Pull networking fixes from David Miller:
1) Fix RCU warnings in ipv6 multicast router code, from Madhuparna
Bhowmik.
2) Nexthop attributes aren't being checked properly because of
mis-initialized iterator, from David Ahern.
3) Revert iop_idents_reserve() change as it caused performance
regressions and was just working around what is really a UBSAN bug
in the compiler. From Yuqi Jin.
4) Read MAC address properly from ROM in bmac driver (double iteration
proceeds past end of address array), from Jeremy Kerr.
5) Add Microsoft Surface device IDs to r8152, from Marc Payne.
6) Prevent reference to freed SKB in __netif_receive_skb_core(), from
Boris Sukholitko.
7) Fix ACK discard behavior in rxrpc, from David Howells.
8) Preserve flow hash across packet scrubbing in wireguard, from Jason
A. Donenfeld.
9) Cap option length properly for SO_BINDTODEVICE in AX25, from Eric
Dumazet.
10) Fix encryption error checking in kTLS code, from Vadim Fedorenko.
11) Missing BPF prog ref release in flow dissector, from Jakub Sitnicki.
12) dst_cache must be used with BH disabled in tipc, from Eric Dumazet.
13) Fix use after free in mlxsw driver, from Jiri Pirko.
14) Order kTLS key destruction properly in mlx5 driver, from Tariq
Toukan.
15) Check devm_platform_ioremap_resource() return value properly in
several drivers, from Tiezhu Yang.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (71 commits)
net: smsc911x: Fix runtime PM imbalance on error
net/mlx4_core: fix a memory leak bug.
net: ethernet: ti: cpsw: fix ASSERT_RTNL() warning during suspend
net: phy: mscc: fix initialization of the MACsec protocol mode
net: stmmac: don't attach interface until resume finishes
net: Fix return value about devm_platform_ioremap_resource()
net/mlx5: Fix error flow in case of function_setup failure
net/mlx5e: CT: Correctly get flow rule
net/mlx5e: Update netdev txq on completions during closure
net/mlx5: Annotate mutex destroy for root ns
net/mlx5: Don't maintain a case of del_sw_func being null
net/mlx5: Fix cleaning unmanaged flow tables
net/mlx5: Fix memory leak in mlx5_events_init
net/mlx5e: Fix inner tirs handling
net/mlx5e: kTLS, Destroy key object after destroying the TIS
net/mlx5e: Fix allowed tc redirect merged eswitch offload cases
net/mlx5: Avoid processing commands before cmdif is ready
net/mlx5: Fix a race when moving command interface to events mode
net/mlx5: Add command entry handling completion
rxrpc: Fix a memory leak in rxkad_verify_response()
...
Starting from iputils s20190709 (used in Fedora 31), arping does not
support timeout being specified as a decimal:
$ arping -c 1 -I swp1 -b 192.0.2.66 -q -w 0.1
arping: invalid argument: '0.1'
Previously, such timeouts were rounded to an integer.
Fix this by specifying the timeout as an integer.
Fixes: a5ee171d08 ("selftests: mlxsw: qos_mc_aware: Add a test for UC awareness")
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The variable is used by log_test() to check if the test case completely
successfully or not. In case it is not initialized at the start of a
test case, it is possible for the test case to fail despite not
encountering any errors.
Example:
```
...
TEST: Trap group statistics [ OK ]
TEST: Trap policer [FAIL]
Policer drop counter was not incremented
TEST: Trap policer binding [FAIL]
Policer drop counter was not incremented
```
Failure of trap_policer_test() caused trap_policer_bind_test() to fail
as well.
Fix by adding missing initialization of the variable.
Fixes: 5fbff58e27 ("selftests: netdevsim: Add test cases for devlink-trap policers")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf 2020-05-22
The following pull-request contains BPF updates for your *net* tree.
We've added 3 non-merge commits during the last 3 day(s) which contain
a total of 5 files changed, 69 insertions(+), 11 deletions(-).
The main changes are:
1) Fix to reject mmap()'ing read-only array maps as writable since BPF verifier
relies on such map content to be frozen, from Andrii Nakryiko.
2) Fix breaking audit from secid_to_secctx() LSM hook by avoiding to use
call_int_hook() since this hook is not stackable, from KP Singh.
3) Fix BPF flow dissector program ref leak on netns cleanup, from Jakub Sitnicki.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
gcc-10 switched to defaulting to -fno-common, which broke iproute2-5.4.
This was fixed in iproute-5.6, so switch to that. Because we're after a
stable testing surface, we generally don't like to bump these
unnecessarily, but in this case, being able to actually build is a basic
necessity.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As discussed in [0], it's dangerous to allow mapping BPF map, that's meant to
be frozen and is read-only on BPF program side, because that allows user-space
to actually store a writable view to the page even after it is frozen. This is
exacerbated by BPF verifier making a strong assumption that contents of such
frozen map will remain unchanged. To prevent this, disallow mapping
BPF_F_RDONLY_PROG mmap()'able BPF maps as writable, ever.
