By now, bmap() will either return the physical block number related to
the requested file offset or 0 in case of error or the requested offset
maps into a hole.
This patch makes the needed changes to enable bmap() to proper return
errors, using the return value as an error return, and now, a pointer
must be passed to bmap() to be filled with the mapped physical block.
It will change the behavior of bmap() on return:
- negative value in case of error
- zero on success or map fell into a hole
In case of a hole, the *block will be zero too
Since this is a prep patch, by now, the only error return is -EINVAL if
->bmap doesn't exist.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
__jbd2_journal_abort_hard() is no longer used, so now we can merge
__jbd2_journal_abort_hard() and __journal_abort_soft() these two
functions into jbd2_journal_abort() and remove them.
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191204124614.45424-5-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Commit fb7c02445c ("ext4: pass -ESHUTDOWN code to jbd2 layer") want
to allow jbd2 layer to distinguish shutdown journal abort from other
error cases. So the ESHUTDOWN should be taken precedence over any other
errno which has already been recoded after EXT4_FLAGS_SHUTDOWN is set,
but it only update errno in the journal suoerblock now if the old errno
is 0.
Fixes: fb7c02445c ("ext4: pass -ESHUTDOWN code to jbd2 layer")
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191204124614.45424-4-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
JBD2_REC_ERR flag used to indicate the errno has been updated when jbd2
aborted, and then __ext4_abort() and ext4_handle_error() can invoke
panic if ERRORS_PANIC is specified. But if the journal has been aborted
with zero errno, jbd2_journal_abort() didn't set this flag so we can
no longer panic. Fix this by always record the proper errno in the
journal superblock.
Fixes: 4327ba52af ("ext4, jbd2: ensure entering into panic after recording an error in superblock")
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191204124614.45424-3-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We invoke jbd2_journal_abort() to abort the journal and record errno
in the jbd2 superblock when committing journal transaction besides the
failure on submitting the commit record. But there is no need for the
case and we can also invoke jbd2_journal_abort() instead of
__jbd2_journal_abort_hard().
Fixes: 818d276ceb ("ext4: Add the journal checksum feature")
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191204124614.45424-2-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Only when jh->b_jcount = 0 in jbd2_journal_put_journal_head, we are allowed
to call __journal_remove_journal_head. This assertion is meaningless,
just remove it.
Signed-off-by: Shijie Luo <luoshijie1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200123070054.50585-1-luoshijie1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If the journal is dirty when the filesystem is mounted, jbd2 will replay
the journal but the journal superblock will not be updated by
journal_reset() because JBD2_ABORT flag is still set (it was set in
journal_init_common()). This is problematic because when a new transaction
is then committed, it will be recorded in block 1 (journal->j_tail was set
to 1 in journal_reset()). If unclean shutdown happens again before the
journal superblock is updated, the new recorded transaction will not be
replayed during the next mount (because of stale sb->s_start and
sb->s_sequence values) which can lead to filesystem corruption.
Fixes: 85e0c4e89c ("jbd2: if the journal is aborted then don't allow update of the log tail")
Signed-off-by: Kai Li <li.kai4@h3c.com>
Link: https://lore.kernel.org/r/20200111022542.5008-1-li.kai4@h3c.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
* Direct I/O via iomap (required the iomap-for-next branch from Darrick
as a prereq).
* Support for using dioread-nolock where the block size < page size.
* Support for encryption for file systems where the block size < page size.
* Rework of journal credits handling so a revoke-heavy workload will
not cause the journal to run out of space.
* Replace bit-spinlocks with spinlocks in jbd2
Also included were some bug fixes and cleanups, mostly to clean up
corner cases from fuzzed file systems and error path handling.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAl3dHxoACgkQ8vlZVpUN
gaMZswf5AbtQhTEJDXO7Pc1ull38GIGFgAv7uAth0TymLC3h1/FEYWW0crEPFsDr
1Eei55UUVOYrMMUKQ4P7wlLX0cIh3XDPMWnRFuqBoV5/ZOsH/ZSbkY//TG2Xze/v
9wXIH/RKQnzbRtXffJ1+DnvmXJk+HFm1R1gjl0nfyUXGrnlSfqJxhLSczyd6bJJq
ehi/tso5UC/4EQsAIdWp7VWsAdaHcZ7ogHqDoy8dXpM1equ408iml7VlKr8R+Nr7
5ANpCISXChSlLLYm0NYN5vhO8upF5uDxWLdCtxVPL5kFdM2m/ELjXw9h9C+78l7C
EWJGlGlxvx07Px+e+bfStEsoixpWBg==
=0eko
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"This merge window saw the the following new featuers added to ext4:
- Direct I/O via iomap (required the iomap-for-next branch from
Darrick as a prereq).
- Support for using dioread-nolock where the block size < page size.
- Support for encryption for file systems where the block size < page
size.
- Rework of journal credits handling so a revoke-heavy workload will
not cause the journal to run out of space.
- Replace bit-spinlocks with spinlocks in jbd2
Also included were some bug fixes and cleanups, mostly to clean up
corner cases from fuzzed file systems and error path handling"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (59 commits)
ext4: work around deleting a file with i_nlink == 0 safely
ext4: add more paranoia checking in ext4_expand_extra_isize handling
jbd2: make jbd2_handle_buffer_credits() handle reserved handles
ext4: fix a bug in ext4_wait_for_tail_page_commit
ext4: bio_alloc with __GFP_DIRECT_RECLAIM never fails
ext4: code cleanup for get_next_id
ext4: fix leak of quota reservations
ext4: remove unused variable warning in parse_options()
ext4: Enable encryption for subpage-sized blocks
fs/buffer.c: support fscrypt in block_read_full_page()
ext4: Add error handling for io_end_vec struct allocation
jbd2: Fine tune estimate of necessary descriptor blocks
jbd2: Provide trace event for handle restarts
ext4: Reserve revoke credits for freed blocks
jbd2: Make credit checking more strict
jbd2: Rename h_buffer_credits to h_total_credits
jbd2: Reserve space for revoke descriptor blocks
jbd2: Drop jbd2_space_needed()
jbd2: Account descriptor blocks into t_outstanding_credits
jbd2: Factor out common parts of stopping and restarting a handle
...
Currently we reserve j_max_transaction_buffers / 32 for transaction
descriptor blocks. Now that revoke descriptors are accounted for
separately this estimate is unnecessarily high and we can actually
compute much tighter estimate. In the common case of 32k journal blocks
and 4k blocksize this actually reduces the amount of reserved descriptor
blocks from 256 to ~25 which allows us to fit more real data into a
transaction.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191105164437.32602-25-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Provide trace event for handle restarts to ease debugging.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191105164437.32602-24-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Make checking of available credits in jbd2_journal_dirty_metadata() more
strict. There should be always enough credits in the handle to write all
potential revoke descriptors. Also we warn in case there are not enough
credits since this is a bug in the filesystem.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191105164437.32602-22-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The credit counter now contains both buffer and revoke descriptor block
credits. Rename to counter to h_total_credits to reflect that. No
functional change.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191105164437.32602-21-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Extend functions for starting, extending, and restarting transaction
handles to take number of revoke records handle must be able to
accommodate. These functions then make sure transaction has enough
credits to be able to store resulting revoke descriptor blocks. Also
revoke code tracks number of revoke records created by a handle to catch
situation where some place didn't reserve enough space for revoke
records. Similarly to standard transaction credits, space for unused
reserved revoke records is released when the handle is stopped.
