PKCS#7: Handle certificates that are blacklisted when verifying the chain
of trust on the signatures on a PKCS#7 message.
Signed-off-by: David Howells <dhowells@redhat.com>
Allow X.509 certs to be blacklisted based on their TBSCertificate hash.
This is convenient since we have to determine this anyway to be able to
check the signature on an X.509 certificate. This is also what UEFI uses
in its blacklist.
If a certificate built into the kernel is blacklisted, something like the
following might then be seen during boot:
X.509: Cert 123412341234c55c1dcc601ab8e172917706aa32fb5eaf826813547fdf02dd46 is blacklisted
Problem loading in-kernel X.509 certificate (-129)
where the hex string shown is the blacklisted hash.
Signed-off-by: David Howells <dhowells@redhat.com>
Pull crypto fixes from Herbert Xu:
"This fixes the following issues:
- a crash regression in the new skcipher walker
- incorrect return value in public_key_verify_signature
- fix for in-place signing in the sign-file utility"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: skcipher - fix crash in virtual walk
sign-file: Fix inplace signing when src and dst names are both specified
crypto: asymmetric_keys - set error code on failure
In function public_key_verify_signature(), returns variable ret on
error paths. When the call to kmalloc() fails, the value of ret is 0,
and it is not set to an errno before returning. This patch fixes the
bug.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=188891
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Arbitrary X.509 certificates without authority key identifiers (AKIs)
can be added to "trusted" keyrings, including IMA or EVM certs loaded
from the filesystem. Signature verification is currently bypassed for
certs without AKIs.
Trusted keys were recently refactored, and this bug is not present in
4.6.
restrict_link_by_signature should return -ENOKEY (no matching parent
certificate found) if the certificate being evaluated has no AKIs,
instead of bypassing signature checks and returning 0 (new certificate
accepted).
Reported-by: Petko Manolov <petkan@mip-labs.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Commit e68503bd68 forgot to set digest_len and thus cause the following
error reported by kexec when launching a crash kernel:
kexec_file_load failed: Bad message
Fixes: e68503bd68 (KEYS: Generalise system_verify_data() to provide access to internal content)
Signed-off-by: Lans Zhang <jia.zhang@windriver.com>
Tested-by: Dave Young <dyoung@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
cc: kexec@lists.infradead.org
cc: linux-crypto@vger.kernel.org
Signed-off-by: James Morris <james.l.morris@oracle.com>
Pull crypto fixes from Herbert Xu:
"This fixes the following issues:
- missing selection in public_key that may result in a build failure
- Potential crash in error path in omap-sham
- ccp AES XTS bug that affects requests larger than 4096"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: ccp - Fix AES XTS error for request sizes above 4096
crypto: public_key: select CRYPTO_AKCIPHER
crypto: omap-sham - potential Oops on error in probe
In some rare randconfig builds, we can end up with
ASYMMETRIC_PUBLIC_KEY_SUBTYPE enabled but CRYPTO_AKCIPHER disabled,
which fails to link because of the reference to crypto_alloc_akcipher:
crypto/built-in.o: In function `public_key_verify_signature':
:(.text+0x110e4): undefined reference to `crypto_alloc_akcipher'
This adds a Kconfig 'select' statement to ensure the dependency
is always there.
Cc: <stable@vger.kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The PKCS#7 test key type should use the secondary keyring instead of the
built-in keyring if available as the source of trustworthy keys.
Signed-off-by: David Howells <dhowells@redhat.com>
Move the point at which a key is determined to be trustworthy to
__key_link() so that we use the contents of the keyring being linked in to
to determine whether the key being linked in is trusted or not.
What is 'trusted' then becomes a matter of what's in the keyring.
Currently, the test is done when the key is parsed, but given that at that
point we can only sensibly refer to the contents of the system trusted
keyring, we can only use that as the basis for working out the
trustworthiness of a new key.
With this change, a trusted keyring is a set of keys that once the
trusted-only flag is set cannot be added to except by verification through
one of the contained keys.
Further, adding a key into a trusted keyring, whilst it might grant
trustworthiness in the context of that keyring, does not automatically
grant trustworthiness in the context of a second keyring to which it could
be secondarily linked.
To accomplish this, the authentication data associated with the key source
must now be retained. For an X.509 cert, this means the contents of the
AuthorityKeyIdentifier and the signature data.
If system keyrings are disabled then restrict_link_by_builtin_trusted()
resolves to restrict_link_reject(). The integrity digital signature code
still works correctly with this as it was previously using
KEY_FLAG_TRUSTED_ONLY, which doesn't permit anything to be added if there
is no system keyring against which trust can be determined.
Signed-off-by: David Howells <dhowells@redhat.com>
Make the system trusted keyring depend on the asymmetric key type as
there's not a lot of point having it if you can't then load asymmetric keys
onto it.
This requires the ASYMMETRIC_KEY_TYPE to be made a bool, not a tristate, as
the Kconfig language doesn't then correctly force ASYMMETRIC_KEY_TYPE to
'y' rather than 'm' if SYSTEM_TRUSTED_KEYRING is 'y'.
Making SYSTEM_TRUSTED_KEYRING *select* ASYMMETRIC_KEY_TYPE instead doesn't
work as the Kconfig interpreter then wrongly complains about dependency
loops.
Signed-off-by: David Howells <dhowells@redhat.com>
We should call verify_signature() rather than directly calling
public_key_verify_signature() if we have a struct key to use as we
shouldn't be poking around in the private data of the key struct as that's
subtype dependent.
Signed-off-by: David Howells <dhowells@redhat.com>
Generalise x509_request_asymmetric_key(). It doesn't really have any
dependencies on X.509 features as it uses generalised IDs and the
public_key structs that contain data extracted from X.509.
Signed-off-by: David Howells <dhowells@redhat.com>
Make the determination of the trustworthiness of a key dependent on whether
a key that can verify it is present in the supplied ring of trusted keys
rather than whether or not the verifying key has KEY_FLAG_TRUSTED set.
verify_pkcs7_signature() will return -ENOKEY if the PKCS#7 message trust
chain cannot be verified.
Signed-off-by: David Howells <dhowells@redhat.com>
Generalise system_verify_data() to provide access to internal content
through a callback. This allows all the PKCS#7 stuff to be hidden inside
this function and removed from the PE file parser and the PKCS#7 test key.
If external content is not required, NULL should be passed as data to the
function. If the callback is not required, that can be set to NULL.
The function is now called verify_pkcs7_signature() to contrast with
verify_pefile_signature() and the definitions of both have been moved into
linux/verification.h along with the key_being_used_for enum.
Signed-off-by: David Howells <dhowells@redhat.com>
There's a bug in the code determining whether a certificate is self-signed
or not: if they have neither AKID nor SKID then we just assume that the
cert is self-signed, which may not be true.
Fix this by checking that the raw subject name matches the raw issuer name
and that the public key algorithm for the key and signature are both the
same in addition to requiring that the AKID bits match.
