Граф коммитов

1104 Коммитов

Автор SHA1 Сообщение Дата
Linus Torvalds 531e93d114 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from David Miller:
 "I was battling a cold after some recent trips, so quite a bit piled up
  meanwhile, sorry about that.

  Highlights:

   1) Fix fd leak in various bpf selftests, from Brian Vazquez.

   2) Fix crash in xsk when device doesn't support some methods, from
      Magnus Karlsson.

   3) Fix various leaks and use-after-free in rxrpc, from David Howells.

   4) Fix several SKB leaks due to confusion of who owns an SKB and who
      should release it in the llc code. From Eric Biggers.

   5) Kill a bunc of KCSAN warnings in TCP, from Eric Dumazet.

   6) Jumbo packets don't work after resume on r8169, as the BIOS resets
      the chip into non-jumbo mode during suspend. From Heiner Kallweit.

   7) Corrupt L2 header during MPLS push, from Davide Caratti.

   8) Prevent possible infinite loop in tc_ctl_action, from Eric
      Dumazet.

   9) Get register bits right in bcmgenet driver, based upon chip
      version. From Florian Fainelli.

  10) Fix mutex problems in microchip DSA driver, from Marek Vasut.

  11) Cure race between route lookup and invalidation in ipv4, from Wei
      Wang.

  12) Fix performance regression due to false sharing in 'net'
      structure, from Eric Dumazet"

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (145 commits)
  net: reorder 'struct net' fields to avoid false sharing
  net: dsa: fix switch tree list
  net: ethernet: dwmac-sun8i: show message only when switching to promisc
  net: aquantia: add an error handling in aq_nic_set_multicast_list
  net: netem: correct the parent's backlog when corrupted packet was dropped
  net: netem: fix error path for corrupted GSO frames
  macb: propagate errors when getting optional clocks
  xen/netback: fix error path of xenvif_connect_data()
  net: hns3: fix mis-counting IRQ vector numbers issue
  net: usb: lan78xx: Connect PHY before registering MAC
  vsock/virtio: discard packets if credit is not respected
  vsock/virtio: send a credit update when buffer size is changed
  mlxsw: spectrum_trap: Push Ethernet header before reporting trap
  net: ensure correct skb->tstamp in various fragmenters
  net: bcmgenet: reset 40nm EPHY on energy detect
  net: bcmgenet: soft reset 40nm EPHYs before MAC init
  net: phy: bcm7xxx: define soft_reset for 40nm EPHY
  net: bcmgenet: don't set phydev->link from MAC
  net: Update address for MediaTek ethernet driver in MAINTAINERS
  ipv4: fix race condition between route lookup and invalidation
  ...
2019-10-19 17:09:11 -04:00
Ingo Molnar a4cf7b392e perf/urgent fixes:
perf script:
 
   Andi Kleen:
 
     - Fix recovery from LBR/binary mismatch in the "brstackinsn" --field.
 
 perf annotate:
 
   Arnaldo Carvalho de Melo:
 
   - Propagate errors so that meaningful messages can be presented to the
     user in case of problems.
 
 perf map:
 
   Steve MacLean:
 
   - Fix handling of maps partially overlapped, resolving symbols in the
     ranges not replaced by new mmaps.
 
 perf tests:
 
   Ian Rogers:
 
   - Use raise() instead of NULL derefs to avoid causing a SIGILL rather than a
     SIGSEGV for optimized builds that turn NULL derefs into ud2 instructions.
 
 perf LLVM:
 
   Ian Rogers:
 
   - Don't access out-of-scope array.
 
 perf inject:
 
   Steve MacLean:
 
   - Fix JIT_CODE_MOVE filename, that was having a u64 truncaded into a 32-bit
     snprintf format and also a missing ".so" suffix in another case.
 
 libsubcmd:
 
   Ian Rogers:
 
   - Make _FORTIFY_SOURCE defines dependent on the feature, avoiding
     false positives with with memory sanitizers such as LLVM's ASan.
 
 Vendor specific events:
 
 Intel:
 
   Andi Kleen:
 
   - Fix period for Intel fixed counters.
 
 s390:
 
   Thomas Richter (2):
 
   - Fix some event details transaction for machine type 8561.
 
 tools headers UAPI:
 
   Arnaldo Carvalho de Melo:
 
   - Sync headers with the kernel, catching new usbdevfs ioctls and
     madvise behaviours to properly decode in 'perf trace' output.
 
 Documentation:
 
   Steve MacLean:
 
   - Correct and clarify jitdump spec.
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCXZMyWQAKCRCyPKLppCJ+
 Jz0qAQC9lZQrWR+Q5S1rXbp5x45+mIji7Q8UK5pyzhpLRAOYNwD/cR6v6TCE96lE
 a2hCqV+gV+pbc70Bw5H7TN+kVOtGaQE=
 =wcfs
 -----END PGP SIGNATURE-----

Merge tag 'perf-urgent-for-mingo-5.4-20191001' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf/urgent fixes from Arnaldo Carvalho de Melo:

perf script:

  Andi Kleen:

    - Fix recovery from LBR/binary mismatch in the "brstackinsn" --field.

perf annotate:

  Arnaldo Carvalho de Melo:

  - Propagate errors so that meaningful messages can be presented to the
    user in case of problems.

perf map:

  Steve MacLean:

  - Fix handling of maps partially overlapped, resolving symbols in the
    ranges not replaced by new mmaps.

perf tests:

  Ian Rogers:

  - Use raise() instead of NULL derefs to avoid causing a SIGILL rather than a
    SIGSEGV for optimized builds that turn NULL derefs into ud2 instructions.

perf LLVM:

  Ian Rogers:

  - Don't access out-of-scope array.

perf inject:

  Steve MacLean:

  - Fix JIT_CODE_MOVE filename, that was having a u64 truncaded into a 32-bit
    snprintf format and also a missing ".so" suffix in another case.

libsubcmd:

  Ian Rogers:

  - Make _FORTIFY_SOURCE defines dependent on the feature, avoiding
    false positives with with memory sanitizers such as LLVM's ASan.

Vendor specific events:

Intel:

  Andi Kleen:

  - Fix period for Intel fixed counters.

s390:

  Thomas Richter (2):

  - Fix some event details transaction for machine type 8561.

tools headers UAPI:

  Arnaldo Carvalho de Melo:

  - Sync headers with the kernel, catching new usbdevfs ioctls and
    madvise behaviours to properly decode in 'perf trace' output.

