The new registration method allows to get power values from the DT OPP
definition. The new OPP entry property "opp-microwatt" contains total
power expressed in micro-Watts. Align the EM documentation with this
new possible registration method of EM.
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Merge an operating performance points (OPP) update, devfreq updates
and power capping updates for 5.17-rc1:
- Update outdated OPP documentation (Tang Yizhou).
- Reduce log severity for informative message regarding frequency
transition failures in devfreq (Tzung-Bi Shih).
- Add DRAM frequency controller devfreq driver for Allwinner sunXi
SoCs (Samuel Holland).
- Add missing COMMON_CLK dependency to the sun8i devfreq driver (Arnd
Bergmann).
- Add support for new layout of Psys PowerLimit Register on SPR to
the Intel RAPL power capping driver (Zhang Rui).
- Fix typo in a comment in idle_inject.c (Jason Wang).
- Remove unused function definition from the DTPM (Dynamit Thermal
Power Management) power capping framework (Daniel Lezcano).
- Reduce DTPM trace verbosity (Daniel Lezcano).
* pm-opp:
Documentation: power: Update outdated contents in opp.rst
* pm-devfreq:
PM / devfreq: Reduce log severity for informative message
PM / devfreq: sun8i: addd COMMON_CLK dependency
PM / devfreq: Add a driver for the sun8i/sun50i MBUS
* powercap:
powercap/drivers/dtpm: Reduce trace verbosity
powercap/drivers/dtpm: Remove unused function definition
powercap: fix typo in a comment in idle_inject.c
powercap: intel_rapl: support new layout of Psys PowerLimit Register on SPR
Pull OPP (operating performance points) updates for 5.17-rc1 from Viresh
Kumar:
"This updates the documentation to match the latest code."
* 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
Documentation: power: Update outdated contents in opp.rst
Three problems have been revised:
1. CONFIG_PM_OPP no longer depends on CONFIG_PM.
2. opp_find_freq_{ceil, floor} is renamed as dev_pm_opp_find_freq_{ceil,
floor}.
3. Make it clear that the 'opp' struct is actually dev_pm_opp.
Signed-off-by: Tang Yizhou <tangyizhou@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
In some cases (for example, during system-wide suspend and resume of
devices) it is useful to know whether or not runtime PM has ever been
enabled for a given device and, if so, what the runtime PM status of
it had been right before runtime PM was disabled for it last time.
For this reason, introduce a new struct dev_pm_info field called
last_status that will be used for capturing the runtime PM status of
the device when its power.disable_depth counter changes from 0 to 1.
The new field will be set to RPM_INVALID to start with and whenever
power.disable_depth changes from 1 to 0, so it will be valid only
when runtime PM of the device is currently disabled, but it has been
enabled at least once.
Immediately use power.last_status in rpm_resume() to make it handle
the case when PM runtime is disabled for the device, but its runtime
PM status is RPM_ACTIVE more consistently. Namely, make it return 1
if power.last_status is also equal to RPM_ACTIVE in that case (the
idea being that if the status was RPM_ACTIVE last time when
power.disable_depth was changing from 0 to 1 and it is still
RPM_ACTIVE, it can be assumed to reflect what happened to the device
last time when it was using runtime PM) and -EACCES otherwise.
Update the documentation to provide a description of last_status and
change the description of pm_runtime_resume() in it to reflect the
new behavior of rpm_active().
While at it, rearrange the code in pm_runtime_enable() to be more
straightforward and replace the WARN() macro in it with a pr_warn()
invocation which is less disruptive.
Link: https://lore.kernel.org/linux-pm/20211026222626.39222-1-ulf.hansson@linaro.org/t/#u
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The Energy Model (EM) can be registered in two ways:
1) Using a helper function, which under the hood relies on OPP framework
and DT entry in CPU node: 'dynamic-power-coefficient'. This is
a 'simple' EM because it's tied to the math formula:
Power = dynamic-power-coefficient * V^2 * f
2) Using em_dev_register_perf_domain() API function with a driver
custom callback which provides power for each performance state.
This is 'advanced' EM, since it can better reflect real power
measurements for each performance state. It's not limited to any
math formula and can better reflect real physics of the device.
Add description of these two methods to the documentation, so developers
could choose the suitable registration method (option).
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The Energy Model (EM) registration for CPUs should now be done using
a dedicated callback added recently into CPUFreq framework and drivers.
Commit c17495b01b ("cpufreq: Add callback to register with energy model")
The callback guaranties that the EM registration is called at the right
time during driver setup. To avoid mistakes update the documentation
to align with the existing code implementation.
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Improve the existing documentation of the Energy Model and add kernel-doc
comments. This extends an API description and helps better understanding
the usage.
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Recent changes to the PM core allows ->runtime_suspend|resume callbacks to
be unassigned.
In the earlier behaviour the PM core would return -ENOSYS, when trying to
runtime resume a device, for example. Let's update the documentation to
clarify this.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
pm_runtime_get_sync(), contradictory to intuition, does not drop the
runtime PM usage counter on errors which lead to several wrong usages in
drivers (missing the put). pm_runtime_resume_and_get() was added as a
better implementation so document the preference of using it, hoping it
will stop bad patterns.
Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
[ rjw: Documentation change edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
battery/charger driver changes:
* core: provide function stubs if CONFIG_POWER_SUPPLY=n
* core: reduce loglevel for probe defer info
* surface-battery: new battery driver for Surface
* surface-charger: new charger driver for Surface
* bq27xxx: add bq78z100 support
* bq27xxx: fix current_now/power_avg for newer chips
* cw2015: add CHARGE_NOW support
* ab8500: drop pdata support
* convert most DT bindings to YAML
* lot's of minor fixes and cleanups
reset drivers:
* ltc2952-poweroff: make trigger delay configurable from DT
* minor fixes and cleanups
-----BEGIN PGP SIGNATURE-----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=9IUN
-----END PGP SIGNATURE-----
Merge tag 'for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"battery/charger driver changes:
- core:
- provide function stubs if CONFIG_POWER_SUPPLY=n
- reduce loglevel for probe defer info
- surface:
- new battery and charger drivers for Surface
- bq27xxx:
- add bq78z100 support
- fix current_now/power_avg for newer chips
- cw2015:
- add CHARGE_NOW support
- ab8500:
- drop pdata support
- convert most DT bindings to YAML
- lots of minor fixes and cleanups
reset drivers:
- ltc2952-poweroff:
- make trigger delay configurable from DT
- minor fixes and cleanups"
* tag 'for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (97 commits)
power: supply: cpcap-battery: fix invalid usage of list cursor
power: supply: bq256xx: add kerneldoc for structure members
power: supply: act8945a: correct kerneldoc
power: supply: max17040: remove unneeded double cast
power: supply: max17040: handle device_property_read_u8_array() failure
power: supply: max14577: remove unneeded variable initialization
power: supply: surface-charger: Make symbol 'surface_ac_pm_ops' static
power: supply: surface-battery: Make some symbols static
power: reset: restart-poweroff: Add missing MODULE_DEVICE_TABLE
power: reset: hisi-reboot: add missing MODULE_DEVICE_TABLE
power: supply: s3c_adc_battery: fix possible use-after-free in s3c_adc_bat_remove()
power: supply: generic-adc-battery: fix possible use-after-free in gab_remove()
power: supply: Add AC driver for Surface Aggregator Module
power: supply: Add battery driver for Surface Aggregator Module
power: supply: bq25980: Move props from battery node
power: supply: core: Use true and false for bool variable
power: supply: goldfish: Remove the GOLDFISH dependency
power: reset: ltc2952: make trigger delay configurable
power: supply: cpcap-charger: Simplify bool conversion
power: supply: cpcap-charger: Add usleep to cpcap charger to avoid usb plug bounce
...
Commit dd8088d5a8 ("PM: runtime: Add pm_runtime_resume_and_get to
deal with usage counter") added a new runtime-PM API function without
updating the documentation in runtime_pm.rst.
Add the missing documentation.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Fixes: dd8088d5a8 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- As promised, the minimum Sphinx version to build the docs is now 1.7,
and we have dropped support for Python 2 entirely. That allowed the
removal of a bunch of compatibility code.
- A set of treewide warning fixups from Mauro that I applied after it
became clear nobody else was going to deal with them.
- The automarkup mechanism can now create cross-references from relative
paths to RST files.
- More translations, typo fixes, and warning fixes.
No conflicts with any other tree as far as I know.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmAq4EUPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YTIAH/1I5MlVQwuvNKjwCAEdmltQgHv6SmXSpDkrp
SGuviWVXxqz8dTyo7C2R12qE/7nP8zGAmclNdX78ynl5qWaj05lQsjBgMYSoQO/F
+akyLQSL8/8SQrtDPPBcboPuIz9DzkX51kkQthvCf0puJi0ScKVHO9Sk9SKUgDoK
cnCE9VwpGL7YX/ee2wt91UYREijgJ9P7eQ6rqKvUZ5Itu9ikfu9vQU41GR9tOXDK
MQK+k38pWdl8wRgTgA0pkVhMf1G732bxTTicvFHXcyqmCkh7++m2+ysT8O+SBBMX
e5BbP0yysSqThjwFHOW5PWM1AWD5iVz+pnwJwEaJ4K76tJJOw9M=
=bcDk
-----END PGP SIGNATURE-----
Merge tag 'docs-5.12' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"It has been a relatively quiet cycle in docsland.
- As promised, the minimum Sphinx version to build the docs is now
1.7, and we have dropped support for Python 2 entirely. That
allowed the removal of a bunch of compatibility code.
- A set of treewide warning fixups from Mauro that I applied after it
became clear nobody else was going to deal with them.
- The automarkup mechanism can now create cross-references from
relative paths to RST files.
- More translations, typo fixes, and warning fixes"
* tag 'docs-5.12' of git://git.lwn.net/linux: (75 commits)
docs: kernel-hacking: be more civil
docs: Remove the Microsoft rhetoric
Documentation/admin-guide: kernel-parameters: Update nohlt section
doc/admin-guide: fix spelling mistake: "perfomance" -> "performance"
docs: Document cross-referencing using relative path
docs: Enable usage of relative paths to docs on automarkup
docs: thermal: fix spelling mistakes
Documentation: admin-guide: Update kvm/xen config option
docs: Make syscalls' helpers naming consistent
coding-style.rst: Avoid comma statements
Documentation: /proc/loadavg: add 3 more field descriptions
Documentation/submitting-patches: Add blurb about backtraces in commit messages
Docs: drop Python 2 support
Move our minimum Sphinx version to 1.7
Documentation: input: define ABS_PRESSURE/ABS_MT_PRESSURE resolution as grams
scripts/kernel-doc: add internal hyperlink to DOC: sections
Update Documentation/admin-guide/sysctl/fs.rst
docs: Update DTB format references
docs: zh_CN: add iio index.rst translation
docs/zh_CN: add iio ep93xx_adc.rst translation
...
