ7O
 VL5HI5FSlG8=
 =bTtL
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "Nothing looks out of the ordinary in this batch of clk driver updates.

  There are a couple patches to the core clk framework, but they're all
  basically cleanups or debugging aids. The driver updates and new
  additions are dominated in the diffstat by Qualcomm and MediaTek
  drivers. Qualcomm gained a handful of new drivers for various SoCs,
  and MediaTek gained a bunch of drivers for MT8188. The MediaTek
  drivers are being modernized as well, so there are updates all over
  that vendor's clk drivers. There's also a couple other new clk drivers
  in here, for example the Starfive JH7110 SoC support is added.

  Outside of the two major SoC vendors though, we have the usual
  collection of non-critical fixes and cleanups to various clk drivers.
  It's good to see that we're getting more cleanups and modernization
  patches. Maybe one day we'll be able to properly split clk providers
  from clk consumers.

  Core:
   - Print an informational message before disabling unused clks

  New Drivers:
   - BCM63268 timer clock and reset controller
   - Frequency Hopping (FHCTL) on MediaTek MT6795, MT8173, MT8192 and
     MT8195 SoCs
   - Mediatek MT8188 SoC clk drivers
   - Clock driver for Sunplus SP7021 SoC
   - Clk driver support for Loongson-2 SoCs
   - Clock driver for Skyworks Si521xx I2C PCIe clock generators
   - Initial Starfive JH7110 clk/reset support
   - Global clock controller drivers for Qualcomm SM7150, IPQ9574,
     MSM8917 and IPQ5332 SoCs
   - GPU clock controller drivers for SM6115, SM6125, SM6375 and SA8775P
     SoCs

  Updates:
   - Shrink size of clk_fractional_divider a little
   - Convert various clk drivers to devm_of_clk_add_hw_provider()
   - Convert platform clk drivers to remove_new()
   - Converted most Mediatek clock drivers to struct platform_driver
   - MediaTek clock drivers can be built as modules
   - Reimplement Loongson-1 clk driver with DT support
   - Migrate socfpga clk driver to of_clk_add_hw_provider()
   - Support for i3c clks on Aspeed ast2600 SoCs
   - Add clock generic devm_clk_hw_register_gate_parent_data
   - Add audiomix block control for i.MX8MP
   - Add support for determine_rate to i.MX composite-8m
   - Let the LCDIF Pixel clock of i.MX8MM and i.MX8MN set parent rate
   - Provide clock name in error message for clk-gpr-mux on get parent
     failure
   - Drop duplicate imx_clk_mux_flags macro
   - Register the i.MX8MP Media Disp2 Pix clock as bus clock
   - Add Media LDB root clock to i.MX8MP
   - Make i.MX8MP nand_usdhc_bus clock as non-critical
   - Fix the rate table for i.MX fracn-gppll
   - Disable HW control for the fracn-gppll in order to be controlled by
     register write
   - Add support for interger PLL in fracn-gppll
   - Add mcore_booted module parameter to i.MX93 provider
   - Add NIC, A55 and ARM PLL clocks to i.MX93
   - Fix i.MX8ULP XBAR_DIVBUS and AD_SLOW clock parents
   - Use "divider closest" clock type for PLL4_PFD dividers on i.MX8ULP
     to get more accurate clock rates
   - Mark the MU0_Bi and TPM5 clocks on i.MX8ULP as critical
   - Update some of the i.MX critical clocks flags to allow glitchless