Documentation:

  Steve MacLean:

  - Correct and clarify jitdump spec.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-10-07 15:15:24 +02:00
Yonghong Song 1bd6352459 libbpf: handle symbol versioning properly for libbpf.a
bcc uses libbpf repo as a submodule. It brings in libbpf source
code and builds everything together to produce shared libraries.
With latest libbpf, I got the following errors:
  /bin/ld: libbcc_bpf.so.0.10.0: version node not found for symbol xsk_umem__create@LIBBPF_0.0.2
  /bin/ld: failed to set dynamic section sizes: Bad value
  collect2: error: ld returned 1 exit status
  make[2]: *** [src/cc/libbcc_bpf.so.0.10.0] Error 1

In xsk.c, we have
  asm(".symver xsk_umem__create_v0_0_2, xsk_umem__create@LIBBPF_0.0.2");
  asm(".symver xsk_umem__create_v0_0_4, xsk_umem__create@@LIBBPF_0.0.4");
The linker thinks the built is for LIBBPF but cannot find proper version
LIBBPF_0.0.2/4, so emit errors.

I also confirmed that using libbpf.a to produce a shared library also
has issues:
  -bash-4.4$ cat t.c
  extern void *xsk_umem__create;
  void * test() { return xsk_umem__create; }
  -bash-4.4$ gcc -c -fPIC t.c
  -bash-4.4$ gcc -shared t.o libbpf.a -o t.so
  /bin/ld: t.so: version node not found for symbol xsk_umem__create@LIBBPF_0.0.2
  /bin/ld: failed to set dynamic section sizes: Bad value
  collect2: error: ld returned 1 exit status
  -bash-4.4$

Symbol versioning does happens in commonly used libraries, e.g., elfutils
and glibc. For static libraries, for a versioned symbol, the old definitions
will be ignored, and the symbol will be an alias to the latest definition.
For example, glibc sched_setaffinity is versioned.
  -bash-4.4$ readelf -s /usr/lib64/libc.so.6 | grep sched_setaffinity
     756: 000000000013d3d0    13 FUNC    GLOBAL DEFAULT   13 sched_setaffinity@GLIBC_2.3.3
     757: 00000000000e2e70   455 FUNC    GLOBAL DEFAULT   13 sched_setaffinity@@GLIBC_2.3.4
    1800: 0000000000000000     0 FILE    LOCAL  DEFAULT  ABS sched_setaffinity.c
    4228: 00000000000e2e70   455 FUNC    LOCAL  DEFAULT   13 __sched_setaffinity_new
    4648: 000000000013d3d0    13 FUNC    LOCAL  DEFAULT   13 __sched_setaffinity_old
    7338: 000000000013d3d0    13 FUNC    GLOBAL DEFAULT   13 sched_setaffinity@GLIBC_2
    7380: 00000000000e2e70   455 FUNC    GLOBAL DEFAULT   13 sched_setaffinity@@GLIBC_
  -bash-4.4$
For static library, the definition of sched_setaffinity aliases to the new definition.
  -bash-4.4$ readelf -s /usr/lib64/libc.a | grep sched_setaffinity
  File: /usr/lib64/libc.a(sched_setaffinity.o)
     8: 0000000000000000   455 FUNC    GLOBAL DEFAULT    1 __sched_setaffinity_new
    12: 0000000000000000   455 FUNC    WEAK   DEFAULT    1 sched_setaffinity

For both elfutils and glibc, additional macros are used to control different handling
of symbol versioning w.r.t static and shared libraries.
For elfutils, the macro is SYMBOL_VERSIONING
(https://sourceware.org/git/?p=elfutils.git;a=blob;f=lib/eu-config.h).
For glibc, the macro is SHARED
(https://sourceware.org/git/?p=glibc.git;a=blob;f=include/shlib-compat.h;hb=refs/heads/master)

This patch used SHARED as the macro name. After this patch, the libbpf.a has
  -bash-4.4$ readelf -s libbpf.a | grep xsk_umem__create
     372: 0000000000017145  1190 FUNC    GLOBAL DEFAULT    1 xsk_umem__create_v0_0_4
     405: 0000000000017145  1190 FUNC    GLOBAL DEFAULT    1 xsk_umem__create
     499: 00000000000175eb   103 FUNC    GLOBAL DEFAULT    1 xsk_umem__create_v0_0_2
  -bash-4.4$
No versioned symbols for xsk_umem__create.
The libbpf.a can be used to build a shared library succesfully.
  -bash-4.4$ cat t.c
  extern void *xsk_umem__create;
  void * test() { return xsk_umem__create; }
  -bash-4.4$ gcc -c -fPIC t.c
  -bash-4.4$ gcc -shared t.o libbpf.a -o t.so
  -bash-4.4$

Fixes: 10d30e3017 ("libbpf: add flags to umem config")
Cc: Kevin Laatz <kevin.laatz@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-09-30 15:19:45 -07:00
Shuah Khan 55d554f5d1 tools: bpf: Use !building_out_of_srctree to determine srctree
make TARGETS=bpf kselftest fails with:

Makefile:127: tools/build/Makefile.include: No such file or directory

When the bpf tool make is invoked from tools Makefile, srctree is
cleared and the current logic check for srctree equals to empty
string to determine srctree location from CURDIR.

When the build in invoked from selftests/bpf Makefile, the srctree
is set to "." and the same logic used for srctree equals to empty is
needed to determine srctree.

Check building_out_of_srctree undefined as the condition for both
cases to fix "make TARGETS=bpf kselftest" build failure.

Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20190927011344.4695-1-skhan@linuxfoundation.org
2019-09-30 10:53:34 +02:00
Linus Torvalds 02dc96ef6c Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from David Miller:

 1) Sanity check URB networking device parameters to avoid divide by
    zero, from Oliver Neukum.

 2) Disable global multicast filter in NCSI, otherwise LLDP and IPV6
    don't work properly. Longer term this needs a better fix tho. From
    Vijay Khemka.

 3) Small fixes to selftests (use ping when ping6 is not present, etc.)
    from David Ahern.

 4) Bring back rt_uses_gateway member of struct rtable, it's semantics
    were not well understood and trying to remove it broke things. From
    David Ahern.

 5) Move usbnet snaity checking, ignore endpoints with invalid
    wMaxPacketSize. From Bjørn Mork.

 6) Missing Kconfig deps for sja1105 driver, from Mao Wenan.

