Граф коммитов

1803 Коммитов

Автор SHA1 Сообщение Дата
Guo Chao fef0ebdb22 ext4: remove duplicate call to ext4_bread() in ext4_init_new_dir()
This fixes a buffer cache leak when creating a directory, introduced
in commit a774f9c20.

Signed-off-by: Guo Chao <yan@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Tao Ma <boyu.mt@taobao.com>
2013-01-06 23:40:25 -05:00
Guo Chao 0ecaef0644 ext4: release buffer in failed path in dx_probe()
If checksum fails, we should also release the buffer
read from previous iteration.

Signed-off-by: Guo Chao <yan@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>-
Cc: stable@vger.kernel.org
--
 fs/ext4/namei.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
2013-01-06 23:38:47 -05:00
Valerie Aurora 96465efee1 ext4: fix configuration dependencies for ext4 ACLs and security labels
Commit "ext4: Remove CONFIG_EXT4_FS_XATTR" removed the configuration
dependencies for ext4 xattrs from the ext4 ACLs and security labels
configuration options, but did not replace them with a dependency on
ext4 itself.  Add back the dependency on ext4 so the options only show
up if ext4 is enabled.

Signed-off-by: Valerie Aurora <val@vaaconsulting.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Tao Ma <boyu.mt@taobao.com>
2013-01-06 23:38:44 -05:00
Linus Torvalds 5439ca6b8f Various bug fixes for ext4. Perhaps the most serious bug fixed is one
which could cause file system corruptions when performing file punch
 operations.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABCAAGBQJQ374OAAoJENNvdpvBGATwEGAP/jKUwjQhBZiF0k9dg1kQ5eTz
 bdli4fy1vxrEMIOym8IZa4nBQJVCkArwRgjc28gCBD6k9u6X3GPa26vUydsoPfP6
 odPdc9c9HtsbYQGuaq1SohID5HfjxHewTcUmCs4X4SpGcSurUcT7eQYWqSuIxFHR
 0nKk8NO4EcWh2uqIoGPrc8QpSdor0DXXYYjZmHCeVLH1n6PyoMsnrFMfO9KqMLUL
 vNR54CX9n1GRTfAfJNkNzcwfs8IfNkDUyv5hFpDh15tLltogU0TqnlAl3vSeZGSx
 vVfhwHmQTK/bJyC3YaoRZqq9CQJVk2f/OTBpJDFY/USaapuitJd6vqbmh7NiRNAN
 LaKmFt99MPfwyjEhIA7+J0LCTraAxc536q43oWWK5dAJhWI7DW0lbHARVeQTixNy
 KJ1Lp0pmmz1mX8/lugOnK1SPBF525kTaoiz2bWqg4oQgn7mBzUlgj+EV22/6Rq83
 TpKOKstl4BiZi8t5AhmFiwqtknCDiT5vUKQNy2kuM/oXtPJID/lM/TJbR5viYD3l
 AH3Ef7xj61CynFZ0oBeraGwtXc2BHJpJdWz+8uj0/VhFfC+uNUYapSLFwyiAVZKO
 xxaItT3ylfKpa0AWK6HBc2SLuL72SCHAPks06YKFtSyHtr5C8SCcafxU2DSOSi7K
 VrhkcH6STa77Br7a1ORt
 =9R/D
 -----END PGP SIGNATURE-----

Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

Pull ext4 bug fixes from Ted Ts'o:
 "Various bug fixes for ext4.  Perhaps the most serious bug fixed is one
  which could cause file system corruptions when performing file punch
  operations."

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: avoid hang when mounting non-journal filesystems with orphan list
  ext4: lock i_mutex when truncating orphan inodes
  ext4: do not try to write superblock on ro remount w/o journal
  ext4: include journal blocks in df overhead calcs
  ext4: remove unaligned AIO warning printk
  ext4: fix an incorrect comment about i_mutex
  ext4: fix deadlock in journal_unmap_buffer()
  ext4: split off ext4_journalled_invalidatepage()
  jbd2: fix assertion failure in jbd2_journal_flush()
  ext4: check dioread_nolock on remount
  ext4: fix extent tree corruption caused by hole punch
2013-01-02 09:57:34 -08:00
Theodore Ts'o 0e9a9a1ad6 ext4: avoid hang when mounting non-journal filesystems with orphan list
When trying to mount a file system which does not contain a journal,
but which does have a orphan list containing an inode which needs to
be truncated, the mount call with hang forever in
ext4_orphan_cleanup() because ext4_orphan_del() will return
immediately without removing the inode from the orphan list, leading
to an uninterruptible loop in kernel code which will busy out one of
the CPU's on the system.

