I noticed when running an enospc test that we would get stuck committing the
transaction in check_data_space even though we truly didn't have enough space.
So check to see if bytes_pinned is bigger than num_bytes, if it's not don't
commit the transaction. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
When profiling the find cluster code it's hard to tell where we are spending our
time because the bitmap and non-bitmap functions get inlined by the compiler, so
make that not happen. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
If we are looking for a cluster in a particularly sparse or fragmented block
group, we will do a lot of looping through the free space tree looking for
various things, and if we need to look at bitmaps we will endup doing the whole
dance twice. So instead add the bitmap entries to a temporary list so if we
have to do the bitmap search we can just look through the list of entries we've
found quickly instead of having to loop through the entire tree again. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
If we request a lock and then abort (e.g., ^C), we need to send a matching
unlock request to the MDS to unwind our lock attempt to avoid indefinitely
blocking other clients.
Reported-by: Brian Chrisman <brchrisman@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
Getting ENOENT is equivalent to reading 0 bytes. Make that correction
before setting up the hit_stripe and was_short flags.
Fixes the following case:
dd if=/dev/zero of=/mnt/fs_depot/dd3 bs=1 seek=1048576 count=0
dd if=/mnt/fs_depot/dd3 of=/root/ddout1 skip=8 bs=500 count=2 iflag=direct
Reported-by: Henry C Chang <henry.cy.chang@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
If we get a short read from the OSD because the object is small, we need to
zero the remainder of the buffer. For O_DIRECT reads, the attempted range
is not trimmed to i_size by the VFS, so we were actually looping
indefinitely.
Fix by trimming by i_size, and the unconditionally zeroing the trailing
range.
Reported-by: Jeff Wu <cpwu@tnsoft.com.cn>
Signed-off-by: Sage Weil <sage@newdream.net>
We should use ihold whenever we already have a stable inode ref, even
when we aren't holding i_lock. This avoids adding new and unnecessary
locking dependencies.
Signed-off-by: Sage Weil <sage@newdream.net>
* 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
vfs: make unlink() and rmdir() return ENOENT in preference to EROFS
lmLogOpen() broken failure exit
usb: remove bad dput after dentry_unhash
more conservative S_NOSEC handling
If user space attempts to remove a non-existent file or directory, and
the file system is mounted read-only, return ENOENT instead of EROFS.
Either error code is arguably valid/correct, but ENOENT is a more
specific error message.
Reported-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Callers of lmLogOpen() expect it to return -E... on failure exits, which
is what it returns, except for the case of blkdev_get_by_dev() failure.
It that case lmLogOpen() return the error with the wrong sign...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Dave Kleikamp <dave.kleikamp@oracle.com>
When signing is enabled, the first session that's established on a
socket will cause a printk like this to pop:
CIFS VFS: Unexpected SMB signature
This is because the key exchange hasn't happened yet, so the signature
field is bogus. Don't try to check the signature on the socket until the
first session has been established. Also, eliminate the specific check
for SMB_COM_NEGOTIATE since this check covers that case too.
Cc: stable@kernel.org
Cc: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
fix for commit 4795bb37ef, nfsd: break
lease on unlink, link, and rename
if the LINK operation breaks a delegation, it returns NFS4ERR_NOENT
(which is not a valid error in rfc 5661) instead of NFS4ERR_DELAY.
the return value of nfsd_break_lease() in nfsd_link() must be
converted from host_err to err
Signed-off-by: Casey Bodley <cbodley@citi.umich.edu>
Cc: stable@kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
nfsd V4 support uses crypto interfaces, so select CRYPTO
to fix build errors in 2.6.39:
ERROR: "crypto_destroy_tfm" [fs/nfsd/nfsd.ko] undefined!
ERROR: "crypto_alloc_base" [fs/nfsd/nfsd.ko] undefined!
Reported-by: Wakko Warner <wakko@animx.eu.org>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: stable@kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Commit b0b0c0a26e "nfsd: add proc file listing kernel's gss_krb5
enctypes" added an nunnecessary dependency of nfsd on the auth_rpcgss
module.
It's a little ad hoc, but since the only piece of information nfsd needs
from rpcsec_gss_krb5 is a single static string, one solution is just to
share it with an include file.
Cc: stable@kernel.org
Reported-by: Michael Guntsche <mike@it-loops.com>
Cc: Kevin Coffman <kwc@citi.umich.edu>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Build fails if CONFIG_KEYS is not selected.
Signed-off-by: Darren Salt <linux@youmustbejoking.demon.co.uk>
Reviewed-by: Shirish Pargaonkar <shirishp@us.ibm.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
While creating fixed tracepoints for ext3, basically by porting them
from ext4, I found a lot of useless retyping, wrong type usage, useless
variable passing and other inconsistencies in the ext4 fixed tracepoint
code.
This patch cleans the fixed tracepoint code for ext4 and also simplify
some of them.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Currently we are not marking the extent as the last one
(FIEMAP_EXTENT_LAST) if there is a hole at the end of the file. This is
because we just do not check for it right now and continue searching for
next extent. But at the point we hit the hole at the end of the file, it
is too late.
This commit adds check for the allocated block in subsequent extent and
if there is no more extents (block = EXT_MAX_BLOCKS) just flag the
current one as the last one.
This behaviour has been spotted unintentionally by 252 xfstest, when the
test hangs out, because of wrong loop condition. However on other
filesystems (like xfs) it will exit anyway, because we notice the last
extent flag and exit.
With this patch xfstest 252 does not hang anymore, ext4 fiemap
implementation still reports bad extent type in some cases, however
this seems to be different issue.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Kazuya Mio reported that he was able to hit BUG_ON(next == lblock)
in ext4_ext_put_gap_in_cache() while creating a sparse file in extent
format and fill the tail of file up to its end. We will hit the BUG_ON
when we write the last block (2^32-1) into the sparse file.
The root cause of the problem lies in the fact that we specifically set
s_maxbytes so that block at s_maxbytes fit into on-disk extent format,
which is 32 bit long. However, we are not storing start and end block
number, but rather start block number and length in blocks. It means
that in order to cover extent from 0 to EXT_MAX_BLOCK we need
EXT_MAX_BLOCK+1 to fit into len (because we counting block 0 as well) -
and it does not.
The only way to fix it without changing the meaning of the struct
ext4_extent members is, as Kazuya Mio suggested, to lower s_maxbytes
by one fs block so we can cover the whole extent we can get by the
on-disk extent format.
Also in many places EXT_MAX_BLOCK is used as length instead of maximum
logical block number as the name suggests, it is all a bit messy. So
this commit renames it to EXT_MAX_BLOCKS and change its usage in some
places to actually be maximum number of blocks in the extent.
The bug which this commit fixes can be reproduced as follows:
dd if=/dev/zero of=/mnt/mp1/file bs=<blocksize> count=1 seek=$((2**32-2))
sync
dd if=/dev/zero of=/mnt/mp1/file bs=<blocksize> count=1 seek=$((2**32-1))
Reported-by: Kazuya Mio <k-mio@sx.jp.nec.com>
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
metadata is not parameter of ext4_free_blocks() any more.
Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: (25 commits)
btrfs: fix uninitialized variable warning
btrfs: add helper for fs_info->closing
Btrfs: add mount -o inode_cache
btrfs: scrub: add explicit plugging
btrfs: use btrfs_ino to access inode number
Btrfs: don't save the inode cache if we are deleting this root
btrfs: false BUG_ON when degraded
Btrfs: don't save the inode cache in non-FS roots
Btrfs: make sure we don't overflow the free space cache crc page
Btrfs: fix uninit variable in the delayed inode code
btrfs: scrub: don't reuse bios and pages
Btrfs: leave spinning on lookup and map the leaf
Btrfs: check for duplicate entries in the free space cache
Btrfs: don't try to allocate from a block group that doesn't have enough space
Btrfs: don't always do readahead
Btrfs: try not to sleep as much when doing slow caching
Btrfs: kill BTRFS_I(inode)->block_group
Btrfs: don't look at the extent buffer level 3 times in a row
Btrfs: map the node block when looking for readahead targets
Btrfs: set range_start to the right start in count_range_bits
...
With Linus' tree, today's linux-next build (powercp ppc64_defconfig)
produced this warning:
fs/btrfs/delayed-inode.c: In function 'btrfs_delayed_update_inode':
fs/btrfs/delayed-inode.c:1598:6: warning: 'ret' may be used
uninitialized in this function
Introduced by commit 16cdcec736 ("btrfs: implement delayed inode items
operation").
This fixes a bug in btrfs_update_inode(): if the returned value from
btrfs_delayed_update_inode is a nonzero garbage, inode stat data are not
updated and several call paths may hit a BUG_ON or fail with strange
code.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David Sterba <dsterba@suse.cz>
This makes the inode map cache default to off until we
fix the overflow problem when the free space crcs don't fit
inside a single page.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
With the removal of the implicit plugging scrub ends up doing more and
smaller I/O than necessary. This patch adds explicit plugging per chunk.
Signed-off-by: Arne Jansen <sensille@gmx.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
commit 4cb5300bc ("Btrfs: add mount -o auto_defrag") accesses inode
number directly while it should use the helper with the new inode
number allocator.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
With xfstest 254 I can panic the box every time with the inode number caching
stuff on. This is because we clean the inodes out when we delete the subvolume,
but then we write out the inode cache which adds an inode to the subvolume inode
tree, and then when it gets evicted again the root gets added back on the dead
roots list and is deleted again, so we have a double free. To stop this from
happening just return 0 if refs is 0 (and we're not the tree root since tree
root always has refs of 0). With this fix 254 no longer panics. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Tested-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
In degraded mode the struct btrfs_device of missing devs don't have
device->name set. A kstrdup of NULL correctly returns NULL. Don't
BUG in this case.