 7) Various small fixes to the mlx5 DR steering code, from Alaa Hleihel,
    Alex Vesker, and Yevgeny Kliteynik

 8) Missing CAP_NET_RAW checks in various places, from Ori Nimron.

 9) Fix crash when removing sch_cbs entry while offloading is enabled,
    from Vinicius Costa Gomes.

10) Signedness bug fixes, generally in looking at the result given by
    of_get_phy_mode() and friends. From Dan Crapenter.

11) Disable preemption around BPF_PROG_RUN() calls, from Eric Dumazet.

12) Don't create VRF ipv6 rules if ipv6 is disabled, from David Ahern.

13) Fix quantization code in tcp_bbr, from Kevin Yang.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (127 commits)
  net: tap: clean up an indentation issue
  nfp: abm: fix memory leak in nfp_abm_u32_knode_replace
  tcp: better handle TCP_USER_TIMEOUT in SYN_SENT state
  sk_buff: drop all skb extensions on free and skb scrubbing
  tcp_bbr: fix quantization code to not raise cwnd if not probing bandwidth
  mlxsw: spectrum_flower: Fail in case user specifies multiple mirror actions
  Documentation: Clarify trap's description
  mlxsw: spectrum: Clear VLAN filters during port initialization
  net: ena: clean up indentation issue
  NFC: st95hf: clean up indentation issue
  net: phy: micrel: add Asym Pause workaround for KSZ9021
  net: socionext: ave: Avoid using netdev_err() before calling register_netdev()
  ptp: correctly disable flags on old ioctls
  lib: dimlib: fix help text typos
  net: dsa: microchip: Always set regmap stride to 1
  nfp: flower: fix memory leak in nfp_flower_spawn_vnic_reprs
  nfp: flower: prevent memory leak in nfp_flower_spawn_phy_reprs
  net/sched: Set default of CONFIG_NET_TC_SKB_EXT to N
  vrf: Do not attempt to create IPv6 mcast rule if IPv6 is disabled
  net: sched: sch_sfb: don't call qdisc_put() while holding tree lock
  ...
2019-09-28 17:47:33 -07:00
Ian Rogers 4b0b2b096d libsubcmd: Make _FORTIFY_SOURCE defines dependent on the feature
Unconditionally defining _FORTIFY_SOURCE can break tools that don't work
with it, such as memory sanitizers:

  https://github.com/google/sanitizers/wiki/AddressSanitizer#faq

Fixes: 4b6ab94eab ("perf subcmd: Create subcmd library")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20190925195924.152834-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-09-27 09:26:14 -03:00
Linus Torvalds a7b7b772bb Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull more perf updates from Ingo Molnar:
 "The only kernel change is comment typo fixes.

  The rest is mostly tooling fixes, but also new vendor event additions
  and updates, a bigger libperf/libtraceevent library and a header files
  reorganization that came in a bit late"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (108 commits)
  perf unwind: Fix libunwind build failure on i386 systems
  perf parser: Remove needless include directives
  perf build: Add detection of java-11-openjdk-devel package
  perf jvmti: Include JVMTI support for s390
  perf vendor events: Remove P8 HW events which are not supported
  perf evlist: Fix access of freed id arrays
  perf stat: Fix free memory access / memory leaks in metrics
  perf tools: Replace needless mmap.h with what is needed, event.h
  perf evsel: Move config terms to a separate header
  perf evlist: Remove unused perf_evlist__fprintf() method
  perf evsel: Introduce evsel_fprintf.h
  perf evsel: Remove need for symbol_conf in evsel_fprintf.c
  perf copyfile: Move copyfile routines to separate files
  libperf: Add perf_evlist__poll() function
  libperf: Add perf_evlist__add_pollfd() function
  libperf: Add perf_evlist__alloc_pollfd() function
  libperf: Add libperf_init() call to the tests
  libperf: Merge libperf_set_print() into libperf_init()
  libperf: Add libperf dependency for tests targets
  libperf: Use sys/types.h to get ssize_t, not unistd.h
  ...
2019-09-26 15:38:07 -07:00
Andrii Nakryiko 39529a9948 libbpf: Teach btf_dumper to emit stand-alone anonymous enum definitions
BTF-to-C converter previously skipped anonymous enums in an assumption
that those are embedded in struct's field definitions. This is not
always the case and a lot of kernel constants are defined as part of
anonymous enums. This change fixes the logic by eagerly marking all
types as either referenced by any other type or not. This is enough to
distinguish two classes of anonymous enums and emit previously omitted
enum definitions.

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20190925203745.3173184-1-andriin@fb.com
2019-09-26 14:38:29 +02:00
Michel Lespinasse c7d4f7eeb6 rbtree: avoid generating code twice for the cached versions (tools copy)
As was already noted in rbtree.h, the logic to cache rb_first (or
rb_last) can easily be implemented externally to the core rbtree api.

This commit takes the changes applied to the include/linux/ and lib/
rbtree files in 9f973cb380 ("lib/rbtree: avoid generating code twice
for the cached versions"), and applies these to the
tools/include/linux/ and tools/lib/ files as well to keep them
synchronized.

Link: http://lkml.kernel.org/r/20190703034812.53002-1-walken@google.com
Signed-off-by: Michel Lespinasse <walken@google.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-25 17:51:39 -07:00
Andrii Nakryiko aef70a1f44 libbpf: fix false uninitialized variable warning
Some compilers emit warning for potential uninitialized next_id usage.
The code is correct, but control flow is too complicated for some
compilers to figure this out. Re-initialize next_id to satisfy
compiler.

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-09-25 22:15:02 +02:00
Tzvetomir Stoyanov 33c96400dc libtraceevent: Man pages for tep plugins APIs
Create man pages for libtraceevent APIs:

  tep_load_plugins(),
  tep_unload_plugin()

Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lore.kernel.org/linux-trace-devel/20190903133434.30417-1-tz.stoyanov@gmail.com
Link: http://lore.kernel.org/lkml/20190919212542.216189588@goodmis.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-09-25 09:51:43 -03:00
Tzvetomir Stoyanov (VMware) 077faf3dc7 libtraceevent: Move traceevent plugins in its own subdirectory
All traceevent plugins code is moved to tools/lib/traceevent/plugins
subdirectory. It makes traceevent implementation in trace-cmd and in
kernel tree consistent. There is no changes in the way libtraceevent and
plugins are compiled and installed.

Committer notes:

Applied fixup provided by Steven, fixing the tools/perf/Makefile.perf
target for the plugin dynamic list file. Problem noticed when cross
building to aarch64 from a Ubuntu 19.04 container.