Signed-off-by: David Howells <dhowells@redhat.com>
Extract the signature digest for an X.509 certificate earlier, at the end
of x509_cert_parse() rather than leaving it to the callers thereof since it
has to be called anyway.
Further, immediately after that, check the signature on self-signed
certificates, also rather in the callers of x509_cert_parse().
We note in the x509_certificate struct the following bits of information:
(1) Whether the signature is self-signed (even if we can't check the
signature due to missing crypto).
(2) Whether the key held in the certificate needs unsupported crypto to be
used. We may get a PKCS#7 message with X.509 certs that we can't make
use of - we just ignore them and give ENOPKG at the end it we couldn't
verify anything if at least one of these unusable certs are in the
chain of trust.
(3) Whether the signature held in the certificate needs unsupported crypto
to be checked. We can still use the key held in this certificate,
even if we can't check the signature on it - if it is held in the
system trusted keyring, for instance. We just can't add it to a ring
of trusted keys or follow it further up the chain of trust.
Making these checks earlier allows x509_check_signature() to be removed and
replaced with direct calls to public_key_verify_signature().
Signed-off-by: David Howells <dhowells@redhat.com>
Point to the public_key_signature struct from the pkcs7_signed_info struct
rather than embedding it. This makes the code consistent with the X.509
signature handling and makes it possible to have a common cleanup function.
We also save a copy of the digest in the signature without sharing the
memory with the crypto layer metadata.
Signed-off-by: David Howells <dhowells@redhat.com>
Retain the key verification data (ie. the struct public_key_signature)
including the digest and the key identifiers.
Note that this means that we need to take a separate copy of the digest in
x509_get_sig_params() rather than lumping it in with the crypto layer data.
Signed-off-by: David Howells <dhowells@redhat.com>
Add key identifier pointers to public_key_signature struct so that they can
be used to retain the identifier of the key to be used to verify the
signature in both PKCS#7 and X.509.
Signed-off-by: David Howells <dhowells@redhat.com>
Allow authentication data to be stored in an asymmetric key in the 4th
element of the key payload and provide a way for it to be destroyed.
For the public key subtype, this will be a public_key_signature struct.
Signed-off-by: David Howells <dhowells@redhat.com>
The OID_sha224 case is missing a break and it falls through
to the -ENOPKG error default. Since HASH_ALGO_SHA224 seems
to be supported, this looks like an unintentional missing break.
Fixes: 07f081fb50 ("PKCS#7: Add OIDs for sha224, sha284 and sha512 hash algos and use them")
Cc: <stable@vger.kernel.org> # 4.2+
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull crypto fix from Herbert Xu:
"This fixes a bug in pkcs7_validate_trust and its users where the
output value may in fact be taken from uninitialised memory"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
PKCS#7: pkcs7_validate_trust(): initialize the _trusted output argument
Despite what the DocBook comment to pkcs7_validate_trust() says, the
*_trusted argument is never set to false.
pkcs7_validate_trust() only positively sets *_trusted upon encountering
a trusted PKCS#7 SignedInfo block.
This is quite unfortunate since its callers, system_verify_data() for
example, depend on pkcs7_validate_trust() clearing *_trusted on non-trust.
Indeed, UBSAN splats when attempting to load the uninitialized local
variable 'trusted' from system_verify_data() in pkcs7_validate_trust():
UBSAN: Undefined behaviour in crypto/asymmetric_keys/pkcs7_trust.c:194:14
load of value 82 is not a valid value for type '_Bool'
[...]
Call Trace:
[<ffffffff818c4d35>] dump_stack+0xbc/0x117
[<ffffffff818c4c79>] ? _atomic_dec_and_lock+0x169/0x169
[<ffffffff8194113b>] ubsan_epilogue+0xd/0x4e
[<ffffffff819419fa>] __ubsan_handle_load_invalid_value+0x111/0x158
[<ffffffff819418e9>] ? val_to_string.constprop.12+0xcf/0xcf
[<ffffffff818334a4>] ? x509_request_asymmetric_key+0x114/0x370
[<ffffffff814b83f0>] ? kfree+0x220/0x370
[<ffffffff818312c2>] ? public_key_verify_signature_2+0x32/0x50
[<ffffffff81835e04>] pkcs7_validate_trust+0x524/0x5f0
[<ffffffff813c391a>] system_verify_data+0xca/0x170
[<ffffffff813c3850>] ? top_trace_array+0x9b/0x9b
[<ffffffff81510b29>] ? __vfs_read+0x279/0x3d0
[<ffffffff8129372f>] mod_verify_sig+0x1ff/0x290
[...]
The implication is that pkcs7_validate_trust() effectively grants trust
when it really shouldn't have.
Fix this by explicitly setting *_trusted to false at the very beginning
of pkcs7_validate_trust().
Cc: <stable@vger.kernel.org>
Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Make the identifier public key and digest algorithm fields text instead of
enum.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Move the RSA EMSA-PKCS1-v1_5 encoding from the asymmetric-key public_key
subtype to the rsa crypto module's pkcs1pad template. This means that the
public_key subtype no longer has any dependencies on public key type.
To make this work, the following changes have been made:
(1) The rsa pkcs1pad template is now used for RSA keys. This strips off the
padding and returns just the message hash.
(2) In a previous patch, the pkcs1pad template gained an optional second
parameter that, if given, specifies the hash used. We now give this,
and pkcs1pad checks the encoded message E(M) for the EMSA-PKCS1-v1_5
encoding and verifies that the correct digest OID is present.
(3) The crypto driver in crypto/asymmetric_keys/rsa.c is now reduced to
something that doesn't care about what the encryption actually does
and and has been merged into public_key.c.
(4) CONFIG_PUBLIC_KEY_ALGO_RSA is gone. Module signing must set
CONFIG_CRYPTO_RSA=y instead.
Thoughts:
(*) Should the encoding style (eg. raw, EMSA-PKCS1-v1_5) also be passed to
the padding template? Should there be multiple padding templates
registered that share most of the code?
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
The ASN.1 GeneralizedTime object carries an ISO 8601 format date and time.
The time is permitted to show midnight as 00:00 or 24:00 (the latter being
equivalent of 00:00 of the following day).
The permitted value is checked in x509_decode_time() but the actual
handling is left to mktime64().
Without this patch, certain X.509 certificates will be rejected and could
lead to an unbootable kernel.
Note that with this patch we also permit any 24:mm:ss time and extend this
to UTCTime, which whilst not strictly correct don't permit much leeway in
fiddling date strings.
Reported-by: Rudolf Polzer <rpolzer@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
cc: David Woodhouse <David.Woodhouse@intel.com>
cc: John Stultz <john.stultz@linaro.org>
The format of ASN.1 GeneralizedTime seems to be specified by ISO 8601
[X.680 46.3] and this apparently supports leap seconds (ie. the seconds
field is 60). It's not entirely clear that ASN.1 expects it, but we can
relax the seconds check slightly for GeneralizedTime.
