Also, convert all SDCC IRQ resources to be named. No longer pass status_irq
in the platform_data
Signed-off-by: Dima Zavin <dima@android.com>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Support independent enable and disable by clients for common
vreg. First enable switches on and last disable switches off.
This change has no check for voltage level so clients
must agree on level for common vreg.
Signed-off-by: Matthew Wilson <mtwilson@quicinc.com>
Fixes the following warning,
arch/arm/mach-msm/acpuclock-arm11.c:138: warning: 'freq_table' defined but not used
when CONFIG_CPU_FREQ_TABLE is not enabled.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Keep track of the success/failure of the last vreg proc comm
command, and return that on debugfs reads.
Signed-off-by: Steve Muckle <smuckle@quicinc.com>
This adds acpuclock-arm11.c from Google. This provides control
over the cpu frequency for arm11 cpu's.
This has shared authorship between Google, and Qualcomm. Most
of it was written by Mike Chan at Google.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Handle incorrectly reported permission faults for qsd8650. On
permission faults, retry MVA to PA conversion. If retry detects
translation fault. Report as translation fault.
Cc: Jamie Lokier <jamie@shareable.org>
Signed-off-by: Dave Estes <cestes@quicinc.com>
ARCH_MSM supports armv7 cpus, so we're pushed the CPU_V6/CPU_V7 selection
down into the arch/arm/mach-msm/Kconfig.
Also update the description to be a bit more accurate.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6:
Staging: vme: Re-introduce necessary brackets
Staging: iio: fix up the iio_get_new_idr_val comment
Staging: add Add Sitecom WL-349 to rtl8192su
Staging: rt2860: add Belkin F5D8055 Wireless-N USB Dongle device id
staging: rtl8192su: add Support for Belkin F5D8053 v6
Staging: dt3155: fix 50Hz configuration
staging: usbip: Fix deadlock
Staging: rtl8192su: add USB ID for 0bda:8171
Staging: hv: name network device ethX rather than sethX
Staging: hv: Fix up memory leak on HvCleanup
Staging: hv: Fix a bug affecting IPv6
staging: iio: ring_sw: Fix incorrect test on successful read of last value, causes infinite loop
staging: iio: Function iio_get_new_idr_val() return negative value if fails.
Staging: iio: adc: fix dangling pointers
Staging: iio: light: fix dangling pointers
Staging: iio: test for failed allocation
staging: iio: lis3l02dq - incorrect ws used in container of call.
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (29 commits)
USB: sl811-hcd: Fix device disconnect
USB: ohci-at91: fix power management hanging
USB: rename usb_buffer_alloc() and usb_buffer_free()
USB: ti_usb: fix printk format warning
USB: gadget: s3c-hsotg: Add missing unlock
USB: fix build on OMAPs if CONFIG_PM_RUNTIME is not set
USB: oxu210hp: release spinlock on error path
USB: serial: option: add cinterion device id
USB: serial: option: ZTEAC8710 Support with Device ID 0xffff
USB: serial: pl2303: Hybrid reader Uniform HCR331
USB: option: add ID for ZTE MF 330
USB: xhci: properly set endpoint context fields for periodic eps.
USB: xhci: properly set the "Mult" field of the endpoint context.
USB: OHCI: don't look at the root hub to get the number of ports
USB: don't choose configs with no interfaces
USB: cdc-acm: add another device quirk
USB: fix testing the wrong variable in fs_create_by_name()
usb: Fix tusb6010 for DMA API
musb_core: fix musb_init_controller() error cleanup path
MUSB: fix DaVinci glue layer dependency
...
