This patch adds calling hclge_hw_error_set_state function
to re-enable the error interrupts those will be disabled on
the hw reset.
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch
- renames the enable error interrupt functions.
The reason is that these functions
are used for both enable and disable error interrupts.
- removes redundant logs from the enable error interrupt functions.
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
1.The command interface for queryng and clearing hw errors is
changed, which requires the new process error functions to be added.
This patch removes all the current process error functions and
associated definitions. The new functions to handle ras errors
would be added in this patch set.
2. Fixed order issue of the hw_blk table.
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A couple of last-minute fixes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJcCdNyAAoJECgfDbjSjVRpNAoH/A2eW0+UjIQar+jPKh1XPwN6
uOoPAS3AnXGC0qhlJb2/W77intpLmF/SMkOSNBfvg1MXYTPJRGXcjS7v7446qpZf
iCk/UEDN3Ck0OuxoR4AfO5qkbZSDGBGYDoSvB4JLufy9PTaNCrd+gBM349Fg1cRc
lkK6aXLe7vydB+x0rLyfCrBEccZ8UtmCGs1FIzd9bvDgRGzlPnPGwavX0w8lx7Jn
ZtQClajG2BjF0kMu+1hW9m781yjh7TYwshG2lYhQama5a8x3X5jOIUDNknfw3uQd
crWOPPlzIELJcWrmG2/psydNGcq1b0S6vhFbpO7BiFpvCvdW5hAMk75c7hBWpls=
=DLS0
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull vhost/virtio fixes from Michael Tsirkin:
"A couple of last-minute fixes"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost/vsock: fix use-after-free in network stack callers
virtio/s390: fix race in ccw_io_helper()
virtio/s390: avoid race on vcdev->config
vhost/vsock: fix reset orphans race with close timeout
Jiong Wang says:
====================
BPF_ALU | BPF_ARSH | BPF_* were rejected by commit: 7891a87efc
("bpf: arsh is not supported in 32 bit alu thus reject it"). As explained
in the commit message, this is due to there is no complete support for them
on interpreter and various JIT compilation back-ends.
This patch set is a follow-up which completes the missing bits. This also
pave the way for running bpf program compiled with ALU32 instruction
enabled by specifing -mattr=+alu32 to LLVM for which case there is likely
to have more BPF_ALU | BPF_ARSH insns that will trigger the rejection code.
test_verifier.c is updated accordingly.
I have tested this patch set on x86-64 and NFP, I need help of review and
test on the arch changes (mips/ppc/s390).
Note, there might be merge confict on mips change which is better to be
applied on top of:
commit: 20b880a05f06 ("mips: bpf: fix encoding bug for mm_srlv32_op"),
which is on mips-fixes branch at the moment.
Thanks.
v1->v2:
- Fix ppc implementation bug. Should zero high bits explicitly.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
"arsh32 on imm" and "arsh32 on reg" now are accepted. Also added two new
testcases to make sure arsh32 won't be treated as arsh64 during
interpretation or JIT code-gen for which case the high bits will be moved
into low halve that the testcases could catch them.
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch remove the rejection on BPF_ALU | BPF_ARSH as we have supported
them on interpreter and all JIT back-ends
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch implements interpreting BPF_ALU | BPF_ARSH. Do arithmetic right
shift on low 32-bit sub-register, and zero the high 32 bits.
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
BPF_X support needs indirect shift mode, please see code comments for
details.
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Jitting of BPF_K is supported already, but not BPF_X. This patch complete
the support for the latter on both MIPS and microMIPS.
Cc: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Acked-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
For micro-mips, srlv inside POOL32A encoding space should use 0x50
sub-opcode, NOT 0x90.
Some early version ISA doc describes the encoding as 0x90 for both srlv and
srav, this looks to me was a typo. I checked Binutils libopcode
implementation which is using 0x50 for srlv and 0x90 for srav.
v1->v2:
- Keep mm_srlv32_op sorted by value.
Fixes: f31318fdf3 ("MIPS: uasm: Add srlv uasm instruction")
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull crypto fixes from Herbert Xu:
- Disable the new crypto stats interface as it's still being changed
- Fix potential uses-after-free in cbc/cfb/pcbc.