On the ext4 side we currently take a simplistic approach of reserving
space for 1024 revoke records for any transaction. This grows amount of
credits reserved for each handle only by a few and is enough for any
normal workload so that we don't hit warnings in jbd2. We will refine
the logic in following commits.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191105164437.32602-20-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The function is now just a trivial wrapper returning
journal->j_max_transaction_buffers. Drop it.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191105164437.32602-19-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently, journal descriptor blocks were not accounted in
transaction->t_outstanding_credits and we were just leaving some slack
space in the journal for them (in jbd2_log_space_left() and
jbd2_space_needed()). This is making proper accounting (and reservation
we want to add) of descriptor blocks difficult so switch to accounting
descriptor blocks in transaction->t_outstanding_credits and just reserve
the same amount of credits in t_outstanding credits for journal
descriptor blocks when creating transaction.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191105164437.32602-18-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
jbd2__journal_restart() has quite some code that is common with
jbd2_journal_stop(). Factor this functionality into stop_this_handle()
helper and use it from both functions. Note that this also drops
t_handle_lock protection from jbd2__journal_restart() as
jbd2_journal_stop() does the same thing without it.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191105164437.32602-17-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When we drop last handle from a transaction and journal->j_barrier_count
> 0, jbd2_journal_stop() wakes up journal->j_wait_transaction_locked
wait queue. This looks pointless - wait for outstanding handles always
happens on journal->j_wait_updates waitqueue.
journal->j_wait_transaction_locked is used to wait for transaction state
changes and by start_this_handle() for waiting until
journal->j_barrier_count drops to 0. The first case is clearly
irrelevant here since only jbd2 thread changes transaction state. The
second case looks related but jbd2_journal_unlock_updates() is
responsible for the wakeup in this case. So just drop the wakeup.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191105164437.32602-16-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If a transaction is larger than journal->j_max_transaction_buffers, that
is a bug and not a trigger for transaction commit. Also the very next
attempt to start new handle will start transaction commit anyway. So
just remove the pointless check. Arguably, we could start transaction
commit whenever the transaction size is *close* to
journal->j_max_transaction_buffers. This has a potential to reduce
latency of the next jbd2_journal_start() at the cost of somewhat smaller
transactions. However for this to have any effect, it would mean that
there isn't someone already waiting in jbd2_journal_start() which means
metadata load for the fs is pretty light anyway so probably this
optimization is not worth it.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191105164437.32602-15-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Move code in jbd2_journal_stop() around a bit. It removes some
unnecessary code duplication and will make factoring out parts common
with jbd2__journal_restart() easier.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191105164437.32602-14-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
jbd2 statistics counting number of blocks logged in a transaction was
wrong. It didn't count the commit block and more importantly it didn't
count revoke descriptor blocks. Make sure these get properly counted.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191105164437.32602-13-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
With 32-bit block numbers, we don't allocate the array for journal
buffer heads large enough for corresponding descriptor tags to fill the
descriptor block. Thus we end up writing out half-full descriptor blocks
to the journal unnecessarily growing the transaction. Fix the logic to
allocate the array large enough.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191105164437.32602-3-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
jbd2_journal_next_log_block() does not look at
transaction->t_outstanding_credits. Remove the misleading comment.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191105164437.32602-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
On PREEMPT_RT bit-spinlocks have the same semantics as on PREEMPT_RT=n,
i.e. they disable preemption. That means functions which are not safe to be
called in preempt disabled context on RT trigger a might_sleep() assert.
The journal head bit spinlock is mostly held for short code sequences with
trivial RT safe functionality, except for one place:
jbd2_journal_put_journal_head() invokes __journal_remove_journal_head()
with the journal head bit spinlock held. __journal_remove_journal_head()
invokes kmem_cache_free() which must not be called with preemption disabled
on RT.
Jan suggested to rework the removal function so the actual free happens
outside the bit-spinlocked region.
Split it into two parts:
- Do the sanity checks and the buffer head detach under the lock
- Do the actual free after dropping the lock
There is error case handling in the free part which needs to dereference
the b_size field of the now detached buffer head. Due to paranoia (caused
by ignorance) the size is retrieved in the detach function and handed into
the free function. Might be over-engineered, but better safe than sorry.
This makes the journal head bit-spinlock usage RT compliant and also avoids
nested locking which is not covered by lockdep.
Suggested-by: Jan Kara <jack@suse.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-ext4@vger.kernel.org
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Jan Kara <jack@suse.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20190809124233.13277-8-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Bit-spinlocks are problematic on PREEMPT_RT if functions which might sleep
on RT, e.g. spin_lock(), alloc/free(), are invoked inside the lock held
region because bit spinlocks disable preemption even on RT.
A first attempt was to replace state lock with a spinlock placed in struct
buffer_head and make the locking conditional on PREEMPT_RT and
DEBUG_BIT_SPINLOCKS.
Jan pointed out that there is a 4 byte hole in struct journal_head where a
regular spinlock fits in and he would not object to convert the state lock
to a spinlock unconditionally.
Aside of solving the RT problem, this also gains lockdep coverage for the
journal head state lock (bit-spinlocks are not covered by lockdep as it's
hard to fit a lockdep map into a single bit).
The trivial change would have been to convert the jbd_*lock_bh_state()
inlines, but that comes with the downside that these functions take a
buffer head pointer which needs to be converted to a journal head pointer
which adds another level of indirection.
As almost all functions which use this lock have a journal head pointer
readily available, it makes more sense to remove the lock helper inlines
and write out spin_*lock() at all call sites.
Fixup all locking comments as well.
Suggested-by: Jan Kara <jack@suse.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Jan Kara <jack@suse.com>
Cc: linux-ext4@vger.kernel.org
Link: https://lore.kernel.org/r/20190809124233.13277-7-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
jbd2_journal_forget() jumps to 'not_jbd' branch which calls __bforget()
in cases where the buffer is clean which is pointless. In case of failed
assertion, it can be even argued that it is safer not to touch buffer's
dirty bits. Also logically it makes more sense to just jump to 'drop'
and that will make logic also simpler when we switch bh_state_lock to a
spinlock.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20190809124233.13277-6-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We have cleared both dirty & jbddirty bits from the bh. So there's no
difference between bforget() and brelse(). Thus there's no point jumping
to no_jbd branch.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20190809124233.13277-5-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
__jbd2_journal_unfile_buffer() and __jbd2_journal_refile_buffer() drop
transaction's jh reference when they remove jh from a transaction. This
will be however inconvenient once we move state lock into journal_head
itself as we still need to unlock it and we'd need to grab jh reference
just for that. Move dropping of jh reference out of these functions into
the few callers.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20190809124233.13277-4-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
journal_unmap_buffer() checks first whether the buffer head is a journal.
If so it takes locks and then invokes jbd2_journal_grab_journal_head()
followed by another check whether this is journal head buffer.
The double checking is pointless.
Replace the initial check with jbd2_journal_grab_journal_head() which
alredy checks whether the buffer head is actually a journal.
Allows also early access to the journal head pointer for the upcoming
conversion of state lock to a regular spinlock.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: linux-ext4@vger.kernel.org
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20190809124233.13277-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Since ext4/ocfs2 are using jbd2_inode dirty range scoping APIs now,
jbd2_journal_inode_add_[write|wait] are not used any more, remove them.
Link: http://lkml.kernel.org/r/1562977611-8412-2-git-send-email-joseph.qi@linux.alibaba.com
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: Ross Zwisler <zwisler@google.com>
Acked-by: Changwei Ge <chge@linux.alibaba.com>
Cc: Gang He <ghe@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This issue was found when I use ebpf to trace every jbd2
handle's running info in dioread_nolock case.
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When executing generic/388 on a ppc64le machine, we notice the following
call trace,
VFS: brelse: Trying to free free buffer
WARNING: CPU: 0 PID: 6637 at /root/repos/linux/fs/buffer.c:1195 __brelse+0x84/0xc0
Call Trace:
__brelse+0x80/0xc0 (unreliable)
invalidate_bh_lru+0x78/0xc0
on_each_cpu_mask+0xa8/0x130
on_each_cpu_cond_mask+0x130/0x170
invalidate_bh_lrus+0x44/0x60
invalidate_bdev+0x38/0x70
ext4_put_super+0x294/0x560
generic_shutdown_super+0xb0/0x170
kill_block_super+0x38/0xb0
deactivate_locked_super+0xa4/0xf0
cleanup_mnt+0x164/0x1d0
task_work_run+0x110/0x160
do_notify_resume+0x414/0x460
ret_from_except_lite+0x70/0x74
The warning happens because flush_descriptor() drops bh reference it
does not own. The bh reference acquired by
jbd2_journal_get_descriptor_buffer() is owned by the log_bufs list and
gets released when this list is processed. The reference for doing IO is
only acquired in write_dirty_buffer() later in flush_descriptor().
Reported-by: Harish Sriram <harish@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chandan Rajendra <chandan@linux.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The journal_sync_buffer() function was never carried over from jbd to
jbd2. So get rid of the vestigal declaration of this (non-existent)
function.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Currently both journal_submit_inode_data_buffers() and
journal_finish_inode_data_buffers() operate on the entire address space
of each of the inodes associated with a given journal entry. The
consequence of this is that if we have an inode where we are constantly
appending dirty pages we can end up waiting for an indefinite amount of
time in journal_finish_inode_data_buffers() while we wait for all the
pages under writeback to be written out.
