When assigning kvm irqfd we didn't check the irqchip mode but we allow
KVM_IRQFD to succeed with all the irqchip modes. However it does not
make much sense to create irqfd even without the kernel chips. Let's
provide a arch-dependent helper to check whether a specific irqfd is
allowed by the arch. At least for x86, it should make sense to check:
- when irqchip mode is NONE, all irqfds should be disallowed, and,
- when irqchip mode is SPLIT, irqfds that are with resamplefd should
be disallowed.
For either of the case, previously we'll silently ignore the irq or
the irq ack event if the irqchip mode is incorrect. However that can
cause misterious guest behaviors and it can be hard to triage. Let's
fail KVM_IRQFD even earlier to detect these incorrect configurations.
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Radim Krčmář <rkrcmar@redhat.com>
CC: Alex Williamson <alex.williamson@redhat.com>
CC: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
WARNING: CPU: 0 PID: 13554 at kvm/arch/x86/kvm//../../../virt/kvm/kvm_main.c:4183 kvm_resume+0x3c/0x40 [kvm]
CPU: 0 PID: 13554 Comm: step_after_susp Tainted: G OE 5.1.0-rc4+ #1
RIP: 0010:kvm_resume+0x3c/0x40 [kvm]
Call Trace:
syscore_resume+0x63/0x2d0
suspend_devices_and_enter+0x9d1/0xa40
pm_suspend+0x33a/0x3b0
state_store+0x82/0xf0
kobj_attr_store+0x12/0x20
sysfs_kf_write+0x4b/0x60
kernfs_fop_write+0x120/0x1a0
__vfs_write+0x1b/0x40
vfs_write+0xcd/0x1d0
ksys_write+0x5f/0xe0
__x64_sys_write+0x1a/0x20
do_syscall_64+0x6f/0x6c0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Commit ca84d1a24 (KVM: x86: Add clock sync request to hardware enable) mentioned
that "we always hold kvm_lock when hardware_enable is called. The one place that
doesn't need to worry about it is resume, as resuming a frozen CPU, the spinlock
won't be taken." However, commit 6706dae9 (virt/kvm: Replace spin_is_locked() with
lockdep) introduces a bug, it asserts when the lock is not held which is contrary
to the original goal.
This patch fixes it by WARN_ON when the lock is held.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.ibm.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Fixes: 6706dae9 ("virt/kvm: Replace spin_is_locked() with lockdep")
[Wrap with #ifdef CONFIG_LOCKDEP - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM has helpers to handle the condition codes of trapped aarch32
instructions. These are marked __hyp_text and used from HYP, but they
aren't built by the 'hyp' Makefile, which has all the runes to avoid ASAN
and KCOV instrumentation.
Move this code to a new hyp/aarch32.c to avoid a hyp-panic when starting
an aarch32 guest on a host built with the ASAN/KCOV debug options.
Fixes: 021234ef37 ("KVM: arm64: Make kvm_condition_valid32() accessible from EL2")
Fixes: 8cebe750c4 ("arm64: KVM: Make kvm_skip_instr32 available to HYP")
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
* POWER: support for direct access to the POWER9 XIVE interrupt controller,
memory and performance optimizations.
* x86: support for accessing memory not backed by struct page, fixes and refactoring
* Generic: dirty page tracking improvements
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJc3qV/AAoJEL/70l94x66Dn3QH/jX1Bn0P/RZAIt4w0SySklSg
PqxUKDyBQqB9vN9Qeb9jWXAKPH2CtM3+up/rz7oRnBWp7qA6vXcC/R/QJYAvzdXE
nklsR/oYCsflR1KdlVYuDvvPCPP2fLBU5zfN83OsaBQ8fNRkm3gN+N5XQ2SbXbLy
Mo9tybS4otY201UAC96e8N0ipwwyCRpDneQpLcl+F5nH3RBt63cVbs04O+70MXn7
eT4I+8K3+Go7LATzT8hglD21D/7uvE31qQb6yr5L33IfhU4GB51RZzBXTNaAdY8n
hT1rMrRkAMAFWYZPQDfoMadjWU3i5DIfstKjDxOr9oTfuOEp5Z+GvJwvVnUDg1I=
=D0+p
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"ARM:
- support for SVE and Pointer Authentication in guests
- PMU improvements
POWER:
- support for direct access to the POWER9 XIVE interrupt controller
- memory and performance optimizations
x86:
- support for accessing memory not backed by struct page
- fixes and refactoring
Generic:
- dirty page tracking improvements"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (155 commits)
kvm: fix compilation on aarch64
Revert "KVM: nVMX: Expose RDPMC-exiting only when guest supports PMU"
kvm: x86: Fix L1TF mitigation for shadow MMU
KVM: nVMX: Disable intercept for FS/GS base MSRs in vmcs02 when possible
KVM: PPC: Book3S: Remove useless checks in 'release' method of KVM device
KVM: PPC: Book3S HV: XIVE: Fix spelling mistake "acessing" -> "accessing"
KVM: PPC: Book3S HV: Make sure to load LPID for radix VCPUs
kvm: nVMX: Set nested_run_pending in vmx_set_nested_state after checks complete
tests: kvm: Add tests for KVM_SET_NESTED_STATE
KVM: nVMX: KVM_SET_NESTED_STATE - Tear down old EVMCS state before setting new state
tests: kvm: Add tests for KVM_CAP_MAX_VCPUS and KVM_CAP_MAX_CPU_ID
tests: kvm: Add tests to .gitignore
KVM: Introduce KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2
KVM: Fix kvm_clear_dirty_log_protect off-by-(minus-)one
KVM: Fix the bitmap range to copy during clear dirty
KVM: arm64: Fix ptrauth ID register masking logic
KVM: x86: use direct accessors for RIP and RSP
KVM: VMX: Use accessors for GPRs outside of dedicated caching logic
KVM: x86: Omit caching logic for always-available GPRs
kvm, x86: Properly check whether a pfn is an MMIO or not
...
Commit e45adf665a ("KVM: Introduce a new guest mapping API", 2019-01-31)
introduced a build failure on aarch64 defconfig:
$ make -j$(nproc) ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- O=out defconfig \
Image.gz
...
../arch/arm64/kvm/../../../virt/kvm/kvm_main.c:
In function '__kvm_map_gfn':
../arch/arm64/kvm/../../../virt/kvm/kvm_main.c:1763:9: error:
implicit declaration of function 'memremap'; did you mean 'memset_p'?
../arch/arm64/kvm/../../../virt/kvm/kvm_main.c:1763:46: error:
'MEMREMAP_WB' undeclared (first use in this function)
../arch/arm64/kvm/../../../virt/kvm/kvm_main.c:
In function 'kvm_vcpu_unmap':
../arch/arm64/kvm/../../../virt/kvm/kvm_main.c:1795:3: error:
implicit declaration of function 'memunmap'; did you mean 'vm_munmap'?
because these functions are declared in <linux/io.h> rather than <asm/io.h>,
and the former was being pulled in already on x86 but not on aarch64.
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- guest SVE support
- guest Pointer Authentication support
- Better discrimination of perf counters between host and guests
-----BEGIN PGP SIGNATURE-----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=fjph
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-for-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm updates for 5.2
- guest SVE support
- guest Pointer Authentication support
- Better discrimination of perf counters between host and guests
Conflicts:
include/uapi/linux/kvm.h
- Fix a bug, fix a spelling mistake, remove some useless code.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJc2kTEAAoJEJ2a6ncsY3GfS88IAImcIlKXMvzSKtHFxGpRap17
9LTZs5MQAUZHVMFJXmrJLBgogtGxUw53aX53woeyerytZsoGU4+YzwgLhk4XBEzA
5Kt5ahlxu82sa2ThH1zyLlNWFXiTECgD5ErNTdavLbNlaKE8YG160+65/mSyixGz
vs5wLSYGv/37no1ay6PIZ3DtwqdrYq5nJbuG+ZsaamUHPJOGprqHqg0gaTJ877NZ
yQDUS7OVuEJ1pdUUK/elP+cnlqR9smaP5OUNsXYMHWJgPJMjc27/thBJy93iS1kk
/zKQ8AFmxqoaePnR7ymTbqurfFFHBiSavUmyWopSQppNHCf4DDE8XjLs9MXKez8=
=Lco4
-----END PGP SIGNATURE-----
Merge tag 'kvm-ppc-next-5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into HEAD
PPC KVM update for 5.2
* Support for guests to access the new POWER9 XIVE interrupt controller
hardware directly, reducing interrupt latency and overhead for guests.
* In-kernel implementation of the H_PAGE_INIT hypercall.
* Reduce memory usage of sparsely-populated IOMMU tables.
* Several bug fixes.
Second PPC KVM update for 5.2
* Fix a bug, fix a spelling mistake, remove some useless code.
Use the mmu_notifier_range_blockable() helper function instead of directly
dereferencing the range->blockable field. This is done to make it easier
to change the mmu_notifier range field.
This patch is the outcome of the following coccinelle patch:
%<-------------------------------------------------------------------
@@
identifier I1, FN;
@@
FN(..., struct mmu_notifier_range *I1, ...) {
<...
-I1->blockable
+mmu_notifier_range_blockable(I1)
...>
}
------------------------------------------------------------------->%
spatch --in-place --sp-file blockable.spatch --dir .
Link: http://lkml.kernel.org/r/20190326164747.24405-3-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Ross Zwisler <zwisler@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krcmar <rkrcmar@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is no need to test for the device pointer validity when releasing
a KVM device. The file descriptor should identify it safely.
Fixes: 2bde9b3ec8 ("KVM: Introduce a 'release' method for KVM devices")
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
The previous KVM_CAP_MANUAL_DIRTY_LOG_PROTECT has some problem which
blocks the correct usage from userspace. Obsolete the old one and
introduce a new capability bit for it.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Just imaging the case where num_pages < BITS_PER_LONG, then the loop
will be skipped while it shouldn't.
Signed-off-by: Peter Xu <peterx@redhat.com>
Fixes: 2a31b9db15
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_dirty_bitmap_bytes() will return the size of the dirty bitmap of
the memslot rather than the size of bitmap passed over from the ioctl.
Here for KVM_CLEAR_DIRTY_LOG we should only copy exactly the size of
bitmap that covers kvm_clear_dirty_log.num_pages.
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 2a31b9db15
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Mostly just incremental improvements here:
- Introduce AT_HWCAP2 for advertising CPU features to userspace
- Expose SVE2 availability to userspace
- Support for "data cache clean to point of deep persistence" (DC PODP)
- Honour "mitigations=off" on the cmdline and advertise status via sysfs
- CPU timer erratum workaround (Neoverse-N1 #1188873)
- Introduce perf PMU driver for the SMMUv3 performance counters
- Add config option to disable the kuser helpers page for AArch32 tasks
- Futex modifications to ensure liveness under contention
- Rework debug exception handling to seperate kernel and user handlers
- Non-critical fixes and cleanup
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAlzMFGgACgkQt6xw3ITB
YzTicAf/TX1h1+ecbx4WJAa4qeiOCPoNpG9efldQumqJhKL44MR5bkhuShna5mwE
ptm5qUXkZCxLTjzssZKnbdbgwa3t+emW8Of3D91IfI9akiZbMoDx5FGgcNbqjazb
RLrhOFHwgontA38yppZN+DrL+sXbvif/CVELdHahkEx6KepSGaS2lmPXRmz/W56v
4yIRy/zxc3Dhjgfm3wKh72nBwoZdLiIc4mchd5pthNlR9E2idrYkQegG1C+gA00r
o8uZRVOWgoh7H+QJE+xLUc8PaNCg8xqRRXOuZYg9GOz6hh7zSWhm+f1nRz9S2tIR
gIgsCHNqoO2I3E1uJpAQXDGtt2kFhA==
=ulpJ
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"Mostly just incremental improvements here:
- Introduce AT_HWCAP2 for advertising CPU features to userspace
- Expose SVE2 availability to userspace
- Support for "data cache clean to point of deep persistence" (DC PODP)
- Honour "mitigations=off" on the cmdline and advertise status via
sysfs
- CPU timer erratum workaround (Neoverse-N1 #1188873)
- Introduce perf PMU driver for the SMMUv3 performance counters
- Add config option to disable the kuser helpers page for AArch32 tasks
- Futex modifications to ensure liveness under contention
- Rework debug exception handling to seperate kernel and user
handlers
- Non-critical fixes and cleanup"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (92 commits)
Documentation: Add ARM64 to kernel-parameters.rst
arm64/speculation: Support 'mitigations=' cmdline option
arm64: ssbs: Don't treat CPUs with SSBS as unaffected by SSB
arm64: enable generic CPU vulnerabilites support
arm64: add sysfs vulnerability show for speculative store bypass
arm64: Fix size of __early_cpu_boot_status
clocksource/arm_arch_timer: Use arch_timer_read_counter to access stable counters
clocksource/arm_arch_timer: Remove use of workaround static key
clocksource/arm_arch_timer: Drop use of static key in arch_timer_reg_read_stable
clocksource/arm_arch_timer: Direcly assign set_next_event workaround
arm64: Use arch_timer_read_counter instead of arch_counter_get_cntvct
watchdog/sbsa: Use arch_timer_read_counter instead of arch_counter_get_cntvct
ARM: vdso: Remove dependency with the arch_timer driver internals
arm64: Apply ARM64_ERRATUM_1188873 to Neoverse-N1
arm64: Add part number for Neoverse N1
arm64: Make ARM64_ERRATUM_1188873 depend on COMPAT
arm64: Restrict ARM64_ERRATUM_1188873 mitigation to AArch32
arm64: mm: Remove pte_unmap_nested()
arm64: Fix compiler warning from pte_unmap() with -Wunused-but-set-variable
arm64: compat: Reduce address limit for 64K pages
...
In KVM, specially for nested guests, there is a dominant pattern of:
=> map guest memory -> do_something -> unmap guest memory
In addition to all this unnecessarily noise in the code due to boiler plate
code, most of the time the mapping function does not properly handle memory
that is not backed by "struct page". This new guest mapping API encapsulate
most of this boiler plate code and also handles guest memory that is not
backed by "struct page".
The current implementation of this API is using memremap for memory that is
not backed by a "struct page" which would lead to a huge slow-down if it
was used for high-frequency mapping operations. The API does not have any
effect on current setups where guest memory is backed by a "struct page".
Further patches are going to also introduce a pfn-cache which would
significantly improve the performance of the memremap case.
Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
is_dirty has been renamed to flush, but the comment for it is
outdated. And the description about @flush parameter for
kvm_clear_dirty_log_protect() is missing, add it in this patch
as well.
Signed-off-by: Jiang Biao <benbjiang@tencent.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If a memory slot's size is not a multiple of 64 pages (256K), then
the KVM_CLEAR_DIRTY_LOG API is unusable: clearing the final 64 pages
either requires the requested page range to go beyond memslot->npages,
or requires log->num_pages to be unaligned, and kvm_clear_dirty_log_protect
requires log->num_pages to be both in range and aligned.
To allow this case, allow log->num_pages not to be a multiple of 64 if
it ends exactly on the last page of the slot.
Reported-by: Peter Xu <peterx@redhat.com>
Fixes: 98938aa8ed ("KVM: validate userspace input in kvm_clear_dirty_log_protect()", 2019-01-02)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- VSIE crypto fixes
- new guest features for gen15
- disable halt polling for nested virtualization with overcommit
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=mZyZ
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-next-5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
KVM: s390: Features and fixes for 5.2
- VSIE crypto fixes
- new guest features for gen15
- disable halt polling for nested virtualization with overcommit
If a memory slot's size is not a multiple of 64 pages (256K), then
the KVM_CLEAR_DIRTY_LOG API is unusable: clearing the final 64 pages
either requires the requested page range to go beyond memslot->npages,
or requires log->num_pages to be unaligned, and kvm_clear_dirty_log_protect
requires log->num_pages to be both in range and aligned.
To allow this case, allow log->num_pages not to be a multiple of 64 if
it ends exactly on the last page of the slot.
Reported-by: Peter Xu <peterx@redhat.com>
Fixes: 98938aa8ed ("KVM: validate userspace input in kvm_clear_dirty_log_protect()", 2019-01-02)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When a P9 sPAPR VM boots, the CAS negotiation process determines which
interrupt mode to use (XICS legacy or XIVE native) and invokes a
machine reset to activate the chosen mode.
To be able to switch from one interrupt mode to another, we introduce
the capability to release a KVM device without destroying the VM. The
KVM device interface is extended with a new 'release' method which is
called when the file descriptor of the device is closed.
Once 'release' is called, the 'destroy' method will not be called
anymore as the device is removed from the device list of the VM.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Some KVM devices will want to handle special mappings related to the
underlying HW. For instance, the XIVE interrupt controller of the
POWER9 processor has MMIO pages for thread interrupt management and
for interrupt source control that need to be exposed to the guest when
the OS has the required support.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
There are cases where halt polling is unwanted. For example when running
KVM on an over committed LPAR we rather want to give back the CPU to
neighbour LPARs instead of polling. Let us provide a callback that
allows architectures to disable polling.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
When a VCPU never runs before a guest exists, but we set timer registers
up via ioctls, the associated hrtimer might never get cancelled.
Since we moved vcpu_load/put into the arch-specific implementations and
only have load/put for KVM_RUN, we won't ever have a scheduled hrtimer
for emulating a timer when modifying the timer state via an ioctl from
user space. All we need to do is make sure that we pick up the right
state when we load the timer state next time userspace calls KVM_RUN
again.
We also do not need to worry about this interacting with the bg_timer,
because if we were in WFI from the guest, and somehow ended up in a
kvm_arm_timer_set_reg, it means that:
1. the VCPU thread has received a signal,
2. we have called vcpu_load when being scheduled in again,
3. we have called vcpu_put when we returned to userspace for it to issue
another ioctl
And therefore will not have a bg_timer programmed and the event is
treated as a spurious wakeup from WFI if userspace decides to run the
vcpu again even if there are not virtual interrupts.
This fixes stray virtual timer interrupts triggered by an expiring
hrtimer, which happens after a failed live migration, for instance.
Fixes: bee038a674 ("KVM: arm/arm64: Rework the timer code to use a timer_map")
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Reported-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
With commit a80868f398, we no longer ensure that the
THP page is properly aligned in the guest IPA. Skip the stage2
huge mapping for unaligned IPA backed by transparent hugepages.
Fixes: a80868f398 ("KVM: arm/arm64: Enforce PTE mappings at stage2 when needed")
Reported-by: Eric Auger <eric.auger@redhat.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Chirstoffer Dall <christoffer.dall@arm.com>
Cc: Zenghui Yu <yuzenghui@huawei.com>
Cc: Zheng Xiang <zhengxiang9@huawei.com>
Cc: Andrew Murray <andrew.murray@arm.com>
Cc: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
A failed KVM_ARM_VCPU_INIT should not set the vcpu target,
as the vcpu target is used by kvm_vcpu_initialized() to
determine if other vcpu ioctls may proceed. We need to set
the target before calling kvm_reset_vcpu(), but if that call
fails, we should then unset it and clear the feature bitmap
while we're at it.
Signed-off-by: Andrew Jones <drjones@redhat.com>
[maz: Simplified patch, completed commit message]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
With VHE different exception levels are used between the host (EL2) and
guest (EL1) with a shared exception level for userpace (EL0). We can take
advantage of this and use the PMU's exception level filtering to avoid
enabling/disabling counters in the world-switch code. Instead we just
modify the counter type to include or exclude EL0 at vcpu_{load,put} time.
We also ensure that trapped PMU system register writes do not re-enable
EL0 when reconfiguring the backing perf events.
This approach completely avoids blackout windows seen with !VHE.
Suggested-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Andrew Murray <andrew.murray@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
The virt/arm core allocates a kvm_cpu_context_t percpu, at present this is
a typedef to kvm_cpu_context and is used to store host cpu context. The
kvm_cpu_context structure is also used elsewhere to hold vcpu context.
In order to use the percpu to hold additional future host information we
encapsulate kvm_cpu_context in a new structure and rename the typedef and
percpu to match.
Signed-off-by: Andrew Murray <andrew.murray@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
When pointer authentication is supported, a guest may wish to use it.
This patch adds the necessary KVM infrastructure for this to work, with
a semi-lazy context switch of the pointer auth state.
Pointer authentication feature is only enabled when VHE is built
in the kernel and present in the CPU implementation so only VHE code
paths are modified.
When we schedule a vcpu, we disable guest usage of pointer
authentication instructions and accesses to the keys. While these are
disabled, we avoid context-switching the keys. When we trap the guest
trying to use pointer authentication functionality, we change to eagerly
context-switching the keys, and enable the feature. The next time the
vcpu is scheduled out/in, we start again. However the host key save is
optimized and implemented inside ptrauth instruction/register access
trap.
Pointer authentication consists of address authentication and generic
authentication, and CPUs in a system might have varied support for
either. Where support for either feature is not uniform, it is hidden
from guests via ID register emulation, as a result of the cpufeature
framework in the host.
Unfortunately, address authentication and generic authentication cannot
be trapped separately, as the architecture provides a single EL2 trap
covering both. If we wish to expose one without the other, we cannot
prevent a (badly-written) guest from intermittently using a feature
which is not uniformly supported (when scheduled on a physical CPU which
supports the relevant feature). Hence, this patch expects both type of
authentication to be present in a cpu.
This switch of key is done from guest enter/exit assembly as preparation
for the upcoming in-kernel pointer authentication support. Hence, these
key switching routines are not implemented in C code as they may cause
pointer authentication key signing error in some situations.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
[Only VHE, key switch in full assembly, vcpu_has_ptrauth checks
, save host key in ptrauth exception trap]
Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Cc: Christoffer Dall <christoffer.dall@arm.com>
Cc: kvmarm@lists.cs.columbia.edu
[maz: various fixups]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
The introduction of kvm_arm_init_arch_resources() looks like
premature factoring, since nothing else uses this hook yet and it
is not clear what will use it in the future.
For now, let's not pretend that this is a general thing:
This patch simply renames the function to kvm_arm_init_sve(),
retaining the arm stub version under the new name.
Suggested-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
All architectures except MIPS were defining it in the same way,
and memory slots are handled entirely by common code so there
is no point in keeping the definition per-architecture.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ARM64 standard pgtable functions are going to use pgtable_page_[ctor|dtor]
or pgtable_pmd_page_[ctor|dtor] constructs. At present KVM guest stage-2
PUD|PMD|PTE level page tabe pages are allocated with __get_free_page()
via mmu_memory_cache_alloc() but released with standard pud|pmd_free() or
pte_free_kernel(). These will fail once they start calling into pgtable_
[pmd]_page_dtor() for pages which never originally went through respective
constructor functions. Hence convert all stage-2 page table page release
functions to call buddy directly while freeing pages.
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Acked-by: Yu Zhao <yuzhao@google.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
When disabling LPIs (for example on reset) at the redistributor
level, it is expected that LPIs that was pending in the CPU
interface are eventually retired.
Currently, this is not what is happening, and these LPIs will
stay in the ap_list, eventually being acknowledged by the vcpu
(which didn't quite expect this behaviour).
The fix is thus to retire these LPIs from the list of pending
interrupts as we disable LPIs.