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: user - Disable statistics interface
crypto: do not free algorithm before using
Ido Schimmel says:
====================
mlxsw: Un/offload FDB on NVE detach/attach
Petr says:
When a VXLAN device is attached to a bridge of a driver capable of
offloading such, or upped, the FDB entries already present at the device
need to be offloaded. Similarly when an offloaded VXLAN device ceases
being interesting (it is downed, or detached, or a front-panel port
netdevice is detached from the bridge that the VXLAN device is attached
to), any offloaded FDB entries need to be unoffloaded and unmarked. This
attach / detach processing is implemented in this patchset.
In patch #1, a code pattern is extracted into a named function for
easier reuse.
In patch #2, vxlan_fdb_replay() is added to send
SWITCHDEV_VXLAN_FDB_ADD_TO_DEVICE for each FDB entry with a given VNI.
The intention is that the offloading driver will interpret these events
like any other and thus offload the FDB entries that existed prior to
VXLAN attach.
In patches #3 and #4, the functions vxlan_fdb_clear_offload() resp.
br_fdb_clear_offload() are added. These clear the offloaded flag at
matching FDB entries.
In patches #5-#9, we introduce FID-type-specific and NVE-type-specific
ops necessary to properly abstract invocations of the replay/clear
functions.
Finally patch #10 implements the FDB management.
In patch #11, the mlxsw-specific test case is extended to check that the
management of offload marks under the newly-supported situations is
correct. Patch #12, from Ido, exercises the new code paths in actual
functional test.
v2:
- Patch #1:
- Modify vxlan_fdb_switchdev_notifier_info() to initialize the
structure through a passed-in pointer argument, instead of returning
it as a value.
- Patch #2:
- Adapt to API change in vxlan_fdb_switchdev_notifier_info()
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When using VLAN-aware bridges with VXLAN, the VLAN that is mapped to the
VNI of the VXLAN device is that which is configured as "pvid untagged"
on the corresponding bridge port.
When these flags are toggled or when the VLAN is deleted entirely,
remote hosts should not be able to receive packets from the VTEP.
Add a test case for above mentioned scenarios.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a VXLAN device is attached to an offloaded bridge, or when a
front-panel port is attached to a bridge that already has a VXLAN
device, mlxsw should offload the existing offloadable FDB entries.
Similarly when VXLAN device is downed, the FDB entries are unoffloaded,
and the marks thus need to be cleared. Similarly when a front-panel port
device is attached to a bridge with a VXLAN device, or when VLAN flags
are tweaked on a VXLAN port attached to a VLAN-aware bridge.
Test that the replaying / clearing logic works by observing transitions
in presence of offload marks under different scenarios.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Any existing NVE FDB entries need to be offloaded when NVE is enabled
for a given FID. Recent patches have added fdb_replay op for this, so
just invoke it from mlxsw_sp_nve_fid_enable().
When NVE is disabled on a FID, any existing FDB offloaded marks need to
be cleared on NVE device as well as on its bridge master. An op to
handle this, fdb_clear_offload, has been added to FID ops and NVE ops in
previous patches. Add code to resolve the NVE device, NVE type, and
dispatch to both fdb_clear_offload ops.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If there are any offloaded FDB entries at bridge master of an NVE device
at the time that it's un-offloaded, their offloaded marks need to be
cleared. How that is done depends on whether the bridge in question is
vlan aware. Therefore add a per-FID-type operation.
Implement the operation for the 802.1q and 802.1d bridges.
Add and publish a function mlxsw_sp_fid_fdb_clear_offload() to dispatch
to the new operation according to FID type.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If there are any offloaded FDB entries at an NVE device at the time that
it's un-offloaded, their offloaded marks need to be cleared. How that is
done depends on NVE device type, and therefore add a per-NVE-type
operation.
Implement the operation for the sole NVE device type currently supported
by mlxsw, VXLAN.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A replay of FDB needs to be performed so that the FDB entries existing
at the NVE device are offloaded. How the replay is done depends on NVE
device type, and therefore add a per-NVE-type operation.
Implement the operation for the sole NVE device type currently supported
by mlxsw, VXLAN.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The notifier block will need to be passed to vxlan_fdb_replay() in a
follow-up patch.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A follow-up patch will add support for replay and for clearing of
offload marks. These are NVE type-sensitive operations, and to be able
to dispatch them properly, a FID needs to know what NVE type is attached
to it.
Therefore, track the NVE type at struct mlxsw_sp_fid. Extend
mlxsw_sp_fid_vni_set() to take it as an argument, and add
mlxsw_sp_fid_nve_type().