This results in us passing a time with sec as 60 to mktime64(), which
handles it as being a duplicate of the 0th second of the next minute.
We can't really do otherwise without giving the kernel much greater
knowledge of where all the leap seconds are. Unfortunately, this would
require change the mapping of the kernel's current-time-in-seconds.
UTCTime, however, only supports a seconds value in the range 00-59, but for
the sake of simplicity allow this with UTCTime also.
Without this patch, certain X.509 certificates will be rejected,
potentially making a kernel unbootable.
Reported-by: Rudolf Polzer <rpolzer@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
cc: David Woodhouse <David.Woodhouse@intel.com>
cc: John Stultz <john.stultz@linaro.org>
There are still a couple of minor issues in the X.509 leap year handling:
(1) To avoid doing a modulus-by-400 in addition to a modulus-by-100 when
determining whether the year is a leap year or not, I divided the year
by 100 after doing the modulus-by-100, thereby letting the compiler do
one instruction for both, and then did a modulus-by-4.
Unfortunately, I then passed the now-modified year value to mktime64()
to construct a time value.
Since this isn't a fast path and since mktime64() does a bunch of
divisions, just condense down to "% 400". It's also easier to read.
(2) The default month length for any February where the year doesn't
divide by four exactly is obtained from the month_length[] array where
the value is 29, not 28.
This is fixed by altering the table.
Reported-by: Rudolf Polzer <rpolzer@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: David Woodhouse <David.Woodhouse@intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
cc: stable@vger.kernel.org
The boolean want is not initialized and hence garbage. The default should
be false (later it is only set to true on tne sinfo->authattrs check).
Found with static analysis using CoverityScan
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David Howells <dhowells@redhat.com>
This patch converts the module verification code to the new akcipher API.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David Howells <dhowells@redhat.com>
This patch converts the module verification code to the new akcipher API.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Dave Young reported:
> Hi,
>
> I saw the warning "Missing required AuthAttr" when testing kexec,
> known issue? Idea about how to fix it?
>
> The kernel is latest linus tree plus sevral patches from Toshi to
> cleanup io resource structure.
>
> in function pkcs7_sig_note_set_of_authattrs():
> if (!test_bit(sinfo_has_content_type, &sinfo->aa_set) ||
> !test_bit(sinfo_has_message_digest, &sinfo->aa_set) ||
> (ctx->msg->data_type == OID_msIndirectData &&
> !test_bit(sinfo_has_ms_opus_info, &sinfo->aa_set))) {
> pr_warn("Missing required AuthAttr\n");
> return -EBADMSG;
> }
>
> The third condition below is true:
> (ctx->msg->data_type == OID_msIndirectData &&
> !test_bit(sinfo_has_ms_opus_info, &sinfo->aa_set))
>
> I signed the kernel with redhat test key like below:
> pesign -c 'Red Hat Test Certificate' -i arch/x86/boot/bzImage -o /boot/vmlinuz-4.4.0-rc8+ -s --force
And right he is! The Authenticode specification is a paragon amongst
technical documents, and has this pearl of wisdom to offer:
---------------------------------
Authenticode-Specific SignerInfo UnauthenticatedAttributes Structures
The following Authenticode-specific data structures are present in
SignerInfo authenticated attributes.
SpcSpOpusInfo
SpcSpOpusInfo is identified by SPC_SP_OPUS_INFO_OBJID
(1.3.6.1.4.1.311.2.1.12) and is defined as follows:
SpcSpOpusInfo ::= SEQUENCE {
programName [0] EXPLICIT SpcString OPTIONAL,
moreInfo [1] EXPLICIT SpcLink OPTIONAL,
} --#public--
SpcSpOpusInfo has two fields:
programName
This field contains the program description:
If publisher chooses not to specify a description, the SpcString
structure contains a zero-length program name.
If the publisher chooses to specify a
description, the SpcString structure contains a Unicode string.
moreInfo
This field is set to an SPCLink structure that contains a URL for
a Web site with more information about the signer. The URL is an
ASCII string.
---------------------------------
Which is to say that this is an optional *unauthenticated* field which
may be present in the Authenticated Attribute list. This is not how
pkcs7 is supposed to work, so when David implemented this, he didn't
appreciate the subtlety the original spec author was working with, and
missed the part of the sublime prose that says this Authenticated
Attribute is an Unauthenticated Attribute. As a result, the code in
question simply takes as given that the Authenticated Attributes should
be authenticated.
But this one should not, individually. Because it says it's not
authenticated.
It still has to hash right so the TBS digest is correct. So it is both
authenticated and unauthenticated, all at once. Truly, a wonder of
technical accomplishment.
Additionally, pesign's implementation has always attempted to be
compatible with the signatures emitted from contemporary versions of
Microsoft's signtool.exe. During the initial implementation, Microsoft
signatures always produced the same values for SpcSpOpusInfo -
{U"Microsoft Windows", "http://www.microsoft.com"} - without regard to
who the signer was.
Sometime between Windows 8 and Windows 8.1 they stopped including the
field in their signatures altogether, and as such pesign stopped
producing them in commits c0c4da6 and d79cb0c, sometime around June of
2012. The theory here is that anything that breaks with
pesign signatures would also be breaking with signtool.exe sigs as well,
and that'll be a more noticed problem for firmwares parsing it, so it'll
get fixed. The fact that we've done exactly this bug in Linux code is
first class, grade A irony.
So anyway, we should not be checking this field for presence or any
particular value: if the field exists, it should be at the right place,
but aside from that, as long as the hash matches the field is good.
Signed-off-by: Peter Jones <pjones@redhat.com>
Tested-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull security subsystem updates from James Morris:
- EVM gains support for loading an x509 cert from the kernel
(EVM_LOAD_X509), into the EVM trusted kernel keyring.
- Smack implements 'file receive' process-based permission checking for
sockets, rather than just depending on inode checks.
- Misc enhancments for TPM & TPM2.
- Cleanups and bugfixes for SELinux, Keys, and IMA.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (41 commits)
selinux: Inode label revalidation performance fix
KEYS: refcount bug fix
ima: ima_write_policy() limit locking
IMA: policy can be updated zero times
selinux: rate-limit netlink message warnings in selinux_nlmsg_perm()
selinux: export validatetrans decisions
gfs2: Invalid security labels of inodes when they go invalid
selinux: Revalidate invalid inode security labels
security: Add hook to invalidate inode security labels
selinux: Add accessor functions for inode->i_security
security: Make inode argument of inode_getsecid non-const
security: Make inode argument of inode_getsecurity non-const
selinux: Remove unused variable in selinux_inode_init_security
keys, trusted: seal with a TPM2 authorization policy
keys, trusted: select hash algorithm for TPM2 chips
keys, trusted: fix: *do not* allow duplicate key options
tpm_ibmvtpm: properly handle interrupted packet receptions
tpm_tis: Tighten IRQ auto-probing
tpm_tis: Refactor the interrupt setup
tpm_tis: Get rid of the duplicate IRQ probing code
...