* powercap:
powercap: intel_rapl: Use topology interface in rapl_init_domains()
powercap: intel_rapl: Use topology interface in rapl_add_package()
powercap/intel_rapl: add support for AlderLake Mobile
powercap/drivers/dtpm: Fix size of object being allocated
powercap/drivers/dtpm: Fix an IS_ERR() vs NULL check
powercap/drivers/dtpm: Fix some missing unlock bugs
powercap/drivers/dtpm: Fix a double shift bug
powercap/drivers/dtpm: Fix __udivdi3 and __aeabi_uldivmod unresolved symbols
powercap/drivers/dtpm: Add CPU energy model based support
powercap/drivers/dtpm: Add API for dynamic thermal power management
Documentation/powercap/dtpm: Add documentation for dtpm
units: Add Watt units
* pm-misc:
PM: Kconfig: remove unneeded "default n" options
PM: EM: update Kconfig description and drop "default n" option
Fix minor typos and grammatical issues.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Replace the lkml.org links with lore to better use a single source
that's more likely to stay available long-term.
Done by bash script:
cvt_lkml_to_lore ()
{
tmpfile=$(mktemp ./.cvt_links.XXXXXXX)
header=$(echo $1 | sed 's@/lkml/@/lkml/headers/@')
wget -qO - $header > $tmpfile
if [[ $? == 0 ]] ; then
link=$(grep -i '^Message-Id:' $tmpfile | head -1 | \
sed -r -e 's/^\s*Message-Id:\s*<\s*//' -e 's/\s*>\s*$//' -e 's@^@https://lore.kernel.org/r/@')
# echo "testlink: $link"
if [ -n "$link" ] ; then
wget -qO - $link > /dev/null
if [[ $? == 0 ]] ; then
echo $link
fi
fi
fi
rm -f $tmpfile
}
git grep -P -o "\bhttps?://(?:www.)?lkml.org/lkml[\/\w]+" $@ |
while read line ; do
echo $line
file=$(echo $line | cut -f1 -d':')
link=$(echo $line | cut -f2- -d':')
newlink=$(cvt_lkml_to_lore $link)
if [[ -n "$newlink" ]] ; then
sed -i -e "s#\b$link\b#$newlink#" $file
fi
done
Link: https://lore.kernel.org/patchwork/patch/1265849/#1462688
Signed-off-by: Joe Perches <joe@perches.com>
Link: https://lore.kernel.org/r/77cdb7f32cfb087955bfc3600b86c40bed5d4104.camel@perches.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The dynamic thermal and power management is a technique to dynamically
adjust the power consumption of different devices in order to ensure a
global thermal constraint.
An userspace daemon is usually monitoring the temperature and the
power to take immediate action on the device.
The DTPM framework provides an unified API to userspace to act on the
power.
Document this framework.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Update description and meaning of a new flag, which indicates the type of
power scale used for a registered Energy Model (EM) device.
Reviewed-by: Quentin Perret <qperret@google.com>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The Energy Model (EM) can store power values in milli-Watts or in abstract
scale. This might cause issues in the subsystems which use the EM for
estimating the device power, such as:
- mixing of different scales in a subsystem which uses multiple
(cooling) devices (e.g. thermal Intelligent Power Allocation (IPA))
- assuming that energy [milli-Joules] can be derived from the EM power
values which might not be possible since the power scale doesn't have
to be in milli-Watts
To avoid misconfiguration add the requisite documentation to the EM and
related subsystems: EAS and IPA.
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
PCI devices support two variants of the D3 power state: D3hot (main power
present) D3cold (main power removed). Previously struct pci_dev contained:
unsigned int d3_delay; /* D3->D0 transition time in ms */
unsigned int d3cold_delay; /* D3cold->D0 transition time in ms */
"d3_delay" refers specifically to the D3hot state. Rename it to
"d3hot_delay" to avoid ambiguity and align with the ACPI "_DSM for
Specifying Device Readiness Durations" in the PCI Firmware spec r3.2,
sec 4.6.9.
There is no change to the functionality.
Link: https://lore.kernel.org/r/20200730210848.1578826-1-kw@linux.com
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* pm-sleep:
PM: sleep: spread "const char *" correctness
PM: hibernate: fix white space in a few places
freezer: Add unsafe version of freezable_schedule_timeout_interruptible() for NFS
PM: sleep: core: Emit changed uevent on wakeup_sysfs_add/remove
* pm-domains:
PM: domains: Restore comment indentation for generic_pm_domain.child_links
PM: domains: Fix up terminology with parent/child
* powercap:
powercap: Add Power Limit4 support
powercap: idle_inject: Replace play_idle() with play_idle_precise() in comments
powercap: intel_rapl: add support for Sapphire Rapids
* pm-tools:
pm-graph v5.7 - important s2idle fixes
cpupower: Replace HTTP links with HTTPS ones
cpupower: Fix NULL but dereferenced coccicheck errors
cpupower: Fix comparing pointer to 0 coccicheck warns
Modern Intel Mobile platforms support power limit4 (PL4), which is
the SoC package level maximum power limit (in Watts). It can be used
to preemptively limits potential SoC power to prevent power spikes
from tripping the power adapter and battery over-current protection.
This patch enables this feature by exposing package level peak power
capping control to userspace via RAPL sysfs interface. With this,
application like DTPF can modify PL4 power limit, the similar way
of other package power limit (PL1).
As this feature is not tested on previous generations, here it is
enabled only for the platform that has been verified to work,
for safety concerns.
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Co-developed-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The Energy Model framework supports also other devices than CPUs. Update
related information and add description for the new usage.
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Quentin Perret <qperret@google.com>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Rework the system-wide PM driver flags to make them easier to
understand and use and update their documentation (Rafael Wysocki,
Alan Stern).
