Граф коммитов

19 Коммитов

Автор SHA1 Сообщение Дата
Stephen Rothwell 3fd5939798 [PATCH] Create compat_sys_migrate_pages
This is needed on bigendian 64bit architectures.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-03 12:27:59 -08:00
Randy Dunlap 39af114377 [PATCH] fix epoll_pwait when EPOLL=n
Fixes http://bugzilla.kernel.org/show_bug.cgi?id=7371

sys_epoll_pwait needs to be listed as a conditional (weak)
entry point for CONFIG_EPOLL=n.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-16 09:14:05 -07:00
David Howells 9361401eb7 [PATCH] BLOCK: Make it possible to disable the block layer [try #6]
Make it possible to disable the block layer.  Not all embedded devices require
it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require
the block layer to be present.

This patch does the following:

 (*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev
     support.

 (*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls
     an item that uses the block layer.  This includes:

     (*) Block I/O tracing.

     (*) Disk partition code.

     (*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS.

     (*) The SCSI layer.  As far as I can tell, even SCSI chardevs use the
     	 block layer to do scheduling.  Some drivers that use SCSI facilities -
     	 such as USB storage - end up disabled indirectly from this.

     (*) Various block-based device drivers, such as IDE and the old CDROM
     	 drivers.

     (*) MTD blockdev handling and FTL.

     (*) JFFS - which uses set_bdev_super(), something it could avoid doing by
     	 taking a leaf out of JFFS2's book.

 (*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and
     linux/elevator.h contingent on CONFIG_BLOCK being set.  sector_div() is,
     however, still used in places, and so is still available.

 (*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and
     parts of linux/fs.h.

 (*) Makes a number of files in fs/ contingent on CONFIG_BLOCK.

 (*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK.

 (*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK
     is not enabled.

 (*) fs/no-block.c is created to hold out-of-line stubs and things that are
     required when CONFIG_BLOCK is not set:

     (*) Default blockdev file operations (to give error ENODEV on opening).

 (*) Makes some /proc changes:

     (*) /proc/devices does not list any blockdevs.

     (*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK.

 (*) Makes some compat ioctl handling contingent on CONFIG_BLOCK.

 (*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if
     given command other than Q_SYNC or if a special device is specified.

 (*) In init/do_mounts.c, no reference is made to the blockdev routines if
     CONFIG_BLOCK is not defined.  This does not prohibit NFS roots or JFFS2.

 (*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return
     error ENOSYS by way of cond_syscall if so).

 (*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if
     CONFIG_BLOCK is not set, since they can't then happen.

Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-09-30 20:52:31 +02:00
Christoph Lameter 1b2db9fb7a [PATCH] sys_move_pages: 32bit support (i386, x86_64)
sys_move_pages() support for 32bit (i386 plus x86_64 compat layer)

Add support for move_pages() on i386 and also add the compat functions
necessary to run 32 bit binaries on x86_64.

Add compat_sys_move_pages to the x86_64 32bit binary layer.  Note that it is
not up to date so I added the missing pieces.  Not sure if this is done the
right way.

[akpm@osdl.org: compile fix]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:42:53 -07:00
Christoph Lameter 742755a1d8 [PATCH] page migration: sys_move_pages(): support moving of individual pages
move_pages() is used to move individual pages of a process. The function can
be used to determine the location of pages and to move them onto the desired
node. move_pages() returns status information for each page.

long move_pages(pid, number_of_pages_to_move,
		addresses_of_pages[],
		nodes[] or NULL,
		status[],
		flags);

The addresses of pages is an array of void * pointing to the
pages to be moved.

The nodes array contains the node numbers that the pages should be moved
to. If a NULL is passed instead of an array then no pages are moved but
the status array is updated. The status request may be used to determine
the page state before issuing another move_pages() to move pages.

The status array will contain the state of all individual page migration
attempts when the function terminates. The status array is only valid if
move_pages() completed successfullly.

Possible page states in status[]:

0..MAX_NUMNODES	The page is now on the indicated node.

-ENOENT		Page is not present

-EACCES		Page is mapped by multiple processes and can only
		be moved if MPOL_MF_MOVE_ALL is specified.

-EPERM		The page has been mlocked by a process/driver and
		cannot be moved.

-EBUSY		Page is busy and cannot be moved. Try again later.

