Граф коммитов

152 Коммитов

Автор SHA1 Сообщение Дата
Eric W. Biederman 467622ef2a [MTD] [NOR] Fix cfi_send_gen_cmd handling of x16 devices in x8 mode (v4)
For "unlock" cycles to 16bit devices in 8bit compatibility mode we need
to use the byte addresses 0xaaa and 0x555. These effectively match
the word address 0x555 and 0x2aa, except the latter has its low bit set.

Most chips don't care about the value of the 'A-1' pin in x8 mode,
but some -- like the ST M29W320D -- do. So we need to be careful to
set it where appropriate.

cfi_send_gen_cmd is only ever passed addresses where the low byte
is 0x00, 0x55 or 0xaa. Of those, only addresses ending 0xaa are
affected by this patch, by masking in the extra low bit when the device
is known to be in compatibility mode.

[dwmw2: Do it only when (cmd_ofs & 0xff) == 0xaa]
v4: Fix  stupid typo in cfi_build_cmd_addr that failed to compile
    I'm writing this patch way to late at night.
v3: Bring all of the work back into cfi_build_cmd_addr
    including calling of map_bankwidth(map) and cfi_interleave(cfi)
    So every caller doesn't need to.
v2: Only modified the address if we our device_type is larger than our
    bus width.

Cc: stable@kernel.org
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-11-05 14:40:25 +01:00
Haavard Skinnemoen be8f78b8e8 [MTD] [NOR] AT49BV6416 has swapped erase regions
The CFI information read from AT49BV6416 lists the erase regions in the
wrong order, causing problems when trying to erase or update the first
or last 64KiB block.

Work around this by inverting the "top boot" flag, which will
effectively reverse the order of the erase regions.

This chip is obsolete, but it's used in some existing designs.

Signed-off-by: Håvard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-10-18 12:53:15 +01:00
Christopher Moore 87e92c062b [MTD] cfi_cmdset_0002.c: Add Macronix CFI V1.0 TopBottom detection
This patch adds TopBottom detection for most Macronix chips with CFI V1.0.

The main purpose of this patch is to add detection of the MX29LV400C B
used on the LaCie Ethernet Disk mini V2 NAS.

It detects the following parts correctly:-
MX28F640C3B T
MX29LV002C  B
MX29LV002NC B
MX29LV004C  T
MX29LV400C  T/B
MX29LV800C  T/B
MX29LV160C  T/B
MX29SL800C  T/B
MX29SL802C  T/B

It detects the following uniform part as bottom but it should work
correctly:-
MX29LV040C

For T parts it causes the erase block table to be reversed correctly.
For other parts it avoids the bogus "Assuming top" message.

It does not detect the following correctly:-
MX28F640C3B B
MX29LV002C  T
MX29LV002NC T
MX29LV004C  B
MX29SL400C  T/B
MX29SL402C  T/B

If desired I could supply a more complicated patch to handle these as
well.

Only the MX29LV400C B has been physically tested; others were checked
against their data sheets.

Signed-off-by: Christopher Moore <moore@free.fr>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-10-18 12:41:51 +01:00
Alexander Belyakov 3afe7eb37f [MTD] [NOR] fix cfi_cmdset_0001 FL_SYNCING race (take 2)
The patch fixes CFI issue with multipartitional devices leading to the 
set of errors or even deadlock. The problem is CFI FL_SYNCING state race 
with flash operations (e.g. erase suspend). It is reproduced by running 
intensive writes on one JFFS2 partition and simultaneously performing 
mount/unmount cycle on another partition of the same chip.

Signed-off-by: Alexander Belyakov <abelyako@googlemail.com>
Acked-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-09-26 18:56:18 -06:00
David Woodhouse 5e706469a0 [MTD] [NOR] Select MTD_CFI_UTIL when MTD_CFI probe routine is enabled
It requires cfi_qry_mode_on(), which is in cfi_util.c

Reported by Russell King

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-09-01 12:23:22 +01:00
David Woodhouse c314dfdc35 [MTD] [NOR] Rename and export new cfi_qry_*() functions
They need to be exported, so let's give them less generic-sounding names
while we're at it.