[0] https://lore.kernel.org/bpf/CAEf4BzYGWYhXdp6BJ7_=9OQPJxQpgug080MMjdSB72i9R+5c6g@mail.gmail.com/
Fixes: fc9702273e ("bpf: Add mmap() support for BPF_MAP_TYPE_ARRAY")
Suggested-by: Jann Horn <jannh@google.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/bpf/20200519053824.1089415-1-andriin@fb.com
bugs, mostly for AMD processors. And a few other x86 fixes.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl6/0xcUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOZuwf/bQZw/SP9awLjOOVsRaSWUmwRGD4q
6KVq9+JYsPU4CyJ7P+vdsFF39a0ixoAnKWqRe/vsXdXZrdYCDUuQxh+7X+lmjKAb
dCQBnoqxI0w3yuxrm9Kn6Xs1AGIWibaRlZnXUKbuyn4ecFrh08OfYKGkYsEovhxK
G4ftY4/xyM7Qvm0fq7ZmzxPrkzd74HDZBvB83R6uiyPiX3w4O9qumqkUogcVXIJX
l3mnvSPClDDX4FOr8uhnU93varuR7Bek4Fh+Abj4uNks/F3z9ooJO9Hy9E+V5fhY
g6Oj2IrxDwJ2G6hqyucr1kujukJC1bX2nMZ1O4gNayXsxZEU/JtI0Y26SA==
=EzBt
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"A new testcase for guest debugging (gdbstub) that exposed a bunch of
bugs, mostly for AMD processors. And a few other x86 fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Fix off-by-one error in kvm_vcpu_ioctl_x86_setup_mce
KVM: x86: Fix pkru save/restore when guest CR4.PKE=0, move it to x86.c
KVM: SVM: Disable AVIC before setting V_IRQ
KVM: Introduce kvm_make_all_cpus_request_except()
KVM: VMX: pass correct DR6 for GD userspace exit
KVM: x86, SVM: isolate vcpu->arch.dr6 from vmcb->save.dr6
KVM: SVM: keep DR6 synchronized with vcpu->arch.dr6
KVM: nSVM: trap #DB and #BP to userspace if guest debugging is on
KVM: selftests: Add KVM_SET_GUEST_DEBUG test
KVM: X86: Fix single-step with KVM_SET_GUEST_DEBUG
KVM: X86: Set RTM for DB_VECTOR too for KVM_EXIT_DEBUG
KVM: x86: fix DR6 delivery for various cases of #DB injection
KVM: X86: Declare KVM_CAP_SET_GUEST_DEBUG properly
Pull networking fixes from David Miller:
1) Fix sk_psock reference count leak on receive, from Xiyu Yang.
2) CONFIG_HNS should be invisible, from Geert Uytterhoeven.
3) Don't allow locking route MTUs in ipv6, RFCs actually forbid this,
from Maciej Żenczykowski.
4) ipv4 route redirect backoff wasn't actually enforced, from Paolo
Abeni.
5) Fix netprio cgroup v2 leak, from Zefan Li.
6) Fix infinite loop on rmmod in conntrack, from Florian Westphal.
7) Fix tcp SO_RCVLOWAT hangs, from Eric Dumazet.
8) Various bpf probe handling fixes, from Daniel Borkmann.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (68 commits)
selftests: mptcp: pm: rm the right tmp file
dpaa2-eth: properly handle buffer size restrictions
bpf: Restrict bpf_trace_printk()'s %s usage and add %pks, %pus specifier
bpf: Add bpf_probe_read_{user, kernel}_str() to do_refine_retval_range
bpf: Restrict bpf_probe_read{, str}() only to archs where they work
MAINTAINERS: Mark networking drivers as Maintained.
ipmr: Add lockdep expression to ipmr_for_each_table macro
ipmr: Fix RCU list debugging warning
drivers: net: hamradio: Fix suspicious RCU usage warning in bpqether.c
net: phy: broadcom: fix BCM54XX_SHD_SCR3_TRDDAPD value for BCM54810
tcp: fix error recovery in tcp_zerocopy_receive()
MAINTAINERS: Add Jakub to networking drivers.
MAINTAINERS: another add of Karsten Graul for S390 networking
drivers: ipa: fix typos for ipa_smp2p structure doc
pppoe: only process PADT targeted at local interfaces
selftests/bpf: Enforce returning 0 for fentry/fexit programs
bpf: Enforce returning 0 for fentry/fexit progs
net: stmmac: fix num_por initialization
security: Fix the default value of secid_to_secctx hook
libbpf: Fix register naming in PT_REGS s390 macros
...
This Kselftest update for Linux 5.7-rc6 consists of
- lkdtm runner fixes to prevent dmesg clearing and shellcheck errors
- ftrace test handling when test module doesn't exist
- nsfs test fix to replace zero-length array with flexible-array
- dmabuf-heaps test fix to return clear error value
-----BEGIN PGP SIGNATURE-----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=2cqI
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
- lkdtm runner fixes to prevent dmesg clearing and shellcheck errors
- ftrace test handling when test module doesn't exist
- nsfs test fix to replace zero-length array with flexible-array
- dmabuf-heaps test fix to return clear error value
* tag 'linux-kselftest-5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/lkdtm: Use grep -E instead of egrep
selftests/lkdtm: Don't clear dmesg when running tests
selftests/ftrace: mark irqsoff_tracer.tc test as unresolved if the test module does not exist
tools/testing: Replace zero-length array with flexible-array
kselftests: dmabuf-heaps: Fix confused return value on expected error testing
Alexei Starovoitov says:
====================
pull-request: bpf 2020-05-15
The following pull-request contains BPF updates for your *net* tree.
We've added 9 non-merge commits during the last 2 day(s) which contain
a total of 14 files changed, 137 insertions(+), 43 deletions(-).
The main changes are:
1) Fix secid_to_secctx LSM hook default value, from Anders.
2) Fix bug in mmap of bpf array, from Andrii.
3) Restrict bpf_probe_read to archs where they work, from Daniel.
4) Enforce returning 0 for fentry/fexit progs, from Yonghong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
"$err" is a variable pointing to a temp file. "$out" is not: only used
as a local variable in "check()" and representing the output of a
command line.
Fixes: eedbc68532 (selftests: add PM netlink functional tests)
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are a few fentry/fexit programs returning non-0.
The tests with these programs will break with the previous
patch which enfoced return-0 rules. Fix them properly.
