If a trace event uses the %*.s notation, the trace_check_vprintf() will
fail and will warn about a bad processing of strings, because it does not
take into account the length field when processing the star (*) part.
Have it handle this case as well.
Link: https://lore.kernel.org/linux-nfs/238C0E2D-C2A4-4578-ADD2-C565B3B99842@oracle.com/
Reported-by: Chuck Lever III <chuck.lever@oracle.com>
Fixes: 9a6944fee6 ("tracing: Add a verifier to check string pointers for trace events")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Now that there's a library that accesses the tracefs file system,
(libtracefs), the way the files are interacted with is slightly
different than the command line. For instance, the write() system
call is used directly instead of an echo. This exposes some old bugs.
If a probe is written to "set_ftrace_filter" without any white space
after it, it will be ignored. This is because the write expects
that a string written to it that does not end with white spaces thinks
there is more to come. But if the file is closed, the release function
needs to finish it. The "set_ftrace_filter" release function handles
the filter part of the "set_ftrace_filter" file, but did not handle
the probe part.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYJP4OBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6quzjAQCoFQXkJtYhwlMk0dTxclrsQlm0t93H
pHwJA9Zyxe25UgD8D/rpG/wtHaSSuP6omEDbqvshpNdszqKb0Nt+UM116QU=
=niJ6
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"Fix probes written to the set_ftrace_filter file
Now that there's a library that accesses the tracefs file system
(libtracefs), the way the files are interacted with is slightly
different than the command line. For instance, the write() system call
is used directly instead of an echo. This exposes some old bugs.
If a probe is written to "set_ftrace_filter" without any white space
after it, it will be ignored. This is because the write expects that a
string written to it that does not end with white spaces thinks there
is more to come. But if the file is closed, the release function needs
to finish it. The "set_ftrace_filter" release function handles the
filter part of the "set_ftrace_filter" file, but did not handle the
probe part"
* tag 'trace-v5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace: Handle commands when closing set_ftrace_filter file
# echo switch_mm:traceoff > /sys/kernel/tracing/set_ftrace_filter
will cause switch_mm to stop tracing by the traceoff command.
# echo -n switch_mm:traceoff > /sys/kernel/tracing/set_ftrace_filter
does nothing.
The reason is that the parsing in the write function only processes
commands if it finished parsing (there is white space written after the
command). That's to handle:
write(fd, "switch_mm:", 10);
write(fd, "traceoff", 8);
cases, where the command is broken over multiple writes.
The problem is if the file descriptor is closed, then the write call is
not processed, and the command needs to be processed in the release code.
The release code can handle matching of functions, but does not handle
commands.
Cc: stable@vger.kernel.org
Fixes: eda1e32855 ("tracing: handle broken names in ftrace filter")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
New feature:
The "func-no-repeats" option in tracefs/options directory. When set
the function tracer will detect if the current function being traced
is the same as the previous one, and instead of recording it, it will
keep track of the number of times that the function is repeated in a row.
And when another function is recorded, it will write a new event that
shows the function that repeated, the number of times it repeated and
the time stamp of when the last repeated function occurred.
Enhancements:
In order to implement the above "func-no-repeats" option, the ring
buffer timestamp can now give the accurate timestamp of the event
as it is being recorded, instead of having to record an absolute
timestamp for all events. This helps the histogram code which no longer
needs to waste ring buffer space.
New validation logic to make sure all trace events that access
dereferenced pointers do so in a safe way, and will warn otherwise.
Fixes:
No longer limit the PIDs of tasks that are recorded for "saved_cmdlines"
to PID_MAX_DEFAULT (32768), as systemd now allows for a much larger
range. This caused the mapping of PIDs to the task names to be dropped
for all tasks with a PID greater than 32768.
Change trace_clock_global() to never block. This caused a deadlock.
Clean ups:
Typos, prototype fixes, and removing of duplicate or unused code.
Better management of ftrace_page allocations.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYI/1vBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qiL0AP9EemIC5TDh2oihqLRNeUjdTu0ryEoM
HRFqxozSF985twD/bfkt86KQC8rLHwxTbxQZ863bmdaC6cMGFhWiF+H/MAs=
=psYt
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"New feature:
- A new "func-no-repeats" option in tracefs/options directory.
When set the function tracer will detect if the current function
being traced is the same as the previous one, and instead of
recording it, it will keep track of the number of times that the
function is repeated in a row. And when another function is
recorded, it will write a new event that shows the function that
repeated, the number of times it repeated and the time stamp of
when the last repeated function occurred.
Enhancements:
- In order to implement the above "func-no-repeats" option, the ring
buffer timestamp can now give the accurate timestamp of the event
as it is being recorded, instead of having to record an absolute
timestamp for all events. This helps the histogram code which no
longer needs to waste ring buffer space.
- New validation logic to make sure all trace events that access
dereferenced pointers do so in a safe way, and will warn otherwise.
Fixes:
- No longer limit the PIDs of tasks that are recorded for
"saved_cmdlines" to PID_MAX_DEFAULT (32768), as systemd now allows
for a much larger range. This caused the mapping of PIDs to the
task names to be dropped for all tasks with a PID greater than
32768.
- Change trace_clock_global() to never block. This caused a deadlock.
Clean ups:
- Typos, prototype fixes, and removing of duplicate or unused code.
- Better management of ftrace_page allocations"
* tag 'trace-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (32 commits)
tracing: Restructure trace_clock_global() to never block
tracing: Map all PIDs to command lines
ftrace: Reuse the output of the function tracer for func_repeats
tracing: Add "func_no_repeats" option for function tracing
tracing: Unify the logic for function tracing options
tracing: Add method for recording "func_repeats" events
tracing: Add "last_func_repeats" to struct trace_array
tracing: Define new ftrace event "func_repeats"
tracing: Define static void trace_print_time()
ftrace: Simplify the calculation of page number for ftrace_page->records some more
ftrace: Store the order of pages allocated in ftrace_page
tracing: Remove unused argument from "ring_buffer_time_stamp()
tracing: Remove duplicate struct declaration in trace_events.h
tracing: Update create_system_filter() kernel-doc comment
tracing: A minor cleanup for create_system_filter()
kernel: trace: Mundane typo fixes in the file trace_events_filter.c
tracing: Fix various typos in comments
scripts/recordmcount.pl: Make vim and emacs indent the same
scripts/recordmcount.pl: Make indent spacing consistent
tracing: Add a verifier to check string pointers for trace events
...