Signed-off-by: Arne Jansen <sensille@gmx.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
This adds extra checks to make sure the inode map we are caching really
belongs to a FS root instead of a special relocation tree. It
prevents crashes during balancing operations.
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
The free space cache uses only one page for crcs right now,
which means we can't have a cache file bigger than the
crcs we can fit in the first page. This adds a check to
enforce that restriction.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
The current scrub implementation reuses bios and pages as often as possible,
allocating them only on start and releasing them when finished. This leads
to more problems with the block layer than it's worth. The elevator gets
confused when there are more pages added to the bio than bi_size suggests.
This patch completely rips out the reuse of bios and pages and allocates
them freshly for each submit.
Signed-off-by: Arne Jansen <sensille@gmx.net>
Signed-off-by: Chris Maosn <chris.mason@oracle.com>
* 'for-linus' of git://git.kernel.dk/linux-block:
block: Use hlist_entry() for io_context.cic_list.first
cfq-iosched: Remove bogus check in queue_fail path
xen/blkback: potential null dereference in error handling
xen/blkback: don't call vbd_size() if bd_disk is NULL
block: blkdev_get() should access ->bd_disk only after success
CFQ: Fix typo and remove unnecessary semicolon
block: remove unwanted semicolons
Revert "block: Remove extra discard_alignment from hd_struct."
nbd: adjust 'max_part' according to part_shift
nbd: limit module parameters to a sane value
nbd: pass MSG_* flags to kernel_recvmsg()
block: improve the bio_add_page() and bio_add_pc_page() descriptions
Caching "we have already removed suid/caps" was overenthusiastic as merged.
On network filesystems we might have had suid/caps set on another client,
silently picked by this client on revalidate, all of that *without* clearing
the S_NOSEC flag.
AFAICS, the only reasonably sane way to deal with that is
* new superblock flag; unless set, S_NOSEC is not going to be set.
* local block filesystems set it in their ->mount() (more accurately,
mount_bdev() does, so does btrfs ->mount(), users of mount_bdev() other than
local block ones clear it)
* if any network filesystem (or a cluster one) wants to use S_NOSEC,
it'll need to set MS_NOSEC in sb->s_flags *AND* take care to clear S_NOSEC when
inode attribute changes are picked from other clients.
It's not an earth-shattering hole (anybody that can set suid on another client
will almost certainly be able to write to the file before doing that anyway),
but it's a bug that needs fixing.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
When CONFIG_CRYPTO_ECB is not set, trying to mount a CIFS share with NTLM
security resulted in mount failure with the following error:
"CIFS VFS: could not allocate des crypto API"
Seems like a leftover from commit 43988d7.
Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
CC: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
When ntlm security mechanim is used, the message that warns about the upgrade
to ntlmv2 got the kernel release version wrong (Blame it on Linus :). Fix it.
Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
The free space fixup is currently initiated during mount after the call to
ubifs_write_master() which results in a write to PEBs; this has been observed
with the patch 'assert no fixup when writing a node' applied:
Move the free space fixup on mount to before the calls to
ubifs_recover_inl_heads() and ubifs_write_master(). This results in no
assertions with the previously mentioned patch applied.
Artem: tweaked the patch a bit
Signed-off-by: Ben Gardiner <bengardiner@nanometrics>
Reviewed-by: Matthew L. Creech <mlcreech@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
The current 'mount_ubifs()' implementation does not initialize the LPT until the
the master node is marked dirty. Move the LPT initialization to before marking
the master node dirty. This is a preparation for the next patch which will move
the free-space-fixup check to before marking the master node dirty, because we
have to fix-up the free space before doing any writes.
Artem: massaged the patch and commit message.
Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca>
Reviewed-by: Matthew L. Creech <mlcreech@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
The current free space fixup can result in some writing to the UBI volume
when the space_fixup flag is set.
To catch instances where UBIFS is writing to the NAND while the space_fixup
flag is set, add an assert to ubifs_write_node().
Artem: tweaked the patch, added similar assertion to the write buffer
write path.
Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca>
Reviewed-by: Matthew L. Creech <mlcreech@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
UBIFS maintains per-filesystem and global clean znode counters
('c->clean_zn_cnt' and 'ubifs_clean_zn_cnt'). It is important to maintain
correct values there since the shrinker relies on 'ubifs_clean_zn_cnt'.
However, in case of failures during commit the counters were corrupted. E.g.,
if a failure happens in the middle of 'write_index()', then some nodes in the
commit list ('c->cnext') are marked as clean, and some are marked as dirty. And
the 'ubifs_destroy_tnc_subtree()' frees does not retrun correct count, and we
end up with non-zero 'c->clean_zn_cnt' when unmounting. This means that if we
have 2 file-sytem and one of them fails, and we unmount it,
'ubifs_clean_zn_cnt' stays incorrect and confuses the shrinker.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
UBIFS leaks memory on error path in 'ubifs_jnl_update()' in case of write
failure because it forgets to free the 'struct ubifs_dent_node *dent' object.
Although the object is small, the alignment can make it large - e.g., 2KiB
if the min. I/O unit is 2KiB.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Cc: stable@kernel.org
Sometimes VM asks the shrinker to return amount of objects it can shrink,
and we return the ubifs_clean_zn_cnt in that case. However, it is possible
that this counter is negative for a short period of time, due to the way
UBIFS TNC code updates it. And I can observe the following warnings sometimes:
shrink_slab: ubifs_shrinker+0x0/0x2b7 [ubifs] negative objects to delete nr=-8541616642706119788
This patch makes sure UBIFS never returns negative count of objects.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Cc: stable@kernel.org
Unfortunately, the recovery fix d1606a59b6be4ea392eabd40d1250aa1eeb19efb
(UBIFS: fix extremely rare mount failure) broke recovery. This commit make
UBIFS drop the last min. I/O unit in all journal heads, but this is needed only
for the GC head. And this does not work for non-GC heads. For example, if
suppose we have min. I/O units A and B, and A contains a valid node X, which
was fsynced, and then a group of nodes Y which spans the rest of A and B. In
this case we'll drop not only Y, but also X, which is obviously incorrect.
This patch fixes the issue and additionally makes recovery to drop last min.
I/O unit only for the GC head, and leave things as they have been for ages for
the other heads - this is safer.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Instead of passing "grouped" parameter to 'ubifs_recover_leb()' which tells
whether the nodes are grouped in the LEB to recover, pass the journal head
number and let 'ubifs_recover_leb()' look at the journal head's 'grouped' flag.
This patch is a preparation to a further fix where we'll need to know the
journal head number for other purposes.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Journal heads are different in a way how UBIFS writes nodes there. All normal
journal heads receive grouped nodes, while the GC journal heads receives
ungrouped nodes. This patch adds a 'grouped' flag to 'struct ubifs_jhead' which
describes this property.
This patch is a preparation to a further recovery fix.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Commit ab51afe05273741f72383529ef488aa1ea598ec6 was a good clean-up, but
it introduced a regression - now UBIFS prints scary error messages during
recovery on all corrupted nodes, even though the corruptions are expected
(due to a power cut). This patch fixes the issue.
Additionally fix a typo in a commentary introduced by the same commit.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
d4dc210f69 (block: don't block events on excl write for non-optical
devices) added dereferencing of bdev->bd_disk to test
GENHD_FL_BLOCK_EVENTS_ON_EXCL_WRITE; however, bdev->bd_disk can be
%NULL if open failed which can lead to an oops.
Test the flag after testing open was successful, not before.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: David Miller <davem@davemloft.net>
Tested-by: David Miller <davem@davemloft.net>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
The lockdep warning below detects a possible A->B/B->A locking
dependency of mm->mmap_sem and dcookie_mutex. The order in
sync_buffer() is mm->mmap_sem/dcookie_mutex, while in
sys_lookup_dcookie() it is vice versa.
Fixing it in sys_lookup_dcookie() by unlocking dcookie_mutex before
copy_to_user().
oprofiled/4432 is trying to acquire lock:
(&mm->mmap_sem){++++++}, at: [<ffffffff810b444b>] might_fault+0x53/0xa3
but task is already holding lock:
(dcookie_mutex){+.+.+.}, at: [<ffffffff81124d28>] sys_lookup_dcookie+0x45/0x149
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (dcookie_mutex){+.+.+.}:
[<ffffffff8106557f>] lock_acquire+0xf8/0x11e
[<ffffffff814634f0>] mutex_lock_nested+0x63/0x309
[<ffffffff81124e5c>] get_dcookie+0x30/0x144
[<ffffffffa0000fba>] sync_buffer+0x196/0x3ec [oprofile]
[<ffffffffa0001226>] task_exit_notify+0x16/0x1a [oprofile]
[<ffffffff81467b96>] notifier_call_chain+0x37/0x63
[<ffffffff8105803d>] __blocking_notifier_call_chain+0x50/0x67
[<ffffffff81058068>] blocking_notifier_call_chain+0x14/0x16
[<ffffffff8105a718>] profile_task_exit+0x1a/0x1c
[<ffffffff81039e8f>] do_exit+0x2a/0x6fc
[<ffffffff8103a5e4>] do_group_exit+0x83/0xae
[<ffffffff8103a626>] sys_exit_group+0x17/0x1b
[<ffffffff8146ad4b>] system_call_fastpath+0x16/0x1b
-> #0 (&mm->mmap_sem){++++++}:
[<ffffffff81064dfb>] __lock_acquire+0x1085/0x1711
[<ffffffff8106557f>] lock_acquire+0xf8/0x11e
[<ffffffff810b4478>] might_fault+0x80/0xa3
[<ffffffff81124de7>] sys_lookup_dcookie+0x104/0x149
[<ffffffff8146ad4b>] system_call_fastpath+0x16/0x1b
other info that might help us debug this:
1 lock held by oprofiled/4432:
#0: (dcookie_mutex){+.+.+.}, at: [<ffffffff81124d28>] sys_lookup_dcookie+0x45/0x149
stack backtrace:
Pid: 4432, comm: oprofiled Not tainted 2.6.39-00008-ge5a450d #9
Call Trace:
[<ffffffff81063193>] print_circular_bug+0xae/0xbc
[<ffffffff81064dfb>] __lock_acquire+0x1085/0x1711
[<ffffffff8102ef13>] ? get_parent_ip+0x11/0x42
[<ffffffff810b444b>] ? might_fault+0x53/0xa3
[<ffffffff8106557f>] lock_acquire+0xf8/0x11e
[<ffffffff810b444b>] ? might_fault+0x53/0xa3
[<ffffffff810d7d54>] ? path_put+0x22/0x27
[<ffffffff810b4478>] might_fault+0x80/0xa3
[<ffffffff810b444b>] ? might_fault+0x53/0xa3
[<ffffffff81124de7>] sys_lookup_dcookie+0x104/0x149
[<ffffffff8146ad4b>] system_call_fastpath+0x16/0x1b
References: https://bugzilla.kernel.org/show_bug.cgi?id=13809
Cc: <stable@kernel.org> # .27+
Signed-off-by: Robert Richter <robert.richter@amd.com>
The dentry_unhash push-down series missed that shink_dcache_parent needs to
be called prior to rmdir or dir rename to clear DCACHE_REFERENCED and
allow efficient dentry reclaim.