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a driver unoffloads all FDB entries en bloc, it's inefficient to
send the switchdev notification one by one. Add a helper that unsets the
offload flag on FDB entries on a given bridge port and VLAN.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a driver unoffloads all FDB entries en bloc, it's inefficient to
send the switchdev notification one by one. Add a helper that walks the
FDB table, unsetting the offload flag on RDST with a given VNI.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a VXLAN device becomes relevant to a driver (such as when it is
attached to an offloaded bridge), the driver will generally need to walk
the existing FDB entries and offload them.
Add a function vxlan_fdb_replay() to call a given notifier block for
each FDB entry with a given VNI.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are currently two places that need to initialize the notifier info
structure, and one more is coming next when vxlan_fdb_replay() is
introduced. These three instances have / will have very similar code
that is easy to abstract away into a named function.
Add such function, vxlan_fdb_switchdev_notifier_info(), and call it from
vxlan_fdb_switchdev_call_notifiers() and vxlan_fdb_find_uc().
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=h1rz
-----END PGP SIGNATURE-----
Merge tag 'pci-v4.20-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
"Revert ASPM change that caused a regression"
* tag 'pci-v4.20-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
Revert "PCI/ASPM: Do not initialize link state when aspm_disabled is set"
Igor Russkikh says:
====================
net: aquantia: add RSS configuration
In this patchset few bugs related to RSS are fixed and RSS table and
hash key configuration is added.
We also do increase max number of HW rings upto 8.
v2: removed extra arg check
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support of configuration of RSS hash key and RSS indirection table.
Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now RSS indirection table is initialized before setting up the number of
hw queues, consequently the table may be filled by non existing queues.
This patch moves the initialization when the number of hw queues is
known.
Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Increase the upper limit of the hw queues up to 8.
This makes RSS better on multiheaded cpus.
This is a maximum AQC hardware supports in one traffic class.
The actual value is still limited by a number of available cpu cores.
Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Set RSS indirection table and RSS hash key sizes to their real size.
Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In 'seg6_output', stack variable 'struct flowi6 fl6' was missing
initialization.
Fixes: 6c8702c60b ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels")
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=irzk
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20181207' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Let's try this again...
We're finally happy with the DM livelock issue, and it's also passed
overnight testing and the corruption regression test. The end result
is much nicer now too, which is great.
Outside of that fix, there's a pull request for NVMe with two small
fixes, and a regression fix for BFQ from this merge window. The BFQ
fix looks bigger than it is, it's 90% comment updates"
* tag 'for-linus-20181207' of git://git.kernel.dk/linux-block:
blk-mq: punt failed direct issue to dispatch list
nvmet-rdma: fix response use after free
nvme: validate controller state before rescheduling keep alive
block, bfq: fix decrement of num_active_groups
Pull i2c fixes from Wolfram Sang:
"A set of driver bugfixes for the I2C subsystem"
* 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: uniphier-f: fix violation of tLOW requirement for Fast-mode
i2c: uniphier: fix violation of tLOW requirement for Fast-mode
i2c: uniphier-f: fill TX-FIFO only in IRQ handler for repeated START
i2c: uniphier-f: fix timeout error after reading 8 bytes
i2c: scmi: Fix probe error on devices with an empty SMB0001 ACPI device node
i2c: axxia: properly handle master timeout
i2c: rcar: check bus state before reinitializing
i2c: nvidia-gpu: limit reads also for combined messages
i2c: nvidia-gpu: adhere to I2C fault codes
dmaengine fixes for v4.20-rc6
- Fixing imx-sdma handling of channel terminations, this involves
reverting two commits and implement async termination
- Fix cppi dma channel deletion from pending list on stop
- Fix FIFO size for dw controller in Intel Merrifield
-----BEGIN PGP SIGNATURE-----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=qeTx
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-fix-4.20-rc6' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fixes from Vinod Koul:
"Another pull request for dmaengine. We got bunch of fixes early this
week and all are tagged to stable. Hope this is last fix for this
cycle:
- Fix imx-sdma handling of channel terminations, this involves
reverting two commits and implement async termination
- Fix cppi dma channel deletion from pending list on stop
- Fix FIFO size for dw controller in Intel Merrifield"
* tag 'dmaengine-fix-4.20-rc6' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: dw: Fix FIFO size for Intel Merrifield
dmaengine: cppi41: delete channel from pending list when stop channel
dmaengine: imx-sdma: use GFP_NOWAIT for dma descriptor allocations
dmaengine: imx-sdma: implement channel termination via worker
Revert "dmaengine: imx-sdma: alloclate bd memory from dma pool"
Revert "dmaengine: imx-sdma: Use GFP_NOWAIT for dma allocations"
GNU linker's -z common-page-size's default value is based on the target
architecture. arch/x86/entry/vdso/Makefile sets it to the architecture
default, which is implicit and redundant. Drop it.