It was reported that a fix to the ring buffer recursion detection would
cause a hung machine when performing suspend / resume testing. The
following backtrace was extracted from debugging that case:
Call Trace:
trace_clock_global+0x91/0xa0
__rb_reserve_next+0x237/0x460
ring_buffer_lock_reserve+0x12a/0x3f0
trace_buffer_lock_reserve+0x10/0x50
__trace_graph_return+0x1f/0x80
trace_graph_return+0xb7/0xf0
? trace_clock_global+0x91/0xa0
ftrace_return_to_handler+0x8b/0xf0
? pv_hash+0xa0/0xa0
return_to_handler+0x15/0x30
? ftrace_graph_caller+0xa0/0xa0
? trace_clock_global+0x91/0xa0
? __rb_reserve_next+0x237/0x460
? ring_buffer_lock_reserve+0x12a/0x3f0
? trace_event_buffer_lock_reserve+0x3c/0x120
? trace_event_buffer_reserve+0x6b/0xc0
? trace_event_raw_event_device_pm_callback_start+0x125/0x2d0
? dpm_run_callback+0x3b/0xc0
? pm_ops_is_empty+0x50/0x50
? platform_get_irq_byname_optional+0x90/0x90
? trace_device_pm_callback_start+0x82/0xd0
? dpm_run_callback+0x49/0xc0
With the following RIP:
RIP: 0010:native_queued_spin_lock_slowpath+0x69/0x200
Since the fix to the recursion detection would allow a single recursion to
happen while tracing, this lead to the trace_clock_global() taking a spin
lock and then trying to take it again:
ring_buffer_lock_reserve() {
trace_clock_global() {
arch_spin_lock() {
queued_spin_lock_slowpath() {
/* lock taken */
(something else gets traced by function graph tracer)
ring_buffer_lock_reserve() {
trace_clock_global() {
arch_spin_lock() {
queued_spin_lock_slowpath() {
/* DEAD LOCK! */
Tracing should *never* block, as it can lead to strange lockups like the
above.
Restructure the trace_clock_global() code to instead of simply taking a
lock to update the recorded "prev_time" simply use it, as two events
happening on two different CPUs that calls this at the same time, really
doesn't matter which one goes first. Use a trylock to grab the lock for
updating the prev_time, and if it fails, simply try again the next time.
If it failed to be taken, that means something else is already updating
it.
Link: https://lkml.kernel.org/r/20210430121758.650b6e8a@gandalf.local.home
Cc: stable@vger.kernel.org
Tested-by: Konstantin Kharlamov <hi-angel@yandex.ru>
Tested-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Fixes: b02414c8f0 ("ring-buffer: Fix recursion protection transitions between interrupt context") # started showing the problem
Fixes: 14131f2f98 ("tracing: implement trace_clock_*() APIs") # where the bug happened
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=212761
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Core:
- bpf:
- allow bpf programs calling kernel functions (initially to
reuse TCP congestion control implementations)
- enable task local storage for tracing programs - remove the
need to store per-task state in hash maps, and allow tracing
programs access to task local storage previously added for
BPF_LSM
- add bpf_for_each_map_elem() helper, allowing programs to
walk all map elements in a more robust and easier to verify
fashion
- sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT
redirection
- lpm: add support for batched ops in LPM trie
- add BTF_KIND_FLOAT support - mostly to allow use of BTF
on s390 which has floats in its headers files
- improve BPF syscall documentation and extend the use of kdoc
parsing scripts we already employ for bpf-helpers
- libbpf, bpftool: support static linking of BPF ELF files
- improve support for encapsulation of L2 packets
- xdp: restructure redirect actions to avoid a runtime lookup,
improving performance by 4-8% in microbenchmarks
- xsk: build skb by page (aka generic zerocopy xmit) - improve
performance of software AF_XDP path by 33% for devices
which don't need headers in the linear skb part (e.g. virtio)
- nexthop: resilient next-hop groups - improve path stability
on next-hops group changes (incl. offload for mlxsw)
- ipv6: segment routing: add support for IPv4 decapsulation
- icmp: add support for RFC 8335 extended PROBE messages
- inet: use bigger hash table for IP ID generation
- tcp: deal better with delayed TX completions - make sure we don't
give up on fast TCP retransmissions only because driver is
slow in reporting that it completed transmitting the original
- tcp: reorder tcp_congestion_ops for better cache locality
- mptcp:
- add sockopt support for common TCP options
- add support for common TCP msg flags
- include multiple address ids in RM_ADDR
- add reset option support for resetting one subflow
- udp: GRO L4 improvements - improve 'forward' / 'frag_list'
co-existence with UDP tunnel GRO, allowing the first to take
place correctly even for encapsulated UDP traffic
- micro-optimize dev_gro_receive() and flow dissection, avoid
retpoline overhead on VLAN and TEB GRO
- use less memory for sysctls, add a new sysctl type, to allow using
u8 instead of "int" and "long" and shrink networking sysctls
- veth: allow GRO without XDP - this allows aggregating UDP
packets before handing them off to routing, bridge, OvS, etc.
- allow specifing ifindex when device is moved to another namespace
- netfilter:
- nft_socket: add support for cgroupsv2
- nftables: add catch-all set element - special element used
to define a default action in case normal lookup missed
- use net_generic infra in many modules to avoid allocating
per-ns memory unnecessarily
- xps: improve the xps handling to avoid potential out-of-bound
accesses and use-after-free when XPS change race with other
re-configuration under traffic
- add a config knob to turn off per-cpu netdev refcnt to catch
underflows in testing
Device APIs:
- add WWAN subsystem to organize the WWAN interfaces better and
hopefully start driving towards more unified and vendor-
-independent APIs
- ethtool:
- add interface for reading IEEE MIB stats (incl. mlx5 and
bnxt support)
- allow network drivers to dump arbitrary SFP EEPROM data,
current offset+length API was a poor fit for modern SFP
which define EEPROM in terms of pages (incl. mlx5 support)
- act_police, flow_offload: add support for packet-per-second
policing (incl. offload for nfp)
- psample: add additional metadata attributes like transit delay
for packets sampled from switch HW (and corresponding egress
and policy-based sampling in the mlxsw driver)
- dsa: improve support for sandwiched LAGs with bridge and DSA
- netfilter:
- flowtable: use direct xmit in topologies with IP
forwarding, bridging, vlans etc.
- nftables: counter hardware offload support
- Bluetooth:
- improvements for firmware download w/ Intel devices
- add support for reading AOSP vendor capabilities
- add support for virtio transport driver
- mac80211:
- allow concurrent monitor iface and ethernet rx decap
- set priority and queue mapping for injected frames
- phy: add support for Clause-45 PHY Loopback
- pci/iov: add sysfs MSI-X vector assignment interface
to distribute MSI-X resources to VFs (incl. mlx5 support)
New hardware/drivers:
- dsa: mv88e6xxx: add support for Marvell mv88e6393x -
11-port Ethernet switch with 8x 1-Gigabit Ethernet
and 3x 10-Gigabit interfaces.