Reported-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
It was not a good idea to start dereferencing disk->queue from
the fs sysfs strategy for displaying discard alignment. We ran
into first a NULL pointer deref, and after fixing that we sometimes
see unvalid disk->queue pointer values.
Since discard is the only one of the bunch actually looking into
the queue, just revert the change.
This reverts commit 23ceb5b771.
Conflicts:
fs/partitions/check.c
Now that ecryptfs_lookup_interpose() is no longer using
ecryptfs_header_cache_2 to read in metadata, the kmem_cache can be
removed and the ecryptfs_header_cache_1 kmem_cache can be renamed to
ecryptfs_header_cache.
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
ecryptfs_lookup_interpose() has turned into spaghetti code over the
years. This is an effort to clean it up.
- Shorten overly descriptive variable names such as ecryptfs_dentry
- Simplify gotos and error paths
- Create helper function for reading plaintext i_size from metadata
It also includes an optimization when reading i_size from the metadata.
A complete page-sized kmem_cache_alloc() was being done to read in 16
bytes of metadata. The buffer for that is now statically declared.
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Instead of having the calling functions translate the true/false return
code to either 0 or -EINVAL, have contains_ecryptfs_marker() return 0 or
-EINVAL so that the calling functions can just reuse the return code.
Also, rename the function to ecryptfs_validate_marker() to avoid callers
mistakenly thinking that it returns true/false codes.
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Only unlock and d_add() new inodes after the plaintext inode size has
been read from the lower filesystem. This fixes a race condition that
was sometimes seen during a multi-job kernel build in an eCryptfs mount.
https://bugzilla.kernel.org/show_bug.cgi?id=36002
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Reported-by: David <david@unsolicited.net>
Tested-by: David <david@unsolicited.net>
* 'for-2.6.40' of git://linux-nfs.org/~bfields/linux: (22 commits)
nfsd: make local functions static
NFSD: Remove unused variable from nfsd4_decode_bind_conn_to_session()
NFSD: Check status from nfsd4_map_bcts_dir()
NFSD: Remove setting unused variable in nfsd_vfs_read()
nfsd41: error out on repeated RECLAIM_COMPLETE
nfsd41: compare request's opcnt with session's maxops at nfsd4_sequence
nfsd v4.1 lOCKT clientid field must be ignored
nfsd41: add flag checking for create_session
nfsd41: make sure nfs server process OPEN with EXCLUSIVE4_1 correctly
nfsd4: fix wrongsec handling for PUTFH + op cases
nfsd4: make fh_verify responsibility of nfsd_lookup_dentry caller
nfsd4: introduce OPDESC helper
nfsd4: allow fh_verify caller to skip pseudoflavor checks
nfsd: distinguish functions of NFSD_MAY_* flags
svcrpc: complete svsk processing on cb receive failure
svcrpc: take advantage of tcp autotuning
SUNRPC: Don't wait for full record to receive tcp data
svcrpc: copy cb reply instead of pages
svcrpc: close connection if client sends short packet
svcrpc: note network-order types in svc_process_calldir
...
* 'nfs-for-2.6.40' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
SUNRPC: Support for RPC over AF_LOCAL transports
SUNRPC: Remove obsolete comment
SUNRPC: Use AF_LOCAL for rpcbind upcalls
SUNRPC: Clean up use of curly braces in switch cases
NFS: Revert NFSROOT default mount options
SUNRPC: Rename xs_encode_tcp_fragment_header()
nfs,rcu: convert call_rcu(nfs_free_delegation_callback) to kfree_rcu()
nfs41: Correct offset for LAYOUTCOMMIT
NFS: nfs_update_inode: print current and new inode size in debug output
NFSv4.1: Fix the handling of NFS4ERR_SEQ_MISORDERED errors
NFSv4: Handle expired stateids when the lease is still valid
SUNRPC: Deal with the lack of a SYN_SENT sk->sk_state_change callback...
Commit 1495f230fa ("vmscan: change shrinker API by passing
shrink_control struct") changed the API of ->shrink(), but missed ubifs
and cifs instances.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Implement pg_test vector to test for max IO sizes. We calculate
a max_io_size member only once, and cache it in lseg so to not
do so on every page insert.
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
[simplify logic]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
By default, unless pnfs is used coalesce pages until pg_bsize
(rsize or wsize) is reached.
pnfs layout drivers define their own pg_test methods that use
pnfs_generic_pg_test and need to define their own I/O size
limits (e.g. based on the file stripe size).
[Move a check from nfs_pageio_do_add_request to nfs_generic_pg_test]
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Use common code for pnfs_pageio_init_{read,write} and use
a common generic pg_test function.
Note that this function always assumes the the layout driver's
pg_test method is implemented.
[Fix BUG]
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
* Define API for io-engines to report delta_space_used in IOs
* Encode the osd-layout specific information of the layoutcommit
XDR buffer.
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Add a layout driver method to encode the layout type specific
opaque part of layout commit in-line in the xdr stream.
Currently, the pnfs-objects layout driver uses it to encode metadata hints
to the MDS and the blocks layout driver to commit provisionally allocated
extents to the file.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
An io_state pre-allocates an error information structure for each
possible osd-device that might error during IO. When IO is done if all
was well the io_state is freed. (as today). If the I/O has ended with an
error, the io_state is queued on a per-layout err_list. When eventually
encode_layoutreturn() is called, each error is properly encoded on the
XDR buffer and only then the io_state is removed from err_list and
de-allocated.
It is up to the io_engine to fill in the segment that fault and the type
of osd_error that occurred. By calling objlayout_io_set_result() for
each failing device.
In objio_osd:
* Allocate io-error descriptors space as part of io_state
* Use generic objlayout error reporting at end of io.
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Add a layout driver method to encode the layout type specific
opaque part of layout return in-line in the xdr stream.
Currently the pnfs-objects layout driver uses it to encode i/o error
information on LAYOUTRETURN.
Signed-off-by: Andy Adamson <andros@netapp.com>
[fixup layout header pointer for encode_layoutreturn]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
With the objects layout security model, we have object capabilities
that are associated with the layout and we anticipate that the server
will issue a cb_layoutrecall for any setattr that changes security
related attributes (user/group/mode/acl) or truncates the file.
Therefore, the layout is returned before issuing the setattr to avoid
the anticipated cb_layoutrecall.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
NFSv4.1 LAYOUTRETURN implementation
Currently, does not support layout-type payload encoding.
Signed-off-by: Alexandros Batsakis <batsakis@netapp.com>
Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com>
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Marc Eshel <eshel@almaden.ibm.com>
Signed-off-by: Zhang Jingwang <zhangjingwang@nrchpc.ac.cn>
[call pnfs_return_layout right before pnfs_destroy_layout]
[remove assert_spin_locked from pnfs_clear_lseg_list]
[remove wait parameter from the layoutreturn path.]
[remove return_type field from nfs4_layoutreturn_args]
[remove range from nfs4_layoutreturn_args]
[no need to send layoutcommit from _pnfs_return_layout]
[don't wait on sync layoutreturn]
[fix layout stateid in layoutreturn args]
[fixed NULL deref in _pnfs_return_layout]
[removed recaim member of nfs4_layoutreturn_args]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
With the use of the in-kernel osd library. Implement read/write
of data from/to osd-objects according to information specified
in the objects-layout.
Support for stripping over mirrors with a received stripe_unit.
There are however a few constrains which are not supported:
1. Stripe Unit must be a multiple of PAGE_SIZE
2. stripe length (stripe_unit * number_of_stripes) can not be
bigger then 32bit.
Also support raid-groups and partial-layout. Partial-layout is
when not all the groups are received on the line, addressing
only a partial range of the file.
TODO:
Only raid0! raid 4/5/6 support will come at later stage
A none supported layout will send IO through the MDS
[Important fallout from the last rebase]
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
[gfp_flags]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Non-rpc layout driver such as for objects and blocks
implement their own I/O path and error handling logic.
Therefore bypass NFS-based error handling for these layout drivers.
