Граф коммитов

3425 Коммитов

Автор SHA1 Сообщение Дата
Al Viro 7a163b2195 unify {de,}mangle_poll(), get rid of kernel-side POLL...
except, again, POLLFREE and POLL_BUSY_LOOP.

With this, we finally get to the promised end result:

 - POLL{IN,OUT,...} are plain integers and *not* in __poll_t, so any
   stray instances of ->poll() still using those will be caught by
   sparse.

 - eventpoll.c and select.c warning-free wrt __poll_t

 - no more kernel-side definitions of POLL... - userland ones are
   visible through the entire kernel (and used pretty much only for
   mangle/demangle)

 - same behavior as after the first series (i.e. sparc et.al. epoll(2)
   working correctly).

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-11 14:37:22 -08:00
Linus Torvalds 3ff1b28caa libnvdimm for 4.16
* Require struct page by default for filesystem DAX to remove a number of
   surprising failure cases.  This includes failures with direct I/O, gdb and
   fork(2).
 
 * Add support for the new Platform Capabilities Structure added to the NFIT in
   ACPI 6.2a.  This new table tells us whether the platform supports flushing
   of CPU and memory controller caches on unexpected power loss events.
 
 * Revamp vmem_altmap and dev_pagemap handling to clean up code and better
   support future future PCI P2P uses.
 
 * Deprecate the ND_IOCTL_SMART_THRESHOLD command whose payload has become
   out-of-sync with recent versions of the NVDIMM_FAMILY_INTEL spec, and
   instead rely on the generic ND_CMD_CALL approach used by the two other IOCTL
   families, NVDIMM_FAMILY_{HPE,MSFT}.
 
 * Enhance nfit_test so we can test some of the new things added in version 1.6
   of the DSM specification.  This includes testing firmware download and
   simulating the Last Shutdown State (LSS) status.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJaeOg0AAoJEJ/BjXdf9fLBAFoQAI/IgcgJ2h9lfEpgjBRTC44t
 2p8dxwT1Ofw3Y1aR/tI8nYRXjRtAGuP4UIeRVnb1CL/N7PagJyoMGU+6hmzg+ptY
 c7cEDvw6nZOhrFwXx/xn7R53sYG8zH+UE6+jTR/PP/G4mQJfFCg4iF9R72Y7z0n7
 aurf82Kz137NPUy6dNr4V9bmPMJWAaOci9WOj5SKddR5ZSNbjoxylTwQRvre5y4r
 7HQTScEkirABOdSf1JoXTSUXCH/RC9UFFXR03ScHstGb1HjCj3KdcicVc50Q++Ub
 qsEudhE6i44PEW1Hh4Qkg6hjHMEa8qHP+ShBuRuVaUmlghYTQn66niJAYLZilwdz
 EVjE7vR+toHA5g3YCalEmYVutUEhIDkh/xfpd7vM6ZorUGJy95a2elEJs2fHBffC
 gEhnCip7FROPcK5RDNUM8hBgnG/q5wwWPQMKY+6rKDZQx3mXssCrKp2Vlx7kBwMG
 rpblkEpYjPonbLEHxsSU8yTg9Uq55ciIWgnOToffcjZvjbihi8WUVlHcwHUMPf/o
 DWElg+4qmG0Sdd4S2NeAGwTl1Ewrf2RrtUGMjHtH4OUFs1wo6ZmfrxFzzMfoZ1Od
 ko/s65v4uwtTzECh2o+XQaNsReR5YETXxmA40N/Jpo7/7twABIoZ/ASvj/3ZBYj+
 sie+u2rTod8/gQWSfHpJ
 =MIMX
 -----END PGP SIGNATURE-----

Merge tag 'libnvdimm-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm

Pull libnvdimm updates from Ross Zwisler:

 - Require struct page by default for filesystem DAX to remove a number
   of surprising failure cases. This includes failures with direct I/O,
   gdb and fork(2).

 - Add support for the new Platform Capabilities Structure added to the
   NFIT in ACPI 6.2a. This new table tells us whether the platform
   supports flushing of CPU and memory controller caches on unexpected
   power loss events.

 - Revamp vmem_altmap and dev_pagemap handling to clean up code and
   better support future future PCI P2P uses.

 - Deprecate the ND_IOCTL_SMART_THRESHOLD command whose payload has
   become out-of-sync with recent versions of the NVDIMM_FAMILY_INTEL
   spec, and instead rely on the generic ND_CMD_CALL approach used by
   the two other IOCTL families, NVDIMM_FAMILY_{HPE,MSFT}.

 - Enhance nfit_test so we can test some of the new things added in
   version 1.6 of the DSM specification. This includes testing firmware
   download and simulating the Last Shutdown State (LSS) status.

* tag 'libnvdimm-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (37 commits)
  libnvdimm, namespace: remove redundant initialization of 'nd_mapping'
  acpi, nfit: fix register dimm error handling
  libnvdimm, namespace: make min namespace size 4K
  tools/testing/nvdimm: force nfit_test to depend on instrumented modules
  libnvdimm/nfit_test: adding support for unit testing enable LSS status
  libnvdimm/nfit_test: add firmware download emulation
  nfit-test: Add platform cap support from ACPI 6.2a to test
  libnvdimm: expose platform persistence attribute for nd_region
  acpi: nfit: add persistent memory control flag for nd_region
  acpi: nfit: Add support for detect platform CPU cache flush on power loss
  device-dax: Fix trailing semicolon
  libnvdimm, btt: fix uninitialized err_lock
  dax: require 'struct page' by default for filesystem dax
  ext2: auto disable dax instead of failing mount
  ext4: auto disable dax instead of failing mount
  mm, dax: introduce pfn_t_special()
  mm: Fix devm_memremap_pages() collision handling
  mm: Fix memory size alignment in devm_memremap_pages_release()
  memremap: merge find_dev_pagemap into get_dev_pagemap
  memremap: change devm_memremap_pages interface to use struct dev_pagemap
  ...
2018-02-06 10:41:33 -08:00
Linus Torvalds 3879ae653a The core framework has a handful of patches this time around, mostly due
to the clk rate protection support added by Jerome Brunet. This feature
 will allow consumers to lock in a certain rate on the output of a clk so
 that things like audio playback don't hear pops when the clk frequency
 changes due to shared parent clks changing rates. Currently the clk
 API doesn't guarantee the rate of a clk stays at the rate you request
 after clk_set_rate() is called, so this new API will allow drivers
 to express that requirement. Beyond this, the core got some debugfs
 pretty printing patches and a couple minor non-critical fixes.
 
 Looking outside of the core framework diff we have some new driver
 additions and the removal of a legacy TI clk driver. Both of these hit
 high in the dirstat. Also, the removal of the asm-generic/clkdev.h file
 causes small one-liners in all the architecture Kbuild files. Overall, the
 driver diff seems to be the normal stuff that comes all the time to
 fix little problems here and there and to support new hardware.
 