This option creates IMA MOK and blacklist keyrings. IMA MOK is an
intermediate keyring that sits between .system and .ima keyrings,
effectively forming a simple CA hierarchy. To successfully import a key
into .ima_mok it must be signed by a key which CA is in .system keyring.
On turn any key that needs to go in .ima keyring must be signed by CA in
either .system or .ima_mok keyrings. IMA MOK is empty at kernel boot.
IMA blacklist keyring contains all revoked IMA keys. It is consulted
before any other keyring. If the search is successful the requested
operation is rejected and error is returned to the caller.
Signed-off-by: Petko Manolov <petkan@mip-labs.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
This file does not contain any modular related function calls. So get
rid of module.h since it drags in a lot of other headers and adds to
the preprocessing load. It does export some symbols though, so we'll
need to ensure it has export.h present instead.
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This fixes CVE-2015-5327. It affects kernels from 4.3-rc1 onwards.
Fix the X.509 time validation to use month number-1 when looking up the
number of days in that month. Also put the month number validation before
doing the lookup so as not to risk overrunning the array.
This can be tested by doing the following:
cat <<EOF | openssl x509 -outform DER | keyctl padd asymmetric "" @s
-----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----
EOF
If it works, it emit a key ID; if it fails, it should give a bad message
error.
Reported-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Acked-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Pull security subsystem update from James Morris:
"This is mostly maintenance updates across the subsystem, with a
notable update for TPM 2.0, and addition of Jarkko Sakkinen as a
maintainer of that"
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (40 commits)
apparmor: clarify CRYPTO dependency
selinux: Use a kmem_cache for allocation struct file_security_struct
selinux: ioctl_has_perm should be static
selinux: use sprintf return value
selinux: use kstrdup() in security_get_bools()
selinux: use kmemdup in security_sid_to_context_core()
selinux: remove pointless cast in selinux_inode_setsecurity()
selinux: introduce security_context_str_to_sid
selinux: do not check open perm on ftruncate call
selinux: change CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE default
KEYS: Merge the type-specific data with the payload data
KEYS: Provide a script to extract a module signature
KEYS: Provide a script to extract the sys cert list from a vmlinux file
keys: Be more consistent in selection of union members used
certs: add .gitignore to stop git nagging about x509_certificate_list
KEYS: use kvfree() in add_key
Smack: limited capability for changing process label
TPM: remove unnecessary little endian conversion
vTPM: support little endian guests
char: Drop owner assignment from i2c_driver
...
Pull crypto update from Herbert Xu:
"API:
- Add support for cipher output IVs in testmgr
- Add missing crypto_ahash_blocksize helper
- Mark authenc and des ciphers as not allowed under FIPS.
Algorithms:
- Add CRC support to 842 compression
- Add keywrap algorithm
- A number of changes to the akcipher interface:
+ Separate functions for setting public/private keys.
+ Use SG lists.
Drivers:
- Add Intel SHA Extension optimised SHA1 and SHA256
- Use dma_map_sg instead of custom functions in crypto drivers
- Add support for STM32 RNG
- Add support for ST RNG
- Add Device Tree support to exynos RNG driver
- Add support for mxs-dcp crypto device on MX6SL
- Add xts(aes) support to caam
- Add ctr(aes) and xts(aes) support to qat
- A large set of fixes from Russell King for the marvell/cesa driver"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (115 commits)
crypto: asymmetric_keys - Fix unaligned access in x509_get_sig_params()
crypto: akcipher - Don't #include crypto/public_key.h as the contents aren't used
hwrng: exynos - Add Device Tree support
hwrng: exynos - Fix missing configuration after suspend to RAM
hwrng: exynos - Add timeout for waiting on init done
dt-bindings: rng: Describe Exynos4 PRNG bindings
crypto: marvell/cesa - use __le32 for hardware descriptors
crypto: marvell/cesa - fix missing cpu_to_le32() in mv_cesa_dma_add_op()
crypto: marvell/cesa - use memcpy_fromio()/memcpy_toio()
crypto: marvell/cesa - use gfp_t for gfp flags
crypto: marvell/cesa - use dma_addr_t for cur_dma
crypto: marvell/cesa - use readl_relaxed()/writel_relaxed()
crypto: caam - fix indentation of close braces
crypto: caam - only export the state we really need to export
crypto: caam - fix non-block aligned hash calculation
crypto: caam - avoid needlessly saving and restoring caam_hash_ctx
crypto: caam - print errno code when hash registration fails
crypto: marvell/cesa - fix memory leak
crypto: marvell/cesa - fix first-fragment handling in mv_cesa_ahash_dma_last_req()
crypto: marvell/cesa - rearrange handling for sw padded hashes
...
x509_get_sig_params() has the same code pattern as the one in
pkcs7_verify() that is fixed by commit 62f57d05e2 ("crypto: pkcs7 - Fix
unaligned access in pkcs7_verify()") so apply a similar fix here: make
sure that desc is pointing at an algined value past the digest_size,
and take alignment values into consideration when doing kzalloc()
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
On sparc, we see unaligned access messages on each modprobe[-r]:
Kernel unaligned access at TPC[6ad9b4] pkcs7_verify [..]
Kernel unaligned access at TPC[6a5484] crypto_shash_finup [..]
Kernel unaligned access at TPC[6a5390] crypto_shash_update [..]
Kernel unaligned access at TPC[10150308] sha1_sparc64_update [..]
Kernel unaligned access at TPC[101501ac] __sha1_sparc64_update [..]
These ware triggered by mod_verify_sig() invocations of pkcs_verify(), and
are are being caused by an unaligned desc at (sha1, digest_size is 0x14)
desc = digest + digest_size;
To fix this, pkcs7_verify needs to make sure that desc is pointing
at an aligned value past the digest_size, and kzalloc appropriately,
taking alignment values into consideration.
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Don't strip leading zeros from the crypto key ID when using it to construct
the struct key description as the signature in kernels up to and including
4.2 matched this aspect of the key. This means that 1 in 256 keys won't
actually match if their key ID begins with 00.
The key ID is stored in the module signature as binary and so must be
converted to text in order to invoke request_key() - but it isn't stripped
at this point.
Something like this is likely to be observed in dmesg when the key is loaded:
[ 1.572423] Loaded X.509 cert 'Build time autogenerated kernel
key: 62a7c3d2da278be024da4af8652c071f3fea33'
followed by this when we try and use it:
[ 1.646153] Request for unknown module key 'Build time autogenerated
kernel key: 0062a7c3d2da278be024da4af8652c071f3fea33' err -11
The 'Loaded' line should show an extra '00' on the front of the hex string.
This problem should not affect 4.3-rc1 and onwards because there the key
should be matched on one of its auxiliary identities rather than the key
struct's description string.