This can be trivially reproduced by trying to mount the file system
found in tests/f_orphan_extents_inode/image.gz from the e2fsprogs
source tree.  If a malicious user were to put this on a USB stick, and
mount it on a Linux desktop which has automatic mounts enabled, this
could be considered a potential denial of service attack.  (Not a big
deal in practice, but professional paranoids worry about such things,
and have even been known to allocate CVE numbers for such problems.)

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Cc: stable@vger.kernel.org
2012-12-27 01:42:50 -05:00
Theodore Ts'o 721e3eba21 ext4: lock i_mutex when truncating orphan inodes
Commit c278531d39 added a warning when ext4_flush_unwritten_io() is
called without i_mutex being taken.  It had previously not been taken
during orphan cleanup since races weren't possible at that point in
the mount process, but as a result of this c278531d39, we will now see
a kernel WARN_ON in this case.  Take the i_mutex in
ext4_orphan_cleanup() to suppress this warning.

Reported-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Cc: stable@vger.kernel.org
2012-12-27 01:42:48 -05:00
Michael Tokarev d096ad0f79 ext4: do not try to write superblock on ro remount w/o journal
When a journal-less ext4 filesystem is mounted on a read-only block
device (blockdev --setro will do), each remount (for other, unrelated,
flags, like suid=>nosuid etc) results in a series of scary messages
from kernel telling about I/O errors on the device.

This is becauese of the following code ext4_remount():

       if (sbi->s_journal == NULL)
                ext4_commit_super(sb, 1);

at the end of remount procedure, which forces writing (flushing) of
a superblock regardless whenever it is dirty or not, if the filesystem
is readonly or not, and whenever the device itself is readonly or not.

We only need call ext4_commit_super when the file system had been
previously mounted read/write.

Thanks to Eric Sandeen for help in diagnosing this issue.

Signed-off-By: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
2012-12-25 14:08:16 -05:00
Eric Sandeen 0875a2b448 ext4: include journal blocks in df overhead calcs
To more accurately calculate overhead for "bsd" style
df reporting, we should count the journal blocks as
overhead as well.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Tested-by: Eric Whitney <enwlinux@gmail.com>
2012-12-25 13:56:01 -05:00
Eric Sandeen a28a9178e8 ext4: remove unaligned AIO warning printk
Although I put this in, I now think it was a bad decision.  For most
users, there is very little to be done in this case.  They get the
message, once per day, with no real context or proposed action.  TBH,
it generates support calls when it probably does not need to; the
message sounds more dire than the situation really is.

Just nuke it.  Normal investigation via blktrace or whatnot can
reveal poor IO patterns if bad performance is encountered.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-25 13:33:13 -05:00
Andy Lutomirski ad96f71155 ext4: fix an incorrect comment about i_mutex
i_mutex is not held when ->sync_file is called.

Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-25 13:31:52 -05:00
Jan Kara 53e872681f ext4: fix deadlock in journal_unmap_buffer()
We cannot wait for transaction commit in journal_unmap_buffer()
because we hold page lock which ranks below transaction start.  We
solve the issue by bailing out of journal_unmap_buffer() and
jbd2_journal_invalidatepage() with -EBUSY.  Caller is then responsible
for waiting for transaction commit to finish and try invalidation
again. Since the issue can happen only for page stradding i_size, it
is simple enough to manually call jbd2_journal_invalidatepage() for
such page from ext4_setattr(), check the return value and wait if
necessary.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-25 13:29:52 -05:00
Jan Kara 4520fb3c36 ext4: split off ext4_journalled_invalidatepage()
In data=journal mode we don't need delalloc or DIO handling in invalidatepage
and similarly in other modes we don't need the journal handling. So split
invalidatepage implementations.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-25 13:28:54 -05:00
Jan Kara 261cb20cb2 ext4: check dioread_nolock on remount
Currently we allow enabling dioread_nolock mount option on remount for
filesystems where blocksize < PAGE_CACHE_SIZE.  This isn't really
supported so fix the bug by moving the check for blocksize !=
PAGE_CACHE_SIZE into parse_options(). Change the original PAGE_SIZE to
PAGE_CACHE_SIZE along the way because that's what we are really
interested in.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Cc: stable@vger.kernel.org
2012-12-20 00:07:18 -05:00
Andrew Morton 965c8e59cf lseek: the "whence" argument is called "whence"
But the kernel decided to call it "origin" instead.  Fix most of the
sites.

Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17 17:15:12 -08:00
Forrest Liu c36575e663 ext4: fix extent tree corruption caused by hole punch
When depth of extent tree is greater than 1, logical start value of
interior node is not correctly updated in ext4_ext_rm_idx.

Signed-off-by: Forrest Liu <forrestl@synology.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Ashish Sangwan <ashishsangwan2@gmail.com>
Cc: stable@vger.kernel.org
2012-12-17 09:55:39 -05:00
Linus Torvalds 36cd5c19c3 There are two major features for this merge window. The first is
inline data, which allows small files or directories to be stored in
 the in-inode extended attribute area.  (This requires that the file
 system use inodes which are at least 256 bytes or larger; 128 byte
 inodes do not have any room for in-inode xattrs.)
 
 The second new feature is SEEK_HOLE/SEEK_DATA support.  This is
 enabled by the extent status tree patches, and this infrastructure
 will be used to further optimize ext4 in the future.
 
 Beyond that, we have the usual collection of code cleanups and bug
 fixes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABCAAGBQJQzTaLAAoJENNvdpvBGATwpqEQAM0WO9Kva3R8SoaD6NYOg4lN
 8oxRlht6yogSd6wwYZm1c4YF9UrhloS9kHyWcH3Wmr9fhM5vig1ec12eDsDGrjBc
 Wb+x+YrmczSJzK380JLxmYnVSXQVFl7/hNqaRowffTOJwgySmp8oLrI88ZcaCmVU
 +qWG2x6eVhCEQrpin9Mv3D6pHkx2hfg9w5sB0K+kpgsdjqLZsmPRmxU9nx0nEJYC
 gmbpo8Dcsfqra6DJosQGo7eFq7J3fm9v1ql+QOxOjc9/zD2XwdQE1JZImehvno5i
 Ekwr9771fsw34/QHJebYRC/OkftmOn4OPuQejd+AKNdBR4mO8G/AsLCroD17uLNi
 NrtMkE6ecJPb3SflarZruNYTUhJfj3H6V9P/8wggpyPzT3l19sqP+2F6GwZspZiV
 EJb2iTKn0Phc2OD1MqO9gFP0g+IMH0kktYdxEf0V2QOQqhQHnPwxF+2Tp6bVQcQs
 KCetN37y60qJ+zKH9xukcXmWQJvnjgmWqZqpomoA4lrwgKazTNDJJ+R+N+r5HKMj
 5cz2ntAhF8FfPhqVf+8DHgjKNUwm6C++O1+Lb9swZ0FkFi5Ob3OlwWaC75Gf4H+P
 2DslBapfM79bX14a9BKaBjly5FsAha7OzR+xo0MZN+fEcMLEk33kcRovcY8DHqxU
 aadriOatYYixvSZ5lL3m
 =aNOf
 -----END PGP SIGNATURE-----

Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

Pull ext4 update from Ted Ts'o:
 "There are two major features for this merge window.  The first is
  inline data, which allows small files or directories to be stored in
  the in-inode extended attribute area.  (This requires that the file
  system use inodes which are at least 256 bytes or larger; 128 byte
  inodes do not have any room for in-inode xattrs.)

  The second new feature is SEEK_HOLE/SEEK_DATA support.  This is
  enabled by the extent status tree patches, and this infrastructure
  will be used to further optimize ext4 in the future.

  Beyond that, we have the usual collection of code cleanups and bug
  fixes."

