Граф коммитов

57 Коммитов

Автор SHA1 Сообщение Дата
Jaya Kumar 0e27aa3dab fbdev: platforming hecubafb and n411
This patch splits hecubafb into the platform independent hecubafb and the
platform dependent n411.

Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:41 -07:00
Jaya Kumar 03c33a4f00 fbdev: platforming metronomefb and am200epd
This patch splits metronomefb into the platform independent metronomefb and
the platform dependent am200epd.

Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:41 -07:00
Nicolas Ferre fd0858017e atmel_lcdfb: wiring BGR to RGB color mode
Adds different wiring mode for the LCD screen.

The legacy atmel LCDC IP uses a non standard color mode, "BGR-555.1" instead
"RGB-565".  The major part of graphic stacks for embedded systems uses only
"RGB-565".  It is possible to swap LCD IOs instead of doing this bit swapping
by software (See application note AT91SAM9 LCD Controller
http://www.atmel.com/dyn/resources/prod_documents/doc6300.pdf)

This wire swapping is done on the at91sam9rl-ek board (board code
using this patch will come later).

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Andrew Victor <avictor.za@gmail.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:39 -07:00
David Brownell cf19a37e06 atmel_lcdfb: suspend/resume support
Teach atmel_lcdfb driver how to suspend/resume.

Note that the backlight control should probably do more of the same stuff:
turning off display power (more than just the backlight) and stopping the
clocks (and dma to drive the no-longer-seen display).  No point in wasting
power to generate images that can't be observed, after all...

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Andrew Victor <avictor.za@gmail.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:38 -07:00
David Brownell a9a84c37d1 atmel_lcdfb: backlight control
On the sam9 EK boards, the LCD backlight is hooked up to a PWM output from
the LCD controller.  It's controlled by "contrast" registers though.

This patch lets boards declare that they have that kind of backlight
control.  The driver can then export this control, letting screenblank and
other operations actually take effect ...  reducing the typically
substantial power drain from the backlight.

Note that it's not fully cooked
  - doesn't force backlight off during system suspend
  - the "power" and "blank" events may not be done right
This should be easily added in the future.

[nicolas.ferre@atmel.com: remove unneeded inline and rename functions]
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Andrew Victor <linux@maxim.org.za>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06 10:41:16 -08:00
Haavard Skinnemoen 162b3a0849 atmel_lcdfb: validate display timings
Setting a display timing parameter too high or too low may cause it to
wrap around and thus become completely wrong. Validate the timings in
atmel_lcdfb_check_var() and saturate to the highest or lowest possible
value if necessary.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06 10:41:15 -08:00
Rusty Russell ee8e7cfe9d Make asm-x86/bootparam.h includable from userspace.
To actually write a bootloader (or, say, the lguest launcher)
currently requires duplication of these structures.  Making them
includable from userspace is much nicer.

We merge the common userspace-required definitions of e820_32/64.h
into e820.h for export.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-23 15:49:47 +10:00
Jiri Slaby 93043ece03 define global BIT macro
define global BIT macro

move all local BIT defines to the new globally define macro.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Kumar Gala <galak@gate.crashing.org>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Cc: "John W. Linville" <linville@tuxdriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:42 -07:00
Krzysztof Helt 2a36f9c497 pm2fb: hardware cursor support for the Permedia2
This patch adds hardware cursor support for the Permedia 2 chip.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:43:18 -07:00
Krzysztof Helt e84d436b3c pm3fb: header file cleanup
This patch fixes white spaces, redudant definitions and formating in the pm3fb
header file.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:43:18 -07:00
Krzysztof Helt 8f5d050af1 pm2fb: Permedia 2V hardware cursor support
This patch adds hardware cursor support for Permedia 2V chips.
The hardware cursor is disabled by default. It does not blink - the
same issue is mentioned in the x11 driver.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:43:16 -07:00
Krzysztof Helt 0960bd3db1 tdfxfb: mtrr support
This patch adds mtrr support to the tdfxfb driver.  It also kills one
redundant include and initialization value.