- Allow cpuidle governors to be switched at run time regardless of
the kernel configuration and update the related documentation
accordingly (Hanjun Guo).
- Improve the resume device handling in the user space hibernarion
interface code (Domenico Andreoli).
- Document the intel-speed-select sysfs interface (Srinivas
Pandruvada).
- Make the ACPI code handing suspend to idle print more debug
messages to help diagnose issues with it (Rafael Wysocki).
- Fix a helper routine in the cpufreq core and correct a typo in
the struct cpufreq_driver kerneldoc comment (Rafael Wysocki, Wang
Wenhu).
- Update cpufreq drivers:
* Make the intel_pstate driver start in the passive mode by
default on systems without HWP (Rafael Wysocki).
* Add i.MX7ULP support to the imx-cpufreq-dt driver and add
i.MX7ULP to the cpufreq-dt-platdev blacklist (Peng Fan).
* Convert the qoriq cpufreq driver to a platform one, make the
platform code create a suitable device object for it and add
platform dependencies to it (Mian Yousaf Kaukab, Geert
Uytterhoeven).
* Fix wrong compatible binding in the qcom driver (Ansuel Smith).
* Build the omap driver by default for ARCH_OMAP2PLUS (Anders
Roxell).
* Add r8a7742 SoC support to the dt cpufreq driver (Lad Prabhakar).
- Update cpuidle core and drivers:
* Fix three reference count leaks in error code paths in the
cpuidle core (Qiushi Wu).
* Convert Qualcomm SPM to a generic cpuidle driver (Stephan
Gerhold).
* Fix up the execution order when entering a domain idle state in
the PSCI driver (Ulf Hansson).
- Fix a reference counting issue related to clock management and
clean up two oddities in the PM-runtime framework (Rafael Wysocki,
Andy Shevchenko).
- Add ElkhartLake support to the Intel RAPL power capping driver
and remove an unused local MSR definition from it (Jacob Pan,
Sumeet Pawnikar).
- Update devfreq core and drivers:
* Replace strncpy() with strscpy() in the devfreq core and use
lockdep asserts instead of manual checks for a locked mutex in
it (Dmitry Osipenko, Krzysztof Kozlowski).
* Add a generic imx bus scaling driver and make it register an
interconnect device (Leonard Crestez, Gustavo A. R. Silva).
* Make the cpufreq notifier in the tegra30 driver take boosting
into account and delete an unuseful error message from that
driver (Dmitry Osipenko, Markus Elfring).
- Remove unneeded semicolon from the cpupower code (Zou Wei).
-----BEGIN PGP SIGNATURE-----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=APdj
-----END PGP SIGNATURE-----
Merge tag 'pm-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These rework the system-wide PM driver flags, make runtime switching
of cpuidle governors easier, improve the user space hibernation
interface code, add intel-speed-select interface documentation, add
more debug messages to the ACPI code handling suspend to idle, update
the cpufreq core and drivers, fix a minor issue in the cpuidle core
and update two cpuidle drivers, improve the PM-runtime framework,
update the Intel RAPL power capping driver, update devfreq core and
drivers, and clean up the cpupower utility.
Specifics:
- Rework the system-wide PM driver flags to make them easier to
understand and use and update their documentation (Rafael Wysocki,
Alan Stern).
- Allow cpuidle governors to be switched at run time regardless of
the kernel configuration and update the related documentation
accordingly (Hanjun Guo).
- Improve the resume device handling in the user space hibernarion
interface code (Domenico Andreoli).
- Document the intel-speed-select sysfs interface (Srinivas
Pandruvada).
- Make the ACPI code handing suspend to idle print more debug
messages to help diagnose issues with it (Rafael Wysocki).
- Fix a helper routine in the cpufreq core and correct a typo in the
struct cpufreq_driver kerneldoc comment (Rafael Wysocki, Wang
Wenhu).
- Update cpufreq drivers:
- Make the intel_pstate driver start in the passive mode by
default on systems without HWP (Rafael Wysocki).
- Add i.MX7ULP support to the imx-cpufreq-dt driver and add
i.MX7ULP to the cpufreq-dt-platdev blacklist (Peng Fan).
- Convert the qoriq cpufreq driver to a platform one, make the
platform code create a suitable device object for it and add
platform dependencies to it (Mian Yousaf Kaukab, Geert
Uytterhoeven).
- Fix wrong compatible binding in the qcom driver (Ansuel Smith).
- Build the omap driver by default for ARCH_OMAP2PLUS (Anders
Roxell).
- Add r8a7742 SoC support to the dt cpufreq driver (Lad
Prabhakar).
- Update cpuidle core and drivers:
- Fix three reference count leaks in error code paths in the
cpuidle core (Qiushi Wu).
- Convert Qualcomm SPM to a generic cpuidle driver (Stephan
Gerhold).
- Fix up the execution order when entering a domain idle state in
the PSCI driver (Ulf Hansson).
- Fix a reference counting issue related to clock management and
clean up two oddities in the PM-runtime framework (Rafael Wysocki,
Andy Shevchenko).
- Add ElkhartLake support to the Intel RAPL power capping driver and
remove an unused local MSR definition from it (Jacob Pan, Sumeet
Pawnikar).
- Update devfreq core and drivers:
- Replace strncpy() with strscpy() in the devfreq core and use
lockdep asserts instead of manual checks for a locked mutex in
it (Dmitry Osipenko, Krzysztof Kozlowski).
- Add a generic imx bus scaling driver and make it register an
interconnect device (Leonard Crestez, Gustavo A. R. Silva).
- Make the cpufreq notifier in the tegra30 driver take boosting
into account and delete an unuseful error message from that
driver (Dmitry Osipenko, Markus Elfring).