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (63 commits)
  ext4: zero out inline data using memset() instead of empty_zero_page
  ext4: ensure Inode flags consistency are checked at build time
  ext4: Remove CONFIG_EXT4_FS_XATTR
  ext4: remove unused variable from ext4_ext_in_cache()
  ext4: remove redundant initialization in ext4_fill_super()
  ext4: remove redundant code in ext4_alloc_inode()
  ext4: use sync_inode_metadata() when syncing inode metadata
  ext4: enable ext4 inline support
  ext4: let fallocate handle inline data correctly
  ext4: let ext4_truncate handle inline data correctly
  ext4: evict inline data out if we need to strore xattr in inode
  ext4: let fiemap work with inline data
  ext4: let ext4_rename handle inline dir
  ext4: let empty_dir handle inline dir
  ext4: let ext4_delete_entry() handle inline data
  ext4: make ext4_delete_entry generic
  ext4: let ext4_find_entry handle inline data
  ext4: create a new function search_dir
  ext4: let ext4_readdir handle inline data
  ext4: let add_dir_entry handle inline data properly
  ...
2012-12-16 17:33:01 -08:00
Linus Torvalds a2013a13e6 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial branch from Jiri Kosina:
 "Usual stuff -- comment/printk typo fixes, documentation updates, dead
  code elimination."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
  HOWTO: fix double words typo
  x86 mtrr: fix comment typo in mtrr_bp_init
  propagate name change to comments in kernel source
  doc: Update the name of profiling based on sysfs
  treewide: Fix typos in various drivers
  treewide: Fix typos in various Kconfig
  wireless: mwifiex: Fix typo in wireless/mwifiex driver
  messages: i2o: Fix typo in messages/i2o
  scripts/kernel-doc: check that non-void fcts describe their return value
  Kernel-doc: Convention: Use a "Return" section to describe return values
  radeon: Fix typo and copy/paste error in comments
  doc: Remove unnecessary declarations from Documentation/accounting/getdelays.c
  various: Fix spelling of "asynchronous" in comments.
  Fix misspellings of "whether" in comments.
  eisa: Fix spelling of "asynchronous".
  various: Fix spelling of "registered" in comments.
  doc: fix quite a few typos within Documentation
  target: iscsi: fix comment typos in target/iscsi drivers
  treewide: fix typo of "suport" in various comments and Kconfig
  treewide: fix typo of "suppport" in various comments
  ...
2012-12-13 12:00:02 -08:00
Theodore Ts'o bd9926e803 ext4: zero out inline data using memset() instead of empty_zero_page
Not all architectures (in particular, sparc64) have empty_zero_page.
So instead of copying from empty_zero_page, use memset to clear the
inline data by signalling to ext4_xattr_set_entry() via a magic
pointer value, EXT4_ZERO_ATTR_VALUE, which is defined by casting -1 to
a pointer.

This fixes a build failure on sparc64, and the memset() should be more
efficient than using memcpy() anyway.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-11 03:31:49 -05:00
Carlos Maiolino 9a4c801947 ext4: ensure Inode flags consistency are checked at build time
Flags being used by atomic operations in inode flags (e.g.
ext4_test_inode_flag(), should be consistent with that actually stored
in inodes, i.e.: EXT4_XXX_FL.

It ensures that this consistency is checked at build-time, not at
run-time.

Currently, the flags consistency are being checked at run-time, but,
there is no real reason to not do a build-time check instead of a
run-time check. The code is comparing macro defined values with enum
type variables, where both are constants, so, there is no problem in
comparing constants at build-time.

enum variables are treated as constants by the C compiler, according
to the C99 specs (see www.open-std.org/jtc1/sc22/wg14/www/docs/n1124.pdf 
sec. 6.2.5, item 16), so, there is no real problem in comparing an
enumeration type at build time

Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 16:30:45 -05:00
Tao Ma 939da10844 ext4: Remove CONFIG_EXT4_FS_XATTR
Ted has sent out a RFC about removing this feature. Eric and Jan
confirmed that both RedHat and SUSE enable this feature in all their
product.  David also said that "As far as I know, it's enabled in all
Android kernels that use ext4."  So it seems OK for us.

And what's more, as inline data depends its implementation on xattr,
and to be frank, I don't run any test again inline data enabled while
xattr disabled.  So I think we should add inline data and remove this
config option in the same release.

[ The savings if you disable CONFIG_EXT4_FS_XATTR is only 27k, which
  isn't much in the grand scheme of things.  Since no one seems to be
  testing this configuration except for some automated compile farms, on
  balance we are better removing this config option, and so that it is
  effectively always enabled. -- tytso ]

Cc: David Brown <davidb@codeaurora.org>
Cc: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 16:30:43 -05:00
Zhi Yong Wu 187fd030d8 ext4: remove unused variable from ext4_ext_in_cache()
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Zheng Liu <gnehzuil.liu@gmail.com>
2012-12-10 14:06:04 -05:00
Guo Chao 6b280c913e ext4: remove redundant initialization in ext4_fill_super()
We use kzalloc() to allocate sbi, no need to zero its field.

