cpuhp_state_add_instance() and cpuhp_state_remove_instance() should
be used in pairs. Or there will lead to the warn on
cpuhp_remove_multi_state() since the cpuhp_step list is not empty.
The following is the error log with 'rmmod coresight-trbe':
Error: Removing state 215 which has instances left.
Call trace:
__cpuhp_remove_state_cpuslocked+0x144/0x160
__cpuhp_remove_state+0xac/0x100
arm_trbe_device_remove+0x2c/0x60 [coresight_trbe]
platform_remove+0x34/0x70
device_remove+0x54/0x90
device_release_driver_internal+0x1e4/0x250
driver_detach+0x5c/0xb0
bus_remove_driver+0x64/0xc0
driver_unregister+0x3c/0x70
platform_driver_unregister+0x20/0x30
arm_trbe_exit+0x1c/0x658 [coresight_trbe]
__arm64_sys_delete_module+0x1ac/0x24c
invoke_syscall+0x50/0x120
el0_svc_common.constprop.0+0x58/0x1a0
do_el0_svc+0x38/0xd0
el0_svc+0x2c/0xc0
el0t_64_sync_handler+0x1ac/0x1b0
el0t_64_sync+0x19c/0x1a0
---[ end trace 0000000000000000 ]---
Fixes: 3fbf7f011f ("coresight: sink: Add TRBE driver")
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20221122090355.23533-1-shenyang39@huawei.com
etm4x devices cannot be successfully probed when their CPU is offline.
For example, when booting with maxcpus=n, ETM probing will fail on
CPUs >n, and the probing won't be reattempted once the CPUs come
online. This will leave those CPUs unable to make use of ETM.
This change adds a mechanism to delay the probing if the corresponding
CPU is offline, and to try it again when the CPU comes online.
Signed-off-by: Tamas Zsoldos <tamas.zsoldos@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20220705145935.24679-1-tamas.zsoldos@arm.com
cti_enable_hw() and cti_disable_hw() are called from an atomic context
so shouldn't use runtime PM because it can result in a sleep when
communicating with firmware.
Since commit 3c66563378 ("Revert "firmware: arm_scmi: Add clock
management to the SCMI power domain""), this causes a hang on Juno when
running the Perf Coresight tests or running this command:
perf record -e cs_etm//u -- ls
This was also missed until the revert commit because pm_runtime_put()
was called with the wrong device until commit 692c9a499b ("coresight:
cti: Correct the parameter for pm_runtime_put")
With lock and scheduler debugging enabled the following is output:
coresight cti_sys0: cti_enable_hw -- dev:cti_sys0 parent: 20020000.cti
BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:1151
in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 330, name: perf-exec
preempt_count: 2, expected: 0
RCU nest depth: 0, expected: 0
INFO: lockdep is turned off.
irq event stamp: 0
hardirqs last enabled at (0): [<0000000000000000>] 0x0
hardirqs last disabled at (0): [<ffff80000822b394>] copy_process+0xa0c/0x1948
softirqs last enabled at (0): [<ffff80000822b394>] copy_process+0xa0c/0x1948
softirqs last disabled at (0): [<0000000000000000>] 0x0
CPU: 3 PID: 330 Comm: perf-exec Not tainted 6.0.0-00053-g042116d99298 #7
Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform, BIOS EDK II Sep 13 2022
Call trace:
dump_backtrace+0x134/0x140
show_stack+0x20/0x58
dump_stack_lvl+0x8c/0xb8
dump_stack+0x18/0x34
__might_resched+0x180/0x228
__might_sleep+0x50/0x88
__pm_runtime_resume+0xac/0xb0
cti_enable+0x44/0x120
coresight_control_assoc_ectdev+0xc0/0x150
coresight_enable_path+0xb4/0x288
etm_event_start+0x138/0x170
etm_event_add+0x48/0x70
event_sched_in.isra.122+0xb4/0x280
merge_sched_in+0x1fc/0x3d0
visit_groups_merge.constprop.137+0x16c/0x4b0
ctx_sched_in+0x114/0x1f0
perf_event_sched_in+0x60/0x90
ctx_resched+0x68/0xb0
perf_event_exec+0x138/0x508
begin_new_exec+0x52c/0xd40
load_elf_binary+0x6b8/0x17d0
bprm_execve+0x360/0x7f8
do_execveat_common.isra.47+0x218/0x238
__arm64_sys_execve+0x48/0x60
invoke_syscall+0x4c/0x110
el0_svc_common.constprop.4+0xfc/0x120
do_el0_svc+0x34/0xc0
el0_svc+0x40/0x98
el0t_64_sync_handler+0x98/0xc0
el0t_64_sync+0x170/0x174
Fix the issue by removing the runtime PM calls completely. They are not
needed here because it must have already been done when building the
path for a trace.
Fixes: 835d722ba1 ("coresight: cti: Initial CoreSight CTI Driver")
Cc: stable <stable@kernel.org>
Reported-by: Aishwarya TCV <Aishwarya.TCV@arm.com>
Reported-by: Cristian Marussi <Cristian.Marussi@arm.com>
Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Tested-by: Mike Leach <mike.leach@linaro.org>
[ Fix build warnings ]
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20221025131032.1149459-1-suzuki.poulose@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cti_enable_hw() and cti_disable_hw() are called from an atomic context
so shouldn't use runtime PM because it can result in a sleep when
communicating with firmware.