 Core:
  - Clk rate protection
  - Symbolic clk flags in debugfs output
  - Clk registration enabled clks while doing bookkeeping updates
 
 New Drivers:
  - Spreadtrum SC9860
  - HiSilicon hi3660 stub
  - Qualcomm A53 PLL, SPMI clkdiv, and MSM8916 APCS
  - Amlogic Meson-AXG
  - ASPEED BMC
 
 Removed Drivers:
  - TI OMAP 3xxx legacy clk (non-DT) support
  - asm*/clkdev.h got removed (not really a driver)
 
 Updates:
  - Renesas FDP1-0 module clock on R-Car M3-W
  - Renesas LVDS module clock on R-Car V3M
  - Misc fixes to pr_err() prints
  - Qualcomm MSM8916 audio fixes
  - Qualcomm IPQ8074 rounded out support for more peripherals
  - Qualcomm Alpha PLL variants
  - Divider code was using container_of() on bad pointers
  - Allwinner DE2 clks on H3
  - Amlogic minor data fixes and dropping of CLK_IGNORE_UNUSED
  - Mediatek clk driver compile test support
  - AT91 PMC clk suspend/resume restoration support
  - PLL issues fixed on si5351
  - Broadcom IProc PLL calculation updates
  - DVFS support for Armada mvebu CPU clks
  - Allwinner fixed post-divider support
  - TI clkctrl fixes and support for newer SoCs
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJac5vRAAoJEK0CiJfG5JUlUaIP/Riq0tbApfc4k4GMvSvaieR/
 AwZFIMCxOxO+KGdUsBWj7UUoDfBYmxyknHZkVUA/m+Lm7cRH/YHHMghEceZLaBYW
 zPQmDfkTl/QkwysXZMCw9vg4vO0tt5gWbHljQnvVhxVVTCkIRpaE8Vkktj1RZzpY
 WU/TkvPbVGY3SNm504TRXKWC9KpMTEXVvzqlg6zLDJ/jE7PGzBKtewqMoLDCBH2L
 q6b50BSXDo2Hep0vm6e5xneXKjLNR4kgN4PkbM4Yoi4iWLLbgAu79NfyOvvr/imS
 HxOHRms9tejtyaiR6bQSF0pbLOERZ3QSbMFEbxdxnCTuPEfy3Nw/2W7mNJlhJa8g
 EGLMnLL4WdloL4Z83dAcMrj9OmxYf7Yobf5dMidLrQT5EYuafdj0ParbI8TQpWSB
 eTqaffSUGPE/7xuKouYBcbvocpXXWCcokrP/mEn3OEHXkIeeut1Jd3RmEvsi3gtJ
 pNraJTIpvt4c05rj6yLUOhWfyqlA+fH3p4Fx3rrH1tmKEiG+lrhKoxF26uALZe0V
 OvarhG+LPIE10pCIYlQjZjQVnYLGCxsGAIoK1uz7VYvFPh2T0cxQlzzeqFgrlTyN
 32hMj3LhkQw82FG9xZqjTX1935R35mySRlx63x7HStI1YFief2X9+RHjJR/lofG0
 nC0JWTp5sC/pKf54QBXj
 =bGPp
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "The core framework has a handful of patches this time around, mostly
  due to the clk rate protection support added by Jerome Brunet.

  This feature will allow consumers to lock in a certain rate on the
  output of a clk so that things like audio playback don't hear pops
  when the clk frequency changes due to shared parent clks changing
  rates. Currently the clk API doesn't guarantee the rate of a clk stays
  at the rate you request after clk_set_rate() is called, so this new
  API will allow drivers to express that requirement.

  Beyond this, the core got some debugfs pretty printing patches and a
  couple minor non-critical fixes.

  Looking outside of the core framework diff we have some new driver
  additions and the removal of a legacy TI clk driver. Both of these hit
  high in the dirstat. Also, the removal of the asm-generic/clkdev.h
  file causes small one-liners in all the architecture Kbuild files.

  Overall, the driver diff seems to be the normal stuff that comes all
  the time to fix little problems here and there and to support new
  hardware.

  Summary:

  Core:
   - Clk rate protection
   - Symbolic clk flags in debugfs output
   - Clk registration enabled clks while doing bookkeeping updates

  New Drivers:
   - Spreadtrum SC9860
   - HiSilicon hi3660 stub
   - Qualcomm A53 PLL, SPMI clkdiv, and MSM8916 APCS
   - Amlogic Meson-AXG
   - ASPEED BMC

  Removed Drivers:
   - TI OMAP 3xxx legacy clk (non-DT) support
   - asm*/clkdev.h got removed (not really a driver)

  Updates:
   - Renesas FDP1-0 module clock on R-Car M3-W
   - Renesas LVDS module clock on R-Car V3M
   - Misc fixes to pr_err() prints
   - Qualcomm MSM8916 audio fixes
   - Qualcomm IPQ8074 rounded out support for more peripherals
   - Qualcomm Alpha PLL variants
   - Divider code was using container_of() on bad pointers
   - Allwinner DE2 clks on H3
   - Amlogic minor data fixes and dropping of CLK_IGNORE_UNUSED
   - Mediatek clk driver compile test support
   - AT91 PMC clk suspend/resume restoration support
   - PLL issues fixed on si5351
   - Broadcom IProc PLL calculation updates
   - DVFS support for Armada mvebu CPU clks
   - Allwinner fixed post-divider support
   - TI clkctrl fixes and support for newer SoCs"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (125 commits)
  clk: aspeed: Handle inverse polarity of USB port 1 clock gate
  clk: aspeed: Fix return value check in aspeed_cc_init()
  clk: aspeed: Add reset controller
  clk: aspeed: Register gated clocks
  clk: aspeed: Add platform driver and register PLLs
  clk: aspeed: Register core clocks
  clk: Add clock driver for ASPEED BMC SoCs
  clk: mediatek: adjust dependency of reset.c to avoid unexpectedly being built
  clk: fix reentrancy of clk_enable() on UP systems
  clk: meson-axg: fix potential NULL dereference in axg_clkc_probe()
  clk: Simplify debugfs registration
  clk: Fix debugfs_create_*() usage
  clk: Show symbolic clock flags in debugfs
  clk: renesas: r8a7796: Add FDP clock
  clk: Move __clk_{get,put}() into private clk.h API
  clk: sunxi: Use CLK_IS_CRITICAL flag for critical clks
  clk: Improve flags doc for of_clk_detect_critical()
  arch: Remove clkdev.h asm-generic from Kbuild
  clk: sunxi-ng: a83t: Add M divider to TCON1 clock
  clk: Prepare to remove asm-generic/clkdev.h
  ...
2018-02-01 16:56:07 -08:00
Linus Torvalds ba49097e1d Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next
Pull sparc updates from David Miller:
 "Of note is the addition of a driver for the Data Analytics
  Accelerator, and some small cleanups"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next:
  oradax: Fix return value check in dax_attach()
  sparc: vDSO: remove an extra tab
  sparc64: drop unneeded compat include
  sparc64: Oracle DAX driver
  sparc64: Oracle DAX infrastructure
2018-02-01 09:34:52 -08:00
Linus Torvalds 40b9672a2f Merge branch 'work.whack-a-mole' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull asm/uaccess.h whack-a-mole from Al Viro:
 "It's linux/uaccess.h, damnit... Oh, well - eventually they'll stop
  cropping up..."