Reported-by: Heyi Guo <guoheyi@huawei.com>
Tested-by: Heyi Guo <guoheyi@huawei.com>
Fixes: 0e4e82f154 ("KVM: arm64: vgic-its: Enable ITS emulation as a virtual MSI controller")
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Recently the generic timer test of kvm-unit-tests failed to complete
(stalled) when a physical timer is being used. This issue is caused
by incorrect update of CNTP_CVAL when CNTP_TVAL is being accessed,
introduced by 'Commit 84135d3d18 ("KVM: arm/arm64: consolidate arch
timer trap handlers")'. According to Arm ARM, the read/write behavior
of accesses to the TVAL registers is expected to be:
* READ: TimerValue = (CompareValue – (Counter - Offset)
* WRITE: CompareValue = ((Counter - Offset) + Sign(TimerValue)
This patch fixes the TVAL read/write code path according to the
specification.
Fixes: 84135d3d18 ("KVM: arm/arm64: consolidate arch timer trap handlers")
Signed-off-by: Wei Huang <wei@redhat.com>
[maz: commit message tidy-up]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Some aspects of vcpu configuration may be too complex to be
completed inside KVM_ARM_VCPU_INIT. Thus, there may be a
requirement for userspace to do some additional configuration
before various other ioctls will work in a consistent way.
In particular this will be the case for SVE, where userspace will
need to negotiate the set of vector lengths to be made available to
the guest before the vcpu becomes fully usable.
In order to provide an explicit way for userspace to confirm that
it has finished setting up a particular vcpu feature, this patch
adds a new ioctl KVM_ARM_VCPU_FINALIZE.
When userspace has opted into a feature that requires finalization,
typically by means of a feature flag passed to KVM_ARM_VCPU_INIT, a
matching call to KVM_ARM_VCPU_FINALIZE is now required before
KVM_RUN or KVM_GET_REG_LIST is allowed. Individual features may
impose additional restrictions where appropriate.
No existing vcpu features are affected by this, so current
userspace implementations will continue to work exactly as before,
with no need to issue KVM_ARM_VCPU_FINALIZE.
As implemented in this patch, KVM_ARM_VCPU_FINALIZE is currently a
placeholder: no finalizable features exist yet, so ioctl is not
required and will always yield EINVAL. Subsequent patches will add
the finalization logic to make use of this ioctl for SVE.
No functional change for existing userspace.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
This patch adds a kvm_arm_init_arch_resources() hook to perform
subarch-specific initialisation when starting up KVM.
This will be used in a subsequent patch for global SVE-related
setup on arm64.
No functional change.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
- Fix THP handling in the presence of pre-existing PTEs
- Honor request for PTE mappings even when THPs are available
- GICv4 performance improvement
- Take the srcu lock when writing to guest-controlled ITS data structures
- Reset the virtual PMU in preemptible context
- Various cleanups
-----BEGIN PGP SIGNATURE-----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=mpQX
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master
KVM/ARM fixes for 5.1
- Fix THP handling in the presence of pre-existing PTEs
- Honor request for PTE mappings even when THPs are available
- GICv4 performance improvement
- Take the srcu lock when writing to guest-controlled ITS data structures
- Reset the virtual PMU in preemptible context
- Various cleanups
The function irqfd_wakeup() has flags defined as __poll_t and then it
has additional flags which is used for irqflags.
Redefine the inner flags variable as iflags so it does not shadow the
outer flags.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: kvm@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM's API requires thats ioctls must be issued from the same process
that created the VM. In other words, userspace can play games with a
VM's file descriptors, e.g. fork(), SCM_RIGHTS, etc..., but only the
creator can do anything useful. Explicitly reject device ioctls that
are issued by a process other than the VM's creator, and update KVM's
API documentation to extend its requirements to device ioctls.
Fixes: 852b6d57dc ("kvm: add device control API")
Cc: <stable@vger.kernel.org>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some comments in virt/kvm/arm/mmu.c are outdated. Update them to
reflect the current state of the code.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
[maz: commit message tidy-up]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Fix sparse warnings:
arch/arm64/kvm/../../../virt/kvm/arm/vgic/vgic-its.c:1732:5: warning:
symbol 'vgic_its_has_attr_regs' was not declared. Should it be static?
arch/arm64/kvm/../../../virt/kvm/arm/vgic/vgic-its.c:1753:5: warning:
symbol 'vgic_its_attr_regs_access' was not declared. Should it be static?
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
[maz: fixed subject]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
We rely on the mmu_notifier call backs to handle the split/merge
of huge pages and thus we are guaranteed that, while creating a
block mapping, either the entire block is unmapped at stage2 or it
is missing permission.
However, we miss a case where the block mapping is split for dirty
logging case and then could later be made block mapping, if we cancel the
dirty logging. This not only creates inconsistent TLB entries for
the pages in the the block, but also leakes the table pages for
PMD level.
Handle this corner case for the huge mappings at stage2 by
unmapping the non-huge mapping for the block. This could potentially
release the upper level table. So we need to restart the table walk
once we unmap the range.
Fixes : ad361f093c ("KVM: ARM: Support hugetlbfs backed huge pages")
Reported-by: Zheng Xiang <zhengxiang9@huawei.com>
Cc: Zheng Xiang <zhengxiang9@huawei.com>
Cc: Zenghui Yu <yuzenghui@huawei.com>
Cc: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
commit 6794ad5443 ("KVM: arm/arm64: Fix unintended stage 2 PMD mappings")
made the checks to skip huge mappings, stricter. However it introduced
a bug where we still use huge mappings, ignoring the flag to
use PTE mappings, by not reseting the vma_pagesize to PAGE_SIZE.
Also, the checks do not cover the PUD huge pages, that was
under review during the same period. This patch fixes both
the issues.
Fixes : 6794ad5443 ("KVM: arm/arm64: Fix unintended stage 2 PMD mappings")
Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Cc: Zenghui Yu <yuzenghui@huawei.com>
Cc: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
When halting a guest, QEMU flushes the virtual ITS caches, which
amounts to writing to the various tables that the guest has allocated.
When doing this, we fail to take the srcu lock, and the kernel
shouts loudly if running a lockdep kernel:
[ 69.680416] =============================
[ 69.680819] WARNING: suspicious RCU usage
[ 69.681526] 5.1.0-rc1-00008-g600025238f51-dirty #18 Not tainted
[ 69.682096] -----------------------------
[ 69.682501] ./include/linux/kvm_host.h:605 suspicious rcu_dereference_check() usage!
[ 69.683225]
[ 69.683225] other info that might help us debug this:
[ 69.683225]
[ 69.683975]
[ 69.683975] rcu_scheduler_active = 2, debug_locks = 1
[ 69.684598] 6 locks held by qemu-system-aar/4097:
[ 69.685059] #0: 0000000034196013 (&kvm->lock){+.+.}, at: vgic_its_set_attr+0x244/0x3a0
[ 69.686087] #1: 00000000f2ed935e (&its->its_lock){+.+.}, at: vgic_its_set_attr+0x250/0x3a0
[ 69.686919] #2: 000000005e71ea54 (&vcpu->mutex){+.+.}, at: lock_all_vcpus+0x64/0xd0
[ 69.687698] #3: 00000000c17e548d (&vcpu->mutex){+.+.}, at: lock_all_vcpus+0x64/0xd0
[ 69.688475] #4: 00000000ba386017 (&vcpu->mutex){+.+.}, at: lock_all_vcpus+0x64/0xd0
[ 69.689978] #5: 00000000c2c3c335 (&vcpu->mutex){+.+.}, at: lock_all_vcpus+0x64/0xd0
[ 69.690729]
[ 69.690729] stack backtrace:
[ 69.691151] CPU: 2 PID: 4097 Comm: qemu-system-aar Not tainted 5.1.0-rc1-00008-g600025238f51-dirty #18
[ 69.691984] Hardware name: rockchip evb_rk3399/evb_rk3399, BIOS 2019.04-rc3-00124-g2feec69fb1 03/15/2019
[ 69.692831] Call trace:
[ 69.694072] lockdep_rcu_suspicious+0xcc/0x110
[ 69.694490] gfn_to_memslot+0x174/0x190
[ 69.694853] kvm_write_guest+0x50/0xb0
[ 69.695209] vgic_its_save_tables_v0+0x248/0x330
[ 69.695639] vgic_its_set_attr+0x298/0x3a0
[ 69.696024] kvm_device_ioctl_attr+0x9c/0xd8
[ 69.696424] kvm_device_ioctl+0x8c/0xf8
[ 69.696788] do_vfs_ioctl+0xc8/0x960
[ 69.697128] ksys_ioctl+0x8c/0xa0
[ 69.697445] __arm64_sys_ioctl+0x28/0x38
[ 69.697817] el0_svc_common+0xd8/0x138
[ 69.698173] el0_svc_handler+0x38/0x78
[ 69.698528] el0_svc+0x8/0xc
The fix is to obviously take the srcu lock, just like we do on the
read side of things since bf308242ab. One wonders why this wasn't
fixed at the same time, but hey...
Fixes: bf308242ab ("KVM: arm/arm64: VGIC/ITS: protect kvm_read_guest() calls with SRCU lock")
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
The normal interrupt flow is not to enable the vgic when no virtual
interrupt is to be injected (i.e. the LRs are empty). But when a guest
is likely to use GICv4 for LPIs, we absolutely need to switch it on
at all times. Otherwise, VLPIs only get delivered when there is something
in the LRs, which doesn't happen very often.
Reported-by: Nianyao Tang <tangnianyao@huawei.com>
Tested-by: Shameerali Kolothum Thodi <shameerali.kolothum.thodi@huawei.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
for 32-bit guests
s390: interrupt cleanup, introduction of the Guest Information Block,
preparation for processor subfunctions in cpu models
PPC: bug fixes and improvements, especially related to machine checks
and protection keys
x86: many, many cleanups, including removing a bunch of MMU code for
unnecessary optimizations; plus AVIC fixes.
Generic: memcg accounting
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJci+7XAAoJEL/70l94x66DUMkIAKvEefhceySHYiTpfefjLjIC
16RewgHa+9CO4Oo5iXiWd90fKxtXLXmxDQOS4VGzN0rxvLGRw/fyXIxL1MDOkaAO
l8SLSNuewY4XBUgISL3PMz123r18DAGOuy9mEcYU/IMesYD2F+wy5lJ17HIGq6X2
RpoF1p3qO1jfkPTKOob6Ixd4H5beJNPKpdth7LY3PJaVhDxgouj32fxnLnATVSnN
gENQ10fnt8BCjshRYW6Z2/9bF15JCkUFR1xdBW2/xh1oj+kvPqqqk2bEN1eVQzUy
2hT/XkwtpthqjSbX8NNavWRSFnOnbMLTRKQyIXmFVsM5VoSrwtiGsCFzBgcT++I=
=XIzU
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"ARM:
- some cleanups
- direct physical timer assignment
- cache sanitization for 32-bit guests
s390:
- interrupt cleanup
- introduction of the Guest Information Block
- preparation for processor subfunctions in cpu models
PPC:
- bug fixes and improvements, especially related to machine checks
and protection keys
x86:
- many, many cleanups, including removing a bunch of MMU code for
unnecessary optimizations
- AVIC fixes
Generic:
- memcg accounting"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (147 commits)
kvm: vmx: fix formatting of a comment
KVM: doc: Document the life cycle of a VM and its resources
MAINTAINERS: Add KVM selftests to existing KVM entry
Revert "KVM/MMU: Flush tlb directly in the kvm_zap_gfn_range()"
KVM: PPC: Book3S: Add count cache flush parameters to kvmppc_get_cpu_char()
KVM: PPC: Fix compilation when KVM is not enabled
KVM: Minor cleanups for kvm_main.c
KVM: s390: add debug logging for cpu model subfunctions
KVM: s390: implement subfunction processor calls
arm64: KVM: Fix architecturally invalid reset value for FPEXC32_EL2
KVM: arm/arm64: Remove unused timer variable
KVM: PPC: Book3S: Improve KVM reference counting
KVM: PPC: Book3S HV: Fix build failure without IOMMU support
Revert "KVM: Eliminate extra function calls in kvm_get_dirty_log_protect()"
x86: kvmguest: use TSC clocksource if invariant TSC is exposed
KVM: Never start grow vCPU halt_poll_ns from value below halt_poll_ns_grow_start
KVM: Expose the initial start value in grow_halt_poll_ns() as a module parameter
KVM: grow_halt_poll_ns() should never shrink vCPU halt_poll_ns
KVM: x86/mmu: Consolidate kvm_mmu_zap_all() and kvm_mmu_zap_mmio_sptes()
KVM: x86/mmu: WARN if zapping a MMIO spte results in zapping children
...
- Update the ACPICA code in the kernel to upstream revision 20190215
including ACPI 6.3 support and more:
* New predefined methods: _NBS, _NCH, _NIC, _NIH, and _NIG (Erik
Schmauss).
* Update of the PCC Identifier structure in PDTT (Erik Schmauss).
* Support for new Generic Affinity Structure subtable in SRAT
(Erik Schmauss).
* New PCC operation region support (Erik Schmauss).
* Support for GICC statistical profiling for MADT (Erik Schmauss).
* New Error Disconnect Recover notification support (Erik Schmauss).
* New PPTT Processor Structure Flags fields support (Erik Schmauss).
* ACPI 6.3 HMAT updates (Erik Schmauss).
* GTDT Revision 3 support (Erik Schmauss).
* Legacy module-level code (MLC) support removal (Erik Schmauss).
* Update/clarification of messages for control method failures
(Bob Moore).
* Warning on creation of a zero-length opregion (Bob Moore).
* acpiexec option to dump extra info for memory leaks (Bob Moore).
* More ACPI error to firmware error conversions (Bob Moore).
* Debugger fix (Bob Moore).
* Copyrights update (Bob Moore).
- Clean up sleep states support code in ACPICA (Christoph Hellwig).
- Rework in_nmi() handling in the APEI code and add suppor for the
ARM Software Delegated Exception Interface (SDEI) to it (James
Morse).
- Fix possible out-of-bounds accesses in BERT-related core (Ross
Lagerwall).
- Fix the APEI code parsing HEST that includes a Deferred Machine
Check subtable (Yazen Ghannam).
- Use DEFINE_DEBUGFS_ATTRIBUTE for APEI-related debugfs files
(YueHaibing).
- Switch the APEI ERST code to the new generic UUID API (Andy
Shevchenko).
- Update the MAINTAINERS entry for APEI (Borislav Petkov).
- Fix and clean up the ACPI EC driver (Rafael Wysocki, Zhang Rui).
- Fix DMI checks handling in the ACPI backlight driver and add the
"Lunch Box" chassis-type check to it (Hans de Goede).
- Add support for using ACPI table overrides included in built-in
initrd images (Shunyong Yang).
- Update ACPI device enumeration to treat the PWM2 device as "always
present" on Lenovo Yoga Book (Yauhen Kharuzhy).
- Fix up the enumeration of device objects with the PRP0001 device
ID (Andy Shevchenko).
- Clean up PPTT parsing error messages (John Garry).
- Clean up debugfs files creation handling (Greg Kroah-Hartman,
Rafael Wysocki).
- Clean up the ACPI DPTF Makefile (Masahiro Yamada).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=r6fU
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These are ACPICA updates including ACPI 6.3 support among other
things, APEI updates including the ARM Software Delegated Exception
Interface (SDEI) support, ACPI EC driver fixes and cleanups and other
assorted improvements.
Specifics:
- Update the ACPICA code in the kernel to upstream revision 20190215
including ACPI 6.3 support and more:
* New predefined methods: _NBS, _NCH, _NIC, _NIH, and _NIG (Erik
Schmauss).
* Update of the PCC Identifier structure in PDTT (Erik Schmauss).
* Support for new Generic Affinity Structure subtable in SRAT
(Erik Schmauss).
* New PCC operation region support (Erik Schmauss).
* Support for GICC statistical profiling for MADT (Erik Schmauss).
* New Error Disconnect Recover notification support (Erik
Schmauss).
* New PPTT Processor Structure Flags fields support (Erik
Schmauss).
* ACPI 6.3 HMAT updates (Erik Schmauss).
* GTDT Revision 3 support (Erik Schmauss).
* Legacy module-level code (MLC) support removal (Erik Schmauss).
* Update/clarification of messages for control method failures
(Bob Moore).
* Warning on creation of a zero-length opregion (Bob Moore).
* acpiexec option to dump extra info for memory leaks (Bob Moore).
* More ACPI error to firmware error conversions (Bob Moore).
* Debugger fix (Bob Moore).
* Copyrights update (Bob Moore)
- Clean up sleep states support code in ACPICA (Christoph Hellwig)
- Rework in_nmi() handling in the APEI code and add suppor for the
ARM Software Delegated Exception Interface (SDEI) to it (James
Morse)
- Fix possible out-of-bounds accesses in BERT-related core (Ross
Lagerwall)
- Fix the APEI code parsing HEST that includes a Deferred Machine
Check subtable (Yazen Ghannam)
- Use DEFINE_DEBUGFS_ATTRIBUTE for APEI-related debugfs files
(YueHaibing)
- Switch the APEI ERST code to the new generic UUID API (Andy
Shevchenko)
- Update the MAINTAINERS entry for APEI (Borislav Petkov)
- Fix and clean up the ACPI EC driver (Rafael Wysocki, Zhang Rui)
- Fix DMI checks handling in the ACPI backlight driver and add the
"Lunch Box" chassis-type check to it (Hans de Goede)
- Add support for using ACPI table overrides included in built-in
initrd images (Shunyong Yang)
- Update ACPI device enumeration to treat the PWM2 device as "always
present" on Lenovo Yoga Book (Yauhen Kharuzhy)
- Fix up the enumeration of device objects with the PRP0001 device ID
(Andy Shevchenko)
- Clean up PPTT parsing error messages (John Garry)
- Clean up debugfs files creation handling (Greg Kroah-Hartman,
Rafael Wysocki)
- Clean up the ACPI DPTF Makefile (Masahiro Yamada)"
* tag 'acpi-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (65 commits)
ACPI / bus: Respect PRP0001 when retrieving device match data
ACPICA: Update version to 20190215
ACPI/ACPICA: Trivial: fix spelling mistakes and fix whitespace formatting
ACPICA: ACPI 6.3: add GTDT Revision 3 support
ACPICA: ACPI 6.3: HMAT updates
ACPICA: ACPI 6.3: PPTT add additional fields in Processor Structure Flags
ACPICA: ACPI 6.3: add Error Disconnect Recover Notification value
ACPICA: ACPI 6.3: MADT: add support for statistical profiling in GICC
ACPICA: ACPI 6.3: add PCC operation region support for AML interpreter
efi: cper: Fix possible out-of-bounds access
ACPI: APEI: Fix possible out-of-bounds access to BERT region
ACPICA: ACPI 6.3: SRAT: add Generic Affinity Structure subtable
ACPICA: ACPI 6.3: Add Trigger order to PCC Identifier structure in PDTT
ACPICA: ACPI 6.3: Adding predefined methods _NBS, _NCH, _NIC, _NIH, and _NIG
ACPICA: Update/clarify messages for control method failures
ACPICA: Debugger: Fix possible fault with the "test objects" command
ACPICA: Interpreter: Emit warning for creation of a zero-length op region
ACPICA: Remove legacy module-level code support
ACPI / x86: Make PWM2 device always present at Lenovo Yoga Book
ACPI / video: Extend chassis-type detection with a "Lunch Box" check
..
* acpi-apei: (29 commits)
efi: cper: Fix possible out-of-bounds access
ACPI: APEI: Fix possible out-of-bounds access to BERT region
MAINTAINERS: Add James Morse to the list of APEI reviewers
ACPI / APEI: Add support for the SDEI GHES Notification type
firmware: arm_sdei: Add ACPI GHES registration helper
ACPI / APEI: Use separate fixmap pages for arm64 NMI-like notifications
ACPI / APEI: Only use queued estatus entry during in_nmi_queue_one_entry()
ACPI / APEI: Split ghes_read_estatus() to allow a peek at the CPER length
ACPI / APEI: Make GHES estatus header validation more user friendly
ACPI / APEI: Pass ghes and estatus separately to avoid a later copy
ACPI / APEI: Let the notification helper specify the fixmap slot
ACPI / APEI: Move locking to the notification helper
arm64: KVM/mm: Move SEA handling behind a single 'claim' interface
KVM: arm/arm64: Add kvm_ras.h to collect kvm specific RAS plumbing
ACPI / APEI: Switch NOTIFY_SEA to use the estatus queue
ACPI / APEI: Move NOTIFY_SEA between the estatus-queue and NOTIFY_NMI
ACPI / APEI: Don't allow ghes_ack_error() to mask earlier errors
ACPI / APEI: Generalise the estatus queue's notify code
ACPI / APEI: Don't update struct ghes' flags in read/clear estatus
ACPI / APEI: Remove spurious GHES_TO_CLEAR check
...
debugfs can now report an error code if something went wrong instead of
just NULL. So if the return value is to be used as a "real" dentry, it
needs to be checked if it is an error before dereferencing it.
This is now happening because of ff9fb72bc0 ("debugfs: return error
values, not NULL"). syzbot has found a way to trigger multiple debugfs
files attempting to be created, which fails, and then the error code
gets passed to dentry_path_raw() which obviously does not like it.
Reported-by: Eric Biggers <ebiggers@kernel.org>
Reported-and-tested-by: syzbot+7857962b4d45e602b8ad@syzkaller.appspotmail.com
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: kvm@vger.kernel.org
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- A number of pre-nested code rework
- Direct physical timer assignment on VHE systems
- kvm_call_hyp type safety enforcement
- Set/Way cache sanitisation for 32bit guests
- Build system cleanups
- A bunch of janitorial fixes
-----BEGIN PGP SIGNATURE-----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=iEs0
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-next
KVM/arm updates for Linux v5.1
- A number of pre-nested code rework
- Direct physical timer assignment on VHE systems
- kvm_call_hyp type safety enforcement
- Set/Way cache sanitisation for 32bit guests
- Build system cleanups
- A bunch of janitorial fixes
This patch contains two minor cleanups: firstly it puts exported symbol
for kvm_io_bus_write() by following the function definition; secondly it
removes a redundant blank line.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The 'timer' local variable became unused after commit bee038a674
("KVM: arm/arm64: Rework the timer code to use a timer_map").
Remove it to avoid [-Wunused-but-set-variable] warning.
Cc: Christoffer Dall <christoffer.dall@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Suzuki K Pouloze <suzuki.poulose@arm.com>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
The value of "dirty_bitmap[i]" is already check before setting its value
to mask. The following check of "mask" is redundant. The check of "mask" was
introduced by commit 58d2930f4e ("KVM: Eliminate extra function calls in
kvm_get_dirty_log_protect()"), revert it.
Signed-off-by: Lan Tianyu <Tianyu.Lan@microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
grow_halt_poll_ns() have a strange behaviour in case
(vcpu->halt_poll_ns != 0) &&
(vcpu->halt_poll_ns < halt_poll_ns_grow_start).
In this case, vcpu->halt_poll_ns will be multiplied by grow factor
(halt_poll_ns_grow) which will require several grow iteration in order
to reach a value bigger than halt_poll_ns_grow_start.
This means that growing vcpu->halt_poll_ns from value of 0 is slower
than growing it from a positive value less than halt_poll_ns_grow_start.
Which is misleading and inaccurate.
Fix issue by changing grow_halt_poll_ns() to set vcpu->halt_poll_ns
to halt_poll_ns_grow_start in any case that
(vcpu->halt_poll_ns < halt_poll_ns_grow_start).
