Граф коммитов

7 Коммитов

Автор SHA1 Сообщение Дата
Eric Biggers 5ab7189a31 fscrypt: require that key be added when setting a v2 encryption policy
By looking up the master keys in a filesystem-level keyring rather than
in the calling processes' key hierarchy, it becomes possible for a user
to set an encryption policy which refers to some key they don't actually
know, then encrypt their files using that key.  Cryptographically this
isn't much of a problem, but the semantics of this would be a bit weird.
Thus, enforce that a v2 encryption policy can only be set if the user
has previously added the key, or has capable(CAP_FOWNER).

We tolerate that this problem will continue to exist for v1 encryption
policies, however; there is no way around that.

Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-08-12 19:18:50 -07:00
Eric Biggers 78a1b96bcf fscrypt: add FS_IOC_REMOVE_ENCRYPTION_KEY_ALL_USERS ioctl
Add a root-only variant of the FS_IOC_REMOVE_ENCRYPTION_KEY ioctl which
removes all users' claims of the key, not just the current user's claim.
I.e., it always removes the key itself, no matter how many users have
added it.

This is useful for forcing a directory to be locked, without having to
figure out which user ID(s) the key was added under.  This is planned to
be used by a command like 'sudo fscrypt lock DIR --all-users' in the
fscrypt userspace tool (http://github.com/google/fscrypt).

Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-08-12 19:18:50 -07:00
Eric Biggers 23c688b540 fscrypt: allow unprivileged users to add/remove keys for v2 policies
Allow the FS_IOC_ADD_ENCRYPTION_KEY and FS_IOC_REMOVE_ENCRYPTION_KEY
ioctls to be used by non-root users to add and remove encryption keys
from the filesystem-level crypto keyrings, subject to limitations.

Motivation: while privileged fscrypt key management is sufficient for
some users (e.g. Android and Chromium OS, where a privileged process
manages all keys), the old API by design also allows non-root users to
set up and use encrypted directories, and we don't want to regress on
that.  Especially, we don't want to force users to continue using the
old API, running into the visibility mismatch between files and keyrings
and being unable to "lock" encrypted directories.

Intuitively, the ioctls have to be privileged since they manipulate
filesystem-level state.  However, it's actually safe to make them
unprivileged if we very carefully enforce some specific limitations.

First, each key must be identified by a cryptographic hash so that a
user can't add the wrong key for another user's files.  For v2
encryption policies, we use the key_identifier for this.  v1 policies
don't have this, so managing keys for them remains privileged.

Second, each key a user adds is charged to their quota for the keyrings
service.  Thus, a user can't exhaust memory by adding a huge number of
keys.  By default each non-root user is allowed up to 200 keys; this can
be changed using the existing sysctl 'kernel.keys.maxkeys'.

Third, if multiple users add the same key, we keep track of those users
of the key (of which there remains a single copy), and won't really
remove the key, i.e. "lock" the encrypted files, until all those users
have removed it.  This prevents denial of service attacks that would be
possible under simpler schemes, such allowing the first user who added a
key to remove it -- since that could be a malicious user who has
compromised the key.  Of course, encryption keys should be kept secret,
but the idea is that using encryption should never be *less* secure than
not using encryption, even if your key was compromised.

We tolerate that a user will be unable to really remove a key, i.e.
unable to "lock" their encrypted files, if another user has added the
same key.  But in a sense, this is actually a good thing because it will
avoid providing a false notion of security where a key appears to have
been removed when actually it's still in memory, available to any
attacker who compromises the operating system kernel.

Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-08-12 19:18:50 -07:00
Eric Biggers 5dae460c22 fscrypt: v2 encryption policy support
Add a new fscrypt policy version, "v2".  It has the following changes
from the original policy version, which we call "v1" (*):

- Master keys (the user-provided encryption keys) are only ever used as
  input to HKDF-SHA512.  This is more flexible and less error-prone, and
  it avoids the quirks and limitations of the AES-128-ECB based KDF.
  Three classes of cryptographically isolated subkeys are defined:

    - Per-file keys, like used in v1 policies except for the new KDF.