[fix lseg ref-count bugs, and null de-refs]
[Fall out from: non-rpc layout drivers]
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
[get rid of PNFS_USE_RPC_CODE]
[get rid of __nfs4_write_done_cb]
[revert useless change in nfs4_write_done_cb]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
When a new layout is received in objio_alloc_lseg all device_ids
referenced are retrieved. The device information is queried for from MDS
and then the osd_device is looked-up from the osd-initiator library. The
devices are cached in a per-mount-point list, for later use. At unmount
all devices are "put" back to the library.
objlayout_get_deviceinfo(), objlayout_put_deviceinfo() middleware
API for retrieving device information given a device_id.
TODO: The device cache can get big. Cap its size. Keep an LRU and start
to return devices which were not used, when list gets to big, or
when new entries allocation fail.
[pnfs-obj: Bugs in new global-device-cache code]
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
[gfp_flags]
[use global device cache]
[use layout driver in global device cache]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
objlayout_alloc_lseg prepares an xdr_stream and calls the
raid engins objio_alloc_lseg() to allocate a private
pnfs_layout_segment.
objio_osd.c::objio_alloc_lseg() uses passed xdr_stream to
decode and store the layout_segment information in an
objio_segment struct, using the pnfs_osd_xdr.h API for
the actual parsing the layout xdr.
objlayout_free_lseg calls objio_free_lseg() to free the
allocated space.
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
[gfp_flags]
[removed "extern" from function definitions]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
* Add the fs/nfs/objlayout/pnfs_osd_xdr_cli.c file, which will
include the XDR encode/decode implementations for the pNFS
client objlayout driver.
[Wrong type in comments]
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
* Define the PNFS_OBJLAYOUT Kconfig option in the nfs
master Kconfig file.
* Add the objlayout driver to the Kernel's Kbuild system.
* Add the fs/nfs/objlayout/Kbuild file for building the
objlayoutdriver.ko driver
* Define fs/nfs/objlayout/objio_osd.c, register the driver on module
initialization and unregister on exit.
[pnfs-obj: remove of CONFIG_PNFS fallout]
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
[added "unsure" clause]
[depend on NFS_V4_1]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
A pNFS client auto-negotiates a lot of features (minorversion level,
pNFS layout type, etc.). This is convenient, but makes certain kinds of
failures hard for a user to detect.
For example, if the client falls back on 4.0, or falls back to MDS IO
because the user didn't connect to the right iscsi disks before
mounting, the only symptoms may be reduced performance, which may not be
noticed till long after the actual failure, and may be difficult for a
user to diagnose.
However, such "failures" may also be perfectly normal in some cases, so
we don't want to spam the system logs with them.
One approach would be to put some more information into
/proc/self/mountstats.
Signed-off-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[pnfs: add commit client stats]
[fixup data types for "ret" variables in pnfs_try_to* inline funcs.]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[fix definition of show_pnfs for !CONFIG_PNFS]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: Fix show_sessions in the not CONFIG_NFS_V4_1 case]
There is a build error when CONFIG_NFS_V4 is set but
CONFIG_NFS_V4_1 is *not* set. show_sessions() prototype
was unbalanced between the two cases.
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
[pnfs: super.c remove CONFIG_PNFS]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Add offset and count parameters to pnfs_update_layout and use them to get
the layout in the pageio path.
Order cache layout segments in the following order:
* offset (ascending)
* length (descending)
* iomode (RW before READ)
Test byte range against the layout segment in use in pnfs_{read,write}_pg_test
so not to coalesce pages not using the same layout segment.
[fix lseg ordering]
[clean up pnfs_find_lseg lseg arg]
[remove unnecessary FIXME]
[fix ordering in pnfs_insert_layout]
[clean up pnfs_insert_layout]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
pnfs deviceids are unique per server, per layout type.
struct nfs_client is currently used to distinguish deviceids from
different nfs servers, yet these may clash between different layout
types on the same server. Therefore, use the layout driver associated
with each deviceid at insertion time to look it up, unhash, or
delete it.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Note: This functionlaity is incomplete as all layout segments referring to
the 'to be removed device id' need to be reaped, and all in flight I/O drained.
[use be32 res in nfs4_callback_devicenotify]
[use nfs_client to qualify deviceid for cb_notify_deviceid]
[use global deviceid cache for CB_NOTIFY_DEVICEID]
[refactor device cache _lookup_deviceid]
[refactor device cache _find_get_deviceid]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[Bug in new global-device-cache code]
[layout_driver MUST set free_deviceid_node if using dev-cache]
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
The eCryptfs inode get, initialization, and dentry interposition code
has two separate paths. One is for when dentry interposition is needed
after doing things like a mkdir in the lower filesystem and the other
is needed after a lookup. Unlocking new inodes and doing a d_add() needs
to happen at different times, depending on which type of dentry
interposing is being done.
This patch cleans up the inode get and initialization code paths and
splits them up so that the locking and d_add() differences mentioned
above can be handled appropriately in a later patch.
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Tested-by: David <david@unsolicited.net>
Use the pnfs_layoutdriver_type both as a qualifier for the deviceid,
distinguishing deviceid from different layout types on the server,
and for freeing the layout-driver allocated structure containing the
nfs4_deviceid_node.
[BUG in _deviceid_purge_client]
[layout_driver MUST set free_deviceid_node if using dev-cache]
[let ver < 4.1 compile]
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
[removed EXPORT_SYMBOL_GPL(nfs4_deviceid_purge_client)]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
These functions should live in inode.c since their focus is on inodes
and they're primarily used by functions in inode.c.
Also does a simple cleanup of ecryptfs_inode_test() and rolls
ecryptfs_init_inode() into ecryptfs_inode_set().
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Tested-by: David <david@unsolicited.net>
Move deviceid cache from the pnfs files layout driver to the
generic layer in preparation for the objects layout driver.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
deviceids are unique per server, per layout type.
Therefore, in the global cache in the files layout driver
deviceids from different servers may clash so we need
to qualify them with a struct nfs_client that represents
the nfs server that returned the deviceid.
Introduced in 2.6.39 commit ea8eecdd
"NFSv4.1 move deviceid cache to filelayout driver"
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (36 commits)
Cache xattr security drop check for write v2
fs: block_page_mkwrite should wait for writeback to finish
mm: Wait for writeback when grabbing pages to begin a write
configfs: remove unnecessary dentry_unhash on rmdir, dir rename
fat: remove unnecessary dentry_unhash on rmdir, dir rename
hpfs: remove unnecessary dentry_unhash on rmdir, dir rename
minix: remove unnecessary dentry_unhash on rmdir, dir rename
fuse: remove unnecessary dentry_unhash on rmdir, dir rename
coda: remove unnecessary dentry_unhash on rmdir, dir rename
afs: remove unnecessary dentry_unhash on rmdir, dir rename
affs: remove unnecessary dentry_unhash on rmdir, dir rename
9p: remove unnecessary dentry_unhash on rmdir, dir rename
ncpfs: fix rename over directory with dangling references
ncpfs: document dentry_unhash usage
ecryptfs: remove unnecessary dentry_unhash on rmdir, dir rename
hostfs: remove unnecessary dentry_unhash on rmdir, dir rename
hfsplus: remove unnecessary dentry_unhash on rmdir, dir rename
hfs: remove unnecessary dentry_unhash on rmdir, dir rename
omfs: remove unnecessary dentry_unhash on rmdir, dir rneame
udf: remove unnecessary dentry_unhash from rmdir, dir rename
...
Some recent benchmarking on btrfs showed that a major scaling bottleneck
on large systems on btrfs is currently the xattr lookup on every write.
Why xattr lookup on every write I hear you ask?
write wants to drop suid and security related xattrs that could set o
capabilities for executables. To do that it currently looks up
security.capability on EVERY write (even for non executables) to decide
whether to drop it or not.
In btrfs this causes an additional tree walk, hitting some per file system
locks and quite bad scalability. In a simple read workload on a 8S
system I saw over 90% CPU time in spinlocks related to that.
Chris Mason tells me this is also a problem in ext4, where it hits
the global mbcache lock.
This patch adds a simple per inode to avoid this problem. We only
do the lookup once per file and then if there is no xattr cache
the decision. All xattr changes clear the flag.
I also used the same flag to avoid the suid check, although
that one is pretty cheap.
A file system can also set this flag when it creates the inode,
if it has a cheap way to do so. This is done for some common file systems
in followon patches.
With this patch a major part of the lock contention disappears
for btrfs. Some testing on smaller systems didn't show significant
performance changes, but at least it helps the larger systems
and is generally more efficient.
v2: Rename is_sgid. add file system helper.
Cc: chris.mason@oracle.com
Cc: josef@redhat.com
Cc: viro@zeniv.linux.org.uk
Cc: agruen@linbit.com
Cc: Serge E. Hallyn <serue@us.ibm.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The descriptions of bio_add_page() and bio_add_pc_page() are slightly
inconsistent; improve them.
Signed-off-by: Andreas Gruenbacher <agruen@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
For filesystems such as nilfs2 and xfs that use block_page_mkwrite, modify that
function to wait for pending writeback before allowing the page to become
writable. This is needed to stabilize pages during writeback for those two
filesystems.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
configfs does not have problems with references to unlinked directories.
CC: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
fat does not have problems with references to unlinked directories.
CC: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Hpfs has no problems with references to unlinked directories.
We leave one dentry_unhash call in place, in hpfs_unlink's strange path
where it tries to truncate a file because the disk is full. I'm not sure
what the full story is there.
CC: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Minix has no issues with references to unlinked directories.
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Fuse has no problems with references to unlinked directories.
CC: Miklos Szeredi <miklos@szeredi.hu>
CC: fuse-devel@lists.sourceforge.net
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Coda has no problems with references to unlinked directories.