- dsa: support for legacy Broadcom tags used on BCM5325, BCM5365
and BCM63xx switches
- Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches
- ath11k: support for QCN9074 a 802.11ax device
- Bluetooth: Broadcom BCM4330 and BMC4334
- phy: Marvell 88X2222 transceiver support
- mdio: add BCM6368 MDIO mux bus controller
- r8152: support RTL8153 and RTL8156 (USB Ethernet) chips
- mana: driver for Microsoft Azure Network Adapter (MANA)
- Actions Semi Owl Ethernet MAC
- can: driver for ETAS ES58X CAN/USB interfaces
Pure driver changes:
- add XDP support to: enetc, igc, stmmac
- add AF_XDP support to: stmmac
- virtio:
- page_to_skb() use build_skb when there's sufficient tailroom
(21% improvement for 1000B UDP frames)
- support XDP even without dedicated Tx queues - share the Tx
queues with the stack when necessary
- mlx5:
- flow rules: add support for mirroring with conntrack,
matching on ICMP, GTP, flex filters and more
- support packet sampling with flow offloads
- persist uplink representor netdev across eswitch mode
changes
- allow coexistence of CQE compression and HW time-stamping
- add ethtool extended link error state reporting
- ice, iavf: support flow filters, UDP Segmentation Offload
- dpaa2-switch:
- move the driver out of staging
- add spanning tree (STP) support
- add rx copybreak support
- add tc flower hardware offload on ingress traffic
- ionic:
- implement Rx page reuse
- support HW PTP time-stamping
- octeon: support TC hardware offloads - flower matching on ingress
and egress ratelimitting.
- stmmac:
- add RX frame steering based on VLAN priority in tc flower
- support frame preemption (FPE)
- intel: add cross time-stamping freq difference adjustment
- ocelot:
- support forwarding of MRP frames in HW
- support multiple bridges
- support PTP Sync one-step timestamping
- dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like
learning, flooding etc.
- ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350,
SC7280 SoCs)
- mt7601u: enable TDLS support
- mt76:
- add support for 802.3 rx frames (mt7915/mt7615)
- mt7915 flash pre-calibration support
- mt7921/mt7663 runtime power management fixes
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=vcbA
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- bpf:
- allow bpf programs calling kernel functions (initially to
reuse TCP congestion control implementations)
- enable task local storage for tracing programs - remove the
need to store per-task state in hash maps, and allow tracing
programs access to task local storage previously added for
BPF_LSM
- add bpf_for_each_map_elem() helper, allowing programs to walk
all map elements in a more robust and easier to verify fashion
- sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT
redirection
- lpm: add support for batched ops in LPM trie
- add BTF_KIND_FLOAT support - mostly to allow use of BTF on
s390 which has floats in its headers files
- improve BPF syscall documentation and extend the use of kdoc
parsing scripts we already employ for bpf-helpers
- libbpf, bpftool: support static linking of BPF ELF files
- improve support for encapsulation of L2 packets
- xdp: restructure redirect actions to avoid a runtime lookup,
improving performance by 4-8% in microbenchmarks
- xsk: build skb by page (aka generic zerocopy xmit) - improve
performance of software AF_XDP path by 33% for devices which don't
need headers in the linear skb part (e.g. virtio)
- nexthop: resilient next-hop groups - improve path stability on
next-hops group changes (incl. offload for mlxsw)
- ipv6: segment routing: add support for IPv4 decapsulation
- icmp: add support for RFC 8335 extended PROBE messages
- inet: use bigger hash table for IP ID generation
- tcp: deal better with delayed TX completions - make sure we don't
give up on fast TCP retransmissions only because driver is slow in
reporting that it completed transmitting the original
- tcp: reorder tcp_congestion_ops for better cache locality
- mptcp:
- add sockopt support for common TCP options
- add support for common TCP msg flags
- include multiple address ids in RM_ADDR
- add reset option support for resetting one subflow
- udp: GRO L4 improvements - improve 'forward' / 'frag_list'
co-existence with UDP tunnel GRO, allowing the first to take place
correctly even for encapsulated UDP traffic
- micro-optimize dev_gro_receive() and flow dissection, avoid
retpoline overhead on VLAN and TEB GRO
- use less memory for sysctls, add a new sysctl type, to allow using
u8 instead of "int" and "long" and shrink networking sysctls
- veth: allow GRO without XDP - this allows aggregating UDP packets
before handing them off to routing, bridge, OvS, etc.
- allow specifing ifindex when device is moved to another namespace
- netfilter:
- nft_socket: add support for cgroupsv2
- nftables: add catch-all set element - special element used to
define a default action in case normal lookup missed
- use net_generic infra in many modules to avoid allocating
per-ns memory unnecessarily
- xps: improve the xps handling to avoid potential out-of-bound
accesses and use-after-free when XPS change race with other
re-configuration under traffic
- add a config knob to turn off per-cpu netdev refcnt to catch
underflows in testing
Device APIs:
- add WWAN subsystem to organize the WWAN interfaces better and
hopefully start driving towards more unified and vendor-
independent APIs
- ethtool:
- add interface for reading IEEE MIB stats (incl. mlx5 and bnxt
support)
- allow network drivers to dump arbitrary SFP EEPROM data,
current offset+length API was a poor fit for modern SFP which
define EEPROM in terms of pages (incl. mlx5 support)
- act_police, flow_offload: add support for packet-per-second
policing (incl. offload for nfp)
- psample: add additional metadata attributes like transit delay for
packets sampled from switch HW (and corresponding egress and
policy-based sampling in the mlxsw driver)
- dsa: improve support for sandwiched LAGs with bridge and DSA
- netfilter:
- flowtable: use direct xmit in topologies with IP forwarding,
bridging, vlans etc.
- nftables: counter hardware offload support
- Bluetooth:
- improvements for firmware download w/ Intel devices
- add support for reading AOSP vendor capabilities
- add support for virtio transport driver
- mac80211:
- allow concurrent monitor iface and ethernet rx decap
- set priority and queue mapping for injected frames
- phy: add support for Clause-45 PHY Loopback
- pci/iov: add sysfs MSI-X vector assignment interface to distribute
MSI-X resources to VFs (incl. mlx5 support)
New hardware/drivers:
- dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port
Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit
interfaces.
- dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and
BCM63xx switches
- Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches
- ath11k: support for QCN9074 a 802.11ax device
- Bluetooth: Broadcom BCM4330 and BMC4334
- phy: Marvell 88X2222 transceiver support
- mdio: add BCM6368 MDIO mux bus controller
- r8152: support RTL8153 and RTL8156 (USB Ethernet) chips
- mana: driver for Microsoft Azure Network Adapter (MANA)
- Actions Semi Owl Ethernet MAC
- can: driver for ETAS ES58X CAN/USB interfaces
Pure driver changes:
- add XDP support to: enetc, igc, stmmac
- add AF_XDP support to: stmmac
- virtio:
- page_to_skb() use build_skb when there's sufficient tailroom
(21% improvement for 1000B UDP frames)
- support XDP even without dedicated Tx queues - share the Tx
queues with the stack when necessary
- mlx5:
- flow rules: add support for mirroring with conntrack, matching
on ICMP, GTP, flex filters and more
- support packet sampling with flow offloads
- persist uplink representor netdev across eswitch mode changes
- allow coexistence of CQE compression and HW time-stamping
- add ethtool extended link error state reporting
- ice, iavf: support flow filters, UDP Segmentation Offload
- dpaa2-switch:
- move the driver out of staging
- add spanning tree (STP) support
- add rx copybreak support
- add tc flower hardware offload on ingress traffic
- ionic:
- implement Rx page reuse
- support HW PTP time-stamping
- octeon: support TC hardware offloads - flower matching on ingress
and egress ratelimitting.
- stmmac:
- add RX frame steering based on VLAN priority in tc flower
- support frame preemption (FPE)
- intel: add cross time-stamping freq difference adjustment
- ocelot:
- support forwarding of MRP frames in HW
- support multiple bridges
- support PTP Sync one-step timestamping
- dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like
learning, flooding etc.
- ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350,
SC7280 SoCs)
- mt7601u: enable TDLS support
- mt76:
- add support for 802.3 rx frames (mt7915/mt7615)
- mt7915 flash pre-calibration support
- mt7921/mt7663 runtime power management fixes"
* tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits)
net: selftest: fix build issue if INET is disabled
net: netrom: nr_in: Remove redundant assignment to ns
net: tun: Remove redundant assignment to ret
net: phy: marvell: add downshift support for M88E1240
net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255
net/sched: act_ct: Remove redundant ct get and check
icmp: standardize naming of RFC 8335 PROBE constants
bpf, selftests: Update array map tests for per-cpu batched ops
bpf: Add batched ops support for percpu array
bpf: Implement formatted output helpers with bstr_printf
seq_file: Add a seq_bprintf function
sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues
net:nfc:digital: Fix a double free in digital_tg_recv_dep_req
net: fix a concurrency bug in l2tp_tunnel_register()
net/smc: Remove redundant assignment to rc
mpls: Remove redundant assignment to err
llc2: Remove redundant assignment to rc
net/tls: Remove redundant initialization of record
rds: Remove redundant assignment to nr_sig
dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0
...
The default max PID is set by PID_MAX_DEFAULT, and the tracing
infrastructure uses this number to map PIDs to the comm names of the
tasks, such output of the trace can show names from the recorded PIDs in
the ring buffer. This mapping is also exported to user space via the
"saved_cmdlines" file in the tracefs directory.
But currently the mapping expects the PIDs to be less than
PID_MAX_DEFAULT, which is the default maximum and not the real maximum.
Recently, systemd will increases the maximum value of a PID on the system,
and when tasks are traced that have a PID higher than PID_MAX_DEFAULT, its
comm is not recorded. This leads to the entire trace to have "<...>" as
the comm name, which is pretty useless.
Instead, keep the array mapping the size of PID_MAX_DEFAULT, but instead
of just mapping the index to the comm, map a mask of the PID
(PID_MAX_DEFAULT - 1) to the comm, and find the full PID from the
map_cmdline_to_pid array (that already exists).
This bug goes back to the beginning of ftrace, but hasn't been an issue
until user space started increasing the maximum value of PIDs.
Link: https://lkml.kernel.org/r/20210427113207.3c601884@gandalf.local.home
Cc: stable@vger.kernel.org
Fixes: bc0c38d139 ("ftrace: latency tracer infrastructure")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
BPF has three formatted output helpers: bpf_trace_printk, bpf_seq_printf
and bpf_snprintf. Their signatures specify that all arguments are
provided from the BPF world as u64s (in an array or as registers). All
of these helpers are currently implemented by calling functions such as
snprintf() whose signatures take a variable number of arguments, then
placed in a va_list by the compiler to call vsnprintf().
"d9c9e4db bpf: Factorize bpf_trace_printk and bpf_seq_printf" introduced
a bpf_printf_prepare function that fills an array of u64 sanitized
arguments with an array of "modifiers" which indicate what the "real"
size of each argument should be (given by the format specifier). The
BPF_CAST_FMT_ARG macro consumes these arrays and casts each argument to
its real size. However, the C promotion rules implicitely cast them all
back to u64s. Therefore, the arguments given to snprintf are u64s and
the va_list constructed by the compiler will use 64 bits for each
argument. On 64 bit machines, this happens to work well because 32 bit
arguments in va_lists need to occupy 64 bits anyway, but on 32 bit
architectures this breaks the layout of the va_list expected by the
called function and mangles values.
In "88a5c690b6 bpf: fix bpf_trace_printk on 32 bit archs", this problem
had been solved for bpf_trace_printk only with a "horrid workaround"
that emitted multiple calls to trace_printk where each call had
different argument types and generated different va_list layouts. One of
the call would be dynamically chosen at runtime. This was ok with the 3
arguments that bpf_trace_printk takes but bpf_seq_printf and
bpf_snprintf accept up to 12 arguments. Because this approach scales
code exponentially, it is not a viable option anymore.
Because the promotion rules are part of the language and because the
construction of a va_list is an arch-specific ABI, it's best to just
avoid variadic arguments and va_lists altogether. Thankfully the
kernel's snprintf() has an alternative in the form of bstr_printf() that
accepts arguments in a "binary buffer representation". These binary
buffers are currently created by vbin_printf and used in the tracing
subsystem to split the cost of printing into two parts: a fast one that
only dereferences and remembers values, and a slower one, called later,
that does the pretty-printing.
This patch refactors bpf_printf_prepare to construct binary buffers of
arguments consumable by bstr_printf() instead of arrays of arguments and
modifiers. This gets rid of BPF_CAST_FMT_ARG and greatly simplifies the
bpf_printf_prepare usage but there are a few gotchas that change how
bpf_printf_prepare needs to do things.
Currently, bpf_printf_prepare uses a per cpu temporary buffer as a
generic storage for strings and IP addresses. With this refactoring, the
temporary buffers now holds all the arguments in a structured binary
format.
To comply with the format expected by bstr_printf, certain format
specifiers also need to be pre-formatted: %pB and %pi6/%pi4/%pI4/%pI6.
Because vsnprintf subroutines for these specifiers are hard to expose,
we pre-format these arguments with calls to snprintf().
Reported-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210427174313.860948-3-revest@chromium.org
bpf_trace_printk uses a shared static buffer to hold strings before they
are printed. A recent refactoring moved the locking of that buffer after
it gets filled by mistake.
