At least in the v4.0 case openowners can hang around for a while after
last close, but they shouldn't really block (for example), a new mount
with a different principal.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In bakeathon testing Solaris client was getting CLID_INUSE error when
doing a krb5 mount soon after an auth_sys mount, or vice versa.
That's not really necessary since in this case the old client doesn't
have any state any more:
http://tools.ietf.org/html/rfc7530#page-103
"when the server gets a SETCLIENTID for a client ID that
currently has no state, or it has state but the lease has
expired, rather than returning NFS4ERR_CLID_INUSE, the server
MUST allow the SETCLIENTID and confirm the new client ID if
followed by the appropriate SETCLIENTID_CONFIRM."
This doesn't fix the problem completely since our client_has_state()
check counts openowners left around to handle close replays, which we
should probably just remove in this case.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Any file which includes trace.h will need to include state.h, even if
they aren't using any state tracepoints. Ensure that we include any
headers that might be needed in trace.h instead of relying on the
*.c files to have the right ones.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This moves the hole in the struct down below the flags fields, which
allows us to potentially add a new flag without growing the struct.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Remove unneeded NULL test.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@ expression x; @@
-if (x != NULL) {
\(kmem_cache_destroy\|mempool_destroy\|dma_pool_destroy\)(x);
x = NULL;
-}
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Andrew was seeing a race occur when an OPEN and OPEN_DOWNGRADE were
running in parallel. The server would receive the OPEN_DOWNGRADE first
and check its seqid, but then an OPEN would race in and bump it. The
OPEN_DOWNGRADE would then complete and bump the seqid again. The result
was that the OPEN_DOWNGRADE would be applied after the OPEN, even though
it should have been rejected since the seqid changed.
The only recourse we have here I think is to serialize operations that
bump the seqid in a stateid, particularly when we're given a seqid in
the call. To address this, we add a new rw_semaphore to the
nfs4_ol_stateid struct. We do a down_write prior to checking the seqid
after looking up the stateid to ensure that nothing else is going to
bump it while we're operating on it.
In the case of OPEN, we do a down_read, as the call doesn't contain a
seqid. Those can run in parallel -- we just need to serialize them when
there is a concurrent OPEN_DOWNGRADE or CLOSE.
LOCK and LOCKU however always take the write lock as there is no
opportunity for parallelizing those.
Reported-and-Tested-by: Andrew W Elble <aweits@rit.edu>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Recent Linux clients have started to send GETLAYOUT requests with
minlength less than blocksize.
Servers aren't really allowed to impose this kind of restriction on
layouts; see RFC 5661 section 18.43.3 for details.
This has been observed to cause indefinite hangs on fsx runs on some
clients.
Cc: stable@vger.kernel.org
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Highlights include:
Stable patches:
- Fix atomicity of pNFS commit list updates
- Fix NFSv4 handling of open(O_CREAT|O_EXCL|O_RDONLY)
- nfs_set_pgio_error sometimes misses errors
- Fix a thinko in xs_connect()
- Fix borkage in _same_data_server_addrs_locked()
- Fix a NULL pointer dereference of migration recovery ops for v4.2 client
- Don't let the ctime override attribute barriers.
- Revert "NFSv4: Remove incorrect check in can_open_delegated()"
- Ensure flexfiles pNFS driver updates the inode after write finishes
- flexfiles must not pollute the attribute cache with attrbutes from the DS
- Fix a protocol error in layoutreturn
- Fix a protocol issue with NFSv4.1 CLOSE stateids
Bugfixes + cleanups
- pNFS blocks bugfixes from Christoph
- Various cleanups from Anna
- More fixes for delegation corner cases
- Don't fsync twice for O_SYNC/IS_SYNC files
- Fix pNFS and flexfiles layoutstats bugs
- pnfs/flexfiles: avoid duplicate tracking of mirror data
- pnfs: Fix layoutget/layoutreturn/return-on-close serialisation issues.
- pnfs/flexfiles: error handling retries a layoutget before fallback to MDS
Features:
- Full support for the OPEN NFS4_CREATE_EXCLUSIVE4_1 mode from Kinglong
- More RDMA client transport improvements from Chuck
- Removal of the deprecated ib_reg_phys_mr() and ib_rereg_phys_mr() verbs
from the SUNRPC, Lustre and core infiniband tree.
- Optimise away the close-to-open getattr if there is no cached data
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJV7chgAAoJEGcL54qWCgDyqJQP/3kto9VXnXcatC382jF9Pfj5
F55XeSnviOXH7CyiKA4nSBhnxg/sLuWOTpbkVI/4Y+VyWhLby9h+mtcKURHOlBnj
d5BFoPwaBVDnUiKlHFQDkRjIyxjj2Sb6/uEb2V/u3v+3znR5AZZ4lzFx4cD85oaz
mcru7yGiSxaQCIH6lHExcCEKXaDP5YdvS9YFsyQfv2976JSaQHM9ZG04E0v6MzTo
E5wwC4CLMKmhuX9kmQMj85jzs1ASAKZ3N7b4cApTIo6F8DCDH0vKQphq/nEQC497
ECjEs5/fpxtNJUpSBu0gT7G4LCiW3PzE7pHa+8bhbaAn9OzxIR5+qWujKsfGYQhO
Oomp3K9zO6omshAc5w4MkknPpbImjoZjGAj/q/6DbtrDpnD7DzOTirwYY2yX0CA8
qcL81uJUb8+j4jJj4RTO+lTUBItrM1XTqTSd/3eSMr5DDRVZj+ERZxh17TaxRBZL
YrbrLHxCHrcbdSbPlovyvY+BwjJUUFJRcOxGQXLmNYR9u92fF59rb53bzVyzcRRO
wBozzrNRCFL+fPgfNPLEapIb6VtExdM3rl2HYsJGckHj4DPQdnoB3ytIT9iEFZEN
+/rE14XEZte7kuH3OP4el2UsP/hVsm7A49mtwrkdbd7rxMWD6XfQUp8DAggWUEtI
1H6T7RC1Y6wsu0X1fnVz
=knJA
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.3-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Highlights include:
Stable patches:
- Fix atomicity of pNFS commit list updates
- Fix NFSv4 handling of open(O_CREAT|O_EXCL|O_RDONLY)
- nfs_set_pgio_error sometimes misses errors
- Fix a thinko in xs_connect()
- Fix borkage in _same_data_server_addrs_locked()
- Fix a NULL pointer dereference of migration recovery ops for v4.2
client
- Don't let the ctime override attribute barriers.
- Revert "NFSv4: Remove incorrect check in can_open_delegated()"
- Ensure flexfiles pNFS driver updates the inode after write finishes
- flexfiles must not pollute the attribute cache with attrbutes from
the DS
- Fix a protocol error in layoutreturn
- Fix a protocol issue with NFSv4.1 CLOSE stateids
Bugfixes + cleanups
- pNFS blocks bugfixes from Christoph
- Various cleanups from Anna
- More fixes for delegation corner cases
- Don't fsync twice for O_SYNC/IS_SYNC files
- Fix pNFS and flexfiles layoutstats bugs
- pnfs/flexfiles: avoid duplicate tracking of mirror data
- pnfs: Fix layoutget/layoutreturn/return-on-close serialisation
issues
- pnfs/flexfiles: error handling retries a layoutget before fallback
to MDS
Features:
- Full support for the OPEN NFS4_CREATE_EXCLUSIVE4_1 mode from
Kinglong
- More RDMA client transport improvements from Chuck
- Removal of the deprecated ib_reg_phys_mr() and ib_rereg_phys_mr()
verbs from the SUNRPC, Lustre and core infiniband tree.
- Optimise away the close-to-open getattr if there is no cached data"
* tag 'nfs-for-4.3-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (108 commits)
NFSv4: Respect the server imposed limit on how many changes we may cache
NFSv4: Express delegation limit in units of pages
Revert "NFS: Make close(2) asynchronous when closing NFS O_DIRECT files"
NFS: Optimise away the close-to-open getattr if there is no cached data
NFSv4.1/flexfiles: Clean up ff_layout_write_done_cb/ff_layout_commit_done_cb
NFSv4.1/flexfiles: Mark the layout for return in ff_layout_io_track_ds_error()
nfs: Remove unneeded checking of the return value from scnprintf
nfs: Fix truncated client owner id without proto type
NFSv4.1/flexfiles: Mark layout for return if the mirrors are invalid
NFSv4.1/flexfiles: RW layouts are valid only if all mirrors are valid
NFSv4.1/flexfiles: Fix incorrect usage of pnfs_generic_mark_devid_invalid()
NFSv4.1/flexfiles: Fix freeing of mirrors
NFSv4.1/pNFS: Don't request a minimal read layout beyond the end of file
NFSv4.1/pnfs: Handle LAYOUTGET return values correctly
NFSv4.1/pnfs: Don't ask for a read layout for an empty file.
NFSv4.1: Fix a protocol issue with CLOSE stateids
NFSv4.1/flexfiles: Don't mark the entire deviceid as bad for file errors
SUNRPC: Prevent SYN+SYNACK+RST storms
SUNRPC: xs_reset_transport must mark the connection as disconnected
NFSv4.1/pnfs: Ensure layoutreturn reserves space for the opaque payload
...
We have observed the server sending recalls for delegation stateids
that have already been successfully returned. Change
nfsd4_cb_recall_done() to return success if the client has returned
the delegation. While this does not completely eliminate the sending
of recalls for delegations that have already been returned, this
does prevent unnecessarily declaring the callback path to be down.
Reported-by: Eric Meddaugh <etmsys@rit.edu>
Signed-off-by: Andrew Elble <aweits@rit.edu>
Acked-by: Jeff Layton <jlayton@poochiereds.net>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Somebody with a Solaris client was hitting this case. We haven't
figured out why yet, and don't have a reproducer. Meanwhile Frank
noticed that RFC 7530 actually recommends CLID_INUSE for this case.
Unlikely to help the original reporter, but may as well fix it.
Reported-by: Frank Filz <ffilzlnx@mindspring.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
It's possible that a DELEGRETURN could race with (e.g.) client expiry,
in which case we could end up putting the delegation hash reference more
than once.
Have unhash_delegation_locked return a bool that indicates whether it
was already unhashed. In the case of destroy_delegation we only
conditionally put the hash reference if that returns true.
The other callers of unhash_delegation_locked call it while walking
list_heads that shouldn't yet be detached. If we find that it doesn't
return true in those cases, then throw a WARN_ON as that indicates that
we have a partially hashed delegation, and that something is likely very
wrong.
Tested-by: Andrew W Elble <aweits@rit.edu>
Tested-by: Anna Schumaker <Anna.Schumaker@netapp.com>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
When an open or lock stateid is hashed, we take an extra reference to
it. When we unhash it, we drop that reference. The code however does
not properly account for the case where we have two callers concurrently
trying to unhash the stateid. This can lead to list corruption and the
hash reference being put more than once.
Fix this by having unhash_ol_stateid use list_del_init on the st_perfile
list_head, and then testing to see if that list_head is empty before
releasing the hash reference. This means that some of the unhashing
wrappers now become bool return functions so we can test to see whether
the stateid was unhashed before we put the reference.
Reported-by: Andrew W Elble <aweits@rit.edu>
Tested-by: Andrew W Elble <aweits@rit.edu>
Reported-by: Anna Schumaker <Anna.Schumaker@netapp.com>
Tested-by: Anna Schumaker <Anna.Schumaker@netapp.com>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We can potentially have several nfs4_laundromat jobs running if there
are multiple namespaces running nfsd on the box. Those are effectively
separated from one another though, so I don't see any reason to
serialize them.
Also, create_singlethread_workqueue automatically adds the
WQ_MEM_RECLAIM flag. Since we run this job on a timer, it's not really
involved in any reclaim paths. I see no need for a rescuer thread.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
These messages, combined with the backtrace they trigger, makes it seem
like a serious problem, though a quick search shows distros marking
it as a "won't fix" non-issue when the problem is reported by users.
The backtrace is overkill, and only really manages to show that if
you follow the code path, you can't really avoid it with bootargs
or configuration settings in the container.
Given that, lets tone it down a bit and get rid of the WARN severity,
and the associated backtrace, so people aren't needlessly alarmed.
Also, lets drop the split printk line, since they are grep unfriendly.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Security label can be set in OPEN/CREATE request, nfsd should set
the bitmask in word2 if setting success.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
According to rfc5661 18.16.4,
"If EXCLUSIVE4_1 was used, the client determines the attributes
used for the verifier by comparing attrset with cva_attrs.attrmask;"
So, EXCLUSIVE4_1 also needs those bitmask used to store the verifier.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The encode order should be as the bitmask defined order.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently we'll respond correctly to a request for either
FS_LAYOUT_TYPES or LAYOUT_TYPES, but not to a request for both
attributes simultaneously.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
After commit ae7095a7c4 (nfsd4: helper function for getting mounted_on
ino) we ignore the return value from get_parent_attributes().
Also, the following FATTR4_WORD2_LAYOUT_BLKSIZE uses stat.blksize, so to
avoid overwriting that, use an independent value for the parent's
attributes.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
NLM locks don't conflict with NFSv4 share reservations, so we're not
going to learn anything new by watiting for them.
They do conflict with NFSv4 locks and with delegations.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
export.h refers to the pnfs_layouttype enum, which is defined there.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Nfsd has implement a site of seq_operations functions as sunrpc's cache.
Just exports sunrpc's codes, and remove nfsd's redundant codes.
v8, same as v6
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
According to Christoph's advice, this patch introduce a new helper
nfsd4_cb_sequence_done() for processing more callback errors, following
the example of the client's nfs41_sequence_done().
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Commit 294ac32e99 "nfsd: protect clid and verifier generation with
client_lock" moved gen_confirm() to gen_clid().
After that commit, setclientid will return a bad reply with all-zero
verifier after copy_clid().
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If using clientid_counter, it seems possible that gen_confirm could
generate the same verifier for the same client in some situations.
Add a new counter for client confirm verifier to make sure gen_confirm
generates a different verifier on each call for the same clientid.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Reviewed-by: Jeff Layton <jlayton@poochiereds.net>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
v2, new helper nfs4_free_stateowner for freeing so_owner.data and sop
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Layout is a state resource, nfsd should check it too.
v2, drop unneeded updating in nfsd4_renew()
v3, fix compile error without CONFIG_NFSD_PNFS
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Add an operation that will do setup of the service. In the case of a
classic thread-based service that means starting up threads. In the case
of a workqueue-based service, the setup will do something different.
Signed-off-by: Shirley Ma <shirley.ma@oracle.com>
Acked-by: Jeff Layton <jlayton@primarydata.com>
Tested-by: Shirley Ma <shirliey.ma@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
For now, all services use svc_xprt_do_enqueue, but once we add
workqueue-based service support, we'll need to do something different.
Signed-off-by: Shirley Ma <shirley.ma@oracle.com>
Acked-by: Jeff Layton <jlayton@primarydata.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
...not technically an operation, but it's more convenient and cleaner
to pass the module pointer in this struct.
Signed-off-by: Shirley Ma <shirley.ma@oracle.com>
Acked-by: Jeff Layton <jlayton@primarydata.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Since we now have a container for holding svc_serv operations, move the
sv_function into it as well.
Signed-off-by: Shirley Ma <shirley.ma@oracle.com>
Acked-by: Jeff Layton <jlayton@primarydata.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In later patches we'll need to abstract out more operations on a
per-service level, besides sv_shutdown and sv_function.
Declare a new svc_serv_ops struct to hold these operations, and move
sv_shutdown into this struct.
Signed-off-by: Shirley Ma <shirley.ma@oracle.com>
Acked-by: Jeff Layton <jlayton@primarydata.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently, preprocess_stateid_op calls nfs4_check_olstateid which
verifies that the open stateid corresponds to the current filehandle in the
call by calling nfs4_check_fh.
If the stateid is a NFS4_DELEG_STID however, then no such check is done.
This could cause incorrect enforcement of permissions, because the
nfsd_permission() call in nfs4_check_file uses current the current
filehandle, but any subsequent IO operation will use the file descriptor
in the stateid.
Move the call to nfs4_check_fh into nfs4_check_file instead so that it
can be done for all stateid types.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Cc: stable@vger.kernel.org
[bfields: moved fh check to avoid NULL deref in special stateid case]
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
After proc_layoutcommit success, i_size_read(inode) always >= new_size.
Just set lc_size_chg before proc_layoutcommit, if proc_layoutcommit
failed, nfsd will skip the lc_size_chg, so it's no harm.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If lookup_one_len() failed, nfsd should free those memory allocated for fname.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If nfsd4_layout_setlease fails, nfsd will not put ls->ls_file.
Fix commit c5c707f96f "nfsd: implement pNFS layout recalls".
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Remove the hack where we fput the read-specific file in generic code.
Instead we can do it in nfsd4_encode_read as that gets called for all
error cases as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This patch changes nfs4_preprocess_stateid_op so it always returns
a valid struct file if it has been asked for that. For that we
now allocate a temporary struct file for special stateids, and check
permissions if we got the file structure from the stateid. This
ensures that all callers will get their handling of special stateids
right, and avoids code duplication.
There is a little wart in here because the read code needs to know
if we allocated a file structure so that it can copy around the
read-ahead parameters. In the long run we should probably aim to
cache full file structures used with special stateids instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Split out two self contained helpers to make the function more readable.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Refactor the raparam hash helpers to just deal with the raparms,
and keep opening/closing files separate from that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Use kernel.h macro definition.
Thanks to Julia Lawall for Coccinelle scripting support.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
When testing pnfs layout, nfsd got error NFS4ERR_SEQ_MISORDERED.
It is caused by nfs return NFS4ERR_DELAY before validate_seqid(),
don't update the sequnce id, but nfsd updates the sequnce id !!!
According to RFC5661 20.9.3,
" If CB_SEQUENCE returns an error, then the state of the slot
(sequence ID, cached reply) MUST NOT change. "
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
nfsd enters a infinite loop and prints message every 10 seconds:
May 31 18:33:52 test-server kernel: Error sending entire callback!