Signed-off-by: Guo Chao <yan@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:06:04 -05:00
Guo Chao a789f49c92 ext4: remove redundant code in ext4_alloc_inode()
inode_init_always() will initialize inode->i_data.writeback_index
anyway, no need to do this in ext4_alloc_inode().

Signed-off-by: Guo Chao <yan@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
2012-12-10 14:06:04 -05:00
Guo Chao 64744e03c6 ext4: use sync_inode_metadata() when syncing inode metadata
We have a dedicated interface to sync inode metadata.  Use it to
simplify ext4's code some.

Signed-off-by: Guo Chao <yan@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
2012-12-10 14:06:03 -05:00
Tao Ma f08225d176 ext4: enable ext4 inline support
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:06:03 -05:00
Tao Ma 0c8d414f16 ext4: let fallocate handle inline data correctly
If we are punching hole in a file, we will return ENOTSUPP.
As for the fallocation of some extents, we will convert the
inline data to a normal extent based file first.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:06:03 -05:00
Tao Ma aef1c8513c ext4: let ext4_truncate handle inline data correctly
Signed-off-by: Robin Dong <sanbai@taobao.com>
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:06:02 -05:00
Tao Ma 0d812f77b3 ext4: evict inline data out if we need to strore xattr in inode
Now we that store data in the inode, in case we need to store some
xattrs and inode doesn't have enough space, Andreas suggested that we
should keep the xattr(metadata) in and data should be pushed out.  So
this patch does the work.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:06:02 -05:00
Tao Ma 941919856c ext4: let fiemap work with inline data
fiemap is used to find the disk layout of a file, as for inline data,
let us just pretend like a file with just one extent.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:06:02 -05:00
Tao Ma 32f7f22c0b ext4: let ext4_rename handle inline dir
In case we rename a directory, ext4_rename has to read the dir block
and change its dotdot's information.  The old ext4_rename encapsulated
the dir_block read into itself.  So this patch adds a new function
ext4_get_first_dir_block() which gets the dir buffer information so
the ext4_rename can handle it properly.  As it will also change the
parent inode number, we return the parent_de so that ext4_rename() can
handle it more easily.

ext4_find_entry is also changed so that the caller(rename) can tell
whether the found entry is an inlined one or not and journaling the
corresponding buffer head.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:06:01 -05:00
Tao Ma 61f86638d8 ext4: let empty_dir handle inline dir
empty_dir is used when deleting a dir.  So it should handle inline dir
properly.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:06:01 -05:00
Tao Ma 9f40fe5463 ext4: let ext4_delete_entry() handle inline data
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:06:00 -05:00
Tao Ma 05019a9e7f ext4: make ext4_delete_entry generic
Currently ext4_delete_entry() is used only for dir entry removing from
a dir block.  So let us create a new function
ext4_generic_delete_entry and this function takes a entry_buf and a
buf_size so that it can be used for inline data.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:06:00 -05:00
Tao Ma e8e948e780 ext4: let ext4_find_entry handle inline data
Create a new function ext4_find_inline_entry() to handle the case of
inline data.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:06:00 -05:00
Tao Ma 7335cd3b41 ext4: create a new function search_dir
search_dirblock is used to search a dir block, but the code is almost
the same for searching an inline dir.

So create a new fuction search_dir and let search_dirblock call it.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:05:59 -05:00
Tao Ma 65d165d936 ext4: let ext4_readdir handle inline data
For "." and "..", we just call filldir by ourselves
instead of iterating the real dir entry.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:05:59 -05:00
Tao Ma 3c47d54170 ext4: let add_dir_entry handle inline data properly
This patch let add_dir_entry handle the inline data case. So the
dir is initialized as inline dir first and then we can try to add
some files to it, when the inline space can't hold all the entries,
a dir block will be created and the dir entry will be moved to it.

Also for an inlined dir, "." and ".." are removed and we only use
4 bytes to store the parent inode number. These 2 entries will be
added when we convert an inline dir to a block-based one.

