Граф коммитов

8 Коммитов

Автор SHA1 Сообщение Дата
Wolfram Sang 9f8f53a617 i2c: i2c-stub: sort includes
I request this for drivers, so the core should adhere to sorted includes as
well.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-02-20 23:33:39 +01:00
Wolfram Sang ca1f8da9ac i2c: remove FSF address
We have a central copy of the GPL for that. Some addresses were already
outdated.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2014-11-07 18:35:33 +01:00
Jean Delvare 0f6ba0d15f i2c: stub: Avoid an array overrun on I2C block transfers
I2C block transfers can have a size up to 32 bytes. If starting close
to the end of the address space, there may not be enough room to write
that many bytes (on I2C block writes) or not enough bytes to be read
(on I2C block reads.) In that case, we must shorten the transfer so
that it does not exceed the address space.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-07-20 13:25:29 +02:00
Jean Delvare 2408c17fce i2c: stub: Add support for banked register ranges
Some chips implement banked register ranges. This allows implementing
more registers than the limited 8-bit address space originally allows.
In order to access a register on these chips, you must first select
the proper bank. Add support for this mechanism to the i2c-stub driver
so that such chips can be emulated. All the bank settings are passed
as module parameters.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-07-17 19:56:15 +02:00
Jean Delvare 1dff59831b i2c: stub: Remember the number of emulated chips
This makes initialization, cleanup and look-up easier.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-07-17 19:56:10 +02:00
Guenter Roeck 6f16b75a41 i2c: stub: Add support for SMBus block commands
SMBus block commands are different to I2C block commands since
the returned data is not normally accessible with byte or word
commands on other command offsets. Add linked list of 'block'
commands to support those commands.

Access mechanism is quite simple: Block commands must be written
before they can be read. Subsequent writes can be partial. Block
read commands always return the number of bytes associated with
the longest previous write.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-07-17 19:11:35 +02:00
Jean Delvare 7c81c60f37 Update Jean Delvare's e-mail address
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2014-01-29 20:40:08 +01:00
Jean Delvare 31d178bffc i2c-stub: Move to drivers/i2c
Move the i2c-stub driver to drivers/i2c, to match the Kconfig entry.
This is less confusing that way.

I also fixed all checkpatch warnings and errors.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Peter Huewe <peterhuewe@gmx.de>
2012-10-28 21:37:00 +01:00