Граф коммитов

18 Коммитов

Автор SHA1 Сообщение Дата
Tero Kristo ab7b2ffcf5 ARM: OMAP2+: PRM: move SoC specific init calls within a generic API
This gets rid of need for some exported driver APIs, and simplifies the
initialization of the PRM driver. Done in preparation to make PRM a
separate driver. The init data is now also passed to the SoC specific
implementations, allowing future expansion to add feature flags etc.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-03-31 21:26:36 +03:00
Tero Kristo ae521d4d9c ARM: OMAP2+: PRM: determine PRM base address from device tree
There is no need to provide the PRM base address through a low-level API
from the low-level IO init, as this information is available through DT.
Re-routed the parsing function to be called from the PRM drivers also to
simplify the implementation under io.c.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-03-27 10:55:58 +02:00
Tero Kristo 9cb6d36371 ARM: OMAP2+: PRM: add generic API for clear_mod_irqs
OMAP2/3 now use generic API for the prm_clear_mod_irqs, the SoC specific
implementation details are provided through prm_ll_data.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-03-25 11:03:37 +02:00
Tero Kristo 61c8621e2b ARM: OMAP2+: PRM: provide generic API for system reset
This patch combines the various prm_warm_reset calls under a common
API prm_reset_system, and adds the SoC specific implementation under
prm_ll_data.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Paul Walmsley <paul@pwsan.com>
Tested-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-10-27 08:39:26 -07:00
Tero Kristo 1bc28b3472 ARM: OMAP2+: PRM: add generic API for checking hardreset status
PRM driver now has a generic API for checking hardreset status. SoC
specific support functions are registered through the prm_ll_data.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Paul Walmsley <paul@pwsan.com>
Tested-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-10-27 08:39:25 -07:00
Tero Kristo 37fb59d7e0 ARM: OMAP2+: PRM: add generic API for deasserting hardware reset
PRM driver now has a generic API for deasserting hardware resets. SoC
specific support functions are registered through the prm_ll_data.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Paul Walmsley <paul@pwsan.com>
Tested-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-10-27 08:39:25 -07:00
Tero Kristo efd44dc35f ARM: OMAP2+: PRM: add generic API for asserting hardware reset
PRM driver now has a generic API for asserting hardware resets. SoC
specific support functions are registered through the prm_ll_data.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Paul Walmsley <paul@pwsan.com>
Tested-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-10-27 08:39:24 -07:00
Tero Kristo 6bdc4b44b3 ARM: OMAP24xx: PRM: add API for clearing wakeup status bits
This helps to isolate the PRM into its own driver.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2014-07-04 17:02:16 +03:00
Tero Kristo d8871cd245 ARM: OMAP2+: PRM: remove unnecessary cpu_is_XXX calls from prm_init / exit
Done in preparation to make PRM its own driver, as the cpu_is_XXX calls are
not available outside mach-omap2 folder.

The init functions are called only from cpu specific init chain, and thus
don't need to double check against cpu type.

The exit calls check against the data provided during init-time registration
and thus don't need cpu check either.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
[paul@pwsan.com: updated to apply]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2014-05-15 22:34:51 -06:00
Tony Lindgren 2cd1f483b8 Some OMAP PRCM and sparse fixes against v3.8-rc1. A basic set of test
logs are available here:
 
     http://www.pwsan.com/omap/testlogs/prcm_fixes_b_3.8-rc/20130102120724/
 
 The 3730 Beagle XM here has an intermittent failure mounting SD root,
 but the suspicion right now is that this is due to a failing SD card,
 rather than any change introduced by these patches.
 
 This second version includes a few changes requested by Tony Lindgren.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJQ5IkPAAoJEMePsQ0LvSpL/RQQAJUbGPZTdMEH2DHHDVPRxgBE
 bWEg0RQfzheOLfFvfot2tReJoN7GMlhzcDq2DSHZLwp5b9XgOgOJdNdldvrvFljD
 p3QEy+y/7ZSgsAdgDV33vAAUAv4c0CIh0cKgw3JwOn/dqVSbiMXXqXe1kZe419gi
 bbJHBr6fZH63qvGzkjI17vl3lDq6RsX7vgtEQ9TeiTMUAOnrXzp3rt9oDNVsChSs
 Ml6h1WKnxQdMFjbNNmBOUGltSg7O1rwuWeS/9mg77yV3lIZ5QdmAVlcq6lUB+jqy
 CWhAYbrhXMBPYFaxzw0I8h00m0VNBSOZf2e1d5Lw8wU8dVxQ3PVZCI4SyRssBdd3
 T+91zy4Axmo+SWrkTxpq+yE2Sn1AMZC4mJwI62UhCZV8TPPvek8IlK3ktKeV97ql
 BNehuGYqbc3u5TiIjO8K+akTBKKTVDdXaah9ms8rtQ4hcwLwC0VA/71R9qaQJx3E
 mGf3pRK6FSV83vEMrGb2mRk3ByGHzpYlMD0sb4+0OFvkj5Hyv7OCPb0TJapn6OPO
 vpeG6pIbHN3p/mKrj/RNHVtvpV5/mHJmMOXgkcXLcdlZhsnGE21dqw/vPrvjf3Wa
 SnUp7q48/4a2FP2d0KpQ+CpHyLyNEs4x4zs9hfjHGsYs1fWBwdu0+/8rVPaAEjjB
 iUa8sxlv/1o0rJfiyRkd
 =oUTN
 -----END PGP SIGNATURE-----

Merge tag 'omap-fixes-a2-for-v3.8-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into omap-for-v3.8-rc2/fixes

Some OMAP PRCM and sparse fixes against v3.8-rc1.  A basic set of test
logs are available here:

    http://www.pwsan.com/omap/testlogs/prcm_fixes_b_3.8-rc/20130102120724/

The 3730 Beagle XM here has an intermittent failure mounting SD root,
but the suspicion right now is that this is due to a failing SD card,
rather than any change introduced by these patches.