     on-the-fly rate change.
   - Add I2C5 clock on Renesas R-Car V3H
   - Exynos850: Add CMU_G3D clock controller for the Mali GPU
   - Extract Exynos5433 (ARM64) clock controller power management code
     to common driver parts
   - Exynos850: make PMU_ALIVE_PCLK clock critical
   - Add Audio, thermal, camera (CSI-2), Image Signal Processor/Channel
     Selector (ISPCS), and video capture (VIN) clocks on Renesas R-Car
     V4H
   - Add video capture (VIN) clocks on Renesas R-Car V3H
   - Add Cortex-A53 System CPU (Z2) clocks on Renesas R-Car V3M and V3H
   - Support for Stromer Plus PLL on Qualcomm IPQ5332
   - Add a missing reset to Qualcomm QCM2290
   - Migrate Qualcomm IPQ4019 to clk_parent_data
   - Make USB GDSCs enter retention state when disabled on Qualcomm
     SM6375, MSM8996 and MSM8998 SoCs
   - Set floor rounding clk_ops for Qualcomm QCM2290 SDCC2 clk
   - Add two EMAC GDSCs on Qualcomm SC8280XP
   - Use shared rcg clk ops in Qualcomm SM6115 GCC
   - Park Qualcomm SM8350 PCIe PIPE clks when disabled
   - Add GDSCs to Qualcomm SC7280 LPASS audio clock controller
   - Add missing XO clocks to Qualcomm MSM8226 and MSM8974
   - Convert some Qualcomm clk DT bindings to YAML
   - Reparenting fix for the clock supplying camera modules on Rockchip
     rk3399
   - Mark more critical (bus-)clocks on Rockchip rk3588"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (290 commits)
  clk: qcom: gcc-sc8280xp: Add EMAC GDSCs
  clk: starfive: Delete the redundant dev_set_drvdata() in JH7110 clock drivers
  clk: rockchip: rk3588: make gate linked clocks critical
  clk: qcom: dispcc-qcm2290: Remove inexistent DSI1PHY clk
  clk: qcom: add the GPUCC driver for sa8775p
  dt-bindings: clock: qcom: describe the GPUCC clock for SA8775P
  clk: qcom: gcc-sm8350: fix PCIe PIPE clocks handling
  clk: qcom: lpassaudiocc-sc7280: Add required gdsc power domain clks in lpass_cc_sc7280_desc
  clk: qcom: lpasscc-sc7280: Skip qdsp6ss clock registration
  dt-bindings: clock: qcom,sc7280-lpasscc: Add qcom,adsp-pil-mode property
  clk: starfive: Avoid casting iomem pointers
  clk: microchip: fix potential UAF in auxdev release callback
  clk: qcom: rpm: Use managed `of_clk_add_hw_provider()`
  clk: mediatek: fhctl: Mark local variables static
  clk: sifive: make SiFive clk drivers depend on ARCH_ symbols
  clk: uniphier: Use managed `of_clk_add_hw_provider()`
  clk: si5351: Use managed `of_clk_add_hw_provider()`
  clk: si570: Use managed `of_clk_add_hw_provider()`
  clk: si514: Use managed `of_clk_add_hw_provider()`
  clk: lmk04832: Use managed `of_clk_add_hw_provider()`
  ...
2023-04-29 17:29:39 -07:00
Stephen Boyd d1aae06630 clk: starfive: Avoid casting iomem pointers
Let's use a wrapper struct for the auxiliary_device made in
jh7110_reset_controller_register() so that we can stop casting iomem
pointers. The casts trip up tools like sparse, and make for some awkward
casts that are largely unnecessary. While we're here, change the
allocation from devm and actually free the auxiliary_device memory in
the release function. This avoids any use after free problems where the
parent device driver is unbound from the device but the
auxiliuary_device is still in use accessing devm freed memory.