Since commit 3c66563378 ("Revert "firmware: arm_scmi: Add clock
management to the SCMI power domain""), this causes a hang on Juno when
running the Perf Coresight tests or running this command:
perf record -e cs_etm//u -- ls
This was also missed until the revert commit because pm_runtime_put()
was called with the wrong device until commit 692c9a499b ("coresight:
cti: Correct the parameter for pm_runtime_put")
With lock and scheduler debugging enabled the following is output:
coresight cti_sys0: cti_enable_hw -- dev:cti_sys0 parent: 20020000.cti
BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:1151
in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 330, name: perf-exec
preempt_count: 2, expected: 0
RCU nest depth: 0, expected: 0
INFO: lockdep is turned off.
irq event stamp: 0
hardirqs last enabled at (0): [<0000000000000000>] 0x0
hardirqs last disabled at (0): [<ffff80000822b394>] copy_process+0xa0c/0x1948
softirqs last enabled at (0): [<ffff80000822b394>] copy_process+0xa0c/0x1948
softirqs last disabled at (0): [<0000000000000000>] 0x0
CPU: 3 PID: 330 Comm: perf-exec Not tainted 6.0.0-00053-g042116d99298 #7
Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform, BIOS EDK II Sep 13 2022
Call trace:
dump_backtrace+0x134/0x140
show_stack+0x20/0x58
dump_stack_lvl+0x8c/0xb8
dump_stack+0x18/0x34
__might_resched+0x180/0x228
__might_sleep+0x50/0x88
__pm_runtime_resume+0xac/0xb0
cti_enable+0x44/0x120
coresight_control_assoc_ectdev+0xc0/0x150
coresight_enable_path+0xb4/0x288
etm_event_start+0x138/0x170
etm_event_add+0x48/0x70
event_sched_in.isra.122+0xb4/0x280
merge_sched_in+0x1fc/0x3d0
visit_groups_merge.constprop.137+0x16c/0x4b0
ctx_sched_in+0x114/0x1f0
perf_event_sched_in+0x60/0x90
ctx_resched+0x68/0xb0
perf_event_exec+0x138/0x508
begin_new_exec+0x52c/0xd40
load_elf_binary+0x6b8/0x17d0
bprm_execve+0x360/0x7f8
do_execveat_common.isra.47+0x218/0x238
__arm64_sys_execve+0x48/0x60
invoke_syscall+0x4c/0x110
el0_svc_common.constprop.4+0xfc/0x120
do_el0_svc+0x34/0xc0
el0_svc+0x40/0x98
el0t_64_sync_handler+0x98/0xc0
el0t_64_sync+0x170/0x174
Fix the issue by removing the runtime PM calls completely. They are not
needed here because it must have already been done when building the
path for a trace.
Fixes: 835d722ba1 ("coresight: cti: Initial CoreSight CTI Driver")
Reported-by: Aishwarya TCV <Aishwarya.TCV@arm.com>
Reported-by: Cristian Marussi <Cristian.Marussi@arm.com>
Suggested-by: Suzuki Poulose <Suzuki.Poulose@arm.com>
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Tested-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20221005131452.1506328-1-james.clark@arm.com
With lockdeps enabled, we get the following warning:
======================================================
WARNING: possible circular locking dependency detected
------------------------------------------------------
kworker/u12:1/53 is trying to acquire lock:
ffff80000adce220 (coresight_mutex){+.+.}-{4:4}, at: coresight_set_assoc_ectdev_mutex+0x3c/0x5c
but task is already holding lock:
ffff80000add1f60 (ect_mutex){+.+.}-{4:4}, at: cti_probe+0x318/0x394
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (ect_mutex){+.+.}-{4:4}:
__mutex_lock_common+0xd8/0xe60
mutex_lock_nested+0x44/0x50
cti_add_assoc_to_csdev+0x4c/0x184
coresight_register+0x2f0/0x314
tmc_probe+0x33c/0x414
-> #0 (coresight_mutex){+.+.}-{4:4}:
__lock_acquire+0x1a20/0x32d0
lock_acquire+0x160/0x308
__mutex_lock_common+0xd8/0xe60
mutex_lock_nested+0x44/0x50
coresight_set_assoc_ectdev_mutex+0x3c/0x5c
cti_update_conn_xrefs+0x6c/0xf8
cti_probe+0x33c/0x394
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(ect_mutex);
lock(coresight_mutex);
lock(ect_mutex);
lock(coresight_mutex);
*** DEADLOCK ***
4 locks held by kworker/u12:1/53:
#0: ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work+0x1fc/0x63c
#1: (deferred_probe_work){+.+.}-{0:0}, at: process_one_work+0x228/0x63c
#2: (&dev->mutex){....}-{4:4}, at: __device_attach+0x48/0x1a8
#3: (ect_mutex){+.+.}-{4:4}, at: cti_probe+0x318/0x394
To fix the same, call cti_add_assoc_to_csdev without the holding
coresight_mutex and confine the locking while setting the associated
ect / cti device using coresight_set_assoc_ectdev_mutex().
