Since tracing/*probe_events will accept a probe definition
up to 4096 - 2 ('\n' and '\0') bytes, it must show 4094 instead
of 4096 in warning message.
Note that there is one possible case of exceed 4094. If user
prepare 4096 bytes null-terminated string and syscall write
it with the count == 4095, then it can be accepted. However,
if user puts a '\n' after that, it must rejected.
So IMHO, the warning message should indicate shorter one,
since it is safer.
Link: http://lkml.kernel.org/r/148673290462.2579.7966778294009665632.stgit@devbox
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Show "trace_probe:", "trace_kprobe:" and "trace_uprobe:"
headers for each warning/error/info message. This will
help people to notice that kprobe/uprobe events caused
those messages.
Link: http://lkml.kernel.org/r/148646647813.24658.16705315294927615333.stgit@devbox
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The code in traceprobe_probes_write() reads up to 4096 bytes from userpace
for each line. If userspace passes in several lines to execute, the code
will do a large read for each line, even though, it is highly likely that
the first read from userspace received all of the lines at once.
I changed the logic to do a single read from userspace, and to only read
from userspace again if not all of the read from userspace made it in.
I tested this by adding printk()s and writing files that would test -1, ==,
and +1 the buffer size, to make sure that there's no overflows and that if a
single line is written with +1 the buffer size, that it fails properly.
Link: http://lkml.kernel.org/r/20170209180458.5c829ab2@gandalf.local.home
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Change kprobe/uprobe-tracer to show the arguments type-casted
with u8/u16/u32/u64 in decimal digits instead of hexadecimal.
To minimize compatibility issue, the arguments without type
casting are typed by x64 (or x32 for 32bit arch) by default.
Note: all arguments set by old perf probe without types are
shown in decimal by default.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Naohiro Aota <naohiro.aota@hgst.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/147151076135.12957.14684546093034343894.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add x8/x16/x32/x64 for hexadecimal type casting to kprobe/uprobe event
tracer.
These type casts can be used for integer arguments for explicitly
showing them in hexadecimal digits in formatted text.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Naohiro Aota <naohiro.aota@hgst.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/147151067029.12957.11591314629326414783.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
ftrace is very quick to give up on saving the task command line (see
`trace_save_cmdline()`). The workaround for events which really care
about the command line is to explicitly assign it as part of the entry.
However, this doesn't work for kprobe events, as there's no
straightforward way to get access to current->comm. Add a kprobe/uprobe
event variable $comm which provides exactly that.
Link: http://lkml.kernel.org/r/f59b472033b943a370f5f48d0af37698f409108f.1465435894.git.osandov@fb.com
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Use the more common logging method with the eventual goal of removing
pr_warning altogether.
Miscellanea:
- Realign arguments
- Coalesce formats
- Add missing space between a few coalesced formats
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> [kernel/power/suspend.c]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The commit that added a check for this to checkpatch says:
"Using weak declarations can have unintended link defects. The __weak on
the declaration causes non-weak definitions to become weak."
In this case, when a PowerPC kernel is built with CONFIG_KPROBE_EVENT
but not CONFIG_UPROBE_EVENT, it generates the following warning:
WARNING: 1 bad relocations
c0000000014f2190 R_PPC64_ADDR64 uprobes_fetch_type_table
This is fixed by passing the fetch_table arrays to
traceprobe_parse_probe_arg() which also means that they can never be NULL.
Link: http://lkml.kernel.org/r/20150312165834.4482cb48@canb.auug.org.au
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The functions trace_seq_printf() and friends will soon not have a return
value and will only be a void function. Use trace_seq_has_overflowed()
instead to know if the trace_seq operations succeeded or not.
Link: http://lkml.kernel.org/r/20141114011411.530216306@goodmis.org
Reviewed-by: Petr Mladek <pmladek@suse.cz>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Use NOKPROBE_SYMBOL macro to protect functions from
kprobes instead of __kprobes annotation in ftrace.
This applies nokprobe_inline annotation for some cases,
because NOKPROBE_SYMBOL() will inhibit inlining by
referring the symbol address.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20140417081828.26341.55152.stgit@ltc230.yrl.intra.hitachi.co.jp
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There is no need to prohibit probing on the functions
used for preparation and uprobe only fetch functions.
Those are safely probed because those are not invoked
from kprobe's breakpoint/fault/debug handlers. So there
is no chance to cause recursive exceptions.
Following functions are now removed from the kprobes blacklist:
update_bitfield_fetch_param
free_bitfield_fetch_param
kprobe_register
FETCH_FUNC_NAME(stack, type) in trace_uprobe.c
FETCH_FUNC_NAME(memory, type) in trace_uprobe.c
FETCH_FUNC_NAME(memory, string) in trace_uprobe.c
FETCH_FUNC_NAME(memory, string_size) in trace_uprobe.c
FETCH_FUNC_NAME(file_offset, type) in trace_uprobe.c
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20140417081800.26341.56504.stgit@ltc230.yrl.intra.hitachi.co.jp
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Enable to fetch data from a file offset. Currently it only supports
fetching from same binary uprobe set. It'll translate the file offset
to a proper virtual address in the process.