Cc: Tommaso Merciai <tomm.merciai@gmail.com>
Cc: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Cc: Hal Feng <hal.feng@starfivetech.com>
Cc: Conor Dooley <conor.dooley@microchip.com>
Cc: Xingyu Wu <xingyu.wu@starfivetech.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Fixes: edab7204af ("clk: starfive: Add StarFive JH7110 system clock driver")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20230413205528.4044216-1-sboyd@kernel.org
2023-04-13 15:45:46 -07:00
Nick Alcock 39b8452f91 reset: mpfs: remove MODULE_LICENSE in non-modules
Since commit 8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.

So remove it in the files in this commit, none of which can be built as
modules.

Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: linux-modules@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: Conor Dooley <conor.dooley@microchip.com>
Cc: Daire McNamara <daire.mcnamara@microchip.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: linux-riscv@lists.infradead.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-04-13 13:13:53 -07:00
Nick Alcock 7bd57c5a98 reset: lantiq: remove MODULE_LICENSE in non-modules
Since commit 8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.

So remove it in the files in this commit, none of which can be built as
modules.

Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: linux-modules@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-04-13 13:13:53 -07:00
Nick Alcock c9698fd5b4 reset: mchp: sparx5: remove MODULE_LICENSE in non-modules
Since commit 8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.

So remove it in the files in this commit, none of which can be built as
modules.

Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: linux-modules@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Lars Povlsen <lars.povlsen@microchip.com>
Cc: Steen Hegelund <Steen.Hegelund@microchip.com>
Cc: Daniel Machon <daniel.machon@microchip.com>
Cc: UNGLinuxDriver@microchip.com
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-04-13 13:13:53 -07:00
Hal Feng 82327b127d reset: starfive: Add StarFive JH7110 reset driver
Add auxiliary driver to support StarFive JH7110 system
and always-on resets.