[akpm@linux-foundation.org: cleanups]
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:43:15 -07:00
Krzysztof Helt 90b0f08536 tdfxfb: hardware cursor
This patch adds hardware cursor support to the tdfxfb driver.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:43:15 -07:00
Krzysztof Helt 4f05b53b28 tdfxfb: code improvements
This patch improves source code mainly by killing redundant variable loads,
reducing number of variables, simplifying conditional branches, etc.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:43:15 -07:00
Krzysztof Helt 8af1d50f7f tdfxfb: coding style improvement
This patch contains coding style improvements to the tdfxfb driver (white
spaces, indentations, long lines).

It also moves fb_ops structure to the end of file, so forward declarations of
ops functions are redundant.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:43:15 -07:00
Raphael Assenat ba282daa91 mbxfb: Improvements and new features
This contains the following changes:

* Overlay surface alpha is configured separately from the overlay. This
prevents display glitches (configure and fill the overlay first, set
alpha to a visible value next)

* Added an ioctl for configuring transparency of the Overlay and graphics
planes. Blend mode, colorkey mode and global alpha mode are supported.

* Added an ioctl for setting the plane order. The overlay plance can be placed
over or
under the graphics plane.

* Added an ioctl for setting and reading chip registers, with mask.

* Updated copyright for 2007

[adaplas]
* Coding style changes

Signed-off-by: Raphael Assenat <raph@8d.com>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:43:14 -07:00
Krzysztof Helt 138a451cce pm2fb: Permedia 2V initialization fixes
This patch:
- initializes correctly the Permedia2V chip if it is not initialized by BIOS
- puts back clock frequency for the ELSA WINNER board to 100kHz
- fixes returned error values from setcolreg() function
- uses more general classes for PCI ids

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:43:14 -07:00
Krzysztof Helt 91b3a6f4cd pm2fb: accelerated imageblit
This patch adds accelerated imageblit function.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:43:14 -07:00
Krzysztof Helt f259ebb67b pm3fb: header file reduction
This patch removes constants named AAA_DISABLE with value 0. They are redudant
and misleading ( a |= AAA_DISABLE does nothing and usually should be
a &= ~AAA_ENABLE).

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:43:14 -07:00
Krzysztof Helt e7f76df964 pm3fb: copyarea and partial imageblit suppor
This patch adds accelerated copyarea and partially accelerated imageblit
functions. There is also fixed one register address in the pm3fb.h file.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:43:14 -07:00
Michal Januszewski 8bdb3a2d7d uvesafb: the driver core
uvesafb is an enhanced version of vesafb.  It uses a userspace helper (v86d)
to execute calls to the x86 Video BIOS functions.  The driver is not limited
to any specific arch and whether it works on a given arch or not depends on
that arch being supported by the userspace daemon.  It has been tested on
x86_32 and x86_64.

A single BIOS call is represented by an instance of the uvesafb_ktask
structure.  This structure contains a buffer, a completion struct and a
uvesafb_task substructure, containing the values of the x86 registers, a flags
field and a field indicating the length of the buffer.  Whenever a BIOS call
is made in the driver, uvesafb_exec() builds a message using the uvesafb_task
substructure and the contents of the buffer.  This message is then assigned a
random ack number and sent to the userspace daemon using the connector
interface.

The message's sequence number is used as an index for the uvfb_tasks array,
which provides a mapping from the messages coming from userspace to the
in-kernel uvesafb_ktask structs.

The userspace daemon performs the requested operation and sends a reply in the
form of a uvesafb_task struct and, optionally, a buffer.  The seq and ack
numbers in the reply should be exactly the same as those in the request.

Each message from userspace is processed by uvesafb_cn_callback() and after
passing a few sanity checks leads to the completion of a BIOS call request.

Signed-off-by: Michal Januszewski <spock@gentoo.org>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Paulo Marques <pmarques@grupopie.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:43:13 -07:00
Yoichi Yuasa 541510fc28 remove tx3912fb
Remove tx3912fb.  Nino has already removed.  It is no longer needed.