Fixes: 177af8285b ("coresight: cti: Enable CTI associated with devices")
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20220721130329.3787211-1-sudeep.holla@arm.com
Here is the large set of char/misc and other small driver subsystem
changes for 6.1-rc1. Loads of different things in here:
- IIO driver updates, additions, and changes. Probably the largest
part of the diffstat
- habanalabs driver update with support for new hardware and features,
the second largest part of the diff.
- fpga subsystem driver updates and additions
- mhi subsystem updates
- Coresight driver updates
- gnss subsystem updates
- extcon driver updates
- icc subsystem updates
- fsi subsystem updates
- nvmem subsystem and driver updates
- misc driver updates
- speakup driver additions for new features
- lots of tiny driver updates and cleanups
All of these have been in the linux-next tree for a while with no
reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY0GQmA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylyVQCeNJjZ3hy+Wz8WkPSY+NkehuIhyCIAnjXMOJP8
5G/JQ+rpcclr7VOXlS66
=zVkU
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver updates from Greg KH:
"Here is the large set of char/misc and other small driver subsystem
changes for 6.1-rc1. Loads of different things in here:
- IIO driver updates, additions, and changes. Probably the largest
part of the diffstat
- habanalabs driver update with support for new hardware and
features, the second largest part of the diff.
- fpga subsystem driver updates and additions
- mhi subsystem updates
- Coresight driver updates
- gnss subsystem updates
- extcon driver updates
- icc subsystem updates
- fsi subsystem updates
- nvmem subsystem and driver updates
- misc driver updates
- speakup driver additions for new features
- lots of tiny driver updates and cleanups
All of these have been in the linux-next tree for a while with no
reported issues"
* tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (411 commits)
w1: Split memcpy() of struct cn_msg flexible array
spmi: pmic-arb: increase SPMI transaction timeout delay
spmi: pmic-arb: block access for invalid PMIC arbiter v5 SPMI writes
spmi: pmic-arb: correct duplicate APID to PPID mapping logic
spmi: pmic-arb: add support to dispatch interrupt based on IRQ status
spmi: pmic-arb: check apid against limits before calling irq handler
spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq
spmi: pmic-arb: handle spurious interrupt
spmi: pmic-arb: add a print in cleanup_irq
drivers: spmi: Directly use ida_alloc()/free()
MAINTAINERS: add TI ECAP driver info
counter: ti-ecap-capture: capture driver support for ECAP
Documentation: ABI: sysfs-bus-counter: add frequency & num_overflows items
dt-bindings: counter: add ti,am62-ecap-capture.yaml
counter: Introduce the COUNTER_COMP_ARRAY component type
counter: Consolidate Counter extension sysfs attribute creation
counter: Introduce the Count capture component
counter: 104-quad-8: Add Signal polarity component
counter: Introduce the Signal polarity component
counter: interrupt-cnt: Implement watch_validate callback
...
After the conversion to automatically generating the ID_AA64DFR0_EL1
definition names, the build fails in a few different places because some
of the definitions were not changed to their new names along the way.
Update the names to resolve the build errors.
Fixes: c0357a73fa ("arm64/sysreg: Align field names in ID_AA64DFR0_EL1 with architecture")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220919160928.3905780-1-nathan@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
drivers/hwtracing/ptt/hisi_ptt.c:13:10: fatal error: linux/dma-iommu.h: No such file or directory
13 | #include <linux/dma-iommu.h>
| ^~~~~~~~~~~~~~~~~~~
Caused by:
commit ff0de066b4 ("hwtracing: hisi_ptt: Add trace function support for HiSilicon PCIe Tune and Trace device")
interacting with:
commit f2042ed21d ("iommu/dma: Make header private")
from the iommu tree.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Yicong Yang <yangyicong@hisilicon.com>
[Fixed subject line and added changelog text]
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Add tune function for the HiSilicon Tune and Trace device. The interface
of tune is exposed through sysfs attributes of PTT PMU device.
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20220816114414.4092-4-yangyicong@huawei.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
HiSilicon PCIe tune and trace device(PTT) is a PCIe Root Complex integrated
Endpoint(RCiEP) device, providing the capability to dynamically monitor and
tune the PCIe traffic and trace the TLP headers.
Add the driver for the device to enable the trace function. Register PMU
device of PTT trace, then users can use trace through perf command. The
driver makes use of perf AUX trace function and support the following
events to configure the trace:
- filter: select Root port or Endpoint to trace
- type: select the type of traced TLP headers
- direction: select the direction of traced TLP headers
- format: select the data format of the traced TLP headers
This patch initially add basic trace support of PTT device.