Fixes: 2aae950b21 ("x86_64: Add vDSO for x86-64 with gettimeofday/clock_gettime/getcpu")
Reported-by: Dmitry Golovin <dima@golovin.in>
Reported-by: Bill Wendling <morbo@google.com>
Suggested-by: Dmitry Golovin <dima@golovin.in>
Suggested-by: Rui Ueyama <ruiu@google.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Fangrui Song <maskray@google.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20181206191231.192355-1-ndesaulniers@google.com
Link: https://bugs.llvm.org/show_bug.cgi?id=38774
Link: https://github.com/ClangBuiltLinux/linux/issues/31
Since commit 3b8c9f1cdf ("arm64: IPI each CPU after invalidating the
I-cache for kernel mappings"), a call to flush_icache_range() will use
an IPI to cross-call other online CPUs so that any stale instructions
are flushed from their pipelines. This triggers a WARN during the
hibernation resume path, where flush_icache_range() is called with
interrupts disabled and is therefore prone to deadlock:
| Disabling non-boot CPUs ...
| CPU1: shutdown
| psci: CPU1 killed.
| CPU2: shutdown
| psci: CPU2 killed.
| CPU3: shutdown
| psci: CPU3 killed.
| WARNING: CPU: 0 PID: 1 at ../kernel/smp.c:416 smp_call_function_many+0xd4/0x350
| Modules linked in:
| CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.20.0-rc4 #1
Since all secondary CPUs have been taken offline prior to invalidating
the I-cache, there's actually no need for an IPI and we can simply call
__flush_icache_range() instead.
Cc: <stable@vger.kernel.org>
Fixes: 3b8c9f1cdf ("arm64: IPI each CPU after invalidating the I-cache for kernel mappings")
Reported-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Tested-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Tested-by: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Pull NVMe fixes from Christoph.
* 'nvme-4.20' of git://git.infradead.org/nvme:
nvmet-rdma: fix response use after free
nvme: validate controller state before rescheduling keep alive
After the direct dispatch corruption fix, we permanently disallow direct
dispatch of non read/write requests. This works fine off the normal IO
path, as they will be retried like any other failed direct dispatch
request. But for the blk_insert_cloned_request() that only DM uses to
bypass the bottom level scheduler, we always first attempt direct
dispatch. For some types of requests, that's now a permanent failure,
and no amount of retrying will make that succeed. This results in a
livelock.
Instead of making special cases for what we can direct issue, and now
having to deal with DM solving the livelock while still retaining a BUSY
condition feedback loop, always just add a request that has been through
->queue_rq() to the hardware queue dispatch list. These are safe to use
as no merging can take place there. Additionally, if requests do have
prepped data from drivers, we aren't dependent on them not sharing space
in the request structure to safely add them to the IO scheduler lists.
This basically reverts ffe81d4532 and is based on a patch from Ming,
but with the list insert case covered as well.
Fixes: ffe81d4532 ("blk-mq: fix corruption with direct issue")
Cc: stable@vger.kernel.org
Suggested-by: Ming Lei <ming.lei@redhat.com>
Reported-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Ming Lei <ming.lei@redhat.com>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
nvmet_rdma_release_rsp() may free the response before using it at error
flow.
Fixes: 8407879 ("nvmet-rdma: fix possible bogus dereference under heavy load")
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Delete operations are seeing NULL pointer references in call_timer_fn.
Tracking these back, the timer appears to be the keep alive timer.
nvme_keep_alive_work() which is tied to the timer that is cancelled
by nvme_stop_keep_alive(), simply starts the keep alive io but doesn't
wait for it's completion. So nvme_stop_keep_alive() only stops a timer
when it's pending. When a keep alive is in flight, there is no timer
running and the nvme_stop_keep_alive() will have no affect on the keep
alive io. Thus, if the io completes successfully, the keep alive timer
will be rescheduled. In the failure case, delete is called, the
controller state is changed, the nvme_stop_keep_alive() is called while
the io is outstanding, and the delete path continues on. The keep
alive happens to successfully complete before the delete paths mark it
as aborted as part of the queue termination, so the timer is restarted.