Tested-by: Tommaso Merciai <tomm.merciai@gmail.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2023-04-05 15:44:23 +01:00
Emil Renner Berthing b6d7406cd7 reset: starfive: jh71x0: Use 32bit I/O on 32bit registers
We currently use 64bit I/O on the 32bit registers. This works because
there are an even number of assert and status registers, so they're only
ever accessed in pairs on 64bit boundaries.

There are however other reset controllers for audio and video on the
JH7100 SoC with only one status register that isn't 64bit aligned so
64bit I/O results in an unaligned access exception.

Switch to 32bit I/O in preparation for supporting these resets too.

Tested-by: Tommaso Merciai <tomm.merciai@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2023-04-05 15:44:07 +01:00
Emil Renner Berthing 0333103ee9 reset: starfive: Rename "jh7100" to "jh71x0" for the common code
For the common code will be shared with the StarFive JH7110 SoC.

Tested-by: Tommaso Merciai <tomm.merciai@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2023-04-05 15:44:02 +01:00
Emil Renner Berthing ed36fcd160 reset: starfive: Extract the common JH71X0 reset code
Extract the common JH71X0 reset code for reusing them to
support JH7110 SoC.

Tested-by: Tommaso Merciai <tomm.merciai@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2023-04-05 15:43:57 +01:00
Emil Renner Berthing 1ec3d20e4e reset: starfive: Factor out common JH71X0 reset code
The StarFive JH7100 SoC has additional reset controllers for audio and
video, but the registers follow the same structure. On the JH7110 the
reset registers don't get their own memory range, but instead follow the
clock control registers. The registers still follow the same structure
though, so let's factor out the common code to handle all these cases.

Tested-by: Tommaso Merciai <tomm.merciai@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2023-04-05 15:43:53 +01:00
Emil Renner Berthing 69bfec7548 reset: Create subdirectory for StarFive drivers
This moves the StarFive JH7100 reset driver to a new subdirectory in
preparation for adding more StarFive reset drivers.

Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Tommaso Merciai <tomm.merciai@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2023-04-05 15:43:49 +01:00
Hal Feng c49a757a5a reset: starfive: Replace SOC_STARFIVE with ARCH_STARFIVE
Using ARCH_FOO symbol is preferred than SOC_FOO.

Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2023-04-05 15:43:45 +01:00
Hui Tang 3a2390c677 reset: uniphier-glue: Fix possible null-ptr-deref
It will cause null-ptr-deref when resource_size(res) invoked,
if platform_get_resource() returns NULL.

Fixes: 499fef09a3 ("reset: uniphier: add USB3 core reset control")
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Reviewed-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20221114004958.258513-1-tanghui20@huawei.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2023-01-03 11:30:46 +01:00
Randy Dunlap 13678f3feb reset: ti-sci: honor TI_SCI_PROTOCOL setting when not COMPILE_TEST
There is a build error when COMPILE_TEST=y, TI_SCI_PROTOCOL=m,
and RESET_TI_SCI=y:

drivers/reset/reset-ti-sci.o: in function `ti_sci_reset_probe':
reset-ti-sci.c:(.text+0x22c): undefined reference to `devm_ti_sci_get_handle'

Fix this by making RESET_TI_SCI honor the Kconfig setting of
TI_SCI_PROTOCOL when COMPILE_TEST is not set. When COMPILE_TEST is set,
TI_SCI_PROTOCOL must be disabled (=n).

Fixes: a6af504184 ("reset: ti-sci: Allow building under COMPILE_TEST")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Tero Kristo <kristo@kernel.org>
Cc: Santosh Shilimkar <ssantosh@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20221030055636.3139-1-rdunlap@infradead.org
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2023-01-03 11:29:33 +01:00
Linus Torvalds bdc753c7fc Here's the main clk pull request for this merge window. We have some
late breaking reports that a patch series to rework clk rate range
 support broke boot on some devices, so I've left that branch out of this
 PR. Hopefully we can get to that next week, or punt on it and let it
 bake another cycle. That means we don't really have any changes to the
 core framework this time around besides a few typo fixes. Instead this
 is all clk driver updates and fixes.
 
 The usual suspects are here (again), with Qualcomm dominating the
 diffstat. We look to have gained support for quite a few new Qualcomm
 SoCs and Dmitry worked on updating many of the existing Qualcomm drivers
 to use clk_parent_data. After that we have MediaTek drivers getting some
 much needed updates, in particular to support GPU DVFS. There are also
 quite a few Samsung clk driver patches, but that's mostly because there
 was a maintainer change and so last release we missed some of those
 patches.
 