May 31 18:34:01 test-server kernel: Error sending entire callback!
This is caused by a cb_layoutreturn getting error -10008
(NFS4ERR_DELAY), the client crashing, and then nfsd entering the
infinite loop:
bc_sendto --> call_timeout --> nfsd4_cb_done --> nfsd4_cb_layout_done
with error -10008 --> rpc_delay(task, HZ/100) --> bc_sendto ...
Reproduced using xfstests 074 with nfs client's kdump on,
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT set, and client's blkmapd down:
1. nfs client's write operation will get the layout of file,
and then send getdeviceinfo,
2. but layout segment is not recorded by client because blkmapd is down,
3. client writes data by sending WRITE to server,
4. nfs server recalls the layout of the file before WRITE,
5. network error causes the client reset the session and return NFS4ERR_DELAY,
6. so client's WRITE operation is waiting the reply.
If the task hangs 120s, the client will crash.
7. so that, the next bc_sendto will fail with TIMEOUT,
and cb_status is NFS4ERR_DELAY.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
gcc-5.0 warns about a potential uninitialized variable use in nfsd:
fs/nfsd/nfs4state.c: In function 'nfsd4_process_open2':
fs/nfsd/nfs4state.c:3781:3: warning: 'old_deny_bmap' may be used uninitialized in this function [-Wmaybe-uninitialized]
reset_union_bmap_deny(old_deny_bmap, stp);
^
fs/nfsd/nfs4state.c:3760:16: note: 'old_deny_bmap' was declared here
unsigned char old_deny_bmap;
^
This is a false positive, the code path that is warned about cannot
actually be reached.
This adds an initialization for the variable to make the warning go
away.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Whether or not a file system supports acls can be determined with
IS_POSIXACL(inode) and does not require trying to fetch any acls; the code for
computing the supported_attrs and aclsupport attributes can be simplified.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
NFSv2 can set the atime and/or mtime of a file to specific timestamps but not
to the server's current time. To implement the equivalent of utimes("file",
NULL), it uses a heuristic.
NFSv3 and later do support setting the atime and/or mtime to the server's
current time directly. The NFSv2 heuristic is still enabled, and causes
timestamps to be set wrong sometimes.
Fix this by moving the heuristic into the NFSv2 specific code. We can leave it
out of the create code path: the owner can always set timestamps arbitrarily,
and the workaround would never trigger.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The NFSv3 READDIRPLUS gets some of the returned attributes from the
readdir, and some from an inode returned from a new lookup. The two
objects could be different thanks to intervening renames.
The attributes in READDIRPLUS are optional, so let's just skip them if
we notice this case.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
With sessions in v4.1 or later we don't need to manually probe the backchannel
connection, so we can declare it up instantly after setting up the RPC client.
Note that we really should split nfsd4_run_cb_work in the long run, this is
just the least intrusive fix for now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Checking the rpc_client pointer is not a reliable way to detect
backchannel changes: cl_cb_client is changed only after shutting down
the rpc client, so the condition cl_cb_client = tk_client will always be
true.
Check the RPC_TASK_KILLED flag instead, and rewrite the code to avoid
the buggy cl_callbacks list and fix the lifetime rules due to double
calls of the ->prepare callback operations method for this retry case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We must only increment the sequence id if the client has seen and responded
to a request. If we failed to deliver it to the client we must resend with
the same sequence id. So just like the client track errors at the transport
level differently from those returned in the XDR.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
For the sake of forgetful clients, the server should return the layouts
to the file system on 'last close' of a file (assuming that there are no
delegations outstanding to that particular client) or on delegreturn
(assuming that there are no opens on a file from that particular
client).
In theory the information is all there in current data structures, but
it's not efficiently available; nfs4_file->fi_ref includes references on
the file across all clients, but we need a per-(client, file) count.
Walking through lots of stateid's to calculate this on each close or
delegreturn would be painful.
This patch introduces infrastructure to maintain per-client opens and
delegation counters on a per-file basis.
[hch: ported to the mainline pNFS support, merged various fixes from Jeff]
Signed-off-by: Sachin Bhamare <sachin.bhamare@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If we find a non-confirmed openowner we jump to exit the function, but do
not set an error value. Fix this by factoring out a helper to do the
check and properly set the error from nfsd4_validate_stateid.
Cc: stable@vger.kernel.org
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Commit df52699e4f ("NFSv4.1: Don't cache deviceids that have no
notifications") causes the Linux NFS client to stop caching deviceid's
unless a server pretends to support deviceid notifications. While this
behavior is stupid and the language around this area in rfc5661 is a
mess carified by an errata that I submittted, Trond insists on this
behavior. Not caching deviceids degrades block layout performance
massively as a GETDEVICEINFO is fairly expensive.
So add this hack to make the Linux client happy again.
Cc: stable@vger.kernel.org
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Pull fourth vfs update from Al Viro:
"d_inode() annotations from David Howells (sat in for-next since before
the beginning of merge window) + four assorted fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
RCU pathwalk breakage when running into a symlink overmounting something
fix I_DIO_WAKEUP definition
direct-io: only inc/dec inode->i_dio_count for file systems
fs/9p: fix readdir()
VFS: assorted d_backing_inode() annotations
VFS: fs/inode.c helpers: d_inode() annotations
VFS: fs/cachefiles: d_backing_inode() annotations
VFS: fs library helpers: d_inode() annotations
VFS: assorted weird filesystems: d_inode() annotations
VFS: normal filesystems (and lustre): d_inode() annotations
VFS: security/: d_inode() annotations
VFS: security/: d_backing_inode() annotations
VFS: net/: d_inode() annotations
VFS: net/unix: d_backing_inode() annotations
VFS: kernel/: d_inode() annotations
VFS: audit: d_backing_inode() annotations
VFS: Fix up some ->d_inode accesses in the chelsio driver
VFS: Cachefiles should perform fs modifications on the top layer only
VFS: AF_UNIX sockets should call mknod on the top layer only
Pull nfsd updates from Bruce Fields:
"A quiet cycle this time; this is basically entirely bugfixes.
The few that aren't cc'd to stable are cleanup or seemed unlikely to
affect anyone much"
* 'for-4.1' of git://linux-nfs.org/~bfields/linux:
uapi: Remove kernel internal declaration
nfsd: fix nsfd startup race triggering BUG_ON
nfsd: eliminate NFSD_DEBUG
nfsd4: fix READ permission checking
nfsd4: disallow SEEK with special stateids
nfsd4: disallow ALLOCATE with special stateids
nfsd: add NFSEXP_PNFS to the exflags array
nfsd: Remove duplicate macro define for max sec label length
nfsd: allow setting acls with unenforceable DENYs
nfsd: NFSD_FAULT_INJECTION depends on DEBUG_FS
nfsd: remove unused status arg to nfsd4_cleanup_open_state
nfsd: remove bogus setting of status in nfsd4_process_open2
NFSD: Use correct reply size calculating function
NFSD: Using path_equal() for checking two paths
nfsd triggered a BUG_ON in net_generic(...) when rpc_pipefs_event(...)
in fs/nfsd/nfs4recover.c was called before assigning ntfsd_net_id.
The following was observed on a MIPS 32-core processor:
kernel: Call Trace:
kernel: [<ffffffffc00bc5e4>] rpc_pipefs_event+0x7c/0x158 [nfsd]
kernel: [<ffffffff8017a2a0>] notifier_call_chain+0x70/0xb8
kernel: [<ffffffff8017a4e4>] __blocking_notifier_call_chain+0x4c/0x70
kernel: [<ffffffff8053aff8>] rpc_fill_super+0xf8/0x1a0
kernel: [<ffffffff8022204c>] mount_ns+0xb4/0xf0
kernel: [<ffffffff80222b48>] mount_fs+0x50/0x1f8
kernel: [<ffffffff8023dc00>] vfs_kern_mount+0x58/0xf0
kernel: [<ffffffff802404ac>] do_mount+0x27c/0xa28
kernel: [<ffffffff80240cf0>] SyS_mount+0x98/0xe8
kernel: [<ffffffff80135d24>] handle_sys64+0x44/0x68
kernel:
kernel:
Code: 0040f809 00000000 2e020001 <00020336> 3c12c00d
3c02801a de100000 6442eb98 0040f809
kernel: ---[ end trace 7471374335809536 ]---
Fixed this behaviour by calling register_pernet_subsys(&nfsd_net_ops) before
registering rpc_pipefs_event(...) with the notifier chain.
Signed-off-by: Giuseppe Cantavenera <giuseppe.cantavenera.ext@nokia.com>
Signed-off-by: Lorenzo Restelli <lorenzo.restelli.ext@nokia.com>
Reviewed-by: Kinlong Mee <kinglongmee@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Commit f895b252d4 ("sunrpc: eliminate RPC_DEBUG") introduced
use of IS_ENABLED() in a uapi header which leads to a build
failure for userspace apps trying to use <linux/nfsd/debug.h>:
linux/nfsd/debug.h:18:15: error: missing binary operator before token "("
#if IS_ENABLED(CONFIG_SUNRPC_DEBUG)
^
Since this was only used to define NFSD_DEBUG if CONFIG_SUNRPC_DEBUG
is enabled, replace instances of NFSD_DEBUG with CONFIG_SUNRPC_DEBUG.
Cc: stable@vger.kernel.org
Fixes: f895b252d4 "sunrpc: eliminate RPC_DEBUG"
Signed-off-by: Mark Salter <msalter@redhat.com>
Reviewed-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In the case we already have a struct file (derived from a stateid), we
still need to do permission-checking; otherwise an unauthorized user
could gain access to a file by sniffing or guessing somebody else's
stateid.
Cc: stable@vger.kernel.org
Fixes: dc97618ddd "nfsd4: separate splice and readv cases"
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If the client uses a special stateid then we'll pass a NULL file to
vfs_llseek.
Fixes: 24bab49122 " NFSD: Implement SEEK"
Cc: Anna Schumaker <Anna.Schumaker@Netapp.com>
Cc: stable@vger.kernel.org
Reported-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
vfs_fallocate will hit a NULL dereference if the client tries an
ALLOCATE or DEALLOCATE with a special stateid. Fix that. (We also
depend on the open to have broken any conflicting leases or delegations
for us.)
(If it turns out we need to allow special stateid's then we could do a
temporary open here in the special-stateid case, as we do for read and
write. For now I'm assuming it's not necessary.)
Fixes: 95d871f03c "nfsd: Add ALLOCATE support"
Cc: stable@vger.kernel.org
Cc: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Merge second patchbomb from Andrew Morton:
- the rest of MM
- various misc bits
- add ability to run /sbin/reboot at reboot time
- printk/vsprintf changes
- fiddle with seq_printf() return value
* akpm: (114 commits)
parisc: remove use of seq_printf return value
lru_cache: remove use of seq_printf return value
tracing: remove use of seq_printf return value
cgroup: remove use of seq_printf return value
proc: remove use of seq_printf return value
s390: remove use of seq_printf return value
cris fasttimer: remove use of seq_printf return value
cris: remove use of seq_printf return value
openrisc: remove use of seq_printf return value
ARM: plat-pxa: remove use of seq_printf return value
nios2: cpuinfo: remove use of seq_printf return value
microblaze: mb: remove use of seq_printf return value
ipc: remove use of seq_printf return value
rtc: remove use of seq_printf return value
power: wakeup: remove use of seq_printf return value
x86: mtrr: if: remove use of seq_printf return value
linux/bitmap.h: improve BITMAP_{LAST,FIRST}_WORD_MASK
MAINTAINERS: CREDITS: remove Stefano Brivio from B43
.mailmap: add Ricardo Ribalda
CREDITS: add Ricardo Ribalda Delgado
...
There are a lot of embedded systems that run most or all of their
functionality in init, running as root:root. For these systems,
supporting multiple users is not necessary.
This patch adds a new symbol, CONFIG_MULTIUSER, that makes support for
non-root users, non-root groups, and capabilities optional. It is enabled
under CONFIG_EXPERT menu.
When this symbol is not defined, UID and GID are zero in any possible case
and processes always have all capabilities.
The following syscalls are compiled out: setuid, setregid, setgid,
setreuid, setresuid, getresuid, setresgid, getresgid, setgroups,
getgroups, setfsuid, setfsgid, capget, capset.
Also, groups.c is compiled out completely.
In kernel/capability.c, capable function was moved in order to avoid
adding two ifdef blocks.
This change saves about 25 KB on a defconfig build. The most minimal
kernels have total text sizes in the high hundreds of kB rather than
low MB. (The 25k goes down a bit with allnoconfig, but not that much.
The kernel was booted in Qemu. All the common functionalities work.
Adding users/groups is not possible, failing with -ENOSYS.
Bloat-o-meter output:
add/remove: 7/87 grow/shrink: 19/397 up/down: 1675/-26325 (-24650)
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Iulia Manda <iulia.manda21@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
that's the bulk of filesystem drivers dealing with inodes of their own
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The current prototypes for these operations are somewhat awkward as they
deal with fl_owners but take struct file_lock arguments. In the future,
we'll want to be able to take references without necessarily dealing
with a struct file_lock.
Change them to take fl_owner_t arguments instead and have the callers
deal with assigning the values to the file_lock structs.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
NFS4_MAXLABELLEN has defined for sec label max length, use it directly.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We've been refusing ACLs that DENY permissions that we can't effectively
deny. (For example, we can't deny permission to read attributes.)
Andreas points out that any DENY of Window's "read", "write", or
"modify" permissions would trigger this. That would be annoying.
So maybe we should be a little less paranoid, and ignore entirely the
permissions that are meaningless to us.
Reported-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
NFSD_FAULT_INJECTION depends on DEBUG_FS, otherwise the debugfs_create_*
interface may return unexpected error -ENODEV, and cause system crash.
Signed-off-by: Chengyu Song <csong84@gatech.edu>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
status is always reset after this (and it doesn't make much sense there
anyway).
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
ALLOCATE/DEALLOCATE only reply one status value to client,
so, using nfsd4_only_status_rsize for reply size calculating.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Reviewed-by: Anna Schumaker <Anna.Schumaker@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Turns out sending out layouts to any client is a bad idea if they
can't get at the storage device, so require explicit admin action
to enable pNFS.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
With return layout as, (seg is return layout, lo is record layout)
seg->offset <= lo->offset and layout_end(seg) < layout_end(lo),
nfsd should update lo's offset to seg's end,
and,
seg->offset > lo->offset and layout_end(seg) >= layout_end(lo),
nfsd should update lo's end to seg's offset.
Fixes: 9cf514ccfa ("nfsd: implement pNFS operations")
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
When testing pnfs with nfsd_debug on, nfsd print a negative number
of layout length and foff in nfsd4_block_proc_layoutget as,
"GET: -xxxx:-xxx 2"
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
alloc_init_lock_stateowner can return an already freed entry if there is
a race to put openowners in the hashtable.
Noticed by inspection after Jeff Layton fixed the same bug for open
owners. Depending on client behavior, this one may be trickier to
trigger in practice.
Fixes: c58c6610ec "nfsd: Protect adding/removing lock owners using client_lock"
Cc: <stable@vger.kernel.org>
Cc: Trond Myklebust <trond.myklebust@primarydata.com>
Acked-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
alloc_init_open_stateowner can return an already freed entry if there is
a race to put openowners in the hashtable.
In commit 7ffb588086, we changed it so that we allocate and initialize
an openowner, and then check to see if a matching one got stuffed into
the hashtable in the meantime. If it did, then we free the one we just
allocated and take a reference on the one already there. There is a bug
here though. The code will then return the pointer to the one that was
allocated (and has now been freed).
This wasn't evident before as this race almost never occurred. The Linux
kernel client used to serialize requests for a single openowner. That
has changed now with v4.0 kernels, and this race can now easily occur.
Fixes: 7ffb588086
Cc: <stable@vger.kernel.org> # v3.17+
Cc: Trond Myklebust <trond.myklebust@primarydata.com>
Reported-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Fix commit 9cf514ccfa (nfsd: implement pNFS operations).
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Return status after nfsd4_decode_stateid failed.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
According to RFC5661:
" When lr_returntype is LAYOUTRETURN4_FSID, the current filehandle is used
to identify the file system and all layouts matching the client ID,
the fsid of the file system, lora_layout_type, and lora_iomode are
returned. When lr_returntype is LAYOUTRETURN4_ALL, all layouts
matching the client ID, lora_layout_type, and lora_iomode are
returned and the current filehandle is not used. "
When returning client layouts, always check layout type.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
31ef83dc05 "nfsd: add trace events" had a typo that dropped a trace
event and replaced it by an incorrect recursive call to
nfsd4_cb_layout_fail. 133d558216 "Subject: nfsd: don't recursively
call nfsd4_cb_layout_fail" fixed the crash, this restores the
tracepoint.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Pull nfsd fixes from Bruce Fields:
"Three miscellaneous bugfixes, most importantly the clp->cl_revoked
bug, which we've seen several reports of people hitting"
* 'for-4.0' of git://linux-nfs.org/~bfields/linux:
sunrpc: integer underflow in rsc_parse()
nfsd: fix clp->cl_revoked list deletion causing softlock in nfsd
svcrpc: fix memory leak in gssp_accept_sec_context_upcall
commit 2d4a532d38 ("nfsd: ensure that clp->cl_revoked list is
protected by clp->cl_lock") removed the use of the reaplist to
clean out clp->cl_revoked. It failed to change list_entry() to
walk clp->cl_revoked.next instead of reaplist.next
Fixes: 2d4a532d38 ("nfsd: ensure that clp->cl_revoked list is protected by clp->cl_lock")
Cc: stable@vger.kernel.org
Reported-by: Eric Meddaugh <etmsys@rit.edu>
Tested-by: Eric Meddaugh <etmsys@rit.edu>
Signed-off-by: Andrew Elble <aweits@rit.edu>
Reviewed-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Convert the following where appropriate:
(1) S_ISLNK(dentry->d_inode) to d_is_symlink(dentry).
(2) S_ISREG(dentry->d_inode) to d_is_reg(dentry).