The delete paths then tear down the controller, and later on the timer
code fires and the timer entry is now corrupt.
Fix by validating the controller state before rescheduling the keep
alive. Testing with the fix has confirmed the condition above was hit.
Signed-off-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Since commit '2d29c9f89fcd ("block, bfq: improve asymmetric scenarios
detection")', if there are process groups with I/O requests waiting for
completion, then BFQ tags the scenario as 'asymmetric'. This detection
is needed for preserving service guarantees (for details, see comments
on the computation * of the variable asymmetric_scenario in the
function bfq_better_to_idle).
Unfortunately, commit '2d29c9f89fcd ("block, bfq: improve asymmetric
scenarios detection")' contains an error exactly in the updating of
the number of groups with I/O requests waiting for completion: if a
group has more than one descendant process, then the above number of
groups, which is renamed from num_active_groups to a more appropriate
num_groups_with_pending_reqs by this commit, may happen to be wrongly
decremented multiple times, namely every time one of the descendant
processes gets all its pending I/O requests completed.
A correct, complete solution should work as follows. Consider a group
that is inactive, i.e., that has no descendant process with pending
I/O inside BFQ queues. Then suppose that num_groups_with_pending_reqs
is still accounting for this group, because the group still has some
descendant process with some I/O request still in
flight. num_groups_with_pending_reqs should be decremented when the
in-flight request of the last descendant process is finally completed
(assuming that nothing else has changed for the group in the meantime,
in terms of composition of the group and active/inactive state of
child groups and processes). To accomplish this, an additional
pending-request counter must be added to entities, and must be
updated correctly.
To avoid this additional field and operations, this commit resorts to
the following tradeoff between simplicity and accuracy: for an
inactive group that is still counted in num_groups_with_pending_reqs,
this commit decrements num_groups_with_pending_reqs when the first
descendant process of the group remains with no request waiting for
completion.
This simplified scheme provides a fix to the unbalanced decrements
introduced by 2d29c9f89f. Since this error was also caused by lack
of comments on this non-trivial issue, this commit also adds related
comments.
Fixes: 2d29c9f89f ("block, bfq: improve asymmetric scenarios detection")
Reported-by: Steven Barrett <steven@liquorix.net>
Tested-by: Steven Barrett <steven@liquorix.net>
Tested-by: Lucjan Lucjanov <lucjan.lucjanov@gmail.com>
Reviewed-by: Federico Motta <federico@willer.it>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Here's a fix for a broken activation retry loop in the sirf driver.
Included are also two MAINTAINERS updates.
All have been in linux-next with no reported issues.
Signed-off-by: Johan Hovold <johan@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCXAptswAKCRALxc3C7H1l
CPSwAQChmb2y7CwP5il1PxqTa98F9hRx4H3DBCyPvS4WT5U1MgEAlrx1fnuAPiS3
97Q6+ZRCyy5rbyjPpzJ6NwTyt13c4w0=
=oN0i
-----END PGP SIGNATURE-----
Merge tag 'gnss-4.20-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/gnss into char-misc-linus
Johan writes:
GNSS fixes for 4.20-rc6
Here's a fix for a broken activation retry loop in the sirf driver.
Included are also two MAINTAINERS updates.
All have been in linux-next with no reported issues.
Signed-off-by: Johan Hovold <johan@kernel.org>
* tag 'gnss-4.20-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/gnss:
MAINTAINERS: exclude gnss from SIRFPRIMA2 regex matching
MAINTAINERS: add gnss scm tree
gnss: sirf: fix activation retry handling
EBUSY is not handled by VFS, and will be passed to user-mode. This is not
correct as we need to wait for more credits.
This patch also fixes a bug where rsize or wsize is used uninitialized when
the call to server->ops->wait_mtu_credits() fails.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Packet based credit mode bit determines whether the credit mode
is done per message or packet. Expose the QP creation flag and
the HCA capability.
Signed-off-by: Danit Goldberg <danitg@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Since this user-space API is still undergoing significant changes,
this patch disables it for the current merge window.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Shiju Jose
Linus Torvalds
Alexei Starovoitov
Jiong Wang
David S. Miller
Ido Schimmel
Petr Machata
Dmitry Bogdanov
Shmulik Ladkani
Nick Desaulniers
Will Deacon
Jens Axboe
Israel Rukshin
James Smart
Paolo Valente
Greg Kroah-Hartman
Long Li
Danit Goldberg
Herbert Xu