Suggested-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lore.kernel.org/lkml/20190923115929.453b68f1@oasis.local.home
Link: http://lore.kernel.org/lkml/20190919212542.377333393@goodmis.org
Link: http://lore.kernel.org/linux-trace-devel/20190917105055.18983-1-tz.stoyanov@gmail.com
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-09-25 09:51:43 -03:00
Tzvetomir Stoyanov (VMware) d69094f364 libtraceevent: Add tep_get_event() in event-parse.h
The tep_get_event() function is an official libtracevent API, described
in the library man pages. However, it cannot be used by the library users because
it is not declared in the event-parse.h file, where all libtracevent APIs are.
The function declaration is added in event-parse.h file.

Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lore.kernel.org/linux-trace-devel/20190808113721.13539-1-tz.stoyanov@gmail.com
Link: http://lore.kernel.org/lkml/20190919212542.058025937@goodmis.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-09-25 09:51:43 -03:00
Tzvetomir Stoyanov (VMware) f8d16387ff libtraceevent: Man pages fix, changes in event printing APIs
APIs for printing various trace event information were redesigned to be
more simple. However, the main libtraceevent man page was not updated
with those changes. The documentation is updated to describe the new
event print API.

Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lore.kernel.org/linux-trace-devel/20190808113636.13299-3-tz.stoyanov@gmail.com
Link: http://lore.kernel.org/lkml/20190919212541.869643036@goodmis.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-09-25 09:51:43 -03:00
Tzvetomir Stoyanov (VMware) 38f76c3136 libtraceevent: Man pages fix, rename tep_ref_get() to tep_get_ref()
The tep_ref_get() was renamed to tep_get_ref(), to be more consistent
with the other tep_ref_* APIs. However, in the man pages the API is
still with the old name. The documentation is fixed to reflect the
actual name of the API.

Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lore.kernel.org/linux-trace-devel/20190808113636.13299-2-tz.stoyanov@gmail.com
Link: http://lore.kernel.org/lkml/20190919212541.697034573@goodmis.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-09-25 09:51:43 -03:00
Tzvetomir Stoyanov 4ab91deacc libtraceevent: Man pages for libtraceevent event print related API
Added new man page, describing tep_print_event() libtraceevent API.

Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lore.kernel.org/linux-trace-devel/20190801075012.22098-1-tz.stoyanov@gmail.com
Link: http://lore.kernel.org/lkml/20190919212541.553160178@goodmis.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-09-25 09:51:43 -03:00
Steven Rostedt (VMware) 5c8da72dc2 libtraceevent: Round up in tep_print_event() time precision
When testing the output of the old trace-cmd compared to the one that
uses the updated tep_print_event() logic, it was different in that the
time stamp precision in the old format would round up to the nearest
precision, where as the new logic truncates. Bring back the old method
of rounding up.

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Cc: linux trace devel <linux-trace-devel@vger.kernel.org>
Link: http://lore.kernel.org/lkml/20190919165119.5efa5de6@gandalf.local.home
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-09-25 09:51:42 -03:00
Sakari Ailus b295c3e39c tools lib traceevent: Convert remaining %p[fF] users to %p[sS]
There are no in-kernel %p[fF] users left. Convert the traceevent tool,
too, to align with the kernel.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: devicetree@vger.kernel.org
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: linux-acpi@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Link: http://lore.kernel.org/lkml/20190918133419.7969-2-sakari.ailus@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-09-20 10:28:26 -03:00
Toke Høiland-Jørgensen e0973a421c libbpf: Remove getsockopt() check for XDP_OPTIONS
The xsk_socket__create() function fails and returns an error if it cannot
get the XDP_OPTIONS through getsockopt(). However, support for XDP_OPTIONS
was not added until kernel 5.3, so this means that creating XSK sockets
always fails on older kernels.

Since the option is just used to set the zero-copy flag in the xsk struct,
and that flag is not really used for anything yet, just remove the
getsockopt() call until a proper use for it is introduced.

Suggested-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-09-19 14:22:18 +02:00
Linus Torvalds 81160dda9a Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from David Miller:

 1) Support IPV6 RA Captive Portal Identifier, from Maciej Żenczykowski.

 2) Use bio_vec in the networking instead of custom skb_frag_t, from
    Matthew Wilcox.

 3) Make use of xmit_more in r8169 driver, from Heiner Kallweit.

 4) Add devmap_hash to xdp, from Toke Høiland-Jørgensen.

 5) Support all variants of 5750X bnxt_en chips, from Michael Chan.

 6) More RTNL avoidance work in the core and mlx5 driver, from Vlad
    Buslov.

 7) Add TCP syn cookies bpf helper, from Petar Penkov.

 8) Add 'nettest' to selftests and use it, from David Ahern.

 9) Add extack support to drop_monitor, add packet alert mode and
    support for HW drops, from Ido Schimmel.

10) Add VLAN offload to stmmac, from Jose Abreu.

11) Lots of devm_platform_ioremap_resource() conversions, from
    YueHaibing.

12) Add IONIC driver, from Shannon Nelson.

13) Several kTLS cleanups, from Jakub Kicinski.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1930 commits)
  mlxsw: spectrum_buffers: Add the ability to query the CPU port's shared buffer
  mlxsw: spectrum: Register CPU port with devlink
  mlxsw: spectrum_buffers: Prevent changing CPU port's configuration
  net: ena: fix incorrect update of intr_delay_resolution
  net: ena: fix retrieval of nonadaptive interrupt moderation intervals
  net: ena: fix update of interrupt moderation register
  net: ena: remove all old adaptive rx interrupt moderation code from ena_com
  net: ena: remove ena_restore_ethtool_params() and relevant fields
  net: ena: remove old adaptive interrupt moderation code from ena_netdev
  net: ena: remove code duplication in ena_com_update_nonadaptive_moderation_interval _*()
  net: ena: enable the interrupt_moderation in driver_supported_features
  net: ena: reimplement set/get_coalesce()
  net: ena: switch to dim algorithm for rx adaptive interrupt moderation
  net: ena: add intr_moder_rx_interval to struct ena_com_dev and use it
  net: phy: adin: implement Energy Detect Powerdown mode via phy-tunable
  ethtool: implement Energy Detect Powerdown support via phy-tunable
  xen-netfront: do not assume sk_buff_head list is empty in error handling
  s390/ctcm: Delete unnecessary checks before the macro call “dev_kfree_skb”
  net: ena: don't wake up tx queue when down
  drop_monitor: Better sanitize notified packets
  ...
2019-09-18 12:34:53 -07:00
David S. Miller 1e46c09ec1 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:

====================
The following pull-request contains BPF updates for your *net-next* tree.

