Граф коммитов

51 Коммитов

Автор SHA1 Сообщение Дата
Guennadi Liakhovetski b857df1acc ARM: 5944/1: scsi: fix timer setup in fas216.c
mod_timer() takes an absolute time and not a delay as its argument.

Cc: <stable@kernel.org>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-18 17:24:21 +00:00
Russell King 9759d22c83 Merge branch 'master' into devel
Conflicts:
	arch/arm/include/asm/elf.h
	arch/arm/kernel/module.c
2009-03-28 20:30:18 +00:00
Alan Cox ecbf61e735 [ARM] cumana: Fix a long standing bogon
Should be using strncmp as the data from user space may be unterminated

(Bug #8004)

Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-03-24 22:52:27 +00:00
Russell King 5369bea7d7 [ARM] dma: Use sensible DMA parameters for Acorn drivers
The hardware supports transfers up to a page boundary per buffer.
Currently, we work around that in the DMA code by splitting each
buffer up as we run through the scatterlist.  Avoid this by telling
the block layers about the hardware restriction.

Eventually, this will allow us to phase out the splitting code,
but not until the old IDE layer allows us to control the value it
gives to blk_queue_segment_boundary().

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-11 16:37:06 +00:00
Russell King a09e64fbc0 [ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach
This just leaves include/asm-arm/plat-* to deal with.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07 09:55:48 +01:00
Russell King be50972935 [ARM] Remove asm/hardware.h, use asm/arch/hardware.h instead
Remove includes of asm/hardware.h in addition to asm/arch/hardware.h.
Then, since asm/hardware.h only exists to include asm/arch/hardware.h,
update everything to directly include asm/arch/hardware.h and remove
asm/hardware.h.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07 09:40:08 +01:00
Harvey Harrison cadbd4a5e3 [SCSI] replace __FUNCTION__ with __func__
[jejb: fixed up a ton of missed conversions.

 All of you are on notice this has happened, driver trees will now
 need to be rebased]

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: SCSI List <linux-scsi@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-27 10:31:49 -04:00
Russell King e95a1b656a [ARM] rpc: acornscsi: update to new style ecard driver
Update acornscsi as per all the other ecard drivers to use MMIO
accessors rather than the obsolete 'pc io' style inb/outb accessors.

Use ecard_request_resources()/ecard_release_resources() for easier
resource handling, rather than requesting 5 separate regions
individually.

Acked-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-03 14:25:57 +01:00
Russell King a796ef7035 [ARM] rpc: acornscsi: stop using private __stringify()
The kernel has its own, so let's use that instead.

Acked-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-03 14:25:57 +01:00
Russell King ffd7858dd8 [ARM] rpc: acornscsi: convert hardware accessors to take 'AS_Host *'
Acked-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-03 14:25:57 +01:00
Russell King 324b9337f2 [ARM] rpc: acornscsi: fixup abort/reset methods, fix build errors
Revive the AcornSCSI driver, update it for the replacement command
abort and host reset methods, and fix the build errors in
acornscsi-io.S.

Acked-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-03 14:25:56 +01:00
Russell King d8f8eb43e9 [ARM] rpc: acornscsi: remove unused 'ADDR' macro
Acked-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-03 14:25:56 +01:00
Andi Kleen 9924a781f3 [SCSI] Remove random noop unchecked_isa_dma users
Lots of drivers set it to 0. Remove that. Patch should be a nop.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:15:40 -05:00
James Bottomley 0e935c9eba [SCSI] fas216: fix up the previous fas216 commit
Apparently the fix to [SCSI] fas216: Use scsi_eh API for REQUEST_SENSE
invocation didn't show up in the final version sent to linus.

Correct this omission.

Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-18 08:57:16 -06:00
Boaz Harrosh ccf9ea91ab [SCSI] fas216: Use scsi_eh API for REQUEST_SENSE invocation
Use new scsi_eh_prep/restor_cmnd() for synchronous REQUEST_SENSE
invocation.  This also converts the driver to the new accessor based
scatterlist implementation.