(3) S_ISDIR(dentry->d_inode) to d_is_dir(dentry). This is actually more
complicated than it appears as some calls should be converted to
d_can_lookup() instead. The difference is whether the directory in
question is a real dir with a ->lookup op or whether it's a fake dir with
a ->d_automount op.
In some circumstances, we can subsume checks for dentry->d_inode not being
NULL into this, provided we the code isn't in a filesystem that expects
d_inode to be NULL if the dirent really *is* negative (ie. if we're going to
use d_inode() rather than d_backing_inode() to get the inode pointer).
Note that the dentry type field may be set to something other than
DCACHE_MISS_TYPE when d_inode is NULL in the case of unionmount, where the VFS
manages the fall-through from a negative dentry to a lower layer. In such a
case, the dentry type of the negative union dentry is set to the same as the
type of the lower dentry.
However, if you know d_inode is not NULL at the call site, then you can use
the d_is_xxx() functions even in a filesystem.
There is one further complication: a 0,0 chardev dentry may be labelled
DCACHE_WHITEOUT_TYPE rather than DCACHE_SPECIAL_TYPE. Strictly, this was
intended for special directory entry types that don't have attached inodes.
The following perl+coccinelle script was used:
use strict;
my @callers;
open($fd, 'git grep -l \'S_IS[A-Z].*->d_inode\' |') ||
die "Can't grep for S_ISDIR and co. callers";
@callers = <$fd>;
close($fd);
unless (@callers) {
print "No matches\n";
exit(0);
}
my @cocci = (
'@@',
'expression E;',
'@@',
'',
'- S_ISLNK(E->d_inode->i_mode)',
'+ d_is_symlink(E)',
'',
'@@',
'expression E;',
'@@',
'',
'- S_ISDIR(E->d_inode->i_mode)',
'+ d_is_dir(E)',
'',
'@@',
'expression E;',
'@@',
'',
'- S_ISREG(E->d_inode->i_mode)',
'+ d_is_reg(E)' );
my $coccifile = "tmp.sp.cocci";
open($fd, ">$coccifile") || die $coccifile;
print($fd "$_\n") || die $coccifile foreach (@cocci);
close($fd);
foreach my $file (@callers) {
chomp $file;
print "Processing ", $file, "\n";
system("spatch", "--sp-file", $coccifile, $file, "--in-place", "--no-show-diff") == 0 ||
die "spatch failed";
}
[AV: overlayfs parts skipped]
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Includes of pnfs.h in export.c and fcntl.c also bring in xdr4.h, which
won't build without CONFIG_NFSD_V3, breaking non-V3 builds. Ifdef-out
most of pnfs.h in that case.
Reported-by: Bas Peters <baspeters93@gmail.com>
Reported-by: Jim Davis <jim.epost@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Fixes: 9cf514ccfa "nfsd: implement pNFS operations"
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We're supposed to be testing that the fh_fsid's match but because the
parenthesis are in the wrong place, then we only check the first
byte.
Fixes: 9558f2500a ('nfsd: add fh_fsid_match helper')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The code seems to work. The protocol looks stable. The kernel's
version defaults can be overridden by rpc.nfsd arguments.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Add a small shim between core nfsd and filesystems to translate the
somewhat cumbersome pNFS data structures and semantics to something
more palatable for Linux filesystems.
Thanks to Rick McNeal for the old prototype pNFS blocklayout server
code, which gave a lot of inspiration to this version even if no
code is left from it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
For now just a few simple events to trace the layout stateid lifetime, but
these already were enough to find several bugs in the Linux client layout
stateid handling.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Add support to issue layout recalls to clients. For now we only support
full-file recalls to get a simple and stable implementation. This allows
to embedd a nfsd4_callback structure in the layout_state and thus avoid
any memory allocations under spinlocks during a recall. For normal
use cases that do not intent to share a single file between multiple
clients this implementation is fully sufficient.
To ensure layouts are recalled on local filesystem access each layout
state registers a new FL_LAYOUT lease with the kernel file locking code,
which filesystems that support pNFS exports that require recalls need
to break on conflicting access patterns.
The XDR code is based on the old pNFS server implementation by
Andy Adamson, Benny Halevy, Boaz Harrosh, Dean Hildebrand, Fred Isaman,
Marc Eshel, Mike Sager and Ricardo Labiaga.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Add support for the GETDEVICEINFO, LAYOUTGET, LAYOUTCOMMIT and
LAYOUTRETURN NFSv4.1 operations, as well as backing code to manage
outstanding layouts and devices.
Layout management is very straight forward, with a nfs4_layout_stateid
structure that extends nfs4_stid to manage layout stateids as the
top-level structure. It is linked into the nfs4_file and nfs4_client
structures like the other stateids, and contains a linked list of
layouts that hang of the stateid. The actual layout operations are
implemented in layout drivers that are not part of this commit, but
will be added later.
The worst part of this commit is the management of the pNFS device IDs,
which suffers from a specification that is not sanely implementable due
to the fact that the device-IDs are global and not bound to an export,
and have a small enough size so that we can't store the fsid portion of
a file handle, and must never be reused. As we still do need perform all
export authentication and validation checks on a device ID passed to
GETDEVICEINFO we are caught between a rock and a hard place. To work
around this issue we add a new hash that maps from a 64-bit integer to a
fsid so that we can look up the export to authenticate against it,
a 32-bit integer as a generation that we can bump when changing the device,
and a currently unused 32-bit integer that could be used in the future
to handle more than a single device per export. Entries in this hash
table are never deleted as we can't reuse the ids anyway, and would have
a severe lifetime problem anyway as Linux export structures are temporary
structures that can go away under load.
Parts of the XDR data, structures and marshaling/unmarshaling code, as
well as many concepts are derived from the old pNFS server implementation
from Andy Adamson, Benny Halevy, Dean Hildebrand, Marc Eshel, Fred Isaman,
Mike Sager, Ricardo Labiaga and many others.
Signed-off-by: Christoph Hellwig <hch@lst.de>
The pnfs code will need it too. Also remove the nfsd_ prefix to match the
other filehandle helpers in that file.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Just like for other lock types we should allow different owners to have
a read lease on a file. Currently this can't happen, but with the addition
of pNFS layout leases we'll need this feature.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Someone with a weird time_t happened to notice this, it shouldn't really
manifest till 2038. It may not be our ownly year-2038 problem.
Reported-by: Aaron Pace <Aaron.Pace@alcatel-lucent.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Now that we use standard list_heads for tracking leases, we can have
lm_change take a pointer to the lease to be modified instead of a
double pointer.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Acked-by: Christoph Hellwig <hch@lst.de>
We can now add a dedicated spinlock without expanding struct inode.
Change to using that to protect the various i_flctx lists.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Remove the function renew_client() that is not used anywhere.
This was partially found by using a static code analysis program called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
RFC 3530 14.2.24 says
This value represents the length of the names of the directory
entries and the cookie value for these entries. This length
represents the XDR encoding of the data (names and cookies)...
The "xdr encoding" of the name should probably include the 4 bytes for
the length.
But this is all just a hint so not worth e.g. backporting to stable.
Also reshuffle some lines to more clearly group together the
dircount-related code.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
fi_delegees is always handled under the fi_lock, so there's no need to
use an atomic_t for this field.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently, nfs4_set_delegation takes a reference to an existing
delegation and then checks to see if there is a conflict. If there is
one, then it doesn't release that reference.
Change the code to take the reference after the check and only if there
is no conflict.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Pull nfsd updates from Bruce Fields:
"A comparatively quieter cycle for nfsd this time, but still with two
larger changes:
- RPC server scalability improvements from Jeff Layton (using RCU
instead of a spinlock to find idle threads).
- server-side NFSv4.2 ALLOCATE/DEALLOCATE support from Anna
Schumaker, enabling fallocate on new clients"
* 'for-3.19' of git://linux-nfs.org/~bfields/linux: (32 commits)
nfsd4: fix xdr4 count of server in fs_location4
nfsd4: fix xdr4 inclusion of escaped char
sunrpc/cache: convert to use string_escape_str()
sunrpc: only call test_bit once in svc_xprt_received
fs: nfsd: Fix signedness bug in compare_blob
sunrpc: add some tracepoints around enqueue and dequeue of svc_xprt
sunrpc: convert to lockless lookup of queued server threads
sunrpc: fix potential races in pool_stats collection
sunrpc: add a rcu_head to svc_rqst and use kfree_rcu to free it
sunrpc: require svc_create callers to pass in meaningful shutdown routine
sunrpc: have svc_wake_up only deal with pool 0
sunrpc: convert sp_task_pending flag to use atomic bitops
sunrpc: move rq_cachetype field to better optimize space
sunrpc: move rq_splice_ok flag into rq_flags
sunrpc: move rq_dropme flag into rq_flags
sunrpc: move rq_usedeferral flag to rq_flags
sunrpc: move rq_local field to rq_flags
sunrpc: add a generic rq_flags field to svc_rqst and move rq_secure to it
nfsd: minor off by one checks in __write_versions()
sunrpc: release svc_pool_map reference when serv allocation fails
...
Pull networking updates from David Miller:
1) New offloading infrastructure and example 'rocker' driver for
offloading of switching and routing to hardware.
This work was done by a large group of dedicated individuals, not
limited to: Scott Feldman, Jiri Pirko, Thomas Graf, John Fastabend,
Jamal Hadi Salim, Andy Gospodarek, Florian Fainelli, Roopa Prabhu
2) Start making the networking operate on IOV iterators instead of
modifying iov objects in-situ during transfers. Thanks to Al Viro
and Herbert Xu.
3) A set of new netlink interfaces for the TIPC stack, from Richard
Alpe.
4) Remove unnecessary looping during ipv6 routing lookups, from Martin
KaFai Lau.
5) Add PAUSE frame generation support to gianfar driver, from Matei
Pavaluca.
6) Allow for larger reordering levels in TCP, which are easily
achievable in the real world right now, from Eric Dumazet.
7) Add a variable of napi_schedule that doesn't need to disable cpu
interrupts, from Eric Dumazet.
8) Use a doubly linked list to optimize neigh_parms_release(), from
Nicolas Dichtel.
9) Various enhancements to the kernel BPF verifier, and allow eBPF
programs to actually be attached to sockets. From Alexei
Starovoitov.
10) Support TSO/LSO in sunvnet driver, from David L Stevens.
11) Allow controlling ECN usage via routing metrics, from Florian
Westphal.
12) Remote checksum offload, from Tom Herbert.
13) Add split-header receive, BQL, and xmit_more support to amd-xgbe
driver, from Thomas Lendacky.
14) Add MPLS support to openvswitch, from Simon Horman.
15) Support wildcard tunnel endpoints in ipv6 tunnels, from Steffen
Klassert.
16) Do gro flushes on a per-device basis using a timer, from Eric
Dumazet. This tries to resolve the conflicting goals between the
desired handling of bulk vs. RPC-like traffic.
17) Allow userspace to ask for the CPU upon what a packet was
received/steered, via SO_INCOMING_CPU. From Eric Dumazet.
18) Limit GSO packets to half the current congestion window, from Eric
Dumazet.
19) Add a generic helper so that all drivers set their RSS keys in a
consistent way, from Eric Dumazet.
20) Add xmit_more support to enic driver, from Govindarajulu
Varadarajan.
21) Add VLAN packet scheduler action, from Jiri Pirko.
22) Support configurable RSS hash functions via ethtool, from Eyal
Perry.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1820 commits)
Fix race condition between vxlan_sock_add and vxlan_sock_release
net/macb: fix compilation warning for print_hex_dump() called with skb->mac_header
net/mlx4: Add support for A0 steering
net/mlx4: Refactor QUERY_PORT
net/mlx4_core: Add explicit error message when rule doesn't meet configuration
net/mlx4: Add A0 hybrid steering
net/mlx4: Add mlx4_bitmap zone allocator
net/mlx4: Add a check if there are too many reserved QPs
net/mlx4: Change QP allocation scheme
net/mlx4_core: Use tasklet for user-space CQ completion events
net/mlx4_core: Mask out host side virtualization features for guests
net/mlx4_en: Set csum level for encapsulated packets
be2net: Export tunnel offloads only when a VxLAN tunnel is created
gianfar: Fix dma check map error when DMA_API_DEBUG is enabled
cxgb4/csiostor: Don't use MASTER_MUST for fw_hello call
net: fec: only enable mdio interrupt before phy device link up
net: fec: clear all interrupt events to support i.MX6SX
net: fec: reset fep link status in suspend function
net: sock: fix access via invalid file descriptor
net: introduce helper macro for_each_cmsghdr
...
Pull VFS changes from Al Viro:
"First pile out of several (there _definitely_ will be more). Stuff in
this one:
- unification of d_splice_alias()/d_materialize_unique()
- iov_iter rewrite
- killing a bunch of ->f_path.dentry users (and f_dentry macro).
Getting that completed will make life much simpler for
unionmount/overlayfs, since then we'll be able to limit the places
sensitive to file _dentry_ to reasonably few. Which allows to have
file_inode(file) pointing to inode in a covered layer, with dentry
pointing to (negative) dentry in union one.
Still not complete, but much closer now.
- crapectomy in lustre (dead code removal, mostly)
- "let's make seq_printf return nothing" preparations
- assorted cleanups and fixes
There _definitely_ will be more piles"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits)
copy_from_iter_nocache()
new helper: iov_iter_kvec()
csum_and_copy_..._iter()
iov_iter.c: handle ITER_KVEC directly
iov_iter.c: convert copy_to_iter() to iterate_and_advance
iov_iter.c: convert copy_from_iter() to iterate_and_advance
iov_iter.c: get rid of bvec_copy_page_{to,from}_iter()
iov_iter.c: convert iov_iter_zero() to iterate_and_advance
iov_iter.c: convert iov_iter_get_pages_alloc() to iterate_all_kinds
iov_iter.c: convert iov_iter_get_pages() to iterate_all_kinds
iov_iter.c: convert iov_iter_npages() to iterate_all_kinds
iov_iter.c: iterate_and_advance
iov_iter.c: macros for iterating over iov_iter
kill f_dentry macro
dcache: fix kmemcheck warning in switch_names
new helper: audit_file()
nfsd_vfs_write(): use file_inode()
ncpfs: use file_inode()
kill f_dentry uses
lockd: get rid of ->f_path.dentry->d_sb
...
This patch effectively reverts commit 500f808726 ("net: ovs: use CRC32
accelerated flow hash if available"), and other remaining arch_fast_hash()
users such as from nfsd via commit 6282cd5655 ("NFSD: Don't hand out
delegations for 30 seconds after recalling them.") where it has been used
as a hash function for bloom filtering.
While we think that these users are actually not much of concern, it has
been requested to remove the arch_fast_hash() library bits that arose
from [1] entirely as per recent discussion [2]. The main argument is that
using it as a hash may introduce bias due to its linearity (see avalanche
criterion) and thus makes it less clear (though we tried to document that)
when this security/performance trade-off is actually acceptable for a
general purpose library function.
Lets therefore avoid any further confusion on this matter and remove it to
prevent any future accidental misuse of it. For the time being, this is
going to make hashing of flow keys a bit more expensive in the ovs case,
but future work could reevaluate a different hashing discipline.
[1] https://patchwork.ozlabs.org/patch/299369/
[2] https://patchwork.ozlabs.org/patch/418756/
Cc: Neil Brown <neilb@suse.de>
Cc: Francesco Fusco <fusco@ntop.org>
Cc: Jesse Gross <jesse@nicira.com>
Cc: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix a bug where nfsd4_encode_components_esc() incorrectly calculates the
length of server array in fs_location4--note that it is a count of the
number of array elements, not a length in bytes.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Fixes: 082d4bd72a (nfsd4: "backfill" using write_bytes_to_xdr_buf)
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Fix a bug where nfsd4_encode_components_esc() includes the esc_end char as
an additional string encoding.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Cc: stable@vger.kernel.org
Fixes: e7a0444aef "nfsd: add IPv6 addr escaping to fs_location hosts"
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Bugs similar to the one in acbbe6fbb2 (kcmp: fix standard comparison
bug) are in rich supply.
In this variant, the problem is that struct xdr_netobj::len has type
unsigned int, so the expression o1->len - o2->len _also_ has type
unsigned int; it has completely well-defined semantics, and the result
is some non-negative integer, which is always representable in a long
long. But this means that if the conditional triggers, we are
guaranteed to return a positive value from compare_blob.
In this case it could be fixed by
- res = o1->len - o2->len;
+ res = (long long)o1->len - (long long)o2->len;
but I'd rather eliminate the usually broken 'return a - b;' idiom.
Reviewed-by: Jeff Layton <jlayton@primarydata.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In a later patch, we're going to need some atomic bit flags. Since that
field will need to be an unsigned long, we mitigate that space
consumption by migrating some other bitflags to the new field. Start
with the rq_secure flag.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
My static checker complains that if "len == remaining" then it means we
have truncated the last character off the version string.
The intent of the code is that we print as many versions as we can
without truncating a version. Then we put a newline at the end. If the
newline can't fit we return -EINVAL.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The currect code for nfsd41_cb_get_slot() and nfsd4_cb_done() has no
locking in order to guarantee atomicity, and so allows for races of
the form.
Task 1 Task 2
====== ======
if (test_and_set_bit(0) != 0) {
clear_bit(0)
rpc_wake_up_next(queue)
rpc_sleep_on(queue)
return false;
}
This patch breaks the race condition by adding a retest of the bit
after the call to rpc_sleep_on().
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Even when security labels are disabled we support at least the same
attributes as v4.1.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: stable@kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The global state_lock protects the file_hashtbl, and that has the
potential to be a scalability bottleneck.
Address this by making the file_hashtbl use RCU. Add a rcu_head to the
nfs4_file and use that when freeing ones that have been hashed. In order
to conserve space, we union the fi_rcu field with the fi_delegations
list_head which must be clear by the time the last reference to the file
is dropped.