The easiest way to cause this type of workload is do just dd from
/dev/zero to a file until it fills the entire filesystem. This can
cause journal_finish_inode_data_buffers() to wait for the duration of
the entire dd operation.
We can improve this situation by scoping each of the inode dirty ranges
associated with a given transaction. We do this via the jbd2_inode
structure so that the scoping is contained within jbd2 and so that it
follows the lifetime and locking rules for that structure.
This allows us to limit the writeback & wait in
journal_submit_inode_data_buffers() and
journal_finish_inode_data_buffers() respectively to the dirty range for
a given struct jdb2_inode, keeping us from waiting forever if the inode
in question is still being appended to.
Signed-off-by: Ross Zwisler <zwisler@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@vger.kernel.org
There are some print format mistakes in debug messages. Fix them.
Signed-off-by: Gaowei Pu <pugaowei@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When failing from creating cache jbd2_inode_cache, we will destroy the
previously created cache jbd2_handle_cache twice. This patch fixes
this by moving each cache initialization/destruction to its own
separate, individual function.
Signed-off-by: Chengguang Xu <cgxu519@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
We hit a BUG at fs/buffer.c:3057 if we detached the nbd device
before unmounting ext4 filesystem.
The typical chain of events leading to the BUG:
jbd2_write_superblock
submit_bh
submit_bh_wbc
BUG_ON(!buffer_mapped(bh));
The block device is removed and all the pages are invalidated. JBD2
was trying to write journal superblock to the block device which is
no longer present.
Fix this by checking the journal superblock's buffer head prior to
submitting.
Reported-by: Eric Ren <renzhen@linux.alibaba.com>
Signed-off-by: Jiufei Xue <jiufei.xue@linux.alibaba.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@kernel.org
At the beginning, nblocks has been assigned. There is no need
to repeat the assignment in the while loop, and remove it.
Signed-off-by: Liu Song <liu.song11@zte.com.cn>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
In jbd2_get_transaction, a new transaction is initialized,
and set to the j_running_transaction. No need for a return
value, so remove it.
Also, adjust some comments to match the actual operation
of this function.
Signed-off-by: Liu Song <liu.song11@zte.com.cn>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
In jbd2_journal_commit_transaction(), if we are in abort mode,
we may flush the buffer without setting descriptor block checksum
by goto start_journal_io. Then fs is mounted,
jbd2_descriptor_block_csum_verify() failed.
[ 271.379811] EXT4-fs (vdd): shut down requested (2)
[ 271.381827] Aborting journal on device vdd-8.
[ 271.597136] JBD2: Invalid checksum recovering block 22199 in log
[ 271.598023] JBD2: recovery failed
[ 271.598484] EXT4-fs (vdd): error loading journal
Fix this problem by keep setting descriptor block checksum if the
descriptor buffer is not NULL.
This checksum problem can be reproduced by xfstests generic/388.
Signed-off-by: luojiajun <luojiajun3@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
The jh pointer may be used uninitialized in the two cases below and the
compiler complain about it when enabling JBUFFER_TRACE macro, fix them.
In file included from fs/jbd2/transaction.c:19:0:
fs/jbd2/transaction.c: In function ‘jbd2_journal_get_undo_access’:
./include/linux/jbd2.h:1637:38: warning: ‘jh’ is used uninitialized in this function [-Wuninitialized]
#define JBUFFER_TRACE(jh, info) do { printk("%s: %d\n", __func__, jh->b_jcount);} while (0)
^
fs/jbd2/transaction.c:1219:23: note: ‘jh’ was declared here
struct journal_head *jh;
^
In file included from fs/jbd2/transaction.c:19:0:
fs/jbd2/transaction.c: In function ‘jbd2_journal_dirty_metadata’:
./include/linux/jbd2.h:1637:38: warning: ‘jh’ may be used uninitialized in this function [-Wmaybe-uninitialized]
#define JBUFFER_TRACE(jh, info) do { printk("%s: %d\n", __func__, jh->b_jcount);} while (0)
^
fs/jbd2/transaction.c:1332:23: note: ‘jh’ was declared here
struct journal_head *jh;
^
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
The functions jbd2_superblock_csum_verify() and
jbd2_superblock_csum_set() only get called from one location, so to
simplify things, fold them into their callers.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The jbd2 superblock is lockless now, so there is probably a race
condition between writing it so disk and modifing contents of it, which
may lead to checksum error. The following race is the one case that we
have captured.
jbd2 fsstress
jbd2_journal_commit_transaction
jbd2_journal_update_sb_log_tail
jbd2_write_superblock
jbd2_superblock_csum_set jbd2_journal_revoke
jbd2_journal_set_features(revork)
modify superblock
submit_bh(checksum incorrect)
Fix this by locking the buffer head before modifing it. We always
write the jbd2 superblock after we modify it, so this just means
calling the lock_buffer() a little earlier.
This checksum corruption problem can be reproduced by xfstests
generic/475.
Reported-by: zhangyi (F) <yi.zhang@huawei.com>
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We do not unmap and clear dirty flag when forgetting a buffer without
journal or does not belongs to any transaction, so the invalid dirty
data may still be written to the disk later. It's fine if the
corresponding block is never used before the next mount, and it's also
fine that we invoke clean_bdev_aliases() related functions to unmap
the block device mapping when re-allocating such freed block as data
block. But this logic is somewhat fragile and risky that may lead to
data corruption if we forget to clean bdev aliases. So, It's better to
discard dirty data during forget time.
We have been already handled all the cases of forgetting journalled
buffer, this patch deal with the remaining two cases.
- buffer is not journalled yet,
- buffer is journalled but doesn't belongs to any transaction.
We invoke __bforget() instead of __brelese() when forgetting an
un-journalled buffer in jbd2_journal_forget(). After this patch we can
remove all clean_bdev_aliases() related calls in ext4.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Now, we capture a data corruption problem on ext4 while we're truncating
an extent index block. Imaging that if we are revoking a buffer which
has been journaled by the committing transaction, the buffer's jbddirty
flag will not be cleared in jbd2_journal_forget(), so the commit code
will set the buffer dirty flag again after refile the buffer.
fsx kjournald2
jbd2_journal_commit_transaction
jbd2_journal_revoke commit phase 1~5...
jbd2_journal_forget
belongs to older transaction commit phase 6
jbddirty not clear __jbd2_journal_refile_buffer
__jbd2_journal_unfile_buffer
test_clear_buffer_jbddirty
mark_buffer_dirty
Finally, if the freed extent index block was allocated again as data
block by some other files, it may corrupt the file data after writing
cached pages later, such as during unmount time. (In general,
clean_bdev_aliases() related helpers should be invoked after
re-allocation to prevent the above corruption, but unfortunately we
missed it when zeroout the head of extra extent blocks in
ext4_ext_handle_unwritten_extents()).
This patch mark buffer as freed and set j_next_transaction to the new
transaction when it already belongs to the committing transaction in
jbd2_journal_forget(), so that commit code knows it should clear dirty
bits when it is done with the buffer.
This problem can be reproduced by xfstests generic/455 easily with
seeds (3246 3247 3248 3249).
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@vger.kernel.org
This issue was found when I tried to put checkpoint work in a separate thread,
the deadlock below happened:
Thread1 | Thread2
__jbd2_log_wait_for_space |
jbd2_log_do_checkpoint (hold j_checkpoint_mutex)|
if (jh->b_transaction != NULL) |
... |
jbd2_log_start_commit(journal, tid); |jbd2_update_log_tail
| will lock j_checkpoint_mutex,
| but will be blocked here.
|
jbd2_log_wait_commit(journal, tid); |
wait_event(journal->j_wait_done_commit, |
!tid_gt(tid, journal->j_commit_sequence)); |
... |wake_up(j_wait_done_commit)
} |
then deadlock occurs, Thread1 will never be waken up.
To fix this issue, drop j_checkpoint_mutex in jbd2_log_do_checkpoint()
when we are going to wait for transaction commit.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
There is a statement that is indented with spaces, replace it with
a tab.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We can hold j_state_lock for writing at the beginning of
jbd2_journal_commit_transaction() for a rather long time (reportedly for
30 ms) due cleaning revoke bits of all revoked buffers under it. The
handling of revoke tables as well as cleaning of t_reserved_list, and
checkpoint lists does not need j_state_lock for anything. It is only
needed to prevent new handles from joining the transaction. Generally
T_LOCKED transaction state prevents new handles from joining the
transaction - except for reserved handles which have to allowed to join
while we wait for other handles to complete.
