The authorize reply can be empty, for example when the ticket used to
build the authorizer is too old and TAG_BADAUTHORIZER is returned from
the service. Calling ->verify_authorizer_reply() results in an attempt
to decrypt and validate (somewhat) random data in au->buf (most likely
the signature block from calc_signature()), which fails and ends up in
con_fault_finish() with !con->auth_retry. The ticket isn't invalidated
and the connection is retried again and again until a new ticket is
obtained from the monitor:
libceph: osd2 192.168.122.1:6809 bad authorize reply
libceph: osd2 192.168.122.1:6809 bad authorize reply
libceph: osd2 192.168.122.1:6809 bad authorize reply
libceph: osd2 192.168.122.1:6809 bad authorize reply
Let TAG_BADAUTHORIZER handler kick in and increment con->auth_retry.
Cc: stable@vger.kernel.org
Fixes: 5c056fdc5b ("libceph: verify authorize reply on connect")
Link: https://tracker.ceph.com/issues/20164
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
con_fault() can transition the connection into STANDBY right after
ceph_con_keepalive() clears STANDBY in clear_standby():
libceph user thread ceph-msgr worker
ceph_con_keepalive()
mutex_lock(&con->mutex)
clear_standby(con)
mutex_unlock(&con->mutex)
mutex_lock(&con->mutex)
con_fault()
...
if KEEPALIVE_PENDING isn't set
set state to STANDBY
...
mutex_unlock(&con->mutex)
set KEEPALIVE_PENDING
set WRITE_PENDING
This triggers warnings in clear_standby() when either ceph_con_send()
or ceph_con_keepalive() get to clearing STANDBY next time.
I don't see a reason to condition queue_con() call on the previous
value of KEEPALIVE_PENDING, so move the setting of KEEPALIVE_PENDING
into the critical section -- unlike WRITE_PENDING, KEEPALIVE_PENDING
could have been a non-atomic flag.
Reported-by: syzbot+acdeb633f6211ccdf886@syzkaller.appspotmail.com
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Tested-by: Myungho Jung <mhjungk@gmail.com>
Introduce a new option abort_on_full, default to false. Then
we can get -ENOSPC when the pool is full, or reaches quota.
[ Don't show abort_on_full in /proc/mounts. ]
Signed-off-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Prevent do_tcp_sendpages() from calling tcp_push() (at least) once per
page. Instead, arrange for tcp_push() to be called (at least) once per
data payload. This results in more MSS-sized packets and fewer packets
overall (5-10% reduction in my tests with typical OSD request sizes).
See commits 2f53384424 ("tcp: allow splice() to build full TSO
packets"), 35f9c09fe9 ("tcp: tcp_sendpages() should call tcp_push()
once") and ae62ca7b03 ("tcp: fix MSG_SENDPAGE_NOTLAST logic") for
details.
Here is an example of a packet size histogram for 128K OSD requests
(MSS = 1448, top 5):
Before:
SIZE COUNT
1448 777700
952 127915
1200 39238
1219 9806
21 5675
After:
SIZE COUNT
1448 897280
21 6201
1019 2797
643 2739
376 2479
We could do slightly better by explicitly corking the socket but it's
not clear it's worth it.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
sock_no_sendpage() makes the code cleaner.
Also, don't set MSG_EOR. sendpage doesn't act on MSG_EOR on its own,
it just honors the setting from the preceding sendmsg call by looking
at ->eor in tcp_skb_can_collapse_to().
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
last_piece is for the last piece in the current data item, not in the
entire data payload of the message. This is harmful for messages with
multiple data items. On top of that, we don't need to signal the end
of a data payload either because it is always followed by a footer.
We used to signal "more" unconditionally, until commit fe38a2b67b
("libceph: start defining message data cursor"). Part of a large
series, it introduced cursor->last_piece and also mistakenly inverted
the hint by passing last_piece for "more". This was corrected with
commit c2cfa19400 ("libceph: Fix ceph_tcp_sendpage()'s more boolean
usage").
As it is, last_piece is not helping at all: because Nagle algorithm is
disabled, for a simple message with two 512-byte data items we end up
emitting three packets: front + first data item, second data item and
footer. Go back to the original pre-fe38a2b67bc6 behavior -- a single
packet in most cases.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
skb_can_coalesce() allows coalescing neighboring slab objects into
a single frag:
return page == skb_frag_page(frag) &&
off == frag->page_offset + skb_frag_size(frag);
ceph_tcp_sendpage() can be handed slab pages. One example of this is
XFS: it passes down sector sized slab objects for its metadata I/O. If
the kernel client is co-located on the OSD node, the skb may go through
loopback and pop on the receive side with the exact same set of frags.