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-11 12:43:12 -06:00
Boaz Harrosh 84ac86ca8c [SCSI] arm: convert to accessors and !use_sg cleanup
- convert to accessors and !use_sg cleanup

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Tested-by: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:34 -06:00
Russell King 01c0ad5854 [ARM] Fix an rpc_defconfig regression
Fix:

  CC      drivers/scsi/arm/powertec.o
In file included from drivers/scsi/arm/powertec.c:29:
drivers/scsi/arm/scsi.h: In function 'next_SCp':
drivers/scsi/arm/scsi.h:42: error: 'struct scatterlist' has no member named 'page'
drivers/scsi/arm/scsi.h: In function 'init_SCp':
drivers/scsi/arm/scsi.h:80: error: 'struct scatterlist' has no member named 'page'

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-31 15:21:35 +00:00
Adrian Bunk 99eb8a550d Remove the arm26 port
The arm26 port has been in a state where it was far from even compiling
for quite some time.

Ian Molton agreed with the removal.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Ian Molton <spyro@f2s.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31 15:39:39 -07:00
Russell King 8b801ead3d [ARM] rpc: update Acorn SCSI drivers to modern ecard interfaces
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-20 21:29:33 +01:00
Russell King 10bdaaa0fa [ARM] ecard: add ecardm_iomap() / ecardm_iounmap()
Add devres ecardm_iomap() and ecardm_iounmap() for Acorn expansion
cards.  Convert all expansion card drivers to use them.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-11 17:19:02 +01:00
Russell King c7b87f3d50 [ARM] ecard: add helper function for setting ecard irq ops
Rather than having every driver fiddle about setting its private
IRQ operations and data, provide a helper function to contain
this functionality in one place.

Arrange to remove the driver-private IRQ operations and data when
the device is removed from the driver, and remove the driver
private code to do this.

This fixes potential problems caused by drivers forgetting to
remove these hooks.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-11 17:18:55 +01:00
Russell King 23d046f43a [ARM] ARM SCSI: Don't try to dma_map_sg too many scatterlist entries
An off-by-one bug meant we were always trying to map one too many
scatterlist entries.  This was mostly harmless prior to the checks
going in to consistent_sync(), but now causes the kernel to BUG.

Also, powertec.c was missing an assignment to info->ec.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-03-04 20:33:31 +00:00
Russell King 6b4df7ee1f [ARM] ARM FAS216: don't modify scsi_cmnd request_bufflen
SCSI doesn't want drivers to modify request_bufflen, so keep a
driver-private copy of this in the scsi_pointer structure instead.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-03-04 20:33:20 +00:00
Tobias Klauser c5a69d57eb Storage class should be before const qualifier
The C99 specification states in section 6.11.5:

The placement of a storage-class specifier other than at the
beginning of the declaration specifiers in a declaration is an
obsolescent feature.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-02-17 20:11:19 +01:00
Tim Schmielau cd354f1ae7 [PATCH] remove many unneeded #includes of sched.h
After Al Viro (finally) succeeded in removing the sched.h #include in module.h
recently, it makes sense again to remove other superfluous sched.h includes.
There are quite a lot of files which include it but don't actually need
anything defined in there.  Presumably these includes were once needed for
macros that used to live in sched.h, but moved to other header files in the
course of cleaning it up.

To ease the pain, this time I did not fiddle with any header files and only
removed #includes from .c-files, which tend to cause less trouble.

Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha,
arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig,
allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all
configs in arch/arm/configs on arm.  I also checked that no new warnings were
introduced by the patch (actually, some warnings are removed that were emitted
by unnecessarily included header files).

Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:54 -08:00
David Howells 7d12e780e0 IRQ: Maintain regs pointer globally rather than passing to IRQ handlers
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.

The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around.  On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).

Where appropriate, an arch may override the generic storage facility and do
something different with the variable.  On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.

Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions.  Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller.  A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.