Fixes: ac065870d9 ("selftests/bpf: Add BPF_PROG, BPF_KPROBE, and BPF_KRETPROBE macros")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200514053207.1298479-1-yhs@fb.com
mmap() subsystem allows user-space application to memory-map region with
initial page offset. This wasn't taken into account in initial implementation
of BPF array memory-mapping. This would result in wrong pages, not taking into
account requested page shift, being memory-mmaped into user-space. This patch
fixes this gap and adds a test for such scenario.
Fixes: fc9702273e ("bpf: Add mmap() support for BPF_MAP_TYPE_ARRAY")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200512235925.3817805-1-andriin@fb.com
Unfortunately, the last set of fixes introduced some minor bugs:
- The bootconfig apply_xbc() leak fix caused the application to return
a positive number on success, when it should have returned zero.
- The preempt_irq_delay_thread fix to make the creation code
wait for the kthread to finish to prevent it from executing after
module unload, can now cause the kthread to exit before it even
executes (preventing it to run its tests).
- The fix to the bootconfig that fixed the initrd to remove the
bootconfig from causing the kernel to panic, now prints a warning
that the bootconfig is not found, even when bootconfig is not
on the command line.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXrq2ehQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qrdjAQDGNaJa7Ft13KTDTNTioKmOorOi38vF
ava4E3uBHl3StQD/anJmVq7Kk4WJFKGYemV6usbjDqy510PCFu/VQ1AbGQc=
=hJvk
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Fixes to previous fixes.
Unfortunately, the last set of fixes introduced some minor bugs:
- The bootconfig apply_xbc() leak fix caused the application to
return a positive number on success, when it should have returned
zero.
- The preempt_irq_delay_thread fix to make the creation code wait for
the kthread to finish to prevent it from executing after module
unload, can now cause the kthread to exit before it even executes
(preventing it to run its tests).
- The fix to the bootconfig that fixed the initrd to remove the
bootconfig from causing the kernel to panic, now prints a warning
that the bootconfig is not found, even when bootconfig is not on
the command line"
* tag 'trace-v5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
bootconfig: Fix to prevent warning message if no bootconfig option
tracing: Wait for preempt irq delay thread to execute
tools/bootconfig: Fix apply_xbc() to return zero on success
The return of apply_xbc() returns the result of the last write() call, which
is not what is expected. It should only return zero on success.
Link: https://lore.kernel.org/r/20200508093059.GF9365@kadam
Fixes: 8842604446 ("tools/bootconfig: Fix resource leak in apply_xbc()")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
- Ensure that direct mapping alias is always flushed when changing page
attributes. The optimization for small ranges failed to do so when
the virtual address was in the vmalloc or module space.
- Unbreak the trace event registration for syscalls without arguments
caused by the refactoring of the SYSCALL_DEFINE0() macro.
- Move the printk in the TSC deadline timer code to a place where it is
guaranteed to only be called once during boot and cannot be rearmed by
clearing warn_once after boot. If it's invoked post boot then lockdep
rightfully complains about a potential deadlock as the calling context
is different.
- A series of fixes for objtool and the ORC unwinder addressing variety
of small issues:
Stack offset tracking for indirect CFAs in objtool ignored subsequent
pushs and pops
Repair the unwind hints in the register clearing entry ASM code
Make the unwinding in the low level exit to usermode code stop after
switching to the trampoline stack. The unwind hint is not longer valid
and the ORC unwinder emits a warning as it can't find the registers
anymore.
Fix the unwind hints in switch_to_asm() and rewind_stack_do_exit()
which caused objtool to generate bogus ORC data.
Prevent unwinder warnings when dumping the stack of a non-current
task as there is no way to be sure about the validity because the
dumped stack can be a moving target.
Make the ORC unwinder behave the same way as the frame pointer
unwinder when dumping an inactive tasks stack and do not skip the
first frame.
Prevent ORC unwinding before ORC data has been initialized
Immediately terminate unwinding when a unknown ORC entry type is
found.
Prevent premature stop of the unwinder caused by IRET frames.
Fix another infinite loop in objtool caused by a negative offset which
was not catched.
Address a few build warnings in the ORC unwinder and add missing
static/ro_after_init annotations
-----BEGIN PGP SIGNATURE-----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=0rCi
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2020-05-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of fixes for x86:
- Ensure that direct mapping alias is always flushed when changing
page attributes. The optimization for small ranges failed to do so
when the virtual address was in the vmalloc or module space.
- Unbreak the trace event registration for syscalls without arguments
caused by the refactoring of the SYSCALL_DEFINE0() macro.
- Move the printk in the TSC deadline timer code to a place where it
is guaranteed to only be called once during boot and cannot be
rearmed by clearing warn_once after boot. If it's invoked post boot
then lockdep rightfully complains about a potential deadlock as the
calling context is different.
- A series of fixes for objtool and the ORC unwinder addressing
variety of small issues:
- Stack offset tracking for indirect CFAs in objtool ignored
subsequent pushs and pops
- Repair the unwind hints in the register clearing entry ASM code
- Make the unwinding in the low level exit to usermode code stop
after switching to the trampoline stack. The unwind hint is no
longer valid and the ORC unwinder emits a warning as it can't
find the registers anymore.
- Fix unwind hints in switch_to_asm() and rewind_stack_do_exit()
which caused objtool to generate bogus ORC data.
- Prevent unwinder warnings when dumping the stack of a
non-current task as there is no way to be sure about the
validity because the dumped stack can be a moving target.
- Make the ORC unwinder behave the same way as the frame pointer
unwinder when dumping an inactive tasks stack and do not skip
the first frame.
- Prevent ORC unwinding before ORC data has been initialized
- Immediately terminate unwinding when a unknown ORC entry type
is found.
- Prevent premature stop of the unwinder caused by IRET frames.
- Fix another infinite loop in objtool caused by a negative
offset which was not catched.