Convert find_file_locked to use RCU lookup primitives and not to require
that the state_lock be held, and convert find_file to do a lockless
lookup. Convert find_or_add_file to attempt a lockless lookup first, and
then fall back to doing a locked search and insert if that fails to find
anything.
Also, minimize the number of times we need to calculate the hash value
by passing it in as an argument to the search and insert functions, and
optimize the order of arguments in nfsd4_init_file.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
DEALLOCATE only returns a status value, meaning we can use the noop()
xdr encoder to reply to the client.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The ALLOCATE operation is used to preallocate space in a file. I can do
this by using vfs_fallocate() to do the actual preallocation.
ALLOCATE only returns a status indicator, so we don't need to write a
special encode() function.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
They're a bit outdated wrt to some recent changes.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
A client may not want to use the back channel on a transport it sent
CREATE_SESSION on, in which case it clears SESSION4_BACK_CHAN.
However, cl_cb_addr should be populated anyway, to be used if the
client binds other connections to this session. If cl_cb_addr is
not initialized, rpc_create() fails when the server attempts to
set up a back channel on such secondary transports.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The vfs_fsync_range() call during write processing got the end of the
range off by one. The range is inclusive, not exclusive. The error has
nfsd sync more data than requested -- it's correct but unnecessary
overhead.
The call during commit processing is correct so I copied that pattern in
write processing. Maybe a helper would be nice but I kept it trivial.
This is untested. I found it while reviewing code for something else
entirely.
Signed-off-by: Zach Brown <zab@zabbo.net>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Unknown operation numbers are caught in nfsd4_decode_compound() which
sets op->opnum to OP_ILLEGAL and op->status to nfserr_op_illegal. The
error causes the main loop in nfsd4_proc_compound() to skip most
processing. But nfsd4_proc_compound also peeks ahead at the next
operation in one case and doesn't take similar precautions there.
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We added this new estimator function but forgot to hook it up. The
effect is that NFSv4.1 (and greater) won't do zero-copy reads.
The estimate was also wrong by 8 bytes.
Fixes: ccae70a9ee "nfsd4: estimate sequence response size"
Cc: stable@vger.kernel.org
Reported-by: Chuck Lever <chucklever@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Pull scheduler updates from Ingo Molnar:
"The main changes in this cycle were:
- Optimized support for Intel "Cluster-on-Die" (CoD) topologies (Dave
Hansen)
- Various sched/idle refinements for better idle handling (Nicolas
Pitre, Daniel Lezcano, Chuansheng Liu, Vincent Guittot)
- sched/numa updates and optimizations (Rik van Riel)
- sysbench speedup (Vincent Guittot)
- capacity calculation cleanups/refactoring (Vincent Guittot)
- Various cleanups to thread group iteration (Oleg Nesterov)
- Double-rq-lock removal optimization and various refactorings
(Kirill Tkhai)
- various sched/deadline fixes
... and lots of other changes"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (72 commits)
sched/dl: Use dl_bw_of() under rcu_read_lock_sched()
sched/fair: Delete resched_cpu() from idle_balance()
sched, time: Fix build error with 64 bit cputime_t on 32 bit systems
sched: Improve sysbench performance by fixing spurious active migration
sched/x86: Fix up typo in topology detection
x86, sched: Add new topology for multi-NUMA-node CPUs
sched/rt: Use resched_curr() in task_tick_rt()
sched: Use rq->rd in sched_setaffinity() under RCU read lock
sched: cleanup: Rename 'out_unlock' to 'out_free_new_mask'
sched: Use dl_bw_of() under RCU read lock
sched/fair: Remove duplicate code from can_migrate_task()
sched, mips, ia64: Remove __ARCH_WANT_UNLOCKED_CTXSW
sched: print_rq(): Don't use tasklist_lock
sched: normalize_rt_tasks(): Don't use _irqsave for tasklist_lock, use task_rq_lock()
sched: Fix the task-group check in tg_has_rt_tasks()
sched/fair: Leverage the idle state info when choosing the "idlest" cpu
sched: Let the scheduler see CPU idle states
sched/deadline: Fix inter- exclusive cpusets migrations
sched/deadline: Clear dl_entity params when setscheduling to different class
sched/numa: Kill the wrong/dead TASK_DEAD check in task_numa_fault()
...
Pull security subsystem updates from James Morris.
Mostly ima, selinux, smack and key handling updates.
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (65 commits)
integrity: do zero padding of the key id
KEYS: output last portion of fingerprint in /proc/keys
KEYS: strip 'id:' from ca_keyid
KEYS: use swapped SKID for performing partial matching
KEYS: Restore partial ID matching functionality for asymmetric keys
X.509: If available, use the raw subjKeyId to form the key description
KEYS: handle error code encoded in pointer
selinux: normalize audit log formatting
selinux: cleanup error reporting in selinux_nlmsg_perm()
KEYS: Check hex2bin()'s return when generating an asymmetric key ID
ima: detect violations for mmaped files
ima: fix race condition on ima_rdwr_violation_check and process_measurement
ima: added ima_policy_flag variable
ima: return an error code from ima_add_boot_aggregate()
ima: provide 'ima_appraise=log' kernel option
ima: move keyring initialization to ima_init()
PKCS#7: Handle PKCS#7 messages that contain no X.509 certs
PKCS#7: Better handling of unsupported crypto
KEYS: Overhaul key identification when searching for asymmetric keys
KEYS: Implement binary asymmetric key ID handling
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Hhee
-----END PGP SIGNATURE-----
Merge tag 'locks-v3.18-1' of git://git.samba.org/jlayton/linux
Pull file locking related changes from Jeff Layton:
"This release is a little more busy for file locking changes than the
last:
- a set of patches from Kinglong Mee to fix the lockowner handling in
knfsd
- a pile of cleanups to the internal file lease API. This should get
us a bit closer to allowing for setlease methods that can block.
There are some dependencies between mine and Bruce's trees this cycle,
and I based my tree on top of the requisite patches in Bruce's tree"
* tag 'locks-v3.18-1' of git://git.samba.org/jlayton/linux: (26 commits)
locks: fix fcntl_setlease/getlease return when !CONFIG_FILE_LOCKING
locks: flock_make_lock should return a struct file_lock (or PTR_ERR)
locks: set fl_owner for leases to filp instead of current->files
locks: give lm_break a return value
locks: __break_lease cleanup in preparation of allowing direct removal of leases
locks: remove i_have_this_lease check from __break_lease
locks: move freeing of leases outside of i_lock
locks: move i_lock acquisition into generic_*_lease handlers
locks: define a lm_setup handler for leases
locks: plumb a "priv" pointer into the setlease routines
nfsd: don't keep a pointer to the lease in nfs4_file
locks: clean up vfs_setlease kerneldoc comments
locks: generic_delete_lease doesn't need a file_lock at all
nfsd: fix potential lease memory leak in nfs4_setlease
locks: close potential race in lease_get_mtime
security: make security_file_set_fowner, f_setown and __f_setown void return
locks: consolidate "nolease" routines
locks: remove lock_may_read and lock_may_write
lockd: rip out deferred lock handling from testlock codepath
NFSD: Get reference of lockowner when coping file_lock
...
Pull nfsd updates from Bruce Fields:
"Highlights:
- support the NFSv4.2 SEEK operation (allowing clients to support
SEEK_HOLE/SEEK_DATA), thanks to Anna.
- end the grace period early in a number of cases, mitigating a
long-standing annoyance, thanks to Jeff
- improve SMP scalability, thanks to Trond"
* 'for-3.18' of git://linux-nfs.org/~bfields/linux: (55 commits)
nfsd: eliminate "to_delegation" define
NFSD: Implement SEEK
NFSD: Add generic v4.2 infrastructure
svcrdma: advertise the correct max payload
nfsd: introduce nfsd4_callback_ops
nfsd: split nfsd4_callback initialization and use
nfsd: introduce a generic nfsd4_cb
nfsd: remove nfsd4_callback.cb_op
nfsd: do not clear rpc_resp in nfsd4_cb_done_sequence
nfsd: fix nfsd4_cb_recall_done error handling
nfsd4: clarify how grace period ends
nfsd4: stop grace_time update at end of grace period
nfsd: skip subsequent UMH "create" operations after the first one for v4.0 clients
nfsd: set and test NFSD4_CLIENT_STABLE bit to reduce nfsdcltrack upcalls
nfsd: serialize nfsdcltrack upcalls for a particular client
nfsd: pass extra info in env vars to upcalls to allow for early grace period end
nfsd: add a v4_end_grace file to /proc/fs/nfsd
lockd: add a /proc/fs/lockd/nlm_end_grace file
nfsd: reject reclaim request when client has already sent RECLAIM_COMPLETE
nfsd: remove redundant boot_time parm from grace_done client tracking op
...
Christoph suggests:
"Add a return value to lm_break so that the lock manager can tell the
core code "you can delete this lease right now". That gets rid of
the games with the timeout which require all kinds of race avoidance
code in the users."
Do that here and have the nfsd lease break routine use it when it detects
that there was a race between setting up the lease and it being broken.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
There was only one place where we still could free a file_lock while
holding the i_lock -- lease_modify. Add a new list_head argument to the
lm_change operation, pass in a private list when calling it, and fix
those callers to dispose of the list once the lock has been dropped.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
...and move the fasync setup into it for fcntl lease calls. At the same
time, change the semantics of how the file_lock double-pointer is
handled. Up until now, on a successful lease return you got a pointer to
the lock on the list. This is bad, since that pointer can no longer be
relied on as valid once the inode->i_lock has been released.
Change the code to instead just zero out the pointer if the lease we
passed in ended up being used. Then the callers can just check to see
if it's NULL after the call and free it if it isn't.
The priv argument has the same semantics. The lm_setup function can
zero the pointer out to signal to the caller that it should not be
freed after the function returns.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
In later patches, we're going to add a new lock_manager_operation to
finish setting up the lease while still holding the i_lock. To do
this, we'll need to pass a little bit of info in the fcntl setlease
case (primarily an fasync structure). Plumb the extra pointer into
there in advance of that.
We declare this pointer as a void ** to make it clear that this is
private info, and that the caller isn't required to set this unless
the lm_setup specifically requires it.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Now that we don't need to pass in an actual lease pointer to
vfs_setlease on unlock, we can stop tracking a pointer to the lease in
the nfs4_file.
Switch all of the places that check the fi_lease to check fi_deleg_file
instead. We always set that at the same time so it will have the same
semantics.
Cc: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Ensure that it's OK to pass in a NULL file_lock double pointer on
a F_UNLCK request and convert the vfs_setlease F_UNLCK callers to
do just that.
Finally, turn the BUG_ON in generic_setlease into a WARN_ON_ONCE
with an error return. That's a problem we can handle without
crashing the box if it occurs.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
It's unlikely to ever occur, but if there were already a lease set on
the file then we could end up getting back a different pointer on a
successful setlease attempt than the one we allocated. If that happens,
the one we allocated could leak.
In practice, I don't think this will happen due to the fact that we only
try to set up the lease once per nfs4_file, but this error handling is a
bit more correct given the current lease API.
Cc: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
We now have cb_to_delegation and to_delegation, which do the same thing
and are defined separately in different .c files. Move the
cb_to_delegation definition into a header file and eliminate the
redundant to_delegation definition.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
The calculation of page_ptr here is wrong in the case the read doesn't
start at an offset that is a multiple of a page.
The result is that nfs4svc_encode_compoundres sets rq_next_page to a
value one too small, and then the loop in svc_free_res_pages may
incorrectly fail to clear a page pointer in rq_respages[].
Pages left in rq_respages[] are available for the next rpc request to
use, so xdr data may be written to that page, which may hold data still
waiting to be transmitted to the client or data in the page cache.
The observed result was silent data corruption seen on an NFSv4 client.
We tag this as "fixing" 05638dc73a because that commit exposed this
bug, though the incorrect calculation predates it.
Particular thanks to Andrea Arcangeli and David Gilbert for analysis and
testing.
Fixes: 05638dc73a "nfsd4: simplify server xdr->next_page use"
Cc: stable@vger.kernel.org
Reported-by: Andrea Arcangeli <aarcange@redhat.com>
Tested-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This patch adds server support for the NFS v4.2 operation SEEK, which
returns the position of the next hole or data segment in a file.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
It's cleaner to introduce everything at once and have the server reply
with "not supported" than it would be to introduce extra operations when
implementing a specific one in the middle of the list.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Add a higher level abstraction than the rpc_ops for callback operations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Split out initializing the nfs4_callback structure from using it. For
the NULL callback this gets rid of tons of pointless re-initializations.
Note that I don't quite understand what protects us from running multiple
NULL callbacks at the same time, but at least this chance doesn't make
it worse..
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Add a helper to queue up a callback. CB_NULL has a bit of special casing
because it is special in the specification, but all other new callback
operations will be able to share code with this and a few more changes
to refactor the callback code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We can always get at the private data by using container_of, no need for
a void pointer. Also introduce a little to_delegation helper to avoid
opencoding the container_of everywhere.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This is incorrect when a callback is has to be restarted, in which case
the XDR decoding of the second iteration will see a NULL cb argument.
[hch: updated description]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
For any error that is not EBADHANDLE or NFS4ERR_BAD_STATEID,
nfsd4_cb_recall_done first marks the connection down, then
retries until dl_retries hits zero, then marks the connection down
again and sets cb_done. This changes the code to only retry
for EBADHANDLE or NFS4ERR_BAD_STATEID, and factors setting
cb_done into a single point in the function.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The grace period is ended in two steps--first userland is notified that
the grace period is now long enough that any clients who have not yet
reclaimed can be safely forgotten, then we flip the switch that forbids
reclaims and allows new opens. I had to think a bit to convince myself
that the ordering was right here. Document it.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The attempt to automatically set a new grace period time at the end of
the grace period isn't really helpful. We'll probably shut down and
reboot before we actually make use of the new grace period time anyway.
So may as well leave it up to the init system to get this right.
This just confuses people when they see /proc/fs/nfsd/nfsv4gracetime
change from what they set it to.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In the case of v4.0 clients, we may call into the "create" client
tracking operation multiple times (once for each openowner). Upcalling
for each one of those is wasteful and slow however. We can skip doing
further "create" operations after the first one if we know that one has
already been done.
v4.1+ clients generally only call into this function once (on
RECLAIM_COMPLETE), and we can't skip upcalling on the create even if the
STABLE bit is set. Doing so would make it impossible for nfsdcltrack to
lift the grace period early since the timestamp has a different meaning
in the case where the client is expected to issue a RECLAIM_COMPLETE.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
The nfsdcltrack upcall doesn't utilize the NFSD4_CLIENT_STABLE flag,
which basically results in an upcall every time we call into the client
tracking ops.
Change it to set this bit on a successful "check" or "create" request,
and clear it on a "remove" request. Also, check to see if that bit is
set before upcalling on a "check" or "remove" request, and skip
upcalling appropriately, depending on its state.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
In a later patch, we want to add a flag that will allow us to reduce the
need for upcalls. In order to handle that correctly, we'll need to
ensure that racing upcalls for the same client can't occur. In practice
it should be rare for this to occur with a well-behaved client, but it
is possible.
Convert one of the bits in the cl_flags field to be an upcall bitlock,
and use it to ensure that upcalls for the same client are serialized.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
In order to support lifting the grace period early, we must tell
nfsdcltrack what sort of client the "create" upcall is for. We can't
reliably tell if a v4.0 client has completed reclaiming, so we can only
lift the grace period once all the v4.1+ clients have issued a
RECLAIM_COMPLETE and if there are no v4.0 clients.
Also, in order to lift the grace period, we have to tell userland when
the grace period started so that it can tell whether a RECLAIM_COMPLETE
has been issued for each client since then.
Since this is all optional info, we pass it along in environment
variables to the "init" and "create" upcalls. By doing this, we don't
need to revise the upcall format. The UMH upcall can simply make use of
this info if it happens to be present. If it's not then it can just
avoid lifting the grace period early.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Allow a privileged userland process to end the v4 grace period early.
Writing "Y", "y", or "1" to the file will cause the v4 grace period to
be lifted. The basic idea with this will be to allow the userland
client tracking program to lift the grace period once it knows that no
more clients will be reclaiming state.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
As stated in RFC 5661, section 18.51.3:
Once a RECLAIM_COMPLETE is done, there can be no further reclaim
operations for locks whose scope is defined as having completed
recovery. Once the client sends RECLAIM_COMPLETE, the server will
not allow the client to do subsequent reclaims of locking state for
that scope and, if these are attempted, will return
NFS4ERR_NO_GRACE.
Ensure that we enforce that requirement.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Currently, all of the grace period handling is part of lockd. Eventually
though we'd like to be able to build v4-only servers, at which point
we'll need to put all of this elsewhere.
Move the code itself into fs/nfs_common and have it build a grace.ko
module. Then, rejigger the Kconfig options so that both nfsd and lockd
enable it automatically.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
This fixes a failure in xfstests generic/313 because nfs doesn't update
mtime on a truncate. The protocol requires this to be done implicity
for a size changing setattr.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
v5: using nfs4_get_stateowner() instead of an inline function
v3: Update based on Jeff's comments
v2: Fix bad using of struct file_lock_operations for handle the owner
Acked-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
v5: same as the first version
Reviewed-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Empty files and missing xattrs do not guarantee that a file was
just created. This patch passes FILE_CREATED flag to IMA to
reliably identify new files.
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: <stable@vger.kernel.org> 3.14+
Commit 3b29970909 "nfsd4: enforce rd_dircount" totally misunderstood
rd_dircount; it refers to total non-attribute bytes returned, not number
of directory entries returned.
Bring the code into agreement with RFC 3530 section 14.2.24.
Cc: stable@vger.kernel.org
Fixes: 3b29970909 "nfsd4: enforce rd_dircount"
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The working group appears committed to keeping the protocol stable, the
code has gotten some use and seems to work OK.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Recent NFS v4.2 drafts have removed NFS4ERR_METADATA_NOTSUPP and
reassigned the error code to NFS4ERR_UNION_NOTSUPP.
I also add in the NFS4ERR_OFFLOAD_NO_REQS error code.