I've build this code with allyesconfig for x86_64 and i386.  I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.

This will affect all archs.  Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

	struct pt_regs *old_regs = set_irq_regs(regs);

And put the old one back at the end:

	set_irq_regs(old_regs);

Don't pass regs through to generic_handle_irq() or __do_IRQ().

In timer_interrupt(), this sort of change will be necessary:

	-	update_process_times(user_mode(regs));
	-	profile_tick(CPU_PROFILING, regs);
	+	update_process_times(user_mode(get_irq_regs()));
	+	profile_tick(CPU_PROFILING);

I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().

Some notes on the interrupt handling in the drivers:

 (*) input_dev() is now gone entirely.  The regs pointer is no longer stored in
     the input_dev struct.

 (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking.  It does
     something different depending on whether it's been supplied with a regs
     pointer or not.

 (*) Various IRQ handler function pointers have been moved to type
     irq_handler_t.

Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 15:10:12 +01:00
Linus Torvalds 97d41e90fe Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (54 commits)
  [SCSI] Initial Commit of qla4xxx
  [SCSI] raid class: handle component-add errors
  [SCSI] SCSI megaraid_sas: handle thrown errors
  [SCSI] SCSI aic94xx: handle sysfs errors
  [SCSI] SCSI st: fix error handling in module init, sysfs
  [SCSI] SCSI sd: fix module init/exit error handling
  [SCSI] SCSI osst: add error handling to module init, sysfs
  [SCSI] scsi: remove hosts.h
  [SCSI] scsi: Scsi_Cmnd convertion in aic7xxx_old.c
  [SCSI] megaraid_sas: sets ioctl timeout and updates version,changelog
  [SCSI] megaraid_sas: adds tasklet for cmd completion
  [SCSI] megaraid_sas: prints pending cmds before setting hw_crit_error
  [SCSI] megaraid_sas: function pointer for disable interrupt
  [SCSI] megaraid_sas: frame count optimization
  [SCSI] megaraid_sas: FW transition and q size changes
  [SCSI] qla2xxx: Update version number to 8.01.07-k2.
  [SCSI] qla2xxx: Stall mid-layer error handlers while rport is blocked.
  [SCSI] qla2xxx: Add MODULE_FIRMWARE tags.
  [SCSI] qla2xxx: Add support for host port state FC transport attribute.
  [SCSI] qla2xxx: Add support for fabric name FC transport attribute.
  ...
2006-10-04 18:57:35 -07:00
Henne ee0ca6bab3 [SCSI] scsi: Scsi_Cmnd convertion in arm subtree
Changes the obsolete Scsi_Cmnd to struct scsi_cmnd in the arm subdir
of the scsi-subsys.

Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de>
Acked-by: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-03 17:28:33 -05:00
Uwe Zeisberger f30c226954 fix file specification in comments
Many files include the filename at the beginning, serveral used a wrong one.

Signed-off-by: Uwe Zeisberger <Uwe_Zeisberger@digi.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-03 23:01:26 +02:00
Russell King 574dc0abab [ARM] Fix Acorn platform SCSI driver build failures
SCSI folk forgot to fix up all the uses of 'buffer' before deleting
this struct member.  Do it for them to rescue the resulting build
failures.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-08-06 20:55:33 +01:00
Russell King ca8c100a00 [ARM] Fix NCR5380-based SCSI card build
The NCR5380-based SCSI cards need the SCSI SPI transport selected
to build correctly.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-08-06 20:53:40 +01:00
Christoph Hellwig 64821324ca [PATCH] fix compile regression for a few scsi drivers
This fixes three drivers to compile again after my patch that removes
the data_cmnd member from struct scsi_cmnd.

The fas216 change is trivial, it should have been using ->cmnd all the
time.

NCR53C9 (which seem to be mostly duplicate driver with esp.c!) is doing
something odd, it should only have looked at ->cmnd before not the saved
copy that is kept for the error handlers sake.  Note that it really
should deal with the sync setting themselves but use the generic domain
validation code that get this right - but that's for later let's push
this simple compile fix for now.

