Граф коммитов

11 Коммитов

Автор SHA1 Сообщение Дата
Michal Malý a54dc7795e HID: hid-lg4ff: Introduce a module parameter to disable automatic switch of compatibility mode
Introduce a module parameter to disable automatic switch of Logitech gaming
wheels from compatibility to native mode. This only applies to multimode wheels.

Signed-off-by: Michal Malý <madcatxster@devoid-pointer.net>
Tested-by: Simon Wood <simon@mungewell.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-02-18 21:14:54 +01:00
Michal Malý 2b24a96001 HID: hid-lg4ff: Adjust X axis input value accordingly to selected range.
Range limiting command for the Driving Force Pro wheel is only a FF_SPRING
effect so that the wheel creates resistance when the user tries to turn it past
the limit. It is however possible to overpower the FFB motors quite easily which
leads to the X axis value exceeding the expected limit. This confuses
games which dynamically adjust calibration using the highest/lowest min and max
values reported by the wheel. Joydev device driver also doesn't take in account
any changes in an axis range after the joystick device is created.

This patch recalculates received ABS_X axis value so it is always in
<0; 16383> range where 0 is the left limit and 16383 the right limit.
Logitech driver for Windows does the same thing.  As for any concerns about
possible loss of precision, I compared a large set of raw/adjusted values
generated by "mult_frac" to values returned by the Windows driver and I got
a 100% match.

Other Logitech wheels will probably need a similar fix, but I currently lack
the information needed to write one.

Signed-off-by: Michal Malý <madcatxster@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-09-25 15:41:02 +02:00
Michal Malý 6a2e176b2d HID: lg4ff: Remove sysfs iface before deallocating memory
This patch fixes a possible race condition caused by the sysfs
interface being removed after the memory used by the interface
was already kfree'd.

Signed-off-by: Michal Malý <madcatsxter@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-04-03 04:11:12 +02:00
Michal Malý 8577dbf9d6 HID: hid-lg: Allow for custom device-specific properties to be stored in priv drvdata
This patch adds support for custom device-specific properties which can now be
stored as private driver data and read/saved using hid_get/set_drvdata().

Signed-off-by: Michal Malý <madcatxster@gmail.com>
Tested-by: simon@mungewell.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-04-03 04:09:50 +02:00
Michal Malý a7ac90f18c HID: lg4ff - Fix misleading info in Kconfig
The description of lg4ff driver has to be changed to reflect the fact that the
driver now handles a lot more Logitech wh the Wii. Entry in Kconfig has been
renamed to LOGIWHEELS_FF

Signed-off-by: Michal Malý <madcatxster@gmail.com>
Signed-off-by: Simon Wood <simon@mungewell.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-08-04 16:45:55 +02:00
Michal Malý 30bb75d71b HID: lg4ff - Add range setting support and sysfs interface
Wheel range of certain Logitech wheels - namely Driving Force GT, Driving Force
Pro, G25 and G27 can be adjusted. Minimu is 40 degrees, maximum 900. DFGT, G25
and G27 all use a common command, DFP uses another one.  Range can be set from
userspace by writing to
"/sys/module/hid_logitech/drivers/hid:logitech/<dev>range". The driver use list
to store range of each connected wheel; it's not possible to use driver_data in
hid_device struct as it's already b hig-lg driver.

Signed-off-by: Michal Malý <madcatxster@gmail.com>
Signed-off-by: Simon Wood <simon@mungewell.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-08-04 16:45:55 +02:00
Simon Wood 32c88cbc30 HID: Add support for Logitech Speed Force Wireless gaming wheel
The following patch adds support for the Logitech Speed Force Wireless gaming
wheel. Originally designed for the WII console. Details on the protocol:

http://wiibrew.org/wiki/Logitech_USB_steering_wheel

This patch relies on previous patch:
"Don't Send Feature Reports on Interrupt Endpoint"

Logitech as produce a very similar wheel for the PS2/PS3, it is expected that
this patch could also support the PS2/PS3 wheel if the USB ID's are added and
(if required) the HID descriptor is modified.

Signed-off-by: Simon Wood <simon@mungewell.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-22 13:25:39 +02:00
Jiri Kosina e1a0bdd802 Merge branch 'master' into upstream
Conflicts:
	drivers/hid/hid-ids.h
2010-02-02 23:10:39 +01:00
Gary Stein 74f292ca8c HID: add driver for the Logitech Flight System G940
Implements a new USB-HID for Force Feedback based on the normal
Logitech Force Feedback code and FF-Memless.

Currently only supports the FF_CONSTANT effect although the joystick
appears to support additional non-standard ones.

Signed-off-by: Gary Stein <LordCnidarian@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-01-13 00:26:31 +01:00
Sam Ravnborg 98b8788ae9 drop explicit include of autoconf.h
kbuild.h forces include of autoconf.h on the
commandline using -include - so we do not need to
include the file explicit.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2009-12-12 13:08:15 +01:00
Jiri Slaby 606bd0a861 HID: move logitech FF processing
Merge the logitech force feedback processing directly into logitech
driver from the usbhid core.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14 23:50:56 +02:00