When tcp_recvmsg() attempts to copy out such a frag, hardened usercopy
complains because the size exceeds the object's allocated size:
usercopy: kernel memory exposure attempt detected from ffff9ba917f20a00 (kmalloc-512) (1024 bytes)
Although skb_can_coalesce() could be taught to return false if the
resulting frag would cross a slab object boundary, we already have
a fallback for non-refcounted pages. Utilize it for slab pages too.
Cc: stable@vger.kernel.org # 4.8+
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Pull AFS updates from Al Viro:
"AFS series, with some iov_iter bits included"
* 'work.afs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (26 commits)
missing bits of "iov_iter: Separate type from direction and use accessor functions"
afs: Probe multiple fileservers simultaneously
afs: Fix callback handling
afs: Eliminate the address pointer from the address list cursor
afs: Allow dumping of server cursor on operation failure
afs: Implement YFS support in the fs client
afs: Expand data structure fields to support YFS
afs: Get the target vnode in afs_rmdir() and get a callback on it
afs: Calc callback expiry in op reply delivery
afs: Fix FS.FetchStatus delivery from updating wrong vnode
afs: Implement the YFS cache manager service
afs: Remove callback details from afs_callback_break struct
afs: Commit the status on a new file/dir/symlink
afs: Increase to 64-bit volume ID and 96-bit vnode ID for YFS
afs: Don't invoke the server to read data beyond EOF
afs: Add a couple of tracepoints to log I/O errors
afs: Handle EIO from delivery function
afs: Fix TTL on VL server and address lists
afs: Implement VL server rotation
afs: Improve FS server rotation error handling
...
- a series that fixes some old memory allocation issues in libceph
(myself). We no longer allocate memory in places where allocation
failures cannot be handled and BUG when the allocation fails.
- support for copy_file_range() syscall (Luis Henriques). If size and
alignment conditions are met, it leverages RADOS copy-from operation.
Otherwise, a local copy is performed.
- a patch that reduces memory requirement of ceph_sync_read() from the
size of the entire read to the size of one object (Zheng Yan).
- fallocate() syscall is now restricted to FALLOC_FL_PUNCH_HOLE (Luis
Henriques)
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAlvZ6AcTHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi8H+B/9V/QB1BX5Q2DvkS3mcLNI2NphrppaD
VBuviwoIzaBm1paCrx40J/pCtsK1Fybl5dBAh1W0SDxEGR8JUA8GJw+oemtOS6pZ
DwjOF9S7uhzf5M3nQ9SvAbIudBISMZQRi22Y8fWs3k+yaECIz1J/pe7RiKo/GBAB
NnlbrZ1AYSB02chchVCSmWTApeIRp9JXnaM9xLMJWGVLL/vONjt3ltJ/w9haGYz8
FPFLPFeWobWqFElnOUomxU8Cv84DgPtH8si0UAn16jveractpFJWO4X6LDs/ZYDk
/MccfsB3EK9BCJdLJMoI0/lXxE33z3/MehmJDs9xGSX/N4N7UTF8Ve1b
=U91e
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-4.20-rc1' of git://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"The highlights are:
- a series that fixes some old memory allocation issues in libceph
(myself). We no longer allocate memory in places where allocation
failures cannot be handled and BUG when the allocation fails.
- support for copy_file_range() syscall (Luis Henriques). If size and
alignment conditions are met, it leverages RADOS copy-from
operation. Otherwise, a local copy is performed.
- a patch that reduces memory requirement of ceph_sync_read() from
the size of the entire read to the size of one object (Zheng Yan).