- Address a few build warnings in the ORC unwinder and add
missing static/ro_after_init annotations"
* tag 'x86-urgent-2020-05-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/unwind/orc: Move ORC sorting variables under !CONFIG_MODULES
x86/apic: Move TSC deadline timer debug printk
ftrace/x86: Fix trace event registration for syscalls without arguments
x86/mm/cpa: Flush direct map alias during cpa
objtool: Fix infinite loop in for_offset_range()
x86/unwind/orc: Fix premature unwind stoppage due to IRET frames
x86/unwind/orc: Fix error path for bad ORC entry type
x86/unwind/orc: Prevent unwinding before ORC initialization
x86/unwind/orc: Don't skip the first frame for inactive tasks
x86/unwind: Prevent false warnings for non-current tasks
x86/unwind/orc: Convert global variables to static
x86/entry/64: Fix unwind hints in rewind_stack_do_exit()
x86/entry/64: Fix unwind hints in __switch_to_asm()
x86/entry/64: Fix unwind hints in kernel exit path
x86/entry/64: Fix unwind hints in register clearing code
objtool: Fix stack offset tracking for indirect CFAs
search which can be triggered when building the kernel with
-ffunction-sections.
-----BEGIN PGP SIGNATURE-----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=0+2v
-----END PGP SIGNATURE-----
Merge tag 'objtool-urgent-2020-05-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fix from Thomas Gleixner:
"A single fix for objtool to prevent an infinite loop in the
jump table search which can be triggered when building the
kernel with '-ffunction-sections'"
* tag 'objtool-urgent-2020-05-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix infinite loop in find_jump_table()
-----BEGIN PGP SIGNATURE-----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=73nU
-----END PGP SIGNATURE-----
Merge tag 'block-5.7-2020-05-09' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- a small series fixing a use-after-free of bdi name (Christoph,Yufen)
- NVMe fix for a regression with the smaller CQ update (Alexey)
- NVMe fix for a hang at namespace scanning error recovery (Sagi)
- fix race with blk-iocost iocg->abs_vdebt updates (Tejun)
* tag 'block-5.7-2020-05-09' of git://git.kernel.dk/linux-block:
nvme: fix possible hang when ns scanning fails during error recovery
nvme-pci: fix "slimmer CQ head update"
bdi: add a ->dev_name field to struct backing_dev_info
bdi: use bdi_dev_name() to get device name
bdi: move bdi_dev_name out of line
vboxsf: don't use the source name in the bdi name
iocost: protect iocg->abs_vdebt with iocg->waitq.lock
shellcheck complains that egrep is deprecated, and the grep man page
agrees. Use grep -E instead.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
It is Very Rude to clear dmesg in test scripts. That's because the
script may be part of a larger test run, and clearing dmesg
potentially destroys the output of other tests.
We can avoid using dmesg -c by saving the content of dmesg before the
test, and then using diff to compare that to the dmesg afterward,
producing a log with just the added lines.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The UNRESOLVED state is much more apporiate than the UNSUPPORTED state
for the absence of the test module, as it matches "test was set up
incorrectly" situation in the README file.
A possible scenario is that the function was enabled (supported by the
kernel) but the module was not installed properly, in this case we
cannot call this as UNSUPPORTED.
This change also make it consistent with other module-related tests
in ftrace.
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Merge misc fixes from Andrew Morton:
"14 fixes and one selftest to verify the ipc fixes herein"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm: limit boost_watermark on small zones
ubsan: disable UBSAN_ALIGNMENT under COMPILE_TEST
mm/vmscan: remove unnecessary argument description of isolate_lru_pages()
epoll: atomically remove wait entry on wake up
kselftests: introduce new epoll60 testcase for catching lost wakeups
percpu: make pcpu_alloc() aware of current gfp context
mm/slub: fix incorrect interpretation of s->offset
scripts/gdb: repair rb_first() and rb_last()
eventpoll: fix missing wakeup for ovflist in ep_poll_callback
arch/x86/kvm/svm/sev.c: change flag passed to GUP fast in sev_pin_memory()
scripts/decodecode: fix trapping instruction formatting
kernel/kcov.c: fix typos in kcov_remote_start documentation
mm/page_alloc: fix watchdog soft lockups during set_zone_contiguous()
mm, memcg: fix error return value of mem_cgroup_css_alloc()
ipc/mqueue.c: change __do_notify() to bypass check_kill_permission()
When I added the expected error testing, I forgot I need to set
the return to zero when we successfully see an error.
Without this change we only end up testing a single heap
before the test quits.
Cc: Shuah Khan <shuah@kernel.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: "Andrew F. Davis" <afd@ti.com>
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When KVM_EXIT_DEBUG is raised for the disabled-breakpoints case (DR7.GD),
DR6 was incorrectly copied from the value in the VM. Instead,
DR6.BD should be set in order to catch this case.
On AMD this does not need any special code because the processor triggers
a #DB exception that is intercepted. However, the testcase would fail
without the previous patch because both DR6.BS and DR6.BD would be set.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The documentation for UBSAN_ALIGNMENT already mentions that it should
not be used on all*config builds (and for efficient-unaligned-access
architectures), so just refactor the Kconfig to correctly implement this
so randconfigs will stop creating insane images that freak out objtool
under CONFIG_UBSAN_TRAP (due to the false positives producing functions
that never return, etc).
Link: http://lkml.kernel.org/r/202005011433.C42EA3E2D@keescook
Fixes: 0887a7ebc9 ("ubsan: add trap instrumentation option")
Signed-off-by: Kees Cook <keescook@chromium.org>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/linux-next/202004231224.D6B3B650@keescook/
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This test case catches lost wake up introduced by commit 339ddb53d3
("fs/epoll: remove unnecessary wakeups of nested epoll")
The test is simple: we have 10 threads and 10 event fds. Each thread
can harvest only 1 event. 1 producer fires all 10 events at once and
waits that all 10 events will be observed by 10 threads.
