Add support for FTP commands with extended format (RFC 2428):
- FTP EPRT: IPv4 and IPv6, active mode, similar to PORT
- FTP EPSV: IPv4 and IPv6, passive mode, similar to PASV.
EPSV response usually contains only port but we allow real
server to provide different address
We restrict control and data connection to be from same
address family.
Allow the "(" and ")" to be optional in PASV response.
Also, add ipvsh argument to the pkt_in/pkt_out handlers to better
access the payload after transport header.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Prepare NFCT to support IPv6 for FTP:
- Do not restrict the expectation callback to PF_INET
- Split the debug messages, so that the 160-byte limitation
in IP_VS_DBG_BUF is not exceeded when printing many IPv6
addresses. This means no more than 3 addresses in one message,
i.e. 1 tuple with 2 addresses or 1 connection with 3 addresses.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This allows us to forward packets from the netdev family via neighbour
layer, so you don't need an explicit link-layer destination when using
this expression from rules. The ttl/hop_limit field is decremented.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
In the quest to remove all stack VLA usage from the kernel[1], this
allocates the maximum size expected for all possible attrs and adds
sanity-checks at both registration and usage to make sure nothing
gets out of sync.
[1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Some drivers, such as vxlan and wireguard, use the skb's dst in order to
determine things like PMTU. They therefore loose functionality when flow
offloading is enabled. So, we ensure the skb has it before xmit'ing it
in the offloading path.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The following ruleset:
add table ip filter
add chain ip filter input { type filter hook input priority 4; }
add chain ip filter ap
add rule ip filter input jump ap
add rule ip filter ap masquerade
results in a panic, because the masquerade extension should be rejected
from the filter chain. The existing validation is missing a chain
dependency check when the rule is added to the non-base chain.
This patch fixes the problem by walking down the rules from the
basechains, searching for either immediate or lookup expressions, then
jumping to non-base chains and again walking down the rules to perform
the expression validation, so we make sure the full ruleset graph is
validated. This is done only once from the commit phase, in case of
problem, we abort the transaction and perform fine grain validation for
error reporting. This patch requires 003087911a ("netfilter:
nfnetlink: allow commit to fail") to achieve this behaviour.
This patch also adds a cleanup callback to nfnl batch interface to reset
the validate state from the exit path.
As a result of this patch, nf_tables_check_loops() doesn't use
->validate to check for loops, instead it just checks for immediate
expressions.
Reported-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This extends log statement to support the behaviour achieved with
AUDIT target in iptables.
Audit logging is enabled via a pseudo log level 8. In this case any
other settings like log prefix are ignored since audit log format is
fixed.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Now it can only match the transparent flag of an ip/ipv6 socket.
Signed-off-by: Máté Eckl <ecklm94@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
net/netfilter/nft_numgen.c:117:1-3: WARNING: PTR_ERR_OR_ZERO can be used
net/netfilter/nft_hash.c:180:1-3: WARNING: PTR_ERR_OR_ZERO can be used
net/netfilter/nft_hash.c:223:1-3: WARNING: PTR_ERR_OR_ZERO can be used
Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR
Generated by: scripts/coccinelle/api/ptr_ret.cocci
Fixes: b9ccc07e3f ("netfilter: nft_hash: add map lookups for hashing operations")
Fixes: d734a28889 ("netfilter: nft_numgen: add map lookups for numgen statements")
CC: Laura Garcia Liebana <nevola@gmail.com>
Signed-off-by: kbuild test robot <fengguang.wu@intel.com>
Acked-by: Laura Garcia Liebana <nevola@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Fix to return a negative error code from the failover create fail error
handling case instead of 0, as done elsewhere in this function.