-EFAULT		Invalid address (no VMA or zero page).

-ENOMEM		Unable to allocate memory on target node.

-EIO		Unable to write back page. The page must be written
		back in order to move it since the page is dirty and the
		filesystem does not provide a migration function that
		would allow the moving of dirty pages.

-EINVAL		A dirty page cannot be moved. The filesystem does not provide
		a migration function and has no ability to write back pages.

The flags parameter indicates what types of pages to move:

MPOL_MF_MOVE	Move pages that are only mapped by the process.

MPOL_MF_MOVE_ALL Also move pages that are mapped by multiple processes.
		Requires sufficient capabilities.

Possible return codes from move_pages()

-ENOENT		No pages found that would require moving. All pages
		are either already on the target node, not present, had an
		invalid address or could not be moved because they were
		mapped by multiple processes.

-EINVAL		Flags other than MPOL_MF_MOVE(_ALL) specified or an attempt
		to migrate pages in a kernel thread.

-EPERM		MPOL_MF_MOVE_ALL specified without sufficient priviledges.
		or an attempt to move a process belonging to another user.

-EACCES		One of the target nodes is not allowed by the current cpuset.

-ENODEV		One of the target nodes is not online.

-ESRCH		Process does not exist.

-E2BIG		Too many pages to move.

-ENOMEM		Not enough memory to allocate control array.

-EFAULT		Parameters could not be accessed.

A test program for move_pages() may be found with the patches
on ftp.kernel.org:/pub/linux/kernel/people/christoph/pmig/patches-2.6.17-rc4-mm3

From: Christoph Lameter <clameter@sgi.com>

  Detailed results for sys_move_pages()

  Pass a pointer to an integer to get_new_page() that may be used to
  indicate where the completion status of a migration operation should be
  placed.  This allows sys_move_pags() to report back exactly what happened to
  each page.

  Wish there would be a better way to do this. Looks a bit hacky.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Jes Sorensen <jes@trained-monkey.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Andi Kleen <ak@muc.de>
Cc: Michael Kerrisk <mtk-manpages@gmx.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:42:53 -07:00
Hyok S. Choi 3016b42153 [PATCH] frv: define MMU mode specific syscalls as 'cond_syscall' and clean up unneeded macros
For some architectures, a few syscalls are not linked in noMMU mode.  In
that case, the MMU depending syscalls are needed to be defined as
'cond_syscall'.  For example, ARM architecture selectively links sys_mlock
by the mode configuration.

In case of FRV, it has been managed by #ifdef CONFIG_MMU macro in
arch/frv/kernel/entry.S.  However these conditional macros are just
duplicates if they were defined as cond_syscall.  Compilation test is done
with FRV toolchains for both of MMU and noMMU mode.

Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11 06:18:33 -07:00
Ingo Molnar 0771dfefc9 [PATCH] lightweight robust futexes: core
Add the core infrastructure for robust futexes: structure definitions, the new
syscalls and the do_exit() based cleanup mechanism.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Acked-by: Ulrich Drepper <drepper@redhat.com>
Cc: Michael Kerrisk <mtk-manpages@gmx.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-27 08:44:49 -08:00
Stephen Rothwell 7fd105e758 [PATCH] Fix compile for CONFIG_SYSVIPC=n or CONFIG_SYSCTL=n
The compat syscalls are added to sys_ni.c since they are not defined if the
above CONFIG options are off.  Also, nfs would not build with CONFIG_SYSCTL
off.

Noticed by Arthur Othieno.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-20 20:00:11 -08:00
Linus Torvalds 6150c32589 Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc-merge 2006-01-09 10:03:44 -08:00
Matt Mackall 64ca9004b8 [PATCH] Make vm86 support optional
This adds an option to remove vm86 support under CONFIG_EMBEDDED.  Saves
about 5k.

This version eliminates most of the #ifdefs of the previous version and
instead uses function stubs in vm86.h.  Also, release_vm86_irqs is moved
from asm-i386/irq.h to a more appropriate home in vm86.h so that the stubs
can live together.