Reported-by: Arjan van de Ven <arjan@linux.intel.com>
Reported-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: David Howells <dhowells@redhat.com>
hour, min and sec are unsigned int and they can never be less than zero.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add OIDs for sha224, sha284 and sha512 hash algos and use them to select
the hashing algorithm. Without this, something like the following error
might get written to dmesg:
[ 31.829322] PKCS7: Unknown OID: [32] 2.16.840.1.101.3.4.2.3
[ 31.829328] PKCS7: Unknown OID: [180] 2.16.840.1.101.3.4.2.3
[ 31.829330] Unsupported digest algo: 55
Where the 55 on the third line is OID__NR indicating an unknown OID.
Reported-by: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-By: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Add a MODULE_LICENSE() line to the PKCS#7 test key module to fix this
warning:
WARNING: modpost: missing MODULE_LICENSE() in
crypto/asymmetric_keys/pkcs7_test_key.o
Whilst we're at it, also add a module description.
Reported-by: James Morris <jmorris@namei.org>
Signed-off-by: David Howells <dhowells@redhat.com>
A PKCS#7 or CMS message can have per-signature authenticated attributes
that are digested as a lump and signed by the authorising key for that
signature. If such attributes exist, the content digest isn't itself
signed, but rather it is included in a special authattr which then
contributes to the signature.
Further, we already require the master message content type to be
pkcs7_signedData - but there's also a separate content type for the data
itself within the SignedData object and this must be repeated inside the
authattrs for each signer [RFC2315 9.2, RFC5652 11.1].
We should really validate the authattrs if they exist or forbid them
entirely as appropriate. To this end:
(1) Alter the PKCS#7 parser to reject any message that has more than one
signature where at least one signature has authattrs and at least one
that does not.
(2) Validate authattrs if they are present and strongly restrict them.
Only the following authattrs are permitted and all others are
rejected:
(a) contentType. This is checked to be an OID that matches the
content type in the SignedData object.
(b) messageDigest. This must match the crypto digest of the data.
(c) signingTime. If present, we check that this is a valid, parseable
UTCTime or GeneralTime and that the date it encodes fits within
the validity window of the matching X.509 cert.
(d) S/MIME capabilities. We don't check the contents.
(e) Authenticode SP Opus Info. We don't check the contents.
(f) Authenticode Statement Type. We don't check the contents.
The message is rejected if (a) or (b) are missing. If the message is
an Authenticode type, the message is rejected if (e) is missing; if
not Authenticode, the message is rejected if (d) - (f) are present.
The S/MIME capabilities authattr (d) unfortunately has to be allowed
to support kernels already signed by the pesign program. This only
affects kexec. sign-file suppresses them (CMS_NOSMIMECAP).
The message is also rejected if an authattr is given more than once or
if it contains more than one element in its set of values.
(3) Add a parameter to pkcs7_verify() to select one of the following
restrictions and pass in the appropriate option from the callers:
(*) VERIFYING_MODULE_SIGNATURE
This requires that the SignedData content type be pkcs7-data and
forbids authattrs. sign-file sets CMS_NOATTR. We could be more
flexible and permit authattrs optionally, but only permit minimal
content.
(*) VERIFYING_FIRMWARE_SIGNATURE
This requires that the SignedData content type be pkcs7-data and
requires authattrs. In future, this will require an attribute
holding the target firmware name in addition to the minimal set.
(*) VERIFYING_UNSPECIFIED_SIGNATURE
This requires that the SignedData content type be pkcs7-data but
allows either no authattrs or only permits the minimal set.
(*) VERIFYING_KEXEC_PE_SIGNATURE
This only supports the Authenticode SPC_INDIRECT_DATA content type
and requires at least an SpcSpOpusInfo authattr in addition to the
minimal set. It also permits an SPC_STATEMENT_TYPE authattr (and
an S/MIME capabilities authattr because the pesign program doesn't
remove these).
(*) VERIFYING_KEY_SIGNATURE
(*) VERIFYING_KEY_SELF_SIGNATURE
These are invalid in this context but are included for later use
when limiting the use of X.509 certs.
(4) The pkcs7_test key type is given a module parameter to select between
the above options for testing purposes. For example:
echo 1 >/sys/module/pkcs7_test_key/parameters/usage
keyctl padd pkcs7_test foo @s </tmp/stuff.pkcs7
will attempt to check the signature on stuff.pkcs7 as if it contains a
firmware blob (1 being VERIFYING_FIRMWARE_SIGNATURE).
Suggested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marcel Holtmann <marcel@holtmann.org>
Reviewed-by: David Woodhouse <David.Woodhouse@intel.com>
Make the X.509 ASN.1 time object decoder fill in a time64_t rather than a
struct tm to make comparison easier (unfortunately, this makes readable
display less easy) and export it so that it can be used by the PKCS#7 code
too.
Further, tighten up its parsing to reject invalid dates (eg. weird
characters, non-existent hour numbers) and unsupported dates (eg. timezones
other than 'Z' or dates earlier than 1970).
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: David Woodhouse <David.Woodhouse@intel.com>
Since CMS is an evolution of PKCS#7, with much of the ASN.1 being
compatible, add support for CMS signed-data messages also [RFC5652 sec 5].
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-By: David Woodhouse <David.Woodhouse@intel.com>
The key identifiers fabricated from an X.509 certificate are currently:
(A) Concatenation of serial number and issuer
(B) Concatenation of subject and subjectKeyID (SKID)
When verifying one X.509 certificate with another, the AKID in the target
can be used to match the authoritative certificate. The AKID can specify
the match in one or both of two ways:
(1) Compare authorityCertSerialNumber and authorityCertIssuer from the AKID
to identifier (A) above.
(2) Compare keyIdentifier from the AKID plus the issuer from the target
certificate to identifier (B) above.
When verifying a PKCS#7 message, the only available comparison is between
the IssuerAndSerialNumber field and identifier (A) above.
However, a subsequent patch adds CMS support. Whilst CMS still supports a
match on IssuerAndSerialNumber as for PKCS#7, it also supports an
alternative - which is the SubjectKeyIdentifier field. This is used to
match to an X.509 certificate on the SKID alone. No subject information is
available to be used.
To this end change the fabrication of (B) above to be from the X.509 SKID
alone. The AKID in keyIdentifier form then only matches on that and does
not include the issuer.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-By: David Woodhouse <David.Woodhouse@intel.com>
We only support PKCS#7 signed-data [RFC2315 sec 9] content at the top level,
so reject anything else. Further, check that the version numbers in
SignedData and SignerInfo are 1 in both cases.
Note that we don't restrict the inner content type. In the PKCS#7 code we
don't parse the data attached there, but merely verify the signature over
it.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-By: David Woodhouse <David.Woodhouse@intel.com>
It is possible for a PKCS#7 message to have detached data. However, to verify
the signatures on a PKCS#7 message, we have to be able to digest the data.
Provide a function to supply that data. An error is given if the PKCS#7
message included embedded data.