- fallocate() syscall is now restricted to FALLOC_FL_PUNCH_HOLE (Luis
Henriques)"
* tag 'ceph-for-4.20-rc1' of git://github.com/ceph/ceph-client: (25 commits)
ceph: new mount option to disable usage of copy-from op
ceph: support copy_file_range file operation
libceph: support the RADOS copy-from operation
ceph: add non-blocking parameter to ceph_try_get_caps()
libceph: check reply num_data_items in setup_request_data()
libceph: preallocate message data items
libceph, rbd, ceph: move ceph_osdc_alloc_messages() calls
libceph: introduce alloc_watch_request()
libceph: assign cookies in linger_submit()
libceph: enable fallback to ceph_msg_new() in ceph_msgpool_get()
ceph: num_ops is off by one in ceph_aio_retry_work()
libceph: no need to call osd_req_opcode_valid() in osd_req_encode_op()
ceph: set timeout conditionally in __cap_delay_requeue
libceph: don't consume a ref on pagelist in ceph_msg_data_add_pagelist()
libceph: introduce ceph_pagelist_alloc()
libceph: osd_req_op_cls_init() doesn't need to take opcode
libceph: bump CEPH_MSG_MAX_DATA_LEN
ceph: only allow punch hole mode in fallocate
ceph: refactor ceph_sync_read()
ceph: check if LOOKUPNAME request was aborted when filling trace
...
In the iov_iter struct, separate the iterator type from the iterator
direction and use accessor functions to access them in most places.
Convert a bunch of places to use switch-statements to access them rather
then chains of bitwise-AND statements. This makes it easier to add further
iterator types. Also, this can be more efficient as to implement a switch
of small contiguous integers, the compiler can use ~50% fewer compare
instructions than it has to use bitwise-and instructions.
Further, cease passing the iterator type into the iterator setup function.
The iterator function can set that itself. Only the direction is required.
Signed-off-by: David Howells <dhowells@redhat.com>
Add support for performing remote object copies using the 'copy-from'
operation.
[ Add COPY_FROM to get_num_data_items(). ]
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
setup_request_data() adds message data items to both request and reply
messages, but only checks request num_data_items before proceeding with
the loop. This is wrong because if an op doesn't have any request data
items but has a reply data item (e.g. read), a duplicate data item gets
added to the message on every resend attempt.
This went unnoticed for years but now that message data items are
preallocated, it promptly crashes in ceph_msg_data_add(). Amend the
signature to make it clear that setup_request_data() operates on both
request and reply messages. Also, remove data_len assert -- we have
another one in prepare_write_message().
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Currently message data items are allocated with ceph_msg_data_create()
in setup_request_data() inside send_request(). send_request() has never
been allowed to fail, so each allocation is followed by a BUG_ON:
data = ceph_msg_data_create(...);
BUG_ON(!data);
It's been this way since support for multiple message data items was
added in commit 6644ed7b7e ("libceph: make message data be a pointer")
in 3.10.
There is no reason to delay the allocation of message data items until
the last possible moment and we certainly don't need a linked list of
them as they are only ever appended to the end and never erased. Make
ceph_msg_new2() take max_data_items and adapt the rest of the code.
Reported-by: Jerry Lee <leisurelysw24@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The current requirement is that ceph_osdc_alloc_messages() should be
called after oid and oloc are known. In preparation for preallocating
message data items, move ceph_osdc_alloc_messages() further down, so
that it is called when OSD op codes are known.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
ceph_osdc_alloc_messages() call will be moved out of
alloc_linger_request() in the next commit, which means that
ceph_osdc_watch() will need to call ceph_osdc_alloc_messages()
twice. Add a helper for that.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Register lingers directly in linger_submit(). This avoids allocating
memory for notify pagelist while holding osdc->lock and simplifies both
callers of linger_submit().
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
ceph_msgpool_get() can fall back to ceph_msg_new() when it is asked for
a message whose front portion is larger than pool->front_len. However
the caller always passes 0, effectively disabling that code path. The
allocation goes to the message pool and returns a message with a front
that is smaller than requested, setting us up for a crash.
One example of this is a directory with a large number of snapshots.
If its snap context doesn't fit, we oops in encode_request_partial().
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Because send_mds_reconnect() wants to send a message with a pagelist
and pass the ownership to the messenger, ceph_msg_data_add_pagelist()
consumes a ref which is then put in ceph_msg_data_destroy(). This
makes managing pagelists in the OSD client (where they are wrapped in
ceph_osd_data) unnecessarily hard because the handoff only happens in
ceph_osdc_start_request() instead of when the pagelist is passed to
ceph_osd_data_pagelist_init(). I counted several memory leaks on
various error paths.
Fix up ceph_msg_data_add_pagelist() and carry a pagelist ref in
ceph_osd_data.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
struct ceph_pagelist cannot be embedded into anything else because it
has its own refcount. Merge allocation and initialization together.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
In the quest to remove all stack VLA usage from the kernel[1], this
replaces struct crypto_skcipher and SKCIPHER_REQUEST_ON_STACK() usage
with struct crypto_sync_skcipher and SYNC_SKCIPHER_REQUEST_ON_STACK(),
which uses a fixed stack size.