In case of lost wakeup epoll_wait() will timeout and 0 will be returned.
Test case catches two sort of problems: forgotten wakeup on event, which
hits the ->ovflist list, this problem was fixed by:
5a2513239750 ("eventpoll: fix missing wakeup for ovflist in ep_poll_callback")
the other problem is when several sequential events hit the same waiting
thread, thus other waiters get no wakeups. Problem is fixed in the
following patch.
Signed-off-by: Roman Penyaev <rpenyaev@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Khazhismel Kumykov <khazhy@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Heiher <r@hev.cc>
Cc: Jason Baron <jbaron@akamai.com>
Link: http://lkml.kernel.org/r/20200430130326.1368509-1-rpenyaev@suse.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Fix bootconfig causing kernels to fail with CONFIG_BLK_DEV_RAM enabled
- Fix allocation leaks in bootconfig tool
- Fix a double initialization of a variable
- Fix API bootconfig usage from kprobe boot time events
- Reject NULL location for kprobes
- Fix crash caused by preempt delay module not cleaning up kthread
correctly
- Add vmalloc_sync_mappings() to prevent x86_64 page faults from
recursively faulting from tracing page faults
- Fix comment in gpu/trace kerneldoc header
- Fix documentation of how to create a trace event class
- Make the local tracing_snapshot_instance_cond() function static
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXrRUBhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qveTAP4iNCnMeS/Isb+MXQx2Pnu7OP+0BeRP
2ahlKG2sBgEdnwEAoUzxQoYWtfC6xoM38YwLuZPRlcScRea/5CRHyW8BFQc=
=o3pV
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix bootconfig causing kernels to fail with CONFIG_BLK_DEV_RAM
enabled
- Fix allocation leaks in bootconfig tool
- Fix a double initialization of a variable
- Fix API bootconfig usage from kprobe boot time events
- Reject NULL location for kprobes
- Fix crash caused by preempt delay module not cleaning up kthread
correctly
- Add vmalloc_sync_mappings() to prevent x86_64 page faults from
recursively faulting from tracing page faults
- Fix comment in gpu/trace kerneldoc header
- Fix documentation of how to create a trace event class
- Make the local tracing_snapshot_instance_cond() function static
* tag 'trace-v5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tools/bootconfig: Fix resource leak in apply_xbc()
tracing: Make tracing_snapshot_instance_cond() static
tracing: Fix doc mistakes in trace sample
gpu/trace: Minor comment updates for gpu_mem_total tracepoint
tracing: Add a vmalloc_sync_mappings() for safe measure
tracing: Wait for preempt irq delay thread to finish
tracing/kprobes: Reject new event if loc is NULL
tracing/boottime: Fix kprobe event API usage
tracing/kprobes: Fix a double initialization typo
bootconfig: Fix to remove bootconfig data from initrd while boot
This Kselftest update for Linux 5.7-rc5 consists of ftrace test fixes
and fix to kvm Makefile for relocatable native/cross builds and installs.
-----BEGIN PGP SIGNATURE-----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=jUcW
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-5.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"ftrace test fixes and a fix to kvm Makefile for relocatable
native/cross builds and installs"
* tag 'linux-kselftest-5.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: fix kvm relocatable native/cross builds and installs
selftests/ftrace: Make XFAIL green color
ftrace/selftest: make unresolved cases cause failure if --fail-unresolved set
ftrace/selftests: workaround cgroup RT scheduling issues
Fix the @data and @fd allocations that are leaked in the error path of
apply_xbc().
Link: http://lkml.kernel.org/r/583a49c9-c27a-931d-e6c2-6f63a4b18bea@huawei.com
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl6yqbIUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroObBQf+NH9DCs6X92YggAoNpJl6uSIOX35X
ErdWqYj80Xx95QU73aMukjs3Zqxe6WfYI9jPEOD8SDUZzZlVfIA35D8BYlqt1c5R
A2K2ebTQbZ+j487QTUPbEvEivyxyVSozwvOdKBfL5kv0D9Cn2STyjVjmguUoCp9n
VztmwbwpSZdOnexRSolwAWuyOriYbvpV12cIZpcMGrjL67yZPv8UyCxxJplDCLlB
1c8tvGI2Md8apE/YZDqlCFh3H4YBQsact8uOoyY8cXKO/xIAsZOI+Dhm/cQAhGDk
QIQqv/hkM4HPvOXQluwIau4Cx+Fl05xY/ggtQt4z/8yml2pOw8PKmwziZA==
=60QX
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Bugfixes, mostly for ARM and AMD, and more documentation.
Slightly bigger than usual because I couldn't send out what was
pending for rc4, but there is nothing worrisome going on. I have more
fixes pending for guest debugging support (gdbstub) but I will send
them next week"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (22 commits)
KVM: X86: Declare KVM_CAP_SET_GUEST_DEBUG properly
KVM: selftests: Fix build for evmcs.h
kvm: x86: Use KVM CPU capabilities to determine CR4 reserved bits
KVM: VMX: Explicitly clear RFLAGS.CF and RFLAGS.ZF in VM-Exit RSB path
docs/virt/kvm: Document configuring and running nested guests
KVM: s390: Remove false WARN_ON_ONCE for the PQAP instruction
kvm: ioapic: Restrict lazy EOI update to edge-triggered interrupts
KVM: x86: Fixes posted interrupt check for IRQs delivery modes
KVM: SVM: fill in kvm_run->debug.arch.dr[67]
KVM: nVMX: Replace a BUG_ON(1) with BUG() to squash clang warning
KVM: arm64: Fix 32bit PC wrap-around
KVM: arm64: vgic-v4: Initialize GICv4.1 even in the absence of a virtual ITS
KVM: arm64: Save/restore sp_el0 as part of __guest_enter
KVM: arm64: Delete duplicated label in invalid_vector
KVM: arm64: vgic-its: Fix memory leak on the error path of vgic_add_lpi()
KVM: arm64: vgic-v3: Retire all pending LPIs on vcpu destroy
KVM: arm: vgic-v2: Only use the virtual state when userspace accesses pending bits
KVM: arm: vgic: Only use the virtual state when userspace accesses enable bits
KVM: arm: vgic: Synchronize the whole guest on GIC{D,R}_I{S,C}ACTIVER read
KVM: arm64: PSCI: Forbid 64bit functions for 32bit guests
...