To prevent reserved handles from joining the transaction while cleaning
up lists, add new transaction state T_SWITCH and watch for it when
starting reserved handles. With this we can just drop the lock for
operations that don't need it.
Reported-and-tested-by: Adrian Hunter <adrian.hunter@intel.com>
Suggested-by: "Theodore Y. Ts'o" <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The code cleaning transaction's lists of checkpoint buffers has a bug
where it increases bh refcount only after releasing
journal->j_list_lock. Thus the following race is possible:
CPU0 CPU1
jbd2_log_do_checkpoint()
jbd2_journal_try_to_free_buffers()
__journal_try_to_free_buffer(bh)
...
while (transaction->t_checkpoint_io_list)
...
if (buffer_locked(bh)) {
<-- IO completes now, buffer gets unlocked -->
spin_unlock(&journal->j_list_lock);
spin_lock(&journal->j_list_lock);
__jbd2_journal_remove_checkpoint(jh);
spin_unlock(&journal->j_list_lock);
try_to_free_buffers(page);
get_bh(bh) <-- accesses freed bh
Fix the problem by grabbing bh reference before unlocking
journal->j_list_lock.
Fixes: dc6e8d669c ("jbd2: don't call get_bh() before calling __jbd2_journal_remove_checkpoint()")
Fixes: be1158cc61 ("jbd2: fold __process_buffer() into jbd2_log_do_checkpoint()")
Reported-by: syzbot+7f4a27091759e2fe7453@syzkaller.appspotmail.com
CC: stable@vger.kernel.org
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
jbd2 is one of the few callers of current_kernel_time64(), which
is a wrapper around ktime_get_coarse_real_ts64(). This calls the
latter directly for consistency with the rest of the kernel that
is moving to the ktime_get_ family of time accessors.
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
maliciously crafted file system image can result in a kernel OOPS or
hang. At least one fix addresses an inline data bug could be
triggered by userspace without the need of a crafted file system
(although it does require that the inline data feature be enabled).
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAltBmcYACgkQ8vlZVpUN
gaPDJgf/cEa9QuiYTbNOmcOMorK9LEk5XO8qsiJdUVNQtLsHZfl0QowbkF9/F/W5
andTJzNpFvXeLADMTTjpsDnQ90i8LKD11Kol3dPJcMhJhELtQsjxUBguxpQBP86R
dvHuCl2/AaqX7rr6Co80yYSinRCquqkzJNhdM5/MLNGziSpkQL3dPSs93rmV+YbU
8DkUwmhDhoiToLBTLaldrAsAzKvor3uyjNPJ3qhxeE2kXrnuI1V4XfstBGjhVKFB
/5aYWexDZkL5qiCo+lZnqdITqUnPx3uAkUdBn0dj7V+nDow+/R/8nApvlvJu6usF
OfMoKr098/pmPAjE5aZ8QpBNVtLFpg==
=njzR
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 bugfixes from Ted Ts'o:
"Bug fixes for ext4; most of which relate to vulnerabilities where a
maliciously crafted file system image can result in a kernel OOPS or
hang.
At least one fix addresses an inline data bug could be triggered by
userspace without the need of a crafted file system (although it does
require that the inline data feature be enabled)"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: check superblock mapped prior to committing
ext4: add more mount time checks of the superblock
ext4: add more inode number paranoia checks
ext4: avoid running out of journal credits when appending to an inline file
jbd2: don't mark block as modified if the handle is out of credits
ext4: never move the system.data xattr out of the inode body
ext4: clear i_data in ext4_inode_info when removing inline data
ext4: include the illegal physical block in the bad map ext4_error msg
ext4: verify the depth of extent tree in ext4_find_extent()
ext4: only look at the bg_flags field if it is valid
ext4: make sure bitmaps and the inode table don't overlap with bg descriptors
ext4: always check block group bounds in ext4_init_block_bitmap()
ext4: always verify the magic number in xattr blocks
ext4: add corruption check in ext4_xattr_set_entry()
ext4: add warn_on_error mount option
Do not set the b_modified flag in block's journal head should not
until after we're sure that jbd2_journal_dirty_metadat() will not
abort with an error due to there not being enough space reserved in
the jbd2 handle.
Otherwise, future attempts to modify the buffer may lead a large
number of spurious errors and warnings.
This addresses CVE-2018-10883.
https://bugzilla.kernel.org/show_bug.cgi?id=200071
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
The kmem_cache_destroy() function already checks for null pointers, so
we can remove the check at the call site.
This patch also sets jbd2_handle_cache and jbd2_inode_cache to be NULL
after freeing them in jbd2_journal_destroy_handle_cache().
Signed-off-by: Wang Long <wanglong19@meituan.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
See following dmesg output with jbd2 debug enabled:
...(start_this_handle, 313): New handle 00000000c88d6ceb going live.
...(start_this_handle, 383): Handle 00000000c88d6ceb given 53 credits (total 53, free 32681)
...(do_get_write_access, 838): journal_head 0000000002856fc0, force_copy 0
...(jbd2_journal_cancel_revoke, 421): journal_head 0000000002856fc0, cancelling revoke
We have an extra line with every messages, this is a waste of buffer,
we can fix it by removing "\n" in the caller or remove it in
the __jbd2_debug(), i checked every jbd2_debug() passed '\n' explicitly.
To avoid more lines, let's remove it inside __jbd2_debug().
Signed-off-by: Wang Shilong <wshilong@ddn.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
If ext4 tries to start a reserved handle via
jbd2_journal_start_reserved(), and the journal has been aborted, this
can result in a NULL pointer dereference. This is because the fields
h_journal and h_transaction in the handle structure share the same
memory, via a union, so jbd2_journal_start_reserved() will clear
h_journal before calling start_this_handle(). If this function fails
due to an aborted handle, h_journal will still be NULL, and the call
to jbd2_journal_free_reserved() will pass a NULL journal to
sub_reserve_credits().
This can be reproduced by running "kvm-xfstests -c dioread_nolock
generic/475".
Cc: stable@kernel.org # 3.11
Fixes: 8f7d89f368 ("jbd2: transaction reservation support")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Jan Kara <jack@suse.cz>
This updates the jbd2 superblock unnecessarily, and on an abort we
shouldn't truncate the log.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Previously the jbd2 layer assumed that a file system check would be
required after a journal abort. In the case of the deliberate file
system shutdown, this should not be necessary. Allow the jbd2 layer
to distinguish between these two cases by using the ESHUTDOWN errno.
Also add proper locking to __journal_abort_soft().
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
There were two error messages emitted by jbd2, one for a bad checksum
for a jbd2 descriptor block, and one for a bad checksum for a jbd2
data block. Change the data block checksum error so that the two can
be disambiguated.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Sphinx emits various (26) warnings when building make target 'htmldocs'.
Currently struct definitions contain duplicate documentation, some as
kernel-docs and some as standard c89 comments. We can reduce
duplication while cleaning up the kernel docs.
Move all kernel-docs to right above each struct member. Use the set of
all existing comments (kernel-doc and c89). Add documentation for
missing struct members and function arguments.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
A number of ext4 source files were skipped due because their copyright
permission statements didn't match the expected text used by the
automated conversion utilities. I've added SPDX tags for the rest.
While looking at some of these files, I've noticed that we have quite
a bit of variation on the licenses that were used --- in particular
some of the Red Hat licenses on the jbd2 files use a GPL2+ license,
and we have some files that have a LGPL-2.1 license (which was quite
surprising).
I've not attempted to do any license changes. Even if it is perfectly
legal to relicense to GPL 2.0-only for consistency's sake, that should
be done with ext4 developer community discussion.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
* Introduce MAP_SYNC and MAP_SHARED_VALIDATE, a mechanism to enable
'userspace flush' of persistent memory updates via filesystem-dax
mappings. It arranges for any filesystem metadata updates that may be
required to satisfy a write fault to also be flushed ("on disk") before
the kernel returns to userspace from the fault handler. Effectively
every write-fault that dirties metadata completes an fsync() before
returning from the fault handler. The new MAP_SHARED_VALIDATE mapping
type guarantees that the MAP_SYNC flag is validated as supported by the
filesystem's ->mmap() file operation.