[ Folded in patch from Dan Carpenter to remove an unused variable. ]

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:05:59 -05:00
Tao Ma 978fef914a ext4: create __ext4_insert_dentry for dir entry insertion
The old add_dirent_to_buf handles all the work related to the
work of adding dir entry to a dir block. Now we have inline data,
so create 2 new function __ext4_find_dest_de and __ext4_insert_dentry
that do the real work and let add_dirent_to_buf call them.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:05:58 -05:00
Tao Ma 226ba972b0 ext4: refactor __ext4_check_dir_entry() to accept start and size
The __ext4_check_dir_entry() function() is used to check whether the
de is over the block boundary.  Now with inline data, it could be
within the block boundary while exceeds the inode size.  So check this
function to check the overflow more precisely.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:05:58 -05:00
Tao Ma a774f9c20e ext4: make ext4_init_dot_dotdot for inline dir usage
Currently, the initialization of dot and dotdot are encapsulated in
ext4_mkdir and also bond with dir_block. So create a new function
named ext4_init_new_dir and the initialization is moved to
ext4_init_dot_dotdot. Now it will called either in the normal non-inline
case(rec_len of ".." will cover the whole block) or when we converting an
inline dir to a block(rec len of ".." will be the real length). The start
of the next entry is also returned for inline dir usage.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:05:57 -05:00
Tao Ma 9c3569b50f ext4: add delalloc support for inline data
For delayed allocation mode, we write to inline data if the file
is small enough. And in case of we write to some offset larger
than the inline size, the 1st page is dirtied, so that
ext4_da_writepages can handle the conversion. When the 1st page
is initialized with blocks, the inline part is removed.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:05:57 -05:00
Tao Ma 3fdcfb668f ext4: add journalled write support for inline data
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:05:57 -05:00
Tao Ma f19d5870cb ext4: add normal write support for inline data
For a normal write case (not journalled write, not delayed
allocation), we write to the inline if the file is small and convert
it to an extent based file when the write is larger than the max
inline size.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:05:51 -05:00
Tao Ma 46c7f25454 ext4: add read support for inline data
Let readpage and readpages handle the case when we want to read an
inlined file.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:04:52 -05:00
Tao Ma 67cf5b09a4 ext4: add the basic function for inline data support
Implement inline data with xattr.

Now we use "system.data" to store xattr, and the xattr will
be extended if the i_size is increased while we don't release
the space during truncate.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:04:46 -05:00
Tao Ma 879b38257b ext4: export inline xattr functions
The inline data feature will need some inline xattr functions, so
export them from fs/ext4/xattr.c so that inline.c can use them.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-05 10:28:46 -05:00
Tao Ma 152a7b0a80 ext4: move extra inode read to a new function
Currently, in ext4_iget we do a simple check to see whether
there does exist some information starting from the end
of i_extra_size. With inline data added, this procedure
is more complicated. So move it to a new function named
ext4_iget_extra_inode.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-02 11:13:24 -05:00
Theodore Ts'o aeb1e5d69a ext4: fix possible use after free with metadata csum
Commit fa77dcfafe introduces block bitmap checksum calculation into
ext4_new_inode() in the case that block group was uninitialized.
However we brelse() the bitmap buffer before we attempt to checksum it
so we have no guarantee that the buffer is still there.

Fix this by releasing the buffer after the possible checksum
computation.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Acked-by: Darrick J. Wong <darrick.wong@oracle.com>
Cc: stable@vger.kernel.org
2012-11-29 21:21:22 -05:00
Theodore Ts'o 69c499d152 ext4: restructure ext4_ext_direct_IO()
Remove a level of indentation by moving the DIO read and extending
write case to the beginning of the file.  This results in no actual
programmatic changes to the file, but makes it easier to
read/understand.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-11-29 21:13:48 -05:00
Theodore Ts'o 4a092d7379 ext4: rationalize ext4_extents.h inclusion
Previously, ext4_extents.h was being included at the end of ext4.h,
which was bad for a number of reasons: (a) it was not being included
in the expected place, and (b) it caused the header to be included
multiple times.  There were #ifdef's to prevent this from causing any
problems, but it still was unnecessary.

By moving the function declarations that were in ext4_extents.h to
ext4.h, which is standard practice for where the function declarations
for the rest of ext4.h can be found, we can remove ext4_extents.h from
being included in ext4.h at all, and then we can only include
ext4_extents.h where it is needed in ext4's source files.

It should be possible to move a few more things into ext4.h, and
further reduce the number of source files that need to #include
ext4_extents.h, but that's a cleanup for another day.

Reported-by: Sachin Kamat <sachin.kamat@linaro.org>
Reported-by: Wei Yongjun <weiyj.lk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-11-28 13:03:30 -05:00