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20220816114414.4092-3-yangyicong@huawei.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
When building without CONFIG_CORESIGHT_CTI_INTEGRATION_REGS, there is a
warning about coresight_cti_reg_store() being unused in the file:
drivers/hwtracing/coresight/coresight-cti-sysfs.c:184:16: warning: 'coresight_cti_reg_store' defined but not used [-Wunused-function]
184 | static ssize_t coresight_cti_reg_store(struct device *dev,
| ^~~~~~~~~~~~~~~~~~~~~~~
This is expected as coresight_cti_reg_store() is only used in the
coresight_cti_reg_rw macro, which is only used in a block guarded by
CONFIG_CORESIGHT_CTI_INTEGRATION_REGS. Mark coresight_cti_reg_store() as
__maybe_unused to clearly indicate that the function may be unused
depending on the configuration.
Fixes: fbca79e554 ("coresight: cti-sysfs: Re-use same functions for similar sysfs register accessors")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20220901195055.1932340-1-nathan@kernel.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
New csdev_access functions were added as part of the previous
refactor. In order to make them more consistent with the
existing ones, change any signed offset types to be unsigned.
Now that they are unsigned, stop using hi_off = -1 to signify
a single 32bit access. Instead just call the existing 32bit
accessors. This is also applied to other parts of the codebase,
and the coresight_{read,write}_reg_pair() functions can be
deleted.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Link: https://lore.kernel.org/r/20220830172614.340962-6-james.clark@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Currently each accessor macro creates an identical function which wastes
space in the text area and pollutes the ftrace function name list.
Change it so that the same function is used, but the register to access
is passed in as parameter rather than baked into each function.
Note that only the single accessor is used here and not
csdev_access_relaxed_read_pair() like in the previous commit, so
so a single unsigned offset value is stored instead.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Link: https://lore.kernel.org/r/20220830172614.340962-5-james.clark@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Currently each accessor macro creates an identical function which wastes
space in the text area and pollutes the ftrace function names. Change it
so that the same function is used, but the register to access is passed
in as parameter rather than baked into each function.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Link: https://lore.kernel.org/r/20220830172614.340962-4-james.clark@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The coresight_device struct is available in the sysfs accessor, and this
contains a csdev_access struct which can be used to access registers.
Use this instead of passing in the type of each drvdata so that a common
function can be shared between all the cs drivers.
No functional changes.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Link: https://lore.kernel.org/r/20220830172614.340962-3-james.clark@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The ability to use a custom function in this sysfs show function isn't
used so remove it.
No functional changes.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Link: https://lore.kernel.org/r/20220830172614.340962-2-james.clark@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Add a new sysfs interface in /sys/bus/coresight/devices/etm<N>/ts_source
indicating the configured timestamp source when the ETM device driver
was probed.
The perf tool will use this information to detect if the trace data
timestamp matches the kernel time, enabling correlation of CoreSight
trace with perf events.
Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: German Gomez <german.gomez@arm.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20220823160650.455823-2-james.clark@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
There are three independent sets of changes:
- Sai Prakash Ranjan adds tracing support to the asm-generic
version of the MMIO accessors, which is intended to help
understand problems with device drivers and has been part
of Qualcomm's vendor kernels for many years.
- A patch from Sebastian Siewior to rework the handling of
IRQ stacks in softirqs across architectures, which is
needed for enabling PREEMPT_RT.
- The last patch to remove the CONFIG_VIRT_TO_BUS option and
some of the code behind that, after the last users of this
old interface made it in through the netdev, scsi, media and
staging trees.
-----BEGIN PGP SIGNATURE-----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=aTR0
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"There are three independent sets of changes:
- Sai Prakash Ranjan adds tracing support to the asm-generic version
of the MMIO accessors, which is intended to help understand
problems with device drivers and has been part of Qualcomm's vendor
kernels for many years
- A patch from Sebastian Siewior to rework the handling of IRQ stacks
in softirqs across architectures, which is needed for enabling
PREEMPT_RT
- The last patch to remove the CONFIG_VIRT_TO_BUS option and some of
the code behind that, after the last users of this old interface
made it in through the netdev, scsi, media and staging trees"
* tag 'asm-generic-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
uapi: asm-generic: fcntl: Fix typo 'the the' in comment
arch/*/: remove CONFIG_VIRT_TO_BUS
soc: qcom: geni: Disable MMIO tracing for GENI SE
serial: qcom_geni_serial: Disable MMIO tracing for geni serial
asm-generic/io: Add logging support for MMIO accessors
KVM: arm64: Add a flag to disable MMIO trace for nVHE KVM
lib: Add register read/write tracing support
drm/meson: Fix overflow implicit truncation warnings
irqchip/tegra: Fix overflow implicit truncation warnings
coresight: etm4x: Use asm-generic IO memory barriers
arm64: io: Use asm-generic high level MMIO accessors
arch/*: Disable softirq stacks on PREEMPT_RT.
- Fixes LOCKDEP warnings on module unload with configfs
- Conversion of DT bindings to DT schema
- Branch broadcast support for perf cs_etm
- Etm4x driver fixes for build failures with Clang and unrolled loops
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
-----BEGIN PGP SIGNATURE-----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=yODb
-----END PGP SIGNATURE-----
Merge tag 'coresight-next-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux into char-misc-next
Suzuki writes:
CoreSight self-hosted tracing changes for v5.20.