We're not using any of these yet, so there's no harm done.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
locks_alloc_lock() has initialized struct file_lock, no need to
re-initialize it here.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Reviewed-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
One of our customer's application only needs file names, not file
attributes. With directories having 10K+ inodes (assuming buffer cache
has directory blocks cached having file names, but inode cache is
limited and hence need eviction of older cached inodes), older inodes
are evicted periodically. So if they keep on doing readdir(2) from NSF
client on multiple directories, some directory's files are periodically
removed from inode cache and hence new readdir(2) on same directory
requires disk access to bring back inodes again to inode cache.
As READDIRPLUS request fetches attributes also, doing getattr on each
file on server, it causes unnecessary disk accesses. If READDIRPLUS on
NFS client is returned with -ENOTSUPP, NFS client uses READDIR request
which just gets the names of the files in a directory, not attributes,
hence avoiding disk accesses on server.
There's already a corresponding client-side mount option, but an export
option reduces the need for configuration across multiple clients.
This flag affects NFSv3 only. If it turns out it's needed for NFSv4 as
well then we may have to figure out how to extend the behavior to NFSv4,
but it's not currently obvious how to do that.
Signed-off-by: Rajesh Ghanekar <rajesh_ghanekar@symantec.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
As of 8c7424cff6 "nfsd4: don't try to encode conflicting owner if low
on space", we permit the server to process a LOCK operation even if
there might not be space to return the conflicting lockowner, because
we've made returning the conflicting lockowner optional.
However, the rpc server still wants to know the most we might possibly
return, so we need to take into account the possible conflicting
lockowner in the svc_reserve_space() call here.
Symptoms were log messages like "RPC request reserved 88 but used 108".
Fixes: 8c7424cff6 "nfsd4: don't try to encode conflicting owner if low on space"
Reported-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
When creating a file that already exists in a read-only directory with
O_EXCL, the NFSv3 server returns EACCES rather than EEXIST (which local
files and the NFSv4 server return). Fix this by checking the MAY_CREATE
permission only if the file does not exist. Since this already happens
in do_nfsd_create, the check in nfsd3_proc_create can simply be removed.
Signed-off-by: Ross Lagerwall <rosslagerwall@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently, we hold the state_lock when releasing the lease. That's
potentially problematic in the future if we allow for setlease methods
that can sleep. Move the nfs4_put_deleg_lease call out of the delegation
unhashing routine (which was always a bit goofy anyway), and into the
unlocked sections of the callers of unhash_delegation_locked.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently these fields are protected with the state_lock, but that
doesn't really make a lot of sense. These fields are "private" to the
nfs4_file, and can be protected with the more granular fi_lock.
The fi_lock is already held when setting these fields. Make the code
hold the fp->fi_lock when clearing the lease-related fields in the
nfs4_file, and no longer require that the state_lock be held when
calling into this function.
To prevent lock inversion with the i_lock, we also move the vfs_setlease
and fput calls outside of the fi_lock. This also sets us up for allowing
vfs_setlease calls to block in the future.
Finally, remove a redundant NULL pointer check. unhash_delegation_locked
locks the fp->fi_lock prior to that check, so fp in that function must
never be NULL.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We would normally expect the xid and the checksum to be the best
discriminators. Check them before looking at the procedure number,
etc.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
...so we can remove the spinlocking around it.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Now that the lru list is per-bucket, we don't need a second list for
searches.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Pull nfsd updates from Bruce Fields:
"This includes a major rewrite of the NFSv4 state code, which has
always depended on a single mutex. As an example, open creates are no
longer serialized, fixing a performance regression on NFSv3->NFSv4
upgrades. Thanks to Jeff, Trond, and Benny, and to Christoph for
review.
Also some RDMA fixes from Chuck Lever and Steve Wise, and
miscellaneous fixes from Kinglong Mee and others"
* 'for-3.17' of git://linux-nfs.org/~bfields/linux: (167 commits)
svcrdma: remove rdma_create_qp() failure recovery logic
nfsd: add some comments to the nfsd4 object definitions
nfsd: remove the client_mutex and the nfs4_lock/unlock_state wrappers
nfsd: remove nfs4_lock_state: nfs4_state_shutdown_net
nfsd: remove nfs4_lock_state: nfs4_laundromat
nfsd: Remove nfs4_lock_state(): reclaim_complete()
nfsd: Remove nfs4_lock_state(): setclientid, setclientid_confirm, renew
nfsd: Remove nfs4_lock_state(): exchange_id, create/destroy_session()
nfsd: Remove nfs4_lock_state(): nfsd4_open and nfsd4_open_confirm
nfsd: Remove nfs4_lock_state(): nfsd4_delegreturn()
nfsd: Remove nfs4_lock_state(): nfsd4_open_downgrade + nfsd4_close
nfsd: Remove nfs4_lock_state(): nfsd4_lock/locku/lockt()
nfsd: Remove nfs4_lock_state(): nfsd4_release_lockowner
nfsd: Remove nfs4_lock_state(): nfsd4_test_stateid/nfsd4_free_stateid
nfsd: Remove nfs4_lock_state(): nfs4_preprocess_stateid_op()
nfsd: remove old fault injection infrastructure
nfsd: add more granular locking to *_delegations fault injectors
nfsd: add more granular locking to forget_openowners fault injector
nfsd: add more granular locking to forget_locks fault injector
nfsd: add a list_head arg to nfsd_foreach_client_lock
...
Add some comments that describe what each of these objects is, and how
they related to one another.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Also destroy_clientid and bind_conn_to_session.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Remove the old nfsd_for_n_state function and move nfsd_find_client
higher up into the file to get rid of forward declaration. Remove
the struct nfsd_fault_inject_op arguments from the operations as
they are no longer needed by any of them.
Finally, remove the old "standard" get and set routines, which
also eliminates the client_mutex from this code.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
...instead of relying on the client_mutex.
Also, fix up the printk output that is generated when the file is read.
It currently says that it's reporting the number of open files, but
it's actually reporting the number of openowners.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In a later patch, we'll want to collect the locks onto a list for later
destruction. If "func" is defined and "collect" is defined, then we'll
add the lock stateid to the list.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
...which uses the client_lock for protection instead of client_mutex.
Also remove nfsd_forget_client as there are no more callers.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
...that relies on the client_lock instead of client_mutex.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Add a new "get" routine for forget_clients that relies on the
client_lock instead of the client_mutex.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Now that we've added more granular locking in other places, it's time
to address the fault injection code. This code is currently quite
reliant on the client_mutex for protection. Start to change this by
adding a new set of fault injection op vectors.
For now they all use the legacy ones. In later patches we'll add new
routines that can deal with more granular locking.
Also, move some of the printk routines into the callers to make the
results of the operations more uniform.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The clid counter is a global counter currently. Move it to be a per-net
property so that it can be properly protected by the nn->client_lock
instead of relying on the client_mutex.
The verifier generator is also potentially racy if there are two
simultaneous callers. Generate the verifier when we generate the clid
value, so it's also created under the client_lock. With this, there's
no need to keep two counters as they'd always be in sync anyway, so
just use the clientid_counter for both.
As Trond points out, what would be best is to eventually move this
code to use IDR instead of the hash tables. That would also help ensure
uniqueness, but that's probably best done as a separate project.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
It's possible that we'll have an in-progress call on some of the clients
while a rogue EXCHANGE_ID or DESTROY_CLIENTID call comes in. Be sure to
try and mark the client expired first, so that the refcount is
respected.
This will only be a problem once the client_mutex is removed.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If it fails, it means that the client is in use and so destroying it
would be bad. Currently, the client_mutex prevents this from happening
but once we remove it, we won't be able to do this.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
All the callers except for the fault injection code call it directly
afterward, and in the fault injection case it won't hurt to do so
anyway.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently, it's protected by the client_mutex. Move it so that the list
and the fields in the openowner are protected by the client_lock.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Ensure that the client lookup is done safely under the client_lock, so
we're not relying on the client_mutex.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
...instead of relying on the client_mutex.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In particular, we want to ensure that the move_to_confirmed() is
protected by the nn->client_lock spin lock, so that we can use that when
looking up the clientid etc. instead of relying on the client_mutex.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
...instead of relying on the client_mutex.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
For efficiency reasons, and because we want to use spin locks instead
of relying on the client_mutex.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The struct nfs_client is supposed to be invisible and unreferenced
before it gets here.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If we leave the client on the confirmed/unconfirmed tables, and leave
the sessions visible on the sessionid_hashtbl, then someone might
find them before we've had a chance to destroy them.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
When we remove the client_mutex protection, we will need to ensure
that it can't be found by other threads while we're destroying it.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
A memory allocation failure could cause nfsd_startup_generic to fail, in
which case nfsd_users wouldn't be incorrectly left elevated.
After nfsd restarts nfsd_startup_generic will then succeed without doing
anything--the first consequence is likely nfs4_start_net finding a bad
laundry_wq and crashing.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Fixes: 4539f14981 "nfsd: replace boolean nfsd_up flag by users counter"
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
...to better match other functions that deal with open/lock stateids.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
When we remove the client_mutex, we'll have a potential race between
FREE_STATEID and CLOSE.
The root of the problem is that we are walking the st_locks list,
dropping the spinlock and then trying to release the persistent
reference to the lockstateid. In between, a FREE_STATEID call can come
along and take the lock, find the stateid and then try to put the
reference. That leads to a double put.
Fix this by not releasing the cl_lock in order to release each lock
stateid. Use put_generic_stateid_locked to unhash them and gather them
onto a list, and free_ol_stateid_reaplist to free any that end up on the
list.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Releasing an openowner is a bit inefficient as it can potentially thrash
the cl_lock if you have a lot of stateids attached to it. Once we remove
the client_mutex, it'll also potentially be dangerous to do this.
Add some functions to make it easier to defer the part of putting a
generic stateid reference that needs to be done outside the cl_lock while
doing the parts that must be done while holding it under a single lock.
First we unhash each open stateid. Then we call
put_generic_stateid_locked which will put the reference to an
nfs4_ol_stateid. If it turns out to be the last reference, it'll go
ahead and remove the stid from the IDR tree and put it onto the reaplist
using the st_locks list_head.
Then, after dropping the lock we'll call free_ol_stateid_reaplist to
walk the list of stateids that are fully unhashed and ready to be freed,
and free each of them. This function can sleep, so it must be done
outside any spinlocks.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Once we remove the client_mutex, it'll be possible for the sc_type of a
lock stateid to change after it's found and checked, but before we can
go to destroy it. If that happens, we can end up putting the persistent
reference to the stateid more than once, and unhash it more than once.
Fix this by unhashing the lock stateid prior to dropping the cl_lock but
after finding it.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Reduce the cl_lock trashing in destroy_lockowner. Unhash all of the
lockstateids on the lockowner's list. Put the reference under the lock
and see if it was the last one. If so, then add it to a private list
to be destroyed after we drop the lock.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Once we remove the client_mutex, we'll need to properly protect
the stateowner reference counts using the cl_lock.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Do more within the main loop, and simplify the function a bit. Also,
there's no need to take a stateowner reference unless we're going to call
release_lockowner.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Preparation for removing the client_mutex.
Convert the open owner hash table into a per-client table and protect it
using the nfs4_client->cl_lock spin lock.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Once we remove client mutex protection, we'll need to ensure that
stateowner lookup and creation are atomic between concurrent compounds.
Ensure that alloc_init_lock_stateowner checks the hashtable under the
client_lock before adding a new element.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Once we remove client mutex protection, we'll need to ensure that
stateowner lookup and creation are atomic between concurrent compounds.
Ensure that alloc_init_open_stateowner checks the hashtable under the
client_lock before adding a new element.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Once we remove client_mutex protection, it'll be possible to have an
in-flight operation using an openstateid when a CLOSE call comes in.
If that happens, we can't just put the sc_file reference and clear its
pointer without risking an oops.
Fix this by ensuring that v4.0 CLOSE operations wait for the refcount
to drop before proceeding to do so.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Change it so that only openstateids hold persistent references to
openowners. References can still be held by compounds in progress.
With this, we can get rid of NFS4_OO_NEW. It's possible that we
will create a new openowner in the process of doing the open, but
something later fails. In the meantime, another task could find
that openowner and start using it on a successful open. If that
occurs we don't necessarily want to tear it down, just put the
reference that the failing compound holds.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Ensure that lockowner references are only held by lockstateids and
operations that are in-progress. With this, we can get rid of
release_lockowner_if_empty, which will be racy once we remove
client_mutex protection.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
A necessary step toward client_mutex removal.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Allow stateowners to be unhashed and destroyed when the last reference
is put. The unhashing must be idempotent. In a future patch, we'll add
some locking around it, but for now it's only protected by the
client_mutex.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Ensure that when finding or creating a lockowner, that we get a
reference to it. For now, we also take an extra reference when a
lockowner is created that can be put when release_lockowner is called,
but we'll remove that in a later patch once we change how references are
held.
Since we no longer destroy lockowners in the event of an error in
nfsd4_lock, we must change how the seqid gets bumped in the lk_is_new
case. Instead of doing so on creation, do it manually in nfsd4_lock.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We don't want to rely on the client_mutex for protection in the case of
NFSv4 open owners. Instead, we add a mutex that will only be taken for
NFSv4.0 state mutating operations, and that will be released once the
entire compound is done.
Also, ensure that nfsd4_cstate_assign_replay/nfsd4_cstate_clear_replay
take a reference to the stateowner when they are using it for NFSv4.0
open and lock replay caching.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The way stateowners are managed today is somewhat awkward. They need to
be explicitly destroyed, even though the stateids reference them. This
will be particularly problematic when we remove the client_mutex.
We may create a new stateowner and attempt to open a file or set a lock,
and have that fail. In the meantime, another RPC may come in that uses
that same stateowner and succeed. We can't have the first task tearing
down the stateowner in that situation.
To fix this, we need to change how stateowners are tracked altogether.
Refcount them and only destroy them once all stateids that reference
them have been destroyed. This patch starts by adding the refcounting
necessary to do that.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Allow nfs4_find_stateid_by_type to take the stateid reference, while
still holding the &cl->cl_lock. Necessary step toward client_mutex
removal.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Allow nfs4_lookup_stateid to take the stateid reference, instead
of having all the callers do so.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Allow nfs4_preprocess_seqid_op to take the stateid reference, instead
of having all the callers do so.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Ensure that all the callers put the open stateid after use.
Necessary step toward client_mutex removal.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Ensure that nfsd4_open_confirm() keeps a reference to the open
stateid until it is done working with it.
Necessary step toward client_mutex removal.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Prepare nfsd4_close for a future where nfs4_preprocess_seqid_op()
hands it a fully referenced open stateid. Necessary step toward
client_mutex removal.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Ensure that nfsd4_process_open2() keeps a reference to the open
stateid until it is done working with it. Necessary step toward
client_mutex removal.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Ensure that nfsd4_process_open2() keeps a reference to the delegation
stateid until it is done working with it. Necessary step toward
client_mutex removal.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Ensure that nfs4_open_delegation() keeps a reference to the delegation
stateid until it is done working with it. Necessary step toward
client_mutex removal.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Ensure that nfsd4_locku() keeps a reference to the lock stateid
until it is done working with it. Necessary step toward client_mutex
removal.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Ensure that nfsd4_lock() references the lock stateid while it is
manipulating it. Not currently necessary, but will be once the
client_mutex is removed.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Hold the cl_lock over the bulk of these functions. In addition to
ensuring that they aren't freed prematurely, this will also help prevent
a potential race that could be introduced later. Once we remove the
client_mutex, it'll be possible for FREE_STATEID and CLOSE to race and
for both to try to put the "persistent" reference to the stateid.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Preparation for removal of the client_mutex.
Currently, no lock aside from the client_mutex is held when calling
find_lock_state. Ensure that the cl_lock is held by adding a lockdep
assertion.
Once we remove the client_mutex, it'll be possible for another thread to
race in and insert a lock state for the same file after we search but
before we insert a new one. Ensure that doesn't happen by redoing the
search after allocating a new stid that we plan to insert. If one is
found just put the one that was allocated.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Change to using the clp->cl_lock for this. For now, there's a lot of
cl_lock thrashing, but in later patches we'll eliminate that and close
the potential races that can occur when releasing the cl_lock while
walking the lists. For now, the client_mutex prevents those races.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Releasing locks when we unhash the stateid instead of doing so only when
the stateid is actually released will be problematic in later patches
when we need to protect the unhashing with spinlocks. Move it into the
sc_free operation instead.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently, this is serialized by the client_mutex, which is slated for
removal. Add finer-grained locking here. Also, do some cleanup around
find_stateid to prepare for taking references.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Benny Halevy <bhalevy@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
All stateids are associated with a nfs4_file. Let's consolidate.
Replace delegation->dl_file with the dl_stid.sc_file, and
nfs4_ol_stateid->st_file with st_stid.sc_file.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
When we remove the client_mutex, we'll need to be able to ensure that
these objects aren't destroyed while we're not holding locks.
Add a ->free() callback to the struct nfs4_stid, so that we can
release a reference to the stid without caring about the contents.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
It's possible for nfsd to fail opening a file that it has just created.
When that happens, we throw a WARN but it doesn't include any info about
the error code. Print the status code to give us a bit more info.
Our QA group hit some of these warnings under some very heavy stress
testing. My suspicion is that they hit the file-max limit, but it's hard
to know for sure. Go ahead and add a -ENFILE mapping to
nfserr_serverfault to make the error more distinct (and correct).
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Now that the nfs4_file has a filehandle in it, we no longer need to
keep a per-delegation copy of it. Switch to using the one in the
nfs4_file instead.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The state lock can be fairly heavily contended, and there's no reason
that nfs4_file lookups and delegation_blocked should be mutually
exclusive. Let's give the new block_delegation code its own spinlock.
It does mean that we'll need to take a different lock in the delegation
break code, but that's not generally as critical to performance.