Fixes: ba5e4426e8 ("virtio_net: Extend virtio to use VF datapath when available")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the quest to remove all stack VLA usage from the kernel[1], this
allocates the maximum size expected for all possible types and adds
sanity-checks at both registration and usage to make sure nothing gets
out of sync. This matches the proposed VLA solution for nfnetlink[2]. The
values chosen here were based on finding assignments for .maxtype and
.slave_maxtype and manually counting the enums:
slave_maxtype (max 33):
IFLA_BRPORT_MAX 33
IFLA_BOND_SLAVE_MAX 9
maxtype (max 45):
IFLA_BOND_MAX 28
IFLA_BR_MAX 45
__IFLA_CAIF_HSI_MAX 8
IFLA_CAIF_MAX 4
IFLA_CAN_MAX 16
IFLA_GENEVE_MAX 12
IFLA_GRE_MAX 25
IFLA_GTP_MAX 5
IFLA_HSR_MAX 7
IFLA_IPOIB_MAX 4
IFLA_IPTUN_MAX 21
IFLA_IPVLAN_MAX 3
IFLA_MACSEC_MAX 15
IFLA_MACVLAN_MAX 7
IFLA_PPP_MAX 2
__IFLA_RMNET_MAX 4
IFLA_VLAN_MAX 6
IFLA_VRF_MAX 2
IFLA_VTI_MAX 7
IFLA_VXLAN_MAX 28
VETH_INFO_MAX 2
VXCAN_INFO_MAX 2
This additionally changes maxtype and slave_maxtype fields to unsigned,
since they're only ever using positive values.
[1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com
[2] https://patchwork.kernel.org/patch/10439647/
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make it explicit that either device tree is used or platform data. If
neither is available, abort the probe.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 877b7cb0b6 ("net: dsa: mv88e6xxx: Add minimal platform_data support")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On platforms that don't always enable CONFIG_GPIOLIB, we run into
a build failure:
drivers/net/ethernet/ti/cpsw.c: In function 'cpsw_probe':
drivers/net/ethernet/ti/cpsw.c:3006:9: error: implicit declaration of function 'devm_gpiod_get_array_optional' [-Werror=implicit-function-declaration]
mode = devm_gpiod_get_array_optional(&pdev->dev, "mode", GPIOD_OUT_LOW);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/ti/cpsw.c:3006:59: error: 'GPIOD_OUT_LOW' undeclared (first use in this function); did you mean 'GPIOF_INIT_LOW'?
mode = devm_gpiod_get_array_optional(&pdev->dev, "mode", GPIOD_OUT_LOW);
Since we cannot rely on this to be visible from gpio.h, we have to include
gpio/consumer.h directly.
Fixes: 2652113ff0 ("net: ethernet: ti: Allow most drivers with COMPILE_TEST")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Saeed Mahameed says:
====================
Mellanox, mlx5 new device events
The following series is for mlx5-next tree [1], it adds the support of two
new device events, from Ilan Tayari:
1. High temperature warnings.
2. FPGA QP error event.
In case of no objection this series will be applied to mlx5-next tree
and will be sent later as a pull request to both rdma and net trees.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux.git/log/?h=mlx5-next
v1->v2:
- improve commit message of the FPGA QP error event patch.
====================
Acked-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The FPGA queue pair (QP) event fires whenever a QP on the FPGA
transitions to the error state.
At this stage, this event is unrecoverable, it may become recoverable
in the future.
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Adi Nissim <adin@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Temperature warning event is sent by FW to indicate high temperature
as detected by one of the sensors on the board.
Add handling of this event by writing the numbers of the alert sensors
to the kernel log.
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Adi Nissim <adin@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
FRRouting installs routes into the kernel associated with
the originating protocol. Add these values to the well
known values in rtnetlink.h.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add FORCE_PAUSE bit to force local pause settings instead
of using auto negotiated values.
Signed-off-by: Santosh Rastapur <santosh@chelsio.com>
Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata says:
====================
net: bridge: Notify about bridge VLANs
In commit 946a11e740 ("mlxsw: spectrum_span: Allow bridge for gretap
mirror"), mlxsw got support for offloading mirror-to-gretap such that
the underlay packet path involves a bridge. In that case, the offload is
also influenced by PVID setting of said bridge. However, changes to VLAN
configuration of the bridge itself do not generate switchdev
notifications, so there's no mechanism to prod mlxsw to update the
offload when these settings change.
In this patchset, the problem is resolved by distributing the switchdev
notification SWITCHDEV_OBJ_ID_PORT_VLAN also for configuration changes
on bridge VLANs. Since stacked devices distribute the notification to
lower devices, such event eventually reaches the driver, which can
determine whether it's a bridge or port VLAN by inspecting orig_dev.
To keep things consistent, the newly-distributed notifications observe
the same protocol as the existing ones: dual prepare/commit, with
-EOPNOTSUPP indicating lack of support, even though there's currently
nothing to prepare for and nothing to support. Correspondingly, all
switchdev drivers have been updated to return -EOPNOTSUPP for bridge
VLAN notifications.