Fixes: d9c9e4db18 ("bpf: Factorize bpf_trace_printk and bpf_seq_printf")
Reported-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210427112958.773132-1-revest@chromium.org
Core changes:
- Provide IRQF_NO_AUTOEN as a flag for request*_irq() so drivers can be
cleaned up which either use a seperate mechanism to prevent auto-enable
at request time or have a racy mechanism which disables the interrupt
right after request.
- Get rid of the last usage of irq_create_identity_mapping() and remove
the interface.
- An overhaul of tasklet_disable(). Most usage sites of tasklet_disable()
are in task context and usually in cleanup, teardown code pathes.
tasklet_disable() spinwaits for a tasklet which is currently executed.
That's not only a problem for PREEMPT_RT where this can lead to a live
lock when the disabling task preempts the softirq thread. It's also
problematic in context of virtualization when the vCPU which runs the
tasklet is scheduled out and the disabling code has to spin wait until
it's scheduled back in. Though there are a few code pathes which invoke
tasklet_disable() from non-sleepable context. For these a new disable
variant which still spinwaits is provided which allows to switch
tasklet_disable() to a sleep wait mechanism. For the atomic use cases
this does not solve the live lock issue on PREEMPT_RT. That is mitigated
by blocking on the RT specific softirq lock.
- The PREEMPT_RT specific implementation of softirq processing and
local_bh_disable/enable().
On RT enabled kernels soft interrupt processing happens always in task
context and all interrupt handlers, which are not explicitly marked to
be invoked in hard interrupt context are forced into task context as
well. This allows to protect against softirq processing with a per
CPU lock, which in turn allows to make BH disabled regions preemptible.
Most of the softirq handling code is still shared. The RT/non-RT
specific differences are addressed with a set of inline functions which
provide the context specific functionality. The local_bh_disable() /
local_bh_enable() mechanism are obviously seperate.
- The usual set of small improvements and cleanups
Driver changes:
- New drivers for Nuvoton WPCM450 and DT 79rc3243x interrupt controllers
- Extended functionality for MStar, STM32 and SC7280 irq chips
- Enhanced robustness for ARM GICv3/4.1 drivers
- The usual set of cleanups and improvements all over the place
-----BEGIN PGP SIGNATURE-----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=id4G
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2021-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"The usual updates from the irq departement:
Core changes:
- Provide IRQF_NO_AUTOEN as a flag for request*_irq() so drivers can
be cleaned up which either use a seperate mechanism to prevent
auto-enable at request time or have a racy mechanism which disables
the interrupt right after request.
- Get rid of the last usage of irq_create_identity_mapping() and
remove the interface.
- An overhaul of tasklet_disable().
Most usage sites of tasklet_disable() are in task context and
usually in cleanup, teardown code pathes. tasklet_disable()
spinwaits for a tasklet which is currently executed. That's not
only a problem for PREEMPT_RT where this can lead to a live lock
when the disabling task preempts the softirq thread. It's also
problematic in context of virtualization when the vCPU which runs
the tasklet is scheduled out and the disabling code has to spin
wait until it's scheduled back in.
There are a few code pathes which invoke tasklet_disable() from
non-sleepable context. For these a new disable variant which still
spinwaits is provided which allows to switch tasklet_disable() to a
sleep wait mechanism. For the atomic use cases this does not solve
the live lock issue on PREEMPT_RT. That is mitigated by blocking on
the RT specific softirq lock.
- The PREEMPT_RT specific implementation of softirq processing and
local_bh_disable/enable().
On RT enabled kernels soft interrupt processing happens always in
task context and all interrupt handlers, which are not explicitly
marked to be invoked in hard interrupt context are forced into task
context as well. This allows to protect against softirq processing
with a per CPU lock, which in turn allows to make BH disabled
regions preemptible.
Most of the softirq handling code is still shared. The RT/non-RT
specific differences are addressed with a set of inline functions
which provide the context specific functionality. The
local_bh_disable() / local_bh_enable() mechanism are obviously
seperate.
- The usual set of small improvements and cleanups
Driver changes:
- New drivers for Nuvoton WPCM450 and DT 79rc3243x interrupt
controllers
- Extended functionality for MStar, STM32 and SC7280 irq chips
- Enhanced robustness for ARM GICv3/4.1 drivers
- The usual set of cleanups and improvements all over the place"
* tag 'irq-core-2021-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits)
irqchip/xilinx: Expose Kconfig option for Zynq/ZynqMP
irqchip/gic-v3: Do not enable irqs when handling spurious interrups
dt-bindings: interrupt-controller: Add IDT 79RC3243x Interrupt Controller
irqchip: Add support for IDT 79rc3243x interrupt controller
irqdomain: Drop references to recusive irqdomain setup
irqdomain: Get rid of irq_create_strict_mappings()
irqchip/jcore-aic: Kill use of irq_create_strict_mappings()
ARM: PXA: Kill use of irq_create_strict_mappings()
irqchip/gic-v4.1: Disable vSGI upon (GIC CPUIF < v4.1) detection
irqchip/tb10x: Use 'fallthrough' to eliminate a warning
genirq: Reduce irqdebug cacheline bouncing
kernel: Initialize cpumask before parsing
irqchip/wpcm450: Drop COMPILE_TEST
irqchip/irq-mst: Support polarity configuration
irqchip: Add driver for WPCM450 interrupt controller
dt-bindings: interrupt-controller: Add nuvoton, wpcm450-aic
dt-bindings: qcom,pdc: Add compatible for sc7280
irqchip/stm32: Add usart instances exti direct event support
irqchip/gic-v3: Fix OF_BAD_ADDR error handling
irqchip/sifive-plic: Mark two global variables __ro_after_init
...
Alexei Starovoitov says:
====================
pull-request: bpf-next 2021-04-23
The following pull-request contains BPF updates for your *net-next* tree.
We've added 69 non-merge commits during the last 22 day(s) which contain
a total of 69 files changed, 3141 insertions(+), 866 deletions(-).
The main changes are:
1) Add BPF static linker support for extern resolution of global, from Andrii.
2) Refine retval for bpf_get_task_stack helper, from Dave.
3) Add a bpf_snprintf helper, from Florent.
4) A bunch of miscellaneous improvements from many developers.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Masami added a wrapper to be able to unhash trace event pointers
as they are only read by root anyway, and they can also be extracted
by the raw trace data buffers. But this wrapper utilized the iterator
to have a temporary buffer to manipulate the text with.
tp_printk is a kernel command line option that will send the trace
output of a trace event to the console on boot up (useful when the
system crashes before finishing the boot). But the code used the same
wrapper that Masami added, and its iterator did not have a buffer,
and this caused the system to crash.