* 'work.whack-a-mole' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  asm-prototypes.h: use linux/uaccess.h, not asm/uaccess.h
  riscv: use linux/uaccess.h, not asm/uaccess.h...
  ppc: for put_user() pull linux/uaccess.h, not asm/uaccess.h
2018-01-31 19:18:12 -08:00
Linus Torvalds 73da9e1a9f Merge branch 'akpm' (patches from Andrew)
Merge updates from Andrew Morton:

 - misc fixes

 - ocfs2 updates

 - most of MM

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (118 commits)
  mm: remove PG_highmem description
  tools, vm: new option to specify kpageflags file
  mm/swap.c: make functions and their kernel-doc agree
  mm, memory_hotplug: fix memmap initialization
  mm: correct comments regarding do_fault_around()
  mm: numa: do not trap faults on shared data section pages.
  hugetlb, mbind: fall back to default policy if vma is NULL
  hugetlb, mempolicy: fix the mbind hugetlb migration
  mm, hugetlb: further simplify hugetlb allocation API
  mm, hugetlb: get rid of surplus page accounting tricks
  mm, hugetlb: do not rely on overcommit limit during migration
  mm, hugetlb: integrate giga hugetlb more naturally to the allocation path
  mm, hugetlb: unify core page allocation accounting and initialization
  mm/memcontrol.c: try harder to decrease [memory,memsw].limit_in_bytes
  mm/memcontrol.c: make local symbol static
  mm/hmm: fix uninitialized use of 'entry' in hmm_vma_walk_pmd()
  include/linux/mmzone.h: fix explanation of lower bits in the SPARSEMEM mem_map pointer
  mm/compaction.c: fix comment for try_to_compact_pages()
  mm/page_ext.c: make page_ext_init a noop when CONFIG_PAGE_EXTENSION but nothing uses it
  zsmalloc: use U suffix for negative literals being shifted
  ...
2018-01-31 18:46:22 -08:00
Nitin Gupta a8e654f01c sparc64: update pmdp_invalidate() to return old pmd value
It's required to avoid losing dirty and accessed bits.

[akpm@linux-foundation.org: add a `do' to the do-while loop]
Link: http://lkml.kernel.org/r/20171213105756.69879-9-kirill.shutemov@linux.intel.com
Signed-off-by: Nitin Gupta <nitin.m.gupta@oracle.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: David Miller <davem@davemloft.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-01-31 17:18:38 -08:00
Linus Torvalds b2fe5fa686 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:

 1) Significantly shrink the core networking routing structures. Result
    of http://vger.kernel.org/~davem/seoul2017_netdev_keynote.pdf

 2) Add netdevsim driver for testing various offloads, from Jakub
    Kicinski.

 3) Support cross-chip FDB operations in DSA, from Vivien Didelot.

 4) Add a 2nd listener hash table for TCP, similar to what was done for
    UDP. From Martin KaFai Lau.

 5) Add eBPF based queue selection to tun, from Jason Wang.

 6) Lockless qdisc support, from John Fastabend.

 7) SCTP stream interleave support, from Xin Long.

 8) Smoother TCP receive autotuning, from Eric Dumazet.

 9) Lots of erspan tunneling enhancements, from William Tu.

10) Add true function call support to BPF, from Alexei Starovoitov.

11) Add explicit support for GRO HW offloading, from Michael Chan.

12) Support extack generation in more netlink subsystems. From Alexander
    Aring, Quentin Monnet, and Jakub Kicinski.

13) Add 1000BaseX, flow control, and EEE support to mvneta driver. From
    Russell King.

14) Add flow table abstraction to netfilter, from Pablo Neira Ayuso.

15) Many improvements and simplifications to the NFP driver bpf JIT,
    from Jakub Kicinski.

16) Support for ipv6 non-equal cost multipath routing, from Ido
    Schimmel.

17) Add resource abstration to devlink, from Arkadi Sharshevsky.

18) Packet scheduler classifier shared filter block support, from Jiri
    Pirko.

19) Avoid locking in act_csum, from Davide Caratti.

20) devinet_ioctl() simplifications from Al viro.

21) More TCP bpf improvements from Lawrence Brakmo.

22) Add support for onlink ipv6 route flag, similar to ipv4, from David
    Ahern.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1925 commits)
  tls: Add support for encryption using async offload accelerator
  ip6mr: fix stale iterator
  net/sched: kconfig: Remove blank help texts
  openvswitch: meter: Use 64-bit arithmetic instead of 32-bit
  tcp_nv: fix potential integer overflow in tcpnv_acked
  r8169: fix RTL8168EP take too long to complete driver initialization.
  qmi_wwan: Add support for Quectel EP06
  rtnetlink: enable IFLA_IF_NETNSID for RTM_NEWLINK
  ipmr: Fix ptrdiff_t print formatting
  ibmvnic: Wait for device response when changing MAC
  qlcnic: fix deadlock bug
  tcp: release sk_frag.page in tcp_disconnect
  ipv4: Get the address of interface correctly.
  net_sched: gen_estimator: fix lockdep splat
  net: macb: Handle HRESP error
  net/mlx5e: IPoIB, Fix copy-paste bug in flow steering refactoring
  ipv6: addrconf: break critical section in addrconf_verify_rtnl()
  ipv6: change route cache aging logic
  i40e/i40evf: Update DESC_NEEDED value to reflect larger value
  bnxt_en: cleanup DIM work on device shutdown
  ...
2018-01-31 14:31:10 -08:00
Linus Torvalds a103950e0d Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
 "API:
   - Enforce the setting of keys for keyed aead/hash/skcipher
     algorithms.
   - Add multibuf speed tests in tcrypt.

  Algorithms:
   - Improve performance of sha3-generic.
   - Add native sha512 support on arm64.
   - Add v8.2 Crypto Extentions version of sha3/sm3 on arm64.
   - Avoid hmac nesting by requiring underlying algorithm to be unkeyed.
   - Add cryptd_max_cpu_qlen module parameter to cryptd.

  Drivers:
   - Add support for EIP97 engine in inside-secure.
   - Add inline IPsec support to chelsio.
   - Add RevB core support to crypto4xx.
   - Fix AEAD ICV check in crypto4xx.
   - Add stm32 crypto driver.
   - Add support for BCM63xx platforms in bcm2835 and remove bcm63xx.
   - Add Derived Key Protocol (DKP) support in caam.
   - Add Samsung Exynos True RNG driver.
   - Add support for Exynos5250+ SoCs in exynos PRNG driver"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (166 commits)
  crypto: picoxcell - Fix error handling in spacc_probe()
  crypto: arm64/sha512 - fix/improve new v8.2 Crypto Extensions code
  crypto: arm64/sm3 - new v8.2 Crypto Extensions implementation
  crypto: arm64/sha3 - new v8.2 Crypto Extensions implementation
  crypto: testmgr - add new testcases for sha3
  crypto: sha3-generic - export init/update/final routines
  crypto: sha3-generic - simplify code
  crypto: sha3-generic - rewrite KECCAK transform to help the compiler optimize
  crypto: sha3-generic - fixes for alignment and big endian operation
  crypto: aesni - handle zero length dst buffer
  crypto: artpec6 - remove select on non-existing CRYPTO_SHA384
  hwrng: bcm2835 - Remove redundant dev_err call in bcm2835_rng_probe()
  crypto: stm32 - remove redundant dev_err call in stm32_cryp_probe()
  crypto: axis - remove unnecessary platform_get_resource() error check
  crypto: testmgr - test misuse of result in ahash
  crypto: inside-secure - make function safexcel_try_push_requests static
  crypto: aes-generic - fix aes-generic regression on powerpc
  crypto: chelsio - Fix indentation warning
  crypto: arm64/sha1-ce - get rid of literal pool
  crypto: arm64/sha2-ce - move the round constant table to .rodata section
  ...
2018-01-31 14:22:45 -08:00
Linus Torvalds 168fe32a07 Merge branch 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull poll annotations from Al Viro:
 "This introduces a __bitwise type for POLL### bitmap, and propagates
  the annotations through the tree. Most of that stuff is as simple as
  'make ->poll() instances return __poll_t and do the same to local
  variables used to hold the future return value'.

  Some of the obvious brainos found in process are fixed (e.g. POLLIN
  misspelled as POLL_IN). At that point the amount of sparse warnings is
  low and most of them are for genuine bugs - e.g. ->poll() instance
  deciding to return -EINVAL instead of a bitmap. I hadn't touched those
  in this series - it's large enough as it is.

  Another problem it has caught was eventpoll() ABI mess; select.c and
  eventpoll.c assumed that corresponding POLL### and EPOLL### were
  equal. That's true for some, but not all of them - EPOLL### are
  arch-independent, but POLL### are not.