- Remove unneeded semicolon from the cpupower code (Zou Wei)"
* tag 'pm-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (51 commits)
cpuidle: Fix three reference count leaks
PM: runtime: Replace pm_runtime_callbacks_present()
PM / devfreq: Use lockdep asserts instead of manual checks for locked mutex
PM / devfreq: imx-bus: Fix inconsistent IS_ERR and PTR_ERR
PM / devfreq: Replace strncpy with strscpy
PM / devfreq: imx: Register interconnect device
PM / devfreq: Add generic imx bus scaling driver
PM / devfreq: tegra30: Delete an error message in tegra_devfreq_probe()
PM / devfreq: tegra30: Make CPUFreq notifier to take into account boosting
PM: hibernate: Restrict writes to the resume device
PM: runtime: clk: Fix clk_pm_runtime_get() error path
cpuidle: Convert Qualcomm SPM driver to a generic CPUidle driver
ACPI: EC: PM: s2idle: Extend GPE dispatching debug message
ACPI: PM: s2idle: Print type of wakeup debug messages
powercap: RAPL: remove unused local MSR define
PM: runtime: Make clear what we do when conditions are wrong in rpm_suspend()
Documentation: admin-guide: pm: Document intel-speed-select
PM: hibernate: Split off snapshot dev option
PM: hibernate: Incorporate concurrency handling
Documentation: ABI: make current_governer_ro as a candidate for removal
...
The single user could have called freeze_secondary_cpus() directly.
Since this function was a source of confusion, remove it as it's
just a pointless wrapper.
While at it, rename enable_nonboot_cpus() to thaw_secondary_cpus() to
preserve the naming symmetry.
Done automatically via:
git grep -l enable_nonboot_cpus | xargs sed -i 's/enable_nonboot_cpus/thaw_secondary_cpus/g'
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Link: https://lkml.kernel.org/r/20200430114004.17477-1-qais.yousef@arm.com
Update the documentation of the driver flags for system-wide power
management to reflect the current code flows and be more consistent.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rename DPM_FLAG_LEAVE_SUSPENDED to DPM_FLAG_MAY_SKIP_RESUME which
matches its purpose more closely.
No functional impact.
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Wolfram Sang <wsa@the-dreams.de> # for I2C
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Rename DPM_FLAG_NEVER_SKIP to DPM_FLAG_NO_DIRECT_COMPLETE which
matches its purpose more closely.
No functional impact.
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # for PCI parts
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
The name of dev_pm_may_skip_resume() may be easily confused with the
power.may_skip_resume flag which is not checked by that function, so
rename the former as dev_pm_skip_resume().
No functional impact.
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
The current code in device_resume_noirq() causes the entire early
resume and resume phases of device suspend to be skipped for
devices for which the noirq resume phase have been skipped (due
to the LEAVE_SUSPENDED flag being set) on the premise that those
devices should stay in runtime-suspend after system-wide resume.
However, that may not be correct in two situations. First, the
middle layer (subsystem) noirq resume callback may be missing for
a given device, but its early resume callback may be present and it
may need to do something even if it decides to skip the driver
callback. Second, if the device's wakeup settings were adjusted
in the suspend phase without resuming the device (that was in
runtime suspend at that time), they most likely need to be
adjusted again in the resume phase and so the driver callback
in that phase needs to be run.
For the above reason, modify the core to allow the middle layer
->resume_late callback to run even if its ->resume_noirq callback
is missing (and the core has skipped the driver-level callback
in that phase) and to allow all device callbacks to run in the
resume phase. Also make the core set the PM-runtime status of
devices with SMART_SUSPEND set whose resume callbacks are not
skipped to "active" in the "noirq" resume phase and update the
affected subsystems (PCI and ACPI) accordingly.
After this change, middle-layer (subsystem) callbacks will always
be invoked in all phases of system suspend and resume and driver
callbacks will always run in the prepare, suspend, resume, and
complete phases for all devices.
For devices with SMART_SUSPEND set, driver callbacks will be
skipped in the late and noirq phases of system suspend if those
devices remain in runtime suspend in __device_suspend_late().
Driver callbacks will also be skipped for them during the
noirq and early phases of the "thaw" transition related to
hibernation in that case.
Setting LEAVE_SUSPENDED means that the driver allows its callbacks
to be skipped in the noirq and early phases of system resume, but
some additional conditions need to be met for that to happen (among
other things, the power.may_skip_resume flag needs to be set for the
device during system suspend for the driver callbacks to be skipped
during the subsequent resume transition).
For all devices with SMART_SUSPEND set whose driver callbacks are
invoked during system resume, the PM-runtime status will be set to
"active" (by the core).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Correctly document how the SNAPSHOT_GET_IMAGE_SIZE and
SNAPSHOT_AVAIL_SWAP_SIZE ioctls return their result.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
pm_runtime_get_if_in_use() bumps up the PM-runtime usage count if it
is not equal to zero and the device's PM-runtime status is 'active'.
This works for drivers that do not use autoidle, but for those that
do, the function returns zero even when the device is active.
In order to maintain sane device state while the device is powered on
in the hope that it'll be needed, pm_runtime_get_if_active(dev, true)
returns a positive value if the device's PM-runtime status is 'active'
when it is called, in which case it also increments the device's usage
count.
If the second argument of pm_runtime_get_if_active() is 'false', the
function behaves just like pm_runtime_get_if_in_use(), so redefine
the latter as a wrapper around the former.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix Sphinx warnings by indenting the bullet list (and making it
unnumbered).