 Overall things look normal, but I'm slowly reviewing core framework code
 nowadays and that shows given the rate range patches had to be yanked
 last minute. Let's hope this situation changes soon.
 
 New Drivers:
  - Support for Renesas VersaClock7 clock generator family
  - Add Spreadtrum UMS512 SoC clk support
  - New clock drivers for MediaTek Helio X10 MT6795
  - Display clks for Qualcomm SM6115, SM8450
  - GPU clks for Qualcomm SC8280XP
  - Qualcomm MSM8909 and SM6375 global and SMD RPM clk drivers
 
 Deleted Drivers:
  - Remove DaVinci DM644x and DM646x clk driver support
 
 Updates:
  - Convert Baikal-T1 CCU driver to platform driver
  - Split reset support out of primary Baikal-T1 CCU driver
  - Add some missing clks required for RPiVid Video Decoder on RaspberryPi
  - Mark PLLC critical on bcm2835
  - More devm helpers for fixed rate registration
  - Various PXA168 clk driver fixes
  - Add resets for MediaTek MT8195 PCIe and USB
  - Miscellaneous of_node_put() fixes
  - Nuke dt-bindings/clk path (again) by moving headers to dt-bindings/clock
  - Convert gpio-clk-gate binding to YAML
  - Various fixes to AMD/Xilinx Zynqmp clk driver
  - Graduate AMD/Xilinx "clocking wizard" driver from staging
  - Add missing DPI1_HDMI clock in MT8195 VDOSYS1
  - Clock driver changes to support GPU DVFS on MT8183, MT8192, MT8195
    - Fix GPU clock topology on MT8195
    - Propogate rate changes from GPU clock gate up the tree
    - Clock mux notifiers for GPU-related PLLs
  - Conversion of more "simple" drivers to mtk_clk_simple_probe()
  - Hook up mtk_clk_simple_remove() for "simple" MT8192 clock drivers
  - Fixes to previous |struct clk| to |struct clk_hw| conversion on MediaTek
  - Shrink MT8192 clock driver by deduplicating clock parent lists
  - Change order between 'sim_enet_root_clk' and 'enet_qos_root_clk'
    clocks for i.MX8MP
  - Drop unnecessary newline in i.MX8MM dt-bindings
  - Add more MU1 and SAI clocks dt-bindings Ids
  - Introduce slice busy bit check for i.MX93 composite clock
  - Introduce white list bit check for i.MX93 composite clock
  - Add new i.MX93 clock gate
  - Add MU1 and MU2 clocks to i.MX93 clock provider
  - Add SAI IPG clocks to i.MX93 clock provider
  - add generic clocks for U(S)ART available on SAMA5D2 SoCs
  - reset controller support for Polarfire clocks
  - .round_rate and .set rate support for clk-mpfs
  - code cleanup for clk-mpfs
  - PLL support for PolarFire SoC's Clock Conditioning Circuitry
  - Add watchdog, I2C, pin control/GPIO, and Ethernet clocks on R-Car V4H
  - Add SDHI, Timer (CMT/TMU), and SPI (MSIOF) clocks on R-Car S4-8
  - Add I2C clocks and resets on RZ/V2M
  - Document clock support for the RZ/Five SoC
  - mux-variant clock using the table variant to select parents
  - clock controller for the rv1126 soc
  - conversion of rk3128 to yaml and relicensing of the yaml bindings
    to gpl2+MIT (following dt-binding guildelines)
  - Exynos7885: add FSYS, TREX and MFC clock controllers
  - Exynos850: add IS and AUD (audio) clock controllers with bindings
  - ExynosAutov9: add FSYS clock controllers with bindings
  - ExynosAutov9: correct clock IDs in bindings of Peric 0 and 1 clock
    controllers, due to duplicated entries.  This is an acceptable ABI
    break: recently developed/added platform so without legacies, acked
    by known users/developers
  - ExynosAutov9: add few missing Peric 0/1 gates
  - ExynosAutov9: correct register offsets of few Peric 0/1 clocks
  - Minor code improvements (use of_device_get_match_data() helper, code
    style)
  - Add Krzysztof Kozlowski as co-maintainer of Samsung SoC clocks, as he
    already maintainers that architecture/platform
  - Keep Qualcomm GDSCs enabled when PWRSTS_RET flag is there, solving retention
    issues during suspend of USB on Qualcomm sc7180/sc7280 and SC8280XP
  - Qualcomm SM6115 and QCM2260 are moved to reuse PLL configuration
  - Qualcomm SDM660 SDCC1 moved to floor clk ops
  - Support for the APCS PLLs for Qualcomm IPQ8064, IPQ8074 and IPQ6018 was
    added/fixed
  - The Qualcomm MSM8996 CPU clocks are updated with support for ACD
  - Support for Qualcomm SDM670 GCC and RPMh clks was added
  - Transition to parent_data, parent_hws and use of ARRAY_SIZE() for
    num_parents was done for many Qualcomm SoCs
  - Support for per-reset defined delay on Qualcomm was introduced
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAmM/trwRHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSUEoA/+LiftbrF8Xtu7lGdxRjqLzRftUmHaUQWO
 d0cadtzMsgxzFJsxp99IiJBVJoaYCBOGlnZDx8p/JGv+mmdhl5+yHgKQbR8nEmTk
 5A+bdA1okOdm8SPBPMcLvuMjsgmx+DHkuxvnC2hT8ZGfQDoa+6PnObpP30LJkHT0
 oVY8g8ScEuHI5eJcNz3UgxAetKeJd+WRQPxKCrjsOeyhWuNAJ7wdTVQjjzH49X4C
 RS3fjeHvhr2VZm23IgildY++a6hPO72gtBjEpDRoFwnmWAVqUtxiwptoJJNkC5kB
 toD/ndQHOLh/XOJFKgksS20L4JHtSp5F3Ma8sIuOjAXmDCyqMdTQhydnl5Pyrow+
 ct8BMUGkx0Sw8pXBJYINtHpwTtIxvLu/sBNqBb/lRCWd8byrPlUnKvF/COcoxp27
 miZTwJI28fHU5a2K/46iWZCI5YUvVcnBSz8WbEWWvOltIT8S0JvZozA3KuRm5vys
 /k2HaQwO2I0QWQzPjfg6SRlTTWH6p+Hc47fSg7LSM6Scsb7ZraajTM2QOvgn7Mgp
 m/136q7jr9mvuLqqy1fBY3F2hDZYNSJX+UfmIFcpCyxvht0GVFN9YCc+Ibgyl2vQ
 P3b9LXV2OqhtDJg6ds7v8aPgAGUwUFO8GTPBG1cuom7z5u/kdIpjKaFAyr8wWSuJ
 wqPIFevggsA=
 =9jI+
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "We have some late breaking reports that a patch series to rework clk
  rate range support broke boot on some devices, so I've left that
  branch out of this. Hopefully we can get to that next week, or punt on
  it and let it bake another cycle. That means we don't really have any
  changes to the core framework this time around besides a few typo
  fixes. Instead this is all clk driver updates and fixes.

