Граф коммитов

31 Коммитов

Автор SHA1 Сообщение Дата
Steven Rostedt (VMware) bb730b5833 tracing: Fix SPDX format headers to use C++ style comments
The Linux kernel adopted the SPDX License format headers to ease license
compliance management, and uses the C++ '//' style comments for the SPDX
header tags. Some files in the tracing directory used the C style /* */
comments for them. To be consistent across all files, replace the /* */
C style SPDX tags with the C++ // SPDX tags.

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-08-16 19:08:06 -04:00
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Steven Rostedt (Red Hat) ef92480a58 tracing: Turn seq_print_user_ip() into a static function
seq_print_user_ip() is used in only one location in one file. Turn it into a
static function. We could inject its code into the caller, but that would
make the code a bit too complex. Keep the code separate.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-09-28 10:16:12 -04:00
Steven Rostedt (Red Hat) 6b1032d53c tracing: Inject seq_print_userip_objs() into its only user
seq_print_userip_objs() is used only in one location, in one file. Instead
of having it as an external function, go one further than making it static,
but inject is code into its only user. It doesn't make the calling function
much more complex.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-09-28 10:11:44 -04:00
Steven Rostedt (Red Hat) 9023c93090 tracing: Rename (un)register_ftrace_event() to (un)register_trace_event()
The name "ftrace" really refers to the function hook infrastructure. It
is not about the trace_events. The functions (un)register_ftrace_event() is
really about trace_events, and the name should be register_trace_event()
instead.

Also renamed ftrace_event_reg() to trace_event_reg() for the same reason.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-13 14:05:14 -04:00
Steven Rostedt (Red Hat) 19a7fe2062 tracing: Add trace_seq_has_overflowed() and trace_handle_return()
Adding a trace_seq_has_overflowed() which returns true if the trace_seq
had too much written into it allows us to simplify the code.

Instead of checking the return value of every call to trace_seq_printf()
and friends, they can all be called normally, and at the end we can
return !trace_seq_has_overflowed() instead.

Several functions also return TRACE_TYPE_PARTIAL_LINE when the trace_seq
overflowed and TRACE_TYPE_HANDLED otherwise. Another helper function
was created called trace_handle_return() which takes a trace_seq and
returns these enums. Using this helper function also simplifies the
code.

This change also makes it possible to remove the return values of
trace_seq_printf() and friends. They should instead just be
void functions.

Link: http://lkml.kernel.org/r/20141114011410.365183157@goodmis.org

Reviewed-by: Petr Mladek <pmladek@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-19 15:25:39 -05:00
Steven Rostedt (Red Hat) 6d2289f3fa tracing: Make trace_seq_putmem_hex() more robust
Currently trace_seq_putmem_hex() can only take as a parameter a pointer
to something that is 8 bytes or less, otherwise it will overflow the
buffer. This is protected by a macro that encompasses the call to
trace_seq_putmem_hex() that has a BUILD_BUG_ON() for the variable before
it is passed in. This is not very robust and if trace_seq_putmem_hex() ever
gets used outside that macro it will cause issues.

Instead of only being able to produce a hex output of memory that is for
a single word, change it to be more robust and allow any size input.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-07-01 07:13:37 -04:00
Steven Rostedt (Red Hat) 12306276fa tracing: Move the trace_seq_* functions into its own trace_seq.c file
The trace_seq_*() functions are a nice utility that allows users to manipulate
buffers with printf() like formats. It has its own trace_seq.h header in
include/linux and should be in its own file. Being tied with trace_output.c
is rather awkward.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-07-01 07:13:35 -04:00
zhangwei(Jovi) 52f6ad6dc3 tracing: Rename trace_event_mutex to trace_event_sem
trace_event_mutex is an rw semaphore now, not a mutex, change the name.

Link: http://lkml.kernel.org/r/513D843B.40109@huawei.com

Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
[ Forward ported to my new code ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-15 13:22:10 -04:00
Steven Rostedt (Red Hat) 09ae72348e tracing: Add trace_puts() for even faster trace_printk() tracing
The trace_printk() is extremely fast and is very handy as it can be
used in any context (including NMIs!). But it still requires scanning
the fmt string for parsing the args. Even the trace_bprintk() requires
a scan to know what args will be saved, although it doesn't copy the
format string itself.