Documentation/power/pm_qos_interface.rst:12: WARNING: Unexpected indentation.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It has been merged into sleep-states.rst.
Fixes: c21502efda ("Documentation: admin-guide: PM: Update sleep states documentation")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Update the PM QoS documentation to reflect the previous code changes
regarding the removal of PM QoS classes and the CPU latency QoS API
rework.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Tested-by: Amit Kucheria <amit.kucheria@linaro.org>
There is some information in Documentation/power/interface.rst that
is still missing from Documentation/admin-guide/pm/sleep-states.rst
and really should be present in there, so update the latter by
adding that information to it and delete the former (as it becomes
redundant after that and it is somewhat outdated).
While at it, clean up some assorted pieces of sleep-states.rst a bit.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-----BEGIN PGP SIGNATURE-----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=uUXw
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Warn if a host bridge has no NUMA info (Yunsheng Lin)
- Add PCI_STD_NUM_BARS for the number of standard BARs (Denis
Efremov)
Resource management:
- Fix boot-time Embedded Controller GPE storm caused by incorrect
resource assignment after ACPI Bus Check Notification (Mika
Westerberg)
- Protect pci_reassign_bridge_resources() against concurrent
addition/removal (Benjamin Herrenschmidt)
- Fix bridge dma_ranges resource list cleanup (Rob Herring)
- Add "pci=hpmmiosize" and "pci=hpmmioprefsize" parameters to control
the MMIO and prefetchable MMIO window sizes of hotplug bridges
independently (Nicholas Johnson)
- Fix MMIO/MMIO_PREF window assignment that assigned more space than
desired (Nicholas Johnson)
- Only enforce bus numbers from bridge EA if the bridge has EA
devices downstream (Subbaraya Sundeep)
- Consolidate DT "dma-ranges" parsing and convert all host drivers to
use shared parsing (Rob Herring)
Error reporting:
- Restore AER capability after resume (Mayurkumar Patel)
- Add PoisonTLPBlocked AER counter (Rajat Jain)
- Use for_each_set_bit() to simplify AER code (Andy Shevchenko)
- Fix AER kernel-doc (Andy Shevchenko)
- Add "pcie_ports=dpc-native" parameter to allow native use of DPC
even if platform didn't grant control over AER (Olof Johansson)
Hotplug:
- Avoid returning prematurely from sysfs requests to enable or
disable a PCIe hotplug slot (Lukas Wunner)
- Don't disable interrupts twice when suspending hotplug ports (Mika
Westerberg)
- Fix deadlocks when PCIe ports are hot-removed while suspended (Mika
Westerberg)
Power management:
- Remove unnecessary ASPM locking (Bjorn Helgaas)
- Add support for disabling L1 PM Substates (Heiner Kallweit)
- Allow re-enabling Clock PM after it has been disabled (Heiner
Kallweit)
- Add sysfs attributes for controlling ASPM link states (Heiner
Kallweit)
- Remove CONFIG_PCIEASPM_DEBUG, including "link_state" and "clk_ctl"
sysfs files (Heiner Kallweit)
- Avoid AMD FCH XHCI USB PME# from D0 defect that prevents wakeup on
USB 2.0 or 1.1 connect events (Kai-Heng Feng)
- Move power state check out of pci_msi_supported() (Bjorn Helgaas)
- Fix incorrect MSI-X masking on resume and revert related nvme quirk
for Kingston NVME SSD running FW E8FK11.T (Jian-Hong Pan)
- Always return devices to D0 when thawing to fix hibernation with
drivers like mlx4 that used legacy power management (previously we
only did it for drivers with new power management ops) (Dexuan Cui)
- Clear PCIe PME Status even for legacy power management (Bjorn
Helgaas)
- Fix PCI PM documentation errors (Bjorn Helgaas)
- Use dev_printk() for more power management messages (Bjorn Helgaas)
- Apply D2 delay as milliseconds, not microseconds (Bjorn Helgaas)
- Convert xen-platform from legacy to generic power management (Bjorn
Helgaas)
- Removed unused .resume_early() and .suspend_late() legacy power
management hooks (Bjorn Helgaas)
- Rearrange power management code for clarity (Rafael J. Wysocki)
- Decode power states more clearly ("4" or "D4" really refers to
"D3cold") (Bjorn Helgaas)
- Notice when reading PM Control register returns an error (~0)
instead of interpreting it as being in D3hot (Bjorn Helgaas)
- Add missing link delays required by the PCIe spec (Mika Westerberg)
Virtualization:
- Move pci_prg_resp_pasid_required() to CONFIG_PCI_PRI (Bjorn
Helgaas)
- Allow VFs to use PRI (the PF PRI is shared by the VFs, but the code
previously didn't recognize that) (Kuppuswamy Sathyanarayanan)
- Allow VFs to use PASID (the PF PASID capability is shared by the
VFs, but the code previously didn't recognize that) (Kuppuswamy
Sathyanarayanan)
- Disconnect PF and VF ATS enablement, since ATS in PFs and
associated VFs can be enabled independently (Kuppuswamy
Sathyanarayanan)
- Cache PRI and PASID capability offsets (Kuppuswamy Sathyanarayanan)
- Cache the PRI PRG Response PASID Required bit (Bjorn Helgaas)
- Consolidate ATS declarations in linux/pci-ats.h (Krzysztof
Wilczynski)
- Remove unused PRI and PASID stubs (Bjorn Helgaas)
- Removed unnecessary EXPORT_SYMBOL_GPL() from ATS, PRI, and PASID
interfaces that are only used by built-in IOMMU drivers (Bjorn
Helgaas)
- Hide PRI and PASID state restoration functions used only inside the
PCI core (Bjorn Helgaas)
- Add a DMA alias quirk for the Intel VCA NTB (Slawomir Pawlowski)
- Serialize sysfs sriov_numvfs reads vs writes (Pierre Crégut)
