This was tested and verified with:
make dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200127091806.11403-1-dafna.hirschfeld@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_pcm_open() operation order is not good.
At first, soc_pcm_open() operation order is
1) CPU DAI startup
2) Component open
3) Codec DAI startup
4) rtd startup
But here, 2) will call try_module_get() if component has
module_get_upon_open flags. This means 1) CPU DAI startup
will be operated *before* its module was loaded.
DAI should be called *after* Component.
Second, soc_pcm_close() operation order is
1) CPU DAI shutdown
2) Codec DAI shutdown
3) rtd shutdown
4) Component close
soc_pcm_open() and soc_pcm_close() are paired function,
but, its operation order is unbalance.
This patch tidyup soc_pcm_open() order to Component -> rtd -> DAI.
This is one of prepare for cleanup soc-pcm-open()
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/871rr3cext.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch moves soc_pcm_close() next to soc_pcm_open().
This is prepare for soc_pcm_open() cleanup.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/8736bjcexx.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current soc_pcm_open() calls snd_soc_component_open() under loop.
Thus, it needs to care about opened/not-yet-opened Component.
But, if soc-component.c is handling it, soc-pcm.c don't need to care
about it.
This patch adds opened flag to soc-component.h, and simplify soc-pcm.c.
This is one of prepare for cleanup soc-pcm-open()
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/874kvzcey1.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Da7219 and max98357a share the same I2S lines. When writing audio data
to the I2S, both codecs generate sound.
Da7219 already has a separate control "Headphone Switch". Adds a new
control "Speakers Switch" for turning on/off max98357a. Userspace
program can decide to turn on/off which codecs by different use cases.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200212124608.2.I5fa3fdca69dbb5d3dd5031c939b9b24095065a94@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
Some machine may share the same I2S lines for multiple codecs. For
example, mediatek/mt8183/mt8183-da7219-max98357 shares the same lines
between max98357a and da7219. When writing audio data through the I2S
lines, all codecs on the lines would try to generate sound if they
accepts DO line. As a result, multiple codecs generate sound at a
time.
Moves control of SD_MODE to DAPM so that machine drivers have chances
to manipulate DAPM widget to turn on/off max98357a.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200212124608.1.I73b26b5e319de173d05823e79f5861bf1826261c@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertenly introduced[3] to the codebase from now on.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200211200549.GA12072@embeddedor
Signed-off-by: Mark Brown <broonie@kernel.org>
The alignment of the continuation of the devm_ioremap() call in
fsi_probe() was broken. Join the lines, as all parameters can fit on a
single line.
Fixes: 4bdc0d676a ("remove ioremap_nocache and devm_ioremap_nocache")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200212085008.9652-1-geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
Some DMA engines can have big FIFOs which adds to the latency.
The DMAengine framework can report the FIFO utilization in bytes. Use this
information for the delay reporting.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200210153336.10218-1-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current soc_pcm_open() calls snd_soc_dai_startup() under loop.
Thus, it needs to care about started/not-yet-started codec DAI.
But, if soc-dai.c is handling it, soc-pcm.c don't need to care
about it.
This patch adds started flag to soc-dai.h, and simplify soc-pcm.c.
This is one of prepare for cleanup soc-pcm-open()
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/875zgfcey5.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current soc-pcm is using bit-OR'ed error
ret |= snd_soc_component_close(component, substream);
ret |= snd_soc_component_hw_free(component, substream);
The driver may return arbitrary error codes so they can conflict.
The bit-OR'ed error works only if the return code is always consistent.
This patch fixup it, and use *last* ret value.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/877e0vceyc.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds new for_each_dapm_widgets() macro and use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/878slbceyg.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
commit 3635bf09a8 ("ASoC: soc-pcm: add symmetry for channels and
sample bits") set 0 not only to dai->rate but also to dai->channels and
dai->sample_bits if DAI was not active at soc_pcm_close().
and
commit d3383420c9 ("ASoC: soc-pcm: move DAIs parameters cleaning into
hw_free()") moved it from soc_pcm_close() to soc_pcm_hw_free().
These happen at v3.14.