Regardless if vcpu->halt_poll_ns is 0.
use READ_ONCE to get a consistent number for all cases.
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Nir Weiner <nir.weiner@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The hard-coded value 10000 in grow_halt_poll_ns() stands for the initial
start value when raising up vcpu->halt_poll_ns.
It actually sets the first timeout to the first polling session.
This value has significant effect on how tolerant we are to outliers.
On the standard case, higher value is better - we will spend more time
in the polling busyloop, handle events/interrupts faster and result
in better performance.
But on outliers it puts us in a busy loop that does nothing.
Even if the shrink factor is zero, we will still waste time on the first
iteration.
The optimal value changes between different workloads. It depends on
outliers rate and polling sessions length.
As this value has significant effect on the dynamic halt-polling
algorithm, it should be configurable and exposed.
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Nir Weiner <nir.weiner@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
grow_halt_poll_ns() have a strange behavior in case
(halt_poll_ns_grow == 0) && (vcpu->halt_poll_ns != 0).
In this case, vcpu->halt_pol_ns will be set to zero.
That results in shrinking instead of growing.
Fix issue by changing grow_halt_poll_ns() to not modify
vcpu->halt_poll_ns in case halt_poll_ns_grow is zero
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Nir Weiner <nir.weiner@oracle.com>
Suggested-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
...now that KVM won't explode by moving it out of bit 0. Using bit 63
eliminates the need to jump over bit 0, e.g. when calculating a new
memslots generation or when propagating the memslots generation to an
MMIO spte.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
x86 captures a subset of the memslot generation (19 bits) in its MMIO
sptes so that it can expedite emulated MMIO handling by checking only
the releveant spte, i.e. doesn't need to do a full page fault walk.
Because the MMIO sptes capture only 19 bits (due to limited space in
the sptes), there is a non-zero probability that the MMIO generation
could wrap, e.g. after 500k memslot updates. Since normal usage is
extremely unlikely to result in 500k memslot updates, a hack was added
by commit 69c9ea93ea ("KVM: MMU: init kvm generation close to mmio
wrap-around value") to offset the MMIO generation in order to trigger
a wraparound, e.g. after 150 memslot updates.
When separate memslot generation sequences were assigned to each
address space, commit 00f034a12f ("KVM: do not bias the generation
number in kvm_current_mmio_generation") moved the offset logic into the
initialization of the memslot generation itself so that the per-address
space bit(s) were not dropped/corrupted by the MMIO shenanigans.
Remove the offset hack for three reasons:
- While it does exercise x86's kvm_mmu_invalidate_mmio_sptes(), simply
wrapping the generation doesn't actually test the interesting case
of having stale MMIO sptes with the new generation number, e.g. old
sptes with a generation number of 0.
- Triggering kvm_mmu_invalidate_mmio_sptes() prematurely makes its
performance rather important since the probability of invalidating
MMIO sptes jumps from "effectively never" to "fairly likely". This
limits what can be done in future patches, e.g. to simplify the
invalidation code, as doing so without proper caution could lead to
a noticeable performance regression.
- Forcing the memslots generation, which is a 64-bit number, to wrap
prevents KVM from assuming the memslots generation will never wrap.
This in turn prevents KVM from using an arbitrary bit for the
"update in-progress" flag, e.g. using bit 63 would immediately
collide with using a large value as the starting generation number.
The "update in-progress" flag is effectively forced into bit 0 so
that it's (subtly) taken into account when incrementing the
generation.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM uses bit 0 of the memslots generation as an "update in-progress"
flag, which is used by x86 to prevent caching MMIO access while the
memslots are changing. Although the intended behavior is flag-like,
e.g. MMIO sptes intentionally drop the in-progress bit so as to avoid
caching data from in-flux memslots, the implementation oftentimes treats
the bit as part of the generation number itself, e.g. incrementing the
generation increments twice, once to set the flag and once to clear it.
Prior to commit 4bd518f159 ("KVM: use separate generations for
each address space"), incorporating the "update in-progress" bit into
the generation number largely made sense, e.g. "real" generations are
even, "bogus" generations are odd, most code doesn't need to be aware of
the bit, etc...
Now that unique memslots generation numbers are assigned to each address
space, stealthing the in-progress status into the generation number
results in a wide variety of subtle code, e.g. kvm_create_vm() jumps
over bit 0 when initializing the memslots generation without any hint as
to why.
Explicitly define the flag and convert as much code as possible (which
isn't much) to actually treat it like a flag. This paves the way for
eventually using a different bit for "update in-progress" so that it can
be a flag in truth instead of a awkward extension to the generation
number.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_arch_memslots_updated() is at this point in time an x86-specific
hook for handling MMIO generation wraparound. x86 stashes 19 bits of
the memslots generation number in its MMIO sptes in order to avoid
full page fault walks for repeat faults on emulated MMIO addresses.
Because only 19 bits are used, wrapping the MMIO generation number is
possible, if unlikely. kvm_arch_memslots_updated() alerts x86 that
the generation has changed so that it can invalidate all MMIO sptes in
case the effective MMIO generation has wrapped so as to avoid using a
stale spte, e.g. a (very) old spte that was created with generation==0.
Given that the purpose of kvm_arch_memslots_updated() is to prevent
consuming stale entries, it needs to be called before the new generation
is propagated to memslots. Invalidating the MMIO sptes after updating
memslots means that there is a window where a vCPU could dereference
the new memslots generation, e.g. 0, and incorrectly reuse an old MMIO
spte that was created with (pre-wrap) generation==0.
Fixes: e59dbe09f8 ("KVM: Introduce kvm_arch_memslots_updated()")
Cc: <stable@vger.kernel.org>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are many KVM kernel memory allocations which are tied to the life of
the VM process and should be charged to the VM process's cgroup. If the
allocations aren't tied to the process, the OOM killer will not know
that killing the process will free the associated kernel memory.
Add __GFP_ACCOUNT flags to many of the allocations which are not yet being
charged to the VM process's cgroup.
Tested:
Ran all kvm-unit-tests on a 64 bit Haswell machine, the patch
introduced no new failures.
Ran a kernel memory accounting test which creates a VM to touch
memory and then checks that the kernel memory allocated for the
process is within certain bounds.
With this patch we account for much more of the vmalloc and slab memory
allocated for the VM.
There remain a few allocations which should be charged to the VM's
cgroup but are not. In they include:
vcpu->run
kvm->coalesced_mmio_ring
There allocations are unaccounted in this patch because they are mapped
to userspace, and accounting them to a cgroup causes problems. This
should be addressed in a future patch.
Signed-off-by: Ben Gardon <bgardon@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
struct foo {
int stuff;
void *entry[];
};
instance = kmalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL);
Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:
instance = kmalloc(struct_size(instance, entry, count), GFP_KERNEL);
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The 'gpa_end' local variable is never used and let's remove it.
Cc: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
There is a spelling mistake in a kvm_err error message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
As the comment block in include/trace/define_trace.h says,
TRACE_INCLUDE_PATH should be a relative path to the define_trace.h
../../virt/kvm/arm is the correct relative path.
../../../virt/kvm/arm is working by coincidence because the top
Makefile adds -I$(srctree)/arch/$(SRCARCH)/include as a header
search path, but we should not rely on it.
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
When a guest gets scheduled, KVM performs a "load" operation,
which for the timer includes evaluating the virtual "active" state
of the interrupt, and replicating it on the physical side. This
ensures that the deactivation in the guest will also take place
in the physical GIC distributor.
If the interrupt is not yet active, we flag it as inactive on the
physical side. This means that on restoring the timer registers,
if the timer has expired, we'll immediately take an interrupt.
That's absolutely fine, as the interrupt will then be flagged as
active on the physical side. What this assumes though is that we'll
enter the guest right after having taken the interrupt, and that
the guest will quickly ACK the interrupt, making it active at on
the virtual side.
It turns out that quite often, this assumption doesn't really hold.
The guest may be preempted on the back on this interrupt, either
from kernel space or whilst running at EL1 when a host interrupt
fires. When this happens, we repeat the whole sequence on the
next load (interrupt marked as inactive, timer registers restored,
interrupt fires). And if it takes a really long time for a guest
to activate the interrupt (as it does with nested virt), we end-up
with many such events in quick succession, leading to the guest only
making very slow progress.
This can also be seen with the number of virtual timer interrupt on the
host being far greater than the same number in the guest.
An easy way to fix this is to evaluate the timer state when performing
the "load" operation, just like we do when the interrupt actually fires.
If the timer has a pending virtual interrupt at this stage, then we
can safely flag the physical interrupt as being active, which prevents
spurious exits.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Move this little function to the header files for arm/arm64 so other
code can make use of it directly.
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
We are currently emulating two timers in two different ways. When we
add support for nested virtualization in the future, we are going to be
emulating either two timers in two diffferent ways, or four timers in a
single way.
We need a unified data structure to keep track of how we map virtual
state to physical state and we need to cleanup some of the timer code to
operate more independently on a struct arch_timer_context instead of
trying to consider the global state of the VCPU and recomputing all
state.
Co-written with Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
VHE systems don't have to emulate the physical timer, we can simply
assign the EL1 physical timer directly to the VM as the host always
uses the EL2 timers.
In order to minimize the amount of cruft, AArch32 gets definitions for
the physical timer too, but is should be generally unused on this
architecture.
Co-written with Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Prepare for having 4 timer data structures (2 for now).
Move loaded to the cpu data structure and not the individual timer
structure, in preparation for assigning the EL1 phys timer as well.
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
At the moment we have separate system register emulation handlers for
each timer register. Actually they are quite similar, and we rely on
kvm_arm_timer_[gs]et_reg() for the actual emulation anyways, so let's
just merge all of those handlers into one function, which just marshalls
the arguments and then hands off to a set of common accessors.
This makes extending the emulation to include EL2 timers much easier.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
[Fixed 32-bit VM breakage and reduced to reworking existing code]
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
[Fixed 32bit host, general cleanup]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
We previously incorrectly named the define for this system register.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Instead of calling into kvm_timer_[un]schedule from the main kvm
blocking path, test if the VCPU is on the wait queue from the load/put
path and perform the background timer setup/cancel in this path.
This has the distinct advantage that we no longer race between load/put
and schedule/unschedule and programming and canceling of the bg_timer
always happens when the timer state is not loaded.
Note that we must now remove the checks in kvm_timer_blocking that do
not schedule a background timer if one of the timers can fire, because
we no longer have a guarantee that kvm_vcpu_check_block() will be called
before kvm_timer_blocking.
Reported-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
In preparation for nested virtualization where we are going to have more
than a single VMID per VM, let's factor out the VMID data into a
separate VMID data structure and change the VMID allocator to operate on
this new structure instead of using a struct kvm.
This also means that udate_vttbr now becomes update_vmid, and that the
vttbr itself is generated on the fly based on the stage 2 page table
base address and the vmid.
We cache the physical address of the pgd when allocating the pgd to
avoid doing the calculation on every entry to the guest and to avoid
calling into potentially non-hyp-mapped code from hyp/EL2.
If we wanted to merge the VMID allocator with the arm64 ASID allocator
at some point in the future, it should actually become easier to do that
after this patch.
Note that to avoid mapping the kvm_vmid_bits variable into hyp, we
simply forego the masking of the vmid value in kvm_get_vttbr and rely on
update_vmid to always assign a valid vmid value (within the supported
range).
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
[maz: minor cleanups]
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
We currently eagerly save/restore MPIDR. It turns out to be
slightly pointless:
- On the host, this value is known as soon as we're scheduled on a
physical CPU
- In the guest, this value cannot change, as it is set by KVM
(and this is a read-only register)
The result of the above is that we can perfectly avoid the eager
saving of MPIDR_EL1, and only keep the restore. We just have
to setup the host contexts appropriately at boot time.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Until now, we haven't differentiated between HYP calls that
have a return value and those who don't. As we're about to
change this, introduce kvm_call_hyp_ret(), and change all
call sites that actually make use of a return value.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
- Fix the way we reset vcpus, plugging the race that could happen on VHE
- Fix potentially inconsistent group setting for private interrupts
- Don't generate UNDEF when LORegion feature is present
- Relax the restriction on using stage2 PUD huge mapping
- Turn some spinlocks into raw_spinlocks to help RT compliance
-----BEGIN PGP SIGNATURE-----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=PNZ5
-----END PGP SIGNATURE-----
Merge tag 'kvm-arm-fixes-for-5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master
KVM/ARM fixes for 5.0:
- Fix the way we reset vcpus, plugging the race that could happen on VHE
- Fix potentially inconsistent group setting for private interrupts
- Don't generate UNDEF when LORegion feature is present
- Relax the restriction on using stage2 PUD huge mapping
- Turn some spinlocks into raw_spinlocks to help RT compliance
Pull the latest RCU tree from Paul E. McKenney:
- Additional cleanups after RCU flavor consolidation
- Grace-period forward-progress cleanups and improvements
- Documentation updates
- Miscellaneous fixes
- spin_is_locked() conversions to lockdep
- SPDX changes to RCU source and header files
- SRCU updates
- Torture-test updates, including nolibc updates and moving
nolibc to tools/include
Signed-off-by: Ingo Molnar <mingo@kernel.org>
To split up APEIs in_nmi() path, the caller needs to always be
in_nmi(). KVM shouldn't have to know about this, pull the RAS plumbing
out into a header file.
Currently guest synchronous external aborts are claimed as RAS
notifications by handle_guest_sea(), which is hidden in the arch codes
mm/fault.c. 32bit gets a dummy declaration in system_misc.h.
There is going to be more of this in the future if/when the kernel
supports the SError-based firmware-first notification mechanism and/or
kernel-first notifications for both synchronous external abort and
SError. Each of these will come with some Kconfig symbols and a
handful of header files.
Create a header file for all this.
This patch gives handle_guest_sea() a 'kvm_' prefix, and moves the
declarations to kvm_ras.h as preparation for a future patch that moves
the ACPI-specific RAS code out of mm/fault.c.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Punit Agrawal <punit.agrawal@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Tyler Baicar <tbaicar@codeaurora.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
kvm_ioctl_create_device() does the following:
1. creates a device that holds a reference to the VM object (with a borrowed
reference, the VM's refcount has not been bumped yet)
2. initializes the device
3. transfers the reference to the device to the caller's file descriptor table
4. calls kvm_get_kvm() to turn the borrowed reference to the VM into a real
reference
The ownership transfer in step 3 must not happen before the reference to the VM
becomes a proper, non-borrowed reference, which only happens in step 4.
After step 3, an attacker can close the file descriptor and drop the borrowed
reference, which can cause the refcount of the kvm object to drop to zero.
This means that we need to grab a reference for the device before
anon_inode_getfd(), otherwise the VM can disappear from under us.
Fixes: 852b6d57dc ("kvm: add device control API")
Cc: stable@kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We restrict mapping the PUD huge pages in stage2 to only when the
stage2 has 4 level page table, leaving the feature unused with
the default IPA size. But we could use it even with a 3
level page table, i.e, when the PUD level is folded into PGD,
just like the stage1. Relax the condition to allow using the
PUD huge page mappings at stage2 when it is possible.
Cc: Christoffer Dall <christoffer.dall@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
We currently initialize the group of private IRQs during
kvm_vgic_vcpu_init, and the value of the group depends on the GIC model
we are emulating. However, CPUs created before creating (and
initializing) the VGIC might end up with the wrong group if the VGIC
is created as GICv3 later.
Since we have no enforced ordering of creating the VGIC and creating
VCPUs, we can end up with part the VCPUs being properly intialized and
the remaining incorrectly initialized. That also means that we have no
single place to do the per-cpu data structure initialization which
depends on knowing the emulated GIC model (which is only the group
field).
This patch removes the incorrect comment from kvm_vgic_vcpu_init and
initializes the group of all previously created VCPUs's private
interrupts in vgic_init in addition to the existing initialization in
kvm_vgic_vcpu_init.
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
The current kvm_psci_vcpu_on implementation will directly try to
manipulate the state of the VCPU to reset it. However, since this is
not done on the thread that runs the VCPU, we can end up in a strangely
corrupted state when the source and target VCPUs are running at the same
time.
Fix this by factoring out all reset logic from the PSCI implementation
and forwarding the required information along with a request to the
target VCPU.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
lockdep_assert_held() is better suited to checking locking requirements,
since it only checks if the current thread holds the lock regardless of
whether someone else does. This is also a step towards possibly removing
spin_is_locked().
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: <kvm@vger.kernel.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
vgic_cpu->ap_list_lock must always be taken with interrupts disabled as
it is used in interrupt context.
For configurations such as PREEMPT_RT_FULL, this means that it should
be a raw_spinlock since RT spinlocks are interruptible.
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
vgic_dist->lpi_list_lock must always be taken with interrupts disabled as
it is used in interrupt context.
For configurations such as PREEMPT_RT_FULL, this means that it should
be a raw_spinlock since RT spinlocks are interruptible.
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
vgic_irq->irq_lock must always be taken with interrupts disabled as
it is used in interrupt context.
For configurations such as PREEMPT_RT_FULL, this means that it should
be a raw_spinlock since RT spinlocks are interruptible.
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
The function at issue does not fully validate the content of the
structure pointed by the log parameter, though its content has just been
copied from userspace and lacks validation. Fix that.
Moreover, change the type of n to unsigned long as that is the type
returned by kvm_dirty_bitmap_bytes().
Signed-off-by: Tomas Bortoli <tomasbortoli@gmail.com>
Reported-by: syzbot+028366e52c9ace67deb3@syzkaller.appspotmail.com
[Squashed the fix from Paolo. - Radim.]
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Merge more updates from Andrew Morton:
- procfs updates
- various misc bits
- lib/ updates
- epoll updates
- autofs
- fatfs
- a few more MM bits
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (58 commits)
mm/page_io.c: fix polled swap page in
checkpatch: add Co-developed-by to signature tags
docs: fix Co-Developed-by docs
drivers/base/platform.c: kmemleak ignore a known leak
fs: don't open code lru_to_page()
fs/: remove caller signal_pending branch predictions
mm/: remove caller signal_pending branch predictions
arch/arc/mm/fault.c: remove caller signal_pending_branch predictions
kernel/sched/: remove caller signal_pending branch predictions
kernel/locking/mutex.c: remove caller signal_pending branch predictions
mm: select HAVE_MOVE_PMD on x86 for faster mremap
mm: speed up mremap by 20x on large regions
mm: treewide: remove unused address argument from pte_alloc functions
initramfs: cleanup incomplete rootfs
scripts/gdb: fix lx-version string output
kernel/kcov.c: mark write_comp_data() as notrace
kernel/sysctl: add panic_print into sysctl
panic: add options to print system info when panic happens
bfs: extra sanity checking and static inode bitmap
exec: separate MM_ANONPAGES and RLIMIT_STACK accounting
...
Patch series "Add support for fast mremap".
This series speeds up the mremap(2) syscall by copying page tables at
the PMD level even for non-THP systems. There is concern that the extra
'address' argument that mremap passes to pte_alloc may do something
subtle architecture related in the future that may make the scheme not
work. Also we find that there is no point in passing the 'address' to
pte_alloc since its unused. This patch therefore removes this argument
tree-wide resulting in a nice negative diff as well. Also ensuring
along the way that the enabled architectures do not do anything funky
with the 'address' argument that goes unnoticed by the optimization.
Build and boot tested on x86-64. Build tested on arm64. The config
enablement patch for arm64 will be posted in the future after more
testing.
The changes were obtained by applying the following Coccinelle script.
(thanks Julia for answering all Coccinelle questions!).
Following fix ups were done manually:
* Removal of address argument from pte_fragment_alloc
* Removal of pte_alloc_one_fast definitions from m68k and microblaze.
// Options: --include-headers --no-includes
// Note: I split the 'identifier fn' line, so if you are manually
// running it, please unsplit it so it runs for you.
virtual patch
@pte_alloc_func_def depends on patch exists@
identifier E2;
identifier fn =~
"^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$";
type T2;
@@
fn(...
- , T2 E2
)
{ ... }
@pte_alloc_func_proto_noarg depends on patch exists@
type T1, T2, T3, T4;
identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$";
@@
(
- T3 fn(T1, T2);
+ T3 fn(T1);
|
- T3 fn(T1, T2, T4);
+ T3 fn(T1, T2);
)
@pte_alloc_func_proto depends on patch exists@
identifier E1, E2, E4;
type T1, T2, T3, T4;
identifier fn =~
"^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$";
@@
(
- T3 fn(T1 E1, T2 E2);
+ T3 fn(T1 E1);
|
- T3 fn(T1 E1, T2 E2, T4 E4);
+ T3 fn(T1 E1, T2 E2);
)
@pte_alloc_func_call depends on patch exists@
expression E2;
identifier fn =~
"^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$";
@@
fn(...
-, E2
)
@pte_alloc_macro depends on patch exists@
identifier fn =~
"^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$";
identifier a, b, c;
expression e;
position p;
@@
(
- #define fn(a, b, c) e
+ #define fn(a, b) e
|
- #define fn(a, b) e
+ #define fn(a) e
)
Link: http://lkml.kernel.org/r/20181108181201.88826-2-joelaf@google.com
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Suggested-by: Kirill A. Shutemov <kirill@shutemov.name>
Acked-by: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: William Kucharski <william.kucharski@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument
of the user address range verification function since we got rid of the
old racy i386-only code to walk page tables by hand.
It existed because the original 80386 would not honor the write protect
bit when in kernel mode, so you had to do COW by hand before doing any
user access. But we haven't supported that in a long time, and these
days the 'type' argument is a purely historical artifact.
A discussion about extending 'user_access_begin()' to do the range
checking resulted this patch, because there is no way we're going to
move the old VERIFY_xyz interface to that model. And it's best done at
the end of the merge window when I've done most of my merges, so let's
just get this done once and for all.
This patch was mostly done with a sed-script, with manual fix-ups for
the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form.
There were a couple of notable cases:
- csky still had the old "verify_area()" name as an alias.
- the iter_iov code had magical hardcoded knowledge of the actual
values of VERIFY_{READ,WRITE} (not that they mattered, since nothing
really used it)
- microblaze used the type argument for a debug printout
but other than those oddities this should be a total no-op patch.
I tried to fix up all architectures, did fairly extensive grepping for
access_ok() uses, and the changes are trivial, but I may have missed
something. Any missed conversion should be trivially fixable, though.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mmu notifier contextual informations", v2.
This patchset adds contextual information, why an invalidation is
happening, to mmu notifier callback. This is necessary for user of mmu
notifier that wish to maintains their own data structure without having to
add new fields to struct vm_area_struct (vma).
For instance device can have they own page table that mirror the process
address space. When a vma is unmap (munmap() syscall) the device driver
can free the device page table for the range.
Today we do not have any information on why a mmu notifier call back is
happening and thus device driver have to assume that it is always an
munmap(). This is inefficient at it means that it needs to re-allocate
device page table on next page fault and rebuild the whole device driver
data structure for the range.
Other use case beside munmap() also exist, for instance it is pointless
for device driver to invalidate the device page table when the
invalidation is for the soft dirtyness tracking. Or device driver can
optimize away mprotect() that change the page table permission access for
the range.
This patchset enables all this optimizations for device drivers. I do not
include any of those in this series but another patchset I am posting will
leverage this.
The patchset is pretty simple from a code point of view. The first two
patches consolidate all mmu notifier arguments into a struct so that it is
easier to add/change arguments. The last patch adds the contextual
information (munmap, protection, soft dirty, clear, ...).