- Fixes LOCKDEP warnings on module unload with configfs
- Conversion of DT bindings to DT schema
- Branch broadcast support for perf cs_etm
- Etm4x driver fixes for build failures with Clang and unrolled loops
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
* tag 'coresight-next-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux:
coresight: etm4x: avoid build failure with unrolled loops
Documentation: coresight: Expand branch broadcast documentation
Documentation: coresight: Link config options to existing documentation
Documentation: coresight: Turn numbered subsections into real subsections
coresight: Add config flag to enable branch broadcast
Documentation: coresight: Escape coresight bindings file wildcard
dt-bindings: arm: Convert CoreSight CPU debug to DT schema
dt-bindings: arm: Convert CoreSight bindings to DT schema
dt-bindings: arm: Rename Coresight filenames to match compatible
coresight: syscfg: Update load and unload operations
coresight: configfs: Fix unload of configurations on module exit
coresight: Clear the connection field properly
When the following configs are enabled:
* CORESIGHT
* CORESIGHT_SOURCE_ETM4X
* UBSAN
* UBSAN_TRAP
Clang fails assemble the kernel with the error:
<instantiation>:1:7: error: expected constant expression in '.inst' directive
.inst (0xd5200000|((((2) << 19) | ((1) << 16) | (((((((((((0x160 + (i * 4))))) >> 2))) >> 7) & 0x7)) << 12) | ((((((((((0x160 + (i * 4))))) >> 2))) & 0xf)) << 8) | (((((((((((0x160 + (i * 4))))) >> 2))) >> 4) & 0x7)) << 5)))|(.L__reg_num_x8))
^
drivers/hwtracing/coresight/coresight-etm4x-core.c:702:4: note: while in
macro instantiation
etm4x_relaxed_read32(csa, TRCCNTVRn(i));
^
drivers/hwtracing/coresight/coresight-etm4x.h:403:4: note: expanded from
macro 'etm4x_relaxed_read32'
read_etm4x_sysreg_offset((offset), false)))
^
drivers/hwtracing/coresight/coresight-etm4x.h:383:12: note: expanded
from macro 'read_etm4x_sysreg_offset'
__val = read_etm4x_sysreg_const_offset((offset)); \
^
drivers/hwtracing/coresight/coresight-etm4x.h:149:2: note: expanded from
macro 'read_etm4x_sysreg_const_offset'
READ_ETM4x_REG(ETM4x_OFFSET_TO_REG(offset))
^
drivers/hwtracing/coresight/coresight-etm4x.h:144:2: note: expanded from
macro 'READ_ETM4x_REG'
read_sysreg_s(ETM4x_REG_NUM_TO_SYSREG((reg)))
^
arch/arm64/include/asm/sysreg.h:1108:15: note: expanded from macro
'read_sysreg_s'
asm volatile(__mrs_s("%0", r) : "=r" (__val)); \
^
arch/arm64/include/asm/sysreg.h:1074:2: note: expanded from macro '__mrs_s'
" mrs_s " v ", " __stringify(r) "\n" \
^
Consider the definitions of TRCSSCSRn and TRCCNTVRn:
drivers/hwtracing/coresight/coresight-etm4x.h:56
#define TRCCNTVRn(n) (0x160 + (n * 4))
drivers/hwtracing/coresight/coresight-etm4x.h:81
#define TRCSSCSRn(n) (0x2A0 + (n * 4))
Where the macro parameter is expanded to i; a loop induction variable
from etm4_disable_hw.
When any compiler can determine that loops may be unrolled, then the
__builtin_constant_p check in read_etm4x_sysreg_offset() defined in
drivers/hwtracing/coresight/coresight-etm4x.h may evaluate to true. This
can lead to the expression `(0x160 + (i * 4))` being passed to
read_etm4x_sysreg_const_offset. Via the trace above, this is passed
through READ_ETM4x_REG, read_sysreg_s, and finally to __mrs_s where it
is string-ified and used directly in inline asm.
Regardless of which compiler or compiler options determine whether a
loop can or can't be unrolled, which determines whether
__builtin_constant_p evaluates to true when passed an expression using a
loop induction variable, it is NEVER safe to allow the preprocessor to
construct inline asm like:
asm volatile (".inst (0x160 + (i * 4))" : "=r"(__val));
^ expected constant expression
Instead of read_etm4x_sysreg_offset() using __builtin_constant_p(), use
__is_constexpr from include/linux/const.h instead to ensure only
expressions that are valid integer constant expressions get passed
through to read_sysreg_s().
This is not a bug in clang; it's a potentially unsafe use of the macro
arguments in read_etm4x_sysreg_offset dependent on __builtin_constant_p.
Link: https://github.com/ClangBuiltLinux/linux/issues/1310
Reported-by: Arnd Bergmann <arnd@kernel.org>
Reported-by: Tao Zhang <quic_taozha@quicinc.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20220708231520.3958391-1-ndesaulniers@google.com
Add support for the Trace Hub in Raptor Lake-S CPU.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: https://lore.kernel.org/r/20220705082637.59979-7-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for the Trace Hub in Raptor Lake-S PCH.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: https://lore.kernel.org/r/20220705082637.59979-6-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for the Trace Hub in Meteor Lake-P.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: https://lore.kernel.org/r/20220705082637.59979-5-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After commit f5ff79fddf ("dma-mapping: remove CONFIG_DMA_REMAP") there's
a chance of DMA buffer getting allocated via vmalloc(), which messes up
the mmapping code:
> RIP: msc_mmap_fault [intel_th_msu]
> Call Trace:
> <TASK>
> __do_fault
> do_fault
...
