Граф коммитов

17 Коммитов

Автор SHA1 Сообщение Дата
Robert Jarzmik 1761b1076a ARM: pxa: remove platform dma code
As the last pxa related driver was converted to dmaengine, it's time to
kill the legacy dma code, which is not used anymore.

This finishes the pxa dmaengine transition.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2016-08-09 08:16:58 +02:00
Arnd Bergmann 377524dc4d ARM: mmp: move into ARCH_MULTIPLATFORM
With all dependencies taken care of, this enables building
the Marvell mmp platform as part of ARCH_MULTIPLATFORM, along
with other ARMv5 and ARMv7 platforms.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Andrew Lunn <andrew@lunn.ch>
2015-12-01 21:44:31 +01:00
Arnd Bergmann 74911e3a0e ARM: mmp: remove remaining legacy pxa-dma support
All drivers have stopped using this code, so we can just
as well stop initializing it.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-01 21:44:27 +01:00
Haojian Zhuang 49ea7fc094 ARM: pxa: remove pxa95x support
PXA95x isn't widely used. And it adds the effort on supporting
multiple platform. So remove it.

The assumption is that nobody will miss this support. If you are
reading this text because you actually require pxa95x support on
a new kernel, we can work out a way to revert this patch or add
support to the mmp platform.

Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-11-15 13:50:13 +01:00
Thierry Reding 17b2b4780f pwm: Move PXA PWM driver to PWM framework
This commit moves the PXA PWM driver to the drivers/pwm subdirectory and
converts it to use the new PWM framework.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-07-02 21:39:00 +02:00
Linus Walleij 354bf8010f ARM: 7103/1: plat-pxa: move PXA GPIO driver to GPIO subsystem
As per example from the other ARM boards, push the PXA
GPIO driver down to the GPIO subsystem so it can be consolidated.

Acked-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-01 23:41:41 +01:00
Haojian Zhuang a4553358d9 ARM: pxa: support pxa95x
The core of PXA955 is PJ4. Add new PJ4 support. And add new macro
CONFIG_PXA95x.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-12-18 21:02:14 +08:00
Eric Miao 09a5358d1e [ARM] pxa: move pmu device back into mach-pxa/
Not tested and enabled on MMP at this moment, and since the IRQ
is different from mach-pxa, I'd prefer to move the PMU device
back into mach-pxa/. Will introduce the PMU device to MMP once
it's enabled and tested.

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-05 14:32:19 +08:00
Jonathan Cameron cdb4acc056 [ARM] mmp: fix build failure due to IRQ_PMU depends on ARCH_PXA
PMU is not tested and enabled on MMP architecture at this moment,
the device IRQ number, IRQ_PMU depends on ARCH_PXA. Build PMU only
for ARCH_PXA.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-06-14 00:45:26 +08:00
Russell King ac1d426e82 Merge branch 'devel-stable' into devel
Conflicts:
	arch/arm/Kconfig
	arch/arm/include/asm/system.h
	arch/arm/mm/Kconfig
2010-05-17 17:24:04 +01:00
Haojian Zhuang 54c39b420f [ARM] pxa: move ssp into common plat-pxa
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11 17:24:58 +02:00
Will Deacon 3e9cc70590 ARM: 6049/1: ARM: pxa: register PMU IRQs during board initialisation
This patch adds an initcall for the pxa platforms so that they
register their PMU IRQs with the PMU framework in the Kernel.

Cc: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-29 18:08:05 +01:00
Eric Miao 3852ac7113 [ARM] pxa: move pwm.c to common plat-pxa directory
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05 10:32:04 +08:00
Eric Miao 707b2c247c [ARM] pxa: build arch/arm/plat-pxa/mfp.c only when PXA3xx or ARCH_MMP defined
arch/arm/plat-pxa/mfp.c is not intended to be use by PXA25x/PXA27x,
make it explicit here only for use by PXA3xx or ARCH_MMP.

Reported-by: Guennadi Liakhovestski <g.liakhovestski@gmx.de>
Reported-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-26 21:30:11 +08:00
Eric Miao f8dec04d33 [ARM] pxa: move common MFP handling code into plat-pxa
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23 10:11:34 +08:00
Eric Miao 38f539a608 [ARM] pxa: move common GPIO handling code into plat-pxa
1. add common GPIO handling code into [arch/arm/plat-pxa]

2. common code in <mach/gpio.h> moved into <plat/gpio.h>, new processors
   should implement its own <mach/gpio.h>, provide the following required
   definitions and '#include <plat/gpio.h>' in the end:

   - GPIO_REGS_VIRT for mapped virtual address of the GPIO registers'
     physical I/O memory

   - macros of GPLR(), GPSR(), GPDR() for constant optimization for
     functions gpio_{set,get}_value() (so that bit-bang code can still
     have tolerable performance)

   - NR_BUILTIN_GPIO for the number of onchip GPIO

   - definitions of __gpio_is_inverted() and __gpio_is_occupied(), they
     can be either macros or inlined functions

Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23 10:11:33 +08:00
Eric Miao bd5ce43323 [ARM] pxa: introduce plat-pxa for PXA common code and add DMA support
1. introduce folder of 'arch/arm/plat-pxa' for common code across different
   PXA processor families

2. initially moved DMA code into plat-pxa

3. common code in <mach/dma.h> moved into <plat/dma.h>, new processors
   should implement its own <mach/dma.h>, provide the following required
   definitions and '#include <plat/dma.h>' in the end:

   - DMAC_REGS_VIRT for mapped virtual address of the DMA registers'
     physical I/O memory

Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23 10:11:31 +08:00