  The last commit in this series separates userland POLL### values from
  the (now arch-independent) kernel-side ones, converting between them
  in the few places where they are copied to/from userland. AFAICS, this
  is the least disruptive fix preserving poll(2) ABI and making epoll()
  work on all architectures.

  As it is, it's simply broken on sparc - try to give it EPOLLWRNORM and
  it will trigger only on what would've triggered EPOLLWRBAND on other
  architectures. EPOLLWRBAND and EPOLLRDHUP, OTOH, are never triggered
  at all on sparc. With this patch they should work consistently on all
  architectures"

* 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits)
  make kernel-side POLL... arch-independent
  eventpoll: no need to mask the result of epi_item_poll() again
  eventpoll: constify struct epoll_event pointers
  debugging printk in sg_poll() uses %x to print POLL... bitmap
  annotate poll(2) guts
  9p: untangle ->poll() mess
  ->si_band gets POLL... bitmap stored into a user-visible long field
  ring_buffer_poll_wait() return value used as return value of ->poll()
  the rest of drivers/*: annotate ->poll() instances
  media: annotate ->poll() instances
  fs: annotate ->poll() instances
  ipc, kernel, mm: annotate ->poll() instances
  net: annotate ->poll() instances
  apparmor: annotate ->poll() instances
  tomoyo: annotate ->poll() instances
  sound: annotate ->poll() instances
  acpi: annotate ->poll() instances
  crypto: annotate ->poll() instances
  block: annotate ->poll() instances
  x86: annotate ->poll() instances
  ...
2018-01-30 17:58:07 -08:00
Linus Torvalds d4173023e6 Merge branch 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull siginfo cleanups from Eric Biederman:
 "Long ago when 2.4 was just a testing release copy_siginfo_to_user was
  made to copy individual fields to userspace, possibly for efficiency
  and to ensure initialized values were not copied to userspace.

  Unfortunately the design was complex, it's assumptions unstated, and
  humans are fallible and so while it worked much of the time that
  design failed to ensure unitialized memory is not copied to userspace.

  This set of changes is part of a new design to clean up siginfo and
  simplify things, and hopefully make the siginfo handling robust enough
  that a simple inspection of the code can be made to ensure we don't
  copy any unitializied fields to userspace.

  The design is to unify struct siginfo and struct compat_siginfo into a
  single definition that is shared between all architectures so that
  anyone adding to the set of information shared with struct siginfo can
  see the whole picture. Hopefully ensuring all future si_code
  assignments are arch independent.

  The design is to unify copy_siginfo_to_user32 and
  copy_siginfo_from_user32 so that those function are complete and cope
  with all of the different cases documented in signinfo_layout. I don't
  think there was a single implementation of either of those functions
  that was complete and correct before my changes unified them.

  The design is to introduce a series of helpers including
  force_siginfo_fault that take the values that are needed in struct
  siginfo and build the siginfo structure for their callers. Ensuring
  struct siginfo is built correctly.

  The remaining work for 4.17 (unless someone thinks it is post -rc1
  material) is to push usage of those helpers down into the
  architectures so that architecture specific code will not need to deal
  with the fiddly work of intializing struct siginfo, and then when
  struct siginfo is guaranteed to be fully initialized change copy
  siginfo_to_user into a simple wrapper around copy_to_user.

  Further there is work in progress on the issues that have been
  documented requires arch specific knowledge to sort out.

  The changes below fix or at least document all of the issues that have
  been found with siginfo generation. Then proceed to unify struct
  siginfo the 32 bit helpers that copy siginfo to and from userspace,
  and generally clean up anything that is not arch specific with regards
  to siginfo generation.

  It is a lot but with the unification you can of siginfo you can
  already see the code reduction in the kernel"

* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (45 commits)
  signal/memory-failure: Use force_sig_mceerr and send_sig_mceerr
  mm/memory_failure: Remove unused trapno from memory_failure
  signal/ptrace: Add force_sig_ptrace_errno_trap and use it where needed
  signal/powerpc: Remove unnecessary signal_code parameter of do_send_trap
  signal: Helpers for faults with specialized siginfo layouts
  signal: Add send_sig_fault and force_sig_fault
  signal: Replace memset(info,...) with clear_siginfo for clarity
  signal: Don't use structure initializers for struct siginfo
  signal/arm64: Better isolate the COMPAT_TASK portion of ptrace_hbptriggered
  ptrace: Use copy_siginfo in setsiginfo and getsiginfo
  signal: Unify and correct copy_siginfo_to_user32
  signal: Remove the code to clear siginfo before calling copy_siginfo_from_user32
  signal: Unify and correct copy_siginfo_from_user32
  signal/blackfin: Remove pointless UID16_SIGINFO_COMPAT_NEEDED
  signal/blackfin: Move the blackfin specific si_codes to asm-generic/siginfo.h
  signal/tile: Move the tile specific si_codes to asm-generic/siginfo.h
  signal/frv: Move the frv specific si_codes to asm-generic/siginfo.h
  signal/ia64: Move the ia64 specific si_codes to asm-generic/siginfo.h
  signal/powerpc: Remove redefinition of NSIGTRAP on powerpc
  signal: Move addr_lsb into the _sigfault union for clarity
  ...
2018-01-30 14:18:52 -08:00
Linus Torvalds 49f9c3552c init_task out-of-lining
-----BEGIN PGP SIGNATURE-----
 
 iQIVAwUAWl80tvSw1s6N8H32AQJq8A//ViRN5fExrd678Eh2Bz1ytrJYMUfYY3Hv
 QTH5TH9zFyLFyWLB1Iwe13sdLVTTM88O0qcDb54Lx9fWUqeMZyYvBhLtWPc00lTU
 0m3EyYR87MFWaEV+VxaVWgWaWkMDkd39KubDitcS+YIBDszTuMpYodhPUsgLt7lr
 pePX7eurXKdQPTh4NUOjGA2NaZot3tga76J6D8NKruGYUstQCGxpP1ryiFfACnwf
 NLWNO8ZBMtlDwX1mHYOOMFMaBzFzXorPm7jY4HJDf3mUM84xI3ach6CuH9RTSzfq
 A+qB1U3QILPVFo2HtqOHui4bFjRwqOf6uIrI/KcnioJ37w1O+KFcMJeDnX2I211q
 f2lXehJLQA7kPmxQw8T3//HDRaLXc0Qxt7IPZRFinrlkcN4oh3DD5euMfCFBSoZG
 PTbjxlgMfzJPoZtqAcy0rV5L54a/F4h915OQPJCKLwujIsXD2nT993vNmGDyq4zh
 BzNMxSXJC8p+jYvQpNhWyyxwDBBT/YsVQo/ACwg4eJnD3blVTAioRT9ZZcAcsY0F
 0z1eWW5RiknzIaXQWvjfK0gYKpO+aMSu9+gipHfMbU3yXG+sPj/H6zAHYzqX3uQZ
 jb5Iujjnu49W/YD+RiMenuu59lNXUnLSeRnlV7dw0qxGK1FzGo24+ZzKFhJhKvzG
 tdfUsev1Mc8=
 =jhWg
 -----END PGP SIGNATURE-----

Merge tag 'init_task-20180117' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs

Pull init_task initializer cleanups from David Howells:
 "It doesn't seem useful to have the init_task in a header file rather
  than in a normal source file. We could consolidate init_task handling
  instead and expand out various macros.

  Here's a series of patches that consolidate init_task handling:

   (1) Make THREAD_SIZE available to vmlinux.lds for cris, hexagon and
       openrisc.