CC: Jan Harkes <jaharkes@cs.cmu.edu>
CC: coda@cs.cmu.edu
CC: codalist@coda.cs.cmu.edu
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
afs has no problems with references to unlinked directories.
CC: David Howells <dhowells@redhat.com>
CC: linux-afs@lists.infradead.org
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
affs has no problems with references to unlinked directories.
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
9p has no problems with references to unlinked directories.
CC: Eric Van Hensbergen <ericvh@gmail.com>
CC: Ron Minnich <rminnich@sandia.gov>
CC: Latchesar Ionkov <lucho@ionkov.net>
CC: v9fs-developer@lists.sourceforge.net
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
ncpfs does not handle references to unlinked directories (or so it would
seem given the ncp_rmdir check). Since it is also possible to rename over
an empty directory, perform the same check here.
CC: Petr Vandrovec <petr@vandrovec.name>
CC: linux-kernel@vger.kernel.org
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
ncpfs returns EBUSY if there are any references to the directory. The
dentry_unhash call only unhashes the dentry if there are no references.
CC: Petr Vandrovec <petr@vandrovec.name>
CC: linux-kernel@vger.kernel.org
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
ecryptfs does not have problems with references to unlinked directories.
CC: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
CC: Dustin Kirkland <kirkland@canonical.com>
CC: ecryptfs-devel@lists.launchpad.net
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
hostfs does not have problems with references to unlinked directories.
CC: Jeff Dike <jdike@addtoit.com>
CC: Richard Weinberger <richard@nod.at>
CC: user-mode-linux-devel@lists.sourceforge.net
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
hfsplus does not have problems with references to unlinked directories.
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
hfs does not have problems with references to unlinked directories.
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
omfs does not have problems with references to unlinked directories.
CC: Bob Copeland <me@bobcopeland.com>
CC: linux-karma-devel@lists.sourceforge.net
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
udf does not have problems with references to unlinked directories.
CC: Jan Kara <jack@suse.cz>
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Reiserfs does not have problems with references to unlinked directories.
CC: reiserfs-devel@vger.kernel.org
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
ufs does not have problems with references to unlinked directories.
CC: Evgeniy Dushistov <dushistov@mail.ru>
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
ubifs does not have problems with references to unlinked directories.
CC: Artem Bityutskiy <dedekind1@gmail.com>
CC: Adrian Hunter <adrian.hunter@nokia.com>
CC: linux-mtd@lists.infradead.org
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
nilfs2 does not have problems with references to unlinked directories.
CC: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp>
CC: linux-nilfs@vger.kernel.org
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
logfs does not have problems with references to unlinked directories.
CC: Joern Engel <joern@logfs.org>
CC: logfs@logfs.org
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
jfs does not have problems with references to unlinked directories.
CC: Dave Kleikamp <shaggy@kernel.org>
CC: jfs-discussion@lists.sourceforge.net
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
jffs2 does not have problems with references to unlinked directories.
CC: David Woodhouse <dwmw2@infradead.org>
CC: linux-mtd@lists.infradead.org
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
sysv does not have problems with references to unlinked directories.
CC: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Bfs does not have problems with references to unlinked directories.
CC: tigran@aivazian.fsnet.co.uk
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* git://git.infradead.org/mtd-2.6: (97 commits)
mtd: kill CONFIG_MTD_PARTITIONS
mtd: remove add_mtd_partitions, add_mtd_device and friends
mtd: convert remaining users to mtd_device_register()
mtd: samsung onenand: convert to mtd_device_register()
mtd: omap2 onenand: convert to mtd_device_register()
mtd: txx9ndfmc: convert to mtd_device_register()
mtd: tmio_nand: convert to mtd_device_register()
mtd: socrates_nand: convert to mtd_device_register()
mtd: sharpsl: convert to mtd_device_register()
mtd: s3c2410 nand: convert to mtd_device_register()
mtd: ppchameleonevb: convert to mtd_device_register()
mtd: orion_nand: convert to mtd_device_register()
mtd: omap2: convert to mtd_device_register()
mtd: nomadik_nand: convert to mtd_device_register()
mtd: ndfc: convert to mtd_device_register()
mtd: mxc_nand: convert to mtd_device_register()
mtd: mpc5121_nfc: convert to mtd_device_register()
mtd: jz4740_nand: convert to mtd_device_register()
mtd: h1910: convert to mtd_device_register()
mtd: fsmc_nand: convert to mtd_device_register()
...
Fixed up trivial conflicts in
- drivers/mtd/maps/integrator-flash.c: removed in ARM tree
- drivers/mtd/maps/physmap.c: addition of afs partition probe type
clashing with removal of CONFIG_MTD_PARTITIONS
Marek Belisko <marek.belisko@gmail.com> reports that recent attempts
to fix regressions in NFSROOT have broken his configuration:
> After update from 2.6.38-rc8 to 2.6.38 is mounting rootfs over nfs not possible.
> Log:
> VFS: Mounted root (nfs filesystem) on device 0:14.
> Freeing init memory: 132K
> nfs: server 10.146.1.21 not responding, still trying
> nfs: server 10.146.1.21 not responding, still trying
>
> This is never ending. I make short bisect (not too much commits
> between versions)
> and bad commit was reported: 53d4737580
>
> NFS: NFSROOT should default to "proto=udp"
>
> I've tested on mini2440 board (DM9000, static IP).
> Is there some missing option or something else to be checked?
An examination of a network trace captured during the failure shows
that the mount is actually succeeding, but that the client is not
seeing READ replies larger than 16KB. This could be a local packet
filtering issue on the client, but we didn't troubleshoot this
further because of the reported "git bisect" result.
Last fall we removed the ad hoc mount option parser in
fs/nfs/nfsroot.c in favor of using the main parser in fs/nfs/super.c
(see commit 56463e50 "NFS: Use super.c for NFSROOT mount option
parsing"). That commit changed the default NFSROOT mount options to
be the same as those employed by user space mounts.
As it turns out, these new default mount options are not tolerated by
many embedded systems. So far these problems have been due to
specific behavior of certain embedded NICs. The NFS community does
not have such hardware on hand for running tests.
Commit 53d47375 recently introduced a clean way to specify default
mount options for NFSROOT, so we can now easily restore the
traditional defaults for NFSROOT:
vers=2,udp,rsize=4096,wsize=4096
This should revert the new default NFSROOT mount options introduced
with commit 56463e50.
Tested-by: Marek Belisto <marek.belisto@open-nandra.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The rcu callback nfs_free_delegation_callback() just calls a kfree(),
so we use kfree_rcu() instead of the call_rcu(nfs_free_delegation_callback).
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
A client sends offset to MDS as it was seen by DS. As result,
file size after copy is only half of original file size in case
of 2 DS.
Signed-off-by: Vitaliy Gusev <gusev.vitaliy@nexenta.com>
Cc: stable@kernel.org [2.6.39]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Hi Trond,
In nfs_update_inode debug output, print the current and new inode
size when the file size changes on the NFS server.
Signed-off-by: Harshula Jayasuriya <harshula@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Currently, the call to nfs4_schedule_session_recovery() will actually just
result in a test of the lease when what we really want is to force a
session reset.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@kernel.org
Currently, if the server returns NFS4ERR_EXPIRED in reply to a READ or
WRITE, but the RENEW test determines that the lease is still active, we
fail to recover and end up looping forever in a READ/WRITE + RENEW death
spiral.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@kernel.org
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: (58 commits)
Btrfs: use the device_list_mutex during write_dev_supers
Btrfs: setup free ino caching in a more asynchronous way
btrfs scrub: don't coalesce pages that are logically discontiguous
Btrfs: return -ENOMEM in clear_extent_bit
Btrfs: add mount -o auto_defrag
Btrfs: using rcu lock in the reader side of devices list
Btrfs: drop unnecessary device lock
Btrfs: fix the race between remove dev and alloc chunk
Btrfs: fix the race between reading and updating devices
Btrfs: fix bh leak on __btrfs_open_devices path
Btrfs: fix unsafe usage of merge_state
Btrfs: allocate extent state and check the result properly
fs/btrfs: Add missing btrfs_free_path
Btrfs: check return value of btrfs_inc_extent_ref()
Btrfs: return error to caller if read_one_inode() fails
Btrfs: BUG_ON is deleted from the caller of btrfs_truncate_item & btrfs_extend_item
Btrfs: return error code to caller when btrfs_del_item fails
Btrfs: return error code to caller when btrfs_previous_item fails
btrfs: fix typo 'testeing' -> 'testing'
btrfs: typo: 'btrfS' -> 'btrfs'
...
As Jeff just pointed out, __constant_cpu_to_le32 was required instead of
cpu_to_le32 in previous patch to cifsacl.c 383c55350f
(Fix endian error comparing authusers when cifsacl enabled)
CC: Stable <stable@kernel.org>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
CC: Shirish Pargaonkar <shirishp@us.ibm.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
[CIFS] Fix endian error comparing authusers when cifsacl enabled
[CIFS] Rename three structures to avoid camel case
Fix extended security auth failure
CIFS: Add rwpidforward mount option
CIFS: Migrate to shared superblock model
[CIFS] Migrate from prefixpath logic
CIFS: Fix memory leak in cifs_do_mount
[CIFS] When mandatory encryption on share, fail mount
CIFS: Use pid saved from cifsFileInfo in writepages and set_file_size
cifs: add cifs_async_writev
cifs: clean up wsize negotiation and allow for larger wsize
cifs: convert cifs_writepages to use async writes
CIFS: Fix undefined behavior when mount fails
cifs: don't call mid_q_entry->callback under the Global_MidLock (try #5)
CIFS: Simplify mount code for further shared sb capability
CIFS: Simplify connection structure search calls
cifs: remove unused SMB2 config and mount options
cifs: add ignore_pend flag to cifs_call_async
cifs: make cifs_send_async take a kvec array
cifs: consolidate SendReceive response checks
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2:
Ocfs2/move_extents: Validate moving goal after the adjustment.