This is used in a subsequent patch to supply the data to module signing where
the signature is in the form of a PKCS#7 message with detached data, whereby
the detached data is the module content that is signed.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Vivek Goyal <vgoyal@redhat.com>
If an X.509 certificate has an AuthorityKeyIdentifier extension that provides
an issuer and serialNumber, then make it so that these are used in preference
to the keyIdentifier field also held therein for searching for the signing
certificate.
If both the issuer+serialNumber and the keyIdentifier are supplied, then the
certificate is looked up by the former but the latter is checked as well. If
the latter doesn't match the subjectKeyIdentifier of the parent certificate,
EKEYREJECTED is returned.
This makes it possible to chain X.509 certificates based on the issuer and
serialNumber fields rather than on subjectKeyIdentifier. This is necessary as
we are having to deal with keys that are represented by X.509 certificates
that lack a subjectKeyIdentifier.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Vivek Goyal <vgoyal@redhat.com>
Extract both parts of the AuthorityKeyIdentifier, not just the keyIdentifier,
as the second part can be used to match X.509 certificates by issuer and
serialNumber.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Vivek Goyal <vgoyal@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=qotW
-----END PGP SIGNATURE-----
Merge tag 'module-implicit-v4.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux
Pull implicit module.h fixes from Paul Gortmaker:
"Fix up implicit <module.h> users that will break later.
The files changed here are simply modular source files that are
implicitly relying on <module.h> being present. We fix them up now,
so that we can decouple some of the module related init code from the
core init code in the future.
The addition of the module.h include to several files here is also a
no-op from a code generation point of view, else there would already
be compile issues with these files today.
There may be lots more implicit includes of <module.h> in tree, but
these are the ones that extensive build test coverage has shown that
must be fixed in order to avoid build breakage fallout for the pending
module.h <---> init.h code relocation we desire to complete"
* tag 'module-implicit-v4.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux:
frv: add module.h to mb93090-mb00/flash.c to avoid compile fail
drivers/cpufreq: include <module.h> for modular exynos-cpufreq.c code
drivers/staging: include <module.h> for modular android tegra_ion code
crypto/asymmetric_keys: pkcs7_key_type needs module.h
sh: mach-highlander/psw.c is tristate and should use module.h
drivers/regulator: include <module.h> for modular max77802 code
drivers/pcmcia: include <module.h> for modular xxs1500_ss code
drivers/hsi: include <module.h> for modular omap_ssi code
drivers/gpu: include <module.h> for modular rockchip code
drivers/gpio: include <module.h> for modular crystalcove code
drivers/clk: include <module.h> for clk-max77xxx modular code
Pull security subsystem updates from James Morris:
"The main change in this kernel is Casey's generalized LSM stacking
work, which removes the hard-coding of Capabilities and Yama stacking,
allowing multiple arbitrary "small" LSMs to be stacked with a default
monolithic module (e.g. SELinux, Smack, AppArmor).
See
https://lwn.net/Articles/636056/
This will allow smaller, simpler LSMs to be incorporated into the
mainline kernel and arbitrarily stacked by users. Also, this is a
useful cleanup of the LSM code in its own right"
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (38 commits)
tpm, tpm_crb: fix le64_to_cpu conversions in crb_acpi_add()
vTPM: set virtual device before passing to ibmvtpm_reset_crq
tpm_ibmvtpm: remove unneccessary message level.
ima: update builtin policies
ima: extend "mask" policy matching support
ima: add support for new "euid" policy condition
ima: fix ima_show_template_data_ascii()
Smack: freeing an error pointer in smk_write_revoke_subj()
selinux: fix setting of security labels on NFS
selinux: Remove unused permission definitions
selinux: enable genfscon labeling for sysfs and pstore files
selinux: enable per-file labeling for debugfs files.
selinux: update netlink socket classes
signals: don't abuse __flush_signals() in selinux_bprm_committed_creds()
selinux: Print 'sclass' as string when unrecognized netlink message occurs
Smack: allow multiple labels in onlycap
Smack: fix seq operations in smackfs
ima: pass iint to ima_add_violation()
ima: wrap event related data to the new ima_event_data structure
integrity: add validity checks for 'path' parameter
...
arm64:allmodconfig fails to build as follows.
In file included from include/acpi/platform/aclinux.h:74:0,
from include/acpi/platform/acenv.h:173,
from include/acpi/acpi.h:56,
from include/linux/acpi.h:37,
from ./arch/arm64/include/asm/dma-mapping.h:21,
from include/linux/dma-mapping.h:86,
from include/linux/skbuff.h:34,
from include/crypto/algapi.h:18,
from crypto/asymmetric_keys/rsa.c:16:
include/linux/ctype.h:15:12: error: expected ‘;’, ‘,’ or ‘)’
before numeric constant
#define _X 0x40 /* hex digit */
^
crypto/asymmetric_keys/rsa.c:123:47: note: in expansion of macro ‘_X’
static int RSA_I2OSP(MPI x, size_t xLen, u8 **_X)
^
crypto/asymmetric_keys/rsa.c: In function ‘RSA_verify_signature’:
crypto/asymmetric_keys/rsa.c:256:2: error:
implicit declaration of function ‘RSA_I2OSP’
The problem is caused by an unrelated include file change, resulting in
the inclusion of ctype.h on arm64. This in turn causes the local variable
_X to conflict with macro _X used in ctype.h.
Fixes: b6197b93fa ("arm64 : Introduce support for ACPI _CCA object")
Cc: Suthikulpanit, Suravee <Suravee.Suthikulpanit@amd.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This driver builds off of the tristate CONFIG_PKCS7_TEST_KEY and calls
module_init and module_exit. So it should explicitly include module.h
to avoid compile breakage during header shuffles done in the future.
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
The call to asymmetric_key_hex_to_key_id() from ca_keys_setup()
silently fails with -ENOMEM. Instead of dynamically allocating
memory from a __setup function, this patch defines a variable
and calls __asymmetric_key_hex_to_key_id(), a new helper function,
directly.
This bug was introduced by 'commit 46963b774d ("KEYS: Overhaul
key identification when searching for asymmetric keys")'.
Changelog:
- for clarification, rename hexlen to asciihexlen in
asymmetric_key_hex_to_key_id()
- add size argument to __asymmetric_key_hex_to_key_id() - David Howells
- inline __asymmetric_key_hex_to_key_id() - David Howells
- remove duplicate strlen() calls
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org # 3.18
Pull security subsystem updates from James Morris.
Mostly ima, selinux, smack and key handling updates.
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (65 commits)
integrity: do zero padding of the key id
KEYS: output last portion of fingerprint in /proc/keys
KEYS: strip 'id:' from ca_keyid
KEYS: use swapped SKID for performing partial matching
KEYS: Restore partial ID matching functionality for asymmetric keys
X.509: If available, use the raw subjKeyId to form the key description
KEYS: handle error code encoded in pointer
selinux: normalize audit log formatting
selinux: cleanup error reporting in selinux_nlmsg_perm()
KEYS: Check hex2bin()'s return when generating an asymmetric key ID
ima: detect violations for mmaped files
ima: fix race condition on ima_rdwr_violation_check and process_measurement
ima: added ima_policy_flag variable
ima: return an error code from ima_add_boot_aggregate()
ima: provide 'ima_appraise=log' kernel option
ima: move keyring initialization to ima_init()
PKCS#7: Handle PKCS#7 messages that contain no X.509 certs
PKCS#7: Better handling of unsupported crypto
KEYS: Overhaul key identification when searching for asymmetric keys
KEYS: Implement binary asymmetric key ID handling
...