[1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: "Yan, Zheng" <zyan@redhat.com>
Cc: Sage Weil <sage@redhat.com>
Cc: ceph-devel@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
request_key never return NULL,so no need do non-NULL check.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Avoid scribbling over memory if the received reply/challenge is larger
than the buffer supplied with the authorizer.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
Derive the signature from the entire buffer (both AES cipher blocks)
instead of using just the first half of the first block, leaving out
data_crc entirely.
This addresses CVE-2018-1129.
Link: http://tracker.ceph.com/issues/24837
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
When a client authenticates with a service, an authorizer is sent with
a nonce to the service (ceph_x_authorize_[ab]) and the service responds
with a mutation of that nonce (ceph_x_authorize_reply). This lets the
client verify the service is who it says it is but it doesn't protect
against a replay: someone can trivially capture the exchange and reuse
the same authorizer to authenticate themselves.
Allow the service to reject an initial authorizer with a random
challenge (ceph_x_authorize_challenge). The client then has to respond
with an updated authorizer proving they are able to decrypt the
service's challenge and that the new authorizer was produced for this
specific connection instance.
The accepting side requires this challenge and response unconditionally
if the client side advertises they have CEPHX_V2 feature bit.
This addresses CVE-2018-1128.
Link: http://tracker.ceph.com/issues/24836
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
Will be used for encrypting both the initial and updated authorizers.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
Will be used for decrypting the server challenge which is only preceded
by ceph_x_encrypt_header.
Drop struct_v check to allow for extending ceph_x_encrypt_header in the
future.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
Will be used for sending ceph_msg_connect with an updated authorizer,
after the server challenges the initial authorizer.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
We already copy authorizer_reply_buf and authorizer_reply_buf_len into
ceph_connection. Factoring out __prepare_write_connect() requires two
more: authorizer_buf and authorizer_buf_len. Store the pointer to the
handshake in con->auth rather than piling on.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
Remove blank lines at end of file and trailing whitespace.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The request mtime field is used all over ceph, and is currently
represented as a 'timespec' structure in Linux. This changes it to
timespec64 to allow times beyond 2038, modifying all users at the
same time.
[ Remove now redundant ts variable in writepage_nounlock(). ]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
ceph_con_keepalive_expired() is the last user of timespec_add() and some
of the last uses of ktime_get_real_ts(). Replacing this with timespec64
based interfaces lets us remove that deprecated API.
I'm introducing new ceph_encode_timespec64()/ceph_decode_timespec64()
here that take timespec64 structures and convert to/from ceph_timespec,
which is defined to have an unsigned 32-bit tv_sec member. This extends
the range of valid times to year 2106, avoiding the year 2038 overflow.
The ceph file system portion still uses the old functions for inode
timestamps, this will be done separately after the VFS layer is converted.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
There is no reason to continue option parsing after detecting
bad option.
[ Return match_int() errors from ceph_parse_options() to match the
behaviour of parse_rbd_opts_token() and parse_fsopt_token(). ]
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The wire format dictates that payload_len fits into 4 bytes. Take u32
instead of size_t to reflect that.
All callers pass a small integer, so no changes required.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
requests are aborted, improving CephFS ENOSPC handling and making
"umount -f" actually work (Zheng and myself). The rest is mostly
mount option handling cleanups from Chengguang and assorted fixes
from Zheng, Luis and Dongsheng.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJbIkigAAoJEEp/3jgCEfOL3EUH/1s7Ib3FgFzG/SPPKISxZOGr
ndZGg0rPT9mPIQ4rp6t0z/cDlMrluPmCK3sWrAPe//sZz9iZiuip+mCL0gUFXFNr
1kL2xDKkJzGxtP3UlUvr5CC6bnxLdeBXJRBDLk/swtphuqArKndlbN/iLZnCZivT
uJDk+vZTwNJ3UhQP4QdnOQLV60NYs+q4euTqbZF3+pDiRiONbxRfXC3adFsc8zL9
zlie3CHPbrQHWMsfNvbfM3rBH1WhTwEssDm+IEFlKl19q9SKP2WPZfmBcE1pmZ58
AhIMoNGdQha1FXS6N96kaPaqFgeysPnEPoyHDqLxsUMKqsvJlOEZsK1jujza4rE=
=EfXm
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-4.18-rc1' of git://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"The main piece is a set of libceph changes that revamps how OSD
requests are aborted, improving CephFS ENOSPC handling and making
"umount -f" actually work (Zheng and myself).