Fix this by accounting for vmalloc possibility.
Fixes: ba39bd8306 ("intel_th: msu: Switch over to scatterlist")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: https://lore.kernel.org/r/20220705082637.59979-4-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The return value of dma_alloc_coherent() needs to be checked.
To avoid use of null pointer in sg_set_buf() in case of the failure of
alloc.
Fixes: f220df66f6 ("intel_th: msu-sink: An example msu buffer "sink"")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: https://lore.kernel.org/r/20220705082637.59979-3-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If an error occurs after calling 'pci_alloc_irq_vectors()',
'pci_free_irq_vectors()' must be called as already done in the remove
function.
Fixes: 7b7036d47c ("intel_th: pci: Use MSI interrupt signalling")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: https://lore.kernel.org/r/20220705082637.59979-2-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When enabled, all taken branch addresses are output, even if the branch
was because of a direct branch instruction. This enables reconstruction
of the program flow without having access to the memory image of the
code being executed.
Use bit 8 for the config option which would be the correct bit for
programming ETMv3. Although branch broadcast can't be enabled on ETMv3
because it's not in the define ETM3X_SUPPORTED_OPTIONS, using the
correct bit might help prevent future collisions or allow it to be
enabled if needed.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20220511144601.2257870-2-james.clark@arm.com
The configfs system is a source of access to the config information in the
configuration and feature lists.
This can result in additional LOCKDEP issues as a result of the mutex
ordering between the config list mutex (cscfg_mutex) and the configfs
system mutexes.
As such we need to adjust how load/unload operations work to ensure correct
operation.
1) Previously the cscfg_mutex was held throughout the load/unload
operation. This is now only held during configuration list manipulations,
resulting in a multi-stage load/unload process.
2) All operations that manipulate the configfs representation of the
configurations and features are now separated out and run without the
cscfg_mutex being held. This avoids circular lock_dep issue with the
built-in configfs mutexes and semaphores
3) As the load and unload is now multi-stage, some parts under the
cscfg_mutex and others not:
i) A flag indicating a load / unload operation in progress is used to
serialise load / unload operations.
ii) activating any configuration not possible when unload is in progress.
iii) Configurations have an "available" flag set only after the last load
stage for the configuration is complete. Activation of the configuration
not possible till flag is set.
4) Following load/unload rules remain:
i) Unload prevented while any configuration is active remains.
ii) Unload in strict reverse order of load.
iii) Existing configurations can be activated while a new load operation
is underway. (by definition there can be no dependencies between an
existing configuration and a new loading one due to ii) above.)
Fixes: eb2ec49606 ("coresight: syscfg: Update load API for config loadable modules")
Reported-by: Suzuki Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Reviewed-and-tested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20220628173004.30002-3-mike.leach@linaro.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Any loaded configurations must be correctly unloaded on coresight module
exit, or issues can arise with nested locking in the configfs directory
code if built with CONFIG_LOCKDEP.
Prior to this patch, the preloaded configuration configfs directory entries
were being unloaded by the recursive code in
configfs_unregister_subsystem().
However, when built with CONFIG_LOCKDEP, this caused a nested lock warning,
which was not mitigated by the LOCKDEP dependent code in fs/configfs/dir.c
designed to prevent this, due to the different directory levels for the
root of the directory being removed.
As the preloaded (and all other) configurations are registered after
configfs_register_subsystem(), we now explicitly unload them before the
call to configfs_unregister_subsystem().
The new routine cscfg_unload_cfgs_on_exit() iterates through the load
owner list to unload any remaining configurations that were not unloaded
by the user before the module exits. This covers both the
CSCFG_OWNER_PRELOAD and CSCFG_OWNER_MODULE owner types, and will be
extended to cover future load owner types for CoreSight configurations.
Fixes: eb2ec49606 ("coresight: syscfg: Update load API for config loadable modules")
Reported-by: Suzuki Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Reviewed-and-tested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20220628173004.30002-2-mike.leach@linaro.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
coresight devices track their connections (output connections) and
hold a reference to the fwnode. When a device goes away, we walk through
the devices on the coresight bus and make sure that the references
are dropped. This happens both ways:
a) For all output connections from the device, drop the reference to
the target device via coresight_release_platform_data()
b) Iterate over all the devices on the coresight bus and drop the
reference to fwnode if *this* device is the target of the output
connection, via coresight_remove_conns()->coresight_remove_match().
However, the coresight_remove_match() doesn't clear the fwnode field,
after dropping the reference, this causes use-after-free and
additional refcount drops on the fwnode.
e.g., if we have two devices, A and B, with a connection, A -> B.
If we remove B first, B would clear the reference on B, from A
via coresight_remove_match(). But when A is removed, it still has
a connection with fwnode still pointing to B. Thus it tries to drops
the reference in coresight_release_platform_data(), raising the bells
like :
[ 91.990153] ------------[ cut here ]------------
[ 91.990163] refcount_t: addition on 0; use-after-free.