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Move the alloc_init_deleg call into nfs4_set_delegation and change the
function to return a pointer to the delegation or an IS_ERR return. This
allows us to skip allocating a delegation if the file has already
experienced a lease conflict.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
No need to pass in a net pointer since we can derive that.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We want to convert to an atomic type so that we don't need to lock
across the call to alloc_init_deleg(). Then convert to a long type so
that we match the size of 'max_delegations'.
None of this is a problem today, but it will be once we remove
client_mutex protection.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently, both destroy_revoked_delegation and revoke_delegation
manipulate the cl_revoked list without any locking aside from the
client_mutex. Ensure that the clp->cl_lock is held when manipulating it,
except for the list walking in destroy_client. At that point, the client
should no longer be in use, and so it should be safe to walk the list
without any locking. That also means that we don't need to do the
list_splice_init there either.
Also, the fact that revoke_delegation deletes dl_recall_lru list_head
without any locking makes it difficult to know whether it's doing so
safely in all cases. Move the list_del_init calls into the callers, and
add a WARN_ON in the event that t's passed a delegation that has a
non-empty list_head.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Ensure that the delegations cannot be found by the laundromat etc once
we add them to the various 'revoke' lists.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Don't allow stateids to clear the open file pointer until they are
being destroyed. In a later patches we'll want to rely on the fact that
we have a valid file pointer when dealing with the stateid and this
will save us from having to do a lot of NULL pointer checks before
doing so.
Also, move to allocating stateids with kzalloc and get rid of the
explicit zeroing of fields.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Remove the fi_inode field in struct nfs4_file in order to remove the
possibility of struct nfs4_file pinning the inode when it does not have
any open state.
The only place we still need to get to an inode is in check_for_locks,
so change it to use find_any_file and use the inode from any that it
finds. If it doesn't find one, then just assume there aren't any.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
...instead of just checking the inode that corresponds to it.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This makes more sense anyway since an inode pointer value can change
even when the filehandle doesn't.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
For use when we may not have a struct inode.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Replace a comma between expression statements by a semicolon. This changes
the semantics of the code, but given the current indentation appears to be
what is intended.
A simplified version of the Coccinelle semantic patch that performs this
transformation is as follows:
// <smpl>
@r@
expression e1,e2;
@@
e1
-,
+;
e2;
// </smpl>
Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Open stateids must be initialized with the st_access_bmap and
st_deny_bmap set to 0, so that nfs4_get_vfs_file can properly record
their state in old_access_bmap and old_deny_bmap.
This bug was introduced in commit baeb4ff0e5 (nfsd: make deny mode
enforcement more efficient and close races in it) and was causing the
refcounts to end up incorrect when nfs4_get_vfs_file returned an error
after bumping the refcounts. This made it impossible to unmount the
underlying filesystem after running pynfs tests that involve deny modes.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Commit 8c7424cff6 "nfsd4: don't try to encode conflicting owner if low
on space" forgot to free conf->data in nfsd4_encode_lockt and before
sign conf->data to NULL in nfsd4_encode_lock_denied, causing a leak.
Worse, kfree() can be called on an uninitialized pointer in the case of
a succesful lock (or one that fails for a reason other than a conflict).
(Note that lock->lk_denied.ld_owner.data appears it should be zero here,
until you notice that it's one arm of a union the other arm of which is
written to in the succesful case by the
memcpy(&lock->lk_resp_stateid, &lock_stp->st_stid.sc_stateid,
sizeof(stateid_t));
in nfsd4_lock(). In the 32-bit case this overwrites ld_owner.data.)
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Fixes: 8c7424cff6 ""nfsd4: don't try to encode conflicting owner if low on space"
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
There's a potential race between a lease break and DELEGRETURN call.
Suppose a lease break comes in and queues the workqueue job for a
delegation, but it doesn't run just yet. Then, a DELEGRETURN comes in
finds the delegation and calls destroy_delegation on it to unhash it and
put its primary reference.
Next, the workqueue job runs and queues the delegation back onto the
del_recall_lru list, issues the CB_RECALL and puts the final reference.
With that, the final reference to the delegation is put, but it's still
on the LRU list.
When we go to unhash a delegation, it's because we intend to get rid of
it soon afterward, so we don't want lease breaks to mess with it once
that occurs. Fix this by bumping the dl_time whenever we unhash a
delegation, to ensure that lease breaks don't monkey with it.
I believe this is a regression due to commit 02e1215f9f (nfsd: Avoid
taking state_lock while holding inode lock in nfsd_break_one_deleg).
Prior to that, the state_lock was held in the lm_break callback itself,
and that would have prevented this race.
Cc: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We will want to add reference counting to the lock stateid and open
stateids too in later patches.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If nfs4_setlease succesfully acquires a new delegation, then another
task breaks the delegation before we reach hash_delegation_locked, then
the breaking task will see an empty fi_delegations list and do nothing.
The client will receive an open reply incorrectly granting a delegation
and will never receive a recall.
Move more of the delegation fields to be protected by the fi_lock. It's
more granular than the state_lock and in later patches we'll want to
be able to rely on it in addition to the state_lock.
Attempt to acquire a delegation. If that succeeds, take the spinlocks
and then check to see if the file has had a conflict show up since then.
If it has, then we assume that the lease is no longer valid and that
we shouldn't hand out a delegation.
There's also one more potential (but very unlikely) problem. If the
lease is broken before the delegation is hashed, then it could leak.
In the event that the fi_delegations list is empty, reset the
fl_break_time to jiffies so that it's cleaned up ASAP by
the normal lease handling code.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
nfsd4_probe_callback kicks off some work that will eventually run
nfsd4_process_cb_update and update the session flags. In theory we
could process a following SEQUENCE call before that update happens
resulting in flags that don't accurately represent, for example, the
lack of a backchannel.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The current code always selects XPRT_TRANSPORT_BC_TCP for the back
channel, even when the forward channel was not TCP (eg, RDMA). When
a 4.1 mount is attempted with RDMA, the server panics in the TCP BC
code when trying to send CB_NULL.
Instead, construct the transport protocol number from the forward
channel transport or'd with XPRT_TRANSPORT_BC. Transports that do
not support bi-directional RPC will not have registered a "BC"
transport, causing create_backchannel_client() to fail immediately.
Fixes: https://bugzilla.linux-nfs.org/show_bug.cgi?id=265
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The first 8 ops of the compound are zeroed since they're a part of the
argument that's zeroed by the
memset(rqstp->rq_argp, 0, procp->pc_argsize);
in svc_process_common(). But we handle larger compounds by allocating
the memory on the fly in nfsd4_decode_compound(). Other than code
recently fixed by 01529e3f81 "NFSD: Fix memory leak in encoding denied
lock", I don't know of any examples of code depending on this
initialization. But it definitely seems possible, and I'd rather be
safe.
Compounds this long are unusual so I'm much more worried about failure
in this poorly tested cases than about an insignificant performance hit.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
sparse says:
fs/nfsd/auth.c:31:38: warning: incorrect type in argument 1 (different address spaces)
fs/nfsd/auth.c:31:38: expected struct cred const *cred
fs/nfsd/auth.c:31:38: got struct cred const [noderef] <asn:4>*real_cred
Add a new accessor for the ->real_cred and use that to fetch the
pointer. Accessing current->real_cred directly is actually quite safe
since we know that they can't go away so this is mostly a cosmetic fixup
to silence sparse.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Add an extra delegation state to allow the stateid to remain in the idr
tree until the last reference has been released. This will be necessary
to ensure uniqueness once the client_mutex is removed.
[jlayton: reset the sc_type under the state_lock in unhash_delegation]
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
No need to pass the delegation pointer in here as it's only used to get
the nfs4_file pointer.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
state_lock is a heavily contended global lock. We don't want to grab
that while simultaneously holding the inode->i_lock.
Add a new per-nfs4_file lock that we can use to protect the
per-nfs4_file delegation list. Hold that while walking the list in the
break_deleg callback and queue the workqueue job for each one.
The workqueue job can then take the state_lock and do the list
manipulations without the i_lock being held prior to starting the
rpc call.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
It's just an obfuscated INIT_WORK call. Just make the work_func_t a
non-static symbol and use a normal INIT_WORK call.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Note that the caller has already reserved space for count and eof, so
xdr->p has already moved past them, only the padding remains.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Fixes dc97618ddd (nfsd4: separate splice and readv cases)
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Commit 4ac7249ea5 (nfsd: use get_acl and ->set_acl)
don't check the acl returned from get_acl()/posix_acl_from_mode().
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Rename it to better describe what it does, and have it just return the
stateid instead of a __be32 (which is now always nfs_ok). Also, do the
search for an existing stateid after the delegation check, to reduce
cleanup if the delegation check returns error.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The current enforcement of deny modes is both inefficient and scattered
across several places, which makes it hard to guarantee atomicity. The
inefficiency is a problem now, and the lack of atomicity will mean races
once the client_mutex is removed.
First, we address the inefficiency. We have to track deny modes on a
per-stateid basis to ensure that open downgrades are sane, but when the
server goes to enforce them it has to walk the entire list of stateids
and check against each one.
Instead of doing that, maintain a per-nfs4_file deny mode. When a file
is opened, we simply set any deny bits in that mode that were specified
in the OPEN call. We can then use that unified deny mode to do a simple
check to see whether there are any conflicts without needing to walk the
entire stateid list.
The only time we'll need to walk the entire list of stateids is when a
stateid that has a deny mode on it is being released, or one is having
its deny mode downgraded. In that case, we must walk the entire list and
recalculate the fi_share_deny field. Since deny modes are pretty rare
today, this should be very rare under normal workloads.
To address the potential for races once the client_mutex is removed,
protect fi_share_deny with the fi_lock. In nfs4_get_vfs_file, check to
make sure that any deny mode we want to apply won't conflict with
existing access. If that's ok, then have nfs4_file_get_access check that
new access to the file won't conflict with existing deny modes.
If that also passes, then get file access references, set the correct
access and deny bits in the stateid, and update the fi_share_deny field.
If opening the file or truncating it fails, then unwind the whole mess
and return the appropriate error.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Once we remove the client_mutex, there's an unlikely but possible race
that could occur. It will be possible for nfs4_file_put_access to race
with nfs4_file_get_access. The refcount will go to zero (briefly) and
then bumped back to one. If that happens we set ourselves up for a
use-after-free and the potential for a lock to race onto the i_flock
list as a filp is being torn down.
Ensure that we can safely bump the refcount on the file by holding the
fi_lock whenever that's done. The only place it currently isn't is in
get_lock_access.
In order to ensure atomicity with finding the file, use the
find_*_file_locked variants and then call get_lock_access to get new
access references on the nfs4_file under the same lock.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Fix the "deny" argument type, and start the loop at 1. The 0 iteration
is always a noop.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Cleanup -- ensure that the stateid bits are set at the same time that
the file access refcounts are incremented. Keeping them coherent like
this makes it easier to ensure that we account for all of the
references.
Since the initialization of the st_*_bmap fields is done when it's
hashed, we go ahead and hash the stateid before getting access to the
file and unhash it if that function returns error. This will be
necessary anyway in a follow-on patch that will overhaul deny mode
handling.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We never use anything above bit #3, so an unsigned long for each is
wasteful. Shrink them to a char each, and add some WARN_ON_ONCE calls if
we try to set or clear bits that would go outside those sizes.
Note too that because atomic bitops work on unsigned longs, we have to
abandon their use here. That shouldn't be a problem though since we
don't really care about the atomicity in this code anyway. Using them
was just a convenient way to flip bits.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
...and replace it with a simple swap call.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Have them take NFS4_SHARE_ACCESS_* flags instead of an open mode. This
spares the callers from having to convert it themselves.
This also allows us to simplify these functions as we no longer need
to do the access_to_omode conversion in either one.
Note too that this patch eliminates the WARN_ON in
__nfs4_file_get_access. It's valid for now, but in a later patch we'll
be bumping the refcounts prior to opening the file in order to close
some races, at which point we'll need to remove it anyway.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Use filp_close instead of open coding. filp_close does a bit more than
just release the locks and put the filp. It also calls ->flush and
dnotify_flush, both of which should be done here anyway.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Preparation for removal of the client_mutex, which currently protects
this array. While we don't actually need the find_*_file_locked variants
just yet, a later patch will. So go ahead and add them now to reduce
future churn in this code.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Access to this list is currently serialized by the client_mutex. Add
finer grained locking around this list in preparation for its removal.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
No need to take the lock unless the count goes to 0.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Bruce says:
There's also a preexisting expire_client/laundromat vs break race:
- expire_client/laundromat adds a delegation to its local
reaplist using the same dl_recall_lru field that a delegation
uses to track its position on the recall lru and drops the
state lock.
- a concurrent break_lease adds the delegation to the lru.
- expire/client/laundromat then walks it reaplist and sees the
lru head as just another delegation on the list....
Fix this race by checking the dl_time under the state_lock. If we find
that it's not 0, then we know that it has already been queued to the LRU
list and that we shouldn't queue it again.
In the case of destroy_client, we must also ensure that we don't hit
similar races by ensuring that we don't move any delegations to the
reaplist with a dl_time of 0. Just bump the dl_time by one before we
drop the state_lock. We're destroying the delegations anyway, so a 1s
difference there won't matter.
The fault injection code also requires a bit of surgery here:
First, in the case of nfsd_forget_client_delegations, we must prevent
the same sort of race vs. the delegation break callback. For that, we
just increment the dl_time to ensure that a delegation callback can't
race in while we're working on it.
We can't do that for nfsd_recall_client_delegations, as we need to have
it actually queue the delegation, and that won't happen if we increment
the dl_time. The state lock is held over that function, so we don't need
to worry about these sorts of races there.
There is one other potential bug nfsd_recall_client_delegations though.
Entries on the victims list are not dequeued before calling
nfsd_break_one_deleg. That's a potential list corruptor, so ensure that
we do that there.
Reported-by: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Commit 8c7424cff6 (nfsd4: don't try to encode conflicting owner if low on space)
forgot free conf->data in nfsd4_encode_lockt and before sign conf->data to NULL
in nfsd4_encode_lock_denied.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
lookup_clientid is preferable to find_confirmed_client since it's able
to use the cached client in the compound state.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In later patches, we'll be moving the stateowner table into the
nfs4_client, and by doing this we ensure that we have a cached
nfs4_client pointer.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
...and have alloc_init_open_stateowner just use the cstate->clp pointer
instead of passing in a clp separately. This allows us to use the
cached nfs4_client pointer in the cstate instead of having to look it
up again.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We want to use the nfsd4_compound_state to cache the nfs4_client in
order to optimise away extra lookups of the clid.
In the v4.0 case, we use this to ensure that we only have to look up the
client at most once per compound for each call into lookup_clientid. For
v4.1+ we set the pointer in the cstate during SEQUENCE processing so we
should never need to do a search for it.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
I saw this pop up with some pynfs testing:
[ 123.609992] nfsd: non-standard errno: -7
...and -7 is -E2BIG. I think what happened is that XFS returned -E2BIG
due to some xattr operations with the ACL10 pynfs TEST (I guess it has
limited xattr size?).
Add a better mapping for that error since it's possible that we'll need
it. How about we convert it to NFSERR_FBIG? As Bruce points out, they
both have "BIG" in the name so it must be good.
Also, turn the printk in this function into a WARN() so that we can get
a bit more information about situations that don't have proper mappings.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Commit 2a7420c03e504 (nfsd: Ensure that nfsd_create_setattr commits
files to stable storage), added a couple of calls to commit_metadata,
but doesn't convert their return codes to __be32 in the appropriate
places.
Cc: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The cstate already holds information about the session, and hence
the client id, so it makes more sense to pass that information
rather than the current practice of passing a 'minor version' number.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If the client were to disappear from underneath us while we're holding
a session reference, things would be bad. This cleanup helps ensure
that it cannot, which will be a possibility when the client_mutex is
removed.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Now that we know that we won't have several lockowners with the same,
owner->data, we can simplify nfsd4_release_lockowner and get rid of
the lo_list in the process.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Just like open-owners, lock-owners are associated with a name, a clientid
and, in the case of minor version 0, a sequence id. There is no association
to a file.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
A lockowner can have more than one lock stateid. For instance, if a
process has more than one file open and has locks on both, then the same
lockowner has more than one stateid associated with it. Change it so
that this reality is better reflected by the objects that nfsd uses.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In the NFSv4 spec, lock stateids are per-file objects. Lockowners are not.
This patch replaces the current list of lock owners in the open stateids
with a list of lock stateids.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Minor cleanup that should introduce no behavioral changes.
Currently this function just unhashes the stateid and leaves the caller
to do the work of the CLOSE processing.
Change nfsd4_close_open_stateid so that it handles doing all of the work
of closing a stateid. Move the handling of the unhashed stateid into it
instead of doing that work in nfsd4_close. This will help isolate some
coming changes to stateid handling from nfsd4_close.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
There's no need to confirm an openowner in v4.1 and above, so we can
go ahead and set NFS4_OO_CONFIRMED when we create openowners in
those versions. This will also be necessary when we remove the
client_mutex, as it'll be possible for two concurrent opens to race
in versions >4.0.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Move the slot return, put session etc into a helper in fs/nfsd/nfs4state.c
instead of open coding in nfs4svc_encode_compoundres.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Not technically a bugfix, since nothing tries to use the return pointer
if this function doesn't return success, but it could be a problem
with some coming changes.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently, the maximum number of connections that nfsd will allow
is based on the number of threads spawned. While this is fine for a
default, there really isn't a clear relationship between the two.
The number of threads corresponds to the number of concurrent requests
that we want to allow the server to process at any given time. The
connection limit corresponds to the maximum number of clients that we
want to allow the server to handle. These are two entirely different
quantities.
Break the dependency on increasing threads in order to allow for more
connections, by adding a new per-net parameter that can be set to a
non-zero value. The default is still to base it on the number of threads,
so there should be no behavior change for anyone who doesn't use it.
Cc: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Since nfsd_create_setattr strips the mode from the struct iattr, it
is quite possible that it will optimise away the call to nfsd_setattr
altogether.