Several times trace_printk() has no args, and wastes cpu cycles scanning
the fmt string.

Adding trace_puts() allows the developer to use an even faster
tracing method that only saves the pointer to the string in the
ring buffer without doing any format parsing at all. This will
help remove even more of the "Heisenbug" effect, when debugging.

Also fixed up the F_printk()s for the ftrace internal bprint and print events.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-15 00:35:55 -04:00
Steven Rostedt a9a5776380 tracing: Allow events to share their print functions
Multiple events may use the same method to print their data.
Instead of having all events have a pointer to their print funtions,
the trace_event structure now points to a trace_event_functions structure
that will hold the way to print ouf the event.

The event itself is now passed to the print function to let the print
function know what kind of event it should print.

This opens the door to consolidating the way several events print
their output.

   text	   data	    bss	    dec	    hex	filename
4913961	1088356	 861512	6863829	 68bbd5	vmlinux.orig
4900382	1048964	 861512	6810858	 67ecea	vmlinux.init
4900446	1049028	 861512	6810986	 67ed6a	vmlinux.preprint

This change slightly increases the size but is needed for the next change.

v3: Fix the branch tracer events to handle this change.

v2: Fix the new function graph tracer event calls to handle this change.

Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-05-14 14:20:32 -04:00
Steven Rostedt f81c972d27 tracing: consolidate code between trace_output.c and trace_function_graph.c
Both trace_output.c and trace_function_graph.c do basically the same
thing to handle the printing of the latency-format. This patch moves
the code into one function that both can use.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-09-11 14:24:13 -04:00
Steven Rostedt 110bf2b764 tracing: add protection around module events unload
When reading the trace buffer, there is a race that when a module
is unloaded it removes events that is stilled referenced in the buffers.
This patch adds the protection around the unloading of the events
from modules and the reading of the trace buffers.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-09 17:29:07 -04:00
Lai Jiangshan 4f5359685a tracing: add trace_event_read_lock()
I found that there is nothing to protect event_hash in
ftrace_find_event(). Rcu protects the event hashlist
but not the event itself while we use it after its extraction
through ftrace_find_event().

This lack of a proper locking in this spot opens a race
window between any event dereferencing and module removal.

Eg:

--Task A--

print_trace_line(trace) {
  event = find_ftrace_event(trace)

--Task B--

trace_module_remove_events(mod) {
  list_trace_events_module(ev, mod) {
    unregister_ftrace_event(ev->event) {
      hlist_del(ev->event->node)
        list_del(....)
    }
  }
}
|--> module removed, the event has been dropped

--Task A--

  event->print(trace); // Dereferencing freed memory

If the event retrieved belongs to a module and this module
is concurrently removed, we may end up dereferencing a data
from a freed module.

RCU could solve this, but it would add latency to the kernel and
forbid tracers output callbacks to call any sleepable code.
So this fix converts 'trace_event_mutex' to a read/write semaphore,
and adds trace_event_read_lock() to protect ftrace_find_event().

[ Impact: fix possible freed memory dereference in ftrace ]

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <4A114806.7090302@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-05-25 23:53:41 +02:00
Steven Rostedt 97f2025153 tracing/events: move declarations from trace directory to core include
In preparation to allowing trace events to happen in modules, we need
to move some of the local declarations in the kernel/trace directory
into include/linux.

This patch simply moves the declarations and performs no context changes.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-14 12:57:58 -04:00
Steven Rostedt 9504504cba tracing: make trace_seq operations available for core kernel
In the process to make TRACE_EVENT macro work for modules, the trace_seq
operations must be available for core kernel code.

These operations are quite useful and can be used for other implementations.