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31 15:39:41 -07:00
Antonino A. Daplas eb3daa83c2 tgafb: actually allocate memory for the pseudo_palette
No memory allocation was done for the pseudo_palette.  Allocate one for it.

Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Acked-by: "Maciej W. Rozycki" <macro@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:23:12 -07:00
Nicolas Ferre 1434058614 atmel_lcdfb: AT91/AT32 LCD Controller framebuffer driver
Adds a framebuffer driver to ATMEL AT91SAM9x and AT32 aka AVR32 platforms.
Those chips share quite the same IP and this code is suitable for both
architectures.

Signed-off-by: Nicolas Ferre <nicolas.ferre@rfo.atmel.com>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-11 08:29:37 -07:00
Krzysztof Helt f23a06f076 pm3fb: Preliminary 2.4 to 2.6 port
This is a basic port from 2.4 kernel to 2.6.  Acceleration is lost and big
endian support probably too.  The driver works in 8, 16 and 32 bit mode.

[adaplas]
- change VESA_* to FB_BLANK_* constants
- removed unused function clear_memory
- fix uninitialized variable compiler warning
- some whitespace cleaning

[akpm@linux-foundation.org: Nuke pestiferous CVS string]
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-11 08:29:37 -07:00
Ville Syrjala 159dde9369 atyfb: halve XCLK with Mobility and 32bit memory
Laptops with Rage Mobility and 32bit memory interface seem to require halved
XCLK to operate correctly.

Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:32 -07:00
Krzysztof Helt e5d809d774 pm2fb: Permedia 2V memory clock setting
Permedia 2V uses its own registers to set a memory clock. The
patch adds these registers and uses them in the set_memclock()
function.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:32 -07:00
Maciej W. Rozycki 86c6f7d08b tgafb: TURBOchannel support
This is support for the TC variations of the TGA boards (properly known as
SFB+ or Smart Frame Buffer Plus boards).  The 8-plane SFB+ board uses the
Bt459 RAMDAC (unlike its PCI TGA counterpart, which uses the Bt485), so
bits have been added to support this chip as well.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: James Simmons <jsimmons@infradead.org>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:27 -07:00
Jiri Slaby c4f28e54d6 [PATCH] Video: fb, add true ref_count atomicity
Some of fb drivers uses atomic_t in bad manner, since there are still some
race-prone gaps.  Use mutexes to protect open/close code sections with
ref_count testing and finally use simple uint.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Acked-by: Denis Oliver Kropp <dok@directfb.org>
Cc: James Simmons <jsimmons@infradead.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 09:48:42 -08:00
Adrian Bunk 52e7c922f3 [PATCH] remove the broken FB_S3TRIO driver
The FB_S3TRIO driver:
- has been marked as BROKEN for more than two years and
- is still marked as BROKEN.

Drivers that had been marked as BROKEN for such a long time seem to be
unlikely to be revived in the forseeable future.

But if anyone wants to ever revive this driver, the code is still
present in the older kernel releases.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: James Simmons <jsimmons@infradead.org>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 09:48:42 -08:00
Helge Deller 0743b86800 [PATCH] sstfb: add sysfs interface
Modify the sstfb (Voodoo1/2) driver:

- fix a memleak when removing the sstfb module

- fix sstfb to use the fbdev default videomode database

- add module option "mode_option" to set initial screen mode

- add sysfs-interface to turn VGA-passthrough on/off via
  /sys/class/graphics/fbX/vgapass

- remove old debug functions from ioctl interface

Signed-off-by: Helge Deller <deller@gmx.de>
Acked-By: James Simmons <jsimmons@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13 09:05:55 -08:00
Mariusz Kozlowski f4b85dc0a1 [PATCH] video: pm3fb macros fix
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:29:08 -08:00
Raphael Assenat ea465250d4 [PATCH] mbxfb: Add YUV video overlay support
This patch adds a way to create and use the video plane (YUV overlay) and
scaling video scaling features of the chip.

The overlay is configured, resized and modified using a device specific
ioctl.