The main changes are:

1) Add the ability to use unaligned chunks in the AF_XDP umem. By
   relaxing where the chunks can be placed, it allows to use an
   arbitrary buffer size and place whenever there is a free
   address in the umem. Helps more seamless DPDK AF_XDP driver
   integration. Support for i40e, ixgbe and mlx5e, from Kevin and
   Maxim.

2) Addition of a wakeup flag for AF_XDP tx and fill rings so the
   application can wake up the kernel for rx/tx processing which
   avoids busy-spinning of the latter, useful when app and driver
   is located on the same core. Support for i40e, ixgbe and mlx5e,
   from Magnus and Maxim.

3) bpftool fixes for printf()-like functions so compiler can actually
   enforce checks, bpftool build system improvements for custom output
   directories, and addition of 'bpftool map freeze' command, from Quentin.

4) Support attaching/detaching XDP programs from 'bpftool net' command,
   from Daniel.

5) Automatic xskmap cleanup when AF_XDP socket is released, and several
   barrier/{read,write}_once fixes in AF_XDP code, from Björn.

6) Relicense of bpf_helpers.h/bpf_endian.h for future libbpf
   inclusion as well as libbpf versioning improvements, from Andrii.

7) Several new BPF kselftests for verifier precision tracking, from Alexei.

8) Several BPF kselftest fixes wrt endianess to run on s390x, from Ilya.

9) And more BPF kselftest improvements all over the place, from Stanislav.

10) Add simple BPF map op cache for nfp driver to batch dumps, from Jakub.

11) AF_XDP socket umem mapping improvements for 32bit archs, from Ivan.

12) Add BPF-to-BPF call and BTF line info support for s390x JIT, from Yauheni.

13) Small optimization in arm64 JIT to spare 1 insns for BPF_MOD, from Jerin.

14) Fix an error check in bpf_tcp_gen_syncookie() helper, from Petar.

15) Various minor fixes and cleanups, from Nathan, Masahiro, Masanari,
    Peter, Wei, Yue.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-06 16:49:17 +02:00
Tzvetomir Stoyanov e97fd1383c libtraceevent: Change users plugin directory
To be compliant with XDG user directory layout, the user's plugin
directory is changed from ~/.traceevent/plugins to
~/.local/lib/traceevent/plugins/

Suggested-by: Patrick McLean <chutzpah@gentoo.org>
Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Patrick McLean <chutzpah@gentoo.org>
Cc: linux-trace-devel@vger.kernel.org
Link: https://lore.kernel.org/linux-trace-devel/20190313144206.41e75cf8@patrickm/
Link: http://lore.kernel.org/linux-trace-devel/20190801074959.22023-4-tz.stoyanov@gmail.com
Link: http://lore.kernel.org/lkml/20190805204355.344622683@goodmis.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-31 22:19:28 -03:00
Tzvetomir Stoyanov 5d6552ab3b libtraceevent: Remove tep_register_trace_clock()
The tep_register_trace_clock() API is used to instruct the traceevent
library how to print the event time stamps. As event print interface if
redesigned, this API is not needed any more.  The new event print API is
flexible and the user can specify how the time stamps are printed.

Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Patrick McLean <chutzpah@gentoo.org>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lore.kernel.org/linux-trace-devel/20190801074959.22023-3-tz.stoyanov@gmail.com
Link: http://lore.kernel.org/lkml/20190805204355.195042846@goodmis.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-31 22:19:28 -03:00
Tzvetomir Stoyanov 38847db974 libtraceevent, perf tools: Changes in tep_print_event_* APIs
Libtraceevent APIs for printing various trace events information are
complicated, there are complex extra parameters. To control the way
event information is printed, the user should call a set of functions in
a specific sequence.

These APIs are reimplemented to provide a more simple interface for
printing event information.

Removed APIs:

 	tep_print_event_task()
	tep_print_event_time()
	tep_print_event_data()
	tep_event_info()
	tep_is_latency_format()
	tep_set_latency_format()
	tep_data_latency_format()
	tep_set_print_raw()

A new API for printing event information is introduced:
   void tep_print_event(struct tep_handle *tep, struct trace_seq *s,
		        struct tep_record *record, const char *fmt, ...);
where "fmt" is a printf-like format string, followed by the event
fields to be printed. Supported fields:
 TEP_PRINT_PID, "%d" - event PID
 TEP_PRINT_CPU, "%d" - event CPU
 TEP_PRINT_COMM, "%s" - event command string
 TEP_PRINT_NAME, "%s" - event name
 TEP_PRINT_LATENCY, "%s" - event latency
 TEP_PRINT_TIME, %d - event time stamp. A divisor and precision
   can be specified as part of this format string:
   "%precision.divisord". Example:
   "%3.1000d" - divide the time by 1000 and print the first 3 digits
   before the dot. Thus, the time stamp "123456000" will be printed as
   "123.456"
 TEP_PRINT_INFO, "%s" - event information.
 TEP_PRINT_INFO_RAW, "%s" - event information, in raw format.

Example:
  tep_print_event(tep, s, record, "%16s-%-5d [%03d] %s %6.1000d %s %s",
		  TEP_PRINT_COMM, TEP_PRINT_PID, TEP_PRINT_CPU,
		  TEP_PRINT_LATENCY, TEP_PRINT_TIME, TEP_PRINT_NAME, TEP_PRINT_INFO);
Output:
	ls-11314 [005] d.h. 185207.366383 function __wake_up

Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linux-trace-devel@vger.kernel.org
Cc: Patrick McLean <chutzpah@gentoo.org>
Link: http://lore.kernel.org/linux-trace-devel/20190801074959.22023-2-tz.stoyanov@gmail.com
Link: http://lore.kernel.org/lkml/20190805204355.041132030@goodmis.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-31 22:19:28 -03:00
Kevin Laatz 10d30e3017 libbpf: add flags to umem config
This patch adds a 'flags' field to the umem_config and umem_reg structs.
This will allow for more options to be added for configuring umems.

The first use for the flags field is to add a flag for unaligned chunks
mode. These flags can either be user-provided or filled with a default.