Kristen found a hang in objtool when building with -ffunction-sections.
It was caused by evergreen_pcie_gen2_enable.cold() being laid out
immediately before evergreen_pcie_gen2_enable(). Since their "pfunc" is
always the same, find_jump_table() got into an infinite loop because it
didn't recognize the boundary between the two functions.
Fix that with a new prev_insn_same_sym() helper, which doesn't cross
subfunction boundaries.
Reported-by: Kristen Carlson Accardi <kristen@linux.intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/378b51c9d9c894dc3294bc460b4b0869e950b7c5.1588110291.git.jpoimboe@redhat.com
Covers fundamental tests for KVM_SET_GUEST_DEBUG. It is very close to the debug
test in kvm-unit-test, but doing it from outside the guest.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20200505205000.188252-4-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pull networking fixes from David Miller:
1) Fix reference count leaks in various parts of batman-adv, from Xiyu
Yang.
2) Update NAT checksum even when it is zero, from Guillaume Nault.
3) sk_psock reference count leak in tls code, also from Xiyu Yang.
4) Sanity check TCA_FQ_CODEL_DROP_BATCH_SIZE netlink attribute in
fq_codel, from Eric Dumazet.
5) Fix panic in choke_reset(), also from Eric Dumazet.
6) Fix VLAN accel handling in bnxt_fix_features(), from Michael Chan.
7) Disallow out of range quantum values in sch_sfq, from Eric Dumazet.
8) Fix crash in x25_disconnect(), from Yue Haibing.
9) Don't pass pointer to local variable back to the caller in
nf_osf_hdr_ctx_init(), from Arnd Bergmann.
10) Wireguard should use the ECN decap helper functions, from Toke
Høiland-Jørgensen.
11) Fix command entry leak in mlx5 driver, from Moshe Shemesh.
12) Fix uninitialized variable access in mptcp's
subflow_syn_recv_sock(), from Paolo Abeni.
13) Fix unnecessary out-of-order ingress frame ordering in macsec, from
Scott Dial.
14) IPv6 needs to use a global serial number for dst validation just
like ipv4, from David Ahern.
15) Fix up PTP_1588_CLOCK deps, from Clay McClure.
16) Missing NLM_F_MULTI flag in gtp driver netlink messages, from
Yoshiyuki Kurauchi.
17) Fix a regression in that dsa user port errors should not be fatal,
from Florian Fainelli.
18) Fix iomap leak in enetc driver, from Dejin Zheng.
19) Fix use after free in lec_arp_clear_vccs(), from Cong Wang.
20) Initialize protocol value earlier in neigh code paths when
generating events, from Roman Mashak.
21) netdev_update_features() must be called with RTNL mutex in macsec
driver, from Antoine Tenart.
22) Validate untrusted GSO packets even more strictly, from Willem de
Bruijn.
23) Wireguard decrypt worker needs a cond_resched(), from Jason
Donenfeld.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (111 commits)
net: flow_offload: skip hw stats check for FLOW_ACTION_HW_STATS_DONT_CARE
MAINTAINERS: put DYNAMIC INTERRUPT MODERATION in proper order
wireguard: send/receive: use explicit unlikely branch instead of implicit coalescing
wireguard: selftests: initalize ipv6 members to NULL to squelch clang warning
wireguard: send/receive: cond_resched() when processing worker ringbuffers
wireguard: socket: remove errant restriction on looping to self
wireguard: selftests: use normal kernel stack size on ppc64
net: ethernet: ti: am65-cpsw-nuss: fix irqs type
ionic: Use debugfs_create_bool() to export bool
net: dsa: Do not leave DSA master with NULL netdev_ops
net: dsa: remove duplicate assignment in dsa_slave_add_cls_matchall_mirred
net: stricter validation of untrusted gso packets
seg6: fix SRH processing to comply with RFC8754
net: mscc: ocelot: ANA_AUTOAGE_AGE_PERIOD holds a value in seconds, not ms
net: dsa: ocelot: the MAC table on Felix is twice as large
net: dsa: sja1105: the PTP_CLK extts input reacts on both edges
selftests: net: tcp_mmap: fix SO_RCVLOWAT setting
net: hsr: fix incorrect type usage for protocol variable
net: macsec: fix rtnl locking issue
net: mvpp2: cls: Prevent buffer overflow in mvpp2_ethtool_cls_rule_del()
...
It's already possible to create two different interfaces and loop
packets between them. This has always been possible with tunnels in the
kernel, and isn't specific to wireguard. Therefore, the networking stack
already needs to deal with that. At the very least, the packet winds up
exceeding the MTU and is discarded at that point. So, since this is
already something that happens, there's no need to forbid the not very
exceptional case of routing a packet back to the same interface; this
loop is no different than others, and we shouldn't special case it, but
rather rely on generic handling of loops in general. This also makes it
easier to do interesting things with wireguard such as onion routing.
At the same time, we add a selftest for this, ensuring that both onion
routing works and infinite routing loops do not crash the kernel. We
also add a test case for wireguard interfaces nesting packets and
sending traffic between each other, as well as the loop in this case
too. We make sure to send some throughput-heavy traffic for this use
case, to stress out any possible recursion issues with the locks around
workqueues.