Original export patch, along with the suggestion about the nomenclature,
from Stephen Rothwell.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-08-07 11:55:07 +01:00
Anders Grafström e93cafe45f [MTD] [NOR] cfi_cmdset_0001: Timeouts for erase, write and unlock operations
Timeouts are currently given by the typical operation time times 8.
It works in the general well-behaved case but not when an erase block is
failing. For erase operations, it seems that a failing erase block will
keep the device state machine in erasing state until the vendor
specified maximum timeout period has passed. By this time the driver
would have long since timed out, left erasing state and attempted
further operations which all fail. This patch implements timeouts using
values from the CFI Query structure when available.
The patch also sets a longer timeout for locking operations. The current
value used for locking/unlocking given by 1000000/HZ microseconds is too
short for devices like J3 and J5 Strataflash which have a typical clear
lock-bits time of 0.5 seconds.

Signed-off-by: Anders Grafström <grfstrm@users.sourceforge.net>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-08-06 09:44:54 +01:00
Alexey Korolev 2e489e077a [MTD] [NOR] Add qry_mode_on()/qry_omde_off() to deal with odd chips
There are some CFI chips which require non standard procedures to get 
into QRY mode. The possible way to support them would be trying 
different modes till QRY will be read. This patch introduce two new 
functions qry_mode_on qry_mode_off. qry_mode_on tries different commands 
in order switch chip into QRY mode.

So if we have one more "odd" chip - we just could add several lines to 
qry_mode_on. Also using these functions remove unnecessary code 
duplicaton in porbe procedure.

Currently there are two "odd" cases
1. Some old intel chips which require 0xFF before 0x98
2. ST M29DW chip which requires 0x98 to be sent at 0x555 (according to
CFI should be 0x55)

This patch is partialy based on the patch from Uwe
(see "[PATCH 2/4] [RFC][MTD] cfi_probe: remove Intel chip workaround"
thread )

Signed-off-by: Alexey Korolev <akorolev@infradead.org>
Signed-off-by: Alexander Belyakov <abelyako@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-08-06 09:43:58 +01:00
George G. Davis a0e7229edb [MTD] [NOR] Add "Spansion" to MTD_CFI_AMDSTD kconfig menu description
This long overdue trivial change to the MTD_CFI_AMDSTD kconfig menu
description is intended to help clarify that this option also supports
Spansion flash devices.

Signed-off-by: George G. Davis <gdavis@mvista.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-08-06 09:41:35 +01:00
Julia Lawall c8872b069c [MTD] Use DIV_ROUND_UP
The kernel.h macro DIV_ROUND_UP performs the computation (((n) + (d) - 1) /
(d)) but is perhaps more readable.

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-08-02 18:45:18 +01:00
David Brownell 34a82443b7 [MTD] dataflash OTP support
Now that we can tell when we have one of the newer DataFlash chips,
optionally expose the 128 bytes of OTP memory they provide.  Tested
on at45db642 revision B and D chips.

Switch mtdchar over to a generic HAVE_MTD_OTP flag instead of adding
another #ifdef for each type of chip whose driver has OTP support.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Bryan Wu <cooloney@kernel.org>
Cc: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-08-01 21:47:47 +01:00
Jerry Hicks 4a22442fae [MTD] [NOR] drivers/mtd/chips/jedec_probe.c: fix Am29DL800BB device ID
The device id for Am29DL800BB in jedec_probe.c is wrong.

Reference: http://www.spansion.com/datasheets/21519c4.pdf

I discovered this while working with u-boot.