The main idea is that we create a trace_seq handle that acts very much
like the seq_file handle.

	struct trace_seq *s = kmalloc(sizeof(*s, GFP_KERNEL);

	trace_seq_init(s);
	trace_seq_printf(s, "some data %d\n", variable);

	printk("%s", s->buffer);

The main use is to allow a top level function call several other functions
that may store printf like data into the buffer. Then at the end, the top
level function can process all the data with any method it would like to.
It could be passed to userspace, output via printk or even use seq_file:

	trace_seq_to_user(s, ubuf, cnt);
	seq_puts(m, s->buffer);

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-14 12:57:57 -04:00
Ingo Molnar 93776a8ec7 Merge branch 'linus' into tracing/core
Merge reason: update to upstream tracing facilities

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-07 13:47:45 +02:00
Li Zefan b14b70a6a4 trace: make argument 'mem' of trace_seq_putmem() const
Impact: fix build warning

I passed a const value to trace_seq_putmem(), and I got compile warning.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-31 17:45:13 +02:00
Eduard - Gabriel Munteanu f285901bb2 tracing: add missing 'extern' keywords to trace_output.h
Impact: cleanup

Many declarations within trace_output.h are missing the 'extern' keyword
in an inconsistent manner. This adds 'extern' where it should be.

Signed-off-by: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-31 17:45:07 +02:00
Eduard - Gabriel Munteanu bdd6df6af9 tracing: provide trace_seq_reserve()
trace_seq_reserve() allows a caller to reserve space in a trace_seq and
write directly into it. This makes it easier to export binary data to
userspace via the tracing interface, by simply filling in a struct.

Signed-off-by: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-31 17:45:02 +02:00
Steven Rostedt 0706f1c48c tracing: adding function timings to function profiler
If the function graph trace is enabled, the function profiler will
use it to take the timing of the functions.

 cat /debug/tracing/trace_stat/functions

  Function                               Hit    Time
  --------                               ---    ----
  mwait_idle                             127    183028.4 us
  schedule                                26    151997.7 us
  __schedule                              31    151975.1 us
  sys_wait4                                2    74080.53 us
  do_wait                                  2    74077.80 us
  sys_newlstat                           138    39929.16 us
  do_path_lookup                         179    39845.79 us
  vfs_lstat_fd                           138    39761.97 us
  user_path_at                           153    39469.58 us
  path_walk                              179    39435.76 us
  __link_path_walk                       189    39143.73 us
[...]

Note the times are skewed due to the function graph tracer not taking
into account schedules.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-24 23:41:09 -04:00
Steven Rostedt 5ef841f6f3 tracing: make print_(b)printk_msg_only global
This patch makes print_printk_msg_only and print_bprintk_msg_only
global for other functions to use. It also renames them by adding
a "trace_" to the beginning to avoid namespace collisions.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-19 15:57:55 -04:00
Frederic Weisbecker 769b0441f4 tracing/core: drop the old trace_printk() implementation in favour of trace_bprintk()
Impact: faster and lighter tracing

Now that we have trace_bprintk() which is faster and consume lesser
memory than trace_printk() and has the same purpose, we can now drop
the old implementation in favour of the binary one from trace_bprintk(),
which means we move all the implementation of trace_bprintk() to
trace_printk(), so the Api doesn't change except that we must now use
trace_seq_bprintk() to print the TRACE_PRINT entries.

Some changes result of this:

- Previously, trace_bprintk depended of a single tracer and couldn't
  work without. This tracer has been dropped and the whole implementation
  of trace_printk() (like the module formats management) is now integrated
  in the tracing core (comes with CONFIG_TRACING), though we keep the file
  trace_printk (previously trace_bprintk.c) where we can find the module
  management. Thus we don't overflow trace.c

- changes some parts to use trace_seq_bprintk() to print TRACE_PRINT entries.

- change a bit trace_printk/trace_vprintk macros to support non-builtin formats
  constants, and fix 'const' qualifiers warnings. But this is all transparent for
  developers.

- etc...