Fixes: e7096c131e ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While at some point it might have made sense to be running these tests
on ppc64 with 4k stacks, the kernel hasn't actually used 4k stacks on
64-bit powerpc in a long time, and more interesting things that we test
don't really work when we deviate from the default (16k). So, we stop
pushing our luck in this commit, and return to the default instead of
the minimum.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since chunk_size is no longer an integer, we can not
use it directly as an argument of setsockopt().
This patch should fix tcp_mmap for Big Endian kernels.
Fixes: 597b01edaf ("selftests: net: avoid ptl lock contention in tcp_mmap")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Arjun Roy <arjunroy@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We added fields in tcp_zerocopy_receive structure,
so make sure to clear all fields to not pass garbage to the kernel.
We were lucky because recent additions added 'out' parameters,
still we need to clean our reference implementation, before folks
copy/paste it.
Fixes: c8856c0514 ("tcp-zerocopy: Return inq along with tcp receive zerocopy.")
Fixes: 33946518d4 ("tcp-zerocopy: Return sk_err (if set) along with tcp receive zerocopy.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Arjun Roy <arjunroy@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
I got this error when building kvm selftests:
/usr/bin/ld: /home/xz/git/linux/tools/testing/selftests/kvm/libkvm.a(vmx.o):/home/xz/git/linux/tools/testing/selftests/kvm/include/evmcs.h:222: multiple definition of `current_evmcs'; /tmp/cco1G48P.o:/home/xz/git/linux/tools/testing/selftests/kvm/include/evmcs.h:222: first defined here
/usr/bin/ld: /home/xz/git/linux/tools/testing/selftests/kvm/libkvm.a(vmx.o):/home/xz/git/linux/tools/testing/selftests/kvm/include/evmcs.h:223: multiple definition of `current_vp_assist'; /tmp/cco1G48P.o:/home/xz/git/linux/tools/testing/selftests/kvm/include/evmcs.h:223: first defined here
I think it's because evmcs.h is included both in a test file and a lib file so
the structs have multiple declarations when linking. After all it's not a good
habit to declare structs in the header files.
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20200504220607.99627-1-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
abs_vdebt is an atomic_64 which tracks how much over budget a given cgroup
is and controls the activation of use_delay mechanism. Once a cgroup goes
over budget from forced IOs, it has to pay it back with its future budget.
The progress guarantee on debt paying comes from the iocg being active -
active iocgs are processed by the periodic timer, which ensures that as time
passes the debts dissipate and the iocg returns to normal operation.
However, both iocg activation and vdebt handling are asynchronous and a
sequence like the following may happen.
1. The iocg is in the process of being deactivated by the periodic timer.
2. A bio enters ioc_rqos_throttle(), calls iocg_activate() which returns
without anything because it still sees that the iocg is already active.
3. The iocg is deactivated.
4. The bio from #2 is over budget but needs to be forced. It increases
abs_vdebt and goes over the threshold and enables use_delay.
5. IO control is enabled for the iocg's subtree and now IOs are attributed
to the descendant cgroups and the iocg itself no longer issues IOs.
This leaves the iocg with stuck abs_vdebt - it has debt but inactive and no
further IOs which can activate it. This can end up unduly punishing all the
descendants cgroups.
The usual throttling path has the same issue - the iocg must be active while
throttled to ensure that future event will wake it up - and solves the
problem by synchronizing the throttling path with a spinlock. abs_vdebt
handling is another form of overage handling and shares a lot of
characteristics including the fact that it isn't in the hottest path.
This patch fixes the above and other possible races by strictly
synchronizing abs_vdebt and use_delay handling with iocg->waitq.lock.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Vlad Dmitriev <vvd@fb.com>
Cc: stable@vger.kernel.org # v5.4+
Fixes: e1518f63f2 ("blk-iocost: Don't let merges push vtime into the future")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
kvm test Makefile doesn't fully support cross-builds and installs.
UNAME_M = $(shell uname -m) variable is used to define the target
programs and libraries to be built from arch specific sources in
sub-directories.
For cross-builds to work, UNAME_M has to map to ARCH and arch specific
directories and targets in this Makefile.
UNAME_M variable to used to run the compiles pointing to the right arch
directories and build the right targets for these supported architectures.
TEST_GEN_PROGS and LIBKVM are set using UNAME_M variable.
LINUX_TOOL_ARCH_INCLUDE is set using ARCH variable.
x86_64 targets are named to include x86_64 as a suffix and directories
for includes are in x86_64 sub-directory. s390x and aarch64 follow the
same convention. "uname -m" doesn't result in the correct mapping for
s390x and aarch64. Fix it to set UNAME_M correctly for s390x and aarch64
cross-builds.
In addition, Makefile doesn't create arch sub-directories in the case of
relocatable builds and test programs under s390x and x86_64 directories
fail to build. This is a problem for native and cross-builds. Fix it to
create all necessary directories keying off of TEST_GEN_PROGS.