In patches #1 and #2, the code base is changed to support the following
additions: functions br_switchdev_port_vlan_add() and
br_switchdev_port_vlan_del() are introduced to simplify sending
notifications; and br_vlan_add_existing() is introduced to later make it
simpler to add error-handling code for the case of configuring a
preexisting VLAN on bridge CPU port.
In patches #3-#6, respectively for mlxsw, rocker, DSA and DPAA2 ethsw,
the new notifications (which are not enabled yet) are ignored to
maintain the current behavior.
In patch #7, the notification is actually enabled.
In patch #8, mlxsw is changed to update offloads of mirror-to-gre also
for bridge-related notifications.
Changes from v3 to v4:
- In patch #1, separate variable declarations from program logic.
- Add patch #2.
- In patch #7, add error handling around a newly-introduced call to
br_switchdev_port_vlan_add().
- Rephrase commit messages of patches #3-#6 to explain motivation for
the change.
Changes from v2 to v3:
- Add a fallback definition for br_switchdev_port_obj_add() and
br_switchdev_port_obj_del() when !CONFIG_NET_SWITCHDEV.
Changes from v1 to v2:
- Rename br_switchdev_port_obj_add() and br_switchdev_port_obj_del() to
br_switchdev_port_vlan_add() and br_switchdev_port_vlan_del(), and
move from br_vlan.c to br_switchdev.c.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Since there's no special support for the bridge events, the driver
returns -EOPNOTSUPP, and thus the commit never happens. Therefore
schedule respin during the prepare stage: there's no real difference one
way or another.
This fixes the problem that mirror-to-gretap offload wouldn't adapt to
changes in bridge vlan configuration right away and another notification
would have to arrive for mlxsw to catch up.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A driver might need to react to changes in settings of brentry VLANs.
Therefore send switchdev port notifications for these as well. Reuse
SWITCHDEV_OBJ_ID_PORT_VLAN for this purpose. Listeners should use
netif_is_bridge_master() on orig_dev to determine whether the
notification is about a bridge port or a bridge.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A follow-up patch enables emitting VLAN notifications for the bridge CPU
port in addition to the existing slave port notifications. These
notifications have orig_dev set to the bridge in question.
Because there's no specific support for these VLANs, just ignore the
notifications to maintain the current behavior.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A follow-up patch enables emitting VLAN notifications for the bridge CPU
port in addition to the existing slave port notifications. These
notifications have orig_dev set to the bridge in question.
Because there's no specific support for these VLANs, just ignore the
notifications to maintain the current behavior.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A follow-up patch enables emitting VLAN notifications for the bridge CPU
port in addition to the existing slave port notifications. These
notifications have orig_dev set to the bridge in question.
Because there's no specific support for these VLANs, just ignore the
notifications to maintain the current behavior.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A follow-up patch enables emitting VLAN notifications for the bridge CPU
port in addition to the existing slave port notifications. These
notifications have orig_dev set to the bridge in question.
Because there's no specific support for these VLANs, just ignore the
notifications to maintain the current behavior.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extract the code that deals with adding a preexisting VLAN to bridge CPU
port to a separate function. A follow-up patch introduces a need to roll
back operations in this block due to an error, and this split will make
the error-handling code clearer.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A call to switchdev_port_obj_add() or switchdev_port_obj_del() involves
initializing a struct switchdev_obj_port_vlan, a piece of code that
repeats on each call site almost verbatim. While in the current codebase
there is just one duplicated add call, the follow-up patches add more of
both add and del calls.
Thus to remove the duplication, extract the repetition into named
functions and reuse.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds driver changes for capturing the link change count in
ethtool statistics display.
Please consider applying this to "net-next".
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This series includes mlx5 FPGA and mlx5e netdevice updates:
1) Print FPGA info such as device name, vendor id, etc.., from Ilan Tayari.
2) Abort FPGA if some essential capabilities are not supported, from Yevgeny Kliteynik.
3) Two FPGA dma related minor fixes, from Ilya Lesokhin.
4) Use the right table to report offloaded TC rules, from Or Gerlitz.