* Add support for the standard ACPI 6.2 label access methods that
replace the NVDIMM_FAMILY_INTEL (vendor specific) label methods. This
enables interoperability with environments that only implement the
standardized methods.
* Add support for the ACPI 6.2 NVDIMM media error injection methods.
* Add support for the NVDIMM_FAMILY_INTEL v1.6 DIMM commands for latch
last shutdown status, firmware update, SMART error injection, and
SMART alarm threshold control.
* Cleanup physical address information disclosures to be root-only.
* Fix revalidation of the DIMM "locked label area" status to support
dynamic unlock of the label area.
* Expand unit test infrastructure to mock the ACPI 6.2 Translate SPA
(system-physical-address) command and error injection commands.
Acknowledgements that came after the commits were pushed to -next:
957ac8c421 dax: fix PMD faults on zero-length files
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
a39e596baa xfs: support for synchronous DAX faults
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
7b565c9f96 xfs: Implement xfs_filemap_pfn_mkwrite() using __xfs_filemap_fault()
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
-----BEGIN PGP SIGNATURE-----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=h2vZ
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm and dax updates from Dan Williams:
"Save for a few late fixes, all of these commits have shipped in -next
releases since before the merge window opened, and 0day has given a
build success notification.
The ext4 touches came from Jan, and the xfs touches have Darrick's
reviewed-by. An xfstest for the MAP_SYNC feature has been through
a few round of reviews and is on track to be merged.
- Introduce MAP_SYNC and MAP_SHARED_VALIDATE, a mechanism to enable
'userspace flush' of persistent memory updates via filesystem-dax
mappings. It arranges for any filesystem metadata updates that may
be required to satisfy a write fault to also be flushed ("on disk")
before the kernel returns to userspace from the fault handler.
Effectively every write-fault that dirties metadata completes an
fsync() before returning from the fault handler. The new
MAP_SHARED_VALIDATE mapping type guarantees that the MAP_SYNC flag
is validated as supported by the filesystem's ->mmap() file
operation.
- Add support for the standard ACPI 6.2 label access methods that
replace the NVDIMM_FAMILY_INTEL (vendor specific) label methods.
This enables interoperability with environments that only implement
the standardized methods.
- Add support for the ACPI 6.2 NVDIMM media error injection methods.
- Add support for the NVDIMM_FAMILY_INTEL v1.6 DIMM commands for
latch last shutdown status, firmware update, SMART error injection,
and SMART alarm threshold control.
- Cleanup physical address information disclosures to be root-only.
- Fix revalidation of the DIMM "locked label area" status to support
dynamic unlock of the label area.
- Expand unit test infrastructure to mock the ACPI 6.2 Translate SPA
(system-physical-address) command and error injection commands.
Acknowledgements that came after the commits were pushed to -next:
- 957ac8c421 ("dax: fix PMD faults on zero-length files"):
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
- a39e596baa ("xfs: support for synchronous DAX faults") and
7b565c9f96 ("xfs: Implement xfs_filemap_pfn_mkwrite() using __xfs_filemap_fault()")
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>"
* tag 'libnvdimm-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (49 commits)
acpi, nfit: add 'Enable Latch System Shutdown Status' command support
dax: fix general protection fault in dax_alloc_inode
dax: fix PMD faults on zero-length files
dax: stop requiring a live device for dax_flush()
brd: remove dax support
dax: quiet bdev_dax_supported()
fs, dax: unify IOMAP_F_DIRTY read vs write handling policy in the dax core
tools/testing/nvdimm: unit test clear-error commands
acpi, nfit: validate commands against the device type
tools/testing/nvdimm: stricter bounds checking for error injection commands
xfs: support for synchronous DAX faults
xfs: Implement xfs_filemap_pfn_mkwrite() using __xfs_filemap_fault()
ext4: Support for synchronous DAX faults
ext4: Simplify error handling in ext4_dax_huge_fault()
dax: Implement dax_finish_sync_fault()
dax, iomap: Add support for synchronous faults
mm: Define MAP_SYNC and VM_SYNC flags
dax: Allow tuning whether dax_insert_mapping_entry() dirties entry
dax: Allow dax_iomap_fault() to return pfn
dax: Fix comment describing dax_iomap_fault()
...
We return IOMAP_F_DIRTY flag from ext4_iomap_begin() when asked to
prepare blocks for writing and the inode has some uncommitted metadata
changes. In the fault handler ext4_dax_fault() we then detect this case
(through VM_FAULT_NEEDDSYNC return value) and call helper
dax_finish_sync_fault() to flush metadata changes and insert page table
entry. Note that this will also dirty corresponding radix tree entry
which is what we want - fsync(2) will still provide data integrity
guarantees for applications not using userspace flushing. And
applications using userspace flushing can avoid calling fsync(2) and
thus avoid the performance overhead.
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.com>
Cc: linux-ext4@vger.kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>
-----BEGIN PGP SIGNATURE-----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=3Z93
-----END PGP SIGNATURE-----
Merge tag 'for-linus-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux
Pull Writeback error handling updates from Jeff Layton:
"This pile represents the bulk of the writeback error handling fixes
that I have for this cycle. Some of the earlier patches in this pile
may look trivial but they are prerequisites for later patches in the
series.
The aim of this set is to improve how we track and report writeback
errors to userland. Most applications that care about data integrity
will periodically call fsync/fdatasync/msync to ensure that their
writes have made it to the backing store.
For a very long time, we have tracked writeback errors using two flags
in the address_space: AS_EIO and AS_ENOSPC. Those flags are set when a
writeback error occurs (via mapping_set_error) and are cleared as a
side-effect of filemap_check_errors (as you noted yesterday). This
model really sucks for userland.
Only the first task to call fsync (or msync or fdatasync) will see the
error. Any subsequent task calling fsync on a file will get back 0
(unless another writeback error occurs in the interim). If I have
several tasks writing to a file and calling fsync to ensure that their
writes got stored, then I need to have them coordinate with one
another. That's difficult enough, but in a world of containerized
setups that coordination may even not be possible.
But wait...it gets worse!
The calls to filemap_check_errors can be buried pretty far down in the
call stack, and there are internal callers of filemap_write_and_wait
and the like that also end up clearing those errors. Many of those
callers ignore the error return from that function or return it to
userland at nonsensical times (e.g. truncate() or stat()). If I get
back -EIO on a truncate, there is no reason to think that it was
because some previous writeback failed, and a subsequent fsync() will
(incorrectly) return 0.
This pile aims to do three things:
1) ensure that when a writeback error occurs that that error will be
reported to userland on a subsequent fsync/fdatasync/msync call,
regardless of what internal callers are doing
2) report writeback errors on all file descriptions that were open at
the time that the error occurred. This is a user-visible change,
but I think most applications are written to assume this behavior
anyway. Those that aren't are unlikely to be hurt by it.
3) document what filesystems should do when there is a writeback
error. Today, there is very little consistency between them, and a
lot of cargo-cult copying. We need to make it very clear what
filesystems should do in this situation.
To achieve this, the set adds a new data type (errseq_t) and then
builds new writeback error tracking infrastructure around that. Once
all of that is in place, we change the filesystems to use the new
infrastructure for reporting wb errors to userland.
Note that this is just the initial foray into cleaning up this mess.
There is a lot of work remaining here:
1) convert the rest of the filesystems in a similar fashion. Once the
initial set is in, then I think most other fs' will be fairly
simple to convert. Hopefully most of those can in via individual
filesystem trees.
2) convert internal waiters on writeback to use errseq_t for
detecting errors instead of relying on the AS_* flags. I have some
draft patches for this for ext4, but they are not quite ready for
prime time yet.
This was a discussion topic this year at LSF/MM too. If you're
interested in the gory details, LWN has some good articles about this:
https://lwn.net/Articles/718734/https://lwn.net/Articles/724307/"
* tag 'for-linus-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
btrfs: minimal conversion to errseq_t writeback error reporting on fsync
xfs: minimal conversion to errseq_t writeback error reporting
ext4: use errseq_t based error handling for reporting data writeback errors
fs: convert __generic_file_fsync to use errseq_t based reporting
block: convert to errseq_t based writeback error tracking
dax: set errors in mapping when writeback fails
Documentation: flesh out the section in vfs.txt on storing and reporting writeback errors
mm: set both AS_EIO/AS_ENOSPC and errseq_t in mapping_set_error
fs: new infrastructure for writeback error handling and reporting
lib: add errseq_t type and infrastructure for handling it
mm: don't TestClearPageError in __filemap_fdatawait_range
mm: clear AS_EIO/AS_ENOSPC when writeback initiation fails
jbd2: don't clear and reset errors after waiting on writeback
buffer: set errors in mapping at the time that the error occurs
fs: check for writeback errors after syncing out buffers in generic_file_fsync
buffer: use mapping_set_error instead of setting the flag
mm: fix mapping_set_error call in me_pagecache_dirty
Resetting this flag is almost certainly racy, and will be problematic
with some coming changes.