  The usual suspects are here (again), with Qualcomm dominating the
  diffstat. We look to have gained support for quite a few new Qualcomm
  SoCs and Dmitry worked on updating many of the existing Qualcomm
  drivers to use clk_parent_data. After that we have MediaTek drivers
  getting some much needed updates, in particular to support GPU DVFS.
  There are also quite a few Samsung clk driver patches, but that's
  mostly because there was a maintainer change and so last release we
  missed some of those patches.

  Overall things look normal, but I'm slowly reviewing core framework
  code nowadays and that shows given the rate range patches had to be
  yanked last minute. Let's hope this situation changes soon.

  New Drivers:
   - Support for Renesas VersaClock7 clock generator family
   - Add Spreadtrum UMS512 SoC clk support
   - New clock drivers for MediaTek Helio X10 MT6795
   - Display clks for Qualcomm SM6115, SM8450
   - GPU clks for Qualcomm SC8280XP
   - Qualcomm MSM8909 and SM6375 global and SMD RPM clk drivers

  Deleted Drivers:
   - Remove DaVinci DM644x and DM646x clk driver support

  Updates:
   - Convert Baikal-T1 CCU driver to platform driver
   - Split reset support out of primary Baikal-T1 CCU driver
   - Add some missing clks required for RPiVid Video Decoder on
     RaspberryPi
   - Mark PLLC critical on bcm2835
   - More devm helpers for fixed rate registration
   - Various PXA168 clk driver fixes
   - Add resets for MediaTek MT8195 PCIe and USB
   - Miscellaneous of_node_put() fixes
   - Nuke dt-bindings/clk path (again) by moving headers to
     dt-bindings/clock
   - Convert gpio-clk-gate binding to YAML
   - Various fixes to AMD/Xilinx Zynqmp clk driver
   - Graduate AMD/Xilinx "clocking wizard" driver from staging
   - Add missing DPI1_HDMI clock in MT8195 VDOSYS1
   - Clock driver changes to support GPU DVFS on MT8183, MT8192, MT8195
   - Fix GPU clock topology on MT8195
   - Propogate rate changes from GPU clock gate up the tree
   - Clock mux notifiers for GPU-related PLLs
   - Conversion of more "simple" drivers to mtk_clk_simple_probe()
   - Hook up mtk_clk_simple_remove() for "simple" MT8192 clock drivers
   - Fixes to previous |struct clk| to |struct clk_hw| conversion on
     MediaTek
   - Shrink MT8192 clock driver by deduplicating clock parent lists
   - Change order between 'sim_enet_root_clk' and 'enet_qos_root_clk'
     clocks for i.MX8MP
   - Drop unnecessary newline in i.MX8MM dt-bindings
   - Add more MU1 and SAI clocks dt-bindings Ids
   - Introduce slice busy bit check for i.MX93 composite clock
   - Introduce white list bit check for i.MX93 composite clock
   - Add new i.MX93 clock gate
   - Add MU1 and MU2 clocks to i.MX93 clock provider
   - Add SAI IPG clocks to i.MX93 clock provider
   - add generic clocks for U(S)ART available on SAMA5D2 SoCs
   - reset controller support for Polarfire clocks
   - .round_rate and .set rate support for clk-mpfs
   - code cleanup for clk-mpfs
   - PLL support for PolarFire SoC's Clock Conditioning Circuitry
   - Add watchdog, I2C, pin control/GPIO, and Ethernet clocks on R-Car
     V4H
   - Add SDHI, Timer (CMT/TMU), and SPI (MSIOF) clocks on R-Car S4-8
   - Add I2C clocks and resets on RZ/V2M
   - Document clock support for the RZ/Five SoC
   - mux-variant clock using the table variant to select parents
   - clock controller for the rv1126 soc
   - conversion of rk3128 to yaml and relicensing of the yaml bindings
     to gpl2+MIT (following dt-binding guildelines)
   - Exynos7885: add FSYS, TREX and MFC clock controllers
   - Exynos850: add IS and AUD (audio) clock controllers with bindings
   - ExynosAutov9: add FSYS clock controllers with bindings
   - ExynosAutov9: correct clock IDs in bindings of Peric 0 and 1 clock
     controllers, due to duplicated entries. This is an acceptable ABI
     break: recently developed/added platform so without legacies, acked
     by known users/developers
   - ExynosAutov9: add few missing Peric 0/1 gates
   - ExynosAutov9: correct register offsets of few Peric 0/1 clocks
   - Minor code improvements (use of_device_get_match_data() helper,
     code style)
   - Add Krzysztof Kozlowski as co-maintainer of Samsung SoC clocks, as
     he already maintainers that architecture/platform
   - Keep Qualcomm GDSCs enabled when PWRSTS_RET flag is there, solving
     retention issues during suspend of USB on Qualcomm sc7180/sc7280
     and SC8280XP
   - Qualcomm SM6115 and QCM2260 are moved to reuse PLL configuration
   - Qualcomm SDM660 SDCC1 moved to floor clk ops
   - Support for the APCS PLLs for Qualcomm IPQ8064, IPQ8074 and IPQ6018
     was added/fixed
   - The Qualcomm MSM8996 CPU clocks are updated with support for ACD
   - Support for Qualcomm SDM670 GCC and RPMh clks was added
   - Transition to parent_data, parent_hws and use of ARRAY_SIZE() for
     num_parents was done for many Qualcomm SoCs
   - Support for per-reset defined delay on Qualcomm was introduced"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (283 commits)
  clk: qcom: gcc-sm6375: Ensure unsigned long type
  clk: qcom: gcc-sm6375: Remove unused variables
  clk: qcom: kpss-xcc: convert to parent data API
  clk: introduce (devm_)hw_register_mux_parent_data_table API
  clk: allow building lan966x as a module
  clk: clk-xgene: simplify if-if to if-else
  clk: ast2600: BCLK comes from EPLL
  clk: clocking-wizard: Depend on HAS_IOMEM
  clk: clocking-wizard: Use dev_err_probe() helper
  clk: nxp: fix typo in comment
  clk: pxa: add a check for the return value of kzalloc()
  clk: vc5: Add support for IDT/Renesas VersaClock 5P49V6975
  dt-bindings: clock: vc5: Add 5P49V6975
  clk: mvebu: armada-37xx-tbg: Remove the unneeded result variable
  clk: ti: dra7-atl: Fix reference leak in of_dra7_atl_clk_probe
  clk: Renesas versaclock7 ccf device driver
  dt-bindings: Renesas versaclock7 device tree bindings
  clk: ti: Balance of_node_get() calls for of_find_node_by_name()
  clk: imx: scu: fix memleak on platform_device_add() fails
  clk: vc5: Use regmap_{set,clear}_bits() where appropriate
  ...
2022-10-08 10:06:48 -07:00
Linus Torvalds ff6862c23d ARM: driver updates for 6.1
The drivers branch for 6.1 is a bit larger than for most releases.  Most
 of the changes come from SoC maintainers for the drivers/soc subsystem:
 