The u-boot folks mentioned Linux as an upstream reference, thought I'd
post a heads-up here too.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-31 08:34:46 +01:00
Atsushi Nemoto ca6f12c67e [MTD] jedec_probe: Fix SST 16-bit chip detection
The unlock_addr rework in kernel 2.6.25 breaks 16-bit SST chips.  SST
39LF160 and SST 39VF1601 are both 16-bit only chip (do not have BYTE#
pin) and new uaddr value is not correct for them.  Add
MTD_UADDR_0xAAAA_0x5555 for those chips.  Tested with SST 39VF1601
chip.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-25 10:02:47 -04:00
Alexey Korolev 998453fbf2 [MTD] [NOR] Fix -ETIMEO errors in CFI driver
Existing CFI driver has problems with excessive writes during erase.
If CFI driver does many writes during one erase cycle we may face the
messages with -ETIMEO error on erase operation.  It may cause the
following data corruption and kernel panics.

The reason of the issue is related to specifics of suspend operation:
if we write to flash during erase, suspend operation will cost some time
to erase procedure (for P30 it could be significant). In current version of
cfi driver the problem of many suspends is partially workarounded by adding
some time reserv to any operation (8xerase_time) but if we have many writes
during one erase the problem appears.

This patch detects the suspend and resets timer if suspend occured. It
has been well verified on different chips. No problems were found.
Could you please include the patch as it is simple and fixes bad issue.

Signed-off-by: Alexey Korolev <akorolev@infradead.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-25 09:48:42 -04:00
Jean Delvare 3a3688b6af [MTD] [NOR] gen_probe: No debug message when debugging is disabled
Use pr_debug(...) instead of printk(KERN_DEBUG ...) so that the message
is only printed when debugging is enabled.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: John stoffel <john@stoffel.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-11 18:23:11 +01:00
Adrian Bunk 59018b6d2a MTD/JFFS2: remove CVS keywords
Once upon a time, the MTD repository was using CVS.

This patch therefore removes all usages of the no longer updated CVS
keywords from the MTD code.

This also includes code that printed them to the user.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-06-04 17:50:17 +01:00
Mike Rapoport 1b0b30acf3 [MTD] [NOR] Add support for Eon EN29SL800B[BT] NOR flash chips
This patch add support for non-CFI Eon EN29SL800B[BT] NOR flash chips.
The Eon chips have manufacturer ID in the first bank, therefore this patch
depends on support for flash chips with ID in bank other than 0.

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-06-04 17:23:12 +01:00
Mike Rapoport 5c9c11e1c4 [MTD] [NOR] Add support for flash chips with ID in bank other than 0
According to JEDEC "Standard Manufacturer's Identification Code"
(http://www.jedec.org/download/search/jep106W.pdf)
several first banks of NOR flash can contain 0x7f instead of actual ID.
This patch adds support for reading manufacturer ID from banks other than 0.

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-06-04 17:22:59 +01:00
Mike Rapoport 8fd310a1cc [MTD] [NOR] Add support for AMD AM29SL800D[BT] NOR flash chips
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-06-04 17:20:48 +01:00
Nate Case deb1a5f113 [MTD] [NOR] Support for M50FLW080A and M50FLW080B
Add support for M50FLW080A and M50FLW080B revisions of LPC flash
devices.

Signed-off-by: Aaron Lindner <alindner@xes-inc.com>
Signed-off-by: Nate Case <ncase@xes-inc.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-05-14 11:03:46 +01:00
Alexander Belyakov 91949d6454 [MTD] [NOR] Remove cfi_cmdset_0001.c erase suspend fixup typo
Fix typo in erase suspend while write fixup code leading to compile time 
error if CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE was defined.

drivers/mtd/chips/cfi_cmdset_0001.c: In function 'fixup_intel_strataflash':
drivers/mtd/chips/cfi_cmdset_0001.c:212: error: 'struct cfi_pri_amdstd' has no member named 'SuspendCmdSupport'

Signed-off-by: Alexander Belyakov <abelyako@googlemail.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-05-06 15:49:21 +01:00
Jared Hulbert a98889f3d8 [MTD][NOR] Add physical address to point() method
Adding the ability to get a physical address from point() in addition
to virtual address.  This physical address is required for XIP of
userspace code from flash.

