Граф коммитов

20 Коммитов

Автор SHA1 Сообщение Дата
Marc Zyngier 0e5cb77706 irqchip/gic: Split vGIC probing information from the GIC code
The vGIC advertising code is unsurprisingly very much tied to
the GIC implementations. However, we are about to extend the
support to lesser implementations.

Let's dissociate the vgic registration from the GIC code and
move it into KVM, where it makes a bit more sense. This also
allows us to mark the gic_kvm_info structures as __initdata.

Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-06-01 10:45:58 +01:00
Marc Zyngier 3567c6ca47 irqchip/gic-common: Don't enable SGIs by default
The architecture code now enables the IPIs as required, so no
need to enable SGIs by default in the GIC code.

Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17 16:37:27 +01:00
Marc Zyngier 25edaed6c7 irqchip/gic: Skip DT quirks when evaluating IIDR-based quirks
When evaluating potential quirks matched by reads of the IIDR
register, skip the quirk entries that use a "compatible"
property attached to them, as these are DT based.

Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-20 10:23:35 +01:00
Marc Zyngier 1a60e1e643 irqchip/gic: Prepare for more than 16 PPIs
GICv3.1 allows up to 80 PPIs (16 legaci PPIs and 64 Extended PPIs),
meaning we can't just leave the old 16 hardcoded everywhere.

We also need to add the infrastructure to discover the number of PPIs
on a per redistributor basis, although we still pretend there is only
16 of them for now.

No functional change.

Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-20 10:23:34 +01:00
Marc Zyngier 13d22e2e1f irqchip/gic: Rework gic_configure_irq to take the full ICFGR base
gic_configure_irq is currently passed the (re)distributor address,
to which it applies an a fixed offset to get to the configuration
registers. This offset is constant across all GICs, or rather it was
until to v3.1...

An easy way out is for the individual drivers to pass the base
address of the configuration register for the considered interrupt.
At the same time, move part of the error handling back to the
individual drivers, as things are about to change on that front.

Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-20 10:04:09 +01:00
Thomas Gleixner caab277b1d treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 234
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation this program is
  distributed in the hope that it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details you should have received a copy of the gnu general
  public license along with this program if not see http www gnu org
  licenses

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 503 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Enrico Weigelt <info@metux.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19 17:09:07 +02:00
Srinivas Kandagatla f70fdb42a0 irqchip/gic: Add support to device tree based quirks
This patch adds support to device tree based quirks based on
device tree compatible string.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-12-13 17:23:37 +00:00
Aniruddha Banerjee aa08192a25 irqchip/gic: Take lock when updating irq type
Most MMIO GIC register accesses use a 1-hot bit scheme that
avoids requiring any form of locking. This isn't true for the
GICD_ICFGRn registers, which require a RMW sequence.

Unfortunately, we seem to be missing a lock for these particular
accesses, which could result in a race condition if changing the
trigger type on any two interrupts within the same set of 16
interrupts (and thus controlled by the same CFGR register).

Introduce a private lock in the GIC common comde for this
particular case, making it cover both GIC implementations
in one go.

Cc: stable@vger.kernel.org
Signed-off-by: Aniruddha Banerjee <aniruddhab@nvidia.com>
[maz: updated changelog]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-03-29 11:47:50 +01:00
Ard Biesheuvel 9d111d4910 irqchip/gic: Make quirks matching conditional on init return value
As it turns out, the IIDR is not sufficient to distinguish between GICv3
implementations when it comes to enabling quirks. So update the prototype
of the init() hook to return a bool, and interpret a 'false' return value
as no match, in which case the 'enabling workaround' log message should
not be printed.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-10-19 11:22:38 +01:00
Jon Hunter cdbb813db6 irqchip/gic: Prepare for adding platform driver
To support GICs that require runtime power management, it is necessary
to add a platform driver, so that the probing of the chip can be
deferred if resources, such as a power-domain, is not yet available.

To prepare for adding a platform driver:
 1. Drop the __init section from the gic_dist_config() so this can be
    re-used by the platform driver.
 2. Add prototypes for functions required by the platform driver to the
    GIC header file so they can be re-used.

Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-06-13 11:53:52 +01:00
Linus Torvalds 7beaa24ba4 Small release overall.
- x86: miscellaneous fixes, AVIC support (local APIC virtualization,
 AMD version)
 
 - s390: polling for interrupts after a VCPU goes to halted state is
 now enabled for s390; use hardware provided information about facility
 bits that do not need any hypervisor activity, and other fixes for
 cpu models and facilities; improve perf output; floating interrupt
 controller improvements.
 