But, maybe because of branch merge conflict or something similar happen
then, soc_pcm_close() still has old settings
(care only dai->rate, doesn't care dai->channels/sample_bits).
This is 100% duplicated operation.
This patch removes soc_pcm_close() side operation which supposed to
already moved to soc_pcm_hw_free().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87a75rceyl.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC has snd_soc_runtime_activate() / snd_soc_runtime_deactivate().
These increment or decrement DAI/Component activity, but the code
difference is only +1 or -1.
This patch adds common snd_soc_runtime_action() which can get +1 or -1 as
parameter, and use it from snd_soc_runtime_activate/deactivate() to
avoid duplicate implementation.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87blq7ceyq.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some DMA engines can have big FIFOs which adds to the latency.
The DMAengine framework can report the FIFO utilization in bytes. Use this
information for the delay reporting.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200210151402.29634-1-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Trace DMA is disabled by default when the DSP is in D0I3.
Add a debug option to keep trace DMA enabled when the DSP
is in D0I3 during S0.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200129220726.31792-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch implements support for DSP D0i3 when the system
is in S0. The basic idea is to schedule a delayed work after
every successful IPC TX that checks if there are only
D0I3-compatible streams active and if so transition
the DSP to D0I3.
With the introduction of DSP D0I3 in S0, we need to
ensure that the DSP is in D0I0 before sending any new
IPCs. The exception for this would be the
compact IPCs that are used to set the DSP in
D0I3/D0I0 states.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200129220726.31792-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Amend the DSP state transition diagram in preparation
for introducing the feature to support opportunistic
DSP D0I3 state when the system is in S0.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200129220726.31792-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a helper function to check if only D0i3-compatible streams
are active.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200129220726.31792-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The DSP device substates such as D0I0/D0I3
are platform-specific. Therefore, the d0_substate
field of struct snd_sof_dev is replaced
with the dsp_power_state field which represents the current
state of the DSP. This field holds both the device state
and the platform-specific substate values.
With the DSP device substates being platform-specific,
the DSP power state transitions need to be performed in
the platform-specific suspend/resume ops as well.
In order to achieve this, the ops signature has to be
modified to pass the target device state as an
argument. The target substate will be determined by
the platform-specific ops before performing the transition.
For example, in the case of the system suspending to S0IX,
the top-level SOF device suspend callback needs to
only determine if the DSP will be entering
D3 or remain in D0. The target substate in case the device
needs to remain in D0 (D0I0 or D0I3) will be determined
by the platform-specific suspend op.
With the addition of the extended set of power states for the DSP,
the set_power_state op for HDA platforms has to be extended
to handle only the appropriate state transitions. So, the
implementation for the Intel HDA platforms is also modified.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200129220726.31792-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a new enum sof_dsp_power_states for all the possible
the DSP device states. The SOF driver currently handles
only the D0 and D3 states and support for other states
will be added later as needed.
Also, add a helper to determine the target DSP power state
based on the system suspend target.
The snd_sof_dsp_d0i3_on_suspend() function is renamed to
snd_sof_stream_suspend_ignored() to be more indicative
of what it does and it used to determine the target
DSP state during system suspend.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200129220726.31792-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the system_suspend_target field to struct snd_sof_dev
to track the intended system suspend power target. This will
be used as one of the criteria for determining the
final DSP power state.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200129220726.31792-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Unify the suspend/resume routines for both the D0I3/D3
DSP targets in sof_suspend()/sof_resume().
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200129220726.31792-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Setting the prepared flag to false marks the streams for the
hw_params to be reset upon resuming. In the case of
the D0i3-compatible streams that ignored suspend to
keep the pipeline active in the DSP during suspend,
this should not be done.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200129220726.31792-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
1.
Provides a callback (i.e. mtk_hdmi_audio_hook_plugged_cb) to hdmi-codec.
When ASoC machine driver calls hdmi_codec_set_jack_detect(), the
callback will be invoked to save plugged_cb and codec_dev parameters.
+---------+ set_jack_ +------------+ plugged_cb +----------+
| machine | ----------> | hdmi-codec | ----------> | mtk-hdmi |
+---------+ detect() +------------+ codec_dev +----------+
2.