    - Per-mode keys.  These implement the semantics of the DIRECT_KEY
      flag, which for v1 policies made the master key be used directly.
      These are also planned to be used for inline encryption when
      support for it is added.

    - Key identifiers (see below).

- Each master key is identified by a 16-byte master_key_identifier,
  which is derived from the key itself using HKDF-SHA512.  This prevents
  users from associating the wrong key with an encrypted file or
  directory.  This was easily possible with v1 policies, which
  identified the key by an arbitrary 8-byte master_key_descriptor.

- The key must be provided in the filesystem-level keyring, not in a
  process-subscribed keyring.

The following UAPI additions are made:

- The existing ioctl FS_IOC_SET_ENCRYPTION_POLICY can now be passed a
  fscrypt_policy_v2 to set a v2 encryption policy.  It's disambiguated
  from fscrypt_policy/fscrypt_policy_v1 by the version code prefix.

- A new ioctl FS_IOC_GET_ENCRYPTION_POLICY_EX is added.  It allows
  getting the v1 or v2 encryption policy of an encrypted file or
  directory.  The existing FS_IOC_GET_ENCRYPTION_POLICY ioctl could not
  be used because it did not have a way for userspace to indicate which
  policy structure is expected.  The new ioctl includes a size field, so
  it is extensible to future fscrypt policy versions.

- The ioctls FS_IOC_ADD_ENCRYPTION_KEY, FS_IOC_REMOVE_ENCRYPTION_KEY,
  and FS_IOC_GET_ENCRYPTION_KEY_STATUS now support managing keys for v2
  encryption policies.  Such keys are kept logically separate from keys
  for v1 encryption policies, and are identified by 'identifier' rather
  than by 'descriptor'.  The 'identifier' need not be provided when
  adding a key, since the kernel will calculate it anyway.

This patch temporarily keeps adding/removing v2 policy keys behind the
same permission check done for adding/removing v1 policy keys:
capable(CAP_SYS_ADMIN).  However, the next patch will carefully take
advantage of the cryptographically secure master_key_identifier to allow
non-root users to add/remove v2 policy keys, thus providing a full
replacement for v1 policies.

(*) Actually, in the API fscrypt_policy::version is 0 while on-disk
    fscrypt_context::format is 1.  But I believe it makes the most sense
    to advance both to '2' to have them be in sync, and to consider the
    numbering to start at 1 except for the API quirk.

Reviewed-by: Paul Crowley <paulcrowley@google.com>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-08-12 19:18:50 -07:00
Eric Biggers 5a7e29924d fscrypt: add FS_IOC_GET_ENCRYPTION_KEY_STATUS ioctl
Add a new fscrypt ioctl, FS_IOC_GET_ENCRYPTION_KEY_STATUS.  Given a key
specified by 'struct fscrypt_key_specifier' (the same way a key is
specified for the other fscrypt key management ioctls), it returns
status information in a 'struct fscrypt_get_key_status_arg'.

The main motivation for this is that applications need to be able to
check whether an encrypted directory is "unlocked" or not, so that they
can add the key if it is not, and avoid adding the key (which may
involve prompting the user for a passphrase) if it already is.

It's possible to use some workarounds such as checking whether opening a
regular file fails with ENOKEY, or checking whether the filenames "look
like gibberish" or not.  However, no workaround is usable in all cases.

Like the other key management ioctls, the keyrings syscalls may seem at
first to be a good fit for this.  Unfortunately, they are not.  Even if
we exposed the keyring ID of the ->s_master_keys keyring and gave
everyone Search permission on it (note: currently the keyrings
permission system would also allow everyone to "invalidate" the keyring
too), the fscrypt keys have an additional state that doesn't map cleanly
to the keyrings API: the secret can be removed, but we can be still
tracking the files that were using the key, and the removal can be
re-attempted or the secret added again.