   (2) Alter the INIT_TASK_DATA linker script macro to set
       init_thread_union and init_stack rather than defining these in C.

       Insert init_task and init_thread_into into the init_stack area in
       the linker script as appropriate to the configuration, with
       different section markers so that they end up correctly ordered.

       We can then get merge ia64's init_task.c into the main one.

       We then have a bunch of single-use INIT_*() macros that seem only
       to be macros because they used to be used per-arch. We can then
       expand these in place of the user and get rid of a few lines and
       a lot of backslashes.

   (3) Expand INIT_TASK() in place.

   (4) Expand in place various small INIT_*() macros that are defined
       conditionally. Expand them and surround them by #if[n]def/#endif
       in the .c file as it takes fewer lines.

   (5) Expand INIT_SIGNALS() and INIT_SIGHAND() in place.

   (6) Expand INIT_STRUCT_PID in place.

  These macros can then be discarded"

* tag 'init_task-20180117' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  Expand INIT_STRUCT_PID and remove
  Expand the INIT_SIGNALS and INIT_SIGHAND macros and remove
  Expand various INIT_* macros and remove
  Expand INIT_TASK() in init/init_task.c and remove
  Construct init thread stack in the linker script rather than by union
  openrisc: Make THREAD_SIZE available to vmlinux.lds
  hexagon: Make THREAD_SIZE available to vmlinux.lds
  cris: Make THREAD_SIZE available to vmlinux.lds
2018-01-29 09:08:34 -08:00
David S. Miller 457740a903 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says:

====================
pull-request: bpf-next 2018-01-26

The following pull-request contains BPF updates for your *net-next* tree.

The main changes are:

1) A number of extensions to tcp-bpf, from Lawrence.
    - direct R or R/W access to many tcp_sock fields via bpf_sock_ops
    - passing up to 3 arguments to bpf_sock_ops functions
    - tcp_sock field bpf_sock_ops_cb_flags for controlling callbacks
    - optionally calling bpf_sock_ops program when RTO fires
    - optionally calling bpf_sock_ops program when packet is retransmitted
    - optionally calling bpf_sock_ops program when TCP state changes
    - access to tclass and sk_txhash
    - new selftest

2) div/mod exception handling, from Daniel.
    One of the ugly leftovers from the early eBPF days is that div/mod
    operations based on registers have a hard-coded src_reg == 0 test
    in the interpreter as well as in JIT code generators that would
    return from the BPF program with exit code 0. This was basically
    adopted from cBPF interpreter for historical reasons.
    There are multiple reasons why this is very suboptimal and prone
    to bugs. To name one: the return code mapping for such abnormal
    program exit of 0 does not always match with a suitable program
    type's exit code mapping. For example, '0' in tc means action 'ok'
    where the packet gets passed further up the stack, which is just
    undesirable for such cases (e.g. when implementing policy) and
    also does not match with other program types.
    After considering _four_ different ways to address the problem,
    we adapt the same behavior as on some major archs like ARMv8:
    X div 0 results in 0, and X mod 0 results in X. aarch64 and
    aarch32 ISA do not generate any traps or otherwise aborts
    of program execution for unsigned divides.
    Given the options, it seems the most suitable from
    all of them, also since major archs have similar schemes in
    place. Given this is all in the realm of undefined behavior,
    we still have the option to adapt if deemed necessary.

3) sockmap sample refactoring, from John.

4) lpm map get_next_key fixes, from Yonghong.

5) test cleanups, from Alexei and Prashant.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-28 21:22:46 -05:00
Daniel Borkmann 740d52c646 bpf, sparc64: remove obsolete exception handling from div/mod
Since we've changed div/mod exception handling for src_reg in
eBPF verifier itself, remove the leftovers from sparc64 JIT.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-01-26 16:42:06 -08:00
David S. Miller 955bd1d216 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24 23:44:15 -05:00
Corentin Labbe aebb48f5e4 sparc64: fix typo in CONFIG_CRYPTO_DES_SPARC64 => CONFIG_CRYPTO_CAMELLIA_SPARC64
This patch fixes the typo CONFIG_CRYPTO_DES_SPARC64 => CONFIG_CRYPTO_CAMELLIA_SPARC64

Fixes: 81658ad0d9 ("sparc64: Add CAMELLIA driver making use of the new camellia opcodes.")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24 16:47:55 -05:00
Dan Carpenter b3ca676f68 sparc: vDSO: remove an extra tab
This statement is indented one tab too far which is confusing and
leads to a Smatch warning:

    arch/sparc/vdso/vma.c:254 arch_setup_additional_pages()
    warn: curly braces intended?

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Nagarathnam Muthusamy <nagarathnam.muthusamy@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-22 12:01:11 -08:00
Rolf Eike Beer 1d9facdc31 sparc64: drop unneeded compat include
The last user of compat_old_sigset_t was removed in commit
2d7d5f0511.

Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-22 08:37:00 -08:00
Rob Gardner dd0273284c sparc64: Oracle DAX driver
DAX is a coprocessor which resides on the SPARC M7 (DAX1) and M8
(DAX2) processor chips, and has direct access to the CPU's L3 caches
as well as physical memory. It can perform several operations on data
streams with various input and output formats.  This driver provides a
transport mechanism and has limited knowledge of the various opcodes
and data formats. A user space library provides high level services
and translates these into low level commands which are then passed
into the driver and subsequently the hypervisor and the coprocessor.
The library is the recommended way for applications to use the
coprocessor, and the driver interface is not intended for general use.

Signed-off-by: Rob Gardner <rob.gardner@oracle.com>
Signed-off-by: Jonathan Helman <jonathan.helman@oracle.com>
Signed-off-by: Sanath Kumar <sanath099@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-22 08:17:16 -08:00
Rob Gardner c2b5934ff5 sparc64: Oracle DAX infrastructure
This patch adds hypercall function stubs and C templates for
ccb_submit/info/kill which provide coprocessor services for the Oracle
Data Analytics Accelerator, registration for the DAX api group, and
all the various associated constants.

Signed-off-by: Rob Gardner <rob.gardner@oracle.com>
Signed-off-by: Jonathan Helman <jonathan.helman@oracle.com>
Signed-off-by: Sanath Kumar <sanath099@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-22 08:17:15 -08:00
Daniel Borkmann fa9dd599b4 bpf: get rid of pure_initcall dependency to enable jits
Having a pure_initcall() callback just to permanently enable BPF
JITs under CONFIG_BPF_JIT_ALWAYS_ON is unnecessary and could leave
a small race window in future where JIT is still disabled on boot.
Since we know about the setting at compilation time anyway, just
initialize it properly there. Also consolidate all the individual
bpf_jit_enable variables into a single one and move them under one
location. Moreover, don't allow for setting unspecified garbage
values on them.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-01-19 18:37:00 -08:00
Eric W. Biederman ea64d5acc8 signal: Unify and correct copy_siginfo_to_user32
Among the existing architecture specific versions of
copy_siginfo_to_user32 there are several different implementation
problems.  Some architectures fail to handle all of the cases in in
the siginfo union.  Some architectures perform a blind copy of the
siginfo union when the si_code is negative.  A blind copy suggests the
data is expected to be in 32bit siginfo format, which means that
receiving such a signal via signalfd won't work, or that the data is
in 64bit siginfo and the code is copying nonsense to userspace.

Create a single instance of copy_siginfo_to_user32 that all of the
architectures can share, and teach it to handle all of the cases in
the siginfo union correctly, with the assumption that siginfo is
stored internally to the kernel is 64bit siginfo format.