Since we change the size of the xsk_umem_config struct, we need to version
the ABI. This patch includes the ABI versioning for xsk_umem__create. The
Makefile was also updated to handle multiple function versions in
check-abi.

Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-31 01:08:26 +02:00
Steven Rostedt (VMware) 301011ba62 tools lib traceevent: Remove unneeded qsort and uses memmove instead
While reading a trace data file that had 100,000s of tasks, the process
took an extremely long time. I profiled it down to add_new_comm(), which
was doing a qsort() call on an array that was pretty much already sorted
(all but the last element. qsort() isn't very efficient when dealing
with mostly sorted arrays, and this definitely showed its issues.

When adding a new task to the task list, instead of using qsort(), do
another bsearch() with a function that will find the element before
where the new task will be inserted in. Then simply shift the rest of
the array, and insert the task where it belongs.

Fixes: f7d82350e5 ("tools/events: Add files to create libtraceevent.a")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20190828191820.127233764@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-29 08:36:12 -03:00
Steven Rostedt (VMware) b0215e2d6a tools lib traceevent: Do not free tep->cmdlines in add_new_comm() on failure
If the re-allocation of tep->cmdlines succeeds, then the previous
allocation of tep->cmdlines will be freed. If we later fail in
add_new_comm(), we must not free cmdlines, and also should assign
tep->cmdlines to the new allocation. Otherwise when freeing tep, the
tep->cmdlines will be pointing to garbage.

Fixes: a6d2a61ac6 ("tools lib traceevent: Remove some die() calls")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linux-trace-devel@vger.kernel.org
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20190828191819.970121417@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-29 08:36:12 -03:00
Ingo Molnar 8db5957bc7 Linux 5.3-rc6
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl1i2wkeHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGcDQIAJINYON5WdDSFDpp
 htva213hSIxYLix8Dc4cTMk8qT/P2MAj9pPYERuLwIxWZlfbduW6Fxy8bJANZ7k3
 4cJ/IbmA5M5ZIaOJTTL45w8H0CMR/4mdPl5rb5k/Wkh449Cj101gZLlh0FEtR5zG
 uDJecKSuHjH1ikySk6+zmRG5X+lq6wNY8NkuBtfwAwLffFc0ljQHwPUMJ8ojgqt/
 p3ChNgtb/I6U6ExITlyktKdP59bAoHAoBiKKFZWw5yJWgXE2q4Sv9nT4Btkr5KdJ
 9mnWnSaSLwptNCOtU4tKLwFIZP2WoVXGPNxxq4XLoTEuieXCqmikhc9tSSTwk+Tp
 CKHN6wU=
 =JkJ4
 -----END PGP SIGNATURE-----

Merge tag 'v5.3-rc6' into perf/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-08-26 11:59:57 +02:00
Ivan Khoronzhuk 71dd77fd4b libbpf: use LFS (_FILE_OFFSET_BITS) instead of direct mmap2 syscall
Drop __NR_mmap2 fork in flavor of LFS, that is _FILE_OFFSET_BITS=64
(glibc & bionic) / LARGEFILE64_SOURCE (for musl) decision. It allows
mmap() to use 64bit offset that is passed to mmap2 syscall. As result
pgoff is not truncated and no need to use direct access to mmap2 for
32 bits systems.

Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-21 14:31:17 +02:00
Quentin Monnet 09d7c2e32b libbpf: add bpf_btf_get_next_id() to cycle through BTF objects
Add an API function taking a BTF object id and providing the id of the
next BTF object in the kernel. This can be used to list all BTF objects
loaded on the system.

v2:
- Rebase on top of Andrii's changes regarding libbpf versioning.

Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-08-20 09:51:06 -07:00
Quentin Monnet a6e130c420 libbpf: refactor bpf_*_get_next_id() functions
In preparation for the introduction of a similar function for retrieving
the id of the next BTF object, consolidate the code from
bpf_prog_get_next_id() and bpf_map_get_next_id() in libbpf.

Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-08-20 09:51:06 -07:00
Steven Rostedt (VMware) 82a2f88458 tools lib traceevent: Fix "robust" test of do_generate_dynamic_list_file
The tools/lib/traceevent/Makefile had a test added to it to detect a failure
of the "nm" when making the dynamic list file (whatever that is). The
problem is that the test sorts the values "U W w" and some versions of sort
will place "w" ahead of "W" (even though it has a higher ASCII value, and
break the test.

Add 'tr "w" "W"' to merge the two and not worry about the ordering.

Reported-by: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Carrillo-Cisneros <davidcc@google.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michal rarek <mmarek@suse.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: stable@vger.kernel.org
Fixes: 6467753d61 ("tools lib traceevent: Robustify do_generate_dynamic_list_file")
Link: http://lkml.kernel.org/r/20190805130150.25acfeb1@gandalf.local.home
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-20 12:18:54 -03:00
David S. Miller 446bf64b61 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Merge conflict of mlx5 resolved using instructions in merge
commit 9566e650bf.

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-19 11:54:03 -07:00
Magnus Karlsson a4500432c2 libbpf: add support for need_wakeup flag in AF_XDP part
This commit adds support for the new need_wakeup flag in AF_XDP. The
xsk_socket__create function is updated to handle this and a new
function is introduced called xsk_ring_prod__needs_wakeup(). This
function can be used by the application to check if Rx and/or Tx
processing needs to be explicitly woken up.

Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-17 23:07:32 +02:00
Andrii Nakryiko dadb81d0af libbpf: make libbpf.map source of truth for libbpf version
Currently libbpf version is specified in 2 places: libbpf.map and
Makefile. They easily get out of sync and it's very easy to update one,
but forget to update another one. In addition, Github projection of
libbpf has to maintain its own version which has to be remembered to be
kept in sync manually, which is very error-prone approach.

This patch makes libbpf.map a source of truth for libbpf version and
uses shell invocation to parse out correct full and major libbpf version
to use during build. Now we need to make sure that once new release
cycle starts, we need to add (initially) empty section to libbpf.map
with correct latest version.

This also will make it possible to keep Github projection consistent
with kernel sources version of libbpf by adopting similar parsing of
version from libbpf.map.

v2->v3:
- grep -o + sort -rV (Andrey);

v1->v2:
- eager version vars evaluation (Jakub);
- simplified version regex (Andrey);

Cc: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-08-15 17:03:26 -07:00
Jakub Kicinski 708852dcac Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:

====================
The following pull-request contains BPF updates for your *net-next* tree.