Previous version of KEYS used to output last 4 bytes of fingerprint.
Now it outputs 8 last bytes of raw subject, which does not make any
visual meaning at all. This patch restores old behavior.
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: David Howells <dhowells@redhat.com>
The 'id:' prefix must be stripped for asymmetric_key_hex_to_key_id() to be
able to process ca_keyid.
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Earlier KEYS code used pure subject key identifiers (fingerprint)
for searching keys. Latest merged code removed that and broke
compatibility with integrity subsytem signatures and original
format of module signatures.
This patch returns back partial matching on SKID.
Reported-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Bring back the functionality whereby an asymmetric key can be matched with a
partial match on one of its IDs.
Whilst we're at it, allow for the possibility of having an increased number of
IDs.
Reported-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Module signing matches keys by comparing against the key description exactly.
However, the way the key description gets constructed got changed to be
composed of the subject name plus the certificate serial number instead of the
subject name and the subjectKeyId. I changed this to avoid problems with
certificates that don't *have* a subjectKeyId.
Instead, if available, use the raw subjectKeyId to form the key description
and only use the serial number if the subjectKeyId doesn't exist.
Reported-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: David Howells <dhowells@redhat.com>
As it stands, the code to generate an asymmetric key ID prechecks the hex
string it is given whilst determining the length, before it allocates the
buffer for hex2bin() to translate into - which mean that checking the result of
hex2bin() is redundant.
Unfortunately, hex2bin() is marked as __must_check, which means that the
following warning may be generated if the return value isn't checked:
crypto/asymmetric_keys/asymmetric_type.c: In function
asymmetric_key_hex_to_key_id:
crypto/asymmetric_keys/asymmetric_type.c:110: warning: ignoring return
value of hex2bin, declared with attribute warn_unused_result
The warning can't be avoided by casting the result to void.
Instead, use strlen() to check the length of the string and ignore the fact
that the string might not be entirely valid hex until after the allocation has
been done - in which case we can use the result of hex2bin() for this.
Signed-off-by: David Howells <dhowells@redhat.com>
The X.509 certificate list in a PKCS#7 message is optional. To save space, we
can omit the inclusion of any X.509 certificates if we are sure that we can
look the relevant public key up by the serial number and issuer given in a
signed info block.
This also supports use of a signed info block for which we can't find a
matching X.509 cert in the certificate list, though it be populated.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Provide better handling of unsupported crypto when verifying a PKCS#7 message.
If we can't bridge the gap between a pair of X.509 certs or between a signed
info block and an X.509 cert because it involves some crypto we don't support,
that's not necessarily the end of the world as there may be other ways points
at which we can intersect with a ring of trusted keys.
Instead, only produce ENOPKG immediately if all the signed info blocks in a
PKCS#7 message require unsupported crypto to bridge to the first X.509 cert.
Otherwise, we defer the generation of ENOPKG until we get ENOKEY during trust
validation.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Make use of the new match string preparsing to overhaul key identification
when searching for asymmetric keys. The following changes are made:
(1) Use the previously created asymmetric_key_id struct to hold the following
key IDs derived from the X.509 certificate or PKCS#7 message:
id: serial number + issuer
skid: subjKeyId + subject
authority: authKeyId + issuer
(2) Replace the hex fingerprint attached to key->type_data[1] with an
asymmetric_key_ids struct containing the id and the skid (if present).
(3) Make the asymmetric_type match data preparse select one of two searches:
(a) An iterative search for the key ID given if prefixed with "id:". The
prefix is expected to be followed by a hex string giving the ID to
search for. The criterion key ID is checked against all key IDs
recorded on the key.
(b) A direct search if the key ID is not prefixed with "id:". This will
look for an exact match on the key description.
(4) Make x509_request_asymmetric_key() take a key ID. This is then converted
into "id:<hex>" and passed into keyring_search() where match preparsing
will turn it back into a binary ID.
(5) X.509 certificate verification then takes the authority key ID and looks
up a key that matches it to find the public key for the certificate
signature.
(6) PKCS#7 certificate verification then takes the id key ID and looks up a
key that matches it to find the public key for the signed information
block signature.
Additional changes:
(1) Multiple subjKeyId and authKeyId values on an X.509 certificate cause the
cert to be rejected with -EBADMSG.
(2) The 'fingerprint' ID is gone. This was primarily intended to convey PGP
public key fingerprints. If PGP is supported in future, this should
generate a key ID that carries the fingerprint.
(3) Th ca_keyid= kernel command line option is now converted to a key ID and
used to match the authority key ID. Possibly this should only match the
actual authKeyId part and not the issuer as well.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Implement the first step in using binary key IDs for asymmetric keys rather
than hex string keys.
The previously added match data preparsing will be able to convert hex
criterion strings into binary which can then be compared more rapidly.
Further, we actually want more then one ID string per public key. The problem
is that X.509 certs refer to other X.509 certs by matching Issuer + AuthKeyId
to Subject + SubjKeyId, but PKCS#7 messages match against X.509 Issuer +
SerialNumber.
This patch just provides facilities for a later patch to make use of.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Make the key matching functions pointed to by key_match_data::cmp return bool
rather than int.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
A previous patch added a ->match_preparse() method to the key type. This is
allowed to override the function called by the iteration algorithm.
Therefore, we can just set a default that simply checks for an exact match of
the key description with the original criterion data and allow match_preparse
to override it as needed.
The key_type::match op is then redundant and can be removed, as can the
user_match() function.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Remove key_type::def_lookup_type as it's no longer used. The information now
defaults to KEYRING_SEARCH_LOOKUP_DIRECT but may be overridden by
type->match_preparse().
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Preparse the match data. This provides several advantages:
(1) The preparser can reject invalid criteria up front.
(2) The preparser can convert the criteria to binary data if necessary (the
asymmetric key type really wants to do binary comparison of the key IDs).
(3) The preparser can set the type of search to be performed. This means
that it's not then a one-off setting in the key type.
(4) The preparser can set an appropriate comparator function.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=v+dv
-----END PGP SIGNATURE-----
Merge tag 'keys-fixes-20140916' into keys-next
Merge in keyrings fixes, at least some of which later patches depend on:
(1) Reinstate the production of EPERM for key types beginning with '.' in
requests from userspace.
(2) Tidy up the cleanup of PKCS#7 message signed information blocks and fix a
bug this made more obvious.
Signed-off-by: David Howells <dhowells@redhat.coM>
Fix the parser cleanup code to drain parsed out X.509 certs in the case that
the decode fails and we jump to error_decode.