Also included in this patch:
  - If no platform data was passed, print an error and exit instead of crashing.
  - Added a write_reg(_dly) macro. This improves readability when
    manipulating chip registers. (no more udelay() after each write).
  - Comments about some issues.

Signed-off-by: Raphael Assenat <raph@8d.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Acked-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:29:06 -08:00
Uwe Zeisberger f30c226954 fix file specification in comments
Many files include the filename at the beginning, serveral used a wrong one.

Signed-off-by: Uwe Zeisberger <Uwe_Zeisberger@digi.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-03 23:01:26 +02:00
Alan Cox b98fc9a34b [PATCH] sstfb: cleanups
- Remove 24/32bit unused support (the chips don't do 24/32bit anyway)
- Clean up printk obfuscation
- Clean up lispitus in the if(())()) stuff
- Minor tidying

No functionality changes, may have a crack at hardware scrolling based
on my X driver once the cleanups are in.

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Antonino A. Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 08:04:13 -07:00
David Woodhouse fadcfa33b6 [HEADERS] One line per header in Kbuild files to reduce conflicts
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-19 12:43:58 +01:00
Mike Rapoport 22caf04297 [PATCH] mbxfb: Add framebuffer driver for the Intel 2700G
Add frame buffer driver for the 2700G LCD controller present on CompuLab
CM-X270 computer module.

[adaplas]
- Add more informative help text to Kconfig
- Make DEBUG a Kconfig option as FB_MBX_DEBUG
- Remove #include mbxdebug.c, this is frowned upon
- Remove redundant casts
- Arrange #include's alphabetically
- Trivial whitespace

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-14 21:53:55 -07:00
David Woodhouse 8555255f0b Add generic Kbuild files for 'make headers_install'
This adds the Kbuild files listing the files which are to be installed by
the 'headers_install' make target, in generic directories.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-06-18 12:14:01 +01:00
David Woodhouse 62c4f0a2d5 Don't include linux/config.h from anywhere else in include/
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-04-26 12:56:16 +01:00
Rusty Russell 8d3b33f67f [PATCH] Remove MODULE_PARM
MODULE_PARM was actually breaking: recent gcc version optimize them out as
unused.  It's time to replace the last users, which are generally in the
most unloved drivers anyway.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25 08:22:52 -08:00
Christian Trefzer 9f672004ab [PATCH] neofb: avoid resetting display config on unblank (v2)
There were two mistakes in the register-read-on-(un)blank approach.

- First, without proper register (un)locking the value read back will always
  be zero, and this is what I missed entirely until just now.  Due to this,
  the logic could not be verified at all and I tried some bogus checks which
  are completely stupid.

- Second, the LCD status bit will always be set to zero when the backlight
  has been turned off.  Reading the value back during unblank will disable the
  LCD unconditionally, regardless of the state it is supposed to be in, since
  we set it to zero beforehand.

So this is what we do now:

- create a new variable in struct neofb_par, and use that to determine
  whether to read back registers (initialized to true)

- before actually blanking the screen, read back the register to sense any
  possible change made through Fn key combo

- use proper neoUnlock() / neoLock() to actually read something

- every call to neofb_blank() determines if we read back next time: blanking
  disables readback, unblanking (FB_BLANK_UNBLANK) enables it

This should give us a nice and clean state machine.  Has been thoroughly
tested on a Dell Latitude CPiA / NM220 Chip docked to a C/Dock2 with attached
CRT in all possible combinations of LCD/CRT on/off.  I changed the config via
Fn key, let the console blank, unblanked by keypress - works flawlessly.