The rest is mostly mount option handling cleanups from Chengguang and
assorted fixes from Zheng, Luis and Dongsheng.
* tag 'ceph-for-4.18-rc1' of git://github.com/ceph/ceph-client: (31 commits)
rbd: flush rbd_dev->watch_dwork after watch is unregistered
ceph: update description of some mount options
ceph: show ino32 if the value is different with default
ceph: strengthen rsize/wsize/readdir_max_bytes validation
ceph: fix alignment of rasize
ceph: fix use-after-free in ceph_statfs()
ceph: prevent i_version from going back
ceph: fix wrong check for the case of updating link count
libceph: allocate the locator string with GFP_NOFAIL
libceph: make abort_on_full a per-osdc setting
libceph: don't abort reads in ceph_osdc_abort_on_full()
libceph: avoid a use-after-free during map check
libceph: don't warn if req->r_abort_on_full is set
libceph: use for_each_request() in ceph_osdc_abort_on_full()
libceph: defer __complete_request() to a workqueue
libceph: move more code into __complete_request()
libceph: no need to call flush_workqueue() before destruction
ceph: flush pending works before shutdown super
ceph: abort osd requests on force umount
libceph: introduce ceph_osdc_abort_requests()
...
- Use overflow helpers in 2-factor allocators (Kees, Rasmus)
- Introduce overflow test module (Rasmus, Kees)
- Introduce saturating size helper functions (Matthew, Kees)
- Treewide use of struct_size() for allocators (Kees)
-----BEGIN PGP SIGNATURE-----
Comment: Kees Cook <kees@outflux.net>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=/3L8
-----END PGP SIGNATURE-----
Merge tag 'overflow-v4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull overflow updates from Kees Cook:
"This adds the new overflow checking helpers and adds them to the
2-factor argument allocators. And this adds the saturating size
helpers and does a treewide replacement for the struct_size() usage.
Additionally this adds the overflow testing modules to make sure
everything works.
I'm still working on the treewide replacements for allocators with
"simple" multiplied arguments:
*alloc(a * b, ...) -> *alloc_array(a, b, ...)
and
*zalloc(a * b, ...) -> *calloc(a, b, ...)
as well as the more complex cases, but that's separable from this
portion of the series. I expect to have the rest sent before -rc1
closes; there are a lot of messy cases to clean up.
Summary:
- Introduce arithmetic overflow test helper functions (Rasmus)
- Use overflow helpers in 2-factor allocators (Kees, Rasmus)
- Introduce overflow test module (Rasmus, Kees)
- Introduce saturating size helper functions (Matthew, Kees)
- Treewide use of struct_size() for allocators (Kees)"
* tag 'overflow-v4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
treewide: Use struct_size() for devm_kmalloc() and friends
treewide: Use struct_size() for vmalloc()-family
treewide: Use struct_size() for kmalloc()-family
device: Use overflow helpers for devm_kmalloc()
mm: Use overflow helpers in kvmalloc()
mm: Use overflow helpers in kmalloc_array*()
test_overflow: Add memory allocation overflow tests
overflow.h: Add allocation size calculation helpers
test_overflow: Report test failures
test_overflow: macrofy some more, do more tests for free
lib: add runtime test of check_*_overflow functions
compiler.h: enable builtin overflow checkers and add fallback code
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
struct foo {
int stuff;
void *entry[];
};
instance = kmalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL);
Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:
instance = kmalloc(struct_size(instance, entry, count), GFP_KERNEL);
This patch makes the changes for kmalloc()-family (and kvmalloc()-family)
uses. It was done via automatic conversion with manual review for the
"CHECKME" non-standard cases noted below, using the following Coccinelle
script:
// pkey_cache = kmalloc(sizeof *pkey_cache + tprops->pkey_tbl_len *
// sizeof *pkey_cache->table, GFP_KERNEL);
@@
identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc";
expression GFP;
identifier VAR, ELEMENT;
expression COUNT;
@@
- alloc(sizeof(*VAR) + COUNT * sizeof(*VAR->ELEMENT), GFP)
+ alloc(struct_size(VAR, ELEMENT, COUNT), GFP)
// mr = kzalloc(sizeof(*mr) + m * sizeof(mr->map[0]), GFP_KERNEL);
@@
identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc";
expression GFP;
identifier VAR, ELEMENT;
expression COUNT;
@@
- alloc(sizeof(*VAR) + COUNT * sizeof(VAR->ELEMENT[0]), GFP)
+ alloc(struct_size(VAR, ELEMENT, COUNT), GFP)
// Same pattern, but can't trivially locate the trailing element name,
// or variable name.