This patch (of 3):
To avoid having to change many callback definition everytime we want to
add a parameter use a structure to group all parameters for the
mmu_notifier invalidate_range_start/end callback. No functional changes
with this patch.
[akpm@linux-foundation.org: fix drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c kerneldoc]
Link: http://lkml.kernel.org/r/20181205053628.3210-2-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Acked-by: Jan Kara <jack@suse.cz>
Acked-by: Jason Gunthorpe <jgg@mellanox.com> [infiniband]
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Ross Zwisler <zwisler@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krcmar <rkrcmar@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Felix Kuehling <felix.kuehling@amd.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull RCU updates from Ingo Molnar:
"The biggest RCU changes in this cycle were:
- Convert RCU's BUG_ON() and similar calls to WARN_ON() and similar.
- Replace calls of RCU-bh and RCU-sched update-side functions to
their vanilla RCU counterparts. This series is a step towards
complete removal of the RCU-bh and RCU-sched update-side functions.
( Note that some of these conversions are going upstream via their
respective maintainers. )
- Documentation updates, including a number of flavor-consolidation
updates from Joel Fernandes.
- Miscellaneous fixes.
- Automate generation of the initrd filesystem used for rcutorture
testing.
- Convert spin_is_locked() assertions to instead use lockdep.
( Note that some of these conversions are going upstream via their
respective maintainers. )
- SRCU updates, especially including a fix from Dennis Krein for a
bag-on-head-class bug.
- RCU torture-test updates"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (112 commits)
rcutorture: Don't do busted forward-progress testing
rcutorture: Use 100ms buckets for forward-progress callback histograms
rcutorture: Recover from OOM during forward-progress tests
rcutorture: Print forward-progress test age upon failure
rcutorture: Print time since GP end upon forward-progress failure
rcutorture: Print histogram of CB invocation at OOM time
rcutorture: Print GP age upon forward-progress failure
rcu: Print per-CPU callback counts for forward-progress failures
rcu: Account for nocb-CPU callback counts in RCU CPU stall warnings
rcutorture: Dump grace-period diagnostics upon forward-progress OOM
rcutorture: Prepare for asynchronous access to rcu_fwd_startat
torture: Remove unnecessary "ret" variables
rcutorture: Affinity forward-progress test to avoid housekeeping CPUs
rcutorture: Break up too-long rcu_torture_fwd_prog() function
rcutorture: Remove cbflood facility
torture: Bring any extra CPUs online during kernel startup
rcutorture: Add call_rcu() flooding forward-progress tests
rcutorture/formal: Replace synchronize_sched() with synchronize_rcu()
tools/kernel.h: Replace synchronize_sched() with synchronize_rcu()
net/decnet: Replace rcu_barrier_bh() with rcu_barrier()
...
single-stepping fixes, improved tracing, various timer and vGIC
fixes
* x86: Processor Tracing virtualization, STIBP support, some correctness fixes,
refactorings and splitting of vmx.c, use the Hyper-V range TLB flush hypercall,
reduce order of vcpu struct, WBNOINVD support, do not use -ftrace for __noclone
functions, nested guest support for PAUSE filtering on AMD, more Hyper-V
enlightenments (direct mode for synthetic timers)
* PPC: nested VFIO
* s390: bugfixes only this time
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJcH0vFAAoJEL/70l94x66Dw/wH/2FZp1YOM5OgiJzgqnXyDbyf
dNEfWo472MtNiLsuf+ZAfJojVIu9cv7wtBfXNzW+75XZDfh/J88geHWNSiZDm3Fe
aM4MOnGG0yF3hQrRQyEHe4IFhGFNERax8Ccv+OL44md9CjYrIrsGkRD08qwb+gNh
P8T/3wJEKwUcVHA/1VHEIM8MlirxNENc78p6JKd/C7zb0emjGavdIpWFUMr3SNfs
CemabhJUuwOYtwjRInyx1y34FzYwW3Ejuc9a9UoZ+COahUfkuxHE8u+EQS7vLVF6
2VGVu5SA0PqgmLlGhHthxLqVgQYo+dB22cRnsLtXlUChtVAq8q9uu5sKzvqEzuE=
=b4Jx
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"ARM:
- selftests improvements
- large PUD support for HugeTLB
- single-stepping fixes
- improved tracing
- various timer and vGIC fixes
x86:
- Processor Tracing virtualization
- STIBP support
- some correctness fixes
- refactorings and splitting of vmx.c
- use the Hyper-V range TLB flush hypercall
- reduce order of vcpu struct
- WBNOINVD support
- do not use -ftrace for __noclone functions
- nested guest support for PAUSE filtering on AMD
- more Hyper-V enlightenments (direct mode for synthetic timers)
PPC:
- nested VFIO
s390:
- bugfixes only this time"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (171 commits)
KVM: x86: Add CPUID support for new instruction WBNOINVD
kvm: selftests: ucall: fix exit mmio address guessing
Revert "compiler-gcc: disable -ftracer for __noclone functions"
KVM: VMX: Move VM-Enter + VM-Exit handling to non-inline sub-routines
KVM: VMX: Explicitly reference RCX as the vmx_vcpu pointer in asm blobs
KVM: x86: Use jmp to invoke kvm_spurious_fault() from .fixup
MAINTAINERS: Add arch/x86/kvm sub-directories to existing KVM/x86 entry
KVM/x86: Use SVM assembly instruction mnemonics instead of .byte streams
KVM/MMU: Flush tlb directly in the kvm_zap_gfn_range()
KVM/MMU: Flush tlb directly in kvm_set_pte_rmapp()
KVM/MMU: Move tlb flush in kvm_set_pte_rmapp() to kvm_mmu_notifier_change_pte()
KVM: Make kvm_set_spte_hva() return int
KVM: Replace old tlb flush function with new one to flush a specified range.
KVM/MMU: Add tlb flush with range helper function
KVM/VMX: Add hv tlb range flush support
x86/hyper-v: Add HvFlushGuestAddressList hypercall support
KVM: Add tlb_remote_flush_with_range callback in kvm_x86_ops
KVM: x86: Disable Intel PT when VMXON in L1 guest
KVM: x86: Set intercept for Intel PT MSRs read/write
KVM: x86: Implement Intel PT MSRs read/write emulation
...
In the end, we ended up with quite a lot more than I expected:
- Support for ARMv8.3 Pointer Authentication in userspace (CRIU and
kernel-side support to come later)
- Support for per-thread stack canaries, pending an update to GCC that
is currently undergoing review
- Support for kexec_file_load(), which permits secure boot of a kexec
payload but also happens to improve the performance of kexec
dramatically because we can avoid the sucky purgatory code from
userspace. Kdump will come later (requires updates to libfdt).
- Optimisation of our dynamic CPU feature framework, so that all
detected features are enabled via a single stop_machine() invocation
- KPTI whitelisting of Cortex-A CPUs unaffected by Meltdown, so that
they can benefit from global TLB entries when KASLR is not in use
- 52-bit virtual addressing for userspace (kernel remains 48-bit)
- Patch in LSE atomics for per-cpu atomic operations
- Custom preempt.h implementation to avoid unconditional calls to
preempt_schedule() from preempt_enable()
- Support for the new 'SB' Speculation Barrier instruction
- Vectorised implementation of XOR checksumming and CRC32 optimisations
- Workaround for Cortex-A76 erratum #1165522
- Improved compatibility with Clang/LLD
- Support for TX2 system PMUS for profiling the L3 cache and DMC
- Reflect read-only permissions in the linear map by default
- Ensure MMIO reads are ordered with subsequent calls to Xdelay()
- Initial support for memory hotplug
- Tweak the threshold when we invalidate the TLB by-ASID, so that
mremap() performance is improved for ranges spanning multiple PMDs.
- Minor refactoring and cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCgAGBQJcE4TmAAoJELescNyEwWM0Nr0H/iaU7/wQSzHyNXtZoImyKTul
Blu2ga4/EqUrTU7AVVfmkl/3NBILWlgQVpY6tH6EfXQuvnxqD7CizbHyLdyO+z0S
B5PsFUH2GLMNAi48AUNqGqkgb2knFbg+T+9IimijDBkKg1G/KhQnRg6bXX32mLJv
Une8oshUPBVJMsHN1AcQknzKariuoE3u0SgJ+eOZ9yA2ZwKxP4yy1SkDt3xQrtI0
lojeRjxcyjTP1oGRNZC+BWUtGOT35p7y6cGTnBd/4TlqBGz5wVAJUcdoxnZ6JYVR
O8+ob9zU+4I0+SKt80s7pTLqQiL9rxkKZ5joWK1pr1g9e0s5N5yoETXKFHgJYP8=
=sYdt
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 festive updates from Will Deacon:
"In the end, we ended up with quite a lot more than I expected:
- Support for ARMv8.3 Pointer Authentication in userspace (CRIU and
kernel-side support to come later)
- Support for per-thread stack canaries, pending an update to GCC
that is currently undergoing review
- Support for kexec_file_load(), which permits secure boot of a kexec
payload but also happens to improve the performance of kexec
dramatically because we can avoid the sucky purgatory code from
userspace. Kdump will come later (requires updates to libfdt).
- Optimisation of our dynamic CPU feature framework, so that all
detected features are enabled via a single stop_machine()
invocation
- KPTI whitelisting of Cortex-A CPUs unaffected by Meltdown, so that
they can benefit from global TLB entries when KASLR is not in use
- 52-bit virtual addressing for userspace (kernel remains 48-bit)
- Patch in LSE atomics for per-cpu atomic operations
- Custom preempt.h implementation to avoid unconditional calls to
preempt_schedule() from preempt_enable()
- Support for the new 'SB' Speculation Barrier instruction
- Vectorised implementation of XOR checksumming and CRC32
optimisations
- Workaround for Cortex-A76 erratum #1165522
- Improved compatibility with Clang/LLD
- Support for TX2 system PMUS for profiling the L3 cache and DMC
- Reflect read-only permissions in the linear map by default
- Ensure MMIO reads are ordered with subsequent calls to Xdelay()
- Initial support for memory hotplug
- Tweak the threshold when we invalidate the TLB by-ASID, so that
mremap() performance is improved for ranges spanning multiple PMDs.
- Minor refactoring and cleanups"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (125 commits)
arm64: kaslr: print PHYS_OFFSET in dump_kernel_offset()
arm64: sysreg: Use _BITUL() when defining register bits
arm64: cpufeature: Rework ptr auth hwcaps using multi_entry_cap_matches
arm64: cpufeature: Reduce number of pointer auth CPU caps from 6 to 4
arm64: docs: document pointer authentication
arm64: ptr auth: Move per-thread keys from thread_info to thread_struct
arm64: enable pointer authentication
arm64: add prctl control for resetting ptrauth keys
arm64: perf: strip PAC when unwinding userspace
arm64: expose user PAC bit positions via ptrace
arm64: add basic pointer authentication support
arm64/cpufeature: detect pointer authentication
arm64: Don't trap host pointer auth use to EL2
arm64/kvm: hide ptrauth from guests
arm64/kvm: consistently handle host HCR_EL2 flags
arm64: add pointer authentication register bits
arm64: add comments about EC exception levels
arm64: perf: Treat EXCLUDE_EL* bit definitions as unsigned
arm64: kpti: Whitelist Cortex-A CPUs that don't implement the CSV3 field
arm64: enable per-task stack canaries
...
This patch is to move tlb flush in kvm_set_pte_rmapp() to
kvm_mmu_notifier_change_pte() in order to avoid redundant tlb flush.
Signed-off-by: Lan Tianyu <Tianyu.Lan@microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The patch is to make kvm_set_spte_hva() return int and caller can
check return value to determine flush tlb or not.
Signed-off-by: Lan Tianyu <Tianyu.Lan@microsoft.com>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
[Preserved the iff and a probably intentional weird bracket notation.
Also dropped the style change to make a single-purpose patch. - Radim]
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Since the offset is added directly to the hva from the
gfn_to_hva_cache, a negative offset could result in an out of bounds
write. The existing BUG_ON only checks for addresses beyond the end of
the gfn_to_hva_cache, not for addresses before the start of the
gfn_to_hva_cache.
Note that all current call sites have non-negative offsets.
Fixes: 4ec6e86362 ("kvm: Introduce kvm_write_guest_offset_cached()")
Reported-by: Cfir Cohen <cfir@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Cfir Cohen <cfir@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Previously, in the case where (gpa + len) wrapped around, the entire
region was not validated, as the comment claimed. It doesn't actually
seem that wraparound should be allowed here at all.
Furthermore, since some callers don't check the return code from this
function, it seems prudent to clear ghc->memslot in the event of an
error.
Fixes: 8f964525a1 ("KVM: Allow cross page reads and writes from cached translations.")
Reported-by: Cfir Cohen <cfir@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Cfir Cohen <cfir@google.com>
Reviewed-by: Marc Orr <marcorr@google.com>
Cc: Andrew Honig <ahonig@google.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
- Large PUD support for HugeTLB
- Single-stepping fixes
- Improved tracing
- Various timer and vgic fixups
-----BEGIN PGP SIGNATURE-----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=SiUI
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-for-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm updates for 4.21
- Large PUD support for HugeTLB
- Single-stepping fixes
- Improved tracing
- Various timer and vgic fixups
32 and 64bit use different symbols to identify the traps.
32bit has a fine grained approach (prefetch abort, data abort and HVC),
while 64bit is pretty happy with just "trap".
This has been fine so far, except that we now need to decode some
of that in tracepoints that are common to both architectures.
Introduce ARM_EXCEPTION_IS_TRAP which abstracts the trap symbols
and make the tracepoint use it.
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
There are two things we need to take care of when we create block
mappings in the stage 2 page tables:
(1) The alignment within a PMD between the host address range and the
guest IPA range must be the same, since otherwise we end up mapping
pages with the wrong offset.
(2) The head and tail of a memory slot may not cover a full block
size, and we have to take care to not map those with block
descriptors, since we could expose memory to the guest that the host
did not intend to expose.
So far, we have been taking care of (1), but not (2), and our commentary
describing (1) was somewhat confusing.
This commit attempts to factor out the checks of both into a common
function, and if we don't pass the check, we won't attempt any PMD
mappings for neither hugetlbfs nor THP.
Note that we used to only check the alignment for THP, not for
hugetlbfs, but as far as I can tell the check needs to be applied to
both scenarios.
Cc: Ralph Palutke <ralph.palutke@fau.de>
Cc: Lukas Braun <koomi@moshbit.net>
Reported-by: Lukas Braun <koomi@moshbit.net>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
We currently only halt the guest when a vCPU messes with the active
state of an SPI. This is perfectly fine for GICv2, but isn't enough
for GICv3, where all vCPUs can access the state of any other vCPU.
Let's broaden the condition to include any GICv3 interrupt that
has an active state (i.e. all but LPIs).
Cc: stable@vger.kernel.org
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
kvm_timer_vcpu_terminate can only be called in two scenarios:
1. As part of cleanup during a failed VCPU create
2. As part of freeing the whole VM (struct kvm refcount == 0)
In the first case, we cannot have programmed any timers or mapped any
IRQs, and therefore we do not have to cancel anything or unmap anything.
In the second case, the VCPU will have gone through kvm_timer_vcpu_put,
which will have canceled the emulated physical timer's hrtimer, and we
do not need to that here as well. We also do not care if the irq is
recorded as mapped or not in the VGIC data structure, because the whole
VM is going away. That leaves us only with having to ensure that we
cancel the bg_timer if we were blocking the last time we called
kvm_timer_vcpu_put().
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
The use of a work queue in the hrtimer expire function for the bg_timer
is a leftover from the time when we would inject interrupts when the
bg_timer expired.
Since we are no longer doing that, we can instead call
kvm_vcpu_wake_up() directly from the hrtimer function and remove all
workqueue functionality from the arch timer code.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
The kvm_exit tracepoint strangely always reported exits as being IRQs.
This seems to be because either the __print_symbolic or the tracepoint
macros use a variable named idx.
Take this chance to update the fields in the tracepoint to reflect the
concepts in the arm64 architecture that we pass to the tracepoint and
move the exception type table to the same location and header files as
the exits code.
We also clear out the exception code to 0 for IRQ exits (which
translates to UNKNOWN in text) to make it slighyly less confusing to
parse the trace output.
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
When checking if there are any pending IRQs for the VM, consider the
active state and priority of the IRQs as well.
Otherwise we could be continuously scheduling a guest hypervisor without
it seeing an IRQ.
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
When using the nospec API, it should be taken into account that:
"...if the CPU speculates past the bounds check then
* array_index_nospec() will clamp the index within the range of [0,
* size)."
The above is part of the header for macro array_index_nospec() in
linux/nospec.h
Now, in this particular case, if intid evaluates to exactly VGIC_MAX_SPI
or to exaclty VGIC_MAX_PRIVATE, the array_index_nospec() macro ends up
returning VGIC_MAX_SPI - 1 or VGIC_MAX_PRIVATE - 1 respectively, instead
of VGIC_MAX_SPI or VGIC_MAX_PRIVATE, which, based on the original logic:
/* SGIs and PPIs */
if (intid <= VGIC_MAX_PRIVATE)
return &vcpu->arch.vgic_cpu.private_irqs[intid];
/* SPIs */
if (intid <= VGIC_MAX_SPI)
return &kvm->arch.vgic.spis[intid - VGIC_NR_PRIVATE_IRQS];
are valid values for intid.
Fix this by calling array_index_nospec() macro with VGIC_MAX_PRIVATE + 1
and VGIC_MAX_SPI + 1 as arguments for its parameter size.
Fixes: 41b87599c7 ("KVM: arm/arm64: vgic: fix possible spectre-v1 in vgic_get_irq()")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
[dropped the SPI part which was fixed separately]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
If you register a kvm_coalesced_mmio_zone with '.pio = 0' but then
unregister it with '.pio = 1', KVM_UNREGISTER_COALESCED_MMIO will try to
unregister it from KVM_PIO_BUS rather than KVM_MMIO_BUS, which is a
no-op. But it frees the kvm_coalesced_mmio_dev anyway, causing a
use-after-free.
Fix it by only unregistering and freeing the zone if the correct value
of 'pio' is provided.
Reported-by: syzbot+f87f60bb6f13f39b54e3@syzkaller.appspotmail.com
Fixes: 0804c849f1 ("kvm/x86 : add coalesced pio support")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SPIs should be checked against the VMs specific configuration, and
not the architectural maximum.
Cc: stable@vger.kernel.org
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
In attempting to re-construct the logic for our stage 2 page table
layout I found the reasoning in the comment explaining how we calculate
the number of levels used for stage 2 page tables a bit backwards.
This commit attempts to clarify the comment, to make it slightly easier
to read without having the Arm ARM open on the right page.
While we're at it, fixup a typo in a comment that was recently changed.
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
To change the active state of an MMIO, halt is requested for all vcpus of
the affected guest before modifying the IRQ state. This is done by calling
cond_resched_lock() in vgic_mmio_change_active(). However interrupts are
disabled at this point and we cannot reschedule a vcpu.
We actually don't need any of this, as kvm_arm_halt_guest ensures that
all the other vcpus are out of the guest. Let's just drop that useless
code.
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Suggested-by: Christoffer Dall <christoffer.dall@arm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
KVM only supports PMD hugepages at stage 2. Now that the various page
handling routines are updated, extend the stage 2 fault handling to
map in PUD hugepages.
Addition of PUD hugepage support enables additional page sizes (e.g.,
1G with 4K granule) which can be useful on cores that support mapping
larger block sizes in the TLB entries.
Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
[ Replace BUG() => WARN_ON(1) for arm32 PUD helpers ]
Signed-off-by: Suzuki Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
In preparation for creating larger hugepages at Stage 2, add support
to the age handling notifiers for PUD hugepages when encountered.
Provide trivial helpers for arm32 to allow sharing code.
Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
[ Replaced BUG() => WARN_ON(1) for arm32 PUD helpers ]
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
In preparation for creating larger hugepages at Stage 2, extend the
access fault handling at Stage 2 to support PUD hugepages when
encountered.
Provide trivial helpers for arm32 to allow sharing of code.
Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
[ Replaced BUG() => WARN_ON(1) in PUD helpers ]
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
In preparation for creating PUD hugepages at stage 2, add support for
detecting execute permissions on PUD page table entries. Faults due to
lack of execute permissions on page table entries is used to perform
i-cache invalidation on first execute.
Provide trivial implementations of arm32 helpers to allow sharing of
code.
Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
[ Replaced BUG() => WARN_ON(1) in arm32 PUD helpers ]
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
In preparation for creating PUD hugepages at stage 2, add support for
write protecting PUD hugepages when they are encountered. Write
protecting guest tables is used to track dirty pages when migrating
VMs.
Also, provide trivial implementations of required kvm_s2pud_* helpers
to allow sharing of code with arm32.
Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
[ Replaced BUG() => WARN_ON() in arm32 pud helpers ]
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Introduce helpers to abstract architectural handling of the conversion
of pfn to page table entries and marking a PMD page table entry as a
block entry.
The helpers are introduced in preparation for supporting PUD hugepages
at stage 2 - which are supported on arm64 but do not exist on arm.
Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Stage 2 fault handler marks a page as executable if it is handling an
execution fault or if it was a permission fault in which case the
executable bit needs to be preserved.
The logic to decide if the page should be marked executable is
duplicated for PMD and PTE entries. To avoid creating another copy
when support for PUD hugepages is introduced refactor the code to
share the checks needed to mark a page table entry as executable.
Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
The code for operations such as marking the pfn as dirty, and
dcache/icache maintenance during stage 2 fault handling is duplicated
between normal pages and PMD hugepages.
Instead of creating another copy of the operations when we introduce
PUD hugepages, let's share them across the different pagesizes.
Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
When restoring the active state from userspace, we don't know which CPU
was the source for the active state, and this is not architecturally
exposed in any of the register state.
Set the active_source to 0 in this case. In the future, we can expand
on this and exposse the information as additional information to
userspace for GICv2 if anyone cares.
Cc: stable@vger.kernel.org
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
We recently addressed a VMID generation race by introducing a read/write
lock around accesses and updates to the vmid generation values.
However, kvm_arch_vcpu_ioctl_run() also calls need_new_vmid_gen() but
does so without taking the read lock.
As far as I can tell, this can lead to the same kind of race:
VM 0, VCPU 0 VM 0, VCPU 1
------------ ------------
update_vttbr (vmid 254)
update_vttbr (vmid 1) // roll over
read_lock(kvm_vmid_lock);
force_vm_exit()
local_irq_disable
need_new_vmid_gen == false //because vmid gen matches
enter_guest (vmid 254)
kvm_arch.vttbr = <PGD>:<VMID 1>
read_unlock(kvm_vmid_lock);
enter_guest (vmid 1)
Which results in running two VCPUs in the same VM with different VMIDs
and (even worse) other VCPUs from other VMs could now allocate clashing
VMID 254 from the new generation as long as VCPU 0 is not exiting.
Attempt to solve this by making sure vttbr is updated before another CPU
can observe the updated VMID generation.
Cc: stable@vger.kernel.org
Fixes: f0cf47d939 "KVM: arm/arm64: Close VMID generation race"
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
When we emulate a guest instruction, we don't advance the hardware
singlestep state machine, and thus the guest will receive a software
step exception after a next instruction which is not emulated by the
host.