The function is rearranged so that the same cleanup code is used in the success
case as the error case - just that the message descriptor under construction is
only released if it is still pointed to by the context struct at that point.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
The code to free a signed info block is repeated several times, so move the
code to do it into a function of its own. This gives us a place to add clean
ups for stuff that gets added to pkcs7_signed_info.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Printing in base signature handling should have a prefix, so set pr_fmt().
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Relax the check on the length of the PKCS#7 cert as it appears that the PE
file wrapper size gets rounded up to the nearest 8.
The debugging output looks like this:
PEFILE: ==> verify_pefile_signature()
PEFILE: ==> pefile_parse_binary()
PEFILE: checksum @ 110
PEFILE: header size = 200
PEFILE: cert = 968 @547be0 [68 09 00 00 00 02 02 00 30 82 09 56 ]
PEFILE: sig wrapper = { 968, 200, 2 }
PEFILE: Signature data not PKCS#7
The wrapper is the first 8 bytes of the hex dump inside []. This indicates a
length of 0x968 bytes, including the wrapper header - so 0x960 bytes of
payload.
The ASN.1 wrapper begins [ ... 30 82 09 56 ]. That indicates an object of size
0x956 - a four byte discrepency, presumably just padding for alignment
purposes.
So we just check that the ASN.1 container is no bigger than the payload and
reduce the recorded size appropriately.
Whilst we're at it, allow shorter PKCS#7 objects that manage to squeeze within
127 or 255 bytes. It's just about conceivable if no X.509 certs are included
in the PKCS#7 message.
Reported-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Peter Jones <pjones@redhat.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
The length of the name of an asymmetric key subtype must be stored in struct
asymmetric_key_subtype::name_len so that it can be matched by a search for
"<subkey_name>:<partial_fingerprint>". Fix the public_key subtype to have
name_len set.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Need to export x509_request_asymmetric_key() so that PKCS#7 can use it if
compiled as a module.
Reported-by: James Morris <jmorris@namei.org>
Signed-off-by: David Howells <dhowells@redhat.com>
X.509 certificate issuer and subject fields are mandatory fields in the ASN.1
and so their existence needn't be tested for. They are guaranteed to end up
with an empty string if the name material has nothing we can use (see
x509_fabricate_name()).
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
pkcs7_request_asymmetric_key() and x509_request_asymmetric_key() do the same
thing, the latter being a copy of the former created by the IMA folks, so drop
the PKCS#7 version as the X.509 location is more general.
Whilst we're at it, rename the arguments of x509_request_asymmetric_key() to
better reflect what the values being passed in are intended to match on an
X.509 cert.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
x509_request_asymmetric_keys() doesn't need the lengths of the NUL-terminated
strings passing in as it can work that out for itself.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Fixes the following sparse warnings:
crypto/asymmetric_keys/pkcs7_key_type.c:73:17: warning:
symbol 'key_type_pkcs7' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: David Howells <dhowells@redhat.com>
crypto/asymmetric_keys/pkcs7_key_type.c needs to #include linux/err.h rather
than relying on getting it through other headers.
Without this, the powerpc allyesconfig build fails.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David Howells <dhowells@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIVAwUAU71KqhOxKuMESys7AQKIwRAAgOXB0hjYkWKCHL2B1/8bNUtRKQKHsCms
4HgNuLQ4v+RjpXDd4u0HvjkuD2ADDZlBPNSylsLsrnSXS7gH/b36vetAi8zYR/6B
Tuvorh6BfnOkN61Xg0mwlnXkp9jisTwaZofMTDlpQ4gPAAy098Lb73ONIIlJFIH9
WrUH/LLcPqtexdOOFtXPTBH0uz+qu8tcQHAotkP7Uwr4lDliVu1u4F2HkxRPvLjc
IKSgb1mRa0AU0mKXbdqFREBhpVIOPS7r5mIisKnUh2d8LysSiA++zlD8/t2pfsVM
enR7fo9pBEtJwhCrkff2p39DijR4M7s+SYF9soa9+9HQADt9D4bEtliqejGEkuQP
CBl4LZ4eHlh1bjQbay+PixDmFxEbN14IKkvNaXBvoax8f0DdXV2URGxmhU0tM08U
SFt2FaHhlBOsn4mhSoKJQnfHla5MP06ukrz4T+Qn2xd+lAX9e/sEBUQqT26o5Mgt
3yTaBrg4PREYjPVhguKT04tWrMdtvxY0nKRuUUeEcT7EQNVB5v/efGaWCxLI5k3O
wbkq5JvzSdq+VJOrby8m37fnEN7pxmF7mwOPXYfe3WPwJeX7xiYRc2ZGFntKdNzn
zSNKC4/OYiNwn+2ANL89kcJ3pJyoJ57SsMPiXpCCekPIcLtvGddoCvZae6f171HA
ZzlbxkjIxg0=
=e1NL
-----END PGP SIGNATURE-----
Merge tag 'keys-pefile-20140709' into keys-next
Here's a set of changes that implement a PE file signature checker.
This provides the following facility:
(1) Extract the signature from the PE file. This is a PKCS#7 message
containing, as its data, a hash of the signed parts of the file.
(2) Digest the signed parts of the file.
(3) Compare the digest with the one from the PKCS#7 message.
(4) Validate the signatures on the PKCS#7 message and indicate
whether it was matched by a trusted key.
Signed-off-by: David Howells <dhowells@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=aRKT
-----END PGP SIGNATURE-----
Merge tag 'keys-pkcs7-20140708' into keys-next
Here's a set of changes that implement a PKCS#7 message parser in the kernel.
The PKCS#7 message parsing will then be used to limit kexec to authenticated
kernels only if so configured.
The changes provide the following facilities:
(1) Parse an ASN.1 PKCS#7 message and pick out useful bits such as the data
content and the X.509 certificates used to sign it and all the data
signatures.
(2) Verify all the data signatures against the set of X.509 certificates
available in the message.
(3) Follow the certificate chains and verify that:
(a) for every self-signed X.509 certificate, check that it validly signed
itself, and:
(b) for every non-self-signed certificate, if we have a 'parent'
certificate, the former is validly signed by the latter.
(4) Look for intersections between the certificate chains and the trusted
keyring, if any intersections are found, verify that the trusted
certificates signed the intersection point in the chain.
(5) For testing purposes, a key type can be made available that will take a
PKCS#7 message, check that the message is trustworthy, and if so, add its
data content into the key.
Note that (5) has to be altered to take account of the preparsing patches
already committed to this branch.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells
Linus Torvalds
Pan Bian
Andrey Ryabinin
Mat Martineau
Lans Zhang
Arnd Bergmann
Colin Ian King
Nicolai Stange
Tadeusz Struk
Herbert Xu
Peter Jones
Petko Manolov
Paul Gortmaker
Sowmini Varadhan
sudip
Guenter Roeck
Mimi Zohar
Dmitry Kasatkin
Wei Yongjun