A special case is made for x86 x32 format.  This is needed as presence
of both x32 and ia32 on x86_64 results in two different 32bit signal
formats.  By allowing this small special case there winds up being
exactly one code base that needs to be maintained between all of the
architectures.  Vastly increasing the testing base and the chances of
finding bugs.

As the x86 copy of copy_siginfo_to_user32 the call of the x86
signal_compat_build_tests were moved into sigaction_compat_abi, so
that they will keep running.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-01-15 19:56:20 -06:00
Eric W. Biederman 212a36a17e signal: Unify and correct copy_siginfo_from_user32
The function copy_siginfo_from_user32 is used for two things, in ptrace
since the dawn of siginfo for arbirarily modifying a signal that
user space sees, and in sigqueueinfo to send a signal with arbirary
siginfo data.

Create a single copy of copy_siginfo_from_user32 that all architectures
share, and teach it to handle all of the cases in the siginfo union.

In the generic version of copy_siginfo_from_user32 ensure that all
of the fields in siginfo are initialized so that the siginfo structure
can be safely copied to userspace if necessary.

When copying the embedded sigval union copy the si_int member.  That
ensures the 32bit values passes through the kernel unchanged.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-01-15 17:55:59 -06:00
Al Viro b713da69e4 signal: unify compat_siginfo_t
--EWB Added #ifdef CONFIG_X86_X32_ABI to arch/x86/kernel/signal_compat.c
      Changed #ifdef CONFIG_X86_X32 to #ifdef CONFIG_X86_X32_ABI in
      linux/compat.h

      CONFIG_X86_X32 is set when the user requests X32 support.

      CONFIG_X86_X32_ABI is set when the user requests X32 support
      and the tool-chain has X32 allowing X32 support to be built.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2018-01-15 17:40:31 -06:00
Eric W. Biederman 2f82a46f66 signal: Remove _sys_private and _overrun_incr from struct compat_siginfo
We have never passed either field to or from userspace so just remove them.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-01-12 14:34:46 -06:00
Eric Biggers a208fa8f33 crypto: hash - annotate algorithms taking optional key
We need to consistently enforce that keyed hashes cannot be used without
setting the key.  To do this we need a reliable way to determine whether
a given hash algorithm is keyed or not.  AF_ALG currently does this by
checking for the presence of a ->setkey() method.  However, this is
actually slightly broken because the CRC-32 algorithms implement
->setkey() but can also be used without a key.  (The CRC-32 "key" is not
actually a cryptographic key but rather represents the initial state.
If not overridden, then a default initial state is used.)

Prepare to fix this by introducing a flag CRYPTO_ALG_OPTIONAL_KEY which
indicates that the algorithm has a ->setkey() method, but it is not
required to be called.  Then set it on all the CRC-32 algorithms.

The same also applies to the Adler-32 implementation in Lustre.

Also, the cryptd and mcryptd templates have to pass through the flag
from their underlying algorithm.

Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-01-12 23:03:35 +11:00
David Howells 0500871f21 Construct init thread stack in the linker script rather than by union
Construct the init thread stack in the linker script rather than doing it
by means of a union so that ia64's init_task.c can be got rid of.

The following symbols are then made available from INIT_TASK_DATA() linker
script macro:

	init_thread_union
	init_stack

INIT_TASK_DATA() also expands the region to THREAD_SIZE to accommodate the
size of the init stack.  init_thread_union is given its own section so that
it can be placed into the stack space in the right order.  I'm assuming
that the ia64 ordering is correct and that the task_struct is first and the
thread_info second.

Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Tested-by: Will Deacon <will.deacon@arm.com> (arm64)
Tested-by: Palmer Dabbelt <palmer@sifive.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
2018-01-09 23:21:02 +00:00
David S. Miller a0ce093180 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2018-01-09 10:37:00 -05:00
Christoph Hellwig 24b6d41643 mm: pass the vmem_altmap to vmemmap_free
We can just pass this on instead of having to do a radix tree lookup
without proper locking a few levels into the callchain.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-01-08 11:46:23 -08:00
Christoph Hellwig 7b73d978a5 mm: pass the vmem_altmap to vmemmap_populate
We can just pass this on instead of having to do a radix tree lookup
without proper locking a few levels into the callchain.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-01-08 11:46:23 -08:00
Stephen Boyd e0af0c1610 arch: Remove clkdev.h asm-generic from Kbuild
Now that every architecture is using the generic clkdev.h file
and we no longer include asm/clkdev.h anywhere in the tree, we
can remove it.

Cc: Russell King <linux@armlinux.org.uk>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: <linux-arch@vger.kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2018-01-03 09:02:11 -08:00
David S. Miller fcffe2edbd Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:

====================
pull-request: bpf-next 2017-12-28

The following pull-request contains BPF updates for your *net-next* tree.

The main changes are:

1) Fix incorrect state pruning related to recognition of zero initialized
   stack slots, where stacksafe exploration would mistakenly return a
   positive pruning verdict too early ignoring other slots, from Gianluca.

2) Various BPF to BPF calls related follow-up fixes. Fix an off-by-one
   in maximum call depth check, and rework maximum stack depth tracking
   logic to fix a bypass of the total stack size check reported by Jann.
   Also fix a bug in arm64 JIT where prog->jited_len was uninitialized.
   Addition of various test cases to BPF selftests, from Alexei.

3) Addition of a BPF selftest to test_verifier that is related to BPF to
   BPF calls which demonstrates a late caller stack size increase and
   thus out of bounds access. Fixed above in 2). Test case from Jann.

4) Addition of correlating BPF helper calls, BPF to BPF calls as well
   as BPF maps to bpftool xlated dump in order to allow for better
   BPF program introspection and debugging, from Daniel.

5) Fixing several bugs in BPF to BPF calls kallsyms handling in order
   to get it actually to work for subprogs, from Daniel.

6) Extending sparc64 JIT support for BPF to BPF calls and fix a couple
   of build errors for libbpf on sparc64, from David.

7) Allow narrower context access for BPF dev cgroup typed programs in
   order to adapt to LLVM code generation. Also adjust memlock rlimit
   in the test_dev_cgroup BPF selftest, from Yonghong.

8) Add netdevsim Kconfig entry to BPF selftests since test_offload.py
   relies on netdevsim device being available, from Jakub.

9) Reduce scope of xdp_do_generic_redirect_map() to being static,
   from Xiongwei.

10) Minor cleanups and spelling fixes in BPF verifier, from Colin.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-27 20:40:32 -05:00
Jan Engelhardt 59585b4be9 sparc64: repair calling incorrect hweight function from stubs
Commit v4.12-rc4-1-g9289ea7f952b introduced a mistake that made the
64-bit hweight stub call the 16-bit hweight function.

Fixes: 9289ea7f95 ("sparc64: Use indirect calls in hamming weight stubs")
Signed-off-by: Jan Engelhardt <jengelh@inai.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-27 20:29:48 -05:00
David Miller 5f5a641116 bpf: sparc64: Add JIT support for multi-function programs.
Modelled strongly upon the arm64 implementation.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-23 01:00:52 +01:00
David S. Miller fba961ab29 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Lots of overlapping changes.  Also on the net-next side
the XDP state management is handled more in the generic
layers so undo the 'net' nfp fix which isn't applicable
in net-next.

Include a necessary change by Jakub Kicinski, with log message:

====================
cls_bpf no longer takes care of offload tracking.  Make sure
netdevsim performs necessary checks.  This fixes a warning
caused by TC trying to remove a filter it has not added.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-22 11:16:31 -05:00
Linus Torvalds ead68f2161 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller"
 "What's a holiday weekend without some networking bug fixes? [1]

   1) Fix some eBPF JIT bugs wrt. SKB pointers across helper function
      calls, from Daniel Borkmann.