- Update Cavium ACS quirk for ThunderX2 and ThunderX3 (George
Cherian)
- Fix the UPDCR register address in the Intel ACS quirk (Steffen
Liebergeld)
- Unify ACS quirk implementations (Bjorn Helgaas)
Amlogic Meson host bridge driver:
- Fix meson PERST# GPIO polarity problem (Remi Pommarel)
- Add DT bindings for Amlogic Meson G12A (Neil Armstrong)
- Fix meson clock names to match DT bindings (Neil Armstrong)
- Add meson support for Amlogic G12A SoC with separate shared PHY
(Neil Armstrong)
- Add meson extended PCIe PHY functions for Amlogic G12A USB3+PCIe
combo PHY (Neil Armstrong)
- Add arm64 DT for Amlogic G12A PCIe controller node (Neil Armstrong)
- Add commented-out description of VIM3 USB3/PCIe mux in arm64 DT
(Neil Armstrong)
Broadcom iProc host bridge driver:
- Invalidate iProc PAXB address mapping before programming it
(Abhishek Shah)
- Fix iproc-msi and mvebu __iomem annotations (Ben Dooks)
Cadence host bridge driver:
- Refactor Cadence PCIe host controller to use as a library for both
host and endpoint (Tom Joseph)
Freescale Layerscape host bridge driver:
- Add layerscape LS1028a support (Xiaowei Bao)
Intel VMD host bridge driver:
- Add VMD bus 224-255 restriction decode (Jon Derrick)
- Add VMD 8086:9A0B device ID (Jon Derrick)
- Remove Keith from VMD maintainer list (Keith Busch)
Marvell ARMADA 3700 / Aardvark host bridge driver:
- Use LTSSM state to build link training flag since Aardvark doesn't
implement the Link Training bit (Remi Pommarel)
- Delay before training Aardvark link in case PERST# was asserted
before the driver probe (Remi Pommarel)
- Fix Aardvark issues with Root Control reads and writes (Remi
Pommarel)
- Don't rely on jiffies in Aardvark config access path since
interrupts may be disabled (Remi Pommarel)
- Fix Aardvark big-endian support (Grzegorz Jaszczyk)
Marvell ARMADA 370 / XP host bridge driver:
- Make mvebu_pci_bridge_emul_ops static (Ben Dooks)
Microsoft Hyper-V host bridge driver:
- Add hibernation support for Hyper-V virtual PCI devices (Dexuan
Cui)
- Track Hyper-V pci_protocol_version per-hbus, not globally (Dexuan
Cui)
- Avoid kmemleak false positive on hv hbus buffer (Dexuan Cui)
Mobiveil host bridge driver:
- Change mobiveil csr_read()/write() function names that conflict
with riscv arch functions (Kefeng Wang)
NVIDIA Tegra host bridge driver:
- Fix Tegra CLKREQ dependency programming (Vidya Sagar)
Renesas R-Car host bridge driver:
- Remove unnecessary header include from rcar (Andrew Murray)
- Tighten register index checking for rcar inbound range programming
(Marek Vasut)
- Fix rcar inbound range alignment calculation to improve packing of
multiple entries (Marek Vasut)
- Update rcar MACCTLR setting to match documentation (Yoshihiro
Shimoda)
- Clear bit 0 of MACCTLR before PCIETCTLR.CFINIT per manual
(Yoshihiro Shimoda)
- Add Marek Vasut and Yoshihiro Shimoda as R-Car maintainers (Simon
Horman)
Rockchip host bridge driver:
- Make rockchip 0V9 and 1V8 power regulators non-optional (Robin
Murphy)
Socionext UniPhier host bridge driver:
- Set uniphier to host (RC) mode always (Kunihiko Hayashi)
Endpoint drivers:
- Fix endpoint driver sign extension problem when shifting page
number to phys_addr_t (Alan Mikhak)
Misc:
- Add NumaChip SPDX header (Krzysztof Wilczynski)
- Replace EXTRA_CFLAGS with ccflags-y (Krzysztof Wilczynski)
- Remove unused includes (Krzysztof Wilczynski)
- Removed unused sysfs attribute groups (Ben Dooks)
- Remove PTM and ASPM dependencies on PCIEPORTBUS (Bjorn Helgaas)
- Add PCIe Link Control 2 register field definitions to replace magic
numbers in AMDGPU and Radeon CIK/SI (Bjorn Helgaas)
- Fix incorrect Link Control 2 Transmit Margin usage in AMDGPU and
Radeon CIK/SI PCIe Gen3 link training (Bjorn Helgaas)
- Use pcie_capability_read_word() instead of pci_read_config_word()
in AMDGPU and Radeon CIK/SI (Frederick Lawler)
- Remove unused pci_irq_get_node() Greg Kroah-Hartman)
- Make asm/msi.h mandatory and simplify PCI_MSI_IRQ_DOMAIN Kconfig
(Palmer Dabbelt, Michal Simek)
- Read all 64 bits of Switchtec part_event_bitmap (Logan Gunthorpe)
- Fix erroneous intel-iommu dependency on CONFIG_AMD_IOMMU (Bjorn
Helgaas)
- Fix bridge emulation big-endian support (Grzegorz Jaszczyk)
- Fix dwc find_next_bit() usage (Niklas Cassel)
- Fix pcitest.c fd leak (Hewenliang)
- Fix typos and comments (Bjorn Helgaas)
- Fix Kconfig whitespace errors (Krzysztof Kozlowski)"
* tag 'pci-v5.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (160 commits)
PCI: Remove PCI_MSI_IRQ_DOMAIN architecture whitelist
asm-generic: Make msi.h a mandatory include/asm header
Revert "nvme: Add quirk for Kingston NVME SSD running FW E8FK11.T"
PCI/MSI: Fix incorrect MSI-X masking on resume
PCI/MSI: Move power state check out of pci_msi_supported()
PCI/MSI: Remove unused pci_irq_get_node()
PCI: hv: Avoid a kmemleak false positive caused by the hbus buffer
PCI: hv: Change pci_protocol_version to per-hbus
PCI: hv: Add hibernation support
PCI: hv: Reorganize the code in preparation of hibernation
MAINTAINERS: Remove Keith from VMD maintainer
PCI/ASPM: Remove PCIEASPM_DEBUG Kconfig option and related code
PCI/ASPM: Add sysfs attributes for controlling ASPM link states
PCI: Fix indentation
drm/radeon: Prefer pcie_capability_read_word()
drm/radeon: Replace numbers with PCI_EXP_LNKCTL2 definitions
drm/radeon: Correct Transmit Margin masks
drm/amdgpu: Prefer pcie_capability_read_word()
PCI: uniphier: Set mode register to host mode
drm/amdgpu: Replace numbers with PCI_EXP_LNKCTL2 definitions
...