There is a small merge conflict in libbpf (Cc Andrii so he's in the loop
as well):

        for (i = 1; i <= btf__get_nr_types(btf); i++) {
                t = (struct btf_type *)btf__type_by_id(btf, i);

                if (!has_datasec && btf_is_var(t)) {
                        /* replace VAR with INT */
                        t->info = BTF_INFO_ENC(BTF_KIND_INT, 0, 0);
  <<<<<<< HEAD
                        /*
                         * using size = 1 is the safest choice, 4 will be too
                         * big and cause kernel BTF validation failure if
                         * original variable took less than 4 bytes
                         */
                        t->size = 1;
                        *(int *)(t+1) = BTF_INT_ENC(0, 0, 8);
                } else if (!has_datasec && kind == BTF_KIND_DATASEC) {
  =======
                        t->size = sizeof(int);
                        *(int *)(t + 1) = BTF_INT_ENC(0, 0, 32);
                } else if (!has_datasec && btf_is_datasec(t)) {
  >>>>>>> 72ef80b5ee
                        /* replace DATASEC with STRUCT */

Conflict is between the two commits 1d4126c4e1 ("libbpf: sanitize VAR to
conservative 1-byte INT") and b03bc6853c ("libbpf: convert libbpf code to
use new btf helpers"), so we need to pick the sanitation fixup as well as
use the new btf_is_datasec() helper and the whitespace cleanup. Looks like
the following:

  [...]
                if (!has_datasec && btf_is_var(t)) {
                        /* replace VAR with INT */
                        t->info = BTF_INFO_ENC(BTF_KIND_INT, 0, 0);
                        /*
                         * using size = 1 is the safest choice, 4 will be too
                         * big and cause kernel BTF validation failure if
                         * original variable took less than 4 bytes
                         */
                        t->size = 1;
                        *(int *)(t + 1) = BTF_INT_ENC(0, 0, 8);
                } else if (!has_datasec && btf_is_datasec(t)) {
                        /* replace DATASEC with STRUCT */
  [...]

The main changes are:

1) Addition of core parts of compile once - run everywhere (co-re) effort,
   that is, relocation of fields offsets in libbpf as well as exposure of
   kernel's own BTF via sysfs and loading through libbpf, from Andrii.

   More info on co-re: http://vger.kernel.org/bpfconf2019.html#session-2
   and http://vger.kernel.org/lpc-bpf2018.html#session-2

2) Enable passing input flags to the BPF flow dissector to customize parsing
   and allowing it to stop early similar to the C based one, from Stanislav.

3) Add a BPF helper function that allows generating SYN cookies from XDP and
   tc BPF, from Petar.

4) Add devmap hash-based map type for more flexibility in device lookup for
   redirects, from Toke.

5) Improvements to XDP forwarding sample code now utilizing recently enabled
   devmap lookups, from Jesper.

6) Add support for reporting the effective cgroup progs in bpftool, from Jakub
   and Takshak.

7) Fix reading kernel config from bpftool via /proc/config.gz, from Peter.

8) Fix AF_XDP umem pages mapping for 32 bit architectures, from Ivan.

9) Follow-up to add two more BPF loop tests for the selftest suite, from Alexei.

10) Add perf event output helper also for other skb-based program types, from Allan.

11) Fix a co-re related compilation error in selftests, from Yonghong.
====================

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-08-13 16:24:57 -07:00
Andrii Nakryiko a1916a153c libbpf: attempt to load kernel BTF from sysfs first
Add support for loading kernel BTF from sysfs (/sys/kernel/btf/vmlinux)
as a target BTF. Also extend the list of on disk search paths for
vmlinux ELF image with entries that perf is searching for.

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-13 23:19:42 +02:00
David S. Miller 9481382b36 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:

====================
pull-request: bpf 2019-08-11

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) x64 JIT code generation fix for backward-jumps to 1st insn, from Alexei.

2) Fix buggy multi-closing of BTF file descriptor in libbpf, from Andrii.

3) Fix libbpf_num_possible_cpus() to make it thread safe, from Takshak.

4) Fix bpftool to dump an error if pinning fails, from Jakub.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-11 14:49:34 -07:00
Andrii Nakryiko ddc7c30426 libbpf: implement BPF CO-RE offset relocation algorithm
This patch implements the core logic for BPF CO-RE offsets relocations.
Every instruction that needs to be relocated has corresponding
bpf_offset_reloc as part of BTF.ext. Relocations are performed by trying
to match recorded "local" relocation spec against potentially many
compatible "target" types, creating corresponding spec. Details of the
algorithm are noted in corresponding comments in the code.

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-08-07 14:43:49 -07:00
Andrii Nakryiko 4cedc0dad9 libbpf: add .BTF.ext offset relocation section loading
Add support for BPF CO-RE offset relocations. Add section/record
iteration macros for .BTF.ext. These macro are useful for iterating over
each .BTF.ext record, either for dumping out contents or later for BPF
CO-RE relocation handling.

To enable other parts of libbpf to work with .BTF.ext contents, moved
a bunch of type definitions into libbpf_internal.h.

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-08-07 14:43:49 -07:00
Andrii Nakryiko b03bc6853c libbpf: convert libbpf code to use new btf helpers
Simplify code by relying on newly added BTF helper functions.

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-08-07 14:43:49 -07:00
Andrii Nakryiko ef20a9b27c libbpf: add helpers for working with BTF types
Add lots of frequently used helpers that simplify working with BTF
types.

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-08-07 14:43:49 -07:00
Linus Torvalds 33920f1ec5 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from David Miller:
 "Yeah I should have sent a pull request last week, so there is a lot
  more here than usual:

   1) Fix memory leak in ebtables compat code, from Wenwen Wang.

   2) Several kTLS bug fixes from Jakub Kicinski (circular close on
      disconnect etc.)

   3) Force slave speed check on link state recovery in bonding 802.3ad
      mode, from Thomas Falcon.

   4) Clear RX descriptor bits before assigning buffers to them in
      stmmac, from Jose Abreu.

   5) Several missing of_node_put() calls, mostly wrt. for_each_*() OF
      loops, from Nishka Dasgupta.

   6) Double kfree_skb() in peak_usb can driver, from Stephane Grosjean.

   7) Need to hold sock across skb->destructor invocation, from Cong
      Wang.

   8) IP header length needs to be validated in ipip tunnel xmit, from
      Haishuang Yan.

   9) Use after free in ip6 tunnel driver, also from Haishuang Yan.