Have the wrapper just print the trace event normally if the iterator
has no temporary buffer.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYH8exRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qlvdAP436vts0GOM8UM0y9IAPNrSG5OSvjNe
v5C5UOpnIxjlrgEArBtLLDaByLSBDQj+Vx0LmDW5uMOps49mo3A35TcIEAM=
=GfL1
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"Fix tp_printk command line and trace events
Masami added a wrapper to be able to unhash trace event pointers as
they are only read by root anyway, and they can also be extracted by
the raw trace data buffers. But this wrapper utilized the iterator to
have a temporary buffer to manipulate the text with.
tp_printk is a kernel command line option that will send the trace
output of a trace event to the console on boot up (useful when the
system crashes before finishing the boot). But the code used the same
wrapper that Masami added, and its iterator did not have a buffer, and
this caused the system to crash.
Have the wrapper just print the trace event normally if the iterator
has no temporary buffer"
* tag 'trace-v5.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix checking event hash pointer logic when tp_printk is enabled
Pointers in events that are printed are unhashed if the flags allow it,
and the logic to do so is called before processing the event output from
the raw ring buffer. In most cases, this is done when a user reads one of
the trace files.
But if tp_printk is added on the kernel command line, this logic is done
for trace events when they are triggered, and their output goes out via
printk. The unhash logic (and even the validation of the output) did not
support the tp_printk output, and would crash.
Link: https://lore.kernel.org/linux-tegra/9835d9f1-8d3a-3440-c53f-516c2606ad07@nvidia.com/
Fixes: efbbdaa22b ("tracing: Show real address for trace event arguments")
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The implementation takes inspiration from the existing bpf_trace_printk
helper but there are a few differences:
To allow for a large number of format-specifiers, parameters are
provided in an array, like in bpf_seq_printf.
Because the output string takes two arguments and the array of
parameters also takes two arguments, the format string needs to fit in
one argument. Thankfully, ARG_PTR_TO_CONST_STR is guaranteed to point to
a zero-terminated read-only map so we don't need a format string length
arg.
Because the format-string is known at verification time, we also do
a first pass of format string validation in the verifier logic. This
makes debugging easier.
Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210419155243.1632274-4-revest@chromium.org
Two helpers (trace_printk and seq_printf) have very similar
implementations of format string parsing and a third one is coming
(snprintf). To avoid code duplication and make the code easier to
maintain, this moves the operations associated with format string
parsing (validation and argument sanitization) into one generic
function.
The implementation of the two existing helpers already drifted quite a
bit so unifying them entailed a lot of changes:
- bpf_trace_printk always expected fmt[fmt_size] to be the terminating
NULL character, this is no longer true, the first 0 is terminating.
- bpf_trace_printk now supports %% (which produces the percentage char).
- bpf_trace_printk now skips width formating fields.
- bpf_trace_printk now supports the X modifier (capital hexadecimal).
- bpf_trace_printk now supports %pK, %px, %pB, %pi4, %pI4, %pi6 and %pI6
- argument casting on 32 bit has been simplified into one macro and
using an enum instead of obscure int increments.
- bpf_seq_printf now uses bpf_trace_copy_string instead of
strncpy_from_kernel_nofault and handles the %pks %pus specifiers.
- bpf_seq_printf now prints longs correctly on 32 bit architectures.
- both were changed to use a global per-cpu tmp buffer instead of one
stack buffer for trace_printk and 6 small buffers for seq_printf.
- to avoid per-cpu buffer usage conflict, these helpers disable
preemption while the per-cpu buffer is in use.
- both helpers now support the %ps and %pS specifiers to print symbols.
The implementation is also moved from bpf_trace.c to helpers.c because
the upcoming bpf_snprintf helper will be made available to all BPF
programs and will need it.
Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210419155243.1632274-2-revest@chromium.org
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
- keep the ZC code, drop the code related to reinit
net/bridge/netfilter/ebtables.c
- fix build after move to net_generic
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The func_repeats event shows the output of the function tracer followed by
a count of the number of repeats the previous function had made, as well
as the timestamp of the last function that was repeated.
The printing of the function should be the same as is for the function it
is displaying. Reuse the code in trace_fn_trace() by making a helper
function print_fn_trace() and use it for trace_func_repeats_print().
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
If the option is activated the function tracing record gets
consolidated in the cases when a single function is called number
of times consecutively. Instead of having an identical record for
each call of the function we will record only the first call
following by event showing the number of repeats.
Link: https://lkml.kernel.org/r/20210415181854.147448-7-y.karadz@gmail.com
Signed-off-by: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Currently the logic for dealing with the options for function tracing
has two different implementations. One is used when we set the flags
(in "static int func_set_flag()") and another used when we initialize
the tracer (in "static int function_trace_init()"). Those two
implementations are meant to do essentially the same thing and they
are both not very convenient for adding new options. In this patch
we add a helper function that provides a single implementation of
the logic for dealing with the options and we make it such that new
options can be easily added.
Link: https://lkml.kernel.org/r/20210415181854.147448-6-y.karadz@gmail.com
Signed-off-by: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
This patch only provides the implementation of the method.
Later we will used it in a combination with a new option for
function tracing.
Link: https://lkml.kernel.org/r/20210415181854.147448-5-y.karadz@gmail.com
Signed-off-by: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The field is used to keep track of the consecutive (on the same CPU) calls
of a single function. This information is needed in order to consolidate
the function tracing record in the cases when a single function is called
number of times.
Link: https://lkml.kernel.org/r/20210415181854.147448-4-y.karadz@gmail.com
Signed-off-by: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The event aims to consolidate the function tracing record in the cases
when a single function is called number of times consecutively.
while (cond)
do_func();
This may happen in various scenarios (busy waiting for example).
The new ftrace event can be used to show repeated function events with
a single event and save space on the ring buffer
Link: https://lkml.kernel.org/r/20210415181854.147448-3-y.karadz@gmail.com
Signed-off-by: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The part of the code that prints the time of the trace record in
"int trace_print_context()" gets extracted in a static function. This
is done as a preparation for a following patch, in which we will define
a new ftrace event called "func_repeats". The new static method,
defined here, will be used by this new event to print the time of the
last repeat of a function that is consecutively called number of times.
Link: https://lkml.kernel.org/r/20210415181854.147448-2-y.karadz@gmail.com
Signed-off-by: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
An error path exited the function before freeing the allocated
"argv" variable.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYHY3LRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qigOAPwOvbUI9PQTW3hs16XHDGbgtzdzX6A7
kF7GlId5tXbZDwD/bW2gilFCjULCEPDuqsDy5EXrbZ7V7kulOfIw2e8CAQM=
=HwKu
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"Fix a memory link in dyn_event_release().