We bodge around this in an ad-hoc fashion. Sometimes we explicitly check
whether userspace requested a single step, and fake a debug exception
from within the kernel. Other times, we advance the HW singlestep state
rely on the HW to generate the exception for us. Thus, the observed step
behaviour differs for host and guest.
Let's make this simpler and consistent by always advancing the HW
singlestep state machine when we skip an instruction. Thus we can rely
on the hardware to generate the singlestep exception for us, and never
need to explicitly check for an active-pending step, nor do we need to
fake a debug exception from the guest.
Cc: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
When we emulate an MMIO instruction, we advance the CPU state within
decode_hsr(), before emulating the instruction effects.
Having this logic in decode_hsr() is opaque, and advancing the state
before emulation is problematic. It gets in the way of applying
consistent single-step logic, and it prevents us from being able to fail
an MMIO instruction with a synchronous exception.
Clean this up by only advancing the CPU state *after* the effects of the
instruction are emulated.
Cc: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
There are two problems with KVM_GET_DIRTY_LOG. First, and less important,
it can take kvm->mmu_lock for an extended period of time. Second, its user
can actually see many false positives in some cases. The latter is due
to a benign race like this:
1. KVM_GET_DIRTY_LOG returns a set of dirty pages and write protects
them.
2. The guest modifies the pages, causing them to be marked ditry.
3. Userspace actually copies the pages.
4. KVM_GET_DIRTY_LOG returns those pages as dirty again, even though
they were not written to since (3).
This is especially a problem for large guests, where the time between
(1) and (3) can be substantial. This patch introduces a new
capability which, when enabled, makes KVM_GET_DIRTY_LOG not
write-protect the pages it returns. Instead, userspace has to
explicitly clear the dirty log bits just before using the content
of the page. The new KVM_CLEAR_DIRTY_LOG ioctl can also operate on a
64-page granularity rather than requiring to sync a full memslot;
this way, the mmu_lock is taken for small amounts of time, and
only a small amount of time will pass between write protection
of pages and the sending of their content.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When manual dirty log reprotect will be enabled, kvm_get_dirty_log_protect's
pointer argument will always be false on exit, because no TLB flush is needed
until the manual re-protection operation. Rename it from "is_dirty" to "flush",
which more accurately tells the caller what they have to do with it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
An SVE system is so far the only case where we mandate VHE. As we're
starting to grow this requirements, let's slightly rework the way we
deal with that situation, allowing for easy extension of this check.
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
lockdep_assert_held() is better suited to checking locking requirements,
since it only checks if the current thread holds the lock regardless of
whether someone else does. This is also a step towards possibly removing
spin_is_locked().
Signed-off-by: Lance Roy <ldr709@gmail.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Eric Auger <eric.auger@redhat.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: <kvmarm@lists.cs.columbia.edu>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Revert 5ff7091f5a ("mm, mmu_notifier: annotate mmu notifiers with
blockable invalidate callbacks").
MMU_INVALIDATE_DOES_NOT_BLOCK flags was the only one used and it is no
longer needed since 93065ac753 ("mm, oom: distinguish blockable mode for
mmu notifiers"). We now have a full support for per range !blocking
behavior so we can drop the stop gap workaround which the per notifier
flag was used for.
Link: http://lkml.kernel.org/r/20180827112623.8992-4-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ARM:
- Improved guest IPA space support (32 to 52 bits)
- RAS event delivery for 32bit
- PMU fixes
- Guest entry hardening
- Various cleanups
- Port of dirty_log_test selftest
PPC:
- Nested HV KVM support for radix guests on POWER9. The performance is
much better than with PR KVM. Migration and arbitrary level of
nesting is supported.
- Disable nested HV-KVM on early POWER9 chips that need a particular hardware
bug workaround
- One VM per core mode to prevent potential data leaks
- PCI pass-through optimization
- merge ppc-kvm topic branch and kvm-ppc-fixes to get a better base
s390:
- Initial version of AP crypto virtualization via vfio-mdev
- Improvement for vfio-ap
- Set the host program identifier
- Optimize page table locking
x86:
- Enable nested virtualization by default
- Implement Hyper-V IPI hypercalls
- Improve #PF and #DB handling
- Allow guests to use Enlightened VMCS
- Add migration selftests for VMCS and Enlightened VMCS
- Allow coalesced PIO accesses
- Add an option to perform nested VMCS host state consistency check
through hardware
- Automatic tuning of lapic_timer_advance_ns
- Many fixes, minor improvements, and cleanups
-----BEGIN PGP SIGNATURE-----
iQEcBAABCAAGBQJb0FINAAoJEED/6hsPKofoI60IAJRS3vOAQ9Fav8cJsO1oBHcX
3+NexfnBke1bzrjIR3SUcHKGZbdnVPNZc+Q4JjIbPpPmmOMU5jc9BC1dmd5f4Vzh
BMnQ0yCvgFv3A3fy/Icx1Z8NJppxosdmqdQLrQrNo8aD3cjnqY2yQixdXrAfzLzw
XEgKdIFCCz8oVN/C9TT4wwJn6l9OE7BM5bMKGFy5VNXzMu7t64UDOLbbjZxNgi1g
teYvfVGdt5mH0N7b2GPPWRbJmgnz5ygVVpVNQUEFrdKZoCm6r5u9d19N+RRXAwan
ZYFj10W2T8pJOUf3tryev4V33X7MRQitfJBo4tP5hZfi9uRX89np5zP1CFE7AtY=
=yEPW
-----END PGP SIGNATURE-----
Merge tag 'kvm-4.20-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Radim Krčmář:
"ARM:
- Improved guest IPA space support (32 to 52 bits)
- RAS event delivery for 32bit
- PMU fixes
- Guest entry hardening
- Various cleanups
- Port of dirty_log_test selftest
PPC:
- Nested HV KVM support for radix guests on POWER9. The performance
is much better than with PR KVM. Migration and arbitrary level of
nesting is supported.
- Disable nested HV-KVM on early POWER9 chips that need a particular
hardware bug workaround
- One VM per core mode to prevent potential data leaks
- PCI pass-through optimization
- merge ppc-kvm topic branch and kvm-ppc-fixes to get a better base
s390:
- Initial version of AP crypto virtualization via vfio-mdev
- Improvement for vfio-ap
- Set the host program identifier
- Optimize page table locking
x86:
- Enable nested virtualization by default
- Implement Hyper-V IPI hypercalls
- Improve #PF and #DB handling
- Allow guests to use Enlightened VMCS
- Add migration selftests for VMCS and Enlightened VMCS
- Allow coalesced PIO accesses
- Add an option to perform nested VMCS host state consistency check
through hardware
- Automatic tuning of lapic_timer_advance_ns
- Many fixes, minor improvements, and cleanups"
* tag 'kvm-4.20-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (204 commits)
KVM/nVMX: Do not validate that posted_intr_desc_addr is page aligned
Revert "kvm: x86: optimize dr6 restore"
KVM: PPC: Optimize clearing TCEs for sparse tables
x86/kvm/nVMX: tweak shadow fields
selftests/kvm: add missing executables to .gitignore
KVM: arm64: Safety check PSTATE when entering guest and handle IL
KVM: PPC: Book3S HV: Don't use streamlined entry path on early POWER9 chips
arm/arm64: KVM: Enable 32 bits kvm vcpu events support
arm/arm64: KVM: Rename function kvm_arch_dev_ioctl_check_extension()
KVM: arm64: Fix caching of host MDCR_EL2 value
KVM: VMX: enable nested virtualization by default
KVM/x86: Use 32bit xor to clear registers in svm.c
kvm: x86: Introduce KVM_CAP_EXCEPTION_PAYLOAD
kvm: vmx: Defer setting of DR6 until #DB delivery
kvm: x86: Defer setting of CR2 until #PF delivery
kvm: x86: Add payload operands to kvm_multiple_exception
kvm: x86: Add exception payload fields to kvm_vcpu_events
kvm: x86: Add has_payload and payload to kvm_queued_exception
KVM: Documentation: Fix omission in struct kvm_vcpu_events
KVM: selftests: add Enlightened VMCS test
...
Pull siginfo updates from Eric Biederman:
"I have been slowly sorting out siginfo and this is the culmination of
that work.
The primary result is in several ways the signal infrastructure has
been made less error prone. The code has been updated so that manually
specifying SEND_SIG_FORCED is never necessary. The conversion to the
new siginfo sending functions is now complete, which makes it
difficult to send a signal without filling in the proper siginfo
fields.
At the tail end of the patchset comes the optimization of decreasing
the size of struct siginfo in the kernel from 128 bytes to about 48
bytes on 64bit. The fundamental observation that enables this is by
definition none of the known ways to use struct siginfo uses the extra
bytes.
This comes at the cost of a small user space observable difference.
For the rare case of siginfo being injected into the kernel only what
can be copied into kernel_siginfo is delivered to the destination, the
rest of the bytes are set to 0. For cases where the signal and the
si_code are known this is safe, because we know those bytes are not
used. For cases where the signal and si_code combination is unknown
the bits that won't fit into struct kernel_siginfo are tested to
verify they are zero, and the send fails if they are not.
I made an extensive search through userspace code and I could not find
anything that would break because of the above change. If it turns out
I did break something it will take just the revert of a single change
to restore kernel_siginfo to the same size as userspace siginfo.
Testing did reveal dependencies on preferring the signo passed to
sigqueueinfo over si->signo, so bit the bullet and added the
complexity necessary to handle that case.
Testing also revealed bad things can happen if a negative signal
number is passed into the system calls. Something no sane application
will do but something a malicious program or a fuzzer might do. So I
have fixed the code that performs the bounds checks to ensure negative
signal numbers are handled"
* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (80 commits)
signal: Guard against negative signal numbers in copy_siginfo_from_user32
signal: Guard against negative signal numbers in copy_siginfo_from_user
signal: In sigqueueinfo prefer sig not si_signo
signal: Use a smaller struct siginfo in the kernel
signal: Distinguish between kernel_siginfo and siginfo
signal: Introduce copy_siginfo_from_user and use it's return value
signal: Remove the need for __ARCH_SI_PREABLE_SIZE and SI_PAD_SIZE
signal: Fail sigqueueinfo if si_signo != sig
signal/sparc: Move EMT_TAGOVF into the generic siginfo.h
signal/unicore32: Use force_sig_fault where appropriate
signal/unicore32: Generate siginfo in ucs32_notify_die
signal/unicore32: Use send_sig_fault where appropriate
signal/arc: Use force_sig_fault where appropriate
signal/arc: Push siginfo generation into unhandled_exception
signal/ia64: Use force_sig_fault where appropriate
signal/ia64: Use the force_sig(SIGSEGV,...) in ia64_rt_sigreturn
signal/ia64: Use the generic force_sigsegv in setup_frame
signal/arm/kvm: Use send_sig_mceerr
signal/arm: Use send_sig_fault where appropriate
signal/arm: Use force_sig_fault where appropriate
...
- Core mmu_gather changes which allow tracking the levels of page-table
being cleared together with the arm64 low-level flushing routines
- Support for the new ARMv8.5 PSTATE.SSBS bit which can be used to
mitigate Spectre-v4 dynamically without trapping to EL3 firmware
- Introduce COMPAT_SIGMINSTKSZ for use in compat_sys_sigaltstack
- Optimise emulation of MRS instructions to ID_* registers on ARMv8.4
- Support for Common Not Private (CnP) translations allowing threads of
the same CPU to share the TLB entries
- Accelerated crc32 routines
- Move swapper_pg_dir to the rodata section
- Trap WFI instruction executed in user space
- ARM erratum 1188874 workaround (arch_timer)
- Miscellaneous fixes and clean-ups
-----BEGIN PGP SIGNATURE-----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=3Mc8
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"Apart from some new arm64 features and clean-ups, this also contains
the core mmu_gather changes for tracking the levels of the page table
being cleared and a minor update to the generic
compat_sys_sigaltstack() introducing COMPAT_SIGMINSKSZ.
Summary:
- Core mmu_gather changes which allow tracking the levels of
page-table being cleared together with the arm64 low-level flushing
routines
- Support for the new ARMv8.5 PSTATE.SSBS bit which can be used to
mitigate Spectre-v4 dynamically without trapping to EL3 firmware
- Introduce COMPAT_SIGMINSTKSZ for use in compat_sys_sigaltstack
- Optimise emulation of MRS instructions to ID_* registers on ARMv8.4
- Support for Common Not Private (CnP) translations allowing threads
of the same CPU to share the TLB entries
- Accelerated crc32 routines
- Move swapper_pg_dir to the rodata section
- Trap WFI instruction executed in user space
- ARM erratum 1188874 workaround (arch_timer)
- Miscellaneous fixes and clean-ups"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (78 commits)
arm64: KVM: Guests can skip __install_bp_hardening_cb()s HYP work
arm64: cpufeature: Trap CTR_EL0 access only where it is necessary
arm64: cpufeature: Fix handling of CTR_EL0.IDC field
arm64: cpufeature: ctr: Fix cpu capability check for late CPUs
Documentation/arm64: HugeTLB page implementation
arm64: mm: Use __pa_symbol() for set_swapper_pgd()
arm64: Add silicon-errata.txt entry for ARM erratum 1188873
Revert "arm64: uaccess: implement unsafe accessors"
arm64: mm: Drop the unused cpu parameter
MAINTAINERS: fix bad sdei paths
arm64: mm: Use #ifdef for the __PAGETABLE_P?D_FOLDED defines
arm64: Fix typo in a comment in arch/arm64/mm/kasan_init.c
arm64: xen: Use existing helper to check interrupt status
arm64: Use daifflag_restore after bp_hardening
arm64: daifflags: Use irqflags functions for daifflags
arm64: arch_timer: avoid unused function warning
arm64: Trap WFI executed in userspace
arm64: docs: Document SSBS HWCAP
arm64: docs: Fix typos in ELF hwcaps
arm64/kprobes: remove an extra semicolon in arch_prepare_kprobe
...
The commit 539aee0edb ("KVM: arm64: Share the parts of
get/set events useful to 32bit") shares the get/set events
helper for arm64 and arm32, but forgot to share the cap
extension code.
User space will check whether KVM supports vcpu events by
checking the KVM_CAP_VCPU_EVENTS extension
Acked-by: James Morse <james.morse@arm.com>
Reviewed-by : Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Rename kvm_arch_dev_ioctl_check_extension() to
kvm_arch_vm_ioctl_check_extension(), because it does
not have any relationship with device.
Renaming this function can make code readable.
Cc: James Morse <james.morse@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
At boot time, KVM stashes the host MDCR_EL2 value, but only does this
when the kernel is not running in hyp mode (i.e. is non-VHE). In these
cases, the stashed value of MDCR_EL2.HPMN happens to be zero, which can
lead to CONSTRAINED UNPREDICTABLE behaviour.
Since we use this value to derive the MDCR_EL2 value when switching
to/from a guest, after a guest have been run, the performance counters
do not behave as expected. This has been observed to result in accesses
via PMXEVTYPER_EL0 and PMXEVCNTR_EL0 not affecting the relevant
counters, resulting in events not being counted. In these cases, only
the fixed-purpose cycle counter appears to work as expected.
Fix this by always stashing the host MDCR_EL2 value, regardless of VHE.
Cc: Christopher Dall <christoffer.dall@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: stable@vger.kernel.org
Fixes: 1e947bad0b ("arm64: KVM: Skip HYP setup when already running in HYP")
Tested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
The original comment is little hard to understand.
No functional change, just amend the comment a little.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Coalesced pio is based on coalesced mmio and can be used for some port
like rtc port, pci-host config port and so on.
Specially in case of rtc as coalesced pio, some versions of windows guest
access rtc frequently because of rtc as system tick. guest access rtc like
this: write register index to 0x70, then write or read data from 0x71.
writing 0x70 port is just as index and do nothing else. So we can use
coalesced pio to handle this scene to reduce VM-EXIT time.
When starting and closing a virtual machine, it will access pci-host config
port frequently. So setting these port as coalesced pio can reduce startup
and shutdown time.
without my patch, get the vm-exit time of accessing rtc 0x70 and piix 0xcf8
using perf tools: (guest OS : windows 7 64bit)
IO Port Access Samples Samples% Time% Min Time Max Time Avg time
0x70:POUT 86 30.99% 74.59% 9us 29us 10.75us (+- 3.41%)
0xcf8:POUT 1119 2.60% 2.12% 2.79us 56.83us 3.41us (+- 2.23%)
with my patch
IO Port Access Samples Samples% Time% Min Time Max Time Avg time
0x70:POUT 106 32.02% 29.47% 0us 10us 1.57us (+- 7.38%)
0xcf8:POUT 1065 1.67% 0.28% 0.41us 65.44us 0.66us (+- 10.55%)
Signed-off-by: Peng Hao <peng.hao2@zte.com.cn>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
update_memslots() is only called by __kvm_set_memory_region(), in which
"change" is calculated and indicates how to adjust slots->used_slots
* increase by one if it is KVM_MR_CREATE
* decrease by one if it is KVM_MR_DELETE
* not change for others
This patch adjusts slots->used_slots in update_memslots() based on "change"
value instead of re-calculate those states again.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We can use 'NULL' to represent 'all cpus' case in
kvm_make_vcpus_request_mask() and avoid building vCPU mask with
all vCPUs.
Suggested-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
PageTransCompoundMap() returns true for hugetlbfs and THP
hugepages. This behaviour incorrectly leads to stage 2 faults for
unsupported hugepage sizes (e.g., 64K hugepage with 4K pages) to be
treated as THP faults.
Tighten the check to filter out hugetlbfs pages. This also leads to
consistently mapping all unsupported hugepage sizes as PTE level
entries at stage 2.
Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
Reviewed-by: Suzuki Poulose <suzuki.poulose@arm.com>
Cc: Christoffer Dall <christoffer.dall@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: stable@vger.kernel.org # v4.13+
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
__cpu_init_stage2 doesn't do anything anymore on arm64, and is
totally non-sensical if running VHE (as VHE is 64bit only).
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
VM tends to be a very overloaded term in KVM, so let's keep it
to describe the virtual machine. For the virtual memory setup,
let's use the "stage2" suffix.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
So far we have restricted the IPA size of the VM to the default
value (40bits). Now that we can manage the IPA size per VM and
support dynamic stage2 page tables, we can allow VMs to have
larger IPA. This patch introduces a the maximum IPA size
supported on the host. This is decided by the following factors :
1) Maximum PARange supported by the CPUs - This can be inferred
from the system wide safe value.
2) Maximum PA size supported by the host kernel (48 vs 52)
3) Number of levels in the host page table (as we base our
stage2 tables on the host table helpers).
Since the stage2 page table code is dependent on the stage1
page table, we always ensure that :
Number of Levels at Stage1 >= Number of Levels at Stage2
So we limit the IPA to make sure that the above condition
is satisfied. This will affect the following combinations
of VA_BITS and IPA for different page sizes.
Host configuration | Unsupported IPA ranges
39bit VA, 4K | [44, 48]
36bit VA, 16K | [41, 48]
42bit VA, 64K | [47, 52]
Supporting the above combinations need independent stage2
page table manipulation code, which would need substantial
changes. We could purse the solution independently and
switch the page table code once we have it ready.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Christoffer Dall <cdall@kernel.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Add support for handling 52bit guest physical address to the
VGIC layer. So far we have limited the guest physical address
to 48bits, by explicitly masking the upper bits. This patch
removes the restriction. We do not have to check if the host
supports 52bit as the gpa is always validated during an access.
(e.g, kvm_{read/write}_guest, kvm_is_visible_gfn()).
Also, the ITS table save-restore is also not affected with
the enhancement. The DTE entries already store the bits[51:8]
of the ITT_addr (with a 256byte alignment).
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Christoffer Dall <cdall@kernel.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
[ Macro clean ups, fix PROPBASER and PENDBASER accesses ]
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Right now the stage2 page table for a VM is hard coded, assuming
an IPA of 40bits. As we are about to add support for per VM IPA,
prepare the stage2 page table helpers to accept the kvm instance
to make the right decision for the VM. No functional changes.
Adds stage2_pgd_size(kvm) to replace S2_PGD_SIZE. Also, moves
some of the definitions in arm32 to align with the arm64.
Also drop the _AC() specifier constants wherever possible.
Cc: Christoffer Dall <cdall@kernel.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Allow the arch backends to perform VM specific initialisation.
This will be later used to handle IPA size configuration and per-VM
VTCR configuration on arm64.
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Christoffer Dall <cdall@kernel.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
On a 4-level page table pgd entry can be empty, unlike a 3-level
page table. Remove the spurious WARN_ON() in stage_get_pud().
Acked-by: Christoffer Dall <cdall@kernel.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
So far we have only supported 3 level page table with fixed IPA of
40bits, where PUD is folded. With 4 level page tables, we need
to check if the PUD entry is valid or not. Fix stage2_flush_memslot()
to do this check, before walking down the table.
Acked-by: Christoffer Dall <cdall@kernel.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
This simplifies the code making it clearer what is going on, and
making the siginfo generation easier to maintain.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
We rely on cpufeature framework to detect and enable CNP so for KVM we
need to patch hyp to set CNP bit just before TTBR0_EL2 gets written.
For the guest we encode CNP bit while building vttbr, so we don't need
to bother with that in a world switch.
Reviewed-by: James Morse <james.morse@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
kvm_unmap_hva is long gone, and we only have kvm_unmap_hva_range to
deal with. Drop the now obsolete code.
Fixes: fb1522e099 ("KVM: update to new mmu_notifier semantic v2")
Cc: James Hogan <jhogan@kernel.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
When triggering a CoW, we unmap the RO page via an MMU notifier
(invalidate_range_start), and then populate the new PTE using another
one (change_pte). In the meantime, we'll have copied the old page
into the new one.
The problem is that the data for the new page is sitting in the
cache, and should the guest have an uncached mapping to that page
(or its MMU off), following accesses will bypass the cache.
In a way, this is similar to what happens on a translation fault:
We need to clean the page to the PoC before mapping it. So let's just
do that.
This fixes a KVM unit test regression observed on a HiSilicon platform,
and subsequently reproduced on Seattle.