  10) Do not use MSI interrupts on r8169 chips before RTL8168d, from
      Heiner Kallweit.

  11) Upon bridge device init failure, we need to delete the local fdb.
      From Nikolay Aleksandrov.

  12) Handle erros from of_get_mac_address() properly in stmmac, from
      Martin Blumenstingl.

  13) Handle concurrent rename vs. dump in netfilter ipset, from Jozsef
      Kadlecsik.

  14) Setting NETIF_F_LLTX on mac80211 causes complete breakage with
      some devices, so revert. From Johannes Berg.

  15) Fix deadlock in rxrpc, from David Howells.

  16) Fix Kconfig deps of enetc driver, we must have PHYLIB. From Yue
      Haibing.

  17) Fix mvpp2 crash on module removal, from Matteo Croce.

  18) Fix race in genphy_update_link, from Heiner Kallweit.

  19) bpf_xdp_adjust_head() stopped working with generic XDP when we
      fixes generic XDP to support stacked devices properly, fix from
      Jesper Dangaard Brouer.

  20) Unbalanced RCU locking in rt6_update_exception_stamp_rt(), from
      David Ahern.

  21) Several memory leaks in new sja1105 driver, from Vladimir Oltean"

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (214 commits)
  net: dsa: sja1105: Fix memory leak on meta state machine error path
  net: dsa: sja1105: Fix memory leak on meta state machine normal path
  net: dsa: sja1105: Really fix panic on unregistering PTP clock
  net: dsa: sja1105: Use the LOCKEDS bit for SJA1105 E/T as well
  net: dsa: sja1105: Fix broken learning with vlan_filtering disabled
  net: dsa: qca8k: Add of_node_put() in qca8k_setup_mdio_bus()
  net: sched: sample: allow accessing psample_group with rtnl
  net: sched: police: allow accessing police->params with rtnl
  net: hisilicon: Fix dma_map_single failed on arm64
  net: hisilicon: fix hip04-xmit never return TX_BUSY
  net: hisilicon: make hip04_tx_reclaim non-reentrant
  tc-testing: updated vlan action tests with batch create/delete
  net sched: update vlan action for batched events operations
  net: stmmac: tc: Do not return a fragment entry
  net: stmmac: Fix issues when number of Queues >= 4
  net: stmmac: xgmac: Fix XGMAC selftests
  be2net: disable bh with spin_lock in be_process_mcc
  net: cxgb3_main: Fix a resource leak in a error path in 'init_one()'
  net: ethernet: sun4i-emac: Support phy-handle property for finding PHYs
  net: bridge: move default pvid init/deinit to NETDEV_REGISTER/UNREGISTER
  ...
2019-08-06 17:11:59 -07:00
Andrii Nakryiko 3415ec643e libbpf: set BTF FD for prog only when there is supported .BTF.ext data
5d01ab7bac ("libbpf: fix erroneous multi-closing of BTF FD")
introduced backwards-compatibility issue, manifesting itself as -E2BIG
error returned on program load due to unknown non-zero btf_fd attribute
value for BPF_PROG_LOAD sys_bpf() sub-command.

This patch fixes bug by ensuring that we only ever associate BTF FD with
program if there is a BTF.ext data that was successfully loaded into
kernel, which automatically means kernel supports func_info/line_info
and associated BTF FD for progs (checked and ensured also by BTF
sanitization code).

Fixes: 5d01ab7bac ("libbpf: fix erroneous multi-closing of BTF FD")
Reported-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-08-01 13:10:45 -07:00
Takshak Chahande 56fbc24116 libbpf : make libbpf_num_possible_cpus function thread safe
Having static variable `cpus` in libbpf_num_possible_cpus function
without guarding it with mutex makes this function thread-unsafe.

If multiple threads accessing this function, in the current form; it
leads to incrementing the static variable value `cpus` in the multiple
of total available CPUs.

Used local stack variable to calculate the number of possible CPUs and
then updated the static variable using WRITE_ONCE().

Changes since v1:
 * added stack variable to calculate cpus
 * serialized static variable update using WRITE_ONCE()
 * fixed Fixes tag

Fixes: 6446b31555 ("bpf: add a new API libbpf_num_possible_cpus()")
Signed-off-by: Takshak Chahande <ctakshak@fb.com>
Acked-by: Andrey Ignatov <rdna@fb.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-07-31 20:35:19 -07:00
Toke Høiland-Jørgensen e42346192c tools/libbpf_probes: Add new devmap_hash type
This adds the definition for BPF_MAP_TYPE_DEVMAP_HASH to libbpf_probes.c in
tools/lib/bpf.

Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-07-29 13:50:48 -07:00
Andrii Nakryiko 8aa259b10a libbpf: fix missing __WORDSIZE definition
hashmap.h depends on __WORDSIZE being defined. It is defined by
glibc/musl in different headers. It's an explicit goal for musl to be
"non-detectable" at compilation time, so instead include glibc header if
glibc is explicitly detected and fall back to musl header otherwise.

Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Fixes: e3b9242240 ("libbpf: add resizable non-thread safe internal hashmap")
Link: https://lkml.kernel.org/r/20190718173021.2418606-1-andriin@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-29 10:18:08 -03:00
Andrii Nakryiko e87fd8bae4 libbpf: return previous print callback from libbpf_set_print
By returning previously set print callback from libbpf_set_print, it's
possible to restore it, eventually. This is useful when running many
independent test with one default print function, but overriding log
verbosity for particular subset of tests.

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-07-27 22:36:19 -07:00
Andrii Nakryiko 5d01ab7bac libbpf: fix erroneous multi-closing of BTF FD
Libbpf stores associated BTF FD per each instance of bpf_program. When
program is unloaded, that FD is closed. This is wrong, because leads to
a race and possibly closing of unrelated files, if application
simultaneously opens new files while bpf_programs are unloaded.

It's also unnecessary, because struct btf "owns" that FD, and
btf__free(), called from bpf_object__close() will close it. Thus the fix
is to never have per-program BTF FD and fetch it from obj->btf, when
necessary.

Fixes: 2993e0515b ("tools/bpf: add support to read .BTF.ext sections")
Reported-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-07-26 17:23:16 -07:00
David S. Miller 28ba934d28 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Alexei Starovoitov says:

====================
pull-request: bpf 2019-07-25

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) fix segfault in libbpf, from Andrii.

2) fix gso_segs access, from Eric.

3) tls/sockmap fixes, from Jakub and John.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-25 17:35:03 -07:00