$ size vmlinux-baseline vmlinux-novm86
   text    data     bss     dec     hex filename
2920821  523232  190652 3634705  377611 vmlinux-baseline
2916268  523100  190492 3629860  376324 vmlinux-novm86

Signed-off-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 20:14:11 -08:00
Matt Mackall e585e47031 [PATCH] tiny: Make *[ug]id16 support optional
Configurable 16-bit UID and friends support

This allows turning off the legacy 16 bit UID interfaces on embedded platforms.

   text    data     bss     dec     hex filename
3330172  529036  190556 4049764  3dcb64 vmlinux-baseline
3328268  529040  190556 4047864  3dc3f8 vmlinux

From: Adrian Bunk <bunk@stusta.de>

    UID16 was accidentially disabled for !EMBEDDED.

Signed-off-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 20:14:11 -08:00
Christoph Lameter 39743889aa [PATCH] Swap Migration V5: sys_migrate_pages interface
sys_migrate_pages implementation using swap based page migration

This is the original API proposed by Ray Bryant in his posts during the first
half of 2005 on linux-mm@kvack.org and linux-kernel@vger.kernel.org.

The intent of sys_migrate is to migrate memory of a process.  A process may
have migrated to another node.  Memory was allocated optimally for the prior
context.  sys_migrate_pages allows to shift the memory to the new node.

sys_migrate_pages is also useful if the processes available memory nodes have
changed through cpuset operations to manually move the processes memory.  Paul
Jackson is working on an automated mechanism that will allow an automatic
migration if the cpuset of a process is changed.  However, a user may decide
to manually control the migration.

This implementation is put into the policy layer since it uses concepts and
functions that are also needed for mbind and friends.  The patch also provides
a do_migrate_pages function that may be useful for cpusets to automatically
move memory.  sys_migrate_pages does not modify policies in contrast to Ray's
implementation.

The current code here is based on the swap based page migration capability and
thus is not able to preserve the physical layout relative to it containing
nodeset (which may be a cpuset).  When direct page migration becomes available
then the implementation needs to be changed to do a isomorphic move of pages
between different nodesets.  The current implementation simply evicts all
pages in source nodeset that are not in the target nodeset.

Patch supports ia64, i386 and x86_64.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 20:12:42 -08:00
Arnd Bergmann 67207b9664 [PATCH] spufs: The SPU file system, base
This is the current version of the spu file system, used
for driving SPEs on the Cell Broadband Engine.

This release is almost identical to the version for the
2.6.14 kernel posted earlier, which is available as part
of the Cell BE Linux distribution from
http://www.bsc.es/projects/deepcomputing/linuxoncell/.

The first patch provides all the interfaces for running
spu application, but does not have any support for
debugging SPU tasks or for scheduling. Both these
functionalities are added in the subsequent patches.

See Documentation/filesystems/spufs.txt on how to use
spufs.

Signed-off-by: Arnd Bergmann <arndb@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 14:49:12 +11:00
Ingo Molnar 6cb54819d7 [PATCH] remove sys_set_zone_reclaim()
This removes sys_set_zone_reclaim() for now.  While i'm sure Martin is
trying to solve a real problem, we must not hard-code an incomplete and
insufficient approach into a syscall, because syscalls are pretty much
for eternity.  I am quite strongly convinced that this syscall must not
hit v2.6.13 in its current form.

Firstly, the syscall lacks basic syscall design: e.g. it allows the
global setting of VM policy for unprivileged users. (!) [ Imagine an
Oracle installation and a SAP installation on the same NUMA box fighting
over the 'optimal' setting for this flag. What will they do? Will they
try to set the flag to their own preferred value every second or so? ]

Secondly, it was added based on a single datapoint from Martin:

 http://marc.theaimsgroup.com/?l=linux-mm&m=111763597218177&w=2

where Martin characterizes the numbers the following way:

 ' Run-to-run variability for "make -j" is huge, so these numbers aren't
   terribly useful except to see that with reclaim the benchmark still
   finishes in a reasonable amount of time. '

in other words: the fundamental problem has likely not been solved, only
a tendential move into the right direction has been observed, and a
handful of numbers were picked out of a set of hugely variable results,
without showing the variability data. How much variance is there
run-to-run?

I'd really suggest to first walk the walk and see what's needed to get
stable & predictable kernel compilation numbers on that NUMA box, before
adding random syscalls to tune a particular aspect of the VM ... which
approach might not even matter once the whole picture has been analyzed
and understood!