  - A new driver for error handling on the NVIDIA Tegra
    'control backbone' bus.
 
  - A new driver for Qualcomm LLCC/DDR bandwidth measurement
 
  - New Rockchip rv1126 and rk3588 power domain drivers
 
  - DT binding updates for memory controllers, older Rockchip
    SoCs, various Mediatek devices, Qualcomm SCM firmware
 
  - Minor updates to Hisilicon LPC bus, the Allwinner SRAM
    driver, the Apple rtkit firmware driver, Tegra firmware
 
  - Minor updates for SoC drivers (Samsung, Mediatek, Renesas,
    Tegra, Qualcomm, Broadcom, NXP, ...)
 
 There are also some separate subsystem with downstream maintainers that
 merge updates this way:
 
  - Various updates and new drivers in the memory controller
    subsystem for Mediatek and Broadcom SoCs
 
  - Small set of changes in preparation to add support for FF-A
    v1.1 specification later, in the Arm FF-A firmware subsystem
 
  - debugfs support in the PSCI firmware subsystem
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmM+j54ACgkQmmx57+YA
 GNkK1Q//fSzCHUPNTrZKJi8mRtp/32Nrpav3eorMZWltKnYbYQyhqH/LCuSZJfe/
 rmGYFxsH6DHEgfHqqyzm6PNC0S4Hle6KiB5xnqXrTgqciPuSg4Fa9OMQgkbiQF6x
 uB2KR+TouQA3MssQh6NW4wy5XAkEqudZCSnEyOTJTmdpepZd/1Eu2Rhn8kx5AYQN
 pzYNGURRoirgYbO9vHMssCcpqyGNdR9SWXcOkROyd65L4LCHQ9JRh4etg7fSXP5j
 abWtTHSOwD8MTXOENOiNw/vyCfBX7wUoJkY2v8OUo3G/20qbOXKWPWi056gyDjVQ
 kJdlnnK4APtiluyBg2alEEZmJOd1iCaVP2j84EO1N4FEek2UGd/lMNOtAOJa+wbh
 eiE6KC5gswe+99//PdY4gB+7dRM3I0gU7FDMl9G5A4DPMEE/0bMKLKk1jR5vyYXl
 6QpN2N0OlU7d16MJiP9RvWf2/xJrcQrLQcy8FKvFVWClJ9wMvBXozKrvXgji9l3I
 ZTW+EViQiyWmj6KbFlDZkYT+Q6YosxaogJUNrZeIaAwmwJj1oTa+M6jYRnFU6uha
 XxG5TrybC9JQ/BpYCTYEqb16LOYALwEm7NWmylWASUCCZclC1u35qmmVEhDyBcS9
 98ePumkAwrcjmW0TZsiYXOCQWNOITuvU/Ku2t/+6Mhg+Xl44zX4=
 =WX9J
 -----END PGP SIGNATURE-----

Merge tag 'arm-drivers-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM driver updates from Arnd Bergmann:
 "The drivers branch for 6.1 is a bit larger than for most releases.

  Most of the changes come from SoC maintainers for the drivers/soc
  subsystem:

   - A new driver for error handling on the NVIDIA Tegra 'control
     backbone' bus.

   - A new driver for Qualcomm LLCC/DDR bandwidth measurement

   - New Rockchip rv1126 and rk3588 power domain drivers

   - DT binding updates for memory controllers, older Rockchip SoCs,
     various Mediatek devices, Qualcomm SCM firmware

   - Minor updates to Hisilicon LPC bus, the Allwinner SRAM driver, the
     Apple rtkit firmware driver, Tegra firmware

   - Minor updates for SoC drivers (Samsung, Mediatek, Renesas, Tegra,
     Qualcomm, Broadcom, NXP, ...)