And sorry for the late fix for this, I have been busy with OLS and
associated activities last week.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-26 07:30:45 -07:00
Thomas Gleixner 1d6f359a2e [PATCH] irq-flags: scsi: Use the new IRQF_ constants
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02 13:58:53 -07:00
Jörn Engel 6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Eric Sesterhenn 125e18745f [PATCH] More BUG_ON conversion
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:43:08 -07:00
Rusty Russell 8d3b33f67f [PATCH] Remove MODULE_PARM
MODULE_PARM was actually breaking: recent gcc version optimize them out as
unused.  It's time to replace the last users, which are generally in the
most unloved drivers anyway.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25 08:22:52 -08:00
Russell King e9368f8288 [ARM] Remove asm/irq.h includes from ARM drivers
Many ARM drivers do not need to include asm/irq.h - remove this
unnecessary include from some ARM drivers.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-09 13:56:42 +00:00
Matthew Wilcox 1abfd37013 [SCSI] Rename scsi_print_msg to spi_print_msg
Rename scsi_print_msg to spi_print_msg and move its prototype from
scsi_dbg.h to scsi_transport_spi.h

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-15 18:41:27 -08:00
Matthew Wilcox 410ca5c7c6 [SCSI] Move scsi_print_msg to SPI class
scsi_print_msg() is an SPI-specific concept.  This patch moves it from
constants.c to scsi_transport_spi.c and updates the Kconfig to link in
the SPI class for the drivers which use scsi_print_msg().

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-15 18:41:13 -08:00
Christoph Hellwig f64a181d89 [SCSI] remove Scsi_Device typedef
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-09 15:48:20 -05:00
Christoph Hellwig 0a04137e75 [SCSI] remove Scsi_Pointer typedef
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-09 15:46:55 -05:00
Christoph Hellwig d0be4a7d29 [SCSI] remove Scsi_Host_Template typedef
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-09 15:44:09 -05:00
Jesper Juhl c9475cb0c3 [PATCH] kfree cleanup: drivers/scsi
This is the drivers/scsi/ part of the big kfree cleanup patch.

Remove pointless checks for NULL prior to calling kfree() in drivers/scsi/.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Acked-by: Kai Makisara <kai.makisara@kolumbus.fi>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:54:01 -08:00
David Hardeman 378f058cc4 [PATCH] Use sg_set_buf/sg_init_one where applicable
This patch uses sg_set_buf/sg_init_one in some places where it was
duplicated.

Signed-off-by: David Hardeman <david@2gen.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Greg KH <greg@kroah.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2005-10-30 11:19:43 +11:00
Al Viro a838e543db [PATCH] Kconfig fix (acornscsi)
acornscsi had been broken for a long time; marked as such

Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-23 18:43:42 -07:00
Yani Ioannou 10523b3b82 [PATCH] Driver Core: drivers/s390/net/qeth_sys.c - drivers/usb/gadget/pxa2xx_udc.c: update device attribute callbacks
Signed-off-by: Yani Ioannou <yani.ioannou@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:35 -07:00
Jeff Garzik df0ae2497d [SCSI] allow sleeping in ->eh_host_reset_handler()
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-17 12:05:18 -05:00
Jeff Garzik 3471c28803 [SCSI] Remove no-op implementations of SCSI EH hooks
Drivers need not implement a hook that returns FAILED, and does nothing
else, since the SCSI midlayer code will do that for us.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-17 12:04:45 -05:00
be7db055dd [PATCH] remove old scsi data direction macros
these have been wrappers for the generic dma direction bits since 2.5.x.
This patch converts the few remaining drivers and removes the macros.

Arjan noticed there's some hunk in here that shouldn't.  Updated patch
below:

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-04-18 13:49:58 -05:00
db9dff366b [PATCH] remove outdated print_* functions
We have the scsi_print_* functions in the proper namespace for a long
time now and there weren't a lot users left.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-04-18 12:32:20 -05:00