Signed-off-by: Christian Trefzer <ctrefzer@gmx.de>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-15 15:32:21 -08:00
Adrian Bunk 3f08ff4a4d [PATCH] include/video/newport.h: "extern inline" -> "static inline"
"extern inline" doesn't make much sense.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 08:01:50 -08:00
Antonino A. Daplas 7227576f4b [PATCH] fbdev: sstfb: Driver cleanups
- remove unneeded casts
- make setcolreg return success if regno > 15, but don't do anything
- use framebuffer_alloc/framebuffer_release to allocate/free memory

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 08:01:46 -08:00
Antonino A. Daplas a807f618b6 [PATCH] fbdev: tdfxfb: Driver cleanups
- remove unneeded casts
- move memory for pseudo_palette inside struct tdfxfb_par
- whitespace changes

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 08:01:46 -08:00
Antonino A. Daplas 9f19bc56c3 [PATCH] fbdev: neofb: Driver cleanups
- remove unneeded casts
- move memory for pseudo_palette inside struct neofb_par

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 08:01:45 -08:00
Antonino A. Daplas a26968df01 [PATCH] fbdev: kyrofb: Driver cleanups
- remove unneeded casts

- use framebuffer_alloc/framebuffer_release to allocate/free memory

- the pseudo_palette is always u32 regardless of bpp if using generic
  drawing functions

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 08:01:45 -08:00
Knut Petersen 44637a12f8 [PATCH] Update cyblafb driver
This is a major update to the cyblafb framebuffer driver. Most
of the stuff has been tested in the mm tree.

Main advantages:
============
  - vxres > xres support
  - ywrap and xpan support
  - much faster for almost all modes (e.g. 1280x1024-16bpp
     draws more than 41 full screens of text instead of about 25
     full screens of text per second on authors Epia 5000)
  - module init/exit code fixed
  - bugs triggered by console rotation fixed
  - lots of minor improvements
  - startup modes suitable for high performance scrolling
     in all directions

This diff  also contains a lot of white space fixes.

No side effects are possible, only one single graphics core is affected.

Signed-off-by: Knut Petersen <Knut_Petersen@t-online.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-09 10:00:36 -08:00
Tobias Klauser 82006d0841 [PATCH] drivers/video: Replace custom macro with isdigit()
Replace the custom CHAR_IS_NUM() macro with isdigit() from <linux/ctype.h>

Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch>
Acked-by: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-13 08:22:33 -07:00
Richard Purdie 513b6e1afa [PATCH] SharpSL: Abstract c7x0 specifics from Corgi Touchscreen driver
Separate out the Sharp Zaurus c7x0 series specific code from the Corgi
Touchscreen driver.  Use the new functions in corgi_lcd.c via sharpsl.h for
hsync handling and pass the IRQ as a platform device resource.  Move a
function prototype into the w100fb header file where it belongs.

This enables the driver to be used by the Zaurus cxx00 series.

Signed-Off-by: Richard Purdie <rpurdie@rpsys.net>
Cc: Vojtech Pavlik <vojtech@suse.cz>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-13 08:22:31 -07:00
Knut Petersen 9fa68eae9f [PATCH] framebuffer: new driver for cyberblade/i1 graphics core
This is a framebuffer driver for the Cyberblade/i1 graphics core.

Currently tridenfb claims to support the cyberblade/i1 graphics core.  This
is of very limited truth.  Even vesafb is faster and provides more working
modes and a much better quality of the video signal.  There is a great
number of bugs in tridentfb ...  but most often it is impossible to decide
if these bugs are real bugs or if fixing them for the cyberblade/i1 core
would break support for one of the other supported chips.

Tridentfb seems to be unmaintained,and documentation for most of the
supported chips is not available.  So "fixing" cyberblade/i1 support inside
of tridentfb was not an option, it would have caused numerous
if(CYBERBLADEi1) else ...  cases and would have rendered the code to be
almost unmaintainable.

A first version of this driver was published on 2005-07-31.  A fix for a
bug reported by Jochen Hein was integrated as well as some changes
requested by Antonino A.  Daplas.

A message has been added to tridentfb to inform current users of tridentfb
to switch to cyblafb if the cyberblade/i1 graphics core is detected.

This patch is one logical change, but because of the included documentation
it is bigger than 70kb.  Therefore it is not sent to lkml and
linux-fbdev-devel,

Signed-off-by: Knut Petersen <Knut_Petersen@t-online.de>
Cc: Muli Ben-Yehuda <mulix@mulix.org>
Acked-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 13:58:02 -07:00