The struct pci_driver.suspend_late() hook is one of the legacy PCI power
management callbacks, and there are no remaining users of it. Remove it.
Link: https://lore.kernel.org/r/20191101204558.210235-7-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The struct pci_driver.resume_early() hook is one of the legacy PCI power
management callbacks, and there are no remaining users of it. Remove it.
Link: https://lore.kernel.org/r/20191101204558.210235-6-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Documentation/power/pci.rst is wrapped to fit in 80 columns, but directory
structure changes made a few lines longer. Wrap them so they all fit in 80
columns again.
Link: https://lore.kernel.org/r/20191014230016.240912-7-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Per PCIe r5.0 sec 7.5.2.1, PME may be generated from D0, so update
Documentation/power/pci.rst to reflect that.
Link: https://lore.kernel.org/r/20191016194450.68959-1-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
According to the documentation, pci_pm_thaw_noirq() did not put the device
into the full-power state and restore its standard configuration registers.
This is incorrect, so update the documentation to match the code.
Link: https://lore.kernel.org/r/20191014230016.240912-3-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Wrap to 80 columns. No textual change except to correct some "it's" that
should be "its".
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* pm-opp:
PM / OPP: Correct Documentation about library location
opp: of: Support multiple suspend OPPs defined in DT
dt-bindings: opp: Support multiple opp-suspend properties
opp: core: add regulators enable and disable
opp: Don't decrement uninitialized list_kref
* pm-qos:
PM: QoS: Get rid of unused flags
* acpi-pm:
ACPI: PM: Print debug messages on device power state changes
* pm-domains:
PM / Domains: Verify PM domain type in dev_pm_genpd_set_performance_state()
PM / Domains: Simplify genpd_lookup_dev()
PM / Domains: Align in-parameter names for some genpd functions
* pm-tools:
pm-graph: make setVal unbuffered again for python2 and python3
cpupower: update German translation
tools/power/cpupower: fix 64bit detection when cross-compiling
cpupower: Add missing newline at end of file
pm-graph v5.5
Pull operating performance points (OPP) framework changes for 5.4
from Viresh Kumar:
"This contains:
- OPP core fixes to better support genpd devices (Viresh Kumar).
- OPP core changes to support multiple suspend-opps in DT (Anson Huang).
- New OPP API (dev_pm_opp_find_level_exact()) and Qcom OPP binding
changes for CPR (Niklas Cassel).
- Qcom minor update (Sricharan R).
- OPP Documentation fix (Yue Hu).
- OPP core support to enable/disable regulators (k.konieczny)."
* 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
dt-bindings: opp: Add qcom-opp bindings with properties needed for CPR
dt-bindings: opp: qcom-nvmem: Support pstates provided by a power domain
dt-bindings: opp: qcom-nvmem: Make speedbin related properties optional
dt-bindings: opp: Re-organise kryo cpufreq to use it for other nvmem based qcom socs
PM / OPP: Correct Documentation about library location
opp: of: Support multiple suspend OPPs defined in DT
dt-bindings: opp: Support multiple opp-suspend properties
opp: core: add regulators enable and disable
opp: Don't decrement uninitialized list_kref
opp: Add dev_pm_opp_find_level_exact()
opp: Return genpd virtual devices from dev_pm_opp_attach_genpd()
opp: Not all power-domains are scalable
The network_latency and network_throughput flags for PM-QoS have not
found much use in drivers or in userspace since they were introduced.
Commit 4a733ef1be ("mac80211: remove PM-QoS listener") removed the
only user PM_QOS_NETWORK_LATENCY in the kernel a while ago and there
don't seem to be any userspace tools using the character device files
either.
PM_QOS_MEMORY_BANDWIDTH was never even added to the trace events.
Remove all the flags except cpu_dma_latency.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Lukasz Luba
Rafael J. Wysocki
Tang Yizhou
Ulf Hansson
Krzysztof Kozlowski
Linus Torvalds
Alan Stern
Mauro Carvalho Chehab
Bjorn Helgaas
Joe Perches
Daniel Lezcano
Krzysztof Wilczyński
Sumeet Pawnikar
Qais Yousef
Eric Biggers
Sakari Ailus
Randy Dunlap
Jonathan Neuschäfer
Amit Kucheria
Yue Hu