Make filemap_fdatawait_keep_errors return int, but not clear the flag(s).
Have jbd2 call it instead of filemap_fdatawait and don't attempt to
re-set the error flag if it fails.
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
around. Highlights include:
- Conversion of a bunch of security documentation into RST
- The conversion of the remaining DocBook templates by The Amazing
Mauro Machine. We can now drop the entire DocBook build chain.
- The usual collection of fixes and minor updates.
-----BEGIN PGP SIGNATURE-----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=cVjZ
-----END PGP SIGNATURE-----
Merge tag 'docs-4.13' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"There has been a fair amount of activity in the docs tree this time
around. Highlights include:
- Conversion of a bunch of security documentation into RST
- The conversion of the remaining DocBook templates by The Amazing
Mauro Machine. We can now drop the entire DocBook build chain.
- The usual collection of fixes and minor updates"
* tag 'docs-4.13' of git://git.lwn.net/linux: (90 commits)
scripts/kernel-doc: handle DECLARE_HASHTABLE
Documentation: atomic_ops.txt is core-api/atomic_ops.rst
Docs: clean up some DocBook loose ends
Make the main documentation title less Geocities
Docs: Use kernel-figure in vidioc-g-selection.rst
Docs: fix table problems in ras.rst
Docs: Fix breakage with Sphinx 1.5 and upper
Docs: Include the Latex "ifthen" package
doc/kokr/howto: Only send regression fixes after -rc1
docs-rst: fix broken links to dynamic-debug-howto in kernel-parameters
doc: Document suitability of IBM Verse for kernel development
Doc: fix a markup error in coding-style.rst
docs: driver-api: i2c: remove some outdated information
Documentation: DMA API: fix a typo in a function name
Docs: Insert missing space to separate link from text
doc/ko_KR/memory-barriers: Update control-dependencies example
Documentation, kbuild: fix typo "minimun" -> "minimum"
docs: Fix some formatting issues in request-key.rst
doc: ReSTify keys-trusted-encrypted.txt
doc: ReSTify keys-request-key.txt
...
Rename 'struct wait_bit_queue::wait' to ::wq_entry, to more clearly
name it as a wait-queue entry.
Propagate it to a couple of usage sites where the wait-bit-queue internals
are exposed.
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When a transaction starts, start_this_handle() saves current
PF_MEMALLOC_NOFS value so that it can be restored at journal stop time.
Journal restart is a special case that calls start_this_handle() without
stopping the transaction. start_this_handle() isn't aware that the
original value is already stored so it overwrites it with current value.
For instance, a call sequence like below leaves PF_MEMALLOC_NOFS flag set
at the end:
jbd2_journal_start()
jbd2__journal_restart()
jbd2_journal_stop()
Make jbd2__journal_restart() restore the original value before calling
start_this_handle().
Fixes: 81378da64d ("jbd2: mark the transaction context with the scope GFP_NOFS context")
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Mauro says:
This patch series convert the remaining DocBooks to ReST.
The first version was originally
send as 3 patch series:
[PATCH 00/36] Convert DocBook documents to ReST
[PATCH 0/5] Convert more books to ReST
[PATCH 00/13] Get rid of DocBook
The lsm book was added as if it were a text file under
Documentation. The plan is to merge it with another file
under Documentation/security, after both this series and
a security Documentation patch series gets merged.
It also adjusts some Sphinx-pedantic errors/warnings on
some kernel-doc markups.
I also added some patches here to add PDF output for all
existing ReST books.
kernel-doc will try to interpret a foo() string, except if
properly escaped.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
kernel-doc script expects that a function documentation to
be just before the function, otherwise it will be ignored.
So, move the kernel-doc markup to the right place.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Pull RCU updates from Ingo Molnar:
"The main changes are:
- Debloat RCU headers
- Parallelize SRCU callback handling (plus overlapping patches)
- Improve the performance of Tree SRCU on a CPU-hotplug stress test
- Documentation updates
- Miscellaneous fixes"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (74 commits)
rcu: Open-code the rcu_cblist_n_lazy_cbs() function
rcu: Open-code the rcu_cblist_n_cbs() function
rcu: Open-code the rcu_cblist_empty() function
rcu: Separately compile large rcu_segcblist functions
srcu: Debloat the <linux/rcu_segcblist.h> header
srcu: Adjust default auto-expediting holdoff
srcu: Specify auto-expedite holdoff time
srcu: Expedite first synchronize_srcu() when idle
srcu: Expedited grace periods with reduced memory contention
srcu: Make rcutorture writer stalls print SRCU GP state
srcu: Exact tracking of srcu_data structures containing callbacks
srcu: Make SRCU be built by default
srcu: Fix Kconfig botch when SRCU not selected
rcu: Make non-preemptive schedule be Tasks RCU quiescent state
srcu: Expedite srcu_schedule_cbs_snp() callback invocation
srcu: Parallelize callback handling
kvm: Move srcu_struct fields to end of struct kvm
rcu: Fix typo in PER_RCU_NODE_PERIOD header comment
rcu: Use true/false in assignment to bool
rcu: Use bool value directly
...
file systems and for random write workloads into a preallocated file;
bug fixes and cleanups.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAlkPYB8ACgkQ8vlZVpUN
gaP1HwgApoMQGegtRIbCZKUzKBJ2S6vwIoPAMz62JuwngOyWygJ1T1TliKTitG04
XvijKpUHtEggMO/ZsUOCoyr2LzJlpVvvrJZsavEubO12LKreYMpvNraZF1GACYTb
lIZpdWkpcEz5WnPV/PXW/dEMcSMhnKe8tbmHXMyAouSC6a55F5Wp456KF/plqkHU
zkWTCDbEOtHThzpL8cthUL71ji62I3Op5jn/qOfKCm6/JtUlw5pYjWkRUNqqjSQE
uQqMpqLxI/VjOdEiBPxEF6A+ZudZmoBQKY15ibWCcHUPFOPqk4RdYz6VivRI7zrg
KrrKcdFT29MtKnRfAAoJcc0nJ4e1Iw==
=il74
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
- add GETFSMAP support
- some performance improvements for very large file systems and for
random write workloads into a preallocated file
- bug fixes and cleanups.
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
jbd2: cleanup write flags handling from jbd2_write_superblock()
ext4: mark superblock writes synchronous for nobarrier mounts
ext4: inherit encryption xattr before other xattrs
ext4: replace BUG_ON with WARN_ONCE in ext4_end_bio()
ext4: avoid unnecessary transaction stalls during writeback
ext4: preload block group descriptors
ext4: make ext4_shutdown() static
ext4: support GETFSMAP ioctls
vfs: add common GETFSMAP ioctl definitions
ext4: evict inline data when writing to memory map
ext4: remove ext4_xattr_check_entry()
ext4: rename ext4_xattr_check_names() to ext4_xattr_check_entries()
ext4: merge ext4_xattr_list() into ext4_listxattr()
ext4: constify static data that is never modified
ext4: trim return value and 'dir' argument from ext4_insert_dentry()
jbd2: fix dbench4 performance regression for 'nobarrier' mounts
jbd2: Fix lockdep splat with generic/270 test
mm: retry writepages() on ENOMEM when doing an data integrity writeback
Currently jbd2_write_superblock() silently adds REQ_SYNC to flags with
which journal superblock is written. Make this explicit by making flags
passed down to jbd2_write_superblock() contain REQ_SYNC.
CC: linux-ext4@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
kjournald2 is central to the transaction commit processing. As such any
potential allocation from this kernel thread has to be GFP_NOFS. Make
sure to mark the whole kernel thread GFP_NOFS by the memalloc_nofs_save.