V2:

- Rebase against last changes
- Fix mispell on the changelog

V3:

- Rebase against last changes (moving trace_printk() to kernel.h)

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1236356510-8381-5-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-06 17:59:12 +01:00
Steven Rostedt 5fd73f8624 tracing: remove extra latency_trace method from trace structure
Impact: clean up

The trace and latency_trace function pointers are identical for
every tracer but the function tracer. The differences in the function
tracer are trivial (latency output puts paranthesis around parent).

This patch removes the latency_trace pointer and all prints will
now just use the trace output function pointer.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-04 21:42:04 -05:00
Arnaldo Carvalho de Melo ae7462b4f1 trace: make the trace_event callbacks return enum print_line_t
As they actually all return these enumerators.

Reported-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-04 20:48:39 +01:00
Arnaldo Carvalho de Melo 2c9b238eb3 trace: Change struct trace_event callbacks parameter list
Impact: API change

The trace_seq and trace_entry are in trace_iterator, where there are
more fields that may be needed by tracers, so just pass the
tracer_iterator as is already the case for struct tracer->print_line.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-03 14:03:52 +01:00
Frederic Weisbecker c4a8e8be2d trace: better manage the context info for events
Impact: make trace_event more convenient for tracers

All tracers (for the moment) that use the struct trace_event want to
have the context info printed before their own output: the pid/cmdline,
cpu, and timestamp.

But some other tracers that want to implement their trace_event
callbacks will not necessary need these information or they may want to
format them as they want.

This patch adds a new default-enabled trace option:
TRACE_ITER_CONTEXT_INFO When disabled through:

echo nocontext-info > /debugfs/tracing/trace_options

The pid, cpu and timestamps headers will not be printed.

IE with the sched_switch tracer with context-info (default):

     bash-2935 [001] 100.356561: 2935:120:S ==> [001]  0:140:R <idle>
   <idle>-0    [000] 100.412804:    0:140:R   + [000] 11:115:S events/0
   <idle>-0    [000] 100.412816:    0:140:R ==> [000] 11:115:R events/0
 events/0-11   [000] 100.412829:   11:115:S ==> [000]  0:140:R <idle>

Without context-info:

 2935:120:S ==> [001]  0:140:R <idle>
    0:140:R   + [000] 11:115:S events/0
    0:140:R ==> [000] 11:115:R events/0
   11:115:S ==> [000]  0:140:R <idle>

A tracer can disable it at runtime by clearing the bit
TRACE_ITER_CONTEXT_INFO in trace_flags.

The print routines were renamed to trace_print_context and
trace_print_lat_context, so that they can be used by tracers if they
want to use them for one of the trace_event callbacks.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-03 14:03:52 +01:00
Steven Rostedt c37abc5515 trace: add gcc printf check to trace_seq_printf
Andrew Morton suggested adding a printf checker to trace_seq_printf
since there are a number of users that have improper format arguments.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-16 12:17:29 +01:00
Lai Jiangshan 6c1a99afbd ftrace: fix trace_output
Impact: fix bug for handling partial line

trace_seq_printf(), seq_print_userip_objs(), ... return
0          -- partial line was written
other(>0)  -- success

duplicate output is also removed in trace_print_raw().

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-16 12:15:20 +01:00
Steven Rostedt f633cef020 ftrace: change trace.c to use registered events
Impact: rework trace.c to use new event register API

Almost every ftrace event has to implement its output display in
trace.c through a different function. Some events did not handle
all the formats (trace, latency-trace, raw, hex, binary), and
this method does not scale well.

This patch converts the format functions to use the event API to
find the event and and print its format. Currently, we have
a print function for trace, latency_trace, raw, hex and binary.
A trace_nop_print is available if the event wants to avoid output
on a particular format.

Perhaps other tracers could use this in the future (like mmiotrace and
function_graph).

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-29 12:46:12 +01:00
Steven Rostedt f0868d1e23 ftrace: set up trace event hash infrastructure
Impact: simplify/generalize/refactor trace.c

The trace.c file is becoming more difficult to maintain due to the
growing number of events. There is several formats that an event may
be printed. This patch sets up the infrastructure of an event hash to
allow for events to register how they should be printed.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-29 12:46:11 +01:00