If this is the case, then we never call commit_metadata() on the
newly created file.
Also ensure that both nfsd_setattr() and nfsd_create_setattr() fail
when the call to commit_metadata fails.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Commit db2e747b14 (vfs: remove mode parameter from vfs_symlink())
have remove mode parameter from vfs_symlink.
So that, iattr isn't needed by nfsd_symlink now, just remove it.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Current code depends on the client_mutex to guarantee a single struct
nfs4_file per inode in the file_hashtbl and make addition atomic with
respect to lookup. Rely instead on the state_Lock, to make it easier to
stop taking the client_mutex here later.
To prevent an i_lock/state_lock inversion, change nfsd4_init_file to
use ihold instead if igrab. That's also more efficient anyway as we
definitely hold a reference to the inode at that point.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
nfsd4_process_open2 will currently will get access to the file, and then
call nfsd4_truncate to (possibly) truncate it. If that operation fails
though, then the access references will never be released as the
nfs4_ol_stateid is never initialized.
Fix by moving the nfsd4_truncate call into nfs4_get_vfs_file, ensuring
that the refcounts are properly put if the truncate fails.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
fs/nfsd/nfs4xdr.c: In function 'nfsd4_encode_readv':
>> fs/nfsd/nfs4xdr.c:3137:148: warning: comparison of distinct pointer types lacks a cast [enabled by default]
thislen = min(len, ((void *)xdr->end - (void *)xdr->p));
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Avoid an extra allocation for the tmpbuf struct itself, and stop
ignoring some allocation failures.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This is a not-that-useful kmalloc wrapper. And I'd like one of the
callers to actually use something other than kmalloc.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
28e05dd845 "knfsd: nfsd4: represent nfsv4 acl with array instead of
linked list" removed the last user that wanted a custom free function.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The name of a link is currently stored in cr_name and cr_namelen, and
the content in cr_linkname and cr_linklen. That's confusing.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently nfsd_symlink has a weird hack to serve callers who don't
null-terminate symlink data: it looks ahead at the next byte to see if
it's zero, and copies it to a new buffer to null-terminate if not.
That means callers don't have to null-terminate, but they *do* have to
ensure that the byte following the end of the data is theirs to read.
That's a bit subtle, and the NFSv4 code actually got this wrong.
So let's just throw out that code and let callers pass null-terminated
strings; we've already fixed them to do that.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
It's simple enough for NFSv2 to null-terminate the symlink data.
A bit weird (it depends on knowing that we've already read the following
byte, which is either padding or part of the mode), but no worse than
the conditional kstrdup it otherwise relies on in nfsd_symlink().
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
An NFS operation that creates a new symlink includes the symlink data,
which is xdr-encoded as a length followed by the data plus 0 to 3 bytes
of zero-padding as required to reach a 4-byte boundary.
The vfs, on the other hand, wants null-terminated data.
The simple way to handle this would be by copying the data into a newly
allocated buffer with space for the final null.
The current nfsd_symlink code tries to be more clever by skipping that
step in the (likely) case where the byte following the string is already
0.
But that assumes that the byte following the string is ours to look at.
In fact, it might be the first byte of a page that we can't read, or of
some object that another task might modify.
Worse, the NFSv4 code tries to fix the problem by actually writing to
that byte.
In the NFSv2/v3 cases this actually appears to be safe:
- nfs3svc_decode_symlinkargs explicitly null-terminates the data
(after first checking its length and copying it to a new
page).
- NFSv2 limits symlinks to 1k. The buffer holding the rpc
request is always at least a page, and the link data (and
previous fields) have maximum lengths that prevent the request
from reaching the end of a page.
In the NFSv4 case the CREATE op is potentially just one part of a long
compound so can end up on the end of a page if you're unlucky.
The minimal fix here is to copy and null-terminate in the NFSv4 case.
The nfsd_symlink() interface here seems too fragile, though. It should
really either do the copy itself every time or just require a
null-terminated string.
Reported-by: Jeff Layton <jlayton@primarydata.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Introduced by commit 561f0ed498 (nfsd4: allow large readdirs).
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
XDR requires 4-byte alignment; nfs4d READLINK reply writes out the padding,
but truncates the packet to the padding-less size.
Fix by taking the padding into consideration when truncating the packet.
Symptoms:
# ll /mnt/
ls: cannot read symbolic link /mnt/test: Input/output error
total 4
-rw-r--r--. 1 root root 0 Jun 14 01:21 123456
lrwxrwxrwx. 1 root root 6 Jul 2 03:33 test
drwxr-xr-x. 1 root root 0 Jul 2 23:50 tmp
drwxr-xr-x. 1 root root 60 Jul 2 23:44 tree
Signed-off-by: Avi Kivity <avi@cloudius-systems.com>
Fixes: 476a7b1f4b (nfsd4: don't treat readlink like a zero-copy operation)
Reviewed-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
An NFS operation that creates a new symlink includes the symlink data,
which is xdr-encoded as a length followed by the data plus 0 to 3 bytes
of zero-padding as required to reach a 4-byte boundary.
The vfs, on the other hand, wants null-terminated data.
The simple way to handle this would be by copying the data into a newly
allocated buffer with space for the final null.
The current nfsd_symlink code tries to be more clever by skipping that
step in the (likely) case where the byte following the string is already
0.
But that assumes that the byte following the string is ours to look at.
In fact, it might be the first byte of a page that we can't read, or of
some object that another task might modify.
Worse, the NFSv4 code tries to fix the problem by actually writing to
that byte.
In the NFSv2/v3 cases this actually appears to be safe:
- nfs3svc_decode_symlinkargs explicitly null-terminates the data
(after first checking its length and copying it to a new
page).
- NFSv2 limits symlinks to 1k. The buffer holding the rpc
request is always at least a page, and the link data (and
previous fields) have maximum lengths that prevent the request
from reaching the end of a page.
In the NFSv4 case the CREATE op is potentially just one part of a long
compound so can end up on the end of a page if you're unlucky.
The minimal fix here is to copy and null-terminate in the NFSv4 case.
The nfsd_symlink() interface here seems too fragile, though. It should
really either do the copy itself every time or just require a
null-terminated string.
Reported-by: Jeff Layton <jlayton@primarydata.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently rpc_pton() fails to handle the case where you echo an address
into the file, as it barfs on the newline. Ensure that we NULL out the
first occurrence of any newline.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
AFAICT, the only way to hit this error is to pass this function a bogus
"who" value. In that case, we probably don't want to return -1 as that
could get sent back to the client. Turn this into nfserr_serverfault,
which is a more appropriate error for a server bug like this.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The filehandle structs all use host-endian values, but will sometimes
stuff big-endian values into those fields. This is OK since these
values are opaque to the client, but it confuses sparse. Add __force to
make it clear that we are doing this intentionally.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The callers expect a __be32 return and the functions they call return
__be32, so having these return int is just wrong. Also, nfsd_finish_read
can be made static.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We currently hash the XID to determine a hash bucket to use for the
reply cache entry, which is fed into hash_32 without byte-swapping it.
Add __force to make sparse happy, and add some comments to explain
why.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
sparse complains that we're stuffing non-byte-swapped values into
__be32's here. Since they're supposed to be opaque, it doesn't matter
much. Just add __force to make sparse happy.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Don't using cache_get besides export.h, using exp_get for export.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
rq_usedeferral and rq_splice_ok are used as 0 and 1, just defined to bool.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Commit 561f0ed498 (nfsd4: allow large readdirs) introduces a bug
about readdir the root of pseudofs.
Call xdr_truncate_encode() revert encoded name when skipping.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If nfsd needs to recall a delegation for some reason it implies that there is
contention on the file, so further delegations should not be handed out.
The current code fails to do so, and the result is effectively a
live-lock under some workloads: a client attempting a conflicting
operation on a read-delegated file receives NFS4ERR_DELAY and retries
the operation, but by the time it retries the server may already have
given out another delegation.
We could simply avoid delegations for (say) 30 seconds after any recall, but
this is probably too heavy handed.
We could keep a list of inodes (or inode numbers or filehandles) for recalled
delegations, but that requires memory allocation and searching.
The approach taken here is to use a bloom filter to record the filehandles
which are currently blocked from delegation, and to accept the cost of a few
false positives.
We have 2 bloom filters, each of which is valid for 30 seconds. When a
delegation is recalled the filehandle is added to one filter and will remain
disabled for between 30 and 60 seconds.
We keep a count of the number of filehandles that have been added, so when
that count is zero we can bypass all other tests.
The bloom filters have 256 bits and 3 hash functions. This should allow a
couple of dozen blocked filehandles with minimal false positives. If many
more filehandles are all blocked at once, behaviour will degrade towards
rejecting all delegations for between 30 and 60 seconds, then resetting and
allowing new delegations.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
27b11428b7 ("nfsd4: remove lockowner when removing lock stateid")
introduced a memory leak.
Cc: stable@vger.kernel.org
Reported-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently, the DRC cache pruner will stop scanning the list when it
hits an entry that is RC_INPROG. It's possible however for a call to
take a *very* long time. In that case, we don't want it to block other
entries from being pruned if they are expired or we need to trim the
cache to get back under the limit.
Fix the DRC cache pruner to just ignore RC_INPROG entries.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
While we're here, let's kill off a couple of the read-side macros.
Leaving the more complicated ones alone for now.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The rpc code makes available to the NFS server an array of pages to
encod into. The server represents its reply as an xdr buf, with the
head pointing into the first page in that array, the pages ** array
starting just after that, and the tail (if any) sharing any leftover
space in the page used by the head.
While encoding, we use xdr_stream->page_ptr to keep track of which page
we're currently using.
Currently we set xdr_stream->page_ptr to buf->pages, which makes the
head a weird exception to the rule that page_ptr always points to the
page we're currently encoding into. So, instead set it to buf->pages -
1 (the page actually containing the head), and remove the need for a
little unintuitive logic in xdr_get_next_encode_buffer() and
xdr_truncate_encode.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We don't want the stateid to be found in the hash table before the delegation
is granted.
Currently this is protected by the client_mutex, but we want to break that
up and this is a necessary step toward that goal.
Signed-off-by: Benny Halevy <bhalevy@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
...as the name is a bit more descriptive and we've started using it for
other purposes.
Signed-off-by: Benny Halevy <bhalevy@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The memset of resp in svc_process_common should ensure that these are
already zeroed by the time they get here.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In the NFS4_OPEN_CLAIM_PREVIOUS case, we should only mark it confirmed
if the nfs4_check_open_reclaim check succeeds.
In the NFS4_OPEN_CLAIM_DELEG_PREV_FH and NFS4_OPEN_CLAIM_DELEGATE_PREV
cases, I see no point in declaring the openowner confirmed when the
operation is going to fail anyway, and doing so might allow the client
to game things such that it wouldn't need to confirm a subsequent open
with the same owner.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This fixes a bug in the handling of the fi_delegations list.
nfs4_setlease does not hold the recall_lock when adding to it. The
client_mutex is held, which prevents against concurrent list changes,
but nfsd_break_deleg_cb does not hold while walking it. New delegations
could theoretically creep onto the list while we're walking it there.
Signed-off-by: Benny Halevy <bhalevy@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The laundromat uses two variables to calculate when it should next run,
but one is completely ignored at the end of the run. Merge the two and
rename the variable to be more descriptive of what it does.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
sparse says:
CHECK fs/nfsd/nfs4xdr.c
fs/nfsd/nfs4xdr.c:2043:1: warning: symbol 'nfsd4_encode_fattr' was not declared. Should it be static?
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
When debugging, rpc prints messages from dprintk(KERN_WARNING ...)
with "^A4" prefixed,
[ 2780.339988] ^A4nfsd: connect from unprivileged port: 127.0.0.1, port=35316
Trond tells,
> dprintk != printk. We have NEVER supported dprintk(KERN_WARNING...)
This patch removes using of dprintk with KERN_WARNING.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Note nobody's ever noticed because the typical client probably never
requests FILES_AVAIL without also requesting something else on the list.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
ex_nflavors can't be negative number, just defined by uint32_t.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
No need for a typedef wrapper for svc_export or svc_client, remove them.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Commit 49b28684fd ("nfsd: Remove deprecated nfsctl system call and
related code") removed the only use of ipv6_addr_set_v4mapped(), so
net/ipv6.h is unneeded now.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Commit 8f6c5ffc89 ("kernel/groups.c: remove return value of
set_groups") removed the last use of "ret".
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
After commit 4c1e1b34d5 ("nfsd: Store ex_anon_uid and ex_anon_gid as
kuids and kgids") using kuid/kgid for ex_anon_uid/ex_anon_gid,
user_namespace.h is not needed.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If fsloc_parse() failed at kzalloc(), fs/nfsd/export.c
411
412 fsloc->locations = kzalloc(fsloc->locations_count
413 * sizeof(struct nfsd4_fs_location), GFP_KERNEL);
414 if (!fsloc->locations)
415 return -ENOMEM;
svc_export_parse() will call nfsd4_fslocs_free() with fsloc->locations = NULL,
so that, "kfree(fsloc->locations[i].path);" will cause a crash.
If fsloc_parse() failed after that, fsloc_parse() will call nfsd4_fslocs_free(),
and svc_export_parse() will call it again, so that, a double free is caused.
This patch checks the fsloc->locations, and set to NULL after it be freed.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
RPC_MAX_AUTH_SIZE is scattered around several places. Better to set it
once in the auth code, where this kind of estimate should be made. And
while we're at it we can leave it zero when we're not using krb5i or
krb5p.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
And switch a couple other functions from the encode(&p,...) convention
to the p = encode(p,...) convention mostly used elsewhere.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
encode_getattr, for example, can return nfserr_resource to indicate it
ran out of buffer space. That's not a legal error in the 4.1 case.
And in the 4.1 case, if we ran out of buffer space, we should have
exceeded a session limit too.
(Note in 1bc49d83c3 "nfsd4: fix
nfs4err_resource in 4.1 case" we originally tried fixing this error
return before fixing the problem that we could error out while we still
had lots of available space. The result was to trade one illegal error
for another in those cases. We decided that was helpful, so reverted
the change in fc208d026b, and are only
reinstating it now that we've elimited almost all of those cases.)
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
I'm not sure why a client would want to stuff multiple reads in a
single compound rpc, but it's legal for them to do it, and we should
really support it.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The splice and readv cases are actually quite different--for example the
former case ignores the array of vectors we build up for the latter.
It is probably clearer to separate the two cases entirely.
There's some code duplication between the split out encoders, but this
is only temporary and will be fixed by a later patch.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We currently allow only one read per compound, with operations before
and after whose responses will require no more than about a page to
encode.
While we don't expect clients to violate those limits any time soon,
this limitation isn't really condoned by the spec, so to future proof
the server we should lift the limitation.
At the same time we'd like to continue to support zero-copy reads.
Supporting multiple zero-copy-reads per compound would require a new
data structure to replace struct xdr_buf, which can represent only one
set of included pages.
So for now we plan to modify encode_read() to support either zero-copy
or non-zero-copy reads, and use some heuristics at the start of the
compound processing to decide whether a zero-copy read will work.
This will allow us to support more exotic compounds without introducing
a performance regression in the normal case.
Later patches handle those "exotic compounds", this one just makes sure
zero-copy is turned off in those cases.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We plan to use this estimate to decide whether or not to allow zero-copy
reads. Currently we're assuming all getattr's are a page, which can be
both too small (ACLs e.g. may be arbitrarily long) and too large (after
an upcoming read patch this will unnecessarily prevent zero copy reads
in any read compound also containing a getattr).
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
There's no advantage to this zero-copy-style readlink encoding, and it
unnecessarily limits the kinds of compounds we can handle. (In practice
I can't see why a client would want e.g. multiple readlink calls in a
comound, but it's probably a spec violation for us not to handle it.)
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
As long as we're here, let's enforce the protocol's limit on the number
of directory entries to return in a readdir.
I don't think anyone's ever noticed our lack of enforcement, but maybe
there's more of a chance they will now that we allow larger readdirs.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently we limit readdir results to a single page. This can result in
a performance regression compared to NFSv3 when reading large
directories.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Once we know the limits the session places on the size of the rpc, we
can also use that information to release any unnecessary reserved reply
buffer space.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We can simplify session limit enforcement by restricting the xdr buflen
to the session size.
Also fix a preexisting bug: we should really have been taking into
account the auth-required space when comparing against session limits,
which are limits on the size of the entire rpc reply, including any krb5
overhead.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We don't necessarily want to assume that the buflen is the same
as the number of bytes available in the pages. We may have some reason
to set it to something less (for example, later patches will use a
smaller buflen to enforce session limits).
So, calculate the buflen relative to the previous buflen instead of
recalculating it from scratch.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
It will turn out to be useful to have a more accurate estimate of reply
size; so, piggyback on the existing op reply-size estimators.
Also move nfsd4_max_reply to nfs4proc.c to get easier access to struct
nfsd4_operation and friends. (Thanks to Christoph Hellwig for pointing
out that simplification.)
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
I ran into this corner case in testing: in theory clients can provide
state owners up to 1024 bytes long. In the sessions case there might be
a risk of this pushing us over the DRC slot size.
The conflicting owner isn't really that important, so let's humor a
client that provides a small maxresponsize_cached by allowing ourselves
to return without the conflicting owner instead of outright failing the
operation.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Limits on maxresp_sz mean that we only ever need to replay rpc's that
are contained entirely in the head.
The one exception is very small zero-copy reads. That's an odd corner
case as clients wouldn't normally ask those to be cached.
in any case, this seems a little more robust.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
After this we can handle for example getattr of very large ACLs.
Read, readdir, readlink are still special cases with their own limits.
Also we can't handle a new operation starting close to the end of a
page.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Now that all op encoders can handle running out of space, we no longer
need to check the remaining size for every operation; only nonidempotent
operations need that check, and that can be done by
nfsd4_check_resp_size.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Once we've included page-cache pages in the encoding it's difficult to
remove them and restart encoding. (xdr_truncate_encode doesn't handle
that case.) So, make sure we'll have adequate space to finish the
operation first.