 - MIPS: miscellaneous fixes
 
 - PPC: bugfixes only
 
 - ARM: 16K page size support, generic firmware probing layer for
 timer and GIC
 
 Christoffer Dall (KVM-ARM maintainer) says:
 "There are a few changes in this pull request touching things outside
  KVM, but they should all carry the necessary acks and it made the
  merge process much easier to do it this way."
 
 though actually the irqchip maintainers' acks didn't make it into the
 patches.  Marc Zyngier, who is both irqchip and KVM-ARM maintainer,
 later acked at http://mid.gmane.org/573351D1.4060303@arm.com
 "more formally and for documentation purposes".
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJXPJjyAAoJEL/70l94x66DhioH/j4fwQ0FmfPSM9PArzaFHQdx
 LNE3tU4+bobbsy1BJr4DiAaOUQn3DAgwUvGLWXdeLiOXtoWXBiFHKaxlqEsCA6iQ
 xcTH1TgfxsVoqGQ6bT9X/2GCx70heYpcWG3f+zqBy7ZfFmQykLAC/HwOr52VQL8f
 hUFi3YmTHcnorp0n5Xg+9r3+RBS4D/kTbtdn6+KCLnPJ0RcgNkI3/NcafTemoofw
 Tkv8+YYFNvKV13qlIfVqxMa0GwWI3pP6YaNKhaS5XO8Pu16HuuF1JthJsUBDzwBa
 RInp8R9MoXgsBYhLpz3jc9vWG7G9yDl5LehsD9KOUGOaFYJ7sQN+QZOusa6jFgA=
 =llO5
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM updates from Paolo Bonzini:
 "Small release overall.

  x86:
   - miscellaneous fixes
   - AVIC support (local APIC virtualization, AMD version)

  s390:
   - polling for interrupts after a VCPU goes to halted state is now
     enabled for s390
   - use hardware provided information about facility bits that do not
     need any hypervisor activity, and other fixes for cpu models and
     facilities
   - improve perf output
   - floating interrupt controller improvements.

  MIPS:
   - miscellaneous fixes

  PPC:
   - bugfixes only

  ARM:
   - 16K page size support
   - generic firmware probing layer for timer and GIC

  Christoffer Dall (KVM-ARM maintainer) says:
    "There are a few changes in this pull request touching things
     outside KVM, but they should all carry the necessary acks and it
     made the merge process much easier to do it this way."

  though actually the irqchip maintainers' acks didn't make it into the
  patches.  Marc Zyngier, who is both irqchip and KVM-ARM maintainer,
  later acked at http://mid.gmane.org/573351D1.4060303@arm.com ('more
  formally and for documentation purposes')"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (82 commits)
  KVM: MTRR: remove MSR 0x2f8
  KVM: x86: make hwapic_isr_update and hwapic_irr_update look the same
  svm: Manage vcpu load/unload when enable AVIC
  svm: Do not intercept CR8 when enable AVIC
  svm: Do not expose x2APIC when enable AVIC
  KVM: x86: Introducing kvm_x86_ops.apicv_post_state_restore
  svm: Add VMEXIT handlers for AVIC
  svm: Add interrupt injection via AVIC
  KVM: x86: Detect and Initialize AVIC support
  svm: Introduce new AVIC VMCB registers
  KVM: split kvm_vcpu_wake_up from kvm_vcpu_kick
  KVM: x86: Introducing kvm_x86_ops VCPU blocking/unblocking hooks
  KVM: x86: Introducing kvm_x86_ops VM init/destroy hooks
  KVM: x86: Rename kvm_apic_get_reg to kvm_lapic_get_reg
  KVM: x86: Misc LAPIC changes to expose helper functions
  KVM: shrink halt polling even more for invalid wakeups
  KVM: s390: set halt polling to 80 microseconds
  KVM: halt_polling: provide a way to qualify wakeups during poll
  KVM: PPC: Book3S HV: Re-enable XICS fast path for irqfd-generated interrupts
  kvm: Conditionally register IRQ bypass consumer
  ...
2016-05-19 11:27:09 -07:00
Jon Hunter 992345a58e irqchip/gic: WARN if setting the interrupt type for a PPI fails
Setting the interrupt type for private peripheral interrupts (PPIs) may
not be supported by a given GIC because it is IMPLEMENTATION DEFINED
whether this is allowed. There is no way to know if setting the type is
supported for a given GIC and so the value written is read back to
verify it matches the desired configuration. If it does not match then
an error is return.

There are cases where the interrupt configuration read from firmware
(such as a device-tree blob), has been incorrect and hence
gic_configure_irq() has returned an error. This error has gone
undetected because the error code returned was ignored but the interrupt
still worked fine because the configuration for the interrupt could not
be overwritten.

Given that this has done undetected and that failing to set the
configuration for a PPI may not be a catastrophic, don't return an error
but WARN if we fail to configure a PPI. This will allows us to fix up
any places in the kernel where we should be checking the return status
and maintain backward compatibility with firmware images that may have
incorrect PPI configurations.

Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-05-11 10:12:42 +01:00
Jon Hunter ec1a454d61 irqchip/gic: Don't unnecessarily write the IRQ configuration
If the interrupt configuration matches the current configuration, then
don't bother writing the configuration again.

Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-05-11 10:12:41 +01:00
Julien Grall 502d6df11a irqchip/gic-v2: Parse and export virtual GIC information
For now, the firmware tables are parsed 2 times: once in the GIC
drivers, the other timer when initializing the vGIC. It means code
duplication and make more tedious to add the support for another
firmware table (like ACPI).

Introduce a new structure and set of helpers to get/set the virtual GIC
information. Also fill up the structure for GICv2.

Signed-off-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-03 12:54:21 +02:00
Marc Zyngier 0eece2b228 irqchip/gic: Make sure all interrupts are deactivated at boot
When booting a GIC/GICv3 based system, we have no idea what
state the firmware (or previous kernel in the case of kexec)
has left the GIC, and some interrupts may still be active.

In order to garantee that we have a clean state, make sure
the active bits are cleared at init time.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Russell King <linux@arm.linux.org.uk>
Link: http://lkml.kernel.org/r/1447701208-18150-3-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-11-17 14:25:58 +01:00
Robert Richter 67510ccafb irqchip/gicv3-its: Add HW revision detection and configuration
Some GIC revisions require an individual configuration to esp. add
workarounds for HW bugs. This patch implements generic code to parse
the hw revision provided by an IIDR register value and runs specific
code if hw matches. A function is added that reads the IIDR registers
for ITS (GITS_IIDR) and then goes through a list of init functions to
be called for specific versions. Same could be done for GICV3
(GICD_IIDR), but there are no users yet for it.

The patch is needed to implement workarounds for HW errata in Cavium's
ThunderX GICV3 ITS.

Signed-off-by: Robert Richter <rrichter@cavium.com>
Reviewed-by: Marc Zygnier <marc.zyngier@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Tirumalesh Chalamarla <tchalamarla@cavium.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Jason Cooper <jason@lakedaemon.net>
Link: http://lkml.kernel.org/r/1442869119-1814-5-git-send-email-rric@kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-09-29 10:10:53 +02:00
Sudeep Holla 55963c9f20 irqchip: gic: Simplify gic_configure_irq by using IRQCHIP_SET_TYPE_MASKED
GIC requires to disable the interrupt before changing the trigger type.
irqchip core provides IRQCHIP_SET_TYPE_MASKED flag and ensures that the
interrupt is masked before calling chip.irq_set_type() if the irqchip
sets the flag.

This patch adds IRQCHIP_SET_TYPE_MASKED to GIC irqchip so that the core
can manage disabling the interrupt while changing the trigger type.

Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Link: http://lkml.kernel.org/r/1433501997-19205-1-git-send-email-sudeep.holla@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-05 22:26:33 +02:00
Liviu Dudau fb7e7deb7f irqchip: gic: Allow interrupt level to be set for PPIs
During a recent cleanup of the arm64 DTs it has become clear that
the handling of PPIs in xxxx_set_type() is incorrect. The ARM TRMs
for GICv2 and later allow for "implementation defined" support for
setting the edge or level type of the PPI interrupts and don't restrict
the activation level of the signal. Current ARM implementations
do restrict the PPI level type to IRQ_TYPE_LEVEL_LOW, but licensees
of the IP can decide to shoot themselves in the foot at any time.

Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Acked-by: Marc Zyngier <Marc.Zyngier@arm.com>
Cc: LAKML <linux-arm-kernel@lists.infradead.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Haojian Zhuang <haojian.zhuang@linaro.org>
Link: http://lkml.kernel.org/r/1421772779-25764-1-git-send-email-Liviu.Dudau@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-01-26 11:38:23 +01:00
Feng Kan e5f81539f6 irqchip: gic: Replace hex numbers with defines.
This is to cleanup some hex numbers used in the code and replace
them with defines to make the code cleaner.

Signed-off-by: Feng Kan <fkan@apm.com>
Reviewed-by: Anup Patel <apatel@apm.com>
Link: https://lkml.kernel.org/r/1406757419-18729-2-git-send-email-fkan@apm.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-08-19 15:07:46 +00:00
Marc Zyngier d51d0af43b irqchip: gic: Move some bits of GICv2 to a library-type file
A few GICv2 low-level function are actually very useful to GICv3,
and it makes some sense to share them across the two drivers.
They end-up in their own file, with an additional parameter used
to ensure an optional synchronization (unused on GICv2).

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/1404140510-5382-2-git-send-email-marc.zyngier@arm.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-07-08 21:49:14 +00:00