Signed-off-by: Jared Hulbert <jaredeh@gmail.com>
Reviewed-by: Jörn Engel <joern@logfs.org>
Acked-by: Nicolas Pitre <nico@cam.org>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-05-01 18:59:11 +01:00
Thomas Kunze fe224668df [MTD] [NOR] Fix Intel CFI driver for collie flash
collie seems to contain LH28F640BF flash chips. According to
http://sharp-world.com/products/device/flash/pdf/*FUM00701*@E.pdf
(page 83) if they have 0x51 of Extended Query Table (number of hardware
partitions) set to zero, they have a single fixed partition.
This patch makes those chips work.

Signed-off-by: Thomas Kunze <thommycheck@gmx.de>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-23 01:32:12 +01:00
Trent Piepho 70b072550a [MTD] [NOR] Fixup for incorrect CFI data in Spansion S29GL064/32N flash chips
This is a known erratum confirmed by Spansion.  I have an errata document,
but I can't find a link to it anywhere on their site to include here.

Some of the S29GL064N chips report 64 sectors when they should report 128,
and some of S29GL032N chips report 127 sectors when they should report 63.

Note that when the chip dies are fixed by Spansion, they will still have
the same id.  The fix is done in such a way that it won't affect corrected
chips.

The fixups use the extended id made available by a previous patch.  Without
that, virtually all newer AMD/Spansion chips will have the same ID (0x227e)
and it's not possible to apply the fixup to the correct chips.

Signed-off-by: Trent Piepho <tpiepho@freescale.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-22 21:17:27 +01:00
Trent Piepho fecb8865de [MTD] [NOR] Read extended device ID from AMD/Spansion CFI flash chips
AMD/Spansion use a device id of 0x7e to indicate an extended device is
present at offset 0xe and 0xf in the query data.

I've verified with Spansion that all their chips (mfr == 0x01) with an id
of 0x7e use it to indicate an extended id is present.  What's more, there
are no chips with a NON-extended id that is the same as a different chip's
extended id.  In other words, when the extended ID is present, one can
replace the normal id with the extended id without losing any information.
Which is what I've done.

Signed-off-by: Trent Piepho <tpiepho@freescale.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-22 21:16:09 +01:00
Andrei Dolnikov 1b0a062be7 [MTD] [NOR] Add JEDEC support for the SST 36VF3203 flash chip
Add support for the SST 36VF3203 flash chip. It is used on Emerson 
KSI8560 board.

Signed-off-by: Andrei Dolnikov <adolnikov@ru.mvista.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-22 20:24:59 +01:00
Paulius Zaleckas ca5c23c3b8 [MTD] XIP: Use generic xip_iprefetch() instead of asm volatile (...)
Untested, but shouldn't break anything... Makes MTD_XIP arch
independent. I guess this is why xip_iprefetch() was made for.

Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
Acked-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-22 19:47:42 +01:00
Adrian Bunk eb8e31831a [MTD] [NOR] cfi_cmdset_0020.c: make a function static
This patch makes the needlessly global cfi_staa_erase_varsize() static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-22 15:56:16 +01:00
Harvey Harrison cb53b3b999 [MTD] replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-22 12:36:04 +01:00
David Woodhouse 35d086b143 [MTD] [JEDEC] Fix whitespace noise in chip table
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-22 12:35:54 +01:00
Gordon Farquharson 30d6a24eb8 [MTD] [JEDEC] add support for the ST M29W400DB flash chip
Add support for the ST M29W400DB flash chip.  which is used on the GLAN Tank
NAS.

Signed-off-by: Gordon Farquharson <gordonfarquharson@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-22 12:35:52 +01:00
Dmitry Adamushko f8e30e447c mtd/chips: add missing set_current_state() to cfi_{amdstd,staa}_sync()
cfi_amdstd_sync() and cfi_staa_sync() call schedule() without changing task's
state appropriately.

In case of e.g.  chip->state == FL_ERASING, cfi_*_sync() will be busy-looping
either redundantly for a fixed interval of time (for SCHED_NORMAL tasks) or
possibly endlessly (for RT tasks and UP).