This second version includes a few changes requested by Tony Lindgren.
2013-01-03 11:04:21 -08:00
Paul Walmsley 7e7fff8254 ARM: OMAP2/3: PRM: fix bogus OMAP2xxx powerstate return values
On OMAP2xxx chips, the register bitfields for the
PM_PWSTCTRL_*.POWERSTATE and PM_PWSTST_*.LASTSTATEENTERED are
different than those used on OMAP3/4.  The order is reversed.  So, for
example, on OMAP2xxx, 0x0 indicates 'ON'; but on OMAP3/4, 0x0
indicates 'OFF'.  Similarly, on OMAP2xxx, 0x3 indicates 'OFF', but on
OMAP3/4, 0x3 indicates 'ON'.

To fix this, we treat the OMAP3/4 values as the powerdomain API
values, and create new low-level powerdomain functions for the
OMAP2xxx chips which translate between the OMAP2xxx values and the
OMAP3/4 values.

Without this patch, the conversion of the OMAP2xxx PM code to the
functional powerstate code results in a non-booting kernel.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
2013-01-02 12:07:16 -07:00
Tony Lindgren e8d3d47a98 ARM: OMAP2+: Drop plat/cpu.h for omap2plus
The cpu_is_omap macros are now local to arch/arm/mach-omap2
in soc.h and plat/cpu.h can finally be dropped for omap2+.
Thanks everybody for help with fixing the drivers.

Note that we can now also remove the unused plat/cpu.h from
smartreflex.c and isp.c as they will cause compile errors
with ARCH_MULTIPLATFORM enabled.

Cc: Kevin Hilman <khilman@deeprootsystems.com>
Acked-by: Jean Pihet <jean.pihet@newoldbits.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-12-17 10:50:41 -08:00
Paul Walmsley 63a293e000 ARM: OMAP2+: PRM: initialize some PRM functions early
Some PRM functions will need to be called by the hwmod code early in
kernel init.  To handle this, split the PRM initialization code into
early and late phases.  The early init is handled via mach-omap2/io.c,
while the late init is handled by subsys_initcall().

Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-11-21 16:15:16 -07:00
Paul Walmsley b99db36cdf ARM: OMAP2+: PRCM: remove obsolete prcm.[ch]
arch/arm/mach-omap2/prcm.c and arch/arm/plat-omap/include/plat/prcm.h
are now completely unused and can be removed.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Tested-by: Vaibhav Hiremath <hvaibhav@ti.com>
2012-11-08 15:09:26 -07:00
Paul Walmsley d08cce6a1d ARM: OMAP2/3: PRM: add SoC reset functions (using the CORE DPLL method)
Add SoC reset functions into the PRM code.  These functions are based
on code from mach-omap2/prcm.c.  They reset the SoC using the CORE DPLL
reset method (as opposed to one of the other two or three chip reset
methods).

Adding them here will facilitate their removal from
arch/arm/mach-omap2/prcm.c.  (prcm.c is deprecated.)

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Tested-by: Vaibhav Hiremath <hvaibhav@ti.com>
2012-11-08 12:33:07 -07:00
Paul Walmsley 2bb2a5d30a ARM: OMAP2+: PRM: create PRM reset source API for the watchdog timer driver
The OMAP watchdog timer driver needs to determine what caused the SoC
to reset for its GETBOOTSTATUS ioctl.  So, define a set of standard
reset sources across OMAP SoCs.  For OMAP2xxx, 3xxx, and 4xxx SoCs,
define mappings from the SoC-specific reset source register bits to
the standardized reset source IDs.  Create SoC-specific PRM functions
that read the appropriate per-SoC register and use the mapping to
return the standardized reset bits.  Register the SoC-specific PRM
functions with the common PRM code via prm_register().  Create a
function in the common PRM code, prm_read_reset_sources(), that
calls the SoC-specific function, registered during boot.

This patch does not yet handle some SoCs, such as AM33xx.  Those SoCs
were not handled by the code this will replace.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-10-21 01:01:13 -06:00
Paul Walmsley 4bd5259e53 ARM: OMAP2/3: clockdomain/PRM/CM: move the low-level clockdomain functions into PRM/CM
Move the low-level SoC-specific clockdomain control functions into
cm*.c and prm*.c.  For example, OMAP2xxx low-level clockdomain
functions go into cm2xxx.c.  Then remove the unnecessary
clockdomain*xxx*.c files.

The objective is to centralize low-level CM and PRM register accesses
into the cm*.[ch] and prm*.[ch] files, and then to export an OMAP
SoC-independent API to higher-level OMAP power management code.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Vaibhav Hiremath <hvaibhav@ti.com>
Acked-by: Rajendra Nayak <rnayak@ti.com>
Reviewed-by: Russ Dill <Russ.Dill@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-10-21 01:01:11 -06:00
Paul Walmsley 498153995b ARM: OMAP2+: powerdomain/PRM: move the low-level powerdomain functions into PRM
Move the low-level SoC-specific powerdomain control functions into
prm*.c.  For example, OMAP2xxx low-level powerdomain functions go into
prm2xxx.c.  Then remove the unnecessary powerdomain*xxx*.c files.

The objective is to centralize low-level PRM register accesses into
the prm*.[ch] files, and then to export an OMAP SoC-independent API to
higher-level OMAP power management code.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Vaibhav Hiremath <hvaibhav@ti.com>
Acked-by: Rajendra Nayak <rnayak@ti.com>
Reviewed-by: Russ Dill <Russ.Dill@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-10-21 01:01:10 -06:00