CONFIG_INOTIFY_USER defined but CONFIG_ANON_INODES undefined will result
in the following build failure:
LD vmlinux
fs/built-in.o: In function 'sys_inotify_init1':
(.text.sys_inotify_init1+0x22c): undefined reference to 'anon_inode_getfd'
fs/built-in.o: In function `sys_inotify_init1':
(.text.sys_inotify_init1+0x22c): relocation truncated to fit: R_MIPS_26 against 'anon_inode_getfd'
make[2]: *** [vmlinux] Error 1
make[1]: *** [sub-make] Error 2
make: *** [all] Error 2
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'merge' of git://git.secretlab.ca/git/linux-2.6:
spi: spidev_test gives error upon 1-byte transfer
omap2_mcspi: small fixes of output data format
omap2_mcspi: Flush posted writes
spi: spi_device memory should be released instead of device.
spi: release device claimed by bus_find_device_by_name
of: check for IS_ERR()
serial/mpc52xx_uart: Drop outdated comments
gpio: potential null dereference
Somehow I managed to remove a set of rather necessary brackets in commit
29848ac9f3. Put them back.
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
improve the comment a bit
Cc: Greg KH <greg@kroah.com>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Cc: Sonic Zhang <sonic.adi@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add Belkin F5D8055 Wireless-N USB support to the rt2870
staging driver.
Signed-off-by: Chris Largret <largret@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Please find attached a patch which adds the device ID for the Belkin
F5D8053 v6 to the rtl8192su driver. I've tested this in 2.6.34-rc3
(Ubuntu 9.10 amd64) and the network adapter is working flawlessly.
Signed-off-by: Richard Airlie <richard@backtrace.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
According to the header file, dt3155_io.h, the 50/60 Hz configuration
is controlled by a bit in the I2C CSR2 register (bit 2). The function
dt3155_init_isr actually reads the I2C CONFIG register into the global
I2C_CSR union variable then modifies the bit. It then does a write
to the I2C CONFIG register with the global I2C_CONFIG union variable
which is not even set with a value anywhere in the driver.
My guess is 50Hz operation doesn't even work as-is.
Fix this by actually reading and writing the correct register with
the correct value.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Simon Horman <horms@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
When detaching a port from the client side (usbip --detach 0),
the event thread, on the server side, is going to deadlock.
The "eh" server thread is getting USBIP_EH_RESET event and calls:
-> stub_device_reset() -> usb_reset_device()
the USB framework is then calling back _in the same "eh" thread_ :
-> stub_disconnect() -> usbip_stop_eh() -> wait_for_completion()
the "eh" thread is being asleep forever, waiting for its own completion.
This patch checks if "eh" is the current thread, in usbip_stop_eh().
Signed-off-by: Eric Lescouet <eric@lescouet.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch makes the HyperV network device use the same naming scheme as
other virtual drivers (Xen, KVM). In an ideal world, userspace tools
would not care what the name is, but some users and applications do
care. Vyatta CLI is one of the tools that does depend on what the name
is.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a bad one. The test means that almost no reads of the last
value ever succeed! Result is an infinite loop.
Another one for the 'oops' category.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Function iio_get_new_idr_val() return negative value if fails.
So, only error when ret < 0 in iio_device_register_eventset().
Signed-off-by: Sonic Zhang <sonic.adi@gmail.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix I2C-drivers which missed setting clientdata to NULL before freeing the
structure it points to. Also fix drivers which do this _after_ the structure
was freed already.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix I2C-drivers which missed setting clientdata to NULL before freeing the
structure it points to. Also fix drivers which do this _after_ the structure
was freed already.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
We should return test to see if iio_allocate_trigger() fails and return -ENOMEM.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The word oops comes to mind. Original patch to merge the two work queues
in here (prior to Greg taking them into staging) changed the top half to
only use one of them and the bottom half to assume it was the other.
Currently causes a NULL pointer dereference if you enable any of the events
on an lis3l02dq. Just goes to show I need a few more regression tests.
Signed-of-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Dima Zavin
San Mehat
Daniel Walker
Willie Ruan
Matt Wilson
Steve Muckle
Brian Swetland
Arve Hjønnevåg
Dave Estes
Linus Torvalds
Borislav Petkov
Ralf Baechle
Martyn Welch
Andrew Morton
Rodrigo Linfati
Chris Largret
Richard Airlie
H Hartley Sweeten
Eric Lescouet
Pavel Roskin
Stephen Hemminger
Cyrill Gorcunov
Haiyang Zhang
Jonathan Cameron
Sonic Zhang
Wolfram Sang
Dan Carpenter