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJbDfJhAAoJEEg/ir3gV/o+ab8IAM85ISCSoq0hqMNCHDWS+Tni
ZzM+6nECRPnt+Kivu3lO9K6Lz9Z9s5iBexjCXJTWal+8DYNhGw0o5yZ0lL1cT6DY
vc4Kzvurfx5lXlhDG8ezEZ8MJcHP0KCnAPbovuC5xeVKHQ5xfgmr2NwAl1vqG6ev
15ne6UVexytuylkUCHDTZcPa3HLC0CX2g8e2U+ijJ105L66MR/GTZB+XV6OaFdCg
LAsKSdN6FPUIKbO+Dvpjpoe+5n7fvIvuKOQUEAds6EcqOwCqNREZqdQduCn5VvDw
cOEOcTnxNvBy3R3w59U36LnFDP2NKvTO3a2EWLneujSnp+ypTZ1R8KIATV1i6rk=
=Qe1/
-----END PGP SIGNATURE-----
Merge tag 'mlx5e-updates-2018-05-29' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5e-updates-2018-05-29
This series includes mlx5 FPGA and mlx5e netdevice updates:
1) Print FPGA info such as device name, vendor id, etc.., from Ilan Tayari.
2) Abort FPGA if some essential capabilities are not supported, from Yevgeny Kliteynik.
3) Two FPGA dma related minor fixes, from Ilya Lesokhin.
4) Use the right table to report offloaded TC rules, from Or Gerlitz.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Checking netif_xmit_frozen_or_stopped() at the end of sch_direct_xmit()
is being bypassed. This is because "ret" from sch_direct_xmit() will be
either NETDEV_TX_OK or NETDEV_TX_BUSY, and only ret == NETDEV_TX_OK == 0
will reach the condition:
if (ret && netif_xmit_frozen_or_stopped(txq))
return false;
This patch cleans up the code by removing the whole condition.
For more discussion about this, please refer to
https://marc.info/?t=152727195700008
Signed-off-by: Song Liu <songliubraving@fb.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is additional to the
commit ea1627c20c ("tcp: minor optimizations around tcp_hdr() usage").
At this point, skb->data is same with tcp_hdr() as tcp header has not
been pulled yet. So use the less expensive one to get the tcp header.
Remove the third parameter of tcp_rcv_established() and put it into
the function body.
Furthermore, the local variables are listed as a reverse christmas tree :)
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Added myself as maintainer for QorIQ PTP clock driver.
Since gianfar_ptp.c was renamed to ptp_qoriq.c, let's
maintain it under QorIQ PTP clock driver.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove and coalesce formats when there is an unnecessary
character after a logging newline. These extra characters
cause logging defects.
Miscellanea:
o Coalesce formats
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test-building this driver on targets without CONFIG_OF revealed a build
failure:
drivers/net/ethernet/ti/davinci_mdio.c: In function 'davinci_mdio_probe':
drivers/net/ethernet/ti/davinci_mdio.c:380:9: error: implicit declaration of function 'davinci_mdio_probe_dt'; did you mean 'davinci_mdio_probe'? [-Werror=implicit-function-declaration]
This adjusts the #ifdef logic in the driver to make it build in
all configurations.
Fixes: 2652113ff0 ("net: ethernet: ti: Allow most drivers with COMPILE_TEST")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While compile-testing on arm64 with gcc-8.1, I ran into a build diagnostic:
drivers/net/ethernet/freescale/fec_main.c: In function 'fec_probe':
drivers/net/ethernet/freescale/fec_main.c:3517:25: error: '%d' directive writing between 1 and 10 bytes into a region of size 5 [-Werror=format-overflow=]
sprintf(irq_name, "int%d", i);
^~
drivers/net/ethernet/freescale/fec_main.c:3517:21: note: directive argument in the range [0, 2147483646]
sprintf(irq_name, "int%d", i);
^~~~~~~
drivers/net/ethernet/freescale/fec_main.c:3517:3: note: 'sprintf' output between 5 and 14 bytes into a destination of size 8
sprintf(irq_name, "int%d", i);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
It appears this has never shown on ppc32 or arm32 for an unknown reason, but
now gcc fails to identify that the 'irq_cnt' loop index has an upper bound
of 3, and instead uses a bogus range.
To work around the warning, this changes the sprintf to snprintf with the
correct buffer length.
Fixes: 78cc6e7ef9 ("net: ethernet: freescale: Allow FEC with COMPILE_TEST")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As we keep the offloaded TC rules for NIC and e-switch in two different
places, make sure to return the number of offloaded flows according
to the use-case and not blindly from the priv.