Ocfs2/move_extents: Avoid doing division in extent moving.
The buffers allocated while encrypting and decrypting long filenames can
sometimes straddle two pages. In this situation, virt_to_scatterlist()
will return -ENOMEM, causing the operation to fail and the user will get
scary error messages in their logs:
kernel: ecryptfs_write_tag_70_packet: Internal error whilst attempting
to convert filename memory to scatterlist; expected rc = 1; got rc =
[-12]. block_aligned_filename_size = [272]
kernel: ecryptfs_encrypt_filename: Error attempting to generate tag 70
packet; rc = [-12]
kernel: ecryptfs_encrypt_and_encode_filename: Error attempting to
encrypt filename; rc = [-12]
kernel: ecryptfs_lookup: Error attempting to encrypt and encode
filename; rc = [-12]
The solution is to allow up to 2 scatterlist entries to be used.
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Cc: <stable@kernel.org>
eCryptfs wasn't clearing the eCryptfs inode's i_nlink after a successful
vfs_rmdir() on the lower directory. This resulted in the inode evict and
destroy paths to be missed.
https://bugs.launchpad.net/ecryptfs/+bug/723518
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Cc: <stable@kernel.org>
Fix sparse warning:
CHECK fs/cifs/cifsacl.c
fs/cifs/cifsacl.c:41:36: warning: incorrect type in initializer
(different base types)
fs/cifs/cifsacl.c:41:36: expected restricted __le32
fs/cifs/cifsacl.c:41:36: got int
fs/cifs/cifsacl.c:461:52: warning: restricted __le32 degrades to integer
fs/cifs/cifsacl.c:461:73: warning: restricted __le32 degrades to integer
The second one looks harmless but the first one (sid_authusers)
was added in commit 2fbc2f1729
and only affects 2.6.38/2.6.39
CC: Stable <stable@kernel.org>
Reviewed-and-Tested-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
This change introduces a few of the less controversial /proc and
/proc/sys interfaces for tile, along with sysfs attributes for
various things that were originally proposed as /proc/tile files.
It also adjusts the "hardwall" proc API.
Arnd Bergmann reviewed the initial arch/tile submission, which
included a complete set of all the /proc/tile and /proc/sys/tile
knobs that we had added in a somewhat ad hoc way during initial
development, and provided feedback on where most of them should go.
One knob turned out to be similar enough to the existing
/proc/sys/debug/exception-trace that it was re-implemented to use
that model instead.
Another knob was /proc/tile/grid, which reported the "grid" dimensions
of a tile chip (e.g. 8x8 processors = 64-core chip). Arnd suggested
looking at sysfs for that, so this change moves that information
to a pair of sysfs attributes (chip_width and chip_height) in the
/sys/devices/system/cpu directory. We also put the "chip_serial"
and "chip_revision" information from our old /proc/tile/board file
as attributes in /sys/devices/system/cpu.
Other information collected via hypervisor APIs is now placed in
/sys/hypervisor. We create a /sys/hypervisor/type file (holding the
constant string "tilera") to be parallel with the Xen use of
/sys/hypervisor/type holding "xen". We create three top-level files,
"version" (the hypervisor's own version), "config_version" (the
version of the configuration file), and "hvconfig" (the contents of
the configuration file). The remaining information from our old
/proc/tile/board and /proc/tile/switch files becomes an attribute
group appearing under /sys/hypervisor/board/.
Finally, after some feedback from Arnd Bergmann for the previous
version of this patch, the /proc/tile/hardwall file is split up into
two conceptual parts. First, a directory /proc/tile/hardwall/ which
contains one file per active hardwall, each file named after the
hardwall's ID and holding a cpulist that says which cpus are enclosed by
the hardwall. Second, a /proc/PID file "hardwall" that is either
empty (for non-hardwall-using processes) or contains the hardwall ID.
Finally, this change pushes the /proc/sys/tile/unaligned_fixup/
directory, with knobs controlling the kernel code for handling the
fixup of unaligned exceptions.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
write_dev_supers was changed to use RCU to protect the list of
devices, but it was then sleeping while it actually wrote the supers.
This fixes it to just use the mutex, since we really don't any
concurrency in write_dev_supers anyway.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Move the lock order description after all the includes, remove several
fairly outdated and/or incorrect comments, move Andrea's
copyright/changelog to the top where it belongs, remove the pointless
filename in the top of the file comment, and remove to useless macros.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The descriptions of bio_add_page() and bio_add_pc_page() are slightly
inconsistent; improve them.
Signed-off-by: Andreas Gruenbacher <agruen@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Return -ENODATA when trying to read a user.* attribute which cannot
exist: user space otherwise does not have a reasonable way to
distinguish between non-existent and inaccessible attributes.
Likewise, return -ENODATA when an unprivileged process tries to read a
trusted.* attribute: to unprivileged processes, those attributes are
invisible (listxattr() won't include them).
Related to this bug report: https://bugzilla.redhat.com/660613
Signed-off-by: Andreas Gruenbacher <agruen@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Tell the filesystem if we just updated timestamp (I_DIRTY_SYNC) or
anything else, so that the filesystem can track internally if it
needs to push out a transaction for fdatasync or not.
This is just the prototype change with no user for it yet. I plan
to push large XFS changes for the next merge window, and getting
this trivial infrastructure in this window would help a lot to avoid
tree interdependencies.
Also remove incorrect comments that ->dirty_inode can't block. That
has been changed a long time ago, and many implementations rely on it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
... and kill a useless local variable in follow_dotdot_rcu(), while
we are at it - follow_mount_rcu(nd, path, inode) *always* assigned
value to *inode, and always it had been path->dentry->d_inode (aka
nd->path.dentry->d_inode, since it always got &nd->path as the second
argument).
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
though the goal_to_be_moved will be validated again in following moving, it's
still a good idea to validate it after adjustment at the very beginning, instead
of validating it before adjustment.
Signed-off-by: Tristan Ye <tristan.ye@oracle.com>
It's not wise enough to do a 64bits division anywhere in kernside, replace it
with a decent helper or proper shifts.
Signed-off-by: Tristan Ye <tristan.ye@oracle.com>
Fix authentication failures using extended security mechanisms.
cifs client does not take into consideration extended security bit
in capabilities field in negotiate protocol response from the server.
Please refer to Samba bugzilla 8046.
Reported-and-tested by: Werner Maes <Werner.Maes@icts.kuleuven.be>
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Add rwpidforward mount option that switches on a mode when we forward
pid of a process who opened a file to any read and write operation.
This can prevent applications like WINE from failing on read or write
operation on a previously locked file region from the same netfd from
another process if we use mandatory brlock style.
It is actual for WINE because during a run of WINE program two processes
work on the same netfd - share the same file struct between several VFS
fds:
1) WINE-server does open and lock;
2) WINE-application does read and write.
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Add cifs_match_super to use in sget to share superblock between mounts
that have the same //server/sharename, credentials and mount options.
It helps us to improve performance on work with future SMB2.1 leases.
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Now we point superblock to a server share root and set a root dentry
appropriately. This let us share superblock between mounts like
//server/sharename/foo/bar and //server/sharename/foo further.
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
* git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-linus:
Squashfs: update email address
Squashfs: add extra sanity checks at mount time
Squashfs: add sanity checks to fragment reading at mount time
Squashfs: add sanity checks to lookup table reading at mount time
Squashfs: add sanity checks to id reading at mount time
Squashfs: add sanity checks to xattr reading at mount time
Squashfs: reverse order of filesystem table reading
Squashfs: move table allocation into squashfs_read_table()
The kernel automatically evaluates partition tables of storage devices.
The code for evaluating GUID partitions (in fs/partitions/efi.c) contains
a bug that causes a kernel oops on certain corrupted GUID partition
tables.
This bug has security impacts, because it allows, for example, to
prepare a storage device that crashes a kernel subsystem upon connecting
the device (e.g., a "USB Stick of (Partial) Death").
crc = efi_crc32((const unsigned char *) (*gpt), le32_to_cpu((*gpt)->header_size));
computes a CRC32 checksum over gpt covering (*gpt)->header_size bytes.
There is no validation of (*gpt)->header_size before the efi_crc32 call.
A corrupted partition table may have large values for (*gpt)->header_size.
In this case, the CRC32 computation access memory beyond the memory
allocated for gpt, which may cause a kernel heap overflow.
Validate value of GUID partition table header size.
[akpm@linux-foundation.org: fix layout and indenting]
Signed-off-by: Timo Warns <warns@pre-sense.de>
Cc: Matt Domsch <Matt_Domsch@dell.com>
Cc: Eugene Teo <eugeneteo@kernel.sg>
Cc: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The balloon driver in a Xen guest frees guest pages and marks them as
mmio. When the kernel crashes and the crash kernel attempts to read the
oldmem via /proc/vmcore a read from ballooned pages will generate 100%
load in dom0 because Xen asks qemu-dm for the page content. Since the
reads come in as 8byte requests each ballooned page is tried 512 times.
With this change a hook can be registered which checks wether the given
pfn is really ram. The hook has to return a value > 0 for ram pages, a
value < 0 on error (because the hypercall is not known) and 0 for non-ram
pages.
This will reduce the time to read /proc/vmcore. Without this change a
512M guest with 128M crashkernel region needs 200 seconds to read it, with
this change it takes just 2 seconds.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, pagemap_read() has three error and/or corner case handling
mistake.
(1) If ppos parameter is wrong, mm refcount will be leak.