When there is any jack status changes, mtk-hdmi will call the
plugged_cb() to notify hdmi-codec. And then hdmi-codec will call
snd_soc_jack_report().
+----------+ plugged_cb +------------+
| mtk-hdmi | ----------> | hdmi-codec | -> snd_soc_jack_report()
+----------+ codec_dev +------------+
connector_status
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200206102509.2.I230fd59de28e73934a91cb01424e25b9e84727f4@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
The assignment to ret is redundant as it is not used in the error
return path and hence can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200210092423.327499-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sound/soc/codecs/wcd934x.c: In function wcd934x_codec_hphdelay_lutbypass:
sound/soc/codecs/wcd934x.c:3395:6: warning: variable hph_comp_ctrl7 set but not used [-Wunused-but-set-variable]
commit da3e83f8bb ("ASoC: wcd934x: add audio routings")
involved this unused variable.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20200210150421.34680-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently SND_SOC_ALL_CODECS selects the config symbols for all codec
drivers. As "select" bypasses dependencies, lots of "select" statements
need explicit dependencies, which are hard to get right, and hard to
maintain[*].
Fix this by using "imply" instead, which is a weak version of "select",
and which obeys dependencies of target symbols.
Add dependencies to invisible symbols that are currently selected only
if their dependencies are fulfilled.
[*] See e.g. commit 13426feaf4 ("ASoC: wcd934x: Add missing
COMMON_CLK dependency to SND_SOC_ALL_CODECS").
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20200207091351.18133-1-geert@linux-m68k.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add SOF device and DT descriptors for i.MX8QM platform.
Signed-off-by: Paul Olaru <paul.olaru@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200210095817.13226-4-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
i.MX8QM and i.MX8QXP are mostly identical platforms with minor hardware
differences. One of these differences affects the firmware boot process,
requiring the run operation to differ. All other ops are reused.
Signed-off-by: Paul Olaru <paul.olaru@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200210095817.13226-3-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
i.MX8 and i.MX8X platforms are very similar and were treated the same.
Anyhow, we need to account for the differences somehow.
Current supported platform is i.MX8QXP which is from i.MX8X family.
Rename i.MX8 platform to i.MX8X to prepare for future i.MX8 platforms.
Signed-off-by: Paul Olaru <paul.olaru@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200210095817.13226-2-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Variable idx is being assigned with a value that is never idx, it is
assigned a new value a couple of statements later. The assignment is
redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20200208221529.37105-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently function sst_platform_get_resources always returns zero and
error return codes set by the function are never returned. Fix this
by returning the error return code in variable ret rather than the
hard coded zero.
Addresses-Coverity: ("Unused value")
Fixes: f533a035e4 ("ASoC: Intel: mrfld - create separate module for pci part")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200208220720.36657-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Do not print an error trace when deferring probe for I2S driver.
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Link: https://lore.kernel.org/r/20200203100814.22944-7-olivier.moysan@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Do not print an error trace when deferring probe for SPDIFRX driver.
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Link: https://lore.kernel.org/r/20200203100814.22944-6-olivier.moysan@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Do not print an error trace when deferring probe for SAI driver.
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Link: https://lore.kernel.org/r/20200203100814.22944-5-olivier.moysan@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Return an error when the i2s driver fails to get a reset controller.
Also add an error trace, except on probe defer status.
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Link: https://lore.kernel.org/r/20200203100814.22944-4-olivier.moysan@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Return an error when the SPDIFRX driver fails to get a reset controller.
Also add an error trace, except on probe defer status.
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Link: https://lore.kernel.org/r/20200203100814.22944-3-olivier.moysan@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Return an error when the SAI driver fails to get a reset controller.
Also add an error trace, except on probe defer status.
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Link: https://lore.kernel.org/r/20200203100814.22944-2-olivier.moysan@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Tzung-Bi Shih
Geert Uytterhoeven
Dafna Hirschfeld
Kuninori Morimoto
Gustavo A. R. Silva
Geert Uytterhoeven
Mark Brown
Peter Ujfalusi
Ranjani Sridharan
Colin Ian King
YueHaibing
Paul Olaru
Olivier Moysan