Signed-off-by: Dmitry Adamushko <dmitry.adamushko@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-08 18:25:53 -07:00
Alexey Korolev fb6d080c6f mtd: fix broken state in CFI driver caused by FL_SHUTDOWN
THe CFI driver in 2.6.24 kernel is broken.  Not so intensive read/write
operations cause incomplete writes which lead to kernel panics in JFFS2.

We investigated the issue - it is caused by bug in FL_SHUTDOWN parsing code.
Sometimes chip returns -EIO as if it is in FL_SHUTDOWN state when it should
wait in FL_PONT (error in order of conditions).

The following patch fixes the bug in state parsing code of CFI.  Also I've
added comments to notify developers if they want to add new case in future.

Signed-off-by: Alexey Korolev <akorolev@infradead.org>
Reviewed-by: Joern Engel <joern@logfs.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-04 14:46:26 -07:00
Rizzo Davide 484b8e64c8 [MTD] [NOR] fix startup lock when using multiple nor flash chips
Taken from http://bugzilla.kernel.org/show_bug.cgi?id=9829

I found and solved the problem, at line 115 of drivers/mtd/chips/gen_probe.c
(kernel 2.6.24): mapsize value must be calculated in bytes, not in long.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-02-07 10:38:12 +00:00
David Woodhouse c1f3ee120b Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git 2008-02-03 18:30:32 +11:00
Justin Treon e619a75ff6 [MTD] Unlocking all Intel flash that is locked on power up.
Patch for unlocking all Intel flash that has instant locking on power up.
The patch has been tested on Intel M18, P30 and J3D Strata Flash.
  1.    The automatic unlocking can be disabled for a particular partition
         in the map or the command line.
     a. For the bit mask in the map it should look like:
         .mask_flags   = MTD_POWERUP_LOCK,
     b. For the command line parsing it should look like:
         mtdparts=0x80000(bootloader)lk
  2.    This will only unlock parts with instant individual block locking.
         Intel parts with legacy unlocking will not be unlocked.

Signed-off-by: Justin Treon <justin_treon@yahoo.com>
Signed-off-by: Jared Hulbert <jaredeh@gmail.com>
Acked-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-02-03 18:25:16 +11:00
Ilpo Järvinen c0d2a48a65 [MTD] jedec probe: drop unnecessary forward declarations
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-02-03 17:58:05 +11:00
Ilpo Järvinen 53d8855392 [MTD] JEDEC probe: kill some inline bloat
$ codiff $OBJ.old $OBJ
drivers/mtd/chips/jedec_probe.c:
  cfi_jedec_setup  | -320
  jedec_probe_chip | -7073
 2 functions changed, 7393 bytes removed, diff: -7393

drivers/mtd/chips/jedec_probe.c:
  jedec_reset | +1151
 1 function changed, 1151 bytes added, diff: +1151

drivers/mtd/chips/jedec_probe.o:
 3 functions changed, 1151 bytes added, 7393 bytes removed, diff: -6242

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-02-03 17:55:41 +11:00
Massimo Cirillo 646fd12784 cache invalidation error for buffered write
The bug causes corruptions of data read from flash.

The original code performs cache invalidation from "adr" to "adr + len"
in do_write_buffer().  Since len and adr could be updated in the code
before invalidation - it causes improper setting of cache invalidation
regions.

Signed-off-by: Massimo Cirillo <maxcir@gmail.com>
Signed-off-by: Giuseppe D'Eliseo <giuseppedeliseo@gmail.com>
Acked-by: Nicolas Pitre <nico@cam.org>
Acked-by: Jörn Engel <joern@logfs.org>
Signed-off-by: David Woohouse <dwmw2@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-11 11:44:37 -08:00
Bartlomiej Sieka de7921f01a [MTD] [NOR] Fix incorrect interface code for x16/x32 chips
According to "Common Flash Memory Interface Publication 100" dated December 1,
2001, the interface code for x16/x32 chips is 0x0005, and not 0x0004 used so
far.

Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-01-10 22:07:12 +00:00
David Woodhouse cec80bf2cc [MTD] [NOR] Attempt to clean up the JEDEC unlock address confusion
Use a single unlock address, adjust it for the device type in the
knowledge that it'll be adjusted back again. This has the desirable
effect of masking out the least significant bit of the address for x16
devices.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-12-03 13:01:21 +00:00
David Woodhouse f6f0f81895 [MTD] [NOR] Fix overflow check in jedec_probe
Having laid the code out so that it's easier to read instead of sticking
to the 80-column guideline even when it doesn't make sense, a bug is
immediately spotted... we were only checking _one_ of the unlock
addresses to see if it runs off the end of the map.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-12-03 12:49:38 +00:00
David Woodhouse 5d3cce3b8e [MTD] [NOR] Clean up jedec_probe, remove unlock address arrays
This should have no functional effects -- we've been ignoring all but
the first address in the array for a long time, and using it only to
indicate which device types are supported.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-12-03 12:48:57 +00:00
Alexander Belyakov 6c24e4161e [MTD] [NOR] Prevent erase command invocation on suspended chip
while running stress tests we have met cfi_cmdset_0001.c driver issue.
Working on multipartitional devices with erase suspend on write
feature enabled it is possible to get erase operation invoked on chip
with suspended erase. get_chip() looses information about earlier
suspended erase and new erase operation gets issued. New erase
operations report successful completion, but blocks remain dirty
causing, for example, JFFS2 error messages like:

...
Newly-erased block contained word 0x20031985 at offset 0x00200000
Newly-erased block contained word 0x20031985 at offset 0x00280000
Newly-erased block contained word 0x20031985 at offset 0x00240000
...

The patch below fixes that issue.

Signed-off-by: Alexander Belyakov <alexander.belyakov@intel.com>
Acked-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-11-26 15:54:16 +00:00
Alexey Korolev b1c9c9be6d [MTD] [NOR] Support Intel P3x flash support with CFI version 1.5
Signed-off-by: Alexey Korolev <akorolev@infradead.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-11-23 09:35:41 +00:00
David Howells 8547e583a1 [MTD] [NOR] Add support for the SST 39VF1601 flash chip
Add support for the SST 39VF1601 flash chip.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-11-09 22:34:07 +00:00
Hans-Christian Egtvedt d10a39d1a5 [MTD] [NOR] More CFI fixups for Atmel chips
Convert CFI tables from Atmel cmdset_0001 chips to Intel format and set
BufWrite timeouts to 0 for Atmel cmdset_0001 and cmdset_0002 chips.
Some chips may indicate support for buffered writes even though they
only support dual-word writes.

The CFI fixup must run before fixup_use_write_buffers for this to work.

Signed-off-by: Håvard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-10-30 12:06:42 -04:00
Alexey Korolev 5a37cf19ef [MTD] [NOR] Fix deadlock in Intel chip driver caused by get_chip recursion
This patch solves kernel deadlock issue seen on JFFF2 simultaneous 
operations. Detailed investigation of the issue showed that the kernel 
deadlock is caused by tons of recursive get_chip calls.

Signed-off-by: Alexey Korolev <akorolev@infradead.org>
Acked-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-10-23 12:07:52 +01:00
Kevin Hao c4a9f88daf [MTD] [NOR] fix ctrl-alt-del can't reboot for intel flash bug
When we press ctrl-alt-del,kernel_restart_prepare will invoke 
cfi_intelext_reboot which will set flash to read array mode, but later 
when device_shutdown is invoked which may put current work queue to 
sleep and other process may be scheduled to running and programming 
flash in not FL_READY mode again. So we can't boot up if this flash is 
used for bootloader.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-10-13 14:36:18 +01:00
Andy Lowe 097f2576eb [MTD] fix CFI point method for discontiguous maps
The CFI probe routine is capable of detecting flash banks consisting of
identical chips mapped to physically discontiguous addresses.  (One
common way this can occur is if a flash bank is populated with chips of
less capacity than the hardware was designed to support.)  The CFI
point() routine currently ignores any such gaps.  This patch fixes
the CFI point() routine so that it truncates any request that would
span a gap.

Signed-off-by: Andy Lowe <alowe@mvista.com>
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-09-23 18:40:49 +01:00