(2) If count parameter is 0, mm refcount will be leak too.
(3) If the current task is sleeping in kmalloc() and the system
is out of memory and oom-killer kill the proc associated task,
mm_refcount prevent the task free its memory. then system may
hang up.
<Quote Hugh's explain why we shold call kmalloc() before get_mm()>
check_mem_permission gets a reference to the mm. If we
__get_free_page after check_mem_permission, imagine what happens if the
system is out of memory, and the mm we're looking at is selected for
killing by the OOM killer: while we wait in __get_free_page for more
memory, no memory is freed from the selected mm because it cannot reach
exit_mmap while we hold that reference.
This patch fixes the above three.
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jovi Zhang <bookjovi@gmail.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Stephen Wilson <wilsons@start.ca>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It whould be better if put check_mem_permission after __get_free_page in
mem_write, to be same as function mem_read.
Hugh Dickins explained the reason.
check_mem_permission gets a reference to the mm. If we __get_free_page
after check_mem_permission, imagine what happens if the system is out
of memory, and the mm we're looking at is selected for killing by the
OOM killer: while we wait in __get_free_page for more memory, no memory
is freed from the selected mm because it cannot reach exit_mmap while
we hold that reference.
Reported-by: Jovi Zhang <bookjovi@gmail.com>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Stephen Wilson <wilsons@start.ca>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is a macro for the max size kmalloc can allocate, so use it instead
of a hardcoded number.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
No need for this local array to be writable, so mark it const.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now, exe_file is not proc FS dependent, so we can use it to name core
file. So we add %E pattern for core file name cration which extract path
from mm_struct->exe_file. Then it converts slashes to exclamation marks
and pastes the result to the core file name itself.
This is useful for environments where binary names are longer than 16
character (the current->comm limitation). Also where there are binaries
with same name but in a different path. Further in case the binery itself
changes its current->comm after exec.
So by doing (s/$/#/ -- # is treated as git comment):
$ sysctl kernel.core_pattern='core.%p.%e.%E'
$ ln /bin/cat cat45678901234567890
$ ./cat45678901234567890
^Z
$ rm cat45678901234567890
$ fg
^\Quit (core dumped)
$ ls core*
we now get:
core.2434.cat456789012345.!root!cat45678901234567890 (deleted)
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Reviewed-by: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Setup and cleanup of mm_struct->exe_file is currently done in fs/proc/.
This was because exe_file was needed only for /proc/<pid>/exe. Since we
will need the exe_file functionality also for core dumps (so core name can
contain full binary path), built this functionality always into the
kernel.
To achieve that move that out of proc FS to the kernel/ where in fact it
should belong. By doing that we can make dup_mm_exe_file static. Also we
can drop linux/proc_fs.h inclusion in fs/exec.c and kernel/fork.c.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Two new stats in per-memcg memory.stat which tracks the number of page
faults and number of major page faults.
"pgfault"
"pgmajfault"
They are different from "pgpgin"/"pgpgout" stat which count number of
pages charged/discharged to the cgroup and have no meaning of reading/
writing page to disk.
It is valuable to track the two stats for both measuring application's
performance as well as the efficiency of the kernel page reclaim path.
Counting pagefaults per process is useful, but we also need the aggregated
value since processes are monitored and controlled in cgroup basis in
memcg.
Functional test: check the total number of pgfault/pgmajfault of all
memcgs and compare with global vmstat value:
$ cat /proc/vmstat | grep fault
pgfault 1070751
pgmajfault 553
$ cat /dev/cgroup/memory.stat | grep fault
pgfault 1071138
pgmajfault 553
total_pgfault 1071142
total_pgmajfault 553
$ cat /dev/cgroup/A/memory.stat | grep fault
pgfault 199
pgmajfault 0
total_pgfault 199
total_pgmajfault 0
Performance test: run page fault test(pft) wit 16 thread on faulting in
15G anon pages in 16G container. There is no regression noticed on the
"flt/cpu/s"
Sample output from pft:
TAG pft:anon-sys-default:
Gb Thr CLine User System Wall flt/cpu/s fault/wsec
15 16 1 0.67s 233.41s 14.76s 16798.546 266356.260
+-------------------------------------------------------------------------+
N Min Max Median Avg Stddev
x 10 16682.962 17344.027 16913.524 16928.812 166.5362
+ 10 16695.568 16923.896 16820.604 16824.652 84.816568
No difference proven at 95.0% confidence
[akpm@linux-foundation.org: fix build]
[hughd@google.com: shmem fix]
Signed-off-by: Ying Han <yinghan@google.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Originally i_lastfrag was 32 bits but then we added support for handling
64 bit metadata and it became a 64 bit variable. That was during 2007, in
54fb996ac1 "[PATCH] ufs2 write: block allocation update". Unfortunately
these casts got left behind so the value got truncated to 32 bit again.
[akpm@linux-foundation.org: remove now-unneeded min_t/max_t casting]
Signed-off-by: Dan Carpenter <error27@gmail.com>
Cc: Evgeniy Dushistov <dushistov@mail.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For a filesystem that has lots of files in it, the first time we mount
it with free ino caching support, it can take quite a long time to
setup the caching before we can create new files.
Here we fill the cache with [highest_ino, BTRFS_LAST_FREE_OBJECTID]
before we start the caching thread to search through the extent tree.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
scrub_page collects several pages into one bio as long as they are physically
contiguous. As we only save one logical address for the whole bio, don't
collect pages that are physically contiguous but logically discontiguous.
Signed-off-by: Arne Jansen <sensille@gmx.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
This will detect small random writes into files and
queue the up for an auto defrag process. It isn't well suited to
database workloads yet, but works for smaller files such as rpm, sqlite
or bdb databases.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
* 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
gfs2: Drop __TIME__ usage
isdn/diva: Drop __TIME__ usage
atm: Drop __TIME__ usage
dlm: Drop __TIME__ usage
wan/pc300: Drop __TIME__ usage
parport: Drop __TIME__ usage
hdlcdrv: Drop __TIME__ usage
baycom: Drop __TIME__ usage
pmcraid: Drop __DATE__ usage
edac: Drop __DATE__ usage
rio: Drop __DATE__ usage
scsi/wd33c93: Drop __TIME__ usage
scsi/in2000: Drop __TIME__ usage
aacraid: Drop __TIME__ usage
media/cx231xx: Drop __TIME__ usage
media/radio-maxiradio: Drop __TIME__ usage
nozomi: Drop __TIME__ usage
cyclades: Drop __TIME__ usage
Eric Dumazet reports:
----
At boot, I have a crash in part_discard_alignment_show+0x1b/0x50
CR2 : 000006ac
fault in : mov 0x2c(%rcx),%edx
I suspect commit 23ceb5b771 (block: Remove extra
discard_alignment from hd_struct) being in fault
----
Not quite known how ->queue can be NULL while the sysfs entry
exists, but lets play it safe and check for a NULL queue.
The rest of the sysfs show strategies in check.c do not dereference
disk->queue.
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
When mandatory encryption is configured in samba server on a
share (smb.conf parameter "smb encrypt = mandatory") the
server will hang up the tcp session when we try to send
the first frame after the tree connect if it is not a
QueryFSUnixInfo, this causes cifs mount to hang (it must
be killed with ctl-c). Move the QueryFSUnixInfo call
earlier in the mount sequence, and check whether the SetFSUnixInfo
fails due to mandatory encryption so we can return a sensible
error (EACCES) on mount.
In a future patch (for 2.6.40) we will support mandatory
encryption.
CC: Stable <stable@kernel.org>
Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
We need it to make them work with mandatory locking style because
we can fail in a situation like when kernel need to flush dirty pages
and there is a lock held by a process who opened file.
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: (28 commits)
Ocfs2: Teach local-mounted ocfs2 to handle unwritten_extents correctly.
ocfs2/dlm: Do not migrate resource to a node that is leaving the domain
ocfs2/dlm: Add new dlm message DLM_BEGIN_EXIT_DOMAIN_MSG
Ocfs2/move_extents: Set several trivial constraints for threshold.
Ocfs2/move_extents: Let defrag handle partial extent moving.
Ocfs2/move_extents: move/defrag extents within a certain range.
Ocfs2/move_extents: helper to calculate the defraging length in one run.
Ocfs2/move_extents: move entire/partial extent.
Ocfs2/move_extents: helpers to update the group descriptor and global bitmap inode.
Ocfs2/move_extents: helper to probe a proper region to move in an alloc group.
Ocfs2/move_extents: helper to validate and adjust moving goal.
Ocfs2/move_extents: find the victim alloc group, where the given #blk fits.
Ocfs2/move_extents: defrag a range of extent.
Ocfs2/move_extents: move a range of extent.
Ocfs2/move_extents: lock allocators and reserve metadata blocks and data clusters for extents moving.
Ocfs2/move_extents: Add basic framework and source files for extent moving.
Ocfs2/move_extents: Adding new ioctl code 'OCFS2_IOC_MOVE_EXT' to ocfs2.
Ocfs2/refcounttree: Publicize couple of funcs from refcounttree.c
Ocfs2: Add a new code 'OCFS2_INFO_FREEFRAG' for o2info ioctl.
Ocfs2: Add a new code 'OCFS2_INFO_FREEINODE' for o2info ioctl.
...