[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/20170306131408.9828-8-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Chris Mason <clm@fb.com>
Cc: David Sterba <dsterba@suse.cz>
Cc: Brian Foster <bfoster@redhat.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Nikolay Borisov <nborisov@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
now that we have memalloc_nofs_{save,restore} api we can mark the whole
transaction context as implicitly GFP_NOFS. All allocations will
automatically inherit GFP_NOFS this way. This means that we do not have
to mark any of those requests with GFP_NOFS and moreover all the
ext4_kv[mz]alloc(GFP_NOFS) are also safe now because even the hardcoded
GFP_KERNEL allocations deep inside the vmalloc will be NOFS now.
[akpm@linux-foundation.org: tweak comments]
Link: http://lkml.kernel.org/r/20170306131408.9828-7-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Chris Mason <clm@fb.com>
Cc: David Sterba <dsterba@suse.cz>
Cc: Brian Foster <bfoster@redhat.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Nikolay Borisov <nborisov@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit b685d3d65a "block: treat REQ_FUA and REQ_PREFLUSH as
synchronous" removed REQ_SYNC flag from WRITE_FUA implementation. Since
JBD2 strips REQ_FUA and REQ_FLUSH flags from submitted IO when the
filesystem is mounted with nobarrier mount option, journal superblock
writes ended up being async writes after this patch and that caused
heavy performance regression for dbench4 benchmark with high number of
processes. In my test setup with HP RAID array with non-volatile write
cache and 32 GB ram, dbench4 runs with 8 processes regressed by ~25%.
Fix the problem by making sure journal superblock writes are always
treated as synchronous since they generally block progress of the
journalling machinery and thus the whole filesystem.
Fixes: b685d3d65a
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
I've hit a lockdep splat with generic/270 test complaining that:
3216.fsstress.b/3533 is trying to acquire lock:
(jbd2_handle){++++..}, at: [<ffffffff813152e0>] jbd2_log_wait_commit+0x0/0x150
but task is already holding lock:
(jbd2_handle){++++..}, at: [<ffffffff8130bd3b>] start_this_handle+0x35b/0x850
The underlying problem is that jbd2_journal_force_commit_nested()
(called from ext4_should_retry_alloc()) may get called while a
transaction handle is started. In such case it takes care to not wait
for commit of the running transaction (which would deadlock) but only
for a commit of a transaction that is already committing (which is safe
as that doesn't wait for any filesystem locks).
In fact there are also other callers of jbd2_log_wait_commit() that take
care to pass tid of a transaction that is already committing and for
those cases, the lockdep instrumentation is too restrictive and leading
to false positive reports. Fix the problem by calling
jbd2_might_wait_for_commit() from jbd2_log_wait_commit() only if the
transaction isn't already committing.
Fixes: 1eaa566d36
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
A group of Linux kernel hackers reported chasing a bug that resulted
from their assumption that SLAB_DESTROY_BY_RCU provided an existence
guarantee, that is, that no block from such a slab would be reallocated
during an RCU read-side critical section. Of course, that is not the
case. Instead, SLAB_DESTROY_BY_RCU only prevents freeing of an entire
slab of blocks.
However, there is a phrase for this, namely "type safety". This commit
therefore renames SLAB_DESTROY_BY_RCU to SLAB_TYPESAFE_BY_RCU in order
to avoid future instances of this sort of confusion.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: <linux-mm@kvack.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
[ paulmck: Add comments mentioning the old name, as requested by Eric
Dumazet, in order to help people familiar with the old name find
the new one. ]
Acked-by: David Rientjes <rientjes@google.com>
In journal_init_common(), if we failed to allocate the j_wbuf array, or
if we failed to create the buffer_head for the journal superblock, we
leaked the memory allocated for the revocation tables. Fix this.
Cc: stable@vger.kernel.org # 4.9
Fixes: f0c9fd5458
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
primarily used for testing, but which can be useful on production
systems when a scratch volume is being destroyed and the data on it
doesn't need to be saved. This found (and we fixed) a number of bugs
with ext4's recovery to corrupted file system --- the bugs increased
the amount of data that could be potentially lost, and in the case of
the inline data feature, could cause the kernel to BUG.
Also included are a number of other bug fixes, including in ext4's
fscrypt, DAX, inline data support.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAlirXesACgkQ8vlZVpUN
gaMOzQf8Ct6uPatV+m855oR4dAbZr2+lY4A4C+vHDzBtSMkPRyLX8cuo8XcwfTIm
vPVyDnL6EPyhXPxxfItu+92wAq1m5mVpKo57d0Ft5lw0rHxNtJTgVSRzsQ7VDRjj
5qMHW2K7Bk7EjzTeW3SF8/3+hqpzkAvRtNCntcomk5h08+cWMC8JSnn1kqw+naIn
EcbrC72GZb8JUELogVXC2vU58lp50SSBdr3l005jqKc5BvljMvdJ0Izn/3RVyU7u
q7vtynhe2ScFcHe/UzL1QgmQOy32tJpbS0NHalW47aw3Ynmn4cSX0YhhT9FDjRNQ
VOOfo1m1sAg166x0E+Nn7FeghTSSyA==
=cPIf
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"For this cycle we add support for the shutdown ioctl, which is
primarily used for testing, but which can be useful on production
systems when a scratch volume is being destroyed and the data on it
doesn't need to be saved.
This found (and we fixed) a number of bugs with ext4's recovery to
corrupted file system --- the bugs increased the amount of data that
could be potentially lost, and in the case of the inline data feature,
could cause the kernel to BUG.
Also included are a number of other bug fixes, including in ext4's
fscrypt, DAX, inline data support"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (26 commits)
ext4: rename EXT4_IOC_GOINGDOWN to EXT4_IOC_SHUTDOWN
ext4: fix fencepost in s_first_meta_bg validation
ext4: don't BUG when truncating encrypted inodes on the orphan list
ext4: do not use stripe_width if it is not set
ext4: fix stripe-unaligned allocations
dax: assert that i_rwsem is held exclusive for writes
ext4: fix DAX write locking
ext4: add EXT4_IOC_GOINGDOWN ioctl
ext4: add shutdown bit and check for it
ext4: rename s_resize_flags to s_ext4_flags
ext4: return EROFS if device is r/o and journal replay is needed
ext4: preserve the needs_recovery flag when the journal is aborted
jbd2: don't leak modified metadata buffers on an aborted journal
ext4: fix inline data error paths
ext4: move halfmd4 into hash.c directly
ext4: fix use-after-iput when fscrypt contexts are inconsistent
jbd2: fix use after free in kjournald2()
ext4: fix data corruption in data=journal mode
ext4: trim allocation requests to group size
ext4: replace BUG_ON with WARN_ON in mb_find_extent()
...
If the journal has been aborted, we shouldn't mark the underlying
buffer head as dirty, since that will cause the metadata block to get
modified. And if the journal has been aborted, we shouldn't allow
this since it will almost certainly lead to a corrupted file system.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Below is the synchronization issue between unmount and kjournald2
contexts, which results into use after free issue in kjournald2().
Fix this issue by using journal->j_state_lock to synchronize the
wait_event() done in journal_kill_thread() and the wake_up() done
in kjournald2().
TASK 1:
umount cmd:
|--jbd2_journal_destroy() {
|--journal_kill_thread() {
write_lock(&journal->j_state_lock);
journal->j_flags |= JBD2_UNMOUNT;
...
write_unlock(&journal->j_state_lock);
wake_up(&journal->j_wait_commit); TASK 2 wakes up here:
kjournald2() {
...
checks JBD2_UNMOUNT flag and calls goto end-loop;
...
end_loop:
write_unlock(&journal->j_state_lock);
journal->j_task = NULL; --> If this thread gets
pre-empted here, then TASK 1 wait_event will
exit even before this thread is completely
done.
wait_event(journal->j_wait_done_commit, journal->j_task == NULL);
...
write_lock(&journal->j_state_lock);
write_unlock(&journal->j_state_lock);
}
|--kfree(journal);
}
}
wake_up(&journal->j_wait_done_commit); --> this step
now results into use after free issue.
}
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When an ext4 fs is bogged down by a lot of metadata IOs (in the
reported case, it was deletion of millions of files, but any massive
amount of journal writes would do), after the journal is filled up,
tasks which try to access the filesystem and aren't currently
performing the journal writes end up waiting in
__jbd2_log_wait_for_space() for journal->j_checkpoint_mutex.
Because those mutex sleeps aren't marked as iowait, this condition can
lead to misleadingly low iowait and /proc/stat:procs_blocked. While
iowait propagation is far from strict, this condition can be triggered
fairly easily and annotating these sleeps correctly helps initial
diagnosis quite a bit.