The syntax is "@+OFFSET" as it does similar to normal memory fetching
(@ADDR) which does no address translation.
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Enable to fetch other types of argument for the uprobes. IOW, we can
access stack, memory, deref, bitfield and retval from uprobes now.
The format for the argument types are same as kprobes (but @SYMBOL
type is not supported for uprobes), i.e:
@ADDR : Fetch memory at ADDR
$stackN : Fetch Nth entry of stack (N >= 0)
$stack : Fetch stack address
$retval : Fetch return value
+|-offs(FETCHARG) : Fetch memory at FETCHARG +|- offs address
Note that the retval only can be used with uretprobes.
Original-patch-by: Hyeoncheol Lee <cheol.lee@lge.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Hyeoncheol Lee <cheol.lee@lge.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Use separate method to fetch from memory. Move existing functions to
trace_kprobe.c and make them static. Also add new memory fetch
implementation for uprobes.
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The deref fetch methods access a memory region but it assumes that
it's a kernel memory since uprobes does not support them.
Add ->fetch and ->fetch_size member in order to provide a proper
access methods for supporting uprobes.
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Hyeoncheol Lee <cheol.lee@lge.com>
[namhyung@kernel.org: Split original patch into pieces as requested]
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Move existing functions to trace_kprobe.c and add NULL entries to the
uprobes fetch type table. I don't make them static since some generic
routines like update/free_XXX_fetch_param() require pointers to the
functions.
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Use separate method to fetch from stack. Move existing functions to
trace_kprobe.c and make them static. Also add new stack fetch
implementation for uprobes.
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Use separate fetch_type_table for kprobes and uprobes. It currently
shares all fetch methods but some of them will be implemented
differently later.
This is not to break build if [ku]probes is configured alone (like
!CONFIG_KPROBE_EVENT and CONFIG_UPROBE_EVENT). So I added '__weak'
to the table declaration so that it can be safely omitted when it
configured out.
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Move fetch function helper macros/functions to the header file and
make them external. This is preparation of supporting uprobe fetch
table in next patch.
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The set_print_fmt() functions are implemented almost same for
[ku]probes. Move it to a common place and get rid of the duplication.
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The print format of s32 type was "ld" and it's casted to "long". So
it turned out to print 4294967295 for "-1" on 64-bit systems. Not
sure whether it worked well on 32-bit systems.
Anyway, it doesn't need to have cast argument at all since it already
casted using type pointer - just get rid of it. Thanks to Oleg for
pointing that out.
And print 0x prefix for unsigned type as it shows hex numbers.
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Implements trace_event support for uprobes. In its current form
it can be used to put probes at a specified offset in a file and
dump the required registers when the code flow reaches the
probed address.
The following example shows how to dump the instruction pointer
and %ax a register at the probed text address. Here we are
trying to probe zfree in /bin/zsh:
# cd /sys/kernel/debug/tracing/
# cat /proc/`pgrep zsh`/maps | grep /bin/zsh | grep r-xp
00400000-0048a000 r-xp 00000000 08:03 130904 /bin/zsh
# objdump -T /bin/zsh | grep -w zfree
0000000000446420 g DF .text 0000000000000012 Base
zfree # echo 'p /bin/zsh:0x46420 %ip %ax' > uprobe_events
# cat uprobe_events
p:uprobes/p_zsh_0x46420 /bin/zsh:0x0000000000046420
# echo 1 > events/uprobes/enable
# sleep 20
# echo 0 > events/uprobes/enable
# cat trace
# tracer: nop
#
# TASK-PID CPU# TIMESTAMP FUNCTION
# | | | | |
zsh-24842 [006] 258544.995456: p_zsh_0x46420: (0x446420) arg1=446421 arg2=79
zsh-24842 [007] 258545.000270: p_zsh_0x46420: (0x446420) arg1=446421 arg2=79
zsh-24842 [002] 258545.043929: p_zsh_0x46420: (0x446420) arg1=446421 arg2=79
zsh-24842 [004] 258547.046129: p_zsh_0x46420: (0x446420) arg1=446421 arg2=79
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com>
Cc: Linux-mm <linux-mm@kvack.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Anton Arapov <anton@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120411103043.GB29437@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Move parts of trace_kprobe.c that can be shared with upcoming
trace_uprobe.c. Common code to kernel/trace/trace_probe.h and
kernel/trace/trace_probe.c. There are no functional changes.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com>
Cc: Linux-mm <linux-mm@kvack.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Anton Arapov <anton@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120409091144.8343.76218.sendpatchset@srdronam.in.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Masami Hiramatsu
Steven Rostedt (VMware)
Omar Sandoval
Joe Perches
Stephen Rothwell
Masami Hiramatsu
Namhyung Kim
Hyeoncheol Lee
Daniel Walter
Srikar Dronamraju