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/djm/tmem:
xen: cleancache shim to Xen Transcendent Memory
ocfs2: add cleancache support
ext4: add cleancache support
btrfs: add cleancache support
ext3: add cleancache support
mm/fs: add hooks to support cleancache
mm: cleancache core ops functions and config
fs: add field to superblock to support cleancache
mm/fs: cleancache documentation
Fix up trivial conflict in fs/btrfs/extent_io.c due to includes
* 'for-linus' of git://oss.sgi.com/xfs/xfs:
xfs: correctly decrement the extent buffer index in xfs_bmap_del_extent
xfs: check for valid indices in xfs_iext_get_ext and xfs_iext_idx_to_irec
xfs: fix up asserts in xfs_iflush_fork
xfs: do not do pointer arithmetic on extent records
xfs: do not use unchecked extent indices in xfs_bunmapi
xfs: do not use unchecked extent indices in xfs_bmapi
xfs: do not use unchecked extent indices in xfs_bmap_add_extent_*
xfs: remove if_lastex
xfs: remove the unused XFS_BMAPI_RSVBLOCKS flag
xfs: do not discard alloc btree blocks
xfs: add online discard support
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (61 commits)
jbd2: Add MAINTAINERS entry
jbd2: fix a potential leak of a journal_head on an error path
ext4: teach ext4_ext_split to calculate extents efficiently
ext4: Convert ext4 to new truncate calling convention
ext4: do not normalize block requests from fallocate()
ext4: enable "punch hole" functionality
ext4: add "punch hole" flag to ext4_map_blocks()
ext4: punch out extents
ext4: add new function ext4_block_zero_page_range()
ext4: add flag to ext4_has_free_blocks
ext4: reserve inodes and feature code for 'quota' feature
ext4: add support for multiple mount protection
ext4: ensure f_bfree returned by ext4_statfs() is non-negative
ext4: protect bb_first_free in ext4_trim_all_free() with group lock
ext4: only load buddy bitmap in ext4_trim_fs() when it is needed
jbd2: Fix comment to match the code in jbd2__journal_start()
ext4: fix waiting and sending of a barrier in ext4_sync_file()
jbd2: Add function jbd2_trans_will_send_data_barrier()
jbd2: fix sending of data flush on journal commit
ext4: fix ext4_ext_fiemap_cb() to handle blocks before request range correctly
...
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (25 commits)
cifs: remove unnecessary dentry_unhash on rmdir/rename_dir
ocfs2: remove unnecessary dentry_unhash on rmdir/rename_dir
exofs: remove unnecessary dentry_unhash on rmdir/rename_dir
nfs: remove unnecessary dentry_unhash on rmdir/rename_dir
ext2: remove unnecessary dentry_unhash on rmdir/rename_dir
ext3: remove unnecessary dentry_unhash on rmdir/rename_dir
ext4: remove unnecessary dentry_unhash on rmdir/rename_dir
btrfs: remove unnecessary dentry_unhash in rmdir/rename_dir
ceph: remove unnecessary dentry_unhash calls
vfs: clean up vfs_rename_other
vfs: clean up vfs_rename_dir
vfs: clean up vfs_rmdir
vfs: fix vfs_rename_dir for FS_RENAME_DOES_D_MOVE filesystems
libfs: drop unneeded dentry_unhash
vfs: update dentry_unhash() comment
vfs: push dentry_unhash on rename_dir into file systems
vfs: push dentry_unhash on rmdir into file systems
vfs: remove dget() from dentry_unhash()
vfs: dentry_unhash immediately prior to rmdir
vfs: Block mmapped writes while the fs is frozen
...
The type of vma->vm_flags is 'unsigned long'. Neither 'int' nor
'unsigned int'. This patch fixes such misuse.
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
[ Changed to use a typedef - we'll extend it to cover more cases
later, since there has been discussion about making it a 64-bit
type.. - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This eighth patch of eight in this cleancache series "opts-in"
cleancache for ocfs2. Clustered filesystems must explicitly enable
cleancache by calling cleancache_init_shared_fs anytime an instance
of the filesystem is mounted. Ocfs2 is currently the only user of
the clustered filesystem interface but nevertheless, the cleancache
hooks in the VFS layer are sufficient for ocfs2 including the matching
cleancache_flush_fs hook which must be called on unmount.
Details and a FAQ can be found in Documentation/vm/cleancache.txt
[v8: trivial merge conflict update]
[v5: jeremy@goop.org: simplify init hook and any future fs init changes]
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Reviewed-by: Jeremy Fitzhardinge <jeremy@goop.org>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Rik Van Riel <riel@redhat.com>
Cc: Jan Beulich <JBeulich@novell.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Andreas Dilger <adilger@sun.com>
Cc: Ted Tso <tytso@mit.edu>
Cc: Nitin Gupta <ngupta@vflare.org>
This seventh patch of eight in this cleancache series "opts-in"
cleancache for ext4. Filesystems must explicitly enable cleancache
by calling cleancache_init_fs anytime an instance of the filesystem
is mounted. For ext4, all other cleancache hooks are in
the VFS layer including the matching cleancache_flush_fs
hook which must be called on unmount.
Details and a FAQ can be found in Documentation/vm/cleancache.txt
[v6-v8: no changes]
[v5: jeremy@goop.org: simplify init hook and any future fs init changes]
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Reviewed-by: Jeremy Fitzhardinge <jeremy@goop.org>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Andreas Dilger <adilger@sun.com>
Cc: Ted Ts'o <tytso@mit.edu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Rik Van Riel <riel@redhat.com>
Cc: Jan Beulich <JBeulich@novell.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <joel.becker@oracle.com>
Cc: Nitin Gupta <ngupta@vflare.org>
This sixth patch of eight in this cleancache series "opts-in"
cleancache for btrfs. Filesystems must explicitly enable
cleancache by calling cleancache_init_fs anytime an instance
of the filesystem is mounted. Btrfs uses its own readpage
which must be hooked, but all other cleancache hooks are in
the VFS layer including the matching cleancache_flush_fs hook
which must be called on unmount.
Details and a FAQ can be found in Documentation/vm/cleancache.txt
[v6-v8: no changes]
[v5: jeremy@goop.org: simplify init hook and any future fs init changes]
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Reviewed-by: Jeremy Fitzhardinge <jeremy@goop.org>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Rik Van Riel <riel@redhat.com>
Cc: Jan Beulich <JBeulich@novell.com>
Cc: Andreas Dilger <adilger@sun.com>
Cc: Ted Ts'o <tytso@mit.edu>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <joel.becker@oracle.com>
Cc: Nitin Gupta <ngupta@vflare.org>
This fifth patch of eight in this cleancache series "opts-in"
cleancache for ext3. Filesystems must explicitly enable
cleancache by calling cleancache_init_fs anytime an instance
of the filesystem is mounted. For ext3, all other cleancache
hooks are in the VFS layer including the matching cleancache_flush_fs
hook which must be called on unmount.
Details and a FAQ can be found in Documentation/vm/cleancache.txt
[v6-v8: no changes]
[v5: jeremy@goop.org: simplify init hook and any future fs init changes]
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Reviewed-by: Jeremy Fitzhardinge <jeremy@goop.org>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Andreas Dilger <adilger@sun.com>
Cc: Ted Ts'o <tytso@mit.edu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Rik Van Riel <riel@redhat.com>
Cc: Jan Beulich <JBeulich@novell.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <joel.becker@oracle.com>
Cc: Nitin Gupta <ngupta@vflare.org>
This fourth patch of eight in this cleancache series provides the
core hooks in VFS for: initializing cleancache per filesystem;
capturing clean pages reclaimed by page cache; attempting to get
pages from cleancache before filesystem read; and ensuring coherency
between pagecache, disk, and cleancache. Note that the placement
of these hooks was stable from 2.6.18 to 2.6.38; a minor semantic
change was required due to a patchset in 2.6.39.
All hooks become no-ops if CONFIG_CLEANCACHE is unset, or become
a check of a boolean global if CONFIG_CLEANCACHE is set but no
cleancache "backend" has claimed cleancache_ops.
Details and a FAQ can be found in Documentation/vm/cleancache.txt
[v8: minchan.kim@gmail.com: adapt to new remove_from_page_cache function]
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Reviewed-by: Jeremy Fitzhardinge <jeremy@goop.org>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Rik Van Riel <riel@redhat.com>
Cc: Jan Beulich <JBeulich@novell.com>
Cc: Andreas Dilger <adilger@sun.com>
Cc: Ted Ts'o <tytso@mit.edu>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <joel.becker@oracle.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Cifs has no problems with lingering references to unlinked directory
inodes.
CC: Steve French <sfrench@samba.org>
CC: linux-cifs@vger.kernel.org
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Ocfs2 has no issues with lingering references to unlinked directory inodes.
CC: Mark Fasheh <mfasheh@suse.com>
CC: ocfs2-devel@oss.oracle.com
Acked-by: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Josef Bacik
Jeff Layton
Sage Weil
Linus Torvalds
Theodore Ts'o
Al Viro
Casey Bodley
Randy Dunlap
J. Bruce Fields
Darren Salt
Vasily Averin
Lukas Czerner
Yongqiang Yang
David Sterba
Chris Mason
Arne Jansen
liubo
Suresh Jayaraman
Ben Gardiner
Artem Bityutskiy
Tejun Heo
Robert Richter
OGAWA Hirofumi
Jens Axboe
Tyler Hicks
Boaz Harrosh
Benny Halevy
Andy Adamson
J. Bruce Fields
Marc Eshel
Jim Rees
Phillip Lougher
Andi Kleen
Andreas Gruenbacher
Darrick J. Wong
Chuck Lever
Lai Jiangshan
Vitaliy Gusev
Harshula Jayasuriya
Trond Myklebust
Steve French
Chris Metcalf
Christoph Hellwig
Joel Becker
Tristan Ye
Pavel Shilovsky
Timo Warns
Olaf Hering
KOSAKI Motohiro
Yuanhan Liu
Mike Frysinger
Alexey Dobriyan
Jiri Slaby
Ying Han
Dan Carpenter
Li Zefan
Dan Magenheimer