  There are also some separate subsystem with downstream maintainers
  that merge updates this way:

   - Various updates and new drivers in the memory controller subsystem
     for Mediatek and Broadcom SoCs

   - Small set of changes in preparation to add support for FF-A v1.1
     specification later, in the Arm FF-A firmware subsystem

   - debugfs support in the PSCI firmware subsystem"

* tag 'arm-drivers-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (149 commits)
  ARM: remove check for CONFIG_DEBUG_LL_SER3
  firmware/psci: Add debugfs support to ease debugging
  firmware/psci: Print a warning if PSCI doesn't accept PC mode
  dt-bindings: memory: snps,dw-umctl2-ddrc: Extend schema with IRQs/resets/clocks props
  dt-bindings: memory: snps,dw-umctl2-ddrc: Replace opencoded numbers with macros
  dt-bindings: memory: snps,dw-umctl2-ddrc: Use more descriptive device name
  dt-bindings: memory: synopsys,ddrc-ecc: Detach Zynq DDRC controller support
  soc: sunxi: sram: Add support for the D1 system control
  soc: sunxi: sram: Export the LDO control register
  soc: sunxi: sram: Save a pointer to the OF match data
  soc: sunxi: sram: Return void from the release function
  soc: apple: rtkit: Add apple_rtkit_poll
  soc: imx: add i.MX93 media blk ctrl driver
  soc: imx: add i.MX93 SRC power domain driver
  soc: imx: imx8m-blk-ctrl: Use genpd_xlate_onecell
  soc: imx: imx8mp-blk-ctrl: handle PCIe PHY resets
  soc: imx: imx8m-blk-ctrl: add i.MX8MP VPU blk ctrl
  soc: imx: add i.MX8MP HDMI blk ctrl HDCP/HRV_MWR
  soc: imx: add icc paths for i.MX8MP hsio/hdmi blk ctrl
  soc: imx: add icc paths for i.MX8MP media blk ctrl
  ...
2022-10-06 11:04:57 -07:00
Tomer Maimon ae358d71d4 reset: npcm: fix iprst2 and iprst4 setting
In NPCM8XX USB reset sequence, iprst2 register was set with iprst4 value
and iprst4 register wasn´t set.

This fix sets the correct IP reset values in iprst2 and iprst4 registers
in NPCM8XX USB reset sequence.

Fixes: fc5d2a2f4a ("reset: npcm: Add NPCM8XX support")

Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20220922153856.23326-1-tmaimon77@gmail.com
2022-09-22 17:48:35 +02:00
Conor Dooley 05f9e36370 reset: add polarfire soc reset support
Add support for the resets on Microchip's PolarFire SoC (MPFS).
Reset control is a single register, wedged in between registers for
clock control. To fit with existed DT etc, the reset controller is
created using the aux device framework & set up in the clock driver.

Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220909123123.2699583-6-conor.dooley@microchip.com
2022-09-14 10:55:17 +03:00
Michael Walle 51fd191422 reset: microchip-sparx5: issue a reset on startup
Originally this was used in by the switch core driver to issue a reset.
But it turns out, this isn't just a switch core reset but instead it
will reset almost the complete SoC.

Instead of adding almost all devices of the SoC a shared reset line,
issue the reset once early on startup. Keep the reset controller for
backwards compatibility, but make the actual reset a noop.

Suggested-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Michael Walle <michael@walle.cc>
Tested-by: Steen Hegelund <Steen.Hegelund@microchip.com> on Sparx5
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20220826115607.1148489-2-michael@walle.cc
2022-08-30 16:29:41 +02:00
Richard Zhu 051d9eb403 reset: imx7: Fix the iMX8MP PCIe PHY PERST support
On i.MX7/iMX8MM/iMX8MQ, the initialized default value of PERST bit(BIT3)
of SRC_PCIEPHY_RCR is 1b'1.
But i.MX8MP has one inversed default value 1b'0 of PERST bit.

And the PERST bit should be kept 1b'1 after power and clocks are stable.
So fix the i.MX8MP PCIe PHY PERST support here.

Fixes: e08672c039 ("reset: imx7: Add support for i.MX8MP SoC")
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Marek Vasut <marex@denx.de>
Tested-by: Richard Leitner <richard.leitner@skidata.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/1661845564-11373-5-git-send-email-hongxing.zhu@nxp.com
2022-08-30 16:28:48 +02:00