Use the new mutex_lock_io() for journal->j_checkpoint_mutex so that
these sleeps are properly marked as iowait.
Reported-by: Mingbo Wan <mingbo@fb.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jan Kara <jack@suse.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kernel-team@fb.com
Link: http://lkml.kernel.org/r/1477673892-28940-5-git-send-email-tj@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This was entirely automated, using the script by Al:
PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
$(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)
to do the replacement at the end of the merge window.
Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull block layer updates from Jens Axboe:
"This is the main block pull request this series. Contrary to previous
release, I've kept the core and driver changes in the same branch. We
always ended up having dependencies between the two for obvious
reasons, so makes more sense to keep them together. That said, I'll
probably try and keep more topical branches going forward, especially
for cycles that end up being as busy as this one.
The major parts of this pull request is:
- Improved support for O_DIRECT on block devices, with a small
private implementation instead of using the pig that is
fs/direct-io.c. From Christoph.
- Request completion tracking in a scalable fashion. This is utilized
by two components in this pull, the new hybrid polling and the
writeback queue throttling code.
- Improved support for polling with O_DIRECT, adding a hybrid mode
that combines pure polling with an initial sleep. From me.
- Support for automatic throttling of writeback queues on the block
side. This uses feedback from the device completion latencies to
scale the queue on the block side up or down. From me.
- Support from SMR drives in the block layer and for SD. From Hannes
and Shaun.
- Multi-connection support for nbd. From Josef.
- Cleanup of request and bio flags, so we have a clear split between
which are bio (or rq) private, and which ones are shared. From
Christoph.
- A set of patches from Bart, that improve how we handle queue
stopping and starting in blk-mq.
- Support for WRITE_ZEROES from Chaitanya.
- Lightnvm updates from Javier/Matias.
- Supoort for FC for the nvme-over-fabrics code. From James Smart.
- A bunch of fixes from a whole slew of people, too many to name
here"
* 'for-4.10/block' of git://git.kernel.dk/linux-block: (182 commits)
blk-stat: fix a few cases of missing batch flushing
blk-flush: run the queue when inserting blk-mq flush
elevator: make the rqhash helpers exported
blk-mq: abstract out blk_mq_dispatch_rq_list() helper
blk-mq: add blk_mq_start_stopped_hw_queue()
block: improve handling of the magic discard payload
blk-wbt: don't throttle discard or write zeroes
nbd: use dev_err_ratelimited in io path
nbd: reset the setup task for NBD_CLEAR_SOCK
nvme-fabrics: Add FC LLDD loopback driver to test FC-NVME
nvme-fabrics: Add target support for FC transport
nvme-fabrics: Add host support for FC transport
nvme-fabrics: Add FC transport LLDD api definitions
nvme-fabrics: Add FC transport FC-NVME definitions
nvme-fabrics: Add FC transport error codes to nvme.h
Add type 0x28 NVME type code to scsi fc headers
nvme-fabrics: patch target code in prep for FC transport support
nvme-fabrics: set sqe.command_id in core not transports
parser: add u64 number parser
nvme-rdma: align to generic ib_event logging helper
...
Remove the WRITE_* and READ_SYNC wrappers, and just use the flags
directly. Where applicable this also drops usage of the
bio_set_op_attrs wrapper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
When 'jh->b_transaction == transaction' (asserted by below)
J_ASSERT_JH(jh, (jh->b_transaction == transaction || ...
'journal->j_list_lock' will be incorrectly unlocked, since
the the lock is aquired only at the end of if / else-if
statements (missing the else case).
Signed-off-by: Taesoo Kim <tsgatesv@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Fixes: 6e4862a5bb
Cc: stable@vger.kernel.org # 3.14+
The mapping_set_error() helper sets the correct AS_ flag for the mapping
so there is no reason to open code it. Use the helper directly.
[akpm@linux-foundation.org: be honest about conversion from -ENXIO to -EIO]
Link: http://lkml.kernel.org/r/20160912111608.2588-2-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Thomas has reported a lockdep splat hitting in
add_transaction_credits(). The problem is that that function calls
jbd2_might_wait_for_commit() while holding j_state_lock which is wrong
(we do not really wait for transaction commit while holding that lock).
Fix the problem by moving jbd2_might_wait_for_commit() into places where
we are ready to wait for transaction commit and thus j_state_lock is
unlocked.
Cc: stable@vger.kernel.org
Fixes: 1eaa566d36
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
There are some repetitive code in jbd2_journal_init_dev() and
jbd2_journal_init_inode(). So this patch moves the common code into
journal_init_common() helper to simplify the code. And fix the coding
style warnings reported by checkpatch.pl by the way.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
encryption code and switching things over to using the copies in
fs/crypto. I've updated the MAINTAINERS file to add an entry for
fs/crypto listing Jaeguk Kim and myself as the maintainers.
There are also a number of bug fixes, most notably for some problems
found by American Fuzzy Lop (AFL) courtesy of Vegard Nossum. Also
fixed is a writeback deadlock detected by generic/130, and some
potential races in the metadata checksum code.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJXlbP9AAoJEPL5WVaVDYGjGxgIAJ9YIqme//yix63oHYLhDNea
lY/TLqZrb9/TdDRvGyZa3jYaKaIejL53eEQS9nhEB/JI0sEiDpHmOrDOxdj8Hlsw
fm7nJyh1u4vFKPyklCbIvLAje1vl8X/6OvqQiwh45gIxbbsFftaBWtccW+UtEkIP
Fx65Vk7RehJ/sNrM0cRrwB79YAmDS8P6BPyzdMRk+vO/uFqyq7Auc+pkd+bTlw/m
TDAEIunlk0Ovjx75ru1zaemL1JJx5ffehrJmGCcSUPHVbMObOEKIrlV50gAAKVhO
qbZAri3mhDvyspSLuS/73L9skeCiWFLhvojCBGu4t2aa3JJolmItO7IpKi4HdRU=
=bxGK
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"The major change this cycle is deleting ext4's copy of the file system
encryption code and switching things over to using the copies in
fs/crypto. I've updated the MAINTAINERS file to add an entry for
fs/crypto listing Jaeguk Kim and myself as the maintainers.
There are also a number of bug fixes, most notably for some problems
found by American Fuzzy Lop (AFL) courtesy of Vegard Nossum. Also
fixed is a writeback deadlock detected by generic/130, and some
potential races in the metadata checksum code"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (21 commits)
ext4: verify extent header depth
ext4: short-cut orphan cleanup on error
ext4: fix reference counting bug on block allocation error
MAINTAINRES: fs-crypto maintainers update
ext4 crypto: migrate into vfs's crypto engine
ext2: fix filesystem deadlock while reading corrupted xattr block
ext4: fix project quota accounting without quota limits enabled
ext4: validate s_reserved_gdt_blocks on mount
ext4: remove unused page_idx
ext4: don't call ext4_should_journal_data() on the journal inode
ext4: Fix WARN_ON_ONCE in ext4_commit_super()
ext4: fix deadlock during page writeback
ext4: correct error value of function verifying dx checksum
ext4: avoid modifying checksum fields directly during checksum verification
ext4: check for extents that wrap around
jbd2: make journal y2038 safe
jbd2: track more dependencies on transaction commit
jbd2: move lockdep tracking to journal_s
jbd2: move lockdep instrumentation for jbd2 handles
ext4: respect the nobarrier mount option in nojournal mode
...
Carlos Maiolino
zhangyi (F)
Vasily Averin
Shijie Luo
wangyan
Kai Li
Linus Torvalds
Theodore Ts'o
Jan Kara
Thomas Gleixner
Qian Cai
Joseph Qi
Xiaoguang Wang
Chandan Rajendra
Ross Zwisler
Liu Song
Gaowei Pu
Chengguang Xu
Jiufei Xue
Liu Song
luojiajun
Colin Ian King
Arnd Bergmann
Kees Cook
Wang Long
Wang Shilong
Tobin C. Harding
Jeff Layton
Ingo Molnar
Tahsin Erdogan
Jonathan Corbet
Mauro Carvalho Chehab
Michal Hocko
Paul E. McKenney
Eric Biggers
Sahitya Tummala
Tejun Heo
Christoph Hellwig
Taesoo Kim
Geliang Tang