   2) Fix regression from errata limiting change to marvell PHY driver,
      from Zhao Qiang.

   3) Fix u16 overflow in SCTP, from Xin Long.

   4) Fix potential memory leak during bridge newlink, from Nikolay
      Aleksandrov.

   5) Fix BPF selftest build on s390, from Hendrik Brueckner.

   6) Don't append to cfg80211 automatically generated certs file,
      always write new ones from scratch. From Thierry Reding.

   7) Fix sleep in atomic in mac80211 hwsim, from Jia-Ju Bai.

   8) Fix hang on tg3 MTU change with certain chips, from Brian King.

   9) Add stall detection to arc emac driver and reset chip when this
      happens, from Alexander Kochetkov.

  10) Fix MTU limitng in GRE tunnel drivers, from Xin Long.

  11) Fix stmmac timestamping bug due to mis-shifting of field. From
      Fredrik Hallenberg.

  12) Fix metrics match when deleting an ipv4 route. The kernel sets
      some internal metrics bits which the user isn't going to set when
      it makes the delete request. From Phil Sutter.

  13) mvneta driver loop over RX queues limits on "txq_number" :-) Fix
      from Yelena Krivosheev.

  14) Fix double free and memory corruption in get_net_ns_by_id, from
      Eric W. Biederman.

  15) Flush ipv4 FIB tables in the reverse order. Some tables can share
      their actual backing data, in particular this happens for the MAIN
      and LOCAL tables. We have to kill the LOCAL table first, because
      it uses MAIN's backing memory. Fix from Ido Schimmel.

  16) Several eBPF verifier value tracking fixes, from Edward Cree, Jann
      Horn, and Alexei Starovoitov.

  17) Make changes to ipv6 autoflowlabel sysctl really propagate to
      sockets, unless the socket has set the per-socket value
      explicitly. From Shaohua Li.

  18) Fix leaks and double callback invocations of zerocopy SKBs, from
      Willem de Bruijn"

[1] Is this a trick question? "Relaxing"? "Quiet"? "Fine"? - Linus.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (77 commits)
  skbuff: skb_copy_ubufs must release uarg even without user frags
  skbuff: orphan frags before zerocopy clone
  net: reevalulate autoflowlabel setting after sysctl setting
  openvswitch: Fix pop_vlan action for double tagged frames
  ipv6: Honor specified parameters in fibmatch lookup
  bpf: do not allow root to mangle valid pointers
  selftests/bpf: add tests for recent bugfixes
  bpf: fix integer overflows
  bpf: don't prune branches when a scalar is replaced with a pointer
  bpf: force strict alignment checks for stack pointers
  bpf: fix missing error return in check_stack_boundary()
  bpf: fix 32-bit ALU op verification
  bpf: fix incorrect tracking of register size truncation
  bpf: fix incorrect sign extension in check_alu_op()
  bpf/verifier: fix bounds calculation on BPF_RSH
  ipv4: Fix use-after-free when flushing FIB tables
  s390/qeth: fix error handling in checksum cmd callback
  tipc: remove joining group member from congested list
  selftests: net: Adding config fragment CONFIG_NUMA=y
  nfp: bpf: keep track of the offloaded program
  ...
2017-12-21 15:57:30 -08:00
Kees Cook 10a7e9d849 Do not hash userspace addresses in fault handlers
The hashing of %p was designed to restrict kernel addresses. There is
no reason to hash the userspace values seen during a segfault report,
so switch these to %px. (Some architectures already use %lx.)

Fixes: ad67b74d24 ("printk: hash addresses printed with %p")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-12-19 17:04:43 -08:00
David S. Miller 59436c9ee1 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:

====================
pull-request: bpf-next 2017-12-18

The following pull-request contains BPF updates for your *net-next* tree.

The main changes are:

1) Allow arbitrary function calls from one BPF function to another BPF function.
   As of today when writing BPF programs, __always_inline had to be used in
   the BPF C programs for all functions, unnecessarily causing LLVM to inflate
   code size. Handle this more naturally with support for BPF to BPF calls
   such that this __always_inline restriction can be overcome. As a result,
   it allows for better optimized code and finally enables to introduce core
   BPF libraries in the future that can be reused out of different projects.
   x86 and arm64 JIT support was added as well, from Alexei.

2) Add infrastructure for tagging functions as error injectable and allow for
   BPF to return arbitrary error values when BPF is attached via kprobes on
   those. This way of injecting errors generically eases testing and debugging
   without having to recompile or restart the kernel. Tags for opting-in for
   this facility are added with BPF_ALLOW_ERROR_INJECTION(), from Josef.

3) For BPF offload via nfp JIT, add support for bpf_xdp_adjust_head() helper
   call for XDP programs. First part of this work adds handling of BPF
   capabilities included in the firmware, and the later patches add support
   to the nfp verifier part and JIT as well as some small optimizations,
   from Jakub.

4) The bpftool now also gets support for basic cgroup BPF operations such
   as attaching, detaching and listing current BPF programs. As a requirement
   for the attach part, bpftool can now also load object files through
   'bpftool prog load'. This reuses libbpf which we have in the kernel tree
   as well. bpftool-cgroup man page is added along with it, from Roman.

5) Back then commit e87c6bc385 ("bpf: permit multiple bpf attachments for
   a single perf event") added support for attaching multiple BPF programs
   to a single perf event. Given they are configured through perf's ioctl()
   interface, the interface has been extended with a PERF_EVENT_IOC_QUERY_BPF
   command in this work in order to return an array of one or multiple BPF
   prog ids that are currently attached, from Yonghong.

6) Various minor fixes and cleanups to the bpftool's Makefile as well
   as a new 'uninstall' and 'doc-uninstall' target for removing bpftool
   itself or prior installed documentation related to it, from Quentin.

7) Add CONFIG_CGROUP_BPF=y to the BPF kernel selftest config file which is
   required for the test_dev_cgroup test case to run, from Naresh.

8) Fix reporting of XDP prog_flags for nfp driver, from Jakub.

9) Fix libbpf's exit code from the Makefile when libelf was not found in
   the system, also from Jakub.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18 10:51:06 -05:00
David S. Miller b36025b19a Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:

====================
pull-request: bpf 2017-12-17

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Fix a corner case in generic XDP where we have non-linear skbs
   but enough tailroom in the skb to not miss to linearizing there,
   from Song.

2) Fix BPF JIT bugs in s390x and ppc64 to not recache skb data when
   BPF context is not skb, from Daniel.

3) Fix a BPF JIT bug in sparc64 where recaching skb data after helper
   call would use the wrong register for the skb, from Daniel.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18 10:49:22 -05:00
Alexei Starovoitov 60b58afc96 bpf: fix net.core.bpf_jit_enable race
global bpf_jit_enable variable is tested multiple times in JITs,
blinding and verifier core. The malicious root can try to toggle
it while loading the programs. This race condition was accounted
for and there should be no issues, but it's safer to avoid
this race condition.

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-17 20:34:36 +01:00
Linus Torvalds f6f3732162 Revert "mm: replace p??_write with pte_access_permitted in fault + gup paths"
This reverts commits 5c9d2d5c26, c7da82b894, and e7fe7b5cae.

We'll probably need to revisit this, but basically we should not
complicate the get_user_pages_fast() case, and checking the actual page
table protection key bits will require more care anyway, since the
protection keys depend on the exact state of the VM in question.

Particularly when doing a "remote" page lookup (ie in somebody elses VM,
not your own), you need to be much more careful than this was.  Dave
Hansen says:

 "So, the underlying bug here is that we now a get_user_pages_remote()
  and then go ahead and do the p*_access_permitted() checks against the
  current PKRU. This was introduced recently with the addition of the
  new p??_access_permitted() calls.