@@
identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc";
expression GFP;
expression SOMETHING, COUNT, ELEMENT;
@@
- alloc(sizeof(SOMETHING) + COUNT * sizeof(ELEMENT), GFP)
+ alloc(CHECKME_struct_size(&SOMETHING, ELEMENT, COUNT), GFP)
Signed-off-by: Kees Cook <keescook@chromium.org>
calc_target() isn't supposed to fail with anything but POOL_DNE, in
which case we report that the pool doesn't exist and fail the request
with -ENOENT. Doing this for -ENOMEM is at the very least confusing
and also harmful -- as the preceding requests complete, a short-lived
locator string allocation is likely to succeed after a wait.
(We used to call ceph_object_locator_to_pg() for a pi lookup. In
theory that could fail with -ENOENT, hence the "ret != -ENOENT" warning
being removed.)
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The intent behind making it a per-request setting was that it would be
set for writes, but not for reads. As it is, the flag is set for all
fs/ceph requests except for pool perm check stat request (technically
a read).
ceph_osdc_abort_on_full() skips reads since the previous commit and
I don't see a use case for marking individual requests.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Don't consider reads for aborting and use ->base_oloc instead of
->target_oloc, as done in __submit_request().
Strictly speaking, we shouldn't be aborting FULL_TRY/FULL_FORCE writes
either. But, there is an inconsistency in FULL_TRY/FULL_FORCE handling
on the OSD side [1], so given that neither of these is used in the
kernel client, leave it for when the OSD behaviour is sorted out.
[1] http://tracker.ceph.com/issues/24339
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Sending map check after complete_request() was called is not only
useless, but can lead to a use-after-free as req->r_kref decrement in
__complete_request() races with map check code.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
The "FULL or reached pool quota" warning is there to explain paused
requests. No need to emit it if pausing isn't going to occur.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Scanning the trees just to see if there is anything to abort is
unnecessary -- all that is needed here is to update the epoch barrier
first, before we start aborting. Simplify and do the update inside the
loop before calling abort_request() for the first time.
The switch to for_each_request() also fixes a bug: homeless requests
weren't even considered for aborting.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
In the common case, req->r_callback is called by handle_reply() on the
ceph-msgr worker thread without any locks. If handle_reply() fails, it
is called with both osd->lock and osdc->lock. In the map check case,
it is called with just osdc->lock but held for write. Finally, if the
request is aborted because of -ENOSPC or by ceph_osdc_abort_requests(),
it is called directly on the submitter's thread, again with both locks.
req->r_callback on the submitter's thread is relatively new (introduced
in 4.12) and ripe for deadlocks -- e.g. writeback worker thread waiting
on itself:
inode_wait_for_writeback+0x26/0x40
evict+0xb5/0x1a0
iput+0x1d2/0x220
ceph_put_wrbuffer_cap_refs+0xe0/0x2c0 [ceph]
writepages_finish+0x2d3/0x410 [ceph]
__complete_request+0x26/0x60 [libceph]
complete_request+0x2e/0x70 [libceph]
__submit_request+0x256/0x330 [libceph]
submit_request+0x2b/0x30 [libceph]
ceph_osdc_start_request+0x25/0x40 [libceph]
ceph_writepages_start+0xdfe/0x1320 [ceph]
do_writepages+0x1f/0x70
__writeback_single_inode+0x45/0x330
writeback_sb_inodes+0x26a/0x600
__writeback_inodes_wb+0x92/0xc0
wb_writeback+0x274/0x330
wb_workfn+0x2d5/0x3b0
Defer __complete_request() to a workqueue in all failure cases so it's
never on the same thread as ceph_osdc_start_request() and always called
with no locks held.
Link: http://tracker.ceph.com/issues/23978
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Ilya Dryomov
Dongsheng Yang
Linus Torvalds
David Howells
Luis Henriques
Kees Cook
YueHaibing
Stephen Hemminger
Arnd Bergmann
Chengguang Xu