After later patches, some applications will also need a way to determine
whether a key was added by the current user vs. by some other user.
Reserved fields are included in fscrypt_get_key_status_arg for this and
other future extensions.

Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-08-12 19:18:50 -07:00
Eric Biggers b1c0ec3599 fscrypt: add FS_IOC_REMOVE_ENCRYPTION_KEY ioctl
Add a new fscrypt ioctl, FS_IOC_REMOVE_ENCRYPTION_KEY.  This ioctl
removes an encryption key that was added by FS_IOC_ADD_ENCRYPTION_KEY.
It wipes the secret key itself, then "locks" the encrypted files and
directories that had been unlocked using that key -- implemented by
evicting the relevant dentries and inodes from the VFS caches.

The problem this solves is that many fscrypt users want the ability to
remove encryption keys, causing the corresponding encrypted directories
to appear "locked" (presented in ciphertext form) again.  Moreover,
users want removing an encryption key to *really* remove it, in the
sense that the removed keys cannot be recovered even if kernel memory is
compromised, e.g. by the exploit of a kernel security vulnerability or
by a physical attack.  This is desirable after a user logs out of the
system, for example.  In many cases users even already assume this to be
the case and are surprised to hear when it's not.

It is not sufficient to simply unlink the master key from the keyring
(or to revoke or invalidate it), since the actual encryption transform
objects are still pinned in memory by their inodes.  Therefore, to
really remove a key we must also evict the relevant inodes.

Currently one workaround is to run 'sync && echo 2 >
/proc/sys/vm/drop_caches'.  But, that evicts all unused inodes in the
system rather than just the inodes associated with the key being
removed, causing severe performance problems.  Moreover, it requires
root privileges, so regular users can't "lock" their encrypted files.

Another workaround, used in Chromium OS kernels, is to add a new
VFS-level ioctl FS_IOC_DROP_CACHE which is a more restricted version of
drop_caches that operates on a single super_block.  It does:

        shrink_dcache_sb(sb);
        invalidate_inodes(sb, false);

But it's still a hack.  Yet, the major users of filesystem encryption
want this feature badly enough that they are actually using these hacks.

To properly solve the problem, start maintaining a list of the inodes
which have been "unlocked" using each master key.  Originally this
wasn't possible because the kernel didn't keep track of in-use master
keys at all.  But, with the ->s_master_keys keyring it is now possible.

Then, add an ioctl FS_IOC_REMOVE_ENCRYPTION_KEY.  It finds the specified
master key in ->s_master_keys, then wipes the secret key itself, which
prevents any additional inodes from being unlocked with the key.  Then,
it syncs the filesystem and evicts the inodes in the key's list.  The
normal inode eviction code will free and wipe the per-file keys (in
->i_crypt_info).  Note that freeing ->i_crypt_info without evicting the
inodes was also considered, but would have been racy.

Some inodes may still be in use when a master key is removed, and we
can't simply revoke random file descriptors, mmap's, etc.  Thus, the
ioctl simply skips in-use inodes, and returns -EBUSY to indicate that
some inodes weren't evicted.  The master key *secret* is still removed,
but the fscrypt_master_key struct remains to keep track of the remaining
inodes.  Userspace can then retry the ioctl to evict the remaining
inodes.  Alternatively, if userspace adds the key again, the refreshed
secret will be associated with the existing list of inodes so they
remain correctly tracked for future key removals.

The ioctl doesn't wipe pagecache pages.  Thus, we tolerate that after a
kernel compromise some portions of plaintext file contents may still be
recoverable from memory.  This can be solved by enabling page poisoning
system-wide, which security conscious users may choose to do.  But it's
very difficult to solve otherwise, e.g. note that plaintext file
contents may have been read in other places than pagecache pages.

Like FS_IOC_ADD_ENCRYPTION_KEY, FS_IOC_REMOVE_ENCRYPTION_KEY is
initially restricted to privileged users only.  This is sufficient for
some use cases, but not all.  A later patch will relax this restriction,
but it will require introducing key hashes, among other changes.

Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-08-12 19:18:49 -07:00
Eric Biggers 22d94f493b fscrypt: add FS_IOC_ADD_ENCRYPTION_KEY ioctl
Add a new fscrypt ioctl, FS_IOC_ADD_ENCRYPTION_KEY.  This ioctl adds an
encryption key to the filesystem's fscrypt keyring ->s_master_keys,
making any files encrypted with that key appear "unlocked".

Why we need this
~~~~~~~~~~~~~~~~

The main problem is that the "locked/unlocked" (ciphertext/plaintext)
status of encrypted files is global, but the fscrypt keys are not.
fscrypt only looks for keys in the keyring(s) the process accessing the
filesystem is subscribed to: the thread keyring, process keyring, and
session keyring, where the session keyring may contain the user keyring.

Therefore, userspace has to put fscrypt keys in the keyrings for
individual users or sessions.  But this means that when a process with a
different keyring tries to access encrypted files, whether they appear
"unlocked" or not is nondeterministic.  This is because it depends on
whether the files are currently present in the inode cache.

Fixing this by consistently providing each process its own view of the
filesystem depending on whether it has the key or not isn't feasible due
to how the VFS caches work.  Furthermore, while sometimes users expect
this behavior, it is misguided for two reasons.  First, it would be an
OS-level access control mechanism largely redundant with existing access
control mechanisms such as UNIX file permissions, ACLs, LSMs, etc.
Encryption is actually for protecting the data at rest.

Second, almost all users of fscrypt actually do need the keys to be
global.  The largest users of fscrypt, Android and Chromium OS, achieve
this by having PID 1 create a "session keyring" that is inherited by
every process.  This works, but it isn't scalable because it prevents
session keyrings from being used for any other purpose.

On general-purpose Linux distros, the 'fscrypt' userspace tool [1] can't
similarly abuse the session keyring, so to make 'sudo' work on all
systems it has to link all the user keyrings into root's user keyring
[2].  This is ugly and raises security concerns.  Moreover it can't make
the keys available to system services, such as sshd trying to access the
user's '~/.ssh' directory (see [3], [4]) or NetworkManager trying to
read certificates from the user's home directory (see [5]); or to Docker
containers (see [6], [7]).

By having an API to add a key to the *filesystem* we'll be able to fix
the above bugs, remove userspace workarounds, and clearly express the
intended semantics: the locked/unlocked status of an encrypted directory
is global, and encryption is orthogonal to OS-level access control.

Why not use the add_key() syscall
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We use an ioctl for this API rather than the existing add_key() system
call because the ioctl gives us the flexibility needed to implement
fscrypt-specific semantics that will be introduced in later patches:

- Supporting key removal with the semantics such that the secret is
  removed immediately and any unused inodes using the key are evicted;
  also, the eviction of any in-use inodes can be retried.

- Calculating a key-dependent cryptographic identifier and returning it
  to userspace.

- Allowing keys to be added and removed by non-root users, but only keys
  for v2 encryption policies; and to prevent denial-of-service attacks,
  users can only remove keys they themselves have added, and a key is
  only really removed after all users who added it have removed it.

Trying to shoehorn these semantics into the keyrings syscalls would be
very difficult, whereas the ioctls make things much easier.

However, to reuse code the implementation still uses the keyrings
service internally.  Thus we get lockless RCU-mode key lookups without
having to re-implement it, and the keys automatically show up in
/proc/keys for debugging purposes.

References:

    [1] https://github.com/google/fscrypt
    [2] https://goo.gl/55cCrI#heading=h.vf09isp98isb
    [3] https://github.com/google/fscrypt/issues/111#issuecomment-444347939
    [4] https://github.com/google/fscrypt/issues/116
    [5] https://bugs.launchpad.net/ubuntu/+source/fscrypt/+bug/1770715
    [6] https://github.com/google/fscrypt/issues/128
    [7] https://askubuntu.com/questions/1130306/cannot-run-docker-on-an-encrypted-filesystem

Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-08-12 19:06:13 -07:00