Fixes: a9c0e12ebe ("KVM: arm/arm64: Only clean the dcache on translation fault")
Cc: stable@vger.kernel.org # v4.16+
Reported-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
optimizations for ARMv8.4 systems, Userspace interface for RAS, Fault
path optimization, Emulated physical timer fixes, Random cleanups
x86: fixes for L1TF, a new test case, non-support for SGX (inject the
right exception in the guest), a lockdep false positive
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJbfXfZAAoJEL/70l94x66DL2QH/RnQZW4OaqVdE3pNvRvaNJGQ
41yk9aErbqPcK25aIKnhs9e3S+e32BhArA1YBwdHXwwuanANYv5W+o3HNTL0UFj7
UG6APKm5DR6kJeUZ3vCfyeZ/ZKxDW0uqf5DXQyHUiAhwLGw2wWYJ9Ttv0m0Q4Fxl
x9HEnK/s+komG93QT+2hIXtZdPiB026yBBqDDPyYiWrweyBagYUHz65p6qaPiOEY
HqOyLYKsgrqCv9U0NLTD9U54IWGFIaxMGgjyRdZTMCIQeGj6dAH7vyfURGOeDHvw
C0OZeEKRbMsHLwzXRBDEZp279pYgS7zafe/hMkr/znaac+j6xNwxpWwqg5Sm0UE=
=5yTH
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull second set of KVM updates from Paolo Bonzini:
"ARM:
- Support for Group0 interrupts in guests
- Cache management optimizations for ARMv8.4 systems
- Userspace interface for RAS
- Fault path optimization
- Emulated physical timer fixes
- Random cleanups
x86:
- fixes for L1TF
- a new test case
- non-support for SGX (inject the right exception in the guest)
- fix lockdep false positive"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (49 commits)
KVM: VMX: fixes for vmentry_l1d_flush module parameter
kvm: selftest: add dirty logging test
kvm: selftest: pass in extra memory when create vm
kvm: selftest: include the tools headers
kvm: selftest: unify the guest port macros
tools: introduce test_and_clear_bit
KVM: x86: SVM: Call x86_spec_ctrl_set_guest/host() with interrupts disabled
KVM: vmx: Inject #UD for SGX ENCLS instruction in guest
KVM: vmx: Add defines for SGX ENCLS exiting
x86/kvm/vmx: Fix coding style in vmx_setup_l1d_flush()
x86: kvm: avoid unused variable warning
KVM: Documentation: rename the capability of KVM_CAP_ARM_SET_SERROR_ESR
KVM: arm/arm64: Skip updating PTE entry if no change
KVM: arm/arm64: Skip updating PMD entry if no change
KVM: arm: Use true and false for boolean values
KVM: arm/arm64: vgic: Do not use spin_lock_irqsave/restore with irq disabled
KVM: arm/arm64: vgic: Move DEBUG_SPINLOCK_BUG_ON to vgic.h
KVM: arm: vgic-v3: Add support for ICC_SGI0R and ICC_ASGI1R accesses
KVM: arm64: vgic-v3: Add support for ICC_SGI0R_EL1 and ICC_ASGI1R_EL1 accesses
KVM: arm/arm64: vgic-v3: Add core support for Group0 SGIs
...
Merge more updates from Andrew Morton:
- the rest of MM
- procfs updates
- various misc things
- more y2038 fixes
- get_maintainer updates
- lib/ updates
- checkpatch updates
- various epoll updates
- autofs updates
- hfsplus
- some reiserfs work
- fatfs updates
- signal.c cleanups
- ipc/ updates
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (166 commits)
ipc/util.c: update return value of ipc_getref from int to bool
ipc/util.c: further variable name cleanups
ipc: simplify ipc initialization
ipc: get rid of ids->tables_initialized hack
lib/rhashtable: guarantee initial hashtable allocation
lib/rhashtable: simplify bucket_table_alloc()
ipc: drop ipc_lock()
ipc/util.c: correct comment in ipc_obtain_object_check
ipc: rename ipcctl_pre_down_nolock()
ipc/util.c: use ipc_rcu_putref() for failues in ipc_addid()
ipc: reorganize initialization of kern_ipc_perm.seq
ipc: compute kern_ipc_perm.id under the ipc lock
init/Kconfig: remove EXPERT from CHECKPOINT_RESTORE
fs/sysv/inode.c: use ktime_get_real_seconds() for superblock stamp
adfs: use timespec64 for time conversion
kernel/sysctl.c: fix typos in comments
drivers/rapidio/devices/rio_mport_cdev.c: remove redundant pointer md
fork: don't copy inconsistent signal handler state to child
signal: make get_signal() return bool
signal: make sigkill_pending() return bool
...
There are several blockable mmu notifiers which might sleep in
mmu_notifier_invalidate_range_start and that is a problem for the
oom_reaper because it needs to guarantee a forward progress so it cannot
depend on any sleepable locks.
Currently we simply back off and mark an oom victim with blockable mmu
notifiers as done after a short sleep. That can result in selecting a new
oom victim prematurely because the previous one still hasn't torn its
memory down yet.
We can do much better though. Even if mmu notifiers use sleepable locks
there is no reason to automatically assume those locks are held. Moreover
majority of notifiers only care about a portion of the address space and
there is absolutely zero reason to fail when we are unmapping an unrelated
range. Many notifiers do really block and wait for HW which is harder to
handle and we have to bail out though.
This patch handles the low hanging fruit.
__mmu_notifier_invalidate_range_start gets a blockable flag and callbacks
are not allowed to sleep if the flag is set to false. This is achieved by
using trylock instead of the sleepable lock for most callbacks and
continue as long as we do not block down the call chain.
I think we can improve that even further because there is a common pattern
to do a range lookup first and then do something about that. The first
part can be done without a sleeping lock in most cases AFAICS.
The oom_reaper end then simply retries if there is at least one notifier
which couldn't make any progress in !blockable mode. A retry loop is
already implemented to wait for the mmap_sem and this is basically the
same thing.
The simplest way for driver developers to test this code path is to wrap
userspace code which uses these notifiers into a memcg and set the hard
limit to hit the oom. This can be done e.g. after the test faults in all
the mmu notifier managed memory and set the hard limit to something really
small. Then we are looking for a proper process tear down.
[akpm@linux-foundation.org: coding style fixes]
[akpm@linux-foundation.org: minor code simplification]
Link: http://lkml.kernel.org/r/20180716115058.5559-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Christian König <christian.koenig@amd.com> # AMD notifiers
Acked-by: Leon Romanovsky <leonro@mellanox.com> # mlx and umem_odp
Reported-by: David Rientjes <rientjes@google.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Mike Marciniszyn <mike.marciniszyn@intel.com>
Cc: Dennis Dalessandro <dennis.dalessandro@intel.com>
Cc: Sudeep Dutt <sudeep.dutt@intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Cc: Dimitri Sivanich <sivanich@sgi.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Support for Group0 interrupts in guests
- Cache management optimizations for ARMv8.4 systems
- Userspace interface for RAS, allowing error retrival and injection
- Fault path optimization
- Emulated physical timer fixes
- Random cleanups
-----BEGIN PGP SIGNATURE-----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=b6+A
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-for-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm updates for 4.19
- Support for Group0 interrupts in guests
- Cache management optimizations for ARMv8.4 systems
- Userspace interface for RAS, allowing error retrival and injection
- Fault path optimization
- Emulated physical timer fixes
- Random cleanups
Pull core signal handling updates from Eric Biederman:
"It was observed that a periodic timer in combination with a
sufficiently expensive fork could prevent fork from every completing.
This contains the changes to remove the need for that restart.
This set of changes is split into several parts:
- The first part makes PIDTYPE_TGID a proper pid type instead
something only for very special cases. The part starts using
PIDTYPE_TGID enough so that in __send_signal where signals are
actually delivered we know if the signal is being sent to a a group
of processes or just a single process.
- With that prep work out of the way the logic in fork is modified so
that fork logically makes signals received while it is running
appear to be received after the fork completes"
* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (22 commits)
signal: Don't send signals to tasks that don't exist
signal: Don't restart fork when signals come in.
fork: Have new threads join on-going signal group stops
fork: Skip setting TIF_SIGPENDING in ptrace_init_task
signal: Add calculate_sigpending()
fork: Unconditionally exit if a fatal signal is pending
fork: Move and describe why the code examines PIDNS_ADDING
signal: Push pid type down into complete_signal.
signal: Push pid type down into __send_signal
signal: Push pid type down into send_signal
signal: Pass pid type into do_send_sig_info
signal: Pass pid type into send_sigio_to_task & send_sigurg_to_task
signal: Pass pid type into group_send_sig_info
signal: Pass pid and pid type into send_sigqueue
posix-timers: Noralize good_sigevent
signal: Use PIDTYPE_TGID to clearly store where file signals will be sent
pid: Implement PIDTYPE_TGID
pids: Move the pgrp and session pid pointers from task_struct to signal_struct
kvm: Don't open code task_pid in kvm_vcpu_ioctl
pids: Compute task_tgid using signal->leader_pid
...
For x86 this brings in PCID emulation and CR3 caching for shadow page
tables, nested VMX live migration, nested VMCS shadowing, an optimized
IPI hypercall, and some optimizations.
ARM will come next week.
There is a semantic conflict because tip also added an .init_platform
callback to kvm.c. Please keep the initializer from this branch,
and add a call to kvmclock_init (added by tip) inside kvm_init_platform
(added here).
Also, there is a backmerge from 4.18-rc6. This is because of a
refactoring that conflicted with a relatively late bugfix and
resulted in a particularly hellish conflict. Because the conflict
was only due to unfortunate timing of the bugfix, I backmerged and
rebased the refactoring rather than force the resolution on you.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJbdwNFAAoJEL/70l94x66DiPEH/1cAGZWGd85Y3yRu1dmTmqiz
kZy0V+WTQ5kyJF4ZsZKKOp+xK7Qxh5e9kLdTo70uPZCHwLu9IaGKN9+dL9Jar3DR
yLPX5bMsL8UUed9g9mlhdaNOquWi7d7BseCOnIyRTolb+cqnM5h3sle0gqXloVrS
UQb4QogDz8+86czqR8tNfazjQRKW/D2HEGD5NDNVY1qtpY+leCDAn9/u6hUT5c6z
EtufgyDh35UN+UQH0e2605gt3nN3nw3FiQJFwFF1bKeQ7k5ByWkuGQI68XtFVhs+
2WfqL3ftERkKzUOy/WoSJX/C9owvhMcpAuHDGOIlFwguNGroZivOMVnACG1AI3I=
=9Mgw
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull first set of KVM updates from Paolo Bonzini:
"PPC:
- minor code cleanups
x86:
- PCID emulation and CR3 caching for shadow page tables
- nested VMX live migration
- nested VMCS shadowing
- optimized IPI hypercall
- some optimizations
ARM will come next week"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (85 commits)
kvm: x86: Set highest physical address bits in non-present/reserved SPTEs
KVM/x86: Use CC_SET()/CC_OUT in arch/x86/kvm/vmx.c
KVM: X86: Implement PV IPIs in linux guest
KVM: X86: Add kvm hypervisor init time platform setup callback
KVM: X86: Implement "send IPI" hypercall
KVM/x86: Move X86_CR4_OSXSAVE check into kvm_valid_sregs()
KVM: x86: Skip pae_root shadow allocation if tdp enabled
KVM/MMU: Combine flushing remote tlb in mmu_set_spte()
KVM: vmx: skip VMWRITE of HOST_{FS,GS}_BASE when possible
KVM: vmx: skip VMWRITE of HOST_{FS,GS}_SEL when possible
KVM: vmx: always initialize HOST_{FS,GS}_BASE to zero during setup
KVM: vmx: move struct host_state usage to struct loaded_vmcs
KVM: vmx: compute need to reload FS/GS/LDT on demand
KVM: nVMX: remove a misleading comment regarding vmcs02 fields
KVM: vmx: rename __vmx_load_host_state() and vmx_save_host_state()
KVM: vmx: add dedicated utility to access guest's kernel_gs_base
KVM: vmx: track host_state.loaded using a loaded_vmcs pointer
KVM: vmx: refactor segmentation code in vmx_save_host_state()
kvm: nVMX: Fix fault priority for VMX operations
kvm: nVMX: Fix fault vector for VMX operation at CPL > 0
...
A bunch of good stuff in here:
- Wire up support for qspinlock, replacing our trusty ticket lock code
- Add an IPI to flush_icache_range() to ensure that stale instructions
fetched into the pipeline are discarded along with the I-cache lines
- Support for the GCC "stackleak" plugin
- Support for restartable sequences, plus an arm64 port for the selftest
- Kexec/kdump support on systems booting with ACPI
- Rewrite of our syscall entry code in C, which allows us to zero the
GPRs on entry from userspace
- Support for chained PMU counters, allowing 64-bit event counters to be
constructed on current CPUs
- Ensure scheduler topology information is kept up-to-date with CPU
hotplug events
- Re-enable support for huge vmalloc/IO mappings now that the core code
has the correct hooks to use break-before-make sequences
- Miscellaneous, non-critical fixes and cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCgAGBQJbbV41AAoJELescNyEwWM0WoEIALhrKtsIn6vqFlSs/w6aDuJL
cMWmFxjTaKLmIq2+cJIdFLOJ3CH80Pu9gB+nEv/k+cZdCTfUVKfRf28HTpmYWsht
bb4AhdHMC7yFW752BHk+mzJspeC8h/2Rm8wMuNVplZ3MkPrwo3vsiuJTofLhVL/y
BihlU3+5sfBvCYIsWnuEZIev+/I/s/qm1ASiqIcKSrFRZP6VTt5f9TC75vFI8seW
7yc3odKb0CArexB8yBjiPNziehctQF42doxQyL45hezLfWw4qdgHOSiwyiOMxEz9
Fwwpp8Tx33SKLNJgqoqYznGW9PhYJ7n2Kslv19uchJrEV+mds82vdDNaWRULld4=
=kQn6
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"A bunch of good stuff in here. Worth noting is that we've pulled in
the x86/mm branch from -tip so that we can make use of the core
ioremap changes which allow us to put down huge mappings in the
vmalloc area without screwing up the TLB. Much of the positive
diffstat is because of the rseq selftest for arm64.
Summary:
- Wire up support for qspinlock, replacing our trusty ticket lock
code
- Add an IPI to flush_icache_range() to ensure that stale
instructions fetched into the pipeline are discarded along with the
I-cache lines
- Support for the GCC "stackleak" plugin
- Support for restartable sequences, plus an arm64 port for the
selftest
- Kexec/kdump support on systems booting with ACPI
- Rewrite of our syscall entry code in C, which allows us to zero the
GPRs on entry from userspace
- Support for chained PMU counters, allowing 64-bit event counters to
be constructed on current CPUs
- Ensure scheduler topology information is kept up-to-date with CPU
hotplug events
- Re-enable support for huge vmalloc/IO mappings now that the core
code has the correct hooks to use break-before-make sequences
- Miscellaneous, non-critical fixes and cleanups"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (90 commits)
arm64: alternative: Use true and false for boolean values
arm64: kexec: Add comment to explain use of __flush_icache_range()
arm64: sdei: Mark sdei stack helper functions as static
arm64, kaslr: export offset in VMCOREINFO ELF notes
arm64: perf: Add cap_user_time aarch64
efi/libstub: Only disable stackleak plugin for arm64
arm64: drop unused kernel_neon_begin_partial() macro
arm64: kexec: machine_kexec should call __flush_icache_range
arm64: svc: Ensure hardirq tracing is updated before return
arm64: mm: Export __sync_icache_dcache() for xen-privcmd
drivers/perf: arm-ccn: Use devm_ioremap_resource() to map memory
arm64: Add support for STACKLEAK gcc plugin
arm64: Add stack information to on_accessible_stack
drivers/perf: hisi: update the sccl_id/ccl_id when MT is supported
arm64: fix ACPI dependencies
rseq/selftests: Add support for arm64
arm64: acpi: fix alignment fault in accessing ACPI
efi/arm: map UEFI memory map even w/o runtime services enabled
efi/arm: preserve early mapping of UEFI memory map longer for BGRT
drivers: acpi: add dependency of EFI for arm64
...
When there is contention on faulting in a particular page table entry
at stage 2, the break-before-make requirement of the architecture can
lead to additional refaulting due to TLB invalidation.
Avoid this by skipping a page table update if the new value of the PTE
matches the previous value.
Cc: stable@vger.kernel.org
Fixes: d5d8184d35 ("KVM: ARM: Memory virtualization setup")
Reviewed-by: Suzuki Poulose <suzuki.poulose@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Contention on updating a PMD entry by a large number of vcpus can lead
to duplicate work when handling stage 2 page faults. As the page table
update follows the break-before-make requirement of the architecture,
it can lead to repeated refaults due to clearing the entry and
flushing the tlbs.
This problem is more likely when -
* there are large number of vcpus
* the mapping is large block mapping
such as when using PMD hugepages (512MB) with 64k pages.
Fix this by skipping the page table update if there is no change in
the entry being updated.
Cc: stable@vger.kernel.org
Fixes: ad361f093c ("KVM: ARM: Support hugetlbfs backed huge pages")
Reviewed-by: Suzuki Poulose <suzuki.poulose@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
kvm_vgic_sync_hwstate is only called with IRQ being disabled.
There is thus no need to call spin_lock_irqsave/restore in
vgic_fold_lr_state and vgic_prune_ap_list.
This patch replace them with the non irq-safe version.
Signed-off-by: Jia He <jia.he@hxt-semitech.com>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
[maz: commit message tidy-up]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
DEBUG_SPINLOCK_BUG_ON can be used with both vgic-v2 and vgic-v3,
so let's move it to vgic.h
Signed-off-by: Jia He <jia.he@hxt-semitech.com>
[maz: commit message tidy-up]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Although vgic-v3 now supports Group0 interrupts, it still doesn't
deal with Group0 SGIs. As usually with the GIC, nothing is simple:
- ICC_SGI1R can signal SGIs of both groups, since GICD_CTLR.DS==1
with KVM (as per 8.1.10, Non-secure EL1 access)
- ICC_SGI0R can only generate Group0 SGIs
- ICC_ASGI1R sees its scope refocussed to generate only Group0
SGIs (as per the note at the bottom of Table 8-14)
We only support Group1 SGIs so far, so no material change.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
We are currently cutting hva_to_pfn_fast short if we do not want an
immediate exit, which is represented by !async && !atomic. However,
this is unnecessary, and __get_user_pages_fast is *much* faster
because the regular get_user_pages takes pmd_lock/pte_lock.
In fact, when many CPUs take a nested vmexit at the same time
the contention on those locks is visible, and this patch removes
about 25% (compared to 4.18) from vmexit.flat on a 16 vCPU
nested guest.
Suggested-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch is to provide a way for platforms to register hv tlb remote
flush callback and this helps to optimize operation of tlb flush
among vcpus for nested virtualization case.
Signed-off-by: Lan Tianyu <Tianyu.Lan@microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the fast CR3 switch mechanism to locklessly change the MMU root
page when switching between L1 and L2. The switch from L2 to L1 should
always go through the fast path, while the switch from L1 to L2 should
go through the fast path if L1's CR3/EPTP for L2 hasn't changed
since the last time.
Signed-off-by: Junaid Shahid <junaids@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAltU8z0eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG5X8H/2fJr7m3k242+t76
sitwvx1eoPqTgryW59dRKm9IuXAGA+AjauvHzaz1QxomeQa50JghGWefD0eiJfkA
1AphQ/24EOiAbbVk084dAI/C2p122dE4D5Fy7CrfLnuouyrbFaZI5STbnrRct7sR
9deeYW0GDHO1Uenp4WDCj0baaqJqaevZ+7GG09DnWpya2nQtSkGBjqn6GpYmrfOU
mqFuxAX8mEOW6cwK16y/vYtnVjuuMAiZ63/OJ8AQ6d6ArGLwAsdn7f8Fn4I4tEr2
L0d3CRLUyegms4++Dmlu05k64buQu46WlPhjCZc5/Ts4kjrNxBuHejj2/jeSnUSt
vJJlibI=
=42a5
-----END PGP SIGNATURE-----
Merge tag 'v4.18-rc6' into HEAD
Pull bug fixes into the KVM development tree to avoid nasty conflicts.
When the VCPU is blocked (for example from WFI) we don't inject the
physical timer interrupt if it should fire while the CPU is blocked, but
instead we just wake up the VCPU and expect kvm_timer_vcpu_load to take
care of injecting the interrupt.
Unfortunately, kvm_timer_vcpu_load() doesn't actually do that, it only
has support to schedule a soft timer if the emulated phys timer is
expected to fire in the future.
Follow the same pattern as kvm_timer_update_state() and update the irq
state after potentially scheduling a soft timer.
Reported-by: Andre Przywara <andre.przywara@arm.com>
Cc: Stable <stable@vger.kernel.org> # 4.15+
Fixes: bbdd52cfcb ("KVM: arm/arm64: Avoid phys timer emulation in vcpu entry/exit")
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
kvm_timer_update_state() is called when changing the phys timer
configuration registers, either via vcpu reset, as a result of a trap
from the guest, or when userspace programs the registers.
phys_timer_emulate() is in turn called by kvm_timer_update_state() to
either cancel an existing software timer, or program a new software
timer, to emulate the behavior of a real phys timer, based on the change
in configuration registers.
Unfortunately, the interaction between these two functions left a small
race; if the conceptual emulated phys timer should actually fire, but
the soft timer hasn't executed its callback yet, we cancel the timer in
phys_timer_emulate without injecting an irq. This only happens if the
check in kvm_timer_update_state is called before the timer should fire,
which is relatively unlikely, but possible.
The solution is to update the state of the phys timer after calling
phys_timer_emulate, which will pick up the pending timer state and
update the interrupt value.
Note that this leaves the opportunity of raising the interrupt twice,
once in the just-programmed soft timer, and once in
kvm_timer_update_state. Since this always happens synchronously with
the VCPU execution, there is no harm in this, and the guest ever only
sees a single timer interrupt.
Cc: Stable <stable@vger.kernel.org> # 4.15+
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
It's possible for userspace to control n. Sanitize n when using it as an
array index, to inhibit the potential spectre-v1 write gadget.
Note that while it appears that n must be bound to the interval [0,3]
due to the way it is extracted from addr, we cannot guarantee that
compiler transformations (and/or future refactoring) will ensure this is
the case, and given this is a slow path it's better to always perform
the masking.
Found by smatch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Christoffer Dall <christoffer.dall@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: kvmarm@lists.cs.columbia.edu
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
arm64's new use of KVMs get_events/set_events API calls isn't just
or RAS, it allows an SError that has been made pending by KVM as
part of its device emulation to be migrated.
Wire this up for 32bit too.
We only need to read/write the HCR_VA bit, and check that no esr has
been provided, as we don't yet support VDFSR.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Dongjiu Geng <gengdongjiu@huawei.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
The get/set events helpers to do some work to check reserved
and padding fields are zero. This is useful on 32bit too.
Move this code into virt/kvm/arm/arm.c, and give the arch
code some underscores.
This is temporarily hidden behind __KVM_HAVE_VCPU_EVENTS until
32bit is wired up.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Dongjiu Geng <gengdongjiu@huawei.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
For the migrating VMs, user space may need to know the exception
state. For example, in the machine A, KVM make an SError pending,
when migrate to B, KVM also needs to pend an SError.
This new IOCTL exports user-invisible states related to SError.
Together with appropriate user space changes, user space can get/set
the SError exception state to do migrate/snapshot/suspend.
Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Reviewed-by: James Morse <james.morse@arm.com>
[expanded documentation wording]
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Simply letting IGROUPR be writable from userspace would break
migration from old kernels to newer kernels, because old kernels
incorrectly report interrupt groups as group 1. This would not be a big
problem if userspace wrote GICD_IIDR as read from the kernel, because we
could detect the incompatibility and return an error to userspace.
Unfortunately, this is not the case with current userspace
implementations and simply letting IGROUPR be writable from userspace for
an emulated GICv2 silently breaks migration and causes the destination
VM to no longer run after migration.
We now encourage userspace to write the read and expected value of
GICD_IIDR as the first part of a GIC register restore, and if we observe
a write to GICD_IIDR we know that userspace has been updated and has had
a chance to cope with older kernels (VGICv2 IIDR.Revision == 0)
incorrectly reporting interrupts as group 1, and therefore we now allow
groups to be user writable.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Implement the required MMIO accessors for GICv2 and GICv3 for the
IGROUPR distributor and redistributor registers.
This can allow guests to change behavior compared to running on previous
versions of KVM, but only to align with the architecture and hardware
implementations.