Fixes: 655dc3d2b9 ('net/mlx5e: Use shared table for offloaded TC eswitch flows')
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reported-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
When mlx5_fpga_conn_unmap_buf is called buf->sg[0].size
should equal the actual buffer size, not the message size.
Otherwise we will trigger the following dma debug warning
"DMA-API: device driver frees DMA memory with different size"
Fixes: 537a505741 ('net/mlx5: FPGA, Add high-speed connection routines')
Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Properly initialize dma direction on fpga conn send.
Do not rely on dma_dir == 0 (DMA_BIDIRECTIONAL).
Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
In the case that the reported max number of QPs capability
equals to zero, abort FPGA init.
Signed-off-by: Yevgeny Kliteynik <kliteyn@mellanox.com>
Signed-off-by: Adi Nissim <adin@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Add print of the following values on init:
1. ieee vendor id
2. sandbox product id
3. sandbox product version
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Adi Nissim <adin@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Add device name for Mellanox FPGA devices.
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Adi Nissim <adin@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
gcc-7.3.0 report following err:
HOSTCC net/bpfilter/main.o
In file included from net/bpfilter/main.c:9:0:
./include/uapi/linux/bpf.h:12:10: fatal error: linux/bpf_common.h: No such file or directory
#include <linux/bpf_common.h>
remove it by adding a include path.
Fixes: d2ba09c17a ("net: add skeleton of bpfilter kernel module")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
skb->len is meaningless to user.
data length could be more helpful, with which we can easily filter out
the packet without payload.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Atul Gupta <atul.gupta@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- unindented continue
- check for null page
- signed return
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Atul Gupta <atul.gupta@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
skb dereferenced before check in sendpage
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Atul Gupta <atul.gupta@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
address suspicious code <gustavo@embeddedor.com>
1210 set_bit(SOCK_NOSPACE, &sk->sk_socket->flags);
1211 }
The issue is that in the code above, set_bit is never reached
due to the 'continue' statement at line 1208.
Also reported by bug report:<dan.carpenter@oracle.com>
1210 set_bit(SOCK_NOSPACE, &sk->sk_socket->flags);
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Not reachable.
Its required to wait for buffer in the send path and takes care of
unaddress and un-handled SOCK_NOSPACE.
v2: use csk_mem_free where appropriate
proper indent of goto do_nonblock
replace out with do_rm_wq
Reported-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Atul Gupta <atul.gupta@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
corrected the key length to copy 128b key. Removed 192b and 256b
key as user input supports key of size 128b in gcm_ctx
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Atul Gupta <atul.gupta@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern says:
====================
net: Add address attribute to control metric of prefix route
For use cases such as VRR (Virtual Router Redundancy) interface managers
want efficient control over the order of prefix routes when multiple
interfaces have addresses with overlapping/duplicate subnets.
Currently, if two interfaces have addresses in the same subnet, the order
of the prefix route entries is determined by the order in which the
addresses are assigned or the links brought up. Any actions like cycling
an interface up and down changes that order. This set adds a new attribute
for addresses to allow a user to specify the metric of the prefix route
associated with an address giving interface managers better and more
efficient control of the order of prefix routes.
Patches 1-3 refactor IPv6 address add functions to pass an ifa6_config
struct. The functions currently have a long list of arguments and adding
the metric just makes it worse. Because of the overall diff size in
moving the arguments to a struct, the change is done in stages to make
it easier to review starting with the bottom function and pushing the
struct up to callers in each successive patch.
Patch 4 introduces the new attribute.
Patches 5 and 6 add support for the new attribute to IPv4 and IPv6
addresses.
Patch 7 adds a set of test cases.
Patch 8 adds support to iproute2
Changes since RFC
- collapsed patches 1 and 3 into patch 2
- simplified stack variables in fib_modify_prefix_metric in patch 5
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Anastasov
Pablo Neira Ayuso
Kees Cook
Jason A. Donenfeld
Phil Sutter
Máté Eckl
kbuild test robot
Wei Yongjun
Andrew Lunn
Arnd Bergmann
David S. Miller
Ilan Tayari
Donald Sharp
Ganesh Goudar
Petr Machata
Sudarsana Reddy Kalluru
Song Liu
Yafang Shao
Yangbo Lu
Joe Perches
Or Gerlitz
Ilya Lesokhin
Yevgeny Kliteynik
YueHaibing
Atul Gupta