The following use-cases work with this change:
Native x86_64:
make O=/tmp/kselftest -C tools/testing/selftests TARGETS=kvm install \
INSTALL_PATH=$HOME/x86_64
arm64 cross-build:
make O=$HOME/arm64_build/ ARCH=arm64 HOSTCC=gcc \
CROSS_COMPILE=aarch64-linux-gnu- defconfig
make O=$HOME/arm64_build/ ARCH=arm64 HOSTCC=gcc \
CROSS_COMPILE=aarch64-linux-gnu- all
make kselftest-install TARGETS=kvm O=$HOME/arm64_build ARCH=arm64 \
HOSTCC=gcc CROSS_COMPILE=aarch64-linux-gnu-
s390x cross-build:
make O=$HOME/s390x_build/ ARCH=s390 HOSTCC=gcc \
CROSS_COMPILE=s390x-linux-gnu- defconfig
make O=$HOME/s390x_build/ ARCH=s390 HOSTCC=gcc \
CROSS_COMPILE=s390x-linux-gnu- all
make kselftest-install TARGETS=kvm O=$HOME/s390x_build/ ARCH=s390 \
HOSTCC=gcc CROSS_COMPILE=s390x-linux-gnu- all
No regressions in the following use-cases:
make -C tools/testing/selftests TARGETS=kvm
make kselftest-all TARGETS=kvm
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Since XFAIL (Expected Failure) is expected to fail the test, which
means that test case works as we expected. IOW, XFAIL is same as
PASS. So make it green.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Currently, ftracetest will return 1 (failure) if any unresolved cases
are encountered. The unresolved status results from modules and
programs not being available, and as such does not indicate any
issues with ftrace itself. As such, change the behaviour of
ftracetest in line with unsupported cases; if unsupported cases
happen, ftracetest still returns 0 unless --fail-unsupported. Here
--fail-unresolved is added and the default is to return 0 if
unresolved results occur.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
wakeup_rt.tc and wakeup.tc tests in tracers/ subdirectory
fail due to the chrt command returning:
chrt: failed to set pid 0's policy: Operation not permitted.
To work around this, temporarily disable grout RT scheduling
during ftracetest execution. Restore original value on
test run completion. With these changes in place, both
tests consistently pass.
Fixes: c575dea2c1 ("selftests/ftrace: Add wakeup_rt tracer testcase")
Fixes: c1edd060b4 ("selftests/ftrace: Add wakeup tracer testcase")
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This kselftest update for Linux 5.7-rc4 consists of:
- ftrace test fixes to check for required filter files and kprobe args.
- Kselftest build/cross-build dependency check script to make it easier
for test ring admins/users to configure build systems correctly for
build/cross-build kselftests. Currently checks library dependencies.
- Checks if Kselftests can be built/cross-built on a system running
compile test on a trivial C file with LDLIBS specified for each
individual test in their Makefiles.
- Prints suggested target list for a system filtering out tests
failed the build dependency check from the TARGETS in Selftests
the main Makefile when optional -p is specified.
- Prints pass/fail dependency check for each tests/sub-test.
- Prints pass/fail targets and libraries.
- Default: runs dependency checks on all tests.
- Optional test name can be specified to check dependencies for it.
-----BEGIN PGP SIGNATURE-----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=/gZD
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest updates from Shuah Khan:
- ftrace test fixes to check for required filter files and kprobe args.
- Kselftest build/cross-build dependency check script to make it easier
for test ring admins/users to configure build systems correctly for
build/cross-build kselftests. Currently checks library dependencies.
- Checks if Kselftests can be built/cross-built on a system running
compile test on a trivial C file with LDLIBS specified for each
individual test in their Makefiles.
- Prints suggested target list for a system filtering out tests
failed the build dependency check from the TARGETS in Selftests
the main Makefile when optional -p is specified.
- Prints pass/fail dependency check for each tests/sub-test.
- Prints pass/fail targets and libraries.
- Default: runs dependency checks on all tests.
- Optional test name can be specified to check dependencies for it.
* tag 'linux-kselftest-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/ftrace: Check the first record for kprobe_args_type.tc
selftests: add build/cross-build dependency check script
selftests/ftrace: Check required filter files before running test
Randy reported that objtool got stuck in an infinite loop when
processing drivers/i2c/busses/i2c-parport.o. It was caused by the
following code:
00000000000001fd <line_set>:
1fd: 48 b8 00 00 00 00 00 movabs $0x0,%rax
204: 00 00 00
1ff: R_X86_64_64 .rodata-0x8
207: 41 55 push %r13
209: 41 89 f5 mov %esi,%r13d
20c: 41 54 push %r12
20e: 49 89 fc mov %rdi,%r12
211: 55 push %rbp
212: 48 89 d5 mov %rdx,%rbp
215: 53 push %rbx
216: 0f b6 5a 01 movzbl 0x1(%rdx),%ebx
21a: 48 8d 34 dd 00 00 00 lea 0x0(,%rbx,8),%rsi
221: 00
21e: R_X86_64_32S .rodata
222: 48 89 f1 mov %rsi,%rcx
225: 48 29 c1 sub %rax,%rcx
find_jump_table() saw the .rodata reference and tried to find a jump
table associated with it (though there wasn't one). The -0x8 rela
addend is unusual. It caused find_jump_table() to send a negative
table_offset (unsigned 0xfffffffffffffff8) to find_rela_by_dest().
The negative offset should have been harmless, but it actually threw
for_offset_range() for a loop... literally. When the mask value got
incremented past the end value, it also wrapped to zero, causing the
loop exit condition to remain true forever.
Prevent this scenario from happening by ensuring the incremented value
is always >= the starting value.
Fixes: 74b873e49d ("objtool: Optimize find_rela_by_dest_range()")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Julien Thierry <jthierry@redhat.com>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/02b719674b031800b61e33c30b2e823183627c19.1587842122.git.jpoimboe@redhat.com
Linus Torvalds
John Hubbard
Amit Cohen
Ido Schimmel
David S. Miller
Jason A. Donenfeld
Andrii Nakryiko
Matthieu Baerts
Yonghong Song
Sumanth Korikkar
Steven Rostedt (VMware)
Michael Ellerman
Po-Hsu Lin
Gustavo A. R. Silva
John Stultz
Paolo Bonzini
Kees Cook
Roman Penyaev
Yunfeng Ye
Josh Poimboeuf
Peter Xu
Eric Dumazet
Tejun Heo
Shuah Khan
Masami Hiramatsu
Alan Maguire