This also allows userspace to configure the interrupts groups for GICv3.
We don't allow userspace to write the groups on GICv2 just yet, because
that would result in GICv2 guests not receiving interrupts after
migrating from an older kernel that exposes GICv2 interrupts as group 1.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
If userspace attempts to write a GICD_IIDR that does not match the
kernel version, return an error to userspace. The intention is to allow
implementation changes inside KVM while avoiding silently breaking
migration resulting in guests not running without any clear indication
of what went wrong.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Currently we do not allow any vgic mmio write operations to fail, which
makes sense from mmio traps from the guest. However, we should be able
to report failures to userspace, if userspace writes incompatible values
to read-only registers. Rework the internal interface to allow errors
to be returned on the write side for userspace writes.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Now when we have a group configuration on the struct IRQ, use this state
when populating the LR and signaling interrupts as either group 0 or
group 1 to the VM. Depending on the model of the emulated GIC, and the
guest's configuration of the VMCR, interrupts may be signaled as IRQs or
FIQs to the VM.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
In preparation for proper group 0 and group 1 support in the vgic, we
add a field in the struct irq to store the group of all interrupts.
We initialize the group to group 0 when emulating GICv2 and to group 1
when emulating GICv3, just like we treat them today. LPIs are always
group 1. We also continue to ignore writes from the guest, preserving
existing functionality, for now.
Finally, we also add this field to the vgic debug logic to show the
group for all interrupts.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
We currently don't support grouping in the emulated VGIC, which is a
known defect on KVM (not hurting any currently used guests as far as
we're aware). This is currently handled by treating all interrupts as
group 0 interrupts for an emulated GICv2 and always signaling interrupts
as group 0 to the virtual CPU interface.
However, when reading which group interrupts belongs to in the guest
from the emulated VGIC, the VGIC currently reports group 1 instead of
group 0, which is misleading. Fix this temporarily before introducing
full group support by changing the hander to _raz instead of _rao.
Fixes: fb848db396 "KVM: arm/arm64: vgic-new: Add GICv2 MMIO handling framework"
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
As we are about to tweak implementation aspects of the VGIC emulation,
while still preserving some level of backwards compatibility support,
add a field to keep track of the implementation revision field which is
reported to the VM and to userspace.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Instead of hardcoding the shifts and masks in the GICD_IIDR register
emulation, let's add the definition of these fields to the GIC header
files and use them.
This will make things more obvious when we're going to bump the revision
in the IIDR when we'll make guest-visible changes to the implementation.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
The vgic debugfs file only knows about SGI/PPI/SPI interrupts, and
completely ignores LPIs. Let's fix that.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
In the quest to remove all stack VLA usage from the kernel[1], this
switches to using a maximum size and adds sanity checks. Additionally
cleans up some of the int-vs-u32 usage and adds additional bounds checking.
As it currently stands, this will always be 8 bytes until the ABI changes.
[1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com
Cc: Christoffer Dall <christoffer.dall@arm.com>
Cc: Eric Auger <eric.auger@redhat.com>
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: kvmarm@lists.cs.columbia.edu
Signed-off-by: Kees Cook <keescook@chromium.org>
[maz: dropped WARN_ONs]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
The vgic_init function can race with kvm_arch_vcpu_create() which does
not hold kvm_lock() and we therefore have no synchronization primitives
to ensure we're doing the right thing.
As the user is trying to initialize or run the VM while at the same time
creating more VCPUs, we just have to refuse to initialize the VGIC in
this case rather than silently failing with a broken VCPU.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJbTwvXAAoJEL/70l94x66D068H/0lNKsk33AHZGsVOr3qZJNpE
6NI746ZXurRNNZ6d64hVIBDfTI4P3lurjQmb9/GUSwvoHW0S2zMug0F59TKYQ3EO
kcX+b9LRmBkUq2h2R8XXTVkmaZ1SqwvXVVzx80T2cXAD3J3kuX6Yj+z1RO7MrXWI
ZChA3ZT/eqsGEzle+yu/YExAgbv+7xzuBNBaas7QvJE8CHZzPKYjVBEY6DAWx53L
LMq8C3NsHpJhXD6Rcq9DIyrktbDSi+xRBbYsJrhSEe0MfzmgBkkysl86uImQWZxk
/2uHUVz+85IYy3C+ZbagmlSmHm1Civb6VyVNu9K3nRxooVtmmgudsA9VYJRRVx4=
=M0K/
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Miscellaneous bugfixes, plus a small patchlet related to Spectre v2"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvmclock: fix TSC calibration for nested guests
KVM: VMX: Mark VMXArea with revision_id of physical CPU even when eVMCS enabled
KVM: irqfd: fix race between EPOLLHUP and irq_bypass_register_consumer
KVM/Eventfd: Avoid crash when assign and deassign specific eventfd in parallel.
x86/kvmclock: set pvti_cpu0_va after enabling kvmclock
x86/kvm/Kconfig: Ensure CRYPTO_DEV_CCP_DD state at minimum matches KVM_AMD
kvm: nVMX: Restore exit qual for VM-entry failure due to MSR loading
x86/kvm/vmx: don't read current->thread.{fs,gs}base of legacy tasks
KVM: VMX: support MSR_IA32_ARCH_CAPABILITIES as a feature MSR
A comment warning against this bug is there, but the code is not doing what
the comment says. Therefore it is possible that an EPOLLHUP races against
irq_bypass_register_consumer. The EPOLLHUP handler schedules irqfd_shutdown,
and if that runs soon enough, you get a use-after-free.
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Syzbot reports crashes in kvm_irqfd_assign(), caused by use-after-free
when kvm_irqfd_assign() and kvm_irqfd_deassign() run in parallel
for one specific eventfd. When the assign path hasn't finished but irqfd
has been added to kvm->irqfds.items list, another thead may deassign the
eventfd and free struct kvm_kernel_irqfd(). The assign path then uses
the struct kvm_kernel_irqfd that has been freed by deassign path. To avoid
such issue, keep irqfd under kvm->irq_srcu protection after the irqfd
has been added to kvm->irqfds.items list, and call synchronize_srcu()
in irq_shutdown() to make sure that irqfd has been fully initialized in
the assign path.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Tianyu Lan <tianyu.lan@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce a utility function that will be used later on for storage
attributes migration, and use it in kvm_main.c to replace existing code
that does the same thing.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Message-Id: <1525106005-13931-2-git-send-email-imbrenda@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Trapping blocking WFE is extremely beneficial in situations where
the system is oversubscribed, as it allows another thread to run
while being blocked. In a non-oversubscribed environment, this is
the complete opposite, and trapping WFE is just unnecessary overhead.
Let's only enable WFE trapping if the CPU has more than a single task
to run (that is, more than just the vcpu thread).
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
There is no need to perform cache maintenance operations when
creating the HYP page tables if we have the multiprocessing
extensions. ARMv7 mandates them with the virtualization support,
and ARMv8 just mandates them unconditionally.
Let's remove these operations.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
The {pmd,pud,pgd}_populate accessors usage have always been a bit weird
in KVM. We don't have a struct mm to pass (and neither does the kernel
most of the time, but still...), and the 32bit code has all kind of
cache maintenance that doesn't make sense on ARMv7+ when MP extensions
are mandatory (which is the case when the VEs are present).
Let's bite the bullet and provide our own implementations. The only bit
of architectural code left has to do with building the table entry
itself (arm64 having up to 52bit PA, arm lacking PUD level).
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
The arm and arm64 KVM page tables accessors are pointlessly different
between the two architectures, and likely both wrong one way or another:
arm64 lacks a dsb(), and arm doesn't use WRITE_ONCE.
Let's unify them.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Up to ARMv8.3, the combinaison of Stage-1 and Stage-2 attributes
results in the strongest attribute of the two stages. This means
that the hypervisor has to perform quite a lot of cache maintenance
just in case the guest has some non-cacheable mappings around.
ARMv8.4 solves this problem by offering a different mode (FWB) where
Stage-2 has total control over the memory attribute (this is limited
to systems where both I/O and instruction fetches are coherent with
the dcache). This is achieved by having a different set of memory
attributes in the page tables, and a new bit set in HCR_EL2.
On such a system, we can then safely sidestep any form of dcache
management.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Some code cares about the SPSR_ELx format for exceptions taken from
AArch32 to inspect or manipulate the SPSR_ELx value, which is already in
the SPSR_ELx format, and not in the AArch32 PSR format.
To separate these from cases where we care about the AArch32 PSR format,
migrate these cases to use the PSR_AA32_* definitions rather than
COMPAT_PSR_*.
There should be no functional change as a result of this patch.
Note that arm64 KVM does not support a compat KVM API, and always uses
the SPSR_ELx format, even for AArch32 guests.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
There is very little point in trying to support the 32bit KVM/arm API
on arm64, and this was never an anticipated use case.
Let's make it clear by not selecting KVM_COMPAT.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
The current behaviour of the compat ioctls is a bit odd.
We provide a compat_ioctl method when KVM_COMPAT is set, and NULL
otherwise. But NULL means that the normal, non-compat ioctl should
be used directly for compat tasks, and there is no way to actually
prevent a compat task from issueing KVM ioctls.
This patch changes this behaviour, by always registering a compat_ioctl
method, even if KVM_COMPAT is not selected. In that case, the callback
will always return -EINVAL.
Fixes: de8e5d7440 ("KVM: Disable compat ioctl for s390")
Reported-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
There is a panic in armv8a server(QDF2400) under memory pressure tests
(start 20 guests and run memhog in the host).
---------------------------------begin--------------------------------
[35380.800950] BUG: Bad page state in process qemu-kvm pfn:dd0b6
[35380.805825] page:ffff7fe003742d80 count:-4871 mapcount:-2126053375
mapping: (null) index:0x0
[35380.815024] flags: 0x1fffc00000000000()
[35380.818845] raw: 1fffc00000000000 0000000000000000 0000000000000000
ffffecf981470000
[35380.826569] raw: dead000000000100 dead000000000200 ffff8017c001c000
0000000000000000
[35380.805825] page:ffff7fe003742d80 count:-4871 mapcount:-2126053375
mapping: (null) index:0x0
[35380.815024] flags: 0x1fffc00000000000()
[35380.818845] raw: 1fffc00000000000 0000000000000000 0000000000000000
ffffecf981470000
[35380.826569] raw: dead000000000100 dead000000000200 ffff8017c001c000
0000000000000000
[35380.834294] page dumped because: nonzero _refcount
[...]
--------------------------------end--------------------------------------
The root cause might be what was fixed at [1]. But from the KVM points of
view, it would be better if the issue was caught earlier.
If the size is not PAGE_SIZE aligned, unmap_stage2_range might unmap the
wrong(more or less) page range. Hence it caused the "BUG: Bad page
state"
Let's WARN in that case, so that the issue is obvious.
[1] https://lkml.org/lkml/2018/5/3/1042
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: jia.he@hxt-semitech.com
[maz: tidied up commit message]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
When booting a 64 KB pages kernel on a ACPI GICv3 system that
implements support for v2 emulation, the following warning is
produced
GICV size 0x2000 not a multiple of page size 0x10000
and support for v2 emulation is disabled, preventing GICv2 VMs
from being able to run on such hosts.
The reason is that vgic_v3_probe() performs a sanity check on the
size of the window (it should be a multiple of the page size),
while the ACPI MADT parsing code hardcodes the size of the window
to 8 KB. This makes sense, considering that ACPI does not bother
to describe the size in the first place, under the assumption that
platforms implementing ACPI will follow the architecture and not
put anything else in the same 64 KB window.
So let's just drop the sanity check altogether, and assume that
the window is at least 64 KB in size.
Fixes: 9097773245 ("KVM: arm/arm64: vgic-new: vgic_init: implement kvm_vgic_hyp_init")
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
- Additional struct_size() conversions (Matthew, Kees)
- Explicitly reported overflow fixes (Silvio, Kees)
- Add missing kvcalloc() function (Kees)
- Treewide conversions of allocators to use either 2-factor argument
variant when available, or array_size() and array3_size() as needed (Kees)
-----BEGIN PGP SIGNATURE-----
Comment: Kees Cook <kees@outflux.net>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=zUUp
-----END PGP SIGNATURE-----
Merge tag 'overflow-v4.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull more overflow updates from Kees Cook:
"The rest of the overflow changes for v4.18-rc1.
This includes the explicit overflow fixes from Silvio, further
struct_size() conversions from Matthew, and a bug fix from Dan.
But the bulk of it is the treewide conversions to use either the
2-factor argument allocators (e.g. kmalloc(a * b, ...) into
kmalloc_array(a, b, ...) or the array_size() macros (e.g. vmalloc(a *
b) into vmalloc(array_size(a, b)).
Coccinelle was fighting me on several fronts, so I've done a bunch of
manual whitespace updates in the patches as well.
Summary:
- Error path bug fix for overflow tests (Dan)
- Additional struct_size() conversions (Matthew, Kees)
- Explicitly reported overflow fixes (Silvio, Kees)
- Add missing kvcalloc() function (Kees)
- Treewide conversions of allocators to use either 2-factor argument
variant when available, or array_size() and array3_size() as needed
(Kees)"
* tag 'overflow-v4.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (26 commits)
treewide: Use array_size in f2fs_kvzalloc()
treewide: Use array_size() in f2fs_kzalloc()
treewide: Use array_size() in f2fs_kmalloc()
treewide: Use array_size() in sock_kmalloc()
treewide: Use array_size() in kvzalloc_node()
treewide: Use array_size() in vzalloc_node()
treewide: Use array_size() in vzalloc()
treewide: Use array_size() in vmalloc()
treewide: devm_kzalloc() -> devm_kcalloc()
treewide: devm_kmalloc() -> devm_kmalloc_array()
treewide: kvzalloc() -> kvcalloc()
treewide: kvmalloc() -> kvmalloc_array()
treewide: kzalloc_node() -> kcalloc_node()
treewide: kzalloc() -> kcalloc()
treewide: kmalloc() -> kmalloc_array()
mm: Introduce kvcalloc()
video: uvesafb: Fix integer overflow in allocation
UBIFS: Fix potential integer overflow in allocation
leds: Use struct_size() in allocation
Convert intel uncore to struct_size
...
* ARM: lazy context-switching of FPSIMD registers on arm64, "split"
regions for vGIC redistributor
* s390: cleanups for nested, clock handling, crypto, storage keys and
control register bits
* x86: many bugfixes, implement more Hyper-V super powers,
implement lapic_timer_advance_ns even when the LAPIC timer
is emulated using the processor's VMX preemption timer. Two
security-related bugfixes at the top of the branch.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJbH8Z/AAoJEL/70l94x66DF+UIAJeOuTp6LGasT/9uAb2OovaN
+5kGmOPGFwkTcmg8BQHI2fXT4vhxMXWPFcQnyig9eXJVxhuwluXDOH4P9IMay0yw
VDCBsWRdMvZDQad2hn6Z5zR4Jx01XrSaG/KqvXbbDKDCy96mWG7SYAY2m3ZwmeQi
3Pa3O3BTijr7hBYnMhdXGkSn4ZyU8uPaAgIJ8795YKeOJ2JmioGYk6fj6y2WCxA3
ztJymBjTmIoZ/F8bjuVouIyP64xH4q9roAyw4rpu7vnbWGqx1fjPYJoB8yddluWF
JqCPsPzhKDO7mjZJy+lfaxIlzz2BN7tKBNCm88s5GefGXgZwk3ByAq/0GQ2M3rk=
=H5zI
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"Small update for KVM:
ARM:
- lazy context-switching of FPSIMD registers on arm64
- "split" regions for vGIC redistributor
s390:
- cleanups for nested
- clock handling
- crypto
- storage keys
- control register bits
x86:
- many bugfixes
- implement more Hyper-V super powers
- implement lapic_timer_advance_ns even when the LAPIC timer is
emulated using the processor's VMX preemption timer.
- two security-related bugfixes at the top of the branch"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (79 commits)
kvm: fix typo in flag name
kvm: x86: use correct privilege level for sgdt/sidt/fxsave/fxrstor access
KVM: x86: pass kvm_vcpu to kvm_read_guest_virt and kvm_write_guest_virt_system
KVM: x86: introduce linear_{read,write}_system
kvm: nVMX: Enforce cpl=0 for VMX instructions
kvm: nVMX: Add support for "VMWRITE to any supported field"
kvm: nVMX: Restrict VMX capability MSR changes
KVM: VMX: Optimize tscdeadline timer latency
KVM: docs: nVMX: Remove known limitations as they do not exist now
KVM: docs: mmu: KVM support exposing SLAT to guests
kvm: no need to check return value of debugfs_create functions
kvm: Make VM ioctl do valloc for some archs
kvm: Change return type to vm_fault_t
KVM: docs: mmu: Fix link to NPT presentation from KVM Forum 2008
kvm: x86: Amend the KVM_GET_SUPPORTED_CPUID API documentation
KVM: x86: hyperv: declare KVM_CAP_HYPERV_TLBFLUSH capability
KVM: x86: hyperv: simplistic HVCALL_FLUSH_VIRTUAL_ADDRESS_{LIST,SPACE}_EX implementation
KVM: x86: hyperv: simplistic HVCALL_FLUSH_VIRTUAL_ADDRESS_{LIST,SPACE} implementation
KVM: introduce kvm_make_vcpus_request_mask() API
KVM: x86: hyperv: do rep check for each hypercall separately
...
- Spectre v4 mitigation (Speculative Store Bypass Disable) support for
arm64 using SMC firmware call to set a hardware chicken bit
- ACPI PPTT (Processor Properties Topology Table) parsing support and
enable the feature for arm64
- Report signal frame size to user via auxv (AT_MINSIGSTKSZ). The
primary motivation is Scalable Vector Extensions which requires more
space on the signal frame than the currently defined MINSIGSTKSZ
- ARM perf patches: allow building arm-cci as module, demote dev_warn()
to dev_dbg() in arm-ccn event_init(), miscellaneous cleanups
- cmpwait() WFE optimisation to avoid some spurious wakeups
- L1_CACHE_BYTES reverted back to 64 (for performance reasons that have
to do with some network allocations) while keeping ARCH_DMA_MINALIGN
to 128. cache_line_size() returns the actual hardware Cache Writeback
Granule
- Turn LSE atomics on by default in Kconfig
- Kernel fault reporting tidying
- Some #include and miscellaneous cleanups
-----BEGIN PGP SIGNATURE-----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=uums
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"Apart from the core arm64 and perf changes, the Spectre v4 mitigation
touches the arm KVM code and the ACPI PPTT support touches drivers/
(acpi and cacheinfo). I should have the maintainers' acks in place.
Summary:
- Spectre v4 mitigation (Speculative Store Bypass Disable) support
for arm64 using SMC firmware call to set a hardware chicken bit
- ACPI PPTT (Processor Properties Topology Table) parsing support and
enable the feature for arm64
- Report signal frame size to user via auxv (AT_MINSIGSTKSZ). The
primary motivation is Scalable Vector Extensions which requires
more space on the signal frame than the currently defined
MINSIGSTKSZ
- ARM perf patches: allow building arm-cci as module, demote
dev_warn() to dev_dbg() in arm-ccn event_init(), miscellaneous
cleanups
- cmpwait() WFE optimisation to avoid some spurious wakeups
- L1_CACHE_BYTES reverted back to 64 (for performance reasons that
have to do with some network allocations) while keeping
ARCH_DMA_MINALIGN to 128. cache_line_size() returns the actual
hardware Cache Writeback Granule
- Turn LSE atomics on by default in Kconfig
- Kernel fault reporting tidying
- Some #include and miscellaneous cleanups"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (53 commits)
arm64: Fix syscall restarting around signal suppressed by tracer
arm64: topology: Avoid checking numa mask for scheduler MC selection
ACPI / PPTT: fix build when CONFIG_ACPI_PPTT is not enabled
arm64: cpu_errata: include required headers
arm64: KVM: Move VCPU_WORKAROUND_2_FLAG macros to the top of the file
arm64: signal: Report signal frame size to userspace via auxv
arm64/sve: Thin out initialisation sanity-checks for sve_max_vl
arm64: KVM: Add ARCH_WORKAROUND_2 discovery through ARCH_FEATURES_FUNC_ID
arm64: KVM: Handle guest's ARCH_WORKAROUND_2 requests
arm64: KVM: Add ARCH_WORKAROUND_2 support for guests
arm64: KVM: Add HYP per-cpu accessors
arm64: ssbd: Add prctl interface for per-thread mitigation
arm64: ssbd: Introduce thread flag to control userspace mitigation
arm64: ssbd: Restore mitigation status on CPU resume
arm64: ssbd: Skip apply_ssbd if not using dynamic mitigation
arm64: ssbd: Add global mitigation state accessor
arm64: Add 'ssbd' command-line option
arm64: Add ARCH_WORKAROUND_2 probing
arm64: Add per-cpu infrastructure to call ARCH_WORKAROUND_2
arm64: Call ARCH_WORKAROUND_2 on transitions between EL0 and EL1
...
Pull siginfo updates from Eric Biederman:
"This set of changes close the known issues with setting si_code to an
invalid value, and with not fully initializing struct siginfo. There
remains work to do on nds32, arc, unicore32, powerpc, arm, arm64, ia64
and x86 to get the code that generates siginfo into a simpler and more
maintainable state. Most of that work involves refactoring the signal
handling code and thus careful code review.
Also not included is the work to shrink the in kernel version of
struct siginfo. That depends on getting the number of places that
directly manipulate struct siginfo under control, as it requires the
introduction of struct kernel_siginfo for the in kernel things.
Overall this set of changes looks like it is making good progress, and
with a little luck I will be wrapping up the siginfo work next
development cycle"
* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (46 commits)
signal/sh: Stop gcc warning about an impossible case in do_divide_error
signal/mips: Report FPE_FLTUNK for undiagnosed floating point exceptions
signal/um: More carefully relay signals in relay_signal.
signal: Extend siginfo_layout with SIL_FAULT_{MCEERR|BNDERR|PKUERR}
signal: Remove unncessary #ifdef SEGV_PKUERR in 32bit compat code
signal/signalfd: Add support for SIGSYS
signal/signalfd: Remove __put_user from signalfd_copyinfo
signal/xtensa: Use force_sig_fault where appropriate
signal/xtensa: Consistenly use SIGBUS in do_unaligned_user
signal/um: Use force_sig_fault where appropriate
signal/sparc: Use force_sig_fault where appropriate
signal/sparc: Use send_sig_fault where appropriate
signal/sh: Use force_sig_fault where appropriate
signal/s390: Use force_sig_fault where appropriate
signal/riscv: Replace do_trap_siginfo with force_sig_fault
signal/riscv: Use force_sig_fault where appropriate
signal/parisc: Use force_sig_fault where appropriate
signal/parisc: Use force_sig_mceerr where appropriate
signal/openrisc: Use force_sig_fault where appropriate
signal/nios2: Use force_sig_fault where appropriate
...
Pull aio updates from Al Viro:
"Majority of AIO stuff this cycle. aio-fsync and aio-poll, mostly.
The only thing I'm holding back for a day or so is Adam's aio ioprio -
his last-minute fixup is trivial (missing stub in !CONFIG_BLOCK case),
but let it sit in -next for decency sake..."