An error path exited the function before freeing the allocated 'argv'
variable"
* tag 'trace-v5.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing/dynevent: Fix a memory leak in an error handling path
KMSAN complains that new_value at cpumask_parse_user() from
write_irq_affinity() from irq_affinity_proc_write() is uninitialized.
[ 148.133411][ T5509] =====================================================
[ 148.135383][ T5509] BUG: KMSAN: uninit-value in find_next_bit+0x325/0x340
[ 148.137819][ T5509]
[ 148.138448][ T5509] Local variable ----new_value.i@irq_affinity_proc_write created at:
[ 148.140768][ T5509] irq_affinity_proc_write+0xc3/0x3d0
[ 148.142298][ T5509] irq_affinity_proc_write+0xc3/0x3d0
[ 148.143823][ T5509] =====================================================
Since bitmap_parse() from cpumask_parse_user() calls find_next_bit(),
any alloc_cpumask_var() + cpumask_parse_user() sequence has possibility
that find_next_bit() accesses uninitialized cpu mask variable. Fix this
problem by replacing alloc_cpumask_var() with zalloc_cpumask_var().
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20210401055823.3929-1-penguin-kernel@I-love.SAKURA.ne.jp
Conflicts:
MAINTAINERS
- keep Chandrasekar
drivers/net/ethernet/mellanox/mlx5/core/en_main.c
- simple fix + trust the code re-added to param.c in -next is fine
include/linux/bpf.h
- trivial
include/linux/ethtool.h
- trivial, fix kdoc while at it
include/linux/skmsg.h
- move to relevant place in tcp.c, comment re-wrapped
net/core/skmsg.c
- add the sk = sk // sk = NULL around calls
net/tipc/crypto.c
- trivial
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The macro that creates both the structure and the format displayed
to user space for the stack trace event was changed a while ago
to fix the parsing by user space tooling. But this change also modified
the structure used to store the stack trace event. It changed the
caller array field from [0] to [8]. Even though the size in the ring
buffer is dynamic and can be something other than 8 (user space knows
how to handle this), the 8 extra words was not accounted for when
reserving the event on the ring buffer, and added 8 more entries, due
to the calculation of "sizeof(*entry) + nr_entries * sizeof(long)",
as the sizeof(*entry) now contains 8 entries. The size of the caller
field needs to be subtracted from the size of the entry to create
the correct allocation size.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYGccURQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qiboAPwNM1q8A7EFLDGfj+3tXksvp4H3hXd3
ErMd2OMlsNQtRAD9GGmYyt2OtFdxZWzKOSEC07vdxq2TYTz50mqJM81YbgE=
=7hwx
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.12-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"Fix stack trace entry size to stop showing garbage
The macro that creates both the structure and the format displayed to
user space for the stack trace event was changed a while ago to fix
the parsing by user space tooling. But this change also modified the
structure used to store the stack trace event. It changed the caller
array field from [0] to [8].
Even though the size in the ring buffer is dynamic and can be
something other than 8 (user space knows how to handle this), the 8
extra words was not accounted for when reserving the event on the ring
buffer, and added 8 more entries, due to the calculation of
"sizeof(*entry) + nr_entries * sizeof(long)", as the sizeof(*entry)
now contains 8 entries.
The size of the caller field needs to be subtracted from the size of
the entry to create the correct allocation size"
* tag 'trace-v5.12-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix stack trace event size
Commit b40c6eabfc ("ftrace: Simplify the calculation of page number for
ftrace_page->records") simplified the calculation of the number of pages
needed for each page group without having any empty pages, but it can be
simplified even further.
Link: https://lore.kernel.org/lkml/CAHk-=wjt9b7kxQ2J=aDNKbR1QBMB3Hiqb_hYcZbKsxGRSEb+gQ@mail.gmail.com/
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Instead of saving the size of the records field of the ftrace_page, store
the order it uses to allocate the pages, as that is what is needed to know
in order to free the pages. This simplifies the code.
Link: https://lore.kernel.org/lkml/CAHk-=whyMxheOqXAORt9a7JK9gc9eHTgCJ55Pgs4p=X3RrQubQ@mail.gmail.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[ change log written by Steven Rostedt ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Needed to merge trace/ftrace/urgent to get:
Commit 59300b36f8 ("ftrace: Check if pages were allocated before calling free_pages()")
To clean up the code that is affected by it as well.
Commit cbc3b92ce0 fixed an issue to modify the macros of the stack trace
event so that user space could parse it properly. Originally the stack
trace format to user space showed that the called stack was a dynamic
array. But it is not actually a dynamic array, in the way that other
dynamic event arrays worked, and this broke user space parsing for it. The
update was to make the array look to have 8 entries in it. Helper
functions were added to make it parse it correctly, as the stack was
dynamic, but was determined by the size of the event stored.
Although this fixed user space on how it read the event, it changed the
internal structure used for the stack trace event. It changed the array
size from [0] to [8] (added 8 entries). This increased the size of the
stack trace event by 8 words. The size reserved on the ring buffer was the
size of the stack trace event plus the number of stack entries found in
the stack trace. That commit caused the amount to be 8 more than what was
needed because it did not expect the caller field to have any size. This
produced 8 entries of garbage (and reading random data) from the stack
trace event:
<idle>-0 [002] d... 1976396.837549: <stack trace>
=> trace_event_raw_event_sched_switch
=> __traceiter_sched_switch
=> __schedule
=> schedule_idle
=> do_idle
=> cpu_startup_entry
=> secondary_startup_64_no_verify
=> 0xc8c5e150ffff93de
=> 0xffff93de
=> 0
=> 0
=> 0xc8c5e17800000000
=> 0x1f30affff93de
=> 0x00000004
=> 0x200000000
Instead, subtract the size of the caller field from the size of the event
to make sure that only the amount needed to store the stack trace is
reserved.
Link: https://lore.kernel.org/lkml/your-ad-here.call-01617191565-ext-9692@work.hours/
Cc: stable@vger.kernel.org
Fixes: cbc3b92ce0 ("tracing: Set kernel_stack's caller size properly")
Reported-by: Vasily Gorbik <gor@linux.ibm.com>
Tested-by: Vasily Gorbik <gor@linux.ibm.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The function addresses that are traced by ftrace are stored in pages,
and the size is held in a variable. If there's some error in creating
them, the allocate ones will be freed. In this case, it is possible that
the order of pages to be freed may end up being negative due to a size of
zero passed to get_count_order(), and then that negative number will cause
free_pages() to free a very large section. Make sure that does not happen.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYGR30BQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qnbDAP9yEhTLcDRUi3VLWnEq19Dt4Lsg86Bf
QRpbWG6Ze9EbZQEAgYAOe1fsNCNEIMXXh/4nlKVpKKH+vviS0ux9Z6uhpQQ=
=Veyq
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull ftrace fix from Steven Rostedt:
"Add check of order < 0 before calling free_pages()
The function addresses that are traced by ftrace are stored in pages,
and the size is held in a variable. If there's some error in creating
them, the allocate ones will be freed. In this case, it is possible
that the order of pages to be freed may end up being negative due to a
size of zero passed to get_count_order(), and then that negative
number will cause free_pages() to free a very large section.