The third, most important point is that the syscall exposes VM tuning
internals in a completely unstructured way. What sense does it make to
have a _GLOBAL_ per-node setting for 'should we go to another node for
reclaim'? If then it might make sense to do this per-app, via numalib or
so.

The change is minimalistic in that it doesnt remove the syscall and the
underlying infrastructure changes, only the user-visible changes.  We
could perhaps add a CAP_SYS_ADMIN-only sysctl for this hack, a'ka
/proc/sys/vm/swappiness, but even that looks quite counterproductive
when the generic approach is that we are trying to reduce the number of
external factors in the VM balance picture.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-01 10:03:56 -07:00
Robert Love 0eeca28300 [PATCH] inotify
inotify is intended to correct the deficiencies of dnotify, particularly
its inability to scale and its terrible user interface:

        * dnotify requires the opening of one fd per each directory
          that you intend to watch. This quickly results in too many
          open files and pins removable media, preventing unmount.
        * dnotify is directory-based. You only learn about changes to
          directories. Sure, a change to a file in a directory affects
          the directory, but you are then forced to keep a cache of
          stat structures.
        * dnotify's interface to user-space is awful.  Signals?

inotify provides a more usable, simple, powerful solution to file change
notification:

        * inotify's interface is a system call that returns a fd, not SIGIO.
	  You get a single fd, which is select()-able.
        * inotify has an event that says "the filesystem that the item
          you were watching is on was unmounted."
        * inotify can watch directories or files.

Inotify is currently used by Beagle (a desktop search infrastructure),
Gamin (a FAM replacement), and other projects.

See Documentation/filesystems/inotify.txt.

Signed-off-by: Robert Love <rml@novell.com>
Cc: John McCutchan <ttb@tentacle.dhs.org>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-12 20:38:38 -07:00
Eric W. Biederman dc009d9243 [PATCH] kexec: add kexec syscalls
This patch introduces the architecture independent implementation the
sys_kexec_load, the compat_sys_kexec_load system calls.

Kexec on panic support has been integrated into the core patch and is
relatively clean.

In addition the hopefully architecture independent option
crashkernel=size@location has been docuemented.  It's purpose is to reserve
space for the panic kernel to live, and where no DMA transfer will ever be
setup to access.

Signed-off-by: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Alexander Nyberg <alexn@telia.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:48 -07:00
Martin Hicks 753ee72896 [PATCH] VM: early zone reclaim
This is the core of the (much simplified) early reclaim.  The goal of this
patch is to reclaim some easily-freed pages from a zone before falling back
onto another zone.

One of the major uses of this is NUMA machines.  With the default allocator
behavior the allocator would look for memory in another zone, which might be
off-node, before trying to reclaim from the current zone.

This adds a zone tuneable to enable early zone reclaim.  It is selected on a
per-zone basis and is turned on/off via syscall.

Adding some extra throttling on the reclaim was also required (patch
4/4).  Without the machine would grind to a crawl when doing a "make -j"
kernel build.  Even with this patch the System Time is higher on
average, but it seems tolerable.  Here are some numbers for kernbench
runs on a 2-node, 4cpu, 8Gig RAM Altix in the "make -j" run:

			wall  user   sys   %cpu  ctx sw.  sleeps
			----  ----   ---   ----   ------  ------
No patch		1009  1384   847   258   298170   504402
w/patch, no reclaim     880   1376   667   288   254064   396745
w/patch & reclaim       1079  1385   926   252   291625   548873

These numbers are the average of 2 runs of 3 "make -j" runs done right
after system boot.  Run-to-run variability for "make -j" is huge, so
these numbers aren't terribly useful except to seee that with reclaim
the benchmark still finishes in a reasonable amount of time.

I also looked at the NUMA hit/miss stats for the "make -j" runs and the
reclaim doesn't make any difference when the machine is thrashing away.

Doing a "make -j8" on a single node that is filled with page cache pages
takes 700 seconds with reclaim turned on and 735 seconds without reclaim
(due to remote memory accesses).

The simple zone_reclaim syscall program is at
http://www.bork.org/~mort/sgi/zone_reclaim.c

Signed-off-by: Martin Hicks <mort@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 18:46:14 -07:00
Stephen Rothwell 7d87e14c23 [PATCH] consolidate sys_shmat
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:59:12 -07:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00