[ 91.990212] WARNING: CPU: 0 PID: 461 at lib/refcount.c:25 refcount_warn_saturate+0xa0/0x144
[ 91.990260] Modules linked in: coresight_funnel coresight_replicator coresight_etm4x(-)
crct10dif_ce coresight ip_tables x_tables ipv6 [last unloaded: coresight_cpu_debug]
[ 91.990398] CPU: 0 PID: 461 Comm: rmmod Tainted: G W T 5.19.0-rc2+ #53
[ 91.990418] Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform, BIOS EDK II Feb 1 2019
[ 91.990434] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 91.990454] pc : refcount_warn_saturate+0xa0/0x144
[ 91.990476] lr : refcount_warn_saturate+0xa0/0x144
[ 91.990496] sp : ffff80000c843640
[ 91.990509] x29: ffff80000c843640 x28: ffff800009957c28 x27: ffff80000c8439a8
[ 91.990560] x26: ffff00097eff1990 x25: ffff8000092b6ad8 x24: ffff00097eff19a8
[ 91.990610] x23: ffff80000c8439a8 x22: 0000000000000000 x21: ffff80000c8439c2
[ 91.990659] x20: 0000000000000000 x19: ffff00097eff1a10 x18: ffff80000ab99c40
[ 91.990708] x17: 0000000000000000 x16: 0000000000000000 x15: ffff80000abf6fa0
[ 91.990756] x14: 000000000000001d x13: 0a2e656572662d72 x12: 657466612d657375
[ 91.990805] x11: 203b30206e6f206e x10: 6f69746964646120 x9 : ffff8000081aba28
[ 91.990854] x8 : 206e6f206e6f6974 x7 : 69646461203a745f x6 : 746e756f63666572
[ 91.990903] x5 : ffff00097648ec58 x4 : 0000000000000000 x3 : 0000000000000027
[ 91.990952] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff00080260ba00
[ 91.991000] Call trace:
[ 91.991012] refcount_warn_saturate+0xa0/0x144
[ 91.991034] kobject_get+0xac/0xb0
[ 91.991055] of_node_get+0x2c/0x40
[ 91.991076] of_fwnode_get+0x40/0x60
[ 91.991094] fwnode_handle_get+0x3c/0x60
[ 91.991116] fwnode_get_nth_parent+0xf4/0x110
[ 91.991137] fwnode_full_name_string+0x48/0xc0
[ 91.991158] device_node_string+0x41c/0x530
[ 91.991178] pointer+0x320/0x3ec
[ 91.991198] vsnprintf+0x23c/0x750
[ 91.991217] vprintk_store+0x104/0x4b0
[ 91.991238] vprintk_emit+0x8c/0x360
[ 91.991257] vprintk_default+0x44/0x50
[ 91.991276] vprintk+0xcc/0xf0
[ 91.991295] _printk+0x68/0x90
[ 91.991315] of_node_release+0x13c/0x14c
[ 91.991334] kobject_put+0x98/0x114
[ 91.991354] of_node_put+0x24/0x34
[ 91.991372] of_fwnode_put+0x40/0x5c
[ 91.991390] fwnode_handle_put+0x38/0x50
[ 91.991411] coresight_release_platform_data+0x74/0xb0 [coresight]
[ 91.991472] coresight_unregister+0x64/0xcc [coresight]
[ 91.991525] etm4_remove_dev+0x64/0x78 [coresight_etm4x]
[ 91.991563] etm4_remove_amba+0x1c/0x2c [coresight_etm4x]
[ 91.991598] amba_remove+0x3c/0x19c
Reproducible by: (Build all coresight components as modules):
#!/bin/sh
while true
do
for m in tmc stm cpu_debug etm4x replicator funnel
do
modprobe coresight_${m}
done
for m in tmc stm cpu_debug etm4x replicator funnel
do
rmmode coresight_${m}
done
done
Cc: stable@vger.kernel.org
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Fixes: 37ea1ffddf ("coresight: Use fwnode handle instead of device names")
Link: https://lore.kernel.org/r/20220614214024.3005275-1-suzuki.poulose@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Per discussion in [1], it was decided to move to using architecture
independent/asm-generic IO memory barriers to have just one set of
them and deprecate use of arm64 specific IO memory barriers in driver
code. So replace current usage of __io_rmb()/__iowmb() in drivers to
__io_ar()/__io_bw().
[1] https://lore.kernel.org/lkml/CAK8P3a0L2tLeF1Q0+0ijUxhGNaw+Z0fyPC1oW6_ELQfn0=i4iw@mail.gmail.com/
Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The panic notifier infrastructure executes registered callbacks when
a panic event happens - such callbacks are executed in atomic context,
with interrupts and preemption disabled in the running CPU and all other
CPUs disabled. That said, mutexes in such context are not a good idea.
This patch replaces a regular mutex with a mutex_trylock safer approach;
given the nature of the mutex used in the driver, it should be pretty
uncommon being unable to acquire such mutex in the panic path, hence
no functional change should be observed (and if it is, that would be
likely a deadlock with the regular mutex).