  We have checks in the VMA path for the "remote" gups and we avoid
  consulting PKRU for them. This got missed in the pkeys selftests
  because I did a ptrace read, but not a *write*. I also didn't
  explicitly test it against something where a COW needed to be done"

It's also not entirely clear that it makes sense to check the protection
key bits at this level at all.  But one possible eventual solution is to
make the get_user_pages_fast() case just abort if it sees protection key
bits set, which makes us fall back to the regular get_user_pages() case,
which then has a vma and can do the check there if we want to.

We'll see.

Somewhat related to this all: what we _do_ want to do some day is to
check the PAGE_USER bit - it should obviously always be set for user
pages, but it would be a good check to have back.  Because we have no
generic way to test for it, we lost it as part of moving over from the
architecture-specific x86 GUP implementation to the generic one in
commit e585513b76 ("x86/mm/gup: Switch GUP to the generic
get_user_page_fast() implementation").

Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-12-15 18:53:22 -08:00
Daniel Borkmann 07aee94394 bpf, sparc: fix usage of wrong reg for load_skb_regs after call
When LD_ABS/IND is used in the program, and we have a BPF helper
call that changes packet data (bpf_helper_changes_pkt_data() returns
true), then in case of sparc JIT, we try to reload cached skb data
from bpf2sparc[BPF_REG_6]. However, there is no such guarantee or
assumption that skb sits in R6 at this point, all helpers changing
skb data only have a guarantee that skb sits in R1. Therefore,
store BPF R1 in L7 temporarily and after procedure call use L7 to
reload cached skb data. skb sitting in R6 is only true at the time
when LD_ABS/IND is executed.

Fixes: 7a12b5031c ("sparc64: Add eBPF JIT.")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2017-12-15 09:19:35 -08:00
Hendrik Brueckner c895f6f703 bpf: correct broken uapi for BPF_PROG_TYPE_PERF_EVENT program type
Commit 0515e5999a ("bpf: introduce BPF_PROG_TYPE_PERF_EVENT
program type") introduced the bpf_perf_event_data structure which
exports the pt_regs structure.  This is OK for multiple architectures
but fail for s390 and arm64 which do not export pt_regs.  Programs
using them, for example, the bpf selftest fail to compile on these
architectures.

For s390, exporting the pt_regs is not an option because s390 wants
to allow changes to it.  For arm64, there is a user_pt_regs structure
that covers parts of the pt_regs structure for use by user space.

To solve the broken uapi for s390 and arm64, introduce an abstract
type for pt_regs and add an asm/bpf_perf_event.h file that concretes
the type.  An asm-generic header file covers the architectures that
export pt_regs today.

The arch-specific enablement for s390 and arm64 follows in separate
commits.

Reported-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Fixes: 0515e5999a ("bpf: introduce BPF_PROG_TYPE_PERF_EVENT program type")
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Reviewed-and-tested-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-05 15:02:40 +01:00
Al Viro c68070d040 asm-prototypes.h: use linux/uaccess.h, not asm/uaccess.h
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-12-04 18:03:39 -05:00
Linus Torvalds a0908a1b7d Merge branch 'akpm' (patches from Andrew)
Mergr misc fixes from Andrew Morton:
 "28 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (28 commits)
  fs/hugetlbfs/inode.c: change put_page/unlock_page order in hugetlbfs_fallocate()
  mm/hugetlb: fix NULL-pointer dereference on 5-level paging machine
  autofs: revert "autofs: fix AT_NO_AUTOMOUNT not being honored"
  autofs: revert "autofs: take more care to not update last_used on path walk"
  fs/fat/inode.c: fix sb_rdonly() change
  mm, memcg: fix mem_cgroup_swapout() for THPs
  mm: migrate: fix an incorrect call of prep_transhuge_page()
  kmemleak: add scheduling point to kmemleak_scan()
  scripts/bloat-o-meter: don't fail with division by 0
  fs/mbcache.c: make count_objects() more robust
  Revert "mm/page-writeback.c: print a warning if the vm dirtiness settings are illogical"
  mm/madvise.c: fix madvise() infinite loop under special circumstances
  exec: avoid RLIMIT_STACK races with prlimit()
  IB/core: disable memory registration of filesystem-dax vmas
  v4l2: disable filesystem-dax mapping support
  mm: fail get_vaddr_frames() for filesystem-dax mappings
  mm: introduce get_user_pages_longterm
  device-dax: implement ->split() to catch invalid munmap attempts
  mm, hugetlbfs: introduce ->split() to vm_operations_struct
  scripts/faddr2line: extend usage on generic arch
  ...
2017-11-29 19:12:44 -08:00
Dan Williams c7da82b894 mm: replace pmd_write with pmd_access_permitted in fault + gup paths
The 'access_permitted' helper is used in the gup-fast path and goes
beyond the simple _PAGE_RW check to also:

 - validate that the mapping is writable from a protection keys
   standpoint

 - validate that the pte has _PAGE_USER set since all fault paths where
   pmd_write is must be referencing user-memory.

Link: http://lkml.kernel.org/r/151043111049.2842.15241454964150083466.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-29 18:40:42 -08:00
Dan Williams e7fe7b5cae mm: replace pud_write with pud_access_permitted in fault + gup paths
The 'access_permitted' helper is used in the gup-fast path and goes
beyond the simple _PAGE_RW check to also:

 - validate that the mapping is writable from a protection keys
   standpoint

 - validate that the pte has _PAGE_USER set since all fault paths where
   pud_write is must be referencing user-memory.

[dan.j.williams@intel.com: fix powerpc compile error]
  Link: http://lkml.kernel.org/r/151129127237.37405.16073414520854722485.stgit@dwillia2-desk3.amr.corp.intel.com
Link: http://lkml.kernel.org/r/151043110453.2842.2166049702068628177.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-29 18:40:42 -08:00
Dan Williams e4e40e0263 mm: switch to 'define pmd_write' instead of __HAVE_ARCH_PMD_WRITE
In response to compile breakage introduced by a series that added the
pud_write helper to x86, Stephen notes:

    did you consider using the other paradigm:

    In arch include files:
    #define pud_write       pud_write
    static inline int pud_write(pud_t pud)
     .....

    Then in include/asm-generic/pgtable.h:

    #ifndef pud_write
    tatic inline int pud_write(pud_t pud)
    {
            ....
    }
    #endif

    If you had, then the powerpc code would have worked ... ;-) and many
    of the other interfaces in include/asm-generic/pgtable.h are
    protected that way ...

Given that some architecture already define pmd_write() as a macro, it's
a net reduction to drop the definition of __HAVE_ARCH_PMD_WRITE.

Link: http://lkml.kernel.org/r/151129126721.37405.13339850900081557813.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Suggested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Oliver OHalloran <oliveroh@au1.ibm.com>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-29 18:40:42 -08:00
Al Viro c71d227fc4 make kernel-side POLL... arch-independent
mangle/demangle on the way to/from userland

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-29 19:00:41 -05:00
David S. Miller e5372cd5ef sparc64: Fix boot on T4 and later.
If we don't put the NG4fls.o object into the same part of
the link as the generic sparc64 objects for fls() and __fls()
then the relocation in the branch we use for patching will
not fit.

Move NG4fls.o into lib-y to fix this problem.

Fixes: 46ad8d2d22 ("sparc64: Use sparc optimized fls and __fls for T4 and above")
Signed-off-by: David S. Miller <davem@davemloft.net>
Reported-by: Anatoly Pugachev <matorola@gmail.com>
Tested-by: Anatoly Pugachev <matorola@gmail.com>
2017-11-29 15:09:29 -05:00