For now COMPOUND_SLACK_SPACE checks should prevent this case happening,
but we want to remove those checks.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We've tried to prevent running out of space with COMPOUND_SLACK_SPACE
and special checking in those operations (getattr) whose result can vary
enormously.
However:
- COMPOUND_SLACK_SPACE may be difficult to maintain as we add
more protocol.
- BUG_ON or page faulting on failure seems overly fragile.
- Especially in the 4.1 case, we prefer not to fail compounds
just because the returned result came *close* to session
limits. (Though perfect enforcement here may be difficult.)
- I'd prefer encoding to be uniform for all encoders instead of
having special exceptions for encoders containing, for
example, attributes.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Normally xdr encoding proceeds in a single pass from start of a buffer
to end, but sometimes we have to write a few bytes to an earlier
position.
Use write_bytes_to_xdr_buf for these cases rather than saving a pointer
to write to. We plan to rewrite xdr_reserve_space to handle encoding
across page boundaries using a scratch buffer, and don't want to risk
writing to a pointer that was contained in a scratch buffer.
Also it will no longer be safe to calculate lengths by subtracting two
pointers, so use xdr_buf offsets instead.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
xdr_reserve_space should now be calculating the length correctly as we
go, so there's no longer any need to fix it up here.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This is a cosmetic change for now; no change in behavior.
Note we're just depending on xdr_reserve_space to do the bounds checking
for us, we're not really depending on its adjustment of iovec or xdr_buf
lengths yet, as those are fixed up by as necessary after the fact by
read-link operations and by nfs4svc_encode_compoundres. However we do
have to update xdr->iov on read-like operations to prevent
xdr_reserve_space from messing with the already-fixed-up length of the
the head.
When the attribute encoding fails partway through we have to undo the
length adjustments made so far. We do it manually for now, but later
patches will add an xdr_truncate_encode() helper to handle cases like
this.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This post-encoding check should be taking into account the need to
encode at least an out-of-space error to the following op (if any).
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If nfsd4_check_resp_size() returns an error then we should really be
truncating the reply here, otherwise we may leave extra garbage at the
end of the rpc reply.
Also add a warning to catch any cases where our reply-size estimates may
be wrong in the case of a non-idempotent operation.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently if the nfs-level part of a reply would be too large, we'll
return an error to the client. But if the nfs-level part fits and
leaves no room for krb5p or krb5i stuff, then we just drop the request
entirely.
That's no good. Instead, reserve some slack space at the end of the
buffer and make sure we fail outright if we'd come close.
The slack space here is a massive overstimate of what's required, we
should probably try for a tighter limit at some point.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Just change the nfsd4_encode_getattr api. Not changing any code or
adding any new functionality yet.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This is a mechanical transformation with no change in behavior.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently a non-idempotent op reply may be cached if it fails in the
proc code but not if it fails at xdr decoding. I doubt there are any
xdr-decoding-time errors that would make this a problem in practice, so
this probably isn't a serious bug.
The space estimates should also take into account space required for
encoding of error returns. Again, not a practical problem, though it
would become one after future patches which will tighten the space
estimates.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The client is actually asking for 2532 bytes. I suspect that's a
mistake. But maybe we can allow some more. In theory lock needs more
if it might return a maximum-length lockowner in the denied case.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
OP_MODIFIES_SOMETHING flags operations that we should be careful not to
initiate without being sure we have the buffer space to encode a reply.
None of these ops fall into that category.
We could probably remove a few more, but this isn't a very important
problem at least for ops whose reply size is easy to estimate.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
PF_LESS_THROTTLE has a very specific use case: to avoid deadlocks
and live-locks while writing to the page cache in a loop-back
NFS mount situation.
It therefore makes sense to *only* set PF_LESS_THROTTLE in this
situation.
We now know when a request came from the local-host so it could be a
loop-back mount. We already know when we are handling write requests,
and when we are doing anything else.
So combine those two to allow nfsd to still be throttled (like any
other process) in every situation except when it is known to be
problematic.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
No need for a kmem_cache_destroy wrapper in nfsd, just do proper
goto based unwinding.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Assignments should not happen inside an if conditional, but in the line
before. This issue was reported by checkpatch.
The semantic patch that makes this change is as follows
(http://coccinelle.lip6.fr/):
// <smpl>
@@
identifier i1;
expression e1;
statement S;
@@
-if(!(i1 = e1)) S
+i1 = e1;
+if(!i1)
+S
// </smpl>
It has been tested by compilation.
Signed-off-by: Benoit Taine <benoit.taine@lip6.fr>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We're not cleaning up everything we need to on error. In particular,
we're not removing our lease. Among other problems this can cause the
struct nfs4_file used as fl_owner to be referenced after it has been
destroyed.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We're clearing the SUID/SGID bits on write by hand in nfsd_vfs_write,
even though the subsequent vfs_writev() call will end up doing this for
us (through file system write methods eventually calling
file_remove_suid(), e.g., from __generic_file_aio_write).
So, remove the redundant nfsd code.
The only change in behavior is when the write is by root, in which case
we previously cleared SUID/SGID, but will now leave it alone. The new
behavior is the behavior of every filesystem we've checked.
It seems better to be consistent with local filesystem behavior. And
the security advantage seems limited as root could always restore these
bits by hand if it wanted.
SUID/SGID is not cleared after writing data with (root, local ext4),
File: ‘test’
Size: 0 Blocks: 0 IO Block: 4096 regular
empty file
Device: 803h/2051d Inode: 1200137 Links: 1
Access: (4777/-rwsrwxrwx) Uid: ( 0/ root) Gid: ( 0/ root)
Context: unconfined_u:object_r:admin_home_t:s0
Access: 2014-04-18 21:36:31.016029014 +0800
Modify: 2014-04-18 21:36:31.016029014 +0800
Change: 2014-04-18 21:36:31.026030285 +0800
Birth: -
File: ‘test’
Size: 5 Blocks: 8 IO Block: 4096 regular file
Device: 803h/2051d Inode: 1200137 Links: 1
Access: (4777/-rwsrwxrwx) Uid: ( 0/ root) Gid: ( 0/ root)
Context: unconfined_u:object_r:admin_home_t:s0
Access: 2014-04-18 21:36:31.016029014 +0800
Modify: 2014-04-18 21:36:31.040032065 +0800
Change: 2014-04-18 21:36:31.040032065 +0800
Birth: -
With no_root_squash, (root, remote ext4), SUID/SGID are cleared,
File: ‘test’
Size: 0 Blocks: 0 IO Block: 262144 regular
empty file
Device: 24h/36d Inode: 786439 Links: 1
Access: (4777/-rwsrwxrwx) Uid: ( 1000/ test) Gid: ( 1000/ test)
Context: system_u:object_r:nfs_t:s0
Access: 2014-04-18 21:45:32.155805097 +0800
Modify: 2014-04-18 21:45:32.155805097 +0800
Change: 2014-04-18 21:45:32.168806749 +0800
Birth: -
File: ‘test’
Size: 5 Blocks: 8 IO Block: 262144 regular file
Device: 24h/36d Inode: 786439 Links: 1
Access: (0777/-rwxrwxrwx) Uid: ( 1000/ test) Gid: ( 1000/ test)
Context: system_u:object_r:nfs_t:s0
Access: 2014-04-18 21:45:32.155805097 +0800
Modify: 2014-04-18 21:45:32.184808783 +0800
Change: 2014-04-18 21:45:32.184808783 +0800
Birth: -
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The current code assumes a one-to-one lockowner<->lock stateid
correspondance.
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The nfsv4 state code has always assumed a one-to-one correspondance
between lock stateid's and lockowners even if it appears not to in some
places.
We may actually change that, but for now when FREE_STATEID releases a
lock stateid it also needs to release the parent lockowner.
Symptoms were a subsequent LOCK crashing in find_lockowner_str when it
calls same_lockowner_ino on a lockowner that unexpectedly has an empty
so_stateids list.
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
As of 06f9cc12ca "nfsd4: don't create
unnecessary mask acl", any non-trivial ACL will be left with an
unitialized entry, and a trivial ACL may write one entry beyond what's
allocated.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Use fh_fsid when reffering to the fsid part of the filehandle. The
variable length auth field envisioned in nfsfh wasn't ever implemented.
Also clean up some lose ends around this and document the file handle
format better.
Btw, why do we even export nfsfh.h to userspace? The file handle very
much is kernel private, and nothing in nfs-utils include the header
either.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
commit 4ac7249ea5 have remove all EXPORT_SYMBOL,
linux/export.h is not needed, just clean it.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Move the state locking and file descriptor reference out from the
callers and into nfs4_preprocess_stateid_op() itself.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
They do not need to be used outside fs/nfsd/nfs4state.c
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
There is almost nothing left it in, just merge it into the only file
that includes it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
There are no legitimate users outside of fs/nfsd, so move it there.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
There are no legitimate users outside of fs/nfsd, so move it there.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The only real user of this header is fs/nfsd/nfsfh.h, so merge the
two. Various lockѕ source files used it to indirectly get other
sunrpc or nfs headers, so fix those up.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
It is large, it is used in more than one place, and it is not performance
critical. Let gcc figure out whether it should be inlined...
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Mainly to ensure that we don't leave any hanging timers.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Aside from making it clearer what is non-trivial in create_client(), it
also fixes a bug whereby we can call free_client() before idr_init()
has been called.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Since we're still limiting attributes to a page, the result here is that
a large getattr result will return NFS4ERR_REP_TOO_BIG/TOO_BIG_TO_CACHE
instead of NFS4ERR_RESOURCE.
Both error returns are wrong, and the real bug here is the arbitrary
limit on getattr results, fixed by as-yet out-of-tree patches. But at a
minimum we can make life easier for clients by sticking to one broken
behavior in released kernels instead of two....
Trond says:
one immediate consequence of this patch will be that NFSv4.1
clients will now report EIO instead of EREMOTEIO if they hit the
problem. That may make debugging a little less obvious.
Another consequence will be that if we ever do try to add client
side handling of NFS4ERR_REP_TOO_BIG, then we now have to deal
with the “handle existing buggy server” syndrome.
Reported-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
...otherwise the logic in the timeout handling doesn't work correctly.
Spotted-by: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Pull nfsd updates from Bruce Fields:
"Highlights:
- server-side nfs/rdma fixes from Jeff Layton and Tom Tucker
- xdr fixes (a larger xdr rewrite has been posted but I decided it
would be better to queue it up for 3.16).
- miscellaneous fixes and cleanup from all over (thanks especially to
Kinglong Mee)"
* 'for-3.15' of git://linux-nfs.org/~bfields/linux: (36 commits)
nfsd4: don't create unnecessary mask acl
nfsd: revert v2 half of "nfsd: don't return high mode bits"
nfsd4: fix memory leak in nfsd4_encode_fattr()
nfsd: check passed socket's net matches NFSd superblock's one
SUNRPC: Clear xpt_bc_xprt if xs_setup_bc_tcp failed
NFSD/SUNRPC: Check rpc_xprt out of xs_setup_bc_tcp
SUNRPC: New helper for creating client with rpc_xprt
NFSD: Free backchannel xprt in bc_destroy
NFSD: Clear wcc data between compound ops
nfsd: Don't return NFS4ERR_STALE_STATEID for NFSv4.1+
nfsd4: fix nfs4err_resource in 4.1 case
nfsd4: fix setclientid encode size
nfsd4: remove redundant check from nfsd4_check_resp_size
nfsd4: use more generous NFS4_ACL_MAX
nfsd4: minor nfsd4_replay_cache_entry cleanup
nfsd4: nfsd4_replay_cache_entry should be static
nfsd4: update comments with obsolete function name
rpc: Allow xdr_buf_subsegment to operate in-place
NFSD: Using free_conn free connection
SUNRPC: fix memory leak of peer addresses in XPRT
...
Pull renameat2 system call from Miklos Szeredi:
"This adds a new syscall, renameat2(), which is the same as renameat()
but with a flags argument.
The purpose of extending rename is to add cross-rename, a symmetric
variant of rename, which exchanges the two files. This allows
interesting things, which were not possible before, for example
atomically replacing a directory tree with a symlink, etc... This
also allows overlayfs and friends to operate on whiteouts atomically.
Andy Lutomirski also suggested a "noreplace" flag, which disables the
overwriting behavior of rename.
These two flags, RENAME_EXCHANGE and RENAME_NOREPLACE are only
implemented for ext4 as an example and for testing"
* 'cross-rename' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ext4: add cross rename support
ext4: rename: split out helper functions
ext4: rename: move EMLINK check up
ext4: rename: create ext4_renament structure for local vars
vfs: add cross-rename
vfs: lock_two_nondirectories: allow directory args
security: add flags to rename hooks
vfs: add RENAME_NOREPLACE flag
vfs: add renameat2 syscall
vfs: rename: use common code for dir and non-dir
vfs: rename: move d_move() up
vfs: add d_is_dir()
Any setattr of the ACL attribute, even if it sets just the basic 3-ACE
ACL exactly as it was returned from a file with only mode bits, creates
a mask entry, and it is only the mask, not group, entry that is changed
by subsequent modifications of the mode bits.
So, for example, it's surprising that GROUP@ is left without read or
write permissions after a chmod 0666:
touch test
chmod 0600 test
nfs4_getfacl test
A::OWNER@:rwatTcCy
A::GROUP@:tcy
A::EVERYONE@:tcy
nfs4_getfacl test | nfs4_setfacl -S - test #
chmod 0666 test
nfs4_getfacl test
A::OWNER@:rwatTcCy
A::GROUP@:tcy
D::GROUP@:rwa
A::EVERYONE@:rwatcy
So, let's stop creating the unnecessary mask ACL.
A mask will still be created on non-trivial ACLs (ACLs with actual named
user and group ACEs), so the odd posix-acl behavior of chmod modifying
only the mask will still be left in that case; but that's consistent
with local behavior.
Reported-by: Soumya Koduri <skoduri@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This reverts the part of commit 6e14b46b91
that changes NFSv2 behavior.
Mark Lord found that it broke nfs-root for Linux clients, because it
broke NFSv2.
In fact, from RFC 1094:
"Notice that the file type is specified both in the mode bits
and in the file type. This is really a bug in the protocol and
will be fixed in future versions."
So NFSv2 clients really are expected to depend on the high bits of the
mode.
Cc: stable@kernel.org
Reported-by: Mark Lord <mlord@pobox.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
After commit 6307f8fee2 ("security: remove dead hook task_setgroups"),
set_groups will always return zero, so we could just remove return value
of set_groups.
This patch reduces code size, and simplfies code to use set_groups,
because we don't need to check its return value any more.
[akpm@linux-foundation.org: remove obsolete claims from set_groups() comment]
Signed-off-by: Wang YanQing <udknight@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add new renameat2 syscall, which is the same as renameat with an added
flags argument.
Pass flags to vfs_rename() and to i_op->rename() as well.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Reviewed-by: J. Bruce Fields <bfields@redhat.com>
fh_put() does not free the temporary file handle.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
There could be a case, when NFSd file system is mounted in network, different
to socket's one, like below:
"ip netns exec" creates new network and mount namespace, which duplicates NFSd
mount point, created in init_net context. And thus NFS server stop in nested
network context leads to RPCBIND client destruction in init_net.
Then, on NFSd start in nested network context, rpc.nfsd process creates socket
in nested net and passes it into "write_ports", which leads to RPCBIND sockets
creation in init_net context because of the same reason (NFSd monut point was
created in init_net context). An attempt to register passed socket in nested
net leads to panic, because no RPCBIND client present in nexted network
namespace.
This patch add check that passed socket's net matches NFSd superblock's one.
And returns -EINVAL error to user psace otherwise.
v2: Put socket on exit.
Reported-by: Weng Meiling <wengmeiling.weng@huawei.com>
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Besides checking rpc_xprt out of xs_setup_bc_tcp,
increase it's reference (it's important).
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Testing NFS4.0 by pynfs, I got some messeages as,
"nfsd: inode locked twice during operation."
When one compound RPC contains two or more ops that locks
the filehandle,the second op will cause the message.
As two SETATTR ops, after the first SETATTR, nfsd will not call
fh_put() to release current filehandle, it means filehandle have
unlocked with fh_post_saved = 1.
The second SETATTR find fh_post_saved = 1, and printk the message.
v2: introduce helper fh_clear_wcc().
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
RFC5661 obsoletes NFS4ERR_STALE_STATEID in favour of NFS4ERR_BAD_STATEID.
Note that because nfsd encodes the clientid boot time in the stateid, we
can hit this error case in certain scenarios where the Linux client
state management thread exits early, before it has finished recovering
all state.
Reported-by: Idan Kedar <idank@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
encode_getattr, for example, can return nfserr_resource to indicate it
ran out of buffer space. That's not a legal error in the 4.1 case. And
in the 4.1 case, if we ran out of buffer space, we should have exceeded
a session limit too.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
cstate->slot and ->session are each set together in nfsd4_sequence. If
one is non-NULL, so is the other.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
J. Bruce Fields
Jeff Layton
Jeff Layton
Julia Lawall
Christoph Hellwig
Linus Torvalds
Andrew Elble
Paul Gortmaker
Kinglong Mee
Andreas Gruenbacher
Jeff Layton
Fabian Frederick
Arnd Bergmann
NeilBrown
Sachin Bhamare
Giuseppe Cantavenera
Mark Salter
Iulia Manda
David Howells
Christoph Hellwig
Chengyu Song
Dan Carpenter
Rickard Strandqvist
Daniel Borkmann
Benjamin Coddington
Rasmus Villemoes
Al Viro
Trond Myklebust
Anna Schumaker
Miklos Szeredi
Chuck Lever
Zach Brown
James Morris
Benny Halevy
Kirill Tkhai
Dmitry Kasatkin
Rajesh Ghanekar
Ross Lagerwall
Himangi Saraogi
Avi Kivity
Benny Halevy
Benoit Taine
Jeff Layton
Wang YanQing
Miklos Szeredi
Yan, Zheng
Stanislav Kinsbursky