Fixes: 2227b7c746 ("coresight: add support for CPU debug module")
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20220427224924.592546-10-gpiccoli@igalia.com
It is possibe that probe failure issue happens when the device
and its child_device's probe happens at the same time.
In coresight_make_links, has_conns_grp is true for parent, but
has_conns_grp is false for child device as has_conns_grp is set
to true in coresight_create_conns_sysfs_group. The probe of parent
device will fail at this condition. Add has_conns_grp check for
child device before make the links and make the process from
device_register to connection_create be atomic to avoid this
probe failure issue.
Cc: stable@vger.kernel.org
Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Suggested-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
Link: https://lore.kernel.org/r/20220309142206.15632-1-quic_jinlmao@quicinc.com
[ Added Cc stable ]
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
This is a no-op change for style and consistency and has no effect on
the binary output by the compiler. In sysreg.h fields are defined as
the register name followed by the field name and then _MASK. This
allows for grepping for fields by name rather than using magic numbers.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Link: https://lore.kernel.org/r/20220304171913.2292458-16-james.clark@arm.com
/* Removed extra new lines */
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
This is a no-op change for style and consistency and has no effect on
the binary output by the compiler. In sysreg.h fields are defined as
the register name followed by the field name and then _MASK. This
allows for grepping for fields by name rather than using magic numbers.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Link: https://lore.kernel.org/r/20220304171913.2292458-15-james.clark@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
This is a no-op change for style and consistency and has no effect on
the binary output by the compiler. In sysreg.h fields are defined as
the register name followed by the field name and then _MASK. This
allows for grepping for fields by name rather than using magic numbers.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Link: https://lore.kernel.org/r/20220304171913.2292458-14-james.clark@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
This is a no-op change for style and consistency and has no effect on
the binary output by the compiler. In sysreg.h fields are defined as
the register name followed by the field name and then _MASK. This
allows for grepping for fields by name rather than using magic numbers.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Link: https://lore.kernel.org/r/20220304171913.2292458-13-james.clark@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
This is a no-op change for style and consistency and has no effect on
the binary output by the compiler. In sysreg.h fields are defined as
the register name followed by the field name and then _MASK. This
allows for grepping for fields by name rather than using magic numbers.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Link: https://lore.kernel.org/r/20220304171913.2292458-12-james.clark@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
This is a no-op change for style and consistency and has no effect on
the binary output by the compiler. These fields already have macros
to define them so use them instead of magic numbers.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Link: https://lore.kernel.org/r/20220304171913.2292458-11-james.clark@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
This is a no-op change for style and consistency and has no effect on
the binary output by the compiler. In sysreg.h fields are defined as
the register name followed by the field name and then _MASK. This
allows for grepping for fields by name rather than using magic numbers.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Link: https://lore.kernel.org/r/20220304171913.2292458-10-james.clark@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
This is a no-op change for style and consistency and has no effect on
the binary output by the compiler. In sysreg.h fields are defined as
the register name followed by the field name and then _MASK. This
allows for grepping for fields by name rather than using magic numbers.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Link: https://lore.kernel.org/r/20220304171913.2292458-9-james.clark@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
This is a no-op change for style and consistency and has no effect on
the binary output by the compiler. In sysreg.h fields are defined as
the register name followed by the field name and then _MASK. This
allows for grepping for fields by name rather than using magic numbers.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Link: https://lore.kernel.org/r/20220304171913.2292458-8-james.clark@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
This is a no-op change for style and consistency and has no effect on
the binary output by the compiler. In sysreg.h fields are defined as
the register name followed by the field name and then _MASK. This
allows for grepping for fields by name rather than using magic numbers.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Link: https://lore.kernel.org/r/20220304171913.2292458-7-james.clark@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
This is a no-op change for style and consistency and has no effect on
the binary output by the compiler. In sysreg.h fields are defined as
the register name followed by the field name and then _MASK. This
allows for grepping for fields by name rather than using magic numbers.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Link: https://lore.kernel.org/r/20220304171913.2292458-6-james.clark@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
This is a no-op change for style and consistency and has no effect on
the binary output by the compiler. In sysreg.h fields are defined as
the register name followed by the field name and then _MASK. This
allows for grepping for fields by name rather than using magic numbers.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Link: https://lore.kernel.org/r/20220304171913.2292458-5-james.clark@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
This is a no-op change for style and consistency and has no effect on
the binary output by the compiler. In sysreg.h fields are defined as
the register name followed by the field name and then _MASK. This
allows for grepping for fields by name rather than using magic numbers.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Link: https://lore.kernel.org/r/20220304171913.2292458-4-james.clark@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Jilin Yuan
Mike Leach
Yang Shen
Tamas Zsoldos
James Clark
Greg Kroah-Hartman
Sudeep Holla
Linus Torvalds
Nathan Chancellor
Stephen Rothwell
Yicong Yang
German Gomez
Randy Dunlap
Nick Desaulniers
Alexander Shishkin
Jiasheng Jiang
Christophe JAILLET
Suzuki K Poulose
Sai Prakash Ranjan
Guilherme G. Piccoli
Mao Jinlong