Make sure that does not happen"
* tag 'trace-v5.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace: Check if pages were allocated before calling free_pages()
It is possible that on error pg->size can be zero when getting its order,
which would return a -1 value. It is dangerous to pass in an order of -1
to free_pages(). Check if order is greater than or equal to zero before
calling free_pages().
Link: https://lore.kernel.org/lkml/20210330093916.432697c7@gandalf.local.home/
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
It is a common mistake for someone writing a trace event to save a pointer
to a string in the TP_fast_assign() and then display that string pointer
in the TP_printk() with %s. The problem is that those two events may happen
a long time apart, where the source of the string may no longer exist.
The proper way to handle displaying any string that is not guaranteed to be
in the kernel core rodata section, is to copy it into the ring buffer via
the __string(), __assign_str() and __get_str() helper macros.
Add a check at run time while displaying the TP_printk() of events to make
sure that every %s referenced is safe to dereference, and if it is not,
trigger a warning and only show the address of the pointer, and the
dereferenced string if it can be safely retrieved with a
strncpy_from_kernel_nofault() call.
In order to not have to copy the parsing of vsnprintf() formats, or even
exporting its code, the verifier relies on vsnprintf() being able to
modify the va_list that is passed to it, and it remains modified after it
is called. This is the case for some architectures like x86_64, but other
architectures like x86_32 pass the va_list to vsnprintf() as a value not a
reference, and the verifier can not use it to parse the non string
arguments. Thus, at boot up, it is checked if vsnprintf() modifies the
passed in va_list or not, and a static branch will disable the verifier if
it's not compatible.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Trace events record data into the ring buffer at the time of the event. The
trace event has a printf logic to display the recorded data at a much later
time when the user reads the trace file. This makes using dereferencing
pointers unsafe if the dereferenced pointer points to the original source.
The safe way to handle this is to create an array within the trace event and
copy the source into the array. Then the dereference pointer may point to
that array.
As this is a easy mistake to make, a check is added to examine all trace
event print fmts to make sure that they are safe to use. This only checks
the various %p* dereferenced pointers like %pB, %pR, etc. It does not handle
dereferencing of strings, as there are some use cases that are OK to
dereference the source. That will be dealt with differently.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add a tracing_event_time_stamp() API that checks if the event passed in is
not on the ring buffer but a pointer to the per CPU trace_buffered_event
which does not have its time stamp set yet.
If it is a pointer to the trace_buffered_event, then just return the
current time stamp that the ring buffer would produce.
Otherwise, return the time stamp from the event.
Link: https://lkml.kernel.org/r/20210316164114.131996180@goodmis.org
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The ring_buffer_event_time_stamp() must be only called by an event that has
not been committed yet, and is on the buffer that is passed in. This was
used to help debug converting the histogram logic over to using the new
time stamp code, and was proven to be very useful.
Add a verifier that can check that this is the case, and extra WARN_ONs to
catch unexpected use cases.
Link: https://lkml.kernel.org/r/20210316164113.987294354@goodmis.org
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Currently, the trace histograms relies on it using absolute time stamps to
trigger the tracing to not use the temp buffer if filters are set. That's
because the histograms need the full timestamp that is saved in the ring
buffer. That is no longer the case, as the ring_buffer_event_time_stamp()
can now return the time stamp for all events without all triggering a full
absolute time stamp.
Now that the absolute time stamp is an unrelated dependency to not using
the filters. There's nothing about having absolute timestamps to keep from
using the filter buffer. Instead, change the interface to explicitly state
to disable filter buffering that the histogram logic can use.
Link: https://lkml.kernel.org/r/20210316164113.847886563@goodmis.org
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Currently, ring_buffer_event_time_stamp() only returns an accurate time
stamp of the event if it has an absolute extended time stamp attached to
it. To make it more robust, use the event_stamp() in case the event does
not have an absolute value attached to it.
This will allow ring_buffer_event_time_stamp() to be used in more cases
than just histograms, and it will also allow histograms to not require
including absolute values all the time.
Link: https://lkml.kernel.org/r/20210316164113.704830885@goodmis.org
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The ring_buffer_event_time_stamp() is going to be updated to extract the
time stamp for the event without needing it to be set to have absolute
values for all events. But to do so, it needs the buffer that the event is
on as the buffer saves information for the event before it is committed to
the buffer.
If the trace buffer is disabled, a temporary buffer is used, and there's
no access to this buffer from the current histogram triggers, even though
it is passed to the trace event code.
Pass the buffer that the event is on all the way down to the histogram
triggers.
Link: https://lkml.kernel.org/r/20210316164113.542448131@goodmis.org
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add a place to save the current event time stamp for each level of nesting.
This will be used to retrieve the time stamp of the current event before it
is committed.
Link: https://lkml.kernel.org/r/20210316164113.399089673@goodmis.org
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The exported use of ring_buffer_event_time_stamp() is going to become
different than how it is used internally. Move the internal logic out into a
static function called rb_event_time_stamp(), and have the internal callers
call that instead.
Link: https://lkml.kernel.org/r/20210316164113.257790481@goodmis.org
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The following sequence of commands:
register_ftrace_direct(ip, addr1);
modify_ftrace_direct(ip, addr1, addr2);
unregister_ftrace_direct(ip, addr2);
will cause the kernel to warn:
[ 30.179191] WARNING: CPU: 2 PID: 1961 at kernel/trace/ftrace.c:5223 unregister_ftrace_direct+0x130/0x150
[ 30.180556] CPU: 2 PID: 1961 Comm: test_progs W O 5.12.0-rc2-00378-g86bc10a0a711-dirty #3246
[ 30.182453] RIP: 0010:unregister_ftrace_direct+0x130/0x150
When modify_ftrace_direct() changes the addr from old to new it should update
the addr stored in ftrace_direct_funcs. Otherwise the final
unregister_ftrace_direct() won't find the address and will cause the splat.
Fixes: 0567d68091 ("ftrace: Add modify_ftrace_direct()")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lore.kernel.org/bpf/20210316195815.34714-1-alexei.starovoitov@gmail.com
Steven Rostedt (VMware)
Linus Torvalds
Florent Revest
David S. Miller
Jakub Kicinski
Yordan Karadzhov (VMware)
Christophe JAILLET
Tetsuo Handa
Qiujun Huang
Bhaskar Chowdhury
Ingo Molnar
Alexei Starovoitov