* 'work.aio-1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits)
aio: sanitize the limit checking in io_submit(2)
aio: fold do_io_submit() into callers
aio: shift copyin of iocb into io_submit_one()
aio_read_events_ring(): make a bit more readable
aio: all callers of aio_{read,write,fsync,poll} treat 0 and -EIOCBQUEUED the same way
aio: take list removal to (some) callers of aio_complete()
aio: add missing break for the IOCB_CMD_FDSYNC case
random: convert to ->poll_mask
timerfd: convert to ->poll_mask
eventfd: switch to ->poll_mask
pipe: convert to ->poll_mask
crypto: af_alg: convert to ->poll_mask
net/rxrpc: convert to ->poll_mask
net/iucv: convert to ->poll_mask
net/phonet: convert to ->poll_mask
net/nfc: convert to ->poll_mask
net/caif: convert to ->poll_mask
net/bluetooth: convert to ->poll_mask
net/sctp: convert to ->poll_mask
net/tipc: convert to ->poll_mask
...
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
This cleans up the error handling a lot, as this code will never get
hit.
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Christoffer Dall <christoffer.dall@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim KrÄmář" <rkrcmar@redhat.com>
Cc: Arvind Yadav <arvind.yadav.cs@gmail.com>
Cc: Eric Auger <eric.auger@redhat.com>
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: kvm-ppc@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: kvmarm@lists.cs.columbia.edu
Cc: kvm@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The kvm struct has been bloating. For example, it's tens of kilo-bytes
for x86, which turns out to be a large amount of memory to allocate
contiguously via kzalloc. Thus, this patch does the following:
1. Uses architecture-specific routines to allocate the kvm struct via
vzalloc for x86.
2. Switches arm to __KVM_HAVE_ARCH_VM_ALLOC so that it can use vzalloc
when has_vhe() is true.
Other architectures continue to default to kalloc, as they have a
dependency on kalloc or have a small-enough struct kvm.
Signed-off-by: Marc Orr <marcorr@google.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use new return type vm_fault_t for fault handler. For
now, this is just documenting that the function returns
a VM_FAULT value rather than an errno. Once all instances
are converted, vm_fault_t will become a distinct type.
commit 1c8f422059 ("mm: change return type to vm_fault_t")
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Lazy context-switching of FPSIMD registers on arm64
- Allow virtual redistributors to be part of two or more MMIO ranges
-----BEGIN PGP SIGNATURE-----
iQJJBAABCAAzFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAlsRY14VHG1hcmMuenlu
Z2llckBhcm0uY29tAAoJECPQ0LrRPXpDMGwP/A3FDrzGSjgC65m037/dsQj/Eniv
NkpueEVO3Z8UN44j0TNdeUzj6vQD376GVDwnW3mFlQ416A4ZwwHkk8cQhbpP2UvQ
EqKKUgujvLueZeuAwYG/DtrR9VZ6fh7QLD7Mv8DW/0AaNdBN2LyHEkW0qx7cSXqu
PijTsImj9B8TSykYc0SlJz7Q7Y5QUOYbWrJqqa1cskOdmpN2ATInnA2haXeO7j8v
lkb+WZ9R6xiJSzMCeLEzFV6tUvTiaSw5lVL64jpJhbkBNWPIVAza0erm9TSlQaTw
d3uJlAy0W9UkXSSqvbmtXvBFqCyEOzZ0hwi2MF6RoVuFt1yXwLgHGps6OUkho4Kq
pXWImaRHwxyQGrOY0qm0cxr+6TjYnjn8rIOzmzBOrKKq+aCIQ+Sl+CtNYzczQYeE
rOFBQFsMlzSRJWyabUjhBGFNfDmZZaVFKnUekEqXXETtLxzLZtx+W9i4tzoA1stv
y0+4yAjEyOQoRsAAE3GmzpDsu7Eu2sae6+lTo7DX1y+A7Wi94HKmy47sVjrS+evV
2SLyVZ4mhwMzaQ7ngrjHLD1GXDlBxxk2X+NSmBVe5z4AsuWeoqy81f0rgjyCQNxo
swEqs0k7mMDo8GQNjawwzhdDuHYm4gTX5iGs/Nxx6K4OoJ0bgv83yb/goArp+LEU
/QWT4T37A/pEEECe
=DUmC
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-for-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/ARM updates for 4.18
- Lazy context-switching of FPSIMD registers on arm64
- Allow virtual redistributors to be part of two or more MMIO ranges
Now that all our infrastructure is in place, let's expose the
availability of ARCH_WORKAROUND_2 to guests. We take this opportunity
to tidy up a couple of SMCCC constants.
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
In order to offer ARCH_WORKAROUND_2 support to guests, we need
a bit of infrastructure.
Let's add a flag indicating whether or not the guest uses
SSBD mitigation. Depending on the state of this flag, allow
KVM to disable ARCH_WORKAROUND_2 before entering the guest,
and enable it when exiting it.
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Hyper-V style PV TLB flush hypercalls inmplementation will use this API.
To avoid memory allocation in CONFIG_CPUMASK_OFFSTACK case add
cpumask_var_t argument.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
These abstract out calls to the poll method in preparation for changes
in how we poll.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Now all the internals are ready to handle multiple redistributor
regions, let's allow the userspace to register them.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
On vcpu first run, we eventually know the actual number of vcpus.
This is a synchronization point to check all redistributors
were assigned. On kvm_vgic_map_resources() we check both dist and
redist were set, eventually check potential base address inconsistencies.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
As we are going to register several redist regions,
vgic_register_all_redist_iodevs() may be called several times. We need
to register a redist_iodev for a given vcpu only once. So let's
check if the base address has already been set. Initialize this latter
in kvm_vgic_vcpu_init().
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
kvm_vgic_vcpu_early_init gets called after kvm_vgic_cpu_init which
is confusing. The call path is as follows:
kvm_vm_ioctl_create_vcpu
|_ kvm_arch_cpu_create
|_ kvm_vcpu_init
|_ kvm_arch_vcpu_init
|_ kvm_vgic_vcpu_init
|_ kvm_arch_vcpu_postcreate
|_ kvm_vgic_vcpu_early_init
Static initialization currently done in kvm_vgic_vcpu_early_init()
can be moved to kvm_vgic_vcpu_init(). So let's move the code and
remove kvm_vgic_vcpu_early_init(). kvm_arch_vcpu_postcreate() does
nothing.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
We introduce a new helper that creates and inserts a new redistributor
region into the rdist region list. This helper both handles the case
where the redistributor region size is known at registration time
and the legacy case where it is not (eventually depending on the number
of online vcpus). Depending on pfns, we perform all the possible checks
that we can do:
- end of memory crossing
- incorrect alignment of the base address
- collision with distributor region if already defined
- collision with already registered rdist regions
- check of the new index
Rdist regions must be inserted by increasing order of indices. Indices
must be contiguous.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
vgic_v3_check_base() currently only handles the case of a unique
legacy redistributor region whose size is not explicitly set but
inferred, instead, from the number of online vcpus.
We adapt it to handle the case of multiple redistributor regions
with explicitly defined size. We rely on two new helpers:
- vgic_v3_rdist_overlap() is used to detect overlap with the dist
region if defined
- vgic_v3_rd_region_size computes the size of the redist region,
would it be a legacy unique region or a new explicitly sized
region.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
The TYPER of an redistributor reflects whether the rdist is
the last one of the redistributor region. Let's compare the TYPER
GPA against the address of the last occupied slot within the
redistributor region.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
We introduce vgic_v3_rdist_free_slot to help identifying
where we can place a new 2x64KB redistributor.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
At the moment KVM supports a single rdist region. We want to
support several separate rdist regions so let's introduce a list
of them. This patch currently only cares about a single
entry in this list as the functionality to register several redist
regions is not yet there. So this only translates the existing code
into something functionally similar using that new data struct.
The redistributor region handle is stored in the vgic_cpu structure
to allow later computation of the TYPER last bit.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
in case kvm_vgic_map_resources() fails, typically if the vgic
distributor is not defined, __kvm_vgic_destroy will be called
several times. Indeed kvm_vgic_map_resources() is called on
first vcpu run. As a result dist->spis is freeed more than once
and on the second time it causes a "kernel BUG at mm/slub.c:3912!"
Set dist->spis to NULL to avoid the crash.
Fixes: ad275b8bb1 ("KVM: arm/arm64: vgic-new: vgic_init: implement
vgic_init")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Now that the host SVE context can be saved on demand from Hyp,
there is no longer any need to save this state in advance before
entering the guest.
This patch removes the relevant call to
kvm_fpsimd_flush_cpu_state().
Since the problem that function was intended to solve now no longer
exists, the function and its dependencies are also deleted.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
This patch adds SVE context saving to the hyp FPSIMD context switch
path. This means that it is no longer necessary to save the host
SVE state in advance of entering the guest, when in use.
In order to avoid adding pointless complexity to the code, VHE is
assumed if SVE is in use. VHE is an architectural prerequisite for
SVE, so there is no good reason to turn CONFIG_ARM64_VHE off in
kernels that support both SVE and KVM.
Historically, software models exist that can expose the
architecturally invalid configuration of SVE without VHE, so if
this situation is detected at kvm_init() time then KVM will be
disabled.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
This patch refactors KVM to align the host and guest FPSIMD
save/restore logic with each other for arm64. This reduces the
number of redundant save/restore operations that must occur, and
reduces the common-case IRQ blackout time during guest exit storms
by saving the host state lazily and optimising away the need to
restore the host state before returning to the run loop.
Four hooks are defined in order to enable this:
* kvm_arch_vcpu_run_map_fp():
Called on PID change to map necessary bits of current to Hyp.
* kvm_arch_vcpu_load_fp():
Set up FP/SIMD for entering the KVM run loop (parse as
"vcpu_load fp").
* kvm_arch_vcpu_ctxsync_fp():
Get FP/SIMD into a safe state for re-enabling interrupts after a
guest exit back to the run loop.
For arm64 specifically, this involves updating the host kernel's
FPSIMD context tracking metadata so that kernel-mode NEON use
will cause the vcpu's FPSIMD state to be saved back correctly
into the vcpu struct. This must be done before re-enabling
interrupts because kernel-mode NEON may be used by softirqs.
* kvm_arch_vcpu_put_fp():
Save guest FP/SIMD state back to memory and dissociate from the
CPU ("vcpu_put fp").
Also, the arm64 FPSIMD context switch code is updated to enable it
to save back FPSIMD state for a vcpu, not just current. A few
helpers drive this:
* fpsimd_bind_state_to_cpu(struct user_fpsimd_state *fp):
mark this CPU as having context fp (which may belong to a vcpu)
currently loaded in its registers. This is the non-task
equivalent of the static function fpsimd_bind_to_cpu() in
fpsimd.c.
* task_fpsimd_save():
exported to allow KVM to save the guest's FPSIMD state back to
memory on exit from the run loop.
* fpsimd_flush_state():
invalidate any context's FPSIMD state that is currently loaded.
Used to disassociate the vcpu from the CPU regs on run loop exit.
These changes allow the run loop to enable interrupts (and thus
softirqs that may use kernel-mode NEON) without having to save the
guest's FPSIMD state eagerly.
Some new vcpu_arch fields are added to make all this work. Because
host FPSIMD state can now be saved back directly into current's
thread_struct as appropriate, host_cpu_context is no longer used
for preserving the FPSIMD state. However, it is still needed for
preserving other things such as the host's system registers. To
avoid ABI churn, the redundant storage space in host_cpu_context is
not removed for now.
arch/arm is not addressed by this patch and continues to use its
current save/restore logic. It could provide implementations of
the helpers later if desired.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
KVM/ARM differs from other architectures in having to maintain an
additional virtual address space from that of the host and the
guest, because we split the execution of KVM across both EL1 and
EL2.
This results in a need to explicitly map data structures into EL2
(hyp) which are accessed from the hyp code. As we are about to be
more clever with our FPSIMD handling on arm64, which stores data in
the task struct and uses thread_info flags, we will have to map
parts of the currently executing task struct into the EL2 virtual
address space.
However, we don't want to do this on every KVM_RUN, because it is a
fairly expensive operation to walk the page tables, and the common
execution mode is to map a single thread to a VCPU. By introducing
a hook that architectures can select with
HAVE_KVM_VCPU_RUN_PID_CHANGE, we do not introduce overhead for
other architectures, but have a simple way to only map the data we
need when required for arm64.
This patch introduces the framework only, and wires it up in the
arm/arm64 KVM common code.
No functional change.
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
kvm_read_guest() will eventually look up in kvm_memslots(), which requires
either to hold the kvm->slots_lock or to be inside a kvm->srcu critical
section.
In contrast to x86 and s390 we don't take the SRCU lock on every guest
exit, so we have to do it individually for each kvm_read_guest() call.
Use the newly introduced wrapper for that.
Cc: Stable <stable@vger.kernel.org> # 4.12+
Reported-by: Jan Glauber <jan.glauber@caviumnetworks.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_read_guest() will eventually look up in kvm_memslots(), which requires
either to hold the kvm->slots_lock or to be inside a kvm->srcu critical
section.
In contrast to x86 and s390 we don't take the SRCU lock on every guest
exit, so we have to do it individually for each kvm_read_guest() call.
Provide a wrapper which does that and use that everywhere.
Note that ending the SRCU critical section before returning from the
kvm_read_guest() wrapper is safe, because the data has been *copied*, so
we don't need to rely on valid references to the memslot anymore.
Cc: Stable <stable@vger.kernel.org> # 4.8+
Reported-by: Jan Glauber <jan.glauber@caviumnetworks.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Apparently the development of update_affinity() overlapped with the
promotion of irq_lock to be _irqsave, so the patch didn't convert this
lock over. This will make lockdep complain.
Fix this by disabling IRQs around the lock.
Cc: stable@vger.kernel.org
Fixes: 08c9fd0421 ("KVM: arm/arm64: vITS: Add a helper to update the affinity of an LPI")
Reported-by: Jan Glauber <jan.glauber@caviumnetworks.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As Jan reported [1], lockdep complains about the VGIC not being bullet
proof. This seems to be due to two issues:
- When commit 006df0f349 ("KVM: arm/arm64: Support calling
vgic_update_irq_pending from irq context") promoted irq_lock and
ap_list_lock to _irqsave, we forgot two instances of irq_lock.
lockdeps seems to pick those up.
- If a lock is _irqsave, any other locks we take inside them should be
_irqsafe as well. So the lpi_list_lock needs to be promoted also.
This fixes both issues by simply making the remaining instances of those
locks _irqsave.
One irq_lock is addressed in a separate patch, to simplify backporting.
[1] http://lists.infradead.org/pipermail/linux-arm-kernel/2018-May/575718.html
Cc: stable@vger.kernel.org
Fixes: 006df0f349 ("KVM: arm/arm64: Support calling vgic_update_irq_pending from irq context")
Reported-by: Jan Glauber <jan.glauber@caviumnetworks.com>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Fix proxying of GICv2 CPU interface accesses
- Fix crash when switching to BE
- Track source vcpu git GICv2 SGIs
- Fix an outdated bit of documentation
-----BEGIN PGP SIGNATURE-----
iQJJBAABCAAzFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAlrshkYVHG1hcmMuenlu
Z2llckBhcm0uY29tAAoJECPQ0LrRPXpDK4sQAMkwRaenPNbph+IdohrZo7Px8HKR
bFlz0Qyj4ksy0dNd2jVbCO/s2LgJndYKhuYWx/geVZW0Clx6GiBP53rrXbMhtkRV
PvX2g9nk74OHhI80z9iyKmyt7nKOItiZTkKK6UQqXe91oZqiT5jx8G5N6Zv4DUvm
+4nyNb7nP1VMimLpa5w5CFjL3nbX/VVSdHNMGmbZwDuQ2wrP3d3mfKEtSRBmIBC+
MTjV1DJxIluiIsg0hQvnnV+rTRScj0y36DzsS0th/c2BmzeYBWN/RKmQHdn1OyFj
WGdiDur5vy3/WqDrHh/opFF4a5J7HSHviWGkieUF5fwd7pMsrqzv7rltMrM5rNjm
ZdS49r2XRCH+nU9D72FV6N/4VJ5tmAhLjK7T5Ujz2f+fodStePkSEM69QyvhpZAJ
3dAgGiyauFzK0jVdNul3kKivfY7xHMEnYvi3SXOhtfMNl8FNBf6yR/yp9omwaQID
Te9aaugLvl0b62gRlfznCCUZ9GWsyU2EjpZqztkFCfuTaokbGRiCEF+X7/Xl7cMq
DmvC8T8VvLVNcSP40yJ1peeVap6px6CcQpjNKKKjyDO5ITSEZegYfO1kh8p2YOSr
3Bxd59LMgVkfDLssjMElPoo+nWmfUXxxnWmSO8ehl0/Tgw6H48R5SjoIF0iEnqek
P+lMR9H9YOIBUy07
=cO6X
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-for-4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm
KVM/arm fixes for 4.17, take #2
- Fix proxying of GICv2 CPU interface accesses
- Fix crash when switching to BE
- Track source vcpu git GICv2 SGIs
- Fix an outdated bit of documentation
One comment still mentioned process_maintenance operations after
commit af0614991a ("KVM: arm/arm64: vgic: Get rid of unnecessary
process_maintenance operation")
Update the comment to point to vgic_fold_lr_state instead, which
is where maintenance interrupts are taken care of.
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
ARM:
- PSCI selection API, a leftover from 4.16 (for stable)
- Kick vcpu on active interrupt affinity change
- Plug a VMID allocation race on oversubscribed systems
- Silence debug messages
- Update Christoffer's email address (linaro -> arm)
x86:
- Expose userspace-relevant bits of a newly added feature
- Fix TLB flushing on VMX with VPID, but without EPT
-----BEGIN PGP SIGNATURE-----
iQEcBAABCAAGBQJa44lQAAoJEED/6hsPKofo1dIH/3n9AZSWvavgL2V3j6agT8Yy
hxF4nHCFEJd5aqDNwbG9QEzivKw88r3o3mdB2XAQESB2MlCYR1jkTONm7yvVJTs/
/P9gj+DEQbCj2AgT//u3BGsAsZDKFhB9JwfmV2Mp4zDIqWFa6oCOGeq/iPVAGDcN
vUpuYeIicuH9SRoxH7de3z+BEXW0O+gCABXQtvA93FKTMz35yFTgmbDVCnvaV0zL
3B+3/4/jdbTRICW8EX6Li43+gEBUMtnVNkdqxLPTuCtDG8iuPUGfgF02gH99/9gj
hliV3Q4VUZKkSABW5AqKPe4+9rbsHCh9eL0LpHFGI9y+6LeUIOXAX4CtohR8gWE=
=W9Vz
-----END PGP SIGNATURE-----
rMerge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Radim Krčmář:
"ARM:
- PSCI selection API, a leftover from 4.16 (for stable)
- Kick vcpu on active interrupt affinity change
- Plug a VMID allocation race on oversubscribed systems
- Silence debug messages
- Update Christoffer's email address (linaro -> arm)
x86:
- Expose userspace-relevant bits of a newly added feature
- Fix TLB flushing on VMX with VPID, but without EPT"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
x86/headers/UAPI: Move DISABLE_EXITS KVM capability bits to the UAPI
kvm: apic: Flush TLB after APIC mode/address change if VPIDs are in use
arm/arm64: KVM: Add PSCI version selection API
KVM: arm/arm64: vgic: Kick new VCPU on interrupt migration
arm64: KVM: Demote SVE and LORegion warnings to debug only
MAINTAINERS: Update e-mail address for Christoffer Dall
KVM: arm/arm64: Close VMID generation race
Now that we make sure we don't inject multiple instances of the
same GICv2 SGI at the same time, we've made another bug more
obvious:
If we exit with an active SGI, we completely lose track of which
vcpu it came from. On the next entry, we restore it with 0 as a
source, and if that wasn't the right one, too bad. While this
doesn't seem to trouble GIC-400, the architectural model gets
offended and doesn't deactivate the interrupt on EOI.
Another connected issue is that we will happilly make pending
an interrupt from another vcpu, overriding the above zero with
something that is just as inconsistent. Don't do that.
The final issue is that we signal a maintenance interrupt when
no pending interrupts are present in the LR. Assuming we've fixed
the two issues above, we end-up in a situation where we keep
exiting as soon as we've reached the active state, and not be
able to inject the following pending.
The fix comes in 3 parts:
- GICv2 SGIs have their source vcpu saved if they are active on
exit, and restored on entry
- Multi-SGIs cannot go via the Pending+Active state, as this would
corrupt the source field
- Multi-SGIs are converted to using MI on EOI instead of NPIE
Fixes: 16ca6a607d ("KVM: arm/arm64: vgic: Don't populate multiple LRs with the same vintid")
Reported-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
It's possible for userspace to control n. Sanitize n when using it as an
array index.
Note that while it appears that n must be bound to the interval [0,3]
due to the way it is extracted from addr, we cannot guarantee that
compiler transformations (and/or future refactoring) will ensure this is
the case, and given this is a slow path it's better to always perform
the masking.
Found by smatch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: kvmarm@lists.cs.columbia.edu
Signed-off-by: Will Deacon <will.deacon@arm.com>
It's possible for userspace to control intid. Sanitize intid when using
it as an array index.
At the same time, sort the includes when adding <linux/nospec.h>.
Found by smatch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: kvmarm@lists.cs.columbia.edu
Signed-off-by: Will Deacon <will.deacon@arm.com>
Call clear_siginfo to ensure every stack allocated siginfo is properly
initialized before being passed to the signal sending functions.
Note: It is not safe to depend on C initializers to initialize struct
siginfo on the stack because C is allowed to skip holes when
initializing a structure.
The initialization of struct siginfo in tracehook_report_syscall_exit
was moved from the helper user_single_step_siginfo into
tracehook_report_syscall_exit itself, to make it clear that the local
variable siginfo gets fully initialized.
In a few cases the scope of struct siginfo has been reduced to make it
clear that siginfo siginfo is not used on other paths in the function
in which it is declared.
Instances of using memset to initialize siginfo have been replaced
with calls clear_siginfo for clarity.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Peter Xu
Paolo Bonzini
Wanpeng Li
James Morse
Linus Torvalds
Jérôme Glisse
Cédric Le Goater
KarimAllah Ahmed
Jiang Biao
Christian Borntraeger
Christoffer Dall
Suzuki K Poulose
Andrew Jones
Andrew Murray
Mark Rutland
Dave Martin
Anshuman Khandual
Marc Zyngier
Wei Huang
Sebastian Andrzej Siewior
Sean Christopherson
Zenghui Yu
YueHaibing
Rafael J. Wysocki
Greg Kroah-Hartman
Leo Yan
Shaokun Zhang
Lan Tianyu
Nir Weiner
Ben Gardon
Gustavo A. R. Silva
Colin Ian King
Masahiro Yamada
Andre Przywara
Ingo Molnar
Jann Horn
Paul E. McKenney
Julien Thierry
Tomas Bortoli
Joel Fernandes (Google)
Wei Yang
Jim Mattson
Eric Biggers
Punit Agrawal
Lance Roy
Michal Hocko
Dongjiu Geng
Peng Hao
Vitaly Kuznetsov
Kristina Martsenko
Eric W. Biederman
Vladimir Murzin
Jia He
Junaid Shahid
Kees Cook
Lan Tianyu
Claudio Imbrenda
Ard Biesheuvel
Peter Zijlstra
Marc Orr
Souptick Joarder
Christoph Hellwig
Eric Auger
Christoffer Dall
Radim Krčmář
Valentin Schneider